2191 files changed, 609123 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
new file mode 100644
index 000000000..d93f01ddd
--- /dev/null
+++ b/arch/arm/boot/dts/Makefile
@@ -0,0 +1,1412 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+dtb-$(CONFIG_SOC_AT91RM9200) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9260ek.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91-kizbox.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+dtb-$(CONFIG_ARCH_ATLAS6) += \
+	atlas6-evb.dtb
+dtb-$(CONFIG_ARCH_ATLAS7) += \
+	atlas7-evb.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_63XX) += \
+	bcm963138dvt.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += \
+	berlin2-sony-nsz-gs7.dtb \
+	berlin2cd-google-chromecast.dtb \
+	berlin2cd-valve-steamlink.dtb \
+	berlin2q-marvell-dmp.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-lcdk.dtb \
+	da850-enbw-cmc.dtb \
+	da850-evm.dtb \
+	da850-lego-ev3.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_EFM32) += \
+	efm32gg-dk3750.dtb
+dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-artik5-eval.dtb \
+	exynos3250-monk.dtb \
+	exynos3250-rinato.dtb
+dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
+	exynos4210-origen.dtb \
+	exynos4210-smdkv310.dtb \
+	exynos4210-trats.dtb \
+	exynos4210-universal_c210.dtb \
+	exynos4412-i9300.dtb \
+	exynos4412-i9305.dtb \
+	exynos4412-itop-elite.dtb \
+	exynos4412-n710x.dtb \
+	exynos4412-odroidu3.dtb \
+	exynos4412-odroidx.dtb \
+	exynos4412-odroidx2.dtb \
+	exynos4412-origen.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos4412-tiny4412.dtb \
+	exynos4412-trats2.dtb
+dtb-$(CONFIG_ARCH_EXYNOS5) += \
+	exynos5250-arndale.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
+	exynos5250-spring.dtb \
+	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
+	exynos5410-smdk5410.dtb \
+	exynos5420-arndale-octa.dtb \
+	exynos5420-peach-pit.dtb \
+	exynos5420-smdk5420.dtb \
+	exynos5422-odroidhc1.dtb \
+	exynos5422-odroidxu3.dtb \
+	exynos5422-odroidxu3-lite.dtb \
+	exynos5422-odroidxu4.dtb \
+	exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb
+dtb-$(CONFIG_ARCH_KEYSTONE) += \
+	keystone-k2hk-evm.dtb \
+	keystone-k2l-evm.dtb \
+	keystone-k2e-evm.dtb \
+	keystone-k2g-evm.dtb \
+	keystone-k2g-ice.dtb
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-cloudbox.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
+	kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
+	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-net5big.dtb \
+	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-z0.dtb \
+	kirkwood-rd88f6281-a.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
+	kirkwood-topkick.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
+	lpc4350-hitex-eval.dtb \
+	lpc4357-ea4357-devkit.dtb \
+	lpc4357-myd-lpc4357.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
+dtb-$(CONFIG_ARCH_NPCM7XX) += \
+	nuvoton-npcm750-evb.dtb
+dtb-$(CONFIG_MACH_MESON6) += \
+	meson6-atv1200.dtb
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
+	pxa910-dkb.dtb \
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
+dtb-$(CONFIG_SOC_IMX1) += \
+	imx1-ads.dtb \
+	imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX27) += \
+	imx27-apf27.dtb \
+	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
+	imx27-pdk.dtb \
+	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+	imx31-bug.dtb \
+	imx31-lite.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+	imx50-evk.dtb \
+	imx50-kobo-aura.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
+	imx51-apf51.dtb \
+	imx51-apf51dev.dtb \
+	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb \
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
+	imx53-ard.dtb \
+	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
+	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
+	imx53-mba53.dtb \
+	imx53-ppd.dtb \
+	imx53-qsb.dtb \
+	imx53-qsrb.dtb \
+	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
+	imx53-voipac-bsb.dtb
+dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-apf6dev.dtb \
+	imx6dl-aristainetos_4.dtb \
+	imx6dl-aristainetos_7.dtb \
+	imx6dl-aristainetos2_4.dtb \
+	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-v1_1-eval-v3.dtb \
+	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
+	imx6dl-emcon-avari.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
+	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
+	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-nit6xlite.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
+	imx6dl-rex-basic.dtb \
+	imx6dl-riotboard.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
+	imx6dl-sabresd.dtb \
+	imx6dl-savageboard.dtb \
+	imx6dl-ts4900.dtb \
+	imx6dl-ts7970.dtb \
+	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8034-mb7.dtb \
+	imx6dl-tx6s-8035.dtb \
+	imx6dl-tx6s-8035-mb7.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-80xx-mb7.dtb \
+	imx6dl-tx6u-8033.dtb \
+	imx6dl-tx6u-8033-mb7.dtb \
+	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
+	imx6dl-udoo.dtb \
+	imx6dl-wandboard.dtb \
+	imx6dl-wandboard-revb1.dtb \
+	imx6dl-wandboard-revd1.dtb \
+	imx6dl-yapp4-draco.dtb \
+	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-ursa.dtb \
+	imx6q-apalis-eval.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apf6dev.dtb \
+	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-cm-fx6.dtb \
+	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5-tianma-tm070-1280x768.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
+	imx6q-emcon-avari.dtb \
+	imx6q-evi.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
+	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-h100.dtb \
+	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kp-tpc.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mccmon6.dtb \
+	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
+	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
+	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
+	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
+	imx6q-rex-pro.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb \
+	imx6q-savageboard.dtb \
+	imx6q-sbc6x.dtb \
+	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
+	imx6q-ts7970.dtb \
+	imx6q-tx6q-1010.dtb \
+	imx6q-tx6q-1010-comtft.dtb \
+	imx6q-tx6q-1020.dtb \
+	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
+	imx6q-tx6q-1036-mb7.dtb \
+	imx6q-tx6q-10x0-mb7.dtb \
+	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
+	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
+	imx6q-var-dt6customboard.dtb \
+	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6q-zii-rdu2.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-tx6qp-8037.dtb \
+	imx6qp-tx6qp-8037-mb7.dtb \
+	imx6qp-tx6qp-8137.dtb \
+	imx6qp-tx6qp-8137-mb7.dtb \
+	imx6qp-wandboard-revd1.dtb \
+	imx6qp-zii-rdu2.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+	imx6sl-evk.dtb \
+	imx6sl-tolino-shine2hd.dtb \
+	imx6sl-tolino-shine3.dtb \
+	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb \
+	imx6sll-kobo-clarahd.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb-reva.dtb \
+	imx6sx-sdb-sai.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-n6310-s.dtb \
+	imx6ul-kontron-n6310-s-43.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-opos6uldev.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ulz-14x14-evk.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7d-sdb-reva.dtb \
+	imx7d-sdb-sht11.dtb \
+	imx7d-zii-rmu2.dtb \
+	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-mba7.dtb \
+	imx7s-warp.dtb
+dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-moxa-uc-8410a.dtb \
+	ls1021a-qds.dtb \
+	ls1021a-tsn.dtb \
+	ls1021a-twr.dtb
+dtb-$(CONFIG_SOC_VF610) += \
+	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
+	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
+	vf610-cosmic.dtb \
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
+	vf610-zii-dev-rev-b.dtb \
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-scu4-aib.dtb \
+	vf610-zii-spb4.dtb \
+	vf610-zii-ssmb-dtu.dtb \
+	vf610-zii-ssmb-spu3.dtb
+dtb-$(CONFIG_ARCH_MXS) += \
+	imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10037.dtb \
+	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
+	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
+	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
+	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
+	imx28-ts4600.dtb \
+	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += \
+	ste-nomadik-s8815.dtb \
+	ste-nomadik-nhk15.dtb
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
+dtb-$(CONFIG_ARCH_OMAP2) += \
+	omap2420-h4.dtb \
+	omap2420-n800.dtb \
+	omap2420-n810.dtb \
+	omap2420-n810-wimax.dtb \
+	omap2430-sdp.dtb
+dtb-$(CONFIG_ARCH_OMAP3) += \
+	am3517-craneboard.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
+	omap3430-sdp.dtb \
+	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-beagle-xm-ab.dtb \
+	omap3-cm-t3517.dtb \
+	omap3-cm-t3530.dtb \
+	omap3-cm-t3730.dtb \
+	omap3-devkit8000.dtb \
+	omap3-devkit8000-lcd43.dtb \
+	omap3-devkit8000-lcd70.dtb \
+	omap3-echo.dtb \
+	omap3-evm.dtb \
+	omap3-evm-37xx.dtb \
+	omap3-gta04a3.dtb \
+	omap3-gta04a4.dtb \
+	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
+	omap3-ha.dtb \
+	omap3-ha-lcd.dtb \
+	omap3-igep0020.dtb \
+	omap3-igep0020-rev-f.dtb \
+	omap3-igep0030.dtb \
+	omap3-igep0030-rev-g.dtb \
+	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
+	omap3-n900.dtb \
+	omap3-n9.dtb \
+	omap3-n950.dtb \
+	omap3-overo-alto35.dtb \
+	omap3-overo-chestnut43.dtb \
+	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
+	omap3-overo-palo43.dtb \
+	omap3-overo-storm-alto35.dtb \
+	omap3-overo-storm-chestnut43.dtb \
+	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
+	omap3-overo-storm-palo43.dtb \
+	omap3-overo-storm-summit.dtb \
+	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
+	omap3-overo-summit.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
+	omap3-pandora-600mhz.dtb \
+	omap3-pandora-1ghz.dtb \
+	omap3-sbc-t3517.dtb \
+	omap3-sbc-t3530.dtb \
+	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
+	omap3-thunder.dtb \
+	omap3-zoom3.dtb
+dtb-$(CONFIG_SOC_TI81XX) += \
+	am3874-iceboard.dtb \
+	dm8148-evm.dtb \
+	dm8148-t410.dtb \
+	dm8168-evm.dtb \
+	dra62x-j5eco-evm.dtb
+dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-baltos-ir2110.dtb \
+	am335x-baltos-ir3220.dtb \
+	am335x-baltos-ir5221.dtb \
+	am335x-base0033.dtb \
+	am335x-bone.dtb \
+	am335x-boneblack.dtb \
+	am335x-boneblack-wireless.dtb \
+	am335x-boneblue.dtb \
+	am335x-bonegreen.dtb \
+	am335x-bonegreen-wireless.dtb \
+	am335x-chiliboard.dtb \
+	am335x-cm-t335.dtb \
+	am335x-evm.dtb \
+	am335x-evmsk.dtb \
+	am335x-guardian.dtb \
+	am335x-icev2.dtb \
+	am335x-lxm.dtb \
+	am335x-moxa-uc-2101.dtb \
+	am335x-moxa-uc-8100-me-t.dtb \
+	am335x-nano.dtb \
+	am335x-netcan-plus-1xx.dtb \
+	am335x-netcom-plus-2xx.dtb \
+	am335x-netcom-plus-8xx.dtb \
+	am335x-pdu001.dtb \
+	am335x-pepper.dtb \
+	am335x-phycore-rdk.dtb \
+	am335x-pocketbeagle.dtb \
+	am335x-regor-rdk.dtb \
+	am335x-sancloud-bbe.dtb \
+	am335x-shc.dtb \
+	am335x-sbc-t335.dtb \
+	am335x-sl50.dtb \
+	am335x-wega-rdk.dtb \
+	am335x-osd3358-sm-red.dtb
+dtb-$(CONFIG_ARCH_OMAP4) += \
+	omap4-droid-bionic-xt875.dtb \
+	omap4-droid4-xt894.dtb \
+	omap4-duovero-parlor.dtb \
+	omap4-kc1.dtb \
+	omap4-panda.dtb \
+	omap4-panda-a4.dtb \
+	omap4-panda-es.dtb \
+	omap4-sdp.dtb \
+	omap4-sdp-es23plus.dtb \
+	omap4-var-dvk-om44.dtb \
+	omap4-var-stk-om44.dtb
+dtb-$(CONFIG_SOC_AM43XX) += \
+	am43x-epos-evm.dtb \
+	am437x-cm-t43.dtb \
+	am437x-gp-evm.dtb \
+	am437x-idk-evm.dtb \
+	am437x-sbc-t43.dtb \
+	am437x-sk-evm.dtb
+dtb-$(CONFIG_SOC_OMAP5) += \
+	omap5-cm-t54.dtb \
+	omap5-igep0050.dtb \
+	omap5-sbc-t54.dtb \
+	omap5-uevm.dtb
+dtb-$(CONFIG_SOC_DRA7XX) += \
+	am57xx-beagle-x15.dtb \
+	am57xx-beagle-x15-revb1.dtb \
+	am57xx-beagle-x15-revc.dtb \
+	am5729-beagleboneai.dtb \
+	am57xx-cl-som-am57x.dtb \
+	am57xx-sbc-am57x.dtb \
+	am572x-idk.dtb \
+	am571x-idk.dtb \
+	am574x-idk.dtb \
+	dra7-evm.dtb \
+	dra72-evm.dtb \
+	dra72-evm-revc.dtb \
+	dra71-evm.dtb \
+	dra76-evm.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
+	orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
+	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
+dtb-$(CONFIG_ARCH_PICOXCELL) += \
+	picoxcell-pc7302-pc3x2.dtb \
+	picoxcell-pc7302-pc3x3.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += \
+	prima2-evb.dtb
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
+dtb-$(CONFIG_ARCH_OXNAS) += \
+	ox810se-wd-mbwe.dtb \
+	ox820-cloudengines-pogoplug-series-3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8060-dragonboard.dtb \
+	qcom-apq8064-cm-qs600.dtb \
+	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-apq8084-ifc6540.dtb \
+	qcom-apq8084-mtp.dtb \
+	qcom-ipq4019-ap.dk01.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
+	qcom-ipq4019-ap.dk07.1-c2.dtb \
+	qcom-ipq8064-ap148.dtb \
+	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb \
+	qcom-msm8974-fairphone-fp2.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-samsung-klte.dtb \
+	qcom-msm8974-sony-xperia-amami.dtb \
+	qcom-msm8974-sony-xperia-castor.dtb \
+	qcom-msm8974-sony-xperia-honami.dtb \
+	qcom-mdm9615-wp8548-mangoh-green.dtb
+dtb-$(CONFIG_ARCH_RDA) += \
+	rda8810pl-orangepi-2g-iot.dtb \
+	rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_RENESAS) += \
+	emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
+	r7s72100-gr-peach.dtb \
+	r7s72100-rskrza1.dtb \
+	r7s9210-rza2mevb.dtb \
+	r8a73a4-ape6evm.dtb \
+	r8a7740-armadillo800eva.dtb \
+	r8a7742-iwg21d-q7.dtb \
+	r8a7742-iwg21d-q7-dbcm-ca.dtb \
+	r8a7743-iwg20d-q7.dtb \
+	r8a7743-iwg20d-q7-dbcm-ca.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7744-iwg20d-q7.dtb \
+	r8a7744-iwg20d-q7-dbcm-ca.dtb \
+	r8a7745-iwg22d-sodimm.dtb \
+	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
+	r8a7745-sk-rzg1e.dtb \
+	r8a77470-iwg23s-sbc.dtb \
+	r8a7778-bockw.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
+	r8a7790-stout.dtb \
+	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
+	r8a7793-gose.dtb \
+	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
+	r9a06g032-rzn1d400-db.dtb \
+	sh73a0-kzm9g.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rv1108-elgin-r1.dtb \
+	rv1108-evb.dtb \
+	rk3036-evb.dtb \
+	rk3036-kylin.dtb \
+	rk3066a-bqcurie2.dtb \
+	rk3066a-marsboard.dtb \
+	rk3066a-mk808.dtb \
+	rk3066a-rayeager.dtb \
+	rk3188-bqedison2qc.dtb \
+	rk3188-px3-evb.dtb \
+	rk3188-radxarock.dtb \
+	rk3228-evb.dtb \
+	rk3229-evb.dtb \
+	rk3229-xms6.dtb \
+	rk3288-evb-act8846.dtb \
+	rk3288-evb-rk808.dtb \
+	rk3288-firefly-beta.dtb \
+	rk3288-firefly.dtb \
+	rk3288-firefly-reload.dtb \
+	rk3288-miqi.dtb \
+	rk3288-phycore-rdk.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-r89.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-rock-pi-n8.dtb \
+	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
+	rk3288-veyron-brain.dtb \
+	rk3288-veyron-fievel.dtb \
+	rk3288-veyron-jaq.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-mighty.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-pinky.dtb \
+	rk3288-veyron-speedy.dtb \
+	rk3288-veyron-tiger.dtb \
+	rk3288-vyasa.dtb
+dtb-$(CONFIG_ARCH_S3C24XX) += \
+	s3c2416-smdk2416.dtb
+dtb-$(CONFIG_ARCH_S3C64XX) += \
+	s3c6410-mini6410.dtb \
+	s3c6410-smdk6410.dtb
+dtb-$(CONFIG_ARCH_S5PV210) += \
+	s5pv210-aquila.dtb \
+	s5pv210-fascinate4g.dtb \
+	s5pv210-galaxys.dtb \
+	s5pv210-goni.dtb \
+	s5pv210-smdkc110.dtb \
+	s5pv210-smdkv210.dtb \
+	s5pv210-torbreck.dtb
+dtb-$(CONFIG_ARCH_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
+	socfpga_vt.dtb
+dtb-$(CONFIG_ARCH_SPEAR13XX) += \
+	spear1310-evb.dtb \
+	spear1340-evb.dtb
+dtb-$(CONFIG_ARCH_SPEAR3XX) += \
+	spear300-evb.dtb \
+	spear310-evb.dtb \
+	spear320-evb.dtb \
+	spear320-hmi.dtb
+dtb-$(CONFIG_ARCH_SPEAR6XX) += \
+	spear600-evb.dtb
+dtb-$(CONFIG_ARCH_STI) += \
+	stih407-b2120.dtb \
+	stih410-b2120.dtb \
+	stih410-b2260.dtb \
+	stih418-b2199.dtb
+dtb-$(CONFIG_ARCH_STM32) += \
+	stm32f429-disco.dtb \
+	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
+	stm32429i-eval.dtb \
+	stm32746g-eval.dtb \
+	stm32h743i-eval.dtb \
+	stm32h743i-disco.dtb \
+	stm32mp153c-dhcom-drc02.dtb \
+	stm32mp157a-avenger96.dtb \
+	stm32mp157a-dhcor-avenger96.dtb \
+	stm32mp157a-dk1.dtb \
+	stm32mp157a-iot-box.dtb \
+	stm32mp157a-stinger96.dtb \
+	stm32mp157c-dhcom-pdk2.dtb \
+	stm32mp157c-dk2.dtb \
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ev1.dtb \
+	stm32mp157c-lxa-mc1.dtb \
+	stm32mp157c-odyssey.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb	\
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb
+dtb-$(CONFIG_ARCH_TANGO) += \
+	tango4-vantage-1172.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
+	tegra20-harmony.dtb \
+	tegra20-colibri-eval-v3.dtb \
+	tegra20-colibri-iris.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
+	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
+	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
+	tegra124-nyan-blaze.dtb \
+	tegra124-venice2.dtb
+dtb-$(CONFIG_ARCH_U300) += \
+	ste-u300.dtb
+dtb-$(CONFIG_ARCH_U8500) += \
+	ste-snowball.dtb \
+	ste-hrefprev60-stuib.dtb \
+	ste-hrefprev60-tvk.dtb \
+	ste-hrefv60plus-stuib.dtb \
+	ste-hrefv60plus-tvk.dtb \
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-skomer.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld8-ref.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
+dtb-$(CONFIG_ARCH_VIRT) += \
+	xenvm-4.2.dtb
+dtb-$(CONFIG_ARCH_VT8500) += \
+	vt8500-bv07.dtb \
+	wm8505-ref.dtb \
+	wm8650-mid.dtb \
+	wm8750-apc8750.dtb \
+	wm8850-w70v2.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
+	zynq-microzed.dtb \
+	zynq-parallella.dtb \
+	zynq-zc702.dtb \
+	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
+	zynq-zed.dtb \
+	zynq-zturn.dtb \
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
+	armada-370-synology-ds213j.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
+	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
+	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-398-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-lenovo-ix4-300d.dtb \
+	armada-xp-linksys-mamba.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cubox.dtb \
+	dove-cubox-es.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6580-evbp1.dtb \
+	mt6589-aquaris5.dtb \
+	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8127-moose.dtb \
+	mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity3-msc313e-breadbee.dtb \
+	mstar-mercury5-ssc8336n-midrived08.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-arm-centriq2400-rep.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mihawk.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-swift.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-quanta-q71l.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
new file mode 100644
index 000000000..742fcf525
--- /dev/null
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+				};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			nand_controller: nand-controller {
+				nand: nand@3 {
+					partitions {
+						bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "uboot";
+							reg = <0x40000 0x80000>;
+						};
+
+						ubootenv@c0000 {
+							label = "ubootenv";
+							reg = <0xc0000 0x40000>;
+						};
+
+						kernel@100000 {
+							label = "kernel";
+							reg = <0x100000 0x400000>;
+						};
+
+						rootfs@500000 {
+							label = "rootfs";
+							reg = <0x500000 0x7b00000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		yellow {
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		blue {
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
new file mode 100644
index 000000000..c77e2c902
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
new file mode 100644
index 000000000..2ce603853
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/alpine-db.dts
new file mode 100644
index 000000000..dfb5a0802
--- /dev/null
+++ b/arch/arm/boot/dts/alpine-db.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include "alpine.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine Dev Board";
+	/* no need for anything outside SOC */
+};
+
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
new file mode 100644
index 000000000..3b0675a1c
--- /dev/null
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Annapurna Labs Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * Alternatively, redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   *   Redistributions of source code must retain the above copyright notice,
+ *       this list of conditions and the following disclaimer.
+ *
+ *   *   Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	/* SOC compatibility */
+	compatible = "al,alpine";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	/* CPU Configuration */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "al,alpine-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <1700000000>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <1700000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		arch-timer {
+			compatible = "arm,cortex-a15-timer",
+				     "arm,armv7-timer";
+			interrupts =
+				<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			clock-frequency = <50000000>;
+		};
+
+		/* Interrupt Controller */
+		gic: interrupt-controller@fb001000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfb001000 0x0 0x1000>,
+			      <0x0 0xfb002000 0x0 0x2000>,
+			      <0x0 0xfb004000 0x0 0x2000>,
+			      <0x0 0xfb006000 0x0 0x2000>;
+			interrupts =
+				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		/* CPU Resume registers */
+		cpu-resume@fbff5ec0 {
+			compatible = "al,alpine-cpu-resume";
+			reg = <0x0 0xfbff5ec0 0x0 0x30>;
+		};
+
+		/* North Bridge Service Registers */
+		sysfabric-service@fb070000 {
+			compatible = "al,alpine-sysfabric-service", "syscon";
+			reg = <0x0 0xfb070000 0x0 0x10000>;
+		};
+
+		/* Performance Monitor Unit */
+		pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: uart@fd883000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd883000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart1: uart@fd884000 {
+			compatible = "ns16550a";
+			reg = <0x0 0xfd884000 0x0 0x1000>;
+			clock-frequency = <375000000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* Internal PCIe Controller */
+		pcie@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* Add legacy interrupts for SATA devices only */
+			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+					<0x4800 0 0 1 &gic 0 44 4>;
+
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
new file mode 100644
index 000000000..56915b6d8
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
new file mode 100644
index 000000000..d8d60398d
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
new file mode 100644
index 000000000..8096d459b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 5221";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
new file mode 100644
index 000000000..9a79f727b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/*#include "am33xx.dtsi"*/
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		compatible = "gpio-leds";
+
+		power {
+			label = "onrisc:red:power";
+			linux,default-trigger = "default-on";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wlan {
+			label = "onrisc:blue:wlan";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		app {
+			label = "onrisc:green:app";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd2.gpio0_17 APP LED */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
new file mode 100644
index 000000000..77e23e736
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "vscom,onrisc", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7)      /* emu0.gpio3[7] */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7)      /* emu1.gpio3[8] */
+		>;
+	};
+
+	tps65910_pins: pinmux_tps65910_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		ti,nand-xfer-type = "polled";
+
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,elm-id = <&elm>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65910_pins>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	ti,en-ck32k-xtal = <1>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	phy1: ethernet-phy@1 {
+		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&gpio3_target {
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
new file mode 100644
index 000000000..89c00ce42
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
new file mode 100644
index 000000000..2d51d4bba
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spio0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	baseboard_eeprom: baseboard_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		baseboard_data: baseboard_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	cape_eeprom0: cape_eeprom0@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape0_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom1: cape_eeprom1@55 {
+		compatible = "atmel,24c256";
+		reg = <0x55>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape1_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom2: cape_eeprom2@56 {
+		compatible = "atmel,24c256";
+		reg = <0x56>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape2_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom3: cape_eeprom3@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape3_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
+	ti,pmic-shutdown-controller;
+
+	charger {
+		status = "okay";
+	};
+
+	pwrbutton {
+		status = "okay";
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
new file mode 100644
index 000000000..b5d85ef51
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
new file mode 100644
index 000000000..64c3e9269
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	non-removable;
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
new file mode 100644
index 000000000..86cad9912
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Black Wireless";
+	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio3 {
+	ls_buf_en {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
new file mode 100644
index 000000000..b4feb85e1
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		"[ethernet]",
+		"[ethernet]",
+		"P9_22 [spi0_sclk]",
+		"P9_21 [spi0_d0]",
+		"P9_18 [spi0_d1]",
+		"P9_17 [spi0_cs0]",
+		"[sd card]",
+		"P9_42A [ecappwm0]",
+		"P8_35 [hdmi]",
+		"P8_33 [hdmi]",
+		"P8_31 [hdmi]",
+		"P8_32 [hdmi]",
+		"P9_20 [i2c2_sda]",
+		"P9_19 [i2c2_scl]",
+		"P9_26 [uart1_rxd]",
+		"P9_24 [uart1_txd]",
+		"[ethernet]",
+		"[ethernet]",
+		"[usb]",
+		"[hdmi]",
+		"P9_41B",
+		"[ethernet]",
+		"P8_19 [ehrpwm2a]",
+		"P8_13 [ehrpwm2b]",
+		"[NC]",
+		"[NC]",
+		"P8_14",
+		"P8_17",
+		"[ethernet]",
+		"[ethernet]",
+		"P9_11 [uart4_rxd]",
+		"P9_13 [uart4_txd]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"P8_25 [emmc]",
+		"[emmc]",
+		"P8_5 [emmc]",
+		"P8_6 [emmc]",
+		"P8_23 [emmc]",
+		"P8_22 [emmc]",
+		"P8_3 [emmc]",
+		"P8_4 [emmc]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P8_12",
+		"P8_11",
+		"P8_16",
+		"P8_15",
+		"P9_15A",
+		"P9_23",
+		"P9_14 [ehrpwm1a]",
+		"P9_16 [ehrpwm1b]",
+		"[emmc]",
+		"[usr0 led]",
+		"[usr1 led]",
+		"[usr2 led]",
+		"[usr3 led]",
+		"[hdmi]",
+		"[usb]",
+		"[hdmi audio]",
+		"P9_12",
+		"P8_26",
+		"P8_21 [emmc]",
+		"P8_20 [emmc]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P9_15B",
+		"P8_18",
+		"P8_7",
+		"P8_8",
+		"P8_10",
+		"P8_9",
+		"P8_45 [hdmi]",
+		"P8_46 [hdmi]",
+		"P8_43 [hdmi]",
+		"P8_44 [hdmi]",
+		"P8_41 [hdmi]",
+		"P8_42 [hdmi]",
+		"P8_39 [hdmi]",
+		"P8_40 [hdmi]",
+		"P8_37 [hdmi]",
+		"P8_38 [hdmi]",
+		"P8_36 [hdmi]",
+		"P8_34 [hdmi]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"P8_27 [hdmi]",
+		"P8_29 [hdmi]",
+		"P8_28 [hdmi]",
+		"P8_30 [hdmi]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[i2c0]",
+		"[i2c0]",
+		"[emu]",
+		"[emu]",
+		"[ethernet]",
+		"[ethernet]",
+		"[NC]",
+		"[NC]",
+		"[usb]",
+		"P9_31 [spi1_sclk]",
+		"P9_29 [spi1_d0]",
+		"P9_30 [spi1_d1]",
+		"P9_28 [spi1_cs0]",
+		"P9_42B [ecappwm0]",
+		"P9_27",
+		"P9_41A",
+		"P9_25",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
new file mode 100644
index 000000000..c696d57cf
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Blue";
+	compatible = "ti,am335x-bone-blue", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		usr_0_led {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		usr_1_led {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		usr_2_led {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		usr_3_led {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		wifi_led {
+			label = "wifi";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "phy0assoc";
+		};
+
+		red_led {
+			label = "red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_1_led {
+			label = "bat25";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_2_led {
+			label = "bat50";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_3_led {
+			label = "bat75";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_4_led {
+			label = "bat100";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
+
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+		>;
+	};
+
+	/* UT0 */
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	/* UT1 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	/* GPS */
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
+		>;
+	};
+
+	/* DSM2 */
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+		>;
+	};
+
+	/* UT5 */
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U7) gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V7) gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R8) gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T8) gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U8) gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V8) gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R9) gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T9) gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5)	/* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5)	/* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* (M17) mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* (M18) mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
+		>;
+	};
+
+	/* DCAN */
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c0 {
+	baseboard_eeprom: baseboard_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		baseboard_data: baseboard_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mpu9250@68 {
+		compatible = "invensense,mpu9250";
+		reg = <0x68>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ax8975@c {
+				compatible = "ak,ak8975";
+				reg = <0x0c>;
+			};
+		};
+	};
+
+	pressure@76 {
+		compatible = "bosch,bmp280";
+		reg = <0x76>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	/delete-property/ ti,pmic-shutdown-controller;
+
+	charger {
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
+		status = "okay";
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rtc {
+	system-power-controller;
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+&gpio3 {
+	ls_buf_en {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
new file mode 100644
index 000000000..9f7fb6374
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
new file mode 100644
index 000000000..7615327d9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Green Wireless";
+	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us= <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio0 26 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_csn0.gpio1_29 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio1 {
+	ls_buf_en {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that     */
+/* intruces various issues (elp wkaeup timeouts etc.)                  */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding  */
+/* an external pulldown on U21 pin 4.                                  */
+
+&gpio3 {
+	bt_aud_in {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP0_AHCLKR";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000..18cc0f49e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
new file mode 100644
index 000000000..5660b5f69
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ */
+/dts-v1/;
+#include "am335x-chilisom.dtsi"
+
+/ {
+	model = "AM335x Chiliboard";
+	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
+		     "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_gpio_pins>;
+
+		led0 {
+			label = "led0";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb1_drvvbus: usb1_drvvbus {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	sd_pins: pinmux_sd_card {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	led_gpio_pins: led_gpio_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&ldo4_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+/* Ethernet */
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+};
+
+/* USB */
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_drvvbus>;
+	dr_mode = "host";
+};
+
+/* microSD */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins>;
+	vmmc-supply = <&ldo4_reg>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tps {
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NNMI */
+
+	charger {
+		status = "okay";
+	};
+
+	pwrbutton {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
new file mode 100644
index 000000000..43b61e43e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
+ * Author: Rostislav Lisovy <lisovy@jablotron.cz>
+ */
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Grinn AM335x ChiliSOM";
+	compatible = "grinn,am335x-chilisom", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3d";
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&rtc {
+	system-power-controller;
+
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+	};
+};
+
+/* NAND Flash */
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 000000000..08c89f176
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "CompuLab CM-T335";
+	compatible = "compulab,cm-t335", "ti,am33xx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;	/* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+		led0 {
+			label = "cm_t335:green";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* regulator for mmc */
+	vmmc_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "cm-t335";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,routing =
+			"Headphone Jack", "LHPOUT",
+			"Headphone Jack", "RHPOUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic Jack";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bluetooth_pins>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			/* uart0_ctsn.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+			/* uart0_rtsn.i2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn3.gpio2_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* gpmc_wpn.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.dcan0_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
+			/* uart1_rtsn.dcan0_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd.dcan1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
+			/* uart1_txd.dcan1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2)
+		>;
+	};
+
+	ecap0_pins: pinmux_ecap0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			/* mii1_tx_en.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	/* wl1271 bluetooth */
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	/* TLV320AIC23B codec */
+	mcasp1_pins: pinmux_mcasp1_pins {
+		pinctrl-single,pins = <
+			/* MII1_CRS.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* MII1_RX_ER.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* MII1_COL.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* RMII1_REF_CLK.mcasp1_axr3 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4)
+		>;
+	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	/* CM-T335 board EEPROM */
+	eeprom: 24c02@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+	/* Real Time Clock */
+	ext_rtc: em3027@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+	/* Audio codec */
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "spl";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@1 {
+			label = "uboot";
+			reg = <0x00200000 0x00100000>;
+		};
+		partition@2 {
+			label = "uboot environment";
+			reg = <0x00300000 0x00100000>;
+		};
+		partition@3 {
+			label = "dtb";
+			reg = <0x00400000 0x00100000>;
+		};
+		partition@4 {
+			label = "splash";
+			reg = <0x00500000 0x00400000>;
+		};
+		partition@5 {
+			label = "linux";
+			reg = <0x00900000 0x00600000>;
+		};
+		partition@6 {
+			label = "rootfs";
+			reg = <0x00F00000 0>;
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+};
+
+/* Touschscreen and analog digital converter */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x23 0x32>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* CPU audio */
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 16 serializers */
+		num-serializer = <16>;
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+
+		#sound-dai-cells= <0>;
+		status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
new file mode 100644
index 000000000..12dffccd1
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -0,0 +1,777 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x EVM";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	wlan_en_reg: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* WLAN_EN GPIO for this board - Bank1, pin16 */
+		gpio = <&gpio1 16 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* TPS79501 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS79501 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	matrix_keypad: matrix_keypad0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
+			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
+			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
+			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	panel {
+		compatible = "tfc,s9700rtwv43tr-01b";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		backlight = <&backlight>;
+
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000C0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001C0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001E0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00A00000 0x0F600000>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wlan_pins>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "disabled";	/* Enable only if Profile 1 is selected */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins_default>;
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
new file mode 100644
index 000000000..bf05b6827
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -0,0 +1,719 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 29 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	/* TPS79518 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS78633 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		switch4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
+	};
+
+	panel {
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+		backlight = <&lcd_bl>;
+
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) 		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
new file mode 100644
index 000000000..9594276ac
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Bosch AM335x Guardian";
+	compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		button21 {
+			label = "guardian-power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 21 0>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led1 {
+			label = "green:heartbeat";
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:mmc0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		display-timings {
+			320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <68>;
+				hfront-porch    = <20>;
+				hsync-len       = <1>;
+				vback-porch     = <18>;
+				vfront-porch    = <4>;
+				vsync-len       = <1>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <24>;
+			bus-width         = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+	};
+
+	guardian_beeper: pwm-7 {
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_beeper_pins>;
+		ti,clock-source = <0x01>;
+	};
+
+	vmmcsd_fixed: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		/*
+		 * MTD partition table
+		 *
+		 * All SPL-* partitions are sized to minimal length which can
+		 * be independently programmable. For NAND flash this is equal
+		 * to size of erase-block.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0x0 0x40000>;
+		};
+
+		partition@1 {
+			label = "SPL.backup1";
+			reg = <0x40000  0x40000>;
+		};
+
+		partition@2 {
+			label = "SPL.backup2";
+			reg = <0x80000  0x40000>;
+		};
+
+		partition@3 {
+			label = "SPL.backup3";
+			reg = <0xc0000  0x40000>;
+		};
+
+		partition@4 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+
+		partition@5 {
+			label = "u-boot.backup1";
+			reg = <0x200000 0x100000>;
+		};
+
+		partition@6 {
+			label = "u-boot-env";
+			reg = <0x300000 0x40000>;
+		};
+
+		partition@7 {
+			label = "u-boot-env.backup1";
+			reg = <0x340000 0x40000>;
+		};
+
+		partition@8 {
+			label = "UBI";
+			reg = <0x380000 0x1fc80000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&lcdc {
+	blue-and-red-wiring = "crossed";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&spi0 {
+	ti,pindir-d0-out-d1-in;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NMI */
+
+	backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <100>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &gpio_pins>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	guardian_beeper_pins: pinmux_dmtimer7_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
+		>;
+	};
+
+	gpio_keys_pins: pinmux_gpio_keys_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	gpio_pins: pinmux_gpio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	lcd_disen_pins: pinmux_lcd_disen_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_default: pinmux_lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
new file mode 100644
index 000000000..b958ab56a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM3359 ICE-V2";
+	compatible = "ti,am3359-icev2", "ti,am33xx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	/* Tricolor status LEDs */
+	leds1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+		>;
+	};
+
+	mmc0_pins_default: mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins_default: spi0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1, RMII mode */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			/* Slave 2, RMII mode */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wait0.rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_col.rmii2_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a11.rmii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a10.rmii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wpn.rmii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a5.rmii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a4.rmii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a0.rmii2_txen */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Slave 2 reset value */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: power-controller@2d {
+		reg = <0x2d>;
+	};
+
+	tpic2810: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_default>;
+
+	sn65hvs882@1 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "u-boot";
+			reg = <0x80000 0x100000>;
+			read-only;
+		};
+
+		partition@2 {
+			label = "u-boot-env";
+			reg = <0x180000 0x20000>;
+			read-only;
+		};
+
+		partition@3 {
+			label = "misc";
+			reg = <0x1A0000 0x660000>;
+		};
+	};
+
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <1 2 3 4 5 6 7>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1326000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0_target {
+	/* Do not idle the GPIO used for holding the VTT regulator */
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+	status = "okay";
+};
+
+&gpio3 {
+	p4 {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PR1_MII_CTRL";
+	};
+
+	p10 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+		output-high;
+		line-name = "MUX_MII_CTL1";
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	dual_emac;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
new file mode 100644
index 000000000..c9f354fc9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,elm-id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
new file mode 100644
index 000000000..0f0784652
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "NovaTech OrionLXm";
+	compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	/* Power supply provides a fixed 5V @2A */
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rxer */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii2_refclk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rxer */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk */
+
+			/* Slave 2 reset value*/
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_refclk */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	serial_config1: serial_config1@20 {
+		compatible = "nxp,pca9539";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	serial_config2: serial_config2@21 {
+		compatible = "nxp,pca9539";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	tps: tps@2d {
+		compatible = "ti,tps65910";
+		reg = <0x2d>;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		/* vrtc - unused */
+
+		vio_reg: regulator@1 {
+			regulator-name = "vio_1v5,ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd1,mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd2_1v1,core";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vdd3 - unused */
+
+		/* vdig1 - unused */
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "vdig2_1v8,vdds_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vpll - unused */
+
+		vdac_reg: regulator@8 {
+			regulator-name = "vdac_1v8,vdds";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "vaux1_1v8,usb";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "vaux2_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "vaux33_3v3,usb";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "vmmc_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <3>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	ethphy1: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
new file mode 100644
index 000000000..8121a1996
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: vmmcsd-regulator {
+	      compatible = "regulator-fixed";
+	      regulator-name = "vmmcsd_fixed";
+	      regulator-min-microvolt = <3300000>;
+	      regulator-max-microvolt = <3300000>;
+	      regulator-boot-on;
+	};
+
+	buttons: push_button {
+		compatible = "gpio-keys";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	push_button_pins: pinmux_push_button {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_23 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			/* eMMC */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad12.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad13.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad14.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad15.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad8.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad9.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad10.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad11.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart0 {
+	/* Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_wdt: rtc_wdt@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	status = "okay";
+};
+
+&cpsw_emac1 {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-0 = <&mmc1_pins_default>;
+	non-removable;
+	status = "okay";
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&push_button_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button@0 {
+		label = "push_button";
+		linux,code = <0x100>;
+		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	m25p80@0 {
+		compatible = "mx25l6405d";
+		spi-max-frequency = <40000000>;
+
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* reg : The partition's offset and size within the mtd bank. */
+			partitions@0 {
+				label = "MLO";
+				reg = <0x0 0x80000>;
+			};
+
+			partitions@1 {
+				label = "U-Boot";
+				reg = <0x80000 0x100000>;
+			};
+
+			partitions@2 {
+				label = "U-Boot Env";
+				reg = <0x180000 0x40000>;
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+
+	tpm_spi_tis@0 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
new file mode 100644
index 000000000..5923b6e7e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+	model = "Moxa UC-2101";
+	compatible = "moxa,uc-2101", "ti,am33xx";
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "UC2100:GREEN:USER";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	spi1_pins: pinmux_spi1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_ctsn.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_rtsn.spi1_d1 */
+		>;
+	};
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&cpsw_emac0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
new file mode 100644
index 000000000..39e5d2ce6
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: Johnson Chen <johnsonch.chen@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: vmmcsd-regulator {
+	      compatible = "regulator-fixed";
+	      regulator-name = "vmmcsd_fixed";
+	      regulator-min-microvolt = <3300000>;
+	      regulator-max-microvolt = <3300000>;
+	      regulator-boot-on;
+	};
+
+	buttons: push_button {
+		compatible = "gpio-keys";
+	};
+
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins>;
+
+	minipcie_pins: pinmux_minipcie {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_pclk.gpio2_24 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_ac_bias_en.gpio2_25 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_vsync.gpio2_22  Power off PIN*/
+		>;
+	};
+
+	push_button_pins: pinmux_push_button {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahcklx.gpio3_21 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_rtsn.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6)		/* lcd_data14.uart5_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6)  /* lcd_data15.uart5_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)     /* lcd_data9.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4)		/* lcd_data8.uart5_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)  /* rmii2_refclk */
+
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc0_pins_default: pinmux_mmc0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkx.gpio3_14 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)    /* mcasp0_aclkx.gpio3_18 */
+		>;
+	};
+
+	mmc2_pins_default: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			/* eMMC */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad8.mmc2_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad9.mmc2_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad10.mmc2_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad11.mmc2_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)     /* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+};
+
+&uart0 {
+	/* Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	/* UART 1 setting */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart5 {
+	/* UART 2 setting */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		compatible = "ti,tps65910";
+		reg = <0x2d>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_wdt: rtc_wdt@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	gpio_xten: gpio_xten@27 {
+		compatible = "nxp,pca9535";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+
+#include "tps65910.dtsi"
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			regulator-name = "vmmc_reg";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+};
+
+&cpsw_emac0 {
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	status = "okay";
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-0 = <&mmc0_pins_default>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+			&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-0 = <&mmc2_pins_default>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&push_button_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button@0 {
+		label = "push_button";
+		linux,code = <0x100>;
+		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	m25p80@0 {
+		compatible = "mx25l6405d";
+		spi-max-frequency = <40000000>;
+
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* reg : The partition's offset and size within the mtd bank. */
+		partitions@0 {
+			label = "MLO";
+			reg = <0x0 0x80000>;
+		};
+
+		partitions@1 {
+			label = "U-Boot";
+			reg = <0x80000 0x100000>;
+		};
+
+		partitions@2 {
+			label = "U-Boot Env";
+			reg = <0x180000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
new file mode 100644
index 000000000..0c7949d21
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: SZ Lin (林上智) <sz.lin@moxa.com>
+ */
+/dts-v1/;
+
+#include "am335x-moxa-uc-8100-common.dtsi"
+
+/ {
+	model = "Moxa UC-8100-ME-T";
+	compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "uc8100me:CEL1";
+			gpios = <&gpio_xten 8 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "uc8100me:CEL2";
+			gpios = <&gpio_xten 9 0>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "uc8100me:CEL3";
+			gpios = <&gpio_xten 10 0>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "uc8100me:DIA1";
+			gpios = <&gpio_xten 11 0>;
+			default-state = "off";
+		};
+		led5 {
+			label = "uc8100me:DIA2";
+			gpios = <&gpio_xten 12 0>;
+			default-state = "off";
+		};
+		led6 {
+			label = "uc8100me:DIA3";
+			gpios = <&gpio_xten 13 0>;
+			default-state = "off";
+		};
+		led7 {
+			label = "uc8100me:SD";
+			gpios = <&gpio_xten 14 0>;
+			default-state = "off";
+		};
+		led8 {
+			label = "uc8100me:USB";
+			gpios = <&gpio_xten 15 0>;
+			default-state = "off";
+		};
+		led9 {
+			label = "uc8100me:USER";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&i2c0 {
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+};
+
+&tps {
+	regulators {
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
new file mode 100644
index 000000000..0946fbf1b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Newflow AM335x NanoBone";
+	compatible = "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "nanobone:green:usr1";
+			gpios = <&gpio1 5 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&misc_pins>;
+
+	misc_pins: misc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+		>;
+	};
+
+	gpmc_pins: gpmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)		/* spi0_d0.uart2_txd */
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	uart4_pins: uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+		>;
+	};
+
+	uart5_pins: uart5_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)	/* emu1.gpio3[8] */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	gpio@20 {
+		compatible = "microchip,mcp23017";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom@53 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	compatible = "ti,am3352-gpmc";
+	ti,hwmods = "gpmc";
+	status = "okay";
+	gpmc,num-waitpins = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>,	/* CS0: NOR 128M */
+		 <1 0 0x1c000000 0x01000000>;	/* CS1: FRAM 16M */
+
+	nor@0,0 {
+		reg = <0 0x00000000 0x08000000>;
+		compatible = "cfi-flash";
+		linux,mtd-name = "spansion,s29gl010p11t";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,oe-on-ns = <40>;
+		gpmc,oe-off-ns = <160>;
+		gpmc,we-on-ns = <40>;
+		gpmc,we-off-ns = <160>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wr-data-mux-bus-ns = <70>;
+		gpmc,wr-access-ns = <80>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		MTD partition table
+		===================
+		+------------+-->0x00000000-> U-Boot start
+		|            |
+		|            |-->0x000BFFFF-> U-Boot end
+		|            |-->0x000C0000-> ENV1 start
+		|            |
+		|            |-->0x000DFFFF-> ENV1 end
+		|            |-->0x000E0000-> ENV2 start
+		|            |
+		|            |-->0x000FFFFF-> ENV2 end
+		|            |-->0x00100000-> Kernel start
+		|            |
+		|            |-->0x004FFFFF-> Kernel end
+		|            |-->0x00500000-> File system start
+		|            |
+		|            |-->0x01FFFFFF-> File system end
+		|            |-->0x02000000-> User data start
+		|            |
+		|            |-->0x03FFFFFF-> User data end
+		|            |-->0x04000000-> Data storage start
+		|            |
+		+------------+-->0x08000000-> NOR end (Free end)
+		*/
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@1 {
+			label = "env1";
+			reg = <0x000c0000 0x00020000>; /* 128KB */
+		};
+
+		partition@2 {
+			label = "env2";
+			reg = <0x000e0000 0x00020000>; /* 128KB */
+		};
+
+		partition@3 {
+			label = "kernel";
+			reg = <0x00100000 0x00400000>; /* 4MB */
+		};
+
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00500000 0x01b00000>; /* 27MB */
+		};
+
+		partition@5 {
+			label = "user";
+			reg = <0x02000000 0x02000000>; /* 32MB */
+		};
+
+		partition@6 {
+			label = "data";
+			reg = <0x04000000 0x04000000>; /* 64MB */
+		};
+	};
+
+	fram@1,0 {
+		reg = <1 0x00000000 0x01000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <20>;
+		gpmc,adv-wr-off-ns = <20>;
+		gpmc,oe-on-ns = <30>;
+		gpmc,oe-off-ns = <150>;
+		gpmc,we-on-ns = <30>;
+		gpmc,we-off-ns = <150>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <130>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,cycle2cycle-delay-ns = <10>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
+&mac {
+	dual_emac;
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo4_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 8 0>;
+	wp-gpios = <&gpio3 18 0>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* +1.5V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1450000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
new file mode 100644
index 000000000..8303b832a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCAN";
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "can_data";
+			linux,default-trigger = "netdev";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "can_error";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
new file mode 100644
index 000000000..f8e0e95a7
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
new file mode 100644
index 000000000..a4e137527
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dip_switches>;
+
+	dip_switches: pinmux_dip_switches {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&i2c1 {
+	tca6416a: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416b: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	tca6416c: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	phy-handle = <&phy1>;
+};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
new file mode 100644
index 000000000..f841afb27
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -0,0 +1,439 @@
+//SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Octavo Systems OSD3358-SM-RED";
+	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+
+	flash_enable: flash-enable {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) 	/* rmii1_ref_clk.gpio0_29 */
+		>;
+	};
+
+	imu_interrupt: imu-interrupt {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_rx_er.gpio3_2 */
+		>;
+	};
+
+	ethernet_interrupt: ethernet-interrupt{
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_col.gpio3_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 * AM335x errata for wiring:
+	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
+	 */
+
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: hdmi-encoder@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		port {
+			hdmi_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
+
+	mpu9250: imu@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ax8975@c {
+				compatible = "ak,ak8975";
+				reg = <0x0c>;
+			};
+		};
+		/*invensense,int_config = <0x10>;
+		invensense,level_shifter = <0>;
+		invensense,orientation = [01 00 00 00 01 00 00 00 01];
+		invensense,sec_slave_type = <0>;
+		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
+	};
+
+	bmp280: pressure@76 {
+		compatible = "bosch,bmp280";
+		reg = <0x76>;
+	};
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk-mcasp0-fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk-mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user-leds-s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	clkout2_pin: pinmux-clkout2-pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw-default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw-sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci-mdio-default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci-mdio-sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	emmc_pins: pinmux-emmc-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
new file mode 100644
index 000000000..2888b1599
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	* Octavo Systems:
+	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
+	* we get and we are not programming them during our production test.
+	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
+	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
+	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+	* EFUSE_SMA register reads as all zeros).
+	*/
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux-i2c0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
+	ti,pmic-shutdown-controller;
+
+	pwrbutton {
+		interrupts = <2>;
+		status = "okay";
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
new file mode 100644
index 000000000..fc465f0d7
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *	   Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Phytec AM335x PCM-953";
+	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	/* Power */
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		user-led0 {
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led1 {
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+
+	user_buttons: user_buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_buttons_pins>;
+
+		button@0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		button@1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+	};
+};
+
+&am33xx_pinmux {
+	user_buttons_pins: pinmux_user_buttons {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
+		>;
+	};
+
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
+		>;
+	};
+};
+
+/* CAN */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	dual_emac_res_vlan = <2>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac;
+};
+
+/* Misc */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cb_gpio_pins>;
+
+	cb_gpio_pins: pinmux_cb_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+/* USB */
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
new file mode 100644
index 000000000..d41a5ffd8
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -0,0 +1,575 @@
+/*
+ * pdu001.dts
+ *
+ * EETS GmbH PDU001 board device tree file
+ *
+ * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier:  GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+
+/ {
+	model = "EETS,PDU001";
+	compatible = "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			240x320p16 {
+				clock-frequency = <6500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hfront-porch = <6>;
+				hback-porch = <6>;
+				hsync-len = <1>;
+				vback-porch = <6>;
+				vfront-porch = <6>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_clk.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d0.i2c2_scl */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_aclkx.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_fsx.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* mcasp0_axr0.spi1_d1 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_ahclkr.spi1_cs0 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1)	/* spi0_cs1.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Port 1 (emac0) */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0)
+
+			/* Port 2 (emac1) */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* mii2_txen.gpmc_a0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1)		/* mii2_rxdv.gpmc_a1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd3.gpmc_a2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd2.gpmc_a3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd1.gpmc_a4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd0.gpmc_a5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1)		/* mii2_txclk.gpmc_a6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1)		/* mii2_rxclk.gpmc_a7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1)		/* mii2_rxd3.gpmc_a8 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1)		/* mii2_rxd2.gpmc_a9 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1)		/* mii2_rxd1.gpmc_a10 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1)		/* mii2_rxd0.gpmc_a11 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1)		/* mii2_crs.gpmc_wait0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1)		/* mii2_rxer.gpmc_wpn */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1)		/* mii2_col.gpmc_ben1 */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		/* eMMC */
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		/* SD cardcage */
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			/* card change signal for frontpanel SD cardcage */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7)		/* gpmc_advn_ale.gpio2_2 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <0 0>;
+	linux,rs485-enabled-at-boot-time;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	m2_eeprom: m2_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	board_24aa025e48: board_24aa025e48@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	backplane_24aa025e48: backplane_24aa025e48@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		reg = <0x60>;
+		psc0 = <0x97>;
+		pwm0 = <0x80>;
+		psc1 = <0x97>;
+		pwm1 = <0x10>;
+
+		run.red@0 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		run.green@1 {
+			type = <PCA9532_TYPE_LED>;
+			default-state = "on";
+		};
+		s2.red@2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s2.green@3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.yellow@4 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.green@5 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+
+	pca9530: pca9530@61 {
+		compatible = "nxp,pca9530";
+		reg = <0x61>;
+
+		tft-panel@0 {
+			type = <PCA9532_TYPE_LED>;
+			linux,default-trigger = "backlight";
+			default-state = "on";
+		};
+	};
+
+	mcp79400: mcp79400@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	display-controller@0 {
+		compatible = "orisetech,otm3225a";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		// SPI mode 3
+		spi-cpol;
+		spi-cpha;
+		status = "okay";
+	};
+};
+
+/*
+ * Disable soc's rtc as we have no VBAT for it. This makes the board
+ * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
+ */
+&rtc {
+	status = "disabled";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-name = "ldo_vrtc";
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-name = "buck_vdd_ddr";
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits */
+			regulator-name = "buck_vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits */
+			regulator-name = "buck_vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "boost_res";
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "ldo_vdig1";
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "ldo_vdig2";
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-name = "ldo_vpll";
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-name = "ldo_vdac";
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "ldo_vaux1";
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "ldo_vaux2";
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "ldo_vaux33";
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "ldo_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vbb_reg: regulator@13 {
+			regulator-name = "bat_vbb";
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac;			/* no switch, two distinct MACs */
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	non-removable;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
new file mode 100644
index 000000000..f9a027b47
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+	model = "Gumstix Pepper";
+	compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc3_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	buttons: user_buttons {
+		compatible = "gpio-keys";
+	};
+
+	leds: user_leds {
+		compatible = "gpio-leds";
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+	};
+
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+	};
+
+	v3v3c_reg: fixedregulator1 {
+		compatible = "regulator-fixed";
+	};
+
+	vdd5_reg: fixedregulator2 {
+		compatible = "regulator-fixed";
+	};
+};
+
+/* I2C Busses */
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	audio_codec: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
+	};
+
+	accel: lis331dlh@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+	i2c1_pins: pinmux_i2c1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+		>;
+	};
+};
+
+/* Accelerometer */
+&accel {
+	pinctrl-names = "default";
+	pinctrl-0 = <&accel_pins>;
+
+	Vdd-supply = <&ldo3_reg>;
+	Vdd_IO-supply = <&ldo3_reg>;
+	st,irq1-click;
+	st,wakeup-x-lo;
+	st,wakeup-x-hi;
+	st,wakeup-y-lo;
+	st,wakeup-y-hi;
+	st,wakeup-z-lo;
+	st,wakeup-z-hi;
+	st,min-limit-x = <92>;
+	st,max-limit-x = <14>;
+	st,min-limit-y = <14>;
+	st,max-limit-y = <92>;
+	st,min-limit-z = <92>;
+	st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+	accel_pins: pinmux_accel {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+		>;
+	};
+};
+
+/* Audio */
+&audio_codec {
+	status = "okay";
+
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	AVDD-supply = <&ldo3_reg>;
+	IOVDD-supply = <&ldo3_reg>;
+	DRVDD-supply = <&ldo3_reg>;
+	DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+	ti,model = "AM335x-EVM";
+	ti,audio-codec = <&audio_codec>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,codec-clock-rate = <12000000>;
+	ti,audio-routing =
+		"Headphone Jack",	"HPLOUT",
+		"Headphone Jack",	"HPROUT",
+		"MIC3L",		"Mic3L Switch";
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+
+	op-mode = <0>;	/* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		1 2 0 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+	audio_pins: pinmux_audio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+		>;
+	};
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+	panel-info {
+		ac-bias = <255>;
+		ac-bias-intrpt = <0>;
+		dma-burst-sz = <16>;
+		bpp = <32>;
+		fdd = <0x80>;
+		sync-edge = <0>;
+		sync-ctrl = <1>;
+		raster-order = <0>;
+		fifo-th = <0>;
+	};
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 480x272 {
+			clock-frequency = <18400000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vfront-porch = <4>;
+			vback-porch = <2>;
+			vsync-len = <10>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+		};
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	lcd_pins: pinmux_lcd {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+			/* Display Enable */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	status = "okay";
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+};
+
+
+&am33xx_pinmux {
+	ethernet_pins: pinmux_ethernet {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
+			/* ethernet interrupt */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			/* ethernet PHY nReset */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+/* MMC */
+&mmc1 {
+	/* Bootable SD card slot */
+	status = "okay";
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+	/* eMMC (not populated) on MMC #2 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&mmc3 {
+	/* Wifi & Bluetooth on MMC #3 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wireless_pins>;
+	vmmmc-supply = <&v3v3c_reg>;
+	bus-width = <4>;
+	non-removable;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+	sd_pins: pinmux_sd_card {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+		>;
+	};
+	emmc_pins: pinmux_emmc {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			/* EMMC nReset */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+		>;
+	};
+	wireless_pins: pinmux_wireless {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			/* WLAN nReset */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			/* WLAN nPower down */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			/* 32kHz Clock */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+	regulator-name = "v3v3c_reg";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+	regulator-name = "vdd5_reg";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	vin-supply = <&vbat>;
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	backlight {
+		isel = <1>; /* ISET1 */
+		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+		default-brightness = <80>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDD_1V8 system supply */
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
+		};
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+/* Touch Screen */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* UARTs */
+&uart0 {
+	/* Serial Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	/* Broken out to J6 header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+/* USB */
+&usb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+};
+
+&usb0 {
+        dr_mode = "host";
+};
+
+&usb1 {
+        dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	usb_pins: pinmux_usb {
+		pinctrl-single,pins = <
+			/* USB0 Over-Current (active low) */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			/* USB1 Over-Current (active low) */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+/* User IO */
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_leds_pins>;
+
+	led0 {
+		label = "pepper:user0:blue";
+		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+
+	led1 {
+		label = "pepper:user1:red";
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_buttons_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button0 {
+		label = "home";
+		linux,code = <KEY_HOME>;
+		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+		wakeup-source;
+	};
+
+	button1 {
+		label = "menu";
+		linux,code = <KEY_MENU>;
+		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		wakeup-source;
+	};
+
+	buttons2 {
+		label = "power";
+		linux,code = <KEY_POWER>;
+		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		wakeup-source;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+		>;
+	};
+
+	user_buttons_pins: pinmux_user_buttons {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts
new file mode 100644
index 000000000..43907d03e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-pcm-953.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+
+};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000..7e46b4c02
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Phytec AM335x phyCORE";
+	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rtc;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+/* Crypto Module */
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+/* EMMC */
+&am33xx_pinmux {
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet0_pins: pinmux_ethernet0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins>;
+	status = "okay";
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+	};
+
+	i2c_tmp102: temp@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		status = "disabled";
+	};
+
+	i2c_eeprom: eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+		nandflash_pins: pinmux_nandflash {
+			pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
+	nandflash: nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <30>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		ti,elm-id = <&elm>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "vdig1_1p8v";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	serial_flash: m25p80@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <48000000>;
+		reg = <0x0>;
+		m25p,fast-read;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
new file mode 100644
index 000000000..d526c5941
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+
+/ {
+	model = "TI AM335x PocketBeagle";
+	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_leds_pins>;
+
+		compatible = "gpio-leds";
+
+		usr0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		usr1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		usr2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		usr3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"P1.08 [SPI0_CLK]",
+		"P1.10 [SPI0_MISO]",
+		"P1.12 [SPI0_MOSI]",
+		"P1.06 [SPI0_CS]",
+		"[MMC0_CD]",
+		"P2.29 [SPI1_CLK]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"P1.26 [I2C2_SDA]",
+		"P1.28 [I2C2_SCL]",
+		"P2.11 [I2C1_SDA]",
+		"P2.09 [I2C1_SCL]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.31 [SPI1_CS]",
+		"P1.20 [PRU0.16]",
+		"[NC]",
+		"[NC]",
+		"P2.03",
+		"[NC]",
+		"[NC]",
+		"P1.34",
+		"P2.19",
+		"[NC]",
+		"[NC]",
+		"P2.05 [UART4_RX]",
+		"P2.07 [UART4_TX]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.25 [SPI1_MOSI]",
+		"P1.32 [UART0_RX]",
+		"P1.30 [UART0_TX]",
+		"P2.24",
+		"P2.33",
+		"P2.22",
+		"P2.18",
+		"[NC]",
+		"[NC]",
+		"P2.01 [PWM1A]",
+		"[NC]",
+		"P2.10",
+		"[USR LED 0]",
+		"[USR LED 1]",
+		"[USR LED 2]",
+		"[USR LED 3]",
+		"P2.06",
+		"P2.04",
+		"P2.02",
+		"P2.08",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P2.20",
+		"P2.17",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[EEPROM_WP]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.35 [AIN5]",
+		"P1.02 [AIN6]",
+		"P1.35 [PRU1.10]",
+		"P1.04 [PRU1.11]",
+		"[MMC0_DAT3]",
+		"[MMC0_DAT2]",
+		"[MMC0_DAT1]",
+		"[MMC0_DAT0]",
+		"[MMC0_CLK]",
+		"[MMC0_CMD]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[I2C0_SDA]",
+		"[I2C0_SCL]",
+		"[JTAG]",
+		"[JTAG]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P1.03 [USB1]",
+		"P1.36 [PWM0A]",
+		"P1.33 [PRU0.1]",
+		"P2.32 [PRU0.2]",
+		"P2.30 [PRU0.3]",
+		"P1.31 [PRU0.4]",
+		"P2.34 [PRU0.5]",
+		"P2.28 [PRU0.6]",
+		"P1.29 [PRU0.7]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
+
+&am33xx_pinmux {
+
+	pinctrl-names = "default";
+
+	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
+			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
+			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
+			&P2_17_gpio >;
+
+	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
+	P2_03_gpio: pinmux_P2_03_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
+	P1_34_gpio: pinmux_P1_34_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
+	P2_19_gpio: pinmux_P2_19_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
+	P2_24_gpio: pinmux_P2_24_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
+	P2_33_gpio: pinmux_P2_33_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
+	P2_22_gpio: pinmux_P2_22_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
+	P2_18_gpio: pinmux_P2_18_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
+	P2_10_gpio: pinmux_P2_10_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
+	P2_06_gpio: pinmux_P2_06_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
+	P2_04_gpio: pinmux_P2_04_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
+	P2_02_gpio: pinmux_P2_02_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
+	P2_08_gpio: pinmux_P2_08_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x00  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x00  0x00  0x10  0x18>;
+	};
+
+	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
+	P2_17_gpio: pinmux_P2_17_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+		>;
+	};
+
+	ehrpwm0_pins: pinmux-ehrpwm0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
+		>;
+	};
+
+	ehrpwm1_pins: pinmux-ehrpwm1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
+		>;
+	};
+
+	mmc0_pins: pinmux-mmc0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux-spi0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi1_pins: pinmux-spi1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
+		>;
+	};
+
+	usr_leds_pins: pinmux-usr-leds-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart4_pins: pinmux-uart4-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
+		>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm0_pins>;
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "otg";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts
new file mode 100644
index 000000000..66a1360b8
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
new file mode 100644
index 000000000..6fbf4ac73
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-REGOR";
+	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	vcc3v3: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		run_stop-led {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		error-led {
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+};
+
+/* User Leds */
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+		>;
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_gpios_pins>;
+
+	user_gpios_pins: pinmux_user_gpios {
+		pinctrl-single,pins = <
+			/* DIGIN 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
+			/* DIGOUT 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_rs485_pins>;
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
new file mode 100644
index 000000000..275ba339a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced";
+	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb_hub_ctrl: usb_hub_ctrl {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
+		>;
+	};
+
+	mpu6050_pins: pinmux_mpu6050_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
+		>;
+	};
+
+	lps3331ap_pins: pinmux_lps3331ap_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)     /* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+	lps331ap: barometer@5c {
+		compatible = "st,lps331ap-press";
+		st,drdy-int-pin = <1>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	mpu6050: accelerometer@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+	};
+
+	usb2512b: usb-hub@2c {
+		compatible = "microchip,usb2512b";
+		reg = <0x2c>;
+		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		/* wifi on port 4 */
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 000000000..81e445368
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+	model = "CompuLab CM-T335 on SB-T335";
+	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+	/* DRM display driver */
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			/* Timing selection performed by U-Boot */
+			timing0: lcd {/* 800x480p62 */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+			timing1: dvi { /* 1024x768p60 */
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				hfront-porch = <24>;
+				hback-porch = <160>;
+				hsync-len = <136>;
+				vactive = <768>;
+				vfront-porch = <3>;
+				vback-porch = <29>;
+				vsync-len = <6>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	/* Display */
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	/* GPIO extender */
+	gpio_ext: pca9555@26 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x26>;
+		dvi-ena-hog {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "dvi-enable";
+		};
+		lcd-ena-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "lcd-enable";
+		};
+	};
+};
+
+/* Display */
+&lcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 000000000..1eaa26533
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		back_button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front_button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: pwm@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc_rst {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc_prog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb_rst {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb_boot {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+	cpsw_emac0: slave@200 {
+		phy-mode = "mii";
+		phy-handle = <&ethernetphy0>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
new file mode 100644
index 000000000..f4684c8ea
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Toby Churchill SL50 Series";
+	compatible = "tcl,am335x-sl50", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led0 {
+			label = "sl50:red:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "sl50:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "sl50:red:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "sl50:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	backlight0: disp0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight0_pins>;
+		pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
+	};
+
+	backlight1: disp1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight1_pins>;
+		pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* audio external oscillator */
+		audio_mclk_fixed: oscillator@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;	/* 24.576MHz */
+		};
+
+		audio_mclk: audio_mclk_gate@0 {
+			compatible = "gpio-gate-clock";
+			#clock-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk_pins>;
+			clocks = <&audio_mclk_fixed>;
+			enable-gpios = <&gpio1 27 0>;
+		};
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		panel-info {
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			tft-alt-mode = <0>;
+			mono-8bit-mode = <0>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 960x128 {
+				clock-frequency = <18000000>;
+				hactive = <960>;
+				vactive = <272>;
+
+				hback-porch = <40>;
+				hfront-porch = <16>;
+				hsync-len = <24>;
+				hsync-active = <0>;
+
+				vback-porch = <3>;
+				vfront-porch = <8>;
+				vsync-len = <4>;
+				vsync-active = <0>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "sound-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_pa_pins>;
+
+		widgets = "Headphone", "Headphone Jack",
+			  "Speaker", "Speaker External",
+			  "Line", "Line In",
+			  "Microphone", "Microphone Jack";
+
+		routing = "Headphone Jack",	"HPLOUT",
+			  "Headphone Jack",	"HPROUT",
+			  "Amplifier",		"MONO_LOUT",
+			  "Speaker External",	"Amplifier",
+			  "LINE1R",		"Line In",
+			  "LINE1L",		"Line In",
+			  "MIC3L",		"Microphone Jack",
+			  "MIC3R",		"Microphone Jack",
+			  "Microphone Jack",	"Mic Bias";
+
+		dais = <&cpu_port>;
+
+		pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	emmc_pwrseq: pwrseq@0 {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_pwrseq_pins>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+
+	vdd_sys_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sys_reg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lwb_pins>;
+
+	audio_pins: pinmux_audio_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	audio_pa_pins: pinmux_audio_pa_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+		>;
+	};
+
+	audio_mclk_pins: pinmux_audio_mclk_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	backlight0_pins: pinmux_backlight0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)	/* gpmc_wen.gpio2_4 */
+		>;
+	};
+
+	backlight1_pins: pinmux_backlight1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* gpmc_wpn.uart4_txd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			/* Ethernet */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)	/* Ethernet_nRST - gpmc_ad14.gpio1_14 */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
+		>;
+	};
+
+	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
+		>;
+	};
+
+	rtc0_irq_pins: pinmux_rtc0_irq_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MOSI */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MISO */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS0 (NBATTSS) */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) */
+		>;
+	};
+
+	lwb_pins: pinmux_lwb_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
+			/* PDI Bus - Battery system */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+			/* FPGA */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_DONE - gpmc_ad8.gpio0_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_NRST - gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_RUN - gpmc_a1.gpio1_17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)	/* ENFPGA - gpmc_a9.gpio1_25 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc0_irq_pins>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
+		wakeup-source;
+		trickle-resistor-ohms = <2000>;
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	gpio_exp: mcp23017@20 {
+		compatible = "microchip,mcp23017";
+		reg = <0x20>;
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+
+	audio_codec: tlv320aic3106@1b {
+		status = "okay";
+		compatible = "ti,tlv320aic3106";
+		#sound-dai-cells = <0>;
+		reg = <0x1b>;
+		ai3x-micbias-vg = <2>;  /* 2.5V */
+
+		AVDD-supply = <&ldo4_reg>;
+		IOVDD-supply = <&ldo4_reg>;
+		DRVDD-supply = <&ldo4_reg>;
+		DVDD-supply = <&ldo3_reg>;
+
+		codec_port: port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+				clocks = <&audio_mclk>;
+			};
+		};
+	};
+
+	/* Ambient Light Sensor */
+	als: isl29023@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&usb0 {
+	dr_mode = "otg";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+	#sound-dai-cells = <0>;
+	op-mode = <0>;  /* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+
+	cpu_port: port {
+		cpu_endpoint: endpoint {
+			remote-endpoint = <&codec_endpoint>;
+
+			dai-format = "dsp_b";
+			bitclock-master = <&codec_port>;
+			frame-master = <&codec_port>;
+			bitclock-inversion;
+			clocks = <&audio_mclk>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	flash: n25q032@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q032";
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+
+	interrupt-parent = <&intc>;
+	interrupts = <7>;	/* NNMI */
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDDS_DDR */
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC / VIO / VDDS*/
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* VDD_3V3AUX */
+			regulator-always-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3A */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy-mode = "mii";
+	phy-handle = <&ethphy0>;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <100>;   /* PHY datasheet states 100us min */
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&am335x_adc {
+	ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000..866b5f0cb
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644
index 000000000..1359bf871
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-WEGA";
+	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux_mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rt-num-evt = <16>;
+	status = "okay";
+};
+
+&sound {
+	ti,model = "AM335x-Wega";
+	ti,audio-codec = <&tlv320aic3007>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,audio-routing =
+		"Line Out",		"LLOUT",
+		"Line Out",		"RLOUT",
+		"LINE1L",		"Line In",
+		"LINE1R",		"Line In";
+	clocks = <&mcasp0_fck>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
new file mode 100644
index 000000000..dced92a89
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+	sys_clkin_ck: sys_clkin_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck@490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck@480 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck@484 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@488 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@494 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck@498 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck@48c {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk@530 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck@914 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck@528 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck@508 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck@50c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck@510 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck@518 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck@51c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck@504 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck@47c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck@e4 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck@538 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+		reg = <0x053c>;
+	};
+
+	lcd_gclk: lcd_gclk@534 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck@52c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	clkout2_ck: clkout2_ck@700 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+};
+
+&prcm {
+	per_cm: per-cm@0 {
+		compatible = "ti,omap4-cm";
+		reg = <0x0 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x400>;
+
+		l4ls_clkctrl: l4ls-clkctrl@38 {
+			compatible = "ti,clkctrl";
+			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: l3s-clkctrl@1c {
+			compatible = "ti,clkctrl";
+			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3_clkctrl: l3-clkctrl@24 {
+			compatible = "ti,clkctrl";
+			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
+			#clock-cells = <2>;
+		};
+
+		l4hs_clkctrl: l4hs-clkctrl@120 {
+			compatible = "ti,clkctrl";
+			reg = <0x120 0x4>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
+			compatible = "ti,clkctrl";
+			reg = <0xe8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x18>;
+			#clock-cells = <2>;
+		};
+
+		lcdc_clkctrl: lcdc-clkctrl@18 {
+			compatible = "ti,clkctrl";
+			reg = <0x18 0x4>;
+			#clock-cells = <2>;
+		};
+
+		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
+			compatible = "ti,clkctrl";
+			reg = <0x14c 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	wkup_cm: wkup-cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x10>, <0xb4 0x24>;
+			#clock-cells = <2>;
+		};
+
+		l3_aon_clkctrl: l3-aon-clkctrl@14 {
+			compatible = "ti,clkctrl";
+			reg = <0x14 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
+			compatible = "ti,clkctrl";
+			reg = <0xb0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	mpu_cm: mpu-cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		mpu_clkctrl: mpu-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_rtc_cm: l4-rtc-cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gfx_l3_cm: gfx-l3-cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_cefuse_cm: l4-cefuse-cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x24>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
new file mode 100644
index 000000000..0d36e9dd1
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -0,0 +1,2139 @@
+&l4_wkup {						/* 0x44c00000 */
+	compatible = "ti,am33xx-l4-wkup", "simple-bus";
+	reg = <0x44c00000 0x800>,
+	      <0x44c00800 0x800>,
+	      <0x44c01000 0x400>,
+	      <0x44c01400 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x44c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
+	};
+
+	segment@100000 {					/* 0x44d00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
+			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
+			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
+			 <0x00082000 0x00182000 0x001000>;	/* ap 7 */
+
+		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x4000>;
+			status = "disabled";
+		};
+
+		target-module@80000 {			/* 0x44d80000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x2000>;
+		};
+	};
+
+	segment@200000 {					/* 0x44e00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x002000>,	/* ap 8 */
+			 <0x00002000 0x00202000 0x001000>,	/* ap 9 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
+			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
+			 <0x00020000 0x00220000 0x010000>,	/* ap 23 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 24 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 25 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 26 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 27 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 28 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 29 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 30 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 31 */
+			 <0x00038000 0x00238000 0x001000>,	/* ap 32 */
+			 <0x00039000 0x00239000 0x001000>,	/* ap 33 */
+			 <0x0003a000 0x0023a000 0x001000>,	/* ap 34 */
+			 <0x0003e000 0x0023e000 0x001000>,	/* ap 35 */
+			 <0x0003f000 0x0023f000 0x001000>,	/* ap 36 */
+			 <0x0000e000 0x0020e000 0x001000>,	/* ap 37 */
+			 <0x00040000 0x00240000 0x040000>,	/* ap 38 */
+			 <0x00080000 0x00280000 0x001000>;	/* ap 39 */
+
+		target-module@0 {			/* 0x44e00000, ap 8 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x2000>;
+
+			prcm: prcm@0 {
+				compatible = "ti,am3-prcm", "simple-bus";
+				reg = <0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7000 0x4>,
+			      <0x7010 0x4>,
+			      <0x7114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+
+			gpio0: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  82 8>,
+						<&am33xx_pinmux  8  52 4>,
+						<&am33xx_pinmux 12  94 4>,
+						<&am33xx_pinmux 16  71 2>,
+						<&am33xx_pinmux 18 135 1>,
+						<&am33xx_pinmux 19 108 2>,
+						<&am33xx_pinmux 21  73 1>,
+						<&am33xx_pinmux 22   8 2>,
+						<&am33xx_pinmux 26  10 2>,
+						<&am33xx_pinmux 28  74 1>,
+						<&am33xx_pinmux 29  81 1>,
+						<&am33xx_pinmux 30  28 2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <96>;
+			};
+		};
+
+		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9050 0x4>,
+			      <0x9054 0x4>,
+			      <0x9058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+
+			uart0: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <72>;
+				status = "disabled";
+				dmas = <&edma 26 0>, <&edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb000 0x8>,
+			      <0xb010 0x8>,
+			      <0xb090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			i2c0: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <70>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd000 0x4>,
+			      <0xd010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x0000d000 0x00001000>,
+				 <0x00001000 0x0000e000 0x00001000>;
+
+				tscadc: tscadc@0 {
+					compatible = "ti,am3359-tscadc";
+					reg = <0x0 0x1000>;
+					interrupts = <16>;
+					status = "disabled";
+					dmas = <&edma 53 0>, <&edma 57 0>;
+					dma-names = "fifo0", "fifo1";
+
+					tsc {
+						compatible = "ti,am3359-tsc";
+					};
+					am335x_adc: adc {
+						#io-channel-cells = <1>;
+						compatible = "ti,am3359-adc";
+					};
+				};
+		};
+
+		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x10000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00010000 0x00010000>,
+				 <0x00010000 0x00020000 0x00010000>;
+
+			scm: scm@0 {
+				compatible = "ti,am3-scm", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#pinctrl-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				am33xx_pinmux: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x238>;
+					#pinctrl-cells = <2>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x7f>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x800>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10>,
+					      <0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am3352-wkup-m3-ipc";
+					reg = <0x1324 0x24>;
+					interrupts = <78>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		timer1_target: target-module@31000 {	/* 0x44e31000, ap 25 40.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x31000 0x4>,
+			      <0x31010 0x4>,
+			      <0x31014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x31000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,am335x-timer-1ms";
+				reg = <0x0 0x400>;
+				interrupts = <67>;
+				ti,timer-alwon;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@33000 {			/* 0x44e33000, ap 27 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x33000 0x1000>;
+		};
+
+		target-module@35000 {			/* 0x44e35000, ap 29 50.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x35000 0x4>,
+			      <0x35010 0x4>,
+			      <0x35014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x35000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap3-wdt";
+				reg = <0x0 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		target-module@37000 {			/* 0x44e37000, ap 31 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x37000 0x1000>;
+		};
+
+		target-module@39000 {			/* 0x44e39000, ap 33 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x39000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x44e3e000, ap 35 60.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3e074 0x4>,
+			      <0x3e078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+			clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0x0 0x1000>;
+				interrupts = <75
+					      76>;
+			};
+		};
+
+		target-module@40000 {			/* 0x44e40000, ap 38 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x40000>;
+		};
+	};
+};
+
+&l4_fw {						/* 0x47c00000 */
+	compatible = "ti,am33xx-l4-fw", "simple-bus";
+	reg = <0x47c00000 0x800>,
+	      <0x47c00800 0x800>,
+	      <0x47c01000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x47c00000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x47c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 3 */
+			 <0x0000d000 0x0000d000 0x001000>,	/* ap 4 */
+			 <0x0000e000 0x0000e000 0x001000>,	/* ap 5 */
+			 <0x0000f000 0x0000f000 0x001000>,	/* ap 6 */
+			 <0x00010000 0x00010000 0x001000>,	/* ap 7 */
+			 <0x00011000 0x00011000 0x001000>,	/* ap 8 */
+			 <0x0001a000 0x0001a000 0x001000>,	/* ap 9 */
+			 <0x0001b000 0x0001b000 0x001000>,	/* ap 10 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 11 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 12 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 14 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 15 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 16 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 17 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 18 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 19 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 22 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 24 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 25 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 26 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 27 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 28 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 29 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 30 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 31 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 32 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 33 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 34 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 35 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 36 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 37 */
+			 <0x00015000 0x00015000 0x001000>;	/* ap 38 */
+
+		target-module@c000 {			/* 0x47c0c000, ap 3 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@e000 {			/* 0x47c0e000, ap 5 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x47c10000, ap 7 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x47c14000, ap 37 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x47c1a000, ap 9 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x47c24000, ap 11 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x47c26000, ap 13 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x47c28000, ap 29 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x47c30000, ap 15 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+		};
+
+		target-module@32000 {			/* 0x47c32000, ap 31 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+		};
+
+		target-module@38000 {			/* 0x47c38000, ap 17 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>;
+		};
+
+		target-module@3a000 {			/* 0x47c3a000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+		};
+
+		target-module@3c000 {			/* 0x47c3c000, ap 23 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x47c3e000, ap 21 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x47c40000, ap 24 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+		};
+
+		target-module@42000 {			/* 0x47c42000, ap 35 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+		};
+
+		target-module@44000 {			/* 0x47c44000, ap 27 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+		};
+
+		target-module@46000 {			/* 0x47c46000, ap 25 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+		};
+	};
+};
+
+&l4_fast {					/* 0x4a000000 */
+	compatible = "ti,am33xx-l4-fast", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
+			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
+			 <0x00180000 0x00180000 0x020000>,	/* ap 5 */
+			 <0x001a0000 0x001a0000 0x001000>,	/* ap 6 */
+			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
+			 <0x00280000 0x00280000 0x001000>,	/* ap 8 */
+			 <0x00300000 0x00300000 0x080000>,	/* ap 9 */
+			 <0x00380000 0x00380000 0x001000>;	/* ap 10 */
+
+		target-module@100000 {			/* 0x4a100000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x101200 0x4>,
+			      <0x101208 0x4>,
+			      <0x101204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x8000>;
+
+			mac: ethernet@0 {
+				compatible = "ti,am335x-cpsw","ti,cpsw";
+				clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+				clock-names = "fck", "cpts";
+				cpdma_channels = <8>;
+				ale_entries = <1024>;
+				bd_ram_size = <0x2000>;
+				mac_control = <0x20>;
+				slaves = <2>;
+				active_slave = <0>;
+				cpts_clock_mult = <0x80000000>;
+				cpts_clock_shift = <29>;
+				reg = <0x0 0x800
+				       0x1200 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/*
+				 * c0_rx_thresh_pend
+				 * c0_rx_pend
+				 * c0_tx_pend
+				 * c0_misc_pend
+				 */
+				interrupts = <40 41 42 43>;
+				ranges = <0 0 0x8000>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				davinci_mdio: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+					status = "disabled";
+				};
+
+				cpsw_emac0: slave@200 {
+					/* Filled in by U-Boot */
+					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 1>;
+				};
+
+				cpsw_emac1: slave@300 {
+					/* Filled in by U-Boot */
+					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 1>;
+				};
+			};
+		};
+
+		target-module@180000 {			/* 0x4a180000, ap 5 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x180000 0x20000>;
+		};
+
+		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x200000 0x80000>;
+		};
+
+		pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x326000 0x4>,
+			      <0x326004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x300000 0x80000>;
+			status = "disabled";
+		};
+	};
+};
+
+&l4_mpuss {						/* 0x4b140000 */
+	compatible = "ti,am33xx-l4-mpuss", "simple-bus";
+	reg = <0x4b144400 0x100>,
+	      <0x4b144800 0x400>;
+	reg-names = "la", "ap";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4b140000 0x008000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4b140000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00004800 0x00004800 0x000400>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 2 */
+			 <0x00004000 0x00004000 0x000400>,	/* ap 3 */
+			 <0x00005000 0x00005000 0x000400>,	/* ap 4 */
+			 <0x00000000 0x00000000 0x001000>,	/* ap 5 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 6 */
+			 <0x00000800 0x00000800 0x000800>;	/* ap 7 */
+
+		target-module@0 {			/* 0x4b140000, ap 5 02.2 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00001000>,
+				 <0x00001000 0x00001000 0x00001000>,
+				 <0x00002000 0x00002000 0x00001000>;
+		};
+
+		target-module@3000 {			/* 0x4b143000, ap 6 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,am33xx-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
+		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
+		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
+			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
+			 <0x00016000 0x00016000 0x001000>,	/* ap 8 */
+			 <0x00017000 0x00017000 0x001000>,	/* ap 9 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 10 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 11 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 12 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 13 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 15 */
+			 <0x00038000 0x00038000 0x002000>,	/* ap 16 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 17 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 18 */
+			 <0x00015000 0x00015000 0x001000>,	/* ap 19 */
+			 <0x0003c000 0x0003c000 0x002000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 22 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 23 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 24 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 25 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 26 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 27 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 28 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 29 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 30 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 31 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 32 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 33 */
+			 <0x00050000 0x00050000 0x002000>,	/* ap 34 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 35 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 36 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 37 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 38 */
+			 <0x00090000 0x00090000 0x001000>,	/* ap 39 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 40 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 41 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 77 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 78 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 85 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 86 */
+			 <0x000c8000 0x000c8000 0x001000>,	/* ap 87 */
+			 <0x000c9000 0x000c9000 0x001000>,	/* ap 88 */
+			 <0x000cc000 0x000cc000 0x001000>,	/* ap 89 */
+			 <0x000cd000 0x000cd000 0x001000>,	/* ap 90 */
+			 <0x000ca000 0x000ca000 0x001000>,	/* ap 91 */
+			 <0x000cb000 0x000cb000 0x001000>,	/* ap 92 */
+			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x48014000, ap 18 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x48016000, ap 8 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48022000, ap 10 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <73>;
+				status = "disabled";
+				dmas = <&edma 28 0>, <&edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@24000 {			/* 0x48024000, ap 12 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <74>;
+				status = "disabled";
+				dmas = <&edma 30 0>, <&edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4802a000, ap 14 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x8>,
+			      <0x2a010 0x8>,
+			      <0x2a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <71>;
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30110 0x4>,
+			      <0x30114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+
+			spi0: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <65>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 16 0
+					&edma 17 0
+					&edma 18 0
+					&edma 19 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@38000 {			/* 0x48038000, ap 16 02.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <80>, <81>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 8 2>,
+					<&edma 9 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x2000>,
+				 <0x46400000 0x46400000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46400000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <82>, <83>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 10 2>,
+					<&edma 11 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		timer2_target: target-module@40000 {	/* 0x48040000, ap 22 1e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>,
+			      <0x40014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <68>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>,
+			      <0x42014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <69>;
+			};
+		};
+
+		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>,
+			      <0x44014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <92>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>,
+			      <0x46014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <93>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48000 0x4>,
+			      <0x48010 0x4>,
+			      <0x48014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <94>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4a000 0x4>,
+			      <0x4a010 0x4>,
+			      <0x4a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <95>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4c000 {			/* 0x4804c000, ap 32 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>,
+			      <0x4c114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
+						<&am33xx_pinmux  8 90  4>,
+						<&am33xx_pinmux 12 12 16>,
+						<&am33xx_pinmux 28 30  4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <98>;
+			};
+		};
+
+		target-module@50000 {			/* 0x48050000, ap 34 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x2000>;
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 36 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x602fc 0x4>,
+			      <0x60110 0x4>,
+			      <0x60114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				dmas = <&edma 24 0>, <&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <4>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x480a0000, ap 40 5e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>;
+		};
+
+		target-module@c8000 {			/* 0x480c8000, ap 87 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc8000 0x4>,
+			      <0xc8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <77>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <8>;
+				mbox_wkupm3: wkup_m3 {
+					ti,mbox-send-noirq;
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <0 0 3>;
+				};
+			};
+		};
+
+		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xca000 0x4>,
+			      <0xca010 0x4>,
+			      <0xca014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xca000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+
+		target-module@cc000 {			/* 0x480cc000, ap 89 0e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x1000>;
+		};
+	};
+
+	segment@100000 {					/* 0x48100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 42 */
+			 <0x0008d000 0x0018d000 0x001000>,	/* ap 43 */
+			 <0x0008e000 0x0018e000 0x001000>,	/* ap 44 */
+			 <0x0008f000 0x0018f000 0x001000>,	/* ap 45 */
+			 <0x0009c000 0x0019c000 0x001000>,	/* ap 46 */
+			 <0x0009d000 0x0019d000 0x001000>,	/* ap 47 */
+			 <0x000a6000 0x001a6000 0x001000>,	/* ap 48 */
+			 <0x000a7000 0x001a7000 0x001000>,	/* ap 49 */
+			 <0x000a8000 0x001a8000 0x001000>,	/* ap 50 */
+			 <0x000a9000 0x001a9000 0x001000>,	/* ap 51 */
+			 <0x000aa000 0x001aa000 0x001000>,	/* ap 52 */
+			 <0x000ab000 0x001ab000 0x001000>,	/* ap 53 */
+			 <0x000ac000 0x001ac000 0x001000>,	/* ap 54 */
+			 <0x000ad000 0x001ad000 0x001000>,	/* ap 55 */
+			 <0x000ae000 0x001ae000 0x001000>,	/* ap 56 */
+			 <0x000af000 0x001af000 0x001000>,	/* ap 57 */
+			 <0x000b0000 0x001b0000 0x010000>,	/* ap 58 */
+			 <0x000c0000 0x001c0000 0x001000>,	/* ap 59 */
+			 <0x000cc000 0x001cc000 0x002000>,	/* ap 60 */
+			 <0x000ce000 0x001ce000 0x002000>,	/* ap 61 */
+			 <0x000d0000 0x001d0000 0x002000>,	/* ap 62 */
+			 <0x000d2000 0x001d2000 0x002000>,	/* ap 63 */
+			 <0x000d8000 0x001d8000 0x001000>,	/* ap 64 */
+			 <0x000d9000 0x001d9000 0x001000>,	/* ap 65 */
+			 <0x000a0000 0x001a0000 0x001000>,	/* ap 79 */
+			 <0x000a1000 0x001a1000 0x001000>,	/* ap 80 */
+			 <0x000a2000 0x001a2000 0x001000>,	/* ap 81 */
+			 <0x000a3000 0x001a3000 0x001000>,	/* ap 82 */
+			 <0x000a4000 0x001a4000 0x001000>,	/* ap 83 */
+			 <0x000a5000 0x001a5000 0x001000>;	/* ap 84 */
+
+		target-module@8c000 {			/* 0x4818c000, ap 42 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8c000 0x1000>;
+		};
+
+		target-module@8e000 {			/* 0x4818e000, ap 44 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8e000 0x1000>;
+		};
+
+		target-module@9c000 {			/* 0x4819c000, ap 46 5a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9c000 0x8>,
+			      <0x9c010 0x8>,
+			      <0x9c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <30>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa0000 0x4>,
+			      <0xa0110 0x4>,
+			      <0xa0114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x1000>;
+
+			spi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <125>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 42 0
+					&edma 43 0
+					&edma 44 0
+					&edma 45 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@a2000 {			/* 0x481a2000, ap 81 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x481a4000, ap 83 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa4000 0x1000>;
+		};
+
+		target-module@a6000 {			/* 0x481a6000, ap 48 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa6050 0x4>,
+			      <0xa6054 0x4>,
+			      <0xa6058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa6000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <44>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a8000 {			/* 0x481a8000, ap 50 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa8050 0x4>,
+			      <0xa8054 0x4>,
+			      <0xa8058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+		};
+
+		target-module@aa000 {			/* 0x481aa000, ap 52 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xaa050 0x4>,
+			      <0xaa054 0x4>,
+			      <0xaa058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xaa000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ac000 {			/* 0x481ac000, ap 54 38.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xac000 0x4>,
+			      <0xac010 0x4>,
+			      <0xac114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xac000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+                                gpio-ranges =	<&am33xx_pinmux  0 34 18>,
+						<&am33xx_pinmux 18 77  4>,
+						<&am33xx_pinmux 22 56 10>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xae000 0x4>,
+			      <0xae010 0x4>,
+			      <0xae114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xae000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  66 5>,
+						<&am33xx_pinmux  5  98 2>,
+						<&am33xx_pinmux  7  75 2>,
+						<&am33xx_pinmux 13 141 1>,
+						<&am33xx_pinmux 14 100 8>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <62>;
+			};
+		};
+
+		target-module@b0000 {			/* 0x481b0000, ap 58 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x10000>;
+		};
+
+		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
+				 <&dcan0_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x2000>;
+
+			dcan0: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 0>;
+				interrupts = <52>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
+				 <&dcan1_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd0000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 1>;
+				interrupts = <55>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d8000 {			/* 0x481d8000, ap 64 66.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xd82fc 0x4>,
+			      <0xd8110 0x4>,
+			      <0xd8114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd8000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@300000 {					/* 0x48300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 66 */
+			 <0x00001000 0x00301000 0x001000>,	/* ap 67 */
+			 <0x00002000 0x00302000 0x001000>,	/* ap 68 */
+			 <0x00003000 0x00303000 0x001000>,	/* ap 69 */
+			 <0x00004000 0x00304000 0x001000>,	/* ap 70 */
+			 <0x00005000 0x00305000 0x001000>,	/* ap 71 */
+			 <0x0000e000 0x0030e000 0x001000>,	/* ap 72 */
+			 <0x0000f000 0x0030f000 0x001000>,	/* ap 73 */
+			 <0x00018000 0x00318000 0x004000>,	/* ap 74 */
+			 <0x0001c000 0x0031c000 0x001000>,	/* ap 75 */
+			 <0x00010000 0x00310000 0x002000>,	/* ap 76 */
+			 <0x00012000 0x00312000 0x001000>,	/* ap 93 */
+			 <0x00015000 0x00315000 0x001000>,	/* ap 94 */
+			 <0x00016000 0x00316000 0x001000>,	/* ap 95 */
+			 <0x00017000 0x00317000 0x001000>,	/* ap 96 */
+			 <0x00013000 0x00313000 0x001000>,	/* ap 97 */
+			 <0x00014000 0x00314000 0x001000>,	/* ap 98 */
+			 <0x00020000 0x00320000 0x001000>,	/* ap 99 */
+			 <0x00021000 0x00321000 0x001000>,	/* ap 100 */
+			 <0x00022000 0x00322000 0x001000>,	/* ap 101 */
+			 <0x00023000 0x00323000 0x001000>,	/* ap 102 */
+			 <0x00024000 0x00324000 0x001000>,	/* ap 103 */
+			 <0x00025000 0x00325000 0x001000>;	/* ap 104 */
+
+		target-module@0 {			/* 0x48300000, ap 66 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap0: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <31>;
+					interrupt-names = "ecap0";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap1: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <47>;
+					interrupt-names = "ecap1";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap2: ecap@100 {
+					compatible = "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					interrupts = <61>;
+					interrupt-names = "ecap2";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xe000 0x4>,
+			      <0xe054 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, lcdc_clkdm */
+			clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			lcdc: lcdc@0 {
+				compatible = "ti,am33xx-tilcdc";
+				reg = <0x0 0x1000>;
+				interrupts = <36>;
+				status = "disabled";
+			};
+		};
+
+		target-module@10000 {			/* 0x48310000, ap 76 4e.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x11fe0 0x4>,
+			      <0x11fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <111>;
+			};
+		};
+
+		target-module@13000 {			/* 0x48313000, ap 97 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x13000 0x1000>;
+		};
+
+		target-module@15000 {			/* 0x48315000, ap 94 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00015000 0x00001000>,
+				 <0x00001000 0x00016000 0x00001000>;
+		};
+
+		target-module@18000 {			/* 0x48318000, ap 74 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x4000>;
+		};
+
+		target-module@20000 {			/* 0x48320000, ap 99 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48322000, ap 101 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x48324000, ap 103 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
new file mode 100644
index 000000000..3d064eb29
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -0,0 +1,648 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <dt-bindings/clock/am3.h>
+
+/ {
+	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		d-can0 = &dcan0;
+		d-can1 = &dcan1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			enable-method = "ti,am3352";
+			device_type = "cpu";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <90>;
+				min-residency-us = <300>;
+				ti,idle-wkup-m3;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		/*
+		 * The three following nodes are marked with opp-suspend
+		 * because the can not be enabled simultaneously on a
+		 * single SoC.
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0x06 0x0010>;
+			opp-suspend;
+		};
+
+		opp100-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0x00FF>;
+			opp-suspend;
+		};
+
+		opp100-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0020>;
+			opp-suspend;
+		};
+
+		opp100-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0040>;
+		};
+
+		opp120-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		opp120-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x06 0x0080>;
+		};
+
+		oppturbo-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x01 0xFFFF>;
+		};
+
+		oppturbo-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x06 0x0100>;
+		};
+
+		oppnitro-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0x04 0x0200>;
+		};
+	};
+
+	pmu@4b000000 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+		reg = <0x4b000000 0x1000000>;
+		ti,hwmods = "debugss";
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+			pm-sram = <&pm_sram_code
+				   &pm_sram_data>;
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the AM33XX interconnect.
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp: ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		l4_wkup: interconnect@44c00000 {
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000 0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+		};
+		l4_per: interconnect@48000000 {
+		};
+		l4_fw: interconnect@47c00000 {
+		};
+		l4_fast: interconnect@4a000000 {
+		};
+		l4_mpuss: interconnect@4b140000 {
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,am33xx-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				interrupts = <29>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		usb: target-module@47400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47400000 0x4>,
+			      <0x47400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
+			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47400000 0x8000>;
+
+			usb0_phy: usb-phy@1300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x1300 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb0: usb@1400 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x1400 0x400>,
+				      <0x1000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1_phy: usb-phy@1b00 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x1b00 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb1: usb@1800 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x1c00 0x400>,
+				      <0x1800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@2000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x0000 0x1000>,
+				       <0x2000 0x1000>,
+				       <0x3000 0x1000>,
+				       <0x4000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		ocmcram: sram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x10000>; /* 64k */
+			ranges = <0x0 0x40300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pm_sram_code: pm-code-sram@0 {
+				compatible = "ti,sram";
+				reg = <0x0 0x1000>;
+				protect-exec;
+			};
+
+			pm_sram_data: pm-data-sram@1000 {
+				compatible = "ti,sram";
+				reg = <0x1000 0x1000>;
+				pool;
+			};
+		};
+
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am3352";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+			interrupts = <101>;
+			sram = <&pm_sram_code
+				&pm_sram_data>;
+			ti,no-idle;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+			};
+		};
+
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			power-domains = <&prm_gfx>;
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+	};
+};
+
+#include "am33xx-l4.dtsi"
+#include "am33xx-clocks.dtsi"
+
+&prcm {
+	prm_per: prm@c00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xc00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_wkup: prm@d00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xd00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@f00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_gfx: prm@1100 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1100 0x100>;
+		#power-domain-cells = <0>;
+		#reset-cells = <1>;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
new file mode 100644
index 000000000..3642cfc80
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	vbat: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd2_reg>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc3 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		/*
+		 * Unused:
+		 * VDIG1=2.7V,300mA max
+		 * VDIG2=1.8V,300mA max
+		 */
+
+		vpll_reg: regulator@7 {
+			/* VDDS_DPLL_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			/* VDDS_SRAM_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			/* VDDA1P8V_USBPHY */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		/* VAUX33 unused */
+
+		vdac_reg: regulator@8 {
+			/* VDDA_DAC_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			/* VDDA3P3V_USBPHY */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_CORE */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDDSHV_3V3 */
+			regulator-name = "vdd_shv";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* VDD3 unused */
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
new file mode 100644
index 000000000..7d8f32bf7
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		Stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		Mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		Menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		Up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		Down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
new file mode 100644
index 000000000..9cc1ae36c
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+        vmmc_fixed: vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc_fixed";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		user_pb {
+			label = "User Push Button";
+			linux,code = <BTN_0>;
+			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_1 {
+			label = "User Switch 1";
+			linux,code = <BTN_1>;
+			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_2 {
+			label = "User Switch 2";
+			linux,code = <BTN_2>;
+			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_3 {
+			label = "User Switch 3";
+			linux,code = <BTN_3>;
+			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_4 {
+			label = "User Switch 4";
+			linux,code = <BTN_4>;
+			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_5 {
+			label = "User Switch 5";
+			linux,code = <BTN_5>;
+			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_6 {
+			label = "User Switch 6";
+			linux,code = <BTN_6>;
+			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_7 {
+			label = "User Switch 7";
+			linux,code = <BTN_7>;
+			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_8 {
+			label = "User Switch 8";
+			linux,code = <BTN_8>;
+			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		user_led_1 {
+			label = "am3517evm:green:user_led_1";
+			gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_2 {
+			label = "am3517evm:green:user_led_2";
+			gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_3 {
+			label = "am3517evm:green:user_led_3";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+		};
+
+		user_led_4 {
+			label = "am3517evm:green:user_led_4";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lcd0: display@0 {
+		/* This isn't the exact LCD, but the timings meet spec */
+		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+		label = "15";
+		backlight = <&bl>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+		vcc-supply = <&vdd_io_reg>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		power-supply = <&vdd_io_reg>;
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm11 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+	};
+
+	pwm11: pwm-11 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+		ti,clock-source = <0x01>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+		#phy-cells = <0>;
+	};
+};
+
+&davinci_emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	     status = "okay";
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vdd_io_reg>;
+	vdda_video-supply = <&vdd_io_reg>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	/* User DIP swithes [1:8] / User LEDS [1:2] */
+	tca6416: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
+};
+
+&mmc3 {
+      status = "disabled";
+};
+
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&omap3_pmx_core {
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
+		>;
+	};
+
+	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
new file mode 100644
index 000000000..f7b680f6c
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_core_reg>;
+		};
+	};
+
+	wl12xx_buffer: wl12xx_buf {
+		compatible = "regulator-fixed";
+		regulator-name = "wl1271_buf";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_buffer_pins>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+		regulator-always-on;
+		vin-supply = <&vdd_1v8_reg>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_wkup_pins>;
+		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&wl12xx_buffer>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name = "micron,mt29f4g16abchch";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	s35390a: s35390a@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins>;
+		interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+	};
+
+	tps: tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			vdd_core_reg: VDCDC1 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vdd_io_reg: VDCDC2 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_1v8_reg: VDCDC3 {
+				regulator-name = "vdd_1v8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb18_reg: LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb33_reg: LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	touchscreen: tsc2004@4b {
+		compatible = "ti,tsc2004";
+		reg = <0x4b>;
+
+		vio-supply = <&vdd_io_reg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mmc2 {
+	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+		max-speed = <3000000>;
+	};
+};
+
+&omap3_pmx_core {
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
+	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	rtc_pins: pinmux_rtc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 000000000..de33c4f89
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,197 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+/delete-node/ &aes2_target;
+
+/ {
+	aliases {
+		serial3 = &uart4;
+		can = &hecc;
+	};
+
+	cpus {
+		cpu: cpu@0 {
+			/* Based on OMAP3630 variants OPP50 and OPP100 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+		/*
+		 * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
+		 * appear to operate at 300MHz as well. Since AM3517 only
+		 * lists one operating voltage, it will remain fixed at 1.2V
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+		};
+	};
+
+	ocp@68000000 {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			clocks = <&emac_ick>;
+			clock-names = "ick";
+		};
+
+		davinci_mdio: mdio@5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&emac_fck>;
+			clock-names = "fck";
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		hecc: can@5c050000 {
+			compatible = "ti,am3517-hecc";
+			status = "disabled";
+			reg = <0x5c050000 0x80>,
+			      <0x5c053000 0x180>,
+			      <0x5c052000 0x200>;
+			reg-names = "hecc", "hecc-ram", "mbx";
+			interrupts = <24>;
+			clocks = <&hecc_ck>;
+		};
+
+		/*
+		 * On am3517 the OCP registers do not seem to be accessible
+		 * similar to the omap34xx. Maybe SGX is permanently set to
+		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+		 * write-only at 0x50000e10. We detect SGX based on the SGX
+		 * revision register instead of the unreadable OCP revision
+		 * register.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000014 0x4>;
+			reg-names = "rev";
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+	};
+};
+
+/* Not currently working, probably needs at least different clocks */
+&rng_target {
+	status = "disabled";
+	/delete-property/ clocks;
+};
+
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+	status = "disabled";
+};
+
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+#include "am35xx-clocks.dtsi"
+#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt1_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
new file mode 100644
index 000000000..e7d7124a3
--- /dev/null
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TeeJet Mt.Ventoux";
+	compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* AM35xx doesn't have IVA */
+	soc {
+		iva {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
new file mode 100644
index 000000000..220d0a527
--- /dev/null
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+	emac_ick: emac_ick@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x032c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck@32c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x032c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm_clocks {
+	ipss_ick: ipss_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi
new file mode 100644
index 000000000..2b994ae79
--- /dev/null
+++ b/arch/arm/boot/dts/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi
new file mode 100644
index 000000000..ab328e8c0
--- /dev/null
+++ b/arch/arm/boot/dts/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
new file mode 100644
index 000000000..9423e9fea
--- /dev/null
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Winterland IceBoard
+ *
+ * https://mcgillcosmology.com
+ * https://threespeedlogic.com
+ *
+ * This is an ARM + FPGA instrumentation board used at telescopes in
+ * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
+ * observatory in British Columbia (CHIME).
+ *
+ * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
+ */
+
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Winterland IceBoard";
+	compatible = "ti,dm8148", "ti,dm814";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* The MAC provides internal delay for the transmit path ONLY, which is enabled
+ * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
+ *
+ * The receive path is delayed at the PHY. The recommended register settings
+ * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
+ * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
+ * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
+ * obtain the correct register settings.
+ */
+&mac { dual_emac = <1>; };
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0x2>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0x1>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc1 { status = "disabled"; };
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+&mmc3 { status = "disabled"; };
+
+&i2c1 {
+	/* Most I2C activity happens through this port, with the sole exception
+	 * of the backplane. Since there are multiply assigned addresses, the
+	 * "i2c-mux-idle-disconnect" is important.
+	 */
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			/* FMC A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			/* FMC B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			/* QSFP A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			/* QSFP B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			/* SFP */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
+			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
+			ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
+
+			ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
+			ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
+			ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
+
+			ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
+			ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
+			ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
+			ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
+			ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
+			ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
+			ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
+			ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
+			ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
+		};
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			u41: pca9575@20 {
+				compatible = "nxp,pca9575";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
+					"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
+					"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
+					"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u42: pca9575@21 {
+				compatible = "nxp,pca9575";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
+					"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
+					"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
+					"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u48: pca9575@22 {
+				compatible = "nxp,pca9575";
+				reg=<0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
+					<&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
+				led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
+					<&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
+
+				gpio-line-names =
+					"GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
+					"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
+					"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
+					"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u59: pca9575@23 {
+				compatible = "nxp,pca9575";
+				reg=<0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
+					"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
+					"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
+					"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
+			tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
+			tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
+			tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
+
+			/* EEPROM bank and serial number are treated as separate devices */
+			at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+			at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+		};
+	};
+};
+
+&i2c2 {
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			multi-master;
+
+			/* All backplanes should have this -- it's how we know they're there. */
+			at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
+			at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+
+			/* 16 slot backplane */
+			tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
+			tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
+			amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
+
+			/* Single slot backplane */
+		};
+	};
+};
+
+&pincntl {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x0928, PIN_INPUT | 0x40)	/* SD1_SDWP */
+			DM814X_IOPAD(0x093C, PIN_INPUT | 0x2)	/* SD1_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80)	/* PROGRAM_B */
+			DM814X_IOPAD(0x0820, PIN_INPUT | 0x80)	/* INIT_B */
+			DM814X_IOPAD(0x0824, PIN_INPUT | 0x80)	/* DONE */
+
+			DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
+			DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
+			DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
+			DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
+			DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
+
+			DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
+			DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
+			DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
+			DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
+			DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
+
+			DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
+			DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
+			DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
+			DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
+			>;
+	};
+
+	gpio2_pins: pinmux_gpio2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
+			DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
+			DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
+			DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
+
+			//DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
+			//DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
+			DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			/* The PLL doesn't react well to the SPI controller reset, so
+			 * we force the CS lines to pull up as GPIOs until we're ready.
+			 * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
+			 */
+			DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
+			DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
+			DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
+			DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
+			DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
+			DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
+			DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
+		>;
+	};
+
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0a7c, 0x20)
+			DM814X_IOPAD(0x0b74, 0x20)
+			DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
+			DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
+			DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
+		>;
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+	gpio-line-names =
+		"", "PROGRAM_B", "INIT_B", "DONE",			/* 0-3 */
+		"", "", "", "",						/* 4-7 */
+		"FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI",		/* 8-11 */
+		"", "", "", "FMCA_TRST",				/* 12-15 */
+		"FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI",		/* 16-19 */
+		"FMCB_TRST", "", "", "",				/* 20-23 */
+		"FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI",		/* 24-27 */
+		"", "", "", "";						/* 28-31 */
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio2_pins>;
+	gpio-line-names =
+		"PHYA_IRQ_N", "PHYA_RESET_N", "", "",			/* 0-3 */
+		"", "", "", "PHYB_IRQ_N",				/* 4-7 */
+		"PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", "";		/* 8-11 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	/*pinctrl-0 = <&gpio3_pins>;*/
+	gpio-line-names =
+		"", "", "ARMClkSel0", "",				/* 0-3 */
+		"EnFPGARef", "", "", "ARMClkSel1";			/* 4-7 */
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+	gpio-line-names =
+		"BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
+		"BP_ARM_GPIO4", "BP_ARM_GPIO5";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
+
+&mcspi1 {
+	s25fl256@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		fsbl@0 {
+			/* 256 kB */
+			label = "U-Boot-min";
+			reg = <0 0x40000>;
+		};
+		ssbl@1 {
+			/* 512 kB */
+			label = "U-Boot";
+			reg = <0x40000 0x80000>;
+		};
+		bootenv@2 {
+			/* 256 kB */
+			label = "U-Boot Env";
+			reg = <0xc0000 0x40000>;
+		};
+		kernel@3 {
+			/* 4 MB */
+			label = "Kernel";
+			reg = <0x100000 0x400000>;
+		};
+		ipmi@4 {
+			label = "IPMI FRU";
+			reg = <0x500000 0x40000>;
+		};
+		fs@5 {
+			label = "File System";
+			reg = <0x540000 0x1ac0000>;
+		};
+	};
+};
+
+&mcspi3 {
+	/* DMA event numbers stolen from MCASP */
+	dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
+		&edma_xbar 10 0 18 &edma_xbar 11 0 19>;
+	dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	/* DMA event numbers stolen from MCASP, MCBSP */
+	dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
+	dma-names = "tx0", "rx0";
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
new file mode 100644
index 000000000..878406b12
--- /dev/null
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -0,0 +1,578 @@
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/am4.h>
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		spi0 = &qspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			compatible = "arm,cortex-a9";
+			enable-method = "ti,am4372";
+			device_type = "cpu";
+			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <300>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
+
+		opp120-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0xFF 0x08>;
+		};
+
+		oppturbo-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0xFF 0x10>;
+		};
+
+		oppnitro-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0xFF 0x20>;
+		};
+	};
+
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			pm-sram = <&pm_sram_code
+				   &pm_sram_data>;
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48281000 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	scu: scu@48240000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x48240000 0x100>;
+	};
+
+	global_timer: timer@48240200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x48240200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
+	local_timer: timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x100>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
+	cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	ocp@44000000 {
+		compatible = "ti,am4372-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+		ti,no-idle;
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: interconnect@44c00000 {
+			wkup_m3: wkup_m3@100000 {
+				compatible = "ti,am4372-wkup-m3";
+				reg = <0x100000 0x4000>,
+				      <0x180000	0x2000>;
+				reg-names = "umem", "dmem";
+				ti,hwmods = "wkup_m3";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+		};
+		l4_per: interconnect@48000000 {
+		};
+		l4_fast: interconnect@4a000000 {
+		};
+
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			ti,no-idle;
+			sram = <&pm_sram_code
+				&pm_sram_data>;
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <58 59>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				ti,needs-special-reset;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aes_target: target-module@53501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53501080 0x4>,
+			      <0x53501084 0x4>,
+			      <0x53501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53501000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 6 0>,
+				      <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		des_target: target-module@53701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53701030 0x4>,
+			      <0x53701034 0x4>,
+			      <0x53701038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x53701000 0x1000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 34 0>,
+				       <&edma 33 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		pruss_tm: target-module@54400000 {
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x54426000 0x4>,
+			      <0x54426004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54400000 0x80000>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		target-module@47900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47900000 0x4>,
+			      <0x47900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47900000 0x1000>,
+				 <0x30000000 0x30000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,am4372-qspi";
+				reg = <0 0x100>,
+				      <0x30000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks = <&dpll_per_m2_div4_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 138 0x4>;
+				num-cs = <4>;
+			};
+		};
+
+		ocmcram: sram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+			ranges = <0x0 0x40300000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pm_sram_code: pm-code-sram@0 {
+				compatible = "ti,sram";
+				reg = <0x0 0x1000>;
+				protect-exec;
+			};
+
+			pm_sram_data: pm-data-sram@1000 {
+				compatible = "ti,sram";
+				reg = <0x1000 0x1000>;
+				pool;
+			};
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			power-domains = <&prm_gfx>;
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+		};
+	};
+};
+
+#include "am437x-l4.dtsi"
+#include "am43xx-clocks.dtsi"
+
+&prcm {
+	prm_gfx: prm@400 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#power-domain-cells = <0>;
+		#reset-cells = <1>;
+	};
+
+	prm_per: prm@800 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x800 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_wkup: prm@2000 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x2000 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@4000 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x4000 0x100>;
+		#reset-cells = <1>;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 000000000..a83f46ed0
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+	model = "CompuLab CM-T43";
+	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ledb {
+			label = "cm-t43:green";
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vmmc_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cm_t43_led_pins>;
+
+	cm_t43_led_pins: cm_t43_led_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa78, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	emmc_pins: emmc_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0xa74, MUX_MODE3)
+			/* Slave 2 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
+			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
+			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
+			AM4372_IOPAD(0xa38, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MTD partition table */
+		partition@0 {
+			label = "kernel";
+			reg = <0x0 0x00980000>;
+		};
+		partition@980000 {
+			label = "dtb";
+			reg = <0x00980000 0x00080000>;
+		};
+		partition@a00000 {
+			label = "rootfs";
+			reg = <0x00a00000 0x0>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdcdc3";
+			regulator-suspend-enable;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	eeprom_module: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_3v3>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
+	dma-names = "tx0", "rx0";
+
+	flash: w25q64cvzpig@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x100000>;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&dwc3_2 {
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordiante-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+	operating-points = <1000000 1330000>,
+			   <800000 1260000>,
+			   <720000 1200000>,
+			   <600000 1100000>,
+			   <300000 950000>;
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
new file mode 100644
index 000000000..033b984ff
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -0,0 +1,1120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	evm_v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_v3_3d";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&matrix_keypad_default>;
+		pinctrl-1 = <&matrix_keypad_sleep>;
+
+		wakeup-source;
+
+		row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-GP-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&beeper_pins_default>;
+		pinctrl-1 = <&beeper_pins_sleep>;
+		gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
+	pinctrl-1 = <&wlan_pins_sleep>;
+
+	ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+		pinctrl-single,pins = <
+			0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	display_mux_pins: display_mux_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	dcan0_default: dcan0_default_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan0_sleep: dcan0_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
+		>;
+	};
+
+	dcan1_default: dcan1_default_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	dcan1_sleep: dcan1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_sleep_pins: mcasp1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	gpio0_pins: gpio0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+		>;
+	};
+
+	emmc_pins_default: emmc_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	emmc_pins_sleep: emmc_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+		>;
+	};
+
+	beeper_pins_default: beeper_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
+	beeper_pins_sleep: beeper_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
+	unused_pins: unused_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
+			AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	debugss_pins: pinmux_debugss_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart0_pins_sleep: uart0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	matrix_keypad_default: matrix_keypad_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
+			AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
+			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	matrix_keypad_sleep: matrix_keypad_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
+			AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
+			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart0_pins_default>;
+	pinctrl-1 = <&uart0_pins_sleep>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdcdc3";
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
+		};
+
+		dcdc5: regulator-dcdc5 {
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * 0x264 represents the offset of padconf register of
+		 * gpio3_22 from am43xx_pinmux base.
+		 */
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		wakeup-source;
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins>;
+	status = "okay";
+
+	p23 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		/* SelEMMCorNAND selects between eMMC and NAND:
+		 * Low: NAND
+		 * High: eMMC
+		 * When changing this line make sure the newly
+		 * selected device node is enabled and the previously
+		 * selected device node is disabled.
+		 */
+		output-low;
+		line-name = "SelEMMCorNAND";
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
+	status = "okay";
+
+	p8 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&evm_v3_3d>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+/* eMMC sits on mmc2 */
+&mmc2 {
+	/*
+	 * When enabling eMMC, disable GPMC/NAND and set
+	 * SelEMMCorNAND to output-high
+	 */
+	status = "disabled";
+	vmmc-supply = <&evm_v3_3d>;
+	bus-width = <8>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_sleep>;
+	non-removable;
+};
+
+&mmc3 {
+	status = "okay";
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	 * When enabling GPMC, disable eMMC and set
+	 * SelEMMCorNAND to output-low
+	 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dcan0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan0_default>;
+	pinctrl-1 = <&dcan0_sleep>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan1_default>;
+	pinctrl-1 = <&dcan1_sleep>;
+	status = "okay";
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			remote-endpoint = <&ov2659_1>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			remote-endpoint = <&ov2659_0>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
new file mode 100644
index 000000000..2dc525512
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x Industrial Development Kit";
+	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	v24_0d: fixed-regulator-v24_0d {
+		compatible = "regulator-fixed";
+		regulator-name = "V24_0D";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixed-regulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_corereg: fixed-regulator-vdd_corereg {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_COREREG";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_core: fixed-regulator-vdd_core {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_CORE";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_corereg>;
+	};
+
+	v1_8dreg: fixed-regulator-v1_8dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8DREG";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_8d: fixed-regulator-v1_8d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8D";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_8dreg>;
+	};
+
+	v1_5dreg: fixed-regulator-v1_5dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5DREG";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_5d: fixed-regulator-v1_5d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5D";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_5dreg>;
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0 {
+			label = "power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am43xx_pinmux {
+	gpio_keys_pins_default: gpio_keys_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c0_pins_sleep: i2c0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins_default: i2c2_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+		>;
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	spi1_pins_default: spi1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
+			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
+			AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)	/* rmii1_ref_clk.spi1_cs0 */
+			AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)	/* mii1_crs.gpio3_1 */
+		>;
+	};
+
+	spi1_pins_sleep: spi1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins_default: backlight_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	qspi_pins_default: qspi_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	qspi_pins_sleep: qspi_pins_sleep{
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_sleep>;
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	tps: tps62362@60 {
+		compatible = "ti,tps62362";
+		reg = <0x60>;
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		vin-supply = <&v3_3d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_default>;
+	pinctrl-1 = <&i2c2_pins_sleep>;
+	clock-frequency = <100000>;
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	vmmc-supply = <&v3_3d>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_pins_default>;
+	pinctrl-1 = <&qspi_pins_sleep>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * MTD partition table.  The ROM checks the first 512KiB for a
+		 * valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&tps>;
+};
+
+&cpu0_opp_table {
+	/*
+	 * Supply voltage supervisor on board will not allow opp50 so
+	 * disable it and set opp100 as suspend OPP.
+	 */
+	opp50-300000000 {
+		status = "disabled";
+	};
+
+	opp100-600000000 {
+		opp-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
new file mode 100644
index 000000000..86bf668f3
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -0,0 +1,2529 @@
+&l4_wkup {						/* 0x44c00000 */
+	compatible = "ti,am4-l4-wkup", "simple-bus";
+	reg = <0x44c00000 0x800>,
+	      <0x44c00800 0x800>,
+	      <0x44c01000 0x400>,
+	      <0x44c01400 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x44c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
+	};
+
+	segment@100000 {					/* 0x44d00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
+			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
+			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
+			 <0x00082000 0x00182000 0x001000>,	/* ap 7 */
+			 <0x000f0000 0x001f0000 0x010000>;	/* ap 8 */
+
+		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x4000>;
+		};
+
+		target-module@80000 {			/* 0x44d80000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x2000>;
+		};
+
+		target-module@f0000 {			/* 0x44df0000, ap 8 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf0000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf0000 0x10000>;
+
+			prcm: prcm@0 {
+				compatible = "ti,am4-prcm", "simple-bus";
+				reg = <0x0 0x11000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x11000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x44e00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x001000>,	/* ap 9 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
+			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 23 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 24 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 25 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 26 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 27 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 28 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 29 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 30 */
+			 <0x00038000 0x00238000 0x001000>,	/* ap 31 */
+			 <0x00039000 0x00239000 0x001000>,	/* ap 32 */
+			 <0x0003a000 0x0023a000 0x001000>,	/* ap 33 */
+			 <0x0003e000 0x0023e000 0x001000>,	/* ap 34 */
+			 <0x0003f000 0x0023f000 0x001000>,	/* ap 35 */
+			 <0x00040000 0x00240000 0x040000>,	/* ap 36 */
+			 <0x00080000 0x00280000 0x001000>,	/* ap 37 */
+			 <0x00088000 0x00288000 0x008000>,	/* ap 38 */
+			 <0x00092000 0x00292000 0x001000>,	/* ap 39 */
+			 <0x00086000 0x00286000 0x001000>,	/* ap 40 */
+			 <0x00087000 0x00287000 0x001000>,	/* ap 41 */
+			 <0x00090000 0x00290000 0x001000>,	/* ap 42 */
+			 <0x00091000 0x00291000 0x001000>;	/* ap 43 */
+
+		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		target-module@7000 {			/* 0x44e07000, ap 14 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7000 0x4>,
+			      <0x7010 0x4>,
+			      <0x7114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+
+			gpio0: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9050 0x4>,
+			      <0x9054 0x4>,
+			      <0x9058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+
+			uart0: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb000 0x8>,
+			      <0xb010 0x8>,
+			      <0xb090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			i2c0: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd000 0x4>,
+			      <0xd010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */
+			clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd000 0x1000>;
+
+			tscadc: tscadc@0 {
+				compatible = "ti,am3359-tscadc";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
+				status = "disabled";
+				dmas = <&edma 53 0>, <&edma 57 0>;
+				dma-names = "fifo0", "fifo1";
+
+				tsc {
+					compatible = "ti,am3359-tsc";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am3359-adc";
+				};
+
+			};
+		};
+
+		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x10000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x10000>;
+
+			scm: scm@0 {
+				compatible = "ti,am4-scm", "simple-bus";
+				reg = <0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x4000>;
+
+				am43xx_pinmux: pinmux@800 {
+					compatible = "ti,am437-padconf",
+						     "pinctrl-single";
+					reg = <0x800 0x31c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0xffffffff>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am43xx-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am4372-wkup-m3-ipc";
+					reg = <0x1324 0x44>;
+					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <64>;
+					dma-masters = <&edma>;
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		timer1_target: target-module@31000 {	/* 0x44e31000, ap 24 40.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x31000 0x4>,
+			      <0x31010 0x4>,
+			      <0x31014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x31000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@33000 {			/* 0x44e33000, ap 26 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x33000 0x1000>;
+		};
+
+		target-module@35000 {			/* 0x44e35000, ap 28 50.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x35000 0x4>,
+			      <0x35010 0x4>,
+			      <0x35014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x35000 0x1000>;
+
+			wdt: wdt@0 {
+				compatible = "ti,am4372-wdt","ti,omap3-wdt";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@37000 {			/* 0x44e37000, ap 30 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x37000 0x1000>;
+		};
+
+		target-module@39000 {			/* 0x44e39000, ap 32 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x39000 0x1000>;
+		};
+
+		rtc_target: target-module@3e000 {	/* 0x44e3e000, ap 34 60.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3e074 0x4>,
+			      <0x3e078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+			clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+					     "ti,da830-rtc";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_32768_ck>;
+				clock-names = "int-clk";
+				system-power-controller;
+				status = "disabled";
+			};
+		};
+
+		target-module@40000 {			/* 0x44e40000, ap 36 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x40000>;
+		};
+
+		target-module@86000 {			/* 0x44e86000, ap 40 70.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */
+			clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@88000 {			/* 0x44e88000, ap 38 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00088000 0x00008000>,
+				 <0x00008000 0x00090000 0x00001000>,
+				 <0x00009000 0x00091000 0x00001000>;
+		};
+	};
+};
+
+&l4_fast {					/* 0x4a000000 */
+	compatible = "ti,am4-l4-fast", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
+			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
+			 <0x00400000 0x00400000 0x002000>,	/* ap 5 */
+			 <0x00402000 0x00402000 0x001000>,	/* ap 6 */
+			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
+			 <0x00280000 0x00280000 0x001000>;	/* ap 8 */
+
+		target-module@100000 {			/* 0x4a100000, ap 3 04.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x101200 0x4>,
+			      <0x101208 0x4>,
+			      <0x101204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x8000>;
+
+			mac_sw: switch@0 {
+				compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+				clock-names = "fck", "50mclk";
+				assigned-clocks = <&dpll_clksel_mac_clk>;
+				assigned-clock-rates = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1 0>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2 0>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_gclk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&cpsw_cpts_rft_clk>;
+					clock-names = "cpts";
+				};
+			};
+		};
+
+		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x200000 0x80000>;
+		};
+
+		target-module@400000 {			/* 0x4a400000, ap 5 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x400000 0x2000>;
+		};
+	};
+};
+
+&l4_per {					/* 0x48000000 */
+	compatible = "ti,am4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
+		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
+		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
+			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 8 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 9 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 10 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 11 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 12 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 13 */
+			 <0x00038000 0x00038000 0x002000>,	/* ap 14 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 15 */
+			 <0x0003c000 0x0003c000 0x002000>,	/* ap 16 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 17 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 18 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 19 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 20 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 21 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 22 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 23 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 24 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 25 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 26 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 27 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 28 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 29 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 30 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 31 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 32 */
+			 <0x00090000 0x00090000 0x001000>,	/* ap 33 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 65 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 66 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 71 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 72 */
+			 <0x000c8000 0x000c8000 0x001000>,	/* ap 73 */
+			 <0x000c9000 0x000c9000 0x001000>,	/* ap 74 */
+			 <0x000ca000 0x000ca000 0x001000>,	/* ap 77 */
+			 <0x000cb000 0x000cb000 0x001000>,	/* ap 78 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 80 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 81 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 84 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 85 */
+			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48022000, ap 8 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x48024000, ap 10 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4802a000, ap 12 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x8>,
+			      <0x2a010 0x8>,
+			      <0x2a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30110 0x4>,
+			      <0x30114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+
+			spi0: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 80 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 84 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@38000 {			/* 0x48038000, ap 14 04.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 8 2>,
+				       <&edma 9 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4803c000, ap 16 2a.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x2000>,
+				 <0x46400000 0x46400000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46400000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 10 2>,
+				       <&edma 11 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		timer2_target: target-module@40000 {	/* 0x48040000, ap 18 1e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>,
+			      <0x40014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			timer2: timer@0  {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>,
+			      <0x42014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>,
+			      <0x44014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>,
+			      <0x46014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48000 0x4>,
+			      <0x48010 0x4>,
+			      <0x48014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4a000 0x4>,
+			      <0x4a010 0x4>,
+			      <0x4a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@4c000 {			/* 0x4804c000, ap 28 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>,
+			      <0x4c114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 30 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x602fc 0x4>,
+			      <0x60110 0x4>,
+			      <0x60114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				reg = <0x0 0x1000>;
+				ti,needs-special-reset;
+				dmas = <&edma 24 0>,
+					<&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@c8000 {			/* 0x480c8000, ap 73 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc8000 0x4>,
+			      <0xc8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <8>;
+				mbox_wkupm3: wkup_m3 {
+					ti,mbox-send-noirq;
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <0 0 3>;
+				};
+			};
+		};
+
+		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xca000 0x4>,
+			      <0xca010 0x4>,
+			      <0xca014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xca000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x48100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 34 */
+			 <0x0008d000 0x0018d000 0x001000>,	/* ap 35 */
+			 <0x0008e000 0x0018e000 0x001000>,	/* ap 36 */
+			 <0x0008f000 0x0018f000 0x001000>,	/* ap 37 */
+			 <0x0009c000 0x0019c000 0x001000>,	/* ap 38 */
+			 <0x0009d000 0x0019d000 0x001000>,	/* ap 39 */
+			 <0x000a6000 0x001a6000 0x001000>,	/* ap 40 */
+			 <0x000a7000 0x001a7000 0x001000>,	/* ap 41 */
+			 <0x000a8000 0x001a8000 0x001000>,	/* ap 42 */
+			 <0x000a9000 0x001a9000 0x001000>,	/* ap 43 */
+			 <0x000aa000 0x001aa000 0x001000>,	/* ap 44 */
+			 <0x000ab000 0x001ab000 0x001000>,	/* ap 45 */
+			 <0x000ac000 0x001ac000 0x001000>,	/* ap 46 */
+			 <0x000ad000 0x001ad000 0x001000>,	/* ap 47 */
+			 <0x000ae000 0x001ae000 0x001000>,	/* ap 48 */
+			 <0x000af000 0x001af000 0x001000>,	/* ap 49 */
+			 <0x000cc000 0x001cc000 0x002000>,	/* ap 50 */
+			 <0x000ce000 0x001ce000 0x002000>,	/* ap 51 */
+			 <0x000d0000 0x001d0000 0x002000>,	/* ap 52 */
+			 <0x000d2000 0x001d2000 0x002000>,	/* ap 53 */
+			 <0x000d8000 0x001d8000 0x001000>,	/* ap 54 */
+			 <0x000d9000 0x001d9000 0x001000>,	/* ap 55 */
+			 <0x000a0000 0x001a0000 0x001000>,	/* ap 67 */
+			 <0x000a1000 0x001a1000 0x001000>,	/* ap 68 */
+			 <0x000a2000 0x001a2000 0x001000>,	/* ap 69 */
+			 <0x000a3000 0x001a3000 0x001000>,	/* ap 70 */
+			 <0x000a4000 0x001a4000 0x001000>,	/* ap 92 */
+			 <0x000a5000 0x001a5000 0x001000>,	/* ap 93 */
+			 <0x000c1000 0x001c1000 0x001000>,	/* ap 94 */
+			 <0x000c2000 0x001c2000 0x001000>;	/* ap 95 */
+
+		target-module@8c000 {			/* 0x4818c000, ap 34 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8c000 0x1000>;
+		};
+
+		target-module@8e000 {			/* 0x4818e000, ap 36 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8e000 0x1000>;
+		};
+
+		target-module@9c000 {			/* 0x4819c000, ap 38 52.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9c000 0x8>,
+			      <0x9c010 0x8>,
+			      <0x9c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa0000 0x4>,
+			      <0xa0110 0x4>,
+			      <0xa0114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x1000>;
+
+			spi1: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa2000 0x4>,
+			      <0xa2110 0x4>,
+			      <0xa2114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+
+			spi2: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa4000 0x4>,
+			      <0xa4110 0x4>,
+			      <0xa4114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa4000 0x1000>;
+
+			spi3: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a6000 {			/* 0x481a6000, ap 40 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa6050 0x4>,
+			      <0xa6054 0x4>,
+			      <0xa6058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa6000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a8000 {			/* 0x481a8000, ap 42 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa8050 0x4>,
+			      <0xa8054 0x4>,
+			      <0xa8058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@aa000 {			/* 0x481aa000, ap 44 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xaa050 0x4>,
+			      <0xaa054 0x4>,
+			      <0xaa058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xaa000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,am4372-uart","ti,omap2-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ac000 {			/* 0x481ac000, ap 46 30.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xac000 0x4>,
+			      <0xac010 0x4>,
+			      <0xac114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xac000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ae000 {			/* 0x481ae000, ap 48 32.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xae000 0x4>,
+			      <0xae010 0x4>,
+			      <0xae114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xae000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0xc1000 0x4>,
+			      <0xc1010 0x4>,
+			      <0xc1014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x2000>;
+
+			dcan0: can@0 {
+				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 0>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd0000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 1>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d8000 {			/* 0x481d8000, ap 54 5e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xd82fc 0x4>,
+			      <0xd8110 0x4>,
+			      <0xd8114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd8000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				reg = <0x0 0x1000>;
+				ti,needs-special-reset;
+				dmas = <&edma 2 0>,
+					<&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@300000 {					/* 0x48300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 56 */
+			 <0x00001000 0x00301000 0x001000>,	/* ap 57 */
+			 <0x00002000 0x00302000 0x001000>,	/* ap 58 */
+			 <0x00003000 0x00303000 0x001000>,	/* ap 59 */
+			 <0x00004000 0x00304000 0x001000>,	/* ap 60 */
+			 <0x00005000 0x00305000 0x001000>,	/* ap 61 */
+			 <0x00018000 0x00318000 0x004000>,	/* ap 62 */
+			 <0x0001c000 0x0031c000 0x001000>,	/* ap 63 */
+			 <0x00010000 0x00310000 0x002000>,	/* ap 64 */
+			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+			 <0x00012000 0x00312000 0x001000>,	/* ap 79 */
+			 <0x00020000 0x00320000 0x001000>,	/* ap 82 */
+			 <0x00021000 0x00321000 0x001000>,	/* ap 83 */
+			 <0x00026000 0x00326000 0x001000>,	/* ap 86 */
+			 <0x00027000 0x00327000 0x001000>,	/* ap 87 */
+			 <0x0002a000 0x0032a000 0x000400>,	/* ap 88 */
+			 <0x0002c000 0x0032c000 0x001000>,	/* ap 89 */
+			 <0x00013000 0x00313000 0x001000>,	/* ap 90 */
+			 <0x00014000 0x00314000 0x001000>,	/* ap 91 */
+			 <0x00006000 0x00306000 0x001000>,	/* ap 96 */
+			 <0x00007000 0x00307000 0x001000>,	/* ap 97 */
+			 <0x00008000 0x00308000 0x001000>,	/* ap 98 */
+			 <0x00009000 0x00309000 0x001000>,	/* ap 99 */
+			 <0x0000a000 0x0030a000 0x001000>,	/* ap 100 */
+			 <0x0000b000 0x0030b000 0x001000>,	/* ap 101 */
+			 <0x0003d000 0x0033d000 0x001000>,	/* ap 102 */
+			 <0x0003e000 0x0033e000 0x001000>,	/* ap 103 */
+			 <0x0003f000 0x0033f000 0x001000>,	/* ap 104 */
+			 <0x00040000 0x00340000 0x001000>,	/* ap 105 */
+			 <0x00041000 0x00341000 0x001000>,	/* ap 106 */
+			 <0x00042000 0x00342000 0x001000>,	/* ap 107 */
+			 <0x00045000 0x00345000 0x001000>,	/* ap 108 */
+			 <0x00046000 0x00346000 0x001000>,	/* ap 109 */
+			 <0x00047000 0x00347000 0x001000>,	/* ap 110 */
+			 <0x00048000 0x00348000 0x001000>,	/* ap 111 */
+			 <0x000f2000 0x003f2000 0x002000>,	/* ap 112 */
+			 <0x000f4000 0x003f4000 0x001000>,	/* ap 113 */
+			 <0x0004c000 0x0034c000 0x002000>,	/* ap 114 */
+			 <0x0004e000 0x0034e000 0x001000>,	/* ap 115 */
+			 <0x00022000 0x00322000 0x001000>,	/* ap 116 */
+			 <0x00023000 0x00323000 0x001000>,	/* ap 117 */
+			 <0x000f0000 0x003f0000 0x001000>,	/* ap 118 */
+			 <0x0002a400 0x0032a400 0x000400>,	/* ap 119 */
+			 <0x0002a800 0x0032a800 0x000400>,	/* ap 120 */
+			 <0x0002ac00 0x0032ac00 0x000400>,	/* ap 121 */
+			 <0x0002b000 0x0032b000 0x001000>,	/* ap 122 */
+			 <0x00080000 0x00380000 0x020000>,	/* ap 123 */
+			 <0x000a0000 0x003a0000 0x001000>,	/* ap 124 */
+			 <0x000a8000 0x003a8000 0x008000>,	/* ap 125 */
+			 <0x000b0000 0x003b0000 0x001000>,	/* ap 126 */
+			 <0x000c0000 0x003c0000 0x020000>,	/* ap 127 */
+			 <0x000e0000 0x003e0000 0x001000>,	/* ap 128 */
+			 <0x000e8000 0x003e8000 0x008000>;	/* ap 129 */
+
+		target-module@0 {			/* 0x48300000, ap 56 40.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap0: ecap@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap1: ecap@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap2: ecap@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap",
+						     "ti,am33xx-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>,
+			      <0x6004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+
+			epwmss3: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm3: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			epwmss4: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm4: pwm@48308200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>,
+			      <0xa004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			epwmss5: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm5: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm",
+						     "ti,am33xx-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@10000 {			/* 0x48310000, ap 64 4e.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x11fe0 0x4>,
+			      <0x11fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@13000 {			/* 0x48313000, ap 90 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x13000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x48318000, ap 62 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x4000>;
+		};
+
+		target-module@20000 {			/* 0x48320000, ap 82 34.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>,
+			      <0x20114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22000 0x4>,
+			      <0x22010 0x4>,
+			      <0x22114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x26000 0x4>,
+			      <0x26104 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+
+			vpfe0: vpfe@0 {
+				compatible = "ti,am437x-vpfe";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28104 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+
+			vpfe1: vpfe@0 {
+				compatible = "ti,am437x-vpfe";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4832a000, ap 88 3c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x4>,
+			      <0x2a010 0x4>,
+			      <0x2a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, dss_clkdm */
+			clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x0002a000 0x00000400>,
+				 <0x00000400 0x0002a400 0x00000400>,
+				 <0x00000800 0x0002a800 0x00000400>,
+				 <0x00000c00 0x0002ac00 0x00000400>,
+				 <0x00001000 0x0002b000 0x00001000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap3-dss";
+				reg = <0 0x200>;
+				status = "disabled";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x00000000 0x00000000 0x00000400>,
+					 <0x00000400 0x00000400 0x00000400>,
+					 <0x00000800 0x00000800 0x00000400>,
+					 <0x00000c00 0x00000c00 0x00000400>,
+					 <0x00001000 0x00001000 0x00001000>;
+
+				target-module@400 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x400 0x4>,
+					      <0x410 0x4>,
+					      <0x414 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x400 0x400>;
+
+					dispc: dispc@0 {
+						compatible = "ti,omap3-dispc";
+						reg = <0 0x400>;
+						interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&disp_clk>;
+						clock-names = "fck";
+
+						max-memory-bandwidth = <230000000>;
+					};
+				};
+
+				target-module@800 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x800 0x4>,
+					      <0x810 0x4>,
+					      <0x814 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x800 0x400>;
+
+					rfbi: rfbi@0 {
+						compatible = "ti,omap3-rfbi";
+						reg = <0 0x100>;
+						clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+						clock-names = "fck";
+						status = "disabled";
+					};
+				};
+			};
+		};
+
+		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3d000 0x4>,
+			      <0x3d010 0x4>,
+			      <0x3d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3d000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3f000 0x4>,
+			      <0x3f010 0x4>,
+			      <0x3f014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3f000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x41000 0x4>,
+			      <0x41010 0x4>,
+			      <0x41014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x41000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x45000 0x4>,
+			      <0x45110 0x4>,
+			      <0x45114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x45000 0x1000>;
+
+			spi4: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@47000 {			/* 0x48347000, ap 110 70.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x47000 0x4>,
+			      <0x47014 0x4>,
+			      <0x47018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47000 0x1000>;
+
+			hdq: hdq@0 {
+				compatible = "ti,am4372-hdq";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&func_12m_clk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x2000>;
+		};
+
+		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x20000>;
+
+			dwc3_1: omap_dwc3@0 {
+				compatible = "ti,am437x-dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <1>;
+				ranges = <0 0 0x20000>;
+
+				usb1: usb@10000 {
+					compatible = "synopsys,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy1>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					status = "disabled";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa8000 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x8000>;
+
+			ocp2scp0: ocp2scp@0 {
+				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+
+				usb2_phy1: phy@8000 {
+					compatible = "ti,am437x-usb2";
+					reg = <0x0 0x8000>;
+					syscon-phy-power = <&scm_conf 0x620>;
+					clocks = <&usb_phy0_always_on_clk32k>,
+						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>;
+					clock-names = "wkupclk", "refclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@c0000 {			/* 0x483c0000, ap 127 7a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc0000 0x4>,
+			      <0xc0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x20000>;
+
+			dwc3_2: omap_dwc3@0 {
+				compatible = "ti,am437x-dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <1>;
+				ranges = <0 0 0x20000>;
+
+				usb2: usb@10000 {
+					compatible = "synopsys,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy2>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					status = "disabled";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xe8000 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe8000 0x8000>;
+
+			ocp2scp1: ocp2scp@0 {
+				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+
+				usb2_phy2: phy@8000 {
+					compatible = "ti,am437x-usb2";
+					reg = <0x0 0x8000>;
+					syscon-phy-power = <&scm_conf 0x628>;
+					clocks = <&usb_phy1_always_on_clk32k>,
+						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names = "wkupclk", "refclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@f2000 {			/* 0x483f2000, ap 112 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf2000 0x2000>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 000000000..8ea3780f9
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CM-T43 on SB-SOM-T43";
+	compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+};
+
+&am43xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+		>;
+	};
+
+	dss_pinctrl_default: dss_pinctrl_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
+			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: i2c2_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	usb2_phy1_default: usb2_phy1_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	usb2_phy2_default: usb2_phy2_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom_base: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vsb_3v3>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pinctrl_default>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 28 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
new file mode 100644
index 000000000..496ed34f7
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM437x SK EVM";
+	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-SK-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad0 {
+		compatible = "gpio-matrix-keypad";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_pins>;
+
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <5>;
+
+		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
+				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
+
+		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
+				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
+
+		linux,keymap = <
+				MATRIX_KEY(0, 0, KEY_DOWN)
+				MATRIX_KEY(0, 1, KEY_RIGHT)
+				MATRIX_KEY(1, 0, KEY_LEFT)
+				MATRIX_KEY(1, 1, KEY_UP)
+			>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led0 {
+			label = "am437x-sk:red:heartbeat";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "am437x-sk:green:mmc1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "am437x-sk:blue:cpu0";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "am437x-sk:blue:usr3";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+		compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		backlight = <&lcd_bl>;
+
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		/*
+		 * WL_EN is not SDIO standard compliant. It is an out of band
+		 * signal and hard to be dealt with in a standard way by the
+		 * SDIO core driver.
+		 * So modelling the WL_EN line as a regulator was a natural
+		 * choice as the MMC core already deals with MMC supplies.
+		 */
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	matrix_keypad_pins: matrix_keypad_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+		>;
+	};
+
+	leds_pins: leds_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+		>;
+	};
+
+	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+
+			/* Slave 2 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value */
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+
+		>;
+	};
+
+	qspi_pins: qspi_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+		>;
+	};
+
+	usb1_pins: usb1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	usb2_pins: usb2_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
+			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
+			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
+		>;
+	};
+
+	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */
+			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
+		>;
+	};
+
+	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */
+			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */
+			AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_ctsn.uart1_ctsn */
+			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rtsn.uart1_rtsn */
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			/* VDD_CORE limits min of OPP50 and max of OPP100 */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdds_ddr";
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
+		};
+
+		dcdc4: regulator-dcdc4 {
+			regulator-name = "v3_3d";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-name = "v1_8d";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		power-button {
+			compatible = "ti,tps65218-pwrbutton";
+			status = "okay";
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
+	edt-ft5306@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+
+		wakeup-source;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&dcdc4>;
+		IOVDD-supply = <&dcdc4>;
+		DRVDD-supply = <&dcdc4>;
+		DVDD-supply = <&ldo1>;
+	};
+
+	lis331dlh@18 {
+		compatible = "st,lis331dlh";
+		reg = <0x18>;
+		status = "okay";
+
+		Vdd-supply = <&dcdc4>;
+		Vdd_IO-supply = <&dcdc4>;
+		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&dcdc4>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_bt_pins_default>;
+	pinctrl-1 = <&uart1_bt_pins_sleep>;
+};
+
+&mmc3 {
+	status = "okay";
+	/*
+	 * these are on the crossbar and are outlined in the
+	 * xbar-event-map element
+	 */
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wlan_pins_default>;
+		pinctrl-1 = <&wlan_pins_sleep>;
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
+
+	status = "okay";
+
+	op-mode = <0>;
+	tdm-slots = <2>;
+	serial-dir = <
+		0 0 1 2
+	>;
+
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe0_ep: endpoint {
+			remote-endpoint = <&ov2659_1>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
new file mode 100644
index 000000000..d2aebdbc7
--- /dev/null
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -0,0 +1,1020 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+/ {
+	model = "TI AM43x EPOS EVM";
+	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	matrix_keypad: matrix_keypad0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&matrix_keypad_default>;
+		pinctrl-1 = <&matrix_keypad_sleep>;
+		wakeup-source;
+
+		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+			     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+			     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+		col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+			     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+			     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+			     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+		linux,keymap = <0x00000201	/* P1 */
+			0x01000204	/* P4 */
+			0x02000207	/* P7 */
+			0x0300020a	/* NUMERIC_STAR */
+			0x00010202	/* P2 */
+			0x01010205	/* P5 */
+			0x02010208	/* P8 */
+			0x03010200	/* P0 */
+			0x00020203	/* P3 */
+			0x01020206	/* P6 */
+			0x02020209	/* P9 */
+			0x0302020b	/* NUMERIC_POUND */
+			0x00030067	/* UP */
+			0x0103006a	/* RIGHT */
+			0x0203006c	/* DOWN */
+			0x03030069>;	/* LEFT */
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&am43xx_pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&unused_pins>;
+
+		unused_pins: unused_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		nand_flash_x8_default: nand_flash_x8_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		nand_flash_x8_sleep: nand_flash_x8_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		ecap0_pins_default: backlight_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		ecap0_pins_sleep: backlight_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		i2c2_pins: pinmux_i2c2_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins_default: pinmux_spi0_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi0_pins_sleep: pinmux_spi0_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		spi1_pins_default: pinmux_spi1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+			>;
+		};
+
+		spi1_pins_sleep: pinmux_spi1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		mmc1_pins_default: pinmux_mmc1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			>;
+		};
+
+		mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
+			>;
+		};
+
+		matrix_keypad_default: matrix_keypad_default {
+			pinctrl-single,pins = <
+				 AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7)          /* mii1_tx_clk.gpio3_9 */
+				 AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7)          /* mii1_rx_clk.gpio3_10 */
+				 AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd3.gpio2_18 */
+				 AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd2.gpio2_19 */
+				 AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_ctsn.gpio0_12 */
+				 AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rtsn.gpio0_13 */
+				 AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rxd.gpio0_14 */
+				 AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_txd.gpio0_15 */
+			>;
+		};
+
+		matrix_keypad_sleep: matrix_keypad_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		qspi1_pins_default: qspi1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		qspi1_pins_sleep: qspi1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		pixcir_ts_pins_default: pixcir_ts_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		hdq_pins: pinmux_hdq_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+			>;
+		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		display_mux_pins: display_mux_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
+
+		uart0_pins_default: uart0_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		uart0_pins_sleep: uart0_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy1_default: usb2_phy1_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy1_sleep: usb2_phy1_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		usb2_phy2_default: usb2_phy2_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy2_sleep: usb2_phy2_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	phys = <&phy_gmii_sel 1 1>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdcdc3";
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
+		};
+
+		dcdc4: regulator-dcdc4 {
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pixcir_ts_pins_default>;
+		pinctrl-1 = <&pixcir_ts_pins_sleep>;
+
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
+	status = "okay";
+
+	p1 {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&nand_flash_x8_default>;
+	pinctrl-1 = <&nand_flash_x8_sleep>;
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
+		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,we-on-ns = <0>;   /* cs-on-ns */
+		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
+		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+		gpmc,access-ns = <30>; /* tCEA + 4*/
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000C0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002C0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&rtc_target {
+	status = "disabled";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+		status = "okay";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ecap0_pins_default>;
+		pinctrl-1 = <&ecap0_pins_sleep>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi0_pins_default>;
+	pinctrl-1 = <&spi0_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+};
+
+&usb2_phy1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usb2_phy1_default>;
+	pinctrl-1 = <&usb2_phy1_sleep>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usb2_phy2_default>;
+	pinctrl-1 = <&usb2_phy2_sleep>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi1_pins_default>;
+	pinctrl-1 = <&qspi1_pins_sleep>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&hdq {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			remote-endpoint = <&ov2659_1>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart0_pins_default>;
+	pinctrl-1 = <&uart0_pins_sleep>;
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mux_synctimer32k_ck {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
new file mode 100644
index 000000000..c726cd8db
--- /dev/null
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -0,0 +1,883 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&scm_clocks {
+	sys_clkin_ck: sys_clkin_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck@2d20 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@2d60 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@2da0 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck@2e20 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck@2de0 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick@2a38 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck@4200 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck@4204 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck@4208 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck@420c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck@4210 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck@4214 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck@4218 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck@422c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5_ck>;
+		reg = <0x4234>;
+		ti,bit-shift = <2>;
+		ti,dividers = <2>, <5>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck@423c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk@4244 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+		ti,set-rate-parent;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck@2e60 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	timer8_fck: timer8_fck@421c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck@4220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck@4224 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck@4228 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div@4250 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
+};
+
+&prcm {
+	wkup_cm: wkup-cm@2800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x2800 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x2800 0x400>;
+
+		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
+			compatible = "ti,clkctrl";
+			reg = <0x120 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
+			compatible = "ti,clkctrl";
+			reg = <0x228 0xc>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
+			compatible = "ti,clkctrl";
+			reg = <0x220 0x4>, <0x328 0x44>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	mpu_cm: mpu-cm@8300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x8300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8300 0x100>;
+
+		mpu_clkctrl: mpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gfx_l3_cm: gfx-l3-cm@8400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x8400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8400 0x100>;
+
+		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_rtc_cm: l4-rtc-cm@8500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x8500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8500 0x100>;
+
+		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	per_cm: per-cm@8800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x8800 0xc00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8800 0xc00>;
+
+		l3_clkctrl: l3-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x3c>, <0x78 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: l3s-clkctrl@68 {
+			compatible = "ti,clkctrl";
+			reg = <0x68 0xc>, <0x220 0x4c>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
+			compatible = "ti,clkctrl";
+			reg = <0x320 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4ls_clkctrl: l4ls-clkctrl@420 {
+			compatible = "ti,clkctrl";
+			reg = <0x420 0x1a4>;
+			#clock-cells = <2>;
+		};
+
+		emif_clkctrl: emif-clkctrl@720 {
+			compatible = "ti,clkctrl";
+			reg = <0x720 0x4>;
+			#clock-cells = <2>;
+		};
+
+		dss_clkctrl: dss-clkctrl@a20 {
+			compatible = "ti,clkctrl";
+			reg = <0xa20 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
+			compatible = "ti,clkctrl";
+			reg = <0xb20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
new file mode 100644
index 000000000..032c1acfc
--- /dev/null
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+	pruss1_tm: target-module@4b226000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b226000 0x4>,
+		      <0x4b226004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b200000 0x80000>;
+	};
+
+	pruss2_tm: target-module@4b2a6000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b2a6000 0x4>,
+		      <0x4b2a6004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b280000 0x80000>;
+	};
+};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
new file mode 100644
index 000000000..6d7530a48
--- /dev/null
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra72x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5718", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5718
+ *
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
new file mode 100644
index 000000000..e81078c2d
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5718.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include "am57xx-idk-common.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
new file mode 100644
index 000000000..5e0bdf16d
--- /dev/null
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5728", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5728
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
new file mode 100644
index 000000000..149cfafb9
--- /dev/null
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+	model = "BeagleBoard.org BeagleBone AI";
+	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+		     "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi_conn;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+	};
+
+	vdd_adc: gpioregulator-vdd_adc {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_adc";
+		vin-supply = <&vdd_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0
+			3300000 1>;
+	};
+
+	vdd_5v: fixedregulator-vdd_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&vdd_ddr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_encoder_out>;
+			};
+		};
+	};
+
+	hdmi_enc: encoder@0 {
+		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+		 *  no need for individual driver
+		 */
+		compatible = "ti,tpd12s015";
+		gpios = <0>,
+			<0>,
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			port@0 {
+				reg = <0x0>;
+
+				hdmi_encoder_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <0x1>;
+
+				hdmi_encoder_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+	};
+
+	brcmf_pwrseq: brcmf_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
+				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		ti,enable-id-detection;
+		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vdd_5v>;
+			smps3-in-supply = <&vdd_5v>;
+			smps45-in-supply = <&vdd_5v>;
+			smps6-in-supply = <&vdd_5v>;
+			smps7-in-supply = <&vdd_5v>;
+			mps3-in-supply = <&vdd_5v>;
+			smps8-in-supply = <&vdd_5v>;
+			smps9-in-supply = <&vdd_5v>;
+			ldo1-in-supply = <&vdd_5v>;
+			ldo2-in-supply = <&vdd_5v>;
+			ldo3-in-supply = <&vdd_5v>;
+			ldo4-in-supply = <&vdd_5v>;
+			ldo9-in-supply = <&vdd_5v>;
+			ldoln-in-supply = <&vdd_5v>;
+			ldousb-in-supply = <&vdd_5v>;
+			ldortc-in-supply = <&vdd_5v>;
+
+			regulators {
+				vdd_mpu: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_ddr: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_dspeve: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_core: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;	/*** 1.15V */
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_iva: smps8 {
+					/* VDD_IVAHD */				/*** 1.06V */
+					regulator-name = "smps8";
+				};
+
+				vdd_3v3: smps9 {
+					/* VDD_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_sd: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_1v8: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo3: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo4: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				vdd_rtc: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = < 840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_pll: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		st,mod-12b = <1>; /* 12-bit ADC */
+		st,ref-sel = <0>; /* internal ADC reference */
+		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
+			adc0: iio-device@0 {
+				#io-channel-cells = <1>;
+				iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
+				iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
+					"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
+			};
+		};
+
+		stmpe_touchscreen {
+			status = "disabled";
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+		};
+
+		stmpe_pwm {
+			compatible = "st,stmpe-pwm";
+			#pwm-cells = <2>;
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&vdd_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;
+
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&ocp {
+	pruss1_shmem: pruss_shmem@4b200000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b200000 0x020000>;
+	};
+
+	pruss2_shmem: pruss_shmem@4b280000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b280000 0x020000>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_sd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vdd_1v8>;
+	vqmmc-supply = <&vdd_1v8>;
+	bus-width = <8>;
+	ti,non-removable;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	ti,needs-special-reset;
+	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+	dma-names = "tx", "rx";
+
+};
+
+&mmc4 {
+	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+	/* HS: High speed up to 50 MHz (3.3 V signaling). */
+	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+	status = "okay";
+
+	ti,needs-special-reset;
+	vmmc-supply = <&vdd_3v3>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	ti,non-removable;
+	non-removable;
+	no-1-8-v;
+	max-frequency = <24000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmc-pwrseq = <&brcmf_pwrseq>;
+
+	brcmf: wifi@1 {
+		status = "okay";
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		brcm,sd-head-align = <4>;
+		brcm,sd_head_align = <4>;
+		brcm,sd_sgentry_align = <512>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_encoder_in>;
+		};
+	};
+};
+
+&bandgap {
+	status = "okay";
+};
+
+&cpu_alert0 {
+	temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+	status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpu0_opp_table {
+	opp_slow-500000000 {
+		opp-shared;
+	};
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
new file mode 100644
index 000000000..1d66278c3
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
new file mode 100644
index 000000000..6504265f3
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5728 IDK";
+	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
new file mode 100644
index 000000000..2cb577432
--- /dev/null
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra76x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5748
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
new file mode 100644
index 000000000..37758761c
--- /dev/null
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "am5748.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5748 IDK";
+	compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+};
+
+&m_can0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 000000000..6b82ecf80
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7_target {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 000000000..83e174e05
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000..656dd8446
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
new file mode 100644
index 000000000..0a8b16505
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	/* NOTE: This describes the "original" pre-production A2 revision */
+	model = "TI AM5728 BeagleBoard-X15";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+
+	vmmc-supply = <&ldo1_reg>;
+	no-1-8-v;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
+};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 000000000..d783d1f69
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am5728.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x";
+	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led0 {
+			label = "cl-som-am57x:green";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ads7846reg: fixedregulator-ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+					"Headphone", "Headphone Jack",
+					"Microphone", "Microphone Jack",
+					"Line", "Line Jack";
+		simple-audio-card,routing =
+					"Headphone Jack", "RHPOUT",
+					"Headphone Jack", "LHPOUT",
+					"LLINEIN", "Line Jack",
+					"MICIN", "Mic Bias",
+					"Mic Bias", "Microphone Jack";
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	leds_pins_default: leds_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+		>;
+	};
+
+	i2c3_pins_default: i2c3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+		>;
+	};
+
+	i2c4_pins_default: i2c4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
+			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
+		>;
+	};
+
+	tps659038_pins_default: tps659038_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave at addr 0x0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+			/* Slave at addr 0x1 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps659038_pins_default>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVA */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* PMIC_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* regen1 not used */
+			};
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	rtc0: rtc@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+
+	eeprom_module: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: wm8731@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		status = "okay";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		status = "okay";
+	};
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+
+	spi_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80", "jedec,spi-nor";
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <48000000>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x0>;
+		};
+	};
+
+	/* touch controller */
+	touchscreen@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <1>;                              /* CS1 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&gpio3_target {
+	ti,no-reset-on-init;
+};
+
+&gpio2_target {
+	status = "okay";
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
new file mode 100644
index 000000000..3eed6e09c
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <80000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <90000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
new file mode 100644
index 000000000..9fcb8944a
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-industrial-grade.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "VMAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v1_2d: fixedregulator-v1_2d {
+		compatible = "regulator-fixed";
+		regulator-name = "V1_2D";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&v3_3d>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+		gpios = <0>, /* optional CT_CP_HPD */
+			<0>, /* optional LS_OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	src_clk_x1: src_clk_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x418>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vmain>;
+			smps3-in-supply = <&vmain>;
+			smps45-in-supply = <&vmain>;
+			smps6-in-supply = <&vmain>;
+			smps7-in-supply = <&vmain>;
+			smps8-in-supply = <&vmain>;
+			smps9-in-supply = <&vmain>;
+			ldo1-in-supply = <&vmain>;
+			ldo2-in-supply = <&vmain>;
+			ldo3-in-supply = <&vmain>;
+			ldo4-in-supply = <&vmain>;
+			ldo9-in-supply = <&vmain>;
+			ldoln-in-supply = <&vmain>;
+			ldousb-in-supply = <&vmain>;
+			ldortc-in-supply = <&vmain>;
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					/* VDD_IVA + VDD_DSP on AM571 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* 5728 - VDD_IVAHD */
+					/* 5718 - N.C. test point */
+					regulator-name = "smps8";
+				};
+
+				smps9_reg: smps9 {
+					/* VDD_3_3D */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					/* NOTE: on rev 1.3a, data supply */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
+	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	dsi_bridge: tc358778@e {
+		compatible = "toshiba,tc358778", "toshiba,tc358768";
+		reg = <0xe>;
+		status = "disabled";
+
+		clocks = <&src_clk_x1>;
+		clock-names = "refclk";
+
+		vddc-supply = <&v1_2d>;
+		vddmipi-supply = <&v1_2d>;
+		vddio-supply = <&v3_3d>;
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				rgb_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+					data-lines = <24>;
+				};
+			};
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+	status = "okay";
+	ext-clk-src;
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	extcon = <&extcon_usb2>;
+	dr_mode = "otg";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&v3_3d>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <96000000>;
+	no-1-8-v;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				remote-endpoint = <&rgb_in>;
+				data-lines = <24>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
new file mode 100644
index 000000000..422f953fc
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <105000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 000000000..beef63e8a
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+	compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi;
+	};
+};
+
+&dra7_pmx_core {
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdcd.gpio6_27 */
+			DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdwp.gpio6_28 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
+		>;
+	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
+		>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&lcd0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins_default>;
+
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 0 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+&hdmi_conn {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_conn_pins>;
+
+	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&hdmi_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
new file mode 100644
index 000000000..7da718abb
--- /dev/null
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Somfy Animeo IP";
+	compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &usart1;
+		serial1 = &usart2;
+		serial2 = &usart0;
+		serial3 = &dbgu;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		stdout-path = &usart2;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 = <&pinctrl_usart2>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk
+					     &pinctrl_mmc0_slot1_cmd_dat0
+					     &pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						barebox@0 {
+							label = "barebox";
+							reg = <0x0 0x58000>;
+						};
+
+						u_boot_env@58000 {
+							label = "u_boot_env";
+							reg = <0x58000 0x8000>;
+						};
+
+						ubi@60000 {
+							label = "ubi";
+							reg = <0x60000 0x1FA0000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_green {
+			label = "power_green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		power_red {
+			label = "power_red";
+			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_green {
+			label = "tx_green";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		tx_red {
+			label = "tx_red";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keyswitch_in {
+			label = "keyswitch_in";
+			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+
+		error_in {
+			label = "error_in";
+			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <29>;
+			wakeup-source;
+		};
+
+		btn {
+			label = "btn";
+			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
+			linux,code = <31>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 000000000..e18769df9
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 000000000..26b1c69e9
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
new file mode 100644
index 000000000..e68527b0d
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
new file mode 100644
index 000000000..aac1edd4b
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 000000000..42efac749
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
new file mode 100644
index 000000000..967684b36
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
new file mode 100644
index 000000000..f533c8b49
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 000000000..a79e1d1d3
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
new file mode 100644
index 000000000..26783d053
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu@0 {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts
new file mode 100644
index 000000000..15431077f
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
new file mode 100644
index 000000000..a534a8e44
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -0,0 +1,468 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-eb";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x4e000000 0x10000>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		port1-otg;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		charlcd: fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		wdog: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
new file mode 100644
index 000000000..f925782f8
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -0,0 +1,592 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB1176";
+	compatible = "arm,realview-pb1176";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb1176_serial0;
+		serial1 = &pb1176_serial1;
+		serial2 = &pb1176_serial2;
+		serial3 = &pb1176_serial3;
+		serial4 = &fpga_serial;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		port1-otg;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		/* Primary DevChip GIC synthesized with the CPU */
+		intc_dc1176: interrupt-controller@10120000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10121000 0x1000>,
+			      <0x10120000 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x10110000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s).
+			 */
+			arm,override-auxreg;
+			cache-size = <131072>; // 128kB
+			cache-sets = <512>;
+			cache-line-size = <32>;
+		};
+
+		pmu {
+			compatible = "arm,arm1176-pmu";
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer01: timer@10104000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10104000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10105000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10105000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		pb1176_rtc: rtc@10108000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10108000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_gpio0: gpio@1010a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x1010a000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_ssp: spi@1010b000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1010b000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		pb1176_serial0: serial@1010c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010c000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial1: serial@1010d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010d000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial2: serial@1010e000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010e000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial3: serial@1010f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010f000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
+
+		clcd@10112000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10112000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupt-names = "combined";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA rather than the DevChip */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+					<0 2 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fpga_kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_serial: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* This GIC on the board is cascaded off the DevChip GIC */
+		intc_fpga1176: interrupt-controller@10040000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fpga_gpio0: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_gpio1: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 000000000..0c7dabef4
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,718 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: cache-controller {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: osc5@d4 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: osc6@d8 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			port1-otg;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts
new file mode 100644
index 000000000..d3238c252
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pba8.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	model = "ARM RealView Platform Baseboard for Cortex-A8";
+	compatible = "arm,realview-pba8";
+	arm,hbi = <0x178>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1e000000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000000 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+	compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
new file mode 100644
index 000000000..85d3968fb
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	/*
+	 * This is the RealView Platform Baseboard Explore for Cortex-A9
+	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+	 */
+	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+	arm,hbi = <0x182>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x1f002000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s).
+		 */
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		arm,parity-disable;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
+	};
+
+	scu: scu@1f000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	twd_timer: timer@1f000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	twd_wdog: watchdog@1f000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1f000000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
new file mode 100644
index 000000000..ac95667ed
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-pbx";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x4e000000 0x10000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		port1-otg;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "arm,realview-pbx-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon0: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon0 0>,
+					  <&sp810_syscon0 1>,
+					  <&sp810_syscon0 2>,
+					  <&sp810_syscon0 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		wdog0: watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		wdog1: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&sp810_syscon0 0>,
+			         <&sp810_syscon0 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&sp810_syscon0 2>,
+			         <&sp810_syscon0 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk4", "timerclk5", "apb_pclk";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk6", "timerclk7", "apb_pclk";
+		};
+
+		sp810_syscon1: sysctl@1001a000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x1001a000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk4",
+					     "timerclk5",
+					     "timerclk6",
+					     "timerclk7";
+			assigned-clocks = <&sp810_syscon1 0>,
+					  <&sp810_syscon1 1>,
+					  <&sp810_syscon1 2>,
+					  <&sp810_syscon1 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+	};
+
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the NEC ISSP */
+	issp {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
new file mode 100644
index 000000000..77261a2fb
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ *  Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Evaluation Board";
+	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 370 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1L", "In Jack";
+		status = "okay";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
new file mode 100644
index 000000000..2008c6eaa
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "D-Link DNS-327L";
+	compatible = "dlink,dns327l",
+		"marvell,armada370",
+		"marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <
+			&backup_button_pin
+			&power_button_pin
+			&reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <
+			&sata_l_amber_pin
+			&sata_r_amber_pin
+			&backup_led_pin
+			/* Ensure these are managed by hardware */
+			&sata_l_white_pin
+			&sata_r_white_pin>;
+
+		pinctrl-names = "default";
+
+		sata-r-amber-pin {
+			label = "dns327l:amber:sata-r";
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		sata-l-amber-pin {
+			label = "dns327l:amber:sata-l";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		backup-led-pin {
+			label = "dns327l:white:usb";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-0 = <&xhci_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "USB3.0 Port Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_r_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-0 = <&sata_r_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-R Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_l_power: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-0 = <&sata_l_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-L Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	sata_l_white_pin: sata-l-white-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+
+	sata_r_white_pin: sata-r-white-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "sata1";
+	};
+
+	sata_r_amber_pin: sata-r-amber-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	sata_l_amber_pin: sata-l-amber-pin {
+		marvell,pins = "mpp53";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp61";
+		marvell,function = "gpo";
+	};
+
+	xhci_pwr_pin: xhci-pwr-pin {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	sata_r_pwr_pin: sata-r-pwr-pin {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	sata_l_pwr_pin: sata-l-pwr-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp60", "mpp61";
+		marvell,function = "uart1";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+};
+
+/* Serial console */
+&uart0 {
+	status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
+				   <0x2 0x18 0x0 0x5747>;
+	};
+};
+
+&eth1 {
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "marvell,mv64xxx-i2c";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				/* 1.0 MiB */
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				/* 128 KiB */
+				reg = <0x100000 0x20000>;
+				read-only;
+			};
+
+			partition@120000 {
+				label = "uImage";
+				/* 7 MiB */
+				reg = <0x120000 0x700000>;
+			};
+
+			partition@820000 {
+				label = "ubifs";
+				/* ~ 84 MiB */
+				reg = <0x820000 0x54e0000>;
+			};
+
+			/* Hardcoded into stock bootloader */
+			partition@5d00000 {
+				label = "failsafe-uImage";
+				/* 5 MiB */
+				reg = <0x5d00000 0x500000>;
+			};
+
+			partition@6200000 {
+				label = "failsafe-fs";
+				/* 29 MiB */
+				reg = <0x6200000 0x1d00000>;
+			};
+
+			partition@7f00000 {
+				label = "bbt";
+				/* 1 MiB for BBT */
+				reg = <0x7f00000 0x100000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
new file mode 100644
index 000000000..7c2f5a79b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
+
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			crypto@90000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	pwr_led_pin: pwr-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	stat_led_pins: stat-led-pins {
+		marvell,pins = "mpp64", "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Linux";
+				reg = <0x400000 0x400000>;
+			};
+			partition@800000 {
+				label = "Filesystem";
+				reg = <0x800000 0x3f800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
new file mode 100644
index 000000000..b0b640b7d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* eSATA interface */
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn102:blue:sata1";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-sata2-led {
+			label = "rn102:blue:sata2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-backup-led {
+			label = "rn102:blue:backup";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	poweroff: poweroff {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
new file mode 100644
index 000000000..85e2e9e27
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				pca9554: pca9554@23 {
+					compatible = "nxp,pca9554";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x23>;
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue-backup-led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue-power-led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn104:blue:sata1";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata2-led {
+			label = "rn104:blue:sata2";
+			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata3-led {
+			label = "rn104:blue:sata3";
+			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata4-led {
+			label = "rn104:blue:sata4";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+				<&gpio1 26 GPIO_ACTIVE_HIGH>,
+				<&gpio1 27 GPIO_ACTIVE_HIGH>,
+				<&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
+		pinctrl-names = "default";
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
new file mode 100644
index 000000000..c910d157a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Reference Design";
+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					   speed = <1000>;
+					   full-duplex;
+				};
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				button {
+					label = "Software Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			gpio-fan {
+				compatible = "gpio-fan";
+				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+				gpio-fan,speed-map = <0 0 3000 1>;
+				pinctrl-0 = <&fan_pins>;
+				pinctrl-names = "default";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				sw_led {
+					label = "370rd:green:sw";
+					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	switch: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+
+&pinctrl {
+	fan_pins: fan-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	led_pins: led-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 000000000..8dd242e66
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  950 2
+			 1400 1
+			 1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000..3cf70c72c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulators {
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA2 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA3 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  800 2
+			  1050 1
+			  1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 000000000..b52634ecf
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+		};
+
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		backup {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x300000>;
+			};
+			partition@300000 {
+				label = "device-tree";
+				reg = <0x300000 0x20000>;
+			};
+			partition@320000 {
+				label = "linux";
+				reg = <0x320000 0x2000000>;
+			};
+			partition@2320000 {
+				label = "rootfs";
+				reg = <0x2320000 0xdce0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000..5ee572dc9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
new file mode 100644
index 000000000..578b54b39
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud
+ * Code name (board/PCB)        : Cumulus
+ * Model name (case sticker)    : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 000000000..a624b2371
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		};
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
new file mode 100644
index 000000000..64f2ce254
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Synology DS213j";
+	compatible = "synology,ds213j", "marvell,armada370",
+		     "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+
+		internal-regs {
+
+			/* RTC provided by Seiko S-35390A I2C RTC chip below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Main device RTC chip */
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a TI MSP430F2111 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* rear USB port, near reset button */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* rear USB port, near RJ45 port */
+			usb@51000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+			       status = "okay";
+			       phy = <&phy1>;
+			       phy-mode = "sgmii";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-fan-32-38 {
+		status = "okay";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+			     &fan_ctrl_high_pin &fan_alarm_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+			 &gpio2  0 GPIO_ACTIVE_HIGH
+			 &gpio2  1 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       1000 1
+				       1150 2
+				       1350 4
+				       1500 3
+				       1650 5
+				       1750 6
+				       1900 7 >;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&disk1_led_pin
+			     &disk2_led_pin>;
+		pinctrl-names = "default";
+
+		disk1-led-amber {
+			label = "synology:amber:disk1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		disk2-led-amber {
+			label = "synology:amber:disk2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	disk1_led_pin: disk1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	disk2_led_pin: disk2-led-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp37";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit3_pin: syno-id-bit3-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_low_pin: fan-ctrl-low-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_high_pin: fan-ctrl-high-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	fan_alarm_pin: fan-alarm-pin {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
new file mode 100644
index 000000000..0b8c2a64b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 370 and XP SoC";
+	compatible = "marvell,armada-370-xp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "marvell,sheeva-v7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&mpic>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			rtc: rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <41>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <42>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pin-ctrl@18000 {
+				reg = <0x18000 0x38>;
+			};
+
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherencyfab: coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
+			timer: timer@20300 {
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+			};
+
+			watchdog: watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			usb0: usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			usb1: usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			eth0: ethernet@70000 {
+				reg = <0x70000 0x4000>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			eth1: ethernet@74000 {
+				reg = <0x74000 0x4000>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <113>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdio: mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+ };
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
new file mode 100644
index 000000000..c042c416a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 370 family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 370 family SoC";
+	compatible = "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-outer-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-370-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
+
+			sscg: sscg@18330 {
+				reg = <0x18330 0x4>;
+			};
+
+			cpuconf: cpu-config@21000 {
+				compatible = "marvell,armada-370-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			audio_controller: audio-controller@30000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada370-audio";
+				reg = <0x30000 0x4000>;
+				interrupts = <93>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-370-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>;
+				clocks = <&gateclk 23>;
+				clock-names = "cesa0";
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x7e0>;
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+			reg-names = "sram";
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+			/*
+			 * The Armada 370 has an erratum preventing the use of
+			 * the standard workflow for CPU idle support (relying
+			 * on the BootROM code to enter/exit idle state).
+			 * Reserve some amount of the crypto SRAM to put the
+			 * cpuidle workaround.
+			 */
+			idle-sram@0 {
+				reg = <0x0 0x20>;
+			};
+		};
+	};
+};
+
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+	reg = <0x11100 0x20>;
+};
+
+&mpic {
+	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-370-timer";
+	clocks = <&coreclk 2>;
+};
+
+&watchdog {
+	compatible = "marvell,armada-370-wdt";
+	clocks = <&coreclk 2>;
+};
+
+&usb0 {
+	clocks = <&coreclk 0>;
+};
+
+&usb1 {
+	clocks = <&coreclk 0>;
+};
+
+&eth0 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&eth1 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6710-pinctrl";
+
+	spi0_pins1: spi0-pins1 {
+		marvell,pins = "mpp33", "mpp34",
+			       "mpp35", "mpp36";
+		marvell,function = "spi0";
+	};
+
+	spi0_pins2: spi0_pins2 {
+		marvell,pins = "mpp32", "mpp63",
+			       "mpp64", "mpp65";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp49", "mpp50",
+			       "mpp51", "mpp52";
+		marvell,function = "spi1";
+	};
+
+	uart0_pins: uart0-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "uart0";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp41", "mpp42";
+		marvell,function = "uart1";
+	};
+
+	sdio_pins1: sdio-pins1 {
+		marvell,pins = "mpp9",  "mpp11", "mpp12",
+				"mpp13", "mpp14", "mpp15";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins2: sdio-pins2 {
+		marvell,pins = "mpp47", "mpp48", "mpp49",
+				"mpp50", "mpp51", "mpp52";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins3: sdio-pins3 {
+		marvell,pins = "mpp48", "mpp49", "mpp50",
+				"mpp51", "mpp52", "mpp53";
+		marvell,function = "sd0";
+	};
+
+	i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c0";
+	};
+
+	i2s_pins1: i2s-pins1 {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10",
+			       "mpp12", "mpp13";
+		marvell,function = "audio";
+	};
+
+	i2s_pins2: i2s-pins2 {
+		marvell,pins = "mpp49", "mpp47", "mpp50",
+			       "mpp59", "mpp57", "mpp61",
+			       "mpp62", "mpp60", "mpp58";
+		marvell,function = "audio";
+	};
+
+	mdio_pins: mdio-pins {
+		marvell,pins = "mpp17", "mpp18";
+		marvell,function = "ge";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+			       "mpp9", "mpp10", "mpp11", "mpp12",
+			       "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25", "mpp26",
+			       "mpp27", "mpp28", "mpp29", "mpp30";
+		marvell,function = "ge1";
+	};
+};
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
new file mode 100644
index 000000000..0e679465c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+	};
+};
+&pciec {
+	status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
+
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
new file mode 100644
index 000000000..d117fc4ae
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu: scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer0: timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			mdio: mdio@c0054 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0xc0054 0x4>;
+				clocks = <&gateclk 19>;
+			};
+
+			/* Network controller */
+			ethernet: ethernet@f0000 {
+				compatible = "marvell,armada-375-pp2";
+				reg = <0xf0000 0xa000>, /* Packet Processor regs */
+				      <0xc0000 0x3060>, /* LMS regs */
+				      <0xc4000 0x100>,  /* eth0 regs */
+				      <0xc5000 0x100>;  /* eth1 regs */
+				clocks = <&gateclk 3>, <&gateclk 19>;
+				clock-names = "pp_clk", "gop_clk";
+				status = "disabled";
+
+				eth0: eth0 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					status = "disabled";
+				};
+
+				eth1: eth1 {
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					status = "disabled";
+				};
+			};
+
+			rtc: rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			usbcluster: usb-cluster@18400 {
+				compatible = "marvell,armada-375-usb-cluster";
+				reg = <0x18400 0x4>;
+				#phy-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer1: timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog: watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherencyfab: coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb0: usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				phys = <&usbcluster PHY_TYPE_USB2>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			usb1: usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb2: usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				phys = <&usbcluster PHY_TYPE_USB3>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			sdio: mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal: thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
new file mode 100644
index 000000000..7146cc8f0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000..c9ac630e5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000..fa653b379
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 000000000..624bbcae6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button_1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000..7881df3b2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x40000000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
new file mode 100644
index 000000000..0e4613bb5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				xhci0_vbus_pins: xhci0-vbus-pins {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+			};
+
+			/* CON3 */
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
+			};
+
+			/* CON2 */
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON4 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+				usb-phy = <&usb3_phy>;
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_xhci0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_xhci0_vbus: xhci0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-name = "xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00800000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00800000 0x00400000>;
+				read-only;
+			};
+
+			partition@c00000 {
+				label = "Root";
+				reg = <0x00c00000 0x3f400000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
new file mode 100644
index 000000000..a03050c97
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1200AC";
+	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "caiman:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "caiman:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "caiman:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "caiman:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "caiman:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "caiman:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "caiman:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "caiman:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "caiman:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "caiman:white:power";
+	};
+
+	sata {
+		label = "caiman:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
new file mode 100644
index 000000000..e3e4877a6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACv2";
+	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "cobra:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "cobra:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "cobra:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "cobra:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "cobra:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "cobra:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "cobra:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "cobra:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "cobra:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "cobra:white:power";
+	};
+
+	sata {
+		label = "cobra:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
new file mode 100644
index 000000000..3c4af57ec
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT3200ACM";
+	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "rango:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "rango:white:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "rango:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "rango:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "rango:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "rango:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "rango:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "rango:white:power";
+	};
+
+	sata {
+		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		label = "rango:white:sata";
+	};
+
+	wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_2g";
+	};
+
+	wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u_env";
+			reg = <0x200000 0x20000>;    /* 128KiB */
+		};
+
+		partition@220000 {
+			label = "s_env";
+			reg = <0x220000 0x40000>;    /* 256KiB */
+		};
+
+		partition@7e0000 {
+			label = "devinfo";
+			reg = <0x7e0000 0x40000>;   /* 256KiB */
+			read-only;
+		};
+
+		partition@820000 {
+			label = "sysdiag";
+			reg = <0x820000 0x1e0000>;   /* 1920KiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x5000000>;  /* 80MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x4a00000>;  /* 74MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@5a00000 {
+			label = "kernel2";
+			reg = <0x5a00000 0x5000000>; /* 80MiB */
+		};
+
+		partition@6000000 {
+			label = "rootfs2";
+			reg = <0x6000000 0x4a00000>; /* 74MiB */
+		};
+
+		/*
+		 * 86MiB, last MiB is for the BBT, not writable
+		 */
+		partition@aa00000 {
+			label = "syscfg";
+			reg = <0xaa00000 0x5600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+		};
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 000000000..3451cd3e5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "shelby:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "shelby:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "shelby:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "shelby:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "shelby:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "shelby:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "shelby:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "shelby:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "shelby:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	power {
+		label = "shelby:white:power";
+	};
+
+	sata {
+		label = "shelby:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
new file mode 100644
index 000000000..827e82be2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Linksys boards based on Armada 385";
+	compatible = "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+	};
+
+	usb3_1_phy: usb3_1-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_vbus: usb3_1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_1_vbus_pins>;
+		regulator-name = "usb3_1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_pins>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_pins>;
+		pinctrl-names = "default";
+
+		power {
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		sata {
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	expander0: pca9635@68 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9635";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	/* 128MiB or 256MiB */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand: nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Marvell 88W8864, 5GHz-only */
+	status = "okay";
+};
+
+&pcie2 {
+	/* Marvell 88W8864, 2GHz-only */
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_keys_pins: gpio-keys-pins {
+		/* mpp24: wps, mpp29: reset */
+		marvell,pins = "mpp24", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	gpio_leds_pins: gpio-leds-pins {
+		/* mpp54: sata, mpp55: power */
+		marvell,pins = "mpp54", "mpp55";
+		marvell,function = "gpio";
+	};
+
+	usb3_1_vbus_pins: usb3_1-vbus-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&uart0 {
+	/* J10: VCC, NC, RX, NC, TX, GND  */
+	status = "okay";
+};
+
+&usb0 {
+	/* USB part of the eSATA/USB 2.0 port */
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+	usb-phy = <&usb3_1_phy>;
+};
+
+&rtc {
+	/* No crystal connected to the internal RTC */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
new file mode 100644
index 000000000..d8769956c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Synology DS116";
+	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				/* A PIC16F1829 is connected to uart1 at 9600 bps,
+				 * and takes single-character orders :
+				 *   "1" : power off // already handled by the poweroff node
+				 *   "2" : short beep
+				 *   "3" : long beep
+				 *   "4" : turn the power LED ON
+				 *   "5" : flash the power LED
+				 *   "6" : turn the power LED OFF
+				 *   "7" : turn the status LED OFF
+				 *   "8" : turn the status LED ON
+				 *   "9" : flash the status LED
+				 *   "A" : flash the motherboard LED (D8)
+				 *   "B" : turn the motherboard LED OFF
+				 *   "C" : hard reset
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				status = "okay";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				usb-phy = <&usb3_0_phy>;
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				usb-phy = <&usb3_1_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 16 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <   0 0
+					      1500 1
+					      2500 2
+					      3000 3
+					      3400 4
+					      3700 5
+					      3900 6
+					      4000 7>;
+			#cooling-cells = <2>;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			/* The green part is on gpio0.20 which is also used by
+			 * sata0, and accesses to SATA disk 0 make it blink so it
+			 * doesn't need to be declared here.
+			 */
+			orange {
+				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+				label = "ds116:orange:disk";
+				default-state = "off";
+			};
+		};
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_0_vbus: usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_1_vbus: usb3-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci1_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		/* Note: there is a redboot partition table despite u-boot
+		 * being used. The names presented here are the same as those
+		 * found in the FIS directory. There is also a small device
+		 * tree in the last 64kB of the RedBoot partition which is not
+		 * enumerated. The MAC address and the serial number are listed
+		 * in the "vendor" partition.
+		 */
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x000f0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "zImage";
+			reg = <0x000f0000 0x002d0000>;
+		};
+
+		partition@390000 {
+			label = "rd.gz";
+			reg = <0x003c0000 0x00410000>;
+		};
+
+		partition@7d0000 {
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&pinctrl {
+	/* use only one pin for UART1, as mpp20 is used by sata0 */
+	uart1_pins: uart-pins-1 {
+		marvell,pins = "mpp19";
+		marvell,function = "ua1";
+	};
+
+	xhci0_vbus_pins: xhci0_vbus_pins {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+	xhci1_vbus_pins: xhci1_vbus_pins {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
new file mode 100644
index 000000000..320c759b4
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		status = "okay";
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+			/* leds device (in STM32F0) at address 0x2b */
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A at address 0x64 */
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: phy@1 {
+		status = "okay";
+		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E6176 at address 0x10 */
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dsa,member = <0 0>;
+
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ports@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ports@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ports@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ports@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ports@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ports@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs2_pins: spi0cs2-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	spi-nor@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
new file mode 100644
index 000000000..f081f7cb6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		pciec: pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
new file mode 100644
index 000000000..53b4bd355
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog Base A1";
+	compatible = "solidrun,clearfog-base-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	phy = <&phy1>;
+};
+
+&gpio0 {
+	phy1_reset {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "phy1-reset";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
+	phy1: ethernet-phy@1 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	/* phy1 reset */
+	clearfog_phy_pins: clearfog-phy-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
new file mode 100644
index 000000000..ff890c09c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include "armada-388-clearfog.dts"
+
+/ {
+	model = "SolidRun Clearfog Pro A1";
+	compatible = "solidrun,clearfog-pro-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 000000000..20f8d4667
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	soc {
+		internal-regs {
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&expander0 {
+	/*
+	 * PCA9655 GPIO expander:
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	pcie2_0_clkreq {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie2.0-clkreq";
+	};
+	pcie2_0_w_disable {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie2.0-w-disable";
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "ref";
+	};
+	clearfog_dsa0_pins: clearfog-dsa0-pins {
+		marvell,pins = "mpp23", "mpp41";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
new file mode 100644
index 000000000..a0aa1d188
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&microsom_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc-supply = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 2>;
+	phy-mode = "sgmii";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&i2c0 {
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-
+	 *  3-CON3 W_DISABLE
+	 *  4-
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655", "nxp,pca9555";
+		 * but you can't do this because of the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1_0_clkreq {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1_0_w_disable {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		usb3_ilimit {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3_power {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2_devslp {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1: PIC microcontroller (Pro models)
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* mikrobus uart */
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
new file mode 100644
index 000000000..a2bec07bf
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
new file mode 100644
index 000000000..9d873257a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				expander0: pca9555@20 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x20>;
+				};
+
+				expander1: pca9555@21 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x21>;
+				};
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON16
+				 * through an FTDI
+				 */
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/* GE1 CON15 */
+			ethernet@30000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			/* CON4 */
+			usb@58000 {
+				vcc-supply = <&reg_usb2_0_vbus>;
+				status = "okay";
+			};
+
+			/* GE0 CON1 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+				/*
+				 * The Reference Clock 0 is used to provide a
+				 * clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata1>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata2>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata3>;
+				};
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				no-1-8-v;
+				/*
+				 * A388-GP board v1.5 and higher replace
+				 * hitherto card detection method based on GPIO
+				 * with the one using DAT3 pin. As they are
+				 * incompatible, software-based polling is
+				 * enabled with 'broken-cd' property. For boards
+				 * older than v1.5 it can be replaced with:
+				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+				 * whereas for the newer ones following can be
+				 * used instead:
+				 * 'dat3-cd;'
+				 * 'cd-inverted;'
+				 */
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			/* CON5 */
+			usb3@f0000 {
+				usb-phy = <&usb2_1_phy>;
+				status = "okay";
+			};
+
+			/* CON7 */
+			usb3@f8000 {
+				usb-phy = <&usb3_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * The two other PCIe units are accessible
+			 * through mini PCIe slot on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <	 0 0
+					      3000 1>;
+		};
+	};
+
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_0_vbus: v5-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_sata1: pwr-sata1 {
+		regulator-name = "pwr_en_sata1";
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata1: v5-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_12v_sata1: v12-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_sata2: pwr-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata2";
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata2: v5-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_12v_sata2: v12-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_sata3: pwr-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata3";
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata3: v5-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata3>;
+	};
+
+	reg_12v_sata3: v12-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata3";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata3>;
+	};
+};
+
+&pinctrl {
+	pca0_pins: pca0_pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
new file mode 100644
index 000000000..a7ff774d7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board_rev_bit_0 {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board_rev_bit_1 {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3_ilimit {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
new file mode 100644
index 000000000..328a4d6af
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				broken-cd;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
new file mode 100644
index 000000000..f3a020ff5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+	soc {
+		internal-regs {
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000..363ac4238
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&mdio {
+	/*
+	 * Add the phy clock here, so the phy can be accessed to read its
+	 * IDs prior to binding with the driver.
+	 */
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+	pinctrl-names = "default";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	microsom_phy_clk_pins: microsom-phy-clk-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "ref";
+	};
+	/* Optional eMMC */
+	microsom_sdhci_pins: microsom-sdhci-pins {
+		marvell,pins = "mpp21", "mpp28", "mpp37",
+			       "mpp38", "mpp39", "mpp40";
+		marvell,function = "sd0";
+	};
+};
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
new file mode 100644
index 000000000..df3c8d1d8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs3: devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0xc200 0x20>;
+				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-38x-uart", "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "marvell,armada-38x-uart", "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
+				nand_rb: nand-rb {
+					marvell,pins = "mpp41";
+					marvell,function = "nand";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			comphy: phy@18300 {
+				compatible = "marvell,armada-380-comphy";
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog: watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherencyfab: coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu: pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb0: usb@58000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor0: xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			mdio: mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			rtc: rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ahci0: sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			ahci1: sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal: thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
+				status = "okay";
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci: sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3_0: usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3_1: usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
new file mode 100644
index 000000000..0e29474ae
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
new file mode 100644
index 000000000..aa2057d4d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 390 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6920-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
new file mode 100644
index 000000000..6dd9e9077
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00600000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00600000 0x00400000>;
+				read-only;
+			};
+
+			partition@1000000 {
+				label = "Root";
+				reg = <0x00a00000 0x3f600000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
new file mode 100644
index 000000000..e18a7d9cd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
new file mode 100644
index 000000000..fc28308e5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 Development Board
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-398.dtsi"
+
+/ {
+	model = "Marvell Armada 398 Development Board";
+	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
new file mode 100644
index 000000000..c5ac89399
--- /dev/null
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 398 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-395.dtsi"
+
+/ {
+	compatible = "marvell,armada398", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6928-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
new file mode 100644
index 000000000..9525e7b7f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 39x family of SoCs.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell Armada 39x family SoC";
+	compatible = "marvell,armada390";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-390-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
+	soc {
+		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x100>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@11200 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11200 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@11300 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11300 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl@18000 {
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				uart0_pins: uart0-pins {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart1-pins {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				spi1_pins: spi1-pins {
+					marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+					marvell,function = "spi1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33",
+						       "mpp38", "mpp28", "mpp40", "mpp42",
+						       "mpp35", "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-390-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-390-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-390-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20a00 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&coreclk 5>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-390-pmsu",
+					     "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-390-corediv-clock",
+					     "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 1 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000..aeccedd12
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell 98DX3236 SoC";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,98dx3236-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		/*
+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			corediv-clock@18740 {
+				status = "disabled";
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			xor1: xor@f0800 {
+				compatible = "marvell,orion-xor";
+				reg = <0xf0800 0x100
+				       0xf0a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			nand_controller: nand-controller@d0000 {
+				clocks = <&dfx_coredivclk 0>;
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
+			dfx_coredivclk: corediv-clock@f8268 {
+				compatible = "marvell,mv98dx3236-corediv-clock";
+				reg = <0xf8268 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		switch: switch@a8000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+			pp0: packet-processor@0 {
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+				reg = <0 0x4000000>;
+				interrupts = <33>, <34>, <35>;
+				dfx = <&dfx>;
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	compatible = "marvell,98dx3236-pinctrl";
+
+	nand_pins: nand-pins {
+		marvell,pins = "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25",
+			       "mpp26", "mpp27", "mpp28",
+			       "mpp29", "mpp30";
+		marvell,function = "dev";
+	};
+
+	nand_rb: nand-rb {
+		marvell,pins = "mpp19";
+		marvell,function = "nand";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp0", "mpp1",
+			       "mpp2", "mpp3";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	status = "disabled";
+};
+
+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000..1d9d8a8ea
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX3336 SoC";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000..48ffdc72b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX4251 SoC";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&sdio {
+	status = "okay";
+};
+
+&pinctrl {
+	compatible = "marvell,98dx4251-pinctrl";
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10";
+		marvell,function = "sd0";
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
+	interrupts = <33>, <34>, <35>, <36>;
+};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
new file mode 100644
index 000000000..606fd3476
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			/* UART0 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* UART1 */
+			serial@12100 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&phy_int_pin>;
+	pinctrl-names = "default";
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	phy_int_pin: phy-int-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
new file mode 100644
index 000000000..8a3aa616b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+	model = "Marvell Bobcat2 Evaluation Board";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	/* No CD or WP GPIOs */
+	broken-cd;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 000000000..4ec0ae01b
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+	model = "DB-XC3-24G4XG";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
new file mode 100644
index 000000000..5d04dc68c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Evaluation Board";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			usb@52000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
+					};
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
new file mode 100644
index 000000000..b4cca507c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 000000000..87dcb502f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Lenovo Iomega ix4-300d";
+	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				adt7473@2e {
+					compatible = "adi,adt7473";
+					reg = <0x2e>;
+				};
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+			};
+
+			nand-controller@d0000 {
+				status = "okay";
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin
+			&select_button_pin &scroll_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		select-button {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		scroll-button {
+			label = "Scroll Button";
+			linux,code = <KEY_SCROLLDOWN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		status = "okay";
+		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&hdd_led_pin>;
+		pinctrl-names = "default";
+
+		hdd-led {
+			label = "ix4-300d:hdd:blue";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power-led {
+			label = "ix4-300d:power:white";
+			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+			/* init blinking while booting */
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		sysfail-led {
+			label = "ix4-300d:sysfail:red";
+			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys-led {
+			label = "ix4-300d:sys:blue";
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		hddfail-led {
+			label = "ix4-300d:hddfail:red";
+			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	/*
+	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
+	 * them up does the tweak) for poweroff to shutdown otherwise it
+	 * reboots
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	poweroff_pin: poweroff-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+	select_button_pin: select-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	scroll_button_pin: scroll-button-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	hdd_led_pin: hdd-led-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
new file mode 100644
index 000000000..8480a1691
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900AC (Mamba).
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on armada-xp-axpwifiap.dts:
+ *
+ *     Copyright (C) 2013 Marvell
+ *
+ *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Linksys WRT1900AC";
+	compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+
+			/* J10: VCC, NC, RX, NC, TX, GND  */
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			/* USB part of the eSATA/USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				tlc59116@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#gpio-cells = <2>;
+					compatible = "ti,tlc59116";
+					reg = <0x68>;
+
+					wan_amber@0 {
+						label = "mamba:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "mamba:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "mamba:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "mamba:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					esata@4 {
+						label = "mamba:white:esata";
+						reg = <0x4>;
+						linux,default-trigger = "disk-activity";
+					};
+
+					usb2@5 {
+						label = "mamba:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "mamba:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "mamba:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "mamba:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "mamba:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin>;
+		pinctrl-names = "default";
+
+		power {
+			label = "mamba:white:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	pwm_fan {
+		/* SUNON HA4010V4-0000-C99 */
+
+		compatible = "pwm-fan";
+		pwms = <&gpio0 24 4000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp32", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	gpio_fan_pin: gpio-fan-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;  /* 1MB */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u_env";
+				reg = <0x100000 0x40000>;    /* 256KB */
+			};
+
+			partition@140000 {
+				label = "s_env";
+				reg = <0x140000 0x40000>;    /* 256KB */
+			};
+
+			partition@900000 {
+				label = "devinfo";
+				reg = <0x900000 0x100000>;   /* 1MB */
+				read-only;
+			};
+
+			/* kernel1 overlaps with rootfs1 by design */
+			partition@a00000 {
+				label = "kernel1";
+				reg = <0xa00000 0x2800000>;  /* 40MB */
+			};
+
+			partition@d00000 {
+				label = "rootfs1";
+				reg = <0xd00000 0x2500000>;  /* 37MB */
+			};
+
+			/* kernel2 overlaps with rootfs2 by design */
+			partition@3200000 {
+				label = "kernel2";
+				reg = <0x3200000 0x2800000>; /* 40MB */
+			};
+
+			partition@3500000 {
+				label = "rootfs2";
+				reg = <0x3500000 0x2500000>; /* 37MB */
+			};
+
+			/*
+			 * 38MB, last MB is for the BBT, not writable
+			 */
+			partition@5a00000 {
+				label = "syscfg";
+				reg = <0x5a00000 0x2600000>;
+			};
+
+			/*
+			 * Unused area between "s_env" and "devinfo".
+			 * Moved here because otherwise the renumbered
+			 * partitions would break the bootloader
+			 * supplied bootargs
+			 */
+			partition@180000 {
+				label = "unused_area";
+				reg = <0x180000 0x780000>;   /* 7.5MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
new file mode 100644
index 000000000..1395cea12
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000..d55fe162f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000..fdcc81819
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000..230a3fd36
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
new file mode 100644
index 000000000..8ea73587d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata3_led_pin: sata3-led-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata4_led_pin: sata4-led-pin {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	sata1_power_pin: sata1-power-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	sata2_power_pin: sata2-power-pin {
+		marvell,pins = "mpp25";
+		marvell,function = "gpio";
+	};
+
+	sata3_power_pin: sata3-power-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	sata4_power_pin: sata4-power-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	err_led_pin: err-led-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
new file mode 100644
index 000000000..0efcc166d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		internal-regs {
+			rtc@10300 {
+				/* No crystal connected to the internal RTC */
+				status = "disabled";
+			};
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+
+			gpio_keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				init {
+					label = "Init Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			/* Front side USB 0 */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Front side USB 1 */
+			usb@51000 {
+				status = "okay";
+			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&pinctrl {
+	led_pins: led-pins-0 {
+		marvell,pins = "mpp49", "mpp51", "mpp53";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
new file mode 100644
index 000000000..809e821d7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+			     &sata3_pwr_pin &sata4_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata3_regulator: sata3-regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA3 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <6000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata4_regulator: sata4-regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA4 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <8000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
new file mode 100644
index 000000000..6c19984d6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * Contains definitions specific to the Armada XP SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <43>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <44>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal: thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			eth2: ethernet@30000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x30000 0x4000>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb2: usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
+			xor1: xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	ge0_gmii_pins: ge0-gmii-pins {
+		marvell,pins =
+		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
+		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
+		     "mpp8",  "mpp9",  "mpp10", "mpp11",
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge0";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins =
+		     "mpp0", "mpp1", "mpp2", "mpp3",
+		     "mpp4", "mpp5", "mpp6", "mpp7",
+		     "mpp8", "mpp9", "mpp10", "mpp11";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins =
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge1";
+	};
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp30", "mpp31", "mpp32",
+			       "mpp33", "mpp34", "mpp35";
+		marvell,function = "sd0";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp36", "mpp37",
+			       "mpp38", "mpp39";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
new file mode 100644
index 000000000..26f5443d8
--- /dev/null
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	nvic: interrupt-controller@e000e100  {
+		compatible = "arm,armv7m-nvic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe000e100 0xc00>;
+	};
+
+	systick: timer@e000e010 {
+		compatible = "arm,armv7m-systick";
+		reg = <0xe000e010 0x10>;
+		status = "disabled";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&nvic>;
+		ranges;
+	};
+};
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 000000000..d20d95359
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,69 @@
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 000000000..037157e6c
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,388 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/dma/nbpfaxi.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon: syscon@f8000000 {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	eth_phy_ref_clk: eth_phy_ref_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	clkctrl: clkctrl@f8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
+		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
+	};
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/*
+	 * Both pci nodes cannot be enabled at the same time,
+	 * leave the unwanted node as disabled.
+	 */
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pcie_ep: pcie_ep@f8050000 {
+		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8051000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x20000000>;
+		reg-names = "dbi", "dbi2", "phy", "addr_space";
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		num-lanes = <2>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl@f801d000 {
+		compatible = "axis,artpec6-pinctrl";
+		reg = <0xf801d000 0x400>;
+
+		pinctrl_uart0: uart0grp {
+			function = "uart0";
+			groups = "uart0grp2";
+			bias-pull-up;
+		};
+		pinctrl_uart1: uart1grp {
+			function = "uart1";
+			groups = "uart1grp0";
+			bias-pull-up;
+		};
+		pinctrl_uart2: uart2grp {
+			function = "uart2";
+			groups = "uart2grp1";
+			bias-pull-up;
+		};
+		pinctrl_uart3: uart3grp {
+			function = "uart3";
+			groups = "uart3grp0";
+			bias-pull-up;
+		};
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		dma-ranges;
+
+		crypto@f4264000 {
+			compatible = "axis,artpec6-crypto";
+			reg = <0xf4264000 0x4000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma0: dma@f8019000 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+		dma1: dma@f8019400 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019400 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "stmmaceth", "ptp_ref";
+			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
+				<&clkctrl ARTPEC6_CLK_PTP_REF>;
+			compatible = "snps,dwmac-4.10a", "snps,dwmac";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+			reg = <0xf8010000 0x4000>;
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+			snps,aal;
+			snps,tso;
+
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <1>;
+				snps,rd_osr_lmt = <15>;
+				/* If FB is disabled, the AXI master chooses
+				 * a burst length of any value less than the
+				 * maximum enabled burst length
+				 * (all lesser burst length enables are redundant).
+				 */
+				snps,blen = <0 0 0 0 16 0 0>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <2>;
+				queue0 {};
+				queue1 {};
+			};
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
new file mode 100644
index 000000000..7a874debb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000..892814c02
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <52000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0xe0000>; // 896KB
+				label = "u-boot";
+			};
+
+			u-boot-env@e0000 {
+				reg = <0xe0000 0x20000>; // 128KB
+				label = "u-boot-env";
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x900000>; // 9MB
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				reg = <0xa00000 0x2000000>; // 32MB
+				label = "rofs";
+			};
+
+			rwfs@6000000 {
+				reg = <0x2a00000 0x1600000>; // 22MB
+				label = "rwfs";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000..60ba86f3e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	kcs_addr = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	kcs_addr = <0x62>;
+};
+
+&kcs4 {
+	status = "okay";
+	kcs_addr = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
new file mode 100644
index 000000000..c2ece0b91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Qualcomm Centriq 2400  REP AST2520";
+	compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+                        <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		uid_led {
+			label = "UID_LED";
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		ras_error_led {
+			label = "RAS_ERROR_LED";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault {
+			label = "System_fault";
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1d {
+		compatible = "ti,tmp421";
+		reg = <0x1d>;
+	};
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			tmp421@1d {
+				compatible = "tmp421";
+				reg = <0x1d>;
+			};
+			adm1278@12 {
+				compatible = "adi,adm1278";
+				reg = <0x12>;
+				Rsense = <500>;
+			};
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			ds1100@58 {
+				compatible = "ds1100";
+				reg = <0x58>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_c7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000..2c29ac037
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_c7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000..2fb8b147f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 000000000..c34741dbd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 59.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3b80000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (4MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3c00000 0x400000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000..e6ad821a8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-switch@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 000000000..322587b7b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "fmc0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 000000000..8c426ba2f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default
+		     &pinctrl_ndts4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000..ad1fcad36
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi-gpio {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 123.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x7b80000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (4MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x7c00000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000..5e6105874
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000..8864e9c31
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	//MEZZ_FRU
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000..5a4e137fe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@B8000000 {
+			no-map;
+			reg = <0xB8000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(S, 0)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(S, 1)>;
+		};
+
+		ps2-presence {
+			label = "ps2-presence";
+			gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(S, 2)>;
+		};
+
+		ps3-presence {
+			label = "ps3-presence";
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(S, 3)>;
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+				"","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin_mclr_vpp {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
+		output-high;
+		line-name = "mclr_vpp";
+	};
+
+	i2c3_mux_oe_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@40 {
+		compatible = "ti,tca9554";
+		reg = <0x40>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		smbus0 {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "smbus0";
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c64";
+		reg = <0x53>;
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 000000000..62a3ab4c1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,872 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 000000000..80c92e065
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlyprintk";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 000000000..6e9baf3bb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "S2600WF BMC";
+	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 000000000..c29e5f4d8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin_gpio_h3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin_gpio_s4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin_gpio_y0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin_gpio_y1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin_gpio_z0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_z7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin_gpio_aa5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 000000000..084c455ad
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR855XG2 BMC";
+	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_riser1;
+		i2c15 = &i2c_riser2;
+		i2c16 = &i2c_riser3;
+		i2c17 = &i2c_M2;
+		i2c18 = &channel_0;
+		i2c19 = &channel_1;
+		i2c20 = &channel_2;
+		i2c21 = &channel_3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+		<&adc 12>,<&adc 13>,<&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc{
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_M2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <90000>;
+	HotSwap@10 {
+		compatible = "adm1272";
+		reg = <0x10>;
+	};
+
+	VR@45 {
+		compatible = "pmbus";
+		reg = <0x45>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/* temp1 */
+	tmp75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	/* temp2 */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+	fan@16 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_EMMC_RST_N";
+	};
+
+	pin_gpio_a3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "PCH_PWROK_BMC_FPGA";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "CPU_SM_WP";
+	};
+
+	pin_gpio_e0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PDB_PSU_SEL";
+	};
+
+	pin_gpio_e2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LOCATOR_LED_N";
+	};
+
+	pin_gpio_e5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R1_N";
+	};
+
+	pin_gpio_e6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU2_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_f2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RM_THROTTLE_EN_N";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_PMBUS_ALERT_B_EN";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FORCE_NM_THROTTLE_N";
+	};
+
+	pin_gpio_f6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_PCIE_I2C_MUX_RST_N";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R2_N";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_WP_N";
+	};
+
+	pin_gpio_j1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_USB_SEL";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_SMB_RST_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_HOLD_N";
+	};
+
+	pin_gpio_l0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_FAN_TACH_SEL";
+	};
+
+	pin_gpio_l1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_RESET_BMC_FPGA_N";
+	};
+
+	pin_gpio_l4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G1_EN";
+	};
+
+	pin_gpio_l5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G2_EN";
+	};
+
+	pin_gpio_r6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU3_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_r7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU4_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_s1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "DBP_SYSPWROK_BMC";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCH_RST_RSMRST_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HW_STRAP_5";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FW_PSU_ALERT_EN_N";
+	};
+
+	pin_gpio_aa4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "DBP_CPU_PREQ_N";
+	};
+
+	pin_gpio_ab3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_WDTRST";
+	};
+
+	pin_gpio_ac6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ESPI_BMC_ALERT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 000000000..73319917c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 000000000..42b37a204
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Lanyang BMC";
+	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System_boot_status";
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention_locator";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		plt_fault {
+			label = "Platform_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_fault {
+			label = "Onboard_drive_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+		};
+		bmc_err {
+			lable = "BMC_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_err {
+			lable = "Sys_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	tmp75@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_b0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HDD1_PWR_EN";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_USB1_OCI2";
+	};
+
+	pin_gpio_h5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_PERST_ENABLE_R";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_PCA9546_U177_N";
+	};
+
+	pin_gpio_aa6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_RESET_N";
+	};
+
+	pin_gpio_aa7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_RESET_N";
+	};
+
+	pin_gpio_ab0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_USB_PWRON_N";
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
new file mode 100644
index 000000000..cb85168f6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -0,0 +1,1347 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mihawk BMC";
+	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c215 = &bus6_mux215;
+		i2c216 = &bus6_mux216;
+		i2c217 = &bus6_mux217;
+		i2c218 = &bus6_mux218;
+		i2c219 = &bus6_mux219;
+		i2c220 = &bus6_mux220;
+		i2c221 = &bus6_mux221;
+		i2c222 = &bus6_mux222;
+		i2c223 = &bus7_mux223;
+		i2c224 = &bus7_mux224;
+		i2c225 = &bus7_mux225;
+		i2c226 = &bus7_mux226;
+		i2c227 = &bus7_mux227;
+		i2c228 = &bus7_mux228;
+		i2c229 = &bus7_mux229;
+		i2c230 = &bus7_mux230;
+		i2c231 = &bus9_mux231;
+		i2c232 = &bus9_mux232;
+		i2c233 = &bus9_mux233;
+		i2c234 = &bus9_mux234;
+		i2c235 = &bus9_mux235;
+		i2c236 = &bus9_mux236;
+		i2c237 = &bus9_mux237;
+		i2c238 = &bus9_mux238;
+		i2c239 = &bus10_mux239;
+		i2c240 = &bus10_mux240;
+		i2c241 = &bus10_mux241;
+		i2c242 = &bus10_mux242;
+		i2c243 = &bus10_mux243;
+		i2c244 = &bus10_mux244;
+		i2c245 = &bus10_mux245;
+		i2c246 = &bus10_mux246;
+		i2c247 = &bus12_mux247;
+		i2c248 = &bus12_mux248;
+		i2c249 = &bus12_mux249;
+		i2c250 = &bus12_mux250;
+		i2c251 = &bus13_mux251;
+		i2c252 = &bus13_mux252;
+		i2c253 = &bus13_mux253;
+		i2c254 = &bus13_mux254;
+		i2c255 = &bus13_mux255;
+		i2c256 = &bus13_mux256;
+		i2c257 = &bus13_mux257;
+		i2c258 = &bus13_mux258;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+
+		fan5 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd0 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vdd1 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 4>;
+	};
+
+	iio-hwmon-vcs0 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vcs1 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 6>;
+	};
+
+	iio-hwmon-vdn0 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vdn1 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 8>;
+	};
+
+	iio-hwmon-vio0 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vio1 {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 10>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+
+	iio-hwmon-vddrc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 14>;
+	};
+
+	iio-hwmon-vddrd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* SAMTEC P0 */
+	/* SAMTEC P1 */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    CLK Buffer 9DBL0651BKILFT
+	 *    CLK Buffer 9DBL0651BKILFT
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	power-supply@58 {
+		compatible = "ibm,cffps1";
+		reg = <0x58>;
+	};
+
+	power-supply@5b {
+		compatible = "ibm,cffps1";
+		reg = <0x5b>;
+	};
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN : IR35221 */
+	/* CP0 VIO : IR38064 */
+	/* CP0 VDDR : PXM1330 */
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN : IR35221 */
+	/* CP0 VIO : IR38064 */
+	/* CP0 VDDR : PXM1330 */
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* pca9548 -> NVMe1 to 8 */
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		bus7_mux223: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus7_mux224: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus7_mux225: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus7_mux226: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus7_mux227: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus7_mux228: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus7_mux229: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus7_mux230: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* pca9548 -> NVMe9 to 16 */
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		bus6_mux215: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus6_mux216: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus6_mux217: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus6_mux218: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus6_mux219: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus6_mux220: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus6_mux221: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus6_mux222: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* pca9545 Riser ->
+	*	PCIe x8  Slot3
+	*	PCIe x16 slot4
+	*	PCIe x8  slot5
+	*	I2C BMC RISER PCA9554
+	*	BMC SCL/SDA PCA9554
+	*	PCA9554
+	*/
+
+	/* pca9545 ->
+	*	PCIe x16 Slot1
+	*	PCIe x8  slot2
+	*	PEX8748
+	*/
+
+	pca9545riser@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c-mux-idle-disconnect;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		bus9_mux231: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus0 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus0";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux232: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus1 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus1";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux233: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux234: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	pca9545@71 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c-mux-idle-disconnect;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		bus9_mux235: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus2 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus2";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux236: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus3 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus3";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux237: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux238: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	/* pca9545 Riser ->
+	* 	PCIe x8  Slot8
+	* 	PCIe x16 slot9
+	* 	PCIe x8  slot10
+	* 	I2C BMC RISER PCA9554
+	* 	BMC SCL/SDA PCA9554
+	* 	PCA9554
+	*/
+
+	/* pca9545 ->
+	*	PCIe x16 Slot1
+	*	PCIe x8  slot2
+	*	PEX8748
+	*/
+
+	pca9545riser@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c-mux-idle-disconnect;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		bus10_mux239: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus4 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus4";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux240: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus5 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus5";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux241: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux242: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	pca9545@71 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c-mux-idle-disconnect;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		bus10_mux243: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus6 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus6";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux244: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus7 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus7";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux245: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux246: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* TPM */
+	/* RTC RX8900CE */
+	/* FPGA for power sequence */
+	/* TMP275A */
+	/* TMP275A */
+	/* EMC1462 */
+
+	tpm@57 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x57>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	/* chip emc1462 use emc1403 driver */
+	emc1403@4c {
+		compatible = "smsc,emc1403";
+		reg = <0x4c>;
+	};
+
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* pca9545 ->
+	*	SAS BP1
+	*	SAS BP2
+	*	NVMe BP
+	*	M.2 riser
+	*/
+
+	pca9545@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		bus12_mux247: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		bus12_mux248: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		bus12_mux249: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		bus12_mux250: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
+
+	};
+
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* pca9548 ->
+	*	NVMe BP
+	*	NVMe HDD17 to 24
+	*/
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		bus13_mux251: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus13_mux252: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus13_mux253: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus13_mux254: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus13_mux255: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus13_mux256: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus13_mux257: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus13_mux258: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000..b648e468e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000..91dced7e7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi_cfg {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 000000000..eb4e93a57
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+
+		coldfire_memory: codefire_memory@5ee00000 {
+			reg = <0x5ee00000 0x00200000>;
+			no-map;
+		};
+
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5C000000 0x02000000>; /* 32MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 5)>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp423@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&gpio {
+	pin_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin_func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin_gpio_b1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin_gpio_b2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 000000000..fd2e014da
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
new file mode 100644
index 000000000..d56b5ed09
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Swift BMC";
+	compatible = "ibm,swift-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 7)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+
+		oppanel-presence {
+			label = "oppanel-presence";
+			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(A, 7)>;
+		};
+
+		opencapi-riser-presence {
+			label = "opencapi-riser-presence";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(I, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		scm0-presence {
+			label = "scm0-presence";
+			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		scm1-presence {
+			label = "scm1-presence";
+			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		cpu0vrm-presence {
+			label = "cpu0vrm-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		cpu1vrm-presence {
+			label = "cpu1vrm-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		fanboost-presence {
+			label = "fanboost-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fanboost {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps2";
+		reg = <0x68>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps2";
+		reg = <0x69>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	si7021a20@20 {
+		compatible = "si,si7021a20";
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca1: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"P9_SCM0_PRES",	"P9_SCM1_PRES",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca2: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca3: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c11 {
+	/* MUX
+	 *   -> PCIe Slot 0
+	 *   -> PCIe Slot 1
+	 *   -> PCIe Slot 2
+	 *   -> PCIe Slot 3
+	 */
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&sdmmc {
+       status = "okay";
+};
+
+&sdhci1 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sd2_default>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 000000000..0e8851cec
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 000000000..01074b6e3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button_checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		button_identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt";
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000..85d58a63a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 7)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000..4bcc82046
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		pcie-e2b-present{
+			label = "pcie-e2b-present";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
+		compatible = "delta,dps800";
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line_iso_u146_en {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	ncsi_mux_en_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	line_bmc_i2c2_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	line_bmc_i2c5_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 000000000..4a1ca8f5b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label="BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label="BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label="FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000..a68ff0675
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-switch@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
new file mode 100644
index 000000000..f81a540a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -0,0 +1,1436 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2400";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = < 0x1e620000 0x94
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@3 {
+				reg = < 3 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+			flash@4 {
+				reg = < 4 >;
+				compatible = "jedec,spi-nor";
+				status = "disabled";
+			};
+		};
+
+		spi: spi@1e630000 {
+			reg = < 0x1e630000 0x18
+				0x30000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xffffffff 0x0007ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+			valid-sources = <0x7fffffff>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2400-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2h_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2400-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2400-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x8000>;	// 32K
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2400-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2400-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2400-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785000 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785020 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2400-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2400-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2400-lpc-bmc";
+					reg = <0x0 0x80>;
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2400-lpc-ctrl";
+						reg = <0x0 0x10>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop@10 {
+						compatible = "aspeed,ast2400-lpc-snoop";
+						reg = <0x10 0x8>;
+						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2400-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+					lpc_reset: reset-controller@18 {
+						compatible = "aspeed,ast2400-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					ibt: ibt@c0  {
+						compatible = "aspeed,ast2400-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+				};
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_extrst_default: extrst_default {
+		function = "EXTRST";
+		groups = "EXTRST";
+	};
+
+	pinctrl_flack_default: flack_default {
+		function = "FLACK";
+		groups = "FLACK";
+	};
+
+	pinctrl_flbusy_default: flbusy_default {
+		function = "FLBUSY";
+		groups = "FLBUSY";
+	};
+
+	pinctrl_flwp_default: flwp_default {
+		function = "FLWP";
+		groups = "FLWP";
+	};
+
+	pinctrl_gpid_default: gpid_default {
+		function = "GPID";
+		groups = "GPID";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_ndts4_default: ndts4_default {
+		function = "NDTS4";
+		groups = "NDTS4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rom16_default: rom16_default {
+		function = "ROM16";
+		groups = "ROM16";
+	};
+
+	pinctrl_rom8_default: rom8_default {
+		function = "ROM8";
+		groups = "ROM8";
+	};
+
+	pinctrl_romcs1_default: romcs1_default {
+		function = "ROMCS1";
+		groups = "ROMCS1";
+	};
+
+	pinctrl_romcs2_default: romcs2_default {
+		function = "ROMCS2";
+		groups = "ROMCS2";
+	};
+
+	pinctrl_romcs3_default: romcs3_default {
+		function = "ROMCS3";
+		groups = "ROMCS3";
+	};
+
+	pinctrl_romcs4_default: romcs4_default {
+		function = "ROMCS4";
+		groups = "ROMCS4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sgpmck_default: sgpmck_default {
+		function = "SGPMCK";
+		groups = "SGPMCK";
+	};
+
+	pinctrl_sgpmi_default: sgpmi_default {
+		function = "SGPMI";
+		groups = "SGPMI";
+	};
+
+	pinctrl_sgpmld_default: sgpmld_default {
+		function = "SGPMLD";
+		groups = "SGPMLD";
+	};
+
+	pinctrl_sgpmo_default: sgpmo_default {
+		function = "SGPMO";
+		groups = "SGPMO";
+	};
+
+	pinctrl_sgpsck_default: sgpsck_default {
+		function = "SGPSCK";
+		groups = "SGPSCK";
+	};
+
+	pinctrl_sgpsi0_default: sgpsi0_default {
+		function = "SGPSI0";
+		groups = "SGPSI0";
+	};
+
+	pinctrl_sgpsi1_default: sgpsi1_default {
+		function = "SGPSI1";
+		groups = "SGPSI1";
+	};
+
+	pinctrl_sgpsld_default: sgpsld_default {
+		function = "SGPSLD";
+		groups = "SGPSLD";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spics1_default: spics1_default {
+		function = "SPICS1";
+		groups = "SPICS1";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2h_default: usb2h_default {
+		function = "USB2H1";
+		groups = "USB2H1";
+	};
+
+	pinctrl_usb2d_default: usb2d_default {
+		function = "USB2D1";
+		groups = "USB2D1";
+	};
+
+	pinctrl_vgabios_rom_default: vgabios_rom_default {
+		function = "VGABIOS_ROM";
+		groups = "VGABIOS_ROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi18_default: vpi18_default {
+		function = "VPI18";
+		groups = "VPI18";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpi30_default: vpi30_default {
+		function = "VPI30";
+		groups = "VPI30";
+	};
+
+	pinctrl_vpo12_default: vpo12_default {
+		function = "VPO12";
+		groups = "VPO12";
+	};
+
+	pinctrl_vpo24_default: vpo24_default {
+		function = "VPO24";
+		groups = "VPO24";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
new file mode 100644
index 000000000..39e690be1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -0,0 +1,1639 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = < 0x1e620000 0xc4
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = < 0x1e630000 0xc4
+				0x30000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = < 0x1e631000 0xc4
+				0x38000000 0x08000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_CRT1>;
+				status = "disabled";
+				interrupts = <0x19>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2500-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x200>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 232>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				ngpios = <8>;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2500-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
+					reg = <0x0 0x80>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x0 0x80>;
+
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2500-lpc-ctrl";
+						reg = <0x0 0x10>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop@10 {
+						compatible = "aspeed,ast2500-lpc-snoop";
+						reg = <0x10 0x8>;
+						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_reset: reset-controller@18 {
+						compatible = "aspeed,ast2500-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2500-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+
+					ibt: ibt@c0 {
+						compatible = "aspeed,ast2500-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+				};
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgpm_default: sgpm_default {
+		function = "SGPM";
+		groups = "SGPM";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
new file mode 100644
index 000000000..1ef89dd55
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -0,0 +1,1169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+&pinctrl {
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_espialt_default: espialt_default {
+		function = "ESPIALT";
+		groups = "ESPIALT";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspiabr_default: fwspiabr_default {
+		function = "FWSPIABR";
+		groups = "FWSPIABR";
+	};
+
+	pinctrl_fwspid_default: fwspid_default {
+		function = "FWSPID";
+		groups = "FWSPID";
+	};
+
+	pinctrl_fwspiwp_default: fwspiwp_default {
+		function = "FWSPIWP";
+		groups = "FWSPIWP";
+	};
+
+	pinctrl_gpit0_default: gpit0_default {
+		function = "GPIT0";
+		groups = "GPIT0";
+	};
+
+	pinctrl_gpit1_default: gpit1_default {
+		function = "GPIT1";
+		groups = "GPIT1";
+	};
+
+	pinctrl_gpit2_default: gpit2_default {
+		function = "GPIT2";
+		groups = "GPIT2";
+	};
+
+	pinctrl_gpit3_default: gpit3_default {
+		function = "GPIT3";
+		groups = "GPIT3";
+	};
+
+	pinctrl_gpit4_default: gpit4_default {
+		function = "GPIT4";
+		groups = "GPIT4";
+	};
+
+	pinctrl_gpit5_default: gpit5_default {
+		function = "GPIT5";
+		groups = "GPIT5";
+	};
+
+	pinctrl_gpit6_default: gpit6_default {
+		function = "GPIT6";
+		groups = "GPIT6";
+	};
+
+	pinctrl_gpit7_default: gpit7_default {
+		function = "GPIT7";
+		groups = "GPIT7";
+	};
+
+	pinctrl_gpiu0_default: gpiu0_default {
+		function = "GPIU0";
+		groups = "GPIU0";
+	};
+
+	pinctrl_gpiu1_default: gpiu1_default {
+		function = "GPIU1";
+		groups = "GPIU1";
+	};
+
+	pinctrl_gpiu2_default: gpiu2_default {
+		function = "GPIU2";
+		groups = "GPIU2";
+	};
+
+	pinctrl_gpiu3_default: gpiu3_default {
+		function = "GPIU3";
+		groups = "GPIU3";
+	};
+
+	pinctrl_gpiu4_default: gpiu4_default {
+		function = "GPIU4";
+		groups = "GPIU4";
+	};
+
+	pinctrl_gpiu5_default: gpiu5_default {
+		function = "GPIU5";
+		groups = "GPIU5";
+	};
+
+	pinctrl_gpiu6_default: gpiu6_default {
+		function = "GPIU6";
+		groups = "GPIU6";
+	};
+
+	pinctrl_gpiu7_default: gpiu7_default {
+		function = "GPIU7";
+		groups = "GPIU7";
+	};
+
+	pinctrl_hvi3c3_default: hvi3c3_default {
+		function = "I3C3";
+		groups = "HVI3C3";
+	};
+
+	pinctrl_hvi3c4_default: hvi3c4_default {
+		function = "I3C4";
+		groups = "HVI3C4";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i3c3_default: i3c3_default {
+		function = "I3C3";
+		groups = "I3C3";
+	};
+
+	pinctrl_i3c4_default: i3c4_default {
+		function = "I3C4";
+		groups = "I3C4";
+	};
+
+	pinctrl_i3c5_default: i3c5_default {
+		function = "I3C5";
+		groups = "I3C5";
+	};
+
+	pinctrl_i3c6_default: i3c6_default {
+		function = "I3C6";
+		groups = "I3C6";
+	};
+
+	pinctrl_jtagm_default: jtagm_default {
+		function = "JTAGM";
+		groups = "JTAGM";
+	};
+
+	pinctrl_lhpd_default: lhpd_default {
+		function = "LHPD";
+		groups = "LHPD";
+	};
+
+	pinctrl_lhsirq_default: lhsirq_default {
+		function = "LHSIRQ";
+		groups = "LHSIRQ";
+	};
+
+	pinctrl_lpc_default: lpc_default {
+		function = "LPC";
+		groups = "LPC";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_maclink1_default: maclink1_default {
+		function = "MACLINK1";
+		groups = "MACLINK1";
+	};
+
+	pinctrl_maclink2_default: maclink2_default {
+		function = "MACLINK2";
+		groups = "MACLINK2";
+	};
+
+	pinctrl_maclink3_default: maclink3_default {
+		function = "MACLINK3";
+		groups = "MACLINK3";
+	};
+
+	pinctrl_maclink4_default: maclink4_default {
+		function = "MACLINK4";
+		groups = "MACLINK4";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm10g0_default: pwm10g0_default {
+		function = "PWM10";
+		groups = "PWM10G0";
+	};
+
+	pinctrl_pwm10g1_default: pwm10g1_default {
+		function = "PWM10";
+		groups = "PWM10G1";
+	};
+
+	pinctrl_pwm11g0_default: pwm11g0_default {
+		function = "PWM11";
+		groups = "PWM11G0";
+	};
+
+	pinctrl_pwm11g1_default: pwm11g1_default {
+		function = "PWM11";
+		groups = "PWM11G1";
+	};
+
+	pinctrl_pwm12g0_default: pwm12g0_default {
+		function = "PWM12";
+		groups = "PWM12G0";
+	};
+
+	pinctrl_pwm12g1_default: pwm12g1_default {
+		function = "PWM12";
+		groups = "PWM12G1";
+	};
+
+	pinctrl_pwm13g0_default: pwm13g0_default {
+		function = "PWM13";
+		groups = "PWM13G0";
+	};
+
+	pinctrl_pwm13g1_default: pwm13g1_default {
+		function = "PWM13";
+		groups = "PWM13G1";
+	};
+
+	pinctrl_pwm14g0_default: pwm14g0_default {
+		function = "PWM14";
+		groups = "PWM14G0";
+	};
+
+	pinctrl_pwm14g1_default: pwm14g1_default {
+		function = "PWM14";
+		groups = "PWM14G1";
+	};
+
+	pinctrl_pwm15g0_default: pwm15g0_default {
+		function = "PWM15";
+		groups = "PWM15G0";
+	};
+
+	pinctrl_pwm15g1_default: pwm15g1_default {
+		function = "PWM15";
+		groups = "PWM15G1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_pwm8g0_default: pwm8g0_default {
+		function = "PWM8";
+		groups = "PWM8G0";
+	};
+
+	pinctrl_pwm8g1_default: pwm8g1_default {
+		function = "PWM8";
+		groups = "PWM8G1";
+	};
+
+	pinctrl_pwm9g0_default: pwm9g0_default {
+		function = "PWM9";
+		groups = "PWM9G0";
+	};
+
+	pinctrl_pwm9g1_default: pwm9g1_default {
+		function = "PWM9";
+		groups = "PWM9G1";
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		function = "SPI1";
+		groups = "QSPI1";
+	};
+
+	pinctrl_qspi2_default: qspi2_default {
+		function = "SPI2";
+		groups = "QSPI2";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10g0_default: salt10g0_default {
+		function = "SALT10";
+		groups = "SALT10G0";
+	};
+
+	pinctrl_salt10g1_default: salt10g1_default {
+		function = "SALT10";
+		groups = "SALT10G1";
+	};
+
+	pinctrl_salt11g0_default: salt11g0_default {
+		function = "SALT11";
+		groups = "SALT11G0";
+	};
+
+	pinctrl_salt11g1_default: salt11g1_default {
+		function = "SALT11";
+		groups = "SALT11G1";
+	};
+
+	pinctrl_salt12g0_default: salt12g0_default {
+		function = "SALT12";
+		groups = "SALT12G0";
+	};
+
+	pinctrl_salt12g1_default: salt12g1_default {
+		function = "SALT12";
+		groups = "SALT12G1";
+	};
+
+	pinctrl_salt13g0_default: salt13g0_default {
+		function = "SALT13";
+		groups = "SALT13G0";
+	};
+
+	pinctrl_salt13g1_default: salt13g1_default {
+		function = "SALT13";
+		groups = "SALT13G1";
+	};
+
+	pinctrl_salt14g0_default: salt14g0_default {
+		function = "SALT14";
+		groups = "SALT14G0";
+	};
+
+	pinctrl_salt14g1_default: salt14g1_default {
+		function = "SALT14";
+		groups = "SALT14G1";
+	};
+
+	pinctrl_salt15g0_default: salt15g0_default {
+		function = "SALT15";
+		groups = "SALT15G0";
+	};
+
+	pinctrl_salt15g1_default: salt15g1_default {
+		function = "SALT15";
+		groups = "SALT15G1";
+	};
+
+	pinctrl_salt16g0_default: salt16g0_default {
+		function = "SALT16";
+		groups = "SALT16G0";
+	};
+
+	pinctrl_salt16g1_default: salt16g1_default {
+		function = "SALT16";
+		groups = "SALT16G1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9g0_default: salt9g0_default {
+		function = "SALT9";
+		groups = "SALT9G0";
+	};
+
+	pinctrl_salt9g1_default: salt9g1_default {
+		function = "SALT9";
+		groups = "SALT9G1";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "EMMC";
+		groups = "EMMCG4";
+	};
+
+	pinctrl_sgpm1_default: sgpm1_default {
+		function = "SGPM1";
+		groups = "SGPM1";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_tach0_default: tach0_default {
+		function = "TACH0";
+		groups = "TACH0";
+	};
+
+	pinctrl_tach1_default: tach1_default {
+		function = "TACH1";
+		groups = "TACH1";
+	};
+
+	pinctrl_tach10_default: tach10_default {
+		function = "TACH10";
+		groups = "TACH10";
+	};
+
+	pinctrl_tach11_default: tach11_default {
+		function = "TACH11";
+		groups = "TACH11";
+	};
+
+	pinctrl_tach12_default: tach12_default {
+		function = "TACH12";
+		groups = "TACH12";
+	};
+
+	pinctrl_tach13_default: tach13_default {
+		function = "TACH13";
+		groups = "TACH13";
+	};
+
+	pinctrl_tach14_default: tach14_default {
+		function = "TACH14";
+		groups = "TACH14";
+	};
+
+	pinctrl_tach15_default: tach15_default {
+		function = "TACH15";
+		groups = "TACH15";
+	};
+
+	pinctrl_tach2_default: tach2_default {
+		function = "TACH2";
+		groups = "TACH2";
+	};
+
+	pinctrl_tach3_default: tach3_default {
+		function = "TACH3";
+		groups = "TACH3";
+	};
+
+	pinctrl_tach4_default: tach4_default {
+		function = "TACH4";
+		groups = "TACH4";
+	};
+
+	pinctrl_tach5_default: tach5_default {
+		function = "TACH5";
+		groups = "TACH5";
+	};
+
+	pinctrl_tach6_default: tach6_default {
+		function = "TACH6";
+		groups = "TACH6";
+	};
+
+	pinctrl_tach7_default: tach7_default {
+		function = "TACH7";
+		groups = "TACH7";
+	};
+
+	pinctrl_tach8_default: tach8_default {
+		function = "TACH8";
+		groups = "TACH8";
+	};
+
+	pinctrl_tach9_default: tach9_default {
+		function = "TACH9";
+		groups = "TACH9";
+	};
+
+	pinctrl_thru0_default: thru0_default {
+		function = "THRU0";
+		groups = "THRU0";
+	};
+
+	pinctrl_thru1_default: thru1_default {
+		function = "THRU1";
+		groups = "THRU1";
+	};
+
+	pinctrl_thru2_default: thru2_default {
+		function = "THRU2";
+		groups = "THRU2";
+	};
+
+	pinctrl_thru3_default: thru3_default {
+		function = "THRU3";
+		groups = "THRU3";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart10_default: uart10_default {
+		function = "UART10";
+		groups = "UART10";
+	};
+
+	pinctrl_uart11_default: uart11_default {
+		function = "UART11";
+		groups = "UART11";
+	};
+
+	pinctrl_uart12g0_default: uart12g0_default {
+		function = "UART12";
+		groups = "UART12G0";
+	};
+
+	pinctrl_uart12g1_default: uart12g1_default {
+		function = "UART12";
+		groups = "UART12G1";
+	};
+
+	pinctrl_uart13g0_default: uart13g0_default {
+		function = "UART13";
+		groups = "UART13G0";
+	};
+
+	pinctrl_uart13g1_default: uart13g1_default {
+		function = "UART13";
+		groups = "UART13G1";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_uart7_default: uart7_default {
+		function = "UART7";
+		groups = "UART7";
+	};
+
+	pinctrl_uart8_default: uart8_default {
+		function = "UART8";
+		groups = "UART8";
+	};
+
+	pinctrl_uart9_default: uart9_default {
+		function = "UART9";
+		groups = "UART9";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
+	pinctrl_vb_default: vb_default {
+		function = "VB";
+		groups = "VB";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_wdtrst3_default: wdtrst3_default {
+		function = "WDTRST3";
+		groups = "WDTRST3";
+	};
+
+	pinctrl_wdtrst4_default: wdtrst4_default {
+		function = "WDTRST4";
+		groups = "WDTRST4";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
new file mode 100644
index 000000000..1cf71bdb4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -0,0 +1,922 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart1;
+		serial6 = &vuart2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		fmc: spi@1e620000 {
+			reg = < 0x1e620000 0xc4
+				0x20000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = < 0x1e630000 0xc4
+				0x30000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = < 0x1e631000 0xc4
+				0x50000000 0x10000000 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio1_default>;
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio2_default>;
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio3_default>;
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio4_default>;
+		};
+
+		mac0: ftgmac@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ftgmac@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ftgmac@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ftgmac@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+				reset-names = "device", "root-complex";
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x400>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <208>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio@1e780800 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 208 36>;
+				ngpios = <36>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2600-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				clock-names = "PCLK";
+				status = "disabled";
+                        };
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850c0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
+					reg = <0x0 0x80>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x0 0x80>;
+
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <1>;
+						status = "disabled";
+					};
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
+						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2600-lpc-ctrl";
+						reg = <0x0 0x80>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop@0 {
+						compatible = "aspeed,ast2600-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2600-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+					lpc_reset: reset-controller@18 {
+						compatible = "aspeed,ast2600-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					ibt: ibt@c0 {
+						compatible = "aspeed,ast2600-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+				};
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+
+			vuart1: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart2: serial@1e788000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"
+
+&i2c {
+	i2c0: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		status = "disabled";
+	};
+
+	i2c1: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x100 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_default>;
+		status = "disabled";
+	};
+
+	i2c2: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x180 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x200 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x280 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x300 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x380 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x400 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x480 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x500 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x580 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x600 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x680 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x700 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+
+	i2c14: i2c-bus@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x780 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c15_default>;
+		status = "disabled";
+	};
+
+	i2c15: i2c-bus@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x800 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c16_default>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000..c0c43b864
--- /dev/null
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	fmc_flash0: flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+	};
+
+	fmc_flash1: flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+	};
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
new file mode 100644
index 000000000..713d18f80
--- /dev/null
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
+ *                    Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Aria G25";
+	compatible = "acme,ariag25", "atmel,at91sam9x5ek",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		/* 128 MB, change this for 256 MB revision */
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* little green LED in middle of Aria G25 module */
+		aria_led {
+			label = "aria_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1_0>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+	phy-mode = "rmii";
+	/*
+	 * following can be overwritten by bootloader:
+	 * for example u-boot 'ftd set' command
+	 */
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+};
+
+
+&mmc0 {
+	/* N.B. Aria has no SD card detect (CD), assumed present */
+
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	w1_0 {
+		pinctrl_w1_0: w1_0-0 {
+			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&usart0 {
+	pinctrl-0 = <&pinctrl_usart0
+		     &pinctrl_usart0_rts
+		     &pinctrl_usart0_cts>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1
+		     /* &pinctrl_usart1_rts */
+		     /* &pinctrl_usart1_cts */
+		    >;
+	status = "okay";
+};
+
+&usart2 {
+	/* cannot activate RTS2+CTS2, clash with
+	 * ethernet on PB0 and PB1 */
+	pinctrl-0 = <&pinctrl_usart2>;
+	status = "okay";
+};
+
+&usart3 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xf8028000 0x200>;
+	interrupts = <8 4 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3
+		     /* &pinctrl_usart3_rts */
+		     /* &pinctrl_usart3_cts */
+		    >;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <3>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
new file mode 100644
index 000000000..2c52a7175
--- /dev/null
+++ b/arch/arm/boot/dts/at91-ariettag25.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Acme Systems Arietta G25";
+	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		arietta_led {
+			label = "arietta_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	num-ports = <3>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
new file mode 100644
index 000000000..ee0f5da6d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ *	Copyright (C) 2012 Atmel,
+ *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+	model = "HCE Cosino core module";
+	compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0x80000>;
+				};
+
+				ubootenv@c0000 {
+					label = "U-Boot Env";
+					reg = <0xc0000 0x140000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
new file mode 100644
index 000000000..04cb7bee9
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ *			      Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ *			HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * 	Copyright (C) 2012 Atmel,
+ *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+	model = "HCE Cosino Mega 2560";
+	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
new file mode 100644
index 000000000..ededd5b0d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
new file mode 100644
index 000000000..c1c8650da
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	spi-flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 000000000..bea920b19
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@38 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
new file mode 100644
index 000000000..7edf05704
--- /dev/null
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
+ *
+ * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
+ *
+ * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Acme Systems FoxG20";
+	compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			uart0: serial@fffd4000 {
+				status = "okay";
+			};
+
+			uart1: serial@fffd8000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* CD pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* TWD (SDA), open drain */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* TWCK (SCL), open drain */
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* red LED marked "PC7" near mini USB (device) receptacle */
+		user_led {
+			label = "user_led";
+			gpios = <&pioC 7 GPIO_ACTIVE_HIGH>;	/* PC7 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn {
+			label = "Button";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
new file mode 100644
index 000000000..5a81cab5f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
new file mode 100644
index 000000000..7add151f6
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		network_green {
+			label = "pwm:green:network";
+			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		network_red {
+			label = "pwm:red:network";
+			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_green {
+			label = "pwm:green:user";
+			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_red {
+			label = "pwm:red:user";
+			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	tcb_pwm: pwm {
+		compatible = "atmel,tcb-pwm";
+		#pwm-cells = <3>;
+		tc-block = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0
+			     &pinctrl_tcb1_tioa1
+			     &pinctrl_tcb1_tioa2
+			     &pinctrl_tcb1_tiob0>;
+	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts
new file mode 100644
index 000000000..cab8b3579
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *	    Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox 2 with two heads";
+	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+		     "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
new file mode 100644
index 000000000..25f761065
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *          Gaël Portay <g.portay@overkiz.com>
+ *          Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic: act8865@5b {
+		compatible = "active-semi,act8865";
+		reg = <0x5b>;
+		status = "okay";
+
+		regulators {
+			vcc_1v8_reg: DCDC_REG1 {
+				regulator-name = "VCC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc_1v2_reg: DCDC_REG2 {
+				regulator-name = "VCC_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3_reg: DCDC_REG3 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vddfuse_reg: LDO_REG1 {
+				regulator-name = "FUSE_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vddana_reg: LDO_REG2 {
+				regulator-name = "VDDANA";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vled_reg: LDO_REG3 {
+				regulator-name = "VLED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v3v8_rf_reg: LDO_REG4 {
+				regulator-name = "V3V8_RF";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <3800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart2 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+		     &pinctrl_pwm0_pwmh1_1
+		     &pinctrl_pwm0_pwmh2_0>;
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <3333>;
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+/* WMBUS (inverted with IO in the latest schematic) */
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* RTS */
+&pinctrl_usart1 {
+	atmel,pins =
+		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* IO (inverted with WMBUS in the latest schematic) */
+&pinctrl_usart2 {
+	atmel,pins =
+		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
new file mode 100644
index 000000000..0da1f0557
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	pwm_leds {
+		status = "okay";
+
+		red {
+			status = "okay";
+		};
+
+		green {
+			status = "okay";
+		};
+
+		blue {
+			status = "okay";
+		};
+
+		white {
+			status = "okay";
+		};
+	};
+
+	leds  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		red {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		white {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		SW1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		SW2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		SW3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		SW7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		SW8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux=  <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain = <1>;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
new file mode 100644
index 000000000..dc77d8e80
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
+ * family SoC boards
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox3";
+	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart8;
+	};
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	vdd_adc_vddana: supply_3v3_ana {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vddana";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc_vref: supply_3v3_ref {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
+			     &pinctrl_pwm0_pwm_h1
+			     &pinctrl_pwm0_pwm_h2
+			     &pinctrl_pwm0_pwm_h3>;
+		status = "disabled";
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		white {
+			label = "pwm:white:user";
+			pwms = <&pwm0 3 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+		pinctrl-names = "default";
+		reg = <0x3 0x0 0x800000>;
+
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			u-boot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x140000>;
+			};
+
+			u-boot-factory@160000 {
+				label = "u-boot-factory";
+				reg = <0x160000 0x140000>;
+			};
+
+			ubi@2A0000 {
+				label = "ubi";
+				reg = <0x2A0000 0x7D60000>;
+			};
+		};
+
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_ebi_nand_addr: ebi-addr-1 {
+		pinmux = <PIN_PA0__D0>,
+			<PIN_PA1__D1>,
+			<PIN_PA2__D2>,
+			<PIN_PA3__D3>,
+			<PIN_PA4__D4>,
+			<PIN_PA5__D5>,
+			<PIN_PA6__D6>,
+			<PIN_PA7__D7>,
+			<PIN_PA8__NWE_NANDWE>,
+			<PIN_PA9__NCS3>,
+			<PIN_PA10__A21_NANDALE>,
+			<PIN_PA11__A22_NANDCLE>,
+			<PIN_PA21__NANDRDY>;
+		bias-disable;
+	};
+
+	pinctrl_usart {
+		pinctrl_usart_0: usart0-0 {
+			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
+			bias-disable;
+		};
+		pinctrl_usart_1: usart1-0 {
+			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
+			bias-disable;
+		};
+		pinctrl_usart_2: usart2-0 {
+			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
+			bias-disable;
+		};
+		pinctrl_usart_3: usart3-0 {
+			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
+			bias-disable;
+		};
+		pinctrl_usart_4: usart4-0 {
+			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
+			bias-disable;
+		};
+		pinctrl_flx0_default: flx0_usart_default {
+			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
+			<PIN_PB29__FLEXCOM0_IO1>; //RX
+			bias-disable;
+		};
+		pinctrl_flx3_default: flx3_usart_default {
+			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
+			<PIN_PB23__FLEXCOM3_IO0>; //TX
+			bias-disable;
+		};
+	};
+
+	pinctrl_flx4_default: flx4_i2c6_default {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
+		<PIN_PD13__FLEXCOM4_IO1>; //CLK
+		bias-disable;
+		drive-open-drain = <1>;
+	};
+
+	pinctrl_pwm0 {
+		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
+			pinmux = <PIN_PA30__PWMH0>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
+			pinmux = <PIN_PB0__PWMH1>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
+			pinmux = <PIN_PB5__PWMH2>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
+			pinmux = <PIN_PB7__PWMH3>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_adc {
+		pinctrl_adc2: adc2 {
+			pinmux = <PIN_PD21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc3: adc3 {
+			pinmux = <PIN_PD22__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc4: adc4 {
+			pinmux = <PIN_PD23__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc5: adc5 {
+			pinmux = <PIN_PD24__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_0>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+/* debug uart */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_1>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_2>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_3>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_4>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart5: serial@200  {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart8: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "disabled";
+
+	i2c6: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc2
+		     &pinctrl_adc3
+		     &pinctrl_adc4
+		     &pinctrl_adc5>;
+
+	vddana-supply = <&vdd_adc_vddana>;
+	vref-supply = <&vdd_adc_vref>;
+	status = "disabled";
+};
+
+&securam {
+	export;
+
+	/* export overkiz u-boot mode/version and factory */
+	uboot@1400 {
+		reg = <0x1400 0x20>;
+		export;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts
new file mode 100644
index 000000000..81c29ca5c
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
new file mode 100644
index 000000000..d37724c10
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+#include "at91sam9g25.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds: pwm_leds {
+		compatible = "pwm-leds";
+
+		led_blue: pwm_blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: pwm_green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led_red: pwm_red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
new file mode 100644
index 000000000..c07d3076a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
new file mode 100644
index 000000000..ab50f4d22
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi
new file mode 100644
index 000000000..533a440d5
--- /dev/null
+++ b/arch/arm/boot/dts/at91-linea.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	compatible = "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
new file mode 100644
index 000000000..49f0a0c46
--- /dev/null
+++ b/arch/arm/boot/dts/at91-natte.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+/ {
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	batntc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batntc0", "batntc1", "batntc2", "batntc3",
+			"batntc4", "batntc5", "batntc6", "batntc7";
+	};
+
+	batv-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batv0", "batv1", "batv2", "batv3",
+			"batv4", "batv5", "batv6", "batv7";
+	};
+
+	iout-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"iout0", "iout1", "iout2", "iout3",
+			"iout4", "iout5", "iout6", "iout7";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		mux-locked;
+		i2c-parent = <&i2c0>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ioexp: ioexp@20 {
+		#gpio-cells = <2>;
+		compatible = "semtech,sx1502q";
+		reg = <0x20>;
+
+		gpio-controller;
+		ngpios = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio3_cfg_pins>;
+
+		gpio3_cfg_pins: gpio3_cfg {
+			pins = "gpio3";
+			bias-pull-up;
+		};
+	};
+
+	adc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000..4f123477e
--- /dev/null
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
new file mode 100644
index 000000000..969d99076
--- /dev/null
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
+ *
+ * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+/ {
+	model = "Calao QIL A9260";
+	compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				pinctrl-0 =
+					<&pinctrl_usart2
+					 &pinctrl_usart2_rts
+					 &pinctrl_usart2_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
+
+				m41t94@0 {
+					compatible = "st,m41t94";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@a0000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@c0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4c0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7cc0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
new file mode 100644
index 000000000..1e2a28c2f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
new file mode 100644
index 000000000..fd8dc1183
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators: regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_1v8: fixed-regulator-vdd_1v8@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd_1v5: fixed-regulator-vdd_1v5@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD1_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD2_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code=<KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi0: spi@400 {
+		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+		clock-names = "spi_clk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		atmel,fifo-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart1: serial@200 {
+		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(10))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
new file mode 100644
index 000000000..e4824abb3
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0	= &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@00000000 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@00040000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@00100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@00140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@00180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@00200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				phy-mode = "rmii";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
new file mode 100644
index 000000000..0a53f21a8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1	= &i2c1;
+		i2c2	= &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			mmc-ddr-3_3v;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay";
+		};
+
+		apb {
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c3: i2c@600 {
+					dmas = <0>, <0>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					status = "okay";
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+					atmel,wakeup-type = "low";
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			flx3: flexcom@fc014000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi5: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "okay";
+
+				uart9: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
+				};
+
+				spi6: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					status = "okay"; /* Conflict with uart5 and i2c6. */
+				};
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with uart5 and spi6. */
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "okay";
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+
+				status = "disabled";
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				pinctrl_flx3_default: flx3_default {
+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+						 <PIN_PC19__FLEXCOM3_IO1>,
+						 <PIN_PC18__FLEXCOM3_IO2>,
+						 <PIN_PC21__FLEXCOM3_IO3>,
+						 <PIN_PC22__FLEXCOM3_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_isc_base: isc_base {
+					pinmux = <PIN_PC21__ISC_PCK>,
+						 <PIN_PC22__ISC_VSYNC>,
+						 <PIN_PC23__ISC_HSYNC>,
+						 <PIN_PC24__ISC_MCK>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_8bit: isc_data_8bit {
+					pinmux = <PIN_PC20__ISC_D11>,
+						 <PIN_PC19__ISC_D10>,
+						 <PIN_PC18__ISC_D9>,
+						 <PIN_PC17__ISC_D8>,
+						 <PIN_PC16__ISC_D7>,
+						 <PIN_PC15__ISC_D6>,
+						 <PIN_PC14__ISC_D5>,
+						 <PIN_PC13__ISC_D4>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_9_10: isc_data_9_10 {
+					pinmux = <PIN_PC12__ISC_D3>,
+						 <PIN_PC11__ISC_D2>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_11_12: isc_data_11_12 {
+					pinmux = <PIN_PC10__ISC_D1>,
+						 <PIN_PC9__ISC_D0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA29__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PA10__GPIO>,
+						 <PIN_PB1__GPIO>,
+						 <PIN_PA31__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PC12__URXD3>,
+						 <PIN_PC13__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PA27__GPIO>,
+						 <PIN_PD19__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PD20__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_an: mikrobus1_an {
+					pinmux = <PIN_PD25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_an: mikrobus2_an {
+					pinmux = <PIN_PD26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_rst: mikrobus1_rst {
+					pinmux = <PIN_PB2__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_rst: mikrobus2_rst {
+					pinmux = <PIN_PA26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_spi: mikrobus_spi {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+					pinmux = <PIN_PB1__PWML1>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+					pinmux = <PIN_PA31__PWML0>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_int: mikrobus1_int {
+					pinmux = <PIN_PB0__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_int: mikrobus2_int {
+					pinmux = <PIN_PA25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_uart: mikrobus1_uart {
+					pinmux = <PIN_PB3__URXD4>,
+						 <PIN_PB4__UTXD4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_uart: mikrobus2_uart {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+						 <PIN_PA23__FLEXCOM1_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_uart_default {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>,
+						 <PIN_PC31__FLEXCOM4_IO3>,
+						 <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		pb4 {
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000..9c8b3eb49
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000..20bcb7480
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: spi_flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
new file mode 100644
index 000000000..00b9e88ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0	= &i2c0;
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 000000000..317c6ddb5
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip/Atmel,
+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		i2c0	= &i2c0;	/* mikroBUS 1 */
+		i2c1	= &i2c1;	/* XPRO EXT1 */
+		i2c2	= &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand_default>;
+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@0x100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@0x140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+
+				input@0 {
+					reg = <0>;
+					atmel,wakeup-type = "low";
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			spi1: spi@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PC6__TWD1>,
+						 <PIN_PC7__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB6__GPIO>,
+						 <PIN_PB8__GPIO>,
+						 <PIN_PB10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PB24__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_nand_default: nand_default {
+					re_we_data {
+						pinmux = <PIN_PA22__D0>,
+							 <PIN_PA23__D1>,
+							 <PIN_PA24__D2>,
+							 <PIN_PA25__D3>,
+							 <PIN_PA26__D4>,
+							 <PIN_PA27__D5>,
+							 <PIN_PA28__D6>,
+							 <PIN_PA29__D7>,
+							 <PIN_PA30__NWE_NANDWE>,
+							 <PIN_PB2__NRD_NANDOE>;
+						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+					};
+
+					ale_cle_rdy_cs {
+						pinmux = <PIN_PB0__A21_NANDALE>,
+							 <PIN_PB1__A22_NANDCLE>,
+							 <PIN_PC8__NANDRDY>,
+							 <PIN_PA31__NCS3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_spi1_default: spi1_default {
+					pinmux = <PIN_PC1__SPI1_SPCK>,
+						 <PIN_PC2__SPI1_MOSI>,
+						 <PIN_PC3__SPI1_MISO>,
+						 <PIN_PC4__SPI1_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart0_default: uart0_default {
+					pinmux = <PIN_PB26__URXD0>,
+						 <PIN_PB27__UTXD0>;
+					bias-disable;
+				};
+
+				pinctrl_uart2_default: uart2_default {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PB11__GPIO>;
+					bias-disable;
+				};
+
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000..08c5182ba
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-1_8v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@00000000 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@00040000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@00100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@00140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@00180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@00200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@00800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt=<1400000>;
+								regulator-suspend-max-microvolt=<1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+					atmel,wakeup-type = "low";
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
new file mode 100644
index 000000000..cc55d1684
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f0010000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii-rxid";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 000000000..710cb72bd
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 000000000..4d7cee569
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
new file mode 100644
index 000000000..73cb157c4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			uart0: serial@f8004000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				i2c-digital-filter;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
new file mode 100644
index 000000000..fe432b6b7
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				touchscreen@4c {
+					compatible = "atmel,maxtouch";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts
new file mode 100644
index 000000000..106f23ba4
--- /dev/null
+++ b/arch/arm/boot/dts/at91-smartkiz.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&leds {
+	blue {
+		status = "okay";
+	};
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
new file mode 100644
index 000000000..39474a112
--- /dev/null
+++ b/arch/arm/boot/dts/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
new file mode 100644
index 000000000..7e5c598e7
--- /dev/null
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+	model = "Axentia TSE-850 3.0";
+	compatible = "axentia,tse850v3", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	sck: oscillator {
+		compatible = "fixed-clock";
+
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "sck";
+	};
+
+	reg_3v3: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ana: reg-ana {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&pcm5142>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
+
+	dac: dpot-dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	env_det: envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+		#io-channel-cells = <1>;
+
+		interrupt-parent = <&pioA>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "comp";
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ch1-red {
+			label = "ch-1:red";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+		ch1-green {
+			label = "ch-1:green";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+		ch2-red {
+			label = "ch-2:red";
+			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		};
+		ch2-green {
+			label = "ch-2:green";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+		data-red {
+			label = "data:red";
+			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+		};
+		data-green {
+			label = "data:green";
+			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+		};
+		alarm-red {
+			label = "alarm:red";
+			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+		};
+		alarm-green {
+			label = "alarm:green";
+			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "bootloader";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x0f800000>;
+		};
+
+		ovlfs@10000000 {
+			label = "ovlfs";
+			reg = <0x10000000 0x10000000>;
+		};
+	};
+};
+
+&ssc0 {
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	dpot: mcp4651-104@28 {
+		compatible = "microchip,mcp4651-104";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+	};
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_3v3>;
+		DVDD-supply = <&reg_3v3>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+
+		pll-in = <3>;
+		pll-out = <6>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+	pinctrl-names = "default";
+};
+
+&macb1 {
+	status = "okay";
+
+	phy-mode = "rmii";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: ethernet-phy@3 {
+		reg = <3>;
+
+		interrupt-parent = <&pioE>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	status = "okay";
+
+	num-ports = <1>;
+	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
new file mode 100644
index 000000000..a51a3372a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disable";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disable";
+		};
+
+		usb2: ehci@600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
new file mode 100644
index 000000000..54d130c92
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		irqbtn@18 {
+			reg = <18>;
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
new file mode 100644
index 000000000..430c75358
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
new file mode 100644
index 000000000..a5e45bb95
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		btn0@10 {
+			reg = <10>;
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		irqbtn@31 {
+			reg = <31>;
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
new file mode 100644
index 000000000..74b249bb6
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
new file mode 100644
index 000000000..21344fbc8
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -0,0 +1,723 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91RM9200 family SoC";
+	compatible = "atmel,at91rm9200";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm920t";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <25 26 27 28 29 30 31>;
+			};
+
+			ramc0: ramc@ffffff00 {
+				compatible = "atmel,at91rm9200-sdramc", "syscon";
+				reg = <0xffffff00 0x100>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			st: timer@fffffd00 {
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
+				reg = <0xfffffd00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
+			};
+
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffa4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa4000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
+					      21 IRQ_TYPE_LEVEL_HIGH 0
+					      22 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			i2c0: i2c@fffb8000 {
+				compatible = "atmel,at91rm9200-i2c";
+				reg = <0xfffb8000 0x4000>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_twi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffb4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffd0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffd4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffd8000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd8000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ether_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+					/*    A         B     */
+					 0xffffffff 0xffffffff  /* pioA */
+					 0xffffffff 0x083fffff  /* pioB */
+					 0xffff3fff 0x00000000  /* pioC */
+					 0x03ff87ff 0x0fffff80  /* pioD */
+					>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart0_cts: uart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A */
+					};
+
+					pinctrl_uart0_rts: uart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart1_rts: uart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB24 periph A */
+					};
+
+					pinctrl_uart1_cts: uart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+
+					pinctrl_uart1_dcd: uart1_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart1_ri: uart1_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_uart2_rts: uart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+
+					pinctrl_uart2_cts: uart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA31 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_uart3_rts: uart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_uart3_cts: uart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC2 gpio RDY pin pull_up */
+							 AT91_PIOB 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PB1 gpio CD pin pull_up */
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA7 periph A */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA8 periph A */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB12 periph B */
+							 AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB13 periph B */
+							 AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB15 periph B */
+							 AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB16 periph B */
+							 AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB17 periph B */
+							 AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB18 periph B */
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB19 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA29 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB3 periph B with pullup */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PB4 periph B with pullup */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PB5 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA8 periph B with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA9 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA10 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA12 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A */
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+
+				twi {
+					pinctrl_twi: twi-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE	/* PA25 periph A with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 periph A with multi drive */
+					};
+
+					pinctrl_twi_gpio: twi_gpio-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA25 GPIO with multi drive */
+							 AT91_PIOA 26 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA26 GPIO with multi drive */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffc0000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffc4000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffc8000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffcc000 {
+				compatible = "atmel,at91rm9200-usart";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffb0000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffb0000 0x4000>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffe0000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			nand-ecc-mode = "soft";
+			gpios = <&pioC 2 GPIO_ACTIVE_HIGH
+				 0
+				 &pioB 1 GPIO_ACTIVE_HIGH
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@300000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00300000 0x100000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_twi_gpio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
new file mode 100644
index 000000000..c3d4177b9
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+	compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
new file mode 100644
index 000000000..e1ef4e44e
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
+ *
+ *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Atmel AT91RM9200 evaluation kit";
+	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffb0000 {
+				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy {
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+
+			usart1: serial@fffc4000 {
+				pinctrl-0 =
+						<&pinctrl_uart1
+						 &pinctrl_uart1_rts
+						 &pinctrl_uart1_cts
+						 &pinctrl_uart1_dtr_dsr
+						 &pinctrl_uart1_dcd
+						 &pinctrl_uart1_ri>;
+				status = "okay";
+			};
+
+			spi0: spi@fffe0000 {
+				status = "okay";
+				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc: rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nor_flash@10000000 {
+			compatible = "cfi-flash";
+			reg = <0x10000000 0x800000>;
+			linux,mtd-name = "physmap-flash.0";
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			barebox@0 {
+				label = "barebox";
+				reg = <0x00000 0x40000>;
+			};
+
+			bareboxenv@40000 {
+				label = "bareboxenv";
+				reg = <0x40000 0x10000>;
+			};
+
+			kernel@50000 {
+				label = "kernel";
+				reg = <0x50000 0x300000>;
+			};
+
+			root@350000  {
+				label = "root";
+				reg = <0x350000 0x4B0000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds2 {
+			label = "green";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		ds4 {
+			label = "yellow";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds6 {
+			label = "red";
+			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 000000000..82c5d7fd9
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <5000000>;
+		};
+	};
+
+	sram0: sram@2ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002ff000 0x2000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9260-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
+					      18 IRQ_TYPE_LEVEL_HIGH 0
+					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
+					      27 IRQ_TYPE_LEVEL_HIGH 0
+					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc00c3b  /* pioA */
+				       0xffffffff 0x7fff3ccf  /* pioB */
+				       0xffffffff 0x007fffff  /* pioC */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB26 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A */
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB22 periph A */
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB23 periph A */
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB25 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB28 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB29 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA19 periph A */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA20 periph A */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA21 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA23 periph B */
+							 AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+
+					pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA10 periph B */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA11 periph B */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA26 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA6 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA1 periph B with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA0 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA4 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA3 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB19 periph A */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB20 periph A */
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA1 periph A SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI1_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI1_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI1_SPCK pin */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
+							 AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <15>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger1 {
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger2 {
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger3 {
+					trigger-name = "external";
+					trigger-value = <0xd>;
+					trigger-external;
+				};
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9260-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c_gpio0: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
new file mode 100644
index 000000000..ce96345d2
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
new file mode 100644
index 000000000..7adc36ca8
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x28000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9261-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9261-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91sam9261-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9261-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9261-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
new file mode 100644
index 000000000..8f3b483bb
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+		fb0: fb@600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer1: timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@2 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					wakeup-source;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button_0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+		};
+
+		button_1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			wakeup-source;
+		};
+
+		button_2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			wakeup-source;
+		};
+
+		button_3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644
index 000000000..fe45d9623
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram0: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x14000>;
+	};
+
+	sram1: sram@500000 {
+		compatible = "mmio-sram";
+		reg = <0x00500000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00500000 0x4000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <30 31>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9263-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
+			};
+
+			ramc0: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200>;
+			};
+
+			smc0: smc@ffffe400 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe400 0x200>;
+			};
+
+			ramc1: ramc@ffffe800 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe800 0x200>;
+			};
+
+			smc1: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffec00 {
+				compatible = "atmel,at91sam9263-matrix", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xfffffffb 0xffffe07f  /* pioA */
+				       0x0007ffff 0x39072fff  /* pioB */
+				       0xffffffff 0x3ffffff8  /* pioC */
+				       0xfffffbff 0xffffffff  /* pioD */
+				       0xffe00fff 0xfbfcff00  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA28 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA29 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD7 periph B */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD8 periph B */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD5 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD6 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC22 periph B */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC23 periph B */
+							 AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC24 periph B */
+							 AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC25 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOE 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE22 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA12 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA0 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA17 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk: mmc1_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+					};
+
+					pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA8 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA9 periph A with pullup */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA10 periph A with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA11 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA21 periph A with pullup */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA22 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA23 periph A with pullup */
+							 AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA25 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB0 periph B */
+							 AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB1 periph B */
+							 AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B */
+							 AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA0 periph B SPI0_MISO pin */
+							 AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA1 periph B SPI0_MOSI pin */
+							 AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA2 periph B SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A SPI1_MISO pin */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A SPI1_MOSI pin */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOE 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOE 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB9 periph B */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 periph A */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 periph A */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC12 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC18 periph A */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC24 periph A */
+							 AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC17 periph B */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC26 periph A */
+							 AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC27 periph A */
+					};
+				};
+
+				can {
+					pinctrl_can_rx_tx: can_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
+					};
+				};
+
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff98000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff98000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fff9c000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91sam9263-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fff88000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fff84000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff84000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			can: can@fffac000 {
+				compatible = "atmel,at91sam9263-can";
+				reg = <0xfffac000 0x300>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "can_clk";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			rtc@fffffd50 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd50 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x50>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@700000 {
+			compatible = "atmel,at91sam9263-lcdc";
+			reg = <0x00700000 0x1000>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		usb0: ohci@a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi0: ebi@10000000 {
+			compatible = "atmel,at91sam9263-ebi0";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc0>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller0: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		ebi1: ebi@70000000 {
+			compatible = "atmel,at91sam9263-ebi1";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc1>;
+			atmel,matrix = <&matrix>;
+			reg = <0x80000000 0x20000000>;
+			ranges = <0x0 0x0 0x80000000 0x10000000
+				  0x1 0x0 0x90000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller1: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 000000000..71f605767
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fff8c000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000 {
+				status = "okay";
+				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@700000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
new file mode 100644
index 000000000..dde88276f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+	      /*    A         B          C     */
+	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+	       0x00040000 0x00047e3f 0x00000000  /* pioB */
+	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+	       0x003fffff 0x003f8000 0x00000000  /* pioD */
+	      >;
+};
+
+&pmc {
+	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
new file mode 100644
index 000000000..889a5097e
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 000000000..708e1646b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G20 family SoC";
+	compatible = "atmel,at91sam9g20";
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@2fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002fc000 0x8000>;
+	};
+
+	ahb {
+		apb {
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9g20-i2c";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
new file mode 100644
index 000000000..6de7a7cd3
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 000000000..2db95e8ff
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb{
+			mmc0: mmc@fffa8000 {
+				/* clk already mux wuth slot0 */
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot0
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0_slot0 {
+					pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC2 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 000000000..4783e657b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				board {
+					pinctrl_pck0_as_mck: pck0_as_mck {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
+					};
+
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				mtd_dataflash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+
+		wm8731: wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		btn3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		btn4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "atmel,at91sam9g20ek-wm8731-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+		atmel,model = "wm8731 @ AT91SAMG20EK";
+
+		atmel,audio-routing =
+			"Ext Spk", "LHPOUT",
+			"Int Mic", "MICIN";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 000000000..7da70aeeb
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ *  Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GARDENA smart Gateway (Article No. 19000)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+		"atmel,at91sam9";
+
+	aliases {
+		serial1 = &usart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user_btn1 {
+			label = "USER_BTN1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+		};
+	};
+
+	1wire_cm {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat {
+			label = "smartgw:heartbeat";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pb18 {
+			status = "disabled";
+		};
+
+		pd21 {
+			status = "disabled";
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&usart2 {
+	status = "disabled";
+};
+
+&usart3 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_usart3
+		     &pinctrl_usart3_rts
+		     &pinctrl_usart3_cts
+		    >;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&ssc0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
new file mode 100644
index 000000000..d2f13afb3
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_isi.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel,at91sam9g25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
new file mode 100644
index 000000000..61b0bdb61
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
new file mode 100644
index 000000000..48c2bc4a7
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel,at91sam9g35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
new file mode 100644
index 000000000..f966b56de
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
new file mode 100644
index 000000000..19fc748a8
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -0,0 +1,1044 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffe800 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe800 0x200>;
+			};
+
+			matrix: matrix@ffffea00 {
+				compatible = "atmel,at91sam9g45-matrix", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9rl-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+
+				atmel,mux-mask = <
+				      /*    A         B     */
+				       0xffffffff 0xffc003ff  /* pioA */
+				       0xffffffff 0x800f8f00  /* pioB */
+				       0xffffffff 0x00000e00  /* pioC */
+				       0xffffffff 0xff0c1381  /* pioD */
+				       0xffffffff 0x81ffff81  /* pioE */
+				      >;
+
+				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA21 periph A TWCK0 */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA20 periph A TWD0 */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A TWCK1 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A TWD1 */
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB17 periph B */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD17 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC9 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC11 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA24 periph B */
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA10 periph A */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA13 periph A */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA14 periph A */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA15 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA16 periph A */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA18 periph A */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA19 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA6 periph B */
+							 AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA7 periph B */
+							 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA8 periph B */
+							 AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA9 periph B */
+							 AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA29 periph B */
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA0 periph A */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA2 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA3 periph A with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA4 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA5 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA9 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA31 periph A */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA22 periph A with pullup */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA24 periph A with pullup */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA25 periph A with pullup */
+							 AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA26 periph A with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA27 periph A with pullup */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA28 periph A with pullup */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA29 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA30 periph A with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A */
+							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD4 periph A */
+							 AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD13 periph A */
+							 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A */
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD15 periph A */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A SPI0_MISO pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A SPI0_MOSI pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB2 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A SPI1_MISO pin */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A SPI1_MOSI pin */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB16 periph A SPI1_SPCK pin */
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE0 periph A */
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE2 periph A */
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE3 periph A */
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE4 periph A */
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE5 periph A */
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE6 periph A */
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE7 periph A */
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE8 periph A */
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE9 periph A */
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE10 periph A */
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE11 periph A */
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE12 periph A */
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE13 periph A */
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE14 periph A */
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE15 periph A */
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE16 periph A */
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE17 periph A */
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE18 periph A */
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE19 periph A */
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE20 periph A */
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE21 periph A */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE22 periph A */
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE23 periph A */
+							 AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE24 periph A */
+							 AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE25 periph A */
+							 AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE26 periph A */
+							 AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE27 periph A */
+							 AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE28 periph A */
+							 AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PE29 periph A */
+							 AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PE30 periph A */
+					};
+				};
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			};
+
+			i2c0: i2c@fff84000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff84000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fff88000 {
+				compatible = "atmel,at91sam9g10-i2c";
+				reg = <0xfff88000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fff9c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfff9c000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffa0000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9g45-adc";
+				reg = <0xfffb0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffb8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			mmc0: mmc@fff80000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfff80000 0x600>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fffd0000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffd0000 0x600>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+				dma-names = "rxtx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			spi0: spi@fffa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa4000 0x200>;
+				interrupts = <14 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffa8000 0x200>;
+				interrupts = <15 4 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@fff78000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00600000 0x80000
+				       0xfff78000 0x400>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			clk32k: sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+		};
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9g45-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		usb0: ohci@700000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@800000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00800000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9g45-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
new file mode 100644
index 000000000..9734667ab
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart1: serial@fff90000 {
+				pinctrl-0 =
+					<&pinctrl_usart1
+					 &pinctrl_usart1_rts
+					 &pinctrl_usart1_cts>;
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			i2c0: i2c@fff84000 {
+				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			i2c1: i2c@fff88000 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mmc1: mmc@fffd0000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc1
+					&pinctrl_mmc1_slot0_clk_cmd_dat0
+					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD10 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				mmc1 {
+					pinctrl_board_mmc1: mmc1-board {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PD11 gpio CD pin pull up and deglitch */
+							 AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD29 gpio WP pin pull up */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm_leds: pwm-led {
+						atmel,pins =
+							<AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PD0 periph B */
+							 AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PD31 periph B */
+					};
+				};
+			};
+
+			spi0: spi@fffa4000{
+				status = "okay";
+				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <13000000>;
+					reg = <0>;
+				};
+			};
+
+			usb2: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
+			adc0: adc@fffb0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			pwm0: pwm@fffb8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm_leds>;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
+		};
+
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <32>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <9>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <9000000>;
+						hactive = <480>;
+						vactive = <272>;
+						hback-porch = <1>;
+						hfront-porch = <1>;
+						vback-porch = <40>;
+						vfront-porch = <1>;
+						hsync-len = <45>;
+						vsync-len = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "bootstrap/uboot/kernel";
+							reg = <0x0 0x400000>;
+						};
+
+						rootfs@400000 {
+							label = "rootfs";
+							reg = <0x400000 0x3C00000>;
+						};
+
+						data@4000000 {
+							label = "data";
+							reg = <0x4000000 0xC000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
+					   &pioD 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		d6 {
+			label = "d6";
+			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d7 {
+			label = "d7";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
+			linux,code = <105>;
+		};
+
+		right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+
+		down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
+			linux,code = <108>;
+		};
+
+		enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
new file mode 100644
index 000000000..0785389f5
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9N12 SoC";
+	compatible = "atmel,at91sam9n12";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9n12-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
+
+			rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc>, <&slow_osc>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe07983 0x00000000  /* pioA */
+				       0x00040000 0x00047e0f 0x00000000  /* pioB */
+				       0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA1 periph A with pullup */
+							 AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA0 periph A */
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA6 periph A with pullup */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA5 periph A */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA8 periph A with pullup */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA7 periph A */
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC23 periph B with pullup */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC22 periph B */
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC25 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC9 periph C with pullup */
+							 AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC8 periph C */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA11 periph B with pullup */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA13 periph B with pullup */
+							 AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA14 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x4000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x4000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma 1 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			usb1: gadget@f803c000 {
+				compatible = "atmel,at91sam9260-udc";
+				reg = <0xf803c000 0x4000>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x00100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
new file mode 100644
index 000000000..2bc4e6e0a
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Hong Xu <hong.xu@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9n12.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9N12-EK";
+	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <16000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usb1 {
+					pinctrl_usb1_vbus_sense: usb1_vbus_sense {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PB16 gpio usb vbus sense, no pull up and deglitch */
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
+			usb1: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
+				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <1>;
+			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		enter {
+			label = "Enter";
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
new file mode 100644
index 000000000..36a42a9fe
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -0,0 +1,883 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9rl-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91sam9rl-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			usb0: gadget@fffd4000 {
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9rl-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
new file mode 100644
index 000000000..1590862f1
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: panel {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			rtc@fffffe00 {
+				status = "okay";
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ds1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		ds2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			wakeup-source;
+		};
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	i2c-gpio-1 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
new file mode 100644
index 000000000..0fe8802e1
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_usart3.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel,at91sam9x25", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
new file mode 100644
index 000000000..ad7c6b36f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x25.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
new file mode 100644
index 000000000..0bfa21f18
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
+#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel,at91sam9x35", "atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
new file mode 100644
index 000000000..66675c787
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
+#include "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&bl_reg {
+	status = "okay";
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&panel_reg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
new file mode 100644
index 000000000..4cdb05079
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -0,0 +1,999 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
+				clock-names = "ddrck";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: rstc@fffffe00 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: shdwc@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: sckc@fffffe50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "dma_clk";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA2 periph A */
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA3 periph A */
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA4 periph A */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC27 periph C */
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB2 periph B */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC8 periph C */
+							 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC16 periph C */
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;	/* PC17 periph C with pullup */
+					};
+				};
+
+				nand {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA16 periph A with pullup */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA15 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA18 periph A with pullup */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA19 periph A with pullup */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA20 periph A with pullup */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA13 periph B */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA12 periph B with pullup */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA11 periph B with pullup */
+					};
+
+					pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA2 periph B with pullup */
+							 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA3 periph B with pullup */
+							 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA4 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA24 periph B */
+							 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA25 periph B */
+							 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA27 periph B */
+							 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA28 periph B */
+							 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA29 periph B */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA11 periph A SPI0_MISO pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA12 periph A SPI0_MOSI pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA13 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA21 periph B SPI1_MISO pin */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA22 periph B SPI1_MOSI pin */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA23 periph B SPI1_SPCK pin */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A I2C0 clock */
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC0 periph C I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC1 periph C I2C1 clock */
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB4 periph B I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB5 periph B I2C2 clock */
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PA30 gpio multidrive I2C0 data */
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PA31 gpio multidrive I2C0 clock */
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PC0 gpio multidrive I2C1 data */
+							 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PC1 gpio multidrive I2C1 clock */
+					};
+				};
+
+				i2c_gpio2 {
+					pinctrl_i2c_gpio2: i2c_gpio2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE	/* PB4 gpio multidrive I2C2 data */
+							 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;	/* PB5 gpio multidrive I2C2 clock */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb1 {
+					pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+						atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+						atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+						atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+						atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+						atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+						atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+						atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <19>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+			};
+
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			mmc0: mmc@f0008000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0008000 0x600>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@f000c000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf000c000 0x600>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "mci_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8010000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8010000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x100>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8018000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				status = "disabled";
+			};
+
+			uart0: serial@f8040000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8040000 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8044000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8044000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			adc0: adc@f804c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xffff>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			spi0: spi@f0000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0000000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			usb2: gadget@f803c000 {
+				compatible = "atmel,at91sam9g45-udc";
+				reg = <0x00500000 0x80000
+				       0xf803c000 0x400>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			rtc: rtc@fffffeb0 {
+				compatible = "atmel,at91sam9x5-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		usb0: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb1: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
+			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
+			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
+			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
new file mode 100644
index 000000000..04ccb25d3
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			can0: can@f8000000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
+							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
+							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
new file mode 100644
index 000000000..4ce98f05d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D0, conflicts with LCDDAT0 */
+							AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D1, conflicts with LCDDAT1 */
+							AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D2, conflicts with LCDDAT2 */
+							AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D3, conflicts with LCDDAT3 */
+							AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D4, conflicts with LCDDAT4 */
+							AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D5, conflicts with LCDDAT5 */
+							AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D6, conflicts with LCDDAT6 */
+							AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D7, conflicts with LCDDAT7 */
+							AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_PCK, conflicts with LCDDAT12 */
+							AT91_PIOC 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_HSYNC, conflicts with LCDDAT14 */
+							AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_VSYNC, conflicts with LCDDAT13 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D8, conflicts with LCDDAT8 */
+							AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with LCDDAT9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* ISI_D10, conflicts with LCDDAT10 */
+							AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with LCDDAT11 */
+					};
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
new file mode 100644
index 000000000..f81c9d169
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	lcd {
+		pinctrl_lcd_base: lcd-base-0 {
+			atmel,pins =
+				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+		};
+
+		pinctrl_lcd_pwm: lcd-pwm-0 {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+		};
+
+		pinctrl_lcd_rgb444: lcd-rgb-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+		};
+
+		pinctrl_lcd_rgb565: lcd-rgb-1 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+		};
+
+		pinctrl_lcd_rgb666: lcd-rgb-2 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+		};
+
+		pinctrl_lcd_rgb888: lcd-rgb-3 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
new file mode 100644
index 000000000..222aa30f6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+					};
+
+					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB17 periph A */
+					};
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
new file mode 100644
index 000000000..26bf9b5de
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
+ * Ethernet interfaces.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC16 periph B */
+							 AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC18 periph B */
+							 AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC19 periph B */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC20 periph B */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC21 periph B */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC27 periph B */
+							 AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC28 periph B */
+							 AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC29 periph B */
+							 AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC30 periph B */
+							 AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC31 periph B */
+					};
+				};
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 000000000..098d3fef5
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		serial4 = &usart3;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC24 periph B */
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC26 periph B */
+					};
+				};
+			};
+
+			usart3: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
new file mode 100644
index 000000000..cdd37f672
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+/ {
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				1wire_cm {
+					pinctrl_1wire_cm: 1wire_cm-0 {
+						atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+					};
+				};
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand
+				     &pinctrl_ebi_data_0_7>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "u-boot";
+							reg = <0x40000 0xc0000>;
+						};
+
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						ubootenv@140000 {
+							label = "U-Boot Env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pb18 {
+			label = "pb18";
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pd21 {
+			label = "pd21";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	1wire_cm {
+		compatible = "w1-gpio";
+		gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+		linux,open-drain;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_1wire_cm>;
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000..a9278038a
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
new file mode 100644
index 000000000..6d1264de6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+#include "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	m25p80@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
new file mode 100644
index 000000000..f571f7777
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9xe.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@2ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x4000>;
+	};
+};
diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts
new file mode 100644
index 000000000..89e430392
--- /dev/null
+++ b/arch/arm/boot/dts/atlas6-evb.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFatlas6 Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/dts-v1/;
+
+/include/ "atlas6.dtsi"
+
+/ {
+	model = "CSR SiRFatlas6 Evaluation Board";
+	compatible = "sirf,atlas6-cb", "sirf,atlas6";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+			i2c0: i2c@b00e0000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				lcd@40 {
+					compatible = "sirf,lcd";
+					reg = <0x40>;
+				};
+			};
+
+		};
+		disp-iobg {
+			lcd@90010000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcd_24pins_a>;
+			};
+		};
+	};
+	display: display@0 {
+	    panels {
+		panel0: panel@0 {
+			panel-name = "Innolux TFT";
+			hactive = <800>;
+			vactive = <480>;
+			left_margin = <20>;
+			right_margin = <234>;
+			upper_margin = <3>;
+			lower_margin = <41>;
+			hsync_len = <3>;
+			vsync_len = <2>;
+			pixclock = <33264000>;
+			sync = <3>;
+			timing = <0x88>;
+			};
+	    };
+	};
+};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
new file mode 100644
index 000000000..8ac5d1524
--- /dev/null
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -0,0 +1,800 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFatlas6 SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/ {
+	compatible = "sirf,atlas6";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				600000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clks: clock-controller@88000000 {
+				compatible = "sirf,atlas6-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+				#clock-cells = <1>;
+			};
+
+			rstc: reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x2000>;
+				interrupts = <27>;
+				clocks = <&clks 5>;
+			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			lcd@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+				clocks = <&clks 34>;
+				display=<&display>;
+				/* later transfer to pwm */
+				bl-gpio = <&gpio 7 0>;
+				default-panel = <&panel0>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+				clocks = <&clks 35>;
+				resets = <&rstc 6>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx510";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		graphics2d-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			ble@a0000000 {
+				compatible = "sirf,atlas6-ble";
+				reg = <0xa0000000 0x2000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+				resets = <&rstc 1>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+				clocks = <&clks 9>;
+				resets = <&rstc 2>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+				clocks = <&clks 8>;
+				resets = <&rstc 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+				clocks = <&clks 11>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+				clocks = <&clks 26>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+				clocks = <&clks 27>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x1000>;
+				interrupts = <17>;
+				fifosize = <128>;
+				clocks = <&clks 13>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x1000>;
+				interrupts = <18>;
+				fifosize = <32>;
+				clocks = <&clks 14>;
+				dma-names = "no-rx", "no-tx";
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x1000>;
+				interrupts = <19>;
+				fifosize = <128>;
+				clocks = <&clks 15>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+				fifosize = <128>;
+				clocks = <&clks 28>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+				fifosize = <128>;
+				clocks = <&clks 29>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+				clocks = <&clks 24>;
+				#dma-cells = <1>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+				clocks = <&clks 25>;
+				#dma-cells = <1>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 19>;
+				resets = <&rstc 26>;
+				status = "disabled";
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 20>;
+				resets = <&rstc 27>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 17>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 18>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+				clocks = <&clks 16>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas6-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+				pwm4_pins_a: pwm4@0 {
+                                        pwm {
+                                                sirf,pins = "pwm4grp";
+                                                sirf,function = "pwm4";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
+                                        sdmmc2_nowp {
+                                                sirf,pins = "sdmmc2_nowpgrp";
+                                                sirf,function = "sdmmc2_nowp";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+				i2s_mclk_pins_a: i2s_mclk@0 {
+                                        i2s_mclk {
+                                                sirf,pins = "i2smclkgrp";
+                                                sirf,function = "i2s_mclk";
+                                        };
+                                };
+				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+                                        i2s_ext_clk_input {
+                                                sirf,pins = "i2s_ext_clk_inputgrp";
+                                                sirf,function = "i2s_ext_clk_input";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+				i2s_no_din_pins_a: i2s_no_din@0 {
+                                        i2s_no_din {
+                                                sirf,pins = "i2s_no_dingrp";
+                                                sirf,function = "i2s_no_din";
+                                        };
+                                };
+				i2s_6chn_pins_a: i2s_6chn@0 {
+                                        i2s_6chn {
+                                                sirf,pins = "i2s_6chngrp";
+                                                sirf,function = "i2s_6chn";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
+                                                sirf,function = "usp0_uart_nostreamctrl";
+                                        };
+                                };
+				usp0_only_utfs_pins_a: usp0@2 {
+					usp0 {
+						sirf,pins = "usp0_only_utfs_grp";
+						sirf,function = "usp0_only_utfs";
+					};
+				};
+				usp0_only_urfs_pins_a: usp0@3 {
+					usp0 {
+						sirf,pins = "usp0_only_urfs_grp";
+						sirf,function = "usp0_only_urfs";
+					};
+				};
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
+                                                sirf,function = "usp1_uart_nostreamctrl";
+                                        };
+                                };
+                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
+                                        usb0_upli_drvbus {
+                                                sirf,pins = "usb0_upli_drvbusgrp";
+                                                sirf,function = "usb0_upli_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
+                                        };
+                                };
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+				clocks = <&clks 21>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+				clocks = <&clks 22>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+				clocks = <&clks 23>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+					bus-width = <8>;
+					clocks = <&clks 36>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 36>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 37>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 37>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 38>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+				clocks = <&clks 40>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+				clocks = <&clks 41>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+				clocks = <&clks 7>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
new file mode 100644
index 000000000..e0515043d
--- /dev/null
+++ b/arch/arm/boot/dts/atlas7-evb.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFatlas7 Evaluation Board
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/dts-v1/;
+
+/include/ "atlas7.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "CSR SiRFatlas7 Evaluation Board";
+	compatible = "sirf,atlas7-cb", "sirf,atlas7";
+
+	chosen {
+		bootargs = "console=ttySiRF1,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vpp_reserved: vpp_mem@5e800000 {
+			compatible = "sirf,reserved-memory";
+			reg = <0x5e800000 0x800000>;
+		};
+
+		nanddisk_reserved: nanddisk@46000000 {
+			reg = <0x46000000 0x200000>;
+			no-map;
+		};
+	};
+
+
+	noc {
+		mediam {
+			nand@17050000 {
+				memory-region = <&nanddisk_reserved>;
+			};
+		};
+
+		gnssm {
+			spi1: spi@18200000 {
+				status = "okay";
+				spiflash: macronix@0{
+					status = "okay";
+					compatible = "macronix,mx25l6405d";
+					reg = <0>;
+					spi-max-frequency = <37500000>;
+					spi-cpha;
+					spi-cpol;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partitions@0 {
+						label = "myspiboot";
+						reg = <0x0 0x800000>;
+					};
+				};
+			};
+		};
+
+		btm {
+			uart6: uart@11000000 {
+				status = "okay";
+				uart-has-rtscts;
+			};
+		};
+
+		disp-iobg {
+			vpp@13110000 {
+				memory-region = <&vpp_reserved>;
+			};
+		};
+
+		display0: display@0 {
+			compatible = "lvds-panel";
+			source = "lvds.0";
+
+			bl-gpios = <&gpio_1 63 0>;
+			data-lines  = <24>;
+
+			display-timings {
+				native-mode = <&timing0>;
+				timing0: timing0 {
+					clock-frequency = <60000000>;
+					hactive = <1024>;
+					vactive = <600>;
+					hfront-porch = <220>;
+					hback-porch = <100>;
+					hsync-len = <1>;
+					vback-porch = <10>;
+					vfront-porch = <25>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rearview_key {
+				label = "rearview key";
+				linux,code = <KEY_CAMERA>;
+				gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
+				debounce-interval = <100>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
new file mode 100644
index 000000000..99c9d9d92
--- /dev/null
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -0,0 +1,1955 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFatlas7 SoC
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/ {
+	compatible = "sirf,atlas7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial9 = &usp2;
+		spi1 = &spi1;
+		spi2 = &usp1;
+		spi3 = &usp2;
+		spi4 = &usp3;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		xinw {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xinw";
+		};
+		xin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			clock-output-names = "xin";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 29 4>, <0 82 4>;
+	};
+
+	noc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x10000000 0x10000000 0xc0000000>;
+
+		gic: interrupt-controller@10301000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x10301000 0x1000>,
+			     <0x10302000 0x0100>;
+		};
+
+		pmu_regulator: pmu_regulator@10E30020 {
+			compatible = "sirf,atlas7-pmu-ldo";
+			reg = <0x10E30020 0x4>;
+			ldo: ldo {
+				regulator-name = "ldo";
+			};
+		};
+
+		atlas7_codec: atlas7_codec@10E30000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-codec";
+			reg = <0x10E30000 0x400>;
+			clocks = <&car 62>;
+			ldo-supply = <&ldo>;
+		};
+
+		atlas7_iacc: atlas7_iacc@10D01000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-iacc";
+			reg = <0x10D01000 0x100>;
+			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
+				<&dmac3 3>, <&dmac3 9>;
+			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
+			clocks = <&car 62>;
+		};
+
+		ipc@13240000 {
+			compatible = "sirf,atlas7-ipc";
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			hwspinlock {
+				compatible = "sirf,hwspinlock";
+				reg = <0x13240000 0x00010000>;
+
+				num-spinlocks = <30>;
+			};
+
+			ns_m3_rproc@0 {
+				compatible = "sirf,ns2m30-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 123 0>;
+			};
+
+			ns_m3_rproc@1 {
+				compatible = "sirf,ns2m31-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 126 0>;
+			};
+
+			ns_kal_rproc@0 {
+				compatible = "sirf,ns2kal0-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 124 0>;
+			};
+
+			ns_kal_rproc@1 {
+				compatible = "sirf,ns2kal1-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 127 0>;
+			};
+		};
+
+		pinctrl: ioc@18880000 {
+			compatible = "sirf,atlas7-ioc";
+			reg = <0x18880000 0x1000>,
+				<0x10E40000 0x1000>;
+
+			audio_ac97_pmx: audio_ac97@0 {
+				audio_ac97 {
+					groups = "audio_ac97_grp";
+					function = "audio_ac97";
+				};
+			};
+
+			audio_func_dbg_pmx: audio_func_dbg@0 {
+				audio_func_dbg {
+					groups = "audio_func_dbg_grp";
+					function = "audio_func_dbg";
+				};
+			};
+
+			audio_i2s_pmx: audio_i2s@0 {
+				audio_i2s {
+					groups = "audio_i2s_grp";
+					function = "audio_i2s";
+				};
+			};
+
+			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
+				audio_i2s_2ch {
+					groups = "audio_i2s_2ch_grp";
+					function = "audio_i2s_2ch";
+				};
+			};
+
+			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
+				audio_i2s_extclk {
+					groups = "audio_i2s_extclk_grp";
+					function = "audio_i2s_extclk";
+				};
+			};
+
+			audio_uart0_pmx: audio_uart0@0 {
+				audio_uart0 {
+					groups = "audio_uart0_grp";
+					function = "audio_uart0";
+				};
+			};
+
+			audio_uart1_pmx: audio_uart1@0 {
+				audio_uart1 {
+					groups = "audio_uart1_grp";
+					function = "audio_uart1";
+				};
+			};
+
+			audio_uart2_pmx0: audio_uart2@0 {
+				audio_uart2_0 {
+					groups = "audio_uart2_grp0";
+					function = "audio_uart2_m0";
+				};
+			};
+
+			audio_uart2_pmx1: audio_uart2@1 {
+				audio_uart2_1 {
+					groups = "audio_uart2_grp1";
+					function = "audio_uart2_m1";
+				};
+			};
+
+			c_can_trnsvr_pmx: c_can_trnsvr@0 {
+				c_can_trnsvr {
+					groups = "c_can_trnsvr_grp";
+					function = "c_can_trnsvr";
+				};
+			};
+
+			c0_can_pmx0: c0_can@0 {
+				c0_can_0 {
+					groups = "c0_can_grp0";
+					function = "c0_can_m0";
+				};
+			};
+
+			c0_can_pmx1: c0_can@1 {
+				c0_can_1 {
+					groups = "c0_can_grp1";
+					function = "c0_can_m1";
+				};
+			};
+
+			c1_can_pmx0: c1_can@0 {
+				c1_can_0 {
+					groups = "c1_can_grp0";
+					function = "c1_can_m0";
+				};
+			};
+
+			c1_can_pmx1: c1_can@1 {
+				c1_can_1 {
+					groups = "c1_can_grp1";
+					function = "c1_can_m1";
+				};
+			};
+
+			c1_can_pmx2: c1_can@2 {
+				c1_can_2 {
+					groups = "c1_can_grp2";
+					function = "c1_can_m2";
+				};
+			};
+
+			ca_audio_lpc_pmx: ca_audio_lpc@0 {
+				ca_audio_lpc {
+					groups = "ca_audio_lpc_grp";
+					function = "ca_audio_lpc";
+				};
+			};
+
+			ca_bt_lpc_pmx: ca_bt_lpc@0 {
+				ca_bt_lpc {
+					groups = "ca_bt_lpc_grp";
+					function = "ca_bt_lpc";
+				};
+			};
+
+			ca_coex_pmx: ca_coex@0 {
+				ca_coex {
+					groups = "ca_coex_grp";
+					function = "ca_coex";
+				};
+			};
+
+			ca_curator_lpc_pmx: ca_curator_lpc@0 {
+				ca_curator_lpc {
+					groups = "ca_curator_lpc_grp";
+					function = "ca_curator_lpc";
+				};
+			};
+
+			ca_pcm_debug_pmx: ca_pcm_debug@0 {
+				ca_pcm_debug {
+					groups = "ca_pcm_debug_grp";
+					function = "ca_pcm_debug";
+				};
+			};
+
+			ca_pio_pmx: ca_pio@0 {
+				ca_pio {
+					groups = "ca_pio_grp";
+					function = "ca_pio";
+				};
+			};
+
+			ca_sdio_debug_pmx: ca_sdio_debug@0 {
+				ca_sdio_debug {
+					groups = "ca_sdio_debug_grp";
+					function = "ca_sdio_debug";
+				};
+			};
+
+			ca_spi_pmx: ca_spi@0 {
+				ca_spi {
+					groups = "ca_spi_grp";
+					function = "ca_spi";
+				};
+			};
+
+			ca_trb_pmx: ca_trb@0 {
+				ca_trb {
+					groups = "ca_trb_grp";
+					function = "ca_trb";
+				};
+			};
+
+			ca_uart_debug_pmx: ca_uart_debug@0 {
+				ca_uart_debug {
+					groups = "ca_uart_debug_grp";
+					function = "ca_uart_debug";
+				};
+			};
+
+			clkc_pmx0: clkc@0 {
+				clkc_0 {
+					groups = "clkc_grp0";
+					function = "clkc_m0";
+				};
+			};
+
+			clkc_pmx1: clkc@1 {
+				clkc_1 {
+					groups = "clkc_grp1";
+					function = "clkc_m1";
+				};
+			};
+
+			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
+				gn_gnss_i2c {
+					groups = "gn_gnss_i2c_grp";
+					function = "gn_gnss_i2c";
+				};
+			};
+
+			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
+				gn_gnss_uart_nopause {
+					groups = "gn_gnss_uart_nopause_grp";
+					function = "gn_gnss_uart_nopause";
+				};
+			};
+
+			gn_gnss_uart_pmx: gn_gnss_uart@0 {
+				gn_gnss_uart {
+					groups = "gn_gnss_uart_grp";
+					function = "gn_gnss_uart";
+				};
+			};
+
+			gn_trg_spi_pmx0: gn_trg_spi@0 {
+				gn_trg_spi_0 {
+					groups = "gn_trg_spi_grp0";
+					function = "gn_trg_spi_m0";
+				};
+			};
+
+			gn_trg_spi_pmx1: gn_trg_spi@1 {
+				gn_trg_spi_1 {
+					groups = "gn_trg_spi_grp1";
+					function = "gn_trg_spi_m1";
+				};
+			};
+
+			cvbs_dbg_pmx: cvbs_dbg@0 {
+				cvbs_dbg {
+					groups = "cvbs_dbg_grp";
+					function = "cvbs_dbg";
+				};
+			};
+
+			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
+				cvbs_dbg_test_0 {
+					groups = "cvbs_dbg_test_grp0";
+					function = "cvbs_dbg_test_m0";
+				};
+			};
+
+			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
+				cvbs_dbg_test_1 {
+					groups = "cvbs_dbg_test_grp1";
+					function = "cvbs_dbg_test_m1";
+				};
+			};
+
+			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
+				cvbs_dbg_test_2 {
+					groups = "cvbs_dbg_test_grp2";
+					function = "cvbs_dbg_test_m2";
+				};
+			};
+
+			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
+				cvbs_dbg_test_3 {
+					groups = "cvbs_dbg_test_grp3";
+					function = "cvbs_dbg_test_m3";
+				};
+			};
+
+			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
+				cvbs_dbg_test_4 {
+					groups = "cvbs_dbg_test_grp4";
+					function = "cvbs_dbg_test_m4";
+				};
+			};
+
+			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
+				cvbs_dbg_test_5 {
+					groups = "cvbs_dbg_test_grp5";
+					function = "cvbs_dbg_test_m5";
+				};
+			};
+
+			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
+				cvbs_dbg_test_6 {
+					groups = "cvbs_dbg_test_grp6";
+					function = "cvbs_dbg_test_m6";
+				};
+			};
+
+			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
+				cvbs_dbg_test_7 {
+					groups = "cvbs_dbg_test_grp7";
+					function = "cvbs_dbg_test_m7";
+				};
+			};
+
+			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
+				cvbs_dbg_test_8 {
+					groups = "cvbs_dbg_test_grp8";
+					function = "cvbs_dbg_test_m8";
+				};
+			};
+
+			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
+				cvbs_dbg_test_9 {
+					groups = "cvbs_dbg_test_grp9";
+					function = "cvbs_dbg_test_m9";
+				};
+			};
+
+			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
+				cvbs_dbg_test_10 {
+					groups = "cvbs_dbg_test_grp10";
+					function = "cvbs_dbg_test_m10";
+				};
+			};
+
+			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
+				cvbs_dbg_test_11 {
+					groups = "cvbs_dbg_test_grp11";
+					function = "cvbs_dbg_test_m11";
+				};
+			};
+
+			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
+				cvbs_dbg_test_12 {
+					groups = "cvbs_dbg_test_grp12";
+					function = "cvbs_dbg_test_m12";
+				};
+			};
+
+			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
+				cvbs_dbg_test_13 {
+					groups = "cvbs_dbg_test_grp13";
+					function = "cvbs_dbg_test_m13";
+				};
+			};
+
+			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
+				cvbs_dbg_test_14 {
+					groups = "cvbs_dbg_test_grp14";
+					function = "cvbs_dbg_test_m14";
+				};
+			};
+
+			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
+				cvbs_dbg_test_15 {
+					groups = "cvbs_dbg_test_grp15";
+					function = "cvbs_dbg_test_m15";
+				};
+			};
+
+			gn_gnss_power_pmx: gn_gnss_power@0 {
+				gn_gnss_power {
+					groups = "gn_gnss_power_grp";
+					function = "gn_gnss_power";
+				};
+			};
+
+			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
+				gn_gnss_sw_status {
+					groups = "gn_gnss_sw_status_grp";
+					function = "gn_gnss_sw_status";
+				};
+			};
+
+			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
+				gn_gnss_eclk {
+					groups = "gn_gnss_eclk_grp";
+					function = "gn_gnss_eclk";
+				};
+			};
+
+			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
+				gn_gnss_irq1_0 {
+					groups = "gn_gnss_irq1_grp0";
+					function = "gn_gnss_irq1_m0";
+				};
+			};
+
+			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
+				gn_gnss_irq2_0 {
+					groups = "gn_gnss_irq2_grp0";
+					function = "gn_gnss_irq2_m0";
+				};
+			};
+
+			gn_gnss_tm_pmx: gn_gnss_tm@0 {
+				gn_gnss_tm {
+					groups = "gn_gnss_tm_grp";
+					function = "gn_gnss_tm";
+				};
+			};
+
+			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
+				gn_gnss_tsync {
+					groups = "gn_gnss_tsync_grp";
+					function = "gn_gnss_tsync";
+				};
+			};
+
+			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
+				gn_io_gnsssys_sw_cfg {
+					groups = "gn_io_gnsssys_sw_cfg_grp";
+					function = "gn_io_gnsssys_sw_cfg";
+				};
+			};
+
+			gn_trg_pmx0: gn_trg@0 {
+				gn_trg_0 {
+					groups = "gn_trg_grp0";
+					function = "gn_trg_m0";
+				};
+			};
+
+			gn_trg_pmx1: gn_trg@1 {
+				gn_trg_1 {
+					groups = "gn_trg_grp1";
+					function = "gn_trg_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
+				gn_trg_shutdown_0 {
+					groups = "gn_trg_shutdown_grp0";
+					function = "gn_trg_shutdown_m0";
+				};
+			};
+
+			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
+				gn_trg_shutdown_1 {
+					groups = "gn_trg_shutdown_grp1";
+					function = "gn_trg_shutdown_m1";
+				};
+			};
+
+			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
+				gn_trg_shutdown_2 {
+					groups = "gn_trg_shutdown_grp2";
+					function = "gn_trg_shutdown_m2";
+				};
+			};
+
+			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
+				gn_trg_shutdown_3 {
+					groups = "gn_trg_shutdown_grp3";
+					function = "gn_trg_shutdown_m3";
+				};
+			};
+
+			i2c0_pmx: i2c0@0 {
+				i2c0 {
+					groups = "i2c0_grp";
+					function = "i2c0";
+				};
+			};
+
+			i2c1_pmx: i2c1@0 {
+				i2c1 {
+					groups = "i2c1_grp";
+					function = "i2c1";
+				};
+			};
+
+			jtag_pmx0: jtag@0 {
+				jtag_0 {
+					groups = "jtag_grp0";
+					function = "jtag_m0";
+				};
+			};
+
+			ks_kas_spi_pmx0: ks_kas_spi@0 {
+				ks_kas_spi_0 {
+					groups = "ks_kas_spi_grp0";
+					function = "ks_kas_spi_m0";
+				};
+			};
+
+			ld_ldd_pmx: ld_ldd@0 {
+				ld_ldd {
+					groups = "ld_ldd_grp";
+					function = "ld_ldd";
+				};
+			};
+
+			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
+				ld_ldd_16bit {
+					groups = "ld_ldd_16bit_grp";
+					function = "ld_ldd_16bit";
+				};
+			};
+
+			ld_ldd_fck_pmx: ld_ldd_fck@0 {
+				ld_ldd_fck {
+					groups = "ld_ldd_fck_grp";
+					function = "ld_ldd_fck";
+				};
+			};
+
+			ld_ldd_lck_pmx: ld_ldd_lck@0 {
+				ld_ldd_lck {
+					groups = "ld_ldd_lck_grp";
+					function = "ld_ldd_lck";
+				};
+			};
+
+			lr_lcdrom_pmx: lr_lcdrom@0 {
+				lr_lcdrom {
+					groups = "lr_lcdrom_grp";
+					function = "lr_lcdrom";
+				};
+			};
+
+			lvds_analog_pmx: lvds_analog@0 {
+				lvds_analog {
+					groups = "lvds_analog_grp";
+					function = "lvds_analog";
+				};
+			};
+
+			nd_df_pmx: nd_df@0 {
+				nd_df {
+					groups = "nd_df_grp";
+					function = "nd_df";
+				};
+			};
+
+			nd_df_nowp_pmx: nd_df_nowp@0 {
+				nd_df_nowp {
+					groups = "nd_df_nowp_grp";
+					function = "nd_df_nowp";
+				};
+			};
+
+			ps_pmx: ps@0 {
+				ps {
+					groups = "ps_grp";
+					function = "ps";
+				};
+			};
+
+			pwc_core_on_pmx: pwc_core_on@0 {
+				pwc_core_on {
+					groups = "pwc_core_on_grp";
+					function = "pwc_core_on";
+				};
+			};
+
+			pwc_ext_on_pmx: pwc_ext_on@0 {
+				pwc_ext_on {
+					groups = "pwc_ext_on_grp";
+					function = "pwc_ext_on";
+				};
+			};
+
+			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
+				pwc_gpio3_clk {
+					groups = "pwc_gpio3_clk_grp";
+					function = "pwc_gpio3_clk";
+				};
+			};
+
+			pwc_io_on_pmx: pwc_io_on@0 {
+				pwc_io_on {
+					groups = "pwc_io_on_grp";
+					function = "pwc_io_on";
+				};
+			};
+
+			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
+				pwc_lowbatt_b_0 {
+					groups = "pwc_lowbatt_b_grp0";
+					function = "pwc_lowbatt_b_m0";
+				};
+			};
+
+			pwc_mem_on_pmx: pwc_mem_on@0 {
+				pwc_mem_on {
+					groups = "pwc_mem_on_grp";
+					function = "pwc_mem_on";
+				};
+			};
+
+			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
+				pwc_on_key_b_0 {
+					groups = "pwc_on_key_b_grp0";
+					function = "pwc_on_key_b_m0";
+				};
+			};
+
+			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
+				pwc_wakeup_src0 {
+					groups = "pwc_wakeup_src0_grp";
+					function = "pwc_wakeup_src0";
+				};
+			};
+
+			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
+				pwc_wakeup_src1 {
+					groups = "pwc_wakeup_src1_grp";
+					function = "pwc_wakeup_src1";
+				};
+			};
+
+			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
+				pwc_wakeup_src2 {
+					groups = "pwc_wakeup_src2_grp";
+					function = "pwc_wakeup_src2";
+				};
+			};
+
+			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
+				pwc_wakeup_src3 {
+					groups = "pwc_wakeup_src3_grp";
+					function = "pwc_wakeup_src3";
+				};
+			};
+
+			pw_cko0_pmx0: pw_cko0@0 {
+				pw_cko0_0 {
+					groups = "pw_cko0_grp0";
+					function = "pw_cko0_m0";
+				};
+			};
+
+			pw_cko0_pmx1: pw_cko0@1 {
+				pw_cko0_1 {
+					groups = "pw_cko0_grp1";
+					function = "pw_cko0_m1";
+				};
+			};
+
+			pw_cko0_pmx2: pw_cko0@2 {
+				pw_cko0_2 {
+					groups = "pw_cko0_grp2";
+					function = "pw_cko0_m2";
+				};
+			};
+
+			pw_cko1_pmx0: pw_cko1@0 {
+				pw_cko1_0 {
+					groups = "pw_cko1_grp0";
+					function = "pw_cko1_m0";
+				};
+			};
+
+			pw_cko1_pmx1: pw_cko1@1 {
+				pw_cko1_1 {
+					groups = "pw_cko1_grp1";
+					function = "pw_cko1_m1";
+				};
+			};
+
+			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
+				pw_i2s01_clk_0 {
+					groups = "pw_i2s01_clk_grp0";
+					function = "pw_i2s01_clk_m0";
+				};
+			};
+
+			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
+				pw_i2s01_clk_1 {
+					groups = "pw_i2s01_clk_grp1";
+					function = "pw_i2s01_clk_m1";
+				};
+			};
+
+			pw_pwm0_pmx: pw_pwm0@0 {
+				pw_pwm0 {
+					groups = "pw_pwm0_grp";
+					function = "pw_pwm0";
+				};
+			};
+
+			pw_pwm1_pmx: pw_pwm1@0 {
+				pw_pwm1 {
+					groups = "pw_pwm1_grp";
+					function = "pw_pwm1";
+				};
+			};
+
+			pw_pwm2_pmx0: pw_pwm2@0 {
+				pw_pwm2_0 {
+					groups = "pw_pwm2_grp0";
+					function = "pw_pwm2_m0";
+				};
+			};
+
+			pw_pwm2_pmx1: pw_pwm2@1 {
+				pw_pwm2_1 {
+					groups = "pw_pwm2_grp1";
+					function = "pw_pwm2_m1";
+				};
+			};
+
+			pw_pwm3_pmx0: pw_pwm3@0 {
+				pw_pwm3_0 {
+					groups = "pw_pwm3_grp0";
+					function = "pw_pwm3_m0";
+				};
+			};
+
+			pw_pwm3_pmx1: pw_pwm3@1 {
+				pw_pwm3_1 {
+					groups = "pw_pwm3_grp1";
+					function = "pw_pwm3_m1";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
+				pw_pwm_cpu_vol_0 {
+					groups = "pw_pwm_cpu_vol_grp0";
+					function = "pw_pwm_cpu_vol_m0";
+				};
+			};
+
+			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
+				pw_pwm_cpu_vol_1 {
+					groups = "pw_pwm_cpu_vol_grp1";
+					function = "pw_pwm_cpu_vol_m1";
+				};
+			};
+
+			pw_backlight_pmx0: pw_backlight@0 {
+				pw_backlight_0 {
+					groups = "pw_backlight_grp0";
+					function = "pw_backlight_m0";
+				};
+			};
+
+			pw_backlight_pmx1: pw_backlight@1 {
+				pw_backlight_1 {
+					groups = "pw_backlight_grp1";
+					function = "pw_backlight_m1";
+				};
+			};
+
+			rg_eth_mac_pmx: rg_eth_mac@0 {
+				rg_eth_mac {
+					groups = "rg_eth_mac_grp";
+					function = "rg_eth_mac";
+				};
+			};
+
+			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
+				rg_gmac_phy_intr_n {
+					groups = "rg_gmac_phy_intr_n_grp";
+					function = "rg_gmac_phy_intr_n";
+				};
+			};
+
+			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
+				rg_rgmii_mac {
+					groups = "rg_rgmii_mac_grp";
+					function = "rg_rgmii_mac";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
+				rg_rgmii_phy_ref_clk_0 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp0";
+					function =
+						"rg_rgmii_phy_ref_clk_m0";
+				};
+			};
+
+			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
+				rg_rgmii_phy_ref_clk_1 {
+					groups =
+						"rg_rgmii_phy_ref_clk_grp1";
+					function =
+						"rg_rgmii_phy_ref_clk_m1";
+				};
+			};
+
+			sd0_pmx: sd0@0 {
+				sd0 {
+					groups = "sd0_grp";
+					function = "sd0";
+				};
+			};
+
+			sd0_4bit_pmx: sd0_4bit@0 {
+				sd0_4bit {
+					groups = "sd0_4bit_grp";
+					function = "sd0_4bit";
+				};
+			};
+
+			sd1_pmx: sd1@0 {
+				sd1 {
+					groups = "sd1_grp";
+					function = "sd1";
+				};
+			};
+
+			sd1_4bit_pmx0: sd1_4bit@0 {
+				sd1_4bit_0 {
+					groups = "sd1_4bit_grp0";
+					function = "sd1_4bit_m0";
+				};
+			};
+
+			sd1_4bit_pmx1: sd1_4bit@1 {
+				sd1_4bit_1 {
+					groups = "sd1_4bit_grp1";
+					function = "sd1_4bit_m1";
+				};
+			};
+
+			sd2_pmx0: sd2@0 {
+				sd2_0 {
+					groups = "sd2_grp0";
+					function = "sd2_m0";
+				};
+			};
+
+			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
+				sd2_no_cdb_0 {
+					groups = "sd2_no_cdb_grp0";
+					function = "sd2_no_cdb_m0";
+				};
+			};
+
+			sd3_pmx: sd3@0 {
+				sd3 {
+					groups = "sd3_grp";
+					function = "sd3";
+				};
+			};
+
+			sd5_pmx: sd5@0 {
+				sd5 {
+					groups = "sd5_grp";
+					function = "sd5";
+				};
+			};
+
+			sd6_pmx0: sd6@0 {
+				sd6_0 {
+					groups = "sd6_grp0";
+					function = "sd6_m0";
+				};
+			};
+
+			sd6_pmx1: sd6@1 {
+				sd6_1 {
+					groups = "sd6_grp1";
+					function = "sd6_m1";
+				};
+			};
+
+			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
+				sp0_ext_ldo_on {
+					groups = "sp0_ext_ldo_on_grp";
+					function = "sp0_ext_ldo_on";
+				};
+			};
+
+			sp0_qspi_pmx: sp0_qspi@0 {
+				sp0_qspi {
+					groups = "sp0_qspi_grp";
+					function = "sp0_qspi";
+				};
+			};
+
+			sp1_spi_pmx: sp1_spi@0 {
+				sp1_spi {
+					groups = "sp1_spi_grp";
+					function = "sp1_spi";
+				};
+			};
+
+			tpiu_trace_pmx: tpiu_trace@0 {
+				tpiu_trace {
+					groups = "tpiu_trace_grp";
+					function = "tpiu_trace";
+				};
+			};
+
+			uart0_pmx: uart0@0 {
+				uart0 {
+					groups = "uart0_grp";
+					function = "uart0";
+				};
+			};
+
+			uart0_nopause_pmx: uart0_nopause@0 {
+				uart0_nopause {
+					groups = "uart0_nopause_grp";
+					function = "uart0_nopause";
+				};
+			};
+
+			uart1_pmx: uart1@0 {
+				uart1 {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			uart2_pmx: uart2@0 {
+				uart2 {
+					groups = "uart2_grp";
+					function = "uart2";
+				};
+			};
+
+			uart3_pmx0: uart3@0 {
+				uart3_0 {
+					groups = "uart3_grp0";
+					function = "uart3_m0";
+				};
+			};
+
+			uart3_pmx1: uart3@1 {
+				uart3_1 {
+					groups = "uart3_grp1";
+					function = "uart3_m1";
+				};
+			};
+
+			uart3_pmx2: uart3@2 {
+				uart3_2 {
+					groups = "uart3_grp2";
+					function = "uart3_m2";
+				};
+			};
+
+			uart3_pmx3: uart3@3 {
+				uart3_3 {
+					groups = "uart3_grp3";
+					function = "uart3_m3";
+				};
+			};
+
+			uart3_nopause_pmx0: uart3_nopause@0 {
+				uart3_nopause_0 {
+					groups = "uart3_nopause_grp0";
+					function = "uart3_nopause_m0";
+				};
+			};
+
+			uart3_nopause_pmx1: uart3_nopause@1 {
+				uart3_nopause_1 {
+					groups = "uart3_nopause_grp1";
+					function = "uart3_nopause_m1";
+				};
+			};
+
+			uart4_pmx0: uart4@0 {
+				uart4_0 {
+					groups = "uart4_grp0";
+					function = "uart4_m0";
+				};
+			};
+
+			uart4_pmx1: uart4@1 {
+				uart4_1 {
+					groups = "uart4_grp1";
+					function = "uart4_m1";
+				};
+			};
+
+			uart4_pmx2: uart4@2 {
+				uart4_2 {
+					groups = "uart4_grp2";
+					function = "uart4_m2";
+				};
+			};
+
+			uart4_nopause_pmx: uart4_nopause@0 {
+				uart4_nopause {
+					groups = "uart4_nopause_grp";
+					function = "uart4_nopause";
+				};
+			};
+
+			usb0_drvvbus_pmx: usb0_drvvbus@0 {
+				usb0_drvvbus {
+					groups = "usb0_drvvbus_grp";
+					function = "usb0_drvvbus";
+				};
+			};
+
+			usb1_drvvbus_pmx: usb1_drvvbus@0 {
+				usb1_drvvbus {
+					groups = "usb1_drvvbus_grp";
+					function = "usb1_drvvbus";
+				};
+			};
+
+			visbus_dout_pmx: visbus_dout@0 {
+				visbus_dout {
+					groups = "visbus_dout_grp";
+					function = "visbus_dout";
+				};
+			};
+
+			vi_vip1_pmx: vi_vip1@0 {
+				vi_vip1 {
+					groups = "vi_vip1_grp";
+					function = "vi_vip1";
+				};
+			};
+
+			vi_vip1_ext_pmx: vi_vip1_ext@0 {
+				vi_vip1_ext {
+					groups = "vi_vip1_ext_grp";
+					function = "vi_vip1_ext";
+				};
+			};
+
+			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
+				vi_vip1_low8bit {
+					groups = "vi_vip1_low8bit_grp";
+					function = "vi_vip1_low8bit";
+				};
+			};
+
+			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
+				vi_vip1_high8bit {
+					groups = "vi_vip1_high8bit_grp";
+					function = "vi_vip1_high8bit";
+				};
+			};
+		};
+
+		pmipc {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			pmipc@0x13240000 {
+				compatible = "sirf,atlas7-pmipc";
+				reg = <0x13240000 0x00010000>;
+			};
+		};
+
+		dramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10830000 0x10830000 0x18000>;
+			dramfw@10820000 {
+				compatible = "sirf,nocfw-dramfw";
+				reg = <0x10830000 0x18000>;
+			};
+		};
+
+		spramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10250000 0x10250000 0x3000>;
+			spramfw@10820000 {
+				compatible = "sirf,nocfw-spramfw";
+				reg = <0x10250000 0x3000>;
+			};
+		};
+
+		cpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10200000 0x10200000 0x3000>;
+			cpum@10200000 {
+				compatible = "sirf,nocfw-cpum";
+				reg = <0x10200000 0x3000>;
+			};
+		};
+
+		cgum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18641000 0x18641000 0x3000>,
+					 <0x18620000 0x18620000 0x1000>,
+					<0x18630000 0x18630000 0x10000>;
+
+			cgum@18641000 {
+				compatible = "sirf,nocfw-cgum";
+				reg = <0x18641000 0x3000>;
+			};
+
+			car: clock-controller@18620000 {
+				compatible = "sirf,atlas7-car";
+				reg = <0x18620000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+			pwm: pwm@18630000 {
+				compatible = "sirf,prima2-pwm";
+				#pwm-cells = <2>;
+				reg = <0x18630000 0x10000>;
+				clocks = <&car 138>, <&car 139>, <&car 237>,
+					<&car 240>,  <&car 140>, <&car 246>;
+				clock-names = "pwmc", "sigsrc0", "sigsrc1",
+					"sigsrc2", "sigsrc3", "sigsrc4";
+			};
+		};
+
+		gnssm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18000000 0x18000000 0x0000ffff>,
+				<0x18010000 0x18010000 0x1000>,
+				<0x18020000 0x18020000 0x1000>,
+				<0x18030000 0x18030000 0x1000>,
+				<0x18040000 0x18040000 0x1000>,
+				<0x18050000 0x18050000 0x1000>,
+				<0x18060000 0x18060000 0x1000>,
+				<0x180b0000 0x180b0000 0x4000>,
+				<0x18100000 0x18100000 0x3000>,
+				<0x18250000 0x18250000 0x10000>,
+				<0x18200000 0x18200000 0x1000>;
+
+			dmac0: dma-controller@18000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x18000000 0x1000>;
+				interrupts = <0 12 0>;
+				clocks = <&car 89>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			gnssmfw@0x18100000 {
+				compatible = "sirf,nocfw-gnssm";
+				reg = <0x18100000 0x3000>;
+			};
+
+			uart0: uart@18010000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18010000 0x1000>;
+				interrupts = <0 17 0>;
+				clocks = <&car 90>;
+				fifosize = <128>;
+				dmas = <&dmac0 3>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@18020000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18020000 0x1000>;
+				interrupts = <0 18 0>;
+				clocks = <&car 88>;
+				fifosize = <32>;
+			};
+
+			uart2: uart@18030000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18030000 0x1000>;
+				interrupts = <0 19 0>;
+				clocks = <&car 91>;
+				fifosize = <128>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart3: uart@18040000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18040000 0x1000>;
+				interrupts = <0 66 0>;
+				clocks = <&car 92>;
+				fifosize = <128>;
+				dmas = <&dmac0 4>, <&dmac0 5>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart4: uart@18050000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18050000 0x1000>;
+				interrupts = <0 69 0>;
+				clocks = <&car 93>;
+				fifosize = <128>;
+				dmas = <&dmac0 0>, <&dmac0 1>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart5: uart@18060000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18060000 0x1000>;
+				interrupts = <0 71 0>;
+				clocks = <&car 94>;
+				fifosize = <128>;
+				dmas = <&dmac0 8>, <&dmac0 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			gmac: eth@180b0000 {
+				compatible = "snps, dwc-eth-qos";
+				reg = <0x180b0000 0x4000>;
+				interrupts = <0 59 0>, <0 70 0>;
+				interrupt-names = "macirq", "macpmt";
+				clocks = <&car 39>, <&car 45>,
+				       <&car 86>, <&car 87>;
+				clock-names = "gnssm_rgmii", "gnssm_gmac",
+					"rgmii", "gmac";
+				local-mac-address = [00 00 00 00 00 00];
+				phy-mode = "rgmii";
+			};
+			dspub@18250000 {
+				compatible = "dx,cc44p";
+				reg = <0x18250000 0x10000>;
+				interrupts = <0 27 0>;
+			};
+
+			spi1: spi@18200000 {
+				compatible = "sirf,prima2-spi";
+				reg = <0x18200000 0x1000>;
+				interrupts = <0 16 0>;
+				clocks = <&car 95>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmac0 12>, <&dmac0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+
+		gpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13000000 0x13000000 0x3000>,
+				<0x13010000 0x13010000 0x1400>,
+				<0x13010800 0x13010800 0x100>,
+				<0x13011000 0x13011000 0x100>;
+			gpum@0x13000000 {
+				compatible = "sirf,nocfw-gpum";
+				reg = <0x13000000 0x3000>;
+			};
+			dmacsdrr: dma-controller@13010800 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13010800 0x100>;
+				interrupts = <0 8 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			dmacsdrw: dma-controller@13011000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-dmac-v2";
+				reg = <0x13011000 0x100>;
+				interrupts = <0 9 0>;
+				clocks = <&car 127>;
+				#dma-cells = <1>;
+				#dma-channels = <1>;
+			};
+			sdr@0x13010000 {
+				compatible = "sirf,atlas7-sdr";
+				reg = <0x13010000 0x1400>;
+				interrupts = <0 7 0>,
+					   <0 8 0>,
+					   <0 9 0>;
+				clocks = <&car 127>;
+				dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		mediam {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x15000000 0x15000000 0x00600000>,
+				<0x16000000 0x16000000 0x00200000>,
+				<0x17000000 0x17000000 0x10000>,
+				<0x17020000 0x17020000 0x1000>,
+				<0x17030000 0x17030000 0x1000>,
+				<0x17040000 0x17040000 0x1000>,
+				<0x17050000 0x17050000 0x10000>,
+				<0x17060000 0x17060000 0x200>,
+				<0x17060200 0x17060200 0x100>,
+				<0x17070000 0x17070000 0x200>,
+				<0x17070200 0x17070200 0x100>,
+				<0x170A0000 0x170A0000 0x3000>;
+
+			multimedia@15000000 {
+				compatible = "sirf,atlas7-video-codec";
+				reg = <0x15000000 0x10000>;
+				interrupts = <0 5 0>;
+				clocks = <&car 102>;
+			};
+
+			mediam@170A0000 {
+				compatible = "sirf,nocfw-mediam";
+				reg = <0x170A0000 0x3000>;
+			};
+
+			gpio_0: gpio_mediam@17040000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x17040000 0x1000>;
+				interrupts = <0 13 0>, <0 14 0>;
+				clocks = <&car 107>;
+				clock-names = "gpio0_io";
+				gpio-controller;
+				interrupt-controller;
+
+				gpio-banks = <2>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>;
+				gpio-ranges-group-names = "lvds_gpio_grp",
+							"uart_nand_gpio_grp";
+			};
+
+			nand@17050000 {
+				compatible = "sirf,atlas7-nand";
+				reg = <0x17050000 0x10000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&nd_df_pmx>;
+				interrupts = <0 41 0>;
+				clocks = <&car 108>, <&car 112>;
+				clock-names = "nand_io", "nand_nand";
+			};
+
+			sd0: sdhci@16000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16000000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				wp-inverted;
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			sd1: sdhci@16100000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16100000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			jpeg@17000000 {
+				compatible = "sirf,atlas7-jpeg";
+				reg = <0x17000000 0x10000>;
+				interrupts = <0 72 0>,
+					<0 73 0>;
+				clocks = <&car 103>;
+			};
+
+			usb0: usb@17060000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17060000 0x200>;
+				interrupts = <0 10 0>;
+				clocks = <&car 113>;
+				sirf,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usb1: usb@17070000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17070000 0x200>;
+				interrupts = <0 11 0>;
+				clocks = <&car 114>;
+				sirf,usbphy = <&usbphy1>;
+				phy_type = "utmi";
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usbphy0: usbphy@0 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17060200 0x100>;
+				clocks = <&car 115>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17070200 0x100>;
+				clocks = <&car 116>;
+				status = "okay";
+			};
+
+			i2c0: i2c@17020000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0x17020000 0x1000>;
+				interrupts = <0 24 0>;
+				clocks = <&car 105>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		vdifm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13290000 0x13290000 0x3000>,
+				<0x13300000 0x13300000 0x1000>,
+				<0x14200000 0x14200000 0x600000>;
+
+			vdifm@13290000 {
+				compatible = "sirf,nocfw-vdifm";
+				reg = <0x13290000 0x3000>;
+			};
+
+			gpio_1: gpio_vdifm@13300000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x13300000 0x1000>;
+				interrupts = <0 43 0>, <0 44 0>,
+						<0 45 0>, <0 46 0>;
+				clocks = <&car 84>;
+				clock-names = "gpio1_io";
+				gpio-controller;
+				interrupt-controller;
+
+				gpio-banks = <4>;
+				gpio-ranges = <&pinctrl 0 0 0>,
+						<&pinctrl 32 0 0>,
+						<&pinctrl 64 0 0>,
+						<&pinctrl 96 0 0>;
+				gpio-ranges-group-names = "gnss_gpio_grp",
+							"lcd_vip_gpio_grp",
+							"sdio_i2s_gpio_grp",
+							"sp_rgmii_gpio_grp";
+			};
+
+			sd2: sdhci@14200000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14200000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 70>, <&car 75>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				sd-uhs-sdr50;
+				vqmmc-supply = <&vqmmc>;
+				vqmmc: vqmmc@2 {
+					regulator-min-microvolt = <1650000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-name = "vqmmc-ldo";
+					regulator-type = "voltage";
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+			};
+
+			sd3: sdhci@14300000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14300000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 76>, <&car 81>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd5: sdhci@14500000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14500000 0x100000>;
+				interrupts = <0 39 0>;
+				clocks = <&car 71>, <&car 76>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				loop-dma;
+			};
+
+			sd6: sdhci@14600000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14600000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd7: sdhci@14700000 {
+				cell-index = <7>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14700000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+		};
+
+		audiom {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
+					<0x10d60000 0x10d60000 0x0000ffff>,
+					<0x10d80000 0x10d80000 0x0000ffff>,
+					<0x10d90000 0x10d90000 0x0000ffff>,
+					<0x10ED0000 0x10ED0000 0x3000>,
+					<0x10dc8000 0x10dc8000 0x1000>,
+					<0x10dc0000 0x10dc0000 0x1000>,
+					<0x10db0000 0x10db0000 0x4000>,
+					<0x10d40000 0x10d40000 0x1000>,
+					<0x10d30000 0x10d30000 0x1000>;
+
+			timer@10dc0000 {
+				compatible = "sirf,atlas7-tick";
+				reg = <0x10dc0000 0x1000>;
+				interrupts = <0 0 0>,
+					   <0 1 0>,
+					   <0 2 0>,
+					   <0 49 0>,
+					   <0 50 0>,
+					   <0 51 0>;
+				clocks = <&car 47>;
+			};
+
+			timerb@10dc8000 {
+					compatible = "sirf,atlas7-tick";
+					reg = <0x10dc8000 0x1000>;
+					interrupts = <0 74 0>,
+							   <0 75 0>,
+							   <0 76 0>,
+							   <0 77 0>,
+							   <0 78 0>,
+							   <0 79 0>;
+					clocks = <&car 47>;
+			};
+
+			vip0@10db0000 {
+				compatible = "sirf,atlas7-vip0";
+				reg = <0x10db0000 0x2000>;
+				interrupts = <0 85 0>;
+				sirf,vip_cma_size = <0xC00000>;
+			};
+
+			cvd@10db2000 {
+				compatible = "sirf,cvd";
+				reg = <0x10db2000 0x2000>;
+				clocks = <&car 46>;
+			};
+
+			dmac2: dma-controller@10d50000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d50000 0xffff>;
+				interrupts = <0 55 0>;
+				clocks = <&car 60>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			dmac3: dma-controller@10d60000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d60000 0xffff>;
+				interrupts = <0 56 0>;
+				clocks = <&car 61>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			adc: adc@10d80000 {
+				compatible = "sirf,atlas7-adc";
+				reg = <0x10d80000 0xffff>;
+				interrupts = <0 34 0>;
+				clocks = <&car 49>;
+				#io-channel-cells = <1>;
+			};
+
+			pulsec@10d90000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0x10d90000 0xffff>;
+				interrupts = <0 42 0>;
+				clocks = <&car 54>;
+			};
+
+			audiom@10ED0000 {
+				compatible = "sirf,nocfw-audiom";
+				reg = <0x10ED0000 0x3000>;
+				interrupts = <0 102 0>;
+			};
+
+			usp1: usp@10d30000 {
+				cell-index = <1>;
+				reg = <0x10d30000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 58>;
+				dmas = <&dmac2 6>, <&dmac2 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp2: usp@10d40000 {
+				cell-index = <2>;
+				reg = <0x10d40000 0x1000>;
+				interrupts = <0 22 0>;
+				clocks = <&car 59>;
+				dmas = <&dmac2 12>, <&dmac2 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ddrm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10820000 0x10820000 0x3000>,
+					<0x10800000 0x10800000 0x2000>;
+			ddrm@10820000 {
+				compatible = "sirf,nocfw-ddrm";
+				reg = <0x10820000 0x3000>;
+				interrupts = <0 105 0>;
+			};
+
+			memory-controller@0x10800000 {
+				compatible = "sirf,atlas7-memc";
+				reg = <0x10800000 0x2000>;
+			};
+
+		};
+
+		btm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x11002000 0x11002000 0x0000ffff>,
+			       <0x11010000 0x11010000 0x3000>,
+			       <0x11000000 0x11000000 0x1000>,
+			       <0x11001000 0x11001000 0x1000>;
+
+			dmac4: dma-controller@11002000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x11002000 0x1000>;
+				interrupts = <0 99 0>;
+				clocks = <&car 130>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+			uart6: uart@11000000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-bt-uart",
+						"sirf,atlas7-uart";
+				reg = <0x11000000 0x1000>;
+				interrupts = <0 100 0>;
+				clocks = <&car 131>, <&car 133>, <&car 134>;
+				clock-names = "uart", "general", "noc";
+				fifosize = <128>;
+				dmas = <&dmac4 12>, <&dmac4 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			usp3: usp@11001000 {
+				compatible = "sirf,atlas7-bt-usp",
+					   "sirf,prima2-usp-pcm";
+				cell-index = <3>;
+				reg = <0x11001000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 132>, <&car 129>, <&car 133>,
+					<&car 134>, <&car 135>;
+				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
+					"noc_btm_io", "thbtm_io";
+				dmas = <&dmac4 0>, <&dmac4 1>;
+				dma-names = "rx", "tx";
+			};
+
+			btm@11010000 {
+				compatible = "sirf,nocfw-btm";
+				reg = <0x11010000 0x3000>;
+			};
+		};
+
+		rtcm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18810000 0x18810000 0x3000>,
+				<0x18840000 0x18840000 0x1000>,
+				<0x18890000 0x18890000 0x1000>,
+				<0x188B0000 0x188B0000 0x10000>,
+				<0x188D0000 0x188D0000 0x1000>;
+			rtcm@18810000 {
+				compatible = "sirf,nocfw-rtcm";
+				reg = <0x18810000 0x3000>;
+				interrupts = <0 109 0>;
+			};
+
+			gpio_2: gpio_rtcm@18890000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x18890000 0x1000>;
+				interrupts = <0 47 0>;
+				gpio-controller;
+				interrupt-controller;
+
+				gpio-banks = <1>;
+				gpio-ranges = <&pinctrl 0 0 0>;
+				gpio-ranges-group-names = "rtc_gpio_grp";
+			};
+
+			rtc-iobg@18840000 {
+				compatible = "sirf,prima2-rtciobg",
+					"sirf-prima2-rtciobg-bus",
+					"simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x18840000 0x1000>;
+
+				sysrtc@2000 {
+					compatible = "sirf,prima2-sysrtc";
+					reg = <0x2000 0x100>;
+					interrupts = <0 52 0>;
+				};
+				pwrc@3000 {
+					compatible = "sirf,atlas7-pwrc";
+					reg = <0x3000 0x100>;
+				};
+			};
+
+			qspi: flash@188B0000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-qspi-nor";
+				reg = <0x188B0000 0x10000>;
+				interrupts = <0 15 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			retain@0x188D0000 {
+				compatible = "sirf,atlas7-retain";
+				reg = <0x188D0000 0x1000>;
+			};
+
+		};
+		disp-iobg {
+			/* lcdc0 */
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13100000 0x13100000 0x20000>,
+				<0x10e10000 0x10e10000 0x10000>,
+				<0x17010000 0x17010000 0x10000>;
+
+			lcd@13100000 {
+				compatible = "sirf,atlas7-lcdc";
+				reg = <0x13100000 0x10000>;
+				interrupts = <0 30 0>;
+				clocks = <&car 79>;
+			};
+			vpp@13110000 {
+				compatible = "sirf,atlas7-vpp";
+				reg = <0x13110000 0x10000>;
+				interrupts = <0 31 0>;
+				clocks = <&car 78>;
+				resets = <&car 29>;
+			};
+			lvds@10e10000 {
+				compatible = "sirf,atlas7-lvdsc";
+				reg = <0x10e10000 0x10000>;
+				interrupts = <0 64 0>;
+				clocks = <&car 54>;
+				resets = <&car 29>;
+			};
+			g2d@17010000 {
+				compatible = "sirf, atlas7-g2d";
+				reg = <0x17010000 0x10000>;
+				interrupts = <0 61 0>;
+				clocks = <&car 104>;
+			};
+
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x12000000 0x12000000 0x1000000>;
+
+			graphics@12000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x12000000 0x1000000>;
+				interrupts = <0 6 0>;
+				clocks = <&car 126>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
new file mode 100644
index 000000000..2e2ad3c7e
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-amarillo.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
new file mode 100644
index 000000000..3bcf4e0a3
--- /dev/null
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
new file mode 100644
index 000000000..7676a6505
--- /dev/null
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x2000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: uart@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: uart@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: uart@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: uart@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
new file mode 100644
index 000000000..f90ad6c64
--- /dev/null
+++ b/arch/arm/boot/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
new file mode 100644
index 000000000..0d9ff12bd
--- /dev/null
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power-supply {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi
new file mode 100644
index 000000000..b91b6c127
--- /dev/null
+++ b/arch/arm/boot/dts/axp223.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
new file mode 100644
index 000000000..65a07a67a
--- /dev/null
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
new file mode 100644
index 000000000..ab8e5f2d9
--- /dev/null
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
new file mode 100644
index 000000000..1dfeeceab
--- /dev/null
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power-supply {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio0_ldo: gpio0-ldo {
+			pins = "GPIO0";
+			function = "ldo";
+		};
+
+		gpio1_ldo: gpio1-ldo {
+			pins = "GPIO1";
+			function = "ldo";
+		};
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power-supply {
+		compatible = "x-powers,axp813-usb-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
new file mode 100644
index 000000000..52f91a12a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -0,0 +1,133 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* Cygnus ARM PLL */
+	armpll: armpll@19000000 {
+		#clock-cells = <0>;
+		compatible = "brcm,cygnus-armpll";
+		clocks = <&osc>;
+		reg = <0x19000000 0x1000>;
+	};
+
+	/* peripheral clock for system timer */
+	periph_clk: arm_periph_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	/* APB bus clock */
+	apb_clk: apb_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll: genpll@301d000 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-genpll";
+		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+				     "enet_sw", "audio_125", "can";
+	};
+
+	/* always 1/2 of the axi21 clock */
+	axi41_clk: axi41_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	/* always 1/4 of the axi21 clock */
+	axi81_clk: axi81_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	lcpll0: lcpll0@301d02c {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-lcpll0";
+		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+				     "usb_phy", "smart_card", "ch5";
+	};
+
+	mipipll: mipipll@180a9800 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-mipipll";
+		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+				     "ch2_v3d", "ch3_unused", "ch4_unused",
+				     "ch5_unused";
+	};
+
+	asiu_clks: asiu_clks@301d048 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-asiu-clk";
+		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+		clocks = <&osc>;
+		clock-output-names = "keypad", "adc/touch", "pwm";
+	};
+
+	audiopll: audiopll@180aeb00 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-audiopll";
+		reg = <0x180aeb00 0x68>;
+		clocks = <&osc>;
+		clock-output-names = "audiopll", "ch0_audio",
+					"ch1_audio", "ch2_audio";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
new file mode 100644
index 000000000..ea3dc128b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -0,0 +1,624 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,cygnus";
+	model = "Broadcom Cygnus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	/include/ "bcm-cygnus-clock.dtsi"
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	core@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		otp: otp@301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		pinctrl: pinctrl@301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
+		};
+
+		mailbox: mailbox@3024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
+
+		gpio_crmu: gpio@3024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
+		};
+
+		mdio: mdio@18002000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x18002000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			status = "disabled";
+
+			gphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			gphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		switch: switch@18007000 {
+			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+			reg = <0x18007000 0x1000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-handle = <&gphy0>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					phy-handle = <&gphy1>;
+					phy-mode = "rgmii";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+		};
+
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <0>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
+				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi0>;
+			msi0: msi-controller {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,pci-domain = <1>;
+
+			bus-range = <0x00 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
+				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi1>;
+			msi1: msi-controller {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		dma0: dma@18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18022000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		rng: rng@18032000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x18032000 0x28>;
+		};
+
+		sdhci0: sdhci@18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		eth0: ethernet@18042000 {
+			compatible = "brcm,amac";
+			reg = <0x18042000 0x1000>,
+			      <0x18110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		ehci0: usb@18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		clcd: clcd@180a0000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x180a0000 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			clocks = <&axi41_clk>, <&apb_clk>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		v3d: v3d@180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm: pwm@180aa500 {
+			compatible = "brcm,kona-pwm";
+			reg = <0x180aa500 0xc4>;
+			#pwm-cells = <3>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+			status = "disabled";
+		};
+
+		keypad: keypad@180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
new file mode 100644
index 000000000..84cda16f6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,hr2";
+	model = "Broadcom Hurricane 2 SoC";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	mpcore@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,hr2-armpll";
+			clocks = <&osc>;
+			reg = <0x0 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x22000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x26000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* partitions defined in board DTS */
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog: watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@3b000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x3b000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+	};
+
+	pflash: nor@20000000 {
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x04000000>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* partitions defined in board DTS */
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi-controller {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi-controller {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
new file mode 100644
index 000000000..1dae02bb8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -0,0 +1,659 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,nsp";
+	model = "Broadcom Northstar Plus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &amac0;
+		ethernet1 = &amac1;
+		ethernet2 = &amac2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			enable-method = "brcm,bcm-nsp-smp";
+			secondary-boot-reg = <0xffff0fec>;
+			reg = <0x1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpioa: gpio@20 {
+			compatible = "brcm,nsp-gpio-a";
+			reg = <0x0020 0x70>,
+			      <0x3f1c4 0x1c>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <32>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma: dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sdio: mmc@21000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x21000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			sdhci,auto-cmd12;
+			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac2: ethernet@24000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x024000 0x1000>,
+			      <0x112000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		mailbox: mailbox@25c00 {
+			compatible = "brcm,iproc-fa2-mbox";
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+			dma-coherent;
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb3-phy";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto@2f000 {
+			compatible = "brcm,spum-nsp-crypto";
+			reg = <0x2f000 0x900>;
+			mboxes = <&mailbox 0>;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		srab: srab@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
+
+		pinctrl: pinctrl@3f1c0 {
+			compatible = "brcm,nsp-pinmux";
+			reg = <0x3f1c0 0x04>,
+			      <0x30028 0x04>,
+			      <0x3f408 0x04>;
+		};
+
+		thermal: thermal@3f2c0 {
+			compatible = "brcm,ns-thermal";
+			reg = <0x3f2c0 0x10>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		sata_phy: sata_phy@40100 {
+			compatible = "brcm,iproc-nsp-sata-phy";
+			reg = <0x40100 0x340>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: ahci@41000 {
+			compatible = "brcm,bcm-nsp-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x41000 0x1000>, <0x40020 0x1c>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dma-coherent;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		usb3_phy: usb3-phy@104000 {
+			compatible = "brcm,ns-bx-usb3-phy";
+			reg = <0x104000 0x1000>,
+			      <0x032000 0x1000>;
+			reg-names = "dmp", "ccb-mii";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi-controller {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi-controller {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie2: pcie@18014000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18014000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <2>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi-controller {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature     = <125000>;
+					hysteresis      = <0>;
+					type            = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
new file mode 100644
index 000000000..6197e7d80
--- /dev/null
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -0,0 +1,424 @@
+/*
+ * Copyright (C) 2012-2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm281xx.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM11351 SoC";
+	compatible = "brcm,bcm11351";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@3404c000 {
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e003000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache@3ff20000 {
+		compatible = "brcm,bcm11351-a2-pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x10000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x10000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x10000>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	pinctrl@35004800 {
+		compatible = "brcm,bcm11351-pinctrl";
+		reg = <0x35004800 0x430>;
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu@34000000 {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+		};
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_cx40_clk: ref_cx40 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
new file mode 100644
index 000000000..be468f4ad
--- /dev/null
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	sdio1: sdio@3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
new file mode 100644
index 000000000..58ec1b2f8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm21664.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+       cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: cache-controller@3ff20000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
new file mode 100644
index 000000000..ace77709f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -0,0 +1,81 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
new file mode 100644
index 000000000..a36c9b1d2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -0,0 +1,415 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include "dt-bindings/clock/bcm21664.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM23550 SoC";
+	compatible = "brcm,bcm23550";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	/* Hub bus */
+	hub@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc@4e000 {
+			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+			reg = <0x01003000 0x524>;
+			interrupts =
+			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		bsc1: i2c@16000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01b77000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: sdio@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: sdio@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: sdio@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000..167538518
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	sd_io_1v8_reg: sd_io_1v8_reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_OFF",
+				  "GLOBAL_RESET",
+				  "VDD_SD_IO_SEL",
+				  "CAM_GPIO",
+				  "SD_PWR_ON",
+				  "";
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	status = "okay";
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	status = "okay";
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
new file mode 100644
index 000000000..b50229c31
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -0,0 +1,1131 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	soc {
+		/*
+		 * Defined ranges:
+		 *   Common BCM283x peripherals
+		 *   BCM2711-specific peripherals
+		 *   ARM-local peripherals
+		 */
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
+
+		/*
+		 * This node is the provider for the enable-method for
+		 * bringing up secondary cores.
+		 */
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: interrupt-controller@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xb00>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     /* DMA lite 7 - 10 */
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x07f5>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pixelvalve4: pixelvalve@7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve3: pixelvalve@7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		hdmi0: hdmi@7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 0>;
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c@7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi@7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 1>;
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c@7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
+		emmc2: mmc@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			reg = <0x0 0x7e340000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			status = "disabled";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* This only applies to the ARMv7 stub */
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
+		};
+	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,bcm2711-genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			genet_mdio: mdio@e14 {
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio";
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0_gpio49 {
+		pin-gpclk {
+			pins = "gpio49";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk1_gpio50: gpclk1_gpio50 {
+		pin-gpclk {
+			pins = "gpio50";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk2_gpio51: gpclk2_gpio51 {
+		pin-gpclk {
+			pins = "gpio51";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	i2c0_gpio46: i2c0_gpio46 {
+		pin-sda {
+			function = "alt0";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt0";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c1_gpio46: i2c1_gpio46 {
+		pin-sda {
+			function = "alt1";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt1";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c3_gpio2: i2c3_gpio2 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio2";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio3";
+			bias-disable;
+		};
+	};
+	i2c3_gpio4: i2c3_gpio4 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio4";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio5";
+			bias-disable;
+		};
+	};
+	i2c4_gpio6: i2c4_gpio6 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio6";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio7";
+			bias-disable;
+		};
+	};
+	i2c4_gpio8: i2c4_gpio8 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio8";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio9";
+			bias-disable;
+		};
+	};
+	i2c5_gpio10: i2c5_gpio10 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio10";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio11";
+			bias-disable;
+		};
+	};
+	i2c5_gpio12: i2c5_gpio12 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio12";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio13";
+			bias-disable;
+		};
+	};
+	i2c6_gpio0: i2c6_gpio0 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio0";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio1";
+			bias-disable;
+		};
+	};
+	i2c6_gpio22: i2c6_gpio22 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio22";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio23";
+			bias-disable;
+		};
+	};
+	i2c_slave_gpio8: i2c_slave_gpio8 {
+		pins-i2c-slave {
+			pins = "gpio8",
+			       "gpio9",
+			       "gpio10",
+			       "gpio11";
+			function = "alt3";
+		};
+	};
+
+	jtag_gpio48: jtag_gpio48 {
+		pins-jtag {
+			pins = "gpio48",
+			       "gpio49",
+			       "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt4";
+		};
+	};
+
+	mii_gpio28: mii_gpio28 {
+		pins-mii {
+			pins = "gpio28",
+			       "gpio29",
+			       "gpio30",
+			       "gpio31";
+			function = "alt4";
+		};
+	};
+	mii_gpio36: mii_gpio36 {
+		pins-mii {
+			pins = "gpio36",
+			       "gpio37",
+			       "gpio38",
+			       "gpio39";
+			function = "alt5";
+		};
+	};
+
+	pcm_gpio50: pcm_gpio50 {
+		pins-pcm {
+			pins = "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt2";
+		};
+	};
+
+	pwm0_0_gpio12: pwm0_0_gpio12 {
+		pin-pwm {
+			pins = "gpio12";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio18: pwm0_0_gpio18 {
+		pin-pwm {
+			pins = "gpio18";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_0_gpio40: pwm1_0_gpio40 {
+		pin-pwm {
+			pins = "gpio40";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio13: pwm0_1_gpio13 {
+		pin-pwm {
+			pins = "gpio13";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio19: pwm0_1_gpio19 {
+		pin-pwm {
+			pins = "gpio19";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_1_gpio41: pwm1_1_gpio41 {
+		pin-pwm {
+			pins = "gpio41";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio45: pwm0_1_gpio45 {
+		pin-pwm {
+			pins = "gpio45";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio52: pwm0_0_gpio52 {
+		pin-pwm {
+			pins = "gpio52";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio53: pwm0_1_gpio53 {
+		pin-pwm {
+			pins = "gpio53";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	rgmii_gpio35: rgmii_gpio35 {
+		pin-start-stop {
+			pins = "gpio35";
+			function = "alt4";
+		};
+		pin-rx-ok {
+			pins = "gpio36";
+			function = "alt4";
+		};
+	};
+	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+		pin-irq {
+			pins = "gpio34";
+			function = "alt5";
+		};
+	};
+	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+		pin-irq {
+			pins = "gpio39";
+			function = "alt4";
+		};
+	};
+	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+		pins-mdio {
+			pins = "gpio28",
+			       "gpio29";
+			function = "alt5";
+		};
+	};
+	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+		pins-mdio {
+			pins = "gpio37",
+			       "gpio38";
+			function = "alt4";
+		};
+	};
+
+	spi0_gpio46: spi0_gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49";
+			function = "alt2";
+		};
+	};
+	spi2_gpio46: spi2_gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49",
+			       "gpio50";
+			function = "alt5";
+		};
+	};
+	spi3_gpio0: spi3_gpio0 {
+		pins-spi {
+			pins = "gpio0",
+			       "gpio1",
+			       "gpio2",
+			       "gpio3";
+			function = "alt3";
+		};
+	};
+	spi4_gpio4: spi4_gpio4 {
+		pins-spi {
+			pins = "gpio4",
+			       "gpio5",
+			       "gpio6",
+			       "gpio7";
+			function = "alt3";
+		};
+	};
+	spi5_gpio12: spi5_gpio12 {
+		pins-spi {
+			pins = "gpio12",
+			       "gpio13",
+			       "gpio14",
+			       "gpio15";
+			function = "alt3";
+		};
+	};
+	spi6_gpio18: spi6_gpio18 {
+		pins-spi {
+			pins = "gpio18",
+			       "gpio19",
+			       "gpio20",
+			       "gpio21";
+			function = "alt3";
+		};
+	};
+
+	uart2_gpio0: uart2_gpio0 {
+		pin-tx {
+			pins = "gpio0";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio1";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+		pin-cts {
+			pins = "gpio2";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio3";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart3_gpio4: uart3_gpio4 {
+		pin-tx {
+			pins = "gpio4";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio5";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+		pin-cts {
+			pins = "gpio6";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio7";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart4_gpio8: uart4_gpio8 {
+		pin-tx {
+			pins = "gpio8";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio9";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+		pin-cts {
+			pins = "gpio10";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio11";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart5_gpio12: uart5_gpio12 {
+		pin-tx {
+			pins = "gpio12";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio13";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+		pin-cts {
+			pins = "gpio14";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio15";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+};
+
+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
+&i2c0 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi {
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&system_timer {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vec {
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
new file mode 100644
index 000000000..ead6e9804
--- /dev/null
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	i2c@3e016000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e017000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e018000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3500d000 {
+		status="okay";
+		clock-frequency = <100000>;
+
+		pmu: pmu@8 {
+			reg = <0x08>;
+		};
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
+		status = "okay";
+	};
+
+	pwm: pwm@3e01a000 {
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
new file mode 100644
index 000000000..4119271c9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	interrupt-parent = <&intc>;
+
+	soc {
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+};
+
+&cpu_thermal {
+	thermal-sensors = <&thermal>;
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c_slave_gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag_gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pwm0_gpio12: pwm0_gpio12 {
+		brcm,pins = <12>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm0_gpio18: pwm0_gpio18 {
+		brcm,pins = <18>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm0_gpio40: pwm0_gpio40 {
+		brcm,pins = <40>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio13: pwm1_gpio13 {
+		brcm,pins = <13>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio19: pwm1_gpio19 {
+		brcm,pins = <19>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm1_gpio41: pwm1_gpio41 {
+		brcm,pins = <41>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio45: pwm1_gpio45 {
+		brcm,pins = <45>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2s {
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+};
+
+&sdhost {
+	dmas = <&dma 13>;
+	dma-names = "rx-tx";
+};
+
+&spi {
+	dmas = <&dma 6>, <&dma 7>;
+	dma-names = "tx", "rx";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000..40b9405f1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
new file mode 100644
index 000000000..11edb581d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
new file mode 100644
index 000000000..1b435c64b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "ETHCLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000..a23c25c00
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
new file mode 100644
index 000000000..25d87212c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "NC", /* GPIO12 */
+			  "NC", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "NC", /* GPIO19 */
+			  "NC", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "NC", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "PWM0_OUT",
+			  "NC", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 000000000..a75c882e6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 000000000..e4e6b6abb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000..8a55b6cde
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000..00582eb2c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
new file mode 100644
index 000000000..6f9b3a908
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "NC", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "NC", /* GPIO42 */
+			  "NC", /* GPIO43 */
+			  "NC", /* GPIO44 */
+			  "NC", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
new file mode 100644
index 000000000..87ddcad76
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -0,0 +1,81 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mboxes = <&mailbox>;
+			dma-ranges;
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
new file mode 100644
index 000000000..054968613
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000..d8af8eeac
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETHCLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
new file mode 100644
index 000000000..c4c858b98
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
new file mode 100644
index 000000000..b390006ae
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000..77099a787
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/*
+ * SDHCI is used to control the SDIO for wireless
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000..90472e76a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000..dd4a48604
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		led-act {
+			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HDMI_HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000..3dfce4312
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000..828a20561
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		/*
+		 * Since there is no upstream GPIO driver yet,
+		 * remove the incomplete node.
+		 */
+		/delete-node/ led-act;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC",
+				  "NC";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
new file mode 100644
index 000000000..5dbdebc46
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000..70bece63f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 000000000..967e081cb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000..dc7ae776d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 000000000..73f4ece8d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
new file mode 100644
index 000000000..e2fd9610e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "otg";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	/*
+	 * According to dwc2 the sum of all device EP
+	 * fifo sizes shouldn't exceed 3776 bytes.
+	 */
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
new file mode 100644
index 000000000..0ff0e9e25
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "peripheral";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
new file mode 100644
index 000000000..ffdf7c4fb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -0,0 +1,511 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			trips {
+				cpu-crit {
+					temperature	= <90000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		system_timer: timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp: txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&gpio 0 0 54>;
+
+			/* Defines common pin muxing groups
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi_gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc_gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0_gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1_gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1_gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1_gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2_gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2_gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0_gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0_gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1_gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1_gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			jtag_gpio22: jtag_gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm_gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm_gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			sdhost_gpio48: sdhost_gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0_gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0_gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1_gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2_gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0_gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1_gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1_gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1_gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x200>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x200>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x200>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clk-usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
new file mode 100644
index 000000000..8ed403767
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac56u", "brcm,bcm4708";
+	model = "Asus RT-AC56U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		all {
+			label = "bcm53xx:blue:all";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
new file mode 100644
index 000000000..667b118ba
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac68u", "brcm,bcm4708";
+	model = "Asus RT-AC68U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
new file mode 100644
index 000000000..ff31ce458
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1750DHP
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1750DHP (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		power0 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		power1 {
+			label = "bcm53xx:white:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router0 {
+			label = "bcm53xx:blue:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		sw_ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
new file mode 100644
index 000000000..41548d6d4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+	model = "Linksys EA6300 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
new file mode 100644
index 000000000..01c48faab
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+	model = "Linksys EA6500 V2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000..810fc32f1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
new file mode 100644
index 000000000..7604b4480
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nand: nand@18028000 {
+		nandcs@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000..7900aac4f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -0,0 +1,96 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
new file mode 100644
index 000000000..4c60eda29
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6300v2", "brcm,bcm4708";
+	model = "Netgear R6300 V2 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
new file mode 100644
index 000000000..7d46561fc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "smartrg,sr400ac", "brcm,bcm4708";
+	model = "SmartRG SR400ac";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		usb3-green {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		status-red {
+			label = "bcm53xx:red:status";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		status-green {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		status-blue {
+			label = "bcm53xx:blue:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-red {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
new file mode 100644
index 000000000..1a19e97a9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -0,0 +1,48 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			secondary-boot-reg = <0xffff0400>;
+			reg = <0x1>;
+		};
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
new file mode 100644
index 000000000..0e273c598
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Asus RT-N18U (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
new file mode 100644
index 000000000..083ec4036
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch device mode? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
new file mode 100644
index 000000000..8b1a05a0f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-900DHP (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000..1ec655809
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@4 {
+			reg = <4>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 000000000..04bfd5812
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
new file mode 100644
index 000000000..01c390ed4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "TP-LINK Archer C5 V2";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan {
+			label = "bcm53xx:green:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2-port1 {
+			label = "bcm53xx:green:usb2-port1";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-green {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "bcm53xx:green:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb2-port2 {
+			label = "bcm53xx:green:usb2-port2";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
new file mode 100644
index 000000000..ed13af028
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm47081";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
new file mode 100644
index 000000000..7546c8d07
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Asus RT-AC87U";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
new file mode 100644
index 000000000..beae9eab9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WXR-1900DHP
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Buffalo WXR-1900DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router-amber {
+			label = "bcm53xx:amber:router";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		router-white {
+			label = "bcm53xx:white:router";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless-amber {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless-white {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		sw_ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000..ee94455a7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
new file mode 100644
index 000000000..56d309dbc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
new file mode 100644
index 000000000..184e3039a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -0,0 +1,189 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R8000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R8000 (BCM4709)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 000000000..c2a266a43
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x000000 0x040000>;
+			read-only;
+		};
+
+		os-image@100000 {
+			label = "os-image";
+			reg = <0x040000 0x200000>;
+			compatible = "brcm,trx";
+		};
+
+		rootfs@240000 {
+			label = "rootfs";
+			reg = <0x240000 0xc00000>;
+		};
+
+		nvram@ff0000 {
+			label = "nvram";
+			reg = <0xff0000 0x010000>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
new file mode 100644
index 000000000..e1bb86619
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000..e635a1504
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nand: nand@18028000 {
+		nandcs@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
new file mode 100644
index 000000000..36d63beba
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-bus-mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* BIT(9) = 1 => external mdio */
+		mdio_ext: mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mii-mux {
+		compatible = "mdio-mux-mmioreg";
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1800c1c0 0x4>;
+
+		/* BIT(6) = mdc, BIT(7) = mdio */
+		mux-mask = <0xc0>;
+
+		mdio-mii@0 {
+			/* Enable MII function */
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			label = "lan7";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan4";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan8";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			ethernet = <&gmac2>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sw0_p0: port@0 {
+			reg = <0>;
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000..a6dc99955
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000..068e384b8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000..ff98837bc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 000000000..3d415d874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 000000000..9f7980257
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power	{
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan3	{
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan4	{
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wan	{
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		lan1	{
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2	{
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		usb3	{
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000..c8dfa4c58
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power	{
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3	{
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		status	{
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
new file mode 100644
index 000000000..42097a4c2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Netgear R8500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
new file mode 100644
index 000000000..a2566ad46
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Phicomm K3";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x0080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "phicomm";
+			reg = <0x0180000 0x0280000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "firmware";
+			reg = <0x0400000 0x7C00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
new file mode 100644
index 000000000..cdc5ff593
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000..00e688b45
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
new file mode 100644
index 000000000..78c80a5d3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-810 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	pcie0_leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
new file mode 100644
index 000000000..049cdfd92
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	pcie0_leds {
+		compatible = "gpio-leds";
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000..ca2266b93
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
new file mode 100644
index 000000000..edf991010
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		red {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		green {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		blue {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	i2c {
+		/*
+		 * The platform provided I2C does not budge.
+		 * This is a replacement until I can figure
+		 * out what are the missing bits...
+		 */
+
+		compatible = "i2c-gpio";
+		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		current_sense: ina219@45 {
+			compatible = "ti,ina219";
+			reg = <0x45>;
+			shunt-resistor = <60000>; /* = 60 mOhms */
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+			read-only;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition0@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition1@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition2@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition3@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition4@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
new file mode 100644
index 000000000..c349e8f0a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <1>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 000000000..18e25e302
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
new file mode 100644
index 000000000..c8e56d30b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
+ *
+ * This should be included if the NAND controller is on chip select 0
+ * and uses 8 bit ECC.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 000000000..925a7c9ce
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+/ {
+	nand@18028000 {
+		nandcs: nandcs@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
new file mode 100644
index 000000000..9189a9489
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -0,0 +1,570 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chipcommonA@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	usb2_phy: usb2-phy@1800c000 {
+		compatible = "brcm,ns-usb2-phy";
+		reg = <0x1800c000 0x1000>;
+		reg-names = "dmu";
+		#phy-cells = <0>;
+		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+		clock-names = "phy-ref-clk";
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map = 
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: xhci@23000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-bus-mux@18003000 {
+		compatible = "mdio-mux-mmioreg";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru@100 {
+			compatible = "simple-bus";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pin-controller@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1 {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+		};
+	};
+
+	lcpll0: lcpll0@1800c100 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-lcpll0";
+		reg = <0x1800c100 0x14>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "sdio",
+				     "ddr_phy";
+	};
+
+	genpll: genpll@1800c140 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-genpll";
+		reg = <0x1800c140 0x24>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "phy", "ethernetclk",
+				     "usbclk", "iprocfast", "sata1",
+				     "sata2";
+	};
+
+	thermal: thermal@1800c2c0 {
+		compatible = "brcm,ns-thermal";
+		reg = <0x1800c2c0 0x10>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	srab: srab@18007000 {
+		compatible = "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		/* ports are defined in board DTS */
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	nand: nand@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <125000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
new file mode 100644
index 000000000..2e7fda9b9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -0,0 +1,86 @@
+/*
+ * DTS for Unifi Switch 8 port
+ *
+ * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm-hr2.dtsi"
+
+/ {
+	compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
+	model = "Ubiquiti UniFi Switch 8 (BCM53342)";
+
+	/* Hurricane 2 designs use the second UART */
+	chosen {
+		bootargs = "console=ttyS1,115200 earlyprintk";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x68000000 0x08000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+
+	flash: m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12500000>;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "u-boot-env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "shmoo";
+			reg = <0xd0000 0x10000>;
+		};
+
+		partition@e0000 {
+			label = "kernel0";
+			reg = <0xe0000 0xf00000>;
+		};
+
+		partition@fe0000 {
+			label = "kernel1";
+			reg = <0xfe0000 0xf10000>;
+		};
+
+		partition@1ef0000 {
+			label = "cfg";
+			reg = <0x1ef0000 0x100000>;
+		};
+
+		partition@1ff0000 {
+			label = "EEPROM";
+			reg = <0x1ff0000 0x10000>;
+		};
+	};
+};
+
+&pcie0 {
+	/* Attaches to the internal switch */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
new file mode 100644
index 000000000..eed1a6147
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore@18310000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		pcie0: pcie@2000 {
+			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: usb@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@d000 {
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					/* ports are defined in board DTS */
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
new file mode 100644
index 000000000..a9bb7ad81
--- /dev/null
+++ b/arch/arm/boot/dts/bcm59056.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
new file mode 100644
index 000000000..cca49a2e2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138";
+	model = "Broadcom BCM63138 DSL SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8100>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand";
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
new file mode 100644
index 000000000..f92d2cf85
--- /dev/null
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm7445.dtsi"
+
+/ {
+	model = "Broadcom STB (bcm7445), SVMB reference board";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00000000 0x00 0x40000000>,
+		      <0x00 0x40000000 0x00 0x40000000>,
+		      <0x00 0x80000000 0x00 0x40000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <8>;
+		nand-on-flash-bbt;
+
+		#size-cells = <2>;
+		#address-cells = <2>;
+
+		flash1.rootfs0@0 {
+			reg = <0x0 0x0 0x0 0x80000000>;
+		};
+
+		flash1.rootfs1@80000000 {
+			reg = <0x0 0x80000000 0x0 0x80000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
new file mode 100644
index 000000000..5ac204251
--- /dev/null
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Broadcom STB (bcm7445)";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <3>;
+		};
+	};
+
+	gic: interrupt-controller@ffd00000 {
+		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+		reg = <0x00 0xffd01000 0x00 0x1000>,
+		      <0x00 0xffd02000 0x00 0x2000>,
+		      <0x00 0xffd04000 0x00 0x2000>,
+		      <0x00 0xffd06000 0x00 0x2000>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	rdb@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0x00 0xf0000000 0x1000000>;
+
+		serial@40ab00 {
+			compatible = "ns16550a";
+			reg = <0x40ab00 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <81000000>;
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7445-sun-top-ctrl",
+				     "syscon";
+			reg = <0x404000 0x51c>;
+		};
+
+		hif_cpubiuctrl: syscon@3e2400 {
+			compatible = "brcm,bcm7445-hif-cpubiuctrl",
+				     "syscon";
+			reg = <0x3e2400 0x5b4>;
+		};
+
+		hif_continuation: syscon@452000 {
+			compatible = "brcm,bcm7445-hif-continuation",
+				     "syscon";
+			reg = <0x452000 0x100>;
+		};
+
+		irq0_intc: interrupt-controller@40a780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			reg = <0x40a780 0x8>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x45 0x0>,
+				     <GIC_SPI 0x43 0x0>;
+			brcm,int-map-mask = <0x25c>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+		};
+
+		irq0_aon_intc: interrupt-controller@417280 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x417280 0x8>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x46 0x0>,
+				     <GIC_SPI 0x44 0x0>,
+				     <GIC_SPI 0x49 0x0>;
+			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+			brcm,int-fwd-mask = <0x0>;
+			brcm,irq-can-wake;
+		};
+
+		hif_intr2_intc: interrupt-controller@3e1000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x3e1000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x20 0x0>;
+			interrupt-parent = <&gic>;
+			interrupt-names = "hif";
+		};
+
+                aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		nand_controller: nand-controller@3e2800 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg-names = "nand", "flash-dma";
+			reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
+			interrupt-parent = <&hif_intr2_intc>;
+			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
+		};
+
+		sata@45a000 {
+			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+			interrupts = <GIC_SPI 30 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@458100 {
+			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+			reg = <0x458100 0x1f00>;
+			reg-names = "phy";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		upg_gio: gpio@40a700 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x40a700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 24>;
+		};
+
+		upg_gio_aon: gpio@4172c0 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x4172c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts-extended = <&irq0_aon_intc 0x6>,
+					      <&aon_pm_l2_intc 0x5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+	};
+
+	memory_controllers@f1100000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@80000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@100000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
+	smpboot {
+		compatible = "brcm,brcmstb-smpboot";
+		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+		syscon-cont = <&hif_continuation>;
+	};
+
+	reboot {
+		compatible = "brcm,brcmstb-reboot";
+		syscon = <&sun_top_ctrl 0x304 0x308>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
new file mode 100644
index 000000000..a76c74b44
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -0,0 +1,99 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "dt-bindings/input/input.h"
+
+/ {
+	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		hook {
+			label = "HOOK";
+			linux,code = <KEY_O>;
+			gpios = <&gpio_asiu 48 0>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&v3d {
+	assigned-clocks =
+		<&mipipll BCM_CYGNUS_MIPIPLL>,
+		<&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+	assigned-clock-rates = <525000000>, <300000000>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
new file mode 100644
index 000000000..091c73a46
--- /dev/null
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -0,0 +1,52 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM911360K)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 000000000..d9eb2040b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94708)";
+	compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 000000000..618c812ee
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94709)";
+	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000..1f0be30e5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Broadcom BCM947189ACDBMR";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
+		cs-gpios = <&chipcommon 24 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* External BCM6802 MoCA chip is connected */
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
new file mode 100644
index 000000000..957468224
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -0,0 +1,95 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	model = "NorthStar Enterprise Router (BCM953012ER)";
+	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "port0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "port1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
new file mode 100644
index 000000000..9140be7ec
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -0,0 +1,102 @@
+/*
+ *  SPDX-License-Identifier: BSD-3-Clause
+ *
+ *  Copyright(c) 2017 Broadcom
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its contributors
+ *      may be used to endorse or promote products derived from this
+ *      software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	model = "NorthStar HR (BCM953012HR)";
+	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nandcs {
+	partition@0 {
+		label = "nboot";
+		reg = <0x00000000 0x00200000>;
+		read-only;
+	};
+	partition@200000 {
+		label = "nenv";
+		reg = <0x00200000 0x00400000>;
+	};
+	partition@600000 {
+		label = "nsystem";
+		reg = <0x00600000 0x00a00000>;
+	};
+	partition@1000000 {
+		label = "nrootfs";
+		reg = <0x01000000 0x07000000>;
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 000000000..046c59fb4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,120 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM953012K)";
+	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x07000000>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
new file mode 100644
index 000000000..dda3e11b7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -0,0 +1,77 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM958300K)";
+	compatible = "brcm,bcm58300", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 000000000..ea3c6b88b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,85 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
+
+/ {
+	model = "Cygnus Wireless Audio (BCM958305K)";
+	compatible = "brcm,bcm58305", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
new file mode 100644
index 000000000..5dd100125
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -0,0 +1,180 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm58522", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
new file mode 100644
index 000000000..0e624c57b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -0,0 +1,192 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
new file mode 100644
index 000000000..2ac6d61ad
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -0,0 +1,212 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* XHCI support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
new file mode 100644
index 000000000..e072fa835
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -0,0 +1,229 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm58622", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
new file mode 100644
index 000000000..835f4765e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -0,0 +1,233 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm58623", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
new file mode 100644
index 000000000..57974b8fa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -0,0 +1,256 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			label = "sfp";
+			phy-mode = "sgmii";
+			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
new file mode 100644
index 000000000..45a043ea7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -0,0 +1,273 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625K)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
+
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+
+	gpiobs: gpiobs {
+		function = "gpio_b";
+		groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
+			 "gpio_b_3_grp";
+	};
+
+	pwmc: pwmc {
+		function = "pwm";
+		groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+
+	emmc_sel: emmc_sel {
+		function = "emmc";
+		groups = "emmc_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+/*
+ * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
+ * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
+ * bus-width property here and disable the nand node with status = "disabled";.
+ *
+ * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
+ */
+&sdio {
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
new file mode 100644
index 000000000..df5c8ab90
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sectors-size = <16>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
new file mode 100644
index 000000000..16b212cc8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -0,0 +1,229 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm88312", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi
new file mode 100644
index 000000000..65397c088
--- /dev/null
+++ b/arch/arm/boot/dts/bcm9hmidc.dtsi
@@ -0,0 +1,42 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
new file mode 100644
index 000000000..64a297759
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Sony NSZ-GS7
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "berlin2.dtsi"
+
+/ {
+	model = "Sony NSZ-GS7";
+	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&ahci { status = "okay"; };
+
+&eth1 { status = "okay"; };
+
+/* Unpopulated SATA plug on solder side */
+&sata0 { status = "okay"; };
+
+&sata_phy { status = "okay"; };
+
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
new file mode 100644
index 000000000..6194857f8
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ *  (c) Marvell International Ltd.
+ */
+
+#include <dt-bindings/clock/berlin2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 1500 (BG2) SoC";
+	compatible = "marvell,berlin2", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc@f7000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+
+		sdhci0: mmc@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: mmc@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: mmc@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
+			clock-names = "io", "core";
+			pinctrl-0 = <&emmc_pmux>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		l2: cache-controller@ac0000 {
+			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip_clk CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		cpu-ctrl@dd0000 {
+			compatible = "marvell,berlin-cpu-ctrl";
+			reg = <0xdd0000 0x10000>;
+		};
+
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip_clk CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				interrupts = <8>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				interrupts = <9>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				interrupts = <10>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				interrupts = <11>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				interrupts = <12>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				interrupts = <13>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				interrupts = <14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				interrupts = <15>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3000 0xc00>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin2-ahci", "generic-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy 0>;
+				status = "disabled";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy 1>;
+				status = "disabled";
+			};
+		};
+
+		sata_phy: phy@e900a0 {
+			compatible = "marvell,berlin2-sata-phy";
+			reg = <0xe900a0 0x200>;
+			clocks = <&chip_clk CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			sata-phy@0 {
+				reg = <0>;
+			};
+
+			sata-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0xea0000 0x400>;
+
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2-soc-pinctrl";
+
+				emmc_pmux: emmc-pmux {
+					groups = "G26";
+					function = "emmc";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
+			};
+		};
+
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+			};
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <11>;
+				};
+			};
+
+			uart0: serial@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: serial@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@b000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xb000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <10>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart2_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: system-controller@d000 {
+				compatible = "simple-mfd", "syscon";
+				reg = <0xd000 0x100>;
+
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2-system-pinctrl";
+					uart0_pmux: uart0-pmux {
+						groups = "GSM4";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM5";
+						function = "uart1";
+					};
+					uart2_pmux: uart2-pmux {
+						groups = "GSM3";
+						function = "uart2";
+					};
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x400>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
new file mode 100644
index 000000000..56fa951bc
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Google Chromecast
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Google Chromecast";
+	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+
+		/*
+		 * We're using "linux,usable-memory" instead of "reg" here
+		 * because the (signed and encrypted) bootloader that shipped
+		 * with this device provides an incorrect memory range in
+		 * ATAG_MEM. Linux helpfully overrides the "reg" property with
+		 * data from the ATAG, so we can't specify the proper range
+		 * normally. Fortunately, this alternate property is checked
+		 * first by the OF driver, so we can (ab)use it instead.
+		 */
+		linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	leds {
+		compatible = "pwm-leds";
+		pinctrl-0 = <&ledpwm_pmux>;
+		pinctrl-names = "default";
+
+		white {
+			label = "white";
+			pwms = <&pwm 0 600000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "red";
+			pwms = <&pwm 1 600000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+	non-removable;
+	status = "okay";
+};
+
+&uart0 { status = "okay"; };
+
+&usb_phy1 { status = "okay"; };
+
+&usb1 { status = "okay"; };
+
+&soc_pinctrl {
+	ledpwm_pmux: ledpwm-pmux {
+		groups = "G0";
+		function = "pwm";
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
new file mode 100644
index 000000000..79ac842ae
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Alexander Monakov <amonakov@gmail.com>
+ */
+/dts-v1/;
+
+#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Valve Steam Link";
+	compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+		priority = <200>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&vcpu>;
+	operating-points = <
+		/* kHz    uV */
+		1000000 1325000
+	>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* There are two regulators on the board. One is accessible via I2C,
+	 * with buck1 providing SoC power (set up by bootloader to 1.325V or
+	 * less depending on leakage value in OTP), and buck2 likely used for
+	 * DRAM (providing 1.35V). The other regulator on the opposite side
+	 * of the board is probably supplying SDIO and NAND fixed voltages. */
+	regulator@19 {
+		compatible = "marvell,88pg868";
+		reg = <0x19>;
+
+		vcpu: buck1 {
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1325000>;
+		};
+	};
+};
+
+/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */
+&sdhci0 {
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	/* RX/TX are routed to TP50/TP51 on the board. */
+	status = "okay";
+};
+
+/* The SoC is connected to on-board USB hub that in turn has one downstream
+ * port wired to the on-board Steam Controller wireless receiver chip. */
+&usb_phy1 { status = "okay"; };
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&eth1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
new file mode 100644
index 000000000..6f30d7eb3
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ *  (c) Marvell International Ltd.
+ */
+
+#include <dt-bindings/clock/berlin2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 1500-mini (BG2CD) SoC";
+	compatible = "marvell,berlin2cd", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				800000  1200000
+				600000  1200000
+			>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc@f7000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+
+		sdhci0: mmc@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		l2: cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x100>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		global-timer@ad0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xad0200 0x20>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
+		local-wdt@ad0620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xad0620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
+		usb_phy0: usb-phy@b74000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip_rst 0x178 23>;
+			status = "disabled";
+		};
+
+		usb_phy1: usb-phy@b78000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip_rst 0x178 24>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip_clk CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip_clk CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1400 0x100>;
+				interrupts = <16>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@1800 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1800 0x100>;
+				interrupts = <17>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			spi0: spi@1c00 {
+				compatible = "snps,dw-apb-ssi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1c00 0x100>;
+				interrupts = <4>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <5>;
+				status = "disabled";
+			};
+
+			wdt5: watchdog@2400 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2400 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <6>;
+				status = "disabled";
+			};
+
+			wdt6: watchdog@2800 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2800 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				interrupts = <8>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				interrupts = <9>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				interrupts = <10>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				interrupts = <11>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				interrupts = <12>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				interrupts = <13>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				interrupts = <14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				interrupts = <15>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3000 0xc00>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0xea0000 0x400>;
+
+			chip_clk: clock {
+				compatible = "marvell,berlin2-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2cd-soc-pinctrl";
+
+				uart0_pmux: uart0-pmux {
+					groups = "G6";
+					function = "uart0";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
+			};
+		};
+
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x200>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x200>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			spi1: spi@6000 {
+				compatible = "snps,dw-apb-ssi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x6000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <5>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@7000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x7000 0x100>;
+				interrupts = <6>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@8000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x8000 0x100>;
+				interrupts = <7>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			uart0: serial@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: serial@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			uart2: serial@b000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xb000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <10>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			sysctrl: system-controller@d000 {
+				compatible = "simple-mfd", "syscon";
+				reg = <0xd000 0x100>;
+
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2cd-system-pinctrl";
+				};
+
+				adc: adc {
+					compatible = "marvell,berlin2-adc";
+					interrupts = <12>, <14>;
+					interrupt-names = "adc", "tsen";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x400>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
new file mode 100644
index 000000000..c162f98cb
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator_usb0 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator_usb1 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb2_vbus: regulator_usb2 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_sdio1_vmmc: regulator_sdio1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vmmc";
+			enable-active-high;
+			regulator-boot-on;
+			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
+			compatible = "regulator-gpio";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vqmmc";
+			regulator-type = "voltage";
+			enable-active-high;
+			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+			states = <3300000 0x1
+				  1800000 0x0>;
+		};
+	};
+};
+
+&soc_pinctrl {
+	sd1gpio_pmux: sd1pwr-pmux {
+		groups = "G23", "G32";
+		function = "gpio";
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&reg_sdio1_vmmc>;
+	vqmmc-supply = <&reg_sdio1_vqmmc>;
+	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy2 {
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb2 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
new file mode 100644
index 000000000..b6a0acac6
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc@f7000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		sdhci0: mmc@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: mmc@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: mmc@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
+			status = "disabled";
+		};
+
+		l2: cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,data-latency = <2 2 2>;
+			arm,tag-latency = <2 2 2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip_clk CLKID_TWD>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		usb_phy2: phy@a2f400 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xa2f400 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip_rst 0x104 14>;
+			status = "disabled";
+		};
+
+		usb2: usb@a30000 {
+			compatible = "chipidea,usb2";
+			reg = <0xa30000 0x10000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_USB2>;
+			phys = <&usb_phy2>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb_phy0: phy@b74000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip_rst 0x104 12>;
+			status = "disabled";
+		};
+
+		usb_phy1: phy@b78000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip_rst 0x104 13>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip_clk CLKID_GETH0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		cpu-ctrl@dd0000 {
+			compatible = "marvell,berlin-cpu-ctrl";
+			reg = <0xdd0000 0x10000>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1400 0x100>;
+				interrupts = <4>;
+				clocks = <&chip_clk CLKID_CFG>;
+				pinctrl-0 = <&twsi0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@1800 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1800 0x100>;
+				interrupts = <5>;
+				clocks = <&chip_clk CLKID_CFG>;
+				pinctrl-0 = <&twsi1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip_clk CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+
+			chip_clk: clock {
+				compatible = "marvell,berlin2q-clk";
+				#clock-cells = <1>;
+				clocks = <&refclk>;
+				clock-names = "refclk";
+			};
+
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2q-soc-pinctrl";
+
+				sd1_pmux: sd1-pmux {
+					groups = "G31";
+					function = "sd1";
+				};
+
+				twsi0_pmux: twsi0-pmux {
+					groups = "G6";
+					function = "twsi0";
+				};
+
+				twsi1_pmux: twsi1-pmux {
+					groups = "G7";
+					function = "twsi1";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
+			};
+		};
+
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin2q-ahci", "generic-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy 0>;
+				status = "disabled";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy 1>;
+				status = "disabled";
+			};
+		};
+
+		sata_phy: phy@e900a0 {
+			compatible = "marvell,berlin2q-sata-phy";
+			reg = <0xe900a0 0x200>;
+			clocks = <&chip_clk CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			sata-phy@0 {
+				reg = <0>;
+			};
+
+			sata-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip_clk CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+			};
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			i2c2: i2c@7000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x7000 0x100>;
+				interrupts = <6>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi2_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c3: i2c@8000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x8000 0x100>;
+				interrupts = <7>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi3_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "simple-mfd", "syscon";
+				reg = <0xd000 0x100>;
+
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2q-system-pinctrl";
+
+					uart0_pmux: uart0-pmux {
+						groups = "GSM12";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM14";
+						function = "uart1";
+					};
+
+					twsi2_pmux: twsi2-pmux {
+						groups = "GSM13";
+						function = "twsi2";
+					};
+
+					twsi3_pmux: twsi3-pmux {
+						groups = "GSM14";
+						function = "twsi3";
+					};
+				};
+
+				adc: adc {
+					compatible = "marvell,berlin2-adc";
+					interrupts = <12>, <14>;
+					interrupt-names = "adc", "tsen";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 000000000..f5e621671
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/ {
+	model = "CompuLab SB-SOM";
+	compatible = "compulab,sb-som";
+
+	vsb_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsb_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	lcd0: display {
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	hdmi_conn: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+	};
+};
diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
new file mode 100644
index 000000000..97e616f7b
--- /dev/null
+++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Thermistor dts fragment for devices that use Thermistors as
+ * children of the IIO based ADC.
+ *
+ * Currently, used by Exynos5420 based Peach PIT and
+ * Exynos5800 based Peach PI.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+*/
+
+&adc {
+	thermistor3 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 3>;
+	};
+	thermistor4 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 4>;
+	};
+	thermistor5 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 5>;
+	};
+	thermistor6 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 6>;
+	};
+};
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
new file mode 100644
index 000000000..165c5bcd5
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb";
+		keypad,num-rows = <8>;
+		keypad,num-columns = <13>;
+		google,needs-ghost-filter;
+
+		linux,keymap = <
+			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+			MATRIX_KEY(0x00, 0x02, KEY_F1)
+			MATRIX_KEY(0x00, 0x03, KEY_B)
+			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x05, KEY_RO)
+			MATRIX_KEY(0x00, 0x06, KEY_N)
+			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+			MATRIX_KEY(0x01, 0x01, KEY_ESC)
+			MATRIX_KEY(0x01, 0x02, KEY_F4)
+			MATRIX_KEY(0x01, 0x03, KEY_G)
+			MATRIX_KEY(0x01, 0x04, KEY_F7)
+			MATRIX_KEY(0x01, 0x06, KEY_H)
+			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+			MATRIX_KEY(0x01, 0x09, KEY_F9)
+			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
+
+			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+			MATRIX_KEY(0x02, 0x01, KEY_TAB)
+			MATRIX_KEY(0x02, 0x02, KEY_F3)
+			MATRIX_KEY(0x02, 0x03, KEY_T)
+			MATRIX_KEY(0x02, 0x04, KEY_F6)
+			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+			MATRIX_KEY(0x02, 0x06, KEY_Y)
+			MATRIX_KEY(0x02, 0x07, KEY_102ND)
+			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+			MATRIX_KEY(0x02, 0x09, KEY_F8)
+			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
+
+			MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)
+			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+			MATRIX_KEY(0x03, 0x02, KEY_F2)
+			MATRIX_KEY(0x03, 0x03, KEY_5)
+			MATRIX_KEY(0x03, 0x04, KEY_F5)
+			MATRIX_KEY(0x03, 0x06, KEY_6)
+			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x09, KEY_F13)
+			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
+
+			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			MATRIX_KEY(0x04, 0x01, KEY_A)
+			MATRIX_KEY(0x04, 0x02, KEY_D)
+			MATRIX_KEY(0x04, 0x03, KEY_F)
+			MATRIX_KEY(0x04, 0x04, KEY_S)
+			MATRIX_KEY(0x04, 0x05, KEY_K)
+			MATRIX_KEY(0x04, 0x06, KEY_J)
+			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+			MATRIX_KEY(0x04, 0x09, KEY_L)
+			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+			MATRIX_KEY(0x05, 0x01, KEY_Z)
+			MATRIX_KEY(0x05, 0x02, KEY_C)
+			MATRIX_KEY(0x05, 0x03, KEY_V)
+			MATRIX_KEY(0x05, 0x04, KEY_X)
+			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+			MATRIX_KEY(0x05, 0x06, KEY_M)
+			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+			MATRIX_KEY(0x05, 0x09, KEY_DOT)
+			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+			MATRIX_KEY(0x06, 0x01, KEY_1)
+			MATRIX_KEY(0x06, 0x02, KEY_3)
+			MATRIX_KEY(0x06, 0x03, KEY_4)
+			MATRIX_KEY(0x06, 0x04, KEY_2)
+			MATRIX_KEY(0x06, 0x05, KEY_8)
+			MATRIX_KEY(0x06, 0x06, KEY_7)
+			MATRIX_KEY(0x06, 0x08, KEY_0)
+			MATRIX_KEY(0x06, 0x09, KEY_9)
+			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+			MATRIX_KEY(0x07, 0x01, KEY_Q)
+			MATRIX_KEY(0x07, 0x02, KEY_E)
+			MATRIX_KEY(0x07, 0x03, KEY_R)
+			MATRIX_KEY(0x07, 0x04, KEY_W)
+			MATRIX_KEY(0x07, 0x05, KEY_I)
+			MATRIX_KEY(0x07, 0x06, KEY_U)
+			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+			MATRIX_KEY(0x07, 0x08, KEY_P)
+			MATRIX_KEY(0x07, 0x09, KEY_O)
+			MATRIX_KEY(0x07, 0x0b, KEY_UP)
+			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000..71f5c5ecc
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0xb>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
new file mode 100644
index 000000000..d2e8f36f8
--- /dev/null
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Device Tree Include file for the Conexant Digicolor CX92755 SoC
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cnxt,cx92755";
+
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	main_clk: main_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <200000000>;
+	};
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
+
+	rtc@f0000c30 {
+		compatible = "cnxt,cx92755-rtc";
+		reg = <0xf0000c30 0x18>;
+		interrupts = <25>;
+	};
+
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	uc_regs: syscon@f00003a0 {
+		compatible = "cnxt,cx92755-uc", "syscon";
+		reg = <0xf00003a0 0x10>;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+		status = "disabled";
+	};
+
+	uart1: uart@f0000760 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000760 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <45>;
+		status = "disabled";
+	};
+
+	uart2: uart@f0000780 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000780 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <46>;
+		status = "disabled";
+	};
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
new file mode 100644
index 000000000..026f556c8
--- /dev/null
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -0,0 +1,86 @@
+/*
+ * Device Tree file for the Conexant Equinox CX92755 EVK
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "cx92755.dtsi"
+
+/ {
+	model = "Conexant Equinox CX92755 EVK";
+	compatible = "cnxt,equinox", "cnxt,cx92755";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory@0 {
+		reg = <0 0x8000000>;
+		device_type = "memory";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_default>;
+	pinctrl-names = "default";
+};
+
+&i2c {
+	status = "okay";
+};
+
+&pinctrl {
+	uart0_default: uart0_active {
+		pins = "GP_O0", "GP_O1";
+		function = "client_b";
+	};
+};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
new file mode 100644
index 000000000..d4a5237ce
--- /dev/null
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "da850.dtsi"
+
+/ {
+	compatible = "enbw,cmc", "ti,da850";
+	model = "EnBW CMC";
+
+	soc@1c00000 {
+		serial0: serial@42000 {
+			status = "okay";
+		};
+		serial1: serial@10c000 {
+			status = "okay";
+		};
+		serial2: serial@10d000 {
+			status = "okay";
+		};
+		mdio: mdio@224000 {
+			status = "okay";
+		};
+		eth0: ethernet@220000 {
+			status = "okay";
+		};
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
new file mode 100644
index 000000000..87c517d65
--- /dev/null
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ti,da850-evm", "ti,da850";
+	model = "DA850/AM1808/OMAP-L138 EVM";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+		spi0 = &spi1;
+	};
+
+	backlight: backlight-pwm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+		power-supply = <&backlight_lcd>;
+		compatible = "pwm-backlight";
+		/*
+		 * The PWM here corresponds to production hardware. The
+		 * schematic needs to be 1015171 (15 March 2010), Rev A
+		 * or newer.
+		 */
+		pwms = <&ecap2 0 50000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		/*
+		 * The vpif and the LCD are mutually exclusive.
+		 * To enable VPIF, change the status below to 'disabled' then
+		 * then change the status of the vpif below to 'okay'
+		 */
+		status = "okay";
+		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <16>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <4>;
+				vsync-len = <11>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	backlight_lcd: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_backlight_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&ecap2 {
+	status = "okay";
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/*
+			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+			 * AFSR, AMUTE
+			 */
+			0x00 0x11111111 0xffffffff
+			/* AXR11, AXR12 */
+			0x04 0x00011000 0x000ff000
+		>;
+	};
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+			0x1c 0x10110110  0xf0ff0ff0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	tps: tps@48 {
+		reg = <0x48>;
+	};
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vdcdc2_reg>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
+	};
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tca6416_bb: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+		reg = <0>;
+		partition@0 {
+			label = "U-Boot-SPL";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+		partition@1 {
+			label = "U-Boot";
+			reg = <0x00010000 0x00080000>;
+			read-only;
+		};
+		partition@2 {
+			label = "U-Boot-Env";
+			reg = <0x00090000 0x00010000>;
+			read-only;
+		};
+		partition@3 {
+			label = "Kernel";
+			reg = <0x000a0000 0x00280000>;
+		};
+		partition@4 {
+			label = "Filesystem";
+			reg = <0x00320000 0x00400000>;
+		};
+		partition@5 {
+			label = "MAC-Address";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+	status = "okay";
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+	vdcdc1_2-supply = <&vbat>;
+	vdcdc3-supply = <&vbat>;
+	vldo1_2-supply = <&vbat>;
+
+	regulators {
+		vdcdc1_reg: regulator@0 {
+			regulator-name = "VDCDC1_3.3V";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdcdc2_reg: regulator@1 {
+			regulator-name = "VDCDC2_3.3V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		vdcdc3_reg: regulator@2 {
+			regulator-name = "VDCDC3_1.2V";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "LDO1_1.8V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "LDO2_1.2V";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 1
+		2 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "ok";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+	/*
+	 * The vpif and the LCD are mutually exclusive.
+	 * To enable VPIF, disable the ti,tilcdc,panel then
+	 * change the status below to 'okay'
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
new file mode 100644
index 000000000..e379d6e7a
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@c0000000 {
+		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@c3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xc3000000 0x1000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vcc_5vd: fixedregulator-vcc_5vd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5vd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vcc_3v3d: fixedregulator-vcc_3v3d {
+		/* TPS650250 - VDCDC1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3d";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8d: fixedregulator-vcc_1v8d {
+		/* TPS650250 - VDCDC2 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8d";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850-OMAPL138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"MIC3L", "Mic Jack",
+			"MIC3R", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		user1 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		user2 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	cvdd: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cvdd";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&cpu {
+	cpu-supply = <&cvdd>;
+};
+
+/*
+ * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are
+ * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we
+ * can't enable more than one OPP by default, since the controller sometimes
+ * becomes unresponsive after a transition. Fix the frequency at 456 MHz.
+ */
+
+&opp_100 {
+	status = "disabled";
+};
+
+&opp_200 {
+	status = "disabled";
+};
+
+&opp_300 {
+	status = "disabled";
+};
+
+&opp_456 {
+	status = "okay";
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vcc_3v3d>;
+		AVDD-supply = <&vcc_3v3d>;
+		DRVDD-supply = <&vcc_3v3d>;
+		DVDD-supply = <&vcc_1v8d>;
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@20000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
+
+&prictrl {
+	status = "okay";
+};
+
+&memctrl {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	port {
+		lcdc_out_vga: endpoint {
+			remote-endpoint = <&vga_bridge_in>;
+		};
+	};
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>;
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
new file mode 100644
index 000000000..afd04a423
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "da850.dtsi"
+
+/ {
+	compatible = "lego,ev3", "ti,da850";
+	model = "LEGO MINDSTORMS EV3";
+
+	aliases {
+		serial1 = &serial1;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x04000000>;
+	};
+
+	/*
+	 * The buttons on the EV3 are mapped to keyboard keys.
+	 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "EV3 Brick Buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_bias>;
+
+		center {
+			label = "Center";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
+		};
+
+		back {
+			label = "Back";
+			linux,code = <KEY_BACKSPACE>;
+			gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
+		};
+
+		right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
+		};
+
+		down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
+		};
+
+		up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/*
+	 * The EV3 has two built-in bi-color LEDs behind the buttons.
+	 */
+	leds {
+		compatible = "gpio-leds";
+
+		left_green {
+			label = "led0:green:brick-status";
+			/* GP6[13] */
+			gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		right_red {
+			label = "led1:red:brick-status";
+			/* GP6[7] */
+			gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		left_red {
+			label = "led0:red:brick-status";
+			/* GP6[12] */
+			gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		right_green {
+			label = "led1:green:brick-status";
+			/* GP6[14] */
+			gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	/*
+	 * The EV3 is powered down by turning off the main 5V supply.
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm0b_pins>;
+		pwms = <&ehrpwm0 1 1000000 0>;
+		amp-supply = <&amp>;
+	};
+
+	cvdd: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a 5V current limiting regulator that is shared by USB,
+	 * the sensor (input) ports, the motor (output) ports and the A/DC.
+	 */
+	vcc5v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 101 0>;
+		over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a simple voltage divider on VCC5V to provide a 2.5V
+	 * reference signal to the ADC.
+	 */
+	adc_ref: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "adc ref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v>;
+	};
+
+	/*
+	 * This is the amplifier for the speaker.
+	 */
+	amp: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "amp";
+		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/*
+	 * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
+	 */
+	battery {
+		compatible = "lego,ev3-battery";
+		io-channels = <&adc 4>, <&adc 3>;
+		io-channel-names = "voltage", "current";
+		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+	};
+
+	bt_slow_clk: bt-clock {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&ecap2 0 30518 0>;
+	};
+
+	/* ARM local RAM */
+	memory@ffff0000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0xffff0000 0x2000>; /* 8k */
+
+		/*
+		 * The I2C bootloader looks for this magic value to either
+		 * boot normally or boot into a firmware update mode.
+		 */
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1ffc>;
+			mode-normal = <0x00000000>;
+			mode-loader = <0x5555aaaa>;
+		};
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&cpu {
+	cpu-supply = <&cvdd>;
+};
+
+/* since we have a fixed regulator, we can't run at these points */
+&opp_100 {
+	status = "disabled";
+};
+
+&opp_200 {
+	status = "disabled";
+};
+
+/*
+ * The SoC is actually the 456MHz version, but because of the fixed regulator
+ * This is the fastest we can go.
+ */
+&opp_375 {
+	status = "okay";
+};
+
+&pmx_core {
+	status = "okay";
+
+	ev3_lcd_pins: pinmux_lcd {
+		pinctrl-single,bits = <
+			/* SIMO, CLK */
+			0x14 0x00100100 0x00f00f00
+		>;
+	};
+};
+
+&pinconf {
+	status = "okay";
+
+	/* Buttons have external pulldown resistors */
+	button_bias: button-bias-groups {
+		disable {
+			groups = "cp5", "cp24", "cp25", "cp28";
+			bias-disable;
+		};
+	};
+
+	bt_clock_bias: bt-clock-bias-groups {
+		disable {
+			groups = "cp2";
+			bias-disable;
+		};
+	};
+
+	bt_pic_bias: bt-pic-bias-groups {
+		disable {
+			groups = "cp20";
+			bias-disable;
+		};
+	};
+};
+
+/* Input port 1 */
+&serial1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial1_rxtx_pins>;
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,cc2560";
+		clocks = <&bt_slow_clk>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		nvmem-cells = <&bdaddr>;
+		nvmem-cell-names = "bd-address";
+	};
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	/*
+	 * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
+	 */
+	eeprom@50 {
+		compatible = "microchip,24c128", "atmel,24c128";
+		pagesize = <64>;
+		read-only;
+		reg = <0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bdaddr: bdaddr@3f06 {
+			reg = <0x3f06 0x06>;
+		};
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
+
+	flash@0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		ti,spi-wdelay = <8>;
+
+		/* Partitions are based on the official firmware from LEGO */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "U-Boot Env";
+				reg = <0x40000 0x10000>;
+			};
+
+			partition@50000 {
+				label = "Kernel";
+				reg = <0x50000 0x200000>;
+			};
+
+			partition@250000 {
+				label = "Filesystem";
+				reg = <0x250000 0xa50000>;
+			};
+
+			partition@cb0000 {
+				label = "Storage";
+				reg = <0xcb0000 0x2f0000>;
+			};
+		};
+	};
+
+	adc: adc@3 {
+		compatible = "ti,ads7957";
+		reg = <3>;
+		#io-channel-cells = <1>;
+		spi-max-frequency = <1000000>;
+		ti,spi-wdelay = <63>;
+		vref-supply = <&adc_ref>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&ev3_lcd_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+
+	display@0{
+		compatible = "lego,ev3-lcd";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ecap2 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+
+	/* Don't pull down battery voltage adc io channel */
+	batt_volt_en {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* Don't impede Bluetooth clock signal */
+	bt_clock_en {
+		gpio-hog;
+		gpios = <5 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+
+	/*
+	 * There is a PIC microcontroller for interfacing with an Apple MFi
+	 * chip. This interferes with normal Bluetooth operation, so we need
+	 * to make sure it is turned off. Note: The publicly available
+	 * schematics from LEGO don't show that these pins are connected to
+	 * anything, but they are present in the source code from LEGO.
+	 */
+
+	bt_pic_en {
+		gpio-hog;
+		gpios = <51 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	bt_pic_rst {
+		gpio-hog;
+		gpios = <78 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	bt_pic_cts {
+		gpio-hog;
+		gpios = <87 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&vcc5v>;
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
new file mode 100644
index 000000000..7cf31b6e4
--- /dev/null
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -0,0 +1,967 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&psc0 14>;
+			operating-points-v2 = <&opp_table>;
+		};
+	};
+
+	opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp_100: opp100-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000 950000 1050000>;
+		};
+
+		opp_200: opp110-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000 1050000 1160000>;
+		};
+
+		opp_300: opp120-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1200000 1140000 1320000>;
+		};
+
+		/*
+		 * Original silicon was 300MHz max, so higher frequencies
+		 * need to be enabled on a per-board basis if the chip is
+		 * capable.
+		 */
+
+		opp_375: opp120-375000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <375000000>;
+			opp-microvolt = <1200000 1140000 1320000>;
+		};
+
+		opp_456: opp130-456000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <1300000 1250000 1350000>;
+		};
+	};
+
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller@fffee000 {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <101>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
+	dsp: dsp@11800000 {
+		compatible = "ti,da850-dsp";
+		reg = <0x11800000 0x40000>,
+		      <0x11e00000 0x8000>,
+		      <0x11f00000 0x8000>,
+		      <0x01c14044 0x4>,
+		      <0x01c14174 0x8>;
+		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+		clocks = <&psc0 15>;
+		resets = <&psc0 15>;
+		status = "disabled";
+	};
+	soc@1c00000 {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		pmx_core: pinmux@14120 {
+			compatible = "pinctrl-single";
+			reg = <0x14120 0x50>;
+			#pinctrl-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range   0 17 0x8>,
+						    <&range  17  8 0x4>,
+						    <&range  26  8 0x4>,
+						    <&range  34 80 0x8>,
+						    <&range 129 31 0x8>;
+			status = "disabled";
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
+				>;
+			};
+			i2c0_pins: pinmux_i2c0_pins {
+				pinctrl-single,bits = <
+					/* I2C0_SDA,I2C0_SCL */
+					0x10 0x00002200 0x0000ff00
+				>;
+			};
+			i2c1_pins: pinmux_i2c1_pins {
+				pinctrl-single,bits = <
+					/* I2C1_SDA, I2C1_SCL */
+					0x10 0x00440000 0x00ff0000
+				>;
+			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
+			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+				pinctrl-single,bits = <
+					/* EPWM0A */
+					0xc 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+				pinctrl-single,bits = <
+					/* EPWM0B */
+					0xc 0x00000020 0x000000f0
+				>;
+			};
+			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+				pinctrl-single,bits = <
+					/* EPWM1A */
+					0x14 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+				pinctrl-single,bits = <
+					/* EPWM1B */
+					0x14 0x00000020 0x000000f0
+				>;
+			};
+			ecap0_pins: pinmux_ecap0_pins {
+				pinctrl-single,bits = <
+					/* ECAP0_APWM0 */
+					0x8 0x20000000 0xf0000000
+				>;
+			};
+			ecap1_pins: pinmux_ecap1_pins {
+				pinctrl-single,bits = <
+					/* ECAP1_APWM1 */
+					0x4 0x40000000 0xf0000000
+				>;
+			};
+			ecap2_pins: pinmux_ecap2_pins {
+				pinctrl-single,bits = <
+					/* ECAP2_APWM2 */
+					0x4 0x00000004 0x0000000f
+				>;
+			};
+			spi0_pins: pinmux_spi0_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0xc 0x00001101 0x0000ff0f
+				>;
+			};
+			spi0_cs0_pin: pinmux_spi0_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x10 0x00000010 0x000000f0
+				>;
+			};
+			spi0_cs3_pin: pinmux_spi0_cs3_pin {
+				pinctrl-single,bits = <
+					/* CS3 */
+					0xc 0x01000000 0x0f000000
+				>;
+			};
+			spi1_pins: pinmux_spi1_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0x14 0x00110100 0x00ff0f00
+				>;
+			};
+			spi1_cs0_pin: pinmux_spi1_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x14 0x00000010 0x000000f0
+				>;
+			};
+			mdio_pins: pinmux_mdio_pins {
+				pinctrl-single,bits = <
+					/* MDIO_CLK, MDIO_D */
+					0x10 0x00000088 0x000000ff
+				>;
+			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
+			lcd_pins: pinmux_lcd_pins {
+				pinctrl-single,bits = <
+					/*
+					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+					 * LCD_D[6], LCD_D[7]
+					 */
+					0x40 0x22222200 0xffffff00
+					/*
+					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+					 */
+					0x44 0x22222222 0xffffffff
+					/* LCD_D[8], LCD_D[9] */
+					0x48 0x00000022 0x000000ff
+
+					/* LCD_PCLK */
+					0x48 0x02000000 0x0f000000
+					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+					0x4c 0x02000022 0x0f0000ff
+				>;
+			};
+			vpif_capture_pins: vpif_capture_pins {
+				pinctrl-single,bits = <
+					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+					0x38 0x11111111 0xffffffff
+					/* VP_DIN[10..15,0..1] */
+					0x3c 0x11111111 0xffffffff
+					/* VP_DIN[8..9] */
+					0x40 0x00000011 0x000000ff
+				>;
+			};
+			vpif_display_pins: vpif_display_pins {
+				pinctrl-single,bits = <
+					/* VP_DOUT[2..7] */
+					0x40 0x11111100 0xffffff00
+					/* VP_DOUT[10..15,0..1] */
+					0x44 0x11111111 0xffffffff
+					/*  VP_DOUT[8..9] */
+					0x48 0x00000011 0x000000ff
+					/*
+					 * VP_CLKOUT3, VP_CLKIN3,
+					 * VP_CLKOUT2, VP_CLKIN2
+					 */
+					0x4c 0x00111100 0x00ffff00
+				>;
+			};
+		};
+		prictrl: priority-controller@14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+			status = "disabled";
+		};
+		cfgchip: chip-controller@1417c {
+			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+			reg = <0x1417c 0x14>;
+
+			usb_phy: usb-phy {
+				compatible = "ti,da830-usb-phy";
+				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
+				status = "disabled";
+			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
+		};
+		edma0: edma@0 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+			reg =	<0x0 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <11 12>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
+		};
+		edma0_tptc0: tptc@8000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8000 0x400>;
+			interrupts = <13>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
+		};
+		edma0_tptc1: tptc@8400 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8400 0x400>;
+			interrupts = <32>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
+		};
+		edma1: edma@230000 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+			reg =	<0x230000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <93 94>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
+		};
+		edma1_tptc0: tptc@238000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x238000 0x400>;
+			interrupts = <95>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
+		};
+		serial0: serial@42000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x42000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
+			status = "disabled";
+		};
+		serial1: serial@10c000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x10c000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
+			status = "disabled";
+		};
+		serial2: serial@10d000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			reg = <0x10d000 0x100>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
+			status = "disabled";
+		};
+		rtc0: rtc@23000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x23000 0x1000>;
+			interrupts = <19
+				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
+			status = "disabled";
+		};
+		i2c0: i2c@22000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x22000 0x1000>;
+			interrupts = <15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
+			status = "disabled";
+		};
+		i2c1: i2c@228000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x228000 0x1000>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
+			status = "disabled";
+		};
+		clocksource: timer@20000 {
+			compatible = "ti,da830-timer";
+			reg = <0x20000 0x1000>;
+			interrupts = <21>, <22>;
+			interrupt-names = "tint12", "tint34";
+			clocks = <&pll0_auxclk>;
+		};
+		wdt: wdt@21000 {
+			compatible = "ti,davinci-wdt";
+			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
+			status = "disabled";
+		};
+		mmc0: mmc@40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <16>;
+			dmas = <&edma0 16 0>, <&edma0 17 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
+			status = "disabled";
+		};
+		vpif: video@217000 {
+			compatible = "ti,da850-vpif";
+			reg = <0x217000 0x1000>;
+			interrupts = <92>;
+			power-domains = <&psc1 9>;
+			status = "disabled";
+
+			/* VPIF capture port */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* VPIF display port */
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+		mmc1: mmc@21b000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x21b000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <72>;
+			dmas = <&edma1 28 0>, <&edma1 29 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
+			status = "disabled";
+		};
+		ehrpwm0: pwm@300000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
+			status = "disabled";
+		};
+		ehrpwm1: pwm@302000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
+			status = "disabled";
+		};
+		ecap0: ecap@306000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		ecap1: ecap@307000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		ecap2: ecap@308000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		spi0: spi@41000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x41000 0x1000>;
+			num-cs = <6>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <20>;
+			dmas = <&edma0 14 0>, <&edma0 15 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
+			status = "disabled";
+		};
+		spi1: spi@30e000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x30e000 0x1000>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <56>;
+			dmas = <&edma0 18 0>, <&edma0 19 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
+			status = "disabled";
+		};
+		usb0: usb@200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x1000>;
+			ranges;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+				&cppi41dma 2 0 &cppi41dma 3 0
+				&cppi41dma 0 1 &cppi41dma 1 1
+				&cppi41dma 2 1 &cppi41dma 3 1>;
+			dma-names =
+				"rx1", "rx2", "rx3", "rx4",
+				"tx1", "tx2", "tx3", "tx4";
+
+			cppi41dma: dma-controller@201000 {
+				compatible = "ti,da830-cppi41";
+				reg =  <0x201000 0x1000
+					0x202000 0x1000
+					0x204000 0x4000>;
+				reg-names = "controller",
+					    "scheduler", "queuemgr";
+				interrupts = <58>;
+				#dma-cells = <2>;
+				#dma-channels = <4>;
+				power-domains = <&psc1 1>;
+				status = "okay";
+			};
+		};
+		sata: sata@218000 {
+			compatible = "ti,da850-ahci";
+			reg = <0x218000 0x2000>, <0x22c018 0x4>;
+			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
+			status = "disabled";
+		};
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		mdio: mdio@224000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
+			status = "disabled";
+		};
+		eth0: ethernet@220000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
+			status = "disabled";
+		};
+		usb1: usb@225000 {
+			compatible = "ti,da830-ohci";
+			reg = <0x225000 0x1000>;
+			interrupts = <59>;
+			phys = <&usb_phy 1>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
+			status = "disabled";
+		};
+		gpio: gpio@226000 {
+			compatible = "ti,dm6441-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x226000 0x1000>;
+			interrupts = <42 43 44 45 46 47 48 49 50>;
+			ti,ngpio = <144>;
+			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
+			status = "disabled";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx_core   0  15 1>,
+				      <&pmx_core   1  14 1>,
+				      <&pmx_core   2  13 1>,
+				      <&pmx_core   3  12 1>,
+				      <&pmx_core   4  11 1>,
+				      <&pmx_core   5  10 1>,
+				      <&pmx_core   6   9 1>,
+				      <&pmx_core   7   8 1>,
+				      <&pmx_core   8   7 1>,
+				      <&pmx_core   9   6 1>,
+				      <&pmx_core  10   5 1>,
+				      <&pmx_core  11   4 1>,
+				      <&pmx_core  12   3 1>,
+				      <&pmx_core  13   2 1>,
+				      <&pmx_core  14   1 1>,
+				      <&pmx_core  15   0 1>,
+				      <&pmx_core  16  39 1>,
+				      <&pmx_core  17  38 1>,
+				      <&pmx_core  18  37 1>,
+				      <&pmx_core  19  36 1>,
+				      <&pmx_core  20  35 1>,
+				      <&pmx_core  21  34 1>,
+				      <&pmx_core  22  33 1>,
+				      <&pmx_core  23  32 1>,
+				      <&pmx_core  24  24 1>,
+				      <&pmx_core  25  22 1>,
+				      <&pmx_core  26  21 1>,
+				      <&pmx_core  27  20 1>,
+				      <&pmx_core  28  19 1>,
+				      <&pmx_core  29  18 1>,
+				      <&pmx_core  30  17 1>,
+				      <&pmx_core  31  16 1>,
+				      <&pmx_core  32  55 1>,
+				      <&pmx_core  33  54 1>,
+				      <&pmx_core  34  53 1>,
+				      <&pmx_core  35  52 1>,
+				      <&pmx_core  36  51 1>,
+				      <&pmx_core  37  50 1>,
+				      <&pmx_core  38  49 1>,
+				      <&pmx_core  39  48 1>,
+				      <&pmx_core  40  47 1>,
+				      <&pmx_core  41  46 1>,
+				      <&pmx_core  42  45 1>,
+				      <&pmx_core  43  44 1>,
+				      <&pmx_core  44  43 1>,
+				      <&pmx_core  45  42 1>,
+				      <&pmx_core  46  41 1>,
+				      <&pmx_core  47  40 1>,
+				      <&pmx_core  48  71 1>,
+				      <&pmx_core  49  70 1>,
+				      <&pmx_core  50  69 1>,
+				      <&pmx_core  51  68 1>,
+				      <&pmx_core  52  67 1>,
+				      <&pmx_core  53  66 1>,
+				      <&pmx_core  54  65 1>,
+				      <&pmx_core  55  64 1>,
+				      <&pmx_core  56  63 1>,
+				      <&pmx_core  57  62 1>,
+				      <&pmx_core  58  61 1>,
+				      <&pmx_core  59  60 1>,
+				      <&pmx_core  60  59 1>,
+				      <&pmx_core  61  58 1>,
+				      <&pmx_core  62  57 1>,
+				      <&pmx_core  63  56 1>,
+				      <&pmx_core  64  87 1>,
+				      <&pmx_core  65  86 1>,
+				      <&pmx_core  66  85 1>,
+				      <&pmx_core  67  84 1>,
+				      <&pmx_core  68  83 1>,
+				      <&pmx_core  69  82 1>,
+				      <&pmx_core  70  81 1>,
+				      <&pmx_core  71  80 1>,
+				      <&pmx_core  72  70 1>,
+				      <&pmx_core  73  78 1>,
+				      <&pmx_core  74  77 1>,
+				      <&pmx_core  75  76 1>,
+				      <&pmx_core  76  75 1>,
+				      <&pmx_core  77  74 1>,
+				      <&pmx_core  78  73 1>,
+				      <&pmx_core  79  72 1>,
+				      <&pmx_core  80 103 1>,
+				      <&pmx_core  81 102 1>,
+				      <&pmx_core  82 101 1>,
+				      <&pmx_core  83 100 1>,
+				      <&pmx_core  84  99 1>,
+				      <&pmx_core  85  98 1>,
+				      <&pmx_core  86  97 1>,
+				      <&pmx_core  87  96 1>,
+				      <&pmx_core  88  95 1>,
+				      <&pmx_core  89  94 1>,
+				      <&pmx_core  90  93 1>,
+				      <&pmx_core  91  92 1>,
+				      <&pmx_core  92  91 1>,
+				      <&pmx_core  93  90 1>,
+				      <&pmx_core  94  89 1>,
+				      <&pmx_core  95  88 1>,
+				      <&pmx_core  96 158 1>,
+				      <&pmx_core  97 157 1>,
+				      <&pmx_core  98 156 1>,
+				      <&pmx_core  99 155 1>,
+				      <&pmx_core 100 154 1>,
+				      <&pmx_core 101 129 1>,
+				      <&pmx_core 102 113 1>,
+				      <&pmx_core 103 112 1>,
+				      <&pmx_core 104 111 1>,
+				      <&pmx_core 105 110 1>,
+				      <&pmx_core 106 109 1>,
+				      <&pmx_core 107 108 1>,
+				      <&pmx_core 108 107 1>,
+				      <&pmx_core 109 106 1>,
+				      <&pmx_core 110 105 1>,
+				      <&pmx_core 111 104 1>,
+				      <&pmx_core 112 145 1>,
+				      <&pmx_core 113 144 1>,
+				      <&pmx_core 114 143 1>,
+				      <&pmx_core 115 142 1>,
+				      <&pmx_core 116 141 1>,
+				      <&pmx_core 117 140 1>,
+				      <&pmx_core 118 139 1>,
+				      <&pmx_core 119 138 1>,
+				      <&pmx_core 120 137 1>,
+				      <&pmx_core 121 136 1>,
+				      <&pmx_core 122 135 1>,
+				      <&pmx_core 123 134 1>,
+				      <&pmx_core 124 133 1>,
+				      <&pmx_core 125 132 1>,
+				      <&pmx_core 126 131 1>,
+				      <&pmx_core 127 130 1>,
+				      <&pmx_core 128 159 1>,
+				      <&pmx_core 129  31 1>,
+				      <&pmx_core 130  30 1>,
+				      <&pmx_core 131  20 1>,
+				      <&pmx_core 132  28 1>,
+				      <&pmx_core 133  27 1>,
+				      <&pmx_core 134  26 1>,
+				      <&pmx_core 135  23 1>,
+				      <&pmx_core 136 153 1>,
+				      <&pmx_core 137 152 1>,
+				      <&pmx_core 138 151 1>,
+				      <&pmx_core 139 150 1>,
+				      <&pmx_core 140 149 1>,
+				      <&pmx_core 141 148 1>,
+				      <&pmx_core 142 147 1>,
+				      <&pmx_core 143 146 1>;
+		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
+		pinconf: pin-controller@22c00c {
+			compatible = "ti,da850-pupd";
+			reg = <0x22c00c 0x8>;
+			status = "disabled";
+		};
+
+		mcasp0: mcasp@100000 {
+			compatible = "ti,da830-mcasp-audio";
+			reg = <0x100000 0x2000>,
+			      <0x102000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <54>;
+			interrupt-names = "common";
+			power-domains = <&psc1 7>;
+			status = "disabled";
+			dmas = <&edma0 1 1>,
+				<&edma0 0 1>;
+			dma-names = "tx", "rx";
+		};
+
+		lcdc: display@213000 {
+			compatible = "ti,da850-tilcdc";
+			reg = <0x213000 0x1000>;
+			interrupts = <52>;
+			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
+			status = "disabled";
+		};
+	};
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
+		status = "disabled";
+	};
+	memctrl: memory-controller@b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi
new file mode 100644
index 000000000..d24e906a1
--- /dev/null
+++ b/arch/arm/boot/dts/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
new file mode 100644
index 000000000..91d1018ab
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DM8148 EVM";
+	compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc1 {
+        status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+        status = "disabled";
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
new file mode 100644
index 000000000..79ccdd447
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+	model = "HP t410 Smart Zero Client";
+	compatible = "hp,t410", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* gpio9 seems to control USB VBUS regulator and/or hub power */
+	usb_power: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
+		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
+	dma-names = "tx", "rx";
+	non-removable;
+};
+
+&pincntl {
+	sd2_pins: pinmux_sd2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
+			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
+			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
+			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
+			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
+			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
+			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
+			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
+			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
+			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
+			DM814X_IOPAD(0x0920, PIN_INPUT | 0x40)	/* SD2_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
new file mode 100644
index 000000000..f7939f434
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
+&pllss_clocks {
+	timer1_fck: timer1_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_fck: timer2_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	sysclk18_ck: sysclk18_ck@2f0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x02f0>;
+	};
+};
+
+&scm_clocks {
+	devosc_ck: devosc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0040>;
+	};
+
+	/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22572900>;
+	};
+
+	/* Optional 32768Hz crystal or clock on RTCOSC pins */
+	rtcosc_ck: rtcosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <1000000000>;
+	};
+};
+
+&prcm_clocks {
+	osc_src_ck: osc_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mpu_clksrc_ck: mpu_clksrc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&devosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0040>;
+	};
+
+	/* Fixed divider clock 0.0016384 * devosc */
+	rtcdivider_ck: rtcdivider_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <128>;
+		clock-div = <78125>;
+	};
+
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
+	aud_clkin0_ck: aud_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin1_ck: aud_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin2_ck: aud_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+};
+
+&prcm {
+	default_cm: default_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		default_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_cm: alwon_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x300>;
+
+		alwon_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x228>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
+		compatible = "ti,omap4-cm";
+		reg = <0x15d4 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x15d4 0x4>;
+
+		alwon_ethernet_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
new file mode 100644
index 000000000..7702e048e
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -0,0 +1,789 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/dm814x.h>
+
+/ {
+	compatible = "ti,dm814";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		/*
+		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+		 * It shows the module target agent registers though, so the
+		 * actual device is typically 0x1000 before the target agent
+		 * except in cases where the module is larger than 0x1000.
+		 */
+		l4ls: l4ls@48000000 {
+			compatible = "ti,dm814-l4ls", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x2000000>;
+
+			i2c1: i2c@28000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c1";
+				reg = <0x28000 0x1000>;
+				interrupts = <70>;
+			};
+
+			elm: elm@80000 {
+				compatible = "ti,814-elm";
+				ti,hwmods = "elm";
+				reg = <0x80000 0x2000>;
+				interrupts = <4>;
+			};
+
+			gpio1: gpio@32000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio1";
+				ti,gpio-always-on;
+				reg = <0x32000 0x2000>;
+				interrupts = <96>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@4c000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio2";
+				ti,gpio-always-on;
+				reg = <0x4c000 0x2000>;
+				interrupts = <98>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@1ac000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio3";
+				ti,gpio-always-on;
+				reg = <0x1ac000 0x2000>;
+				interrupts = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@1ae000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio4";
+				ti,gpio-always-on;
+				reg = <0x1ae000 0x2000>;
+				interrupts = <62>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c2: i2c@2a000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c2";
+				reg = <0x2a000 0x1000>;
+				interrupts = <71>;
+			};
+
+			mcspi1: spi@30000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x30000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <65>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi1";
+				dmas = <&edma 16 0 &edma 17 0
+					&edma 18 0 &edma 19 0
+					&edma 20 0 &edma 21 0
+					&edma 22 0 &edma 23 0>;
+
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					"tx2", "rx2", "tx3", "rx3";
+			};
+
+			mcspi2: spi@1a0000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a0000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <125>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi2";
+				dmas = <&edma 42 0 &edma 43 0
+					&edma 44 0 &edma 45 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+
+			/* Board must configure dmas with edma_xbar for EDMA */
+			mcspi3: spi@1a2000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <126>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi3";
+			};
+
+			mcspi4: spi@1a4000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a4000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <127>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi4";
+			};
+
+			timer1_target: target-module@2e000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x2e000 0x4>,
+				      <0x2e010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2e000 0x1000>;
+
+				timer1: timer@0 {
+					compatible = "ti,am335x-timer-1ms";
+					reg = <0x0 0x400>;
+					interrupts = <67>;
+					ti,timer-alwon;
+					clocks = <&timer1_fck>;
+					clock-names = "fck";
+				};
+			};
+
+			uart1: uart@20000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart1";
+				reg = <0x20000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <72>;
+				dmas = <&edma 26 0 &edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart2: uart@22000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart2";
+				reg = <0x22000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <73>;
+				dmas = <&edma 28 0 &edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart3: uart@24000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart3";
+				reg = <0x24000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <74>;
+				dmas = <&edma 30 0 &edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+
+			timer2_target: target-module@40000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x40000 0x4>,
+				      <0x40010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x40000 0x1000>;
+
+				timer2: timer@0 {
+					compatible = "ti,dm814-timer";
+					reg = <0 0x1000>;
+					interrupts = <68>;
+					clocks = <&timer2_fck>;
+					clock-names = "fck";
+				};
+			};
+
+			timer3: timer@42000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x42000 0x2000>;
+				interrupts = <69>;
+				ti,hwmods = "timer3";
+			};
+
+			mmc1: mmc@60000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc1";
+				dmas = <&edma 24 0
+					&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				interrupt-parent = <&intc>;
+				reg = <0x60000 0x1000>;
+			};
+
+			rtc: rtc@c0000 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0xc0000 0x1000>;
+				interrupts = <75 76>;
+				ti,hwmods = "rtc";
+			};
+
+			mmc2: mmc@1d8000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc2";
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				interrupt-parent = <&intc>;
+				reg = <0x1d8000 0x1000>;
+			};
+
+			control: control@140000 {
+				compatible = "ti,dm814-scm", "simple-bus";
+				reg = <0x140000 0x20000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x140000 0x20000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x800>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dm814-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <1>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+
+					scm_clockdomains: clockdomains {
+					};
+				};
+
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10
+						0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				/*
+				 * Note that silicon revision 2.1 and older
+				 * require input enabled (bit 18 set) for all
+				 * 3.3V I/Os to avoid cumulative hardware damage.
+				 * For more info, see errata advisory 2.1.87.
+				 * We leave bit 18 out of function-mask and rely
+				 * on the bootloader for it.
+				 */
+				pincntl: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x438>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x307ff>;
+				};
+
+				usb1_phy: usb-phy@1b00 {
+					compatible = "ti,am335x-usb-phy";
+					reg = <0x1b00 0x100>;
+					reg-names = "phy";
+					ti,ctrl_mod = <&usb_ctrl_mod>;
+					#phy-cells = <0>;
+				};
+			};
+
+			prcm: prcm@180000 {
+				compatible = "ti,dm814-prcm", "simple-bus";
+				reg = <0x180000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x180000 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
+			pllss: pllss@1c5000 {
+				compatible = "ti,dm814-pllss", "simple-bus";
+				reg = <0x1c5000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1c5000 0x1000>;
+
+				pllss_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				pllss_clockdomains: clockdomains {
+				};
+			};
+
+			wdt1: wdt@1c7000 {
+				compatible = "ti,omap3-wdt";
+				ti,hwmods = "wd_timer";
+				reg = <0x1c7000 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm814-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		/* Board must configure evtmux with edma_xbar for EDMA */
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		/* See TRM "Table 1-318. L4HS Instance Summary" */
+		l4hs: l4hs@4a000000 {
+			compatible = "ti,dm814-l4hs", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a000000 0x1b4040>;
+
+			target-module@100000 {
+				compatible = "ti,sysc-omap4-simple", "ti,sysc";
+				reg = <0x100900 0x4>,
+				      <0x100908 0x4>,
+				      <0x100904 0x4>;
+				reg-names = "rev", "sysc", "syss";
+				ti,sysc-mask = <0>;
+				ti,sysc-midle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,syss-mask = <1>;
+				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x100000 0x8000>;
+
+				mac: ethernet@0 {
+					compatible = "ti,cpsw";
+					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+					clock-names = "fck", "cpts";
+					cpdma_channels = <8>;
+					ale_entries = <1024>;
+					bd_ram_size = <0x2000>;
+					mac_control = <0x20>;
+					slaves = <2>;
+					active_slave = <0>;
+					cpts_clock_mult = <0x80000000>;
+					cpts_clock_shift = <29>;
+					reg = <0 0x800>,
+					      <0x900 0x100>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/*
+					* c0_rx_thresh_pend
+					* c0_rx_pend
+					* c0_tx_pend
+					* c0_misc_pend
+					*/
+					interrupts = <40 41 42 43>;
+					ranges = <0 0 0x8000>;
+					syscon = <&scm_conf>;
+
+					davinci_mdio: mdio@800 {
+						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+						clocks = <&cpsw_125mhz_gclk>;
+						clock-names = "fck";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						bus_freq = <1000000>;
+						reg = <0x800 0x100>;
+					};
+
+					cpsw_emac0: slave@200 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_emac1: slave@300 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+#include "dm814x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
new file mode 100644
index 000000000..cf05d532d
--- /dev/null
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DM8168 EVM";
+	compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000	/* 1 GB */
+		       0xc0000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* FDC6331L controlled by SD_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sata_refclk: fixedclock0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
+
+&dm816x_pinmux {
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a94, MUX_MODE0)			/* SPI_SCLK */
+			DM816X_IOPAD(0x0a98, MUX_MODE0)			/* SPI_SCS0 */
+			DM816X_IOPAD(0x0aa8, MUX_MODE0)			/* SPI_D0 */
+			DM816X_IOPAD(0x0aac, MUX_MODE0)			/* SPI_D1 */
+		>;
+	};
+
+	mmc_pins: pinmux_mmc_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a70, MUX_MODE0)			/* SD_POW */
+			DM816X_IOPAD(0x0a74, MUX_MODE0)			/* SD_CLK */
+			DM816X_IOPAD(0x0a78, MUX_MODE0)			/* SD_CMD */
+			DM816X_IOPAD(0x0a7C, MUX_MODE0)			/* SD_DAT0 */
+			DM816X_IOPAD(0x0a80, MUX_MODE0)			/* SD_DAT1 */
+			DM816X_IOPAD(0x0a84, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a88, MUX_MODE0)			/* SD_DAT2 */
+			DM816X_IOPAD(0x0a8c, MUX_MODE2)			/* GP1[7] */
+			DM816X_IOPAD(0x0a90, MUX_MODE2)			/* GP1[8] */
+		>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d04, MUX_MODE0)			/* USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
+		>;
+	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
+			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
+			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
+			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
+			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
+			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
+			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
+			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
+			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
+			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
+			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
+			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
+			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
+			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
+			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
+			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
+			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
+			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
+			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
+			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
+			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
+			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
+			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
+		>;
+	};
+};
+
+&i2c1 {
+	extgpio0: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	extgpio1: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	m25p80@0 {
+		compatible = "w25x32";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+};
+
+/* At least dm8168-evm rev c won't support multipoint, later may */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	mentor,multipoint = <0>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	mentor,multipoint = <0>;
+};
+
+&sata {
+	clocks = <&sysclk5_ck>, <&sata_refclk>;
+};
diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi
new file mode 100644
index 000000000..338449b32
--- /dev/null
+++ b/arch/arm/boot/dts/dm816x-clocks.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&scrm {
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
+
+	ddr_fapll: ddr_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x440 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>;
+		clock-output-names = "ddr_pll_clk1",
+				     "ddr_pll_clk2",
+				     "ddr_pll_clk3",
+				     "ddr_pll_clk4";
+	};
+
+	video_fapll: video_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x470 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>;
+		clock-output-names = "video_pll_clk1",
+				     "video_pll_clk2",
+				     "video_pll_clk3";
+	};
+
+	audio_fapll: audio_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x4a0 0x30>;
+		clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>;
+		clock-output-names = "audio_pll_clk1",
+				     "audio_pll_clk2",
+				     "audio_pll_clk3",
+				     "audio_pll_clk4",
+				     "audio_pll_clk5";
+	};
+};
+
+&scrm_clocks {
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+	clkout_pre_ck: clkout_pre_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+			  &audio_fapll 1>;
+		reg = <0x100>;
+	};
+
+	clkout_div_ck: clkout_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x100>;
+	};
+
+	clkout_ck: clkout_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x100>;
+	};
+
+	/* CM_DPLL clocks p1795 */
+	sysclk1_ck: sysclk1_ck@300 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x0300>;
+	};
+
+	sysclk2_ck: sysclk2_ck@304 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0304>;
+	};
+
+	sysclk3_ck: sysclk3_ck@308 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 3>;
+		ti,max-div = <7>;
+		reg = <0x0308>;
+	};
+
+	sysclk4_ck: sysclk4_ck@30c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,max-div = <1>;
+		reg = <0x030c>;
+	};
+
+	sysclk5_ck: sysclk5_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclk4_ck>;
+		ti,max-div = <1>;
+		reg = <0x0310>;
+	};
+
+	sysclk6_ck: sysclk6_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,dividers = <2>, <4>;
+		reg = <0x0314>;
+	};
+
+	sysclk10_ck: sysclk10_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&ddr_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0324>;
+	};
+
+	sysclk24_ck: sysclk24_ck@3b4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 5>;
+		ti,max-div = <7>;
+		reg = <0x03b4>;
+	};
+
+	mpu_ck: mpu_ck@15dc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sysclk2_ck>;
+		ti,bit-shift = <1>;
+                reg = <0x15dc>;
+	};
+
+	audio_pll_a_ck: audio_pll_a_ck@35c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&audio_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x035c>;
+	};
+
+	sysclk18_ck: sysclk18_ck@378 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+		reg = <0x0378>;
+	};
+
+	timer1_fck: timer1_fck@390 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0390>;
+	};
+
+	timer2_fck: timer2_fck@394 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0394>;
+	};
+
+	timer3_fck: timer3_fck@398 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0398>;
+	};
+
+	timer4_fck: timer4_fck@39c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x039c>;
+	};
+
+	timer5_fck: timer5_fck@3a0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a0>;
+	};
+
+	timer6_fck: timer6_fck@3a4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a4>;
+	};
+
+	timer7_fck: timer7_fck@3a8 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a8>;
+	};
+};
+
+&prcm {
+	default_cm: default_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		default_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_cm: alwon_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x300>;
+
+		alwon_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x208>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
new file mode 100644
index 000000000..1825d912b
--- /dev/null
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -0,0 +1,696 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+	compatible = "ti,dm816";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the dm816x interconnect.
+	 * The real dm816x interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		reg = <0x44000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		prcm: prcm@48180000 {
+			compatible = "ti,dm816-prcm", "simple-bus";
+			reg = <0x48180000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48180000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48140000 {
+			compatible = "ti,dm816-scrm", "simple-bus";
+			reg = <0x48140000 0x21000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#pinctrl-cells = <1>;
+			ranges = <0 0x48140000 0x21000>;
+
+			dm816x_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon@600 {
+				compatible = "syscon", "simple-bus";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x600 0x110>;
+
+				usb_phy0: usb-phy@20 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x20 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+
+				usb_phy1: usb-phy@28 {
+					compatible = "ti,dm8168-usb-phy";
+					reg = <0x28 0x8>;
+					reg-names = "phy";
+					clocks = <&main_fapll 6>;
+					clock-names = "refclk";
+					#phy-cells = <0>;
+					syscon = <&scm_conf>;
+				};
+			};
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			ti,hwmods = "elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+		};
+
+		gpio1: gpio@48032000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			reg = <0x48032000 0x1000>;
+			interrupts = <96>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4804c000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			reg = <0x4804c000 0x1000>;
+			interrupts = <98>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <100>;
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <6>;
+			gpmc,num-waitpins = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		i2c1: i2c@48028000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <70>;
+			dmas = <&edma 58 0 &edma 59 0>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <71>;
+			dmas = <&edma 60 0 &edma 61 0>;
+			dma-names = "tx", "rx";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm816-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		rtc: rtc@480c0000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x480c0000 0x1000>;
+			interrupts = <75 76>;
+			ti,hwmods = "rtc";
+		};
+
+		mailbox: mailbox@480c8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480c8000 0x2000>;
+			interrupts = <77>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			mbox_dsp: mbox-dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <0 0 0>;
+			};
+		};
+
+		spinbox: spinbox@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x2000>;
+			ti,hwmods = "spinbox";
+			#hwlock-cells = <1>;
+		};
+
+		mdio: mdio@4a100800 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a100800 0x100>;
+			ti,hwmods = "davinci_mdio";
+			bus_freq = <1000000>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <2>;
+			};
+		};
+
+		eth0: ethernet@4a100000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac0";
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x3700>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <40 41 42 43>;
+			phy-handle = <&phy0>;
+		};
+
+		eth1: ethernet@4a120000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac1";
+			reg = <0x4a120000 0x4000>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <44 45 46 47>;
+			phy-handle = <&phy1>;
+		};
+
+		sata: sata@4a140000 {
+			compatible = "ti,dm816-ahci";
+			reg = <0x4a140000 0x10000>;
+			interrupts = <16>;
+			ti,hwmods = "sata";
+		};
+
+		mcspi1: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48030000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <65>;
+			ti,spi-num-cs = <4>;
+			ti,hwmods = "mcspi1";
+			dmas = <&edma 16 0 &edma 17 0
+				&edma 18 0 &edma 19 0
+				&edma 20 0 &edma 21 0
+				&edma 22 0 &edma 23 0>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x11000>;
+			ti,hwmods = "mmc1";
+			interrupts = <64>;
+			dmas = <&edma 24 0 &edma 25 0>;
+			dma-names = "tx", "rx";
+		};
+
+		timer1_target: target-module@4802e000 {
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4802e000 0x4>,
+			      <0x4802e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4802e000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,dm816-timer";
+				reg = <0 0x1000>;
+				interrupts = <67>;
+				ti,timer-alwon;
+				clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+				clock-names = "fck";
+			};
+		};
+
+		timer2_target: target-module@48040000 {
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48040000 0x4>,
+			      <0x48040010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48040000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,dm816-timer";
+				reg = <0 0x1000>;
+				interrupts = <68>;
+				clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+				clock-names = "fck";
+			};
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48042000 0x2000>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48044000 0x2000>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48046000 0x2000>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48048000 0x2000>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4804a000 0x2000>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		uart1: uart@48020000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			reg = <0x48020000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <72>;
+			dmas = <&edma 26 0 &edma 27 0>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: uart@48022000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			reg = <0x48022000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <73>;
+			dmas = <&edma 28 0 &edma 29 0>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: uart@48024000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			reg = <0x48024000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <74>;
+			dmas = <&edma 30 0 &edma 31 0>;
+			dma-names = "tx", "rx";
+		};
+
+		/* NOTE: USB needs a transceiver driver for phys to work */
+		usb: usb_otg_hs@47401000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47401000 0x400000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-dm816";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy0>;
+				phy-names = "usb2-phy";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-dm816";
+				reg = <0x47401c00 0x400
+				       0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "host";
+				interface-type = <0>;
+				phys = <&usb_phy1>;
+				phy-names = "usb2-phy";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
+		wd_timer2: wd_timer@480c2000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer";
+			reg = <0x480c2000 0x1000>;
+			interrupts = <0>;
+		};
+	};
+};
+
+#include "dm816x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
new file mode 100644
index 000000000..9b9dfbe07
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -0,0 +1,195 @@
+/*
+ * Device Tree include for Compulab CM-A510 System-on-Module
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The CM-A510 comes with several optional components:
+ *
+ * Memory options:
+ *  D512: 512M
+ *  D1024: 1G
+ *
+ * NAND options:
+ *  N512: 512M NAND
+ *
+ * Ethernet options:
+ *  E1: PHY RTL8211D on internal GbE (SMI address 0x03)
+ *  E2: Additional ethernet NIC RTL8111D on PCIe1
+ *
+ * Audio options:
+ *  A: TI TLV320AIC23b audio codec (I2C address 0x1a)
+ *
+ * Touchscreen options:
+ *  I: TI TSC2046 touchscreen controller (on SPI1)
+ *
+ * USB options:
+ *  U2: 2 dual-role USB2.0 ports
+ *  U4: 2 additional USB2.0 host ports (via USB1)
+ *
+ * WiFi options:
+ *  W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
+ *
+ * GPIOs used on CM-A510:
+ *   1 GbE PHY reset (active low)
+ *   3 WakeUp
+ *   8 PowerOff (active low)
+ *  13 Touchscreen pen irq (active low)
+ *  65 System LED (active high)
+ *  69 USB Hub reset (active low)
+ *  70 WLAN reset (active low)
+ *  71 WLAN regulator (active high)
+ */
+
+#include "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	/*
+	 * Set the minimum memory size here and let the
+	 * bootloader set the real size.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/* Set upper NAND data bit to GPO */
+		pinctrl-0 = <&pmx_nand_gpo>;
+		pinctrl-names = "default";
+
+		system {
+			label = "cm-a510:system:green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wifi_power: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "WiFi Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Optional RTL8211D GbE PHY on SMI address 0x03 */
+&ethphy {
+	reg = <3>;
+	status = "disabled";
+};
+
+&i2c0 {
+	/* Optional TI TLV320AIC23b audio codec */
+	opt_audio: audio@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+/* Optional RTL8111D GbE NIC on PCIe1 */
+&pcie { status = "disabled"; };
+
+&pcie1 {
+	pinctrl-0 = <&pmx_pcie1_clkreq>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&pinctrl {
+	pmx_uart2: pmx-uart2 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "uart2";
+	};
+};
+
+/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
+&sdio1 {
+	non-removable;
+	vmmc-supply = <&wifi_power>;
+	reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* 1M Flash Winbond W25Q80BL */
+	flash@0 {
+		compatible = "winbond,w25q80";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&pmx_spi1_20_23>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	/* Optional TI TSC2046 touchscreen controller */
+	opt_touch: touchscreen@0 {
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <2500000>;
+		reg = <0>;
+		pinctrl-0 = <&pmx_gpio_13>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&pmx_uart2>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
new file mode 100644
index 000000000..ad361ec13
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "dove-cubox.dts"
+
+/ {
+	model = "SolidRun CuBox (Engineering Sample)";
+	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+	/* sdio0 card detect is connected to wrong pin on CuBox ES */
+	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 000000000..3e1584e78
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_18>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
+		};
+	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
+
+	gpu-subsystem {
+		status = "okay";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+		clock-names = "xtal";
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
new file mode 100644
index 000000000..273f12ca2
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
new file mode 100644
index 000000000..826026c28
--- /dev/null
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	spi-flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie@2 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
new file mode 100644
index 000000000..1754a62e0
--- /dev/null
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts
new file mode 100644
index 000000000..2bb85a9b7
--- /dev/null
+++ b/arch/arm/boot/dts/dove-sbc-a510.dts
@@ -0,0 +1,182 @@
+/*
+ * Device Tree file for Compulab SBC-A510 Single Board Computer
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
+ *
+ * 0.0 USB0 VBUS_EN (active high)
+ * 0.1 USB0 VBUS_GOOD
+ * 0.2 DVI transmitter TI TFP410 MSEN
+ * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
+ * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
+ * 0.5 LCD nRST (active low reset)
+ * 0.6 PCIe0 nRST (active low reset)
+ * 0.7 mini-PCIe slot W_DISABLE#
+ *
+ * 1.0 MMC WP
+ * 1.1 Camera Input FPC FLASH_STB and P21.5
+ * 1.2 Camera Input FPC WE        and P21.22
+ * 1.3 MMC VCC_EN (active high)   and P21.7
+ * 1.4 Camera Input FPC AFTR_RST  and P21.17
+ * 1.5 Camera Input FPC OE        and P21.19
+ * 1.6 Camera Input FPC SNPSHT    and P21.6
+ * 1.7 Camera Input FPC SHTR      and P21.10
+ */
+
+/dts-v1/;
+
+#include "dove-cm-a510.dtsi"
+
+/ {
+	model = "Compulab SBC-A510";
+	compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	regulators {
+		usb0_power: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		mmc_power: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "MMC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Ethernet0 depends on CM-A510 option E1 */
+&mdio { status = "disabled"; };
+&eth { status = "disabled"; };
+&ethphy { status = "disabled"; };
+
+/*
+ * USB port 0 can be powered and monitored by I2C GPIO expander:
+ *  VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
+ */
+&ehci0 {
+	status = "okay";
+	vbus-supply = <&usb0_power>;
+};
+
+/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
+&ehci1 { status = "okay"; };
+
+/*
+ * I2C bus layout:
+ * i2c0:
+ *  - Audio Codec, 0x1a (option from CM-A510)
+ *  - DVI transmitter TI TFP410, 0x39
+ *  - HDMI/DVI DDC channel
+ * i2c1:
+ *  - GPIO expander, NXP PCA9555, 0x20
+ *  - VGA DDC channel
+ */
+&i2c {
+	pinctrl-0 = <&pmx_i2c1>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	/* TI TFP410 DVI transmitter */
+	dvi: video@39 {
+		compatible = "ti,tfp410";
+		reg = <0x39>;
+		powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* NXP PCA9555 GPIO expander */
+	gpio_ext: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie { status = "okay"; };
+
+/*
+ * PCIe0 can be configured by Jumper E1 to be either connected to
+ * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
+ */
+&pcie0 {
+	status = "okay";
+	pinctrl-0 = <&pmx_pcie0_clkreq>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+};
+
+/* Ethernet1 depends on CM-A510 option E2 */
+&pcie1 { status = "disabled"; };
+
+/* SATA connector */
+&sata0 { status = "okay"; };
+
+/*
+ * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
+ *  VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
+ */
+&sdio0 {
+	vmmc-supply = <&mmc_power>;
+	wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* UART0 on RS232 mini-connector */
+&uart0 { status = "okay"; };
+/* UART2 on pin headers */
+&uart2 { status = "okay"; };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
new file mode 100644
index 000000000..726d353ed
--- /dev/null
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+	};
+
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
+
+	gpu-subsystem {
+		compatible = "marvell,dove-gpu-subsystem";
+		cores = <&gpu>;
+		status = "disabled";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c>;
+
+		pinctrl-names = "i2c0", "i2c1", "i2c2";
+		pinctrl-0 = <&pmx_i2cmux_0>;
+		pinctrl-1 = <&pmx_i2cmux_1>;
+		pinctrl-2 = <&pmx_i2cmux_2>;
+
+		i2c0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		i2c1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c1 on i2c controller node */
+			status = "disabled";
+		};
+
+		i2c2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c2 on i2c controller node */
+			status = "disabled";
+		};
+	};
+
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
+
+		pcie: pcie {
+			compatible = "marvell,dove-pcie";
+			status = "disabled";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+			pcie0: pcie@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 16>;
+			};
+
+			pcie1: pcie@2 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 18>;
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				clocks = <&core_clk 0>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
+			};
+
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
+
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+			};
+
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,dove-crypto";
+				reg = <0x30000 0x10000>;
+				reg-names = "regs";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
+
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					/* set phy address in board file */
+				};
+			};
+
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				phys = <&sata_phy0>;
+				phy-names = "port0";
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			sata_phy0: sata-phy@a2000 {
+				compatible = "marvell,mvebu-sata-phy";
+				reg = <0xa2000 0x0334>;
+				clocks = <&gate_clk 3>;
+				clock-names = "sata";
+				#phy-cells = <0>;
+				status = "ok";
+			};
+
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			pmu: power-management@d0000 {
+				compatible = "marvell,dove-pmu", "simple-bus";
+				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+				ranges = <0x00000000 0x000d0000 0x8000
+					  0x00008000 0x000d8000 0x8000>;
+				interrupts = <33>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#interrupt-cells = <1>;
+				#reset-cells = <1>;
+
+				domains {
+					vpu_domain: vpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000008>;
+						marvell,pmu_iso_mask = <0x00000001>;
+						resets = <&pmu 16>;
+					};
+
+					gpu_domain: gpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000004>;
+						marvell,pmu_iso_mask = <0x00000002>;
+						resets = <&pmu 18>;
+					};
+				};
+
+				thermal: thermal-diode@1c {
+					compatible = "marvell,dove-thermal";
+					reg = <0x001c 0x0c>, <0x005c 0x08>;
+				};
+
+				gate_clk: clock-gating-ctrl@38 {
+					compatible = "marvell,dove-gating-clock";
+					reg = <0x0038 0x4>;
+					clocks = <&core_clk 0>;
+					#clock-cells = <1>;
+				};
+
+				divider_clk: core-clock@64 {
+					compatible = "marvell,dove-divider-clock";
+					reg = <0x0064 0x8>;
+					#clock-cells = <1>;
+				};
+
+				pinctrl: pin-ctrl@200 {
+					compatible = "marvell,dove-pinctrl";
+					reg = <0x0200 0x14>,
+					      <0x0440 0x04>;
+					clocks = <&gate_clk 22>;
+
+					pmx_gpio_0: pmx-gpio-0 {
+						marvell,pins = "mpp0";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_1: pmx-gpio-1 {
+						marvell,pins = "mpp1";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_2: pmx-gpio-2 {
+						marvell,pins = "mpp2";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_3: pmx-gpio-3 {
+						marvell,pins = "mpp3";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_4: pmx-gpio-4 {
+						marvell,pins = "mpp4";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_5: pmx-gpio-5 {
+						marvell,pins = "mpp5";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_6: pmx-gpio-6 {
+						marvell,pins = "mpp6";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_7: pmx-gpio-7 {
+						marvell,pins = "mpp7";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_8: pmx-gpio-8 {
+						marvell,pins = "mpp8";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_9: pmx-gpio-9 {
+						marvell,pins = "mpp9";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+						marvell,pins = "mpp9";
+						marvell,function = "pex1";
+					};
+
+					pmx_gpio_10: pmx-gpio-10 {
+						marvell,pins = "mpp10";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_11: pmx-gpio-11 {
+						marvell,pins = "mpp11";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+						marvell,pins = "mpp11";
+						marvell,function = "pex0";
+					};
+
+					pmx_gpio_12: pmx-gpio-12 {
+						marvell,pins = "mpp12";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_13: pmx-gpio-13 {
+						marvell,pins = "mpp13";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_extclk: pmx-audio1-extclk {
+						marvell,pins = "mpp13";
+						marvell,function = "audio1";
+					};
+
+					pmx_gpio_14: pmx-gpio-14 {
+						marvell,pins = "mpp14";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_15: pmx-gpio-15 {
+						marvell,pins = "mpp15";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_16: pmx-gpio-16 {
+						marvell,pins = "mpp16";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_17: pmx-gpio-17 {
+						marvell,pins = "mpp17";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_18: pmx-gpio-18 {
+						marvell,pins = "mpp18";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_19: pmx-gpio-19 {
+						marvell,pins = "mpp19";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_20: pmx-gpio-20 {
+						marvell,pins = "mpp20";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_21: pmx-gpio-21 {
+						marvell,pins = "mpp21";
+						marvell,function = "gpio";
+					};
+
+					pmx_camera: pmx-camera {
+						marvell,pins = "mpp_camera";
+						marvell,function = "camera";
+					};
+
+					pmx_camera_gpio: pmx-camera-gpio {
+						marvell,pins = "mpp_camera";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio0: pmx-sdio0 {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "sdio0";
+					};
+
+					pmx_sdio0_gpio: pmx-sdio0-gpio {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio1: pmx-sdio1 {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "sdio1";
+					};
+
+					pmx_sdio1_gpio: pmx-sdio1-gpio {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_gpio: pmx-audio1-gpio {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "i2s1/spdifo";
+					};
+
+					pmx_spi0: pmx-spi0 {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "spi0";
+					};
+
+					pmx_spi0_gpio: pmx-spi0-gpio {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "gpio";
+					};
+
+					pmx_spi1_4_7: pmx-spi1-4-7 {
+						marvell,pins = "mpp4", "mpp5",
+							"mpp6", "mpp7";
+						marvell,function = "spi1";
+					};
+
+					pmx_spi1_20_23: pmx-spi1-20-23 {
+						marvell,pins = "mpp20", "mpp21",
+							"mpp22", "mpp23";
+						marvell,function = "spi1";
+					};
+
+					pmx_uart1: pmx-uart1 {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "uart1";
+					};
+
+					pmx_uart1_gpio: pmx-uart1-gpio {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "gpio";
+					};
+
+					pmx_nand: pmx-nand {
+						marvell,pins = "mpp_nand";
+						marvell,function = "nand";
+					};
+
+					pmx_nand_gpo: pmx-nand-gpo {
+						marvell,pins = "mpp_nand";
+						marvell,function = "gpo";
+					};
+
+					pmx_i2c1: pmx-i2c1 {
+						marvell,pins = "mpp17", "mpp19";
+						marvell,function = "twsi";
+					};
+
+					pmx_i2c2: pmx-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "twsi";
+					};
+
+					pmx_ssp_i2c2: pmx-ssp-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "ssp/twsi";
+					};
+
+					pmx_i2cmux_0: pmx-i2cmux-0 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt1";
+					};
+
+					pmx_i2cmux_1: pmx-i2cmux-1 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt2";
+					};
+
+					pmx_i2cmux_2: pmx-i2cmux-2 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt3";
+					};
+				};
+
+				core_clk: core-clocks@214 {
+					compatible = "marvell,dove-core-clock";
+					reg = <0x0214 0x4>;
+					#clock-cells = <1>;
+				};
+
+				gpio0: gpio-ctrl@400 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0400 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <12>, <13>, <14>, <60>;
+				};
+
+				gpio1: gpio-ctrl@420 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0420 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <61>;
+				};
+
+				rtc: real-time-clock@8500 {
+					compatible = "marvell,orion-rtc";
+					reg = <0x8500 0x20>;
+					interrupts = <5>;
+				};
+			};
+
+			gconf: global-config@e802c {
+				compatible = "marvell,dove-global-config",
+				             "syscon";
+				reg = <0xe802c 0x14>;
+			};
+
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
+
+			lcd1: lcd-controller@810000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x810000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			lcd0: lcd-controller@820000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x820000 0x1000>;
+				interrupts = <47>;
+				status = "disabled";
+			};
+
+			crypto_sram: sram@ffffe000 {
+				compatible = "mmio-sram";
+				reg = <0xffffe000 0x800>;
+				clocks = <&gate_clk 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			gpu: gpu@840000 {
+				clocks = <&divider_clk 1>;
+				clock-names = "core";
+				compatible = "vivante,gc";
+				interrupts = <48>;
+				power-domains = <&gpu_domain>;
+				reg = <0x840000 0x4000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
new file mode 100644
index 000000000..11d1241b0
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "dm814x-clocks.dtsi"
+
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+/*
+ * Compared to dm814x, dra62x has different shifts and more mux options.
+ * Please add the extra options for ysclk_14 and 16 if really needed.
+ */
+&timer1_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <4>;
+};
+
+&timer2_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <8>;
+};
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
new file mode 100644
index 000000000..c16e18382
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DRA62x J5 Eco EVM";
+	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "otg";
+};
+
+&usb1_phy {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
new file mode 100644
index 000000000..cc4878aaa
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -0,0 +1,23 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "dm814x.dtsi"
+
+/ {
+	compatible = "ti,dra62x";
+};
+
+/* Compared to dm814x, dra62x has different offsets for Ethernet */
+&mac {
+	reg = <0 0x800>,
+	      <0x1200 0x100>;
+};
+
+&davinci_mdio {
+	reg = <0x1000 0x100>;
+};
+
+#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 000000000..e75569383
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     3>;
+
+	trips {
+		dspeve_crit: dspeve_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
new file mode 100644
index 000000000..0f71a9f37
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+};
+
+&mcspi2 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	extcon = <&extcon_usb2>;
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+	status = "okay";
+};
+
+&mmc4 {
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
new file mode 100644
index 000000000..38530dbb8
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+
+/ {
+	model = "TI DRA742";
+	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
+	};
+
+	evm_12v0: fixedregulator-evm_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sw";
+		vin-supply = <&sysen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v6: fixedregulator-evm_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&evm_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&sysen2>;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				/* REGEN1 is unused */
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resources */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				/* REGEN3 is unused */
+
+				sysen1: sysen1 {
+					/* PMIC_REGEN_3V3 */
+					regulator-name = "sysen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sysen2: sysen2 {
+					/* PMIC_REGEN_DDR */
+					regulator-name = "sysen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pcf_lcd: gpio@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_hdmi: gpio@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&evm_3v3_sd>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+	pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+	pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&evm_1v8_sw>;
+	vqmmc-supply = <&evm_1v8_sw>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+	pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+	pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+	pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+};
+
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&evm_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25";
+	pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
+	pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+	pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+	pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+};
+
+&cpu0 {
+	vdd-supply = <&smps123_reg>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	* For the existing IOdelay configuration via U-Boot we don't
+	* support NAND on dra7-evm. Keep it disabled. Enabling it
+	* requires a different configuration by U-Boot.
+	*/
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&gpio7_target {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
new file mode 100644
index 000000000..a5bdc6431
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA7xx/AM57xx platforms
+ */
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		status = "okay";
+	};
+};
+
+&ipu2 {
+	mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer4>, <&timer9>;
+};
+
+&ipu1 {
+	mboxes = <&mailbox5 &mbox_ipu1_ipc3x>;
+	ti,timers = <&timer11>;
+	ti,watchdog-timers = <&timer7>, <&timer8>;
+};
+
+&dsp1 {
+	mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer10>;
+};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
new file mode 100644
index 000000000..a70773216
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     4>;
+
+	trips {
+		iva_crit: iva_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
new file mode 100644
index 000000000..f8c0eee7a
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -0,0 +1,4569 @@
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,dra7-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x002000>,	/* ap 3 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 4 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 5 */
+			 <0x00006000 0x00006000 0x001000>,	/* ap 6 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 7 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 8 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 9 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 10 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 11 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 12 */
+			 <0x00080000 0x00080000 0x008000>,	/* ap 13 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 14 */
+			 <0x000a0000 0x000a0000 0x008000>,	/* ap 15 */
+			 <0x000a8000 0x000a8000 0x001000>,	/* ap 16 */
+			 <0x000d9000 0x000d9000 0x001000>,	/* ap 17 */
+			 <0x000da000 0x000da000 0x001000>,	/* ap 18 */
+			 <0x000dd000 0x000dd000 0x001000>,	/* ap 19 */
+			 <0x000de000 0x000de000 0x001000>,	/* ap 20 */
+			 <0x000e0000 0x000e0000 0x001000>,	/* ap 21 */
+			 <0x000e1000 0x000e1000 0x001000>,	/* ap 22 */
+			 <0x000f4000 0x000f4000 0x001000>,	/* ap 23 */
+			 <0x000f5000 0x000f5000 0x001000>,	/* ap 24 */
+			 <0x000f6000 0x000f6000 0x001000>,	/* ap 25 */
+			 <0x000f7000 0x000f7000 0x001000>,	/* ap 26 */
+			 <0x00090000 0x00090000 0x008000>,	/* ap 59 */
+			 <0x00098000 0x00098000 0x001000>;	/* ap 60 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x2000>;
+
+			scm: scm@0 {
+				compatible = "ti,dra7-scm-core", "simple-bus";
+				reg = <0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x1400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x0 0x1400>;
+
+					pbias_regulator: pbias_regulator@e00 {
+						compatible = "ti,pbias-dra7", "ti,pbias-omap";
+						reg = <0xe00 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap5 {
+							regulator-name = "pbias_mmc_omap5";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+						};
+					};
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dra7xx-phy-gmii-sel";
+						reg = <0x554 0x4>;
+						#phy-cells = <1>;
+					};
+
+					scm_conf_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				dra7_pmx_core: pinmux@1400 {
+					compatible = "ti,dra7-padconf",
+						     "pinctrl-single";
+					reg = <0x1400 0x0468>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x3fffffff>;
+				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+					#syscon-cells = <2>;
+				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
+			};
+		};
+
+		target-module@5000 {			/* 0x4a005000, ap 5 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+
+			cm_core_aon: cm_core_aon@0 {
+				compatible = "ti,dra7-cm-core-aon",
+					      "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x2000>;
+				ranges = <0 0 0x2000>;
+
+				cm_core_aon_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_aon_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 7 0e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm_core: cm_core@0 {
+				compatible = "ti,dra7-cm-core", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x3000>;
+				ranges = <0 0 0x3000>;
+
+				cm_core_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): core_pwrdm, dma_clkdm */
+			clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 11 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x8000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+				reg = <0x0 0x20>;
+
+				usb2_phy1: phy@4000 {
+					compatible = "ti,dra7x-usb2", "ti,omap-usb2";
+					reg = <0x4000 0x400>;
+					syscon-phy-power = <&scm_conf 0x300>;
+					clocks = <&usb_phy1_always_on_clk32k>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+
+				usb2_phy2: phy@5000 {
+					compatible = "ti,dra7x-usb2-phy2",
+						     "ti,omap-usb2";
+					reg = <0x5000 0x400>;
+					syscon-phy-power = <&scm_conf 0xe74>;
+					clocks = <&usb_phy2_always_on_clk32k>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+
+				usb3_phy1: phy@4400 {
+					compatible = "ti,omap-usb3";
+					reg = <0x4400 0x80>,
+					      <0x4800 0x64>,
+					      <0x4c00 0x40>;
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x370>;
+					clocks = <&usb_phy3_always_on_clk32k>,
+						 <&sys_clkin1>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"sysclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x90000 0x4>,
+			      <0x90010 0x4>,
+			      <0x90014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x8000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+				reg = <0x0 0x20>;
+
+				pcie1_phy: pciephy@4000 {
+					compatible = "ti,phy-pipe3-pcie";
+					reg = <0x4000 0x80>, /* phy_rx */
+					      <0x4400 0x64>; /* phy_tx */
+					reg-names = "phy_rx", "phy_tx";
+					syscon-phy-power = <&scm_conf_pcie 0x1c>;
+					syscon-pcs = <&scm_conf_pcie 0x10>;
+					clocks = <&dpll_pcie_ref_ck>,
+						 <&dpll_pcie_ref_m2ldo_ck>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
+						 <&optfclk_pciephy_div>,
+						 <&sys_clkin1>;
+					clock-names = "dpll_ref", "dpll_ref_m2",
+						      "wkupclk", "refclk",
+						      "div-clk", "phy-div", "sysclk";
+					#phy-cells = <0>;
+				};
+
+				pcie2_phy: pciephy@5000 {
+					compatible = "ti,phy-pipe3-pcie";
+					reg = <0x5000 0x80>, /* phy_rx */
+					      <0x5400 0x64>; /* phy_tx */
+					reg-names = "phy_rx", "phy_tx";
+					syscon-phy-power = <&scm_conf_pcie 0x20>;
+					syscon-pcs = <&scm_conf_pcie 0x10>;
+					clocks = <&dpll_pcie_ref_ck>,
+						 <&dpll_pcie_ref_m2ldo_ck>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
+						 <&optfclk_pciephy_div>,
+						 <&sys_clkin1>;
+					clock-names = "dpll_ref", "dpll_ref_m2",
+						      "wkupclk", "refclk",
+						      "div-clk", "phy-div", "sysclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+
+				sata_phy: phy@6000 {
+					compatible = "ti,phy-pipe3-sata";
+					reg = <0x6000 0x80>, /* phy_rx */
+					      <0x6400 0x64>, /* phy_tx */
+					      <0x6800 0x40>; /* pll_ctrl */
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x374>;
+					clocks = <&sys_clkin1>,
+						 <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+					clock-names = "sysclk", "refclk";
+					syscon-pllreset = <&scm_conf 0x3fc>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		target-module@a0000 {			/* 0x4a0a0000, ap 15 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x8000>;
+		};
+
+		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0xd9038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd9000 0x1000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
+		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0xdd038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xdd000 0x1000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
+		target-module@e0000 {			/* 0x4a0e0000, ap 21 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0000 0x1000>;
+		};
+
+		target-module@f4000 {			/* 0x4a0f4000, ap 23 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf4000 0x4>,
+			      <0xf4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf4000 0x1000>;
+
+			mailbox1: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				status = "disabled";
+			};
+		};
+
+		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xf6000 0x4>,
+			      <0xf6010 0x4>,
+			      <0xf6014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf6000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 27 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 28 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 29 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 30 */
+			 <0x00040000 0x00140000 0x010000>,	/* ap 31 */
+			 <0x00050000 0x00150000 0x001000>,	/* ap 32 */
+			 <0x00051000 0x00151000 0x001000>,	/* ap 33 */
+			 <0x00052000 0x00152000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00153000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00154000 0x001000>,	/* ap 36 */
+			 <0x00055000 0x00155000 0x001000>,	/* ap 37 */
+			 <0x00056000 0x00156000 0x001000>,	/* ap 38 */
+			 <0x00057000 0x00157000 0x001000>,	/* ap 39 */
+			 <0x00058000 0x00158000 0x001000>,	/* ap 40 */
+			 <0x0005b000 0x0015b000 0x001000>,	/* ap 41 */
+			 <0x0005c000 0x0015c000 0x001000>,	/* ap 42 */
+			 <0x0005d000 0x0015d000 0x001000>,	/* ap 45 */
+			 <0x0005e000 0x0015e000 0x001000>,	/* ap 46 */
+			 <0x0005f000 0x0015f000 0x001000>,	/* ap 47 */
+			 <0x00060000 0x00160000 0x001000>,	/* ap 48 */
+			 <0x00061000 0x00161000 0x001000>,	/* ap 49 */
+			 <0x00062000 0x00162000 0x001000>,	/* ap 50 */
+			 <0x00063000 0x00163000 0x001000>,	/* ap 51 */
+			 <0x00064000 0x00164000 0x001000>,	/* ap 52 */
+			 <0x00065000 0x00165000 0x001000>,	/* ap 53 */
+			 <0x00066000 0x00166000 0x001000>,	/* ap 54 */
+			 <0x00067000 0x00167000 0x001000>,	/* ap 55 */
+			 <0x00068000 0x00168000 0x001000>,	/* ap 56 */
+			 <0x0006d000 0x0016d000 0x001000>,	/* ap 57 */
+			 <0x0006e000 0x0016e000 0x001000>,	/* ap 58 */
+			 <0x00071000 0x00171000 0x001000>,	/* ap 61 */
+			 <0x00072000 0x00172000 0x001000>,	/* ap 62 */
+			 <0x00073000 0x00173000 0x001000>,	/* ap 63 */
+			 <0x00074000 0x00174000 0x001000>,	/* ap 64 */
+			 <0x00075000 0x00175000 0x001000>,	/* ap 65 */
+			 <0x00076000 0x00176000 0x001000>,	/* ap 66 */
+			 <0x00077000 0x00177000 0x001000>,	/* ap 67 */
+			 <0x00078000 0x00178000 0x001000>,	/* ap 68 */
+			 <0x00081000 0x00181000 0x001000>,	/* ap 69 */
+			 <0x00082000 0x00182000 0x001000>,	/* ap 70 */
+			 <0x00083000 0x00183000 0x001000>,	/* ap 71 */
+			 <0x00084000 0x00184000 0x001000>,	/* ap 72 */
+			 <0x00085000 0x00185000 0x001000>,	/* ap 73 */
+			 <0x00086000 0x00186000 0x001000>,	/* ap 74 */
+			 <0x00087000 0x00187000 0x001000>,	/* ap 75 */
+			 <0x00088000 0x00188000 0x001000>,	/* ap 76 */
+			 <0x00069000 0x00169000 0x001000>,	/* ap 103 */
+			 <0x0006a000 0x0016a000 0x001000>,	/* ap 104 */
+			 <0x00079000 0x00179000 0x001000>,	/* ap 105 */
+			 <0x0007a000 0x0017a000 0x001000>,	/* ap 106 */
+			 <0x0006b000 0x0016b000 0x001000>,	/* ap 107 */
+			 <0x0006c000 0x0016c000 0x001000>,	/* ap 108 */
+			 <0x0007b000 0x0017b000 0x001000>,	/* ap 121 */
+			 <0x0007c000 0x0017c000 0x001000>,	/* ap 122 */
+			 <0x0007d000 0x0017d000 0x001000>,	/* ap 123 */
+			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
+			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
+			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+
+		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 29 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+
+		target-module@51000 {			/* 0x4a151000, ap 33 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+		};
+
+		target-module@53000 {			/* 0x4a153000, ap 35 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+		};
+
+		target-module@55000 {			/* 0x4a155000, ap 37 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+		};
+
+		target-module@57000 {			/* 0x4a157000, ap 39 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a159000, ap 125 6a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+		};
+
+		target-module@5b000 {			/* 0x4a15b000, ap 41 60.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4a15d000, ap 45 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@5f000 {			/* 0x4a15f000, ap 47 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5f000 0x1000>;
+		};
+
+		target-module@61000 {			/* 0x4a161000, ap 49 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x61000 0x1000>;
+		};
+
+		target-module@63000 {			/* 0x4a163000, ap 51 5c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x63000 0x1000>;
+		};
+
+		target-module@65000 {			/* 0x4a165000, ap 53 4e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x65000 0x1000>;
+		};
+
+		target-module@67000 {			/* 0x4a167000, ap 55 5e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x67000 0x1000>;
+		};
+
+		target-module@69000 {			/* 0x4a169000, ap 103 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x69000 0x1000>;
+		};
+
+		target-module@6b000 {			/* 0x4a16b000, ap 107 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6b000 0x1000>;
+		};
+
+		target-module@6d000 {			/* 0x4a16d000, ap 57 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6d000 0x1000>;
+		};
+
+		target-module@71000 {			/* 0x4a171000, ap 61 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x71000 0x1000>;
+		};
+
+		target-module@73000 {			/* 0x4a173000, ap 63 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x73000 0x1000>;
+		};
+
+		target-module@75000 {			/* 0x4a175000, ap 65 64.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x75000 0x1000>;
+		};
+
+		target-module@77000 {			/* 0x4a177000, ap 67 66.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x77000 0x1000>;
+		};
+
+		target-module@79000 {			/* 0x4a179000, ap 105 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x79000 0x1000>;
+		};
+
+		target-module@7b000 {			/* 0x4a17b000, ap 121 7c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7b000 0x1000>;
+		};
+
+		target-module@7d000 {			/* 0x4a17d000, ap 123 7e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7d000 0x1000>;
+		};
+
+		target-module@81000 {			/* 0x4a181000, ap 69 26.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x81000 0x1000>;
+		};
+
+		target-module@83000 {			/* 0x4a183000, ap 71 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x83000 0x1000>;
+		};
+
+		target-module@85000 {			/* 0x4a185000, ap 73 36.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x85000 0x1000>;
+		};
+
+		target-module@87000 {			/* 0x4a187000, ap 75 74.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x87000 0x1000>;
+		};
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00018000 0x00218000 0x001000>,	/* ap 43 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 44 */
+			 <0x00000000 0x00200000 0x001000>,	/* ap 77 */
+			 <0x00001000 0x00201000 0x001000>,	/* ap 78 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 79 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 80 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 81 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 82 */
+			 <0x0000e000 0x0020e000 0x001000>,	/* ap 83 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 84 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 85 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 86 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 87 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 88 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 89 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 90 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 91 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 92 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 93 */
+			 <0x0001d000 0x0021d000 0x001000>,	/* ap 94 */
+			 <0x0001e000 0x0021e000 0x001000>,	/* ap 95 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 96 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 97 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 98 */
+			 <0x00024000 0x00224000 0x001000>,	/* ap 99 */
+			 <0x00025000 0x00225000 0x001000>,	/* ap 100 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 101 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 102 */
+			 <0x0002c000 0x0022c000 0x001000>,	/* ap 109 */
+			 <0x0002d000 0x0022d000 0x001000>,	/* ap 110 */
+			 <0x0002e000 0x0022e000 0x001000>,	/* ap 111 */
+			 <0x0002f000 0x0022f000 0x001000>,	/* ap 112 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 113 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 114 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 115 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 116 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 117 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 118 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 119 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 120 */
+			 <0x0001a000 0x0021a000 0x001000>,	/* ap 127 */
+			 <0x0001b000 0x0021b000 0x001000>;	/* ap 128 */
+
+		target-module@0 {			/* 0x4a200000, ap 77 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 79 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 81 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@e000 {			/* 0x4a20e000, ap 83 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 85 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 87 16.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 89 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 43 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x4a21a000, ap 127 7a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 93 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 95 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 97 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x4a224000, ap 99 44.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 101 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 91 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+
+		target-module@2c000 {			/* 0x4a22c000, ap 109 6c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4a22e000, ap 111 6e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x4a230000, ap 113 70.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+		};
+
+		target-module@32000 {			/* 0x4a232000, ap 115 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+		};
+
+		target-module@34000 {			/* 0x4a234000, ap 117 76.1 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x4a236000, ap 119 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+	};
+};
+
+&l4_per1 {						/* 0x48000000 */
+	compatible = "ti,dra7-l4-per1", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
+			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
+			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
+			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
+			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
+			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
+			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x51000 0x4>,
+			      <0x51010 0x4>,
+			      <0x51114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+
+			gpio7: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53000 0x4>,
+			      <0x53010 0x4>,
+			      <0x53114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+
+			gpio8: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 23 32.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@66000 {			/* 0x48066000, ap 63 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66050 0x4>,
+			      <0x66054 0x4>,
+			      <0x66058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@68000 {			/* 0x48068000, ap 53 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x68050 0x4>,
+			      <0x68054 0x4>,
+			      <0x68058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x1000>;
+
+			uart6: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 24 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 26 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 28 0c.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			                        status = "disabled";
+				dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 30 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 32 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78010 0x4>,
+			      <0x78014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0xfc0>;      /* device IO registers */
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@7a000 {			/* 0x4807a000, ap 81 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7a000 0x8>,
+			      <0x7a010 0x8>,
+			      <0x7a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7a000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@7c000 {			/* 0x4807c000, ap 83 4a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7c000 0x8>,
+			      <0x7c010 0x8>,
+			      <0x7c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x1000>;
+
+			i2c5: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@90000 {			/* 0x48090000, ap 55 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma_xbar 35>,
+				       <&sdma_xbar 36>,
+				       <&sdma_xbar 37>,
+				       <&sdma_xbar 38>,
+				       <&sdma_xbar 39>,
+				       <&sdma_xbar 40>,
+				       <&sdma_xbar 41>,
+				       <&sdma_xbar 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+				status = "disabled";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma_xbar 43>,
+				       <&sdma_xbar 44>,
+				       <&sdma_xbar 45>,
+				       <&sdma_xbar 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 51 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				pbias-supply = <&pbias_mmc_reg>;
+				max-frequency = <192000000>;
+				mmc-ddr-1_8v;
+				mmc-ddr-3_3v;
+			};
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 57 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+				max-frequency = <64000000>;
+				/* SDMA is not supported */
+				sdhci-caps-mask = <0x0 0x400000>;
+			};
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 37 52.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb2000 0x4>,
+			      <0xb2014 0x4>,
+			      <0xb2018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			ti,no-reset-on-init;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+
+			hdqw1w: 1w@0 {
+				compatible = "ti,omap3-1w";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 65 40.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				max-frequency = <192000000>;
+				/* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
+				sdhci-caps-mask = <0x7 0x0>;
+				mmc-hs200-1_8v;
+				mmc-ddr-1_8v;
+				mmc-ddr-3_3v;
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 67 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
+				dma-names = "tx0", "rx0";
+				status = "disabled";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
+				dma-names = "tx0", "rx0";
+				status = "disabled";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				max-frequency = <192000000>;
+				/* SDMA is not supported */
+				sdhci-caps-mask = <0x0 0x400000>;
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_per2 {						/* 0x48400000 */
+	compatible = "ti,dra7-l4-per2", "simple-bus";
+	reg = <0x48400000 0x800>,
+	      <0x48400800 0x800>,
+	      <0x48401000 0x400>,
+	      <0x48401400 0x400>,
+	      <0x48401800 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48400000 0x400000>,	/* segment 0 */
+		 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
+		 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
+		 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
+		 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
+		 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
+		 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
+		 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
+		 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
+
+	segment@0 {					/* 0x48400000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00084000 0x00084000 0x004000>,	/* ap 3 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 4 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 5 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 6 */
+			 <0x0002c000 0x0002c000 0x001000>,	/* ap 7 */
+			 <0x0002d000 0x0002d000 0x001000>,	/* ap 8 */
+			 <0x00060000 0x00060000 0x002000>,	/* ap 9 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 10 */
+			 <0x00064000 0x00064000 0x002000>,	/* ap 11 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 12 */
+			 <0x00068000 0x00068000 0x002000>,	/* ap 13 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 14 */
+			 <0x0006c000 0x0006c000 0x002000>,	/* ap 15 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 16 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 17 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 18 */
+			 <0x00070000 0x00070000 0x002000>,	/* ap 19 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 20 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 21 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 22 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 24 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 25 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 26 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 27 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 28 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 29 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 30 */
+			 <0x00080000 0x00080000 0x002000>,	/* ap 31 */
+			 <0x00082000 0x00082000 0x001000>,	/* ap 32 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 33 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 34 */
+			 <0x00074000 0x00074000 0x002000>,	/* ap 35 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 36 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 37 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x002000>,	/* ap 39 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 40 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 41 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 42 */
+			 <0x0007c000 0x0007c000 0x002000>,	/* ap 43 */
+			 <0x0007e000 0x0007e000 0x001000>,	/* ap 44 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 45 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 46 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 47 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 48 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 49 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 50 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 51 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 52 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 53 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 54 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 55 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 56 */
+			 <0x00058000 0x00058000 0x002000>,	/* ap 57 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 58 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 59 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 60 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 61 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 62 */
+			 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
+			 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
+			 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
+			 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
+			 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
+			 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
+			 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
+			 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
+
+		target-module@20000 {			/* 0x48420000, ap 47 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart7: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@22000 {			/* 0x48422000, ap 49 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart8: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x48424000, ap 51 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart9: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2c000 {			/* 0x4842c000, ap 7 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x48436000, ap 17 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@3a000 {			/* 0x4843a000, ap 21 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+		};
+
+		atl_tm: target-module@3c000 {		/* 0x4843c000, ap 23 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3c000 0x4>;
+			reg-names = "rev";
+			clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+
+			atl: atl@0 {
+				compatible = "ti,dra7-atl";
+				reg = <0x0 0x3ff>;
+				ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+						     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+				clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap0: ecap@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap1: ecap@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap2: ecap@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@46000 {			/* 0x48446000, ap 53 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+		};
+
+		target-module@48000 {			/* 0x48448000, ap 55 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+		};
+
+		target-module@4a000 {			/* 0x4844a000, ap 33 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+		};
+
+		target-module@4c000 {			/* 0x4844c000, ap 45 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+		};
+
+		target-module@50000 {			/* 0x48450000, ap 37 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x1000>;
+		};
+
+		target-module@54000 {			/* 0x48454000, ap 41 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000 0x1000>;
+		};
+
+		target-module@58000 {			/* 0x48458000, ap 57 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x2000>;
+		};
+
+		target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4845d000, ap 61 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@60000 {			/* 0x48460000, ap 9 0e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x60000 0x4>,
+			      <0x60004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x2000>,
+				 <0x45800000 0x45800000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x45800000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+				dma-names = "tx", "rx";
+				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+				clock-names = "fck", "ahclkx", "ahclkr";
+				status = "disabled";
+			};
+		};
+
+		target-module@64000 {			/* 0x48464000, ap 11 1e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x2000>,
+				 <0x45c00000 0x45c00000 0x400000>;
+
+			mcasp2: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x45c00000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+				clock-names = "fck", "ahclkx", "ahclkr";
+				status = "disabled";
+			};
+		};
+
+		target-module@68000 {			/* 0x48468000, ap 13 26.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x68000 0x4>,
+			      <0x68004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp3: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@6c000 {			/* 0x4846c000, ap 15 2e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x6c000 0x4>,
+			      <0x6c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x2000>,
+				 <0x48436000 0x48436000 0x400000>;
+
+			mcasp4: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48436000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@70000 {			/* 0x48470000, ap 19 36.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x70000 0x4>,
+			      <0x70004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x2000>,
+				 <0x4843a000 0x4843a000 0x400000>;
+
+			mcasp5: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4843a000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@74000 {			/* 0x48474000, ap 35 14.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x2000>,
+				 <0x4844c000 0x4844c000 0x400000>;
+
+			mcasp6: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4844c000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@78000 {			/* 0x48478000, ap 39 0c.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x2000>,
+				 <0x48450000 0x48450000 0x400000>;
+
+			mcasp7: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48450000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@7c000 {			/* 0x4847c000, ap 43 04.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x7c000 0x4>,
+			      <0x7c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x2000>,
+				 <0x48454000 0x48454000 0x400000>;
+
+			mcasp8: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48454000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48480000, ap 31 16.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80020 0x4>;
+			reg-names = "rev";
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x2000>;
+
+			dcan2: can@0 {
+				compatible = "ti,dra7-d_can";
+				reg = <0x0 0x2000>;
+				syscon-raminit = <&scm_conf 0x558 1>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sys_clkin1>;
+				status = "disabled";
+			};
+		};
+
+		target-module@84000 {			/* 0x48484000, ap 3 10.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x85200 0x4>,
+			      <0x85208 0x4>,
+			      <0x85204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x84000 0x4000>;
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
+			mac_sw: switch@0 {
+				compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&gmac_main_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&gmac_main_clk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+					clock-names = "cpts";
+				};
+			};
+		};
+	};
+};
+
+&l4_per3 {						/* 0x48800000 */
+	compatible = "ti,dra7-l4-per3", "simple-bus";
+	reg = <0x48800000 0x800>,
+	      <0x48800800 0x800>,
+	      <0x48801000 0x400>,
+	      <0x48801400 0x400>,
+	      <0x48801800 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48800000 0x200000>;	/* segment 0 */
+
+	segment@0 {					/* 0x48800000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 5 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 6 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 7 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 8 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 9 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 10 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 11 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 12 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 13 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 14 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 15 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 16 */
+			 <0x0002c000 0x0002c000 0x001000>,	/* ap 17 */
+			 <0x0002d000 0x0002d000 0x001000>,	/* ap 18 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 19 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 20 */
+			 <0x00170000 0x00170000 0x010000>,	/* ap 21 */
+			 <0x00180000 0x00180000 0x001000>,	/* ap 22 */
+			 <0x00190000 0x00190000 0x010000>,	/* ap 23 */
+			 <0x001a0000 0x001a0000 0x001000>,	/* ap 24 */
+			 <0x001b0000 0x001b0000 0x010000>,	/* ap 25 */
+			 <0x001c0000 0x001c0000 0x001000>,	/* ap 26 */
+			 <0x001d0000 0x001d0000 0x010000>,	/* ap 27 */
+			 <0x001e0000 0x001e0000 0x001000>,	/* ap 28 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 29 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 30 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 31 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 32 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 33 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 34 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 35 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 36 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 37 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 38 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 39 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 40 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 41 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 42 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 43 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 44 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 45 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 46 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 47 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 48 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 49 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 50 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 51 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 52 */
+			 <0x0004e000 0x0004e000 0x001000>,	/* ap 53 */
+			 <0x0004f000 0x0004f000 0x001000>,	/* ap 54 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 55 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 56 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 57 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 58 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 59 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 60 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 61 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 62 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 63 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 64 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 65 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 66 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 67 */
+			 <0x00065000 0x00065000 0x001000>,	/* ap 68 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 69 */
+			 <0x0005f000 0x0005f000 0x001000>,	/* ap 70 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 71 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 72 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 73 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 74 */
+			 <0x00140000 0x00140000 0x020000>,	/* ap 75 */
+			 <0x00160000 0x00160000 0x001000>,	/* ap 76 */
+			 <0x00016000 0x00016000 0x001000>,	/* ap 77 */
+			 <0x00017000 0x00017000 0x001000>,	/* ap 78 */
+			 <0x000c0000 0x000c0000 0x020000>,	/* ap 79 */
+			 <0x000e0000 0x000e0000 0x001000>,	/* ap 80 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 81 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 82 */
+			 <0x00080000 0x00080000 0x020000>,	/* ap 83 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 84 */
+			 <0x00100000 0x00100000 0x020000>,	/* ap 85 */
+			 <0x00120000 0x00120000 0x001000>,	/* ap 86 */
+			 <0x00010000 0x00010000 0x001000>,	/* ap 87 */
+			 <0x00011000 0x00011000 0x001000>,	/* ap 88 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 89 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 90 */
+			 <0x0001c000 0x0001c000 0x001000>,	/* ap 91 */
+			 <0x0001d000 0x0001d000 0x001000>,	/* ap 92 */
+			 <0x0001e000 0x0001e000 0x001000>,	/* ap 93 */
+			 <0x0001f000 0x0001f000 0x001000>,	/* ap 94 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 95 */
+			 <0x00003000 0x00003000 0x001000>;	/* ap 96 */
+
+		target-module@2000 {			/* 0x48802000, ap 95 7c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			mailbox13: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@4000 {			/* 0x48804000, ap 81 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4880a000, ap 89 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x48810000, ap 87 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x48816000, ap 77 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4881c000, ap 91 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4881e000, ap 93 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x22000 0x4>,
+			      <0x22010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x24000 0x4>,
+			      <0x24010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x26000 0x4>,
+			      <0x26010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+
+			timer13: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2a000 0x4>,
+			      <0x2a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			timer14: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2c000 0x4>,
+			      <0x2c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+
+			timer15: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>;
+
+			timer16: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rtctarget: target-module@38000 {			/* 0x48838000, ap 29 12.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38074 0x4>,
+			      <0x38078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, rtc_clkdm */
+			clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am3352-rtc";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sys_32k_ck>;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4883a000, ap 33 3e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+
+			mailbox2: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4883c000, ap 35 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+
+			mailbox3: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3e000 {			/* 0x4883e000, ap 37 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			mailbox4: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@40000 {			/* 0x48840000, ap 39 64.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			mailbox5: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@42000 {			/* 0x48842000, ap 41 4e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			mailbox6: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@44000 {			/* 0x48844000, ap 43 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			mailbox7: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@46000 {			/* 0x48846000, ap 45 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			mailbox8: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@48000 {			/* 0x48848000, ap 47 36.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+		};
+
+		target-module@4a000 {			/* 0x4884a000, ap 49 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+		};
+
+		target-module@4c000 {			/* 0x4884c000, ap 51 44.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+		};
+
+		target-module@4e000 {			/* 0x4884e000, ap 53 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4e000 0x1000>;
+		};
+
+		target-module@50000 {			/* 0x48850000, ap 55 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x1000>;
+		};
+
+		target-module@52000 {			/* 0x48852000, ap 57 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x52000 0x1000>;
+		};
+
+		target-module@54000 {			/* 0x48854000, ap 59 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000 0x1000>;
+		};
+
+		target-module@56000 {			/* 0x48856000, ap 61 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+		};
+
+		target-module@58000 {			/* 0x48858000, ap 63 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x1000>;
+		};
+
+		target-module@5a000 {			/* 0x4885a000, ap 65 5c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5a000 0x1000>;
+		};
+
+		target-module@5c000 {			/* 0x4885c000, ap 31 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c000 0x1000>;
+		};
+
+		target-module@5e000 {			/* 0x4885e000, ap 69 6c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5e000 0x4>,
+			      <0x5e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x1000>;
+
+			mailbox9: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@60000 {			/* 0x48860000, ap 71 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x60000 0x4>,
+			      <0x60010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mailbox10: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@62000 {			/* 0x48862000, ap 73 74.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			mailbox11: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@64000 {			/* 0x48864000, ap 67 52.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			mailbox12: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48880000, ap 83 0e.1 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x20000>;
+
+			omap_dwc3_1: omap_dwc3_1@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+
+				usb1: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy1>, <&usb3_phy1>;
+					phy-names = "usb2-phy", "usb3-phy";
+					maximum-speed = "super-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@c0000 {			/* 0x488c0000, ap 79 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc0000 0x4>,
+			      <0xc0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x20000>;
+
+			omap_dwc3_2: omap_dwc3_2@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+
+				usb2: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy2>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+					snps,dis_metastability_quirk;
+				};
+			};
+		};
+
+		usb3_tm: target-module@100000 {		/* 0x48900000, ap 85 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x100000 0x4>,
+			      <0x100010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x20000>;
+
+			omap_dwc3_3: omap_dwc3_3@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+				status = "disabled";
+
+				usb3: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x170010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x170000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x190010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x190000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1b0000 0x4>,
+			      <0x1b0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1b0000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1d0010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1d0000 0x10000>;
+
+			vpe: vpe@0 {
+				compatible = "ti,dra7-vpe";
+				reg = <0x0000 0x120>,
+				      <0x0700 0x80>,
+				      <0x5700 0x18>,
+				      <0xd000 0x400>;
+				reg-names = "vpe_top",
+					    "sc",
+					    "csc",
+					    "vpdma";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+&l4_wkup {						/* 0x4ae00000 */
+	compatible = "ti,dra7-l4-wkup", "simple-bus";
+	reg = <0x4ae00000 0x800>,
+	      <0x4ae00800 0x800>,
+	      <0x4ae01000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4ae20000 0x010000>,	/* segment 2 */
+		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
+
+	segment@0 {					/* 0x4ae00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 15 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 16 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 17 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 18 */
+
+		target-module@4000 {			/* 0x4ae04000, ap 15 40.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4ae06000, ap 3 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,dra7-prm", "simple-bus";
+				reg = <0 0x3000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x3000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae0c000, ap 17 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			scm_wkup: scm_conf@0 {
+				compatible = "syscon";
+				reg = <0 0x1000>;
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4ae10000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
+
+		target-module@0 {			/* 0x4ae10000, ap 5 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>,
+				 <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4ae14000, ap 7 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer1_target: target-module@8000 {	/* 0x4ae18000, ap 9 30.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae1c000, ap 11 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+	};
+
+	segment@20000 {					/* 0x4ae20000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 19 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 20 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 21 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 22 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 23 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 24 */
+			 <0x00009000 0x00029000 0x000100>,	/* ap 25 */
+			 <0x00008800 0x00028800 0x000200>,	/* ap 26 */
+			 <0x00008a00 0x00028a00 0x000100>,	/* ap 27 */
+			 <0x0000b000 0x0002b000 0x001000>,	/* ap 28 */
+			 <0x0000c000 0x0002c000 0x001000>,	/* ap 29 */
+			 <0x0000f000 0x0002f000 0x001000>;	/* ap 32 */
+
+		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			timer12: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+				ti,timer-secure;
+			};
+		};
+
+		target-module@2000 {			/* 0x4ae22000, ap 21 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4ae26000, ap 13 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00002800 0x00008800 0x00000200>,
+				 <0x00002a00 0x00008a00 0x00000100>,
+				 <0x00003000 0x00009000 0x00000100>;
+		};
+
+		target-module@b000 {			/* 0x4ae2b000, ap 28 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb050 0x4>,
+			      <0xb054 0x4>,
+			      <0xb058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			uart10: serial@0 {
+				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@f000 {			/* 0x4ae2f000, ap 32 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf000 0x1000>;
+		};
+	};
+
+	segment@30000 {					/* 0x4ae30000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */
+			 <0x0000e000 0x0003e000 0x001000>,	/* ap 31 */
+			 <0x00000000 0x00030000 0x001000>,	/* ap 33 */
+			 <0x00001000 0x00031000 0x001000>,	/* ap 34 */
+			 <0x00002000 0x00032000 0x001000>,	/* ap 35 */
+			 <0x00003000 0x00033000 0x001000>,	/* ap 36 */
+			 <0x00004000 0x00034000 0x001000>,	/* ap 37 */
+			 <0x00005000 0x00035000 0x001000>,	/* ap 38 */
+			 <0x00006000 0x00036000 0x001000>,	/* ap 39 */
+			 <0x00007000 0x00037000 0x001000>,	/* ap 40 */
+			 <0x00008000 0x00038000 0x001000>,	/* ap 41 */
+			 <0x00009000 0x00039000 0x001000>,	/* ap 42 */
+			 <0x0000a000 0x0003a000 0x001000>;	/* ap 43 */
+
+		target-module@1000 {			/* 0x4ae31000, ap 34 60.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1000 0x1000>;
+		};
+
+		target-module@3000 {			/* 0x4ae33000, ap 36 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x4ae35000, ap 38 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		target-module@7000 {			/* 0x4ae37000, ap 40 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+		};
+
+		target-module@9000 {			/* 0x4ae39000, ap 42 70.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4ae3c000, ap 30 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc020 0x4>;
+			reg-names = "rev";
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,dra7-d_can";
+				reg = <0x0 0x2000>;
+				syscon-raminit = <&scm_conf 0x558 0>;
+				interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
new file mode 100644
index 000000000..aa0947266
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMC IOdelay values for TI's DRA7xx SoCs.
+ * Copyright (C) 2018 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 000000000..998932136
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,1112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dra7.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+#include <dt-bindings/clock/dra7.h>
+
+#define MAX_SOURCES 400
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+		serial9 = &uart10;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		d_can0 = &dcan1;
+		d_can1 = &dcan2;
+		spi0 = &qspi;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x2000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+
+			vbb-supply = <&abb_mpu>;
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_wkup>;
+
+		opp_nom-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1060000 850000 1150000>,
+					<1060000 850000 1150000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp_od-1176000000 {
+			opp-hz = /bits/ 64 <1176000000>;
+			opp-microvolt = <1160000 885000 1160000>,
+					<1160000 885000 1160000>;
+
+			opp-supported-hw = <0xFF 0x02>;
+		};
+
+		opp_high@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1210000 950000 1250000>,
+					<1210000 950000 1250000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp: ocp {
+		compatible = "ti,dra7-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x0 0x44000000 0x0 0x1000000>,
+		      <0x0 0x45000000 0x0 0x1000>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_cfg: interconnect@4a000000 {
+		};
+		l4_wkup: interconnect@4ae00000 {
+		};
+		l4_per1: interconnect@48000000 {
+		};
+		l4_per2: interconnect@48400000 {
+		};
+		l4_per3: interconnect@48800000 {
+		};
+
+		axi@0 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
+			dma-ranges;
+			/**
+			 * To enable PCI endpoint mode, disable the pcie1_rc
+			 * node and enable pcie1_ep mode.
+			 */
+			pcie1_rc: pcie@51000000 {
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 232 0x4>, <0 233 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				linux,pci-domain = <0>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+						<0 0 0 2 &pcie1_intc 2>,
+						<0 0 0 3 &pcie1_intc 3>,
+						<0 0 0 4 &pcie1_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie1_ep: pcie_ep@51000000 {
+				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+				interrupts = <0 232 0x4>;
+				num-lanes = <1>;
+				num-ib-windows = <4>;
+				num-ob-windows = <16>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+				status = "disabled";
+			};
+		};
+
+		axi@1 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
+			dma-ranges;
+			status = "disabled";
+			pcie2_rc: pcie@51800000 {
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 355 0x4>, <0 356 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				linux,pci-domain = <1>;
+				ti,hwmods = "pcie2";
+				phys = <&pcie2_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+						<0 0 0 2 &pcie2_intc 2>,
+						<0 0 0 3 &pcie2_intc 3>,
+						<0 0 0 4 &pcie2_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+				0x4a00232c 0xc
+				0x4a002380 0x2c
+				0x4a0023C0 0x3c
+				0x4a002564 0x8
+				0x4a002574 0x50>;
+				compatible = "ti,dra752-bandgap";
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+		};
+
+		dsp1_system: dsp_system@40d00000 {
+			compatible = "syscon";
+			reg = <0x40d00000 0x100>;
+		};
+
+		dra7_iodelay_core: padconf@4844a000 {
+			compatible = "ti,dra7-iodelay";
+			reg = <0x4844a000 0x0d1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+		};
+
+		target-module@43300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43300000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43300000 0x100000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x100000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+				/*
+				* memcpy is disabled, can be enabled with:
+				* ti,edma-memcpy-channels = <20 21>;
+				* for example. Note that these channels need to be
+				* masked in the xbar as well.
+				*/
+			};
+		};
+
+		target-module@43400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43400000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43400000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@43500000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43500000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43500000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "dmm";
+		};
+
+		ipu1: ipu@58820000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x58820000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu1>;
+			status = "disabled";
+			resets = <&prm_ipu 0>, <&prm_ipu 1>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			firmware-name = "dra7-ipu1-fw.xem4";
+		};
+
+		ipu2: ipu@55020000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu2>;
+			status = "disabled";
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			firmware-name = "dra7-ipu2-fw.xem4";
+		};
+
+		dsp1: dsp@40800000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x40800000 0x48000>,
+			      <0x40e00000 0x8000>,
+			      <0x40f00000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x55c 10>;
+			iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+			status = "disabled";
+			resets = <&prm_dsp1 0>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			firmware-name = "dra7-dsp1-fw.xe66";
+		};
+
+		target-module@40d01000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d01000 0x4>,
+			      <0x40d01010 0x4>,
+			      <0x40d01014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d01000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			};
+		};
+
+		target-module@40d02000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d02000 0x4>,
+			      <0x40d02010 0x4>,
+			      <0x40d02014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d02000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			};
+		};
+
+		target-module@58882000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58882000 0x4>,
+			      <0x58882010 0x4>,
+			      <0x58882014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_ipu 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58882000 0x100>;
+
+			mmu_ipu1: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55082000 0x100>;
+
+			mmu_ipu2: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
+			      <0x4ae0c158 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1160000		0	0x4	0 0x02000000 0x01F00000
+			1210000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_ivahd: regulator-abb-ivahd {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_ivahd";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
+			      <0x4a002470 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x40000000>;
+			/* LDOVBBIVA_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBIVA_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_dspeve: regulator-abb-dspeve {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_dspeve";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
+			      <0x4a00246c 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x20000000>;
+			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBDSPEVE_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_gpu: regulator-abb-gpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_gpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
+			      <0x4ae0c154 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x10000000>;
+			/* LDOVBBGPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBGPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1090000		0	0x0	0 0x02000000 0x01F00000
+			1210000		0	0x4	0 0x02000000 0x01F00000
+			1280000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		qspi: spi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg = <0x4b300000 0x100>,
+			      <0x5c000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			syscon-chipselects = <&scm_conf 0x558>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+			clock-names = "fck";
+			num-cs = <4>;
+			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* OCP2SCP3 */
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
+		};
+
+		/* OCP2SCP1 */
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x37c>;      /* device IO registers */
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma_xbar 4 0>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+		};
+
+		crossbar_mpu: crossbar@4a002a48 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			interrupt-controller;
+			interrupt-parent = <&wakeupgen>;
+			#interrupt-cells = <3>;
+			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <MAX_SOURCES>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+			ti,irqs-skip = <10 133 139 140>;
+			ti,irqs-safe-map = <0>;
+		};
+
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x58000000 0x800000>;
+
+			dss: dss@0 {
+				compatible = "ti,dra7-dss";
+				/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+				/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+				status = "disabled";
+				/* CTRL_CORE_DSS_PLL_CONTROL */
+				syscon-pll-ctrl = <&scm_conf 0x538>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x800000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,dra7-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+						/* CTRL_CORE_SMA_SW_1 */
+						syscon-pol = <&scm_conf 0x534>;
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,dra7-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma_xbar 76>;
+						dma-names = "audio_tx";
+					};
+				};
+			};
+		};
+
+		aes1_target: target-module@4b500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b500080 0x4>,
+			      <0x4b500084 0x4>,
+			      <0x4b500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b500000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		aes2_target: target-module@4b700000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b700080 0x4>,
+			      <0x4b700084 0x4>,
+			      <0x4b700088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b700000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		sham_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		opp_supply_mpu: opp-supply@4a003b20 {
+			compatible = "ti,omap5-opp-supply";
+			reg = <0x4a003b20 0xc>;
+			ti,efuse-settings = <
+			/* uV   offset */
+			1060000 0x0
+			1160000 0x4
+			1210000 0x8
+			>;
+			ti,absolute-max-voltage-uv = <1500000>;
+		};
+
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
+	};
+
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+	coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+	coefficients = <0 2000>;
+};
+
+&core_thermal {
+	coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+	coefficients = <0 2000>;
+};
+
+&iva_thermal {
+	coefficients = <0 2000>;
+};
+
+&cpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&core_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&gpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&dspeve_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&iva_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+#include "dra7-l4.dtsi"
+#include "dra7xx-clocks.dtsi"
+
+&prm {
+	prm_dsp1: prm@400 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_ipu: prm@500 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x500 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_iva: prm@f00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+	};
+
+	prm_dsp2: prm@1b00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b00 0x40>;
+		#reset-cells = <1>;
+	};
+
+	prm_eve1: prm@1b40 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b40 0x40>;
+	};
+
+	prm_eve2: prm@1b80 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b80 0x40>;
+	};
+
+	prm_eve3: prm@1bc0 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1bc0 0x40>;
+	};
+
+	prm_eve4: prm@1c00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c00 0x60>;
+	};
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clock-parents = <&sys_32k_ck>;
+	};
+};
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer16_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
new file mode 100644
index 000000000..cad58f733
--- /dev/null
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra71x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+	model = "TI DRA718 EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vddshv8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&evm_5v0>;
+
+		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&lp8732_buck0_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	poweroff: gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lp8733: lp8733@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&evm_5v0>;
+		ldo1-in-supply =<&evm_5v0>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	lp8732: lp8732@61 {
+		compatible = "ti,lp8732";
+		reg = <0x61>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&vsys_3v3>;
+		ldo1-in-supply =<&vsys_3v3>;
+
+		lp8732_regulators: regulators {
+			lp8732_buck0_reg: buck0 {
+				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+				regulator-name = "lp8732-buck0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8732_buck1_reg: buck1 {
+				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+				regulator-name = "lp8732-buck1";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+				regulator-name = "lp8732-ldo0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+				regulator-name = "lp8732-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pcf_lcd {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+	p0 {
+		/*
+		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
+		 * With this PM_SEL(p3) should not matter
+		 */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "pm_oe_n";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+	vqmmc-supply = <&evm_1v8_sw>;
+};
+
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+/* No Sata on this device */
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+	/* Supplied by VDA_1V8_PLL */
+	vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+	/* Supplied by VDA_1V8_PHY */
+	vdda_video-supply = <&lp8732_ldo1_reg>;
+};
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
new file mode 100644
index 000000000..9c270d8f7
--- /dev/null
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+
+&rtctarget {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
new file mode 100644
index 000000000..b65b2dd09
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+/ {
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm5v0 {
+		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v6: fixedregulator-evm_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&evm_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3 {
+		/* TPS22965DSG */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_3v3_sw>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
+			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * initial state is used here to keep the mdio interface
+		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+		 * VIN2_S0 driven high otherwise Ethernet stops working
+		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+		 */
+		lines-initial-states = <0x0f2b>;
+
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	 * For the existing IOdelay configuration via U-Boot we don't
+	 * support NAND on dra72-evm. Keep it disabled. Enabling it
+	 * requires a different configuration by U-Boot.
+	 */
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		/* To use NAND, DIP switch SW5 must be set like so:
+		 * SW5.1 (NAND_SELn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&evm_3v3_sd>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is a viable alternative
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	max-frequency = <192000000>;
+};
+
+&mmc2 {
+	/* SW5-3 in ON position */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <192000000>;
+};
+
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&evm_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_default>;
+	pinctrl-1 = <&mmc4_pins_default>;
+	pinctrl-2 = <&mmc4_pins_default>;
+	pinctrl-3 = <&mmc4_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
new file mode 100644
index 000000000..f242b937f
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA722 Rev C EVM";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+	};
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+	/* LDO2_OUT --> VDDA_1V8_PHY2 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&hdmi {
+	vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio3>;
+	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
new file mode 100644
index 000000000..7b433f549
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+	compatible = "ti,tps65917";
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,system-power-controller;
+
+	tps65917_pmic {
+		compatible = "ti,tps65917-pmic";
+
+		smps1-in-supply = <&vsys_3v3>;
+		smps2-in-supply = <&vsys_3v3>;
+		smps3-in-supply = <&vsys_3v3>;
+		smps4-in-supply = <&vsys_3v3>;
+		smps5-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+		ldo2-in-supply = <&vsys_3v3>;
+		ldo3-in-supply = <&vsys_3v3>;
+		ldo4-in-supply = <&evm_5v0>;
+		ldo5-in-supply = <&vsys_3v3>;
+
+		tps65917_regulators: regulators {
+			smps1_reg: smps1 {
+				/* VDD_MPU */
+				regulator-name = "smps1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps2_reg: smps2 {
+				/* VDD_CORE */
+				regulator-name = "smps2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps3_reg: smps3 {
+				/* VDD_GPU IVA DSPEVE */
+				regulator-name = "smps3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps4_reg: smps4 {
+				/* VDDS1V8 */
+				regulator-name = "smps4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps5_reg: smps5 {
+				/* VDD_DDR */
+				regulator-name = "smps5";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/* LDO1_OUT --> SDIO  */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-allow-bypass;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allow-bypass;
+			};
+
+			ldo3_reg: ldo3 {
+				/* VDDA_1V8_PHY */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				/* VDDA_1V8_PLL */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				/* VDDA_3V_USB: VDDA_USBHS33 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps65917_power_button {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps65917>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		wakeup-source;
+		ti,palmas-long-press-seconds = <6>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&cpu0 {
+	vdd-supply = <&smps1_reg>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
new file mode 100644
index 000000000..5f62f92eb
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+/ {
+	model = "TI DRA722";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+	};
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&hdmi {
+	vdda-supply = <&ldo3_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio6>;
+	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..a9dce919d
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,361 @@
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ *    'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs1.mmc2_cmd */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc4_pins_default: mmc4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(1375) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63C A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1230) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(76) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65C A_DELAY_PS(99) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(560) G_DELAY_PS(365)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(29) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(47) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(433) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(287) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(351) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(520) G_DELAY_PS(320)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(40) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(83) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(98) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(106) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(51) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(363) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(199) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(273) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x1a4 A_DELAY_PS(119) G_DELAY_PS(0)	/* CFG_GPMC_A20_IN */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_IN */
+			0x1bc A_DELAY_PS(18) G_DELAY_PS(0)	/* CFG_GPMC_A22_IN */
+			0x1c8 A_DELAY_PS(894) G_DELAY_PS(0)	/* CFG_GPMC_A23_IN */
+			0x1d4 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_IN */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1ec A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_GPMC_A26_IN */
+			0x1f8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_IN */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x194 A_DELAY_PS(152) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(206) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(78) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(266) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(150) G_DELAY_PS(95)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(250) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(100) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(870) G_DELAY_PS(415)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(695) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(924) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(719) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(824) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(877) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(446) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(847) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(586) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(1039) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(285) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(189) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(70)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(730) G_DELAY_PS(360)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(70) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(231) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(39) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(176) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(101) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(360) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
new file mode 100644
index 000000000..906172613
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&wakeupgen>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1";
+
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
+	clock-names = "fck", "video1_clk";
+};
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
+
+&pcie1_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
new file mode 100644
index 000000000..325663151
--- /dev/null
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms
+ */
+
+#include "dra7-ipu-dsp-common.dtsi"
+
+&mailbox6 {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		status = "okay";
+	};
+};
+
+&dsp2 {
+	mboxes = <&mailbox6 &mbox_dsp2_ipc3x>;
+	ti,timers = <&timer6>;
+	ti,watchdog-timers = <&timer13>;
+};
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..e86da7a97
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,647 @@
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc4_pins_default: mmc4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_hs: mmc3_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr12: mmc3_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr25: mmc3_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr50: mmc3_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr12: mmc4_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr25: mmc4_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(572) G_DELAY_PS(540)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1525) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(600)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(55) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(403) G_DELAY_PS(120)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63c A_DELAY_PS(23) G_DELAY_PS(60)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(25) G_DELAY_PS(60)	/* CFG_MMC1_DAT2_IN */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(1076) G_DELAY_PS(330)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1271) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(722) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(751) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(20) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63C A_DELAY_PS(256) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(263) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(1063) G_DELAY_PS(17)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(600) G_DELAY_PS(400)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(621) G_DELAY_PS(600)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(300) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(739) G_DELAY_PS(600)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(812) G_DELAY_PS(600)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(954) G_DELAY_PS(600)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(60)  G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(935) G_DELAY_PS(600)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(525) G_DELAY_PS(600)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(767) G_DELAY_PS(600)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(225) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(565) G_DELAY_PS(600)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(60) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(969) G_DELAY_PS(600)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(180) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(274) G_DELAY_PS(0)       /* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(162) G_DELAY_PS(0)       /* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(401) G_DELAY_PS(0)       /* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(73) G_DELAY_PS(0)        /* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(465) G_DELAY_PS(0)       /* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(115) G_DELAY_PS(0)       /* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(633) G_DELAY_PS(0)       /* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(47) G_DELAY_PS(0)        /* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(935) G_DELAY_PS(280)     /* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(621) G_DELAY_PS(0)       /* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(183) G_DELAY_PS(0)       /* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(467) G_DELAY_PS(0)       /* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(262) G_DELAY_PS(0)       /* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(46) G_DELAY_PS(0)        /* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(684) G_DELAY_PS(0)       /* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(76) G_DELAY_PS(0)        /* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(265) G_DELAY_PS(360)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(287) G_DELAY_PS(420)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(144) G_DELAY_PS(240)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(120) G_DELAY_PS(180)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(274) G_DELAY_PS(240)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(514) G_DELAY_PS(360)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(187) G_DELAY_PS(120)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(121) G_DELAY_PS(60)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(406) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(659) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(130) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(169) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(457) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(96) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(582) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(391) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(561) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(2651) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1572) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(1913) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1721) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1891) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(1919) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
new file mode 100644
index 000000000..cfb39dde4
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+
+			vbb-supply = <&abb_mpu>;
+		};
+	};
+
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
+		rproc3 = &dsp2;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&wakeupgen>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ocp {
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
+
+		target-module@41501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41501000 0x4>,
+			      <0x41501010 0x4>,
+			      <0x41501014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41501000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			};
+		};
+
+		target-module@41502000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41502000 0x4>,
+			      <0x41502010 0x4>,
+			      <0x41502014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41502000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			};
+		};
+
+		dsp2: dsp@41000000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x41000000 0x48000>,
+			      <0x41600000 0x8000>,
+			      <0x41700000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x560 10>;
+			iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
+			status = "disabled";
+			resets = <&prm_dsp2 0>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			firmware-name = "dra7-dsp2-fw.xe66";
+		};
+	};
+};
+
+&cpu0_opp_table {
+	opp-shared;
+};
+
+&dss {
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>,
+	      <0x9054 0x4>,
+	      <0x9300 0x20>;
+	reg-names = "dss", "pll1_clkctrl", "pll1",
+		    "pll2_clkctrl", "pll2";
+
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
+	clock-names = "fck", "video1_clk", "video2_clk";
+};
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&pcie1_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
new file mode 100644
index 000000000..9bd01ae40
--- /dev/null
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA762 EVM";
+	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_cma_pool: dsp2_cma@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vsys_12v0: fixedregulator-vsys12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v6: fixedregulator-vio_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3: fixedregulator-vio_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vio_3v3>;
+		enable-active-high;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	vio_1v8: fixedregulator-vio_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps5_reg>;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;	/* gpio5_8 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&vio_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps65917: tps65917@58 {
+		compatible = "ti,tps65917";
+		reg = <0x58>;
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		tps65917_pmic {
+			compatible = "ti,tps65917-pmic";
+
+			smps12-in-supply = <&vsys_3v3>;
+			smps3-in-supply = <&vsys_3v3>;
+			smps4-in-supply = <&vsys_3v3>;
+			smps5-in-supply = <&vsys_3v3>;
+			ldo1-in-supply = <&vsys_3v3>;
+			ldo2-in-supply = <&vsys_3v3>;
+			ldo3-in-supply = <&vsys_5v0>;
+			ldo4-in-supply = <&vsys_5v0>;
+			ldo5-in-supply = <&vsys_3v3>;
+
+			tps65917_regulators: regulators {
+				smps12_reg: smps12 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_CORE */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps4_reg: smps4 {
+					/* VDD_IVA */
+					regulator-name = "smps4";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps5_reg: smps5 {
+					/* VDDS1V8 */
+					regulator-name = "smps5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> VDA_PHY1_1V8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldo2_reg: ldo2 {
+					/* LDO2_OUT --> VDA_PHY2_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-allow-bypass;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDA_USB_3V3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDD_SDIO_DV */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps65917_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps65917>;
+			interrupts = <1 IRQ_TYPE_NONE>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <6>;
+		};
+	};
+
+	lp87565: lp87565@60 {
+		compatible = "ti,lp87565-q1";
+		reg = <0x60>;
+
+		buck10-in-supply =<&vsys_3v3>;
+		buck23-in-supply =<&vsys_3v3>;
+
+		regulators: regulators {
+			buck10_reg: buck10 {
+				/*VDD_MPU*/
+				regulator-name = "buck10";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck23_reg: buck23 {
+				/* VDD_GPU*/
+				regulator-name = "buck23";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf_lcd: pcf8757@20 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pcf_gpio_21: pcf8757@21 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "ti,pcf8575", "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vio_3v3>;
+		IOVDD-supply = <&vio_3v3>;
+		DRVDD-supply = <&vio_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vio_3v3_sd>;
+	vqmmc-supply = <&ldo4_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vio_1v8>;
+	vqmmc-supply = <&vio_1v8>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
+};
+
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&vio_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie1_rc {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&pcie1_ep {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&m_can0 {
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
new file mode 100644
index 000000000..fdca48186
--- /dev/null
+++ b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Texas Instruments
+// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
+// Author: Sekhar Nori <nsekhar@ti.com>
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(489) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(374) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63c A_DELAY_PS(31) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1355) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(4)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(892) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(384) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(350) G_DELAY_PS(174)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(335) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(339) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(219) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(236) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(759) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(372) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL2 in datamanual */
+	mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(852) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(94) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(122) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(57) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(375) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
new file mode 100644
index 000000000..2f3261511
--- /dev/null
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+
+			m_can0: mcan@1a00 {
+				compatible = "bosch,m_can";
+				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+				reg-names = "m_can", "message_ram";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0", "int1";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
+				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+			};
+		};
+	};
+
+};
+
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};
+
+&scm_conf_clocks {
+	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x03fc>;
+		ti,bit-shift=<20>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+		assigned-clock-rates = <80000000>;
+	};
+
+	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+		reg = <0x3fc>;
+		ti,bit-shift = <29>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+	};
+
+	mcan_clk: mcan_clk@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x3fc>;
+	};
+};
+
+&rtctarget {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&mmc3 {
+	/* dra76x is not affected by i887 */
+	max-frequency = <96000000>;
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
new file mode 100644
index 000000000..dc0a93bcc
--- /dev/null
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -0,0 +1,1849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_core_aon_clocks {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+	};
+
+	atl_clkin3_ck: atl_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck@234 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+		assigned-clocks = <&dpll_dsp_ck>;
+		assigned-clock-rates = <600000000>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m2_ck>;
+		assigned-clock-rates = <600000000>;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <1165000000>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m2_ck>;
+		assigned-clock-rates = <388333334>;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck@2d8 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+		assigned-clocks = <&dpll_gpu_ck>;
+		assigned-clock-rates = <1277000000>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_gpu_m2_ck>;
+		assigned-clock-rates = <425666667>;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck@2a8 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck@284 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m3x2_ck>;
+		assigned-clock-rates = <400000000>;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin1: sys_clkin1@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk@11c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk@178 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div@174 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div@1d8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div@120 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux@1dc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div@18c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	gmac_main_clk: gmac_main_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div@184 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div@1c0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div@1b4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div@194 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk@180 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0164>;
+	};
+
+	mlb_clk: mlb_clk@134 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0168>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x016c>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+};
+
+&cm_core_clocks {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
+	apll_pcie_ck: apll_pcie_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+	};
+
+	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,dividers = <2>, <1>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	clkout2_clk: clkout2_clk@6b0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkoutmux2_clk_mux>;
+		ti,bit-shift = <8>;
+		reg = <0x06b0>;
+	};
+
+	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+		assigned-clocks = <&gpu_core_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+		assigned-clocks = <&gpu_hyd_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux@1020 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux@1028 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux@1030 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+};
+
+&cm_core_clockdomains {
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scm_conf_clocks {
+	dss_deshdcp_clk: dss_deshdcp_clk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_iclk_div>;
+		ti,bit-shift = <0>;
+		reg = <0x558>;
+	};
+
+       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0558>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
+};
+
+&cm_core_aon {
+	mpu_cm: mpu-cm@300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpu_clkctrl: mpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dsp1_cm: dsp1-cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		dsp1_clkctrl: dsp1-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	ipu_cm: ipu-cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		ipu1_clkctrl: ipu1-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+			assigned-clock-parents = <&dpll_core_h22x2_ck>;
+		};
+
+		ipu_clkctrl: ipu-clkctrl@50 {
+			compatible = "ti,clkctrl";
+			reg = <0x50 0x34>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dsp2_cm: dsp2-cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		dsp2_clkctrl: dsp2-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	rtc_cm: rtc-cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x60>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x60>;
+
+		rtc_clkctrl: rtc-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x28>;
+			#clock-cells = <2>;
+		};
+	};
+
+	vpe_cm: vpe-cm@760 {
+		compatible = "ti,omap4-cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: vpe-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&cm_core {
+	coreaon_cm: coreaon-cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		coreaon_clkctrl: coreaon-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3main1_cm: l3main1-cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3main1_clkctrl: l3main1-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x74>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	ipu2_cm: ipu2-cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ipu2_clkctrl: ipu2-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dma_cm: dma-cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		dma_clkctrl: dma-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emif_cm: emif-cm@b00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		emif_clkctrl: emif-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	atl_cm: atl-cm@c00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xc00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xc00 0x100>;
+
+		atl_clkctrl: atl-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4cfg_cm: l4cfg-cm@d00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4cfg_clkctrl: l4cfg-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x84>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3instr_cm: l3instr-cm@e00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3instr_clkctrl: l3instr-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	cam_cm: cam-cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		cam_clkctrl: cam-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x2c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dss_cm: dss-cm@1100 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1100 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1100 0x100>;
+
+		dss_clkctrl: dss-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gpu_cm: gpu-cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		gpu_clkctrl: gpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3init_cm: l3init-cm@1300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1300 0x100>;
+
+		l3init_clkctrl: l3init-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x6c>, <0xe0 0x14>;
+			#clock-cells = <2>;
+		};
+
+		pcie_clkctrl: pcie-clkctrl@b0 {
+			compatible = "ti,clkctrl";
+			reg = <0xb0 0xc>;
+			#clock-cells = <2>;
+		};
+
+		gmac_clkctrl: gmac-clkctrl@d0 {
+			compatible = "ti,clkctrl";
+			reg = <0xd0 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	l4per_cm: l4per-cm@1700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1700 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1700 0x300>;
+
+		l4per_clkctrl: l4per-clkctrl@28 {
+			compatible = "ti,clkctrl";
+			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
+			#clock-cells = <2>;
+
+			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			assigned-clock-parents = <&abe_24m_fclk>;
+		};
+
+		l4sec_clkctrl: l4sec-clkctrl@1a0 {
+			compatible = "ti,clkctrl";
+			reg = <0x1a0 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l4per2_clkctrl: l4per2-clkctrl@c {
+			compatible = "ti,clkctrl";
+			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
+			#clock-cells = <2>;
+		};
+
+		l4per3_clkctrl: l4per3-clkctrl@14 {
+			compatible = "ti,clkctrl";
+			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&prm {
+	wkupaon_cm: wkupaon-cm@1800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1800 0x100>;
+
+		wkupaon_clkctrl: wkupaon-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x6c>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
new file mode 100644
index 000000000..bd1f58ae2
--- /dev/null
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E60K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		on {
+			label = "e60k02:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* TODO: CYTTSP5 touch controller at 0x24 */
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
new file mode 100644
index 000000000..f6eb71553
--- /dev/null
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda ECX-2000";
+	compatible = "calxeda,ecx-2000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
+	};
+
+	memory@200000000 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+
+		timer {
+			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+		};
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,ecx-2000-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff12000 0x2000>,
+			      <0xfff14000 0x2000>,
+			      <0xfff16000 0x2000>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
new file mode 100644
index 000000000..57a028a69
--- /dev/null
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyAMA0";
+	};
+
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000002>;
+		cpu_off		= <0x84000004>;
+		cpu_on		= <0x84000006>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+
+		sata@ffe08000 {
+			compatible = "calxeda,hb-ahci";
+			reg = <0xffe08000 0x10000>;
+			interrupts = <0 83 4>;
+			dma-coherent;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
+			calxeda,led-order = <4 0 1 2 3>;
+		};
+
+		sdhci@ffe0e000 {
+			compatible = "calxeda,hb-sdhci";
+			reg = <0xffe0e000 0x1000>;
+			interrupts = <0 90 4>;
+			clocks = <&eclk>;
+			status = "disabled";
+		};
+
+		ipc@fff20000 {
+			compatible = "arm,pl320", "arm,primecell";
+			reg = <0xfff20000 0x1000>;
+			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpioe: gpio@fff30000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff30000 0x1000>;
+			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiof: gpio@fff31000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff31000 0x1000>;
+			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiog: gpio@fff32000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff32000 0x1000>;
+			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpioh: gpio@fff33000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff33000 0x1000>;
+			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		timer@fff34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfff34000 0x1000>;
+			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@fff35000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0xfff35000 0x1000>;
+			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial@fff36000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfff36000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smic@fff3a000 {
+			compatible = "ipmi-smic";
+			device_type = "ipmi";
+			reg = <0xfff3a000 0x1000>;
+			interrupts = <0 24 4>;
+			reg-size = <4>;
+			reg-spacing = <4>;
+		};
+
+		sregs@fff3c000 {
+			compatible = "calxeda,hb-sregs";
+			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
+		};
+
+		dma@fff3d000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfff3d000 0x1000>;
+			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		ethernet@fff50000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff50000 0x1000>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+			dma-coherent;
+		};
+
+		ethernet@fff51000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff51000 0x1000>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
+			dma-coherent;
+		};
+
+		combophy0: combo-phy@fff58000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff58000 0x1000>;
+			phydev = <5>;
+		};
+
+		combophy5: combo-phy@fff5d000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff5d000 0x1000>;
+			phydev = <31>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
new file mode 100644
index 000000000..adfa559a4
--- /dev/null
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for EFM32GG-DK3750 development board.
+ *
+ * Documentation available from
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
+ */
+
+/dts-v1/;
+#include "efm32gg.dtsi"
+
+/ {
+	model = "Energy Micro Giant Gecko Development Kit";
+	compatible = "efm32,dk3750";
+
+	chosen {
+		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
+	};
+
+	memory@88000000 {
+		device_type = "memory";
+		reg = <0x88000000 0x400000>;
+	};
+
+	soc {
+		adc@40002000 {
+			status = "ok";
+		};
+
+		i2c@4000a000 {
+			energymicro,location = <3>;
+			status = "ok";
+
+			temp@48 {
+				compatible = "st,stds75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "microchip,24c02", "atmel,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+		};
+
+		spi0: spi@4000c000 { /* USART0 */
+			cs-gpios = <&gpio 68 1>; // E4
+			energymicro,location = <1>;
+			status = "ok";
+
+			microsd@0 {
+				compatible = "mmc-spi-slot";
+				spi-max-frequency = <100000>;
+				voltage-ranges = <3200 3400>;
+				broken-cd;
+				reg = <0>;
+			};
+		};
+
+		spi1: spi@4000c400 { /* USART1 */
+			cs-gpios = <&gpio 51 1>; // D3
+			energymicro,location = <1>;
+			status = "ok";
+
+			ks8851@0 {
+				compatible = "ks8851";
+				spi-max-frequency = <6000000>;
+				reg = <0>;
+				interrupt-parent = <&boardfpga>;
+				interrupts = <4>;
+			};
+		};
+
+		uart4: uart@4000e400 { /* UART1 */
+			energymicro,location = <2>;
+			status = "ok";
+		};
+
+		boardfpga: boardfpga@80000000 {
+			compatible = "efm32board";
+			reg = <0x80000000 0x400>;
+			irq-gpios = <&gpio 64 1>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
new file mode 100644
index 000000000..8a58e4914
--- /dev/null
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Energy Micro EFM32 Giant Gecko SoC.
+ *
+ * Documentation available from
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
+ */
+
+#include "armv7-m.dtsi"
+#include "dt-bindings/clock/efm32-cmu.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	soc {
+		adc: adc@40002000 {
+			compatible = "energymicro,efm32-adc";
+			reg = <0x40002000 0x400>;
+			interrupts = <7>;
+			clocks = <&cmu clk_HFPERCLKADC0>;
+			status = "disabled";
+		};
+
+		gpio: gpio@40006000 {
+			compatible = "energymicro,efm32-gpio";
+			reg = <0x40006000 0x1000>;
+			interrupts = <1 11>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&cmu clk_HFPERCLKGPIO>;
+			status = "ok";
+		};
+
+		i2c0: i2c@4000a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "energymicro,efm32-i2c";
+			reg = <0x4000a000 0x400>;
+			interrupts = <9>;
+			clocks = <&cmu clk_HFPERCLKI2C0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4000a400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "energymicro,efm32-i2c";
+			reg = <0x4000a400 0x400>;
+			interrupts = <10>;
+			clocks = <&cmu clk_HFPERCLKI2C1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		spi0: spi@4000c000 { /* USART0 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "energymicro,efm32-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <3 4>;
+			clocks = <&cmu clk_HFPERCLKUSART0>;
+			status = "disabled";
+		};
+
+		spi1: spi@4000c400 { /* USART1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "energymicro,efm32-spi";
+			reg = <0x4000c400 0x400>;
+			interrupts = <15 16>;
+			clocks = <&cmu clk_HFPERCLKUSART1>;
+			status = "disabled";
+		};
+
+		spi2: spi@4000c800 { /* USART2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "energymicro,efm32-spi";
+			reg = <0x4000c800 0x400>;
+			interrupts = <18 19>;
+			clocks = <&cmu clk_HFPERCLKUSART2>;
+			status = "disabled";
+		};
+
+		uart0: uart@4000c000 { /* USART0 */
+			compatible = "energymicro,efm32-uart";
+			reg = <0x4000c000 0x400>;
+			interrupts = <3 4>;
+			clocks = <&cmu clk_HFPERCLKUSART0>;
+			status = "disabled";
+		};
+
+		uart1: uart@4000c400 { /* USART1 */
+			compatible = "energymicro,efm32-uart";
+			reg = <0x4000c400 0x400>;
+			interrupts = <15 16>;
+			clocks = <&cmu clk_HFPERCLKUSART1>;
+			status = "disabled";
+		};
+
+		uart2: uart@4000c800 { /* USART2 */
+			compatible = "energymicro,efm32-uart";
+			reg = <0x4000c800 0x400>;
+			interrupts = <18 19>;
+			clocks = <&cmu clk_HFPERCLKUSART2>;
+			status = "disabled";
+		};
+
+		uart3: uart@4000e000 { /* UART0 */
+			compatible = "energymicro,efm32-uart";
+			reg = <0x4000e000 0x400>;
+			interrupts = <20 21>;
+			clocks = <&cmu clk_HFPERCLKUART0>;
+			status = "disabled";
+		};
+
+		uart4: uart@4000e400 { /* UART1 */
+			compatible = "energymicro,efm32-uart";
+			reg = <0x4000e400 0x400>;
+			interrupts = <22 23>;
+			clocks = <&cmu clk_HFPERCLKUART1>;
+			status = "disabled";
+		};
+
+		timer0: timer@40010000 {
+			compatible = "energymicro,efm32-timer";
+			reg = <0x40010000 0x400>;
+			interrupts = <2>;
+			clocks = <&cmu clk_HFPERCLKTIMER0>;
+		};
+
+		timer1: timer@40010400 {
+			compatible = "energymicro,efm32-timer";
+			reg = <0x40010400 0x400>;
+			interrupts = <12>;
+			clocks = <&cmu clk_HFPERCLKTIMER1>;
+		};
+
+		timer2: timer@40010800 {
+			compatible = "energymicro,efm32-timer";
+			reg = <0x40010800 0x400>;
+			interrupts = <13>;
+			clocks = <&cmu clk_HFPERCLKTIMER2>;
+		};
+
+		timer3: timer@40010c00 {
+			compatible = "energymicro,efm32-timer";
+			reg = <0x40010c00 0x400>;
+			interrupts = <14>;
+			clocks = <&cmu clk_HFPERCLKTIMER3>;
+		};
+
+		cmu: cmu@400c8000 {
+			compatible = "efm32gg,cmu";
+			reg = <0x400c8000 0x400>;
+			interrupts = <32>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 000000000..d87ee4794
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
new file mode 100644
index 000000000..0a27f034d
--- /dev/null
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ */
+/dts-v1/;
+
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d", "renesas,emev2";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		one {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-1";
+			linux,code = <KEY_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		two {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-2";
+			linux,code = <KEY_2>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		three {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-3";
+			linux,code = <KEY_3>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		four {
+			debounce-interval = <50>;
+			wakeup-source;
+			label = "DSW2-4";
+			linux,code = <KEY_4>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ethernet@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};
+
+&iic0 {
+	status = "okay";
+};
+
+&iic1 {
+	status = "okay";
+};
+
+&pfc {
+	uart1_pins: uart1 {
+		groups = "uart1_ctrl", "uart1_data";
+		function = "uart1";
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
new file mode 100644
index 000000000..ecfaa0b75
--- /dev/null
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Emma Mobile EV2 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,emev2";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &iic0;
+		i2c1 = &iic1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <533000000>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <533000000>;
+		};
+	};
+
+	gic: interrupt-controller@e0020000 {
+		compatible = "arm,pl390";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xe0028000 0x1000>,
+		      <0xe0020000 0x0100>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clocks@e0110000 {
+		compatible = "renesas,emev2-smu";
+		reg = <0xe0110000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		c32ki: c32ki {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+		iic0_sclkdiv: iic0_sclkdiv@624,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic0_sclk: iic0_sclk@48c,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x48c 1>;
+			clocks = <&iic0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		iic1_sclkdiv: iic1_sclkdiv@624,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic1_sclk: iic1_sclk@490,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x490 1>;
+			clocks = <&iic1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		pll3_fo: pll3_fo {
+			compatible = "fixed-factor-clock";
+			clocks = <&c32ki>;
+			clock-div = <1>;
+			clock-mult = <7000>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x610 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x660 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclk: usia_u0_sclk@4a0,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4a0 1>;
+			clocks = <&usia_u0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclk: usib_u1_sclk@4b8,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4b8 1>;
+			clocks = <&usib_u1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclk: usib_u2_sclk@4bc,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4bc 1>;
+			clocks = <&usib_u2_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclk: usib_u3_sclk@4c0,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4c0 1>;
+			clocks = <&usib_u3_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		sti_sclk: sti_sclk@528,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x528 1>;
+			clocks = <&c32ki>;
+			#clock-cells = <0>;
+		};
+	};
+
+	timer@e0180000 {
+		compatible = "renesas,em-sti";
+		reg = <0xe0180000 0x54>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sti_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart0: serial@e1020000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1020000 0x38>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usia_u0_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart1: serial@e1030000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1030000 0x38>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u1_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart2: serial@e1040000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1040000 0x38>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u2_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart3: serial@e1050000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1050000 0x38>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u3_sclk>;
+		clock-names = "sclk";
+	};
+
+	pfc: pinctrl@e0140200 {
+		compatible = "renesas,pfc-emev2";
+		reg = <0xe0140200 0x100>;
+	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 31>;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	iic0: i2c@e0070000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe0070000 0x28>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic0_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+
+	iic1: i2c@e10a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe10a0000 0x28>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic1_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
new file mode 100644
index 000000000..365931f8b
--- /dev/null
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Cirrus Logic EP7209";
+	compatible = "cirrus,ep7209";
+
+	aliases {
+		gpio0 = &porta;
+		gpio1 = &portb;
+		gpio3 = &portd;
+		gpio4 = &porte;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		spi0 = &spi;
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm720t";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		clks: clks@80000000 {
+			#clock-cells = <1>;
+			compatible = "cirrus,ep7209-clk";
+			reg = <0x80000000 0xc000>;
+			startup-frequency = <73728000>;
+		};
+
+		intc: intc@80000000 {
+			compatible = "cirrus,ep7209-intc";
+			reg = <0x80000000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		porta: gpio@80000000 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000000 0x1 0x80000040 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portb: gpio@80000001 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000001 0x1 0x80000041 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portd: gpio@80000003 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000003 0x1 0x80000043 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		porte: gpio@80000083 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000083 0x1 0x800000c3 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		syscon1: syscon@80000100 {
+			compatible = "cirrus,ep7209-syscon1", "syscon";
+			reg = <0x80000100 0x80>;
+		};
+
+		bus: bus@80000180 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "cirrus,ep7209-bus", "simple-bus";
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			reg = <0x80000180 0x80>;
+			ranges = <
+				0 0 0x00000000 0x10000000
+				1 0 0x10000000 0x10000000
+				2 0 0x20000000 0x10000000
+				3 0 0x30000000 0x10000000
+				4 0 0x40000000 0x10000000
+				5 0 0x50000000 0x10000000
+				6 0 0x60000000 0x0000c000
+				7 0 0x70000000 0x00000080
+			>;
+		};
+
+		fb: fb@800002c0 {
+			compatible = "cirrus,ep7209-fb";
+			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			status = "disabled";
+		};
+
+		timer1: timer@80000300 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000300 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER1>;
+			interrupts = <8>;
+		};
+
+		timer2: timer@80000340 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000340 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER2>;
+			interrupts = <9>;
+		};
+
+		pwm: pwm@80000400 {
+			compatible = "cirrus,ep7209-pwm";
+			reg = <0x80000400 0x4>;
+			clocks = <&clks CLPS711X_CLK_PWM>;
+			#pwm-cells = <1>;
+		};
+
+		uart1: uart@80000480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80000480 0x80>;
+			interrupts = <12 13>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon1>;
+		};
+
+		spi: spi@80000500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cirrus,ep7209-spi";
+			reg = <0x80000500 0x4>;
+			interrupts = <15>;
+			clocks = <&clks CLPS711X_CLK_SPI>;
+			status = "disabled";
+		};
+
+		syscon2: syscon@80001100 {
+			compatible = "cirrus,ep7209-syscon2", "syscon";
+			reg = <0x80001100 0x80>;
+		};
+
+		uart2: uart@80001480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80001480 0x80>;
+			interrupts = <28 29>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon2>;
+		};
+
+		dai: dai@80002000 {
+			#sound-dai-cells = <0>;
+			compatible = "cirrus,ep7209-dai";
+			reg = <0x80002000 0x604>;
+			clocks = <&clks CLPS711X_CLK_PLL>;
+			clock-names = "pll";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		syscon3: syscon@80002200 {
+			compatible = "cirrus,ep7209-syscon3", "syscon";
+			reg = <0x80002200 0x40>;
+		};
+	};
+
+	mctrl: mctrl {
+		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
new file mode 100644
index 000000000..da076479c
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cirrus Logic EP7211 Development Board";
+	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+	memory {
+		device_type = "memory";
+		reg = <0xc0000000 0x02000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0>;
+		brightness-levels = <
+			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+		>;
+		default-brightness-level = <0x0>;
+		power-supply = <&blen>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+			<&portd 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	lcddc: lcddc {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	blen: blen {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bus {
+	flash: nor@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fb {
+	display = <&display>;
+	lcd-supply = <&lcddc>;
+	status = "okay";
+};
+
+&portd {
+	lcden {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LCD ENABLE";
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi
new file mode 100644
index 000000000..32a4e1237
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 000000000..ad7a08502
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs>;
+				pinctrl-names = "default";
+
+				nand: nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						root@0 {
+							label = "root";
+							reg = <0x0 0x08000000>;
+						};
+
+						data@20000 {
+							label = "data";
+							reg = <0x08000000 0x38000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
new file mode 100644
index 000000000..6d519d02d
--- /dev/null
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+	compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+};
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000..1dbf3bbff
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region_mfc_left {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x2400000>;
+			alignment = <0x100000>;
+		};
+
+		mfc_right: region_mfc_right {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x800000>;
+			alignment = <0x100000>;
+		};
+	};
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000..ecf416690
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ */
+
+&pmu_system_controller {
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_system_controller>;
+		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		mask = <0x5200>; /* reset value */
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&pmu_system_controller>;
+		offset = <0x0400>; /* SWRESET */
+		mask = <0x1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
new file mode 100644
index 000000000..20446a846
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 evaluation board
+ * which is based on Samsung Exynos3250 SoC.
+ */
+
+/dts-v1/;
+#include "exynos3250-artik5.dtsi"
+
+/ {
+	model = "Samsung ARTIK5 evaluation board";
+	compatible = "samsung,artik5-eval", "samsung,artik5",
+			"samsung,exynos3250", "samsung,exynos3";
+};
+
+&mshc_2 {
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&ldo3_reg>;
+	card-detect-delay = <200>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
new file mode 100644
index 000000000..ad525f2ac
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based ARTIK5 module device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 module which is based on
+ * Samsung Exynos3250 SoC.
+ */
+
+#include "exynos3250.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1f800000>;
+	};
+
+	firmware@205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205f000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx3>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps14_irq>;
+		reg = <0x66>;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				/* VDD_ALIVE15x */
+				regulator-name = "VLDO1_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* VDDQM176 ~ VDDQM185 */
+				regulator-name = "VLDO2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/*
+				 * VDD1_E106 ~ VDD1_E111
+				 * DVDD_RTC_AP, DVDD_MMC2_AP
+				 */
+				regulator-name = "VLDO3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
+				regulator-name = "VLDO4_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
+				regulator-name = "VLDO5_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_USB, VDD10_HSIC */
+				regulator-name = "VLDO6_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/*
+				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
+				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
+				 */
+				regulator-name = "VLDO7_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				/* AVDD33_UOTG */
+				regulator-name = "VLDO8_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				/* VDDQ_E86 ~ VDDQ_E105*/
+				regulator-name = "VLDO9_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VLDO10_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				/* VDD74 ~ VDD75 */
+				regulator-name = "VLDO11_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				/* VDD72 ~ VDD73 */
+				regulator-name = "VLDO12_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VLDO13_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VLDO14_2.7V";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VLDO_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VLDO16_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VLDO17_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo18_reg: LDO18 {
+				/* DVDD_MMC2_AP */
+				regulator-name = "VLDO18_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLDO19_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VLDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VLDO21_1.25V";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VLDO22_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo23_reg: LDO23 {
+				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
+				regulator-name = "VLDO23_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VLDO24_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VLDO25_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				/* VDD_MIF */
+				regulator-name = "VBUCK1_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				/* VDD_CPU */
+				regulator-name = "VBUCK2_1.2V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				/* VDD_G3D */
+				regulator-name = "VBUCK3_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VBUCK4_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VBUCK5_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	non-removable;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&mshc_1 {
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	non-removable;
+	keep-power-in-suspend;
+	fifo-depth = <0x40>;
+	vqmmc-supply = <&ldo11_reg>;
+	/*
+	 * Voltage negotiation is broken for the SDIO periph so we
+	 * can't actually set the voltage here.
+	 * vmmc-supply = <&ldo23_reg>;
+	 */
+	card-detect-delay = <500>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&pinctrl_1 {
+	bten: bten {
+		samsung,pins ="gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlanen: wlanen {
+		samsung,pins = "gpx2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+		samsung,pin-val = <1>;
+	};
+
+	s2mps14_irq: s2mps14-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bthostwake: bthostwake {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	btwake: btwake {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bten &btwake &bthostwake>;
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
+};
+
+&tmu {
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
new file mode 100644
index 000000000..7e99e5812
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based Monk board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Monk board which is based on
+ * Samsung Exynos3250 SoC.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	model = "Samsung Monk board";
+	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		i2c7 = &i2c_max77836;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1ff00000>;
+	};
+
+	firmware@205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power_key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vemmc_reg: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_EMMC_2.8V-fixed";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	i2c_max77836: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max77836: subpmic@25 {
+			compatible = "maxim,max77836";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_NONE>;
+			reg = <0x25>;
+			wakeup-source;
+
+			muic: max77836-muic {
+				compatible = "maxim,max77836-muic";
+			};
+
+			regulators {
+				compatible = "maxim,max77836-regulator";
+				safeout_reg: SAFEOUT {
+					regulator-name = "SAFEOUT";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <45000>;
+					regulator-max-microamp = <475000>;
+					regulator-boot-on;
+				};
+
+				motor_reg: LDO1 {
+					regulator-name = "MOT_2.7V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <2700000>;
+				};
+
+				LDO2 {
+					regulator-name = "UNUSED_LDO2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <3950000>;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77836-charger";
+
+				maxim,constant-uvolt = <4350000>;
+				maxim,fast-charge-uamp = <225000>;
+				maxim,eoc-uamp = <7500>;
+				maxim,ovp-uvolt = <6500000>;
+			};
+		};
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Correspond to 500MHz at freq_table */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Correspond to 200MHz at freq_table */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+
+	thermistor-ap {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 1>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&exynos_usbphy {
+	vbus-supply = <&safeout_reg>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x66>;
+		wakeup-source;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_AP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VAP_AVDD_PLL1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VAP_PLL_ISO_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VAP_MIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VAP_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VAP_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "V_LPDDR_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "UNUSED_LDO10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "V_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "V_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VSENSOR_2.85V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "UNUSED_LDO14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "LCD_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "UNUSED_LDO17";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "UNUSED_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LCD_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "UNUSED_LDO21";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "UNUSED_LDO22";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "UNUSED_LDO23";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "UNUSED_LDO24";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VAP_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VAP_INT3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VCC_SUB_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77836-battery";
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x36>;
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&mshc_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	broken-cd;
+	non-removable;
+	cap-mmc-highspeed;
+	desc-num = <4>;
+	mmc-hs200-1_8v;
+	card-detect-delay = <200>;
+	vmmc-supply = <&vemmc_reg>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, DOWN);
+		PIN_SLP(gpa0-1, INPUT, DOWN);
+		PIN_SLP(gpa0-2, INPUT, DOWN);
+		PIN_SLP(gpa0-3, INPUT, DOWN);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, PREV, NONE);
+		PIN_SLP(gpb-1, PREV, NONE);
+		PIN_SLP(gpb-2, PREV, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpe0-0, PREV, NONE);
+		PIN_SLP(gpe0-1, PREV, NONE);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, PREV, NONE);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, PREV, NONE);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, INPUT, DOWN);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+		PIN_SLP(gpe1-5, INPUT, DOWN);
+		PIN_SLP(gpe1-6, INPUT, DOWN);
+		PIN_SLP(gpe1-7, INPUT, NONE);
+
+		PIN_SLP(gpe2-0, INPUT, NONE);
+		PIN_SLP(gpe2-1, INPUT, NONE);
+		PIN_SLP(gpe2-2, INPUT, NONE);
+
+		PIN_SLP(gpk0-0, INPUT, DOWN);
+		PIN_SLP(gpk0-1, INPUT, DOWN);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, INPUT, DOWN);
+		PIN_SLP(gpk0-4, INPUT, DOWN);
+		PIN_SLP(gpk0-5, INPUT, DOWN);
+		PIN_SLP(gpk0-6, INPUT, DOWN);
+		PIN_SLP(gpk0-7, INPUT, DOWN);
+
+		PIN_SLP(gpk1-0, PREV, NONE);
+		PIN_SLP(gpk1-1, PREV, NONE);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, DOWN);
+		PIN_SLP(gpm1-3, INPUT, DOWN);
+		PIN_SLP(gpm1-4, INPUT, DOWN);
+		PIN_SLP(gpm1-5, INPUT, DOWN);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, DOWN);
+		PIN_SLP(gpm2-1, INPUT, DOWN);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, INPUT, DOWN);
+		PIN_SLP(gpm3-1, INPUT, DOWN);
+		PIN_SLP(gpm3-2, INPUT, DOWN);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
new file mode 100644
index 000000000..dff3c6e3a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_OUT(_pin, _drv)						\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_OUT_SET(_pin, _val, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+		samsung,pin-val = <_val>;				\
+	}
+
+#define PIN_CFG(_pin, _sel, _pull, _drv)				\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <_sel>;				\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
new file mode 100644
index 000000000..bbf01f76c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -0,0 +1,918 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based Rinato board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Rinato board which is based on
+ * Samsung Exynos3250 SoC.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	model = "Samsung Rinato board";
+	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		i2c7 = &i2c_max77836;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1ff00000>;
+	};
+
+	firmware@205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power_key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	wlan_pwrseq: mshc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max77836: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max77836: subpmic@25 {
+			compatible = "maxim,max77836";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_NONE>;
+			reg = <0x25>;
+			wakeup-source;
+
+			muic: max77836-muic {
+				compatible = "maxim,max77836-muic";
+			};
+
+			regulators {
+				compatible = "maxim,max77836-regulator";
+				safeout_reg: SAFEOUT {
+					regulator-name = "SAFEOUT";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <45000>;
+					regulator-max-microamp = <475000>;
+					regulator-boot-on;
+				};
+
+				motor_reg: LDO1 {
+					regulator-name = "MOT_2.7V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <2700000>;
+				};
+
+				LDO2 {
+					regulator-name = "UNUSED_LDO2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <3950000>;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77836-charger";
+
+				maxim,constant-uvolt = <4350000>;
+				maxim,fast-charge-uamp = <225000>;
+				maxim,eoc-uamp = <7500>;
+				maxim,ovp-uvolt = <6500000>;
+			};
+		};
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+
+	thermistor-ap {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 1>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_lcd0 {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mcuisp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_isp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peril {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safeout_reg>;
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo6_reg>;
+	samsung,burst-clock-frequency = <250000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fimd {
+	status = "okay";
+
+	i80-if-timings {
+		cs-setup = <0>;
+		wr-setup = <0>;
+		wr-active = <1>;
+		wr-hold = <0>;
+	};
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x66>;
+		wakeup-source;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_AP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VAP_AVDD_PLL1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VAP_PLL_ISO_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VAP_VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VAP_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VAP_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "V_LPDDR_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "UNUSED_LDO10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "V_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "V_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "CAM_AVDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "UNUSED_LDO14";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "LCD_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_IRLED_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LCD_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_DVDD_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "HRM_VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "HRM_VCC_3.3V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VAP_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VAP_INT3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VCC_SUB_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77836-battery";
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x36>;
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&jpeg {
+	status = "okay";
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	cap-mmc-highspeed;
+	desc-num = <4>;
+	mmc-hs200-1_8v;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&mshc_1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial0 &sleep0>;
+
+	initial0: initial-state {
+		PIN_IN(gpa1-4, DOWN, LV1);
+		PIN_IN(gpa1-5, DOWN, LV1);
+
+		PIN_IN(gpc0-0, DOWN, LV1);
+		PIN_IN(gpc0-1, DOWN, LV1);
+		PIN_IN(gpc0-2, DOWN, LV1);
+		PIN_IN(gpc0-3, DOWN, LV1);
+		PIN_IN(gpc0-4, DOWN, LV1);
+
+		PIN_IN(gpd0-0, DOWN, LV1);
+		PIN_IN(gpd0-1, DOWN, LV1);
+	};
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, DOWN);
+		PIN_SLP(gpa0-1, INPUT, DOWN);
+		PIN_SLP(gpa0-2, INPUT, DOWN);
+		PIN_SLP(gpa0-3, INPUT, DOWN);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, PREV, NONE);
+		PIN_SLP(gpb-1, PREV, NONE);
+		PIN_SLP(gpb-2, PREV, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpe0-6, DOWN, LV1);
+		PIN_IN(gpe0-7, DOWN, LV1);
+
+		PIN_IN(gpe1-0, DOWN, LV1);
+		PIN_IN(gpe1-3, DOWN, LV1);
+		PIN_IN(gpe1-4, DOWN, LV1);
+		PIN_IN(gpe1-5, DOWN, LV1);
+		PIN_IN(gpe1-6, DOWN, LV1);
+
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+
+		PIN_IN(gpm0-0, DOWN, LV1);
+		PIN_IN(gpm0-1, DOWN, LV1);
+		PIN_IN(gpm0-2, DOWN, LV1);
+		PIN_IN(gpm0-3, DOWN, LV1);
+		PIN_IN(gpm0-4, DOWN, LV1);
+		PIN_IN(gpm0-5, DOWN, LV1);
+		PIN_IN(gpm0-6, DOWN, LV1);
+		PIN_IN(gpm0-7, DOWN, LV1);
+
+		PIN_IN(gpm1-0, DOWN, LV1);
+		PIN_IN(gpm1-1, DOWN, LV1);
+		PIN_IN(gpm1-2, DOWN, LV1);
+		PIN_IN(gpm1-3, DOWN, LV1);
+		PIN_IN(gpm1-4, DOWN, LV1);
+		PIN_IN(gpm1-5, DOWN, LV1);
+		PIN_IN(gpm1-6, DOWN, LV1);
+
+		PIN_IN(gpm2-0, DOWN, LV1);
+		PIN_IN(gpm2-1, DOWN, LV1);
+
+		PIN_IN(gpm3-0, DOWN, LV1);
+		PIN_IN(gpm3-1, DOWN, LV1);
+		PIN_IN(gpm3-2, DOWN, LV1);
+		PIN_IN(gpm3-3, DOWN, LV1);
+		PIN_IN(gpm3-4, DOWN, LV1);
+
+		PIN_IN(gpm4-1, DOWN, LV1);
+		PIN_IN(gpm4-2, DOWN, LV1);
+		PIN_IN(gpm4-3, DOWN, LV1);
+		PIN_IN(gpm4-4, DOWN, LV1);
+		PIN_IN(gpm4-5, DOWN, LV1);
+		PIN_IN(gpm4-6, DOWN, LV1);
+		PIN_IN(gpm4-7, DOWN, LV1);
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpe0-0, PREV, NONE);
+		PIN_SLP(gpe0-1, PREV, NONE);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, UP);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, PREV, NONE);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, INPUT, DOWN);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+		PIN_SLP(gpe1-5, INPUT, DOWN);
+		PIN_SLP(gpe1-6, INPUT, DOWN);
+		PIN_SLP(gpe1-7, INPUT, NONE);
+
+		PIN_SLP(gpe2-0, INPUT, NONE);
+		PIN_SLP(gpe2-1, INPUT, NONE);
+		PIN_SLP(gpe2-2, INPUT, NONE);
+
+		PIN_SLP(gpk0-0, INPUT, DOWN);
+		PIN_SLP(gpk0-1, INPUT, DOWN);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, INPUT, DOWN);
+		PIN_SLP(gpk0-4, INPUT, DOWN);
+		PIN_SLP(gpk0-5, INPUT, DOWN);
+		PIN_SLP(gpk0-6, INPUT, DOWN);
+		PIN_SLP(gpk0-7, INPUT, DOWN);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, INPUT, DOWN);
+		PIN_SLP(gpk1-4, INPUT, DOWN);
+		PIN_SLP(gpk1-5, INPUT, DOWN);
+		PIN_SLP(gpk1-6, INPUT, DOWN);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, DOWN);
+		PIN_SLP(gpm1-3, INPUT, DOWN);
+		PIN_SLP(gpm1-4, INPUT, DOWN);
+		PIN_SLP(gpm1-5, INPUT, DOWN);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, DOWN);
+		PIN_SLP(gpm2-1, INPUT, DOWN);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, INPUT, DOWN);
+		PIN_SLP(gpm3-1, INPUT, DOWN);
+		PIN_SLP(gpm3-2, INPUT, DOWN);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
new file mode 100644
index 000000000..a1e93fb7f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -0,0 +1,952 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4-cpu-thermal.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,exynos3250";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		mshc2 = &mshc_2;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
+		};
+	};
+
+	xusbxti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xusbxti";
+	};
+
+	xxti: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xxti";
+	};
+
+	xtcxo: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xtcxo";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@3f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x3f000 0x1000>;
+			};
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos3-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos3250-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			clock-names = "clkout8";
+			clocks = <&cmu CLK_FIN_PLL>;
+			#clock-cells = <1>;
+		};
+
+		mipi_phy: video-phy {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
+		};
+
+		pd_cam: power-domain@10023c00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+			#power-domain-cells = <0>;
+			label = "CAM";
+		};
+
+		pd_mfc: power-domain@10023c40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		pd_g3d: power-domain@10023c60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		pd_lcd0: power-domain@10023c80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+			#power-domain-cells = <0>;
+			label = "LCD0";
+		};
+
+		pd_isp: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos3250-cmu";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+			assigned-clocks = <&cmu CLK_MOUT_ACLK_400_MCUISP_SUB>,
+					  <&cmu CLK_MOUT_ACLK_266_SUB>;
+			assigned-clock-parents = <&cmu CLK_FIN_PLL>,
+						 <&cmu CLK_FIN_PLL>;
+		};
+
+		cmu_dmc: clock-controller@105c0000 {
+			compatible = "samsung,exynos3250-cmu-dmc";
+			reg = <0x105C0000 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		tmu: tmu@100c0000 {
+			compatible = "samsung,exynos3250-tmu";
+			reg = <0x100C0000 0x100>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_TMU_APBIF>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x2000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		timer@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		jpeg: codec@11830000 {
+			compatible = "samsung,exynos3250-jpeg";
+			reg = <0x11830000 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
+			clock-names = "jpeg", "sclk";
+			power-domains = <&pd_cam>;
+			assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
+			assigned-clock-rates = <0>, <150000000>;
+			assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
+			iommus = <&sysmmu_jpeg>;
+			status = "disabled";
+		};
+
+		sysmmu_jpeg: sysmmu@11a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a60000 0x1000>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		fimd: fimd@11c00000 {
+			compatible = "samsung,exynos3250-fimd";
+			reg = <0x11c00000 0x30000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_fimd0>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		dsi_0: dsi@11c80000 {
+			compatible = "samsung,exynos3250-mipi-dsi";
+			reg = <0x11C80000 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,phy-type = <0>;
+			power-domains = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sysmmu_fimd0: sysmmu@11e20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11e20000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
+		hsotg: hsotg@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0x12480000 0x20000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_USBOTG>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_2: mshc@12530000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12530000 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		exynos_usbphy: exynos-usbphy@125b0000 {
+			compatible = "samsung,exynos3250-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		adc: adc@126c0000 {
+			compatible = "samsung,exynos3250-adc";
+			reg = <0x126C0000 0x100>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "adc", "sclk";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "samsung,exynos4210-mali", "arm,mali-400";
+			reg = <0x13000000 0x10000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3",
+					  "pmu";
+			clocks = <&cmu CLK_G3D>,
+				 <&cmu CLK_SCLK_G3D>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_g3d>;
+			status = "disabled";
+			/* TODO: operating points for DVFS, assigned clock as 134 MHz */
+		};
+
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x13400000 0x10000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "mfc", "sclk_mfc";
+			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+			power-domains = <&pd_mfc>;
+			iommus = <&sysmmu_mfc>;
+		};
+
+		sysmmu_mfc: sysmmu@13620000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13620000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_data &uart0_fctl>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_data>;
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_data>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138a0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138c0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2s2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pwm: pwm@139d0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&cmu CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&cmu CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_camif: ppmu_camif@11ac0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11ac0000 0x2000>;
+			clocks = <&cmu CLK_PPMUCAMIF>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_lcd0: ppmu_lcd0@11e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11e40000 0x2000>;
+			clocks = <&cmu CLK_PPMULCD0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_fsys: ppmu_fsys@12630000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12630000 0x2000>;
+			clocks = <&cmu CLK_PPMUFILE>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_g3d: ppmu_g3d@13220000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13220000 0x2000>;
+			clocks = <&cmu CLK_PPMUG3D>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_mfc: ppmu_mfc@13660000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13660000 0x2000>;
+			clocks = <&cmu CLK_PPMUMFC_L>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		bus_dmc: bus_dmc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu_dmc CLK_DIV_DMC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_dmc_opp_table>;
+			status = "disabled";
+		};
+
+		bus_dmc_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+
+		bus_leftbus: bus_leftbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_GDL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_rightbus: bus_rightbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_GDR>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_lcd0: bus_lcd0 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_160>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_200>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mcuisp: bus_mcuisp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_mcuisp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_isp: bus_isp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_266>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_isp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_peril: bus_peril {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_DIV_ACLK_100>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peril_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&cmu CLK_SCLK_MFC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_leftbus_opp_table: opp_table2 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <1000000>;
+			};
+		};
+
+		bus_mcuisp_opp_table: opp_table3 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+
+		bus_isp_opp_table: opp_table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+
+		bus_peril_opp_table: opp_table5 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+};
+
+#include "exynos3250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
new file mode 100644
index 000000000..27a1a8952
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for Exynos4 thermal zone
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		thermal-sensors = <&tmu>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			cpu_alert0: cpu-alert-0 {
+				temperature = <70000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert1: cpu-alert-1 {
+				temperature = <95000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_alert2: cpu-alert-2 {
+				temperature = <110000>; /* millicelsius */
+				hysteresis = <10000>; /* millicelsius */
+				type = "active";
+			};
+			cpu_crit0: cpu-crit-0 {
+				temperature = <120000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+		cooling-maps {
+			map0 {
+				trip = <&cpu_alert0>;
+			};
+			map1 {
+				trip = <&cpu_alert1>;
+			};
+		};
+	};
+};
+};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
new file mode 100644
index 000000000..41f0e64b1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -0,0 +1,1014 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/exynos4.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
+		csis0 = &csis_0;
+		csis1 = &csis_1;
+		fimc0 = &fimc_0;
+		fimc1 = &fimc_1;
+		fimc2 = &fimc_2;
+		fimc3 = &fimc_3;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		status = "disabled";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_audss: clock-controller@3810000 {
+			compatible = "samsung,exynos4210-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>,
+				 <&clock CLK_SCLK_AUDIO0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio",
+				      "sclk_pcm_in";
+		};
+
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0x03830000 0x100>;
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+				 <&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx", "tx-sec";
+			samsung,idma-addr = <0x03000000>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		scu: snoop-control-unit@10500000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x10500000 0x2000>;
+		};
+
+		memory-controller@12570000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12570000 0x14>;
+		};
+
+		mipi_phy: video-phy {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
+		};
+
+		pd_mfc: power-domain@10023c40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		pd_g3d: power-domain@10023c60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		pd_lcd0: power-domain@10023c80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+			#power-domain-cells = <0>;
+			label = "LCD0";
+		};
+
+		pd_tv: power-domain@10023c20 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C20 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_lcd0>;
+			label = "TV";
+		};
+
+		pd_cam: power-domain@10023c00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+			#power-domain-cells = <0>;
+			label = "CAM";
+		};
+
+		pd_gps: power-domain@10023ce0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CE0 0x20>;
+			#power-domain-cells = <0>;
+			label = "GPS";
+		};
+
+		pd_gps_alive: power-domain@10023d00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023D00 0x20>;
+			#power-domain-cells = <0>;
+			label = "GPS alive";
+		};
+
+		gic: interrupt-controller@10490000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
+		};
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10440000 0x1000>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos4-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos4210-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		dsi_0: dsi@11c80000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x11C80000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#clock-cells = <1>;
+			clock-output-names = "cam_a_clkout", "cam_b_clkout";
+			ranges;
+
+			fimc_0: fimc@11800000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11800000 0x1000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC0>,
+					 <&clock CLK_SCLK_FIMC0>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc0>;
+				status = "disabled";
+			};
+
+			fimc_1: fimc@11810000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11810000 0x1000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC1>,
+					 <&clock CLK_SCLK_FIMC1>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc1>;
+				status = "disabled";
+			};
+
+			fimc_2: fimc@11820000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11820000 0x1000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC2>,
+					 <&clock CLK_SCLK_FIMC2>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc2>;
+				status = "disabled";
+			};
+
+			fimc_3: fimc@11830000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11830000 0x1000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC3>,
+					 <&clock CLK_SCLK_FIMC3>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc3>;
+				status = "disabled";
+			};
+
+			csis_0: csis@11880000 {
+				compatible = "samsung,exynos4210-csis";
+				reg = <0x11880000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_CSIS0>,
+					 <&clock CLK_SCLK_CSIS0>;
+				clock-names = "csis", "sclk_csis";
+				bus-width = <4>;
+				power-domains = <&pd_cam>;
+				phys = <&mipi_phy 0>;
+				phy-names = "csis";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			csis_1: csis@11890000 {
+				compatible = "samsung,exynos4210-csis";
+				reg = <0x11890000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_CSIS1>,
+					 <&clock CLK_SCLK_CSIS1>;
+				clock-names = "csis", "sclk_csis";
+				bus-width = <2>;
+				power-domains = <&pd_cam>;
+				phys = <&mipi_phy 2>;
+				phy-names = "csis";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupt-parent = <&pmu_system_controller>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		keypad: keypad@100a0000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0x100A0000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
+
+		sdhci_0: sdhci@12510000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12510000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
+
+		sdhci_1: sdhci@12520000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12520000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
+
+		sdhci_2: sdhci@12530000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12530000 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
+
+		sdhci_3: sdhci@12540000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12540000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
+
+		exynos_usbphy: exynos-usbphy@125b0000 {
+			compatible = "samsung,exynos4210-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0x12480000 0x20000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_DEVICE>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		ehci: ehci@12580000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12580000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_HOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+			phy-names = "host", "hsic0", "hsic1";
+		};
+
+		ohci: ohci@12590000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12590000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_HOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			phys = <&exynos_usbphy 1>;
+			phy-names = "host";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "samsung,exynos4210-mali", "arm,mali-400";
+			reg = <0x13000000 0x10000>;
+			/*
+			 * CLK_G3D is not actually bus clock but a IP-level clock.
+			 * The bus clock is not described in hardware manual.
+			 */
+			clocks = <&clock CLK_G3D>,
+				 <&clock CLK_SCLK_G3D>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_g3d>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@13960000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13960000 0x100>;
+			clocks = <&clock CLK_I2S1>;
+			clock-names = "iis";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			dmas = <&pdma1 12>, <&pdma1 11>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			clocks = <&clock CLK_I2S2>;
+			clock-names = "iis";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0x13400000 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+			clock-names = "mfc", "sclk_mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma0 15>, <&pdma0 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma1 15>, <&pdma1 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma0 17>, <&pdma0 18>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		serial_3: serial@13830000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma1 17>, <&pdma1 18>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138a0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138c0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		i2c_8: i2c@138e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x138E0000 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+
+			hdmi_i2c_phy: hdmiphy@38 {
+				compatible = "samsung,exynos4210-hdmiphy";
+				reg = <0x38>;
+			};
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		spi_2: spi@13940000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13940000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			status = "disabled";
+		};
+
+		pwm: pwm@139d0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma1: mdma@12850000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12850000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		fimd: fimd@11c00000 {
+			compatible = "samsung,exynos4210-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x11c00000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <11 0>, <11 1>, <11 2>;
+			clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_fimd0>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		tmu: tmu@100c0000 {
+			interrupt-parent = <&combiner>;
+			reg = <0x100C0000 0x100>;
+			interrupts = <2 4>;
+			status = "disabled";
+			#thermal-sensor-cells = <0>;
+		};
+
+		jpeg_codec: jpeg-codec@11840000 {
+			compatible = "samsung,exynos4210-jpeg";
+			reg = <0x11840000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_JPEG>;
+			clock-names = "jpeg";
+			power-domains = <&pd_cam>;
+			iommus = <&sysmmu_jpeg>;
+		};
+
+		rotator: rotator@12810000 {
+			compatible = "samsung,exynos4210-rotator";
+			reg = <0x12810000 0x64>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
+
+		hdmi: hdmi@12d00000 {
+			compatible = "samsung,exynos4210-hdmi";
+			reg = <0x12D00000 0x70000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				      "sclk_hdmiphy", "mout_hdmi";
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>,
+				 <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			phy = <&hdmi_i2c_phy>;
+			power-domains = <&pd_tv>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmicec: cec@100b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x100B0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
+
+		mixer: mixer@12c10000 {
+			compatible = "samsung,exynos4210-mixer";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+			power-domains = <&pd_tv>;
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			clocks = <&clock CLK_PPMUDMC0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			clocks = <&clock CLK_PPMUDMC1>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			clocks = <&clock CLK_PPMUCPU>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&clock CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&clock CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_camif: ppmu_camif@11ac0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11ac0000 0x2000>;
+			clocks = <&clock CLK_PPMUCAMIF>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_lcd0: ppmu_lcd0@11e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11e40000 0x2000>;
+			clocks = <&clock CLK_PPMULCD0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_fsys: ppmu_g3d@12630000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12630000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_image: ppmu_image@12aa0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12aa0000 0x2000>;
+			clocks = <&clock CLK_PPMUIMAGE>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_tv: ppmu_tv@12e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12e40000 0x2000>;
+			clocks = <&clock CLK_PPMUTV>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_g3d: ppmu_g3d@13220000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13220000 0x2000>;
+			clocks = <&clock CLK_PPMUG3D>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_mfc_left: ppmu_mfc_left@13660000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13660000 0x2000>;
+			clocks = <&clock CLK_PPMUMFC_L>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_mfc_right: ppmu_mfc_right@13670000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13670000 0x2000>;
+			clocks = <&clock CLK_PPMUMFC_R>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		sysmmu_mfc_l: sysmmu@13620000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13620000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_r: sysmmu@13630000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13630000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_tv: sysmmu@12e20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12E20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			power-domains = <&pd_tv>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc0: sysmmu@11a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11A20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc1: sysmmu@11a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11A30000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 3>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc2: sysmmu@11a40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11A40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc3: sysmmu@11a50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11A50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg: sysmmu@11a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_rotator: sysmmu@12a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12A30000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>,
+				 <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd0: sysmmu@11e20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11E20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
+
+		prng: rng@10830400 {
+			compatible = "samsung,exynos4-rng";
+			reg = <0x10830400 0x200>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
+	};
+};
+
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000..d186b9314
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
+ * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy S2 (GT-I9100)";
+	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		ok {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_OK>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max17042_fuel: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+
+		battery@36 {
+			compatible = "maxim,max17042";
+
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-0 = <&max17042_fuel_irq>;
+			pinctrl-names = "default";
+
+			reg = <0x36>;
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+
+			spi-max-frequency = <1200000>;
+
+			vdd3-supply = <&vmipi_reg>;
+			vci-supply = <&vcclcd_reg>;
+
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+
+			panel-width-mm = <56>;
+			panel-height-mm = <93>;
+
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&camera {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+
+	port@3 {
+		reg = <3>;
+
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	mali-supply = <&vg3d_breg>;
+};
+
+&hsotg {
+	status = "okay";
+
+	dr_mode = "otg";
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+
+	mxt224-touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+		pinctrl-names = "default";
+
+		regulators {
+			vadc_reg: LDO1 {
+				regulator-name = "VADC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+			};
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vhsic_reg: LDO5 {
+				regulator-name = "VHSIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vtouch_reg: LDO11 {
+				regulator-name = "TOUCH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vmotor_reg: LDO14 {
+				regulator-name = "VCC_2.8V_MOTOR";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vled_reg: LDO15 {
+				regulator-name = "LED_A_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vtf_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vtouchled_reg: LDO18 {
+				regulator-name = "TOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vg3d_breg: BUCK3 {
+				regulator-name = "G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-microvolt-offset = <50000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <60000>;
+				regulator-max-microamp = <2580000>;
+				regulator-always-on;
+			};
+
+			chargercv_reg: CHARGER_CV {
+				regulator-name = "CHARGER_CV";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <4100000>;
+				regulator-always-on;
+			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
+
+			EN32KHZ_CP {
+				regulator-name = "EN32KHZ_CP";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_7 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		gpa0-0 {
+			samsung,pins = "gpa0-0";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-1 {
+			samsung,pins = "gpa0-1";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-2 {
+			samsung,pins = "gpa0-2";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-3 {
+			samsung,pins = "gpa0-3";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb_sel: usb-sel {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_en: bt-en {
+		samsung,pins = "gpl0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_res: bt-res {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	otg_gp: otg-gp {
+		samsung,pins = "gpx3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	mag_mhl_gpio: mag-mhl {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max17042_fuel_irq: max17042-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp224_irq: tsp224-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	status = "okay";
+
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vemmc_reg>;
+
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+	pinctrl-names = "default";
+};
+
+&sdhci_2 {
+	status = "okay";
+
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
new file mode 100644
index 000000000..7d2cfbafe
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial2:115200n8";
+	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		up {
+			label = "Up";
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			wakeup-source;
+		};
+
+		down {
+			label = "Down";
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck1_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>;
+		max8997,pmic-buck2-dvs-voltage = <1100000>;
+		max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VMIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_RTC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_AUD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt	= <3300000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "DVDD_SWB_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt	= <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_PLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_AUD_3V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt	= <3000000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "AVDD18_SWB_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_SWB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt	= <3300000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_MIF_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_ARM_1.2V";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt	= <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_INT_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_LCD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pinctrl_1 {
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&sdhci_0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000..520c5934a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -0,0 +1,863 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe4: gpe4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_a: uart-audio-a {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_b: uart-audio-b {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_sync: lcd-sync {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_en: lcd-en {
+		samsung,pins = "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+				"gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl1: gpl1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl2: gpl2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_clk: sd4-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cmd: sd4-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cd: sd4-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus1: sd4-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus4: sd4-bus-width4 {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus8: sd4-bus-width8 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpk3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpk3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gpx2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
new file mode 100644
index 000000000..c5609afa6
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Samsung's SMDKV310 board which is based on
+ * Samsung's Exynos4210 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	model = "Samsung smdkv310 evaluation board based on Exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial1:115200n8";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "samsung,24ad0xd1";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "samsung,24ad0xd1";
+		reg = <0x52>;
+	};
+};
+
+&keypad {
+	samsung,keypad-num-rows = <2>;
+	samsung,keypad-num-columns = <8>;
+	linux,keypad-no-autorepeat;
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <2>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <3>;
+	};
+
+	key_3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <4>;
+	};
+
+	key_4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <5>;
+	};
+
+	key_5 {
+		keypad,row = <0>;
+		keypad,column = <7>;
+		linux,code = <6>;
+	};
+
+	key_a {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <30>;
+	};
+
+	key_b {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <48>;
+	};
+
+	key_c {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <46>;
+	};
+
+	key_d {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <32>;
+	};
+
+	key_e {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <18>;
+	};
+};
+
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&spi_2 {
+	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	w25x80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25x80";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0xc0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
new file mode 100644
index 000000000..a226bec56
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats board which is based on
+ * Samsung's Exynos4210 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down-key {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up-key {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&camera {
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e8aa0";
+		vdd3-supply = <&vcclcd_reg>;
+		vci-supply = <&vlcd_reg>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			  <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			  <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			  <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+		assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			  <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mms114-touchscreen@48 {
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&tsp_reg>;
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+
+		reg = <0x66>;
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.3V_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vlcd_reg: LDO15 {
+				regulator-name = "VLCD_2.2V";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			tflash_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V_C210";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
+
+			EN32KHZ_CP {
+				regulator-name = "EN32KHZ_CP";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&tflash_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&tflash_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
new file mode 100644
index 000000000..08284e8f3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Universal C210 board which is based on
+ * Samsung's Exynos4210 rev0 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+		stdout-path = "serial2:115200n8";
+	};
+
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	vemmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-up-key {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <1>;
+		};
+
+		vol-down-key {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <1>;
+		};
+
+		config-key {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <171>;
+			label = "config";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+		camera-key {
+			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <212>;
+			label = "camera";
+			debounce-interval = <1>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <1>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			spi-max-frequency = <1200000>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi_en: voltage-regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi_ddc: i2c-ddc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_ddc_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&camera {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safeout1_reg>;
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			  <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			  <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			  <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			  <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	samsung,invert-vden;
+	samsung,invert-vclk;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@3 {
+		reg = <3>;
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&buck2_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	hdmi-en-supply = <&hdmi_en>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&hdmi_ddc>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tsp@4a {
+		/* TBD: Atmel maXtouch touchscreen */
+		reg = <0x4a>;
+	};
+};
+
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_arm_reg: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "VARM_1.2V_C210";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pmic@66 {
+		compatible = "national,lp3974";
+		interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp3974_irq>;
+		reg = <0x66>;
+
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						<&gpx0 6 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+						<1100000>, <1000000>;
+
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&mct {
+	compatible = "none";
+};
+
+&mdma1 {
+	/* Use the secure mdma0 */
+	status = "disabled";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pinctrl_1 {
+	lp3974_irq: lp3974-irq {
+		samsung,pins = "gpx0-7", "gpx2-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_0 {
+	i2c_ddc_bus: i2c-ddc-bus {
+		samsung,pins = "gpe4-2", "gpe4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	compatible = "samsung,s5p6440-pwm";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo5_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_2 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_3 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&soc {
+	mdma0: mdma@12840000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12840000 0x1000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock CLK_MDMA>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <1>;
+		power-domains = <&pd_lcd0>;
+	};
+};
+
+&sysram {
+	smp-sram@0 {
+		status = "disabled";
+	};
+
+	smp-sram@5000 {
+		compatible = "samsung,exynos4210-sysram";
+		reg = <0x5000 0x1000>;
+	};
+
+	smp-sram@1f000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
new file mode 100644
index 000000000..448e1b153
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specific
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
+
+/ {
+	compatible = "samsung,exynos4210", "samsung,exynos4";
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@900 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x900>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@901 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x901>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	soc: soc {
+		sysram: sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x20000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@1f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x1f000 0x1000>;
+			};
+		};
+
+		pd_lcd1: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
+			label = "LCD1";
+		};
+
+		l2c: cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <2 2 1>;
+		};
+
+		mct: timer@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@10060000 {
+			compatible = "samsung,s3c6410-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+		};
+
+		clock: clock-controller@10030000 {
+			compatible = "samsung,exynos4210-clock";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_2: pinctrl@3860000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x03860000 0x1000>;
+		};
+
+		g2d: g2d@12800000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0x12800000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_g2d>;
+		};
+
+		ppmu_acp: ppmu_acp@10ae0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10ae0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_lcd1: ppmu_lcd1@12240000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12240000 0x2000>;
+			clocks = <&clock CLK_PPMULCD1>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		sysmmu_g2d: sysmmu@12a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12A20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 7>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1: sysmmu@12220000 {
+			compatible = "samsung,exynos-sysmmu";
+			interrupt-parent = <&combiner>;
+			reg = <0x12220000 0x1000>;
+			interrupts = <5 3>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			power-domains = <&pd_lcd1>;
+			#iommu-cells = <0>;
+		};
+
+		bus_dmc: bus_dmc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_DMC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_dmc_opp_table>;
+			status = "disabled";
+		};
+
+		bus_acp: bus_acp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_ACP>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_acp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_peri: bus_peri {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK100>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peri_opp_table>;
+			status = "disabled";
+		};
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK133>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_opp_table>;
+			status = "disabled";
+		};
+
+		bus_display: bus_display {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK160>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_display_opp_table>;
+			status = "disabled";
+		};
+
+		bus_lcd0: bus_lcd0 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK200>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_leftbus: bus_leftbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_GDL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_rightbus: bus_rightbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_GDR>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_SCLK_MFC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_dmc_opp_table: opp_table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+
+		bus_acp_opp_table: opp_table2 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+
+		bus_peri_opp_table: opp_table3 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+
+		bus_fsys_opp_table: opp_table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+
+		bus_display_opp_table: opp_table5 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+
+		bus_leftbus_opp_table: opp_table6 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-suspend;
+			};
+		};
+	};
+};
+
+&cpu_alert0 {
+	temperature = <85000>; /* millicelsius */
+};
+
+&cpu_alert1 {
+	temperature = <100000>; /* millicelsius */
+};
+
+&cpu_alert2 {
+	temperature = <110000>; /* millicelsius */
+};
+
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+};
+
+&gic {
+	cpu-offset = <0x8000>;
+};
+
+&camera {
+	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+};
+
+&combiner {
+	samsung,combiner-nr = <16>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fimc_0 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,lcd-wb;
+};
+
+&fimc_3 {
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,lcd-wb;
+};
+
+&gpu {
+	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3";
+	operating-points-v2 = <&gpu_opp_table>;
+
+	gpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+};
+
+&mdma1 {
+	power-domains = <&pd_lcd0>;
+};
+
+&mixer {
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+		      "sclk_mixer";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+		 <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
+};
+
+&rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&sysmmu_rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4210-tmu";
+	clocks = <&clock CLK_TMU_APBIF>;
+	clock-names = "tmu_apbif";
+	samsung,tmu_gain = <15>;
+	samsung,tmu_reference_voltage = <7>;
+};
+
+#include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
new file mode 100644
index 000000000..89ed81fb3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based Galaxy S3 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412-midas.dtsi"
+
+/ {
+	aliases {
+		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
+	};
+
+	aat1290 {
+		compatible = "skyworks,aat1290";
+		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "host", "isp";
+		pinctrl-0 = <&camera_flash_host>;
+		pinctrl-1 = <&camera_flash_host>;
+		pinctrl-2 = <&camera_flash_isp>;
+
+		flash-led {
+			label = "flash";
+			led-max-microamp = <520833>;
+			flash-max-microamp = <1012500>;
+			flash-max-timeout-us = <1940000>;
+		};
+	};
+
+	lcd_vdd3_reg: voltage-regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_VDD_2.2V";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <2200000>;
+		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ps_als_reg: voltage-regulator-11 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_A_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	i2c_ak8975: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ak8975@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+};
+
+&buck9_reg {
+	maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+};
+
+&cam_af_reg {
+	gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cam_io_reg {
+	gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&dsi_0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e8aa0";
+		reg = <0>;
+		vdd3-supply = <&lcd_vdd3_reg>;
+		vci-supply = <&ldo25_reg>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	mms114-touchscreen@48 {
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&ldo23_reg>;
+		vdd-supply = <&ldo24_reg>;
+	};
+};
+
+&ldo25_reg {
+	regulator-name = "LCD_VCC_3.3V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&pinctrl_0 {
+	camera_flash_host: camera-flash-host {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-val = <0>;
+	};
+
+	camera_flash_isp: camera-flash-isp {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-val = <1>;
+	};
+};
+
+&s5c73m3 {
+	standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+	vdda-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+		"SPK", "SPKOUTRN",
+		"SPK", "SPKOUTRP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS1",
+		"IN1LN", "MICBIAS1",
+		"Main Mic", "MICBIAS1",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
+&touchkey_reg {
+	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
new file mode 100644
index 000000000..07fbcf845
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-i9300.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412-galaxy-s3.dtsi"
+
+/ {
+	model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
+	compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+
+	/* bootargs are passed in by bootloader */
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+};
+
+&sound {
+	fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts
new file mode 100644
index 000000000..6bc3d897f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-i9305.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "exynos4412-galaxy-s3.dtsi"
+
+/ {
+	model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
+	compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+
+	/* bootargs are passed in by bootloader */
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+};
+
+&i2c0_bus {
+	/* SCL and SDA pins are swapped */
+	samsung,pins = "gpd1-1", "gpd1-0";
+};
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
new file mode 100644
index 000000000..9a2a49420
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 core board
+ * which is based on Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos4412-itop-scp-core.dtsi"
+
+/ {
+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "red:system";
+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led3 {
+			label = "red:user";
+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "GPIO Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		back {
+			label = "GPIO Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		sleep {
+			label = "GPIO Key Sleep";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-up {
+			label = "GPIO Key Vol+";
+			linux,code = <KEY_UP>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-down {
+			label = "GPIO Key Vol-";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm-sound";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
+	beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-rates = <0>, <0>, <112896000>, <11289600>;
+};
+
+&ehci {
+	status = "okay";
+	/* In order to reset USB ethernet */
+	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+
+	phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>;
+	phy-names = "host", "hsic1";
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl_1 {
+	ether-reset {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo23_reg>;
+	vqmmc-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
new file mode 100644
index 000000000..dfceb155b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 SCP package core
+ * board which is based on Samsung's Exynos4412 SoC.
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	firmware@203f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+						      <&cpu2 7 7>, <&cpu3 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>,
+						      <&cpu1 13 13>,
+						      <&cpu2 13 13>,
+						      <&cpu3 13 13>;
+			       };
+		       };
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
+		intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
+						 <&gpb 6 GPIO_ACTIVE_HIGH>,
+						 <&gpb 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		/* VDD_ARM */
+		s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
+						 <1243750>, <1118750>,
+						 <1068750>, <1012500>,
+						 <956250>, <900000>;
+		/* VDD_INT */
+		s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
+						 <925000>, <925000>,
+						 <887500>, <887500>,
+						 <850000>, <850000>;
+		/* VDD_G3D */
+		s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
+						 <1025000>, <950000>,
+						 <918750>, <900000>,
+						 <875000>, <831250>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* SCP uses 1.5v, POP uses 1.2v */
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_LDO5";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* Used by HSIC */
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_LDO19";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1456250>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_m12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd12_5m";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "pvdd_buck7";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "pvdd_buck8";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vddf28_emmc";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap",
+					"s5m8767_cp", "s5m8767_bt";
+		};
+
+	};
+};
+
+&mfc {
+	status = "okay";
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	vmmc-supply = <&buck9_reg>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpm2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu {
+	vtmu-supply = <&ldo16_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
new file mode 100644
index 000000000..255a13666
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -0,0 +1,1423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/pinctrl/samsung.h>
+
+/ {
+	compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+
+	aliases {
+		i2c11 = &i2c_max77693;
+		i2c12 = &i2c_max77693_fuel;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	cam_io_reg: voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_SENSOR_A";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	cam_af_reg: voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_AF";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	vsil12: voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSIL_1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&buck7_reg>;
+	};
+
+	vcc33mhl: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3.3_MHL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc18mhl: voltage-regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1.8_MHL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	touchkey_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VDD_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	vbatt_reg: voltage-regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBATT";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	mic_bias_reg: voltage-regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	submic_bias_reg: voltage-regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "SUB_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-down {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-ok {
+			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <139>;
+			label = "ok";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	i2c_max77693: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693@66 {
+			compatible = "maxim,max77693";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_irq>;
+			reg = <0x66>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1 {
+					regulator-name = "ESAFEOUT1";
+				};
+				esafeout2_reg: ESAFEOUT2 {
+					regulator-name = "ESAFEOUT2";
+				};
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+				};
+			};
+
+			max77693_haptic {
+				compatible = "maxim,max77693-haptic";
+				haptic-supply = <&ldo26_reg>;
+				pwms = <&pwm 0 38022 0>;
+			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693-fuel-gauge@36 {
+			compatible = "maxim,max17047";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_fuel_irq>;
+			reg = <0x36>;
+
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_reg>;
+			vcc-supply = <&ldo5_reg>;
+			interrupt-parent = <&gpj0>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			linux,keycodes = <KEY_BACK KEY_MENU>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_mhl_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		sii9234: hdmi-bridge@39 {
+			compatible = "sil,sii9234";
+			avcc33-supply = <&vcc33mhl>;
+			iovcc18-supply = <&vcc18mhl>;
+			avcc12-supply = <&vsil12>;
+			cvcc12-supply = <&vsil12>;
+			reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpf3>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x39>;
+
+			port {
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+
+	sound: sound {
+		compatible = "samsung,midas-audio";
+		model = "Midas";
+		mic-bias-supply = <&mic_bias_reg>;
+		submic-bias-supply = <&submic_bias_reg>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+		codec {
+			sound-dai = <&wm1811>;
+		};
+	};
+
+	thermistor-ap {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 1>;  /* AP temperature */
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 2>;  /* Battery temperature */
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>,
+		<&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&csis_0 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+			<&clock CLK_SCLK_CSIS0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera C (3) MIPI CSI-2 (CSIS0) */
+	port@3 {
+		reg = <3>;
+		csis0_ep: endpoint {
+			remote-endpoint = <&s5c73m3_ep>;
+			data-lanes = <1 2 3 4>;
+			samsung,csis-hs-settle = <12>;
+		};
+	};
+};
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+			<&clock CLK_SCLK_CSIS1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera D (4) MIPI CSI-2 (CSIS1) */
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&is_s5k6a3_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <18>;
+			samsung,csis-wclk;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+};
+
+&exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			<&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			<&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			<&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_is {
+	pinctrl-0 = <&fimc_is_uart>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	};
+
+&fimc_lite_0 {
+	status = "okay";
+};
+
+&fimc_lite_1 {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&i2c_5>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			hdmi_to_mhl: endpoint {
+				remote-endpoint = <&mhl_to_hdmi>;
+			};
+		};
+	};
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5c73m3: s5c73m3@3c {
+		compatible = "samsung,s5c73m3";
+		reg = <0x3c>;
+		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+		vdd-int-supply = <&buck9_reg>;
+		vddio-cis-supply = <&ldo9_reg>;
+		vddio-host-supply = <&ldo18_reg>;
+		vdd-af-supply = <&cam_af_reg>;
+		vdd-reg-supply = <&cam_io_reg>;
+		clock-frequency = <24000000>;
+		/* CAM_A_CLKOUT */
+		clocks = <&camera 0>;
+		clock-names = "cis_extclk";
+		status = "disabled";
+		port {
+			s5c73m3_ep: endpoint {
+				remote-endpoint = <&csis0_ep>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&i2c1_isp {
+	pinctrl-0 = <&fimc_is_i2c1>;
+	pinctrl-names = "default";
+
+	s5k6a3@10 {
+		compatible = "samsung,s5k6a3";
+		reg = <0x10>;
+		svdda-supply = <&cam_io_reg>;
+		svddio-supply = <&ldo19_reg>;
+		afvdd-supply = <&ldo19_reg>;
+		clock-frequency = <24000000>;
+		/* CAM_B_CLKOUT */
+		clocks = <&camera 1>;
+		clock-names = "extclk";
+		samsung,camclk-out = <1>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			is_s5k6a3_ep: endpoint {
+				remote-endpoint = <&csis1_ep>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm1811: wm1811@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>,
+			<&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "MCLK1", "MCLK2";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		#sound-dai-cells = <0>;
+
+		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+			0x0 0x8000 0x0 0x0 0x0>;
+		wlf,micbias-cfg = <0x2f 0x2b>;
+
+		wlf,lineout1-feedback;
+		wlf,lineout1-se;
+		wlf,lineout2-se;
+		wlf,ldoena-always-driven;
+
+		AVDD2-supply = <&vbatt_reg>;
+		DBVDD1-supply = <&ldo3_reg>;
+		DBVDD2-supply = <&vbatt_reg>;
+		DBVDD3-supply = <&vbatt_reg>;
+		DCVDD-supply = <&ldo3_reg>;
+		CPVDD-supply = <&vbatt_reg>;
+		SPKVDD1-supply = <&vbatt_reg>;
+		SPKVDD2-supply = <&vbatt_reg>;
+		wlf,ldo1ena = <&gpj0 4 0>;
+		wlf,ldo2ena = <&gpj0 4 0>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max77686: max77686_pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&max77686_irq>;
+		pinctrl-names = "default";
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VMPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "CAM_ISP_MIPI_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VABB1_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "NFC_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VABB2_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VHSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "CAM_SENSOR_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_ISP_SEN_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDDQ_PRE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VMEM_VDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "LDO25";
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "MOTOR_VCC_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VMEM_VDDF_3.0V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo22_reg>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep0: sleep-states {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, UP);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, NONE);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, NONE);
+		PIN_SLP(gpc1-3, INPUT, NONE);
+		PIN_SLP(gpc1-4, INPUT, NONE);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, NONE);
+		PIN_SLP(gpf0-1, INPUT, NONE);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, INPUT, NONE);
+		PIN_SLP(gpf0-5, INPUT, DOWN);
+		PIN_SLP(gpf0-6, INPUT, NONE);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, NONE);
+		PIN_SLP(gpf1-5, INPUT, NONE);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, PREV, NONE);
+
+		PIN_SLP(gpf2-0, PREV, NONE);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, NONE);
+		PIN_SLP(gpf2-7, INPUT, NONE);
+
+		PIN_SLP(gpf3-0, INPUT, NONE);
+		PIN_SLP(gpf3-1, PREV, NONE);
+		PIN_SLP(gpf3-2, PREV, NONE);
+		PIN_SLP(gpf3-3, PREV, NONE);
+		PIN_SLP(gpf3-4, OUT1, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, PREV, NONE);
+		PIN_SLP(gpj0-1, PREV, NONE);
+		PIN_SLP(gpj0-2, PREV, NONE);
+		PIN_SLP(gpj0-3, INPUT, DOWN);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, PREV, NONE);
+		PIN_SLP(gpj0-6, INPUT, DOWN);
+		PIN_SLP(gpj0-7, INPUT, DOWN);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, PREV, NONE);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_irq: max77693-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_fuel_irq: max77693-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sdhci2_cd: sdhci2-cd-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	sleep1: sleep-states {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, INPUT, DOWN);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, DOWN);
+		PIN_SLP(gpy0-3, INPUT, DOWN);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-states {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-states {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	s5c73m3_spi: s5c73m3@0 {
+		compatible = "samsung,s5c73m3";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		controller-data {
+			samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
new file mode 100644
index 000000000..a47b7f35f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "exynos4412-midas.dtsi"
+
+/ {
+	compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	/* bootargs are passed in by bootloader */
+
+	cam_vdda_reg: voltage-regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_SENSOR_CORE_1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&buck9_reg {
+	maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>;
+};
+
+&cam_af_reg {
+	gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cam_io_reg {
+	gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mms152-touchscreen@48 {
+		compatible = "melfas,mms152";
+		reg = <0x48>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		x-size = <720>;
+		y-size = <1280>;
+		avdd-supply = <&ldo23_reg>;
+		vdd-supply = <&ldo24_reg>;
+	};
+};
+
+&ldo13_reg {
+	regulator-name = "VCC_1.8V_LCD";
+	regulator-always-on;
+};
+
+&ldo25_reg {
+	regulator-name = "VCI_3.0V_LCD";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&s5c73m3 {
+	standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+	vdda-supply = <&cam_vdda_reg>;
+	status = "okay";
+};
+
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS2",
+		"IN1LN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "Main Mic",
+		"IN2LN", "Main Mic",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	regulator-always-on;
+};
+
+&touchkey_reg {
+	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
new file mode 100644
index 000000000..869d80be1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
+ * device tree source
+*/
+
+#include <dt-bindings/sound/samsung-i2s.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_power_key>;
+
+		power_key {
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	sound: sound {
+		compatible = "hardkernel,odroid-xu4-audio";
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&hdmi>, <&max98090>;
+		};
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_rstn>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&camera {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <45158401>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			<&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			  <&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates = <0>, <0>,
+			<196608001>,
+			<(196608001 / 2)>,
+			<(196608001 / 8)>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu0_opp_table {
+	opp-1000000000 {
+		opp-suspend;
+	};
+	opp-800000000 {
+		/delete-property/opp-suspend;
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	gpio_power_key: power_key {
+		samsung,pins = "gpx1-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			<&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			<&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			<&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
+&hdmicec {
+	status = "okay";
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
+
+&i2c_0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	usb3503: usb3503@8 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	max77686: pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M1_2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDQ_EXT_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_MMC2_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDDQ_MMC1_3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_HDMI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_MIPIHSI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_USB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDQ_C2C_W_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB0_2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_HSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "TFLASH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo22_reg: LDO22 {
+				/*
+				 * Only U3 uses it, so let it define the
+				 * constraints
+				 */
+				regulator-name = "LDO22";
+				regulator-boot-on;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDDQ_LCD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-microvolt-offset = <50000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDDQ_CKEM1_2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "BUCK7_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				/*
+				 * Constraints set by specific board: X,
+				 * X2 and U3.
+				 */
+				regulator-name = "BUCK8_2.8V";
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_NONE>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo20_reg>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	status = "okay";
+
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
new file mode 100644
index 000000000..b8549d846
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
+ *
+ * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-U3 board which is based
+ * on Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+#include "exynos4412-prime.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-U3 board based on Exynos4412";
+	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 10000 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 102 170 230>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	/* Nothing connected to ADC inputs, keep it disabled */
+};
+
+/* Supply for LAN9730/SMSC95xx */
+&buck8_reg {
+	regulator-name = "BUCK8_P3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+					 <&cpu2 9 9>, <&cpu3 9 9>,
+					 <&fan0 1 2>;
+		};
+		map1 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
+					 <&cpu2 15 15>, <&cpu3 15 15>,
+					 <&fan0 2 3>;
+		};
+		map2 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+	};
+};
+
+&hdmicec {
+	needs-hpd;
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&ldo22_reg {
+	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&ldo22_reg>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
+};
+
+&usb3503 {
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	refclk-frequency = <24000000>;
+};
+
+&ehci {
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
+};
+
+&sound {
+	model = "Odroid-U3";
+	samsung,audio-widgets =
+		"Headphone", "Headphone Jack",
+		"Speakers", "Speakers";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"Headphone Jack", "MICBIAS",
+		"IN1", "Headphone Jack",
+		"Speakers", "SPKL",
+		"Speakers", "SPKR";
+};
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 000000000..3ea2a0101
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based
+ * on Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x3FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys {
+		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+		home_key {
+			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_HOME>;
+			label = "home key";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&ehci {
+	phys = <&exynos_usbphy 2>;
+	phy-names = "hsic0";
+};
+
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
+&pinctrl_1 {
+	gpio_home_key: home_key {
+		samsung,pins = "gpx2-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&sound {
+	model = "Odroid-X";
+	samsung,audio-widgets =
+		"Headphone", "Headphone Jack",
+		"Microphone", "Mic Jack",
+		"Microphone", "DMIC";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
new file mode 100644
index 000000000..f4b68c75c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X2 board which is based
+ * on Samsung's Exynos4412 SoC.
+ */
+
+#include "exynos4412-odroidx.dts"
+#include "exynos4412-prime.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X2 board based on Exynos4412";
+	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7FF00000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
new file mode 100644
index 000000000..e2d76ea44
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	firmware@203f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	mmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap", "s5m8767_cp",
+					     "s5m8767_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD18_2M";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "DVDD25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_M12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD12_5M";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDDF28_EMMC";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+	};
+};
+
+&keypad {
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <2>;
+	linux,keypad-no-autorepeat;
+	wakeup-source;
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	key_home {
+		keypad,row = <0>;
+		keypad,column = <0>;
+		linux,code = <KEY_HOME>;
+	};
+
+	key_down {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_DOWN>;
+	};
+
+	key_up {
+		keypad,row = <1>;
+		keypad,column = <0>;
+		linux,code = <KEY_UP>;
+	};
+
+	key_menu {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_MENU>;
+	};
+
+	key_back {
+		keypad,row = <2>;
+		keypad,column = <0>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_enter {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_ENTER>;
+	};
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
new file mode 100644
index 000000000..d7d5fdc23
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_a: uart-audio-a {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_b: uart-audio-b {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi1_clk: mipi1-clk {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+				"gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ldi: lcd-ldi {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl1: gpl1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl2: gpl2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_clk: sd4-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cmd: sd4-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cd: sd4-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus1: sd4-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus4: sd4-bus-width4 {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus8: sd4-bus-width8 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpk3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpk3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gpx2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_bus: c2c-bus {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+				"gpv4-0", "gpv4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
new file mode 100644
index 000000000..3a3b2fafe
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for Exynos4412 PPMU common device tree
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+&ppmu_dmc0 {
+       status = "okay";
+
+       events {
+	       ppmu_dmc0_3: ppmu-event3-dmc0 {
+		       event-name = "ppmu-event3-dmc0";
+	       };
+       };
+};
+
+&ppmu_dmc1 {
+       status = "okay";
+
+       events {
+	       ppmu_dmc1_3: ppmu-event3-dmc1 {
+		       event-name = "ppmu-event3-dmc1";
+	       };
+       };
+};
+
+&ppmu_leftbus {
+       status = "okay";
+
+       events {
+	       ppmu_leftbus_3: ppmu-event3-leftbus {
+		       event-name = "ppmu-event3-leftbus";
+	       };
+       };
+};
+
+&ppmu_rightbus {
+       status = "okay";
+
+       events {
+	       ppmu_rightbus_3: ppmu-event3-rightbus {
+		       event-name = "ppmu-event3-rightbus";
+	       };
+       };
+};
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
new file mode 100644
index 000000000..3731a225f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-prime.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 Prime SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/*
+ * Exynos4412 Prime SoC revision supports higher CPU frequencies than
+ * non-Prime version.  Therefore we need to update OPPs table and
+ * thermal maps accordingly.
+ */
+
+&cpu0_opp_1500 {
+	/delete-property/turbo-mode;
+};
+
+&cpu0_opp_table {
+	opp-1600000000 {
+		opp-hz = /bits/ 64 <1600000000>;
+		opp-microvolt = <1350000>;
+		clock-latency-ns = <200000>;
+	};
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+		clock-latency-ns = <200000>;
+	};
+};
+
+&cooling_map0 {
+	cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+			 <&cpu2 9 9>, <&cpu3 9 9>;
+};
+
+&cooling_map1 {
+	cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
+			 <&cpu2 15 15>, <&cpu3 15 15>;
+};
+
+&gpu_opp_table {
+	opp-533000000 {
+		opp-hz = /bits/ 64 <533000000>;
+		opp-microvolt = <1075000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
new file mode 100644
index 000000000..49971203a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	model = "Samsung SMDK evaluation board based on Exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial1:115200n8";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&keypad {
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <8>;
+	linux,keypad-no-autorepeat;
+	wakeup-source;
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	key_1 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <2>;
+	};
+
+	key_2 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <3>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <4>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <5>;
+	};
+
+	key_5 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <6>;
+	};
+
+	key_A {
+		keypad,row = <2>;
+		keypad,column = <6>;
+		linux,code = <30>;
+	};
+
+	key_B {
+		keypad,row = <2>;
+		keypad,column = <7>;
+		linux,code = <48>;
+	};
+
+	key_C {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <46>;
+	};
+
+	key_D {
+		keypad,row = <2>;
+		keypad,column = <5>;
+		linux,code = <32>;
+	};
+
+	key_E {
+		keypad,row = <0>;
+		keypad,column = <7>;
+		linux,code = <18>;
+	};
+};
+
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
new file mode 100644
index 000000000..017b26108
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM TINY4412 board based on Exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@3 {
+		reg = <3>;
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
new file mode 100644
index 000000000..7b447b630
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412-galaxy-s3.dtsi"
+
+/ {
+	model = "Samsung Trats 2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
new file mode 100644
index 000000000..e76881dc0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "exynos4.dtsi"
+
+#include "exynos4-cpu-thermal.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412", "samsung,exynos4";
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
+		mshc0 = &mshc_0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@a00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@a01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@a02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA02>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@a03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA03>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp-table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		cpu0_opp_1500: opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
+		};
+	};
+
+
+	soc: soc {
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_2: pinctrl@3860000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 0>;
+		};
+
+		pinctrl_3: pinctrl@106e0000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x106E0000 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
+		};
+
+		pd_isp: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
+
+		l2c: cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <3 2 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <1>;
+			arm,prefetch-offset = <7>;
+		};
+
+		clock: clock-controller@10030000 {
+			compatible = "samsung,exynos4412-clock";
+			reg = <0x10030000 0x18000>;
+			#clock-cells = <1>;
+		};
+
+		isp_clock: clock-controller@10048000 {
+			compatible = "samsung,exynos4412-isp-clock";
+			reg = <0x10048000 0x1000>;
+			#clock-cells = <1>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>;
+			clock-names = "aclk200", "aclk400_mcuisp";
+		};
+
+		timer@10050000 {
+			compatible = "samsung,exynos4412-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 5>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@10060000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
+
+		adc: adc@126c0000 {
+			compatible = "samsung,exynos4212-adc";
+			reg = <0x126C0000 0x100>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 3>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		g2d: g2d@10800000 {
+			compatible = "samsung,exynos4212-g2d";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
+
+		mshc_0: mmc@12550000 {
+			compatible = "samsung,exynos4412-dw-mshc";
+			reg = <0x12550000 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			fifo-depth = <0x80>;
+			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysmmu_g2d: sysmmu@10a40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 7>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_isp: sysmmu@12260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 2>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_drc: sysmmu@12270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 3>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_fd: sysmmu@122a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122A0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 4>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 5>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite0: sysmmu@123b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 0>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
+				 <&isp_clock CLK_ISP_FIMC_LITE0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite1: sysmmu@123c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 1>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
+				 <&isp_clock CLK_ISP_FIMC_LITE1>;
+			#iommu-cells = <0>;
+		};
+
+		bus_dmc: bus_dmc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_DMC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_dmc_opp_table>;
+			status = "disabled";
+		};
+
+		bus_acp: bus_acp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_ACP>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_acp_opp_table>;
+			status = "disabled";
+		};
+
+		bus_c2c: bus_c2c {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_C2C>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_dmc_opp_table>;
+			status = "disabled";
+		};
+
+		bus_dmc_opp_table: opp-table1 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <950000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1050000>;
+				opp-suspend;
+			};
+		};
+
+		bus_acp_opp_table: opp-table2 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+
+		bus_leftbus: bus_leftbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_GDL>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_rightbus: bus_rightbus {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DIV_GDR>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_display: bus_display {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK160>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_display_opp_table>;
+			status = "disabled";
+		};
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK133>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_fsys_opp_table>;
+			status = "disabled";
+		};
+
+		bus_peri: bus_peri {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_ACLK100>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_peri_opp_table>;
+			status = "disabled";
+		};
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_SCLK_MFC>;
+			clock-names = "bus";
+			operating-points-v2 = <&bus_leftbus_opp_table>;
+			status = "disabled";
+		};
+
+		bus_leftbus_opp_table: opp-table3 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <900000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <925000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+				opp-microvolt = <950000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <1000000>;
+				opp-suspend;
+			};
+		};
+
+		bus_display_opp_table: opp-table4 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+
+		bus_fsys_opp_table: opp-table5 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+
+		bus_peri_opp_table: opp-table6 {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+};
+
+&combiner {
+	samsung,combiner-nr = <20>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&camera {
+	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+	/* fimc_[0-3] are configured outside, under phandles */
+	fimc_lite_0: fimc-lite@12390000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x12390000 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite0>;
+		status = "disabled";
+	};
+
+	fimc_lite_1: fimc-lite@123a0000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x123A0000 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite1>;
+		status = "disabled";
+	};
+
+	fimc_is: fimc-is@12000000 {
+		compatible = "samsung,exynos4212-fimc-is";
+		reg = <0x12000000 0x260000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+			 <&isp_clock CLK_ISP_FIMC_LITE1>,
+			 <&isp_clock CLK_ISP_PPMUISPX>,
+			 <&isp_clock CLK_ISP_PPMUISPMX>,
+			 <&isp_clock CLK_ISP_FIMC_ISP>,
+			 <&isp_clock CLK_ISP_FIMC_DRC>,
+			 <&isp_clock CLK_ISP_FIMC_FD>,
+			 <&isp_clock CLK_ISP_MCUISP>,
+			 <&isp_clock CLK_ISP_GICISP>,
+			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+			 <&isp_clock CLK_ISP_PWM_ISP>,
+			 <&isp_clock CLK_ISP_DIV_ISP0>,
+			 <&isp_clock CLK_ISP_DIV_ISP1>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+			 <&clock CLK_MOUT_MPLL_USER_T>,
+			 <&clock CLK_ACLK200>,
+			 <&clock CLK_ACLK400_MCUISP>,
+			 <&clock CLK_DIV_ACLK200>,
+			 <&clock CLK_DIV_ACLK400_MCUISP>,
+			 <&clock CLK_UART_ISP_SCLK>;
+		clock-names = "lite0", "lite1", "ppmuispx",
+			      "ppmuispmx", "isp",
+			      "drc", "fd", "mcuisp",
+			      "gicisp", "mcuctl_isp", "pwm_isp",
+			      "ispdiv0", "ispdiv1", "mcuispdiv0",
+			      "mcuispdiv1", "mpll", "aclk200",
+			      "aclk400mcuisp", "div_aclk200",
+			      "div_aclk400mcuisp", "uart";
+		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+		iommu-names = "isp", "drc", "fd", "mcuctl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		pmu@10020000 {
+			reg = <0x10020000 0x3000>;
+		};
+
+		i2c1_isp: i2c-isp@12140000 {
+			compatible = "samsung,exynos4212-i2c-isp";
+			reg = <0x12140000 0x100>;
+			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+			clock-names = "i2c_isp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	compatible = "samsung,exynos4x12-usb2-phy";
+	samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+	samsung,cam-if;
+};
+
+&fimc_3 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+};
+
+&gic {
+	cpu-offset = <0x4000>;
+};
+
+&gpu {
+	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3",
+			  "pmu";
+	operating-points-v2 = <&gpu_opp_table>;
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+};
+
+&hdmi {
+	compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+	compatible = "samsung,exynos4212-jpeg";
+};
+
+&rotator {
+	compatible = "samsung,exynos4212-rotator";
+};
+
+&mixer {
+	compatible = "samsung,exynos4212-mixer";
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4412-pmu", "syscon";
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4412-tmu";
+	interrupt-parent = <&combiner>;
+	interrupts = <2 4>;
+	reg = <0x100C0000 0x100>;
+	clocks = <&clock 383>;
+	clock-names = "tmu_apbif";
+	status = "disabled";
+};
+
+#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
new file mode 100644
index 000000000..9ce9fb3fc
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5 SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos5 series can include this file and provide values for SoCs
+ * specfic bindings.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sromc: memory-controller@12250000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12250000 0x14>;
+		};
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x2000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		sysreg_system_controller: syscon@10050000 {
+			compatible = "samsung,exynos5-sysreg", "syscon";
+			reg = <0x10050000 0x5000>;
+		};
+
+		serial_0: serial@12c00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_1: serial@12c10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_2: serial@12c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_3: serial@12c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C30000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c_0: i2c@12c60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C60000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@12c70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C70000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@12c80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C80000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@12c90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12C90000 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		pwm: pwm@12dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x12DD0000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+		};
+
+		rtc: rtc@101e0000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x101E0000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		fimd: fimd@14400000 {
+			compatible = "samsung,exynos5250-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x14400000 0x40000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <18 4>, <18 5>, <18 6>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dp: dp-controller@145b0000 {
+			compatible = "samsung,exynos5-dp";
+			reg = <0x145B0000 0x1000>;
+			interrupts = <10 3>;
+			interrupt-parent = <&combiner>;
+			status = "disabled";
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prng: rng@10830400 {
+			compatible = "samsung,exynos5250-prng";
+			reg = <0x10830400 0x200>;
+		};
+
+		trng: rng@10830600 {
+			compatible = "samsung,exynos5250-trng";
+			reg = <0x10830600 0x100>;
+		};
+
+		g2d: g2d@10850000 {
+			compatible = "samsung,exynos5250-g2d";
+			reg = <0x10850000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
new file mode 100644
index 000000000..79546f11a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on Exynos5250";
+	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		menu {
+			label = "SW-TACT2";
+			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			wakeup-source;
+		};
+
+		home {
+			label = "SW-TACT3";
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		up {
+			label = "SW-TACT4";
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			wakeup-source;
+		};
+
+		down {
+			label = "SW-TACT5";
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+		};
+
+		back {
+			label = "SW-TACT6";
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		wakeup {
+			label = "SW-TACT7";
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "boe,hv070wsa-100";
+		power-supply = <&vcc_3v3_reg>;
+		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
+		};
+	};
+
+	main_dc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MAIN_DC";
+		regulator-always-on;
+	};
+
+	mmc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MMC";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_hdmi_en: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-en";
+		regulator-always-on;
+	};
+
+	vcc_1v2_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "samsung,arndale-wm1811";
+		samsung,audio-cpu = <&i2s0>;
+		samsung,audio-codec = <&wm1811>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	// SMSC USB3503 connected in hardware only mode as a PHY
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	samsung,burst-clock-frequency = <320000000>;
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	bridge@0 {
+		reg = <0>;
+		compatible = "toshiba,tc358764";
+		vddc-supply = <&vcc_1v2_reg>;
+		vddio-supply = <&vcc_1v8_reg>;
+		vddlvds-supply = <&vcc_3v3_reg>;
+		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@1 {
+			reg = <1>;
+			bridge_out_ep: endpoint {
+				remote-endpoint = <&panel_ep>;
+			};
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	status = "okay";
+	ddc = <&i2c_ddc>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	samsung,i2c-slave-addr = <0x66>;
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
+
+		vinb1-supply = <&main_dc_reg>;
+		vinb2-supply = <&main_dc_reg>;
+		vinb3-supply = <&main_dc_reg>;
+		vinb4-supply = <&main_dc_reg>;
+		vinb5-supply = <&main_dc_reg>;
+		vinb6-supply = <&main_dc_reg>;
+		vinb7-supply = <&main_dc_reg>;
+		vinb8-supply = <&main_dc_reg>;
+		vinb9-supply = <&main_dc_reg>;
+
+		vinl1-supply = <&buck7_reg>;
+		vinl2-supply = <&buck7_reg>;
+		vinl3-supply = <&buck7_reg>;
+		vinl4-supply = <&main_dc_reg>;
+		vinl5-supply = <&main_dc_reg>;
+		vinl6-supply = <&main_dc_reg>;
+		vinl7-supply = <&main_dc_reg>;
+		vinl8-supply = <&buck8_reg>;
+		vinl9-supply = <&buck8_reg>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
+					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+					     <&gpx2 4 GPIO_ACTIVE_HIGH>,
+					     <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap", "unused1", "unused2";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_28IO_DP_1.35V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_COMMON1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_IOPERI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_EXT_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_XPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_COMMON2_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_33ON_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_COMMON3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_ABB2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDQ_C2C_W_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB0_3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_COMMON4_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDQ_MMC2_3_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_33ON_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "EXT_33_OFF";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "EXT_28_OFF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "PVDD_LDO25";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "EXT_18_OFF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <912500>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1.35V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1355000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "PVDD_BUCK7";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "PVDD_BUCK8";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_33_OFF_EXT1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	wm1811: codec@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "MCLK1";
+
+		AVDD2-supply = <&main_dc_reg>;
+		CPVDD-supply = <&main_dc_reg>;
+		DBVDD1-supply = <&main_dc_reg>;
+		DBVDD2-supply = <&main_dc_reg>;
+		DBVDD3-supply = <&main_dc_reg>;
+		LDO1VDD-supply = <&main_dc_reg>;
+		SPKVDD1-supply = <&main_dc_reg>;
+		SPKVDD2-supply = <&main_dc_reg>;
+
+		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	/* used by HDMI PHY */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+};
+
+&i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&i2s0_bus {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
+&mali {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&sata_phy_i2c {
+	status = "okay";
+};
+
+&soc {
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		status = "okay";
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
new file mode 100644
index 000000000..d7d756614
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_gpio_bus: i2c2-gpio-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpc4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpe0-6", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0", "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a: cam-port-a {
+		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_rxd: c2c-rxd {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	c2c_txd: c2c-txd {
+		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
new file mode 100644
index 000000000..06c4e0996
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Samsung SMDK5250 board based on Exynos5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial2:115200n8";
+	};
+
+	vdd: fixed-regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	dbvdd: fixed-regulator-dbvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spkvdd: fixed-regulator-spkvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "samsung,smdk-wm8994";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&wm8994>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+
+		codec_mclk: codec-mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <16934000>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing {
+			/* 1280x800 */
+			clock-frequency = <50000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <4>;
+			hback-porch = <4>;
+			hsync-len = <4>;
+			vback-porch = <4>;
+			vfront-porch = <4>;
+			vsync-len = <4>;
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	eeprom@50 {
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	max77686: pmic@9 {
+		compatible = "maxim,max77686";
+		reg = <0x09>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		#clock-cells = <1>;
+		wakeup-source;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.2V_LDO_OUT2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "P2.8V_LDO_OUT4";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.8V_LDO_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "P1.1V_LDO_OUT6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	eeprom@51 {
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	wm8994: wm8994@1a {
+		compatible = "wlf,wm8994";
+		reg = <0x1a>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		clocks = <&codec_mclk>;
+		clock-names = "MCLK1";
+
+		AVDD2-supply = <&vdd>;
+		CPVDD-supply = <&vdd>;
+		DBVDD-supply = <&dbvdd>;
+		SPKVDD1-supply = <&spkvdd>;
+		SPKVDD2-supply = <&spkvdd>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	/* used by HDMI DDC */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+	status = "okay";
+	/* used by HDMI PHY */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&sata_phy_i2c {
+	status = "okay";
+};
+
+&spi_1 {
+	status = "okay";
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+	w25q80bw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25x80";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0xc0000>;
+		};
+	};
+};
+
+&pinctrl_0 {
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000..737f0e20a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5250.dtsi"
+
+/ {
+	aliases {
+		i2c104 = &i2c_104;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c_4>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller@1e {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	sound {
+		samsung,i2s-controller = <&i2s0>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hdmicec {
+	status = "okay";
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad@67 {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+};
+
+&i2c_2 {
+	status = "okay";
+	/* used by HDMI DDC */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	/* used by HDMI PHY */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+};
+
+&i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&mali {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	non-removable;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+/* uSD card */
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ *
+ * WiFi SDIO module
+ */
+&mmc_3 {
+	status = "okay";
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wifi_rst: wifi-rst {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000..7cbfc6f1f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow Rev 5+";
+	compatible = "google,snow-rev5", "samsung,exynos5250",
+		"samsung,exynos5";
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Snow-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>, <&hdmi>;
+		};
+	};
+};
+
+&i2c_7 {
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
new file mode 100644
index 000000000..75fdc5e6d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+		"samsung,exynos5";
+
+	sound {
+		compatible = "google,snow-audio-max98095";
+
+		samsung,model = "Snow-I2S-MAX98095";
+		samsung,audio-codec = <&max98095>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98095 0>, <&hdmi>;
+		};
+	};
+};
+
+&i2c_7 {
+	max98095: codec@11 {
+		compatible = "maxim,max98095";
+		reg = <0x11>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98095_en>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
+	};
+};
+
+&pinctrl_0 {
+	max98095_en: max98095-en {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
new file mode 100644
index 000000000..5a9c93640
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Spring";
+	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <1>;
+	hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+					      <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+					      <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+					     <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+					     <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+		/*
+		 * The following arrays of DVS voltages are not used, since we are
+		 * not using GPIOs to control PMIC bucks, but they must be defined
+		 * to please the driver.
+		 */
+		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+					     "en32khz_cp",
+					     "en32khz_bt";
+		};
+
+		regulators {
+			ldo4_reg: LDO4 {
+				regulator-name = "P1.0V_LDO_OUT4";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.0V_LDO_OUT5";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_mydp";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "P2.8V_LDO_OUT17";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_bridge";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.2V_BUCK_OUT6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <0>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_ummc";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     BTN_LEFT>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+};
+
+&i2c_2 {
+	status = "okay";
+	/* used by HDMI DDC */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	cros_ec: embedded-controller@1e {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	temperature-sensor@4c {
+		compatible = "gmt,g781";
+		reg = <0x4c>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	/* used by HDMI PHY */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	s5m8767_dvs: s5m8767-dvs {
+		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	dp_hpd_gpio: dp-hpd {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_ds: s5m8767-ds {
+		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd1_cd {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd1_cmd {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
new file mode 100644
index 000000000..62051e600
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -0,0 +1,1233 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung Exynos5250 SoC device nodes are listed in this file.
+ * Exynos5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
+ * additional nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/exynos5250.h>
+#include "exynos5.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+	compatible = "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		gsc3 = &gsc_3;
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
+		mshc3 = &mmc_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
+		i2c9 = &i2c_9;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>, <22 4>;
+	};
+
+	soc: soc {
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x30000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x30000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
+		};
+
+		pd_gsc: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSC";
+		};
+
+		pd_mfc: power-domain@10044040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044040 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		pd_g3d: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		pd_disp1: power-domain@100440a0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440A0 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP1";
+		};
+
+		pd_mau: power-domain@100440c0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440C0 0x20>;
+			#power-domain-cells = <0>;
+			label = "MAU";
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5250-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5250-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+			power-domains = <&pd_mau>;
+		};
+
+		timer@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&combiner 23 3>,
+					      <&combiner 23 4>,
+					      <&combiner 25 2>,
+					      <&combiner 25 3>,
+					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_1: pinctrl@13400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_3: pinctrl@3860000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mau>;
+		};
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5250-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		watchdog@101d0000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x101D0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
+
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v6";
+			reg = <0x11000000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
+
+		rotator: rotator@11c00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
+
+		mali: gpu@11800000 {
+			compatible = "samsung,exynos5250-mali", "arm,mali-t604";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&pd_g3d>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					opp-microvolt = <925000>;
+				};
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-microvolt = <925000>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <1075000>;
+				};
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-microvolt = <1125000>;
+				};
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-microvolt = <1150000>;
+				};
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					opp-microvolt = <1250000>;
+				};
+			};
+		};
+
+		tmu: tmu@10060000 {
+			compatible = "samsung,exynos5250-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		sata: sata@122f0000 {
+			compatible = "snps,dwc-ahci";
+			samsung,sata-freq = <66>;
+			reg = <0x122F0000 0x1ff>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+			clock-names = "sata", "sclk_sata";
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			status = "disabled";
+		};
+
+		sata_phy: sata-phy@12170000 {
+			compatible = "samsung,exynos5250-sata-phy";
+			reg = <0x12170000 0x1ff>;
+			clocks = <&clock CLK_SATA_PHYCTRL>;
+			clock-names = "sata_phyctrl";
+			#phy-cells = <0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		i2c_4: i2c@12ca0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CA0000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@12cb0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CB0000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@12cc0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CC0000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@12cd0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12CD0000 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		i2c_8: i2c@12ce0000 {
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x12CE0000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+
+			hdmiphy: hdmiphy@38 {
+				compatible = "samsung,exynos4212-hdmiphy";
+				reg = <0x38>;
+			};
+		};
+
+		i2c_9: i2c@121d0000 {
+			compatible = "samsung,exynos5-sata-phy-i2c";
+			reg = <0x121D0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SATA_PHYI2C>;
+			clock-names = "i2c";
+			status = "disabled";
+
+			sata_phy_i2c: sata-phy-i2c@38 {
+				compatible = "samsung,exynos-sataphy-i2c";
+				reg = <0x38>;
+				status = "disabled";
+			};
+		};
+
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d20000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+		};
+
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d30000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+		};
+
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d40000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x1000>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x1000>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_3: mmc@12230000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12230000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			status = "disabled";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10>,
+				<&pdma0 9>,
+				<&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			power-domains = <&pd_mau>;
+			#clock-cells = <1>;
+			#sound-dai-cells = <1>;
+		};
+
+		i2s1: i2s@12d60000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12>,
+				<&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			power-domains = <&pd_mau>;
+			#sound-dai-cells = <1>;
+		};
+
+		i2s2: i2s@12d70000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12>,
+				<&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			power-domains = <&pd_mau>;
+			#sound-dai-cells = <1>;
+		};
+
+		usb_dwc3 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USB3>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3: dwc3@12000000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy: phy@12100000 {
+			compatible = "samsung,exynos5250-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		ehci: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
+		};
+
+		ohci: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
+			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
+		};
+
+		usb2_phy_gen: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+		};
+
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11c10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		gsc_0: gsc@13e00000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc0>;
+		};
+
+		gsc_1: gsc@13e10000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc1>;
+		};
+
+		gsc_2: gsc@13e20000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e20000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL2>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc2>;
+		};
+
+		gsc_3: gsc@13e30000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e30000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL3>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc3>;
+		};
+
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos4212-hdmi";
+			reg = <0x14530000 0x70000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+					"sclk_hdmiphy", "mout_hdmi";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			phy = <&hdmiphy>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmicec: cec@101b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x101B0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
+
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5250-mixer";
+			reg = <0x14450000 0x10000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
+
+		dp_phy: video-phy {
+			compatible = "samsung,exynos5250-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
+
+		mipi_phy: video-phy@10040710 {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			reg = <0x10040710 0x100>;
+			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
+		};
+
+		dsi_0: dsi@14500000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,power-domain = <&pd_disp1>;
+			phys = <&mipi_phy 3>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		adc: adc@12d10000 {
+			compatible = "samsung,exynos-adc-v1";
+			reg = <0x12D10000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		sysmmu_g2d: sysmmu@10a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_r: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_l: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_rotator: sysmmu@11d40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg: sysmmu@11f20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_isp: sysmmu@13260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ISP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_drc: sysmmu@13270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DRC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_fd: sysmmu@132a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132A0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_FD>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_scc: sysmmu@13280000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13280000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_scp: sysmmu@13290000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13290000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132B0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_MCU>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_odc: sysmmu@132c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ODC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_dis0: sysmmu@132d0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_dis1: sysmmu@132e0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <9 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_3dnr: sysmmu@132f0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132F0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite0: sysmmu@13c40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite1: sysmmu@13c50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13C50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 1>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gsc0: sysmmu@13e80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gsc1: sysmmu@13e90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gsc2: sysmmu@13ea0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EA0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gsc3: sysmmu@13eb0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13EB0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 6>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			#iommu-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Unfortunately we need this since some versions
+		 * of U-Boot on Exynos don't set the CNTFRQ register,
+		 * so we need the value from DT.
+		 */
+		clock-frequency = <24000000>;
+	};
+};
+
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+	thermal-sensors = <&tmu>;
+
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 15 15>,
+					 <&cpu1 15 15>;
+		};
+	};
+};
+
+&dp {
+	power-domains = <&pd_disp1>;
+	clocks = <&clock CLK_DP>;
+	clock-names = "dp";
+	phys = <&dp_phy>;
+	phy-names = "dp";
+};
+
+&fimd {
+	power-domains = <&pd_disp1>;
+	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+	clock-names = "sclk_fimd", "fimd";
+	iommus = <&sysmmu_fimd1>;
+};
+
+&g2d {
+	iommus = <&sysmmu_g2d>;
+	clocks = <&clock CLK_G2D>;
+	clock-names = "fimg2d";
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+#include "exynos5250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 000000000..17e2f3e0d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	usb3_vbus0_en: usb3-vbus0-en {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	spdif1_bus: spdif1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb4-2", "gpb4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb4-4", "gpb4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb4-6", "gpb4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c8_bus: i2c8-bus {
+		samsung,pins = "gpb5-0", "gpb5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c9_bus: i2c9-bus {
+		samsung,pins = "gpb5-2", "gpb5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c10_bus: i2c10-bus {
+		samsung,pins = "gpb5-4", "gpb5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	i2c11_bus: i2c11-bus {
+		samsung,pins = "gpb5-6", "gpb5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			"gpe1-0", "gpe1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
+	};
+};
+
+&pinctrl_2 {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
new file mode 100644
index 000000000..0dc2ec16a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung XYREF5260 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5260.dtsi"
+
+/ {
+	model = "Samsung XYREF5260 board based on Exynos5260";
+	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xrtcxti: xrtcxti {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xrtcxti";
+		#clock-cells = <0>;
+	};
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	cap-mmc-highspeed;
+	supports-hs200-mode; /* 200 MHz */
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 000000000..973448c4a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,exynos5260", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_top: clock-controller@10010000 {
+			compatible = "samsung,exynos5260-clock-top";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peri: clock-controller@10200000 {
+			compatible = "samsung,exynos5260-clock-peri";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_egl: clock-controller@10600000 {
+			compatible = "samsung,exynos5260-clock-egl";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_kfc: clock-controller@10700000 {
+			compatible = "samsung,exynos5260-clock-kfc";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g2d: clock-controller@10a00000 {
+			compatible = "samsung,exynos5260-clock-g2d";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mif: clock-controller@10ce0000 {
+			compatible = "samsung,exynos5260-clock-mif";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mfc: clock-controller@11090000 {
+			compatible = "samsung,exynos5260-clock-mfc";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g3d: clock-controller@11830000 {
+			compatible = "samsung,exynos5260-clock-g3d";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_fsys: clock-controller@122e0000 {
+			compatible = "samsung,exynos5260-clock-fsys";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_aud: clock-controller@128c0000 {
+			compatible = "samsung,exynos5260-clock-aud";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_isp: clock-controller@133c0000 {
+			compatible = "samsung,exynos5260-clock-isp";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_gscl: clock-controller@13f00000 {
+			compatible = "samsung,exynos5260-clock-gscl";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_disp: clock-controller@14550000 {
+			compatible = "samsung,exynos5260-clock-disp";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x2000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: timer@100b0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x100B0000 0x1000>;
+			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cci: cci@10f00000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10F00000 0x1000>;
+			ranges = <0x0 0x10F00000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11600000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x11600000 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_1: pinctrl@12290000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x12290000 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_2: pinctrl@128b0000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x128B0000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@10d50000 {
+			compatible = "samsung,exynos5260-pmu", "syscon";
+			reg = <0x10D50000 0x10000>;
+		};
+
+		uart0: serial@12c00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12c10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart3: serial@12860000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12860000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12140000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC0>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12150000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12150000 0x2000>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC1>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12160000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12160000 0x2000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC2>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		hsi2c_0: hsi2c@12da0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12DA0000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@12db0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12DB0000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@12dc0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12DC0000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@12dd0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12DD0000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000..147c077e8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audi2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+&audi2s0 {
+	status = "okay";
+};
+
+&clock {
+	clocks = <&fin_pll>;
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <192000000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates = <0>,
+			       <0>,
+			       <96000000>,
+			       <19200000>;
+};
+
+&cpu0_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+
+	trips {
+		cpu_alert0: cpu-alert-0 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert1: cpu-alert-1 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert2: cpu-alert-2 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&fan0 1 2>;
+		};
+		map2 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&fan0 2 3>;
+		};
+	};
+};
+
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	usb3503: usb-hub@8 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+
+		clock-names = "refclk";
+		clocks = <&pmu_system_controller 0>;
+		refclk-frequency = <24000000>;
+	};
+
+	max77802: pmic@9 {
+		compatible = "maxim,max77802";
+		reg = <0x9>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
+			    <&pmic_dvs_3>;
+		#clock-cells = <1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&buck10_reg>;
+		inl7-supply = <&buck9_reg>;
+		/* inl9 supply is BOOST, not configured here */
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				/* vdd_mmc0 */
+				regulator-name = "vddf_2v85";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "buck9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "buck10";
+				regulator-min-microvolt = <2950000>;
+				regulator-max-microvolt = <2950000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_alive";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vddq_m1_m2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_gpio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				/* Having it off prevents reboot */
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd18_hsic";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd18_bpll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vddq_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/* Supplies also GPK and GPJ */
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd10_hdmi";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "ldo9";
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd18_mipi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vddq_mmc01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Having it off prevents accessing MMC after
+				 * reboot with error:
+				 * MMC Device 1: Clock OFF has been failed.
+				 */
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd33_usb3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_abbg0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vddq_abbg1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd10_usb3";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "ldo16";
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "cam_sensor_core";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo19";
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "vdd_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* vdd_mmc2 */
+				regulator-name = "vddf_2v8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "ldo22";
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "dp_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "cam_af";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "eth_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "usb30_extclk";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo27";
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo28";
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vddq_e1_e2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "ldo31";
+			};
+
+			/* On revisions with ti,ina231 this is sensor VS */
+			ldo32_reg: LDO32 {
+				regulator-name = "vs_power_meter";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo33";
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo34";
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo35";
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpj3>;
+		interrupts = <0 IRQ_TYPE_NONE>;
+		clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&ldo20_reg>;
+	vqmmc-supply = <&ldo11_reg>;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd2_wp: sd2-wp {
+		samsung,pins = "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		/* Pin is floating so be sure to disable write-protect */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-val = <1>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000..d0aa18443
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              https://www.hardkernel.com
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	usb3_1_oc: usb3-1-oc {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	audi2s0_bus: audi2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
new file mode 100644
index 000000000..2a3ade77a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+/ {
+	model = "Samsung SMDK5410 board based on Exynos5410";
+	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	pmic_ap_clk: pmic-ap-clk {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	firmware@2037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	cap-mmc-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <4>;
+	disable-wp;
+};
+
+&pinctrl_0 {
+	srom_ctl: srom-ctl {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	srom_ebi: srom-ebi {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@3,0 {
+		compatible = "smsc,lan9115";
+		reg = <3 0 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 9 1 1>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
new file mode 100644
index 000000000..584ce6236
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung Exynos5410 SoC device nodes are listed in this file.
+ * Exynos5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ */
+
+#include "exynos54xx.dtsi"
+#include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5410", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1600000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5410-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&fin_pll>;
+			#clock-cells = <1>;
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5410-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
+			clock-names = "pll_ref", "pll_in";
+		};
+
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10068000 0x100>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x1006c000 0x100>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12200000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12210000 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12220000 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_1: pinctrl@14000000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_3: pinctrl@3860000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121a0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121b0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		audi2s0: i2s@3830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10>,
+				<&pdma0 9>,
+				<&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audi2s0_bus>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+	};
+};
+
+&adc {
+	clocks = <&clock CLK_TSADC>;
+	clock-names = "adc";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&fin_pll>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
+};
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5410-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
new file mode 100644
index 000000000..3d9b93d2b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -0,0 +1,826 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 based Arndale Octa board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	model = "Insignal Arndale Octa evaluation board based on Exynos5420";
+	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SW-TACT1";
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
+};
+
+&cci {
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&cpu0_thermal {
+	trips {
+		cpu0_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * Reduce the CPU speed by 2 steps, down to: 1600 MHz
+		 * and 1100 MHz.
+		 */
+		map0 {
+			trip = <&cpu0_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		/*
+		 * Reduce the CPU speed down to 1200 MHz big (6 steps)
+		 * and 800 MHz LITTLE (5 steps).
+		 */
+		map1 {
+			trip = <&cpu0_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		/*
+		 * Reduce the CPU speed as much as possible, down to 700 MHz
+		 * big (11 steps) and 600 MHz LITTLE (7 steps).
+		 */
+		map2 {
+			trip = <&cpu0_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&cpu1_thermal {
+	trips {
+		cpu1_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu1_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu1_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu1_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&cpu2_thermal {
+	trips {
+		cpu2_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu2_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu2_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu2_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 6 7>,
+					 <&cpu5 6 7>,
+					 <&cpu6 6 7>,
+					 <&cpu7 6 7>;
+		};
+	};
+};
+
+&cpu3_thermal {
+	trips {
+		cpu3_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu3_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu3_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu3_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "PVDD_ALIVE_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "PVDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "PVDD_APIO_MMCON_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Must be always on, even though there is
+				 * a consumer (mmc_0).  Otherwise the board
+				 * does not reboot with vendor U-Boot
+				 * (Linaro for Arndale Octa, v2012.07).
+				 */
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "PVDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "PVDD_PLL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "PVDD_ANAIP_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "PVDD_ANAIP_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "PVDD_ABB_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "PVDD_USB_3V3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "PVDD_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "PVDD_USB_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PVDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "PVDD_APIO_MMCOFF_2V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				/* Unused */
+				regulator-name = "PVDD_LDO14";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "PVDD_PERI_2V8";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "PVDD_PERI_3V3";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				/* Unused */
+				regulator-name = "PVDD_LDO17";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "PVDD_EMMC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Must stay in "off" mode during shutdown for
+				 * proper eMMC reset.  The "off" mode is in
+				 * fact controlled by LDO18EN.  The eMMC does
+				 * not have reset pin connected so the reset
+				 * will be triggered by falling edge of
+				 * LDO18EN.
+				 */
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "PVDD_TFLASH_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "PVDD_BTWIFI_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "PVDD_CAM1IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				/* Unused */
+				regulator-name = "PVDD_LDO22";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "PVDD_MIFS_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "PVDD_CAM1_AVDD_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "PVDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "PVDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "PVDD_G3DS_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "PVDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "PVDD_AUDIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo30_reg: LDO30 {
+				/* Unused */
+				regulator-name = "PVDD_LDO30";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "PVDD_PERI_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "PVDD_LCD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "PVDD_CAM0IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo34_reg: LDO34 {
+				/* Unused */
+				regulator-name = "PVDD_LDO34";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "PVDD_CAM0_DVDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "PVDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "PVDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "PVDD_CAM0_AVDD_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "PVDD_MIF_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "PVDD_ARM_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "PVDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "PVDD_G3D_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "PVDD_LPDDR3_1V2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "PVDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "PVDD_EMMCF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				/*
+				 * Must stay in "off" mode during shutdown for
+				 * proper eMMC reset.  The "off" mode is in
+				 * fact controlled by BUCK10EN.  The eMMC does
+				 * not have reset pin connected so the reset
+				 * will be triggered by falling edge of
+				 * BUCK10EN.
+				 */
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	vmmc-supply = <&ldo18_reg>;
+	vqmmc-supply = <&ldo3_reg>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
new file mode 100644
index 000000000..58d1c54cf
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5420 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5420 and Exynos5800
+ * boards: CPU[0123] being the A15.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+	};
+};
+
+&arm_a7_pmu {
+	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	status = "okay";
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
new file mode 100644
index 000000000..2bcbdf8a3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,1118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = &i2c_tunnel;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		power-supply = <&tps65090_fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Peach-Pit-I2S-MAX98090";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090>, <&hdmi>;
+		};
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc1_pwrseq: mmc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77802 MAX77802_CLK_32K_CP>;
+		clock-names = "ext_clock";
+	};
+};
+
+&adc {
+	status = "okay";
+	vdd-supply = <&ldo9_reg>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max77802: max77802-pmic@9 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&gpx3>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+		wakeup-source;
+		reg = <0x9>;
+		#clock-cells = <1>;
+
+		inb1-supply = <&tps65090_dcdc2>;
+		inb2-supply = <&tps65090_dcdc1>;
+		inb3-supply = <&tps65090_dcdc2>;
+		inb4-supply = <&tps65090_dcdc2>;
+		inb5-supply = <&tps65090_dcdc1>;
+		inb6-supply = <&tps65090_dcdc2>;
+		inb7-supply = <&tps65090_dcdc1>;
+		inb8-supply = <&tps65090_dcdc1>;
+		inb9-supply = <&tps65090_dcdc1>;
+		inb10-supply = <&tps65090_dcdc1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&tps65090_dcdc2>;
+		inl7-supply = <&buck9_reg>;
+		inl9-supply = <&tps65090_dcdc2>;
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_1v2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1v35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2v";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_1v2_2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_1v8_3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			vqmmc_sdcard: ldo4_reg: LDO4 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_1v8_5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_1v8_6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_1v8_7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo_19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "ldo_20";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "ldo_21";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "ldo_23";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			ldo24_reg: LDO24 {
+				regulator-name = "ldo_24";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "ldo_25";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "ldo_26";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo_27";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo_28";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo_29";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "ldo_32";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo_33";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo_34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo_35";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29018";
+		reg = <0x44>;
+		vcc-supply = <&tps65090_fet5>;
+	};
+
+	ps8625: lvds-bridge@48 {
+		compatible = "parade,ps8625";
+		reg = <0x48>;
+		sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+		lane-count = <2>;
+		use-external-pwm;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+
+	/* Atmel mXT336S */
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED	/* GPIO0 */
+				     KEY_RESERVED	/* GPIO1 */
+				     KEY_RESERVED	/* GPIO2 */
+				     BTN_LEFT>;		/* GPIO3 */
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+	bus-width = <8>;
+};
+
+/* WiFi SDIO module */
+&mmc_1 {
+	status = "okay";
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+		    <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc1_pwrseq>;
+	vqmmc-supply = <&buck10_reg>;
+};
+
+/* uSD card */
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpy7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	/* Adjust WiFi drive strengths lower for EMI */
+	sd1_clk: sd1-clk {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_2 {
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpj4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpj4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_selb: pmic-selb {
+		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
+			       "gph0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&tps65090_dcdc1>;
+				infet3-supply = <&tps65090_dcdc2>;
+				infet4-supply = <&tps65090_dcdc2>;
+				infet5-supply = <&tps65090_dcdc2>;
+				infet6-supply = <&tps65090_dcdc2>;
+				infet7-supply = <&tps65090_dcdc1>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
+#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
new file mode 100644
index 000000000..b82af7c89
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -0,0 +1,734 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dp_hpd: dp_hpd {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rclk: sd0-rclk {
+		samsung,pins = "gpc0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_wp: sd2-wp {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_2 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus {
+		samsung,pins = "gpf0-4", "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c8_hs_bus: i2c8-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c9_hs_bus: i2c9-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c10_hs_bus: i2c10-hs-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_4 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
new file mode 100644
index 000000000..741294bd5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung SMDK5420 board based on Exynos5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "init=/linuxrc";
+		stdout-path = "serial2:115200n8";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	vdd: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	dbvdd: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spkvdd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	usb300_vbus_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&dp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <50000>;
+			hactive = <2560>;
+			vactive = <1600>;
+			hfront-porch = <48>;
+			hback-porch = <80>;
+			hsync-len = <32>;
+			vback-porch = <16>;
+			vfront-porch = <8>;
+			vsync-len = <6>;
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <3100000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "vdd_ldo16";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "tsp_avdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "tsp_io";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1.0v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_1.8v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2.8v_ldo";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_vmem";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	/* used by HDMI DDC */
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
+		     &sd0_rclk>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gpg0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gpg1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
new file mode 100644
index 000000000..a67a38071
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for default Exynos5420 thermal zone definition
+ *
+ * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
+ */
+
+polling-delay-passive = <0>;
+polling-delay = <0>;
+trips {
+	cpu-alert-0 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-1 {
+		temperature = <103000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-alert-2 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "active";
+	};
+	cpu-crit-0 {
+		temperature = <120000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
new file mode 100644
index 000000000..34886535f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -0,0 +1,1416 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5420 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung Exynos5420 SoC device nodes are listed in this file.
+ * Exynos5420 based board files can include this file and provide
+ * values for board specfic bindings.
+ */
+
+#include "exynos54xx.dtsi"
+#include <dt-bindings/clock/exynos5420.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5420", "samsung,exynos5";
+
+	aliases {
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		pinctrl4 = &pinctrl_4;
+		i2c8 = &hsi2c_8;
+		i2c9 = &hsi2c_9;
+		i2c10 = &hsi2c_10;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	/*
+	 * The 'cpus' node is not present here but instead it is provided
+	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
+	 */
+
+	cluster_a15_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1250000 1250000 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1212500 1212500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1175000 1175000 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1137500 1137500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1112500 1112500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500 1062500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500 1037500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500 1012500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = < 987500 987500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = < 962500 962500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = < 937500 937500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = < 912500 912500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
+	cluster_a7_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1275000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1162500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
+	soc: soc {
+		cci: cci@10d20000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10d20000 0x1000>;
+			ranges = <0x0 0x10d20000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5420-clock", "syscon";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5420-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+			power-domains = <&mau_pd>;
+		};
+
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x11000000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			power-domains = <&mfc_pd>;
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x2000>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x2000>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		dmc: memory-controller@10c20000 {
+			compatible = "samsung,exynos5422-dmc";
+			reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 0>, <16 1>;
+			interrupt-names = "drex_0", "drex_1";
+			clocks = <&clock CLK_FOUT_SPLL>,
+				 <&clock CLK_MOUT_SCLK_SPLL>,
+				 <&clock CLK_FF_DOUT_SPLL2>,
+				 <&clock CLK_FOUT_BPLL>,
+				 <&clock CLK_MOUT_BPLL>,
+				 <&clock CLK_SCLK_BPLL>,
+				 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+				 <&clock CLK_MOUT_MCLK_CDREX>;
+			clock-names = "fout_spll",
+				      "mout_sclk_spll",
+				      "ff_dout_spll2",
+				      "fout_bpll",
+				      "mout_bpll",
+				      "sclk_bpll",
+				      "mout_mx_mspll_ccore",
+				      "mout_mclk_cdrex";
+			samsung,syscon-clk = <&clock>;
+			status = "disabled";
+		};
+
+		nocp_mem0_0: nocp@10ca1000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1000 0x200>;
+			status = "disabled";
+		};
+
+		nocp_mem0_1: nocp@10ca1400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1400 0x200>;
+			status = "disabled";
+		};
+
+		nocp_mem1_0: nocp@10ca1800 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1800 0x200>;
+			status = "disabled";
+		};
+
+		nocp_mem1_1: nocp@10ca1c00 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10CA1C00 0x200>;
+			status = "disabled";
+		};
+
+		nocp_g3d_0: nocp@11a51000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51000 0x200>;
+			status = "disabled";
+		};
+
+		nocp_g3d_1: nocp@11a51400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11A51400 0x200>;
+			status = "disabled";
+		};
+
+		ppmu_dmc0_0: ppmu@10d00000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d00000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
+					event-name = "ppmu-event3-dmc0_0";
+				};
+			};
+		};
+
+		ppmu_dmc0_1: ppmu@10d10000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d10000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
+					event-name = "ppmu-event3-dmc0_1";
+				};
+			};
+		};
+
+		ppmu_dmc1_0: ppmu@10d60000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d60000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
+					event-name = "ppmu-event3-dmc1_0";
+				};
+			};
+		};
+
+		ppmu_dmc1_1: ppmu@10d70000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d70000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
+					event-name = "ppmu-event3-dmc1_1";
+				};
+			};
+		};
+
+		gsc_pd: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSC";
+		};
+
+		isp_pd: power-domain@10044020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044020 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
+
+		mfc_pd: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		g3d_pd: power-domain@10044080 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044080 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		disp_pd: power-domain@100440c0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440C0 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP";
+		};
+
+		mau_pd: power-domain@100440e0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440E0 0x20>;
+			#power-domain-cells = <0>;
+			label = "MAU";
+		};
+
+		msc_pd: power-domain@10044120 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044120 0x20>;
+			#power-domain-cells = <0>;
+			label = "MSC";
+		};
+
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_1: pinctrl@13410000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13410000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_2: pinctrl@14000000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_3: pinctrl@14010000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14010000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_4: pinctrl@3860000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mau_pd>;
+		};
+
+		adma: adma@3880000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x03880000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_audss EXYNOS_ADMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <6>;
+			#dma-requests = <16>;
+			power-domains = <&mau_pd>;
+		};
+
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11c10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in
+			 * the kernel for boards that run in secure
+			 * mode, we are getting imprecise external
+			 * aborts causing the kernel to oops.
+			 */
+			status = "disabled";
+		};
+
+		i2s0: i2s@3830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&adma 0>,
+				<&adma 2>,
+				<&adma 1>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			power-domains = <&mau_pd>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@12d60000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D60000 0x100>;
+			dmas = <&pdma1 12>,
+				<&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@12d70000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12D70000 0x100>;
+			dmas = <&pdma0 12>,
+				<&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d20000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
+
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d30000 0x100>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
+
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d40000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
+
+		dp_phy: dp-video-phy {
+			compatible = "samsung,exynos5420-dp-video-phy";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+		};
+
+		mipi_phy: mipi-video-phy {
+			compatible = "samsung,exynos5420-mipi-video-phy";
+			syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		dsi@14500000 {
+			compatible = "samsung,exynos5410-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_8: i2c@12e00000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E00000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_hs_bus>;
+			clocks = <&clock CLK_USI4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: i2c@12e10000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E10000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c9_hs_bus>;
+			clocks = <&clock CLK_USI5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: i2c@12e20000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12E20000 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c10_hs_bus>;
+			clocks = <&clock CLK_USI6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos5420-hdmi";
+			reg = <0x14530000 0x70000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+			phy = <&hdmiphy>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+			power-domains = <&disp_pd>;
+			#sound-dai-cells = <0>;
+		};
+
+		hdmiphy: hdmiphy@145d0000 {
+			reg = <0x145D0000 0x20>;
+		};
+
+		hdmicec: cec@101b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x101B0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
+
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5420-mixer";
+			reg = <0x14450000 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			power-domains = <&disp_pd>;
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
+
+		rotator: rotator@11c00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11C00000 0x64>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
+
+		gsc_0: video-scaler@13e00000 {
+			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl0>;
+		};
+
+		gsc_1: video-scaler@13e10000 {
+			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl1>;
+		};
+
+		gpu: gpu@11800000 {
+			compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			power-domains = <&g3d_pd>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-microvolt = <812500>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <862500>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <912500>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <962500>;
+				};
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-543000000 {
+					opp-hz = /bits/ 64 <543000000>;
+					opp-microvolt = <1037500>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
+
+		scaler_0: scaler@12800000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12800000 0x1294>;
+			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL0>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>;
+		};
+
+		scaler_1: scaler@12810000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12810000 0x1294>;
+			interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL1>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>;
+		};
+
+		scaler_2: scaler@12820000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12820000 0x1294>;
+			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL2>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>;
+		};
+
+		jpeg_0: jpeg@11f50000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F50000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG>;
+			iommus = <&sysmmu_jpeg0>;
+		};
+
+		jpeg_1: jpeg@11f60000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11F60000 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG2>;
+			iommus = <&sysmmu_jpeg1>;
+		};
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5420-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_gpu: tmu@100a0000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		sysmmu_g2dr: sysmmu@10a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_g2dw: sysmmu@10a70000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10A70000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl0: sysmmu@13e80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_gscl1: sysmmu@13e90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13E90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler0r: sysmmu@12880000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12880000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler1r: sysmmu@12890000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12890000 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler2r: sysmmu@128a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128A0000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler0w: sysmmu@128c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128C0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <27 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler1w: sysmmu@128d0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128D0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_scaler2w: sysmmu@128e0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128E0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <19 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_rotator: sysmmu@11d40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11D40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg0: sysmmu@11f10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F10000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_jpeg1: sysmmu@11f20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11F20000 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_l: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_mfc_r: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1_0: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1_1: sysmmu@14680000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14680000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
+
+		bus_wcore: bus_wcore {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_noc: bus_noc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_fsys_apb: bus_fsys_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_fsys: bus_fsys {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_fsys2: bus_fsys2 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_mfc: bus_mfc {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_gen: bus_gen {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_peri: bus_peri {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK66>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_g2d: bus_g2d {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_g2d_acp: bus_g2d_acp {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_jpeg: bus_jpeg {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_jpeg_apb: bus_jpeg_apb {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK166>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_disp1_fimd: bus_disp1_fimd {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_disp1: bus_disp1 {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_gscl_scaler: bus_gscl_scaler {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+
+		bus_mscl: bus_mscl {
+			compatible = "samsung,exynos-bus";
+			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+			clock-names = "bus";
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+	};
+};
+
+&adc {
+	clocks = <&clock CLK_TSADC>;
+	clock-names = "adc";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+&dp {
+	clocks = <&clock CLK_DP1>;
+	clock-names = "dp";
+	phys = <&dp_phy>;
+	phy-names = "dp";
+	power-domains = <&disp_pd>;
+};
+
+&fimd {
+	compatible = "samsung,exynos5420-fimd";
+	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+	clock-names = "sclk_fimd", "fimd";
+	power-domains = <&disp_pd>;
+	iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
+	iommu-names = "m0", "m1";
+};
+
+&g2d {
+	iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>;
+	clocks = <&clock CLK_G2D>;
+	clock-names = "fimg2d";
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5420-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
new file mode 100644
index 000000000..4b641b9b8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5422 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+	};
+};
+
+&arm_a7_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
new file mode 100644
index 000000000..d51c1d862
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -0,0 +1,1070 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7EA00000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	bus_wcore_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+			opp-microvolt = <925000 925000 1400000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <177400000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <532000000>;
+			opp-microvolt = <1000000 1000000 1400000>;
+		};
+	};
+
+	bus_noc_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <74000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+	};
+
+	bus_fsys_apb_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+	};
+
+	bus_fsys2_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_mfc_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_gen_opp_table: opp_table7 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table8 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+	};
+
+	bus_g2d_opp_table: opp_table9 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_g2d_acp_opp_table: opp_table10 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_jpeg_opp_table: opp_table11 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_jpeg_apb_opp_table: opp_table12 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_disp1_fimd_opp_table: opp_table13 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_disp1_opp_table: opp_table14 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp_table15 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_mscl_opp_table: opp_table16 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <666000000>;
+		};
+	};
+
+	dmc_opp_table: opp_table17 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <165000000>;
+			opp-microvolt = <875000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <206000000>;
+			opp-microvolt = <875000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <875000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <413000000>;
+			opp-microvolt = <887500>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <543000000>;
+			opp-microvolt = <937500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <633000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <728000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	samsung_K3QF2F20DB: lpddr3 {
+		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+		density		= <16384>;
+		io-width	= <32>;
+		#address-cells	= <1>;
+		#size-cells	= <0>;
+
+		tRFC-min-tck		= <17>;
+		tRRD-min-tck		= <2>;
+		tRPab-min-tck		= <2>;
+		tRPpb-min-tck		= <2>;
+		tRCD-min-tck		= <3>;
+		tRC-min-tck		= <6>;
+		tRAS-min-tck		= <5>;
+		tWTR-min-tck		= <2>;
+		tWR-min-tck		= <7>;
+		tRTP-min-tck		= <2>;
+		tW2W-C2C-min-tck	= <0>;
+		tR2R-C2C-min-tck	= <0>;
+		tWL-min-tck		= <8>;
+		tDQSCK-min-tck		= <5>;
+		tRL-min-tck		= <14>;
+		tFAW-min-tck		= <5>;
+		tXSR-min-tck		= <12>;
+		tXP-min-tck		= <2>;
+		tCKE-min-tck		= <2>;
+		tCKESR-min-tck		= <2>;
+		tMRD-min-tck		= <5>;
+
+		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+			compatible	= "jedec,lpddr3-timings";
+			/* workaround: 'reg' shows max-freq */
+			reg		= <800000000>;
+			min-freq	= <100000000>;
+			tRFC		= <65000>;
+			tRRD		= <6000>;
+			tRPab		= <12000>;
+			tRPpb		= <12000>;
+			tRCD		= <10000>;
+			tRC		= <33750>;
+			tRAS		= <23000>;
+			tWTR		= <3750>;
+			tWR		= <7500>;
+			tRTP		= <3750>;
+			tW2W-C2C	= <0>;
+			tR2R-C2C	= <0>;
+			tFAW		= <25000>;
+			tXSR		= <70000>;
+			tXP		= <3750>;
+			tCKE		= <3750>;
+			tCKESR		= <3750>;
+			tMRD		= <7000>;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
+};
+
+&bus_wcore {
+	operating-points-v2 = <&bus_wcore_opp_table>;
+	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+			<&nocp_mem1_0>, <&nocp_mem1_1>;
+	vdd-supply = <&buck3_reg>;
+	exynos,saturation-ratio = <100>;
+	status = "okay";
+};
+
+&bus_noc {
+	operating-points-v2 = <&bus_noc_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys_apb {
+	operating-points-v2 = <&bus_fsys_apb_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys2 {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mfc {
+	operating-points-v2 = <&bus_mfc_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gen {
+	operating-points-v2 = <&bus_gen_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_peri {
+	operating-points-v2 = <&bus_peri_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d {
+	operating-points-v2 = <&bus_g2d_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d_acp {
+	operating-points-v2 = <&bus_g2d_acp_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	operating-points-v2 = <&bus_jpeg_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg_apb {
+	operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1_fimd {
+	operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1 {
+	operating-points-v2 = <&bus_disp1_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gscl_scaler {
+	operating-points-v2 = <&bus_gscl_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mscl {
+	operating-points-v2 = <&bus_mscl_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&dmc {
+	devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+			<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+	device-handle = <&samsung_K3QF2F20DB>;
+	operating-points-v2 = <&dmc_opp_table>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+		samsung,s2mps11-acokb-ground;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				/* Unused */
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				/* Unused */
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				/* Unused */
+				regulator-name = "vdd_ldo16";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_ldo17";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_emmc_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				/* Unused */
+				regulator-name = "vdd_ldo20";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* Unused */
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo22_reg: LDO22 {
+				/* Unused */
+				regulator-name = "vdd_ldo22";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				/* Unused */
+				regulator-name = "vdd_ldo24";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				/* Used on XU3, XU3-Lite and XU4 */
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				/* Used on XU3 */
+				regulator-name = "vdd_ldo28";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo30_reg: LDO30 {
+				/* Unused */
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/* Unused */
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo32_reg: LDO32 {
+				/* Unused */
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo33_reg: LDO33 {
+				/* Unused */
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo34_reg: LDO34 {
+				/* Unused */
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo35_reg: LDO35 {
+				/* Unused */
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "vdd_ldo36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "vdd_ldo37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/* Unused */
+				regulator-name = "vdd_ldo38";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1.35v_ldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_2.0v_ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2.8v_ldo";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_vmem";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&nocp_mem0_0 {
+	status = "okay";
+};
+
+&nocp_mem0_1 {
+	status = "okay";
+};
+
+&nocp_mem1_0 {
+	status = "okay";
+};
+
+&nocp_mem1_1 {
+	status = "okay";
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&ppmu_dmc0_0 {
+	status = "okay";
+};
+
+&ppmu_dmc0_1 {
+	status = "okay";
+};
+
+&ppmu_dmc1_0 {
+	status = "okay";
+};
+
+&ppmu_dmc1_1 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+/* usbdrd_dwc3_1 mode customized in each board */
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
new file mode 100644
index 000000000..a1871d4a0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid HC1 board device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5422-odroid-core.dtsi"
+
+/ {
+	model = "Hardkernel Odroid HC1";
+	compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			trips {
+				cpu0_alert0: cpu-alert-0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert1: cpu-alert-1 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * When reaching cpu0_alert0, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1600 MHz and 1100 MHz.
+				 */
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				/*
+				 * When reaching cpu0_alert1, reduce CPU
+				 * further, down to 600 MHz (12 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			trips {
+				cpu1_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu1_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu1_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			trips {
+				cpu2_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu2_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu2_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			trips {
+				cpu3_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu3_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu3_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
+	};
+
+};
+
+&pwm {
+	/*
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000..b5ec4f47e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3 audio subsystem device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/sound/samsung-i2s.h>
+
+/ {
+	sound: sound {
+		compatible = "samsung,odroid-xu3-audio";
+		model = "Odroid-XU3";
+
+		samsung,audio-widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		samsung,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN12", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR",
+			"I2S Playback", "Mixer DAI TX",
+			"HiFi Playback", "Mixer DAI TX",
+			"Mixer DAI RX", "HiFi Capture";
+
+		cpu {
+			sound-dai = <&i2s0 0>, <&i2s0 1>;
+		};
+		codec {
+			sound-dai = <&hdmi>, <&max98090>;
+		};
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_EPLL>,
+			<&clock CLK_MOUT_MAU_EPLL>,
+			<&clock CLK_MOUT_USER_MAU_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&i2s0 CLK_I2S_RCLK_SRC>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			<&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock CLK_MOUT_EPLL>,
+			<&clock CLK_MOUT_MAU_EPLL>,
+			<&clock CLK_MAU_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+
+	assigned-clock-rates = <0>,
+			<0>,
+			<0>,
+			<0>,
+			<0>,
+			<0>,
+			<196608001>,
+			<(196608002 / 2)>,
+			<196608000>;
+
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
new file mode 100644
index 000000000..099ed4384
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *                    Anand Moon <linux.amoon@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "exynos5422-odroid-core.dtsi"
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
+
+		power_key {
+			/*
+			 * The power button (SW2) is connected to the PWRON
+			 * pin (active high) of the S2MPS11 PMIC, which acts
+			 * as a 16ms debouce filter and signal inverter with
+			 * output on ONOB pin (active low). ONOB PMIC pin is
+			 * then connected to XEINT3 SoC pin.
+			 */
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <0>;
+			wakeup-source;
+		};
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu0_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+				/*
+				 * Exynos542x supports only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu0_alert2
+				 */
+				cpu0_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu0_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu0_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				/*
+				 * When reaching cpu0_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * (usually) be: 1800 MHz and 1200 MHz.
+				 */
+				map3 {
+					trip = <&cpu0_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				/*
+				 * When reaching cpu0_alert4, reduce CPU
+				 * further, down to 600 MHz (14 steps for big,
+				 * 8 steps for LITTLE).
+				 */
+				cpu0_cooling_map4: map4 {
+					trip = <&cpu0_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu1_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu1_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu1_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu1_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu1_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu1_cooling_map4: map4 {
+					trip = <&cpu1_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu2_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu2_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu2_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu2_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu2_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu2_cooling_map4: map4 {
+					trip = <&cpu2_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu3_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu3_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu3_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu3_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu3_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu3_cooling_map4: map4 {
+					trip = <&cpu3_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
+	};
+};
+
+&buck10_reg {
+	/* Supplies vmmc-supply of mmc_0 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&hdmi {
+	status = "okay";
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+};
+
+&hdmicec {
+	status = "okay";
+	needs-hpd;
+};
+
+&i2c_2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	/* used by HDMI DDC */
+	status = "okay";
+};
+
+&ldo26_reg {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	max-frequency = <200000000>;
+	vmmc-supply = <&ldo18_reg>;
+	vqmmc-supply = <&ldo3_reg>;
+};
+
+&pinctrl_0 {
+	power_key: power-key {
+		samsung,pins = "gpx0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
new file mode 100644
index 000000000..98feecad5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3-Lite board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU3 Lite";
+	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+};
+
+&arm_a7_pmu {
+	status = "disabled";
+};
+
+&arm_a15_pmu {
+	status = "disabled";
+};
+
+&chipid {
+	samsung,asv-bin = <2>;
+};
+
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+	/delete-node/opp-2000000000;
+	/delete-node/opp-1900000000;
+};
+
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu1_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu2_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu3_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
new file mode 100644
index 000000000..db0bc17a6
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU3";
+	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+};
+
+&i2c_0 {
+	status = "okay";
+
+	/* A15 cluster: VDD_ARM */
+	ina231@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* memory: VDD_MEM */
+	ina231@41 {
+		compatible = "ti,ina231";
+		reg = <0x41>;
+		shunt-resistor = <10000>;
+	};
+
+	/* GPU: VDD_G3D */
+	ina231@44 {
+		compatible = "ti,ina231";
+		reg = <0x44>;
+		shunt-resistor = <10000>;
+	};
+
+	/* A7 cluster: VDD_KFC */
+	ina231@45 {
+		compatible = "ti,ina231";
+		reg = <0x45>;
+		shunt-resistor = <10000>;
+	};
+};
+
+&ldo28_reg {
+	regulator-name = "dp_p3v3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000..4ef0dbc84
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU4";
+	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound: sound {
+		compatible = "samsung,odroid-xu3-audio";
+		model = "Odroid-XU4";
+
+		samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
+
+		cpu {
+			sound-dai = <&i2s0 0>, <&i2s0 1>;
+		};
+
+		codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_EPLL>,
+			  <&clock CLK_MOUT_MAU_EPLL>,
+			  <&clock CLK_MOUT_USER_MAU_EPLL>,
+			  <&clock_audss EXYNOS_MOUT_AUDSS>,
+			  <&clock_audss EXYNOS_MOUT_I2S>,
+			  <&i2s0 CLK_I2S_RCLK_SRC>,
+			  <&clock_audss EXYNOS_DOUT_SRP>,
+			  <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			  <&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_MOUT_EPLL>,
+				 <&clock CLK_MOUT_MAU_EPLL>,
+				 <&clock CLK_MAU_EPLL>,
+				 <&clock_audss EXYNOS_MOUT_AUDSS>,
+				 <&clock_audss EXYNOS_SCLK_I2S>;
+
+	assigned-clock-rates = <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <196608001>,
+			       <(196608002 / 2)>,
+			       <196608000>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm0_out &pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>, <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000..16e1087ec
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
new file mode 100644
index 000000000..8aa5117e5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ */
+
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
+	arm_a7_pmu: arm-a7-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	arm_a15_pmu: arm-a15-pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>,
+			     <7 0>,
+			     <16 6>,
+			     <19 2>;
+		status = "disabled";
+	};
+
+	timer: timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+	};
+
+	soc: soc {
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: timer@101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0xb00>;
+			interrupts-extended = <&combiner 23 3>,
+					      <&combiner 23 4>,
+					      <&combiner 25 2>,
+					      <&combiner 25 3>,
+					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos5420-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		adc: adc@12d10000 {
+			compatible = "samsung,exynos-adc-v2";
+			reg = <0x12d10000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3@12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3@12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2_phy 1>;
+			phy-names = "host";
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2_phy 1>;
+			phy-names = "host";
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
new file mode 100644
index 000000000..60ab0effe
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -0,0 +1,1100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Peach Pi Rev 10+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5800.dtsi"
+#include "exynos5420-cpus.dtsi"
+
+/ {
+	model = "Google Peach Pi Rev 10+";
+
+	compatible = "google,pi-rev16",
+		"google,pi-rev15", "google,pi-rev14",
+		"google,pi-rev13", "google,pi-rev12",
+		"google,pi-rev11", "google,pi-rev10",
+		"google,pi", "google,peach", "samsung,exynos5800",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = &i2c_tunnel;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&tps65090_fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98091";
+
+		samsung,model = "Peach-Pi-I2S-MAX98091";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98091>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98091>, <&hdmi>;
+		};
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	panel: panel {
+		compatible = "auo,b133htn01";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
+	};
+
+	mmc1_pwrseq: mmc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77802 MAX77802_CLK_32K_CP>;
+		clock-names = "ext_clock";
+	};
+};
+
+&adc {
+	status = "okay";
+	vdd-supply = <&ldo9_reg>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
+};
+
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards.  Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max77802: max77802-pmic@9 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&gpx3>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+		wakeup-source;
+		reg = <0x9>;
+		#clock-cells = <1>;
+
+		inb1-supply = <&tps65090_dcdc2>;
+		inb2-supply = <&tps65090_dcdc1>;
+		inb3-supply = <&tps65090_dcdc2>;
+		inb4-supply = <&tps65090_dcdc2>;
+		inb5-supply = <&tps65090_dcdc1>;
+		inb6-supply = <&tps65090_dcdc2>;
+		inb7-supply = <&tps65090_dcdc1>;
+		inb8-supply = <&tps65090_dcdc1>;
+		inb9-supply = <&tps65090_dcdc1>;
+		inb10-supply = <&tps65090_dcdc1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&tps65090_dcdc2>;
+		inl7-supply = <&buck9_reg>;
+		inl9-supply = <&tps65090_dcdc2>;
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_1v2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1v35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2v";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_1v2_2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_1v8_3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			vqmmc_sdcard: ldo4_reg: LDO4 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_1v8_5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_1v8_6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_1v8_7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo_19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "ldo_20";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "ldo_21";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "ldo_23";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			ldo24_reg: LDO24 {
+				regulator-name = "ldo_24";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "ldo_25";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "ldo_26";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo_27";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo_28";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo_29";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "ldo_32";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo_33";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo_34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo_35";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max98091: codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98091_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29018";
+		reg = <0x44>;
+		vcc-supply = <&tps65090_fet5>;
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+	/* Atmel mXT540S */
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED	/* GPIO 0 */
+				     KEY_RESERVED	/* GPIO 1 */
+				     BTN_LEFT		/* GPIO 2 */
+				     KEY_RESERVED>;	/* GPIO 3 */
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	clock-frequency = <800000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+	bus-width = <8>;
+};
+
+/* WiFi SDIO module */
+&mmc_1 {
+	status = "okay";
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+		    <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc1_pwrseq>;
+	vqmmc-supply = <&buck10_reg>;
+};
+
+/* uSD card */
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	max98091_irq: max98091-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpy7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	/* Adjust WiFi drive strengths lower for EMI */
+	sd1_clk: sd1-clk {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_2 {
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpj4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpj4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_selb: pmic-selb {
+		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
+			       "gph0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&tps65090_dcdc1>;
+				infet3-supply = <&tps65090_dcdc2>;
+				infet4-supply = <&tps65090_dcdc2>;
+				infet5-supply = <&tps65090_dcdc2>;
+				infet6-supply = <&tps65090_dcdc2>;
+				infet7-supply = <&tps65090_dcdc1>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
+#include "cros-adc-thermistors.dtsi"
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
new file mode 100644
index 000000000..526729dad
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5800 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung Exynos5800 SoC device nodes are listed in this file.
+ * Exynos5800 based board files can include this file and provide
+ * values for board specfic bindings.
+ */
+
+#include "exynos5420.dtsi"
+
+/ {
+	compatible = "samsung,exynos5800", "samsung,exynos5";
+};
+
+&clock {
+	compatible = "samsung,exynos5800-clock", "syscon";
+};
+
+&cluster_a15_opp_table {
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <1312500 1312500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1900000000 {
+		opp-hz = /bits/ 64 <1900000000>;
+		opp-microvolt = <1262500 1262500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1237500 1237500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1700000000 {
+		opp-microvolt = <1250000 1250000 1500000>;
+	};
+	opp-1600000000 {
+		opp-microvolt = <1250000 1250000 1500000>;
+	};
+	opp-1500000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1400000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1300000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-1100000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-1000000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-900000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-800000000 {
+		opp-microvolt = <900000 900000 1500000>;
+	};
+	opp-700000000 {
+		opp-microvolt = <900000 900000 1500000>;
+	};
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&cluster_a7_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1275000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1300000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1100000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1000000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-900000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-800000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-700000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp-600000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp-500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&mfc {
+	compatible = "samsung,mfc-v8";
+};
+
+&soc {
+	cam_pd: power-domain@10045100 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10045100 0x20>;
+		#power-domain-cells = <0>;
+		label = "CAM";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
new file mode 100644
index 000000000..87bb8b576
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "env";
+	};
+
+	fit@80000 {
+		reg = <0x80000 0x1b80000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition is used by several Facebook BMC platforms
+	 * as persistent data store.
+	 */
+	data0@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x2000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
new file mode 100644
index 000000000..dbba33e5a
--- /dev/null
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	clocks {
+		main_xtal {
+			clock-frequency = <6000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "boot";
+							reg = <0x0 0x7c0000>;
+						};
+
+						root@7c0000 {
+							label = "root";
+							reg = <0x7c0000 0x7840000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
new file mode 100644
index 000000000..cc39289e9
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -0,0 +1,511 @@
+/*
+ * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DIR-685 Xtreme N Storage Router";
+	compatible = "dlink,dir-685", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+		button-eject {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "unmount";
+			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vdisp: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display-power";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		/* Collides with LCD E */
+		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Collides with IDE pins, that's cool (we do not use them) */
+		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		panel: display@0 {
+			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+			reg = <0>;
+			/* 50 ns min period = 20 MHz */
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdisp>;
+			iovcc-supply = <&vdisp>;
+			vci-supply = <&vdisp>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wps {
+			label = "dir685:blue:WPS";
+			/* Collides with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		/*
+		 * These two LEDs are on the side of the device.
+		 * For electrical reasons, both LEDs cannot be active
+		 * at the same time so only blue or orange can be on at
+		 * one time. Enabling both makes the LED go dark.
+		 * The LEDs both sit inside the unmount button and the
+		 * label on the case says "unmount".
+		 */
+		led-blue-hd {
+			label = "dir685:blue:HD";
+			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-orange-hd {
+			label = "dir685:orange:HD";
+			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+	 * sensor. It is turned on when the temperature exceeds 46 degrees
+	 * and turned off when the temperatures goes below 41 degrees
+	 * (celsius).
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		/* Collides with IDE */
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The touchpad input is connected to a GPIO bit-banged
+	 * I2C bus.
+	 */
+	gpio-i2c {
+		compatible = "i2c-gpio";
+		/* Collides with ICE */
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkeys@26 {
+			compatible = "dlink,dir685-touchkeys";
+			reg = <0x26>;
+			interrupt-parent = <&gpio0>;
+			/* Collides with NAND flash */
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
+	switch {
+		compatible = "realtek,rtl8366rb";
+		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+
+		switch_intc: interrupt-controller {
+			/* GPIO 15 provides the interrupt */
+			interrupt-parent = <&gpio0>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+				phy-handle = <&phy0>;
+			};
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&phy1>;
+			};
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&phy2>;
+			};
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&phy3>;
+			};
+			port@4 {
+				reg = <4>;
+				label = "wan";
+				phy-handle = <&phy4>;
+			};
+			rtl8366rb_cpu_port: port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: phy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <0>;
+			};
+			phy1: phy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <1>;
+			};
+			phy2: phy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <2>;
+			};
+			phy3: phy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <3>;
+			};
+			phy4: phy@4 {
+				reg = <4>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <12>;
+			};
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * Flash access collides with the Chip Enable signal for
+			 * the display panel, that reuse the parallel flash Chip
+			 * Select 1 (CS1). We switch the pin control state so we
+			 * enable these pins for flash access only when we need
+			 * then, and when disabled they can be used for GPIO which
+			 * is what the display panel needs.
+			 */
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+
+			/* 32MB of flash */
+			reg = <0x30000000 0x02000000>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * This "RedBoot" is the Storlink derivative.
+				 */
+				partition@0 {
+					label = "RedBoot";
+					reg = <0x00000000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This firmware image contains the kernel catenated
+				 * with the squashfs root filesystem. For some reason
+				 * this is called "upgrade" on the vendor system.
+				 */
+				partition@40000 {
+					label = "upgrade";
+					reg = <0x00040000 0x01f40000>;
+					read-only;
+				};
+				/* RGDB, Residental Gateway Database? */
+				partition@1f80000 {
+					label = "rgdb";
+					reg = <0x01f80000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This partition contains MAC addresses for WAN,
+				 * WLAN and LAN, and the country code (for wireless
+				 * I guess).
+				 */
+				partition@1fc0000 {
+					label = "nvram";
+					reg = <0x01fc0000 0x00020000>;
+					read-only;
+				};
+				partition@1fe0000 {
+					label = "LangPack";
+					reg = <0x01fe0000 0x00020000>;
+					read-only;
+				};
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 5, 6 used by TK I2C
+				 * gpio0bgrp cover line 7 used by WPS LED
+				 * gpio0cgrp cover line 8, 13 used by keys
+				 *           and 11, 12 used by the HD LEDs
+				 *           and line 14, 15 used by RTL8366
+				 *           RESET and phy ready
+				 * gpio0egrp cover line 16 used by VDISP
+				 * gpio0fgrp cover line 17 used by TK IRQ
+				 * gpio0ggrp cover line 20 used by panel CS
+				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0cgrp",
+						"gpio0egrp",
+						"gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio1bgrp cover line 5,8,7 used by panel SPI
+				 * also line 6 used by the fan
+				 *
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1bgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
+						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
+						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
+						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
+						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf1 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		display-controller@6a000000 {
+			status = "okay";
+
+			port@0 {
+				reg = <0>;
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
new file mode 100644
index 000000000..b8acc6eaa
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
+	compatible = "dlink,dns-313", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dns313:blue:power";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-disk-blue {
+			label = "dns313:blue:disk";
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-disk-green {
+			label = "dns313:green:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-disk-red {
+			label = "dns313:red:disk";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+			<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
+		#cooling-cells = <2>;
+	};
+
+
+	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+	gpio-i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		g751: temperature-sensor@48 {
+			compatible = "gmt,g751";
+			reg = <0x48>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&g751>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				chassis_alert0: chassis-alert0 {
+					/* At 43 degrees turn on low speed */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_alert1: chassis-alert1 {
+					/* At 47 degrees turn on high speed */
+					temperature = <47000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&chassis_alert0>;
+					cooling-device = <&fan0 1 1>;
+				};
+				map1 {
+					trip = <&chassis_alert1>;
+					cooling-device = <&fan0 2 2>;
+				};
+			};
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Realtek RTL8211B Gigabit ethernet transceiver */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * This is a Eon EN29LV400AB 512 KiB flash with
+			 * three partitions.
+			 */
+			compatible = "cortina,gemini-flash", "jedec-flash";
+			status = "okay";
+			reg = <0x30000000 0x00080000>;
+
+			/*
+			 * This "RedBoot" is the Storlink derivative.
+			 */
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MTD1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "MTD2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups =
+						/* Used by LEDs conflicts ICE */
+						"gpio0bgrp",
+						/* Used by ? conflicts ICE */
+						"gpio0cgrp",
+						/*
+						 * Used by fan & G751, conflicts LPC,
+						 * UART modem lines, SSP
+						 */
+						"gpio0egrp",
+						/* Used by G751 */
+						"gpio0fgrp",
+						/* Used by MDIO */
+						"gpio0igrp";
+					};
+				};
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						/* Used by "reset" button */
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/*
+					 * In the vendor Linux tree, these values are set for the C3
+					 * version of the SL3512 ASIC with the comment "benson suggest"
+					 */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <10>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf3 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					conf6 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf7 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			/* The ROM uses this muxmode */
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
new file mode 100644
index 000000000..6544c7303
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Raidsonic NAS IB-4220-B";
+	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Backup button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+		button-restart {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "Softreset button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-orange-hdd {
+			label = "nas4220b:orange:hdd";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-green-os {
+			label = "nas4220b:green:os";
+			/* Conflict with TVC */
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x7f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT, pins on SL3516 */
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
new file mode 100644
index 000000000..0ebda4efd
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Teltonika RUT1xx
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Teltonika RUT1xx";
+	compatible = "teltonika,rut1xx", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Reset to defaults";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-gsm {
+			/* FIXME: add the LED color */
+			label = "rut1xx::gsm";
+			/* Conflict with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-power {
+			/* FIXME: add the LED color */
+			label = "rut1xx::power";
+			/* Conflict with NAND CE0 */
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+			/* TODO: add flash partitions here */
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 7 used by GSM LED
+				 * gpio0fgrp cover line 17 used by power LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0fgrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
new file mode 100644
index 000000000..a0916d3c1
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Storm Semiconductor SL93512R_BRD
+ * Gemini reference design, also initially called
+ * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
+ * The series were later acquired by Cortina Systems.
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
+	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB Samsung K4H511638B */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_WPS_BUTTON>;
+			label = "WPS";
+			/* Conflicts with TVC and extended flash */
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-setup {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-harddisk {
+			label = "sq201:green:harddisk";
+			/* Conflict with LCD (no problem) */
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+		led-green-wireless {
+			label = "sq201:green:wireless";
+			/* Conflict with NAND flash CE0 (no problem) */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7385";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0, used by WPS button
+				 * gpio0fgrp cover line 16 used by HD LED
+				 * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
+				 * reset button OR USB ID select on 17 and USB VBUS select
+				 * on 18. (Confusing.)
+				 * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0fgrp",
+						"gpio0ggrp",
+						"gpio0igrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover lines used by SPI for
+				 * the Vitesse chip (28-31)
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Control pad skew comes from sl_switch.c in the vendor code */
+					conf0 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf1 {
+						pins = "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf3 {
+						pins = "U11 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						pins = "P8 GMAC0 TXEN";
+						skew-delay = <7>; /* 5 at another place? */
+					};
+					conf6 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf7 {
+						pins = "R8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Appears in sl351x_gmac.c in the vendor code */
+					conf9 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+				};
+			};
+		};
+
+		/* Both interfaces brought out on SATA connectors */
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
new file mode 100644
index 000000000..0c6e6d35b
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for ITian Square One SQ201 NAS
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ITian Square One SQ201";
+	compatible = "itian,sq201", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-info {
+			label = "sq201:green:info";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-green-usb {
+			label = "sq201:green:usb";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "usb-host";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7395";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0fgrp cover line 18 used by reset button
+				 * gpio0ggrp cover line 20 used by info LED
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
+				 * gpio0kgrp cover line 31 used by USB LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio0dgrp cover lines used by the SPI
+				 * to the Vitesse G5x chip.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Settings come from memory dump in PLATO */
+					conf0 {
+						pins = "V8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf4 {
+						pins = "T10 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf5 {
+						pins = "Y11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf6 {
+						pins = "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf7 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
+					conf9 {
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
new file mode 100644
index 000000000..5602ba8f3
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiliboard,wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00020000>;
+				read-only;
+			};
+			partition@20000 {
+				label = "kernel";
+				reg = <0x00020000 0x00100000>;
+			};
+			partition@120000 {
+				label = "rootfs";
+				reg = <0x00120000 0x006a0000>;
+			};
+			partition@7c0000 {
+				label = "VCTL";
+				reg = <0x007c0000 0x00010000>;
+				read-only;
+			};
+			partition@7d0000 {
+				label = "cfg";
+				reg = <0x007d0000 0x00010000>;
+				read-only;
+			};
+			partition@7e0000 {
+				label = "FIS";
+				reg = <0x007e0000 0x00010000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
new file mode 100644
index 000000000..a4a260c36
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiliboard,wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00020000>;
+				read-only;
+			};
+			partition@20000 {
+				label = "kernel";
+				reg = <0x00020000 0x00100000>;
+			};
+			partition@120000 {
+				label = "rootfs";
+				reg = <0x00120000 0x006a0000>;
+			};
+			partition@7c0000 {
+				label = "VCTL";
+				reg = <0x007c0000 0x00010000>;
+				read-only;
+			};
+			partition@7d0000 {
+				label = "cfg";
+				reg = <0x007d0000 0x00010000>;
+				read-only;
+			};
+			partition@7e0000 {
+				label = "FIS";
+				reg = <0x007e0000 0x00010000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
new file mode 100644
index 000000000..07448c03d
--- /dev/null
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cortina systems Gemini SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/cortina,gemini-clock.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		flash@30000000 {
+			compatible = "cortina,gemini-flash", "cfi-flash";
+			syscon = <&syscon>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pflash_default_pins>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon",
+				     "syscon", "simple-mfd";
+			reg = <0x40000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&syscon>;
+				/* GLOBAL_RESET register */
+				offset = <0x0c>;
+				/* RESET_GLOBAL | RESET_CPU1 */
+				mask = <0xC0000000>;
+			};
+
+			pinctrl {
+				compatible = "cortina,gemini-pinctrl";
+				regmap = <&syscon>;
+				/* Hog the DRAM pins */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+					    <&vcontrol_default_pins>;
+
+				dram_default_pins: pinctrl-dram {
+					mux {
+						function = "dram";
+						groups = "dramgrp";
+					};
+				};
+				rtc_default_pins: pinctrl-rtc {
+					mux {
+						function = "rtc";
+						groups = "rtcgrp";
+					};
+				};
+				power_default_pins: pinctrl-power {
+					mux {
+						function = "power";
+						groups = "powergrp";
+					};
+				};
+				cir_default_pins: pinctrl-cir {
+					mux {
+						function = "cir";
+						groups = "cirgrp";
+					};
+				};
+				system_default_pins: pinctrl-system {
+					mux {
+						function = "system";
+						groups = "systemgrp";
+					};
+				};
+				vcontrol_default_pins: pinctrl-vcontrol {
+					mux {
+						function = "vcontrol";
+						groups = "vcontrolgrp";
+					};
+				};
+				ice_default_pins: pinctrl-ice {
+					mux {
+						function = "ice";
+						groups = "icegrp";
+					};
+				};
+				uart_default_pins: pinctrl-uart {
+					mux {
+						function = "uart";
+						groups = "uartrxtxgrp";
+					};
+				};
+				pflash_default_pins: pinctrl-pflash {
+					mux {
+						function = "pflash";
+						groups = "pflashgrp";
+					};
+				};
+				usb_default_pins: pinctrl-usb {
+					mux {
+						function = "usb";
+						groups = "usbgrp";
+					};
+				};
+				gmii_default_pins: pinctrl-gmii {
+					/*
+					 * Only activate GMAC0 by default since
+					 * GMAC1 will overlap with 8 GPIO lines
+					 * gpio2a, gpio2b. Overlay groups with
+					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+					 * both ethernet interfaces.
+					 */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+				};
+				pci_default_pins: pinctrl-pci {
+					mux {
+						function = "pci";
+						groups = "pcigrp";
+					};
+				};
+				sata_default_pins: pinctrl-sata {
+					mux {
+						function = "sata";
+						groups = "satagrp";
+					};
+				};
+				/* Activate both groups of pins for this state */
+				sata_and_ide_pins: pinctrl-sata-ide {
+					mux0 {
+						function = "sata";
+						groups = "satagrp";
+					};
+					mux1 {
+						function = "ide";
+						groups = "idegrp";
+					};
+				};
+				tvc_default_pins: pinctrl-tvc {
+					mux {
+						function = "tvc";
+						groups = "tvcgrp";
+					};
+				};
+			};
+		};
+
+		watchdog@41000000 {
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
+			reg = <0x41000000 0x1000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_WDOG>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			resets = <&syscon GEMINI_RESET_UART>;
+			clocks = <&syscon GEMINI_CLK_UART>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart_default_pins>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "faraday,fttmr010";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			resets = <&syscon GEMINI_RESET_TIMER>;
+			/* APB clock or RTC clock */
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			syscon = <&syscon>;
+		};
+
+		rtc@45000000 {
+			compatible = "cortina,gemini-rtc";
+			reg = <0x45000000 0x100>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_RTC>;
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rtc_default_pins>;
+		};
+
+		sata: sata@46000000 {
+			compatible = "cortina,gemini-sata-bridge";
+			reg = <0x46000000 0x100>;
+			resets = <&syscon GEMINI_RESET_SATA0>,
+				 <&syscon GEMINI_RESET_SATA1>;
+			reset-names = "sata0", "sata1";
+			clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
+				 <&syscon GEMINI_CLK_GATE_SATA1>;
+			clock-names = "SATA0_PCLK", "SATA1_PCLK";
+			/*
+			 * This defines the special "ide" state that needs
+			 * to be explicitly enabled to enable the IDE pins,
+			 * as these pins are normally used for other things.
+			 */
+			pinctrl-names = "default", "ide";
+			pinctrl-0 = <&sata_default_pins>;
+			pinctrl-1 = <&sata_and_ide_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "faraday,ftintc010";
+			reg = <0x48000000 0x1000>;
+			resets = <&syscon GEMINI_RESET_INTCON0>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		power-controller@4b000000 {
+			compatible = "cortina,gemini-power-controller";
+			reg = <0x4b000000 0x100>;
+			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_default_pins>;
+		};
+
+		gpio0: gpio@4d000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4d000000 0x100>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO0>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@4e000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4e000000 0x100>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO1>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4f000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4f000000 0x100>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO2>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pci@50000000 {
+			compatible = "cortina,gemini-pci", "faraday,ftpci100";
+			/*
+			 * The first 256 bytes in the IO range is actually used
+			 * to configure the host bridge.
+			 */
+			reg = <0x50000000 0x100>;
+			resets = <&syscon GEMINI_RESET_PCI>;
+			clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
+			clock-names = "PCLK", "PCICLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			status = "disabled";
+
+			bus-range = <0x00 0xff>;
+			/* PCI ranges mappings */
+			ranges =
+			/* 1MiB I/O space 0x50000000-0x500fffff */
+			<0x01000000 0 0          0x50000000 0 0x00100000>,
+			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+			/* DMA ranges */
+			dma-ranges =
+			/* 128MiB at 0x00000000-0x07ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/*
+			 * This PCI host bridge variant has a cascaded interrupt
+			 * controller embedded in the host bridge.
+			 */
+			pci_intc: interrupt-controller {
+				interrupt-parent = <&intcon>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		ethernet@60000000 {
+			compatible = "cortina,gemini-ethernet";
+			reg = <0x60000000 0x4000>, /* Global registers, queue */
+			      <0x60004000 0x2000>, /* V-bit */
+			      <0x60006000 0x2000>; /* A-bit */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmii_default_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gmac0: ethernet-port@0 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+				      <0x6000a000 0x2000>; /* Port 0 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC0>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+				clock-names = "PCLK";
+			};
+
+			gmac1: ethernet-port@1 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+				      <0x6000e000 0x2000>; /* Port 1 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC1>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+				clock-names = "PCLK";
+			};
+		};
+
+		ide@63000000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63000000 0x1000>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ide@63400000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63400000 0x1000>;
+			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dma-controller@67000000 {
+			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+			/* Faraday Technology FTDMAC020 variant */
+			arm,primecell-periphid = <0x0003b080>;
+			reg = <0x67000000 0x1000>;
+			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_DMAC>;
+			clocks = <&syscon GEMINI_CLK_AHB>;
+			clock-names = "apb_pclk";
+			/* Bus interface AHB1 (AHB0) is totally tilted */
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+
+		display-controller@6a000000 {
+			compatible = "cortina,gemini-tvc", "faraday,tve200";
+			reg = <0x6a000000 0x1000>;
+			interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_TVC>;
+			clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+				 <&syscon GEMINI_CLK_TVC>;
+			clock-names = "PCLK", "TVE";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tvc_default_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg210";
+			reg = <0x68000000 0x1000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB0>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+			clock-names = "PCLK";
+			/*
+			 * This will claim pins for USB0 and USB1 at the same
+			 * time as they are using some common pins. If you for
+			 * some reason have a system using USB1 at 96000000 but
+			 * NOT using USB0 at 68000000 you wll have to add the
+			 * usb_default_pins to the USB controller at 96000000
+			 * in your .dts for the board.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg210";
+			reg = <0x69000000 0x1000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB1>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+			clock-names = "PCLK";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
new file mode 100644
index 000000000..8d7757980
--- /dev/null
+++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach audiocamera shield expansion board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	/* On-board camera clock. */
+	camera_clk: camera_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&pinctrl {
+	i2c1_pins: i2c1 {
+		/* P1_2 as SCL; P1_3 as SDA */
+		pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>;
+	};
+
+	vio_pins: vio {
+		/* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */
+		pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */
+			 <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */
+			 <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */
+			 <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */
+			 <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */
+			 <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */
+			 <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */
+			 <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */
+			 <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */
+			 <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */
+			 <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	camera@48 {
+		compatible = "aptina,mt9v111";
+		reg = <0x48>;
+
+		clocks = <&camera_clk>;
+
+		port {
+			mt9v111_out: endpoint {
+				remote-endpoint = <&ceu_in>;
+			};
+		};
+	};
+};
+
+&ceu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vio_pins>;
+
+	status = "okay";
+
+	port {
+		ceu_in: endpoint {
+			remote-endpoint = <&mt9v111_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 000000000..64f8ed126
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 000000000..410409a0e
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
new file mode 100644
index 000000000..8c703c3f2
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012-2013 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "hi3620.dtsi"
+
+/ {
+	model = "Hisilicon Hi4511 Development Board";
+	compatible = "hisilicon,hi3620-hi4511";
+
+	chosen {
+		bootargs = "root=/dev/ram0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	amba {
+		dual_timer0: dual_timer@800000 {
+			status = "ok";
+		};
+
+		uart0: uart@b00000 {	/* console */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+			status = "ok";
+		};
+
+		uart1: uart@b01000 { /* modem */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+			status = "ok";
+		};
+
+		uart2: uart@b02000 { /* audience */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+			status = "ok";
+		};
+
+		uart3: uart@b03000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+			status = "ok";
+		};
+
+		uart4: uart@b04000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+			status = "ok";
+		};
+
+		pmx0: pinmux@803000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&board_pmx_pins>;
+
+			board_pmx_pins: board_pmx_pins {
+				pinctrl-single,pins = <
+					0x008 0x0	/* GPIO -- eFUSE_DOUT */
+					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
+				>;
+			};
+			uart0_pmx_func: uart0_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x0
+					0x0f4 0x0	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart0_pmx_idle: uart0_pmx_idle {
+				pinctrl-single,pins = <
+					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
+					0x0f4 0x1	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart1_pmx_func: uart1_pmx_func {
+				pinctrl-single,pins = <
+					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
+					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
+				>;
+			};
+			uart1_pmx_idle: uart1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0f8 0x1	/* GPIO (IOMG61) */
+					0x0fc 0x1	/* GPIO (IOMG62) */
+				>;
+			};
+			uart2_pmx_func: uart2_pmx_func {
+				pinctrl-single,pins = <
+					0x104 0x2	/* UART2_RXD (IOMG96) */
+					0x108 0x2	/* UART2_TXD (IOMG64) */
+				>;
+			};
+			uart2_pmx_idle: uart2_pmx_idle {
+				pinctrl-single,pins = <
+					0x104 0x1	/* GPIO (IOMG96) */
+					0x108 0x1	/* GPIO (IOMG64) */
+				>;
+			};
+			uart3_pmx_func: uart3_pmx_func {
+				pinctrl-single,pins = <
+					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
+					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
+				>;
+			};
+			uart3_pmx_idle: uart3_pmx_idle {
+				pinctrl-single,pins = <
+					0x160 0x1	/* GPIO (IOMG85) */
+					0x164 0x1	/* GPIO (IOMG86) */
+				>;
+			};
+			uart4_pmx_func: uart4_pmx_func {
+				pinctrl-single,pins = <
+					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
+					0x16c 0x0	/* UART4_RXD (IOMG88) */
+					0x170 0x0	/* UART4_TXD (IOMG93) */
+				>;
+			};
+			uart4_pmx_idle: uart4_pmx_idle {
+				pinctrl-single,pins = <
+					0x168 0x1	/* GPIO (IOMG87) */
+					0x16c 0x1	/* GPIO (IOMG88) */
+					0x170 0x1	/* GPIO (IOMG93) */
+				>;
+			};
+			i2c0_pmx_func: i2c0_pmx_func {
+				pinctrl-single,pins = <
+					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
+				>;
+			};
+			i2c0_pmx_idle: i2c0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b4 0x1	/* GPIO (IOMG45) */
+				>;
+			};
+			i2c1_pmx_func: i2c1_pmx_func {
+				pinctrl-single,pins = <
+					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
+				>;
+			};
+			i2c1_pmx_idle: i2c1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b8 0x1	/* GPIO (IOMG46) */
+				>;
+			};
+			i2c2_pmx_func: i2c2_pmx_func {
+				pinctrl-single,pins = <
+					0x068 0x0	/* I2C2_SCL (IOMG26) */
+					0x06c 0x0	/* I2C2_SDA (IOMG27) */
+				>;
+			};
+			i2c2_pmx_idle: i2c2_pmx_idle {
+				pinctrl-single,pins = <
+					0x068 0x1	/* GPIO (IOMG26) */
+					0x06c 0x1	/* GPIO (IOMG27) */
+				>;
+			};
+			i2c3_pmx_func: i2c3_pmx_func {
+				pinctrl-single,pins = <
+					0x050 0x2	/* I2C3_SCL (IOMG20) */
+					0x054 0x2	/* I2C3_SDA (IOMG21) */
+				>;
+			};
+			i2c3_pmx_idle: i2c3_pmx_idle {
+				pinctrl-single,pins = <
+					0x050 0x1	/* GPIO (IOMG20) */
+					0x054 0x1	/* GPIO (IOMG21) */
+				>;
+			};
+			spi0_pmx_func: spi0_pmx_func {
+				pinctrl-single,pins = <
+					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
+					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
+					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
+					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
+				>;
+			};
+			spi0_pmx_idle: spi0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0d4 0x1	/* GPIO (IOMG53) */
+					0x0d8 0x1	/* GPIO (IOMG54) */
+					0x0dc 0x1	/* GPIO (IOMG55) */
+					0x0e0 0x1	/* GPIO (IOMG56) */
+					0x0e4 0x1	/* GPIO (IOMG57) */
+				>;
+			};
+			spi1_pmx_func: spi1_pmx_func {
+				pinctrl-single,pins = <
+					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
+					0x0e8 0x0	/* SPI1_DO (IOMG58) */
+					0x0ec 0x0	/* SPI1_CS (IOMG95) */
+				>;
+			};
+			spi1_pmx_idle: spi1_pmx_idle {
+				pinctrl-single,pins = <
+					0x184 0x1	/* GPIO (IOMG98) */
+					0x0e8 0x1	/* GPIO (IOMG58) */
+					0x0ec 0x1	/* GPIO (IOMG95) */
+				>;
+			};
+			kpc_pmx_func: kpc_pmx_func {
+				pinctrl-single,pins = <
+					0x12c 0x0	/* KEY_IN0 (IOMG73) */
+					0x130 0x0	/* KEY_IN1 (IOMG74) */
+					0x134 0x0	/* KEY_IN2 (IOMG75) */
+					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
+					0x110 0x0	/* KEY_OUT1 (IOMG66) */
+					0x114 0x0	/* KEY_OUT2 (IOMG67) */
+				>;
+			};
+			kpc_pmx_idle: kpc_pmx_idle {
+				pinctrl-single,pins = <
+					0x12c 0x1	/* GPIO (IOMG73) */
+					0x130 0x1	/* GPIO (IOMG74) */
+					0x134 0x1	/* GPIO (IOMG75) */
+					0x10c 0x1	/* GPIO (IOMG65) */
+					0x110 0x1	/* GPIO (IOMG66) */
+					0x114 0x1	/* GPIO (IOMG67) */
+				>;
+			};
+			gpio_key_func: gpio_key_func {
+				pinctrl-single,pins = <
+					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
+					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
+				>;
+			};
+			emmc_pmx_func: emmc_pmx_func {
+				pinctrl-single,pins = <
+					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
+				>;
+			};
+			emmc_pmx_idle: emmc_pmx_idle {
+				pinctrl-single,pins = <
+					0x030 0x0	/* GPIO (IOMG12) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sd_pmx_func: sd_pmx_func {
+				pinctrl-single,pins = <
+					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
+				>;
+			};
+			sd_pmx_idle: sd_pmx_idle {
+				pinctrl-single,pins = <
+					0x0bc 0x1	/* GPIO (IOMG47) */
+					0x0c0 0x1	/* GPIO (IOMG48) */
+				>;
+			};
+			nand_pmx_func: nand_pmx_func {
+				pinctrl-single,pins = <
+					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+					0x010 0x0	/* NAND_CS1_N (IOMG4) */
+					0x014 0x0	/* NAND_CS2_N (IOMG5) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
+					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
+				>;
+			};
+			nand_pmx_idle: nand_pmx_idle {
+				pinctrl-single,pins = <
+					0x00c 0x1	/* GPIO (IOMG3) */
+					0x010 0x1	/* GPIO (IOMG4) */
+					0x014 0x1	/* GPIO (IOMG5) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x01c 0x1	/* GPIO (IOMG94) */
+					0x020 0x1	/* GPIO (IOMG7) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sdio_pmx_func: sdio_pmx_func {
+				pinctrl-single,pins = <
+					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+				>;
+			};
+			sdio_pmx_idle: sdio_pmx_idle {
+				pinctrl-single,pins = <
+					0x0c4 0x1	/* GPIO (IOMG49) */
+				>;
+			};
+			audio_out_pmx_func: audio_out_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
+				>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
+					&board_np_pins &board_ps_pins &kpc_cfg_func
+					&audio_out_cfg_func>;
+			board_pu_pins: board_pu_pins {
+				pinctrl-single,pins = <
+					0x014 0		/* GPIO_158 (IOCFG2) */
+					0x018 0		/* GPIO_159 (IOCFG3) */
+					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
+					0x020 0		/* BOOT_MODE1 (IOCFG5) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+			};
+			board_pd_pins: board_pd_pins {
+				pinctrl-single,pins = <
+					0x038 0		/* eFUSE_DOUT (IOCFG11) */
+					0x150 0		/* ISP_GPIO8 (IOCFG93) */
+					0x154 0		/* ISP_GPIO9 (IOCFG94) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_pd_ps_pins: board_pd_ps_pins {
+				pinctrl-single,pins = <
+					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
+					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			board_np_pins: board_np_pins {
+				pinctrl-single,pins = <
+					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_ps_pins: board_ps_pins {
+				pinctrl-single,pins = <
+					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
+					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
+				>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			uart0_cfg_func: uart0_cfg_func {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart0_cfg_idle: uart0_cfg_idle {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_func: uart1_cfg_func {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_idle: uart1_cfg_idle {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_func: uart2_cfg_func {
+				pinctrl-single,pins = <
+					0x220 0		/* UART2_CTS (IOCFG144) */
+					0x224 0		/* UART2_RTS (IOCFG145) */
+					0x228 0		/* UART2_RXD (IOCFG146) */
+					0x22c 0		/* UART2_TXD (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_idle: uart2_cfg_idle {
+				pinctrl-single,pins = <
+					0x220 0		/* GPIO (IOCFG144) */
+					0x224 0		/* GPIO (IOCFG145) */
+					0x228 0		/* GPIO (IOCFG146) */
+					0x22c 0		/* GPIO (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_func: uart3_cfg_func {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_idle: uart3_cfg_idle {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart4_cfg_func: uart4_cfg_func {
+				pinctrl-single,pins = <
+					0x2a4 0		/* UART4_CTS (IOCFG177) */
+					0x2a8 0		/* UART4_RTS (IOCFG178) */
+					0x2ac 0		/* UART4_RXD (IOCFG179) */
+					0x2b0 0		/* UART4_TXD (IOCFG180) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			i2c0_cfg_func: i2c0_cfg_func {
+				pinctrl-single,pins = <
+					0x17c 0		/* I2C0_SCL (IOCFG103) */
+					0x180 0		/* I2C0_SDA (IOCFG104) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c1_cfg_func: i2c1_cfg_func {
+				pinctrl-single,pins = <
+					0x184 0		/* I2C1_SCL (IOCFG105) */
+					0x188 0		/* I2C1_SDA (IOCFG106) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c2_cfg_func: i2c2_cfg_func {
+				pinctrl-single,pins = <
+					0x118 0		/* I2C2_SCL (IOCFG79) */
+					0x11c 0		/* I2C2_SDA (IOCFG80) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c3_cfg_func: i2c3_cfg_func {
+				pinctrl-single,pins = <
+					0x100 0		/* I2C3_SCL (IOCFG73) */
+					0x104 0		/* I2C3_SDA (IOCFG74) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func1: spi0_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1d4 0		/* SPI0_CLK (IOCFG125) */
+					0x1d8 0		/* SPI0_DI (IOCFG126) */
+					0x1dc 0		/* SPI0_DO (IOCFG127) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func2: spi0_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
+					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
+					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
+					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func1: spi1_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1f0 0		/* SPI1_CLK (IOCFG132) */
+					0x1f4 0		/* SPI1_DI (IOCFG133) */
+					0x1f8 0		/* SPI1_DO (IOCFG134) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func2: spi1_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1fc 0		/* SPI1_CS (IOCFG135) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			kpc_cfg_func: kpc_cfg_func {
+				pinctrl-single,pins = <
+					0x250 0		/* KEY_IN0 (IOCFG156) */
+					0x254 0		/* KEY_IN1 (IOCFG157) */
+					0x258 0		/* KEY_IN2 (IOCFG158) */
+					0x230 0		/* KEY_OUT0 (IOCFG148) */
+					0x234 0		/* KEY_OUT1 (IOCFG149) */
+					0x238 0		/* KEY_OUT2 (IOCFG150) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			emmc_cfg_func: emmc_cfg_func {
+				pinctrl-single,pins = <
+					0x0ac 0		/* eMMC_CMD (IOCFG40) */
+					0x0b0 0		/* eMMC_CLK (IOCFG41) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func1: sd_cfg_func1 {
+				pinctrl-single,pins = <
+					0x18c 0		/* SD_CLK (IOCFG107) */
+					0x190 0		/* SD_CMD (IOCFG108) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func2: sd_cfg_func2 {
+				pinctrl-single,pins = <
+					0x194 0		/* SD_DATA0 (IOCFG109) */
+					0x198 0		/* SD_DATA1 (IOCFG110) */
+					0x19c 0		/* SD_DATA2 (IOCFG111) */
+					0x1a0 0		/* SD_DATA3 (IOCFG112) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x70 0xf0>;
+			};
+			nand_cfg_func1: nand_cfg_func1 {
+				pinctrl-single,pins = <
+					0x03c 0		/* NAND_ALE (IOCFG12) */
+					0x040 0		/* NAND_CLE (IOCFG13) */
+					0x06c 0		/* NAND_DATA0 (IOCFG24) */
+					0x070 0		/* NAND_DATA1 (IOCFG25) */
+					0x074 0		/* NAND_DATA2 (IOCFG26) */
+					0x078 0		/* NAND_DATA3 (IOCFG27) */
+					0x07c 0		/* NAND_DATA4 (IOCFG28) */
+					0x080 0		/* NAND_DATA5 (IOCFG29) */
+					0x084 0		/* NAND_DATA6 (IOCFG30) */
+					0x088 0		/* NAND_DATA7 (IOCFG31) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			nand_cfg_func2: nand_cfg_func2 {
+				pinctrl-single,pins = <
+					0x044 0		/* NAND_RE_N (IOCFG14) */
+					0x048 0		/* NAND_WE_N (IOCFG15) */
+					0x04c 0		/* NAND_CS0_N (IOCFG16) */
+					0x050 0		/* NAND_CS1_N (IOCFG17) */
+					0x054 0		/* NAND_CS2_N (IOCFG18) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
+					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sdio_cfg_func: sdio_cfg_func {
+				pinctrl-single,pins = <
+					0x1a4 0		/* SDIO0_CLK (IOCG113) */
+					0x1a8 0		/* SDIO0_CMD (IOCG114) */
+					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
+					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
+					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
+					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			audio_out_cfg_func: audio_out_cfg_func {
+				pinctrl-single,pins = <
+					0x200 0		/* GPIO (IOCFG136) */
+					0x204 0		/* GPIO (IOCFG137) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		call {
+			label = "call";
+			gpios = <&gpio17 2 0>;
+			linux,code = <169>;	/* KEY_PHONE */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
new file mode 100644
index 000000000..f683440ee
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -0,0 +1,577 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+#include <dt-bindings/clock/hi3620-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	pclk: clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hi3620-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	amba {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xfc000000 0x2000000>;
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0x100000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			/* gic dist base, gic cpu base */
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+
+		sysctrl: system-controller@802000 {
+			compatible = "hisilicon,sysctrl", "syscon";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x802000 0x1000>;
+			reg = <0x802000 0x1000>;
+
+			smp-offset = <0x31c>;
+			resume-offset = <0x308>;
+			reboot-offset = <0x4>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hi3620-clock";
+				reg = <0 0x10000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		dual_timer0: dual_timer@800000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x800000 0x1000>;
+			/* timer00 & timer01 */
+			interrupts = <0 0 4>, <0 1 4>;
+			clocks = <&clock HI3620_TIMER0_MUX>,
+				 <&clock HI3620_TIMER1_MUX>,
+				 <&clock HI3620_TIMER0_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer1: dual_timer@801000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x801000 0x1000>;
+			/* timer10 & timer11 */
+			interrupts = <0 2 4>, <0 3 4>;
+			clocks = <&clock HI3620_TIMER2_MUX>,
+				 <&clock HI3620_TIMER3_MUX>,
+				 <&clock HI3620_TIMER2_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer2: dual_timer@a01000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa01000 0x1000>;
+			/* timer20 & timer21 */
+			interrupts = <0 4 4>, <0 5 4>;
+			clocks = <&clock HI3620_TIMER4_MUX>,
+				 <&clock HI3620_TIMER5_MUX>,
+				 <&clock HI3620_TIMER4_MUX>;
+			clock-names = "timer0lck", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer3: dual_timer@a02000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa02000 0x1000>;
+			/* timer30 & timer31 */
+			interrupts = <0 6 4>, <0 7 4>;
+			clocks = <&clock HI3620_TIMER6_MUX>,
+				 <&clock HI3620_TIMER7_MUX>,
+				 <&clock HI3620_TIMER6_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer4: dual_timer@a03000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa03000 0x1000>;
+			/* timer40 & timer41 */
+			interrupts = <0 96 4>, <0 97 4>;
+			clocks = <&clock HI3620_TIMER8_MUX>,
+				 <&clock HI3620_TIMER9_MUX>,
+				 <&clock HI3620_TIMER8_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		uart0: uart@b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb00000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&clock HI3620_UARTCLK0>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: uart@b01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb01000 0x1000>;
+			interrupts = <0 21 4>;
+			clocks = <&clock HI3620_UARTCLK1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: uart@b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb02000 0x1000>;
+			interrupts = <0 22 4>;
+			clocks = <&clock HI3620_UARTCLK2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: uart@b03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb03000 0x1000>;
+			interrupts = <0 23 4>;
+			clocks = <&clock HI3620_UARTCLK3>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: uart@b04000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb04000 0x1000>;
+			interrupts = <0 24 4>;
+			clocks = <&clock HI3620_UARTCLK4>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio0: gpio@806000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x806000 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@807000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x807000 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+					&pmx0 6 5 1 &pmx0 7 6 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@808000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x808000 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+					&pmx0 6 3 1 &pmx0 7 3 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@809000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x809000 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+					&pmx0 6 11 1 &pmx0 7 11 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@80a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80a000 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+					&pmx0 6 13 1 &pmx0 7 13 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@80b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80b000 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+					&pmx0 6 16 1 &pmx0 7 16 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@80c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80c000 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+					&pmx0 6 18 1 &pmx0 7 19 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@80d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80d000 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+					&pmx0 6 25 1 &pmx0 7 26 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@80e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80e000 0x1000>;
+			interrupts = <0 72 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+					&pmx0 6 33 1 &pmx0 7 34 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@80f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80f000 0x1000>;
+			interrupts = <0 73 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+					&pmx0 6 41 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@810000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x810000 0x1000>;
+			interrupts = <0 74 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@811000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x811000 0x1000>;
+			interrupts = <0 75 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+					&pmx0 6 49 1 &pmx0 7 49 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@812000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x812000 0x1000>;
+			interrupts = <0 76 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+					&pmx0 6 51 1 &pmx0 7 52 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@813000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x813000 0x1000>;
+			interrupts = <0 77 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+					&pmx0 6 55 1 &pmx0 7 56 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@814000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x814000 0x1000>;
+			interrupts = <0 78 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+					&pmx0 6 60 1 &pmx0 7 61 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@815000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x815000 0x1000>;
+			interrupts = <0 79 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+					&pmx0 6 64 1 &pmx0 7 65 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@816000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x816000 0x1000>;
+			interrupts = <0 80 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+					&pmx0 6 72 1 &pmx0 7 73 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@817000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x817000 0x1000>;
+			interrupts = <0 81 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+					&pmx0 6 80 1 &pmx0 7 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@818000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x818000 0x1000>;
+			interrupts = <0 82 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+					&pmx0 6 86 1 &pmx0 7 87 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@819000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x819000 0x1000>;
+			interrupts = <0 83 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+					&pmx0 3 88 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@81a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81a000 0x1000>;
+			interrupts = <0 84 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@81b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81b000 0x1000>;
+			interrupts = <0 85 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK21>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@803000 {
+			compatible = "pinctrl-single";
+			reg = <0x803000 0x188>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <3>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+						&range 12 1 0 &range 13 29 1
+						&range 43 1 0 &range 44 49 1
+						&range 94 1 1 &range 96 2 1>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			compatible = "pinconf-single";
+			reg = <0x803800 0x2dc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#pinctrl-cells = <1>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
new file mode 100644
index 000000000..b6b0225a7
--- /dev/null
+++ b/arch/arm/boot/dts/highbank.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda Highbank";
+	compatible = "calxeda,highbank";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x900>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@901 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x901>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@902 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x902>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@903 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x903>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0xff900000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0xffffffff>;
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		timer@fff10600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfff10600 0x20>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		watchdog@fff10620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xfff10620 0x20>;
+			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff10100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xfff12000 0x1000>;
+			interrupts = <0 70 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
+		};
+
+
+		sregs@fff3c200 {
+			compatible = "calxeda,hb-sregs-l2-ecc";
+			reg = <0xfff3c200 0x100>;
+			interrupts = <0 71 4>, <0 72 4>;
+		};
+
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
new file mode 100644
index 000000000..f05e74eac
--- /dev/null
+++ b/arch/arm/boot/dts/hip01-ca9x2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/dts-v1/;
+
+/* First 8KB reserved for secondary core boot */
+/memreserve/ 0x80000000 0x00002000;
+
+#include "hip01.dtsi"
+
+/ {
+	model = "Hisilicon HIP01 Development Board";
+	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hip01-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
new file mode 100644
index 000000000..975d39828
--- /dev/null
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
+	};
+
+	hisi_refclk144mhz: refclk144mkhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <144000000>;
+		clock-output-names = "hisi:refclk144khz";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0x10000000 0x20000000>;
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges;
+
+			uart0: uart@10001000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10001000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 32 4>;
+				status = "disabled";
+			};
+
+			uart1: uart@10002000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10002000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 33 4>;
+				status = "disabled";
+			};
+
+			uart2: uart@10003000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10003000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 34 4>;
+				status = "disabled";
+			};
+
+			uart3: uart@10006000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10006000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 4 4>;
+				status = "disabled";
+			};
+		};
+
+		system-controller@10000000 {
+			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+			reg = <0x10000000 0x1000>;
+			reboot-offset = <0x4>;
+		};
+
+		global_timer@a000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0a000200 0x100>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+
+		local_timer@a000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0a000600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
new file mode 100644
index 000000000..9019e0d2e
--- /dev/null
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@0,10000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
+	};
+
+	soc {
+		uart0: uart@4007000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 000000000..555bc6b67
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,986 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hisilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	bootwrapper {
+		compatible = "hisilicon,hip04-bootwrapper";
+		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	clk_50m: clk_50m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	clk_168m: clk_168m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <168000000>;
+	};
+
+	clk_375m: clk_375m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <375000000>;
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-intc";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x3e00000 0x00100000>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <0 64 4>,
+				     <0 65 4>,
+				     <0 66 4>,
+				     <0 67 4>,
+				     <0 68 4>,
+				     <0 69 4>,
+				     <0 70 4>,
+				     <0 71 4>,
+				     <0 72 4>,
+				     <0 73 4>,
+				     <0 74 4>,
+				     <0 75 4>,
+				     <0 76 4>,
+				     <0 77 4>,
+				     <0 78 4>,
+				     <0 79 4>;
+		};
+
+		uart0: uart@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clk_168m>;
+			clock-names = "uartclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		sata0: sata@a000000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0xa000000 0x1000000>;
+			interrupts = <0 372 4>;
+		};
+
+	};
+
+	etb@0,e3c42000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c42000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3c82000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c82000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3cc2000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3cc2000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3d02000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3d02000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@0,e3c05000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0xe3c05000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator0 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator0_out_port0: endpoint {
+					remote-endpoint = <&etb0_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator0_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator0_in_port0: endpoint {
+					remote-endpoint = <&funnel0_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator1 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator1_out_port0: endpoint {
+					remote-endpoint = <&etb1_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator1_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator1_in_port0: endpoint {
+					remote-endpoint = <&funnel1_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator2 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator2_out_port0: endpoint {
+					remote-endpoint = <&etb2_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+					replicator2_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port2>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator2_in_port0: endpoint {
+					remote-endpoint = <&funnel2_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator3 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator3_out_port0: endpoint {
+					remote-endpoint = <&etb3_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator3_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port3>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator3_in_port0: endpoint {
+					remote-endpoint = <&funnel3_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c41000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c41000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel0_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel0_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel0_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel0_in_port2: endpoint {
+					remote-endpoint = <&ptm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel0_in_port3: endpoint {
+					remote-endpoint = <&ptm3_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c81000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c81000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel1_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator1_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel1_in_port0: endpoint {
+					remote-endpoint = <&ptm4_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel1_in_port1: endpoint {
+					remote-endpoint = <&ptm5_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel1_in_port2: endpoint {
+					remote-endpoint = <&ptm6_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel1_in_port3: endpoint {
+					remote-endpoint = <&ptm7_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3cc1000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3cc1000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel2_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator2_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel2_in_port0: endpoint {
+					remote-endpoint = <&ptm8_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel2_in_port1: endpoint {
+					remote-endpoint = <&ptm9_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel2_in_port2: endpoint {
+					remote-endpoint = <&ptm10_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel2_in_port3: endpoint {
+					remote-endpoint = <&ptm11_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3d01000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3d01000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel3_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator3_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel3_in_port0: endpoint {
+					remote-endpoint = <&ptm12_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel3_in_port1: endpoint {
+					remote-endpoint = <&ptm13_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel3_in_port2: endpoint {
+					remote-endpoint = <&ptm14_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel3_in_port3: endpoint {
+					remote-endpoint = <&ptm15_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c04000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c04000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel4_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel4_in_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_out_port1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel4_in_port1: endpoint {
+					remote-endpoint =
+						<&replicator1_out_port1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel4_in_port2: endpoint {
+					remote-endpoint =
+						<&replicator2_out_port1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel4_in_port3: endpoint {
+					remote-endpoint =
+						<&replicator3_out_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU4>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbd000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU5>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU6>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbf000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbf000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU7>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU8>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfd000 0 0x1000>;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU9>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU10>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cff000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cff000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU11>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU12>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU13>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU14>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU15>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
new file mode 100644
index 000000000..d55e9cd3b
--- /dev/null
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ */
+
+/dts-v1/;
+#include "hisi-x5hd2.dtsi"
+
+/ {
+	model = "Hisilicon HIX5HD2 Development Board";
+	compatible = "hisilicon,hix5hd2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hix5hd2-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy2>;
+	phy-mode = "mii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ahci {
+	phys = <&sata_phy>;
+	phy-names = "sata-phy";
+};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
new file mode 100644
index 000000000..e2dbf1d8a
--- /dev/null
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ */
+
+#include <dt-bindings/clock/hix5hd2-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gic: interrupt-controller@f8a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		/* gic dist base, gic cpu base */
+		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xf8000000 0x8000000>;
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges;
+
+			timer0: timer@2000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00002000 0x1000>;
+				/* timer00 & timer01 */
+				interrupts = <0 24 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer1: timer@a29000 {
+				/*
+				 * Only used in NORMAL state, not available ins
+				 * SLOW or DOZE state.
+				 * The rate is fixed in 24MHz.
+				 */
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a29000 0x1000>;
+				/* timer10 & timer11 */
+				interrupts = <0 25 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer2: timer@a2a000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2a000 0x1000>;
+				/* timer20 & timer21 */
+				interrupts = <0 26 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer3: timer@a2b000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2b000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 27 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer4: timer@a81000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a81000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 28 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			uart0: uart@b00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b00000 0x1000>;
+				interrupts = <0 49 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart1: uart@6000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00006000 0x1000>;
+				interrupts = <0 50 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart2: uart@b02000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b02000 0x1000>;
+				interrupts = <0 51 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart3: uart@b03000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b03000 0x1000>;
+				interrupts = <0 52 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart4: uart@b04000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb04000 0x1000>;
+				interrupts = <0 53 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio0: gpio@b20000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb20000 0x1000>;
+				interrupts = <0 108 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@b21000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb21000 0x1000>;
+				interrupts = <0 109 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@b22000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb22000 0x1000>;
+				interrupts = <0 110 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio3: gpio@b23000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb23000 0x1000>;
+				interrupts = <0 111 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio4: gpio@b24000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb24000 0x1000>;
+				interrupts = <0 112 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio5: gpio@4000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0x004000 0x1000>;
+				interrupts = <0 113 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio6: gpio@b26000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb26000 0x1000>;
+				interrupts = <0 114 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio7: gpio@b27000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb27000 0x1000>;
+				interrupts = <0 115 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio8: gpio@b28000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb28000 0x1000>;
+				interrupts = <0 116 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio9: gpio@b29000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb29000 0x1000>;
+				interrupts = <0 117 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio10: gpio@b2a000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2a000 0x1000>;
+				interrupts = <0 118 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio11: gpio@b2b000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2b000 0x1000>;
+				interrupts = <0 119 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio12: gpio@b2c000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2c000 0x1000>;
+				interrupts = <0 120 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio13: gpio@b2d000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2d000 0x1000>;
+				interrupts = <0 121 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio14: gpio@b2e000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2e000 0x1000>;
+				interrupts = <0 122 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio15: gpio@b2f000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2f000 0x1000>;
+				interrupts = <0 123 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio16: gpio@b30000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb30000 0x1000>;
+				interrupts = <0 124 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio17: gpio@b31000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb31000 0x1000>;
+				interrupts = <0 125 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			wdt0: watchdog@a2c000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0xa2c000 0x1000>;
+				interrupts = <0 29 4>;
+				clocks = <&clock HIX5HD2_WDG0_RST>,
+					 <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "wdog_clk", "apb_pclk";
+			};
+		};
+
+		local_timer@a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		l2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a10000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		sysctrl: system-controller@0 {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x00000000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+
+		cpuctrl@a22000 {
+			compatible = "hisilicon,cpuctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00a22000 0x2000>;
+			ranges = <0 0x00a22000 0x2000>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hix5hd2-clock";
+				reg = <0 0x2000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		/* unremovable emmc as mmcblk0 */
+		mmc: mmc@1830000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1830000 0x1000>;
+			interrupts = <0 35 4>;
+			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
+				 <&clock HIX5HD2_MMC_BIU_CLK>;
+			clock-names = "ciu", "biu";
+		};
+
+		sd: mmc@1820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1820000 0x1000>;
+			interrupts = <0 34 4>;
+			clocks = <&clock HIX5HD2_SD_CIU_RST>,
+				 <&clock HIX5HD2_SD_BIU_CLK>;
+			clock-names = "ciu","biu";
+		};
+
+		gmac0: ethernet@1840000 {
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
+			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
+			interrupts = <0 71 4>;
+			clocks = <&clock HIX5HD2_MAC0_CLK>;
+			clock-names = "mac_core";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1841000 {
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
+			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
+			interrupts = <0 72 4>;
+			clocks = <&clock HIX5HD2_MAC1_CLK>;
+			clock-names = "mac_core";
+			status = "disabled";
+		};
+
+		usb0: ehci@1890000 {
+			compatible = "generic-ehci";
+			reg = <0x1890000 0x1000>;
+			interrupts = <0 66 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		usb1: ohci@1880000 {
+			compatible = "generic-ohci";
+			reg = <0x1880000 0x1000>;
+			interrupts = <0 67 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		peripheral_ctrl: syscon@a20000 {
+			compatible = "syscon";
+			reg = <0xa20000 0x1000>;
+		};
+
+		sata_phy: phy@1900000 {
+			compatible = "hisilicon,hix5hd2-sata-phy";
+			reg = <0x1900000 0x10000>;
+			#phy-cells = <0>;
+			hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+			hisilicon,power-reg = <0x8 10>;
+		};
+
+		ahci: sata@1900000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0x1900000 0x10000>;
+			interrupts = <0 70 4>;
+			clocks = <&clock HIX5HD2_SATA_CLK>;
+		};
+
+		ir: ir@1000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x001000 0x1000>;
+			interrupts = <0 47 4>;
+			clocks = <&clock HIX5HD2_FIXED_24M>;
+			hisilicon,power-syscon = <&sysctrl>;
+		};
+
+		i2c0: i2c@b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb10000 0x1000>;
+			interrupts = <0 38 4>;
+			clocks = <&clock HIX5HD2_I2C0_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb11000 0x1000>;
+			interrupts = <0 39 4>;
+			clocks = <&clock HIX5HD2_I2C1_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb12000 0x1000>;
+			interrupts = <0 40 4>;
+			clocks = <&clock HIX5HD2_I2C2_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb13000 0x1000>;
+			interrupts = <0 41 4>;
+			clocks = <&clock HIX5HD2_I2C3_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@b16000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb16000 0x1000>;
+			interrupts = <0 43 4>;
+			clocks = <&clock HIX5HD2_I2C4_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@b17000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb17000 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&clock HIX5HD2_I2C5_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
new file mode 100644
index 000000000..a0fa65b44
--- /dev/null
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ@1 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ@2 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
new file mode 100644
index 000000000..5833fb6f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Freescale MX1 ADS";
+	compatible = "fsl,imx1ads", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x04000000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+
+	extgpio0: pcf8575@22 {
+		compatible = "nxp,pcf8575";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	extgpio1: pcf8575@24 {
+		compatible = "nxp,pcf8575";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <4>;
+		fsl,weim-cs-timing = <0x00003e00 0x00000801>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&iomuxc {
+	imx1-ads {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX1_PAD_SPI1_MISO__SPI1_MISO	0x0
+				MX1_PAD_SPI1_MOSI__SPI1_MOSI	0x0
+				MX1_PAD_SPI1_RDY__SPI1_RDY	0x0
+				MX1_PAD_SPI1_SCLK__SPI1_SCLK	0x0
+				MX1_PAD_SPI1_SS__GPIO3_15	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
new file mode 100644
index 000000000..77b21aa7a
--- /dev/null
+++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Armadeus APF9328";
+	compatible = "armadeus,imx1-apf9328", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x00800000>;
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00330e04 0x00000d01>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	eth: eth@4,c00000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth>;
+		compatible = "davicom,dm9000";
+		reg = <
+			4 0x00c00000 0x2
+			4 0x00c00002 0x2
+		>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
+	};
+};
+
+&iomuxc {
+	imx1-apf9328 {
+		pinctrl_eth: ethgrp {
+			fsl,pins = <
+				MX1_PAD_SIM_SVEN__GPIO2_14	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h
new file mode 100644
index 000000000..050a1fc46
--- /dev/null
+++ b/arch/arm/boot/dts/imx1-pinfunc.h
@@ -0,0 +1,296 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#ifndef __DTS_IMX1_PINFUNC_H
+#define __DTS_IMX1_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - A_OUT
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX1_PAD_A24__A24			0x00 0x004
+#define MX1_PAD_A24__GPIO1_0			0x00 0x032
+#define MX1_PAD_A24__SPI2_CLK			0x00 0x006
+#define MX1_PAD_TIN__TIN			0x01 0x000
+#define MX1_PAD_TIN__GPIO1_1			0x01 0x032
+#define MX1_PAD_TIN__SPI2_RXD			0x01 0x022
+#define MX1_PAD_PWMO__PWMO			0x02 0x004
+#define MX1_PAD_PWMO__GPIO1_2			0x02 0x032
+#define MX1_PAD_CSI_MCLK__CSI_MCLK		0x03 0x004
+#define MX1_PAD_CSI_MCLK__GPIO1_3		0x03 0x032
+#define MX1_PAD_CSI_D0__CSI_D0			0x04 0x000
+#define MX1_PAD_CSI_D0__GPIO1_4			0x04 0x032
+#define MX1_PAD_CSI_D1__CSI_D1			0x05 0x000
+#define MX1_PAD_CSI_D1__GPIO1_5			0x05 0x032
+#define MX1_PAD_CSI_D2__CSI_D2			0x06 0x000
+#define MX1_PAD_CSI_D2__GPIO1_6			0x06 0x032
+#define MX1_PAD_CSI_D3__CSI_D3			0x07 0x000
+#define MX1_PAD_CSI_D3__GPIO1_7			0x07 0x032
+#define MX1_PAD_CSI_D4__CSI_D4			0x08 0x000
+#define MX1_PAD_CSI_D4__GPIO1_8			0x08 0x032
+#define MX1_PAD_CSI_D5__CSI_D5			0x09 0x000
+#define MX1_PAD_CSI_D5__GPIO1_9			0x09 0x032
+#define MX1_PAD_CSI_D6__CSI_D6			0x0a 0x000
+#define MX1_PAD_CSI_D6__GPIO1_10		0x0a 0x032
+#define MX1_PAD_CSI_D7__CSI_D7			0x0b 0x000
+#define MX1_PAD_CSI_D7__GPIO1_11		0x0b 0x032
+#define MX1_PAD_CSI_VSYNC__CSI_VSYNC		0x0c 0x000
+#define MX1_PAD_CSI_VSYNC__GPIO1_12		0x0c 0x032
+#define MX1_PAD_CSI_HSYNC__CSI_HSYNC		0x0d 0x000
+#define MX1_PAD_CSI_HSYNC__GPIO1_13		0x0d 0x032
+#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK		0x0e 0x000
+#define MX1_PAD_CSI_PIXCLK__GPIO1_14		0x0e 0x032
+#define MX1_PAD_I2C_SDA__I2C_SDA		0x0f 0x000
+#define MX1_PAD_I2C_SDA__GPIO1_15		0x0f 0x032
+#define MX1_PAD_I2C_SCL__I2C_SCL		0x10 0x004
+#define MX1_PAD_I2C_SCL__GPIO1_16		0x10 0x032
+#define MX1_PAD_DTACK__DTACK			0x11 0x000
+#define MX1_PAD_DTACK__GPIO1_17			0x11 0x032
+#define MX1_PAD_DTACK__SPI2_SS			0x11 0x002
+#define MX1_PAD_DTACK__A25			0x11 0x016
+#define MX1_PAD_BCLK__BCLK			0x12 0x004
+#define MX1_PAD_BCLK__GPIO1_18			0x12 0x032
+#define MX1_PAD_LBA__LBA			0x13 0x004
+#define MX1_PAD_LBA__GPIO1_19			0x13 0x032
+#define MX1_PAD_ECB__ECB			0x14 0x000
+#define MX1_PAD_ECB__GPIO1_20			0x14 0x032
+#define MX1_PAD_A0__A0				0x15 0x004
+#define MX1_PAD_A0__GPIO1_21			0x15 0x032
+#define MX1_PAD_CS4__CS4			0x16 0x004
+#define MX1_PAD_CS4__GPIO1_22			0x16 0x032
+#define MX1_PAD_CS5__CS5			0x17 0x004
+#define MX1_PAD_CS5__GPIO1_23			0x17 0x032
+#define MX1_PAD_A16__A16			0x18 0x004
+#define MX1_PAD_A16__GPIO1_24			0x18 0x032
+#define MX1_PAD_A17__A17			0x19 0x004
+#define MX1_PAD_A17__GPIO1_25			0x19 0x032
+#define MX1_PAD_A18__A18			0x1a 0x004
+#define MX1_PAD_A18__GPIO1_26			0x1a 0x032
+#define MX1_PAD_A19__A19			0x1b 0x004
+#define MX1_PAD_A19__GPIO1_27			0x1b 0x032
+#define MX1_PAD_A20__A20			0x1c 0x004
+#define MX1_PAD_A20__GPIO1_28			0x1c 0x032
+#define MX1_PAD_A21__A21			0x1d 0x004
+#define MX1_PAD_A21__GPIO1_29			0x1d 0x032
+#define MX1_PAD_A22__A22			0x1e 0x004
+#define MX1_PAD_A22__GPIO1_30			0x1e 0x032
+#define MX1_PAD_A23__A23			0x1f 0x004
+#define MX1_PAD_A23__GPIO1_31			0x1f 0x032
+#define MX1_PAD_SD_DAT0__SD_DAT0		0x28 0x000
+#define MX1_PAD_SD_DAT0__MS_PI0			0x28 0x001
+#define MX1_PAD_SD_DAT0__GPIO2_8		0x28 0x032
+#define MX1_PAD_SD_DAT1__SD_DAT1		0x29 0x000
+#define MX1_PAD_SD_DAT1__MS_PI1			0x29 0x001
+#define MX1_PAD_SD_DAT1__GPIO2_9		0x29 0x032
+#define MX1_PAD_SD_DAT2__SD_DAT2		0x2a 0x000
+#define MX1_PAD_SD_DAT2__MS_SCLKI		0x2a 0x001
+#define MX1_PAD_SD_DAT2__GPIO2_10		0x2a 0x032
+#define MX1_PAD_SD_DAT3__SD_DAT3		0x2b 0x000
+#define MX1_PAD_SD_DAT3__MS_SDIO		0x2b 0x001
+#define MX1_PAD_SD_DAT3__GPIO2_11		0x2b 0x032
+#define MX1_PAD_SD_SCLK__SD_SCLK		0x2c 0x004
+#define MX1_PAD_SD_SCLK__MS_SCLKO		0x2c 0x005
+#define MX1_PAD_SD_SCLK__GPIO2_12		0x2c 0x032
+#define MX1_PAD_SD_CMD__SD_CMD			0x2d 0x000
+#define MX1_PAD_SD_CMD__MS_BS			0x2d 0x005
+#define MX1_PAD_SD_CMD__GPIO2_13		0x2d 0x032
+#define MX1_PAD_SIM_SVEN__SIM_SVEN		0x2e 0x004
+#define MX1_PAD_SIM_SVEN__SSI_RXFS		0x2e 0x001
+#define MX1_PAD_SIM_SVEN__GPIO2_14		0x2e 0x032
+#define MX1_PAD_SIM_PD__SIM_PD			0x2f 0x000
+#define MX1_PAD_SIM_PD__SSI_RXCLK		0x2f 0x001
+#define MX1_PAD_SIM_PD__GPIO2_15		0x2f 0x032
+#define MX1_PAD_SIM_TX__SIM_TX			0x30 0x000
+#define MX1_PAD_SIM_TX__SSI_RXDAT		0x30 0x001
+#define MX1_PAD_SIM_TX__GPIO2_16		0x30 0x032
+#define MX1_PAD_SIM_RX__SIM_RX			0x31 0x000
+#define MX1_PAD_SIM_RX__SSI_TXDAT		0x31 0x005
+#define MX1_PAD_SIM_RX__GPIO2_17		0x31 0x032
+#define MX1_PAD_SIM_RST__SIM_RST		0x32 0x004
+#define MX1_PAD_SIM_RST__SSI_TXFS		0x32 0x001
+#define MX1_PAD_SIM_RST__GPIO2_18		0x32 0x032
+#define MX1_PAD_SIM_CLK__SIM_CLK		0x33 0x004
+#define MX1_PAD_SIM_CLK__SSI_TXCLK		0x33 0x001
+#define MX1_PAD_SIM_CLK__GPIO2_19		0x33 0x032
+#define MX1_PAD_USBD_AFE__USBD_AFE		0x34 0x004
+#define MX1_PAD_USBD_AFE__GPIO2_20		0x34 0x032
+#define MX1_PAD_USBD_OE__USBD_OE		0x35 0x004
+#define MX1_PAD_USBD_OE__GPIO2_21		0x35 0x032
+#define MX1_PAD_USBD_RCV__USBD_RCV		0x36 0x000
+#define MX1_PAD_USBD_RCV__GPIO2_22		0x36 0x032
+#define MX1_PAD_USBD_SUSPND__USBD_SUSPND	0x37 0x004
+#define MX1_PAD_USBD_SUSPND__GPIO2_23		0x37 0x032
+#define MX1_PAD_USBD_VP__USBD_VP		0x38 0x000
+#define MX1_PAD_USBD_VP__GPIO2_24		0x38 0x032
+#define MX1_PAD_USBD_VM__USBD_VM		0x39 0x000
+#define MX1_PAD_USBD_VM__GPIO2_25		0x39 0x032
+#define MX1_PAD_USBD_VPO__USBD_VPO		0x3a 0x004
+#define MX1_PAD_USBD_VPO__GPIO2_26		0x3a 0x032
+#define MX1_PAD_USBD_VMO__USBD_VMO		0x3b 0x004
+#define MX1_PAD_USBD_VMO__GPIO2_27		0x3b 0x032
+#define MX1_PAD_UART2_CTS__UART2_CTS		0x3c 0x004
+#define MX1_PAD_UART2_CTS__GPIO2_28		0x3c 0x032
+#define MX1_PAD_UART2_RTS__UART2_RTS		0x3d 0x000
+#define MX1_PAD_UART2_RTS__GPIO2_29		0x3d 0x032
+#define MX1_PAD_UART2_TXD__UART2_TXD		0x3e 0x004
+#define MX1_PAD_UART2_TXD__GPIO2_30		0x3e 0x032
+#define MX1_PAD_UART2_RXD__UART2_RXD		0x3f 0x000
+#define MX1_PAD_UART2_RXD__GPIO2_31		0x3f 0x032
+#define MX1_PAD_SSI_RXFS__SSI_RXFS		0x43 0x000
+#define MX1_PAD_SSI_RXFS__GPIO3_3		0x43 0x032
+#define MX1_PAD_SSI_RXCLK__SSI_RXCLK		0x44 0x000
+#define MX1_PAD_SSI_RXCLK__GPIO3_4		0x44 0x032
+#define MX1_PAD_SSI_RXDAT__SSI_RXDAT		0x45 0x000
+#define MX1_PAD_SSI_RXDAT__GPIO3_5		0x45 0x032
+#define MX1_PAD_SSI_TXDAT__SSI_TXDAT		0x46 0x004
+#define MX1_PAD_SSI_TXDAT__GPIO3_6		0x46 0x032
+#define MX1_PAD_SSI_TXFS__SSI_TXFS		0x47 0x000
+#define MX1_PAD_SSI_TXFS__GPIO3_7		0x47 0x032
+#define MX1_PAD_SSI_TXCLK__SSI_TXCLK		0x48 0x000
+#define MX1_PAD_SSI_TXCLK__GPIO3_8		0x48 0x032
+#define MX1_PAD_UART1_CTS__UART1_CTS		0x49 0x004
+#define MX1_PAD_UART1_CTS__GPIO3_9		0x49 0x032
+#define MX1_PAD_UART1_RTS__UART1_RTS		0x4a 0x000
+#define MX1_PAD_UART1_RTS__GPIO3_10		0x4a 0x032
+#define MX1_PAD_UART1_TXD__UART1_TXD		0x4b 0x004
+#define MX1_PAD_UART1_TXD__GPIO3_11		0x4b 0x032
+#define MX1_PAD_UART1_RXD__UART1_RXD		0x4c 0x000
+#define MX1_PAD_UART1_RXD__GPIO3_12		0x4c 0x032
+#define MX1_PAD_SPI1_RDY__SPI1_RDY		0x4d 0x000
+#define MX1_PAD_SPI1_RDY__GPIO3_13		0x4d 0x032
+#define MX1_PAD_SPI1_SCLK__SPI1_SCLK		0x4e 0x004
+#define MX1_PAD_SPI1_SCLK__GPIO3_14		0x4e 0x032
+#define MX1_PAD_SPI1_SS__SPI1_SS		0x4f 0x000
+#define MX1_PAD_SPI1_SS__GPIO3_15		0x4f 0x032
+#define MX1_PAD_SPI1_MISO__SPI1_MISO		0x50 0x000
+#define MX1_PAD_SPI1_MISO__GPIO3_16		0x50 0x032
+#define MX1_PAD_SPI1_MOSI__SPI1_MOSI		0x51 0x004
+#define MX1_PAD_SPI1_MOSI__GPIO3_17		0x51 0x032
+#define MX1_PAD_BT13__BT13			0x53 0x004
+#define MX1_PAD_BT13__SSI2_RXCLK		0x53 0x001
+#define MX1_PAD_BT13__GPIO3_19			0x53 0x032
+#define MX1_PAD_BT12__BT12			0x54 0x004
+#define MX1_PAD_BT12__SSI2_TXFS			0x54 0x001
+#define MX1_PAD_BT12__GPIO3_20			0x54 0x032
+#define MX1_PAD_BT11__BT11			0x55 0x004
+#define MX1_PAD_BT11__SSI2_TXCLK		0x55 0x001
+#define MX1_PAD_BT11__GPIO3_21			0x55 0x032
+#define MX1_PAD_BT10__BT10			0x56 0x004
+#define MX1_PAD_BT10__SSI2_TX			0x56 0x001
+#define MX1_PAD_BT10__GPIO3_22			0x56 0x032
+#define MX1_PAD_BT9__BT9			0x57 0x004
+#define MX1_PAD_BT9__SSI2_RX			0x57 0x001
+#define MX1_PAD_BT9__GPIO3_23			0x57 0x032
+#define MX1_PAD_BT8__BT8			0x58 0x004
+#define MX1_PAD_BT8__SSI2_RXFS			0x58 0x001
+#define MX1_PAD_BT8__GPIO3_24			0x58 0x032
+#define MX1_PAD_BT8__UART3_RI			0x58 0x016
+#define MX1_PAD_BT7__BT7			0x59 0x004
+#define MX1_PAD_BT7__GPIO3_25			0x59 0x032
+#define MX1_PAD_BT7__UART3_DSR			0x59 0x016
+#define MX1_PAD_BT6__BT6			0x5a 0x004
+#define MX1_PAD_BT6__GPIO3_26			0x5a 0x032
+#define MX1_PAD_BT6__SPI2_SS3			0x5a 0x016
+#define MX1_PAD_BT6__UART3_DTR			0x5a 0x022
+#define MX1_PAD_BT5__BT5			0x5b 0x000
+#define MX1_PAD_BT5__GPIO3_27			0x5b 0x032
+#define MX1_PAD_BT5__UART3_DCD			0x5b 0x016
+#define MX1_PAD_BT4__BT4			0x5c 0x000
+#define MX1_PAD_BT4__GPIO3_28			0x5c 0x032
+#define MX1_PAD_BT4__UART3_CTS			0x5c 0x016
+#define MX1_PAD_BT3__BT3			0x5d 0x000
+#define MX1_PAD_BT3__GPIO3_29			0x5d 0x032
+#define MX1_PAD_BT3__UART3_RTS			0x5d 0x022
+#define MX1_PAD_BT2__BT2			0x5e 0x004
+#define MX1_PAD_BT2__GPIO3_30			0x5e 0x032
+#define MX1_PAD_BT2__UART3_TX			0x5e 0x016
+#define MX1_PAD_BT1__BT1			0x5f 0x000
+#define MX1_PAD_BT1__GPIO3_31			0x5f 0x032
+#define MX1_PAD_BT1__UART3_RX			0x5f 0x022
+#define MX1_PAD_LSCLK__LSCLK			0x66 0x004
+#define MX1_PAD_LSCLK__GPIO4_6			0x66 0x032
+#define MX1_PAD_REV__REV			0x67 0x004
+#define MX1_PAD_REV__UART2_DTR			0x67 0x001
+#define MX1_PAD_REV__GPIO4_7			0x67 0x032
+#define MX1_PAD_REV__SPI2_CLK			0x67 0x006
+#define MX1_PAD_CLS__CLS			0x68 0x004
+#define MX1_PAD_CLS__UART2_DCD			0x68 0x005
+#define MX1_PAD_CLS__GPIO4_8			0x68 0x032
+#define MX1_PAD_CLS__SPI2_SS			0x68 0x002
+#define MX1_PAD_PS__PS				0x69 0x004
+#define MX1_PAD_PS__UART2_RI			0x69 0x005
+#define MX1_PAD_PS__GPIO4_9			0x69 0x032
+#define MX1_PAD_PS__SPI2_RXD			0x69 0x022
+#define MX1_PAD_SPL_SPR__SPL_SPR		0x6a 0x004
+#define MX1_PAD_SPL_SPR__UART2_DSR		0x6a 0x005
+#define MX1_PAD_SPL_SPR__GPIO4_10		0x6a 0x032
+#define MX1_PAD_SPL_SPR__SPI2_TXD		0x6a 0x006
+#define MX1_PAD_CONTRAST__CONTRAST		0x6b 0x004
+#define MX1_PAD_CONTRAST__GPIO4_11		0x6b 0x032
+#define MX1_PAD_CONTRAST__SPI2_SS2		0x6b 0x012
+#define MX1_PAD_ACD_OE__ACD_OE			0x6c 0x004
+#define MX1_PAD_ACD_OE__GPIO4_12		0x6c 0x032
+#define MX1_PAD_LP_HSYNC__LP_HSYNC		0x6d 0x004
+#define MX1_PAD_LP_HSYNC__GPIO4_13		0x6d 0x032
+#define MX1_PAD_FLM_VSYNC__FLM_VSYNC		0x6e 0x004
+#define MX1_PAD_FLM_VSYNC__GPIO4_14		0x6e 0x032
+#define MX1_PAD_LD0__LD0			0x6f 0x004
+#define MX1_PAD_LD0__GPIO4_15			0x6f 0x032
+#define MX1_PAD_LD1__LD1			0x70 0x004
+#define MX1_PAD_LD1__GPIO4_16			0x70 0x032
+#define MX1_PAD_LD2__LD2			0x71 0x004
+#define MX1_PAD_LD2__GPIO4_17			0x71 0x032
+#define MX1_PAD_LD3__LD3			0x72 0x004
+#define MX1_PAD_LD3__GPIO4_18			0x72 0x032
+#define MX1_PAD_LD4__LD4			0x73 0x004
+#define MX1_PAD_LD4__GPIO4_19			0x73 0x032
+#define MX1_PAD_LD5__LD5			0x74 0x004
+#define MX1_PAD_LD5__GPIO4_20			0x74 0x032
+#define MX1_PAD_LD6__LD6			0x75 0x004
+#define MX1_PAD_LD6__GPIO4_21			0x75 0x032
+#define MX1_PAD_LD7__LD7			0x76 0x004
+#define MX1_PAD_LD7__GPIO4_22			0x76 0x032
+#define MX1_PAD_LD8__LD8			0x77 0x004
+#define MX1_PAD_LD8__GPIO4_23			0x77 0x032
+#define MX1_PAD_LD9__LD9			0x78 0x004
+#define MX1_PAD_LD9__GPIO4_24			0x78 0x032
+#define MX1_PAD_LD10__LD10			0x79 0x004
+#define MX1_PAD_LD10__GPIO4_25			0x79 0x032
+#define MX1_PAD_LD11__LD11			0x7a 0x004
+#define MX1_PAD_LD11__GPIO4_26			0x7a 0x032
+#define MX1_PAD_LD12__LD12			0x7b 0x004
+#define MX1_PAD_LD12__GPIO4_27			0x7b 0x032
+#define MX1_PAD_LD13__LD13			0x7c 0x004
+#define MX1_PAD_LD13__GPIO4_28			0x7c 0x032
+#define MX1_PAD_LD14__LD14			0x7d 0x004
+#define MX1_PAD_LD14__GPIO4_29			0x7d 0x032
+#define MX1_PAD_LD15__LD15			0x7e 0x004
+#define MX1_PAD_LD15__GPIO4_30			0x7e 0x032
+#define MX1_PAD_TMR2OUT__TMR2OUT		0x7f 0x000
+#define MX1_PAD_TMR2OUT__GPIO4_31		0x7f 0x032
+#define MX1_PAD_TMR2OUT__SPI2_TXD		0x7f 0x006
+
+#endif
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
new file mode 100644
index 000000000..9b9409878
--- /dev/null
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+
+#include "imx1-pinfunc.h"
+
+#include <dt-bindings/clock/imx1-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+	};
+
+	aitc: aitc-interrupt-controller@223000 {
+		compatible = "fsl,imx1-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x00223000 0x1000>;
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "arm,arm920t";
+			operating-points = <200000 1900000>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX1_CLK_MCU>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	clocks {
+		clk32 {
+			compatible = "fsl,imx-clk32", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi@200000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00200000 0x10000>;
+			ranges;
+
+			gpt1: timer@202000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00202000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@203000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00203000 0x1000>;
+				interrupts = <58>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			fb: fb@205000 {
+				compatible = "fsl,imx1-fb";
+				reg = <0x00205000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER2>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@206000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00206000 0x1000>;
+				interrupts = <30 29 26>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@207000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00207000 0x1000>;
+				interrupts = <24 23 20>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm: pwm@208000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx1-pwm";
+				reg = <0x00208000 0x1000>;
+				interrupts = <34>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			dma: dma@209000 {
+				compatible = "fsl,imx1-dma";
+				reg = <0x00209000 0x1000>;
+				interrupts = <61 60>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_DMA_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+			};
+
+			uart3: serial@20a000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x0020a000 0x1000>;
+				interrupts = <54 4 1>;
+				clocks = <&clks IMX1_CLK_UART3_GATE>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aipi@210000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00210000 0x10000>;
+			ranges;
+
+			cspi1: spi@213000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00213000 0x1000>;
+				interrupts = <41>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c: i2c@217000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-i2c";
+				reg = <0x00217000 0x1000>;
+				interrupts = <39>;
+				clocks = <&clks IMX1_CLK_HCLK>;
+				status = "disabled";
+			};
+
+			cspi2: spi@219000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00219000 0x1000>;
+				interrupts = <40>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			clks: ccm@21b000 {
+				compatible = "fsl,imx1-ccm";
+				reg = <0x0021b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iomuxc: iomuxc@21c000 {
+				compatible = "fsl,imx1-iomuxc";
+				reg = <0x0021c000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@21c000 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c000 0x100>;
+					interrupts = <11>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@21c100 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c100 0x100>;
+					interrupts = <12>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@21c200 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c200 0x100>;
+					interrupts = <13>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@21c300 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c300 0x100>;
+					interrupts = <62>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+
+		weim: weim@220000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx1-weim";
+			reg = <0x00220000 0x1000>;
+			clocks = <&clks IMX1_CLK_DUMMY>;
+			ranges = <
+				0 0 0x10000000 0x02000000
+				1 0 0x12000000 0x01000000
+				2 0 0x13000000 0x01000000
+				3 0 0x14000000 0x01000000
+				4 0 0x15000000 0x01000000
+				5 0 0x16000000 0x01000000
+			>;
+			status = "disabled";
+		};
+
+		esram: esram@300000 {
+			compatible = "mmio-sram";
+			reg = <0x00300000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
new file mode 100644
index 000000000..3b609d987
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+				status = "okay";
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				status = "okay";
+
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
new file mode 100644
index 000000000..0729e72f2
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "i.MX23 Olinuxino Low Cost Board";
+	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				broken-cd;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_ALE__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio2_1: led_gpio2_1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ssp1: spi@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_b>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "host";
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio2_1>;
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
new file mode 100644
index 000000000..5c0f32ca3
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
new file mode 100644
index 000000000..46057d9bf
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "SanDisk Sansa Fuze+";
+	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_8bit_pins_a>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D08__GPIO_0_8
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_AUART1_RTS__GPIO_0_27
+						MX23_PAD_AUART1_CTS__GPIO_0_26
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+						MX23_PAD_LCD_DOTCK__GPIO_1_22
+						MX23_PAD_LCD_HSYNC__GPIO_1_24
+						MX23_PAD_PWM3__GPIO_1_29
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 8 0>;
+	};
+
+	reg_vddio_sd1: regulator-vddio-sd1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_vdd_touchpad: regulator-vdd-touchpad0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-touchpad0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_vdd_tuner: regulator-vdd-tuner0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-tuner0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	i2c-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio1 24 0		/* SDA */
+			&gpio1 22 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+
+	i2c-1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio0 31 0		/* SDA */
+			&gpio0 30 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+
+		touch: touch@20 {
+			compatible = "synaptics,synaptics_i2c";
+			reg = <0x20>;
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
new file mode 100644
index 000000000..da4b88f32
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale STMP378x Development Board";
+	compatible = "fsl,stmp378x-devb", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vddio_sd0: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
new file mode 100644
index 000000000..a6213c590
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Creative ZEN X-Fi3";
+	compatible = "creative,x-fi3", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_4bit_pins_a>;
+				bus-width = <4>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				key_pins_a: keys@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_ROTARYA__GPIO_2_7
+						MX23_PAD_ROTARYB__GPIO_2_8
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 7 0>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		voldown {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio2 7 0>;
+			debounce-interval = <20>;
+		};
+
+		volup {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio2 8 0>;
+			debounce-interval = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
new file mode 100644
index 000000000..ce3d6360a
--- /dev/null
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include "imx23-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma_apbh: dma-controller@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <0 14 20 0
+					      13 13 13 13>;
+				interrupt-names = "empty", "ssp0", "ssp1", "empty",
+						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				#dma-cells = <1>;
+				dma-channels = <8>;
+				clocks = <&clks 15>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 0x2000>;
+				status = "disabled";
+			};
+
+			nand-controller@8000c000 {
+				compatible = "fsl,imx23-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
+				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				reg = <0x80010000 0x2000>;
+				interrupts = <15>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 0x2000>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_fixup: gpmi-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM2__PWM2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_a: i2c@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_b: i2c@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_ENABLE__I2C_SCL
+						MX23_PAD_LCD_HSYNC__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_c: i2c@2 {
+					reg = <2>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA1__I2C_SCL
+						MX23_PAD_SSP1_DATA2__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <7 5 9 26
+					      19 0 25 23
+					      60 58 9 0
+					      0 0 0 0>;
+				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+						  "saif0", "empty", "auart0-rx", "auart0-tx",
+						  "auart1-rx", "auart1-tx", "saif1", "empty",
+						  "empty", "empty", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 16>;
+			};
+
+			dcp: crypto@80028000 {
+				compatible = "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <53 54>;
+				status = "okay";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				status = "disabled";
+			};
+
+			efuse@8002c000 {
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 15>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				compatible = "fsl,imx23-lcdif";
+				reg = <0x80030000 2000>;
+				interrupts = <46 45>;
+				clocks = <&clks 38>;
+				status = "disabled";
+			};
+
+			ssp1: spi@80034000 {
+				reg = <0x80034000 0x2000>;
+				interrupts = <2>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 0x2000>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 0x2000>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 0x2000>;
+				dmas = <&dma_apbx 10>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 0x2000>;
+				dmas = <&dma_apbx 1>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 0x2000>;
+				dmas = <&dma_apbx 0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx23-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <36 37 38 39 40 41 42 43 44>;
+				status = "disabled";
+				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			i2c: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <27>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x8005c000 0x2000>;
+				interrupts = <22>;
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <5>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
+			};
+
+			auart0: serial@8006c000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <24>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <59>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 000000000..0703f62d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 000000000..7d4301b22
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&qvga_timings>;
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 000000000..80a7f96de
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&dvi_svga_timings>;
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 000000000..24027a1fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&dvi_vga_timings>;
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 000000000..3f38c2e60
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
+				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
+				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
+				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0			0x1
+				MX25_PAD_LD1__LD1			0x1
+				MX25_PAD_LD2__LD2			0x1
+				MX25_PAD_LD3__LD3			0x1
+				MX25_PAD_LD4__LD4			0x1
+				MX25_PAD_LD5__LD5			0x1
+				MX25_PAD_LD6__LD6			0x1
+				MX25_PAD_LD7__LD7			0x1
+				MX25_PAD_LD8__LD8			0x1
+				MX25_PAD_LD9__LD9			0x1
+				MX25_PAD_LD10__LD10			0x1
+				MX25_PAD_LD11__LD11			0x1
+				MX25_PAD_LD12__LD12			0x1
+				MX25_PAD_LD13__LD13			0x1
+				MX25_PAD_LD14__LD14			0x1
+				MX25_PAD_LD15__LD15			0x1
+				MX25_PAD_GPIO_E__LD16			0x1
+				MX25_PAD_GPIO_F__LD17			0x1
+				MX25_PAD_HSYNC__HSYNC			0x80000000
+				MX25_PAD_VSYNC__VSYNC			0x80000000
+				MX25_PAD_LSCLK__LSCLK			0x80000000
+				MX25_PAD_OE_ACD__OE_ACD			0x80000000
+				MX25_PAD_CONTRAST__CONTRAST		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
+				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
+				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
+				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	status = "okay";
+};
+
+&usbotg {
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
new file mode 100644
index 000000000..0950eb66d
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_phy: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-phy";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 9 0>;
+			enable-active-high;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x80000000
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x80000000
+			MX25_PAD_D7__D7			0x80000000
+			MX25_PAD_D6__D6			0x80000000
+			MX25_PAD_D5__D5			0x80000000
+			MX25_PAD_D4__D4			0x80000000
+			MX25_PAD_D3__D3			0x80000000
+			MX25_PAD_D2__D2			0x80000000
+			MX25_PAD_D1__D1			0x80000000
+			MX25_PAD_D0__D0			0x80000000
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
new file mode 100644
index 000000000..fb66884d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25.dtsi"
+
+/ {
+	model = "Freescale i.MX25 Product Development Kit";
+	compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 3 0>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_can_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 6 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx25-pdk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx25-pdk-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	wvga: display {
+		model = "CLAA057VC01CW";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&wvga_timings>;
+			wvga_timings: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <45>;
+				hfront-porch = <114>;
+				hsync-len = <1>;
+				vback-porch = <33>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+				clock-frequency = <25200000>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 129>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	imx25-pdk {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_RW__AUD4_TXFS			0xe0
+				MX25_PAD_OE__AUD4_TXC			0xe0
+				MX25_PAD_EB0__AUD4_TXD			0xe0
+				MX25_PAD_EB1__AUD4_RXD			0xe0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX25_PAD_GPIO_A__CAN1_TX		0x0
+				MX25_PAD_GPIO_B__CAN1_RX		0x0
+				MX25_PAD_D14__GPIO_4_6 			0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+				MX25_PAD_A17__GPIO_2_3			0x80000000
+				MX25_PAD_D12__GPIO_4_8			0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
+				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
+				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
+				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
+				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
+				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
+				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
+				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0		0xe0
+				MX25_PAD_LD1__LD1		0xe0
+				MX25_PAD_LD2__LD2		0xe0
+				MX25_PAD_LD3__LD3		0xe0
+				MX25_PAD_LD4__LD4		0xe0
+				MX25_PAD_LD5__LD5		0xe0
+				MX25_PAD_LD6__LD6		0xe0
+				MX25_PAD_LD7__LD7		0xe0
+				MX25_PAD_LD8__LD8		0xe0
+				MX25_PAD_LD9__LD9		0xe0
+				MX25_PAD_LD10__LD10		0xe0
+				MX25_PAD_LD11__LD11		0xe0
+				MX25_PAD_LD12__LD12		0xe0
+				MX25_PAD_LD13__LD13		0xe0
+				MX25_PAD_LD14__LD14		0xe0
+				MX25_PAD_LD15__LD15		0xe0
+				MX25_PAD_GPIO_E__LD16		0xe0
+				MX25_PAD_GPIO_F__LD17		0xe0
+				MX25_PAD_HSYNC__HSYNC		0xe0
+				MX25_PAD_VSYNC__VSYNC		0xe0
+				MX25_PAD_LSCLK__LSCLK		0xe0
+				MX25_PAD_OE_ACD__OE_ACD		0xe0
+				MX25_PAD_CONTRAST__CONTRAST	0xe0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&wvga>;
+	fsl,lpccr = <0x00a903ff>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+};
+
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
+			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x0, 0x3, KEY_HOME)
+			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
+			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
+			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
+			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
+			MATRIX_KEY(0x2, 0x0, KEY_F6)
+			MATRIX_KEY(0x2, 0x1, KEY_F8)
+			MATRIX_KEY(0x2, 0x2, KEY_F9)
+			MATRIX_KEY(0x2, 0x3, KEY_F10)
+			MATRIX_KEY(0x3, 0x0, KEY_F1)
+			MATRIX_KEY(0x3, 0x1, KEY_F2)
+			MATRIX_KEY(0x3, 0x2, KEY_F3)
+			MATRIX_KEY(0x3, 0x2, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&tsc {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	status = "okay";
+};
+
+&usbotg {
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
new file mode 100644
index 000000000..f984b702e
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -0,0 +1,652 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
+
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
+#define MX25_PAD_EB1__CSPI3_SS1			0x044 0x25c 0x4c0 0x06 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
+
+#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
+#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
+#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
+
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
+#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
+#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__CSPI1_SS3		0x05c 0x26c 0x490 0x01 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
+
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
+#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
+
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
+#define MX25_PAD_LBA__CSPI3_RDY			0x064 0x274 0x4b0 0x06 0x000
+
+#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
+
+#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+#define MX25_PAD_D15__ESDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
+
+#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+#define MX25_PAD_D14__ESDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
+
+#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+#define MX25_PAD_D13__ESDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
+
+#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+#define MX25_PAD_D12__ESDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
+
+#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+#define MX25_PAD_D11__USBOTG_PWR		0x098 0x290 0x000 0x06 0x000
+
+#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
+
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
+
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
+
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
+
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
+
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
+
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
+
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
+
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_LD8__ESDHC2_CMD		0x0e8 0x2e0 0x4e0 0x16 0x000
+
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
+#define MX25_PAD_LD9__ESDHC2_CLK		0x0ec 0x2e4 0x4dc 0x06 0x000
+
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
+#define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
+#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
+
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
+#define MX25_PAD_LD11__ESDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
+
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
+#define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
+#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
+
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
+#define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
+#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
+
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
+#define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
+
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
+#define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
+
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
+
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
+
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
+#define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__GPT4_CAPIN1		0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__CSPI2_SS1		0x118 0x310 0x4a8 0x02 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
+
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
+#define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x4b8 0x07 0x001
+
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
+#define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
+#define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x4ac 0x07 0x001
+
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
+#define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x4b0 0x07 0x001
+
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_CSI_D6__ESDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
+#define MX25_PAD_CSI_D6__CSPI3_SS0		0x130 0x328 0x4bc 0x07 0x001
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__ESDHC2_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D7__CSPI3_SS1		0x134 0x32c 0x4c0 0x07 0x001
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3	0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
+#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
+#define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x00 0x000
+#define MX25_PAD_UART1_TXD__UART2_DSR		0x174 0x36c 0x000 0x03 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x00 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x01 0x001
+#define MX25_PAD_UART1_RTS__GPT3_CAPIN1		0x178 0x370 0x000 0x02 0x000
+#define MX25_PAD_UART1_RTS__UART2_DCD		0x178 0x370 0x000 0x03 0x000
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x00 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x01 0x001
+#define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
+#define MX25_PAD_UART2_RTS__GPT1_CAPIN1		0x188 0x380 0x000 0x03 0x000
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
+#define MX25_PAD_UART2_RTS__CSPI2_SS3		0x188 0x380 0x000 0x06 0x000
+
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
+#define MX25_PAD_UART2_CTS__CSPI3_SS3		0x18c 0x384 0x4c8 0x06 0x001
+
+/*
+ * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the ESDHCn_CMD function doesn't enable the input path
+ * for this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
+#define MX25_PAD_SD1_CMD__ESDHC1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_CLK__ESDHC1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__CSPI2_RDY		0x19c 0x394 0x498 0x01 0x001
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__CSPI2_SS0		0x1a0 0x398 0x4a4 0x01 0x001
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__CSPI2_SS1		0x1a4 0x39c 0x4a8 0x01 0x001
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
+#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW1__UART3_TXD		0x1ac 0x3a4 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW1__UART1_DSR		0x1ac 0x3a4 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW2__UART3_RTS		0x1b0 0x3a8 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x03 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW3__UART3_CTS		0x1b4 0x3ac 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x03 0x002
+#define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_FEC_MDC__ESDHC2_CMD		0x1c8 0x3c0 0x4e0 0x11 0x002
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_TX but that's wrong.
+ */
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_RX but that's wrong.
+ */
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
+
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
+
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__GPT2_CAPIN1		0x1fc 0x3f8 0x000 0x04 0x000
+#define MX25_PAD_GPIO_C__CSPI1_SS2		0x1fc 0x3f8 0x000 0x05 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
+#define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
+#define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
+
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
+#define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
+
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__CSPI1_SS3		0x218 0x40c 0x490 0x02 0x001
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
+
+/*
+ * Compatibility defines for out-of-tree users. You should update if you make
+ * use of one of them.
+ */
+#define MX25_PAD_D15__SDHC1_DAT7		MX25_PAD_D15__ESDHC1_DAT7
+#define MX25_PAD_D14__SDHC1_DAT6		MX25_PAD_D14__ESDHC1_DAT6
+#define MX25_PAD_D13__SDHC1_DAT5		MX25_PAD_D13__ESDHC1_DAT5
+#define MX25_PAD_D12__SDHC1_DAT4		MX25_PAD_D12__ESDHC1_DAT4
+#define MX25_PAD_LD8__SDHC2_CMD			MX25_PAD_LD8__ESDHC2_CMD
+#define MX25_PAD_LD9__SDHC2_CLK			MX25_PAD_LD9__ESDHC2_CLK
+#define MX25_PAD_LD11__SDHC2_DAT1		MX25_PAD_LD11__ESDHC2_DAT1
+#define MX25_PAD_CSI_D6__SDHC2_CMD		MX25_PAD_CSI_D6__ESDHC2_CMD
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		MX25_PAD_CSI_D7__ESDHC2_CLK
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		MX25_PAD_CSI_MCLK__ESDHC2_DAT0
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
+#define MX25_PAD_SD1_CMD__SD1_CMD		MX25_PAD_SD1_CMD__ESDHC1_CMD
+#define MX25_PAD_SD1_CLK__SD1_CLK		MX25_PAD_SD1_CLK__ESDHC1_CLK
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		MX25_PAD_SD1_DATA0__ESDHC1_DAT0
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		MX25_PAD_SD1_DATA1__ESDHC1_DAT1
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		MX25_PAD_SD1_DATA2__ESDHC1_DAT2
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		MX25_PAD_SD1_DATA3__ESDHC1_DAT3
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
new file mode 100644
index 000000000..d24b1da18
--- /dev/null
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx25-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
+		usb0 = &usbotg;
+		usb1 = &usbhost1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	asic: asic-interrupt-controller@68000000 {
+		compatible = "fsl,imx25-asic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x8000000>;
+	};
+
+	clocks {
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&asic>;
+		ranges;
+
+		bus@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			aips1: bridge@43f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x43f00000 0x4000>;
+			};
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			can1: can@43f88000 {
+				compatible = "fsl,imx25-flexcan";
+				reg = <0x43f88000 0x4000>;
+				interrupts = <43>;
+				clocks = <&clks 75>, <&clks 75>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@43f8c000 {
+				compatible = "fsl,imx25-flexcan";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <44>;
+				clocks = <&clks 76>, <&clks 76>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 120>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 121>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			owire@43f9c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43f9c000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "";
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 78>, <&clks 78>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				clocks = <&clks 102>;
+				clock-names = "";
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx25-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+
+			audmux: audmux@43fb0000 {
+				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+				reg = <0x43fb0000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x40000>;
+			ranges;
+
+			spi3: spi@50004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50004000 0x4000>;
+				interrupts = <0>;
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@50008000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x50008000 0x4000>;
+				interrupts = <5>;
+				clocks = <&clks 123>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 122>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
+				interrupts = <13>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@50014000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50014000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 118>;
+				clock-names = "ipg";
+				dmas = <&sdma 24 1 0>,
+				       <&sdma 25 1 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			esai@50018000 {
+				reg = <0x50018000 0x4000>;
+				interrupts = <7>;
+			};
+
+			uart5: serial@5002c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5002c000 0x4000>;
+				interrupts = <40>;
+				clocks = <&clks 124>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			tscadc: tscadc@50030000 {
+				compatible = "fsl,imx25-tsadc";
+				reg = <0x50030000 0xc>;
+				interrupts = <46>;
+				clocks = <&clks 119>;
+				clock-names = "ipg";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges;
+
+				adc: adc@50030800 {
+					compatible = "fsl,imx25-gcq";
+					reg = <0x50030800 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+
+				tsc: tcq@50030400 {
+					compatible = "fsl,imx25-tcq";
+					reg = <0x50030400 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <0>;
+					fsl,wires = <4>;
+					status = "disabled";
+				};
+			};
+
+			ssi1: ssi@50034000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50034000 0x4000>;
+				interrupts = <12>;
+				clocks = <&clks 117>;
+				clock-names = "ipg";
+				dmas = <&sdma 28 1 0>,
+				       <&sdma 29 1 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx25-fec";
+				reg = <0x50038000 0x4000>;
+				interrupts = <57>;
+				clocks = <&clks 88>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		bus@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			aips2: bridge@53f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x53f00000 0x4000>;
+			};
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx25-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt4: timer@53f84000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f84000 0x4000>;
+				clocks = <&clks 95>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <1>;
+			};
+
+			gpt3: timer@53f88000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f88000 0x4000>;
+				clocks = <&clks 94>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <29>;
+			};
+
+			gpt2: timer@53f8c000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f8c000 0x4000>;
+				clocks = <&clks 93>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <53>;
+			};
+
+			gpt1: timer@53f90000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				clocks = <&clks 92>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <54>;
+			};
+
+			epit1: timer@53f94000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f94000 0x4000>;
+				clocks = <&clks 83>, <&clks 43>;
+				clock-names = "ipg", "per";
+				interrupts = <28>;
+			};
+
+			epit2: timer@53f98000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f98000 0x4000>;
+				clocks = <&clks 84>, <&clks 43>;
+				clock-names = "ipg", "per";
+				interrupts = <27>;
+			};
+
+			gpio4: gpio@53f9c000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm2: pwm@53fa0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fa0000 0x4000>;
+				clocks = <&clks 106>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <36>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <16>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm3: pwm@53fa8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fa8000 0x4000>;
+				clocks = <&clks 107>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <41>;
+			};
+
+			scc: crypto@53fac000 {
+				compatible = "fsl,imx25-scc";
+				reg = <0x53fac000 0x4000>;
+				clocks = <&clks 111>;
+				clock-names = "ipg";
+				interrupts = <49>, <50>;
+				interrupt-names = "scm", "smn";
+			};
+
+			rngb: rngb@53fb0000 {
+				compatible = "fsl,imx25-rngb";
+				reg = <0x53fb0000 0x4000>;
+				clocks = <&clks 109>;
+				interrupts = <22>;
+			};
+
+			esdhc1: mmc@53fb4000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: mmc@53fb8000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			slcdc@53fc0000 {
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <38>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@53fc8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fc8000 0x4000>;
+				clocks = <&clks 108>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <42>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx25-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 112>, <&clks 68>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
+			};
+
+			wdog@53fdc000 {
+				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 126>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			pwm1: pwm@53fe0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <3>;
+				reg = <0x53fe0000 0x4000>;
+				clocks = <&clks 105>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <26>;
+			};
+
+			iim: efuse@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				maximum-speed = "full-speed";
+				phy_type = "serial";
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx25-usbmisc";
+				reg = <0x53ff4600 0x00f>;
+			};
+
+			dryice@53ffc000 {
+				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				reg = <0x53ffc000 0x4000>;
+				clocks = <&clks 81>;
+				clock-names = "ipg";
+				interrupts = <25 56>;
+			};
+		};
+
+		iram: sram@78000000 {
+			compatible = "mmio-sram";
+			reg = <0x78000000 0x20000>;
+		};
+
+		emi@80000000 {
+			compatible = "fsl,emi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3b002000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				compatible = "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 50>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644
index 000000000..745d5d409
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Armadeus Systems APF27 module";
+	compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x04000000>;
+	};
+};
+
+&clk_osc26m {
+	clock-frequency = <0>;
+};
+
+&iomuxc {
+	imx27-apf27 {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "env2";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "firmware";
+		reg = <0x200000 0x80000>;
+	};
+
+	partition@280000 {
+		label = "dtb";
+		reg = <0x280000 0x80000>;
+	};
+
+	partition@300000 {
+		label = "kernel";
+		reg = <0x300000 0x500000>;
+	};
+
+	partition@800000 {
+		label = "rootfs";
+		reg = <0x800000 0xf800000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
new file mode 100644
index 000000000..6f1e8ce9e
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF27Dev is a docking board for the APF27 SOM */
+#include "imx27-apf27.dts"
+
+/ {
+	model = "Armadeus Systems APF27Dev docking/development board";
+	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
+
+	display: display {
+		model = "Chimei-LW700AT9003";
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-key {
+			label = "user";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <276>; /* BTN_EXTRA */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_max5821: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "max5821-reg";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
+	status = "okay";
+
+	adc@0 {
+		compatible = "maxim,max1027";
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max1027>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&cspi2 {
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>,
+		   <&gpio2 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
+	status = "okay";
+};
+
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+
+	max5821@38 {
+		compatible = "maxim,max5821";
+		reg = <0x38>;
+		vref-supply = <&reg_max5821>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-apf27dev {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi1_cs: cspi1csgrp {
+			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+		};
+
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi2_cs: cspi2csgrp {
+			fsl,pins = <
+				MX27_PAD_CSI_D5__GPIO2_17 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_max1027: max1027 {
+			 fsl,pins = <
+				 MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
+				 MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
+			>;
+		};
+
+		pinctrl_pwm: pwmgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__PWMO 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+			>;
+		};
+
+		pinctrl_sdhc2_cd: sdhc2cdgrp {
+			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+		};
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 000000000..74110bbcd
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clk14745600: clk-uart {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 000000000..9c3ec82ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846@0 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
new file mode 100644
index 000000000..35123b7cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Freescale i.MX27 Product Development Kit";
+	compatible = "fsl,imx27-pdk", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&cspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			gpo3_reg: gpo3 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+	>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	fsl,usbphy = <&usbphy0>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-pdk {
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
+				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB	0x0
+				MX27_PAD_NFCLE__NFCLE	0x0
+				MX27_PAD_NFWP_B__NFWP_B	0x0
+				MX27_PAD_NFCE_B__NFCE_B	0x0
+				MX27_PAD_NFALE__NFALE	0x0
+				MX27_PAD_NFRE_B__NFRE_B	0x0
+				MX27_PAD_NFWE_B__NFWE_B	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 000000000..188639738
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ */
+
+#include "imx27-phytec-phycard-s-som.dtsi"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000..303f92020
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
new file mode 100644
index 000000000..344e77790
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+
+#include "imx27-phytec-phycore-som.dtsi"
+
+/ {
+	model = "Phytec pcm970";
+	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display0: LQ035Q7 {
+		model = "Sharp-LQ035Q7";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf00080c0>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 240x320 {
+				clock-frequency = <5500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hback-porch = <5>;
+				hsync-len = <7>;
+				hfront-porch = <16>;
+				vback-porch = <7>;
+				vsync-len = <1>;
+				vfront-porch = <9>;
+				pixelclk-active = <1>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_csien>;
+			reg = <2>;
+			regulator-name = "CSI_EN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			regulator-always-on;
+		};
+	};
+
+	usbphy {
+		usbphy2: usbphy@2 {
+			compatible = "usb-nop-xceiv";
+			reg = <2>;
+			vcc-supply = <&reg_5v0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	display = <&display0>;
+	lcd-supply = <&reg_5v0>;
+	fsl,dmacr = <0x00020010>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	camgpio: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_rdk {
+		pinctrl_csien: csiengrp {
+			fsl,pins = <
+				MX27_PAD_USB_OC_B__GPIO2_24 0x0
+			>;
+		};
+
+		pinctrl_cspi1cs1: cspi1cs1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			/* Add pullup to DATA line */
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA	0x1
+				MX27_PAD_I2C_CLK__I2C_CLK	0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
+				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+				MX27_PAD_USBH2_STP__USBH2_STP 0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
+				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&pmicleds {
+	ledr1: led@3 {
+		reg = <3>;
+		label = "system:red1:user";
+	};
+
+	ledg1: led@4 {
+		reg = <4>;
+		label = "system:green1:user";
+	};
+
+	ledb1: led@5 {
+		reg = <5>;
+		label = "system:blue1:user";
+	};
+
+	ledr2: led@6 {
+		reg = <6>;
+		label = "system:red2:user";
+	};
+
+	ledg2: led@7 {
+		reg = <7>;
+		label = "system:green2:user";
+	};
+
+	ledb2: led@8 {
+		reg = <8>;
+		label = "system:blue2:user";
+	};
+
+	ledr3: led@9 {
+		reg = <9>;
+		label = "system:red3:nand";
+		linux,default-trigger = "nand-disk";
+	};
+
+	ledg3: led@10 {
+		reg = <10>;
+		label = "system:green3:live";
+		linux,default-trigger = "heartbeat";
+	};
+
+	ledb3: led@11 {
+		reg = <11>;
+		label = "system:blue3:cpu";
+		linux,default-trigger = "cpu0";
+	};
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vmmc1_reg>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	vbus-supply = <&reg_5v0>;
+	fsl,usbphy = <&usbphy2>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+
+	can@4,0 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..3d1027317
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5v0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			vcc-supply = <&sw3_reg>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+			#phy-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
+	};
+
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		pmicleds: leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+		};
+
+		regulators {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbphy0>;
+	vbus-supply = <&sw3_reg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@1,0 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
new file mode 100644
index 000000000..1514d80a3
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -0,0 +1,474 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - C_IN
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
+#define MX27_PAD_LD0__LD0                                  0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
+#define MX27_PAD_LD1__LD1                                  0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
+#define MX27_PAD_LD2__LD2                                  0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
+#define MX27_PAD_LD3__LD3                                  0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
+#define MX27_PAD_LD4__LD4                                  0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
+#define MX27_PAD_LD5__LD5                                  0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
+#define MX27_PAD_LD6__LD6                                  0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
+#define MX27_PAD_LD7__LD7                                  0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
+#define MX27_PAD_LD8__LD8                                  0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
+#define MX27_PAD_LD9__LD9                                  0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
+#define MX27_PAD_LD10__LD10                                0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
+#define MX27_PAD_LD11__LD11                                0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
+#define MX27_PAD_LD12__LD12                                0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
+#define MX27_PAD_LD13__LD13                                0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
+#define MX27_PAD_LD14__LD14                                0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
+#define MX27_PAD_LD15__LD15                                0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
+#define MX27_PAD_LD16__LD16                                0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
+#define MX27_PAD_LD17__LD17                                0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
+#define MX27_PAD_REV__REV                                  0x18 0x004
+#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
+#define MX27_PAD_CLS__CLS                                  0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
+#define MX27_PAD_PS__PS                                    0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
+#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
+#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
+#define MX27_PAD_TIN__TIN                                  0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
+#define MX27_PAD_PWMO__PWMO                                0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
+#define MX27_PAD_RTCK__RTCK                                0x90 0x004
+#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
+#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
+#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
+#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
new file mode 100644
index 000000000..7bc132737
--- /dev/null
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
+
+#include "imx27-pinfunc.h"
+
+#include <dt-bindings/clock/imx27-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+		spi2 = &cspi3;
+	};
+
+	aitc: aitc-interrupt-controller@10040000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x10040000 0x1000>;
+	};
+
+	clocks {
+		clk_osc26m: osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX27_CLK_CPU_DIV>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi@10000000 { /* AIPI1 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10000000 0x20000>;
+			ranges;
+
+			dma: dma@10001000 {
+				compatible = "fsl,imx27-dma";
+				reg = <0x10001000 0x1000>;
+				interrupts = <32>;
+				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
+					 <&clks IMX27_CLK_DMA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+				#dma-channels = <16>;
+			};
+
+			wdog: wdog@10002000 {
+				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
+				reg = <0x10002000 0x1000>;
+				interrupts = <27>;
+				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
+			};
+
+			gpt1: timer@10003000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10003000 0x1000>;
+				interrupts = <26>;
+				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@10004000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10004000 0x1000>;
+				interrupts = <25>;
+				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@10005000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10005000 0x1000>;
+				interrupts = <24>;
+				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm: pwm@10006000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx27-pwm";
+				reg = <0x10006000 0x1000>;
+				interrupts = <23>;
+				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
+				status = "disabled";
+			};
+
+			uart1: serial@1000a000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000a000 0x1000>;
+				interrupts = <20>;
+				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@1000b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000b000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@1000c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000c000 0x1000>;
+				interrupts = <18>;
+				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@1000d000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000d000 0x1000>;
+				interrupts = <17>;
+				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi1: spi@1000e000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000e000 0x1000>;
+				interrupts = <16>;
+				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi2: spi@1000f000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000f000 0x1000>;
+				interrupts = <15>;
+				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ssi1: ssi@10010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10010000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
+				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@10011000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10011000 0x1000>;
+				interrupts = <13>;
+				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
+				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@10012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x10012000 0x1000>;
+				interrupts = <12>;
+				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci1: mmc@10013000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10013000 0x1000>;
+				interrupts = <11>;
+				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: mmc@10014000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10014000 0x1000>;
+				interrupts = <10>;
+				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@10015000 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015000 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@10015100 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015100 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@10015200 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015200 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@10015300 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015300 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio5: gpio@10015400 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015400 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio6: gpio@10015500 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015500 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks IMX27_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			cspi3: spi@10017000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x10017000 0x1000>;
+				interrupts = <6>;
+				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: timer@10019000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x10019000 0x1000>;
+				interrupts = <4>;
+				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@1001a000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x1001a000 0x1000>;
+				interrupts = <3>;
+				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			uart5: serial@1001b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001b000 0x1000>;
+				interrupts = <49>;
+				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@1001c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001c000 0x1000>;
+				interrupts = <48>;
+				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@1001d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x1001d000 0x1000>;
+				interrupts = <1>;
+				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci3: mmc@1001e000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x1001e000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 36>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			gpt6: timer@1001f000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+				reg = <0x1001f000 0x1000>;
+				interrupts = <2>;
+				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+		};
+
+		aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
+					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
+					 <&clks IMX27_CLK_PER3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			coda: coda@10023000 {
+				compatible = "fsl,imx27-vpu", "cnm,codadx6";
+				reg = <0x10023000 0x0200>;
+				interrupts = <53>;
+				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
+					 <&clks IMX27_CLK_VPU_AHB_GATE>;
+				clock-names = "per", "ahb";
+				iram = <&iram>;
+			};
+
+			usbotg: usb@10024000 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024000 0x200>;
+				interrupts = <56>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@10024200 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024200 0x200>;
+				interrupts = <54>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@10024400 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024400 0x200>;
+				interrupts = <55>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@10024600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx27-usbmisc";
+				reg = <0x10024600 0x200>;
+			};
+
+			sahara2: crypto@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+
+			clks: ccm@10027000{
+				compatible = "fsl,imx27-ccm";
+				reg = <0x10027000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iim: efuse@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
+			};
+
+			fec: ethernet@1002b000 {
+				compatible = "fsl,imx27-fec";
+				reg = <0x1002b000 0x1000>;
+				interrupts = <50>;
+				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
+					 <&clks IMX27_CLK_FEC_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		nfc: nand-controller@d8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-nand";
+			reg = <0xd8000000 0x1000>;
+			interrupts = <29>;
+			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
+			status = "disabled";
+		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: sram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
new file mode 100644
index 000000000..14a92fe59
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+
+				partition@300000 {
+					label = "env";
+					reg = <0x300000 0x80000>;
+				};
+
+				partition@380000 {
+					label = "env2";
+					reg = <0x380000 0x80000>;
+				};
+
+				partition@400000 {
+					label = "dtb";
+					reg = <0x400000 0x80000>;
+				};
+
+				partition@480000 {
+					label = "splash";
+					reg = <0x480000 0x80000>;
+				};
+
+				partition@500000 {
+					label = "kernel";
+					reg = <0x500000 0x800000>;
+				};
+
+				partition@d00000 {
+					label = "rootfs";
+					reg = <0xd00000 0xf300000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
new file mode 100644
index 000000000..1b253b470
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+#include "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_apf28dev>;
+
+				hog_pins_apf28dev: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_otg_apf28dev: otg-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_16bit_pins_a
+						&lcdif_pins_apf28dev>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <16>;
+					bus-width = <16>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33000033>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <96>;
+							hfront-porch = <96>;
+							vback-porch = <20>;
+							vfront-porch = <21>;
+							hsync-len = <64>;
+							vsync-len = <4>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				xceiver-supply = <&reg_can0_vcc>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				uart-has-rtscts;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_apf28dev
+					&usb0_id_pins_b>;
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 23 1>;
+			enable-active-high;
+		};
+
+		reg_can0_vcc: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "can0_vcc";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
new file mode 100644
index 000000000..b86be3204
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_apx4: lcdif-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_apx4>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <88>;
+							hfront-porch = <40>;
+							vback-porch = <32>;
+							vfront-porch = <13>;
+							hsync-len = <48>;
+							vsync-len = <3>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					#sound-dai-cells = <0>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				pcf8563: rtc@51 {
+					compatible = "phg,pcf8563";
+					reg = <0x51>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&usb1_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+		      status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
new file mode 100644
index 000000000..85aa1cc3f
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				ssd1306_cfa10036: ssd1306-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_cfa10036: leds-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_otg_cfa10036: otg-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c3 /*
+						MX28_PAD_PWM3__GPIO_3_28 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_b>;
+				clock-frequency = <400000>;
+				status = "okay";
+
+				ssd1306: oled@3c {
+					compatible = "solomon,ssd1306fb-i2c";
+					pinctrl-names = "default";
+					pinctrl-0 = <&ssd1306_cfa10036>;
+					reg = <0x3c>;
+					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+					solomon,height = <32>;
+					solomon,width = <128>;
+					solomon,page-offset = <0>;
+					solomon,com-lrremap;
+					solomon,com-invdir;
+					solomon,com-offset = <32>;
+				};
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_cfa10036>;
+			dr_mode = "peripheral";
+			phy_type = "utmi";
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
new file mode 100644
index 000000000..d3e9a7315
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10037 Board";
+	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10037: usb-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10037: mac0-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
new file mode 100644
index 000000000..a92b05ef3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10049: usb-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2cmux_pins_cfa10049: i2cmux-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10049: mac0-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pca_pins_cfa10049: pca-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_pins_cfa10049: rotary-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi2_pins_cfa10049: spi2-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_cfa10049: spi3-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				w1_gpio_pins: w1-gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D21__GPIO_1_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+					     &lcdif_pins_cfa10049
+					     &lcdif_pins_cfa10049_pullup>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10049>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10049>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10049>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+		};
+	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		gpio-sck = <&gpio0 24 0>;
+		gpio-mosi = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
+
+		rotary_button {
+			label = "rotary_button";
+			gpios = <&gpio3 26 1>;
+			debounce-interval = <10>;
+			linux,code = <28>;
+		};
+	};
+
+	rotary {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
+		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+		linux,axis = <1>; /* REL_Y */
+		rotary-encoder,relative-axis;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
new file mode 100644
index 000000000..d05c370df
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10055: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+					     &lcdif_pins_cfa10055
+					     &lcdif_pins_cfa10055_pullup>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
new file mode 100644
index 000000000..c1060bd5f
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10056: spi2-cfa10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_pins_cfa10056: lcdif-10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						&lcdif_pins_cfa10056
+						&lcdif_pins_cfa10056_pullup >;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <32000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <5>;
+							vsync-len = <5>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
new file mode 100644
index 000000000..2f7e479db
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10057: usb-10057@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10057: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+					     &lcdif_pins_cfa10057>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hfront-porch = <12>;
+							hback-porch = <2>;
+							vfront-porch = <5>;
+							vback-porch = <3>;
+							hsync-len = <2>;
+							vsync-len = <2>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
new file mode 100644
index 000000000..4465fd867
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10058: usb-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10058: lcdif-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						 &lcdif_pins_cfa10058>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <40>;
+							hfront-porch = <40>;
+							vback-porch = <13>;
+							vfront-porch = <29>;
+							hsync-len = <8>;
+							vsync-len = <8>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10058>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
new file mode 100644
index 000000000..d451fa018
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2 485";
+	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+				non-removable;
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_b
+					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_reset_pin: mac0-phy-reset@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_int_pin: mac0-phy-int@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins: leds@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__GPIO_3_20
+						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+			dr_mode = "peripheral";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <25>;
+			phy-handle = <&ethphy>;
+			status = "okay";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&mac0_phy_int_pin>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+					max-speed = <100>;
+				};
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		rs485-red {
+			label = "duckbill:red:rs485";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		rs485-green {
+			label = "duckbill:green:rs485";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
new file mode 100644
index 000000000..bacb846f9
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2 EnOcean";
+	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+				non-removable;
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_b
+					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_reset_pin: mac0-phy-reset@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_int_pin: mac0-phy-int@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins: leds@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__GPIO_3_20
+						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+						MX28_PAD_AUART0_CTS__GPIO_3_2
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				enocean_button: enocean-button@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RTS__GPIO_3_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+			dr_mode = "peripheral";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <25>;
+			phy-handle = <&ethphy>;
+			status = "okay";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&mac0_phy_int_pin>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+					max-speed = <100>;
+				};
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		enocean-blue {
+			label = "duckbill:blue:enocean";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-red {
+			label = "duckbill:red:enocean";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-green {
+			label = "duckbill:green:enocean";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&enocean_button>;
+
+		enocean {
+			label = "EnOcean";
+			linux,code = <KEY_NEW>;
+			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
new file mode 100644
index 000000000..0e8be5975
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2 SPI";
+	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+	aliases {
+		ethernet1 = &qca7000;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+				non-removable;
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				qca7000: ethernet@0 {
+					reg = <0>;
+					compatible = "qca,qca7000";
+					pinctrl-names = "default";
+					pinctrl-0 = <&qca7000_pins>;
+					interrupt-parent = <&gpio3>;
+					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+					spi-cpha;
+					spi-cpol;
+					spi-max-frequency = <8000000>;
+				};
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_reset_pin: mac0-phy-reset@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_int_pin: mac0-phy-int@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins: led@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__GPIO_3_20
+						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				qca7000_pins: qca7000@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+			dr_mode = "peripheral";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <25>;
+			phy-handle = <&ethphy>;
+			status = "okay";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&mac0_phy_int_pin>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+					max-speed = <100>;
+				};
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
new file mode 100644
index 000000000..23fd30364
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2";
+	compatible = "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+				non-removable;
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_b
+					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_reset_pin: mac0-phy-reset@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_int_pin: mac0-phy-int@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins: leds@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__GPIO_3_20
+						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+			dr_mode = "peripheral";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <25>;
+			phy-handle = <&ethphy>;
+			status = "okay";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&mac0_phy_int_pin>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+					max-speed = <100>;
+				};
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
new file mode 100644
index 000000000..c666afb12
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_phy_reset_pin: mac0-phy-reset@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins: leds@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+			dr_mode = "peripheral";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <25>;
+			status = "okay";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 000000000..29f8a3a24
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 000000000..cd875ace1
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 000000000..3280fddaa
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	button-sw3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	button-sw4 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
new file mode 100644
index 000000000..1053b7c58
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+					     &gpmi_pins_evk>;
+				status = "okay";
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio2 12 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp1: spi@80012000 {
+				compatible = "fsl,imx28-mmc";
+				bus-width = <8>;
+				wp-gpios = <&gpio0 28 0>;
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "sst,sst25vf016b", "jedec,spi-nor";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio3_5: led_gpio3_5@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_evk: gpmi-nand-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_evk: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_evk>;
+				status = "okay";
+
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
+					};
+				};
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+				fsl,ave-ctrl = <4>;
+				fsl,ave-delay = <2>;
+				fsl,settling = <10>;
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					#sound-dai-cells = <0>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				at24@51 {
+					compatible = "atmel,24c32";
+					pagesize = <32>;
+					reg = <0x51>;
+				};
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				uart-has-rtscts;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_fec_3v3>;
+			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
new file mode 100644
index 000000000..2bdb4c093
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@68 {
+					compatible = "st,m41t62";
+					reg = <0x68>;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
new file mode 100644
index 000000000..865ac3d57
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			nand-controller@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg_a>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
new file mode 100644
index 000000000..13acdc791
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28-m28.dtsi"
+
+/ {
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio3 10 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p80", "jedec,spi-nor";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <16>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33260000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <0>;
+							hfront-porch = <256>;
+							vback-porch = <0>;
+							vfront-porch = <45>;
+							hsync-len = <1>;
+							vsync-len = <1>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				sgtl5000: codec@a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					#sound-dai-cells = <0>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				eeprom: eeprom@51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <32>;
+				};
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_pins_a>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb1_pins_a>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	regulators {
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
new file mode 100644
index 000000000..e11f69ba0
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
new file mode 100644
index 000000000..90928db0d
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+			};
+
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "everspin,mr25h256", "mr25h256";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c64";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_pins_b>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
new file mode 100644
index 000000000..097ec35c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+	model = "Technologic Systems i.MX28 TS-4600";
+	compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;   /* 256MB */
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_sck_cfg
+					     &en_sd_pwr>;
+				broken-cd = <1>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+
+				en_sd_pwr: en-sd-pwr@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__GPIO_3_28
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
new file mode 100644
index 000000000..164254c28
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -0,0 +1,749 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Ka-Ro electronics TX28 module";
+	compatible = "karo,tx28", "fsl,imx28";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display0;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		reg_can_xcvr = &reg_can_xcvr;
+		spi_gpio = &spi_gpio;
+		spi_mxs = &ssp3;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>; /* will be filled in by U-Boot */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+	};
+
+	reg_lcd: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 GPIO_ACTIVE_HIGH
+			&gpio5 1 GPIO_ACTIVE_HIGH
+			&gpio5 2 GPIO_ACTIVE_HIGH
+			&gpio5 3 GPIO_ACTIVE_HIGH
+		>;
+		row-gpios = <
+			&gpio5 4 GPIO_ACTIVE_HIGH
+			&gpio5 5 GPIO_ACTIVE_HIGH
+			&gpio5 6 GPIO_ACTIVE_HIGH
+			&gpio5 7 GPIO_ACTIVE_HIGH
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		wakeup-source;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+
+	spi_gpio: spi-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_spi_gpio_pins>;
+
+		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <3>;
+		cs-gpios = <
+			&gpio2 27 GPIO_ACTIVE_LOW
+			&gpio3 8 GPIO_ACTIVE_LOW
+			&gpio3 9 GPIO_ACTIVE_LOW
+		>;
+		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
+		status = "disabled";
+
+		spi@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <57600000>;
+		};
+
+		spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <57600000>;
+		};
+
+		spi@2 {
+			compatible = "spidev";
+			reg = <2>;
+			spi-max-frequency = <57600000>;
+		};
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 IRQ_TYPE_NONE>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_spi_gpio_pins: spi-gpiogrp@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+			MX28_PAD_SSP3_MOSI__GPIO_2_25
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SS0__GPIO_2_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spi@2 {
+		compatible = "spidev";
+		reg = <2>;
+		spi-max-frequency = <57600000>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
new file mode 100644
index 000000000..6cab8b66d
--- /dev/null
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -0,0 +1,1330 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc: hsadc@80002000 {
+				reg = <0x80002000 0x2000>;
+				interrupts = <13>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dma_apbh: dma-controller@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+						  "hsadc", "lcdif", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 25>;
+			};
+
+			perfmon: perfmon@80006000 {
+				reg = <0x80006000 0x800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			gpmi: nand-controller@8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: spi@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
+				interrupts = <96>;
+				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp1: spi@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
+				interrupts = <97>;
+				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp2: spi@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
+				interrupts = <98>;
+				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp3: spi@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
+				interrupts = <99>;
+				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_pins_b: duart@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_4pins_a: duart-4pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_pins_a: auart1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_a: auart2-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_pins_a: auart2-pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_pins_a: auart3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_a: auart3-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac0_pins_b: mac0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_4bit_pins_b: mmc2-4bit@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_b: i2c1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_CTS__I2C1_SCL
+						MX28_PAD_AUART2_RTS__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm0_pins_a: pwm0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__PWM_0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__PWM_2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_b: pwm3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM4__PWM_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_a: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can0_pins_a: can0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can1_pins_a: can1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi3_pins_b: spi3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_pins_a: usb0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_b: usb0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_a: usb1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_id_pins_b: usb0id1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+			};
+
+			digctl: digctl@8001c000 {
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+				reg = <0x8001c000 0x2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm: etm@80022000 {
+				reg = <0x80022000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+						  "saif0", "saif1", "i2c0", "i2c1",
+						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 26>;
+			};
+
+			dcp: crypto@80028000 {
+				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <52 53 54>;
+				status = "okay";
+			};
+
+			pxp: pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@8002c000 {
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8002c000 0x2000>;
+				clocks = <&clks 25>;
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@80030000 {
+				compatible = "fsl,imx28-lcdif";
+				reg = <0x80030000 0x2000>;
+				interrupts = <38>;
+				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80032000 0x2000>;
+				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				compatible = "fsl,imx28-flexcan";
+				reg = <0x80034000 0x2000>;
+				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			simdbg: simdbg@8003c000 {
+				reg = <0x8003c000 0x200>;
+				status = "disabled";
+			};
+
+			simgpmisel: simgpmisel@8003c200 {
+				reg = <0x8003c200 0x100>;
+				status = "disabled";
+			};
+
+			simsspsel: simsspsel@8003c300 {
+				reg = <0x8003c300 0x100>;
+				status = "disabled";
+			};
+
+			simmemsel: simmemsel@8003c400 {
+				reg = <0x8003c400 0x100>;
+				status = "disabled";
+			};
+
+			gpiomon: gpiomon@8003c500 {
+				reg = <0x8003c500 0x100>;
+				status = "disabled";
+			};
+
+			simenet: simenet@8003c700 {
+				reg = <0x8003c700 0x100>;
+				status = "disabled";
+			};
+
+			armjtag: armjtag@8003c800 {
+				reg = <0x8003c800 0x100>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 0x2000>;
+				interrupts = <59>;
+				#clock-cells = <0>;
+				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power: power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 0x2000>;
+				interrupts = <58>;
+				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
+				status = "disabled";
+				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif: spdif@80054000 {
+				reg = <0x80054000 0x2000>;
+				interrupts = <45>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			mxs_rtc: rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x80056000 0x2000>;
+				interrupts = <29>;
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <111>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 0x2000>;
+				interrupts = <110>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
+				status = "disabled";
+			};
+
+			timer: timrot@80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
+			};
+
+			auart0: serial@8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80070000 0x2000>;
+				interrupts = <115>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80072000 0x2000>;
+				interrupts = <116>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			clocks = <&clks 60>;
+			fsl,usbphy = <&usbphy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			clocks = <&clks 61>;
+			fsl,usbphy = <&usbphy1>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		dflpt: dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "disabled";
+		};
+
+		etn_switch: switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
new file mode 100644
index 000000000..d87eee3f9
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ */
+
+/dts-v1/;
+#include "imx31.dtsi"
+
+/ {
+	model = "Buglabs i.MX31 Bug 1.x";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&uart5 {
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts
new file mode 100644
index 000000000..d17abdfb6
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-lite.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+
+/dts-v1/;
+
+#include "imx31.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LogicPD i.MX31 Lite";
+	compatible = "logicpd,imx31-lite", "fsl,imx31";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ata {
+	status = "okay";
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b {		/* NVCC10 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo {		/* NVCC1 and NVCC7 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi {		/* VIOHI */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio {	/* VAUDIO */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vcam {		/* NVCC4 */
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc2 {		/* NVCC3 */
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart3 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x0 0x200000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
+	};
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		reg = <4 0x0 0x100>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
new file mode 100644
index 000000000..0ee7e5547
--- /dev/null
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	avic: interrupt-controller@68000000 {
+		compatible = "fsl,imx31-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x100000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		iram: sram@1fffc000 {
+			compatible = "mmio-sram";
+			reg = <0x1fffc000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1fffc000 0x4000>;
+		};
+
+		bus@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				interrupts = <10>;
+				clocks = <&clks 33>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				interrupts = <3>;
+				clocks = <&clks 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ata: ata@43f8c000 {
+				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <15>;
+				clocks = <&clks 26>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 10>, <&clks 30>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 10>, <&clks 31>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				interrupts = <4>;
+				clocks = <&clks 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x43fa4000 0x4000>;
+				interrupts = <14>;
+				clocks = <&clks 10>, <&clks 53>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 46>;
+				status = "disabled";
+			};
+
+			uart4: serial@43fb0000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb0000 0x4000>;
+				clocks = <&clks 10>, <&clks 49>;
+				clock-names = "ipg", "per";
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			uart5: serial@43fb4000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb4000 0x4000>;
+				interrupts = <47>;
+				clocks = <&clks 10>, <&clks 50>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			sdhci1: mmc@50004000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50004000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 10>, <&clks 20>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 20 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: mmc@50008000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50008000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 10>, <&clks 21>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 21 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 10>, <&clks 48>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 10>, <&clks 54>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			iim: efuse@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+		};
+
+		bus@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
+			spi3: spi@53f84000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <17>;
+				clocks = <&clks 10>, <&clks 28>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 10>, <&clks 22>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rng@53fb0000 {
+				compatible = "fsl,imx31-rnga";
+				reg = <0x53fb0000 0x4000>;
+				interrupts = <22>;
+				clocks = <&clks 29>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx31-sdma";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <34>;
+				clocks = <&clks 10>, <&clks 27>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
+			};
+
+			rtc: rtc@53fd8000 {
+				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
+				reg = <0x53fd8000 0x4000>;
+				interrupts = <25>;
+				clocks = <&clks 2>, <&clks 40>;
+				clock-names = "ref", "ipg";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 41>;
+			};
+
+			pwm: pwm@53fe0000 {
+				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <26>;
+				clocks = <&clks 10>, <&clks 42>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		emi@b8000000 { /* External Memory Interface */
+			compatible = "simple-bus";
+			reg = <0xb8000000 0x5000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nfc: nand@b8000000 {
+				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
+				reg = <0xb8000000 0x1000>;
+				interrupts = <33>;
+				clocks = <&clks 9>;
+				dmas = <&sdma 30 17 0>;
+				dma-names = "rx-tx";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				clocks = <&clks 56>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges = <0 0 0xa0000000 0x08000000
+					  1 0 0xa8000000 0x08000000
+					  2 0 0xb0000000 0x02000000
+					  3 0 0xb2000000 0x02000000
+					  4 0 0xb4000000 0x02000000
+					  5 0 0xb6000000 0x02000000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000..17bd2a976
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX35_PAD_FEC_COL__FEC_COL		0x80000000
+				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+			>;
+		};
+
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000..b1c11170a
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
new file mode 100644
index 000000000..ddce0a844
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx35-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h
new file mode 100644
index 000000000..9d6cc9564
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-pinfunc.h
@@ -0,0 +1,966 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX35_PINFUNC_H
+#define __DTS_IMX35_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
+#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
+#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
+#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
+#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
+#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
+#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
+#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
+#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
+#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
+#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
+#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
+#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
+#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
+#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
+#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
+#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
+#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
+#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
+#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
+#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
+#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
+#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
+#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
+#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
+#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
+#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
+#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
+#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
+#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
+#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
+#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
+#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
+#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
+#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
+#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
+#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
+#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
+#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
+#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
+#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
+#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
+#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
+#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
+#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
+#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
+#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
+#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
+#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
+#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
+#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
+#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
+#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
+#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
+#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
+#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
+#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
+#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
+#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
+#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
+#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
+#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
+#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
+#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
+#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
+#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
+#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
+#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
+#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
+#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
+#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
+#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
+#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
+#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
+#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
+#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
+#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
+#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
+#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
+#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
+#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
+#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
+#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
+#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
+#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
+#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
+#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
+#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
+#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
+#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
+#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
+#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
+#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
+#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
+#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
+#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
+#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
+#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
+#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
+#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
+#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
+#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
+#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
+#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
+#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
+#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
+#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
+#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
+#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
+#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
+#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
+#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
+#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
+#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
+#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
+#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
+#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
+#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
+#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
+#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
+#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
+#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
+#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
+#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
+#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
+#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
+#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
+#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
+#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
+#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
+#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
+#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
+#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
+#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
+#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
+#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
+#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
+#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
+#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
+#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
+#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
+#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
+#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
+#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
+#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
+#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
+#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
+#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
+#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
+#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
+#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
+#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
+#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
+#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
+#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
+#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
+#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
+#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
+#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
+#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
+#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
+#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
+#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
+#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
+#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
+#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
+#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
+#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
+#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
+#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
+#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
+#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
+#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
+#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
+#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
+#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
+#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
+#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
+#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
+#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
+#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
+#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
+#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
+#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
+#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
+#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
+#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
+#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
+#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
+#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
+#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
+#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
+#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
+#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
+#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
+#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
+#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
+#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
+#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
+#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
+#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
+#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
+#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
+#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
+#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
+#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
+#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
+#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
+#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
+#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
+#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
+#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
+#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
+#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
+#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
+#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
+#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
+#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
+#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
+#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
+#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
+#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
+#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
+#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
+#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
+#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
+#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
+#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
+#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
+#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
+#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
+#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
+#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
+#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
+#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
+#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
+#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
+#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
+#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
+#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
+#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
+#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
+#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
+#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
+#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
+#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
+#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
+#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
+#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
+#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
+#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
+#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
+#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
+#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
+#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
+#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
+#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
+#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
+#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
+#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
+#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
+#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
+#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
+#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
+#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
+#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
+#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
+#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
+#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
+#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
+#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
+#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
+#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
+#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
+#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
+#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
+#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
+#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
+#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
+#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
+#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
+#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
+#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
+#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
+#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
+#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
+#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
+#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
+#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
+#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
+#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
+#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
+#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
+#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
+#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
+#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
+#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
+#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
+#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
+#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
+#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
+#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
+#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
+#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
+#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
+#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
+#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
+#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
+#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
+#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
+#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
+#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
+#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
+#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
+#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
+#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
+#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
+#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
+
+#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 000000000..e7c4803ef
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2012 Steffen Trumtrar, Pengutronix
+//
+// based on imx27.dtsi
+
+#include "imx35-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	avic: avic-interrupt-controller@68000000 {
+		compatible = "fsl,imx35-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x10000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		L2: cache-controller@30000000 {
+			compatible = "arm,l210-cache";
+			reg = <0x30000000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips1: bus@43f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "ipg_per";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 53>;
+				clock-names = "ipg_per";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 70>;
+				clock-names = "ipg", "per";
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				clocks = <&clks 9>, <&clks 71>;
+				clock-names = "ipg", "per";
+				interrupts = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 52>;
+				clock-names = "ipg_per";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@43fa0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+				reg = <0x43fa0000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 68>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 35 &clks 35>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 56>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx35-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+		};
+
+		spba: spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				clocks = <&clks 9>, <&clks 72>;
+				clock-names = "ipg", "per";
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			spi2: spi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 36 &clks 36>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			fec: fec@50038000 {
+				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+				reg = <0x50038000 0x4000>;
+				clocks = <&clks 46>, <&clks 8>;
+				clock-names = "ipg", "ahb";
+				interrupts = <57>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@53f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx35-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 9>, <&clks 50>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			esdhc1: mmc@53fb4000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <7>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: mmc@53fb8000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc3: mmc@53fbc000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			audmux: audmux@53fc4000 {
+				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+				reg = <0x53fc4000 0x4000>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 9>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 74>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			can1: can@53fe4000 {
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fe4000 0x1000>;
+				clocks = <&clks 33>, <&clks 33>;
+				clock-names = "ipg", "per";
+				interrupts = <43>;
+				status = "disabled";
+			};
+
+			can2: can@53fe8000 {
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fe8000 0x1000>;
+				clocks = <&clks 34>, <&clks 34>;
+				clock-names = "ipg", "per";
+				interrupts = <44>;
+				status = "disabled";
+			};
+
+			efuse@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx35-usbmisc";
+				reg = <0x53ff4600 0x00f>;
+			};
+		};
+
+		emi@80000000 { /* External Memory Interface */
+			compatible = "fsl,emi", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 29>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&clks 0>;
+				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				ranges = <
+					0 0 0xa0000000 0x8000000
+					1 0 0xa8000000 0x8000000
+					2 0 0xb0000000 0x2000000
+					3 0 0xb2000000 0x2000000
+					4 0 0xb4000000 0x2000000
+					5 0 0xb6000000 0x2000000
+				>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
new file mode 100644
index 000000000..4ea5c23f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx50-evk {
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
new file mode 100644
index 000000000..a0eaf869b
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 Jonathan Neuschäfer
+//
+// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B.
+
+/dts-v1/;
+#include "imx50.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kobo Aura (N514)";
+	compatible = "kobo,aura", "fsl,imx50";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		on {
+			label = "kobo_aura:orange:on";
+			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		hallsensor {
+			label = "Hallsensor";
+			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <EV_SW>;
+		};
+
+		frontlight {
+			label = "Frontlight";
+			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DISPLAYTOGGLE>;
+		};
+	};
+
+	sd2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_reset>;
+		reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	};
+
+	sd2_vmmc: gpio-regulator {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_vmmc>;
+		regulator-name = "vmmc";
+		states = <3300000 0>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+
+	/* External µSD card */
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	disable-wp;
+	mmc-pwrseq = <&sd2_pwrseq>;
+	vmmc-supply = <&sd2_vmmc>;
+	status = "okay";
+
+	/* CyberTan WC121 SDIO WiFi (BCM43362) */
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd3>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <50000000>;
+	disable-wp;
+	status = "okay";
+
+	/* Internal eMMC */
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* TODO: ektf2132 touch controller at 0x15 */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	/* TODO: embedded controller at 0x43 */
+};
+
+&iomuxc {
+	pinctrl_gpiokeys: gpiokeys {
+		fsl,pins = <
+			MX50_PAD_CSPI_MISO__GPIO4_10		0x0
+			MX50_PAD_SD2_D7__GPIO5_15		0x0
+			MX50_PAD_KEY_ROW0__GPIO4_1		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1 {
+		fsl,pins = <
+			MX50_PAD_I2C1_SCL__I2C1_SCL		0x400001fd
+			MX50_PAD_I2C1_SDA__I2C1_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c2: i2c2 {
+		fsl,pins = <
+			MX50_PAD_I2C2_SCL__I2C2_SCL		0x400001fd
+			MX50_PAD_I2C2_SDA__I2C2_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c3: i2c3 {
+		fsl,pins = <
+			MX50_PAD_I2C3_SCL__I2C3_SCL		0x400001fd
+			MX50_PAD_I2C3_SDA__I2C3_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_leds: leds {
+		fsl,pins = <
+			MX50_PAD_PWM1__GPIO6_24			0x0
+		>;
+	};
+
+	pinctrl_sd1: sd1 {
+		fsl,pins = <
+			MX50_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+			MX50_PAD_SD1_CLK__ESDHC1_CLK		0xd4
+			MX50_PAD_SD1_D0__ESDHC1_DAT0		0x1d4
+			MX50_PAD_SD1_D1__ESDHC1_DAT1		0x1d4
+			MX50_PAD_SD1_D2__ESDHC1_DAT2		0x1d4
+			MX50_PAD_SD1_D3__ESDHC1_DAT3		0x1d4
+
+			MX50_PAD_SD2_CD__GPIO5_17		0x0
+		>;
+	};
+
+	pinctrl_sd2: sd2 {
+		fsl,pins = <
+			MX50_PAD_SD2_CMD__ESDHC2_CMD		0x1e4
+			MX50_PAD_SD2_CLK__ESDHC2_CLK		0xd4
+			MX50_PAD_SD2_D0__ESDHC2_DAT0		0x1d4
+			MX50_PAD_SD2_D1__ESDHC2_DAT1		0x1d4
+			MX50_PAD_SD2_D2__ESDHC2_DAT2		0x1d4
+			MX50_PAD_SD2_D3__ESDHC2_DAT3		0x1d4
+		>;
+	};
+
+	pinctrl_sd2_reset: sd2-reset {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_MOSI__GPIO4_17		0x0
+		>;
+	};
+
+	pinctrl_sd2_vmmc: sd2-vmmc {
+		fsl,pins = <
+			MX50_PAD_ECSPI1_SCLK__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_sd3: sd3 {
+		fsl,pins = <
+			MX50_PAD_SD3_CMD__ESDHC3_CMD		0x1e4
+			MX50_PAD_SD3_CLK__ESDHC3_CLK		0xd4
+			MX50_PAD_SD3_D0__ESDHC3_DAT0		0x1d4
+			MX50_PAD_SD3_D1__ESDHC3_DAT1		0x1d4
+			MX50_PAD_SD3_D2__ESDHC3_DAT2		0x1d4
+			MX50_PAD_SD3_D3__ESDHC3_DAT3		0x1d4
+			MX50_PAD_SD3_D4__ESDHC3_DAT4		0x1d4
+			MX50_PAD_SD3_D5__ESDHC3_DAT5		0x1d4
+			MX50_PAD_SD3_D6__ESDHC3_DAT6		0x1d4
+			MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4
+		>;
+	};
+
+	pinctrl_uart2: uart2 {
+		fsl,pins = <
+			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4
+			MX50_PAD_UART2_RXD__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usbphy: usbphy {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_SS0__GPIO4_19		0x0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbphy>;
+	vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
new file mode 100644
index 000000000..5e6b30247
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -0,0 +1,919 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
new file mode 100644
index 000000000..ae51333c3
--- /dev/null
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx50-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		bus@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx50-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		bus@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
new file mode 100644
index 000000000..ba28ffe06
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-apf51 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
new file mode 100644
index 000000000..c66f274ba
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF51Dev is a docking board for the APF51 SOM */
+#include "imx51-apf51.dts"
+
+/ {
+	model = "Armadeus Systems APF51Dev docking/development board";
+	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
+
+	backlight {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			lw700 {
+				native-mode;
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-key {
+			label = "user";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <256>; /* BTN_0 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+		   <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx51-apf51dev {
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
+				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
+				MX51_PAD_EIM_CS4__GPIO2_29   0x100
+				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
+				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
+				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
+				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
+				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
+				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
+				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
+				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
+				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 000000000..552196d8a
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage Board";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
+
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	display2: disp2 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_hub_reset: regulator@0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotgreg>;
+			reg = <0>;
+			regulator-name = "hub_reset";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp2 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_hub_reset>;
+	fsl,usbphy = <&usbphy1>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-babbage {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D17__GPIO2_1		0x85
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+				MX51_PAD_GPIO1_0__GPIO1_0		0x100
+				MX51_PAD_GPIO1_1__GPIO1_1		0x100
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_A27__GPIO2_21		0x5
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			>;
+		};
+
+		pinctrl_ipu_disp2: ipudisp2grp {
+			fsl,pins = <
+				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+				MX51_PAD_DI_GP4__DI2_PIN15		0x5
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+			>;
+		};
+
+		pinctrl_usbh1reg: usbh1reggrp {
+			fsl,pins = <
+				MX51_PAD_EIM_D21__GPIO2_5		0x85
+			>;
+		};
+
+		pinctrl_usbotgreg: usbotgreggrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0x85
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 000000000..aab8d6f13
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&pmic {
+	fsl,mc13xxx-uses-rtc;
+
+	regulators {
+		vcoincell_reg: vcoincell {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-digi-connectcore-jsk {
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 000000000..16addb3a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	max-frequency = <50000000>;
+	bus-width = <1>;
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	wakeup-source;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455l";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: lan9221@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	imx51-digi-connectcore-som {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
+				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+			>;
+		};
+
+		pinctrl_lan9221: lan9221grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mc13892: mc13892grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mma7455l: mma7455lgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+				MX51_PAD_EIM_A16__EIM_A16		0x80000000
+				MX51_PAD_EIM_A17__EIM_A17		0x80000000
+				MX51_PAD_EIM_A18__EIM_A18		0x80000000
+				MX51_PAD_EIM_A19__EIM_A19		0x80000000
+				MX51_PAD_EIM_A20__EIM_A20		0x80000000
+				MX51_PAD_EIM_A21__EIM_A21		0x80000000
+				MX51_PAD_EIM_A22__EIM_A22		0x80000000
+				MX51_PAD_EIM_A23__EIM_A23		0x80000000
+				MX51_PAD_EIM_A24__EIM_A24		0x80000000
+				MX51_PAD_EIM_A25__EIM_A25		0x80000000
+				MX51_PAD_EIM_A26__EIM_A26		0x80000000
+				MX51_PAD_EIM_A27__EIM_A27		0x80000000
+				MX51_PAD_EIM_D16__EIM_D16		0x80000000
+				MX51_PAD_EIM_D17__EIM_D17		0x80000000
+				MX51_PAD_EIM_D18__EIM_D18		0x80000000
+				MX51_PAD_EIM_D19__EIM_D19		0x80000000
+				MX51_PAD_EIM_D20__EIM_D20		0x80000000
+				MX51_PAD_EIM_D21__EIM_D21		0x80000000
+				MX51_PAD_EIM_D22__EIM_D22		0x80000000
+				MX51_PAD_EIM_D23__EIM_D23		0x80000000
+				MX51_PAD_EIM_D24__EIM_D24		0x80000000
+				MX51_PAD_EIM_D25__EIM_D25		0x80000000
+				MX51_PAD_EIM_D26__EIM_D26		0x80000000
+				MX51_PAD_EIM_D27__EIM_D27		0x80000000
+				MX51_PAD_EIM_D28__EIM_D28		0x80000000
+				MX51_PAD_EIM_D29__EIM_D29		0x80000000
+				MX51_PAD_EIM_D30__EIM_D30		0x80000000
+				MX51_PAD_EIM_D31__EIM_D31		0x80000000
+				MX51_PAD_EIM_OE__EIM_OE			0x80000000
+				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 000000000..c2a929ba8
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 000000000..b6d931e96
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "CAN_RST";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <20000>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+
+		pinctrl_can: cangrp {
+			fsl,pins = <
+				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3rtsctsgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_backlight_1: backlightgrp-1 {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+			>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <
+				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
+			>;
+		};
+
+		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+			>;
+		};
+
+		pinctrl_gpioled: gpioledgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <
+				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+			>;
+		};
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h
new file mode 100644
index 000000000..910e0ec50
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-pinfunc.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX51_PINFUNC_H
+#define __DTS_IMX51_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
+#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
+#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
+#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
+#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
+#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
+#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
+#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
+#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
+#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
+#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
+#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
+#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
+#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
+#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
+#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
+#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
+#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
+#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
+#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
+#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
+#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
+#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
+#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
+#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
+#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
+#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
+#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
+#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
+#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
+#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
+#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
+#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
+#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
+#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
+#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
+#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
+#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
+#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
+#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
+#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
+#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
+#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
+#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
+#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
+#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
+#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
+#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
+#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
+#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
+#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
+#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
+#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
+#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
+#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
+#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
+#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
+#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
+#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
+#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
+#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
+#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
+#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
+#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
+#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
+#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
+#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
+#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
+#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
+#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
+#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
+#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
+#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
+#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
+#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
+#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
+#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
+#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
+#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
+#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
+#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
+#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
+#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
+#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
+#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
+#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
+#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
+#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
+#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
+#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
+#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
+#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
+#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
+#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
+#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
+#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
+#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
+#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
+#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
+#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
+#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
+#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
+#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
+#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
+#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
+#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
+#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
+#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
+#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
+#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
+#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
+#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
+#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
+#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
+#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
+#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
+#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
+#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
+#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
+#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
+#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
+#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
+#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
+#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
+#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
+#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
+#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
+#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
+#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
+#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
+#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
+#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
+#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
+#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
+#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
+#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
+#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
+#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
+#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
+#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
+#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
+#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
+#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
+#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
+#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
+#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
+#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
+#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
+#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
+#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
+#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
+#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
+#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
+#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
+#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
+#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
+#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
+#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
+#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
+#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
+#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
+#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
+#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
+#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
+#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
+#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
+#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
+#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
+#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
+#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
+#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
+#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
+#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
+#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
+#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
+#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
+#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
+#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
+#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
+#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
+#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
+#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
+#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
+#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
+#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
+#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
+#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
+#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
+#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
+#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
+#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
+#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
+#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
+#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
+#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
+#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
+#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
+#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
+#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
+#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
+#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
+#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
+#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
+#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
+#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
+#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
+#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
+#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
+#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
+#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
+#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
+#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
+#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
+#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
+#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
+#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
+#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
+#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
+#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
+#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
+#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
+#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
+#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
+#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
+#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
+#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
+#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
+#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
+#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
+#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
+#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
+#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
+#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
+#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
+#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
+#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
+#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
+#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
+#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
+#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
+#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
+#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
+#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
+#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
+#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
+#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
+#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
+#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
+#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
+#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
+#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
+#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
+#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
+#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
+#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
+#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
+#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
+#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
+#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
+#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
+#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
+#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
+#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
+#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
+#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
+#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
+#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
+#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
+#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
+#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
+#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
+#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
+#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
+#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
+#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
+#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
+#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
+#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
+#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
+#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
+#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
+#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
+#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
+#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
+#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
+
+#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 000000000..6ecb83e7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,331 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Technologic Systems TS-4800";
+	compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			clock-frequency = <24576000>;
+		};
+	};
+
+	backlight_reg: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_lcd>;
+		regulator-name = "enable_lcd_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 78770>;
+		brightness-levels = <0 150 200 255>;
+		default-brightness-level = <1>;
+		power-supply = <&backlight_reg>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <30066000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <50>;
+				hback-porch = <70>;
+				hsync-len = <50>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <50>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc: m41t00@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	fpga@0 {
+		compatible = "simple-bus";
+		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+				      0x00000000 0x1c092480 0x00000000>;
+		reg = <0 0x0000000 0x1d000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1d000>;
+
+		syscon: syscon@10000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000 0x3d>;
+			reg-io-width = <2>;
+
+			wdt {
+				compatible = "technologic,ts4800-wdt";
+				syscon = <&syscon 0xe>;
+			};
+		};
+
+		touchscreen@12000 {
+			compatible = "technologic,ts4800-ts";
+			reg = <0x12000 0x1000>;
+			syscon = <&syscon 0x10 6>;
+		};
+
+		fpga_irqc: fpga-irqc@15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		can@1a000 {
+			compatible = "technologic,sja1000";
+			reg = <0x1a000 0x100>;
+			interrupt-parent = <&fpga_irqc>;
+			interrupts = <1>;
+			reg-io-width = <2>;
+			nxp,tx-output-config = <0x06>;
+			nxp,external-clock-frequency = <24000000>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_enable_lcd: enablelcdgrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_pwm_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
+			MX51_PAD_EIM_CS0__EIM_CS0		0x0
+			MX51_PAD_EIM_CS1__EIM_CS1		0x0
+			MX51_PAD_EIM_EB0__EIM_EB0		0x85
+			MX51_PAD_EIM_EB1__EIM_EB1		0x85
+			MX51_PAD_EIM_OE__EIM_OE			0x85
+			MX51_PAD_EIM_LBA__EIM_LBA		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
new file mode 100644
index 000000000..e559ab0c3
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "ZII RDU1 Board";
+	compatible = "zii,imx51-rdu1", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+		rtc0 = &ds1341;
+	};
+
+	clk_26M_osc: 26M_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_26M_osc_gate: 26M_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz>;
+		clocks = <&clk_26M_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_26M_usb: usbhost_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_26M_snd: snd_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sndgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		/* no compatible here, bootloader will patch in correct one */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_3p3v>;
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swi2c>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,delay-us = <50>;
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			clocks = <&clk_26M_snd>;
+			VDDA-supply = <&vdig_reg>;
+			VDDIO-supply = <&vvideo_reg>;
+			#sound-dai-cells = <0>;
+		};
+	};
+
+	spi_gpio: spi-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiospi0>;
+		status = "okay";
+
+		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+
+		eeprom@0 {
+			compatible = "eeprom-93xx46";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+			spi-cs-high;
+			data-size = <8>;
+		};
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "TPA6130A2 HPLEFT",
+			"Headphone Jack", "TPA6130A2 HPRIGHT";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk_26M_snd>;
+		};
+	};
+
+	usbh1phy: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbphy2 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled0@3 {
+				reg = <3>;
+				label = "system:green:status";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled1@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen3_reg>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "hp-amp-shutdown-b", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	unused-sd3-wp-gpio {
+		/*
+		 * See pinctrl_esdhc1 below for more details on this
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+		Vdd-supply = <&reg_3p3v>;
+		sound-name-prefix = "TPA6130A2";
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+
+	/* touch nodes default disabled, bootloader will enable the right one */
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@4c {
+		compatible = "atmel,maxtouch";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+
+		eeprom@ae {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xae 0x200>;
+			zii,eeprom-name = "switch-eeprom";
+			/*
+			 * Not all RDU1s have this functionality, so we
+			 * rely on the bootloader to enable this
+			 */
+			status = "disabled";
+		};
+	};
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh1phy>;
+	disable-over-current;
+	maximum-speed = "full-speed";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh2phy>;
+	disable-over-current;
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0x5e
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0xa5
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x85
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0xa5
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz: clk26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			/*
+			 * GPIO1_1 is not directly used by eSDHC1 in
+			 * any capacity, but earlier versions of RDU1
+			 * used that pin as WP GPIO for eSDHC3 and
+			 * because of that that pad has an external
+			 * pull-up resistor. This is problematic
+			 * because out of reset the pad is configured
+			 * as ALT0 which serves as SD1_WP, which, when
+			 * pulled high by and external pull-up, will
+			 * inhibit execution of any write request to
+			 * attached eMMC device.
+			 *
+			 * To avoid this problem we configure the pad
+			 * to ALT1/GPIO and avoid driving SD1_WP
+			 * signal high.
+			 */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x1f5
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x2180
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x180
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x180
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x180
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x2084
+			MX51_PAD_EIM_CS5__FEC_CRS		0x180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x2180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x2180
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x2004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x2004
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x2180
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x2004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x2004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_EIM_A20__GPIO2_14		0x85
+		>;
+	};
+
+	pinctrl_gpiospi0: gpiospi0grp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D18__GPIO4_11		0x85
+			MX51_PAD_CSI2_D19__GPIO4_12		0x85
+			MX51_PAD_CSI2_HSYNC__GPIO4_14		0x85
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x85
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D0_CS__GPIO3_3		0x85
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x1e0
+			MX51_PAD_GPIO1_8__GPIO1_8		0x21e2
+		>;
+	};
+
+	pinctrl_sndgate26mhz: sndgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_swi2c: swi2cgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0xc5
+			MX51_PAD_DI1_D1_CS__GPIO3_4		0x400001f5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D14__GPIO3_26		0x21e6
+			MX51_PAD_NANDF_D15__GPIO3_25		0x21e6
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D8__GPIO3_12		0x04
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c4
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0xc5
+			MX51_PAD_UART2_TXD__UART2_TXD		0xc5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbgate26mhz: usbgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT6__GPIO1_19		0x85
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_STP__USBH1_STP		0x0
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x0
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x0
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x0
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x0
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x0
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x0
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x0
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x0
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x0
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x0
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x0
+		>;
+	};
+
+	pinctrl_usbh1phy: usbh1phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__GPIO4_8		0x85
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_A26__USBH2_STP		0x0
+			MX51_PAD_EIM_A24__USBH2_CLK		0x0
+			MX51_PAD_EIM_A25__USBH2_DIR		0x0
+			MX51_PAD_EIM_A27__USBH2_NXT		0x0
+			MX51_PAD_EIM_D16__USBH2_DATA0		0x0
+			MX51_PAD_EIM_D17__USBH2_DATA1		0x0
+			MX51_PAD_EIM_D18__USBH2_DATA2		0x0
+			MX51_PAD_EIM_D19__USBH2_DATA3		0x0
+			MX51_PAD_EIM_D20__USBH2_DATA4		0x0
+			MX51_PAD_EIM_D21__USBH2_DATA5		0x0
+			MX51_PAD_EIM_D22__USBH2_DATA6		0x0
+			MX51_PAD_EIM_D23__USBH2_DATA7		0x0
+		>;
+	};
+
+	pinctrl_usbh2phy: usbh2phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D1__GPIO4_7		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
new file mode 100644
index 000000000..aa91e5dde
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU2 Mezz Board";
+	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port5";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port6";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "port7";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "mezz2esb";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&vgen3_reg>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-mezz";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+			MX51_PAD_EIM_A20__GPIO2_14		0x0085
+			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x100
+			MX51_PAD_EIM_D23__GPIO2_7		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
new file mode 100644
index 000000000..875b10a7d
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU3 ESB board";
+	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "scu2scu";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "esb2host";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "esb2mezz";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					phy-mode = "mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipu {
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-esb";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
+			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
new file mode 100644
index 000000000..d80063560
--- /dev/null
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	tzic: tz-interrupt-controller@e0000000 {
+		compatible = "fsl,imx51-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe0000000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX5_CLK_CPU_PODF>;
+			clock-names = "cpu";
+			operating-points = <
+				166000	1000000
+				600000	1050000
+				800000	1100000
+			>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		iram: sram@1ffe0000 {
+			compatible = "mmio-sram";
+			reg = <0x1ffe0000 0x20000>;
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		ipu: ipu@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx51-ipu";
+			reg = <0x40000000 0x20000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu_di0: port@2 {
+				reg = <2>;
+
+				ipu_di0_disp1: endpoint {
+				};
+			};
+
+			ipu_di1: port@3 {
+				reg = <3>;
+
+				ipu_di1_disp2: endpoint {
+				};
+			};
+		};
+
+		bus@70000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x70000000 0x10000000>;
+			ranges;
+
+			spba@70000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x70000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@70004000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					status = "disabled";
+				};
+
+				esdhc2: mmc@70008000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@7000c000 {
+					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+					reg = <0x7000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: spi@70010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx51-ecspi";
+					reg = <0x70010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@70014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+					reg = <0x70014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@70020000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@70024000 {
+					compatible = "fsl,imx51-esdhc";
+					reg = <0x70024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
+			};
+
+			usbotg: usb@73f80000 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@73f80200 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@73f80400 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@73f80600 {
+				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
+				reg = <0x73f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@73f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx51-usbmisc";
+				reg = <0x73f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@73f84000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@73f88000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@73f8c000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@73f90000 {
+				compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
+				reg = <0x73f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@73f94000 {
+				compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+				reg = <0x73f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@73f98000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@73f9c000 {
+				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+				reg = <0x73f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@73fa0000 {
+				compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
+				reg = <0x73fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@73fa8000 {
+				compatible = "fsl,imx51-iomuxc";
+				reg = <0x73fa8000 0x4000>;
+			};
+
+			pwm1: pwm@73fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@73fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+				reg = <0x73fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@73fbc000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@73fc0000 {
+				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+				reg = <0x73fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@73fd0000 {
+				compatible = "fsl,imx51-src";
+				reg = <0x73fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@73fd4000{
+				compatible = "fsl,imx51-ccm";
+				reg = <0x73fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+		};
+
+		bus@80000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
+			iim: efuse@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+				reg = <0x83f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
+			};
+
+			owire: owire@83fa4000 {
+				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
+				reg = <0x83fa4000 0x4000>;
+				interrupts = <88>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@83fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-ecspi";
+				reg = <0x83fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@83fb0000 {
+				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+				reg = <0x83fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+			};
+
+			cspi: spi@83fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+				reg = <0x83fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@83fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@83fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+				reg = <0x83fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@83fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@83fd0000 {
+				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+				reg = <0x83fd0000 0x4000>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
+			weim: weim@83fda000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-weim";
+				reg = <0x83fda000 0x1000>;
+				clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
+				ranges = <
+					0 0 0xb0000000 0x08000000
+					1 0 0xb8000000 0x08000000
+					2 0 0xc0000000 0x08000000
+					3 0 0xc8000000 0x04000000
+					4 0 0xcc000000 0x02000000
+					5 0 0xce000000 0x02000000
+				>;
+				status = "disabled";
+			};
+
+			nfc: nand@83fdb000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx51-nand";
+				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			pata: pata@83fe0000 {
+				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+				reg = <0x83fe0000 0x4000>;
+				interrupts = <70>;
+				clocks = <&clks IMX5_CLK_PATA_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@83fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+				reg = <0x83fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@83fec000 {
+				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+				reg = <0x83fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			vpu: vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 000000000..9a2e1fde7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Automotive Reference Design Board";
+	compatible = "fsl,imx53-ard", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	eim-cs1@f4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,eim-bus", "simple-bus";
+		reg = <0xf4000000 0x3ff0000>;
+		ranges;
+
+		lan9220@f4000000 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0xf4000000 0x2000000>;
+			phy-mode = "mii";
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 0x8>;
+			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
+			smsc,irq-push-pull;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "Home";
+			gpios = <&gpio5 10 0>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio5 11 0>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio5 12 0>;
+			linux,code = <KEY_PROGRAM >;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 13 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 0 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-ard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
+				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
+				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
+				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
+				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
+				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
+				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
+				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
+				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
+				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
+				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
+				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
+				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
+				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
+				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
+				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
+				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
+				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
+				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
+				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
+				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
+				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
+				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
+				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
+				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
+				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
new file mode 100644
index 000000000..cfb18849a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 Beckhoff Automation GmbH & Co. KG
+ * based on imx53-qsb.dts
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Beckhoff CX9020 Embedded PC";
+	compatible = "bhf,cx9020", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display-0 {
+		#address-cells =<1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-converter {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-r {
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		pwr-g {
+			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		pwr-b {
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sd1-b {
+			linux,default-trigger = "mmc0";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		sd2-b {
+			linux,default-trigger = "mmc1";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
+			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
+			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
+			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
+			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
+			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
+			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
+			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
+			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp0: ipudisp0grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
new file mode 100644
index 000000000..0e7f071fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-ddc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	imx53-kp-ddc {
+		pinctrl_disp: dispgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts
new file mode 100644
index 000000000..6e3d71baa
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-hsc.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 HSC";
+	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+};
+
+&fec {
+	status = "okay";
+
+	fixed-link { /* RMII fixed link to LAN9303 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <400>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&fec>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
new file mode 100644
index 000000000..4508f3413
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	imx53-kp-common {
+		pinctrl_buzzer: buzzergrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+			>;
+		};
+
+		pinctrl_gpiobuttons: gpiobuttonsgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+			>;
+		};
+
+		pinctrl_kp_common: kpcommongrp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+			>;
+		};
+
+		pinctrl_leds: ledgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+			>;
+		};
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
new file mode 100644
index 000000000..fe5e0d308
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
new file mode 100644
index 000000000..a1a6228d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <31500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				vback-porch = <33>;
+				vfront-porch = <9>;
+				vsync-len = <3>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_backlight>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		user1 {
+			label = "user1";
+			gpios = <&gpio2 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "user2";
+			gpios = <&gpio2 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbh1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 2 0>;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-m53evk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-m53evk-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Ext Spk", "LINE_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
new file mode 100644
index 000000000..d5c68d1ea
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_power_button>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pinctrl_power_out>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
+				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
+				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
+			>;
+		};
+
+		pinctrl_beeper: beepergrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
+				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
+
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
+				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
+				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
+				MX53_PAD_EIM_RW__GPIO2_26		0xe4
+				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
+				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
+				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			/* LVDS pins only have pin mux configuration */
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_power_button: powerbutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+			>;
+		};
+
+		pinctrl_power_out: poweroutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
new file mode 100644
index 000000000..09eee0dd4
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+		default-brightness-level = <10>;
+		enable-gpios = <&gpio7 7 0>;
+		power-supply = <&reg_backlight>;
+	};
+
+	disp1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp1_1>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_backlight: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd-supply";
+			gpio = <&gpio2 5 0>;
+			startup-delay-us = <5000>;
+		};
+
+		reg_3p2v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "tq,imx53-mba53-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-mba53-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	lvds1 {
+		pinctrl_lvds1_1: lvds1-grp1 {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1_2: lvds1-grp2 {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+	};
+
+	disp1 {
+		pinctrl_disp1_1: disp1-grp1 {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
+				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
+				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
+			>;
+		};
+	};
+
+	tve {
+		pinctrl_vga_sync_1: vgasync-grp1 {
+			fsl,pins = <
+				/* VGA_VSYNC, HSYNC with max drive strength */
+				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
+				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&cspi {
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	sensor2: lm75@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync_1>;
+	ddc-i2c-bus = <&i2c3>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h
new file mode 100644
index 000000000..67bd06610
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-pinfunc.h
@@ -0,0 +1,1189 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX53_PINFUNC_H
+#define __DTS_IMX53_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
+#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
+#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
+#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
+#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
+#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
+#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
+#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
+#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
+#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
+#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
+#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
+#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
+#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
+#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
+#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
+#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
+#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
+#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
+#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
+#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
+#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
+#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
+#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
+#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
+#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
+#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
+#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
+#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
+#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
+#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
+#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
+#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
+#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
+#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
+#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
+#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
+#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
+#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
+#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
+#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
+#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
+#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
+#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
+#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
+#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
+#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
+#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
+#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
+#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
+#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
+#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
+#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
+#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX				0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
+#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX				0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
+#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
+#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
+#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS				0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
+#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
+#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
+#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS				0x150 0x498 0x000 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
+#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
+#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
+#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
+#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
+#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
+#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
+#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
+#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
+#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
+#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
+#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
+#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
+#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
+#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
+#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
+#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
+#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
+#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
+#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
+#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
+#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
+#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
+#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
+#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
+#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
+#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
+#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
+#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
+#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
+#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
+#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
+#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
+#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
+#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
+#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
+#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
+#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
+#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
+#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
+#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
+#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
+#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
+#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
+#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
+#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
+#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
+#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
+#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
+#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
+#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
+#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
+#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
+#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
+#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
+#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
+#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
+#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
+#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
+#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
+#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
+#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
+#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
+#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
+#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
+#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
+#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
+#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
+#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
+#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
+#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
+#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
+#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
+#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
+#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
+#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
+#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
+#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
+#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
+#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
+#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
+#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
+#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
+#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
+#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
+#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
+#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
+#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
+#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
+#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
+#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
+#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
+#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
+#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
+#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
+#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
+#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
+#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
+#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
+#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
+#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
+#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
+#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
+#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
+#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
+#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
+#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
+#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
+#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
+#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
+#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
+
+#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
new file mode 100644
index 000000000..54e39db44
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -0,0 +1,1119 @@
+/*
+ * Copyright 2014 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "General Electric CS ONE";
+	compatible = "ge,imx53-cpuvo", "fsl,imx53";
+
+	aliases {
+		spi0 = &cspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	cko2_11M: sgtl-clock-cko2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sgtlsound: sound {
+		compatible = "fsl,imx53-cpuvo-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-cpuvo-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+
+	reg_sgtl5k: regulator-sgtl5k {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-sgtl5k";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh2_vbus: regulator-usbh2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh3_vbus: regulator-usbh3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh3_vbus>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_tsiref: regulator-tsiref {
+		compatible = "regulator-fixed";
+		regulator-name = "tsiref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
+				     73 76 79 81 84 86 89 91 94 96 99 102 104
+				     107 109 112 114 117 119 122 124 127 130
+				     132 135 137 140 142 145 147 150 153 155
+				     158 160 163 165 168 170 173 175 178 181
+				     183 186 188 191 193 196 198 201 204 206
+				     209 211 214 216 219 221 224 226 229 232
+				     234 237 239 242 244 247 249 252 255>;
+		default-brightness-level = <0>;
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
+	};
+
+	leds-brightness {
+		compatible = "pwm-leds";
+
+		alarm-brightness {
+			pwms = <&pwm1 0 100000>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_alarmled_pins>;
+
+		alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm4 {
+			label = "alarm:silenced";
+			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+	};
+
+	power-gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	touch-lock-key {
+		compatible = "gpio-keys";
+
+		touch-lock-button {
+			label = "Touch lock button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F12>;
+		};
+	};
+
+	usbphy2: usbphy-2 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	usbphy3: usbphy-3 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	panel-lvds0 {
+		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW
+		    &gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	gpioxra0: gpio@2 {
+		compatible = "exar,xra1403";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+
+	gpioxra1: gpio@3 {
+		compatible = "exar,xra1403";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	da9053@0 {
+		compatible = "dlg,da9053-aa";
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <1000000>;
+		dlg,tsi-as-adc;
+		tsiref-supply = <&reg_tsiref>;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+
+		i2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				#sound-dai-cells = <0>;
+				VDDA-supply = <&reg_sgtl5k>;
+				VDDIO-supply = <&reg_sgtl5k>;
+				clocks = <&cko2_11M>;
+				status = "okay";
+			};
+		};
+
+		i2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rtc@30 {
+			       compatible = "sii,s35390a";
+			       reg = <0x30>;
+			};
+
+			temp@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+			};
+
+			mma8453q: accelerometer@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-names = "INT1";
+			};
+
+			mpl3115: pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c9: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c10: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c11: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reg = <0x4b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@2 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	fsl,usbphy = <&usbphy2>;
+	vbus-supply = <&reg_usbh2_vbus>;
+	status = "okay";
+};
+
+&usbh3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh3>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh3_vbus>;
+	fsl,usbphy = <&usbphy3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_rev6>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
+			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
+			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
+			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
+			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
+			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
+			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
+			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
+			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
+			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
+			/* ECSPI1_SS0, must treat as GPIO for EzPort */
+			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
+			MX53_PAD_KEY_COL2__GPIO4_10		0x0
+			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
+			MX53_PAD_KEY_COL3__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
+			MX53_PAD_EIM_RW__GPIO2_26		0x0
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x0
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
+		>;
+	};
+
+	pinctrl_hog_rev6: hoggrp {
+		fsl,pins = <
+			/* CKO2 */
+			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
+			/* DEFIB_SYNC_MARKER_IN_IRQ */
+			MX53_PAD_GPIO_5__GPIO1_5		0x0
+			/* ACCELEROMETER_DATA_RDY_N */
+			MX53_PAD_GPIO_6__GPIO1_6		0x0
+			/* TEMPERATURE_ALERT_N */
+			MX53_PAD_GPIO_7__GPIO1_7		0x0
+			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
+			MX53_PAD_GPIO_8__GPIO1_8		0x0
+			/* DOCKING_I2C_INTERFACE_IRQ_N */
+			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
+			/* PWR_OUT_TO_DOCK_FAULT_N */
+			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
+			/* ENABLE_PWR_TO_DOCK_N */
+			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
+			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
+			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
+			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
+			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
+			/* DOCK_PRESENT_N */
+			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
+			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
+			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
+			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
+			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
+			/* RESET_IMX535_ETHERNET_PHY_N */
+			MX53_PAD_EIM_A22__GPIO2_16		0x0
+			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+			MX53_PAD_EIM_A21__GPIO2_17		0x0
+			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
+			MX53_PAD_EIM_A20__GPIO2_18		0x0
+			/* RESET_IMX535_USB_HOST3_PHY_N */
+			MX53_PAD_EIM_A19__GPIO2_19		0x0
+			/* ESDHC3_EMMC_NAND_RST_N */
+			MX53_PAD_EIM_A18__GPIO2_20		0x0
+			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
+			MX53_PAD_EIM_A17__GPIO2_21		0x0
+			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
+			MX53_PAD_EIM_A16__GPIO2_22		0x0
+			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
+			MX53_PAD_EIM_LBA__GPIO2_27		0x0
+			/* RESET_DP0_TRANSMITTER_N */
+			MX53_PAD_EIM_EB0__GPIO2_28		0x0
+			/* RESET_DP1_TRANSMITTER_N */
+			MX53_PAD_EIM_EB1__GPIO2_29		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
+			MX53_PAD_EIM_DA0__GPIO3_0		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
+			MX53_PAD_EIM_DA1__GPIO3_1		0x0
+			/* LVDS1_MUX_CTRL */
+			MX53_PAD_EIM_DA2__GPIO3_2		0x0
+			/* LVDS0_MUX_CTRL */
+			MX53_PAD_EIM_DA3__GPIO3_3		0x0
+			/* DP1_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA4__GPIO3_4		0x0
+			/* DP0_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA5__GPIO3_5		0x0
+			/* USB_RESET_N */
+			MX53_PAD_EIM_DA6__GPIO3_6		0x0
+			/* ENABLE_BATTERY_CHARGER */
+			MX53_PAD_EIM_DA7__GPIO3_7		0x0
+			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
+			MX53_PAD_EIM_DA8__GPIO3_8		0x0
+			/* SOFTWARE_CONTROLLED_POWERDOWN */
+			MX53_PAD_EIM_DA9__GPIO3_9		0x0
+			/* DC_PWR_IN_OK */
+			MX53_PAD_EIM_DA10__GPIO3_10		0x0
+			/* BATT_PRESENT_N */
+			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
+			/* PMIC_IRQ_N */
+			MX53_PAD_EIM_DA12__GPIO3_12		0x0
+			/* PMIC_VDD_FAULT_STATUS_N */
+			MX53_PAD_EIM_DA13__GPIO3_13		0x0
+			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
+			MX53_PAD_EIM_DA14__GPIO3_14		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_DA15__GPIO3_15		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D22__GPIO3_22		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D24__GPIO3_24		0x0
+			/* NBP_PUMP_VALVE_PWR_ENABLE */
+			MX53_PAD_EIM_D25__GPIO3_25		0x0
+			/* NIBP_RESET_N */
+			MX53_PAD_EIM_D26__GPIO3_26		0x0
+			/* LATCHED_OVERPRESSURE_N */
+			MX53_PAD_EIM_D27__GPIO3_27		0x0
+			/* NBP_SBWTCLK */
+			MX53_PAD_EIM_D29__GPIO3_29		0x0
+			/* ENABLE_WIFI_MODULE */
+			MX53_PAD_GPIO_11__GPIO4_1		0x400
+			/* WIFI_MODULE_IRQ_N */
+			MX53_PAD_GPIO_12__GPIO4_2		0x400
+			/* ENABLE_BLUETOOTH_MODULE */
+			MX53_PAD_GPIO_13__GPIO4_3		0x400
+			/* RESET_IMX535_USB_HOST2_PHY_N */
+			MX53_PAD_GPIO_14__GPIO4_4		0x400
+			/* ONKEY_IS_DEPRESSED */
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
+			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
+			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
+			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
+			MX53_PAD_EIM_A25__GPIO5_2		0x0
+			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
+			MX53_PAD_EIM_A24__GPIO5_4		0x0
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
+			/* HOST_CONTROLLED_RESET_TO_LCD_N */
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
+			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
+			/* LR_SCAN_CTRL */
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
+			/* UD_SCAN_CTRL */
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
+			/* DATA_WIDTH_CTRL */
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
+			/* BACKLIGHT_ENABLE */
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
+			/* MED_USB_PORT_1_HOST_SELECT */
+			MX53_PAD_EIM_A23__GPIO6_6		0x0
+			/* MED_USB_PORT_2_HOST_SELECT */
+			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
+			/* MED_USB_PORT_3_HOST_SELECT */
+			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
+			/* MED_USB_PORT_4_HOST_SELECT */
+			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
+			/* MED_USB_PORT_5_HOST_SELECT */
+			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
+			/* MED_USB_PORT_6_HOST_SELECT */
+			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
+			/* MED_USB_PORT_7_HOST_SELECT */
+			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
+			/* MED_USB_PORT_8_HOST_SELECT */
+			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_0 */
+			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_1 */
+			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_2 */
+			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
+			/* POWER_AND_BOOT_STATUS_INDICATOR */
+			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
+			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
+			MX53_PAD_GPIO_16__GPIO7_11		0x0
+			/* BATTERY_STATUS_INDICATOR_AMBER */
+			MX53_PAD_GPIO_17__GPIO7_12		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
+			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
+			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_OTG_VBUS_ENABLE */
+			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			/* USB H2 */
+			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
+			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
+			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
+			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
+			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
+			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
+			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
+			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
+			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
+			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
+			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
+			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
+			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
+		>;
+	};
+
+	pinctrl_usbh2_vbus: usbh2-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST2_VBUS_ENABLE */
+			MX53_PAD_EIM_D31__GPIO3_31		0x0
+		>;
+	};
+
+	pinctrl_usbh3_vbus: usbh3-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST3_VBUS_ENABLE */
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
+		>;
+	};
+
+	pinctrl_usbh3: usbh3grp {
+		fsl,pins = <
+			/* USB H3 */
+			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
+			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
+			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
+			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
+			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
+			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
+			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
+			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
+			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
+			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
+			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
+			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
+			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			/* USB_OTG_FAULT_N */
+			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
+		>;
+	};
+
+	pinctrl_alarmled_pins: qmx6alarmledgrp {
+		fsl,pins = <
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
new file mode 100644
index 000000000..9b4efcd82
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+			>;
+		};
+
+		/* open drain */
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 000000000..6831836bd
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start Board";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+};
+
+&i2c1 {
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tve {
+	dac-supply = <&ldo7_reg>;
+};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
new file mode 100644
index 000000000..1bbf24ad3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start-R Board";
+	compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+	imx53-qsrb {
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
+			>;
+		};
+	};
+};
+
+&i2c1 {
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		regulators {
+			sw1_reg: sw1a {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1b_reg: sw1b {
+				regulator-name = "SW1B";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+			};
+
+			sw4a_reg: sw4a {
+				regulator-name = "SW4A";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4b_reg: sw4b {
+				regulator-name = "SW4B";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw5_reg: sw5 {
+				regulator-name = "SW5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "SWBST";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-name = "VPLL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vrefddr_reg: vrefddr {
+				regulator-name = "VREFDDR";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-name = "VUSB";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-name = "VUSB2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdac_reg: vdac {
+				regulator-name = "VDAC";
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "VGEN1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "VGEN2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tve {
+	dac-supply = <&vdac_reg>;
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 000000000..9be44e807
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+	compatible = "fsl,imx53-smd", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	zigbee: mc1323@0 {
+		compatible = "fsl,mc1323";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-smd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
+				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
+				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
+				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_csi0: ipucsi0grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
+				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
+				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
+				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
+				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
+				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
+				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
+				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
+				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
+				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
+				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
+				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	magnetometer: mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+
+	touchkey: mpr121@5a {
+		compatible = "fsl,mpr121";
+		reg = <0x5a>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	camera: ov5642@3c {
+		compatible = "ovti,ov5642";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
+		assigned-clock-rates = <0>, <24000000>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		clock-names = "xclk";
+		DVDD-supply = <&ldo9_reg>;
+		AVDD-supply = <&ldo7_reg>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5642_to_ipu_csi0: endpoint {
+				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_csi0_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu_csi0>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
new file mode 100644
index 000000000..7e7f9f3b3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
+	vmmc-supply = <&reg_3p3v>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-tqma53 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
+				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
+				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
+				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
+				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
+				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
+				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
+				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
+				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
+				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2_cdwp: esdhc2cdwp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+		   <&gpio1 21 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 4>; /* PATA_DATA6, active high */
+	};
+
+	sensor1: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	eeprom: 24c64@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
new file mode 100644
index 000000000..a7f775272
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -0,0 +1,351 @@
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_vga1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x03x {
+		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+			fsl,pins = <
+				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+			>;
+		};
+
+		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
new file mode 100644
index 000000000..6cdf2082c
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr0: regulator-lvds0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_pwr1: regulator-lvds1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x13x {
+		pinctrl_lvds0: lvds0grp {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1: lvds1grp {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+		};
+
+		pinctrl_eeti1: eeti1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_eeti2: eeti2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
new file mode 100644
index 000000000..7c9730f3f
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -0,0 +1,595 @@
+/*
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ *   Copyright 2011 Freescale Semiconductor, Inc.
+ *   Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0>;
+	};
+
+	aliases {
+		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+		can1 = &can1;
+		ipu = &ipu;
+		reg-can-xcvr = &reg_can_xcvr;
+		usbh1 = &usbh1;
+		usbotg = &usbotg;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stk5led>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+		model = "tx53-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		/* '1' based port numbers according to datasheet names */
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&esdhc2 {
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc1: ds1339@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ds1339>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-tx53 {
+		pinctrl_hog: hoggrp {
+			/* pins not in use by any device on the Starterkit board series */
+			fsl,pins = <
+				/* CMOS Sensor Interface */
+				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+				/* Module Specific Signal */
+				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+				>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+		};
+
+		pinctrl_ds1339: ds1339grp {
+			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
+				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-keygrp {
+			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
+				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
+				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_ssi2: ssi2grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+			>;
+		};
+
+		pinctrl_stk5led: stk5ledgrp {
+			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+			>;
+		};
+
+		pinctrl_usbotg_vbus: usbotg-vbusgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+			>;
+		};
+	};
+};
+
+&ipu {
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&sdma {
+	fsl,sdma-ram-script-name = "sdma-imx53.bin";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	disable-over-current;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
new file mode 100644
index 000000000..f34993a49
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -0,0 +1,225 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configuration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 000000000..ae53d178a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SD2_CD */
+				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+				/* SD2_WP */
+				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+			>;
+		};
+
+		/* Keyboard controller */
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000..24859d0c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 0>; /* PEN */
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Make DA9053 regulator functional */
+				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+				/* FEC Power enable */
+				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+				/* FEC RST */
+				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 000000000..f4e7f437e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu_di0>, <&ipu_di1>;
+	};
+
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
+		compatible = "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_REF>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		ipu: ipu@18000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx53-ipu";
+			reg = <0x18000000 0x08000000>;
+			interrupts = <11 10>;
+			clocks = <&clks IMX5_CLK_IPU_GATE>,
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di0_lvds0: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds0_in>;
+				};
+			};
+
+			ipu_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu_di1_lvds1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&lvds1_in>;
+				};
+
+				ipu_di1_tve: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&tve_in>;
+				};
+			};
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		bus@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi1: spi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx53-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx53-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			aipstz1: bridge@53f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x53f00000 0x60>;
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53f80800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx53-usbmisc";
+				reg = <0x53f80800 0x200>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@53f94000 {
+				compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <60>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@53f9c000 {
+				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <59>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			ldb: ldb@53fa8008 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ldb";
+				reg = <0x53fa8008 0x4>;
+				gpr = <&gpr>;
+				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
+				clock-names = "di0_pll", "di1_pll",
+					      "di0_sel", "di1_sel",
+					      "di0", "di1";
+				status = "disabled";
+
+				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+
+						lvds0_in: endpoint {
+							remote-endpoint = <&ipu_di0_lvds0>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+
+				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+					status = "disabled";
+
+					port@1 {
+						reg = <1>;
+
+						lvds1_in: endpoint {
+							remote-endpoint = <&ipu_di1_lvds1>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+					};
+				};
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			can1: can@53fc8000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fc8000 0x4000>;
+				interrupts = <82>;
+				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@53fcc000 {
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <83>;
+				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: reset-controller@53fd0000 {
+				compatible = "fsl,imx53-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		bus@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			aipstz2: bridge@63f00000 {
+				compatible = "fsl,imx53-aipstz";
+				reg = <0x63f00000 0x60>;
+			};
+
+			iim: efuse@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks IMX5_CLK_IIM_GATE>;
+			};
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: spi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+					 <&clks IMX5_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+			cspi: spi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			nfc: nand@63fdb000 {
+				compatible = "fsl,imx53-nand";
+				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
+				interrupts = <8>;
+				clocks = <&clks IMX5_CLK_NFC_GATE>;
+				status = "disabled";
+			};
+
+			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+						"fsl,imx21-ssi";
+				reg = <0x63fe8000 0x4000>;
+				interrupts = <96>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			tve: tve@63ff0000 {
+				compatible = "fsl,imx53-tve";
+				reg = <0x63ff0000 0x1000>;
+				interrupts = <92>;
+				clocks = <&clks IMX5_CLK_TVE_GATE>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
+				clock-names = "tve", "di_sel";
+				status = "disabled";
+
+				port {
+					tve_in: endpoint {
+						remote-endpoint = <&ipu_di1_tve>;
+					};
+				};
+			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks IMX5_CLK_OCRAM>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
new file mode 100644
index 000000000..665d63765
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -0,0 +1,562 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/ {
+	keyboard {
+		compatible = "gpio-keys";
+
+		btn0 {
+			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
+			label = "btn0";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn1 {
+			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
+			label = "btn1";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn2 {
+			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
+			label = "btn2";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		btn3 {
+			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
+			label = "btn3";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		gen-led0 {
+			label = "led0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led0>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		gen-led1 {
+			label = "led1";
+			gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		gen-led2 {
+			label = "led2";
+			gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		gen-led3 {
+			label = "led3";
+			gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet: regulator-ethernet {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_enet>;
+		compatible = "regulator-fixed";
+		regulator-name = "ethernet-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&sw4_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_audio>;
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_uart3: regulator-uart3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_uart3>;
+		compatible = "regulator-fixed";
+		regulator-name = "uart3-supply";
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-supply";
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie>;
+		regulator-name = "mpcie_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_mipi>;
+		regulator-name = "mipi_pwr_en";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_enet>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&i2c3 {
+	ov5640: camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_mipi>;
+		AVDD-supply = <&reg_mipi>;
+		DVDD-supply = <&reg_mipi>;
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pcf8575: gpio@20 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf8574>;
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		lines-initial-states = <0x0710>;
+		wakeup-source;
+	};
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0	/* ENET_INT */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x1b0b0	/* ETHR_nRST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_led0: led0grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+	    >;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b1
+		>;
+	};
+
+	pinctrl_pcf8574: pcf8575grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+	    >;
+	};
+
+	pinctrl_reg_1v8: reg1v8grp {
+	    fsl,pins = <
+		MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_3v3: reg3v3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_audio: reg-audiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_enet: reg-enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_hdmi: reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_mipi: reg-mipigrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+	};
+
+	pinctrl_reg_pcie: reg-pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+	};
+
+	pinctrl_reg_uart3: reguart3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_usb_h1_vbus: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-usb-otggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0xd17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
new file mode 100644
index 000000000..547fb141e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1837";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_vadj_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpmi_nand: gpmi-nandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <	/* Enable ARM Debugger */
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x13059	/* BT_EN */
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
+		>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		  tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
new file mode 100644
index 000000000..3dcce3454
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Solo Module on APF6Dev Board";
+	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
new file mode 100644
index 000000000..b16603f27
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -0,0 +1,158 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+
+		port@0 {
+			reg = <0>;
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		power-on-delay = <10>;
+
+		display-timings {
+			480x800p57 {
+				native-mode;
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
new file mode 100644
index 000000000..abb2a1b9c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
@@ -0,0 +1,98 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel: panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4d {
+		compatible = "atmel,maxtouch";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
new file mode 100644
index 000000000..5c7e85300
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		status = "okay";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
+
+		display-timings {
+			480x800p60 {
+				native-mode;
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <59>;
+				hback-porch = <10>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
new file mode 100644
index 000000000..4d58cb443
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <33246000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <88>;
+				hback-porch = <88>;
+				hsync-len = <80>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				vsync-len = <25>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 000000000..7da74e6f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal dedicated to mcp251x */
+	clk16m: clock-16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "clk16m";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/*
+	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+	 */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcap_1>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
+		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
+		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
+		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
+	>;
+
+	pinctrl_pcap_1: pcap1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0 /* SODIMM 28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_mxt_ts: mxttsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x130b0 /* SODIMM 107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14	0x130b0 /* SODIMM 106 */
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000
+		  3 0 0x0e000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
new file mode 100644
index 000000000..223275f02
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1_1-uhs.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
+		     "toradex,colibri_imx6dl-v1_1",
+		     "toradex,colibri_imx6dl-eval-v3",
+		     "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+	/*
+	 * Please make sure your carrier board does not pull-up any of
+	 * the MMC/SD signals to 3.3 volt before attempting to activate
+	 * UHS-I support.
+	 * To let signaling voltage be changed to 1.8V, please
+	 * delete no-1-8-v property (example below):
+	 * /delete-property/no-1-8-v;
+	 */
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000..2b2fc360b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 000000000..e09c565d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
new file mode 100644
index 000000000..2b1b3e193
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
new file mode 100644
index 000000000..cece4aafd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
+	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
new file mode 100644
index 000000000..864dc5018
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Eckelmann AG.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Eckelmann CI 4X10 Board";
+	compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	rmii_clk: clock-rmii {
+		/* This clock is provided by the phy (KSZ8091RNB) */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	siox {
+		compatible = "eckelmann,siox-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_siox>;
+		din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "everspin,mr25h256";
+		reg = <0>;
+		spi-max-frequency = <15000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "buzzer", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "in2",
+			  "prio2", "prio1", "aux", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "in1",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	temperature-sensor@49 {
+		compatible = "ad,ad7414";
+		reg = <0x49>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2127";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hog {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x00000018 /* OUT_2 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x00000018 /* OUT_3 */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x00000000 /* In1 */
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x00000000 /* In2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x00000018 /* unused watchdog pin */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x00000018 /* unused watchdog pin */
+
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 	0x000100a0
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x000100a0
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x000100a0
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000100a0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x000100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x000100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x000100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x0001b098
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x0001b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x0001b0b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x00000018
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x0001b020
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x0001b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x0001b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* without SION i2c doesn't detect bus busy */
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b820
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b820
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x00000018
+		>;
+	};
+
+	pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x0001b0b0
+		>;
+	};
+
+	pinctrl_siox: sioxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x0001b010	/* DIN */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0001b010	/* DOUT */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0001b010	/* DCLK */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x0001b010	/* DLD */
+		>;
+	};
+
+	pinctrl_uart1_dte: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x0001b010	/* DCD */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x0001b010	/* DTR */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D28__UART2_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D29__UART2_CTS_B 	0x0001b010
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x0001b010	/* DCD */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b010	/* DTR */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart3_dce: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x0001b010
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x0001b010
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0001b010
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0001b010	/* RTS */
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x00017059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x00010059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x00017059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x00017059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x00017059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x00017059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x00017059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x00017059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x00017059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x00017059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&rmii_clk>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dce>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dce>;
+	rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dce>;
+	rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
new file mode 100644
index 000000000..407ad8d43
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
new file mode 100644
index 000000000..9956d12a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
new file mode 100644
index 000000000..9ea23dd54
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
new file mode 100644
index 000000000..182e8194c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
new file mode 100644
index 000000000..a106c4e3e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
new file mode 100644
index 000000000..82d5f8572
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts
new file mode 100644
index 000000000..4864a36f9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw552x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
+	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
new file mode 100644
index 000000000..59b8afc36
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
new file mode 100644
index 000000000..21bdfaf8d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw560x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
new file mode 100644
index 000000000..103261ea9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
new file mode 100644
index 000000000..9c6d3cd3d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5904.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
new file mode 100644
index 000000000..3fa2822be
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
new file mode 100644
index 000000000..0d5e7e5da
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
new file mode 100644
index 000000000..5260e0142
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
new file mode 100644
index 000000000..b74e533c8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000..a63f742f2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 000000000..66a06cf3c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
new file mode 100644
index 000000000..cbd02eb48
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000..80313c13b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,55 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
new file mode 100644
index 000000000..e61ef1156
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
@@ -0,0 +1,54 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
new file mode 100644
index 000000000..b12cd87f3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
new file mode 100644
index 000000000..d8f3821a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
new file mode 100644
index 000000000..73d710d34
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 000000000..80fa60607
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
new file mode 100644
index 000000000..a864fdbd5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
new file mode 100644
index 000000000..028951955
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "BTicino i.MX6DL Mamoj board";
+	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+		default-brightness-level = <7>;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_lcd_lr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-dvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 0>;
+		enable-active-high;
+		startup-delay-us = <21000>;
+	};
+
+	reg_lcd_power: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-enable";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_3v3>;
+	};
+
+	reg_lcd_vgl: regulator-lcd-vgl {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_power>;
+	};
+
+	reg_lcd_vgh: regulator-lcd-vgh {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgh";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_avdd>;
+	};
+
+	reg_lcd_vcom: regulator-lcd-vcom {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vcom";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <11000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgh>;
+	};
+
+	reg_lcd_lr: regulator-lcd-lr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vcom>;
+	};
+
+	reg_lcd_avdd: regulator-lcd-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-avdd";
+		regulator-min-microvolt = <10280000>;
+		regulator-max-microvolt = <10280000>;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgl>;
+	};
+
+	reg_usb_host: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhost-vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhost>;
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			/* CPU vdd_arm core */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* SOC vdd_soc */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* I/O power GEN_3V3 */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* not used */
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			/* PMIC vsnvs. EX boot mode */
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* 1v8 general power */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 2v8 general power IMX6 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 3v3 Ethernet */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
+			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
+			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhost: usbhostgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
new file mode 100644
index 000000000..61fa30991
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
new file mode 100644
index 000000000..ef58d3b0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000..9f7f9f981
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
+	compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
new file mode 100644
index 000000000..0a07cc6f8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
new file mode 100644
index 000000000..6f8aaf524
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
+	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
new file mode 100644
index 000000000..659a8e871
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
new file mode 100644
index 000000000..d7403c5c4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
new file mode 100644
index 000000000..b282dbf95
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts
new file mode 100644
index 000000000..b7b1c07f9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
+	compatible = "technexion,imx6dl-pico", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
new file mode 100644
index 000000000..9d88d09f9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -0,0 +1,1088 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6DL_PINFUNC_H
+#define __DTS_IMX6DL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
+#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
+#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
+#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
+#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1f8 0x5c8 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
new file mode 100644
index 000000000..90e01de8c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		vin-voltage-override = <3100000>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		t5t-rmb-extra-byte-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&usbotg {
+	disable-over-current;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
new file mode 100644
index 000000000..ae6da241f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 500000>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <20>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
new file mode 100644
index 000000000..b72f8ea1e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Basic i.MX6 Dual Lite Board";
+	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&ecspi3 {
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
new file mode 100644
index 000000000..e7d9bfbfd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -0,0 +1,596 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pf0100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6-riotboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
new file mode 100644
index 000000000..ff3283c83
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
+	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+};
+
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		996000  1275000
+		792000  1175000
+		396000  1150000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC-PU uV */
+		996000	1200000
+		792000	1175000
+		396000	1175000
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
new file mode 100644
index 000000000..33040761b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Lite Board";
+	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
new file mode 100644
index 000000000..cd6bbf22a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
new file mode 100644
index 000000000..b95469c52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Dual";
+	compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
new file mode 100644
index 000000000..e891ef9b0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
new file mode 100644
index 000000000..38cd8501a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
new file mode 100644
index 000000000..3d60cc725
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts
new file mode 100644
index 000000000..5da6feba2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts7970.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 000000000..51a9bb9d6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 000000000..fc23b4d29
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
new file mode 100644
index 000000000..9eb2ef173
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 000000000..4101c6597
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
new file mode 100644
index 000000000..a5532ecc1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
new file mode 100644
index 000000000..67ed0452f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 000000000..d34189fc5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
new file mode 100644
index 000000000..7030b2654
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 000000000..aef5fcc42
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
new file mode 100644
index 000000000..5342f2f5a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 000000000..c4588fb0b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts
new file mode 100644
index 000000000..d871cac17
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-udoo.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Dual-lite Board";
+	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
new file mode 100644
index 000000000..c2946fbaa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board rev B1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
new file mode 100644
index 000000000..6d1d863c2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board revD1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
new file mode 100644
index 000000000..4a08d5a99
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
new file mode 100644
index 000000000..ebc0892e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "okay";
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <20>;
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy_port2: phy@1 {
+			reg = <1>;
+		};
+
+		phy_port3: phy@2 {
+			reg = <2>;
+		};
+
+		switch@10 {
+			compatible = "qca,qca8334";
+			reg = <10>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@2 {
+					reg = <2>;
+					label = "eth2";
+					phy-handle = <&phy_port2>;
+				};
+
+				eth1: port@3 {
+					reg = <3>;
+					label = "eth1";
+					phy-handle = <&phy_port3>;
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		chan@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		chan@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		chan@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		chan@3 {
+			chan-name = "W";
+			led-cur = /bits/ 8 <0x0>;
+			max-cur = /bits/ 8 <0x0>;
+			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+		status = "okay";
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1b898
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b098
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b098
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b098
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b098
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b018
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b018
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
new file mode 100644
index 000000000..a38c407fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Draco i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
new file mode 100644
index 000000000..a19609c7c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Hydra i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&reg_pcie {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644
index 000000000..884b23674
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Orion i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
new file mode 100644
index 000000000..f6ae24efd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Ursa i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@3;
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
new file mode 100644
index 000000000..cd3183c36
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		i2c3 = &i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		aips1: bus@2000000 {
+			pxp: pxp@20f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@20f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: bus@2100000 {
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6DL_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
+	};
+};
+
+&gpt {
+	compatible = "fsl,imx6dl-gpt";
+};
+
+&hdmi {
+	compatible = "fsl,imx6dl-hdmi";
+};
+
+&iomuxc {
+	compatible = "fsl,imx6dl-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
new file mode 100644
index 000000000..a0683b4ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3_sw>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		status = "okay";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	power-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+	 */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
+		status = "disabled";
+	};
+
+	pcie-switch@58 {
+		compatible = "plx,pex8605";
+		reg = <0x58>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	vpcie-supply = <&reg_pcie_switch>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	/*
+	 * Mux the Apalis GPIOs
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000..86e84781c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
+	compatible = "toradex,apalis_imx6q-ixora-v1.1",
+		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			label = "LED_4_GREEN";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4-red {
+			label = "LED_4_RED";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-green {
+			label = "LED_5_GREEN";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-red {
+			label = "LED_5_RED";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+	 */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	/*
+	 * Mux the Apalis GPIOs
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
new file mode 100644
index 000000000..62e72773e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			label = "LED_4_GREEN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4-red {
+			label = "LED_4_RED";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-green {
+			label = "LED_5_GREEN";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-red {
+			label = "LED_5_RED";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+	 */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
new file mode 100644
index 000000000..664b0af8f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apf6dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
+	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
new file mode 100644
index 000000000..0b40f5226
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Armadillo2 Board";
+	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio3 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-arm2 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 000000000..604f24203
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P04-hog {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 000000000..56d2aeb19
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 000000000..3d6b757bf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,290 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&stdp4028_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		reg = <0x73>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+};
+
+&pca9539 {
+	P10-hog {
+		gpio-hog;
+		gpios = <8 0>;
+		output-low;
+		line-name = "PCA9539-P10";
+	};
+
+	P11-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-low;
+		line-name = "PCA9539-P11";
+	};
+};
+
+&pci_root {
+	/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
+	bridge@1,0 {
+		compatible = "pci10b5,8605";
+		reg = <0x00010000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		bridge@2,1 {
+			compatible = "pci10b5,8605";
+			reg = <0x00020800 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			ethernet@3,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00030000 0 0 0 0>;
+			};
+		};
+
+		bridge@2,2 {
+			compatible = "pci10b5,8605";
+			reg = <0x00021000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			switch_nic: ethernet@4,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00040000 0 0 0 0>;
+			};
+		};
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "eneport1";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport2";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 000000000..133991ca8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,640 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x320000>;
+		};
+
+		partition@3f0000 {
+			label = "mfg";
+			reg = <0x3f0000 0x10000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 000000000..66be04299
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	mdio0: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085"; /* 88e6240*/
+			reg = <0>;
+
+			interrupt-parent = <&gpio2>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <10000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P12-hog {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13-hog {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14-hog {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15-hog {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16-hog {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17-hog {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+		>;
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&pcie {
+	/* Synopsys, Inc. Device */
+	pci_root: root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
new file mode 100644
index 000000000..1ad41c944
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -0,0 +1,491 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "CompuLab CM-FX6";
+	compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	awnh387_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwrseq>;
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board analog audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound_master: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+			system-clock-frequency = <2822400>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(3)
+		>;
+	};
+
+	audmux4 {
+		fsl,audmux-port = <3>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(1))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu1 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu2 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu3 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwrseq: pwrseqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi2 {
+	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
+			<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <786432000>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	mmc-pwrseq = <&awnh387_pwrseq>;
+	non-removable;
+	/*
+	 * If the OS probes the Bluetooth AMP function advertised on this bus
+	 * but the firmware in place does not support it, the WiFi/BT module
+	 * gets unresponsive.
+	 * Users who configured their OS properly can enable this node to gain
+	 * WiFi and/or plain Bluetooth support.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000..3e59ebbb3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 000000000..dab70d123
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
new file mode 100644
index 000000000..1c7b262e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
new file mode 100644
index 000000000..8bfe6337c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
+	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
new file mode 100644
index 000000000..a685b1c32
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx6q-dhcom-som.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		ddc-i2c-bus = <&i2c2>;
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
+	};
+
+	touchscreen@38 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x400120b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x400120b0
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x400120b0
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x400120b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x400120b0
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16		0x400120b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x400120b0
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x400120b0
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x400120b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x400120b0
+		>;
+	};
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x000b0
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x000b1
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27			0x120b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreen-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
new file mode 100644
index 000000000..e3de2b487
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		mmc3 = &usdhc1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {	/* S25FL116K */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		m25p,fast-read;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
+			reg = <0>;
+			max-speed = <100>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_hw300>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <787500>;
+				regulator-max-microvolt = <1527272>;
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-suspend-mem-microvolt = <1040000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1885714>;
+				regulator-max-microvolt = <3657142>;
+				lltc,fb-voltage-divider = <100000 28000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <787500>;
+				regulator-max-microvolt = <1527272>;
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-suspend-mem-microvolt = <980000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <855571>;
+				regulator-max-microvolt = <1659291>;
+				lltc,fb-voltage-divider = <100000 93100>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <3240306>;
+				regulator-max-microvolt = <3240306>;
+				lltc,fb-voltage-divider = <102000 29400>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <2484708>;
+				regulator-max-microvolt = <2484708>;
+				lltc,fb-voltage-divider = <100000 41200>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	touchscreen@49 {	/* TSC2004 */
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		vio-supply = <&reg_3p3v>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2004_hw300>;
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@56 {
+		compatible = "microcrystal,rv3029";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_hw300>;
+		reg = <0x56>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_base>;
+
+	pinctrl_hog_base: hog-base-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_100M: enet-100M-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic_hw300: pmic-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
+		>;
+	};
+
+	pinctrl_rtc_hw300: rtc-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120B0
+		>;
+	};
+
+	pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120B0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120B0
+		>;
+	};
+
+	pinctrl_usbotg: usbotg-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120B0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120B0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 000000000..16658b76f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+	compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
new file mode 100644
index 000000000..fef5d7254
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
+	compatible = "lwn,display5", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <250>;
+		enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-enable-ramp-delay = <300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		label = "tfa9879-mono";
+
+		simple-audio-card,dai-link {
+			/* DAC */
+			format = "i2s";
+			bitclock-master = <&dailink_master>;
+			frame-master = <&dailink_master>;
+
+			dailink_master: cpu {
+			    sound-dai = <&ssi2>;
+			};
+			codec {
+			    sound-dai = <&codec>;
+			};
+		};
+	};
+
+	panel: panel-lvds0 {
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(5)
+		>;
+	};
+
+	aud6 {
+		fsl,audmux-port = <5>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_RCSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_RFSDIR |
+			 IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+	status = "okay";
+
+	s25fl256s: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "SPL (spi)";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@1 {
+			label = "u-boot (spi)";
+			reg = <0x20000 0x100000>;
+			read-only;
+		};
+		partition@2 {
+			label = "uboot-env (spi)";
+			reg = <0x120000 0x10000>;
+		};
+		partition@3 {
+			label = "uboot-envr (spi)";
+			reg = <0x130000 0x10000>;
+		};
+		partition@4 {
+			label = "linux-recovery (spi)";
+			reg = <0x140000 0x800000>;
+		};
+		partition@5 {
+			label = "swupdate-fitImg (spi)";
+			reg = <0x940000 0x400000>;
+		};
+		partition@6 {
+			label = "swupdate-initramfs (spi)";
+			reg = <0xD40000 0x800000>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethernet_phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 {
+			compatible = "marvell,88E1510";
+			device_type = "ethernet-phy";
+			/* Set LED0 control: */
+			/* On - Link, Blink - Activity, Off - No Link */
+			marvell,reg-init = <3 0x10 0 0x1011>;
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: tfa9879@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6C>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* I2S OUTPUT AUD6*/
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD  0x130b0
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD  0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS  0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC  0x130b0
+		>;
+	};
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC  0x030b0
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1_vbus_grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 000000000..4dee1b22d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Data Modul AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_switch: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_switch";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usb_host1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_host1_en";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 31 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-dmo-edmqmx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi5: ecspi5rp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+			>;
+		};
+
+		pinctrl_pfuze: pfuze100grp1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+			>;
+		};
+
+		pinctrl_stmpe1: stmpe1grp {
+			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+		};
+
+		pinctrl_stmpe2: stmpe2grp {
+			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
new file mode 100644
index 000000000..137db38f0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-ba16.dtsi"
+
+/ {
+	model = "Advantech DMS-BA16";
+	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25256B", "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sys_mclk>;
+		lrclk-strength = <0x3>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	fsl,no-spread-spectrum;
+	fsl,transmit-atten-16ths = <12>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-level-mV = <1133>;
+	fsl,receive-dpll-mode = <1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts
new file mode 100644
index 000000000..0f582a9d4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
new file mode 100644
index 000000000..c63f371ed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -0,0 +1,517 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02@1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc@3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	ranges = <0 0 0x08000000 0x08000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+
+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
new file mode 100644
index 000000000..ccc2487d4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2013 Philipp Zabel
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gk802 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Recovery button, active-low */
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+				/* RTL8192CU enable GPIO, active-low */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
new file mode 100644
index 000000000..f80173458
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
new file mode 100644
index 000000000..6e1c493c9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
new file mode 100644
index 000000000..f13df8e9c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
new file mode 100644
index 000000000..e894faba5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -0,0 +1,510 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Gateworks Ventana GW5400-A";
+	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		spi0 = &ecspi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,w25q256", "jedec,spi-nor";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
new file mode 100644
index 000000000..d5d46908c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+#include <dt-bindings/media/tda1997x.h>
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&sw4_reg>;
+		DVDD-supply = <&sw4_reg>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
new file mode 100644
index 000000000..2c7feeef1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts
new file mode 100644
index 000000000..c973b7304
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw552x.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
+	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
new file mode 100644
index 000000000..e9c224cea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
new file mode 100644
index 000000000..735f2bbf1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw560x.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
new file mode 100644
index 000000000..a182e4cb0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
new file mode 100644
index 000000000..ca1e2ae33
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5904.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
new file mode 100644
index 000000000..b25526ef5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
new file mode 100644
index 000000000..6aafa2fce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
new file mode 100644
index 000000000..4dcbd943c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
new file mode 100644
index 000000000..6f511f166
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
new file mode 100644
index 000000000..b8feadbff
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: 24c02@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	h100 {
+		pinctrl_h100_hdmi: h100-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_h100_i2c1: h100-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_i2c2: h100-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_leds: pinctrl-h100-leds {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_sgtl5000: h100-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_h100_tc358743: h100-tc358743 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_uart2: h100-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			>;
+		};
+
+		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2: h100-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000..c51b4e4fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 000000000..e4132d62f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
new file mode 100644
index 000000000..8c9e94e64
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000..1998ebfa0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
new file mode 100644
index 000000000..d3ad7329c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts
new file mode 100644
index 000000000..5249f53dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
new file mode 100644
index 000000000..d51745268
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
new file mode 100644
index 000000000..81cc346dd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <10>;
+				vfront-porch = <3>;
+				hsync-len = <80>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 000000000..241811c52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
new file mode 100644
index 000000000..cf6ba724f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 000000000..fe28c3cf5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <30>;
+				hfront-porch = <30>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <64>;
+				vsync-len = <20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000..4d6a0c3e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Kontron SMARC sAMX6i Quad/Dual";
+	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
+
+/* Quad/Dual SoMs have 3 chip-select signals */
+&ecspi4 {
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl_ecspi4 {
+	fsl,pins = <
+		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+		/* SPI4_IMX_CS2# - connected to internal flash */
+		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
+		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
+		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
new file mode 100644
index 000000000..50fbf46d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Qwuad K+P TPC Board";
+	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
new file mode 100644
index 000000000..1ade0bff6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 500000>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "led1";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		red {
+			label = "led0";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "sgtl5000-supply";
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "display-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6q-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	ds1307: rtc@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
+			/* sgtl5000 sys_mclk clock routed to CLKO1 */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
new file mode 100644
index 000000000..46a4ddedb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6-logicpd-som.dtsi"
+#include "imx6-logicpd-baseboard.dtsi"
+
+/ {
+	model = "Logic PD i.MX6QD SOM-M3";
+	compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
+
+	backlight: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 20000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel-lvds0 {
+		compatible = "okaya,rs800480t-7x0gp";
+		power-supply = <&reg_lcd_reset>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_lcd: regulator-lcd {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reg>;
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+		startup-delay-us = <500000>;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reset>;
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_hdmi {
+	regulator-always-on;	/* Without this, the level shifter on HDMI doesn't turn on */
+};
+
+&iomuxc {
+	pinctrl_lcd_reg: lcdreg {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
+		>;
+	};
+
+	pinctrl_lcd_reset: lcdreset {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0	/* TOUCH_nPINTDAV */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
new file mode 100644
index 000000000..cc1801002
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Embest MarS Board i.MX6Dual";
+	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user1 {
+			label = "imx6:green:user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "imx6:green:user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* RGMII_nRST */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
new file mode 100644
index 000000000..55692c739
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016-2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
+	compatible = "lwn,mccmon6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+
+	s25sl032p: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		use-advanced-sector-protection;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19         0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
new file mode 100644
index 000000000..03bec0c53
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 000000000..eb4eecb6e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
new file mode 100644
index 000000000..435445a34
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 000000000..52e3567d1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,793 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	rxc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	txen-skew-ps = <0>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <3000>;
+	txd1-skew-ps = <3000>;
+	txd2-skew-ps = <3000>;
+	txd3-skew-ps = <3000>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
new file mode 100644
index 000000000..2e70ea562
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
+	compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000..65d2e483c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+	compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
new file mode 100644
index 000000000..affe30b02
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
+	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
new file mode 100644
index 000000000..500944bd2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
new file mode 100644
index 000000000..618d2743e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
new file mode 100644
index 000000000..7a666507b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts
new file mode 100644
index 000000000..fe5a7becc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts
new file mode 100644
index 000000000..9413f0a68
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
+	compatible = "technexion,imx6q-pico", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
new file mode 100644
index 000000000..e40409d04
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -0,0 +1,1044 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6Q_PINFUNC_H
+#define __DTS_IMX6Q_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
+#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
+#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
+#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
+#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
+#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
+#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
+#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
+#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
+#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
+#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
+#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
+#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
+#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
+#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
+#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
+#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
+#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
+#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
+#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
+#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
+#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
+#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
+#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
+#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
+#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
+#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
+#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
+#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
+#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
+#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
+#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
+#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
+#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
+#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
+#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
+#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
+#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
+#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
+#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
+#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
+#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
+#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
+#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
+#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
+#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
+#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
+#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
+#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
+#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
+#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
+#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
+#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
+#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
+#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
+#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
+#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
+#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
+#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
+#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
+#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
+#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
+#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
+#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
+#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
+#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
+#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
+#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
+#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
+#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
+#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
+#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
+#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
+#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
+#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
+#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
+#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
+#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
+#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
+#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
+#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
+#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
+#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
+#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
+#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
+#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
+#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
+#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
+#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
+#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
+#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
+#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
+#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
+#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
+#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
+#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
+#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
+#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
+#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1e4 0x4f8 0x000 0x0 0x0
+#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
+#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
+#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
+#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
+#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
+#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
+#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
+#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
+#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
+#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
+#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
+#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
+#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
+#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
+#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
+#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
+#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
+#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
+#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
+#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
+#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
+#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
+#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
+#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
+#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
+#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
+#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
+#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
+#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
+#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
+#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
+#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
+#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
+#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
+#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
+#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
+#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
+#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
+#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
+#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
+#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
+#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
+#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
+#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
+#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
+#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
+#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
+#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
+#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
+#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
+#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
+#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
+#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
+#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
+#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
+#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
+#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
+#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
+#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
+#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
+#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
+#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
+#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
+#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
+#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
+#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
+#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
+#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
+#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
+#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
+#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
+#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
+#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
+#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
+#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
+#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
+#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
+#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
+#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
+#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
+#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
+#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
+#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
+#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
+#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
+#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
+#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
+#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
+#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
+#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
+#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
+#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
+#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
+#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
+#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
+#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
+#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
+#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
+#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
+#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
+#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
+#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
+#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
+#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
+#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
+#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
+#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
+#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
+#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
+#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
+#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
+#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
+#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
+#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
+#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
+#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
+#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
+#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
+#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
+#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
+#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
+#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
+#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
+#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
+#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
+#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
+#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
+#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
+#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
+#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
+#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
+#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
+#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
+#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
+#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
+#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
+#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
+#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
+#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
+#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
+#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
+#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
+#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
+#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
new file mode 100644
index 000000000..7a33e54cc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -0,0 +1,695 @@
+/*
+ * Copyright (C) 2017 NutsBoard.Org
+ *
+ * Author: Wig Cheng <onlywig@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "NutsBoard i.MX6 Quad Pistachio board";
+	compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-sgtl5000",
+			   "fsl,imx-audio-sgtl5000";
+		model = "audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0  /*1  2  3  4  5  6*/  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <94>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ar1021@4d {
+		compatible = "microchip,ar1021-i2c";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x1b0b0   /*LCD power*/
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x1b0b0   /*backlight power*/
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /*SD3 CD pin*/
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /*codec power*/
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b0b0 /*touch reset*/
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b01 /*touch irq*/
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	 0x1b0b0/*backlight pwr*/
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0 /*gpio 5V_1*/
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0 /*gpio 5V_2*/
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x1b0b0 /*gpio 5V_3*/
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0 /*gpio 5V_4*/
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0 /*AUX_5V_EN*/
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0 /*AUX_5VB_EN*/
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0 /*AUX_3V3_EN*/
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x1b0b0 /*I2C expander pwr*/
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			/* AR8035 reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1			0x000b0 /* sys_mclk */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x130b0 /*headphone det*/
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x130b0 /*microphone det*/
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	    0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		 0x15059 /*BT_EN*/
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x15059 /*WL_EN_LDO*/
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x15059 /*WL_EN*/
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x15059 /*WL_IRQ*/
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b00
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_en_reg>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	cap-power-off-card;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
new file mode 100644
index 000000000..d8fa83eff
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_osc: can-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
new file mode 100644
index 000000000..349959d38
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
new file mode 100644
index 000000000..271f4b2d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Pro i.MX6 Quad Board";
+	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&ecspi3 {
+	flash: flash@0 {
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 000000000..6e981a3e0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
new file mode 100644
index 000000000..dc51262e7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 000000000..eec944673
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
+	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts
new file mode 100644
index 000000000..717ac62fc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-savageboard.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Quad";
+	compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
new file mode 100644
index 000000000..9054c1d58
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Pavel Machek <pavel@denx.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "MicroSys sbc6x board";
+	compatible = "microsys,sbc6x", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-sbc6x {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
new file mode 100644
index 000000000..343364d3e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2014 Soeren Moch <smoch@web.de>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS2910 Matrix ARM mini PC";
+	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1>;
+	};
+
+	ir_recv {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		blue {
+			label = "blue_status_led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc: ds1307@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
new file mode 100644
index 000000000..ab4c07c13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
new file mode 100644
index 000000000..7224c376c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
new file mode 100644
index 000000000..dce1e8671
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts
new file mode 100644
index 000000000..570bd3c30
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts7970.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 000000000..ac3050a83
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
new file mode 100644
index 000000000..4ee860b62
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 000000000..a773f2528
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
new file mode 100644
index 000000000..0a4daec8d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 000000000..9ffbb0fe7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
new file mode 100644
index 000000000..cb2fcb489
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 000000000..d43a5d8f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
new file mode 100644
index 000000000..f7b0acb65
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 000000000..387edf2b3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
new file mode 100644
index 000000000..52e9f4a21
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Quad Board";
+	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
new file mode 100644
index 000000000..d16ff2083
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -0,0 +1,355 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ *	Copyright 2013 CompuLab Ltd.
+ *	Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+	model = "CompuLab Utilite Pro";
+	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+	aliases {
+		ethernet1 = &eth1;
+		rtc0 = &em3027;
+		rtc1 = &snvs_rtc;
+	};
+
+	encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpd>;
+		type = "a";
+		ddc-i2c-bus = <&i2c_dvi_ddc>;
+		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			em3027: rtc@56 {
+				compatible = "emmicro,em3027";
+				reg = <0x56>;
+			};
+		};
+
+		i2c_dvi_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	parallel-display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		interface-pix-fmt = "rgb24";
+
+		port@0 {
+			reg = <0>;
+
+			parallel_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+};
+
+/*
+ * A single IPU is not able to drive both display interfaces available on the
+ * Utilite Pro at high resolution due to its bandwidth limitation. Since the
+ * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the
+ * SoC-internal Designware HDMI encoder forcing the latter to be connected to
+ * IPU2 instead of IPU1.
+ */
+/delete-node/&ipu1_di0_hdmi;
+/delete-node/&hdmi_mux_0;
+/delete-node/&ipu1_di1_hdmi;
+/delete-node/&hdmi_mux_1;
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hpd: hpdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1mux: i2c1muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x38
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&parallel_display_in>;
+};
+
+&pcie {
+	pcie@0,0 {
+		reg = <0x000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* non-removable i211 ethernet card */
+		eth1: intel,i211@pcie0,0 {
+			reg = <0x010000 0 0 0 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
new file mode 100644
index 000000000..635503513
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Support for Variscite DART-MX6 Carrier-board
+ *
+ * Copyright 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-var-dart.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Variscite DART-MX6 Carrier-board";
+	compatible = "variscite,dt6customboard", "fsl,imx6q";
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 248>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		back {
+			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "Key Back";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		home {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "Key Home";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		menu {
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "Key Menu";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel1: lvds-panel {
+		compatible = "sgd,gktw70sdae4se", "panel-lvds";
+		backlight = <&backlight_lvds>;
+		width-mm = <153>;
+		height-mm = <86>;
+		label = "gktw70sdae4se";
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <32000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <39>;
+			hfront-porch = <39>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <47>;
+			vsync-len = <2>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dt6-customboard-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack",
+					    "Line", "Line In";
+		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
+					    "Headphone Jack", "HPROUT",
+					    "LINE1L", "Line In",
+					    "LINE1R", "Line In";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&clks IMX6QDL_CLK_CKO>;
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	rtc@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
new file mode 100644
index 000000000..f6ccbecff
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board rev B1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
new file mode 100644
index 000000000..55331021d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board revD1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
new file mode 100644
index 000000000..0be548bee
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
new file mode 100644
index 000000000..a1c5e69d8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-zii-rdu2.dtsi"
+
+/ {
+	model = "ZII RDU2 Board";
+	compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 000000000..afec1677e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,551 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q-pinfunc.h"
+#include "imx6qdl.dtsi"
+
+/ {
+	aliases {
+		ipu1 = &ipu2;
+		spi4 = &ecspi5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	soc {
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		bus@2000000 { /* AIPS1 */
+			spba-bus@2000000 {
+				ecspi5: spi@2018000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6Q_CLK_ECSPI5>,
+						 <&clks IMX6Q_CLK_ECSPI5>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+		};
+
+		sata: sata@2200000 {
+			compatible = "fsl,imx6q-ahci";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_SATA>,
+				 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+				 <&clks IMX6QDL_CLK_AHB>;
+			clock-names = "sata", "sata_ref", "ahb";
+			status = "disabled";
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		ipu2: ipu@2800000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02800000 0x400000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>,
+				 <&clks IMX6QDL_CLK_IPU2_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 4>;
+
+			ipu2_csi0: port@0 {
+				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
+			};
+
+			ipu2_csi1: port@1 {
+				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
+			};
+
+			ipu2_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu2_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu2_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_2>;
+				};
+
+				ipu2_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_2>;
+				};
+
+				ipu2_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_2>;
+				};
+
+				ipu2_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_2>;
+				};
+			};
+
+			ipu2_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu2_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_3>;
+				};
+
+				ipu2_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_3>;
+				};
+
+				ipu2_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_3>;
+				};
+
+				ipu2_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_3>;
+				};
+			};
+		};
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
+	display-subsystem {
+		compatible = "fsl,imx-display-subsystem";
+		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
+	};
+};
+
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	compatible = "fsl,imx6q-hdmi";
+
+	port@2 {
+		reg = <2>;
+
+		hdmi_mux_2: endpoint {
+			remote-endpoint = <&ipu2_di0_hdmi>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		hdmi_mux_3: endpoint {
+			remote-endpoint = <&ipu2_di1_hdmi>;
+		};
+	};
+};
+
+&iomuxc {
+	compatible = "fsl,imx6q-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		port@2 {
+			reg = <2>;
+
+			lvds0_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds0>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds0_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		port@2 {
+			reg = <2>;
+
+			lvds1_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_lvds1>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			lvds1_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_lvds1>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mipi_dsi {
+	ports {
+		port@2 {
+			reg = <2>;
+
+			mipi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_mipi>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			mipi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_mipi>;
+			};
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
+&vpu {
+	compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 000000000..a696873dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,959 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm4 0 5000000>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-name = "usb_host_vbus_hub";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <2000>;
+		enable-active-high;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6q-apalis-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan1_default>;
+	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan2_default>;
+	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
+	status = "disabled";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
+	status = "disabled";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <8>;
+	disable-wp;
+	no-1-8-v;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <4>;
+	disable-wp;
+	no-1-8-v;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_apalis_gpio1: gpio2io04grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: gpio2io05grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: gpio2io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: gpio2io07grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: gpio6io10grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: gpio6io09grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: gpio1io02grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: gpio1io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1_default: flexcan1defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_sleep: flexcan1slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+		>;
+	};
+
+	pinctrl_flexcan2_default: flexcan2defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+	pinctrl_flexcan2_sleep: flexcan2slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: gpioresetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: gpiosdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
new file mode 100644
index 000000000..b78ed7974
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <15>;
+		power-off-delay-us = <70>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <38400000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x130b0 /* WL_EN */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x130b0 /* WL_IRQ */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
new file mode 100644
index 000000000..2577eb4f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_5v>;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user-led {
+			label = "User LED";
+			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3p3v>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "fsl,imx6-armadeus-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-armadeus-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>,
+		   <&gpio4 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* GSM */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
+		>;
+	};
+
+	pinctrl_gsm: gsmgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp0: ipu1disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
new file mode 100644
index 000000000..baa197c90
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	imx6qdl-aristainetos {
+		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+		};
+
+		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+			>;
+		};
+
+		pinctrl_ecspi4: ecspi4grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+				>;
+		};
+
+		pinctrl_gpio: gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu_disp: ipudisp1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+				>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
new file mode 100644
index 000000000..ff8cb47fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -0,0 +1,627 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <04 0x8>;
+
+		regulators {
+			bcore1 {
+				regulator-name = "bcore1";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bcore2 {
+				regulator-name = "bcore2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bpro {
+				regulator-name = "bpro";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bperi {
+				regulator-name = "bperi";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bmem {
+				regulator-name = "bmem";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5 {
+				regulator-name = "ldo5";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6 {
+				regulator-name = "ldo6";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7 {
+				regulator-name = "ldo7";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8 {
+				regulator-name = "ldo8";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9 {
+				regulator-name = "ldo9";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo10 {
+				regulator-name = "ldo10";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo11 {
+				regulator-name = "ldo11";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bio {
+				regulator-name = "bio";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	expander: tca6416@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50{
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@57{
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
+	};
+
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
new file mode 100644
index 000000000..7672fbfc2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+&iomuxc {
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	wakeup-source;
+	keep-power-in-suspend;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
new file mode 100644
index 000000000..1e86b3814
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm3 0 5000000>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-colibri-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+		lrclk-strength = <3>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	disable-wp;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh_oc_1>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblon {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeys {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_mic_gnd: gpiomicgnd {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccd {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+		>;
+	};
+
+	pinctrl_usbc_id_1: usbc_id-1 {
+		fsl,pins = <
+			/* USBC_ID */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			/* Data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwr {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwe {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio-1 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio-2 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio-3 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio-4 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio-5 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio-6 {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
new file mode 100644
index 000000000..67042793b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 9 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_ir>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+		front {
+			active-low;
+			label = "imx6:red:front";
+			max-brightness = <248>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "Integrated SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
+
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	cubox_i {
+		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_cubox_i_ir: cubox-i-ir {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_spdif: cubox-i-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
+		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
+			/*
+			 * The Cubox-i pulls ID low, but as it's pointless
+			 * leaving it as a pull-up, even if it is just 10uA.
+			 */
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
+		};
+
+		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+		};
+
+		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_gpio_key: gpio-key {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 000000000..2c1d6f28e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dummy_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "dummy-supply";
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-dfi-fs700-m60 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+			>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
new file mode 100644
index 000000000..c4e146f33
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/ {
+	aliases {
+		boardid = &boardid;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		mmc3 = &usdhc4;
+	};
+
+	reg_wall_5p0: reg-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: reg-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: reg-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: reg-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <12000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "emCON-avari-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	captouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	boardid: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&rgb_encoder {
+	status = "okay";
+};
+
+&rgb_panel {
+	compatible = "edt,etm0700g0bdh6";
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	uart-has-rtscts;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
new file mode 100644
index 000000000..7228b894a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	model = "emtrion SoM emCON-MX6";
+	compatible = "emtrion,emcon-mx6";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &ds1307;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_emcon_wake>;
+
+		wake {
+			label = "Wake";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_som_leds>;
+
+		green {
+			label = "som:green";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		red {
+			label = "som:red";
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bl>;
+		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+
+	pwm_fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&pwm4 0 50000>;
+		cooling-levels = <0 64 127 191 255>;
+		status = "disabled";
+	};
+
+
+	rgb_encoder: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_display>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			rgb_encoder_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			rgb_encoder_out: endpoint {
+				remote-endpoint = <&rgb_panel_in>;
+			};
+		};
+	};
+
+	rgb_panel: lcd {
+		backlight = <&rgb_backlight>;
+		power-supply = <&reg_parallel_disp>;
+
+		port {
+			rgb_panel_in: endpoint {
+				remote-endpoint = <&rgb_encoder_out>;
+			};
+		};
+	};
+
+	reg_parallel_disp: reg-parallel-display {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl_en>;
+		regulator-name = "LCD-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_disp: reg-lvds-display {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rgb_backlight: rgb-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl>;
+		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <
+			250 176 160 144 128 112
+			96 80 64 48 32 16 8 1
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		<&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nor_flash>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <50>;
+	phy-supply = <&vdd_1V8_reg>;
+	phy-handle = <&ksz9031>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ksz9031: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+			rxdv-skew-ps = <480>;
+			txen-skew-ps = <480>;
+			rxd0-skew-ps = <480>;
+			rxd1-skew-ps = <480>;
+			rxd2-skew-ps = <480>;
+			rxd3-skew-ps = <480>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <360>;
+			txd3-skew-ps = <360>;
+			txc-skew-ps = <1020>;
+			rxc-skew-ps = <960>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	da9063: pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "dlg,da9063-watchdog";
+			timeout-sec = <0>;
+		};
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_CORE";
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_SOC";
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_sata_reg: ldo3 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			vdd_mipi_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi_reg: ldo6 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_pcie_reg: ldo7 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_1V8_reg: ldo8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_3V3_sdc_reg: ldo9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1V2_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ds1307: rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x1b060
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x130B0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x1b060
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_cpi1: csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1
+		>;
+	};
+
+	/*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27			0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x100b1
+		>;
+	};
+
+	pinctrl_emcon_gpio1: emcongpio1 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio2: emcongpio2 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio3: emcongpio3 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio4: emcongpio4 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio5: emcongpio5 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio6: emcongpio6 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio7: emcongpio7 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio8: emcongpio8 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_a: emconirqa {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_b: emconirqb {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_c: emconirqc {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_pwr: emconirqpwr {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_wake: emconwake {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001a0b1
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b058
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x1b0b0
+		 >;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4000b070
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b870
+		>;
+	};
+
+	pinctrl_irq_touch1: irqtouch1 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_irq_touch2: irqtouch2 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_bl: lvdsbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09		0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_reg: lvdsreggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__GPIO7_IO10			0x0b0b1
+		>;
+	};
+
+
+	pinctrl_nor_flash: norflashgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x100b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b1
+		>;
+	};
+
+	pinctrl_pcie_ctrl: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x0b0b1
+		>;
+	};
+
+	pinctrl_pwm_fan: pwmfan {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl: rgbbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08		0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl_en: rgbenable {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb24_display: rgbgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_secure: securegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x1b0b1
+		>;
+	};
+
+	pinctrl_som_leds: somledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00			0x0b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_spdif_in: spdifin {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif_out: spdifout {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_host1: usbhgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__USB_H1_PWR			0x1B058
+			MX6QDL_PAD_EIM_D30__USB_H1_OC			0x1B058
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID		0x17059
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07			0x17059
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x17059
+			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__SD1_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x17059
+			MX6QDL_PAD_GPIO_4__SD2_CD_B			0x1b0b1
+			MX6QDL_PAD_GPIO_2__SD2_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&rgb_encoder_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_ctrl>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_host1>;
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	vbus-supply = <&reg_usb_otg>;
+	dr_mode = "peripheral";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	fsl,wp-controller;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	fsl,wp-controller;
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+/******device power Management*********/
+
+&cpu0 {
+	voltage-tolerance = <2>;
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+/*******Disabled HW following***********/
+
+&snvs_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
new file mode 100644
index 000000000..3c04b5a4f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
new file mode 100644
index 000000000..959d8ac2e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,780 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
new file mode 100644
index 000000000..8072ed47c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 2>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
new file mode 100644
index 000000000..8c9bcdd39
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound-analog {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
+			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_backlight: pwm4grpbacklight {
+		fsl,pins = <
+			/* LVDS_PWM J6.5 */
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4_dio: pwm4grpdio {
+		fsl,pins = <
+			/* DIO3 J16.4 */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
new file mode 100644
index 000000000..e5d803d02
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -0,0 +1,697 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: HDMI In analog */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio_exp: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3>;
+		AVDD-supply = <&reg_1p8b>;
+		DVDD-supply = <&reg_1p8a>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
new file mode 100644
index 000000000..290a607fe
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay"; };
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 000000000..c15b9cc63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,737 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3v: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: microSD VDD_1P8 */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
new file mode 100644
index 000000000..f520e3376
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -0,0 +1,933 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-keypad {
+		compatible = "gpio-backlight";
+		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1p4v: regulator-vddsoc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_soc";
+		regulator-min-microvolt = <1400000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x34>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+			         MATRIX_KEY(0x00, 0x00, BTN_1)
+			         MATRIX_KEY(0x01, 0x01, BTN_2)
+			         MATRIX_KEY(0x01, 0x00, BTN_3)
+			         MATRIX_KEY(0x02, 0x00, BTN_4)
+			         MATRIX_KEY(0x00, 0x03, BTN_5)
+			         MATRIX_KEY(0x00, 0x02, BTN_6)
+			         MATRIX_KEY(0x01, 0x03, BTN_7)
+			         MATRIX_KEY(0x01, 0x02, BTN_8)
+			         MATRIX_KEY(0x02, 0x02, BTN_9)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.931) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <796551>;
+				regulator-max-microvolt = <1544827>;
+				lltc,fb-voltage-divider = <243000 261000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw4 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1050000>;
+				lltc,fb-voltage-divider = <78700 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* AUD4 */
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			/* AUD6 */
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_flexcan: flexcangrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
new file mode 100644
index 000000000..e1c8dd233
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -0,0 +1,795 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_12p0: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320";
+		model = "imx-tlv320";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic3105>;
+		/* routing of sink, source */
+		audio-routing =
+			/* TLV320 LINE1L pin <-> Mic Jack connector */
+			"LINE1L", "Mic Jack",
+			/* board Headphone Jack <-> HPOUT */
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
+			reg_1p8v: sw1 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw4 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_soc>;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.38): */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <1002777>;
+				regulator-max-microvolt = <1002777>;
+				lltc,fb-voltage-divider = <100000 261000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tlv320aic3105: codec@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
+		/* Regulators */
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8451";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT2";
+	};
+
+	/* headphone detect */
+	ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		ti,micbias = <4>; /* 2.5V micbias */
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: g101evn010 {
+				clock-frequency = <68930000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	max-frequency = <100000000>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* I2C3 */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+
+			/* Headphone Detect */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
+
+			/* Codec */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
+
+			/* Touch Controller */
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
+
+			/* Stow Sensor */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
+
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
new file mode 100644
index 000000000..3cd2e717c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -0,0 +1,812 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan1";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&fec>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
new file mode 100644
index 000000000..21c68a55b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
new file mode 100644
index 000000000..852601d5a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_wl>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
new file mode 100644
index 000000000..797f16024
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
new file mode 100644
index 000000000..7a2628fdd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
new file mode 100644
index 000000000..2ffb21dd8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,368 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+	status = "okay";
+
+	/* Pro baseboard model */
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	/* Pro baseboard model */
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	hummingboard {
+		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_pwm1: pwm1grp {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+		};
+
+		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard_spdif: hummingboard-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			>;
+		};
+
+		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 pinctrl-names = "default";
+	 status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
new file mode 100644
index 000000000..f40040538
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	hummingboard2 {
+		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+	vmmc-supply = <&v_3v2>;
+	vqmmc-supply = <&v_3v2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000..eb1ad2894
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hummingboard2 {
+		pinctrl_hog: hoggrp {
+		fsl,pins = <
+				/*
+				 * 36 pin headers GPIO description. The pins
+				 * numbering as following -
+				 *
+				 * 	3.2v	5v	74	75
+				 *	73	72	71	70
+				 *	69	68	67	66
+				 *
+				 *	77	78	79	76
+				 *	65	64	61	60
+				 *	53	52	51	50
+				 *	49	48	166	132
+				 *	95	94	90	91
+				 *	GND	54	24	204
+				 *
+				 * The GPIO numbers can be extracted using
+				 * signal name from below.
+				 * Example -
+				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+				 *
+				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+				 * number is : gpio number = (X-1) * 32 + Y
+				 */
+				/* DI1_PIN15 */
+				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+				/* DI1_PIN02 */
+				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+				/* DISP1_DATA00 */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+				/* DISP1_DATA01 */
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+				/* DISP1_DATA02 */
+				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+				/* DISP1_DATA03 */
+				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+				/* DISP1_DATA04 */
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+				/* DISP1_DATA05 */
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+				/* DISP1_DATA06 */
+				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+				/* DISP1_DATA07 */
+				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+				/* DI1_D0_CS */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+				/* DI1_D1_CS */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+				/* DI1_PIN01 */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+				/* DI1_PIN03 */
+				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+				/* DISP1_DATA08 */
+				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+				/* DISP1_DATA09 */
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+				/* DISP1_DATA10 */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+				/* DISP1_DATA11 */
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+				/* DISP1_DATA12 */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+				/* DISP1_DATA13 */
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+				/* DISP1_DATA14 */
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+				/* DISP1_DATA15 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+				/* DISP1_DATA16 */
+				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+				/* DISP1_DATA17 */
+				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+				/* DISP1_DATA18 */
+				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+				/* DISP1_DATA19 */
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+				/* DISP1_DATA20 */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+				/* DISP1_DATA21 */
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+				/* DISP1_DATA22 */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+				/* DISP1_DATA23 */
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+				/* DI1_DISP_CLK */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+				/* SPDIF_IN */
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+				/* SPDIF_OUT */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+				/* MikroBUS GPIO pin number 10 */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+			>;
+		};
+
+		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+			>;
+		};
+
+		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+			>;
+		};
+
+		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+
+		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 000000000..0fd7f2e24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 000000000..a4217f564
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0x0>;
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmcc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmcc-supply = <&reg_sd4_vmmc>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 000000000..23c318d96
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 100000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
new file mode 100644
index 000000000..37d94aa45
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 (C) Priit Laes <plaes@plaes.org>
+ * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	reg_1p0v_s0: regulator-1p0v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V0_S0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V35_VCOREDIG_S5";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_1p8v_s5: regulator-1p8v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S5";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s0: regulator-3p3v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s5: regulator-3p3v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdbklt_en>;
+		regulator-name = "LCD_BKLT_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdvdd_en>;
+		regulator-name = "LCD_VDD_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_rtc: regulator-smarc-rtc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_RTC_BATT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Module supply range can be 3.00V ... 5.25V */
+	reg_smarc_suppy: regulator-smarc-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_WIDE";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lcd: lcd {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+			};
+		};
+	};
+
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		pwm-names = "LCD_BKLT_PWM";
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <4>;
+
+		power-supply = <&reg_smarc_lcdbklt>;
+		status = "disabled";
+	};
+
+	i2c_intern: i2c-gpio-intern {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
+		sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_lcd: i2c-gpio-lcd {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
+		sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c_cam: i2c-gpio-cam {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
+		sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+/* I2S0, I2S1 */
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
+		>;
+	};
+
+	audmux_adu3 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+
+	audmux_ssi2 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_adu4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
+		>;
+	};
+};
+
+/* CAN0 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* CAN1 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		   <&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+/* SPI0 */
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* default boot source: workaround #1 for errata ERR006282 */
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+/* GBE */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+};
+
+&i2c_intern {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_v_core_s0: sw1ab {
+				regulator-name = "V_CORE_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vddsoc_s0: sw1c {
+				regulator-name = "V_VDDSOC_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_3p15v_s0: sw2 {
+				regulator-name = "V_3V15_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* sw3a/b is used in dual mode, but driver does not
+			 * support it. Although, there's no need to control
+			 * DDR power - so just leaving dummy entries for sw3a
+			 * and sw3b for now.
+			 */
+			sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_1p8v_s0: sw4 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* Regulator for USB */
+			reg_5p0v_s0: swbst {
+				regulator-name = "V_5V0_S0";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * Per schematics, of all VGEN's, only VGEN5 has some
+			 * usage ... but even that - over DNI resistor
+			 */
+			vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_2p5v_s0: vgen5 {
+				regulator-name = "V_2V5_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* I2C_GP */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+/* HDMI_CTRL */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+/* I2C_PM */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	smarc_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+
+			/* AUDIO MCLK */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26  0x1b0b0 /* CS0 */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+			/* SPI_IMX_CS2# - connected to internal flash */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x1b0b0	/* GPIO0 / CAM0_PWR# */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x1b0b0 /* GPIO1 / CAM1_PWR# */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x1b0b0 /* GPIO2 / CAM0_RST# */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x1b0b0 /* GPIO3 / CAM1_RST# */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x1b0b0 /* GPIO4 / HDA_RST#  */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05	0x1b0b0 /* GPIO5 / PWM_OUT   */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06	0x1b0b0 /* GPIO6 / TACHIN    */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07	0x1b0b0 /* GPIO7 / PCAM_FLD  */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x1b0b0 /* GPIO8 / CAN0_ERR# */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x1b0b0 /* GPIO9 / CAN1_ERR# */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x1b0b0 /* GPIO10            */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x1b0b0 /* GPIO11            */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+		>;
+	};
+
+	pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0 /* SCL */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30  0x1b0b0 /* SCL */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00  0x100f1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01  0x100f1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02  0x100f1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03  0x100f1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04  0x100f1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05  0x100f1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06  0x100f1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07  0x100f1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08  0x100f1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09  0x100f1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
+
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f1 /* HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f1 /* VSYNC */
+		>;
+	};
+
+	pinctrl_lcdbklt_en: lcdbkltengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_lcdvdd_en: lcdvddengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+		>;
+	};
+
+	pinctrl_mipi_csi: mipi-csigrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1	0x000b0	/* CSI0/1 MCLK */
+		>;
+	};
+
+	pinctrl_mgmt_gpios: mgmt-gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0	/* LID#           */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17		0x1b0b0	/* SLEEP#         */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0	/* CHARGING#      */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0	/* CHARGER_PRSNT# */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x1b0b0	/* CARRIER_STBY#  */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0	/* BATLOW#        */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0	/* TEST#          */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0	/* VDD_IO_SEL_D#  */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* POWER_BTN#     */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18	0x1b0b0 /* PCI_A_PRSNT# */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A#  */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE#   */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
+			/* power, oc muxed but not used by the driver */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0 /* USB power */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0 /* USB OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog1: wdog1rp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
+
+&mipi_csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi_csi>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+/* LCD_BKLT_PWM */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&reg_v_core_s0>;
+};
+
+&reg_pu {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+&reg_soc {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+/* SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SER1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+/* SER2 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+};
+
+/* SER3 */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+/* USB0 */
+&usbotg {
+	/*
+	 * no 'imx6-usb-charger-detection'
+	 * since USB_OTG_CHD_B pin is not wired
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+/* USB1/2 via hub */
+&usbh1 {
+	vbus-supply = <&reg_5p0v_s0>;
+};
+
+/* SDIO */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+};
+
+/* SDMMC */
+&usdhc4 {
+	/* Internal eMMC, optional on some boards */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&reg_3p3v_s0>;
+	vqmmc-supply = <&reg_1p8v_s0>;
+};
+
+&wdog1 {
+	/* CPLD is feeded by watchdog (hardwired) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000..b7e74d859
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,572 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000..a88323ac6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p8v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2c2mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c3mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	imx6q-nitrogen6-max {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2mux: i2c2muxgrp {
+			fsl,pins = <
+				/* ov5642 camera i2c enable */
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+				/* ov5640_mipi camera i2c enable */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				/* PCIe I2C enable */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				/* PCIe reset */
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_rv4162: rv4162grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+				/* RS485 RX Enable: pull up */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+				/* RS485 DEN: pull down */
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+				/* RS485/!RS232 Select: pull down (rs232) */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+				/* ON: pull down */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 000000000..ee7e2371f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_som2-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x030b0
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000..5adeb7aed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_wlan_vmmc: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-nitrogen6x {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
new file mode 100644
index 000000000..019938562
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+
+/ {
+	aliases {
+		rtc0 = &i2c_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		status = "okay";
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+		status = "disabled";
+
+		red {
+			label = "phyboard-mira:red";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "phyboard-mira:green";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "phyboard-mira:blue";
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_en_switch: regulator-en-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_en_switch>;
+		regulator-name = "Enable Switch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	reg_flexcan1: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_en>;
+		regulator-name = "flexcan1-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "mPCIe_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "auo,g104sn02";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_en>;
+		power-supply = <&reg_panel>;
+		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1>;
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	stmpe: touchctrl@44 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		reg = <0x44>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_NONE>;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x68>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "disabled";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_panel_en: panelen1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_en_switch: enswitchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
+		>;
+	};
+
+	pinctrl_gpioleds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 000000000..d434868e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	regulators {
+		sound_1v8: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "i2s-audio-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		sound_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "i2s-audio-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	tlv320_mclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		clock-output-names = "tlv320-mclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "OnboardTLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"MIC3L", "Mic Jack",
+			"MIC3R", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
+};
+
+&audmux {
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			0x00000000
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: tlv320@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&sound_3v3>;
+		IOVDD-supply = <&sound_3v3>;
+		DRVDD-supply = <&sound_3v3>;
+		DVDD-supply = <&sound_1v8>;
+	};
+
+	stmpe@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+	};
+
+	rtc@51 {
+		compatible = "epson,rtc8564";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 000000000..33a70f436
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 0>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 0 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+
+	som_flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	som_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		interrupt-controller;
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-phytec-pfla02 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
+				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..41ebe4599
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+
+/ {
+	aliases {
+		rtc1 = &da9062_rtc;
+		rtc2 = &snvs_rtc;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x8000000>;
+	};
+
+	gpio_leds_som: somleds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+
+		som-led-green {
+			label = "phycore:green";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vdd_eth_io>;
+	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			reg = <3>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic: pmic@58 {
+		compatible = "dlg,da9062";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		da9062_rtc: rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+			dlg,use-sw-pm;
+		};
+
+		regulators {
+			vdd_arm: buck1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_soc: buck2 {
+				regulator-name = "vdd_soc";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_1p5: buck3 {
+				regulator-name = "vdd_ddr3";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_eth_1p2: buck4 {
+				regulator-name = "vdd_eth";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_snvs: ldo1 {
+				regulator-name = "vdd_snvs";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_high: ldo2 {
+				regulator-name = "vdd_high";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io: ldo3 {
+				regulator-name = "vdd_eth_io";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vdd_emmc_1p8: ldo4 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm>;
+};
+
+&reg_pu {
+	vin-supply = <&vdd_soc>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS2__NAND_CE2_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS3__NAND_CE3_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
new file mode 100644
index 000000000..3a968782e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
new file mode 100644
index 000000000..144c4727f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
new file mode 100644
index 000000000..3d56a4216
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
new file mode 100644
index 000000000..b823dce62
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
new file mode 100644
index 000000000..f7a56d6b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+
+	codec_osc: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-pico-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&codec_osc>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		wakeup-source;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 000000000..70dfa07a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
new file mode 100644
index 000000000..de514eb5a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-rex {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				/* Phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				/* user led */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+			>;
+		};
+
+		pinctrl_pca9535: pca9535grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+		   >;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
new file mode 100644
index 000000000..17535bf12
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000..0aa1a0a28
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,768 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_1p5v: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "1P5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		reg_1p8v: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p8v: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "2P8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	mipi_xclk: mipi_xclk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+		clock-output-names = "mipi_pwm3";
+		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera@40 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x40>;
+		clocks = <&mipi_xclk>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	ov5642: camera@42 {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		reg = <0x42>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-sabrelite {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
new file mode 100644
index 000000000..758c62fb9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -0,0 +1,841 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply";
+		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sensors: regulator-sensors {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensors_reg>;
+		regulator-name = "sensors-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"DMIC", "MICBIAS",
+			"DMICDAT", "DMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_sensors>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabresd {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+			>;
+		};
+
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			>;
+		};
+
+		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_sensors_reg: sensorsreggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
new file mode 100644
index 000000000..02e6d36e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
+		backlight = <&panel_bl>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <4>;
+		power-supply = <&reg_3p3v>;
+		pwms = <&pwm1 0 10000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_emmc: emmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sd: sdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			/* CD pin */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 000000000..b55af61df
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 000000000..5f3b8baab
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_usdhc3: microsom-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 000000000..352ac585c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	nvcc_sd1: regulator-nvcc-sd1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "nvcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	clk_ti_wifi: ti-wifi-clock {
+		/* This is a hack around the kernel - using "fixed clock"
+		 * results in the "pinctrl" properties being ignored, and
+		 * the clock not being output.  Instead, use a gated clock
+		 * and the unrouted WL_XTAL_PU gpio.
+		 */
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwrseq_ti_wifi: ti-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_ti_bt: microsom-ti-bt {
+			fsl,pins = <
+				/* BT_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_clk: microsom-ti-clk {
+			fsl,pins = <
+				/* EXT_32K */
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				/* WL_XTAL_PU (unrouted) */
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+			fsl,pins = <
+				/* WLAN_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+			fsl,pins = <
+				/* WLAN_IRQ */
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+	};
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
new file mode 100644
index 000000000..c56337b63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii-id";
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				/* AR8035 reset */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+				/* AR8035 interrupt */
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+				/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+				/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+				/*
+				 * As the RMII pins are also connected to RGMII
+				 * so that an AR8030 can be placed, set these
+				 * to high-z with the same pulls as above.
+				 * Use the GPIO settings to avoid changing the
+				 * input select registers.
+				 */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+			>;
+		};
+
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
new file mode 100644
index 000000000..b18b83ac6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+			 /* eCSPI1 SS1 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
+
+&pmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+	regulators {
+		reg_vddcore: sw1ab {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_vddsoc: sw1c {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_gen_3v3: sw2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5a: sw3a {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5b: sw3b {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		sw4_reg: sw4 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5v_600mA: swbst {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5150000>;
+			regulator-always-on;
+		};
+
+		reg_snvs_3v: vsnvs {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		reg_vrefddr: vrefddr {
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_vgen1_1v5: vgen1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			/* not used */
+		};
+
+		reg_vgen2_1v2_eth: vgen2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-always-on;
+		};
+
+		reg_vgen3_2v8: vgen3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen4_1v8: vgen4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen5_1v8_eth: vgen5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen6_3v3: vgen6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-sdio;
+	bus-width = <8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
new file mode 100644
index 000000000..b679bec78
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
new file mode 100644
index 000000000..49c472285
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
new file mode 100644
index 000000000..f88da757e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
new file mode 100644
index 000000000..966038ecc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -0,0 +1,594 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-Faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		yel-led {
+			label = "yellow-led";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-led {
+			label = "blue-led";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		en-usb-5v {
+			label = "en-usb-5v";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		sel_dc_usb {
+			label = "sel_dc_usb";
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: reg_can1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can1_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: en-reg_can2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator_wlan_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_vmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <
+		&gpio5 31 GPIO_ACTIVE_LOW
+		&gpio7 12 GPIO_ACTIVE_LOW
+		&gpio5 18 GPIO_ACTIVE_LOW
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	m41t00s: rtc@68 {
+		compatible = "m41t00";
+		reg = <0x68>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isl,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts7970-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <62>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard Flash CS */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2 {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO     0x100b1
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31      0x100b1 /* FPGA_SPI_CS0 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12         0x100b1 /* FPGA_SPI_CS1 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18     0x100b1 /* HD1_SPI_CS */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21      0x1b088 /* FPGA_RESET */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20    0x1b088 /* FPGA_IRQ_0 */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04          0x1b088 /* FPGA_IRQ_1 */
+		>;
+	};
+
+	pinctrl_enet: enet {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b088
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b088 /* ETH_PHY_RESET */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b088
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b088
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b088 /* EN_CAN_1 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b088
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b088
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b088 /* EN_CAN_2 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Onboard */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b088 /* USB_HUB_RESET */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b088 /* SEL_DC_USB */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b088 /* EN_USB_5V */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b088 /* JTAG_FPGA_TMS */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b088 /* JTAG_FPGA_TCK */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b088 /* JTAG_FPGA_TDO */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b088 /* JTAG_FPGA_TDI */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b088 /* GYRO_INT */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b088 /* MODBUS_FAULT */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b088 /* BUS_DIR/JP_SD_BOOT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b088 /* EN_MODBUS_24V */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b088 /* EN_MODBUS_3V */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b088 /* I210_RESET */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b088 /* EN_RTC_PWR */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b088 /* REVSTRAP1 */
+
+			/* Offboard */
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b088 /* LCD_D09 */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b088 /* HD1_IRQ */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b088 /* LCD_D10 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b088 /* LCD_D11 */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b088 /* BUS_BHE */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b088 /* BUS_ALE */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b088 /* BUS_CS */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b088 /* DIO_20 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b088 /* BUS_WAIT */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b088 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b088 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b088 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b088 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b088 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b088 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b088 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b088 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b088 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b088 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b088 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b088 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b088 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b088 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b088 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b088 /* MUX_AD_15 */
+
+			/* Strapping only */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b088
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b088
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b088 /* GREEN_LED */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b088 /* RED_LED */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b088 /* YEL_LED */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b088 /* IMX6_BLUE_LED */
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b088
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b088
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b088
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b088
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b088
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b088
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b088 /* EN_SD_POWER */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	bus-width = <4>;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 000000000..79f235488
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		turn-on-delay-ms = <35>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				u-boot,panel-name = "edt,et057090dhu";
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				u-boot,panel-name = "edt,et0350g0dh6";
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				u-boot,panel-name = "edt,et0430g0dh6";
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				u-boot,panel-name = "edt,etm0700g0dh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				u-boot,panel-name = "edt,etm0700g0edh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 000000000..2ca2eb37e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lvds0_panel: lvds0-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight0>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	lvds1_panel: lvds1-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight1>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		display-timings {
+			hsd100pxn1 {
+				u-boot,panel-name = "hannstar,hsd100pxn1";
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			nl12880bc20 {
+				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0700 {
+				u-boot,panel-name = "edt,etm0700g0dh6";
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				u-boot,panel-name = "edt,et057090dhu";
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+
+		display-timings {
+			hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 000000000..410972e1d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	backlight0 {
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		turn-on-delay-ms = <35>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	backlight1 {
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		turn-on-delay-ms = <35>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	lcd-panel {
+		compatible = "edt,et057090dhu";
+		pixelclk-active = <0>;
+	};
+
+	lvds0-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+
+	lvds1-panel {
+		compatible = "edt,etml1010g0dka";
+		pixelclk-active = <0>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	/*
+	 * The backup voltage of the module internal RTC is not wired
+	 * by default on the MB7, so disable that RTC chip.
+	 */
+	status = "disabled";
+};
+
+&i2c3 {
+	rtc: mcp7940x@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
new file mode 100644
index 000000000..362e65cca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -0,0 +1,809 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		ethernet0 = &fec;
+		lcdif-23bit-pins-a = &pinctrl_disp0_1;
+		lcdif-24bit-pins-a = &pinctrl_disp0_2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		reg-can-xcvr = &reg_can_xcvr;
+		stk5led = &user_led;
+		usbotg = &usbotg;
+		sdhc0 = &usdhc1;
+		sdhc1 = &usdhc2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_user_led>;
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3_etn: regulator-3v3-etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lcd0_pwr: regulator-lcd0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_lcd1_pwr: regulator-lcd1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,imx6qdl-tx6-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+	status = "disabled";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-reset-post-delay = <10>;
+	phy-handle = <&etnphy>;
+	phy-supply = <&reg_3v3_etn>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy_int>;
+			interrupt-parent = <&gpio7>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
+		>;
+	};
+
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
+			MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0 /* Reset */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0 /* Wake */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+		>;
+	};
+
+	pinctrl_etnphy_int: etnphy-intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
+		>;
+	};
+
+	pinctrl_etnphy_rst: etnphy-rstgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
+			MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
+			MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
+			MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
+			MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
+			MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
+			MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
+		>;
+	};
+
+	pinctrl_lcd0_pwr: lcd0-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
+		>;
+	};
+
+	pinctrl_lcd1_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
+			MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
+		>;
+	};
+
+	pinctrl_user_led: user-ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
+		>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
+		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
+		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
+		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
+		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
+		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
+		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
+		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
+		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
+		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
+		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
+	>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
new file mode 100644
index 000000000..ccfa8e320
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+			gpio = <&gpio7 12 0>;
+		};
+
+		reg_panel: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd_panel";
+			enable-active-high;
+			gpio = <&gpio1 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	imx6q-udoo {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+			>;
+		};
+
+		pinctrl_panel: panelgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+			>;
+		};
+
+		pinctrl_power_off: poweroffgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+			>;
+		};
+
+		pinctrl_touchscreenp7: touchscreenp7grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh: usbhgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_running: ac97running {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_warm_reset: ac97warmreset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_reset: ac97reset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	clocks = <&clks IMX6QDL_CLK_CKO>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
new file mode 100644
index 000000000..c41cac502
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Support for Variscite DART-MX6 Module
+ *
+ * Copyright 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c1>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tlv320aic3106: codec@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		#sound-dai-cells = <0>;
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		ai3x-ocmv = <0>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			/* Audio Clock */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_bt: bt {
+		fsl,pins = <
+			/* Bluetooth enable */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
+			/* Bluetooth Slow Clock */
+			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS0 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			/* SPI1 CS1 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC INT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170F9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170F9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170F9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170F9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+};
+
+&pcie {
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 000000000..e781a4578
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 000000000..3874e7470
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 000000000..b9b698f72
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "ETH_PHY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__USB_OTG_PWR		0x80000000	/* USB Power Enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
new file mode 100644
index 000000000..5bad982bc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6qdl-wandboard {
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_mclk: mclkgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_ov5645: ov5645grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usbotgvbus: usbotgvbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
new file mode 100644
index 000000000..66b15748e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio1;
+		rtc0 = &ds1341;
+	};
+
+	mdio1: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio1>;
+		gpios = <&gpio6 5 GPIO_ACTIVE_HIGH
+		         &gpio6 4 GPIO_ACTIVE_HIGH>;
+
+		phy: ethernet-phy@0 {
+			pinctrl-0 = <&pinctrl_rmii_phy_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	reg_28p0v: regulator-28p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "28V_IN";
+		regulator-min-microvolt = <28000000>;
+		regulator-max-microvolt = <28000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_28p0v>;
+		regulator-name = "12V_MAIN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_pmic: regulator-3p3v-pmic {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "PMIC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3v_pmic>;
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_sd: regulator-3p3v-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3p3v_sd>;
+		vin-supply = <&reg_3p3v>;
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v_display: regulator-3p3v-display {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "3V3_DISPLAY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v_ssd: regulator-3p3v-ssd {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0v>;
+		regulator-name = "3V3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound1_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Back";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		sound2_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	panel {
+		power-supply = <&reg_3p3v_display>;
+		backlight = <&sp_backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	disp0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			disp0_in_0: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			disp0_out: endpoint {
+				remote-endpoint = <&tc358767_in>;
+			};
+		};
+	};
+
+	cs2000_ref: cs2000-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: cs2000-in-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	edp_refclk: edp-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+	                         <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&cpu0 {
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC-PU uV */
+		1200000 1300000
+		996000	1275000
+		852000	1275000
+		792000	1200000
+		396000	1200000
+	>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		sp_backlight: backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,m25p128", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1 {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	accel@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio1>;
+		interrupt-names = "INT2";
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+
+	edp-bridge@68 {
+		compatible = "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc358767>;
+		reg = <0x68>;
+		shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		clock-names = "ref";
+		clocks = <&edp_refclk>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				tc358767_in: endpoint {
+					remote-endpoint = <&disp0_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pfuze100_irq>;
+		reg = <0x08>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	temp-sense@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_5p0v_main>;
+		vio-supply = <&reg_3p3v>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+	touchscreen@2a {
+		compatible = "eeti,exc3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x2a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+		status = "disabled";
+	};
+
+	reg_5p0v_user_usb: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002_pins>;
+		reg = <0x32>;
+		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "a_det", "alert";
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&disp0_in_0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	host@0 {
+		reg = <0 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		i210: i210@0 {
+			reg = <0 0 0 0 0>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_3p3v_sd>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&reg_3p3v_sd>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_3p3v_ssd>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&phy>;
+	phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	phy-supply = <&reg_3p3v>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-0 = <&pinctrl_switch_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio6>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "gigabit_proc";
+					phy-handle = <&switchphy0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+					phy-handle = <&switchphy1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+					phy-handle = <&switchphy3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+					phy-handle = <&switchphy4>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v_main>;
+	disable-over-current;
+	maximum-speed = "full-speed";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v_user_usb>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x4001b000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x40000038
+		>;
+	};
+
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x40000038
+		>;
+	};
+
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f9
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f9
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f9
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x100f9
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x100f9
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x100f9
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x100f9
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x100f9
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x100f9
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x100f9
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x100f9
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x100f9
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x100f9
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x100f9
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x100f9
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x100f9
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x100f9
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x100f9
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x100f9
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x100f9
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x100f9
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x100f9
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x100f9
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x100f9
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x100f9
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x100f9
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x100f9
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x000b1
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b1
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x40010040
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_mdio1: bitbangmdiogrp {
+		fsl,pins = <
+			/* Bitbang MDIO for DEB Switch */
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x4001b030
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40018830
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x10038
+		>;
+	};
+
+	pinctrl_pfuze100_irq: pfuze100grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x40010000
+		>;
+	};
+
+	pinctrl_reg_3p3v_sd: mmcsupply1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x858
+		>;
+	};
+
+	pinctrl_rmii_phy_irq: phygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
+		>;
+	};
+
+	pinctrl_switch_irq: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x4001b000
+		>;
+	};
+
+	pinctrl_tc358767: tc358767grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x10
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x40000038
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x40000038
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_ucs1002_pins: ucs1002grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x10059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10069
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
+
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
new file mode 100644
index 000000000..e67d8dffb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -0,0 +1,1386 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		can0 = &can1;
+		can1 = &can2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		ipu0 = &ipu1;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg;
+		usb1 = &usbh1;
+		usb2 = &usbh2;
+		usb3 = &usbh3;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	clocks {
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ldb: ldb {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+		gpr = <&gpr>;
+		status = "disabled";
+
+		lvds-channel@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds0_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds0_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds0>;
+				};
+			};
+		};
+
+		lvds-channel@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				lvds1_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_lvds1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds1_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_lvds1>;
+				};
+			};
+		};
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		dma_apbh: dma-controller@110000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x00110000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
+		};
+
+		gpmi: nand-controller@112000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+				 <&clks IMX6QDL_CLK_GPMI_APB>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH>,
+				 <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6QDL_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00120000 0x9000>;
+			interrupts = <0 115 0x04>;
+			gpr = <&gpr>;
+			clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+				 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+			clock-names = "iahb", "isfr";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_hdmi>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_hdmi>;
+				};
+			};
+		};
+
+		gpu_3d: gpu@130000 {
+			compatible = "vivante,gc";
+			reg = <0x00130000 0x4000>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
+				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		gpu_2d: gpu@134000 {
+			compatible = "vivante,gc";
+			reg = <0x00134000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		timer@a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+			interrupt-parent = <&intc>;
+			clocks = <&clks IMX6QDL_CLK_TWD>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+			arm,shared-override;
+		};
+
+		pcie: pcie@1ffc000 {
+			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			reg = <0x01ffc000 0x04000>,
+			      <0x01f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+				 <&clks IMX6QDL_CLK_LVDS1_GATE>,
+				 <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			status = "disabled";
+		};
+
+		bus@2000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core",  "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+						 <&clks IMX6QDL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+						 <&clks IMX6QDL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+						 <&clks IMX6QDL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+						 <&clks IMX6QDL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+						 <&clks IMX6QDL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_ESAI_MEM>,
+						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_ESAI_IPG>,
+						 <&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "core", "mem", "extal", "fsys", "spba";
+					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+						 <&clks IMX6QDL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
+						 <&clks IMX6QDL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6q-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
+						 <&clks IMX6QDL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx53-asrc";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+						<&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+						<&clks IMX6QDL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+							"txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+
+				spba@203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu: vpu@2040000 {
+				compatible = "cnm,coda960";
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "bit", "jpeg";
+				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
+					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+				clock-names = "per", "ahb";
+				power-domains = <&pd_pu>;
+				resets = <&src 1>;
+				iram = <&ocram>;
+			};
+
+			aipstz@207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm1: pwm@2080000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: flexcan@2090000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+					 <&clks IMX6QDL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x34 28 0x10 17>;
+				status = "disabled";
+			};
+
+			can2: flexcan@2094000 {
+				compatible = "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+					 <&clks IMX6QDL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x34 29 0x10 18>;
+				status = "disabled";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+					 <&clks IMX6QDL_CLK_GPT_IPG_PER>,
+					 <&clks IMX6QDL_CLK_GPT_3M>;
+				clock-names = "ipg", "per", "osc_per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6q-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-enable-ramp-delay = <380>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6q-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6q-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6QDL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+						         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+						         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+						         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+						         <&clks IMX6QDL_CLK_VPU_AXI>;
+					};
+				};
+			};
+
+			gpr: iomuxc-gpr@20e0000 {
+				compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x20e0000 0x38>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+				};
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
+				reg = <0x20e0000 0x4000>;
+			};
+
+			dcic1: dcic@20e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dcic2: dcic@20e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_IPG>,
+					 <&clks IMX6QDL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		bus@2100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+					 <&clks IMX6QDL_CLK_CAAM_IPG>,
+					 <&clks IMX6QDL_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			aipstz@217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			usbotg: usb@2184000 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh1: usb@2184200 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh2: usb@2184400 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh3: usb@2184600 {
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop2>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 3>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6QDL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@2188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET>,
+					 <&clks IMX6QDL_CLK_ENET_REF>,
+					 <&clks IMX6QDL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp", "enet_out";
+				fsl,stop-mode = <&gpr 0x34 27>;
+				status = "disabled";
+			};
+
+			mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>,
+					 <&clks IMX6QDL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>,
+					 <&clks IMX6QDL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>,
+					 <&clks IMX6QDL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>,
+					 <&clks IMX6QDL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@21ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc0: memory-controller@21b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+			};
+
+			mmdc1: memory-controller@21b4000 { /* MMDC1 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b4000 0x4000>;
+				status = "disabled";
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				compatible = "fsl,imx6q-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6QDL_CLK_IIM>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			tzasc@21d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			tzasc@21d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			mipi_csi: mipi@21dc000 {
+				compatible = "fsl,imx6-mipi-csi2";
+				reg = <0x021dc000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 100 0x04>, <0 101 0x04>;
+				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+					 <&clks IMX6QDL_CLK_VIDEO_27M>,
+					 <&clks IMX6QDL_CLK_EIM_PODF>;
+				clock-names = "dphy", "ref", "pix";
+				status = "disabled";
+			};
+
+			mipi_dsi: mipi@21e0000 {
+				reg = <0x021e0000 0x4000>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mipi_mux_0: endpoint {
+							remote-endpoint = <&ipu1_di0_mipi>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_mux_1: endpoint {
+							remote-endpoint = <&ipu1_di1_mipi>;
+						};
+					};
+				};
+			};
+
+			vdoa@21e4000 {
+				compatible = "fsl,imx6q-vdoa";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_VDOA>;
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+					 <&clks IMX6QDL_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+		ipu1: ipu@2400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,imx6q-ipu";
+			reg = <0x02400000 0x400000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>,
+				 <&clks IMX6QDL_CLK_IPU1_DI1>;
+			clock-names = "bus", "di0", "di1";
+			resets = <&src 2>;
+
+			ipu1_csi0: port@0 {
+				reg = <0>;
+
+				ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+					remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+				};
+			};
+
+			ipu1_csi1: port@1 {
+				reg = <1>;
+			};
+
+			ipu1_di0: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				ipu1_di0_disp0: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di0_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_0>;
+				};
+
+				ipu1_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_0>;
+				};
+
+				ipu1_di0_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_0>;
+				};
+
+				ipu1_di0_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_0>;
+				};
+			};
+
+			ipu1_di1: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				ipu1_di1_disp1: endpoint@0 {
+					reg = <0>;
+				};
+
+				ipu1_di1_hdmi: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&hdmi_mux_1>;
+				};
+
+				ipu1_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_1>;
+				};
+
+				ipu1_di1_lvds0: endpoint@3 {
+					reg = <3>;
+					remote-endpoint = <&lvds0_mux_1>;
+				};
+
+				ipu1_di1_lvds1: endpoint@4 {
+					reg = <4>;
+					remote-endpoint = <&lvds1_mux_1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
new file mode 100644
index 000000000..741d1ed33
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX Board";
+	compatible = "boundary,imx6qp-nitrogen6_max", "fsl,imx6qp";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
new file mode 100644
index 000000000..1593ac86b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Plus Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6qp-nitrogen6_som2", "fsl,imx6qp";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000..f27d7ab42
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
+	compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6qp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 000000000..2bb3bfb18
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
new file mode 100644
index 000000000..480e73183
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
new file mode 100644
index 000000000..bb6ff7c64
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qp.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
new file mode 100644
index 000000000..92b38e669
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8037.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
new file mode 100644
index 000000000..ffc0f2ee1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8037 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
new file mode 100644
index 000000000..07ad70718
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8137.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
new file mode 100644
index 000000000..dd494d587
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8137 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
new file mode 100644
index 000000000..08d8b78a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 QuadPlus Board revD1";
+	compatible = "wand,imx6qp-wandboard", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
new file mode 100644
index 000000000..57de447c4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-zii-rdu2.dtsi"
+
+/ {
+	model = "ZII RDU2+ Board";
+	compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&gpu_3d {
+	assigned-clocks = <&clks IMX6QDL_CLK_GPU3D_SHADER_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD1_594M>;
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
new file mode 100644
index 000000000..4d23c92aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram@940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram@960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		bus@2100000 {
+			pre1: pre@21c8000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c8000 0x1000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE0>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre2: pre@21c9000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021c9000 0x1000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE1>;
+				clock-names = "axi";
+				fsl,iram = <&ocram2>;
+			};
+
+			pre3: pre@21ca000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021ca000 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE2>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			pre4: pre@21cb000 {
+				compatible = "fsl,imx6qp-pre";
+				reg = <0x021cb000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clks IMX6QDL_CLK_PRE3>;
+				clock-names = "axi";
+				fsl,iram = <&ocram3>;
+			};
+
+			prg1: prg@21cc000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cc000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+					 <&clks IMX6QDL_CLK_PRG0_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+			};
+
+			prg2: prg@21cd000 {
+				compatible = "fsl,imx6qp-prg";
+				reg = <0x021cd000 0x1000>;
+				clocks = <&clks IMX6QDL_CLK_PRG1_APB>,
+					 <&clks IMX6QDL_CLK_PRG1_AXI>;
+				clock-names = "ipg", "axi";
+				fsl,pres = <&pre4>, <&pre2>, <&pre3>;
+			};
+		};
+	};
+};
+
+&fec {
+	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpc {
+	compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc";
+};
+
+&ipu1 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg1>;
+};
+
+&ipu2 {
+	compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+	fsl,prg = <&prg2>;
+};
+
+&ldb {
+	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+		 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
+		      "di0", "di1";
+};
+
+&mmdc0 {
+	compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc";
+};
+
+&pcie {
+	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
new file mode 100644
index 000000000..f16c830f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight_display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sl-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_fec_sleep: fecgrp-sleep {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_pwm1: pwmgrp {
+			fsl,pins = <
+				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reglcd3v3grp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/imx6sl-pinfunc.h
new file mode 100644
index 000000000..bcf16060e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-pinfunc.h
@@ -0,0 +1,1073 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6SL_PINFUNC_H
+#define __DTS_IMX6SL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
+#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
+#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
+#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
+#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
+#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
+#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
+#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
+#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
+#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
+#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
+#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
+#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
+#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
+#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
+#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
+#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
+#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
+#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
+#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
+#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
+#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
+#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
+#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
+#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
+#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
+#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
+#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
+#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
+#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
+#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
+#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
+#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
+#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
+#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
+#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
+#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
+#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
+#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
+#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
+#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
+#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
+#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
+#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
+#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
+#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
+#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
+#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
+#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
+#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
+#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
+#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
+#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
+#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
+#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
+#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
+#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
+#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
+#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
+#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
+#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
+#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
+#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
+#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
+#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
+#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
+#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
+#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
+#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
+#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
+#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
+#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
+#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
+#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
+#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
+#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
+#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
+#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
+#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
+#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
+#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
+#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
+#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
+#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
+#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
+#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
+#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
+#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
+#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
+#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
+#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
+#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
+#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
+#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
+#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
+#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
+#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
+#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
+#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
+#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
+#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
+#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
+#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
+#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
+#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
+#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
+#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
+#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
+#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
+#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
+#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
+#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
+#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
+#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
+#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
+#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
+#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
+#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
+#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
+#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
+#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
+#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
+#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
+#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
+#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
+#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
+#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
+#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
+#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
+#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
+#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
+#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
+#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
+#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
+#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
+#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
+#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
+#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
+#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
+#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
+#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
+#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
+#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
+#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
+#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
+#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
+#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
+#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
+#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
+#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
+#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
+#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
+#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
+#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
+#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
+#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
+#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
+#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
+#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
+#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
+#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
+#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
+#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
+#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
+#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
+#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
+#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
+#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
+#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
+#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
+#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
+#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
+#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
+#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
+#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
+#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
+#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
+#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
+#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
+#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
+#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
+#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
+#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
+#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
+#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
+#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
+#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
+#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
+#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
+#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
+#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
+#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
+#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
+#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
+#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
+#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
+#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
+#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
+#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
+#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
+#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
+#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
+#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
+#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
+#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
+#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
+#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
+#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
+#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
+#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
+#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
+#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
+#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
+#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
+#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
+#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
+#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
+#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
+#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
+#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
+#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
+#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
+#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
+#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
+#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
+#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
+#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
+#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
+#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
+#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
+#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
+#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
+#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
+#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
+#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
+#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
+#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
+#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
+#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
+#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
+#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
+#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
+#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
+#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
+#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
+#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
+#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
+#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
+#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
+#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
+#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
+#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
+#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
+#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
+#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
+#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
+#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
+#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
+#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
+#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
+#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
+#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
+#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
+#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
+#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
+#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
+#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
+#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
+#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
+#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
+#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
+#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
+#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
+#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
+#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
+#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
+#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
+#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
+#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
+#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
+#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
+#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
+#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
+#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
+#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
+#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
+#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
+#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
+#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
+#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
+#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
+#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
+#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
+#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
+#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
+#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
+#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
+#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
+#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
+#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
+#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
+#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
+#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
+#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
+#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
+#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
+#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
+#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
+#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
+#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
+#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
+#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
+#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
+#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
+#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
+#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
+#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
+#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
+#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
+#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
+#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
+#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
+#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
+#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
+#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
+#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
+#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
+#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
+#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
+#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
+#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
+#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
+#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
+#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
+#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
+#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
+#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
+#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
+#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
+#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
+#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
+#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
+#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
+#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
+#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
+#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
+#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
+#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
+#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
+#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
+#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
+#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
+#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
+#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
+#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
+#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
+#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
+#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
+#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
+#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
+#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
+#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
+#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
+#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
+#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
+#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
+#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
+#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
+#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
+#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
+#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
+#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
+#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
+#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
+#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
+#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
+#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
+#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
+#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
+#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
+#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
+#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
+#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
+#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
+#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
+#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
+#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
+#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
+#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
+#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
+#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
+#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
+#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
+#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
+#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
+#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
+#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
+#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
+#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
+#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
+#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
+#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
+#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
+#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
+#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
+#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
+#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
+#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
+#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
+#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
+#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
+#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
+#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
+#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
+#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
+#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
+#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
+#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
+#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
+#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
+#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
+#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
+#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
+#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
+#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
+#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
+#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
+#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
+#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
+#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
+#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
+#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
+#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
+#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
new file mode 100644
index 000000000..0fd126db4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Shine 2 HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
+ * Serials start with: E60QF2
+ *
+ * Copyright 2020 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Shine 2 HD";
+	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		on {
+			label = "tolinoshine2hd:white:on";
+			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	/* TODO: embedded controller at 0x43 (driver missing) */
+
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	zforce: touchscreen@50 {
+		compatible = "neonode,zforce";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_zforce>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&ldo1_reg>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		x-size = <1072>;
+		y-size = <1448>;
+	};
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x17059
+			MX6SL_PAD_KEY_ROW0__GPIO3_IO25  0x17059
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+			MX6SL_PAD_KEY_ROW6__GPIO4_IO05		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+
+	pinctrl_zforce: zforcegrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06		0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT5__GPIO5_IO09		0x10059 /* TP_RST */
+		>;
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
+	 * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
new file mode 100644
index 000000000..27143ea0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Shine 3 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Toline Shine 3 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Tolino Shine 3";
+	compatible = "kobo,tolino-shine3", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+			MX6SL_PAD_KEY_ROW6__GPIO4_IO05		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15                  0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11        0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28                         0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
new file mode 100644
index 000000000..408da704c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "WaRP Board";
+	compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
+			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
+			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
+			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6sl-warp {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+			>;
+		};
+
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
new file mode 100644
index 000000000..0e0139246
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -0,0 +1,1010 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+					<&clks IMX6SL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	clocks {
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SL_CLK_OCRAM>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI1>,
+						 <&clks IMX6SL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI2>,
+						 <&clks IMX6SL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI3>,
+						 <&clks IMX6SL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI4>,
+						 <&clks IMX6SL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart5: serial@2018000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+						 <&clks IMX6SL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+						 <&clks IMX6SL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+						 <&clks IMX6SL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart4: serial@2038000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02038000 0x4000>;
+					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@2084000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@2088000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@208c000 {
+				#pwm-cells = <3>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PERCLK>,
+					 <&clks IMX6SL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_GPT>,
+					 <&clks IMX6SL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sl-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2850000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
+							 <&clks IMX6SL_CLK_LCDIF_PIX>,
+							 <&clks IMX6SL_CLK_EPDC_AXI>,
+							 <&clks IMX6SL_CLK_EPDC_PIX>,
+							 <&clks IMX6SL_CLK_PXP_AXI>;
+					};
+				};
+			};
+
+			gpr: iomuxc-gpr@20e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sl-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			csi: csi@20e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spdc: spdc@20e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_SDMA>,
+					 <&clks IMX6SL_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@20f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@20f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			lcdif: lcdif@20f8000 {
+				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SL_CLK_LCDIF_AXI>,
+					 <&clks IMX6SL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+				power-domains = <&pd_disp>;
+			};
+
+			dcp: crypto@20fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@2184400 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				phy_type = "hsic";
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@2188000 {
+				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_ENET>,
+					 <&clks IMX6SL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>;
+			};
+
+			rngb: rngb@21b4000 {
+				compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				compatible = "fsl,imx6sl-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		gpu_2d: gpu@2200000 {
+			compatible = "vivante,gc";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
new file mode 100644
index 000000000..32b3d82fe
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+		regulator-name = "SD3_WIFI";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		audio-cpu = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux3: audmux3grp {
+		fsl,pins = <
+			MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
+			MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
+			MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
+			MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
+			MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+		>;
+	};
+
+	pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: vbus1grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus: vbus2grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+		>;
+	};
+
+	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x17061
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x13061
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x17061
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x17061
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x17061
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x17061
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170a1
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170a1
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170a1
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170a1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170e9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170e9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170e9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170e9
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
+			MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+			MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+			MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+			MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+			MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+			MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+			MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+			MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+			MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+			MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+			MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+			MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+			MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+			MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+			MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+			MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+			MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+			MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+			MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+			MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+			MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+			MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+			MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+			MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+			MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+			MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pmw1grp {
+		fsl,pins = <
+			MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp	{
+		fsl,pins = <
+			MX6SLL_PAD_WDOG_B__WDOG1_B   0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
new file mode 100644
index 000000000..7214d1c98
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Clara HD ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Kobo Clara HD";
+	compatible = "kobo,clarahd", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SLL_PAD_SD1_DATA4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__GPIO2_IO20	0x79
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA02__GPIO2_IO22	0x79
+			MX6SLL_PAD_LCD_DATA03__GPIO2_IO23	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x79
+			MX6SLL_PAD_KEY_ROW6__GPIO4_IO05		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10	0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SLL_PAD_SD2_DATA0__GPIO5_IO01	0x100f9
+			MX6SLL_PAD_SD2_DATA1__GPIO4_IO30	0x100f9
+			MX6SLL_PAD_SD2_DATA2__GPIO5_IO03	0x100f9
+			MX6SLL_PAD_SD2_DATA3__GPIO4_IO28	0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059		/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059		/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h
new file mode 100644
index 000000000..713a346f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-pinfunc.h
@@ -0,0 +1,880 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
new file mode 100644
index 000000000..3659fd5ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points =
+				/* kHz    uV */
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz      SOC-PU uV */
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@2018000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 50 32>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+					      <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+					      <&iomuxc 21 6 11>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+					      <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+					      <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+					      <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+					      <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+					      <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+					      <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+					      <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+					      <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+					      <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+					      <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+					      <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+					      <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+					      <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+					      <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+					      <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+					      <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+					      <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+					      <&iomuxc 21 137 1>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPIO6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_3p0: regulator-3p0@20c8120 {
+					compatible = "fsl,anatop-regulator";
+					reg = <0x20c8120>;
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				tempmon: temperature-sensor {
+					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usb-phy@20c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usb-phy@20ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: interrupt-controller@20dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@20e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_IPG>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@20f0000 {
+				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+				reg = <0x20f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
+			lcdif: lcd-controller@20f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: crypto@20fc000 {
+				compatible = "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: memory-controller@21b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
+			};
+
+			rngb: rng@21b4000 {
+				compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+					     "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
new file mode 100644
index 000000000..a2c79bcf9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
+	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_3p3v>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: regulator-can1-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlan>;
+		compatible = "regulator-fixed";
+		clocks = <&clks IMX6SX_CLK_CKO>;
+		clock-names = "slow";
+		regulator-name = "wlan-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+		gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6sx-nitrogen6sx-sgtl5000";
+		cpu-dai = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+			read-only;
+		};
+
+		partition@c2000 {
+			label = "Kernel";
+			reg = <0xc2000 0x11e000>;
+		};
+
+		partition@1e0000 {
+			label = "M4";
+			reg = <0x1e0000 0x20000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@4 {
+			reg = <4>;
+		};
+
+		ethphy2: ethernet-phy@5 {
+			reg = <5>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+	phy-supply = <&reg_3p3v>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6SX_CLK_CKO2>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		VDDD-supply = <&reg_1p8v>;
+		assigned-clocks = <&clks IMX6SX_CLK_CKO2_SEL>,
+				  <&clks IMX6SX_CLK_CKO2>;
+		assigned-clock-parents = <&clks IMX6SX_CLK_OSC>;
+		assigned-clock-rates = <0>, <24000000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	disable-over-current;
+	reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	cap-sdio-irq;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD	0x1b0b0
+			MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC	0x1b0b0
+			MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS	0x1b0b0
+			MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__ECSPI1_MISO		0x100b1
+			MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI		0x100b1
+			MX6SX_PAD_KEY_COL0__ECSPI1_SCLK		0x100b1
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x0b0b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0x1b0b0
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0x1b0b0
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0x30b1
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0xb0b0
+			MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4	0xb0b0
+			MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5	0xb0b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x30b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x30b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0x30b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0x30b1
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0x30b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x30b1
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0xb0b0
+			MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8	0xb0b0
+			MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0xb0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24	0x0b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1	0x1b0b0
+			MX6SX_PAD_NAND_CLE__GPIO4_IO_3		0x1b0b0
+			MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x1b0b0
+			MX6SX_PAD_NAND_WE_B__GPIO4_IO_14	0x1b0b0
+			MX6SX_PAD_NAND_WP_B__GPIO4_IO_15	0x1b0b0
+			MX6SX_PAD_NAND_READY_B__GPIO4_IO_13	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18	0x1b0b0
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x1b0b0
+			MX6SX_PAD_SD1_CMD__CCM_CLKO1		0x000b0
+			MX6SX_PAD_SD3_DATA5__GPIO7_IO_7		0x1b0b0
+			/* Test points */
+			MX6SX_PAD_NAND_DATA04__GPIO4_IO_8	0x1b0b0
+			MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
+			MX6SX_PAD_NAND_DATA06__GPIO4_IO_10	0xb0b0
+			MX6SX_PAD_NAND_DATA07__GPIO4_IO_11	0xb0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_reg_wlan: reg-wlangrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_DATA4__GPIO7_IO_6		0x1b0b0
+			MX6SX_PAD_GPIO1_IO11__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO12__CCM_CLKO2		0x000b0
+			MX6SX_PAD_ENET1_COL__GPIO2_IO_0		0x1b0b0
+			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22	0xb0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX		0x1b0b1
+			MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX		0x1b0b1
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX		0x1b0b1
+			MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS		0x1b0b1
+			MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x1b0b0
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x170b1
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1-vbusgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26	0xb0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_KEY_COL2__GPIO2_IO_12		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10071
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17071
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17071
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17071
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17071
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10071
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17071
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17071
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17071
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17071
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17071
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17071
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17071
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17071
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17071
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17071
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
new file mode 100644
index 000000000..f4dc46207
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -0,0 +1,1668 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX                        0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX                        0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX                        0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX                        0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX                        0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX                        0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS                       0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS                       0x002C 0x0374 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX                        0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX                        0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS                       0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS                       0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS                       0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS                       0x0034 0x037C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS                       0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS                       0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX                        0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX                        0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX                        0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX                        0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS                       0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS                       0x0064 0x03AC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS                       0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS                       0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS                        0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS                        0x006C 0x03B4 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX                          0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX                          0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX                        0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX                        0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS                        0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS                        0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX                         0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX                         0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX                         0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX                         0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS                     0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS                     0x009C 0x03E4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS                     0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS                     0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS                         0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS                         0x00A4 0x03EC 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX                          0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX                          0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS                         0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS                         0x00AC 0x03F4 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX                          0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX                          0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS                         0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS                         0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX                          0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX                          0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS                         0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS                         0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX                          0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX                          0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS                      0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS                      0x0160 0x04A8 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS                      0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS                      0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX                       0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX                       0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX                       0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX                       0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS                     0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS                     0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS                     0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS                     0x01A4 0x04EC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX                       0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX                       0x01B4 0x04FC 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX                      0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX                      0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX                         0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX                         0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX                         0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX                         0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS                        0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS                        0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS                        0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS                        0x0234 0x057C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX                         0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX                         0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX                         0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX                         0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX                         0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX                         0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX                         0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX                         0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS                          0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS                          0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX                           0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX                           0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS                        0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS                        0x0260 0x05A8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX                         0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX                         0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX                         0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX                         0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX                         0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX                         0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS                        0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS                        0x0270 0x05B8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS                        0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS                        0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX                         0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX                         0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX                         0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX                         0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS                        0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS                        0x0298 0x05E0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS                        0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS                        0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
+
+/* these are not supposed to be used any more and remove them after some time */
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX		MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX		MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX		MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX		MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX		MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX		MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B	MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX		MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX		MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B	MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B	MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B	MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS
+#define MX6SX_PAD_CSI_DATA04__UART6_RX		MX6SX_PAD_CSI_DATA04__UART6_DCE_RX
+#define MX6SX_PAD_CSI_DATA04__UART6_TX		MX6SX_PAD_CSI_DATA04__UART6_DTE_TX
+#define MX6SX_PAD_CSI_DATA05__UART6_RX		MX6SX_PAD_CSI_DATA05__UART6_DTE_RX
+#define MX6SX_PAD_CSI_DATA05__UART6_TX		MX6SX_PAD_CSI_DATA05__UART6_DCE_TX
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B	MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B	MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B	MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS
+#define MX6SX_PAD_CSI_MCLK__UART4_RX		MX6SX_PAD_CSI_MCLK__UART4_DCE_RX
+#define MX6SX_PAD_CSI_MCLK__UART4_TX		MX6SX_PAD_CSI_MCLK__UART4_DTE_TX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX		MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX		MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B	MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS
+#define MX6SX_PAD_ENET2_COL__UART1_RX		MX6SX_PAD_ENET2_COL__UART1_DCE_RX
+#define MX6SX_PAD_ENET2_COL__UART1_TX		MX6SX_PAD_ENET2_COL__UART1_DTE_TX
+#define MX6SX_PAD_ENET2_CRS__UART1_RX		MX6SX_PAD_ENET2_CRS__UART1_DTE_RX
+#define MX6SX_PAD_ENET2_CRS__UART1_TX		MX6SX_PAD_ENET2_CRS__UART1_DCE_TX
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B	MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B	MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B		MX6SX_PAD_KEY_COL0__UART6_DCE_RTS
+#define MX6SX_PAD_KEY_COL1__UART6_RX		MX6SX_PAD_KEY_COL1__UART6_DTE_RX
+#define MX6SX_PAD_KEY_COL1__UART6_TX		MX6SX_PAD_KEY_COL1__UART6_DCE_TX
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B		MX6SX_PAD_KEY_COL2__UART5_DCE_RTS
+#define MX6SX_PAD_KEY_COL3__UART5_RX		MX6SX_PAD_KEY_COL3__UART5_DTE_RX
+#define MX6SX_PAD_KEY_COL3__UART5_TX		MX6SX_PAD_KEY_COL3__UART5_DCE_TX
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B		MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS
+#define MX6SX_PAD_KEY_ROW1__UART6_RX		MX6SX_PAD_KEY_ROW1__UART6_DCE_RX
+#define MX6SX_PAD_KEY_ROW1__UART6_TX		MX6SX_PAD_KEY_ROW1__UART6_DTE_TX
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B		MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS
+#define MX6SX_PAD_KEY_ROW3__UART5_RX		MX6SX_PAD_KEY_ROW3__UART5_DCE_RX
+#define MX6SX_PAD_KEY_ROW3__UART5_TX		MX6SX_PAD_KEY_ROW3__UART5_DTE_TX
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B	MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B	MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS
+#define MX6SX_PAD_NAND_DATA06__UART3_RX		MX6SX_PAD_NAND_DATA06__UART3_DCE_RX
+#define MX6SX_PAD_NAND_DATA06__UART3_TX		MX6SX_PAD_NAND_DATA06__UART3_DTE_TX
+#define MX6SX_PAD_NAND_DATA07__UART3_RX		MX6SX_PAD_NAND_DATA07__UART3_DTE_RX
+#define MX6SX_PAD_NAND_DATA07__UART3_TX		MX6SX_PAD_NAND_DATA07__UART3_DCE_TX
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B	MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B	MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX		MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX		MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX	MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX
+#define MX6SX_PAD_SD1_DATA0__UART2_RX		MX6SX_PAD_SD1_DATA0__UART2_DCE_RX
+#define MX6SX_PAD_SD1_DATA0__UART2_TX		MX6SX_PAD_SD1_DATA0__UART2_DTE_TX
+#define MX6SX_PAD_SD1_DATA1__UART2_RX		MX6SX_PAD_SD1_DATA1__UART2_DTE_RX
+#define MX6SX_PAD_SD1_DATA1__UART2_TX		MX6SX_PAD_SD1_DATA1__UART2_DCE_TX
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B	MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B	MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS
+#define MX6SX_PAD_SD2_DATA0__UART4_RX		MX6SX_PAD_SD2_DATA0__UART4_DCE_RX
+#define MX6SX_PAD_SD2_DATA0__UART4_TX		MX6SX_PAD_SD2_DATA0__UART4_DTE_TX
+#define MX6SX_PAD_SD2_DATA1__UART4_RX		MX6SX_PAD_SD2_DATA1__UART4_DTE_RX
+#define MX6SX_PAD_SD2_DATA1__UART4_TX		MX6SX_PAD_SD2_DATA1__UART4_DCE_TX
+#define MX6SX_PAD_SD2_DATA2__UART6_RX		MX6SX_PAD_SD2_DATA2__UART6_DCE_RX
+#define MX6SX_PAD_SD2_DATA2__UART6_TX		MX6SX_PAD_SD2_DATA2__UART6_DTE_TX
+#define MX6SX_PAD_SD2_DATA3__UART6_RX		MX6SX_PAD_SD2_DATA3__UART6_DTE_RX
+#define MX6SX_PAD_SD2_DATA3__UART6_TX		MX6SX_PAD_SD2_DATA3__UART6_DCE_TX
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B		MX6SX_PAD_SD3_CLK__UART4_DCE_CTS
+#define MX6SX_PAD_SD3_CMD__UART4_RX		MX6SX_PAD_SD3_CMD__UART4_DTE_RX
+#define MX6SX_PAD_SD3_CMD__UART4_TX		MX6SX_PAD_SD3_CMD__UART4_DCE_TX
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B	MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS
+#define MX6SX_PAD_SD3_DATA3__UART4_RX		MX6SX_PAD_SD3_DATA3__UART4_DCE_RX
+#define MX6SX_PAD_SD3_DATA3__UART4_TX		MX6SX_PAD_SD3_DATA3__UART4_DTE_TX
+#define MX6SX_PAD_SD3_DATA4__UART3_RX		MX6SX_PAD_SD3_DATA4__UART3_DCE_RX
+#define MX6SX_PAD_SD3_DATA4__UART3_TX		MX6SX_PAD_SD3_DATA4__UART3_DTE_TX
+#define MX6SX_PAD_SD3_DATA5__UART3_RX		MX6SX_PAD_SD3_DATA5__UART3_DTE_RX
+#define MX6SX_PAD_SD3_DATA5__UART3_TX		MX6SX_PAD_SD3_DATA5__UART3_DCE_TX
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B	MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B	MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS
+#define MX6SX_PAD_SD4_DATA4__UART5_RX		MX6SX_PAD_SD4_DATA4__UART5_DCE_RX
+#define MX6SX_PAD_SD4_DATA4__UART5_TX		MX6SX_PAD_SD4_DATA4__UART5_DTE_TX
+#define MX6SX_PAD_SD4_DATA5__UART5_RX		MX6SX_PAD_SD4_DATA5__UART5_DTE_RX
+#define MX6SX_PAD_SD4_DATA5__UART5_TX		MX6SX_PAD_SD4_DATA5__UART5_DCE_TX
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B	MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B	MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
new file mode 100644
index 000000000..83ee97252
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX Sabre Auto Board";
+	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_wake: regulator-can-wake {
+		compatible = "regulator-fixed";
+		regulator-name = "can-wake";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_wake>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	reg_cs42888: cs42888_supply {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			     "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&cs42888>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+};
+
+&anaclk2 {
+	clock-frequency = <24576000>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+			  <&clks IMX6SX_PLL4_BYPASS>,
+			  <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+				 <&clks IMX6SX_PLL4_BYPASS_SRC>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+			<&clks IMX6SX_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_egalax_int: egalax-intgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22      0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO        0xa0b1
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC          0xa0b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC   0xa0b9
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0   0xa0b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1   0xa0b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2   0xa0b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3   0xa0b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN    0xa0b1
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK      0x3081
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0   0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1   0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2   0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3   0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN    0x3081
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC   0xa0b9
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0   0xa0b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1   0xa0b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2   0xa0b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3   0xa0b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN    0xa0b1
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK      0x3081
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0   0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1   0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2   0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3   0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN    0x3081
+		>;
+	};
+
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA01__ESAI_TX_FS    0x1b030
+			MX6SX_PAD_CSI_HSYNC__ESAI_TX0       0x1b030
+			MX6SX_PAD_CSI_DATA04__ESAI_TX1      0x1b030
+			MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3  0x1b030
+			MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2  0x1b030
+			MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA03__ESAI_RX_FS    0x1b030
+			MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0   0x1b030
+			MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1  0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO03__I2C2_SDA          0x4001b8b1
+			MX6SX_PAD_GPIO1_IO02__I2C2_SCL          0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA            0x4001b8b1
+			MX6SX_PAD_KEY_COL4__I2C3_SCL            0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x17059
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__SPDIF_IN           0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+			MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_vcc_sd3: vccsd3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY	0x30b0
+		>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	cs42888: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&anaclk2 0>;
+		clock-names = "mclk";
+		VA-supply = <&reg_cs42888>;
+		VD-supply = <&reg_cs42888>;
+		VLS-supply = <&reg_cs42888>;
+		VLC-supply = <&reg_cs42888>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	max7310_a: gpio@30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio@32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
new file mode 100644
index 000000000..a4ab2d3e9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+/ {
+
+	sound {
+		status = "disabled";
+	};
+
+	sound-mqs {
+		compatible = "fsl,imx6sx-sdb-mqs",
+			     "fsl,imx-audio-mqs";
+		model = "mqs-audio";
+		audio-cpu = <&sai1>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&mqs>;
+	};
+};
+
+&usdhc2 {
+	/* pin conflict with mqs*/
+	status = "disabled";
+};
+
+&mqs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
new file mode 100644
index 000000000..7dda42553
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevA Board";
+	compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+
+	flash1: flash@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&reg_can_en {
+	/* Transceiver EN/STBY is active high on RevA board */
+	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
+&reg_can_stby {
+	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+	vin-supply = <&reg_can_en>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
new file mode 100644
index 000000000..1c4eacd68
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-sai.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+
+/ {
+	sound {
+		audio-cpu = <&sai1>;
+	};
+};
+
+&audmux {
+	/* pin conflict with sai */
+	status = "disabled";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
+
+&ssi2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
new file mode 100644
index 000000000..1b808563a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB RevB Board";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+
+	flash1: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <2>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen6_reg>;
+};
+
+&reg_can_stby {
+	/* Transceiver EN/STBY is active low on RevB board */
+	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
new file mode 100644
index 000000000..1351d7f70
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_pcie_gpio: regulator-pcie-gpio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx6sx-sdb-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
+			>;
+		};
+
+		pinctrl_enet_3v3: enet3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+			>;
+		};
+
+		pinctrl_mqs: mqsgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+			>;
+		};
+
+		pinctrl_peri_3v3: peri3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_qspi2: qspi2grp {
+			fsl,pins = <
+				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
new file mode 100644
index 000000000..554791687
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Softing VIN|ING 2000";
+	compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		red {
+			label = "red";
+			max-brightness = <255>;
+			pwms = <&pwm6 0 50000>;
+		};
+
+		green {
+			label = "green";
+			max-brightness = <255>;
+			pwms = <&pwm2 0 50000>;
+		};
+
+		blue {
+			label = "blue";
+			max-brightness = <255>;
+			pwms = <&pwm1 0 50000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_peri_3v3>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * This board has a shared rail of reg_arm and reg_soc (supplied by
+	 * sw1a_reg) which is modeled below, but still this module behaves
+	 * unstable without higher voltages. Hence, set higher voltages here.
+	 */
+	operating-points = <
+		/* kHz    uV */
+		996000  1250000
+		792000  1175000
+		396000  1175000
+		198000  1175000
+		>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC uV */
+		996000	1250000
+		792000	1175000
+		396000	1175000
+		198000  1175000
+	>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet0-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-supply = <&reg_peri_3v3>;
+	phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <5>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet1-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	proximity: sx9500@28 {
+		compatible = "semtech,sx9500";
+		reg = <0x28>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx9500>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze200";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CLK__ECSPI4_SCLK		0x130b1
+			MX6SX_PAD_SD3_DATA3__ECSPI4_MISO	0x130b1
+			MX6SX_PAD_SD3_CMD__ECSPI4_MOSI		0x130b1
+			MX6SX_PAD_SD3_DATA2__GPIO7_IO_4		0x30b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x30c1
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x30c1
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0f9
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0f9
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x30c1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0f9
+			MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0f9
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW2__GPIO2_IO_17		0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x1b0b0
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x1b0b0
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x1b0b0
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0x1b0b0
+			MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4000a038
+			/* LAN8720 PHY Reset */
+			MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21	0x10b0
+			/* MDIO */
+			MX6SX_PAD_ENET1_COL__ENET2_MDC		0xa0f9
+			MX6SX_PAD_ENET1_CRS__ENET2_MDIO		0xa0f9
+			/* IRQ from PHY */
+			MX6SX_PAD_KEY_ROW4__GPIO2_IO_19		0x10b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b0b0
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b0b0
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			/* reset external uC */
+			MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19	0x10b0
+			/* IRQ from external uC */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x10b0
+			/* overcurrent detection */
+			MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8	0x10b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_ALE__I2C3_SDA		0x4001b8b1
+			MX6SX_PAD_NAND_CLE__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_DATA02__GPIO4_IO_6	0x10b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp-1 {
+		fsl,pins = <
+			/* blue LED */
+			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp-1 {
+		fsl,pins = <
+			/* green LED */
+			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp-1 {
+		fsl,pins = <
+			/* red LED */
+			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sx9500: sx9500grp {
+		fsl,pins = <
+			/* Reset */
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x838
+			/* IRQ */
+			MX6SX_PAD_KEY_ROW1__GPIO2_IO_16		0x70e0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28	0x1b000
+			MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26	0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170b9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170b9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170b9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x170f9
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x170f9
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x170f9
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x17059
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x17059
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x17059
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x17059
+			MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170b9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170b9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170b9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170b9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170b9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170b9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170b9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x170f9
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x170f9
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x170f9
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x170f9
+			MX6SX_PAD_SD4_DATA4__USDHC4_DATA4	0x170f9
+			MX6SX_PAD_SD4_DATA5__USDHC4_DATA5	0x170f9
+			MX6SX_PAD_SD4_DATA6__USDHC4_DATA6	0x170f9
+			MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm6 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1a_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc4 {
+	/* hs200-mode is currently unsupported because Vccq is on 3.1V, but
+	 * not on necessary 1.8V.
+	 */
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 000000000..205ea2648
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Basic";
+	compatible = "udoo,neobasic", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 000000000..5817b4985
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Extended";
+	compatible = "udoo,neoextended", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
new file mode 100644
index 000000000..96f4d8984
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+	model = "UDOO Neo Full";
+	compatible = "udoo,neofull", "fsl,imx6sx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&fec1 {
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
new file mode 100644
index 000000000..ee6456550
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+	compatible = "fsl,imx6sx";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "udoo-neo:red:mmc";
+			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		orange {
+			label = "udoo-neo:orange:user";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	reg_sdio_pwr: regulator-sdio-pwr {
+		compatible = "regulator-fixed";
+		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "SDIO_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg1_reg>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg2_reg>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 { /* Brick snap in sensors connector */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c4 { /* Onboard Motion sensors */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
+			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
+			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
+			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
+
+			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
+			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
+			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
+			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
+			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
+			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
+
+			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO03__I2C2_SDA		0x4001b8b1>,
+			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
+			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
+	};
+
+	pinctrl_otg1_reg: otg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+	};
+
+
+	pinctrl_otg2_reg: otg2grp {
+		fsl,pins =
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins =
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+	};
+
+	pinctrl_usb_otg2: usbot2ggrp {
+		fsl,pins =
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
+			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
+			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
+			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
+			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
+			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
+			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_COL2__GPIO2_IO_12	0x15059>,
+			<MX6SX_PAD_KEY_ROW1__GPIO2_IO_16	0x13059>,
+			<MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17069>,
+			<MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17069>,
+			<MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17069>,
+			<MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17069>,
+			<MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17069>,
+			<MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10069>,
+			<MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT	0x10059>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&uart3 { /* Bluetooth - only on Extended/Full versions */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		max-speed = <921600>;
+	};
+};
+
+/* Arduino serial */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 { /* J2 micro USB port */
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	status = "okay";
+};
+
+&usbotg2 { /* J3 host USB port */
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_sdio_pwr>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 { /* Wi-Fi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	cap-power-off-card;
+	wakeup-source;
+	keep-power-in-suspend;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
new file mode 100644
index 000000000..08332f70a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -0,0 +1,1432 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		spi4 = &ecspi5;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC uV */
+				996000      1175000
+				792000      1175000
+				396000      1175000
+				198000	    1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6SX_CLK_ARM>,
+				 <&clks IMX6SX_CLK_PLL2_PFD2>,
+				 <&clks IMX6SX_CLK_STEP>,
+				 <&clks IMX6SX_CLK_PLL1_SW>,
+				 <&clks IMX6SX_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	anaclk1: clock-anaclk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk1";
+	};
+
+	anaclk2: clock-anaclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "anaclk2";
+	};
+
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram_s: sram@8f8000 {
+			compatible = "mmio-sram";
+			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
+		};
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX6SX_CLK_OCRAM>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
+		L2: cache-controller@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&pd_pu>;
+		};
+
+		dma_apbh: dma-controller@1804000 {
+			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+		};
+
+		gpmi: nand-controller@1806000{
+			compatible = "fsl,imx6sx-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+				 <&clks IMX6SX_CLK_GPMI_APB>,
+				 <&clks IMX6SX_CLK_GPMI_BCH>,
+				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6SX_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SX_CLK_OSC>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks 0>, <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_IPG>,
+						 <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI1>,
+						 <&clks IMX6SX_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI2>,
+						 <&clks IMX6SX_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI3>,
+						 <&clks IMX6SX_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI4>,
+						 <&clks IMX6SX_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sx-uart",
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_UART_IPG>,
+						 <&clks IMX6SX_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@2024000 {
+					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_ESAI_MEM>,
+						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
+						 <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "mem", "extal",
+						      "fsys", "spba";
+					dmas = <&sdma 23 21 0>,
+					       <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+						 <&clks IMX6SX_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+						 <&clks IMX6SX_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+						 <&clks IMX6SX_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+					       <&sdma 19 23 1>, <&sdma 20 23 1>,
+					       <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM1>,
+					 <&clks IMX6SX_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM2>,
+					 <&clks IMX6SX_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM3>,
+					 <&clks IMX6SX_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM4>,
+					 <&clks IMX6SX_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			flexcan1: can@2090000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				status = "disabled";
+			};
+
+			flexcan2: can@2094000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				status = "disabled";
+			};
+
+			gpt: timer@2098000 {
+				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+					 <&clks IMX6SX_CLK_GPT_3M>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
+			};
+
+			gpio7: gpio@20b4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sx-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_vdd1p1: regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_vdd2p5: regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pcie: regulator-vddpcie {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpcie";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_soc>;
+						clocks = <&clks IMX6SX_CLK_GPU>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+							 <&clks IMX6SX_CLK_DISPLAY_AXI>,
+							 <&clks IMX6SX_CLK_LCDIF1_PIX>,
+							 <&clks IMX6SX_CLK_LCDIF_APB>,
+							 <&clks IMX6SX_CLK_LCDIF2_PIX>,
+							 <&clks IMX6SX_CLK_CSI>,
+							 <&clks IMX6SX_CLK_VADC>;
+					};
+
+					pd_pci: power-domain@3 {
+						reg = <3>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pcie>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sx-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>,
+					 <&clks IMX6SX_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sx reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2100000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2100000 0x10000>;
+				ranges = <0 0x2100000 0x10000>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SX_CLK_CAAM_MEM>,
+					 <&clks IMX6SX_CLK_CAAM_ACLK>,
+					 <&clks IMX6SX_CLK_CAAM_IPG>,
+					 <&clks IMX6SX_CLK_EIM_SLOW>;
+				clock-names = "mem", "aclk", "ipg", "emi_slow";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@2184400 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc 2>;
+				phy_type = "hsic";
+				fsl,anatop = <&anatop>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET_REF>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+			mlb: mlb@218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_MLB>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: mmc@219c000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>;
+			};
+
+			fec2: ethernet@21b4000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x021b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,stop-mode = <&gpr 0x10 4>;
+				status = "disabled";
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sx-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			sai1: sai@21d4000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021d4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+					 <&clks IMX6SX_CLK_SAI1>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 31 24 0>, <&sdma 32 24 0>;
+				status = "disabled";
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			sai2: sai@21dc000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021dc000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+					 <&clks IMX6SX_CLK_SAI2>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 33 24 0>, <&sdma 34 24 0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI1>,
+					 <&clks IMX6SX_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			qspi2: spi@21e4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI2>,
+					 <&clks IMX6SX_CLK_QSPI2>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			spba-bus@2240000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02240000 0x40000>;
+				ranges;
+
+				csi1: csi@2214000 {
+					reg = <0x02214000 0x4000>;
+					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC1>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				pxp: pxp@2218000 {
+					compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp";
+					reg = <0x02218000 0x4000>;
+					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_PXP_AXI>;
+					clock-names = "axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				csi2: csi@221c000 {
+					reg = <0x0221c000 0x4000>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC2>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				lcdif1: lcdif@2220000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02220000 0x4000>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				lcdif2: lcdif@2224000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+					reg = <0x02224000 0x4000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>;
+					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+
+				vadc: vadc@2228000 {
+					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+					reg-names = "vadc-vafe", "vadc-vdec";
+					clocks = <&clks IMX6SX_CLK_VADC>,
+						 <&clks IMX6SX_CLK_CSI>;
+					clock-names = "vadc", "csi";
+					power-domains = <&pd_disp>;
+					status = "disabled";
+				};
+			};
+
+			adc1: adc@2280000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			adc2: adc@2284000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@2288000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				status = "disabled";
+			};
+
+			ecspi5: spi@228c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+				reg = <0x0228c000 0x4000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ECSPI5>,
+					 <&clks IMX6SX_CLK_ECSPI5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@22a0000 {
+				compatible = "fsl,imx6sx-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x022a0000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			pwm5: pwm@22a4000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a4000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM5>,
+					 <&clks IMX6SX_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm6: pwm@22a8000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a8000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM6>,
+					 <&clks IMX6SX_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm7: pwm@22ac000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022ac000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM7>,
+					 <&clks IMX6SX_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+
+			pwm8: pwm@22b0000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0022b0000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM8>,
+					 <&clks IMX6SX_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+			};
+		};
+
+		pcie: pcie@8ffc000 {
+			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
+				 <&clks IMX6SX_CLK_LVDS1_OUT>,
+				 <&clks IMX6SX_CLK_PCIE_REF_125M>,
+				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
+			power-domains = <&pd_disp>, <&pd_pci>;
+			power-domain-names = "pcie", "pcie_phy";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 000000000..2438669f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
new file mode 100644
index 000000000..71d3c7e05
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "VPERI_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		/*
+		 * If you want to want to make this dynamic please
+		 * check schematics and test all affected peripherals:
+		 *
+		 * - sensors
+		 * - ethernet phy
+		 * - can
+		 * - bluetooth
+		 * - wm8960 audio codec
+		 * - ov5640 camera
+		 */
+		regulator-always-on;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "mx6ul-wm8960";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight_display>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_peri_3v3>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_peri_3v3>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		vdd-supply = <&reg_peri_3v3>;
+		vddio-supply = <&reg_peri_3v3>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_peri_3v3: peri3v3grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
new file mode 100644
index 000000000..3792679c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Express board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Express.";
+	compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
+		     "fsl,imx6ul";
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	broken-cd;      /* no carrier detect line (use polling) */
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
+		>;
+	};
+
+	pinctrl_ecspi3_master: ecspi3grp1 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_ecspi3_slave: ecspi3grp2 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10071
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	/* General purpose pinctrl */
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIOs BANK 3 */
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0xf030
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
new file mode 100644
index 000000000..a0bbec57d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Pro.";
+	compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "auo,g101evn010";
+		power-supply = <&ldo4_ext>;
+		backlight = <&lcd_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&ext_3v3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <26>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <1>;
+		};
+	};
+};
+
+&gpio5 {
+	emmc-usd-mux {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_goodix_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat0_17
+		     &pinctrl_lcdif_clken
+		     &pinctrl_lcdif_hvsync>;
+	lcd-supply = <&ldo4_ext>;       /* BU90T82 LVDS bridge power */
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&ldo4_ext {
+	regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-1 = <&pinctrl_sai2_sleep>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-rates = <0>, <786432000>, <12288000>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_4wires>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2wires>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	broken-cd;	/* no carrier detect line (use polling) */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
+		>;
+	};
+
+	pinctrl_ecspi1_master: ecspi1grp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x10b0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x40017051
+		>;
+	};
+
+	pinctrl_enet2_mdio: mdioenet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+		>;
+	};
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+		>;
+	};
+
+	pinctrl_goodix_touch: goodixgrp{
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
+		>;
+	};
+
+	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_lcdif_clken: lcdifctrlgrp1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+		>;
+	};
+
+	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT          0x110b0
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x10b0
+		>;
+	};
+
+	pinctrl_sai2_sleep: sai2grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x3000
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x3000
+			/* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x3000
+		>;
+	};
+
+	pinctrl_uart2_4wires: uart2grp-4wires {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_2wires: uart3grp-2wires {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10039
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			/* Mux selector between eMMC/SD# */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x79
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x17059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
new file mode 100644
index 000000000..b5781c365
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore 6UL System-On-Module device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&vdda_adc_3v3>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			int_3v3: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm_soc_in: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <925000>;
+				};
+			};
+
+			ext_3v3: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr3: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1300000>;
+				};
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vdd_snvs_3v3: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_adc_3v3: vldo1 {
+				compatible = "regulator-fixed";
+				regulator-name = "vref-adc-3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo2_ext: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdda_wlan: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_high_in: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_int: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_ext: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcoin_chg: vcoin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* UART1 (Bluetooth) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+	non-removable;
+	no-1-8-v;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS    0x1b0b1
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS    0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x17051
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
+			MX6UL_PAD_SD1_DATA0__GPIO2_IO18         0x3000
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19         0x3000
+			MX6UL_PAD_SD1_DATA2__GPIO2_IO20         0x3000
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21         0x3000
+		>;
+	};
+
+	pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x08a0
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x08a0
+		>;
+	};
+
+	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
+		>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
new file mode 100644
index 000000000..a0097da03
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL Starter Kit";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm8 0 100000>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <100>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ul-geam-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_OSC>;
+		clock-names = "mclk";
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&tsc {
+	measure-delay-time = <0x1ffff>;
+	pre-charge-time = <0x1fff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
new file mode 100644
index 000000000..f2386dcb9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-reset-duration = <1>;
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
+};
+
+/* Bluetooth */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+/* WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			/* INT# */
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
+			/* RST# */
+			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
+			/* BT_REG_ON */
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
+			/* WL_REG_ON */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
+			/* WL_IRQ */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
new file mode 100644
index 000000000..935a77d71
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_5v>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led {
+			label = "User";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_w1>;
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel: panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg1_vbus: regulator-usbotg1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg1vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg2_vbus: regulator-usbotg2vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg2vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xffff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	vbus-supply = <&reg_usbotg1_vbus>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbotg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
+			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
+			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
+			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
+			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
+			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
+			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
new file mode 100644
index 000000000..1df3e376a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL eMMC Starter kit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
new file mode 100644
index 000000000..8c26d4d1a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot-nand.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-isiot.dtsi"
+
+/ {
+	model = "Engicam Is.IoT MX6UL NAND Starter kit";
+	compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
new file mode 100644
index 000000000..14fc4828b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm8 0 100000>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <100>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ul-isiot-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_OSC>;
+		clock-names = "mclk";
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+
+	stmpe811: gpio-expander@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		stmpe: touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x4001b031
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp  {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK      0x17070
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD      0x10070
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3  0x17070
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4  0x17070
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5  0x17070
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6  0x17070
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7  0x17070
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B   0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
new file mode 100644
index 000000000..5bfad4655
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+	model = "Kontron N6310 S 43";
+	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
+		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
new file mode 100644
index 000000000..5a3e06d62
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-n6310-som.dtsi"
+#include "imx6ul-kontron-n6x1x-s.dtsi"
+
+/ {
+	model = "Kontron N6310 S";
+	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
+		     "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
new file mode 100644
index 000000000..acd936540
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+
+/ {
+	model = "Kontron N6310 SOM";
+	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x08000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
new file mode 100644
index 000000000..239a1af3a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-n6311-som.dtsi"
+#include "imx6ul-kontron-n6x1x-s.dtsi"
+
+/ {
+	model = "Kontron N6311 S";
+	compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som",
+		     "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
new file mode 100644
index 000000000..29ed38dce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+
+/ {
+	model = "Kontron N6311 SOM";
+	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+};
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x18000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
new file mode 100644
index 000000000..770f59b23
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	num-channels = <3>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	rs485-rts-active-low;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1 {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
new file mode 100644
index 000000000..09a83dbdf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts
new file mode 100644
index 000000000..1d863a16b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-liteboard.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-litesom.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteBoard";
+	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
+		     "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
+		>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi
new file mode 100644
index 000000000..8d6893210
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2016 Grinn
+ *
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Grinn i.MX6UL liteSOM";
+	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
new file mode 100644
index 000000000..6ce84f92b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
+
+#include "imx6ul.dtsi"
+#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
new file mode 100644
index 000000000..375b98d72
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2017 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6ul-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
+
+/ {
+	model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
+	compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
+
+	pinctrl_tamper_gpios: tampergpiosgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_w1: w1grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..88f631c8f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	gpio_leds_som: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+		compatible = "gpio-leds";
+
+		phycore-green {
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			status = "disabled";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		reg = <0x52>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2cgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 000000000..699dfcbf9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000..2f3fd32a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+
+	pinctrl_user_leds: user_ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x79
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
new file mode 100644
index 000000000..f1513e676
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
+	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_sound_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		status = "disabled";
+	};
+
+	reg_sound_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+
+	reg_can1_en: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&princtrl_flexcan1_en>;
+		regulator-name = "Can";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&tlv320>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_adc1_vref_3v3>;
+	/*
+	 * driver can not separate a specific channel so we request 4 channels
+	 * here - we need only the fourth channel
+	 */
+	num-channels = <4>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_en>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	tlv320: codec@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+		status = "disabled";
+	};
+
+	stmpe: touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		status = "disabled";
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+			touchscreen-inverted-x = <1>;
+			touchscreen-inverted-y = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "disabled";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			<&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "disabled";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1 {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
new file mode 100644
index 000000000..5a74c7f68
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and DWARF baseboard";
+	compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
new file mode 100644
index 000000000..09f7ffa9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
+	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x10b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts
new file mode 100644
index 000000000..6cd7d5877
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX6UL and PI baseboard";
+	compatible = "technexion,imx6ul-pico-pi", "fsl,imx6ul";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6ul-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
new file mode 100644
index 000000000..357ffb2f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 6 0>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+	phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			max-speed = <100>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			/* VDD_ARM_SOC_IN*/
+			sw1b_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* DRAM */
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DRAM */
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET2_MDC	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x800
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x79
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO03__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__I2C3_SCL	0x4001b8b0
+			MX6UL_PAD_UART1_RX_DATA__I2C3_SDA	0x4001b8b0
+			>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			/* LCD reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b0
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b0
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b0
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x10b0
+			>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B	0x03029
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
new file mode 100644
index 000000000..380d2db13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-pinfunc.h
@@ -0,0 +1,959 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2014 - 2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6UL_PINFUNC_H
+#define __DTS_IMX6UL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
+
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
+
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0610 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x05f0 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0614 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT			0x0054 0x02e0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M		0x0058 0x02e4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0610 6 1
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT		0x0068 0x02f4 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M		0x006c 0x02f8 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0560 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x04d4 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x04d0 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x04ec 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x04f0 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x04f4 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x04f8 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0550 8 1
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x04fc 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0500 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0504 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x05d0 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0508 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x05c4 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT		0x00cc 0x0358 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x050c 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x05d4 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M		0x00d0 0x035c 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0510 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x05c8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0514 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x05d8 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0518 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x05cc 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x051c 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0520 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M		0x00f0 0x037c 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0570 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0600 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0604 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0		0x0118 0x03a4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x05e0 8 1
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1		0x011c 0x03a8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2		0x0120 0x03ac 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3		0x0124 0x03b0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x05e4 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4		0x0128 0x03b4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5		0x012c 0x03b8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6		0x0130 0x03bc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7		0x0134 0x03c0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8		0x0138 0x03c4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0504 3 1
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0600 1 1
+#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9		0x013c 0x03c8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0508 3 1
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10		0x0140 0x03cc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x050c 3 1
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11		0x0144 0x03d0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0510 3 1
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12		0x0148 0x03d4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0514 3 1
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13		0x014c 0x03d8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0518 3 1
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0604 1 1
+#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14		0x0150 0x03dc 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x051c 3 1
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15		0x0154 0x03e0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0520 3 1
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK	0x0158 0x03e4 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x04d4 3 1
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL	0x015c 0x03e8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x04d0 3 1
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x04ec 3 1
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x04f0 3 1
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x04f4 3 1
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0540 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x04f8 3 1
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x04fc 3 1
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0500 3 1
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x05d0 3 1
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x05c4 3 1
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x05d4 3 1
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x05c8 3 1
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x05d8 3 1
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x05cc 3 1
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0570 3 1
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0560 3 1
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0614 6 1
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0610 6 2
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x05f0 2 1
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0550 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x05e0 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0540 3 1
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x05e4 6 1
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
+
+#endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
new file mode 100644
index 000000000..8c2f3df79
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		/delete-property/ mmc1;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
new file mode 100644
index 000000000..d82698e7d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0011 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
new file mode 100644
index 000000000..97686097a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		lcdif-24bit-pins-a = &pinctrl_disp0_3;
+		mmc0 = &usdhc1;
+		/delete-property/ mmc1;
+		serial2 = &uart3;
+		serial4 = &uart5;
+	};
+	/delete-node/ sound;
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c_gpio {
+	status = "disabled";
+};
+
+&i2c2 {
+	/delete-node/ codec@a;
+	/delete-node/ touchscreen@48;
+
+	rtc: mcp7940x@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+&reg_usbotg_vbus{
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	/delete-property/ cd-gpios;
+	cap-sdio-irq;
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/ uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+	hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
+		>;
+	};
+
+	pinctrl_disp0_3: disp0grp-3 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			/* LCD_DATA08..09 not wired */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			/* LCD_DATA16..17 not wired */
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
new file mode 100644
index 000000000..938a32ced
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -0,0 +1,971 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		display = &display;
+		i2c0 = &i2c2;
+		i2c1 = &i2c_gpio;
+		i2c2 = &i2c1;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		lcdif-23bit-pins-a = &pinctrl_disp0_1;
+		lcdif-24bit-pins-a = &pinctrl_disp0_2;
+		pwm0 = &pwm5;
+		reg-can-xcvr = &reg_can_xcvr;
+		serial2 = &uart5;
+		serial4 = &uart3;
+		spi0 = &ecspi2;
+		spi1 = &spi_gpio;
+		stk5led = &user_led;
+		usbh1 = &usbotg2;
+		usbotg = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		mclk: mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_rst>;
+		enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio>;
+		gpios = <
+			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
+			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
+		>;
+		clock-frequency = <400000>;
+		status = "okay";
+
+		ds1339: rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3_etn: regulator-3v3etn {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_ETN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_etnphy_power>;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-canxcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lcd_pwr: regulator-lcdpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_pwr>;
+		gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi_gpio: spi-gpio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi_gpio>;
+		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+		cs-gpios = <
+			&gpio1 29 GPIO_ACTIVE_HIGH
+			&gpio1 10 GPIO_ACTIVE_HIGH
+		>;
+		status = "disabled";
+
+		spi@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <660000>;
+		};
+
+		spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <660000>;
+		};
+	};
+
+	sound {
+		compatible = "karo,imx6ul-tx6ul-sgtl5000",
+			     "simple-audio-card";
+		simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <
+		&gpio1 29 GPIO_ACTIVE_HIGH
+		&gpio1 10 GPIO_ACTIVE_HIGH
+	>;
+	status = "disabled";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <60000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <60000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: touchscreen@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_NONE>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0..3 are mapped to KPP row/col 4..7 */
+	linux,keymap = <
+		MATRIX_KEY(4, 4, KEY_POWER)
+		MATRIX_KEY(4, 5, KEY_KP0)
+		MATRIX_KEY(4, 6, KEY_KP1)
+		MATRIX_KEY(4, 7, KEY_KP2)
+		MATRIX_KEY(5, 4, KEY_KP3)
+		MATRIX_KEY(5, 5, KEY_KP4)
+		MATRIX_KEY(5, 6, KEY_KP5)
+		MATRIX_KEY(5, 7, KEY_KP6)
+		MATRIX_KEY(6, 4, KEY_KP7)
+		MATRIX_KEY(6, 5, KEY_KP8)
+		MATRIX_KEY(6, 6, KEY_KP9)
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_disp0_1>;
+	lcd-supply = <&reg_lcd_pwr>;
+	display = <&display>;
+	status = "okay";
+
+	display: disp0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		status = "okay";
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbotg_vbus>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
+		>;
+	};
+
+	pinctrl_disp0_1: disp0grp-1 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			/* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_2: disp0grp-2 {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x10
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x10
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x10
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x10
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x10
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x10
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0 /* Interrupt */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0 /* Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Wake */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x000b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x000b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x000b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x000b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x000b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x000b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400000b1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x000b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x000b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x000b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x000b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x000b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x000b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x400000b1
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_etnphy_power: etnphy-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0 /* ETN PHY POWER */
+		>;
+	};
+
+	pinctrl_etnphy0_int: etnphy-intgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_etnphy1_int: etnphy-intgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
+		>;
+	};
+
+	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x0b0b0 /* Flexcan XCVR enable */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c_gpio: i2c-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x4001b8b1 /* I2C SCL */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x4001b8b1 /* I2C SDA */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b1
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__KPP_COL06	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__KPP_COL07	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__KPP_ROW05	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07	0x1b0b0
+		>;
+	};
+
+	pinctrl_lcd_pwr: lcd-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0 /* LCD Power Enable */
+		>;
+	};
+
+	pinctrl_lcd_rst: lcd-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04	0x0b0b0 /* LCD Reset */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT		0x0b0b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x0b0b0 /* SSI1_RXD */
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x0b0b0 /* SSI1_TXD */
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x0b0b0 /* SSI1_CLK */
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x0b0b0 /* SSI1_FS */
+		>;
+	};
+
+	pinctrl_spi_gpio: spi-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x0b0b0 /* CSPI_SS */
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x0b0b0 /* CSPI_MOSI */
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x0b0b0 /* CSPI_MISO */
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x0b0b0 /* CSPI_SCLK */
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x1b0b0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart1_rtscts: uart1-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart2_rtscts: uart2-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x0b0b0
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX	0x0b0b0
+			MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart5_rtscts: uart5-rtsctsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x0b0b0
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbh1_oc: usbh1-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x17059 /* USBH1_OC */
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x0b0b0 /* USBH1_VBUSEN */
+		>;
+	};
+
+	pinctrl_usbotg_oc: usbotg-ocgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x17059 /* USBOTG_OC */
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x1b0b0 /* USBOTG_VBUSEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x070b1
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x07099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x070b1
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x070b1
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x070b1
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x070b1
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cdgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x170b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x070b1
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x070b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x070b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x070b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x070b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x070b1
+			/* eMMC RESET */
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
new file mode 100644
index 000000000..c374fe2a6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -0,0 +1,1114 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <696000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			operating-points =
+				/* kHz	uV */
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
+				/* KHz	uV */
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		status = "disabled";
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a02000 0x2000>,
+			      <0x00a04000 0x2000>,
+			      <0x00a06000 0x2000>;
+		};
+
+		dma_apbh: dma-controller@1804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: nand-controller@1806000 {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: spi@2008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart7: serial@2018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@2024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@2028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@2030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
+					reg = <0x2034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
+						<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
+			};
+
+			tsc: tsc@2040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			can1: flexcan@2090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				status = "disabled";
+			};
+
+			can2: flexcan@2094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				status = "disabled";
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+			};
+
+			fec2: ethernet@20b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 4>;
+				status = "disabled";
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-mfd";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+				};
+			};
+
+			usbphy1: usbphy@20c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@20ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx6ul-snvs-lpgpr";
+				};
+			};
+
+			epit1: epit@20d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@20d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@20dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: timer@20e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pwm5: pwm@20f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@20f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@20f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@20fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			crypto: crypto@2140000 {
+				compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x2140000 0x3c000>;
+				ranges = <0 0x2140000 0x3c000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAAM_IPG>, <&clks IMX6UL_CLK_CAAM_ACLK>,
+					 <&clks IMX6UL_CLK_CAAM_MEM>;
+				clock-names = "ipg", "aclk", "mem";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@2188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			adc1: adc@2198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			memory-controller@21b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
+			};
+
+			weim: weim@21b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_EIM>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: efuse@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6ul-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6UL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
+			};
+
+			csi: csi@21c4000 {
+				compatible = "fsl,imx6ul-csi";
+				reg = <0x021c4000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CSI>;
+				clock-names = "mclk";
+				status = "disabled";
+			};
+
+			lcdif: lcdif@21c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			pxp: pxp@21cc000 {
+				compatible = "fsl,imx6ul-pxp";
+				reg = <0x021cc000 0x4000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
+			qspi: spi@21e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			wdog3: watchdog@21e4000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x021e4000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG3>;
+				status = "disabled";
+			};
+
+			uart2: serial@21e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@21ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@21f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@21f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@21fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
new file mode 100644
index 000000000..74aaa8a56
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	assigned-clock-rates = <320000000>;
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
new file mode 100644
index 000000000..08669a183
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..a78849fd2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 Toradex AG
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	pwms = <&pwm4 0 5000000 1>;
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	wakeup-source;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_sd1_vmmc>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
new file mode 100644
index 000000000..95a11b8bc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Toradex AG
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
new file mode 100644
index 000000000..df72ce1ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Toradex AG
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
new file mode 100644
index 000000000..9f1e38282
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Toradex AG
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
+
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <25000000>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
new file mode 100644
index 000000000..548cfcc7a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Toradex AG
+ */
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &fec2;
+		ethernet1 = &fec1;
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-gpio";
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+		regulator-always-on;
+		regulator-name = "+V3.3_1.8_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1 3300000 0x0>;
+		vin-supply = <&reg_module_3v3>;
+	};
+};
+
+&adc1 {
+	num-channels = <10>;
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SPI */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+};
+
+&fec2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet2>;
+	pinctrl-1 = <&pinctrl_enet2_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ad7879@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+};
+
+&sdma {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dte-mode;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+};
+
+&usbotg2 {
+	dr_mode = "host";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_can_int: canint-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_enet2: enet2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet2_sleep: enet2sleepgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio-bl-on-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2-grp { /* Camera */
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3-grp { /* CAN2 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
+		>;
+	};
+
+	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7-grp { /* CAN1 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
+		>;
+	};
+
+	pinctrl_pwm6: pwm6-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_pwm7: pwm7-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
+		>;
+	};
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
+		>;
+	};
+
+	pinctrl_usbh_reg: gpio-usbh-reg {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
+
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_snvs_gpio1: snvs-gpio1-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
+		>;
+	};
+
+	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
+	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
+		>;
+	};
+
+	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
+		>;
+	};
+
+	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
+		>;
+	};
+
+	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
+		>;
+	};
+
+	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
+		>;
+	};
+
+	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
new file mode 100644
index 000000000..57588a5e1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-n6411-som.dtsi"
+#include "imx6ul-kontron-n6x1x-s.dtsi"
+
+/ {
+	model = "Kontron N6411 S";
+	compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
new file mode 100644
index 000000000..d000606c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-n6x1x-som-common.dtsi"
+
+/ {
+	model = "Kontron N6411 SOM";
+	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+};
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x18000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
new file mode 100644
index 000000000..79cc45728
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-myir-mys-6ulx.dtsi"
+
+/ {
+	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
+	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
+};
+
+&gpmi {
+	fsl,use-minimum-ecc;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
new file mode 100644
index 000000000..d03694fea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "MYiR MYS-6ULX Single Board Computer";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vdd_5v>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vdd_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_vdd_3v3>;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
new file mode 100644
index 000000000..155f941f2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+#include "imx6ull.dtsi"
+#include "imx6ul-imx6ull-opos6ul.dtsi"
diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/imx6ull-opos6uldev.dts
new file mode 100644
index 000000000..198fdb726
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-opos6uldev.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2019 Armadeus Systems <support@armadeus.com>
+
+/dts-v1/;
+#include "imx6ull-opos6ul.dtsi"
+#include "imx6ul-imx6ull-opos6uldev.dtsi"
+
+/ {
+	model = "Armadeus Systems OPOS6UL SoM (i.MX6ULL) on OPOS6ULDev board";
+	compatible = "armadeus,imx6ull-opos6uldev", "armadeus,imx6ull-opos6ul", "fsl,imx6ull";
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tamper_gpios>;
+
+	pinctrl_tamper_gpios: tampergpiosgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg2_vbus: usbotg2vbusgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_w1: w1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 000000000..56cd16e5a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 000000000..9648d4eca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 000000000..656baf846
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
new file mode 100644
index 000000000..e168494e0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000..ff08d95a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+	/delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
new file mode 100644
index 000000000..c1595fc78
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ flexcan1engrp;
+	/delete-node/ rtcintgrp;
+	/delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
new file mode 100644
index 000000000..54cfe7229
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2017 NXP
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H
+#define __DTS_IMX6ULL_PINFUNC_SNVS_H
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10                          0x0000 0x0044 0x0000 0x5 0x0
+#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11                          0x0004 0x0048 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00                        0x0008 0x004C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01                        0x000C 0x0050 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02                        0x0010 0x0054 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03                        0x0014 0x0058 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04                        0x0018 0x005C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05                        0x001C 0x0060 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06                        0x0020 0x0064 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07                        0x0024 0x0068 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08                        0x0028 0x006C 0x0000 0x5 0x0
+#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09                        0x002C 0x0070 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
new file mode 100644
index 000000000..7328d4ef8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX6ULL_PINFUNC_H
+#define __DTS_IMX6ULL_PINFUNC_H
+
+#include "imx6ul-pinfunc.h"
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                    0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                    0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX                    0x0084 0x0310 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX                    0x0084 0x0310 0x0644 0x9 0x4
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX                    0x0088 0x0314 0x0644 0x9 0x5
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX                    0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS                     0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS                     0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS                     0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS                     0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01                  0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02                  0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03                  0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04                    0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05                    0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06                       0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07                    0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08                    0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09                       0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED                       0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ                        0x00E0 0x036C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08                    0x00E4 0x0370 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09                    0x00E8 0x0374 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10                       0x00EC 0x0378 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11                    0x00F0 0x037C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12                    0x00F4 0x0380 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13                       0x00F8 0x0384 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14                      0x00FC 0x0388 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15                       0x0100 0x038C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK                            0x0104 0x0390 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE                          0x0108 0x0394 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE                           0x010C 0x0398 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0                          0x0110 0x039C 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE                           0x0114 0x03A0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00                        0x0118 0x03A4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01                        0x011C 0x03A8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02                        0x0120 0x03AC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03                        0x0124 0x03B0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04                        0x0128 0x03B4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05                        0x012C 0x03B8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06                        0x0130 0x03BC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07                        0x0134 0x03C0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR                         0x0150 0x03DC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL                          0x0154 0x03E0 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK                         0x0158 0x03E4 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP                          0x015C 0x03E8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1                         0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02                        0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03                        0x0174 0x0400 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2                         0x01D4 0x0460 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3                       0x01D8 0x0464 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1                        0x01DC 0x0468 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1                            0x01E0 0x046C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK                     0x01E4 0x0470 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK                     0x01E8 0x0474 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS                         0x01EC 0x0478 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK                        0x01F0 0x047C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
new file mode 100644
index 000000000..9bf67490a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+#include "imx6ul.dtsi"
+#include "imx6ull-pinfunc.h"
+#include "imx6ull-pinfunc-snvs.h"
+
+/* Delete UART8 in AIPS-1 (i.MX6UL specific) */
+/delete-node/ &uart8;
+/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
+/delete-node/ &crypto;
+
+&cpu0 {
+	clock-frequency = <900000000>;
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1250000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&ocotp {
+	compatible = "fsl,imx6ull-ocotp", "syscon";
+};
+
+&pxp {
+	compatible = "fsl,imx6ull-pxp";
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
+};
+
+/ {
+	soc {
+		aips3: bus@2200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			dcp: crypto@2280000 {
+				compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
+				clock-names = "dcp";
+			};
+
+			rngb: rng@2284000 {
+				compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_DUMMY>;
+			};
+
+			iomuxc_snvs: iomuxc-snvs@2290000 {
+				compatible = "fsl,imx6ull-iomuxc-snvs";
+				reg = <0x02290000 0x4000>;
+			};
+
+			uart8: serial@2288000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+					 <&clks IMX6UL_CLK_UART8_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 000000000..483d9732c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+	/delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 000000000..0b5f1a763
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ i2c2;
+		/delete-property/ i2c3;
+		/delete-property/ serial4;
+		/delete-property/ serial5;
+		/delete-property/ serial6;
+		/delete-property/ serial7;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+	};
+};
+
+/delete-node/ &adc1;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
new file mode 100644
index 000000000..139188eb9
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * ADC2 is not available on the Aster board and
+ * conflicts with AD7879 resistive touchscreen.
+ */
+&adc2 {
+	status = "disabled";
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Microchip/Atmel maxtouch controller */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiotouch>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpiotouch: touchgpios {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	no-1-8-v;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..3caf45073
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* fixed crystal dedicated to mpc258x */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&adc2 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+		status = "okay";
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/*
+	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
+	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
+	 */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiotouch>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpiotouch: touchgpios {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
new file mode 100644
index 000000000..f1c60b0cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -0,0 +1,941 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+/ {
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm1 0 5000000 0>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_DCDC3>;
+};
+
+&adc2 {
+	vref-supply = <&reg_DCDC3>;
+};
+
+&cpu0 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+};
+
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_LDO1>;
+	fsl,magic-packet;
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_135",
+			  "SODIMM_22",
+			  "",
+			  "",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "SODIMM_59",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "",
+			  "",
+			  "SODIMM_188",
+			  "SODIMM_178";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_105",
+			  "SODIMM_152",
+			  "SODIMM_150",
+			  "SODIMM_95",
+			  "SODIMM_126",
+			  "SODIMM_107",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "SODIMM_127",
+			  "SODIMM_130",
+			  "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_133",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_128";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_93",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_35",
+			  "SODIMM_33",
+			  "SODIMM_38",
+			  "SODIMM_36",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_131",
+			  "SODIMM_129",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_67",
+			  "SODIMM_59",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53",
+			  "",
+			  "",
+			  "SODIMM_98",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_100",
+			  "SODIMM_102";
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "",
+			  "SODIMM_99",
+			  "",
+			  "",
+			  "SODIMM_137";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&reg_DCDC3>;
+	};
+
+	ad7879@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	pmic@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC2: DCDC2 { /* V1.1_ARM */
+				regulator-min-microvolt = <975000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC3: DCDC3 { /* V1.8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			reg_LDO2: LDO2 { /* +V1.8_SD */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO4: LDO4 { /* V1.8_LPSR */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_1p0d {
+	vin-supply = <&reg_DCDC3>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&reg_LDO2>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&reg_DCDC3>;
+	non-removable;
+	sdhci-caps-mask = <0x80000000 0x0>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
+		     &pinctrl_gpio7 &pinctrl_usbc_det>;
+
+	pinctrl_gpio1: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+		>;
+	};
+
+	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_can_int: can-int-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_enet1_sleep: enet1sleepgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
+			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
+			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
+			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
+			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3-cs-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio-bl-on {
+		fsl,pins = <
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+		>;
+	};
+
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdif-dat-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm3: pwm3-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
+		>;
+	};
+
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+		>;
+	};
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+		>;
+	};
+
+	pinctrl_usbc_det: gpio-usbc-det {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+		>;
+	};
+
+	pinctrl_usbh_reg: gpio-usbh-vbus {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+	pinctrl_gpio_lpsr: gpio1-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
+		>;
+	};
+
+	pinctrl_cd_usdhc1: usdhc1-cd-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
+		>;
+	};
+
+	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
new file mode 100644
index 000000000..887497e3b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ *
+ * Note: This file does not include nodes for all peripheral devices.
+ * As device driver coverage increases additional nodes can be added.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			/* #SWITCH_A */
+			label = "S11";
+			linux,code = <KEY_1>;
+			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button-1 {
+			/* #SWITCH_B */
+			label = "S12";
+			linux,code = <KEY_2>;
+			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			/* #SWITCH_C */
+			label = "S13";
+			linux,code = <KEY_3>;
+			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_fec1_pwdn: regulator-fec1-pwdn {
+		compatible = "regulator-fixed";
+		regulator-name = "PWDN_FEC1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_fec2_pwdn: regulator-fec2-pwdn {
+		compatible = "regulator-fixed";
+		regulator-name = "PWDN_FEC2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mba_12v0: regulator-mba-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC12V0_MBA7";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_transmitter: regulator-lvds-transmitter {
+		compatible = "regulator-fixed";
+		regulator-name = "#SHTDN_LVDS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_REF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&sw2_reg>;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	num-chipselects = <3>;
+	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
+		   <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-chipselects = <1>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-delay = <1>;
+	phy-supply = <&reg_fec1_pwdn>;
+	phy-handle = <&ethphy1_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			/* LED1: Link/Activity, LED2: Error */
+			ti,led-function = <0x0db0>;
+			/* Active low, LED1 and LED2 driven by phy */
+			ti,led-ctrl = <0x1001>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_audio_3v3>;
+		iov-supply = <&reg_audio_3v3>;
+	};
+
+	pca9555: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9555>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
+			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
+			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
+			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
+			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
+			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
+			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
+		>;
+	};
+
+	pinctrl_hog_mba7_1: hogmba71grp {
+		fsl,pins = <
+			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
+			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
+			/* #BOOT_EN */
+			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
+		>;
+	};
+
+
+	pinctrl_pca9555: pca95550grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
+			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
+			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
+			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
+			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
+			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
+			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
+			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
+			/* Limitation: RTS is not connected */
+			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
+		fsl,pins = <
+			/* WP */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
+			/* CD */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
+			/* VSELECT */
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* LCD_CONTRAST */
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh {
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
new file mode 100644
index 000000000..8773344b5
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 512 MB - default configuration */
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic1>;
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: temperature-sensor-eeprom@1e {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1e>;
+		status = "okay";
+	};
+
+	/* ST M24C64 */
+	m24c64: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		status = "okay";
+	};
+
+	at24c02: eeprom@56 {
+		compatible = "atmel,24c02";
+		reg = <0x56>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
+			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
+		>;
+	};
+
+	pinctrl_pmic1: pmic1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
+			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
+			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
+		>;
+	};
+};
+
+&sdma {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vgen4_reg>;
+	vqmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/*
+	 * Errata e10574:
+	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
+	 * TQMa7 on X1-22 (RESET_IN#).
+	 */
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 000000000..713483c39
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,294 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-iMX7";
+	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+	};
+
+	reg_usb_otg1_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x30
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x30
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x11
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x11
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x11
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x11
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x11
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x11
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x11
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x11
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x11
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x11
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x11
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x11
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x11
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x11
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x11
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x11
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x11
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x11
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x11
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x11
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14 /* OTG PWREN */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
new file mode 100644
index 000000000..f3f0537d5
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 000000000..20480276c
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000..8ee73c870
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 Toradex AG
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
+		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
new file mode 100644
index 000000000..045e4413d
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 Toradex AG
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "SODIMM_157",
+			  "",
+			  "SODIMM_163",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
new file mode 100644
index 000000000..87b132bcd
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
new file mode 100644
index 000000000..219a0404a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
new file mode 100644
index 000000000..221274c73
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ Systems TQMa7D board on MBa7 carrier board";
+	compatible = "tq,imx7d-mba7", "fsl,imx7d";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-reset-delay = <1>;
+	phy-supply = <&reg_fec2_pwdn>;
+	phy-handle = <&ethphy2_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy2_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			/* LED1: Link/Activity, LED2: error */
+			ti,led-function = <0x0db0>;
+			/* active low, LED1/2 driven by phy */
+			ti,led-ctrl = <0x1001>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
+			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* #pcie_wake */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
+			/* #pcie_rst */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
+			/* #pcie_dis */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* 1.5V logically from 3.3V */
+	/* probe deferral not supported */
+	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+	power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
new file mode 100644
index 000000000..dd8003bd1
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "96Boards Meerkat96 Board";
+	compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	reg_wlreg_on: regulator-wlreg-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led5 {
+			label = "yellow:wlan";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "blue:bt";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	keep-power-in-suspend;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v;
+	broken-cd;
+	status = "okay";
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	vqmmc-supply =<&reg_3p3v>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_irq>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x59
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x1f
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x59
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA	0x4000007f
+			MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_DATA4__UART3_DCE_RX	0x79
+			MX7D_PAD_SD3_DATA5__UART3_DCE_TX	0x79
+			MX7D_PAD_SD3_DATA6__UART3_DCE_RTS	0x79
+			MX7D_PAD_SD3_DATA7__UART3_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__UART6_DCE_RX		0x79
+			MX7D_PAD_SD1_WP__UART6_DCE_TX		0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX	0x79
+			MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0D
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+		>;
+	};
+
+	pinctrl_wlan_irq: wlanirqgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x19
+		>;
+	};
+
+	pinctrl_wlreg_on: wlregongrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x19
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
new file mode 100644
index 000000000..a31de9001
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX7 Nitrogen7 Board";
+	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight-j9 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_j9>;
+		gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	backlight_lcd: backlight-j20 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "reg_wlan";
+		startup-delay-us = <70000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touch@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
+		interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vgen3_reg>;
+	bus-width = <4>;
+	fsl,tuning-step = <2>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x7d
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x71
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x11
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x11
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x11
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x71
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x11
+			MX7D_PAD_SD3_STROBE__GPIO6_IO10			0x75
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x7d
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x7d
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x7d
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2_rv4162: i2c2-rv4162grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x7d
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x79
+			MX7D_PAD_SD2_WP__GPIO5_IO10		0x7d
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_j2: j2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15	0x7d
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x7d
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x7d
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x7d
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7d
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x7d
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x7d
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x7d
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x7d
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x7d
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x7d
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x7d
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x7d
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x7d
+			MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14	0x7d
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x7d
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x7d
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x7d
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x7d
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x7d
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x7d
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x7d
+			MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22	0x7d
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x7d
+			MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20	0x7d
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x7d
+			MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19	0x7d
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x7d
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x7d
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x7d
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x7d
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x7d
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x7d
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x7d
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x7d
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x7d
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x7d
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x7d
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x75
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x75
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x59
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_2>;
+
+	pinctrl_hog_2: hoggrp-2 {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
+	pinctrl_backlight_j9: backlightj9grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x7d
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x7d
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x75
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
new file mode 100644
index 000000000..fdc10563f
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7D and DWARF baseboard";
+	compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9554: io-expander@25 {
+		compatible = "nxp,pca9554";
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x25>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
new file mode 100644
index 000000000..6ad39dca7
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board using Hobbit baseboard";
+	compatible = "technexion,imx7d-pico-hobbit", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&ecspi3 {
+	ads7846@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		interrupt-parent = <&gpio2>;
+		interrupts = <7 0>;
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3p3v>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <4095>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4095>;
+		ti,pressure-max = /bits/ 16 <1024>;
+		ti,x-plate-ohms = /bits/ 16 <90>;
+		ti,y-plate-ohms = /bits/ 16 <90>;
+		ti,debounce-max = /bits/ 16 <70>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <2>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts
new file mode 100644
index 000000000..5afb1674e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2015 Technexion Ltd.
+//
+// Author: Wig Cheng  <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+/dts-v1/;
+
+#include "imx7d-pico.dtsi"
+/ {
+	model = "TechNexion PICO-IMX7 and NYMPH baseboard";
+	compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx7d-sgtl5000";
+		audio-cpu = <&sai1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&sys_mclk>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
new file mode 100644
index 000000000..f263e391e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+#include "imx7d-pico.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX7D Board and PI baseboard";
+	compatible = "technexion,imx7d-pico-pi", "fsl,imx7d";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_vref_1v8>;
+	};
+};
+
+&i2c4 {
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
new file mode 100644
index 000000000..e519897fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2017 NXP
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+        };
+
+	reg_wlreg_on: regulator-wlreg_on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlreg_on>;
+		regulator-name = "wlreg_on";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			status = "okay";
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 { /* Backlight */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 { /* Bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	fsl,tuning-step = <2>;
+	vmmc-supply = <&reg_3p3v>;
+	wakeup-source;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 { /* Wifi SDIO */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wlreg_on>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__I2C1_SDA	0x4000007f
+			MX7D_PAD_UART1_RX_DATA__I2C1_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_TX_DATA__I2C2_SDA	0x4000007f
+			MX7D_PAD_UART2_RX_DATA__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+		>;
+	};
+
+	pinctrl_can1: can1frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
+			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
+		>;
+	};
+
+	pinctrl_can2: can2frp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
+			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
+		>;
+	};
+
+	pinctrl_pwm1: pwm1 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+		>;
+	};
+
+	pinctrl_pwm2: pwm2 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+		>;
+	};
+
+	pinctrl_pwm3: pwm3 {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp{
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
+		>;
+	};
+
+	pinctrl_reg_wlreg_on: regregongrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x79
+			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x79
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x79
+			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x79
+			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x79
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX	0x79
+			MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX	0x79
+			MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS	0x79
+			MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg_pwr {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x15
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
+	pinctrl_reg_lcdreg_on: reglcdongrp {
+	fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
new file mode 100644
index 000000000..69f2c1ec8
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -0,0 +1,1154 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_IMX7D_PINFUNC_H
+#define __DTS_IMX7D_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0                       0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT                        0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1                       0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT                        0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3               0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__SAI1_MCLK                       0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__ANATOP_24M_OUT                  0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO01__OBSERVE0_OUT                    0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2                       0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__PWM2_OUT                        0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_ENET_REF_CLK1               0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO02__SAI2_MCLK                       0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__CCM_CLKO1                       0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__OBSERVE1_OUT                    0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO02__USB_OTG1_ID                     0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3                       0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__PWM3_OUT                        0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_ENET_REF_CLK2               0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK                       0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2                       0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__OBSERVE2_OUT                    0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO03__USB_OTG2_ID                     0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4                       0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC                     0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__FLEXTIMER1_CH4                  0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DCE_CTS                   0x0010 0x0040 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO04__UART5_DTE_RTS                   0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL                        0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO04__OBSERVE3_OUT                    0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5                       0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR                    0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__FLEXTIMER1_CH5                  0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DCE_RTS                   0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO05__UART5_DTE_CTS                   0x0014 0x0044 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA                        0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO05__OBSERVE4_OUT                    0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6                       0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC                     0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__FLEXTIMER1_CH6                  0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DCE_RX                    0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_LPSR_GPIO1_IO06__UART5_DTE_TX                    0x0018 0x0048 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL                        0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO06__CCM_WAIT                        0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO06__KPP_ROW4                        0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7                       0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__USB_OTG2_PWR                    0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__FLEXTIMER1_CH7                  0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DCE_TX                    0x001C 0x004C 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__UART5_DTE_RX                    0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA                        0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_LPSR_GPIO1_IO07__CCM_STOP                        0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO07__KPP_COL4                        0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA00__KPP_ROW3                            0x0034 0x02A4 0x0620 0x3 0x0
+#define MX7D_PAD_EPDC_DATA00__EIM_AD0                             0x0034 0x02A4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0                           0x0034 0x02A4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_DATA0                           0x0034 0x02A4 0x0638 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_CLK                             0x0034 0x02A4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1                          0x0038 0x02A8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                      0x0038 0x02A8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                        0x0038 0x02A8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA01__KPP_COL3                            0x0038 0x02A8 0x0600 0x3 0x0
+#define MX7D_PAD_EPDC_DATA01__EIM_AD1                             0x0038 0x02A8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1                           0x0038 0x02A8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_DATA1                           0x0038 0x02A8 0x063C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE                          0x0038 0x02A8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2                          0x003C 0x02AC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                    0x003C 0x02AC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                        0x003C 0x02AC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA02__KPP_ROW2                            0x003C 0x02AC 0x061C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA02__EIM_AD2                             0x003C 0x02AC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2                           0x003C 0x02AC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_DATA2                           0x003C 0x02AC 0x0640 0x6 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC                           0x003C 0x02AC 0x0698 0x7 0x0
+#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3                          0x0040 0x02B0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                     0x0040 0x02B0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                        0x0040 0x02B0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA03__KPP_COL2                            0x0040 0x02B0 0x05FC 0x3 0x0
+#define MX7D_PAD_EPDC_DATA03__EIM_AD3                             0x0040 0x02B0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3                           0x0040 0x02B0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_DATA3                           0x0040 0x02B0 0x0644 0x6 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC                           0x0040 0x02B0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4                          0x0044 0x02B4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                       0x0044 0x02B4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                          0x0044 0x02B4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA04__KPP_ROW1                            0x0044 0x02B4 0x0618 0x3 0x0
+#define MX7D_PAD_EPDC_DATA04__EIM_AD4                             0x0044 0x02B4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4                           0x0044 0x02B4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA04__LCD_DATA4                           0x0044 0x02B4 0x0648 0x6 0x0
+#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL                           0x0044 0x02B4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5                          0x0048 0x02B8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                     0x0048 0x02B8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                         0x0048 0x02B8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA05__KPP_COL1                            0x0048 0x02B8 0x05F8 0x3 0x0
+#define MX7D_PAD_EPDC_DATA05__EIM_AD5                             0x0048 0x02B8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5                           0x0048 0x02B8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA05__LCD_DATA5                           0x0048 0x02B8 0x064C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                         0x0048 0x02B8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6                          0x004C 0x02BC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                      0x004C 0x02BC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                        0x004C 0x02BC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA06__KPP_ROW0                            0x004C 0x02BC 0x0614 0x3 0x0
+#define MX7D_PAD_EPDC_DATA06__EIM_AD6                             0x004C 0x02BC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6                           0x004C 0x02BC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA06__LCD_DATA6                           0x004C 0x02BC 0x0650 0x6 0x0
+#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B                           0x004C 0x02BC 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7                          0x0050 0x02C0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                    0x0050 0x02C0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                        0x0050 0x02C0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA07__KPP_COL0                            0x0050 0x02C0 0x05F4 0x3 0x0
+#define MX7D_PAD_EPDC_DATA07__EIM_AD7                             0x0050 0x02C0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7                           0x0050 0x02C0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA07__LCD_DATA7                           0x0050 0x02C0 0x0654 0x6 0x0
+#define MX7D_PAD_EPDC_DATA07__JTAG_DONE                           0x0050 0x02C0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8                          0x0054 0x02C4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                     0x0054 0x02C4 0x06E4 0x1 0x0
+#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                        0x0054 0x02C4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                        0x0054 0x02C4 0x071C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                        0x0054 0x02C4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__EIM_OE                              0x0054 0x02C4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8                           0x0054 0x02C4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_DATA8                           0x0054 0x02C4 0x0658 0x6 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_BUSY                            0x0054 0x02C4 0x0634 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                          0x0054 0x02C4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9                          0x0058 0x02C8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                      0x0058 0x02C8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                        0x0058 0x02C8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                        0x0058 0x02C8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                        0x0058 0x02C8 0x071C 0x3 0x1
+#define MX7D_PAD_EPDC_DATA09__EIM_RW                              0x0058 0x02C8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9                           0x0058 0x02C8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA9                           0x0058 0x02C8 0x065C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA0                           0x0058 0x02C8 0x0638 0x7 0x1
+#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE                           0x0058 0x02C8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10                         0x005C 0x02CC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                    0x005C 0x02CC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                        0x005C 0x02CC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                       0x005C 0x02CC 0x0718 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                       0x005C 0x02CC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B                           0x005C 0x02CC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10                          0x005C 0x02CC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA10                          0x005C 0x02CC 0x0660 0x6 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA9                           0x005C 0x02CC 0x065C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE                           0x005C 0x02CC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11                         0x0060 0x02D0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                     0x0060 0x02D0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                        0x0060 0x02D0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                       0x0060 0x02D0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                       0x0060 0x02D0 0x0718 0x3 0x1
+#define MX7D_PAD_EPDC_DATA11__EIM_BCLK                            0x0060 0x02D0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11                          0x0060 0x02D0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA11                          0x0060 0x02D0 0x0664 0x6 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA1                           0x0060 0x02D0 0x063C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                          0x0060 0x02D0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12                         0x0064 0x02D4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                       0x0064 0x02D4 0x06E0 0x1 0x0
+#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                          0x0064 0x02D4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                        0x0064 0x02D4 0x0724 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                        0x0064 0x02D4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B                           0x0064 0x02D4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12                          0x0064 0x02D4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA12                          0x0064 0x02D4 0x0668 0x6 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA21                          0x0064 0x02D4 0x068C 0x7 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                          0x0064 0x02D4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13                         0x0068 0x02D8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                     0x0068 0x02D8 0x06EC 0x1 0x0
+#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                         0x0068 0x02D8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                        0x0068 0x02D8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                        0x0068 0x02D8 0x0724 0x3 0x1
+#define MX7D_PAD_EPDC_DATA13__EIM_WAIT                            0x0068 0x02D8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13                          0x0068 0x02D8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_DATA13                          0x0068 0x02D8 0x066C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_CS                              0x0068 0x02D8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE                           0x0068 0x02D8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14                         0x006C 0x02DC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                      0x006C 0x02DC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                        0x006C 0x02DC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                       0x006C 0x02DC 0x0720 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                       0x006C 0x02DC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0                           0x006C 0x02DC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14                          0x006C 0x02DC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA14                          0x006C 0x02DC 0x0670 0x6 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA22                          0x006C 0x02DC 0x0690 0x7 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP                           0x006C 0x02DC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15                         0x0070 0x02E0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                    0x0070 0x02E0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                        0x0070 0x02E0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                       0x0070 0x02E0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                       0x0070 0x02E0 0x0720 0x3 0x1
+#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B                           0x0070 0x02E0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15                          0x0070 0x02E0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_DATA15                          0x0070 0x02E0 0x0674 0x6 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                          0x0070 0x02E0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                        0x0070 0x02E0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                           0x0074 0x02E4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                      0x0074 0x02E4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                      0x0074 0x02E4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4                             0x0074 0x02E4 0x0624 0x3 0x0
+#define MX7D_PAD_EPDC_SDCLK__EIM_AD10                             0x0074 0x02E4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                           0x0074 0x02E4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_CLK                              0x0074 0x02E4 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20                           0x0074 0x02E4 0x0688 0x7 0x0
+#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE                             0x0078 0x02E8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                         0x0078 0x02E8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                       0x0078 0x02E8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDLE__KPP_COL4                              0x0078 0x02E8 0x0604 0x3 0x0
+#define MX7D_PAD_EPDC_SDLE__EIM_AD11                              0x0078 0x02E8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17                            0x0078 0x02E8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA16                            0x0078 0x02E8 0x0678 0x6 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA8                             0x0078 0x02E8 0x0658 0x7 0x1
+#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE                             0x007C 0x02EC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                        0x007C 0x02EC 0x0584 0x1 0x0
+#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                       0x007C 0x02EC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDOE__KPP_COL5                              0x007C 0x02EC 0x0608 0x3 0x1
+#define MX7D_PAD_EPDC_SDOE__EIM_AD12                              0x007C 0x02EC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18                            0x007C 0x02EC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA17                            0x007C 0x02EC 0x067C 0x6 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA23                            0x007C 0x02EC 0x0694 0x7 0x0
+#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                           0x0080 0x02F0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                       0x0080 0x02F0 0x0588 0x1 0x0
+#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                      0x0080 0x02F0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5                             0x0080 0x02F0 0x0628 0x3 0x1
+#define MX7D_PAD_EPDC_SDSHR__EIM_AD13                             0x0080 0x02F0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                           0x0080 0x02F0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18                           0x0080 0x02F0 0x0680 0x6 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10                           0x0080 0x02F0 0x0660 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                           0x0084 0x02F4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                       0x0084 0x02F4 0x058C 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                   0x0084 0x02F4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE0__EIM_AD14                             0x0084 0x02F4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                           0x0084 0x02F4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19                           0x0084 0x02F4 0x0684 0x6 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5                            0x0084 0x02F4 0x064C 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                           0x0088 0x02F8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                       0x0088 0x02F8 0x0590 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                      0x0088 0x02F8 0x0578 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                          0x0088 0x02F8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_SDCE1__EIM_AD15                             0x0088 0x02F8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                           0x0088 0x02F8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20                           0x0088 0x02F8 0x0688 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4                            0x0088 0x02F8 0x0648 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                           0x008C 0x02FC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                      0x008C 0x02FC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                      0x008C 0x02FC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE2__KPP_COL6                             0x008C 0x02FC 0x060C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                           0x008C 0x02FC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                           0x008C 0x02FC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21                           0x008C 0x02FC 0x068C 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3                            0x008C 0x02FC 0x0644 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                           0x0090 0x0300 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                        0x0090 0x0300 0x06E8 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                      0x0090 0x0300 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6                             0x0090 0x0300 0x062C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                           0x0090 0x0300 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                           0x0090 0x0300 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22                           0x0090 0x0300 0x0690 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2                            0x0090 0x0300 0x0640 0x7 0x1
+#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                           0x0094 0x0304 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                       0x0094 0x0304 0x05AC 0x1 0x0
+#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                      0x0094 0x0304 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDCLK__KPP_COL7                             0x0094 0x0304 0x0610 0x3 0x0
+#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                           0x0094 0x0304 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                           0x0094 0x0304 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23                           0x0094 0x0304 0x0694 0x6 0x1
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16                           0x0094 0x0304 0x0678 0x7 0x1
+#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE                             0x0098 0x0308 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                        0x0098 0x0308 0x05B0 0x1 0x0
+#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                       0x0098 0x0308 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDOE__KPP_ROW7                              0x0098 0x0308 0x0630 0x3 0x0
+#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19                            0x0098 0x0308 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25                            0x0098 0x0308 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                            0x0098 0x0308 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_DATA18                            0x0098 0x0308 0x0680 0x7 0x1
+#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL                             0x009C 0x030C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                        0x009C 0x030C 0x05B4 0x1 0x0
+#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                    0x009C 0x030C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20                            0x009C 0x030C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26                            0x009C 0x030C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_RD_E                              0x009C 0x030C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_DATA19                            0x009C 0x030C 0x0684 0x7 0x1
+#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP                             0x00A0 0x0310 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                        0x00A0 0x0310 0x05B8 0x1 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                       0x00A0 0x0310 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                           0x00A0 0x0310 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21                            0x00A0 0x0310 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27                            0x00A0 0x0310 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDSP__LCD_BUSY                              0x00A0 0x0310 0x0634 0x6 0x1
+#define MX7D_PAD_EPDC_GDSP__LCD_DATA17                            0x00A0 0x0310 0x067C 0x7 0x1
+#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0                             0x00A4 0x0314 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                          0x00A4 0x0314 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                     0x00A4 0x0314 0x0570 0x3 0x1
+#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22                            0x00A4 0x0314 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28                            0x00A4 0x0314 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_CS                                0x00A4 0x0314 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_DATA7                             0x00A4 0x0314 0x0654 0x7 0x1
+#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1                             0x00A8 0x0318 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                           0x00A8 0x0318 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                          0x00A8 0x0318 0x0578 0x2 0x1
+#define MX7D_PAD_EPDC_BDR1__EIM_AD8                               0x00A8 0x0318 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29                            0x00A8 0x0318 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE                            0x00A8 0x0318 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_DATA6                             0x00A8 0x0318 0x0650 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                       0x00AC 0x031C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                     0x00AC 0x031C 0x05CC 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                          0x00AC 0x031C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9                            0x00AC 0x031C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                         0x00AC 0x031C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                          0x00AC 0x031C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                         0x00AC 0x031C 0x0664 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                     0x00B0 0x0320 0x0580 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                    0x00B0 0x0320 0x05D0 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                         0x00B0 0x0320 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                         0x00B0 0x0320 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                        0x00B0 0x0320 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                         0x00B0 0x0320 0x0698 0x6 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                        0x00B0 0x0320 0x0668 0x7 0x1
+#define MX7D_PAD_LCD_CLK__LCD_CLK                                 0x00B4 0x0324 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_CLK__ECSPI4_MISO                             0x00B4 0x0324 0x0558 0x1 0x0
+#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                    0x00B4 0x0324 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_CLK__CSI_DATA16                              0x00B4 0x0324 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DCE_RX                            0x00B4 0x0324 0x06FC 0x4 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DTE_TX                            0x00B4 0x0324 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_CLK__GPIO3_IO0                               0x00B4 0x0324 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE                           0x00B8 0x0328 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                          0x00B8 0x0328 0x055C 0x1 0x0
+#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                 0x00B8 0x0328 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_ENABLE__CSI_DATA17                           0x00B8 0x0328 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                         0x00B8 0x0328 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                         0x00B8 0x0328 0x06FC 0x4 0x1
+#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1                            0x00B8 0x0328 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC                             0x00BC 0x032C 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                           0x00BC 0x032C 0x0554 0x1 0x0
+#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                  0x00BC 0x032C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_HSYNC__CSI_DATA18                            0x00BC 0x032C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                         0x00BC 0x032C 0x06F8 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                         0x00BC 0x032C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2                             0x00BC 0x032C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC                             0x00C0 0x0330 0x0698 0x0 0x2
+#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                            0x00C0 0x0330 0x0560 0x1 0x0
+#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                  0x00C0 0x0330 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_VSYNC__CSI_DATA19                            0x00C0 0x0330 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                         0x00C0 0x0330 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                         0x00C0 0x0330 0x06F8 0x4 0x1
+#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3                             0x00C0 0x0330 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_RESET__LCD_RESET                             0x00C4 0x0334 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1                         0x00C4 0x0334 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                   0x00C4 0x0334 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_RESET__CSI_FIELD                             0x00C4 0x0334 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_RESET__EIM_DTACK_B                           0x00C4 0x0334 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_RESET__GPIO3_IO4                             0x00C4 0x0334 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__LCD_DATA0                            0x00C8 0x0338 0x0638 0x0 0x2
+#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                        0x00C8 0x0338 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA00__CSI_DATA20                           0x00C8 0x0338 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA00__EIM_DATA0                            0x00C8 0x0338 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA00__GPIO3_IO5                            0x00C8 0x0338 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                        0x00C8 0x0338 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA01__LCD_DATA1                            0x00CC 0x033C 0x063C 0x0 0x2
+#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                        0x00CC 0x033C 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA01__CSI_DATA21                           0x00CC 0x033C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA01__EIM_DATA1                            0x00CC 0x033C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA01__GPIO3_IO6                            0x00CC 0x033C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                        0x00CC 0x033C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA02__LCD_DATA2                            0x00D0 0x0340 0x0640 0x0 0x2
+#define MX7D_PAD_LCD_DATA02__GPT1_CLK                             0x00D0 0x0340 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA02__CSI_DATA22                           0x00D0 0x0340 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA02__EIM_DATA2                            0x00D0 0x0340 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA02__GPIO3_IO7                            0x00D0 0x0340 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                        0x00D0 0x0340 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA03__LCD_DATA3                            0x00D4 0x0344 0x0644 0x0 0x2
+#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                        0x00D4 0x0344 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA03__CSI_DATA23                           0x00D4 0x0344 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA03__EIM_DATA3                            0x00D4 0x0344 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA03__GPIO3_IO8                            0x00D4 0x0344 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                        0x00D4 0x0344 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA04__LCD_DATA4                            0x00D8 0x0348 0x0648 0x0 0x2
+#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                        0x00D8 0x0348 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA04__CSI_VSYNC                            0x00D8 0x0348 0x0520 0x3 0x0
+#define MX7D_PAD_LCD_DATA04__EIM_DATA4                            0x00D8 0x0348 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA04__GPIO3_IO9                            0x00D8 0x0348 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                        0x00D8 0x0348 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA05__LCD_DATA5                            0x00DC 0x034C 0x064C 0x0 0x2
+#define MX7D_PAD_LCD_DATA05__CSI_HSYNC                            0x00DC 0x034C 0x0518 0x3 0x0
+#define MX7D_PAD_LCD_DATA05__EIM_DATA5                            0x00DC 0x034C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA05__GPIO3_IO10                           0x00DC 0x034C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                        0x00DC 0x034C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA06__LCD_DATA6                            0x00E0 0x0350 0x0650 0x0 0x2
+#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK                           0x00E0 0x0350 0x051C 0x3 0x0
+#define MX7D_PAD_LCD_DATA06__EIM_DATA6                            0x00E0 0x0350 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA06__GPIO3_IO11                           0x00E0 0x0350 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                        0x00E0 0x0350 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA07__LCD_DATA7                            0x00E4 0x0354 0x0654 0x0 0x2
+#define MX7D_PAD_LCD_DATA07__CSI_MCLK                             0x00E4 0x0354 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA07__EIM_DATA7                            0x00E4 0x0354 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA07__GPIO3_IO12                           0x00E4 0x0354 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                        0x00E4 0x0354 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA08__LCD_DATA8                            0x00E8 0x0358 0x0658 0x0 0x2
+#define MX7D_PAD_LCD_DATA08__CSI_DATA9                            0x00E8 0x0358 0x0514 0x3 0x0
+#define MX7D_PAD_LCD_DATA08__EIM_DATA8                            0x00E8 0x0358 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA08__GPIO3_IO13                           0x00E8 0x0358 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                        0x00E8 0x0358 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA09__LCD_DATA9                            0x00EC 0x035C 0x065C 0x0 0x2
+#define MX7D_PAD_LCD_DATA09__CSI_DATA8                            0x00EC 0x035C 0x0510 0x3 0x0
+#define MX7D_PAD_LCD_DATA09__EIM_DATA9                            0x00EC 0x035C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA09__GPIO3_IO14                           0x00EC 0x035C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                        0x00EC 0x035C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA10__LCD_DATA10                           0x00F0 0x0360 0x0660 0x0 0x2
+#define MX7D_PAD_LCD_DATA10__CSI_DATA7                            0x00F0 0x0360 0x050C 0x3 0x0
+#define MX7D_PAD_LCD_DATA10__EIM_DATA10                           0x00F0 0x0360 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA10__GPIO3_IO15                           0x00F0 0x0360 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                       0x00F0 0x0360 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA11__LCD_DATA11                           0x00F4 0x0364 0x0664 0x0 0x2
+#define MX7D_PAD_LCD_DATA11__CSI_DATA6                            0x00F4 0x0364 0x0508 0x3 0x0
+#define MX7D_PAD_LCD_DATA11__EIM_DATA11                           0x00F4 0x0364 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA11__GPIO3_IO16                           0x00F4 0x0364 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                       0x00F4 0x0364 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA12__LCD_DATA12                           0x00F8 0x0368 0x0668 0x0 0x2
+#define MX7D_PAD_LCD_DATA12__CSI_DATA5                            0x00F8 0x0368 0x0504 0x3 0x0
+#define MX7D_PAD_LCD_DATA12__EIM_DATA12                           0x00F8 0x0368 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA12__GPIO3_IO17                           0x00F8 0x0368 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                       0x00F8 0x0368 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA13__LCD_DATA13                           0x00FC 0x036C 0x066C 0x0 0x1
+#define MX7D_PAD_LCD_DATA13__CSI_DATA4                            0x00FC 0x036C 0x0500 0x3 0x0
+#define MX7D_PAD_LCD_DATA13__EIM_DATA13                           0x00FC 0x036C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA13__GPIO3_IO18                           0x00FC 0x036C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                       0x00FC 0x036C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA14__LCD_DATA14                           0x0100 0x0370 0x0670 0x0 0x1
+#define MX7D_PAD_LCD_DATA14__CSI_DATA3                            0x0100 0x0370 0x04FC 0x3 0x0
+#define MX7D_PAD_LCD_DATA14__EIM_DATA14                           0x0100 0x0370 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA14__GPIO3_IO19                           0x0100 0x0370 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                       0x0100 0x0370 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA15__LCD_DATA15                           0x0104 0x0374 0x0674 0x0 0x1
+#define MX7D_PAD_LCD_DATA15__CSI_DATA2                            0x0104 0x0374 0x04F8 0x3 0x0
+#define MX7D_PAD_LCD_DATA15__EIM_DATA15                           0x0104 0x0374 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA15__GPIO3_IO20                           0x0104 0x0374 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                       0x0104 0x0374 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA16__LCD_DATA16                           0x0108 0x0378 0x0678 0x0 0x2
+#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                       0x0108 0x0378 0x0594 0x1 0x0
+#define MX7D_PAD_LCD_DATA16__CSI_DATA1                            0x0108 0x0378 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA16__EIM_CRE                              0x0108 0x0378 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA16__GPIO3_IO21                           0x0108 0x0378 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                       0x0108 0x0378 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA17__LCD_DATA17                           0x010C 0x037C 0x067C 0x0 0x2
+#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                       0x010C 0x037C 0x0598 0x1 0x0
+#define MX7D_PAD_LCD_DATA17__CSI_DATA0                            0x010C 0x037C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                     0x010C 0x037C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA17__GPIO3_IO22                           0x010C 0x037C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                       0x010C 0x037C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA18__LCD_DATA18                           0x0110 0x0380 0x0680 0x0 0x2
+#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                       0x0110 0x0380 0x059C 0x1 0x0
+#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                  0x0110 0x0380 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA18__CSI_DATA15                           0x0110 0x0380 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA18__EIM_CS2_B                            0x0110 0x0380 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA18__GPIO3_IO23                           0x0110 0x0380 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                       0x0110 0x0380 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__EIM_CS3_B                            0x0114 0x0384 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA19__GPIO3_IO24                           0x0114 0x0384 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                       0x0114 0x0384 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__LCD_DATA19                           0x0114 0x0384 0x0684 0x0 0x2
+#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                       0x0114 0x0384 0x05A0 0x1 0x0
+#define MX7D_PAD_LCD_DATA19__CSI_DATA14                           0x0114 0x0384 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA20__EIM_ADDR23                           0x0118 0x0388 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA20__GPIO3_IO25                           0x0118 0x0388 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA20__I2C3_SCL                             0x0118 0x0388 0x05E4 0x6 0x1
+#define MX7D_PAD_LCD_DATA20__LCD_DATA20                           0x0118 0x0388 0x0688 0x0 0x2
+#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                       0x0118 0x0388 0x05BC 0x1 0x0
+#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT                0x0118 0x0388 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA20__CSI_DATA13                           0x0118 0x0388 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__LCD_DATA21                           0x011C 0x038C 0x068C 0x0 0x2
+#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                       0x011C 0x038C 0x05C0 0x1 0x0
+#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT                0x011C 0x038C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA21__CSI_DATA12                           0x011C 0x038C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__EIM_ADDR24                           0x011C 0x038C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA21__GPIO3_IO26                           0x011C 0x038C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA21__I2C3_SDA                             0x011C 0x038C 0x05E8 0x6 0x1
+#define MX7D_PAD_LCD_DATA22__LCD_DATA22                           0x0120 0x0390 0x0690 0x0 0x2
+#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                       0x0120 0x0390 0x05C4 0x1 0x0
+#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT                0x0120 0x0390 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA22__CSI_DATA11                           0x0120 0x0390 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA22__EIM_ADDR25                           0x0120 0x0390 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA22__GPIO3_IO27                           0x0120 0x0390 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA22__I2C4_SCL                             0x0120 0x0390 0x05EC 0x6 0x1
+#define MX7D_PAD_LCD_DATA23__LCD_DATA23                           0x0124 0x0394 0x0694 0x0 0x2
+#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                       0x0124 0x0394 0x05C8 0x1 0x0
+#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT                0x0124 0x0394 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA23__CSI_DATA10                           0x0124 0x0394 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
+#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                        0x0128 0x0398 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN              0x0128 0x0398 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                         0x0128 0x0398 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                        0x0128 0x0398 0x0000 0x6 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                      0x012C 0x039C 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                      0x012C 0x039C 0x06F4 0x0 0x1
+#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA                          0x012C 0x039C 0x05D8 0x1 0x0
+#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                         0x012C 0x039C 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                        0x012C 0x039C 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
+#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x06C4 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0574 0x6 0x1
+#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
+#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
+#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
+#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT             0x0134 0x03A4 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                         0x0134 0x03A4 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC                         0x0134 0x03A4 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                      0x0138 0x03A8 0x0704 0x0 0x2
+#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                      0x0138 0x03A8 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                       0x0138 0x03A8 0x072C 0x1 0x0
+#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                      0x0138 0x03A8 0x06CC 0x2 0x0
+#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                       0x0138 0x03A8 0x0528 0x3 0x0
+#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN              0x0138 0x03A8 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                         0x0138 0x03A8 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL                          0x0138 0x03A8 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                      0x013C 0x03AC 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                      0x013C 0x03AC 0x0704 0x0 0x3
+#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                      0x013C 0x03AC 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                      0x013C 0x03AC 0x06D0 0x2 0x0
+#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                       0x013C 0x03AC 0x052C 0x3 0x0
+#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
+#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
+#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
+#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                         0x0140 0x03B0 0x0000 0x3 0x0
+#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN                0x0140 0x03B0 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6                           0x0140 0x03B0 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RTS_B__SD3_LCTL                            0x0140 0x03B0 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                       0x0144 0x03B4 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                       0x0144 0x03B4 0x0700 0x0 0x3
+#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                        0x0144 0x03B4 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                        0x0144 0x03B4 0x06D4 0x2 0x0
+#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                          0x0144 0x03B4 0x0530 0x3 0x0
+#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT               0x0144 0x03B4 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7                           0x0144 0x03B4 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT                         0x0144 0x03B4 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SCL__I2C1_SCL                               0x0148 0x03B8 0x05D4 0x0 0x1
+#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                          0x0148 0x03B8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                          0x0148 0x03B8 0x0708 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                            0x0148 0x03B8 0x04DC 0x2 0x1
+#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO                            0x0148 0x03B8 0x0548 0x3 0x0
+#define MX7D_PAD_I2C1_SCL__GPIO4_IO8                              0x0148 0x03B8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SCL__SD2_VSELECT                            0x0148 0x03B8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SDA__I2C1_SDA                               0x014C 0x03BC 0x05D8 0x0 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                          0x014C 0x03BC 0x0708 0x1 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                          0x014C 0x03BC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                            0x014C 0x03BC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                            0x014C 0x03BC 0x054C 0x3 0x0
+#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                      0x014C 0x03BC 0x0564 0x4 0x1
+#define MX7D_PAD_I2C1_SDA__GPIO4_IO9                              0x014C 0x03BC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SDA__SD3_VSELECT                            0x014C 0x03BC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C2_SCL__I2C2_SCL                               0x0150 0x03C0 0x05DC 0x0 0x1
+#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX                           0x0150 0x03C0 0x070C 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX                           0x0150 0x03C0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                           0x0150 0x03C0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                            0x0150 0x03C0 0x0544 0x3 0x0
+#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                      0x0150 0x03C0 0x0570 0x4 0x2
+#define MX7D_PAD_I2C2_SCL__GPIO4_IO10                             0x0150 0x03C0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SCL__SD3_CD_B                               0x0150 0x03C0 0x0738 0x6 0x1
+#define MX7D_PAD_I2C2_SDA__I2C2_SDA                               0x0154 0x03C4 0x05E0 0x0 0x1
+#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX                           0x0154 0x03C4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX                           0x0154 0x03C4 0x070C 0x1 0x1
+#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                   0x0154 0x03C4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0                             0x0154 0x03C4 0x0550 0x3 0x0
+#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                      0x0154 0x03C4 0x0000 0x4 0x0
+#define MX7D_PAD_I2C2_SDA__GPIO4_IO11                             0x0154 0x03C4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SDA__SD3_WP                                 0x0154 0x03C4 0x073C 0x6 0x1
+#define MX7D_PAD_I2C3_SCL__I2C3_SCL                               0x0158 0x03C8 0x05E4 0x0 0x2
+#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                          0x0158 0x03C8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                          0x0158 0x03C8 0x0710 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                            0x0158 0x03C8 0x04E0 0x2 0x1
+#define MX7D_PAD_I2C3_SCL__CSI_VSYNC                              0x0158 0x03C8 0x0520 0x3 0x1
+#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                        0x0158 0x03C8 0x06D8 0x4 0x1
+#define MX7D_PAD_I2C3_SCL__GPIO4_IO12                             0x0158 0x03C8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SCL__EPDC_BDR0                              0x0158 0x03C8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C3_SDA__I2C3_SDA                               0x015C 0x03CC 0x05E8 0x0 0x2
+#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                          0x015C 0x03CC 0x0710 0x1 0x1
+#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                          0x015C 0x03CC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                            0x015C 0x03CC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C3_SDA__CSI_HSYNC                              0x015C 0x03CC 0x0518 0x3 0x1
+#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                        0x015C 0x03CC 0x06DC 0x4 0x1
+#define MX7D_PAD_I2C3_SDA__GPIO4_IO13                             0x015C 0x03CC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SDA__EPDC_BDR1                              0x015C 0x03CC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SCL__I2C4_SCL                               0x0160 0x03D0 0x05EC 0x0 0x2
+#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX                           0x0160 0x03D0 0x0714 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX                           0x0160 0x03D0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                           0x0160 0x03D0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK                             0x0160 0x03D0 0x051C 0x3 0x1
+#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID                            0x0160 0x03D0 0x0734 0x4 0x1
+#define MX7D_PAD_I2C4_SCL__GPIO4_IO14                             0x0160 0x03D0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0                             0x0160 0x03D0 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SDA__I2C4_SDA                               0x0164 0x03D4 0x05F0 0x0 0x2
+#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX                           0x0164 0x03D4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX                           0x0164 0x03D4 0x0714 0x1 0x1
+#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                   0x0164 0x03D4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SDA__CSI_MCLK                               0x0164 0x03D4 0x0000 0x3 0x0
+#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID                            0x0164 0x03D4 0x0730 0x4 0x1
+#define MX7D_PAD_I2C4_SDA__GPIO4_IO15                             0x0164 0x03D4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1                             0x0164 0x03D4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                         0x0168 0x03D8 0x0524 0x0 0x1
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                        0x0168 0x03D8 0x071C 0x1 0x2
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                        0x0168 0x03D8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                           0x0168 0x03D8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                           0x0168 0x03D8 0x04F8 0x3 0x1
+#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                          0x0168 0x03D8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                        0x0168 0x03D8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                         0x016C 0x03DC 0x052C 0x0 0x1
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                        0x016C 0x03DC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                        0x016C 0x03DC 0x071C 0x1 0x3
+#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                           0x016C 0x03DC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                           0x016C 0x03DC 0x04FC 0x3 0x1
+#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                          0x016C 0x03DC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                       0x016C 0x03DC 0x0580 0x6 0x1
+#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                         0x0170 0x03E0 0x0528 0x0 0x1
+#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                       0x0170 0x03E0 0x0718 0x1 0x2
+#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                       0x0170 0x03E0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6                           0x0170 0x03E0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4                           0x0170 0x03E0 0x0500 0x3 0x1
+#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                          0x0170 0x03E0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                        0x0170 0x03E0 0x057C 0x6 0x0
+#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                           0x0174 0x03E4 0x0530 0x0 0x1
+#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                        0x0174 0x03E4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                        0x0174 0x03E4 0x0718 0x1 0x3
+#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7                            0x0174 0x03E4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5                            0x0174 0x03E4 0x0504 0x3 0x1
+#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                           0x0174 0x03E4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                       0x0174 0x03E4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                         0x0178 0x03E8 0x0534 0x0 0x0
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                        0x0178 0x03E8 0x0724 0x1 0x2
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                        0x0178 0x03E8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                           0x0178 0x03E8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                           0x0178 0x03E8 0x0508 0x3 0x1
+#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                          0x0178 0x03E8 0x066C 0x4 0x2
+#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                          0x0178 0x03E8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                      0x0178 0x03E8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                         0x017C 0x03EC 0x053C 0x0 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                        0x017C 0x03EC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                        0x017C 0x03EC 0x0724 0x1 0x3
+#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                           0x017C 0x03EC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                           0x017C 0x03EC 0x050C 0x3 0x1
+#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                          0x017C 0x03EC 0x0670 0x4 0x2
+#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                          0x017C 0x03EC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                      0x017C 0x03EC 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                          0x0180 0x03F0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                      0x0180 0x03F0 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                         0x0180 0x03F0 0x0538 0x0 0x0
+#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                       0x0180 0x03F0 0x0720 0x1 0x2
+#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                       0x0180 0x03F0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6                           0x0180 0x03F0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8                           0x0180 0x03F0 0x0510 0x3 0x1
+#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15                          0x0180 0x03F0 0x0674 0x4 0x2
+#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                           0x0184 0x03F4 0x0540 0x0 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                        0x0184 0x03F4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                        0x0184 0x03F4 0x0720 0x1 0x3
+#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7                            0x0184 0x03F4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9                            0x0184 0x03F4 0x0514 0x3 0x1
+#define MX7D_PAD_ECSPI2_SS0__LCD_RESET                            0x0184 0x03F4 0x0000 0x4 0x0
+#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                           0x0184 0x03F4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                        0x0184 0x03F4 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_CD_B__SD1_CD_B                               0x0188 0x03F8 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX                           0x0188 0x03F8 0x071C 0x2 0x4
+#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX                           0x0188 0x03F8 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO                            0x0188 0x03F8 0x0558 0x3 0x1
+#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                         0x0188 0x03F8 0x0584 0x4 0x1
+#define MX7D_PAD_SD1_CD_B__GPIO5_IO0                              0x0188 0x03F8 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CD_B__CCM_CLKO1                              0x0188 0x03F8 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_WP__SD1_WP                                   0x018C 0x03FC 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_WP__UART6_DCE_TX                             0x018C 0x03FC 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_WP__UART6_DTE_RX                             0x018C 0x03FC 0x071C 0x2 0x5
+#define MX7D_PAD_SD1_WP__ECSPI4_MOSI                              0x018C 0x03FC 0x055C 0x3 0x1
+#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                           0x018C 0x03FC 0x0588 0x4 0x1
+#define MX7D_PAD_SD1_WP__GPIO5_IO1                                0x018C 0x03FC 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_WP__CCM_CLKO2                                0x018C 0x03FC 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B                         0x0190 0x0400 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK                           0x0190 0x0400 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                       0x0190 0x0400 0x0718 0x2 0x4
+#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                       0x0190 0x0400 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                         0x0190 0x0400 0x0554 0x3 0x1
+#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                      0x0190 0x0400 0x058C 0x4 0x1
+#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2                           0x0190 0x0400 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CLK__SD1_CLK                                 0x0194 0x0404 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                            0x0194 0x0404 0x06CC 0x1 0x1
+#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS                           0x0194 0x0404 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS                           0x0194 0x0404 0x0718 0x2 0x5
+#define MX7D_PAD_SD1_CLK__ECSPI4_SS0                              0x0194 0x0404 0x0560 0x3 0x1
+#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                          0x0194 0x0404 0x0590 0x4 0x1
+#define MX7D_PAD_SD1_CLK__GPIO5_IO3                               0x0194 0x0404 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CMD__SD1_CMD                                 0x0198 0x0408 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                            0x0198 0x0408 0x06C4 0x1 0x1
+#define MX7D_PAD_SD1_CMD__ECSPI4_SS1                              0x0198 0x0408 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                          0x0198 0x0408 0x05AC 0x4 0x1
+#define MX7D_PAD_SD1_CMD__GPIO5_IO4                               0x0198 0x0408 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__SD1_DATA0                             0x019C 0x040C 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                         0x019C 0x040C 0x06C8 0x1 0x1
+#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX                          0x019C 0x040C 0x0724 0x2 0x4
+#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX                          0x019C 0x040C 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2                            0x019C 0x040C 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                        0x019C 0x040C 0x05B0 0x4 0x1
+#define MX7D_PAD_SD1_DATA0__GPIO5_IO5                             0x019C 0x040C 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                          0x019C 0x040C 0x04E4 0x6 0x1
+#define MX7D_PAD_SD1_DATA1__SD1_DATA1                             0x01A0 0x0410 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                          0x01A0 0x0410 0x06D0 0x1 0x1
+#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX                          0x01A0 0x0410 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX                          0x01A0 0x0410 0x0724 0x2 0x5
+#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3                            0x01A0 0x0410 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                        0x01A0 0x0410 0x05B4 0x4 0x1
+#define MX7D_PAD_SD1_DATA1__GPIO5_IO6                             0x01A0 0x0410 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                          0x01A0 0x0410 0x04E8 0x6 0x1
+#define MX7D_PAD_SD1_DATA2__SD1_DATA2                             0x01A4 0x0414 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                          0x01A4 0x0414 0x06D4 0x1 0x1
+#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                         0x01A4 0x0414 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                         0x01A4 0x0414 0x0720 0x2 0x4
+#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY                            0x01A4 0x0414 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                        0x01A4 0x0414 0x05B8 0x4 0x1
+#define MX7D_PAD_SD1_DATA2__GPIO5_IO7                             0x01A4 0x0414 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                          0x01A4 0x0414 0x04EC 0x6 0x1
+#define MX7D_PAD_SD1_DATA3__SD1_DATA3                             0x01A8 0x0418 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                         0x01A8 0x0418 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                         0x01A8 0x0418 0x0720 0x2 0x5
+#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                         0x01A8 0x0418 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1                            0x01A8 0x0418 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                        0x01A8 0x0418 0x05A4 0x4 0x1
+#define MX7D_PAD_SD1_DATA3__GPIO5_IO8                             0x01A8 0x0418 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                          0x01A8 0x0418 0x04F0 0x6 0x1
+#define MX7D_PAD_SD2_CD_B__SD2_CD_B                               0x01AC 0x041C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CD_B__ENET1_MDIO                             0x01AC 0x041C 0x0568 0x1 0x2
+#define MX7D_PAD_SD2_CD_B__ENET2_MDIO                             0x01AC 0x041C 0x0574 0x2 0x2
+#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2                             0x01AC 0x041C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                         0x01AC 0x041C 0x05A8 0x4 0x1
+#define MX7D_PAD_SD2_CD_B__GPIO5_IO9                              0x01AC 0x041C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                        0x01AC 0x041C 0x06D8 0x6 0x2
+#define MX7D_PAD_SD2_WP__SD2_WP                                   0x01B0 0x0420 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_WP__ENET1_MDC                                0x01B0 0x0420 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_WP__ENET2_MDC                                0x01B0 0x0420 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_WP__ECSPI3_SS3                               0x01B0 0x0420 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_WP__USB_OTG1_ID                              0x01B0 0x0420 0x0734 0x4 0x2
+#define MX7D_PAD_SD2_WP__GPIO5_IO10                               0x01B0 0x0420 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                          0x01B0 0x0420 0x06DC 0x6 0x2
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B                         0x01B4 0x0424 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK                           0x01B4 0x0424 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET                           0x01B4 0x0424 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                          0x01B4 0x0424 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                         0x01B4 0x0424 0x0730 0x4 0x2
+#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11                          0x01B4 0x0424 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CLK__SD2_CLK                                 0x01B8 0x0428 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                            0x01B8 0x0428 0x06B8 0x1 0x0
+#define MX7D_PAD_SD2_CLK__MQS_RIGHT                               0x01B8 0x0428 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CLK__GPT4_CLK                                0x01B8 0x0428 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CLK__GPIO5_IO12                              0x01B8 0x0428 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CMD__SD2_CMD                                 0x01BC 0x042C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                            0x01BC 0x042C 0x06B0 0x1 0x0
+#define MX7D_PAD_SD2_CMD__MQS_LEFT                                0x01BC 0x042C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                           0x01BC 0x042C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                         0x01BC 0x042C 0x06EC 0x4 0x1
+#define MX7D_PAD_SD2_CMD__GPIO5_IO13                              0x01BC 0x042C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA0__SD2_DATA0                             0x01C0 0x0430 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                         0x01C0 0x0430 0x06B4 0x1 0x0
+#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX                          0x01C0 0x0430 0x070C 0x2 0x2
+#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX                          0x01C0 0x0430 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                         0x01C0 0x0430 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                        0x01C0 0x0430 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA0__GPIO5_IO14                            0x01C0 0x0430 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA1__SD2_DATA1                             0x01C4 0x0434 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                          0x01C4 0x0434 0x06BC 0x1 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX                          0x01C4 0x0434 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX                          0x01C4 0x0434 0x070C 0x2 0x3
+#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                         0x01C4 0x0434 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                      0x01C4 0x0434 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA1__GPIO5_IO15                            0x01C4 0x0434 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA2__SD2_DATA2                             0x01C8 0x0438 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                          0x01C8 0x0438 0x06C0 0x1 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                         0x01C8 0x0438 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                         0x01C8 0x0438 0x0708 0x2 0x2
+#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                         0x01C8 0x0438 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                       0x01C8 0x0438 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA2__GPIO5_IO16                            0x01C8 0x0438 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA3__SD2_DATA3                             0x01CC 0x043C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                         0x01CC 0x043C 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                         0x01CC 0x043C 0x0708 0x2 0x3
+#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                         0x01CC 0x043C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                         0x01CC 0x043C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                         0x01CC 0x043C 0x06E8 0x4 0x1
+#define MX7D_PAD_SD2_DATA3__GPIO5_IO17                            0x01CC 0x043C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CLK__SD3_CLK                                 0x01D0 0x0440 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CLK__NAND_CLE                                0x01D0 0x0440 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CLK__ECSPI4_MISO                             0x01D0 0x0440 0x0558 0x2 0x2
+#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                            0x01D0 0x0440 0x06CC 0x3 0x2
+#define MX7D_PAD_SD3_CLK__GPT3_CLK                                0x01D0 0x0440 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CLK__GPIO6_IO0                               0x01D0 0x0440 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CMD__SD3_CMD                                 0x01D4 0x0444 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CMD__NAND_ALE                                0x01D4 0x0444 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI                             0x01D4 0x0444 0x055C 0x2 0x2
+#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                            0x01D4 0x0444 0x06C4 0x3 0x2
+#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                           0x01D4 0x0444 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CMD__GPIO6_IO1                               0x01D4 0x0444 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA0__SD3_DATA0                             0x01D8 0x0448 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA0__NAND_DATA00                           0x01D8 0x0448 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0                            0x01D8 0x0448 0x0560 0x2 0x2
+#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                         0x01D8 0x0448 0x06C8 0x3 0x2
+#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                         0x01D8 0x0448 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA0__GPIO6_IO2                             0x01D8 0x0448 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA1__SD3_DATA1                             0x01DC 0x044C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA1__NAND_DATA01                           0x01DC 0x044C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                           0x01DC 0x044C 0x0554 0x2 0x2
+#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                          0x01DC 0x044C 0x06D0 0x3 0x2
+#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                         0x01DC 0x044C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA1__GPIO6_IO3                             0x01DC 0x044C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA2__SD3_DATA2                             0x01E0 0x0450 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA2__NAND_DATA02                           0x01E0 0x0450 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA2__I2C3_SDA                              0x01E0 0x0450 0x05E8 0x2 0x3
+#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                          0x01E0 0x0450 0x06D4 0x3 0x2
+#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                         0x01E0 0x0450 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA2__GPIO6_IO4                             0x01E0 0x0450 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA3__SD3_DATA3                             0x01E4 0x0454 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA3__NAND_DATA03                           0x01E4 0x0454 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA3__I2C3_SCL                              0x01E4 0x0454 0x05E4 0x2 0x3
+#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                         0x01E4 0x0454 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                         0x01E4 0x0454 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA3__GPIO6_IO5                             0x01E4 0x0454 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA4__SD3_DATA4                             0x01E8 0x0458 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA4__NAND_DATA04                           0x01E8 0x0458 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX                          0x01E8 0x0458 0x0704 0x3 0x4
+#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX                          0x01E8 0x0458 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                           0x01E8 0x0458 0x04E0 0x4 0x2
+#define MX7D_PAD_SD3_DATA4__GPIO6_IO6                             0x01E8 0x0458 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA5__SD3_DATA5                             0x01EC 0x045C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA5__NAND_DATA05                           0x01EC 0x045C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX                          0x01EC 0x045C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX                          0x01EC 0x045C 0x0704 0x3 0x5
+#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                           0x01EC 0x045C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA5__GPIO6_IO7                             0x01EC 0x045C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_DATA6                             0x01F0 0x0460 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA6__NAND_DATA06                           0x01F0 0x0460 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_WP                                0x01F0 0x0460 0x073C 0x2 0x2
+#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                         0x01F0 0x0460 0x0700 0x3 0x4
+#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                         0x01F0 0x0460 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                           0x01F0 0x0460 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA6__GPIO6_IO8                             0x01F0 0x0460 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_DATA7                             0x01F4 0x0464 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA7__NAND_DATA07                           0x01F4 0x0464 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_CD_B                              0x01F4 0x0464 0x0738 0x2 0x2
+#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                         0x01F4 0x0464 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                         0x01F4 0x0464 0x0700 0x3 0x5
+#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                           0x01F4 0x0464 0x04DC 0x4 0x2
+#define MX7D_PAD_SD3_DATA7__GPIO6_IO9                             0x01F4 0x0464 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_STROBE__SD3_STROBE                           0x01F8 0x0468 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_STROBE__NAND_RE_B                            0x01F8 0x0468 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_STROBE__GPIO6_IO10                           0x01F8 0x0468 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B                         0x01FC 0x046C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_RESET_B__NAND_WE_B                           0x01FC 0x046C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET                           0x01FC 0x046C 0x0000 0x2 0x0
+#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK                           0x01FC 0x046C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11                          0x01FC 0x046C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                      0x0200 0x0470 0x06A0 0x0 0x0
+#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                         0x0200 0x0470 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                       0x0200 0x0470 0x0714 0x2 0x2
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                       0x0200 0x0470 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                        0x0200 0x0470 0x04DC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                    0x0200 0x0470 0x06E4 0x4 0x1
+#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                         0x0200 0x0470 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                   0x0200 0x0470 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                       0x0204 0x0474 0x06A8 0x0 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                         0x0204 0x0474 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                       0x0204 0x0474 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                       0x0204 0x0474 0x0714 0x2 0x3
+#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                        0x0204 0x0474 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                     0x0204 0x0474 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                         0x0204 0x0474 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                    0x0204 0x0474 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                       0x0208 0x0478 0x06AC 0x0 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                           0x0208 0x0478 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                      0x0208 0x0478 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                      0x0208 0x0478 0x0710 0x2 0x2
+#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                        0x0208 0x0478 0x04E0 0x3 0x3
+#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                   0x0208 0x0478 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                         0x0208 0x0478 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                       0x0208 0x0478 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                      0x020C 0x047C 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                       0x020C 0x047C 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                      0x020C 0x047C 0x0710 0x2 0x3
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                      0x020C 0x047C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                        0x020C 0x047C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                    0x020C 0x047C 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                         0x020C 0x047C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                   0x020C 0x047C 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                       0x0210 0x0480 0x06A4 0x0 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                         0x0210 0x0480 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                       0x0210 0x0480 0x06B8 0x2 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                           0x0210 0x0480 0x05EC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                      0x0210 0x0480 0x06E0 0x4 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                         0x0210 0x0480 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                          0x0210 0x0480 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                   0x0210 0x0480 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                       0x0214 0x0484 0x069C 0x0 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                         0x0214 0x0484 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                       0x0214 0x0484 0x06B0 0x2 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                           0x0214 0x0484 0x05F0 0x3 0x3
+#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                     0x0214 0x0484 0x05CC 0x4 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                         0x0214 0x0484 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                           0x0214 0x0484 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                   0x0214 0x0484 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK                             0x0218 0x0488 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_MCLK__NAND_WP_B                             0x0218 0x0488 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK                             0x0218 0x0488 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                        0x0218 0x0488 0x04F4 0x3 0x3
+#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                        0x0218 0x0488 0x05D0 0x4 0x1
+#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18                            0x0218 0x0488 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                        0x0218 0x0488 0x0000 0x7 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                       0x021C 0x048C 0x06C0 0x0 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                        0x021C 0x048C 0x0548 0x1 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                       0x021C 0x048C 0x070C 0x2 0x4
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                       0x021C 0x048C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                      0x021C 0x048C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                      0x021C 0x048C 0x06F0 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                     0x021C 0x048C 0x05BC 0x4 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                         0x021C 0x048C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                       0x0220 0x0490 0x06BC 0x0 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                        0x0220 0x0490 0x054C 0x1 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                       0x0220 0x0490 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                       0x0220 0x0490 0x070C 0x2 0x5
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                      0x0220 0x0490 0x06F0 0x3 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                      0x0220 0x0490 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                     0x0220 0x0490 0x05C0 0x4 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                         0x0220 0x0490 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                      0x0224 0x0494 0x06B4 0x0 0x1
+#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                        0x0224 0x0494 0x0544 0x1 0x1
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                      0x0224 0x0494 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                      0x0224 0x0494 0x0708 0x2 0x4
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                      0x0224 0x0494 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                      0x0224 0x0494 0x06F8 0x3 0x2
+#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                     0x0224 0x0494 0x05C4 0x4 0x1
+#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                         0x0224 0x0494 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7                           0x0224 0x0494 0x0610 0x6 0x1
+#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                      0x0228 0x0498 0x0000 0x0 0x0
+#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                         0x0228 0x0498 0x0550 0x1 0x1
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                      0x0228 0x0498 0x0708 0x2 0x5
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                      0x0228 0x0498 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                      0x0228 0x0498 0x06F8 0x3 0x3
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                      0x0228 0x0498 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                     0x0228 0x0498 0x05C8 0x4 0x1
+#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                         0x0228 0x0498 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                           0x0228 0x0498 0x0630 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                 0x022C 0x049C 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                        0x022C 0x049C 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                        0x022C 0x049C 0x05E4 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                   0x022C 0x049C 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                   0x022C 0x049C 0x06F0 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                      0x022C 0x049C 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                       0x022C 0x049C 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                        0x022C 0x049C 0x0620 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                 0x0230 0x04A0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                        0x0230 0x04A0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                        0x0230 0x04A0 0x05E8 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                   0x0230 0x04A0 0x06F0 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                   0x0230 0x04A0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                      0x0230 0x04A0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                       0x0230 0x04A0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                        0x0230 0x04A0 0x0600 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                 0x0234 0x04A4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                     0x0234 0x04A4 0x04DC 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                     0x0234 0x04A4 0x0534 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                    0x0234 0x04A4 0x06F4 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                    0x0234 0x04A4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                      0x0234 0x04A4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                       0x0234 0x04A4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                        0x0234 0x04A4 0x061C 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                 0x0238 0x04A8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                     0x0238 0x04A8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                     0x0238 0x04A8 0x053C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                    0x0238 0x04A8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                    0x0238 0x04A8 0x06F4 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                      0x0238 0x04A8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                       0x0238 0x04A8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                        0x0238 0x04A8 0x05FC 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL           0x023C 0x04AC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                   0x023C 0x04AC 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                   0x023C 0x04AC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                    0x023C 0x04AC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                     0x023C 0x04AC 0x0618 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                 0x0240 0x04B0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                     0x0240 0x04B0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                      0x0240 0x04B0 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                      0x0240 0x04B0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                       0x0240 0x04B0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                        0x0240 0x04B0 0x0000 0x6 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                 0x0244 0x04B4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                        0x0244 0x04B4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                      0x0244 0x04B4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                      0x0244 0x04B4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                       0x0244 0x04B4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                        0x0244 0x04B4 0x0614 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                 0x0248 0x04B8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                        0x0248 0x04B8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                      0x0248 0x04B8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                      0x0248 0x04B8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                       0x0248 0x04B8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                        0x0248 0x04B8 0x05F4 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                 0x024C 0x04BC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                     0x024C 0x04BC 0x04E0 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                     0x024C 0x04BC 0x0538 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                        0x024C 0x04BC 0x05EC 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                      0x024C 0x04BC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                       0x024C 0x04BC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                 0x0250 0x04C0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                     0x0250 0x04C0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                      0x0250 0x04C0 0x0540 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                        0x0250 0x04C0 0x05F0 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                      0x0250 0x04C0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                       0x0250 0x04C0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS                0x0250 0x04C0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL           0x0254 0x04C4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                 0x0254 0x04C4 0x06A4 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1                0x0254 0x04C4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2               0x0254 0x04C4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                   0x0254 0x04C4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                 0x0258 0x04C8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                     0x0258 0x04C8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                    0x0258 0x04C8 0x069C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                   0x0258 0x04C8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                  0x0258 0x04C8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                      0x0258 0x04C8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                       0x025C 0x04CC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                  0x025C 0x04CC 0x0564 0x1 0x2
+#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                      0x025C 0x04CC 0x06A0 0x2 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                      0x025C 0x04CC 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                       0x025C 0x04CC 0x057C 0x4 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
+#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
+#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
+#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                      0x0260 0x04D0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                         0x0260 0x04D0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                       0x0260 0x04D0 0x04E8 0x6 0x2
+#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                     0x0260 0x04D0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_CRS__ENET1_CRS                             0x0264 0x04D4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                  0x0264 0x04D4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                          0x0264 0x04D4 0x06AC 0x2 0x1
+#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                         0x0264 0x04D4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                        0x0264 0x04D4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_CRS__GPIO7_IO14                            0x0264 0x04D4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                          0x0264 0x04D4 0x04EC 0x6 0x2
+#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                        0x0264 0x04D4 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_COL__ENET1_COL                             0x0268 0x04D8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                        0x0268 0x04D8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                         0x0268 0x04D8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                         0x0268 0x04D8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                        0x0268 0x04D8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_COL__GPIO7_IO15                            0x0268 0x04D8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                          0x0268 0x04D8 0x04F0 0x6 0x2
+#define MX7D_PAD_ENET1_COL__CSU_INT_DEB                           0x0268 0x04D8 0x0000 0x7 0x0
+
+#endif /* __DTS_IMX7D_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644
index 000000000..f8a868552
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+	model = "CompuLab SBC-iMX7";
+	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
new file mode 100644
index 000000000..cabdaa6dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d-sdb.dts"
+
+/ {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec2 {
+	/delete-property/phy-supply;
+};
+
+&iomuxc {
+	imx7d-sdb {
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			>;
+		};
+
+		pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+			fsl,pins = <
+				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
new file mode 100644
index 000000000..996555596
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb-sht11.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+#include "imx7d-sdb.dts"
+
+/ {
+	sensor {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensor>;
+		compatible = "sensirion,sht15";
+		clk-gpios = <&gpio4 12 0>;
+		data-gpios = <&gpio4 13 0>;
+		vcc-supply = <&reg_sht15>;
+	};
+
+	reg_sht15: regulator-sht15 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_sht15";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_sensor: sensorgrp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13	0x4000007f
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12	0x4000007f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
new file mode 100644
index 000000000..d3b49a5b3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	spi4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "brcm_reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_fec2_3v3: regulator-fec2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx7d-evk-wm8960",
+			     "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&codec>;
+		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "AMIC",
+			"AMIC", "MICB";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names ="default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_3v3>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+		assigned-clock-rates = <0>, <884736000>, <12288000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_1p0d {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+	vin-supply = <&sw2_reg>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	wakeup-source;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	fsl,tuning-step = <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx7d-sdb {
+		pinctrl_brcm_reg: brcmreggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
+		pinctrl_enet2_reg: enet2reggrp {
+			fsl,pins = <
+				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+			>;
+		};
+
+		pinctrl_flexcan2_reg: flexcan2reggrp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
+				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_lcdif: lcdifgrp {
+			fsl,pins = <
+				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+			>;
+		};
+
+		pinctrl_sai1: sai1grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
+				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
+				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
+				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
+			>;
+		};
+
+		pinctrl_sai3: sai3grp {
+			fsl,pins = <
+				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
+				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
+				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
+			>;
+		};
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+			>;
+		};
+
+		pinctrl_tsc2046_pendown: tsc2046_pendown {
+			fsl,pins = <
+				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_uart6: uart6grp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+			>;
+		};
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
+		>;
+	};
+
+	pinctrl_sai3_mclk: sai3grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
new file mode 100644
index 000000000..598aed1ff
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-tqma7.dtsi"
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
new file mode 100644
index 000000000..106594180
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RMU2 board
+ *
+ * RMU - Remote Modem Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RMU2 Board";
+	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&fec1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fec1_phy: ethernet-phy@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
+				    <&pinctrl_enet1_phy_interrupt>;
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet1_phy_reset: enet1phyresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
+
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: ledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
+		fsl,phy = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
new file mode 100644
index 000000000..893bd30aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -0,0 +1,923 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RPU2 board
+ *
+ * RPU - Remote Peripheral Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RPU2 Board";
+	compatible = "zii,imx7d-rpu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	cs2000_ref: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: dummy-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc2 1>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 1";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 2";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound3 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Audio Output 3";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound3_codec>;
+		simple-audio-card,frame-master = <&sound3_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPLEFT",
+			"Headphone Jack", "HPRIGHT",
+			"LEFTIN", "HPL",
+			"RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa3>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		sound3_codec: simple-audio-card,codec {
+			sound-dai = <&codec3>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "pic";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&fec1>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "gigabit_proc";
+					ethernet = <&fec2>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "",
+			  "usb_1_en_b",
+			  "usb_2_en_b",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio2>;
+
+	gpio-line-names = "12v_out_en_1",
+			  "12v_out_en_2",
+			  "12v_out_en_3",
+			  "28v_out_en_5",
+			  "28v_out_en_1",
+			  "28v_out_en_2",
+			  "28v_out_en_3",
+			  "28v_out_en_4",
+			  "", "",
+			  "usb_3_en_b",
+			  "usb_4_en_b",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec3: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec3>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa3: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa3>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_3p3v>;
+		SPRVDD-supply = <&reg_3p3v>;
+		SPLVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&vgen4_reg>;
+		gpio-reset = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0v_main>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX7D_SAI2_ROOT_SRC>,
+			  <&clks IMX7D_SAI2_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC			0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0			0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1			0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2			0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3			0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL			0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC			0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0			0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1			0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2			0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3			0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL			0x1
+			MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT		0x1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x59
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO08__GPIO1_IO8		0x59
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x59
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x00
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x00
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x00
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x00
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x00
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x03
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x03
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x03
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x03
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x03
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x00
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x00
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x4000007f
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: debuggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK	0x1f
+			MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC	0x1f
+			MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK	0x1f
+			MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC	0x1f
+			MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x40000038
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x40000038
+		>;
+	};
+
+	pinctrl_tpa3: tpa6130-3grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x40000038
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x40000038
+		>;
+	};
+
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x40000038
+		>;
+	};
+
+	pinctrl_codec3: dac3grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x40000038
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
new file mode 100644
index 000000000..b0bcfa909
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
+
+#include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_sleep_wait>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xd>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-996000000 {
+			opp-hz = /bits/ 64 <996000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			opp-suspend;
+		};
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
+
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+	};
+};
+
+&aips2 {
+	pcie_phy: pcie-phy@306d0000 {
+		  compatible = "fsl,imx7d-pcie-phy";
+		  reg = <0x306d0000 0x10000>;
+		  status = "disabled";
+	};
+};
+
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
+
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupt-names = "int0", "int1", "int2", "pps";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		fsl,stop-mode = <&gpr 0x10 4>;
+		status = "disabled";
+	};
+
+	pcie: pcie@33800000 {
+		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
+		reg = <0x33800000 0x4000>,
+		      <0x4ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+		num-lanes = <1>;
+		num-viewport = <4>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		/*
+		 * Reference manual lists pci irqs incorrectly
+		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+		 */
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+		clock-names = "pcie", "pcie_bus", "pcie_phy";
+		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+		fsl,max-link-speed = <2>;
+		power-domains = <&pgc_pcie_phy>;
+		resets = <&src IMX7_RESET_PCIEPHY>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+		reset-names = "pciephy", "apps", "turnoff";
+		fsl,imx7d-pcie-phy = <&pcie_phy>;
+		status = "disabled";
+	};
+};
+
+&ca_funnel_in_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			remote-endpoint = <&etm1_out_port>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
new file mode 100644
index 000000000..fca4e0a95
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
new file mode 100644
index 000000000..aa70d3f2e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
new file mode 100644
index 000000000..94de220a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2016-2020 Toradex
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
new file mode 100644
index 000000000..a143d566a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-mba7.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7s-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ Systems TQMa7S board on MBa7 carrier board";
+	compatible = "tq,imx7s-mba7", "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
new file mode 100644
index 000000000..5f5433eb7
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
+ *
+ * Copyright (C) 2016 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
new file mode 100644
index 000000000..e035dd5bf
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_peri_3p15v: regulator-peri-3p15v {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3p15v_reg";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov2680: camera@36 {
+		compatible = "ovti,ov2680";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2680>;
+		reg = <0x36>;
+		clocks = <&osc>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&sw2_reg>;
+		DVDD-supply = <&sw2_reg>;
+		AVDD-supply = <&reg_peri_3p15v>;
+
+		port {
+			ov2680_to_mipi: endpoint {
+				remote-endpoint = <&mipi_from_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&mipi_csi {
+	clock-frequency = <166000000>;
+	fsl,csis-hs-settle = <3>;
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_from_sensor: endpoint {
+			remote-endpoint = <&ov2680_to_mipi>;
+			data-lanes = <1>;
+		};
+
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&video_mux {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_ov2680: ov2660grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
new file mode 100644
index 000000000..03bde2fb9
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/imx7-reset.h>
+#include "imx7d-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usb0 = &usbotg1;
+		usb1 = &usbh;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_wait: cpu-sleep-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <50>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <792000000>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+			cpu-idle-states = <&cpu_sleep_wait>;
+		};
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY1_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	usbphynop3: usbphynop3 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
+		#phy-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+				/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		funnel@30041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_in_ports: in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+			};
+		};
+
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@30083000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						/* M4 input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
+				};
+			};
+		};
+
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: timer@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			kpp: keypad@30320000 {
+				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr",
+					"fsl,imx6q-iomuxc-gpr", "syscon",
+					"simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x14 0x00000010>;
+				};
+
+				video_mux: csi-mux {
+					compatible = "video-mux";
+					mux-controls = <&mux 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						csi_mux_from_mipi_vc0: endpoint {
+							remote-endpoint = <&mipi_vc0_to_csi_mux>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						csi_mux_to_csi: endpoint {
+							remote-endpoint = <&csi_from_csi_mux>;
+						};
+					};
+				};
+			};
+
+			ocotp: efuse@30350000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx7d-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_OCOTP_CLK>;
+
+				tempmon_calib: calib@3c {
+					reg = <0x3c 0x4>;
+				};
+
+				fuse_grade: fuse-grade@10 {
+					reg = <0x10 0x4>;
+				};
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-mfd";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_1p2: regulator-vdd1p2 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p2";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1300000>;
+					anatop-reg-offset = <0x220>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0x14>;
+					anatop-min-voltage = <1100000>;
+					anatop-max-voltage = <1300000>;
+					anatop-enable-bit = <0>;
+				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx7d-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clks: clock-controller@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx7d-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx7d-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+				interrupt-parent = <&intc>;
+				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi_phy: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <0>;
+						power-supply = <&reg_1p0d>;
+					};
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <1>;
+						power-supply = <&reg_1p0d>;
+					};
+
+					pgc_hsic_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <2>;
+						power-supply = <&reg_1p2>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			ecspi4: spi@30630000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30630000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+					<&clks IMX7D_ECSPI4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			csi: csi@30710000 {
+				compatible = "fsl,imx7-csi";
+				reg = <0x30710000 0x10000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "axi", "mclk", "dcic";
+				status = "disabled";
+
+				port {
+					csi_from_csi_mux: endpoint {
+						remote-endpoint = <&csi_mux_to_csi>;
+					};
+				};
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+				clock-names = "pix", "axi";
+				status = "disabled";
+			};
+
+			mipi_csi: mipi-csi@30750000 {
+				compatible = "fsl,imx7-mipi-csi2";
+				reg = <0x30750000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "pclk", "wrap", "phy";
+				power-domains = <&pgc_mipi_phy>;
+				phy-supply = <&reg_1p0d>;
+				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+				reset-names = "mrst";
+				status = "disabled";
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+
+					mipi_vc0_to_csi_mux: endpoint {
+						remote-endpoint = <&csi_mux_from_mipi_vc0>;
+					};
+				};
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+						<&clks IMX7D_ECSPI1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+						<&clks IMX7D_ECSPI2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+						<&clks IMX7D_ECSPI3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+						<&clks IMX7D_UART1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+						<&clks IMX7D_UART2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+						<&clks IMX7D_UART3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@308a0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308a0000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+						 <&clks IMX7D_SAI1_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+					status = "disabled";
+				};
+
+				sai2: sai@308b0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308b0000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+						 <&clks IMX7D_SAI2_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+					status = "disabled";
+				};
+
+				sai3: sai@308c0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+						 <&clks IMX7D_SAI3_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CAAM_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "aclk";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			mu0a: mailbox@30aa0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu0b: mailbox@30ab0000 {
+				compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+				reg = <0x30ab0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_MU_ROOT_CLK>;
+				#mbox-cells = <2>;
+				fsl,mu-side-b;
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			qspi: spi@30bb0000 {
+				compatible = "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_QSPI_ROOT_CLK>,
+					<&clks IMX7D_QSPI_ROOT_CLK>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					 <&clks IMX7D_SDMA_CORE_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupt-names = "int0", "int1", "int2", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000{
+			compatible = "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/imx7ulp-com.dts
new file mode 100644
index 000000000..d76fea3b3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp-com.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Embedded Artists i.MX7ULP COM";
+	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x4000000>;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
new file mode 100644
index 000000000..eff51e113
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+
+/ {
+	model = "NXP i.MX7ULP EVK";
+	compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm4 1 50000 0>;
+		brightness-levels = <0 20 25 30 35 40 100>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc0_rst>;
+		gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&tpm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio_ptc 10 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+		bias-pull-up;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTF2__TPM4_CH1	0x2
+		>;
+	};
+
+	pinctrl_usbotg1_vbus: otg1vbusgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC0__PTC0		0x20000
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x40
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTC10__PTC10	0x3	/* CD */
+		>;
+	};
+
+	pinctrl_usdhc0_rst: usdhc0-gpio-rst-grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD0__PTD0		0x3
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/imx7ulp-pinfunc.h
new file mode 100644
index 000000000..c0148d79b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp-pinfunc.h
@@ -0,0 +1,478 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __DTS_IMX7ULP_PINFUNC_H
+#define __DTS_IMX7ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_conf_reg input_reg mux_mode input_val>
+ */
+
+#define IMX7ULP_PAD_PTC0__PTC0                                       0x0000 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC0__TRACE_D15                                  0x0000 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC0__LPUART4_CTS_B                              0x0000 0x0244 0x4 0x1
+#define IMX7ULP_PAD_PTC0__LPI2C4_SCL                                 0x0000 0x0278 0x5 0x1
+#define IMX7ULP_PAD_PTC0__TPM4_CLKIN                                 0x0000 0x0298 0x6 0x1
+#define IMX7ULP_PAD_PTC0__FB_AD0                                     0x0000 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC1__PTC1                                       0x0004 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC1__TRACE_D14                                  0x0004 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC1__LPUART4_RTS_B                              0x0004 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC1__LPI2C4_SDA                                 0x0004 0x027c 0x5 0x1
+#define IMX7ULP_PAD_PTC1__TPM4_CH0                                   0x0004 0x0280 0x6 0x1
+#define IMX7ULP_PAD_PTC1__FB_AD1                                     0x0004 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC2__PTC2                                       0x0008 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC2__TRACE_D13                                  0x0008 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC2__LPUART4_TX                                 0x0008 0x024c 0x4 0x1
+#define IMX7ULP_PAD_PTC2__LPI2C4_HREQ                                0x0008 0x0274 0x5 0x1
+#define IMX7ULP_PAD_PTC2__TPM4_CH1                                   0x0008 0x0284 0x6 0x1
+#define IMX7ULP_PAD_PTC2__FB_AD2                                     0x0008 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC3__PTC3                                       0x000c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC3__TRACE_D12                                  0x000c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC3__LPUART4_RX                                 0x000c 0x0248 0x4 0x1
+#define IMX7ULP_PAD_PTC3__TPM4_CH2                                   0x000c 0x0288 0x6 0x1
+#define IMX7ULP_PAD_PTC3__FB_AD3                                     0x000c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC4__PTC4                                       0x0010 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC4__TRACE_D11                                  0x0010 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC4__FXIO1_D0                                   0x0010 0x0204 0x2 0x1
+#define IMX7ULP_PAD_PTC4__LPSPI2_PCS1                                0x0010 0x02a0 0x3 0x1
+#define IMX7ULP_PAD_PTC4__LPUART5_CTS_B                              0x0010 0x0250 0x4 0x1
+#define IMX7ULP_PAD_PTC4__LPI2C5_SCL                                 0x0010 0x02bc 0x5 0x1
+#define IMX7ULP_PAD_PTC4__TPM4_CH3                                   0x0010 0x028c 0x6 0x1
+#define IMX7ULP_PAD_PTC4__FB_AD4                                     0x0010 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC5__PTC5                                       0x0014 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC5__TRACE_D10                                  0x0014 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC5__FXIO1_D1                                   0x0014 0x0208 0x2 0x1
+#define IMX7ULP_PAD_PTC5__LPSPI2_PCS2                                0x0014 0x02a4 0x3 0x1
+#define IMX7ULP_PAD_PTC5__LPUART5_RTS_B                              0x0014 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC5__LPI2C5_SDA                                 0x0014 0x02c0 0x5 0x1
+#define IMX7ULP_PAD_PTC5__TPM4_CH4                                   0x0014 0x0290 0x6 0x1
+#define IMX7ULP_PAD_PTC5__FB_AD5                                     0x0014 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC6__PTC6                                       0x0018 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC6__TRACE_D9                                   0x0018 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC6__FXIO1_D2                                   0x0018 0x020c 0x2 0x1
+#define IMX7ULP_PAD_PTC6__LPSPI2_PCS3                                0x0018 0x02a8 0x3 0x1
+#define IMX7ULP_PAD_PTC6__LPUART5_TX                                 0x0018 0x0258 0x4 0x1
+#define IMX7ULP_PAD_PTC6__LPI2C5_HREQ                                0x0018 0x02b8 0x5 0x1
+#define IMX7ULP_PAD_PTC6__TPM4_CH5                                   0x0018 0x0294 0x6 0x1
+#define IMX7ULP_PAD_PTC6__FB_AD6                                     0x0018 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC7__PTC7                                       0x001c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC7__TRACE_D8                                   0x001c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC7__FXIO1_D3                                   0x001c 0x0210 0x2 0x1
+#define IMX7ULP_PAD_PTC7__LPUART5_RX                                 0x001c 0x0254 0x4 0x1
+#define IMX7ULP_PAD_PTC7__TPM5_CH1                                   0x001c 0x02c8 0x6 0x1
+#define IMX7ULP_PAD_PTC7__FB_AD7                                     0x001c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC8__PTC8                                       0x0020 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC8__TRACE_D7                                   0x0020 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC8__FXIO1_D4                                   0x0020 0x0214 0x2 0x1
+#define IMX7ULP_PAD_PTC8__LPSPI2_SIN                                 0x0020 0x02b0 0x3 0x1
+#define IMX7ULP_PAD_PTC8__LPUART6_CTS_B                              0x0020 0x025c 0x4 0x1
+#define IMX7ULP_PAD_PTC8__LPI2C6_SCL                                 0x0020 0x02fc 0x5 0x1
+#define IMX7ULP_PAD_PTC8__TPM5_CLKIN                                 0x0020 0x02cc 0x6 0x1
+#define IMX7ULP_PAD_PTC8__FB_AD8                                     0x0020 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC9__PTC9                                       0x0024 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC9__TRACE_D6                                   0x0024 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC9__FXIO1_D5                                   0x0024 0x0218 0x2 0x1
+#define IMX7ULP_PAD_PTC9__LPSPI2_SOUT                                0x0024 0x02b4 0x3 0x1
+#define IMX7ULP_PAD_PTC9__LPUART6_RTS_B                              0x0024 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC9__LPI2C6_SDA                                 0x0024 0x0300 0x5 0x1
+#define IMX7ULP_PAD_PTC9__TPM5_CH0                                   0x0024 0x02c4 0x6 0x1
+#define IMX7ULP_PAD_PTC9__FB_AD9                                     0x0024 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC10__PTC10                                     0x0028 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC10__TRACE_D5                                  0x0028 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC10__FXIO1_D6                                  0x0028 0x021c 0x2 0x1
+#define IMX7ULP_PAD_PTC10__LPSPI2_SCK                                0x0028 0x02ac 0x3 0x1
+#define IMX7ULP_PAD_PTC10__LPUART6_TX                                0x0028 0x0264 0x4 0x1
+#define IMX7ULP_PAD_PTC10__LPI2C6_HREQ                               0x0028 0x02f8 0x5 0x1
+#define IMX7ULP_PAD_PTC10__TPM7_CH3                                  0x0028 0x02e8 0x6 0x1
+#define IMX7ULP_PAD_PTC10__FB_AD10                                   0x0028 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC11__PTC11                                     0x002c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC11__TRACE_D4                                  0x002c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC11__FXIO1_D7                                  0x002c 0x0220 0x2 0x1
+#define IMX7ULP_PAD_PTC11__LPSPI2_PCS0                               0x002c 0x029c 0x3 0x1
+#define IMX7ULP_PAD_PTC11__LPUART6_RX                                0x002c 0x0260 0x4 0x1
+#define IMX7ULP_PAD_PTC11__TPM7_CH4                                  0x002c 0x02ec 0x6 0x1
+#define IMX7ULP_PAD_PTC11__FB_AD11                                   0x002c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC12__PTC12                                     0x0030 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC12__TRACE_D3                                  0x0030 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC12__FXIO1_D8                                  0x0030 0x0224 0x2 0x1
+#define IMX7ULP_PAD_PTC12__LPSPI3_PCS1                               0x0030 0x0314 0x3 0x1
+#define IMX7ULP_PAD_PTC12__LPUART7_CTS_B                             0x0030 0x0268 0x4 0x1
+#define IMX7ULP_PAD_PTC12__LPI2C7_SCL                                0x0030 0x0308 0x5 0x1
+#define IMX7ULP_PAD_PTC12__TPM7_CH5                                  0x0030 0x02f0 0x6 0x1
+#define IMX7ULP_PAD_PTC12__FB_AD12                                   0x0030 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__PTC13                                     0x0034 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC13__TRACE_D2                                  0x0034 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC13__FXIO1_D9                                  0x0034 0x0228 0x2 0x1
+#define IMX7ULP_PAD_PTC13__LPSPI3_PCS2                               0x0034 0x0318 0x3 0x1
+#define IMX7ULP_PAD_PTC13__LPUART7_RTS_B                             0x0034 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTC13__LPI2C7_SDA                                0x0034 0x030c 0x5 0x1
+#define IMX7ULP_PAD_PTC13__TPM7_CLKIN                                0x0034 0x02f4 0x6 0x1
+#define IMX7ULP_PAD_PTC13__FB_AD13                                   0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID                                   0x0034 0x0338 0xb 0x1
+#define IMX7ULP_PAD_PTC14__PTC14                                     0x0038 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC14__TRACE_D1                                  0x0038 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC14__FXIO1_D10                                 0x0038 0x022c 0x2 0x1
+#define IMX7ULP_PAD_PTC14__LPSPI3_PCS3                               0x0038 0x031c 0x3 0x1
+#define IMX7ULP_PAD_PTC14__LPUART7_TX                                0x0038 0x0270 0x4 0x1
+#define IMX7ULP_PAD_PTC14__LPI2C7_HREQ                               0x0038 0x0304 0x5 0x1
+#define IMX7ULP_PAD_PTC14__TPM7_CH0                                  0x0038 0x02dc 0x6 0x1
+#define IMX7ULP_PAD_PTC14__FB_AD14                                   0x0038 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC15__PTC15                                     0x003c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC15__TRACE_D0                                  0x003c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC15__FXIO1_D11                                 0x003c 0x0230 0x2 0x1
+#define IMX7ULP_PAD_PTC15__LPUART7_RX                                0x003c 0x026c 0x4 0x1
+#define IMX7ULP_PAD_PTC15__TPM7_CH1                                  0x003c 0x02e0 0x6 0x1
+#define IMX7ULP_PAD_PTC15__FB_AD15                                   0x003c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__PTC16                                     0x0040 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC16__TRACE_CLKOUT                              0x0040 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTC16__FXIO1_D12                                 0x0040 0x0234 0x2 0x1
+#define IMX7ULP_PAD_PTC16__LPSPI3_SIN                                0x0040 0x0324 0x3 0x1
+#define IMX7ULP_PAD_PTC16__TPM7_CH2                                  0x0040 0x02e4 0x6 0x1
+#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B                   0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2                                  0x0040 0x0334 0xb 0x1
+#define IMX7ULP_PAD_PTC17__PTC17                                     0x0044 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC17__FXIO1_D13                                 0x0044 0x0238 0x2 0x1
+#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT                               0x0044 0x0328 0x3 0x1
+#define IMX7ULP_PAD_PTC17__TPM6_CLKIN                                0x0044 0x02d8 0x6 0x1
+#define IMX7ULP_PAD_PTC17__FB_CS0_B                                  0x0044 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__PTC18                                     0x0048 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC18__FXIO1_D14                                 0x0048 0x023c 0x2 0x1
+#define IMX7ULP_PAD_PTC18__LPSPI3_SCK                                0x0048 0x0320 0x3 0x1
+#define IMX7ULP_PAD_PTC18__TPM6_CH0                                  0x0048 0x02d0 0x6 0x1
+#define IMX7ULP_PAD_PTC18__FB_OE_B                                   0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID                                   0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE                                    0x0048 0x033c 0xc 0x1
+#define IMX7ULP_PAD_PTC19__PTC19                                     0x004c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTC19__FXIO1_D15                                 0x004c 0x0240 0x2 0x1
+#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0                               0x004c 0x0310 0x3 0x1
+#define IMX7ULP_PAD_PTC19__TPM6_CH1                                  0x004c 0x02d4 0x6 0x1
+#define IMX7ULP_PAD_PTC19__FB_A16                                    0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID                                   0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2                                 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE                                    0x004c 0x033c 0xc 0x3
+#define IMX7ULP_PAD_PTD0__PTD0                                       0x0080 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B                              0x0080 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD1__PTD1                                       0x0084 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD1__SDHC0_CMD                                  0x0084 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD2__PTD2                                       0x0088 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD2__SDHC0_CLK                                  0x0088 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD3__PTD3                                       0x008c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD3__SDHC0_D7                                   0x008c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD4__PTD4                                       0x0090 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD4__SDHC0_D6                                   0x0090 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD5__PTD5                                       0x0094 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD5__SDHC0_D5                                   0x0094 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD6__PTD6                                       0x0098 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD6__SDHC0_D4                                   0x0098 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD7__PTD7                                       0x009c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD7__SDHC0_D3                                   0x009c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD8__PTD8                                       0x00a0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD8__TPM4_CLKIN                                 0x00a0 0x0298 0x6 0x2
+#define IMX7ULP_PAD_PTD8__SDHC0_D2                                   0x00a0 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD9__PTD9                                       0x00a4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD9__TPM4_CH0                                   0x00a4 0x0280 0x6 0x2
+#define IMX7ULP_PAD_PTD9__SDHC0_D1                                   0x00a4 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD10__PTD10                                     0x00a8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD10__TPM4_CH1                                  0x00a8 0x0284 0x6 0x2
+#define IMX7ULP_PAD_PTD10__SDHC0_D0                                  0x00a8 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTD11__PTD11                                     0x00ac 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTD11__TPM4_CH2                                  0x00ac 0x0288 0x6 0x2
+#define IMX7ULP_PAD_PTD11__SDHC0_DQS                                 0x00ac 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__PTE0                                       0x0100 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE0__FXIO1_D31                                  0x0100 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE0__LPSPI2_PCS1                                0x0100 0x02a0 0x3 0x2
+#define IMX7ULP_PAD_PTE0__LPUART4_CTS_B                              0x0100 0x0244 0x4 0x2
+#define IMX7ULP_PAD_PTE0__LPI2C4_SCL                                 0x0100 0x0278 0x5 0x2
+#define IMX7ULP_PAD_PTE0__SDHC1_D1                                   0x0100 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE0__FB_A25                                     0x0100 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE1__PTE1                                       0x0104 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE1__FXIO1_D30                                  0x0104 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE1__LPSPI2_PCS2                                0x0104 0x02a4 0x3 0x2
+#define IMX7ULP_PAD_PTE1__LPUART4_RTS_B                              0x0104 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE1__LPI2C4_SDA                                 0x0104 0x027c 0x5 0x2
+#define IMX7ULP_PAD_PTE1__SDHC1_D0                                   0x0104 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE1__FB_A26                                     0x0104 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE2__PTE2                                       0x0108 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE2__FXIO1_D29                                  0x0108 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE2__LPSPI2_PCS3                                0x0108 0x02a8 0x3 0x2
+#define IMX7ULP_PAD_PTE2__LPUART4_TX                                 0x0108 0x024c 0x4 0x2
+#define IMX7ULP_PAD_PTE2__LPI2C4_HREQ                                0x0108 0x0274 0x5 0x2
+#define IMX7ULP_PAD_PTE2__SDHC1_CLK                                  0x0108 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE3__PTE3                                       0x010c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE3__FXIO1_D28                                  0x010c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE3__LPUART4_RX                                 0x010c 0x0248 0x4 0x2
+#define IMX7ULP_PAD_PTE3__TPM5_CH1                                   0x010c 0x02c8 0x6 0x2
+#define IMX7ULP_PAD_PTE3__SDHC1_CMD                                  0x010c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE4__PTE4                                       0x0110 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE4__FXIO1_D27                                  0x0110 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE4__LPSPI2_SIN                                 0x0110 0x02b0 0x3 0x2
+#define IMX7ULP_PAD_PTE4__LPUART5_CTS_B                              0x0110 0x0250 0x4 0x2
+#define IMX7ULP_PAD_PTE4__LPI2C5_SCL                                 0x0110 0x02bc 0x5 0x2
+#define IMX7ULP_PAD_PTE4__TPM5_CLKIN                                 0x0110 0x02cc 0x6 0x2
+#define IMX7ULP_PAD_PTE4__SDHC1_D3                                   0x0110 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__PTE5                                       0x0114 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE5__FXIO1_D26                                  0x0114 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE5__LPSPI2_SOUT                                0x0114 0x02b4 0x3 0x2
+#define IMX7ULP_PAD_PTE5__LPUART5_RTS_B                              0x0114 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE5__LPI2C5_SDA                                 0x0114 0x02c0 0x5 0x2
+#define IMX7ULP_PAD_PTE5__TPM5_CH0                                   0x0114 0x02c4 0x6 0x2
+#define IMX7ULP_PAD_PTE5__SDHC1_D2                                   0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE                                     0x0114 0x033c 0xc 0x2
+#define IMX7ULP_PAD_PTE6__PTE6                                       0x0118 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE6__FXIO1_D25                                  0x0118 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE6__LPSPI2_SCK                                 0x0118 0x02ac 0x3 0x2
+#define IMX7ULP_PAD_PTE6__LPUART5_TX                                 0x0118 0x0258 0x4 0x2
+#define IMX7ULP_PAD_PTE6__LPI2C5_HREQ                                0x0118 0x02b8 0x5 0x2
+#define IMX7ULP_PAD_PTE6__TPM7_CH3                                   0x0118 0x02e8 0x6 0x2
+#define IMX7ULP_PAD_PTE6__SDHC1_D4                                   0x0118 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE6__FB_A17                                     0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC                                    0x0118 0x0330 0xb 0x1
+#define IMX7ULP_PAD_PTE7__PTE7                                       0x011c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE7__TRACE_D7                                   0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR                                   0x011c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE7__VIU_FID                                    0x011c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE7__FXIO1_D24                                  0x011c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0                                0x011c 0x029c 0x3 0x2
+#define IMX7ULP_PAD_PTE7__LPUART5_RX                                 0x011c 0x0254 0x4 0x2
+#define IMX7ULP_PAD_PTE7__TPM7_CH4                                   0x011c 0x02ec 0x6 0x2
+#define IMX7ULP_PAD_PTE7__SDHC1_D5                                   0x011c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE7__FB_A18                                     0x011c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE8__PTE8                                       0x0120 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE8__TRACE_D6                                   0x0120 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE8__VIU_D16                                    0x0120 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE8__FXIO1_D23                                  0x0120 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE8__LPSPI3_PCS1                                0x0120 0x0314 0x3 0x2
+#define IMX7ULP_PAD_PTE8__LPUART6_CTS_B                              0x0120 0x025c 0x4 0x2
+#define IMX7ULP_PAD_PTE8__LPI2C6_SCL                                 0x0120 0x02fc 0x5 0x2
+#define IMX7ULP_PAD_PTE8__TPM7_CH5                                   0x0120 0x02f0 0x6 0x2
+#define IMX7ULP_PAD_PTE8__SDHC1_WP                                   0x0120 0x0200 0x7 0x1
+#define IMX7ULP_PAD_PTE8__SDHC1_D6                                   0x0120 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE8__FB_CS3_B_FB_BE7_0_BLS31_24_B               0x0120 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE9__PTE9                                       0x0124 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE9__TRACE_D5                                   0x0124 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE9__VIU_D17                                    0x0124 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE9__FXIO1_D22                                  0x0124 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE9__LPSPI3_PCS2                                0x0124 0x0318 0x3 0x2
+#define IMX7ULP_PAD_PTE9__LPUART6_RTS_B                              0x0124 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE9__LPI2C6_SDA                                 0x0124 0x0300 0x5 0x2
+#define IMX7ULP_PAD_PTE9__TPM7_CLKIN                                 0x0124 0x02f4 0x6 0x2
+#define IMX7ULP_PAD_PTE9__SDHC1_CD                                   0x0124 0x032c 0x7 0x1
+#define IMX7ULP_PAD_PTE9__SDHC1_D7                                   0x0124 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE9__FB_TBST_B_FB_CS2_B_FB_BE15_8_BLS23_16_B    0x0124 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE10__PTE10                                     0x0128 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE10__TRACE_D4                                  0x0128 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE10__VIU_D18                                   0x0128 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE10__FXIO1_D21                                 0x0128 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE10__LPSPI3_PCS3                               0x0128 0x031c 0x3 0x2
+#define IMX7ULP_PAD_PTE10__LPUART6_TX                                0x0128 0x0264 0x4 0x2
+#define IMX7ULP_PAD_PTE10__LPI2C6_HREQ                               0x0128 0x02f8 0x5 0x2
+#define IMX7ULP_PAD_PTE10__TPM7_CH0                                  0x0128 0x02dc 0x6 0x2
+#define IMX7ULP_PAD_PTE10__SDHC1_VS                                  0x0128 0x0000 0x7 0x0
+#define IMX7ULP_PAD_PTE10__SDHC1_DQS                                 0x0128 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE10__FB_A19                                    0x0128 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE11__PTE11                                     0x012c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE11__TRACE_D3                                  0x012c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE11__VIU_D19                                   0x012c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE11__FXIO1_D20                                 0x012c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE11__LPUART6_RX                                0x012c 0x0260 0x4 0x2
+#define IMX7ULP_PAD_PTE11__TPM7_CH1                                  0x012c 0x02e0 0x6 0x2
+#define IMX7ULP_PAD_PTE11__SDHC1_RESET_B                             0x012c 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE11__FB_A20                                    0x012c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE12__PTE12                                     0x0130 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE12__TRACE_D2                                  0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2                                  0x0130 0x0334 0xb 0x2
+#define IMX7ULP_PAD_PTE12__VIU_D20                                   0x0130 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE12__FXIO1_D19                                 0x0130 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE12__LPSPI3_SIN                                0x0130 0x0324 0x3 0x2
+#define IMX7ULP_PAD_PTE12__LPUART7_CTS_B                             0x0130 0x0268 0x4 0x2
+#define IMX7ULP_PAD_PTE12__LPI2C7_SCL                                0x0130 0x0308 0x5 0x2
+#define IMX7ULP_PAD_PTE12__TPM7_CH2                                  0x0130 0x02e4 0x6 0x2
+#define IMX7ULP_PAD_PTE12__SDHC1_WP                                  0x0130 0x0200 0x8 0x2
+#define IMX7ULP_PAD_PTE12__FB_A21                                    0x0130 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE13__PTE13                                     0x0134 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE13__TRACE_D1                                  0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2                                 0x0134 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE13__VIU_D21                                   0x0134 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE13__FXIO1_D18                                 0x0134 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT                               0x0134 0x0328 0x3 0x2
+#define IMX7ULP_PAD_PTE13__LPUART7_RTS_B                             0x0134 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTE13__LPI2C7_SDA                                0x0134 0x030c 0x5 0x2
+#define IMX7ULP_PAD_PTE13__TPM6_CLKIN                                0x0134 0x02d8 0x6 0x2
+#define IMX7ULP_PAD_PTE13__SDHC1_CD                                  0x0134 0x032c 0x8 0x2
+#define IMX7ULP_PAD_PTE13__FB_A22                                    0x0134 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE14__PTE14                                     0x0138 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE14__TRACE_D0                                  0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC                                   0x0138 0x0330 0xb 0x2
+#define IMX7ULP_PAD_PTE14__VIU_D22                                   0x0138 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE14__FXIO1_D17                                 0x0138 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE14__LPSPI3_SCK                                0x0138 0x0320 0x3 0x2
+#define IMX7ULP_PAD_PTE14__LPUART7_TX                                0x0138 0x0270 0x4 0x2
+#define IMX7ULP_PAD_PTE14__LPI2C7_HREQ                               0x0138 0x0304 0x5 0x2
+#define IMX7ULP_PAD_PTE14__TPM6_CH0                                  0x0138 0x02d0 0x6 0x2
+#define IMX7ULP_PAD_PTE14__SDHC1_VS                                  0x0138 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE14__FB_A23                                    0x0138 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE15__PTE15                                     0x013c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT                              0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR                                  0x013c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTE15__VIU_D23                                   0x013c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTE15__FXIO1_D16                                 0x013c 0x0000 0x2 0x0
+#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0                               0x013c 0x0310 0x3 0x2
+#define IMX7ULP_PAD_PTE15__LPUART7_RX                                0x013c 0x026c 0x4 0x2
+#define IMX7ULP_PAD_PTE15__TPM6_CH1                                  0x013c 0x02d4 0x6 0x2
+#define IMX7ULP_PAD_PTE15__FB_A24                                    0x013c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF0__PTF0                                       0x0180 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE                                     0x0180 0x033c 0xc 0x0
+#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B                              0x0180 0x0244 0x4 0x3
+#define IMX7ULP_PAD_PTF0__LPI2C4_SCL                                 0x0180 0x0278 0x5 0x3
+#define IMX7ULP_PAD_PTF0__TPM4_CLKIN                                 0x0180 0x0298 0x6 0x3
+#define IMX7ULP_PAD_PTF0__FB_RW_B                                    0x0180 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF1__PTF1                                       0x0184 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF1__VIU_HSYNC                                  0x0184 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF1__LPUART4_RTS_B                              0x0184 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF1__LPI2C4_SDA                                 0x0184 0x027c 0x5 0x3
+#define IMX7ULP_PAD_PTF1__TPM4_CH0                                   0x0184 0x0280 0x6 0x3
+#define IMX7ULP_PAD_PTF1__CLKOUT                                     0x0184 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF2__PTF2                                       0x0188 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF2__VIU_VSYNC                                  0x0188 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF2__LPUART4_TX                                 0x0188 0x024c 0x4 0x3
+#define IMX7ULP_PAD_PTF2__LPI2C4_HREQ                                0x0188 0x0274 0x5 0x3
+#define IMX7ULP_PAD_PTF2__TPM4_CH1                                   0x0188 0x0284 0x6 0x3
+#define IMX7ULP_PAD_PTF2__FB_TSIZ1_FB_CS5_B_FB_BE23_16_BLS15_8_B     0x0188 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF3__PTF3                                       0x018c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF3__VIU_PCLK                                   0x018c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF3__LPUART4_RX                                 0x018c 0x0248 0x4 0x3
+#define IMX7ULP_PAD_PTF3__TPM4_CH2                                   0x018c 0x0288 0x6 0x3
+#define IMX7ULP_PAD_PTF3__FB_AD16                                    0x018c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF4__PTF4                                       0x0190 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF4__VIU_D0                                     0x0190 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF4__FXIO1_D0                                   0x0190 0x0204 0x2 0x2
+#define IMX7ULP_PAD_PTF4__LPSPI2_PCS1                                0x0190 0x02a0 0x3 0x3
+#define IMX7ULP_PAD_PTF4__LPUART5_CTS_B                              0x0190 0x0250 0x4 0x3
+#define IMX7ULP_PAD_PTF4__LPI2C5_SCL                                 0x0190 0x02bc 0x5 0x3
+#define IMX7ULP_PAD_PTF4__TPM4_CH3                                   0x0190 0x028c 0x6 0x2
+#define IMX7ULP_PAD_PTF4__FB_AD17                                    0x0190 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF5__PTF5                                       0x0194 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF5__VIU_D1                                     0x0194 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF5__FXIO1_D1                                   0x0194 0x0208 0x2 0x2
+#define IMX7ULP_PAD_PTF5__LPSPI2_PCS2                                0x0194 0x02a4 0x3 0x3
+#define IMX7ULP_PAD_PTF5__LPUART5_RTS_B                              0x0194 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF5__LPI2C5_SDA                                 0x0194 0x02c0 0x5 0x3
+#define IMX7ULP_PAD_PTF5__TPM4_CH4                                   0x0194 0x0290 0x6 0x2
+#define IMX7ULP_PAD_PTF5__FB_AD18                                    0x0194 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF6__PTF6                                       0x0198 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF6__VIU_D2                                     0x0198 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF6__FXIO1_D2                                   0x0198 0x020c 0x2 0x2
+#define IMX7ULP_PAD_PTF6__LPSPI2_PCS3                                0x0198 0x02a8 0x3 0x3
+#define IMX7ULP_PAD_PTF6__LPUART5_TX                                 0x0198 0x0258 0x4 0x3
+#define IMX7ULP_PAD_PTF6__LPI2C5_HREQ                                0x0198 0x02b8 0x5 0x3
+#define IMX7ULP_PAD_PTF6__TPM4_CH5                                   0x0198 0x0294 0x6 0x2
+#define IMX7ULP_PAD_PTF6__FB_AD19                                    0x0198 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF7__PTF7                                       0x019c 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF7__VIU_D3                                     0x019c 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF7__FXIO1_D3                                   0x019c 0x0210 0x2 0x2
+#define IMX7ULP_PAD_PTF7__LPUART5_RX                                 0x019c 0x0254 0x4 0x3
+#define IMX7ULP_PAD_PTF7__TPM5_CH1                                   0x019c 0x02c8 0x6 0x3
+#define IMX7ULP_PAD_PTF7__FB_AD20                                    0x019c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF8__PTF8                                       0x01a0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF8__USB1_ULPI_CLK                              0x01a0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF8__VIU_D4                                     0x01a0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF8__FXIO1_D4                                   0x01a0 0x0214 0x2 0x2
+#define IMX7ULP_PAD_PTF8__LPSPI2_SIN                                 0x01a0 0x02b0 0x3 0x3
+#define IMX7ULP_PAD_PTF8__LPUART6_CTS_B                              0x01a0 0x025c 0x4 0x3
+#define IMX7ULP_PAD_PTF8__LPI2C6_SCL                                 0x01a0 0x02fc 0x5 0x3
+#define IMX7ULP_PAD_PTF8__TPM5_CLKIN                                 0x01a0 0x02cc 0x6 0x3
+#define IMX7ULP_PAD_PTF8__FB_AD21                                    0x01a0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF9__PTF9                                       0x01a4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF9__USB1_ULPI_NXT                              0x01a4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF9__VIU_D5                                     0x01a4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF9__FXIO1_D5                                   0x01a4 0x0218 0x2 0x2
+#define IMX7ULP_PAD_PTF9__LPSPI2_SOUT                                0x01a4 0x02b4 0x3 0x3
+#define IMX7ULP_PAD_PTF9__LPUART6_RTS_B                              0x01a4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF9__LPI2C6_SDA                                 0x01a4 0x0300 0x5 0x3
+#define IMX7ULP_PAD_PTF9__TPM5_CH0                                   0x01a4 0x02c4 0x6 0x3
+#define IMX7ULP_PAD_PTF9__FB_AD22                                    0x01a4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF10__PTF10                                     0x01a8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF10__USB1_ULPI_STP                             0x01a8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF10__VIU_D6                                    0x01a8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF10__FXIO1_D6                                  0x01a8 0x021c 0x2 0x2
+#define IMX7ULP_PAD_PTF10__LPSPI2_SCK                                0x01a8 0x02ac 0x3 0x3
+#define IMX7ULP_PAD_PTF10__LPUART6_TX                                0x01a8 0x0264 0x4 0x3
+#define IMX7ULP_PAD_PTF10__LPI2C6_HREQ                               0x01a8 0x02f8 0x5 0x3
+#define IMX7ULP_PAD_PTF10__TPM7_CH3                                  0x01a8 0x02e8 0x6 0x3
+#define IMX7ULP_PAD_PTF10__FB_AD23                                   0x01a8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF11__PTF11                                     0x01ac 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF11__USB1_ULPI_DIR                             0x01ac 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF11__VIU_D7                                    0x01ac 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF11__FXIO1_D7                                  0x01ac 0x0220 0x2 0x2
+#define IMX7ULP_PAD_PTF11__LPSPI2_PCS0                               0x01ac 0x029c 0x3 0x3
+#define IMX7ULP_PAD_PTF11__LPUART6_RX                                0x01ac 0x0260 0x4 0x3
+#define IMX7ULP_PAD_PTF11__TPM7_CH4                                  0x01ac 0x02ec 0x6 0x3
+#define IMX7ULP_PAD_PTF11__FB_CS4_B_FB_TSIZ0_FB_BE31_24_BLS7_0_B     0x01ac 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF12__PTF12                                     0x01b0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF12__USB1_ULPI_DATA0                           0x01b0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF12__VIU_D8                                    0x01b0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF12__FXIO1_D8                                  0x01b0 0x0224 0x2 0x2
+#define IMX7ULP_PAD_PTF12__LPSPI3_PCS1                               0x01b0 0x0314 0x3 0x3
+#define IMX7ULP_PAD_PTF12__LPUART7_CTS_B                             0x01b0 0x0268 0x4 0x3
+#define IMX7ULP_PAD_PTF12__LPI2C7_SCL                                0x01b0 0x0308 0x5 0x3
+#define IMX7ULP_PAD_PTF12__TPM7_CH5                                  0x01b0 0x02f0 0x6 0x3
+#define IMX7ULP_PAD_PTF12__FB_AD24                                   0x01b0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF13__PTF13                                     0x01b4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF13__USB1_ULPI_DATA1                           0x01b4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF13__VIU_D9                                    0x01b4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF13__FXIO1_D9                                  0x01b4 0x0228 0x2 0x2
+#define IMX7ULP_PAD_PTF13__LPSPI3_PCS2                               0x01b4 0x0318 0x3 0x3
+#define IMX7ULP_PAD_PTF13__LPUART7_RTS_B                             0x01b4 0x0000 0x4 0x0
+#define IMX7ULP_PAD_PTF13__LPI2C7_SDA                                0x01b4 0x030c 0x5 0x3
+#define IMX7ULP_PAD_PTF13__TPM7_CLKIN                                0x01b4 0x02f4 0x6 0x3
+#define IMX7ULP_PAD_PTF13__FB_AD25                                   0x01b4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF14__PTF14                                     0x01b8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF14__USB1_ULPI_DATA2                           0x01b8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF14__VIU_D10                                   0x01b8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF14__FXIO1_D10                                 0x01b8 0x022c 0x2 0x2
+#define IMX7ULP_PAD_PTF14__LPSPI3_PCS3                               0x01b8 0x031c 0x3 0x3
+#define IMX7ULP_PAD_PTF14__LPUART7_TX                                0x01b8 0x0270 0x4 0x3
+#define IMX7ULP_PAD_PTF14__LPI2C7_HREQ                               0x01b8 0x0304 0x5 0x3
+#define IMX7ULP_PAD_PTF14__TPM7_CH0                                  0x01b8 0x02dc 0x6 0x3
+#define IMX7ULP_PAD_PTF14__FB_AD26                                   0x01b8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF15__PTF15                                     0x01bc 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF15__USB1_ULPI_DATA3                           0x01bc 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF15__VIU_D11                                   0x01bc 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF15__FXIO1_D11                                 0x01bc 0x0230 0x2 0x2
+#define IMX7ULP_PAD_PTF15__LPUART7_RX                                0x01bc 0x026c 0x4 0x3
+#define IMX7ULP_PAD_PTF15__TPM7_CH1                                  0x01bc 0x02e0 0x6 0x3
+#define IMX7ULP_PAD_PTF15__FB_AD27                                   0x01bc 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF16__PTF16                                     0x01c0 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF16__USB1_ULPI_DATA4                           0x01c0 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF16__VIU_D12                                   0x01c0 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF16__FXIO1_D12                                 0x01c0 0x0234 0x2 0x2
+#define IMX7ULP_PAD_PTF16__LPSPI3_SIN                                0x01c0 0x0324 0x3 0x3
+#define IMX7ULP_PAD_PTF16__TPM7_CH2                                  0x01c0 0x02e4 0x6 0x3
+#define IMX7ULP_PAD_PTF16__FB_AD28                                   0x01c0 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF17__PTF17                                     0x01c4 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF17__USB1_ULPI_DATA5                           0x01c4 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF17__VIU_D13                                   0x01c4 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF17__FXIO1_D13                                 0x01c4 0x0238 0x2 0x2
+#define IMX7ULP_PAD_PTF17__LPSPI3_SOUT                               0x01c4 0x0328 0x3 0x3
+#define IMX7ULP_PAD_PTF17__TPM6_CLKIN                                0x01c4 0x02d8 0x6 0x3
+#define IMX7ULP_PAD_PTF17__FB_AD29                                   0x01c4 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF18__PTF18                                     0x01c8 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF18__USB1_ULPI_DATA6                           0x01c8 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF18__VIU_D14                                   0x01c8 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF18__FXIO1_D14                                 0x01c8 0x023c 0x2 0x2
+#define IMX7ULP_PAD_PTF18__LPSPI3_SCK                                0x01c8 0x0320 0x3 0x3
+#define IMX7ULP_PAD_PTF18__TPM6_CH0                                  0x01c8 0x02d0 0x6 0x3
+#define IMX7ULP_PAD_PTF18__FB_AD30                                   0x01c8 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTF19__PTF19                                     0x01cc 0x0000 0x1 0x0
+#define IMX7ULP_PAD_PTF19__USB1_ULPI_DATA7                           0x01cc 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTF19__VIU_D15                                   0x01cc 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF19__FXIO1_D15                                 0x01cc 0x0240 0x2 0x2
+#define IMX7ULP_PAD_PTF19__LPSPI3_PCS0                               0x01cc 0x0310 0x3 0x3
+#define IMX7ULP_PAD_PTF19__TPM6_CH1                                  0x01cc 0x02d4 0x6 0x3
+#define IMX7ULP_PAD_PTF19__FB_AD31                                   0x01cc 0x0000 0x9 0x0
+
+#endif /* __DTS_IMX7ULP_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
new file mode 100644
index 000000000..bcec98b96
--- /dev/null
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "imx7ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio_ptc;
+		gpio1 = &gpio_ptd;
+		gpio2 = &gpio_pte;
+		gpio3 = &gpio_ptf;
+		i2c0 = &lpi2c6;
+		i2c1 = &lpi2c7;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+		usbphy0 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+	};
+
+	intc: interrupt-controller@40021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x40021000 0x1000>,
+		      <0x40022000 0x1000>;
+	};
+
+	rosc: clock-rosc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "rosc";
+		#clock-cells = <0>;
+	};
+
+	sosc: clock-sosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "sosc";
+		#clock-cells = <0>;
+	};
+
+	sirc: clock-sirc {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-output-names = "sirc";
+		#clock-cells = <0>;
+	};
+
+	firc: clock-firc {
+		compatible = "fixed-clock";
+		clock-frequency = <48000000>;
+		clock-output-names = "firc";
+		#clock-cells = <0>;
+	};
+
+	upll: clock-upll {
+		compatible = "fixed-clock";
+		clock-frequency = <480000000>;
+		clock-output-names = "upll";
+		#clock-cells = <0>;
+	};
+
+	ahbbridge0: bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40000000 0x800000>;
+		ranges;
+
+		edma1: dma-controller@40080000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x40080000 0x2000>,
+				<0x40210000 0x1000>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+				 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+		};
+
+		crypto: crypto@40240000 {
+			compatible = "fsl,sec-v4.0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40240000 0x10000>;
+			ranges = <0 0x40240000 0x10000>;
+			clocks = <&pcc2 IMX7ULP_CLK_CAAM>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "aclk", "ipg";
+
+			sec_jr0: jr@1000 {
+				compatible = "fsl,sec-v4.0-job-ring";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@2000 {
+				compatible = "fsl,sec-v4.0-job-ring";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		lpuart4: serial@402d0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402d0000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+			assigned-clock-rates = <24000000>;
+			status = "disabled";
+		};
+
+		lpuart5: serial@402e0000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x402e0000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		tpm4: pwm@40250000 {
+			compatible = "fsl,imx7ulp-pwm";
+			reg = <0x40250000 0x1000>;
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+			clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		tpm5: tpm@40260000 {
+			compatible = "fsl,imx7ulp-tpm";
+			reg = <0x40260000 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+			clock-names = "ipg", "per";
+		};
+
+		usbotg1: usb@40330000 {
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			reg = <0x40330000 0x200>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+			phys = <&usbphy1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			ahb-burst-config = <0x0>;
+			tx-burst-size-dword = <0x8>;
+			rx-burst-size-dword = <0x8>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@40330200 {
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			#index-cells = <1>;
+			reg = <0x40330200 0x200>;
+		};
+
+		usbphy1: usb-phy@40350000 {
+			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+			reg = <0x40350000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+			#phy-cells = <0>;
+		};
+
+		usdhc0: mmc@40370000 {
+			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			reg = <0x40370000 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&pcc2 IMX7ULP_CLK_USDHC0>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		usdhc1: mmc@40380000 {
+			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			reg = <0x40380000 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&pcc2 IMX7ULP_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		scg1: clock-controller@403e0000 {
+			compatible = "fsl,imx7ulp-scg1";
+			reg = <0x403e0000 0x10000>;
+			clocks = <&rosc>, <&sosc>, <&sirc>,
+				 <&firc>, <&upll>;
+			clock-names = "rosc", "sosc", "sirc",
+				      "firc", "upll";
+			#clock-cells = <1>;
+		};
+
+		wdog1: watchdog@403d0000 {
+			compatible = "fsl,imx7ulp-wdt";
+			reg = <0x403d0000 0x10000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			timeout-sec = <40>;
+		};
+
+		pcc2: clock-controller@403f0000 {
+			compatible = "fsl,imx7ulp-pcc2";
+			reg = <0x403f0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+				 <&scg1 IMX7ULP_CLK_UPLL>,
+				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_ROSC>,
+				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
+				      "upll", "sosc_bus_clk",
+				      "firc_bus_clk", "rosc", "spll_bus_clk";
+			assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+		};
+
+		smc1: clock-controller@40410000 {
+			compatible = "fsl,imx7ulp-smc1";
+			reg = <0x40410000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>,
+				 <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>;
+			clock-names = "divcore", "hsrun_divcore";
+		};
+
+		pcc3: clock-controller@40b30000 {
+			compatible = "fsl,imx7ulp-pcc3";
+			reg = <0x40b30000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+				 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+				 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+				 <&scg1 IMX7ULP_CLK_UPLL>,
+				 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+				 <&scg1 IMX7ULP_CLK_ROSC>,
+				 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+			clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+				      "apll_pfd2", "apll_pfd1", "apll_pfd0",
+				      "upll", "sosc_bus_clk",
+				      "firc_bus_clk", "rosc", "spll_bus_clk";
+		};
+	};
+
+	ahbbridge1: bus@40800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x40800000 0x800000>;
+		ranges;
+
+		lpi2c6: i2c@40a40000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40a40000 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpi2c7: i2c@40a50000 {
+			compatible = "fsl,imx7ulp-lpi2c";
+			reg = <0x40a50000 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart6: serial@40a60000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40a60000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		lpuart7: serial@40a70000 {
+			compatible = "fsl,imx7ulp-lpuart";
+			reg = <0x40a70000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pcc3  IMX7ULP_CLK_LPUART7>;
+			clock-names = "ipg";
+			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
+			assigned-clock-rates = <48000000>;
+			status = "disabled";
+		};
+
+		memory-controller@40ab0000 {
+			compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc";
+			reg = <0x40ab0000 0x1000>;
+			clocks = <&pcc3 IMX7ULP_CLK_MMDC>;
+		};
+
+		iomuxc1: pinctrl@40ac0000 {
+			compatible = "fsl,imx7ulp-iomuxc1";
+			reg = <0x40ac0000 0x1000>;
+		};
+
+		gpio_ptc: gpio@40ae0000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40ae0000 0x1000 0x400f0000 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLC>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 0 20>;
+		};
+
+		gpio_ptd: gpio@40af0000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40af0000 0x1000 0x400f0040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLD>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 32 12>;
+		};
+
+		gpio_pte: gpio@40b00000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40b00000 0x1000 0x400f0080 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 64 16>;
+		};
+
+		gpio_ptf: gpio@40b10000 {
+			compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
+			reg = <0x40b10000 0x1000 0x400f00c0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
+				 <&pcc3 IMX7ULP_CLK_PCTLF>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 96 20>;
+		};
+	};
+
+	m4aips1: bus@41080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x41080000 0x80000>;
+		ranges;
+
+		sim: sim@410a3000 {
+			compatible = "fsl,imx7ulp-sim", "syscon";
+			reg = <0x410a3000 0x1000>;
+		};
+
+		ocotp: efuse@410a6000 {
+			compatible = "fsl,imx7ulp-ocotp", "syscon";
+			reg = <0x410a6000 0x4000>;
+			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
new file mode 100644
index 000000000..602f74d2c
--- /dev/null
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+
+		/* Use core module LED to indicate CPU load */
+		led@c.0 {
+			compatible = "register-bit-led";
+			offset = <0x0c>;
+			mask = <0x01>;
+			label = "integrator:core_module";
+			linux,default-trigger = "cpu0";
+			default-state = "on";
+		};
+	};
+
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		uart@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		uart@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+
+		syscon {
+			/* Debug registers mapped as syscon */
+			compatible = "syscon", "simple-mfd";
+			reg = <0x1a000000 0x10>;
+
+			led@4.0 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x01>;
+				label = "integrator:green0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@4.1 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x02>;
+				label = "integrator:yellow";
+				default-state = "off";
+			};
+			led@4.2 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x04>;
+				label = "integrator:red";
+				default-state = "off";
+			};
+			led@4.3 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x08>;
+				label = "integrator:green1";
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
new file mode 100644
index 000000000..1412a1a96
--- /dev/null
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+
+		vco1: clock@00 {
+			compatible = "arm,impd1-vco1";
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock@04 {
+			compatible = "arm,impd1-vco2";
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock@1_4 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock@1_64 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	uart@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	uart@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	ssp@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "spiclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
new file mode 100644
index 000000000..8600c0548
--- /dev/null
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm926ej-s"; */
+			reg = <0>;
+			/*
+			 * The documentation in ARM DUI 0138E page 3-12 states
+			 * that the maximum frequency for this clock is 200 MHz
+			 * but painful trial-and-error has proved to me that it
+			 * is actually just hanging the system above 71 MHz.
+			 * Sad but true.
+			 */
+					 /* kHz     uV   */
+			operating-points = <71000  0
+					    66000  0
+					    60000  0
+					    48000  0
+					    36000  0
+					    24000  0
+					    12000  0>;
+			clocks = <&cmosc>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	/* 24 MHz chrystal on the Integrator/AP development board */
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon", "syscon";
+		reg = <0x11000000 0x100>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: apsys@24M {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: pciclk@24M {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	pci: pciv3@62000000 {
+		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		/* Bridge registers and config access space */
+		reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		clocks = <&pciclk>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+			0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+			0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+			0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+			0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+			0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+		dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+			0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+			0x02000000 0 0x80000000 /* Core module alias memory */
+			0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: uart@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: uart@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
new file mode 100644
index 000000000..01fa229e1
--- /dev/null
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			/*
+			 * Since the board has pluggable CPU modules, we
+			 * cannot define a proper compatible here. Let the
+			 * boot loader fill in the apropriate compatible
+			 * string if necessary.
+			 */
+			/* compatible = "arm,arm920t"; */
+			reg = <0>;
+			/*
+			 * TBD comment.
+			 */
+					 /* kHz     uV   */
+			operating-points = <50000  0
+					    48000  0>;
+			clocks = <&cmcore>;
+			clock-names = "cpu";
+			clock-latency = <1000000>; /* 1 ms */
+		};
+	};
+
+	/*
+	 * The Integrator/CP overall clocking architecture can be found in
+	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+	 * appear to illustrate the layout used in most configurations.
+	 */
+
+	/* The codec chrystal operates at 24.576 MHz */
+	xtal_codec: xtal24.576@24.576M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
+	aaci_bitclk: aaci_bitclk@12.288M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&xtal_codec>;
+	};
+
+	/* This is a 25MHz chrystal on the base board */
+	xtal25mhz: xtal25mhz@25M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	/* Actually sysclk I think */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+		kmiclk: kmiclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <3>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&cm24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-cp-syscon", "syscon";
+		reg = <0xcb000000 0x100>;
+	};
+
+	timer0: timer@13000000 {
+		/* TIMER0 runs directly on the 25MHz chrystal */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&xtal25mhz>;
+	};
+
+	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	/* The SIC is cascaded off IRQ 26 on the PIC */
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		interrupt-parent = <&pic>;
+		interrupts = <26>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+			clocks = <&auxosc>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+			max-memory-bandwidth = <40000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				clcd_pads_vga_dac: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
new file mode 100644
index 000000000..8fcd95805
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+	compatible = "linksys,nslu2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-status {
+			label = "nslu2:red:status";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-ready {
+			label = "nslu2:green:ready";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-disk-1 {
+			label = "nslu2:green:disk-1";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-disk-2 {
+			label = "nslu2:green:disk-2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6f {
+			compatible = "xicor,x1205";
+			reg = <0x6f>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	/* The first 16MB region on the expansion bus */
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 8 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x800000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x7e0000 */
+			fis-index-block = <0x3f>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
new file mode 100644
index 000000000..a9622ca85
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp42x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
new file mode 100644
index 000000000..ba1163a1e
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+	model = "Gateworks Cambria GW2358";
+	compatible = "gateworks,gw2358", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2358:green:LED";
+			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+		pld0: pld@56 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		/* This PLD just handles the LED and user button */
+		pld1: pld@57 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x57>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 32 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x2000000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x1fe0000 */
+			fis-index-block = <0xff>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
new file mode 100644
index 000000000..494fb2ff5
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
new file mode 100644
index 000000000..f8cd50665
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@c8011000 {
+			compatible = "intel,ixp4xx-i2c";
+			reg = <0xc8011000 0x18>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
new file mode 100644
index 000000000..d4a09584f
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		qmgr: queue-manager@60000000 {
+			compatible = "intel,ixp4xx-ahb-queue-manager";
+			reg = <0x60000000 0x4000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@c8000000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8000000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		gpio0: gpio@c8004000 {
+			compatible = "intel,ixp4xx-gpio";
+			reg = <0xc8004000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		intcon: interrupt-controller@c8003000 {
+			/*
+			 * Note: no compatible string. The subvariant of the
+			 * chip needs to define what version it is. The
+			 * location of the interrupt controller is fixed in
+			 * memory across all variants.
+			 */
+			reg = <0xc8003000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@c8005000 {
+			compatible = "intel,ixp4xx-timer";
+			reg = <0xc8005000 0x100>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		npe@c8006000 {
+			compatible = "intel,ixp4xx-network-processing-engine";
+			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
new file mode 100644
index 000000000..358f5477d
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		serial3 = &scifb1;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		power-supply = <&vcc_3v3_tft1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+		power-supply = <&vcc_3v3_tft1>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
+	reg_1p5v: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	vcc_3v3_tft1: regulator-panel {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc-3v3-tft1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		startup-delay-us = <500>;
+		gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&du {
+	status = "okay";
+};
+
+&gpio2 {
+	touch-interrupt {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p5v>;
+	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&vcc_3v3_tft1>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_d";
+		function = "can0";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pwm3_pins: pwm3 {
+		groups = "pwm3";
+		function = "pwm3";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scifb1_pins: scifb1 {
+		groups = "scifb1_data_d", "scifb1_ctrl";
+		function = "scifb1";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi1 &src3 &dvc1>;
+			capture = <&ssi0 &src2 &dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifb1 {
+	pinctrl-0 = <&scifb1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
new file mode 100644
index 000000000..e10f99278
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		serial1 = &scif1;
+		serial4 = &hscif1;
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&pfc {
+	can1_pins: can1 {
+		groups = "can1_data_d";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_c", "hscif1_ctrl_c";
+		function = "hscif1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
new file mode 100644
index 000000000..0397c3423
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclksys>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk@2310164 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	paclk13: paclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&papllclk>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "paclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb@2350008 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi@235000c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc@2350014 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clktetbtrc: clktetbtrc@2350018 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa@235001c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&paclk13>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac@2350020 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa@2350024 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie@2350028 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksr: clksr@2350034 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkgem0: clkgem0@235003c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkddr30: clkddr30@235005c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkwdtimer0: clkwdtimer0@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktimer15: clktimer15@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer15";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	/*
+	 * Below are set of fixed, input clocks definitions,
+	 * for which real frequencies have to be defined in board files.
+	 * Those clocks can be used as reference clocks for some HW modules
+	 * (as cpts, for example) by configuring corresponding clock muxes.
+	 */
+	timi0: timi0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "timi0";
+	};
+
+	timi1: timi1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "timi1";
+	};
+
+	tsrefclk: tsrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "tsrefclk";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
new file mode 100644
index 000000000..cf30e007f
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkusb1: clkusb1@2350004 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb1";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkhyperlink0: clkhyperlink0@2350030 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkpcie1: clkpcie1@235006c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie1";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkxge: clkxge@23500c8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	/*
+	 * Below are set of fixed, input clocks definitions,
+	 * for which real frequencies have to be defined in board files.
+	 * Those clocks can be used as reference clocks for some HW modules
+	 * (as cpts, for example) by configuring corresponding clock muxes.
+	 */
+	tsipclka: tsipclka {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "tsipclka";
+	};
+
+	tsipclkb: tsipclkb {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "tsipclkb";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
new file mode 100644
index 000000000..66fec5f5d
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison EVM device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2e.dtsi"
+
+/ {
+	compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+};
+
+&soc0 {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&keystone_usb0 {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&keystone_usb1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&dsp0 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
new file mode 100644
index 000000000..ad15e7787
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Edison Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				 0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x24186000 0x100>,
+			  <0x24187000 0x2a0>,
+			  <0x24188000 0xb60>,
+			  <0x24186100 0x80>,
+			  <0x24189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@24000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x24000000 0x1000000>;
+
+	clocks = <&clkpa>, <&clkcpgmac>;
+	clock-names = "pa_clk", "ethss_clk";
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-9";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			cpts {
+				clocks = <&cpts_refclk_mux>;
+				clock-names = "cpts";
+
+				cpts_refclk_mux: cpts-refclk-mux {
+					#clock-cells = <0>;
+					clocks = <&chipclk12>, <&chipclk13>,
+						 <&timi0>, <&timi1>,
+						 <&tsipclka>, <&tsrefclk>,
+						 <&tsipclkb>;
+					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+						<0x3>, <0x4>, <0x8>, <0xC>;
+					assigned-clocks = <&cpts_refclk_mux>;
+					assigned-clock-parents = <&chipclk12>;
+				};
+			};
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+				port-4 {
+					slave-port = <4>;
+					link-interface	= <2>;
+				};
+				port-5 {
+					slave-port = <5>;
+					link-interface	= <2>;
+				};
+				port-6 {
+					slave-port = <6>;
+					link-interface	= <2>;
+				};
+				port-7 {
+					slave-port = <7>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 00];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
+
+sa_subsys: subsys@24080000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+	ranges = <0 0x24080000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
new file mode 100644
index 000000000..2d94faf31
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Edison soc device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "ti,k2e", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison SoC";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	aliases {
+		rproc0 = &dsp0;
+	};
+};
+
+&soc0 {
+		/include/ "keystone-k2e-clocks.dtsi"
+
+		usb: usb@2680000 {
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			dwc3@2690000 {
+				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb1_phy: usb_phy@2620750 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620750 24>;
+			status = "disabled";
+		};
+
+		keystone_usb1: usb@25000000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x25000000 0x10000>;
+			clocks = <&clkusb1>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			usb1: dwc3@25010000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x25010000 0x70000>;
+				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb1_phy>, <&usb1_phy>;
+			};
+		};
+
+		msm_ram: sram@c000000 {
+			compatible = "mmio-sram";
+			reg = <0x0c000000 0x200000>;
+			ranges = <0x0 0x0c000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bm-sram@1f0000 {
+				reg = <0x001f0000 0x8000>;
+			};
+		};
+
+		psc: power-sleep-controller@2350000 {
+			pscrst: reset-controller {
+				compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+				>;
+			};
+		};
+
+		devctrl: device-state-control@2620000 {
+			dspgpio0: keystone_dsp_gpio@240 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x240 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x240>;
+			};
+		};
+
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2e-dsp";
+			reg = <0x10800000 0x00080000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem0>;
+			ti,syscon-dev = <&devctrl 0x844>;
+			resets = <&pscrst 0>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@21020000 {
+			compatible = "ti,keystone-pcie","snps,dw-pcie";
+			clocks = <&clkpcie1>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+			ranges = <0x82000000 0 0x60000000 0x60000000
+				  0 0x10000000>;
+
+			status = "disabled";
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
+
+			/* error interrupt */
+			interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+					<0 0 0 2 &pcie_intc1 1>, /* INT B */
+					<0 0 0 3 &pcie_intc1 2>, /* INT C */
+					<0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+			pcie_msi_intc1: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc1: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		mdio: mdio@24200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x24200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2e-netcp.dtsi"
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
new file mode 100644
index 000000000..8b3d64c91
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G EVM
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G General Purpose EVM";
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	hdmi: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+};
+
+&k2g_pinctrl {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	mmc0_pins: pinmux_mmc0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat3.mmc0_dat3 */
+			K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat2.mmc0_dat2 */
+			K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat1.mmc0_dat1 */
+			K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_dat0.mmc0_dat0 */
+			K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_clk.mmc0_clk */
+			K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2)	/* mmc0_cmd.mmc0_cmd */
+			K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc0_sdcd.gpio1_12 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat7.mmc1_dat7 */
+			K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat6.mmc1_dat6 */
+			K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat5.mmc1_dat5 */
+			K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat4.mmc1_dat4 */
+			K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	ecap0_pins: ecap0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_scs0.spi1_scs0 */
+			K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_clk.spi1_clk */
+			K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_miso.spi1_miso */
+			K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* spi1_mosi.spi1_mosi */
+		>;
+	};
+
+	qspi_pins: pinmux_qspi_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11ec) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)      /* uart2_rxd.uart2_rxd */
+			K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)      /* uart2_txd.uart2_txd */
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11fc) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE0)	/* dcan0tx.dcan0tx */
+			K2G_CORE_IOPAD(0x1200) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE0)	/* dcan0rx.dcan0rx */
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1224) (BUFFER_CLASS_B | PULL_DISABLE  | MUX_MODE1)	/* qspicsn2.dcan1tx */
+			K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE1)	/* qspicsn3.dcan1rx */
+		>;
+	};
+
+	emac_pins: pinmux_emac_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
+			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
+			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
+			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
+			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
+			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
+			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
+			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
+			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
+		>;
+	};
+
+	vout_pins: pinmux_vout_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
+			K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
+			K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
+			K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
+			K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
+			K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
+			K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
+			K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
+			K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
+			K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
+			K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
+			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
+			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
+			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
+			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
+			K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
+			K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
+			K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
+			K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
+			K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
+			K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
+			K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
+			K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
+			K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
+			K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
+			K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
+			K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
+			K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
+			K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&vcc3v3_dcin_reg>;
+	vqmmc-supply = <&vcc3v3_dcin_reg>;
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+	vqmmc-supply = <&vcc1v8_ldo1_reg>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&dsp0 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&keystone_usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&keystone_usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <5000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x100000 0xf00000>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	cdns,rclk-en;
+
+	flash0: m25p80@0 {
+		compatible = "s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,read-delay = <5>;
+		cdns,tshsl-ns = <500>;
+		cdns,tsd2d-ns = <500>;
+		cdns,tchsh-ns = <119>;
+		cdns,tslch-ns = <119>;
+
+		partition@0 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001C0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.file-system";
+			reg = <0x009C0000 0x3640000>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&dcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+&qmss {
+	status = "okay";
+};
+
+&knav_dmas {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&netcp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sii9022: sii9022@3b {
+		#sound-dai-cells = <0>;
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vout_pins>;
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
new file mode 100644
index 000000000..2a2d38cf0
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G Industrial Communication Engine EVM
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G Industrial Communication EVM";
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x00000008 0x00000000 0x00000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_fixed";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	v5_0: fixedregulator-v5_0 {
+		/* TPS54531 */
+		compatible = "regulator-fixed";
+		regulator-name = "v5_0_fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain>;
+		regulator-always-on;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		/* TLV62084 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vdd_1v8: fixedregulator-vdd_1v8 {
+		/* TLV62084 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vdds_ddr: fixedregulator-vdds_ddr {
+		/* TLV62080 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdds_ddr_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vref_ddr: fixedregulator-vref_ddr {
+		/* LP2996A */
+		compatible = "regulator-fixed";
+		regulator-name = "vref_ddr_fixed";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	vtt_ddr: fixedregulator-vtt_ddr {
+		/* LP2996A */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_ddr_fixed";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		vin-supply = <&vdd_3v3>;
+		regulator-always-on;
+	};
+
+	vdd_0v9: fixedregulator-vdd_0v9 {
+		/* TPS62180 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9_fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&v5_0>;
+		regulator-always-on;
+	};
+
+	vddb: fixedregulator-vddb {
+		/* TPS22945 */
+		compatible = "regulator-fixed";
+		regulator-name = "vddb_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
+
+	leds1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "status2:red:usr";
+			gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led7 {
+			label = "status2:green:usr";
+			gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led8 {
+			label = "status2:yellow:usr";
+			gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led9 {
+			label = "status3:red:usr";
+			gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led10 {
+			label = "status3:green:usr";
+			gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led11 {
+			label = "status3:yellow:usr";
+			gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led12 {
+			label = "status4:green:heartbeat";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&k2g_pinctrl {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	qspi_pins: pinmux_qspi_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+			K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+			K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+			K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+			K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+			K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+			K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+			K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* mmc1_sdcd.gpio0_69 */
+			K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_sdwp.mmc1_sdwp */
+			K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* mmc1_pow.mmc1_pow */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	user_leds: pinmux_user_leds {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad11.gpio0_11 */
+			K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad12.gpio0_12 */
+			K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad13.gpio0_13 */
+			K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad14.gpio0_14 */
+			K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_ad15.gpio0_15 */
+			K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_clk.gpio0_16 */
+			K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* gpmc_wen.gpio0_19 */
+			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data9.gpio0_44 */
+			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data10.gpio0_43 */
+			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data11.gpio0_42 */
+			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* dss_data12.gpio0_41 */
+			K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn0.gpio0_101 */
+			K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn1.gpio0_102 */
+		>;
+	};
+
+	emac_pins: pinmux_emac_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
+			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
+			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
+			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
+			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
+			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
+			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
+			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
+			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&dsp0 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	cdns,rclk-en;
+	status = "okay";
+
+	flash0: m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <96000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cdns,read-delay = <5>;
+		cdns,tshsl-ns = <500>;
+		cdns,tsd2d-ns = <500>;
+		cdns,tchsh-ns = <119>;
+		cdns,tslch-ns = <119>;
+
+		partition@0 {
+			label = "QSPI.u-boot";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot-env";
+			reg = <0x00100000 0x00040000>;
+		};
+		partition@2 {
+			label = "QSPI.skern";
+			reg = <0x00140000 0x0040000>;
+		};
+		partition@3 {
+			label = "QSPI.pmmc-firmware";
+			reg = <0x00180000 0x0040000>;
+		};
+		partition@4 {
+			label = "QSPI.kernel";
+			reg = <0x001c0000 0x0800000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x009c0000 0x0040000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x00a00000 0x1600000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vdd_3v3>;
+	cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_3v3>;
+	};
+};
+
+&qmss {
+	status = "okay";
+};
+
+&knav_dmas {
+	status = "okay";
+};
+
+&netcp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
new file mode 100644
index 000000000..d0e6a9a43
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G Netcp driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@4020000 {
+	compatible = "ti,66ak2g-navss-qm";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 0>;
+	clock-names = "nss_vclk";
+	ranges;
+	queue-range = <0 0x80>;
+	linkram0 = <0x4020000 0x7ff>;
+	status = "disabled";
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x80>;
+			reg = <0x4100000 0x800>,
+			      <0x4040000 0x100>,
+			      <0x4080000 0x800>,
+			      <0x40c0000 0x800>;
+			reg-names = "peek", "config",
+				    "region", "push";
+		};
+
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <77 8>;
+				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
+					     0 311 0xf04 0 312 0xf04 0 313 0xf04
+					     0 314 0xf04 0 315 0xf04>;
+				qalloc-by-id;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <112 8>;
+			};
+			netcp-tx {
+				qrange = <5 8>;
+				qalloc-by-id;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <1023 128>; /* num_desc desc_size */
+			link-index = <0x400>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 0>;
+	clock-names = "nss_vclk";
+	ranges;
+	ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x4010000 0x100>,
+		      <0x4011000 0x2a0>, /* 21 Tx channels */
+		      <0x4012000 0x400>, /* 32 Rx channels */
+		      <0x4010100 0x80>,
+		      <0x4013000 0x400>; /* 32 Rx flows */
+		reg-names = "global", "txchan", "rxchan",
+			    "txsched", "rxflow";
+	};
+
+};
+
+netcp: netcp@4000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>;
+	clock-names = "ethss_clk", "cpts";
+
+	/* NetCP address range */
+	ranges = <0 0x4000000 0x1000000>;
+
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
+	ti,navigator-dma-names = "netrx0", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe: gbe@200000 {
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-2";
+			reg = <0x200000 0x20>, <0x220000 0x20000>;
+			enable-ale;
+			tx-queue = <5>;
+			tx-channel = "nettx";
+			cpts-rftclk-sel = <0>;
+			cpts-ext-ts-inputs = <8>;
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <5>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <512 12>;
+			tx-pool = <511 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <77>;
+			tx-completion-queue = <78>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
new file mode 100644
index 000000000..05a750192
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G SOC
+ *
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/keystone.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ti,k2g","ti,keystone";
+	model = "Texas Instruments K2G SoC";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		rproc0 = &dsp0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@2561000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x2000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		usb0_phy: usb-phy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			status = "disabled";
+		};
+
+		usb1_phy: usb-phy@1 {
+			compatible = "usb-nop-xceiv";
+			reg = <1>;
+			status = "disabled";
+		};
+	};
+
+	soc0: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#pinctrl-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+		msm_ram: sram@c000000 {
+			compatible = "mmio-sram";
+			reg = <0x0c000000 0x100000>;
+			ranges = <0x0 0x0c000000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bm-sram@f7000 {
+				reg = <0x000f7000 0x8000>;
+			};
+		};
+
+		k2g_pinctrl: pinmux@2621000 {
+			compatible = "pinctrl-single";
+			reg = <0x02621000 0x410>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x001b0007>;
+		};
+
+		devctrl: device-state-control@2620000 {
+			compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
+			reg = <0x02620000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x02620000 0x1000>;
+
+			kirq0: keystone_irq@2a0 {
+				compatible = "ti,keystone-irq";
+				reg = <0x2a0 0x10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ti,syscon-dev = <&devctrl 0x2a0>;
+			};
+
+			dspgpio0: keystone_dsp_gpio@240 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x240 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x240>;
+			};
+		};
+
+		uart0: serial@2530c00 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&k2g_clks 0x2c 0>;
+			power-domains = <&k2g_pds 0x2c>;
+			status = "disabled";
+		};
+
+		uart1: serial@2531000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&k2g_clks 0x2d 0>;
+			power-domains = <&k2g_pds 0x2d>;
+			status = "disabled";
+		};
+
+		uart2: serial@2531400 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531400 0x100>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&k2g_clks 0x2e 0>;
+			power-domains = <&k2g_pds 0x2e>;
+			status = "disabled";
+		};
+
+		dcan0: can@260b200 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			reg = <0x0260B200 0x200>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			power-domains = <&k2g_pds 0x0008>;
+			clocks = <&k2g_clks 0x0008 1>;
+		};
+
+		dcan1: can@260b400 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			reg = <0x0260B400 0x200>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+			power-domains = <&k2g_pds 0x0009>;
+			clocks = <&k2g_clks 0x0009 1>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530000 0x400>;
+			clocks = <&k2g_clks 0x003a 0>;
+			power-domains = <&k2g_pds 0x003a>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530400 0x400>;
+			clocks = <&k2g_clks 0x003b 0>;
+			power-domains = <&k2g_pds 0x003b>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,keystone-i2c";
+			reg = <0x02530800 0x400>;
+			clocks = <&k2g_clks 0x003c 0>;
+			power-domains = <&k2g_pds 0x003c>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2g-dsp";
+			reg = <0x10800000 0x00100000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			power-domains = <&k2g_pds 0x0046>;
+			ti,syscon-dev = <&devctrl 0x844>;
+			resets = <&k2g_reset 0x0046 0x1>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			status = "disabled";
+		};
+
+		msgmgr: msgmgr@2a00000 {
+			compatible = "ti,k2g-message-manager";
+			#mbox-cells = <2>;
+			reg-names = "queue_proxy_region",
+				    "queue_state_debug_region";
+			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+			interrupt-names = "rx_005",
+					  "rx_057";
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmmc: pmmc@2921c00 {
+			compatible = "ti,k2g-sci";
+			/*
+			 * In case of rare platforms that does not use k2g as
+			 * system master, use /delete-property/
+			 */
+			ti,system-reboot-controller;
+			mbox-names = "rx", "tx";
+			mboxes= <&msgmgr 5 2>,
+				<&msgmgr 0 0>;
+			reg-names = "debug_messages";
+			reg = <0x02921c00 0x400>;
+
+			k2g_pds: power-controller {
+				compatible = "ti,sci-pm-domain";
+				#power-domain-cells = <1>;
+			};
+
+			k2g_clks: clocks {
+				compatible = "ti,k2g-sci-clk";
+				#clock-cells = <2>;
+			};
+
+			k2g_reset: reset-controller {
+				compatible = "ti,sci-reset";
+				#reset-cells = <2>;
+			};
+		};
+
+		gpio0: gpio@2603000 {
+			compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+			reg = <0x02603000 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,ngpio = <144>;
+			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&k2g_clks 0x001b 0x0>;
+			clock-names = "gpio";
+		};
+
+		gpio1: gpio@260a000 {
+			compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+			reg = <0x0260a000 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,ngpio = <68>;
+			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&k2g_clks 0x001c 0x0>;
+			clock-names = "gpio";
+		};
+
+		dss: dss@02540000 {
+			compatible = "ti,k2g-dss";
+			reg =	<0x02540000 0x400>,
+				<0x02550000 0x1000>,
+				<0x02557000 0x1000>,
+				<0x0255a800 0x100>,
+				<0x0255ac00 0x100>;
+			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+			clocks =	<&k2g_clks 0x2 0>,
+					<&k2g_clks 0x2 1>;
+			clock-names = "fck", "vp1";
+			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&k2g_pds 0x2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			max-memory-bandwidth = <230000000>;
+		};
+
+		edma0: edma@2700000 {
+			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+			reg =	<0x02700000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+
+			ti,edma-memcpy-channels = <32 33 34 35>;
+
+			power-domains = <&k2g_pds 0x3f>;
+		};
+
+		edma0_tptc0: tptc@2760000 {
+			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+			reg =	<0x02760000 0x400>;
+			power-domains = <&k2g_pds 0x3f>;
+		};
+
+		edma0_tptc1: tptc@2768000 {
+			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+			reg =	<0x02768000 0x400>;
+			power-domains = <&k2g_pds 0x3f>;
+		};
+
+		edma1: edma@2728000 {
+			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+			reg =	<0x02728000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+			/*
+			 * memcpy is disabled, can be enabled with:
+			 * ti,edma-memcpy-channels = <12 13 14 15>;
+			 * for example.
+			 */
+
+			power-domains = <&k2g_pds 0x4f>;
+		};
+
+		edma1_tptc0: tptc@27b0000 {
+			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+			reg =	<0x027b0000 0x400>;
+			power-domains = <&k2g_pds 0x4f>;
+		};
+
+		edma1_tptc1: tptc@27b8000 {
+			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+			reg =	<0x027b8000 0x400>;
+			power-domains = <&k2g_pds 0x4f>;
+		};
+
+		mmc0: mmc@23000000 {
+			compatible = "ti,k2g-sdhci";
+			reg = <0x23000000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+			bus-width = <4>;
+			no-1-8-v;
+			max-frequency = <96000000>;
+			power-domains = <&k2g_pds 0xb>;
+			clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+			clock-names = "fck", "mmchsdb_fck";
+			status = "disabled";
+		};
+
+		mmc1: mmc@23100000 {
+			compatible = "ti,k2g-sdhci";
+			reg = <0x23100000 0x400>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
+			bus-width = <8>;
+			no-1-8-v;
+			non-removable;
+			max-frequency = <96000000>;
+			power-domains = <&k2g_pds 0xc>;
+			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
+			clock-names = "fck", "mmchsdb_fck";
+		};
+
+		qspi: spi@2940000 {
+			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02940000 0x1000>,
+			      <0x24000000 0x4000000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x24000000>;
+			clocks = <&k2g_clks 0x43 0x0>;
+			power-domains = <&k2g_pds 0x43>;
+			status = "disabled";
+		};
+
+		mcasp0: mcasp@2340000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02340000 0x2000>,
+			      <0x21804000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma0 24 1>, <&edma0 25 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x4>;
+			clocks = <&k2g_clks 0x4 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp1: mcasp@2342000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02342000 0x2000>,
+			      <0x21804400 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 48 1>, <&edma1 49 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x5>;
+			clocks = <&k2g_clks 0x5 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@2344000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02344000 0x2000>,
+			      <0x21804800 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 50 1>, <&edma1 51 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x6>;
+			clocks = <&k2g_clks 0x6 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		keystone_usb0: keystone-dwc3@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+			power-domains = <&k2g_pds 0x0016>;
+
+			usb0: usb@2690000 {
+				compatible = "snps,dwc3";
+				reg = <0x2690000 0x10000>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				usb-phy = <&usb0_phy>;
+				status = "disabled";
+			};
+		};
+
+		keystone_usb1: keystone-dwc3@2580000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2580000 0x10000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+			power-domains = <&k2g_pds 0x0017>;
+
+			usb1: usb@2590000 {
+				compatible = "snps,dwc3";
+				reg = <0x2590000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				usb-phy = <&usb1_phy>;
+				status = "disabled";
+			};
+		};
+
+		ecap0: pwm@21d1800 {
+			compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+			#pwm-cells = <3>;
+			reg = <0x021d1800 0x60>;
+			power-domains = <&k2g_pds 0x38>;
+			clocks = <&k2g_clks 0x38 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		ecap1: pwm@21d1c00 {
+			compatible = "ti,k2g-ecap", "ti,am3352-ecap";
+			#pwm-cells = <3>;
+			reg = <0x021d1c00 0x60>;
+			power-domains = <&k2g_pds 0x39>;
+			clocks = <&k2g_clks 0x39 0x0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		spi0: spi@21805400 {
+			compatible = "ti,keystone-spi";
+			reg = <0x21805400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&k2g_pds 0x0010>;
+			clocks = <&k2g_clks 0x0010 0>;
+		};
+
+		spi1: spi@21805800 {
+			compatible = "ti,keystone-spi";
+			reg = <0x21805800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&k2g_pds 0x0011>;
+			clocks = <&k2g_clks 0x0011 0>;
+		};
+
+		spi2: spi@21805c00 {
+			compatible = "ti,keystone-spi";
+			reg = <0x21805C00 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&k2g_pds 0x0012>;
+			clocks = <&k2g_clks 0x0012 0>;
+		};
+
+		spi3: spi@21806000 {
+			compatible = "ti,keystone-spi";
+			reg = <0x21806000 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&k2g_pds 0x0013>;
+			clocks = <&k2g_clks 0x0013 0>;
+		};
+
+		wdt: wdt@02250000 {
+			compatible = "ti,keystone-wdt", "ti,davinci-wdt";
+			reg = <0x02250000 0x80>;
+			power-domains = <&k2g_pds 0x22>;
+			clocks = <&k2g_clks 0x22 0>;
+		};
+
+		emif: emif@21010000 {
+			compatible = "ti,emif-keystone";
+			reg = <0x21010000 0x200>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		mdio: mdio@4200f00 {
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+			reg = <0x04200f00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k2g_clks 0x0018 3>;
+			clock-names = "fck";
+			power-domains = <&k2g_pds 0x0018>;
+			status = "disabled";
+			bus_freq = <2500000>;
+		};
+		#include "keystone-k2g-netcp.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
new file mode 100644
index 000000000..4ba691217
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2hk-clocks.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkarm>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	ddr3bpllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3b>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+	};
+
+	clktsip: clktsip@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "tsip";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clksrio: clksrio@235002c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0@2350030 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkgem1: clkgem1@2350040 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2@2350044 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3@2350048 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4@235004c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5@2350050 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6@2350054 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7@2350058 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr31: clkddr31@2350060 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac@2350064 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clkrac01@2350068 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clkrac23@235006c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0@2350070 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1@2350074 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2@2350078 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3@235007c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4@2350080 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5@2350084 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif@2350088 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0@235008c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1@2350090 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2@2350094 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3@2350098 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0@235009c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1@23500a0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2@23500a4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3@23500a8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4@23500ac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5@23500b0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6@23500b4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7@23500b8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp@23500bc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb@23500c0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1@23500c4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge@23500c8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
new file mode 100644
index 000000000..ad4e22afe
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2hk.dtsi"
+
+/ {
+	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
+};
+
+&soc0 {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkarm: refclkarm {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <125000000>;
+				clock-output-names = "refclk-arm";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+
+			refclkddr3b: refclkddr3b {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3b";
+			};
+		};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&keystone_usb0 {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1fe80000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&dsp0 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp1 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp2 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp3 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp4 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp5 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp6 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp7 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
new file mode 100644
index 000000000..d5a6c1f56
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Hawking Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x4000>;
+	linkram0	= <0x100000 0x8000>;
+	linkram1	= <0x0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+
+		qmgr1 {
+			managed-queues = <0x2000 0x2000>;
+			reg = <0x2a60000 0x20000>,
+			      <0x2a06400 0x400>,
+			      <0x2a04000 0x1000>,
+			      <0x2a05000 0x1000>,
+			      <0x23aa0000 0x20000>,
+			      <0x2aa0000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <8704 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <8720 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <640 9>;
+				qalloc-by-id;
+			};
+			netcpx-tx {
+				qrange = <8752 8>;
+				qalloc-by-id;
+			};
+		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				   0x23aa0000 0x23ab0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x2004000 0x100>,
+			  <0x2004400 0x120>,
+			  <0x2004800 0x300>,
+			  <0x2004c00 0x120>,
+			  <0x2005000 0x400>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@2000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges  = <0 0x2000000 0x100000>;
+
+	clocks = <&clkpa>, <&clkcpgmac>;
+	clock-names = "pa_clk", "ethss_clk";
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 22>,
+			<&dma_gbe 23>,
+			<&dma_gbe 8>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gbe@90000 { /* ETHSS */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe";
+			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+			/* enable-ale; */
+			tx-queue = <648>;
+			tx-channel = "nettx";
+
+			cpts {
+				clocks = <&cpts_refclk_mux>;
+				clock-names = "cpts";
+
+				cpts_refclk_mux: cpts-refclk-mux {
+					#clock-cells = <0>;
+					clocks = <&chipclk12>, <&chipclk13>,
+						 <&timi0>, <&timi1>,
+						 <&tsrefclk>;
+					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+						<0x3>, <0x8>;
+					assigned-clocks = <&cpts_refclk_mux>;
+					assigned-clock-parents = <&chipclk12>;
+				};
+			};
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8704>;
+			tx-completion-queue = <8706>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8705>;
+			tx-completion-queue = <8707>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 6f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
+
+sa_subsys: subsys@20c0000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x20c0000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
new file mode 100644
index 000000000..8a9447703
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "ti,k2hk", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	aliases {
+		rproc0 = &dsp0;
+		rproc1 = &dsp1;
+		rproc2 = &dsp2;
+		rproc3 = &dsp3;
+		rproc4 = &dsp4;
+		rproc5 = &dsp5;
+		rproc6 = &dsp6;
+		rproc7 = &dsp7;
+	};
+};
+
+&soc0 {
+		/include/ "keystone-k2hk-clocks.dtsi"
+
+		msm_ram: sram@c000000 {
+			compatible = "mmio-sram";
+			reg = <0x0c000000 0x600000>;
+			ranges = <0x0 0x0c000000 0x600000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bm-sram@5f0000 {
+				reg = <0x5f0000 0x8000>;
+			};
+		};
+
+		psc: power-sleep-controller@2350000 {
+			pscrst: reset-controller {
+				compatible = "ti,k2hk-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+					0xa4c 8 0xa4c 8 0x84c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 4: dsp4 */
+					0xa50 8 0xa50 8 0x850 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 5: dsp5 */
+					0xa54 8 0xa54 8 0x854 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 6: dsp6 */
+					0xa58 8 0xa58 8 0x858 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 7: dsp7 */
+				>;
+			};
+		};
+
+		devctrl: device-state-control@2620000 {
+			dspgpio0: keystone_dsp_gpio@240 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x240 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x240>;
+			};
+
+			dspgpio1: keystone_dsp_gpio@244 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x244 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x244>;
+			};
+
+			dspgpio2: keystone_dsp_gpio@248 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x248 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x248>;
+			};
+
+			dspgpio3: keystone_dsp_gpio@24c {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x24c 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x24c>;
+			};
+
+			dspgpio4: keystone_dsp_gpio@250 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x250 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x250>;
+			};
+
+			dspgpio5: keystone_dsp_gpio@254 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x254 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x254>;
+			};
+
+			dspgpio6: keystone_dsp_gpio@258 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x258 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x258>;
+			};
+
+			dspgpio7: keystone_dsp_gpio@25c {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x25c 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x25c>;
+			};
+		};
+
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x10800000 0x00100000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem0>;
+			ti,syscon-dev = <&devctrl 0x40>;
+			resets = <&pscrst 0>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			status = "disabled";
+		};
+
+		dsp1: dsp@11800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x11800000 0x00100000>,
+			      <0x11e00000 0x00008000>,
+			      <0x11f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem1>;
+			ti,syscon-dev = <&devctrl 0x44>;
+			resets = <&pscrst 1>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <1 9>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio1 27 0>;
+			status = "disabled";
+		};
+
+		dsp2: dsp@12800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x12800000 0x00100000>,
+			      <0x12e00000 0x00008000>,
+			      <0x12f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem2>;
+			ti,syscon-dev = <&devctrl 0x48>;
+			resets = <&pscrst 2>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <2 10>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio2 27 0>;
+			status = "disabled";
+		};
+
+		dsp3: dsp@13800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x13800000 0x00100000>,
+			      <0x13e00000 0x00008000>,
+			      <0x13f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem3>;
+			ti,syscon-dev = <&devctrl 0x4c>;
+			resets = <&pscrst 3>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <3 11>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio3 27 0>;
+			status = "disabled";
+		};
+
+		dsp4: dsp@14800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x14800000 0x00100000>,
+			      <0x14e00000 0x00008000>,
+			      <0x14f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem4>;
+			ti,syscon-dev = <&devctrl 0x50>;
+			resets = <&pscrst 4>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <4 12>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio4 27 0>;
+			status = "disabled";
+		};
+
+		dsp5: dsp@15800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x15800000 0x00100000>,
+			      <0x15e00000 0x00008000>,
+			      <0x15f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem5>;
+			ti,syscon-dev = <&devctrl 0x54>;
+			resets = <&pscrst 5>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <5 13>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio5 27 0>;
+			status = "disabled";
+		};
+
+		dsp6: dsp@16800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x16800000 0x00100000>,
+			      <0x16e00000 0x00008000>,
+			      <0x16f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem6>;
+			ti,syscon-dev = <&devctrl 0x58>;
+			resets = <&pscrst 6>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <6 14>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio6 27 0>;
+			status = "disabled";
+		};
+
+		dsp7: dsp@17800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x17800000 0x00100000>,
+			      <0x17e00000 0x00008000>,
+			      <0x17f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem7>;
+			ti,syscon-dev = <&devctrl 0x5c>;
+			resets = <&pscrst 7>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <7 15>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio7 27 0>;
+			status = "disabled";
+		};
+
+		mdio: mdio@2090300 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02090300 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2hk-netcp.dtsi"
+};
diff --git a/arch/arm/boot/dts/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
new file mode 100644
index 000000000..635528064
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2l-clocks.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkdfeiqnsys: clkdfeiqnsys@2350004 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "dfe";
+		reg-names = "control", "domain";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		domain-id = <0>;
+	};
+
+	clkpcie1: clkpcie1@235002c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkgem1: clkgem1@2350040 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2@2350044 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3@2350048 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clktac: clktac@2350064 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac: clkrac@2350068 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkdfepd0: clkdfepd0@235006c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd0";
+		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0@2350070 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkosr: clkosr@2350088 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "osr";
+		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0@235008c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1@2350094 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0@235009c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1@23500a0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2@23500a4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3@23500a8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkbcp: clkbcp@23500bc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdfepd1: clkdfepd1@23500c0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd1";
+		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkfftc1: clkfftc1@23500c4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkiqnail: clkiqnail@23500c8 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "iqn-ail";
+		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkuart2: clkuart2@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart3: clkuart3@2350000 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
new file mode 100644
index 000000000..e200533d2
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "keystone-k2l.dtsi"
+
+/ {
+	compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+};
+
+&soc0 {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+		};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&keystone_usb0 {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x7FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	status = "ok";
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&dsp0 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp1 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp2 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
+
+&dsp3 {
+	memory-region = <&dsp_common_memory>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
new file mode 100644
index 000000000..c1f982604
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Keystone 2 Lamarr Netcp driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
+
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x26186000 0x100>,
+			  <0x26187000 0x2a0>,
+			  <0x26188000 0xb60>,
+			  <0x26186100 0x80>,
+			  <0x26189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@26000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x26000000 0x1000000>;
+
+	clocks = <&clkpa>, <&clkcpgmac>;
+	clock-names = "pa_clk", "ethss_clk";
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-5";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			cpts {
+				clocks = <&cpts_refclk_mux>;
+				clock-names = "cpts";
+
+				cpts_refclk_mux: cpts-refclk-mux {
+					#clock-cells = <0>;
+					clocks = <&chipclk12>, <&chipclk13>,
+						 <&timi0>, <&timi1>,
+						 <&tsrefclk>;
+					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+						<0x3>, <0x8>;
+					assigned-clocks = <&cpts_refclk_mux>;
+					assigned-clock-parents = <&chipclk12>;
+				};
+			};
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 7f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
+
+sa_subsys: subsys@26080000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+	ranges = <0 0x26080000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
new file mode 100644
index 000000000..dff5fea72
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "ti,k2l", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr SoC";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		rproc0 = &dsp0;
+		rproc1 = &dsp1;
+		rproc2 = &dsp2;
+		rproc3 = &dsp3;
+	};
+};
+
+&soc0 {
+		/include/ "keystone-k2l-clocks.dtsi"
+
+		uart2: serial@2348400 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@2348800 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		gpio1: gpio@2348000 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x02348000 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 154 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 155 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 156 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 161 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 164 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 165 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 168 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 169 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 401 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 402 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 403 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 404 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 405 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 407 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
+		k2l_pmx: pinmux@2620690 {
+			compatible = "pinctrl-single";
+			reg = <0x02620690 0xc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x1>;
+			status = "disabled";
+
+			uart3_emifa_pins: pinmux_uart3_emifa_pins {
+				pinctrl-single,bits = <
+					/* UART3_EMIFA_SEL */
+					0x0 0x0  0xc0
+				>;
+			};
+
+			uart2_emifa_pins: pinmux_uart2_emifa_pins {
+			pinctrl-single,bits = <
+					/* UART2_EMIFA_SEL */
+					0x0 0x0  0x30
+				>;
+			};
+
+			uart01_spi2_pins: pinmux_uart01_spi2_pins {
+				pinctrl-single,bits = <
+					/* UART01_SPI2_SEL */
+					0x0 0x0 0x4
+				>;
+			};
+
+			dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
+				pinctrl-single,bits = <
+					/* DFESYNC_RP1_SEL */
+					0x0 0x0 0x2
+				>;
+			};
+
+			avsif_pins: pinmux_avsif_pins {
+				pinctrl-single,bits = <
+					/* AVSIF_SEL */
+					0x0 0x0 0x1
+				>;
+			};
+
+			gpio_emu_pins: pinmux_gpio_emu_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
+				 * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
+				 * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
+				 * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
+				 * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
+				 * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
+				 * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
+				 * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
+				 * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
+				 * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
+				 * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
+				 * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
+				 * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
+				 * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
+				 * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
+				 */
+					0x4 0x0000 0xFFFE0000
+				>;
+			};
+
+			gpio_timio_pins: pinmux_gpio_timio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
+				 * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
+				 * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
+				 * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
+				 * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
+				 * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
+				 * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
+				 * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
+				 * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
+				 * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
+				 * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
+				 * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
+				 */
+					0x4 0x0 0xFFF0
+				>;
+			};
+
+			gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
+				 * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
+				 * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
+				 * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
+				 */
+					0x4 0x0 0xF
+				>;
+			};
+
+			gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
+				 * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
+				 * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
+				 * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
+				 * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
+				 * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
+				 * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
+				 * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
+				 * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
+				 * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
+				 * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
+				 * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
+				 * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
+				 * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
+				 * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
+				 * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
+				 */
+					0x8 0x0 0xFFFF0000
+				>;
+			};
+
+			gpio_emifa_pins: pinmux_gpio_emifa_pins {
+				pinctrl-single,bits = <
+				/*
+				 * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
+				 * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
+				 * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
+				 * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
+				 * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
+				 * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
+				 * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
+				 * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
+				 * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
+				 * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
+				 * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
+				 * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
+				 * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
+				 * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
+				 * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
+				 * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
+				 */
+					0x8 0x0 0xFFFF
+				>;
+			};
+		};
+
+		msm_ram: sram@c000000 {
+			compatible = "mmio-sram";
+			reg = <0x0c000000 0x200000>;
+			ranges = <0x0 0x0c000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bm-sram@1f8000 {
+				reg = <0x001f8000 0x8000>;
+			};
+		};
+
+		psc: power-sleep-controller@2350000 {
+			pscrst: reset-controller {
+				compatible = "ti,k2l-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
+					0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
+					0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
+				>;
+			};
+		};
+
+		osr: sram@70000000 {
+			compatible = "mmio-sram";
+			reg = <0x70000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clkosr>;
+		};
+
+		devctrl: device-state-control@2620000 {
+			dspgpio0: keystone_dsp_gpio@240 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x240 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x240>;
+			};
+
+			dspgpio1: keystone_dsp_gpio@244 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x244 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x244>;
+			};
+
+			dspgpio2: keystone_dsp_gpio@248 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x248 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x248>;
+			};
+
+			dspgpio3: keystone_dsp_gpio@24c {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x24c 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x24c>;
+			};
+		};
+
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2l-dsp";
+			reg = <0x10800000 0x00100000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem0>;
+			ti,syscon-dev = <&devctrl 0x844>;
+			resets = <&pscrst 0>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			status = "disabled";
+		};
+
+		dsp1: dsp@11800000 {
+			compatible = "ti,k2l-dsp";
+			reg = <0x11800000 0x00100000>,
+			      <0x11e00000 0x00008000>,
+			      <0x11f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem1>;
+			ti,syscon-dev = <&devctrl 0x848>;
+			resets = <&pscrst 1>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <1 9>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio1 27 0>;
+			status = "disabled";
+		};
+
+		dsp2: dsp@12800000 {
+			compatible = "ti,k2l-dsp";
+			reg = <0x12800000 0x00100000>,
+			      <0x12e00000 0x00008000>,
+			      <0x12f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem2>;
+			ti,syscon-dev = <&devctrl 0x84c>;
+			resets = <&pscrst 2>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <2 10>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio2 27 0>;
+			status = "disabled";
+		};
+
+		dsp3: dsp@13800000 {
+			compatible = "ti,k2l-dsp";
+			reg = <0x13800000 0x00100000>,
+			      <0x13e00000 0x00008000>,
+			      <0x13f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem3>;
+			ti,syscon-dev = <&devctrl 0x850>;
+			resets = <&pscrst 3>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <3 11>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio3 27 0>;
+			status = "disabled";
+		};
+
+		mdio: mdio@26200f00 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x26200f00 0x100>;
+			status = "disabled";
+			clocks = <&clkcpgmac>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+		/include/ "keystone-k2l-netcp.dtsi"
+};
+
+&spi0 {
+       ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+       ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+       ti,davinci-spi-num-cs = <5>;
+       /* Pin muxed. Enabled and configured by Bootloader */
+       status = "disabled";
+};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
new file mode 100644
index 000000000..c298675a2
--- /dev/null
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "ti,keystone";
+	model = "Texas Instruments Keystone 2 SoC";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	= &uart0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	chosen { };
+
+	memory: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	gic: interrupt-controller@2561000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x2000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000001>;
+		cpu_off		= <0x84000002>;
+		cpu_on		= <0x84000003>;
+	};
+
+	soc0: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+		pllctrl: pll-controller@2310000 {
+			compatible = "ti,keystone-pllctrl", "syscon";
+			reg = <0x02310000 0x200>;
+		};
+
+		psc: power-sleep-controller@2350000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x02350000 0x1000>;
+		};
+
+		devctrl: device-state-control@2620000 {
+			compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
+			reg = <0x02620000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x02620000 0x1000>;
+
+			kirq0: keystone_irq@2a0 {
+				compatible = "ti,keystone-irq";
+				reg = <0x2a0 0x4>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ti,syscon-dev = <&devctrl 0x2a0>;
+			};
+
+			rstctrl: reset-controller@328 {
+				compatible = "ti,keystone-reset";
+				reg = <0x328 0x10>;
+				ti,syscon-pll = <&pllctrl 0xe4>;
+				ti,syscon-dev = <&devctrl 0x328>;
+				ti,wdt-list = <0>;
+			};
+		};
+
+		/include/ "keystone-clocks.dtsi"
+
+		uart0: serial@2530c00 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			clocks	= <&clkuart0>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart1:	serial@2531000 {
+			compatible = "ti,da830-uart", "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			clocks	= <&clkuart1>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_phy: usb_phy@2620738 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620738 24>;
+			status = "disabled";
+		};
+
+		keystone_usb0: usb@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			clocks = <&clkusb>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			usb0: dwc3@2690000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x2690000 0x70000>;
+				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb_phy>, <&usb_phy>;
+			};
+		};
+
+		wdt: wdt@22f0080 {
+			compatible = "ti,keystone-wdt","ti,davinci-wdt";
+			reg = <0x022f0080 0x80>;
+			clocks = <&clkwdtimer0>;
+		};
+
+		clock_event: timer@22f0000 {
+			compatible = "ti,keystone-timer";
+			reg = <0x022f0000 0x80>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clktimer15>;
+		};
+
+		gpio0: gpio@260bf00 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x0260bf00 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
+		aemif: aemif@21000A00 {
+			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&clkaemif>;
+			clock-names = "aemif";
+			clock-ranges;
+
+			reg = <0x21000A00 0x00000100>;
+			ranges = <0 0 0x30000000 0x10000000
+				  1 0 0x21000A00 0x00000100>;
+		};
+
+		pcie0: pcie@21800000 {
+			compatible = "ti,keystone-pcie", "snps,dw-pcie";
+			clocks = <&clkpcie>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+			ranges = <0x82000000 0 0x50000000 0x50000000
+				  0 0x10000000>;
+
+			status = "disabled";
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x00 0xff>;
+
+			/* error interrupt */
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+					<0 0 0 2 &pcie_intc0 1>, /* INT B */
+					<0 0 0 3 &pcie_intc0 2>, /* INT C */
+					<0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+			pcie_msi_intc0: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc0: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		emif: emif@21010000 {
+			compatible = "ti,emif-keystone";
+			reg = <0x21010000 0x200>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
+			interrupt-parent = <&gic>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
new file mode 100644
index 000000000..396bcba08
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6192-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
new file mode 100644
index 000000000..faa05849a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
new file mode 100644
index 000000000..e84c54b77
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
+	};
+	ocp@f1000000 {
+
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6282-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+
+			/*
+			 * Default I2C1 pinctrl setting on mpp36/mpp37,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_twsi1: pmx-twsi1 {
+				marvell,pins = "mpp36", "mpp37";
+				marvell,function = "twsi1";
+			};
+
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		thermal: thermal@10078 {
+			compatible = "marvell,kirkwood-thermal";
+			reg = <0x10078 0x4>;
+			status = "okay";
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c1: i2c@11100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
new file mode 100644
index 000000000..299c14729
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	mbus@f1000000 {
+		pciec: pcie@82000000 {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
new file mode 100644
index 000000000..a7636fe28
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Excito Bubba B3
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ *
+ * Note: This requires a new'ish version of u-boot, which disables the
+ * L2 cache. If your B3 silently fails to boot, u-boot is probably too
+ * old. Either upgrade, or consider the following email:
+ *
+ * https://lists.debian.org/debian-arm/2012/08/msg00128.html
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Excito B3";
+	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	memory { /* 512 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_beeper: pmx-beeper {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p16@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p16", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0xc0000>;
+					label = "u-boot";
+				};
+
+				partition@c0000 {
+					reg = <0xc0000 0x20000>;
+					label = "u-boot env";
+				};
+
+				partition@e0000 {
+					reg = <0xe0000 0x120000>;
+					label = "data";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			/*
+			 * There is something on the bus at address 0x64.
+			 * Not yet identified what it is, maybe the eeprom
+			 * for the Atheros WiFi chip?
+			 */
+		};
+
+
+		serial@12000 {
+			/* Internal on test pins, 3.3v TTL
+		 	 * UART0_RX = Testpoint 65
+			 * UART0_TX = Testpoint 66
+			 * See the Excito Wiki for more details.
+		 	 */
+			status = "okay";
+		};
+
+		sata@80000 {
+			/* One internal, the second as eSATA */
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * There is one LED "port" on the front and the colours
+		 * mix together giving some interesting combinations.
+		 */
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_green &pmx_led_red
+			      &pmx_led_blue >;
+		pinctrl-names = "default";
+
+		programming_led {
+			label = "bubba3:green:programming";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		error_led {
+			label = "bubba3:red:error";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_led {
+			label = "bubba3:blue:active";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power-button {
+			/* On the back */
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper: beeper {
+		/* 4KHz Piezoelectric buzzer */
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@24 {
+		device_type = "ethernet-phy";
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
new file mode 100644
index 000000000..07fbfca44
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Seagate Blackarmor NAS220
+ *
+ * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Seagate Blackarmor NAS220";
+	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		button {
+			label = "Power";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-power {
+			label = "nas220:blue:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Serial port routed to connector CN5
+ *
+ * pin 1 - TX (CPU's TX)
+ * pin 4 - RX (CPU's RX)
+ * pin 6 - GND
+ */
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
+	pinctrl-names = "default";
+
+	pmx_act_sata0: pmx-act-sata0 {
+		marvell,pins = "mpp15";
+		marvell,function = "sata0";
+	};
+
+	pmx_act_sata1: pmx-act-sata1 {
+		marvell,pins = "mpp16";
+		marvell,function = "sata1";
+	};
+
+	pmx_power_sata0: pmx-power-sata0 {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_sata1: pmx-power-sata1 {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_reset: pmx-button-reset {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_power: pmx-button-power {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	adt7476: thermal@2e {
+		compatible = "adi,adt7476";
+		reg = <0x2e>;
+	};
+};
+
+&nand {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		 reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
new file mode 100644
index 000000000..448b0cd23
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "LaCie CloudBox";
+	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+				marvell,pins = "mpp15";
+				marvell,function = "sata0";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_cloudbox_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "cloudbox:red:fail";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		blue-sata {
+			label = "cloudbox:blue:sata";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
new file mode 100644
index 000000000..bd3b266dd
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie d2 Network v2";
+	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "d2net_v2:blue:sata";
+			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "d2net_v2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
new file mode 100644
index 000000000..2adb17c95
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
new file mode 100644
index 000000000..f84a48539
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
new file mode 100644
index 000000000..6fe2e3153
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
new file mode 100644
index 000000000..b3ad3f607
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DIR-665";
+	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 =< &pmx_led_usb
+				     &pmx_led_internet_blue
+				     &pmx_led_internet_amber
+				     &pmx_led_5g &pmx_led_status_blue
+				     &pmx_led_wps &pmx_led_status_amber
+				     &pmx_led_24g
+				     &pmx_btn_restart &pmx_btn_wps>;
+			pinctrl-names = "default";
+
+			pmx_led_usb: pmx-led-usb {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_blue: pmx-led-internet-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_amber: pmx-led-internet-amber {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_5g: pmx-led-5g {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_blue: pmx-led-status-blue {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_wps: pmx-led-wps {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_amber: pmx-led-status-amber {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_24g: pmx-led-24g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_btn_restart: pmx-btn-restart {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_btn_wps: pmx-btn-wps {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				reg = <0>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "nvram";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "kernel";
+					reg = <0x40000 0x180000>;
+				};
+
+				partition@1c0000 {
+					label = "rootfs";
+					reg = <0x1c0000 0xe00000>;
+				};
+
+				cal_data: partition@fc0000 {
+					label = "cal_data";
+					reg = <0xfc0000 0x10000>;
+					read-only;
+				};
+
+				partition@fd0000 {
+					label = "lang_pack";
+					reg = <0xfd0000 0x30000>;
+					read-only;
+				};
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-usb {
+			label = "dir665:blue:usb";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-internet {
+			/* Can only be turned on if the Internet
+			 * Ethernet port has Link
+			 */
+			label = "dir665:blue:internet";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		amber-internet {
+			label = "dir665:amber:internet";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wifi5g {
+			label = "dir665:blue:5g";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+		blue-status {
+			label = "dir665:blue:status";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wps {
+			label = "dir665:blue:wps";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		amber-status {
+			label = "dir665:amber:status";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+		blue-24g {
+			label = "dir665:blue:24g";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
new file mode 100644
index 000000000..d6b0f418f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-320 NAS (Rev A1)";
+	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
+		};
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
new file mode 100644
index 000000000..94d9c06cb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-325 NAS (Rev A1)";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
new file mode 100644
index 000000000..eb917462b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+		eject {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
+				     &pmx_present_sata1 &pmx_fan_tacho
+				     &pmx_temp_alarm>;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
new file mode 100644
index 000000000..6a3f1bf6d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
new file mode 100644
index 000000000..7f326e267
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+			     &pmx_led_wifi_ap >;
+		pinctrl-names = "default";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts
new file mode 100644
index 000000000..29982e7ac
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds109.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000..d68c616e9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts
new file mode 100644
index 000000000..e1420cbcd
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds111.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
new file mode 100644
index 000000000..f48609e95
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS112";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts
new file mode 100644
index 000000000..f41fe95e0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds209.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts
new file mode 100644
index 000000000..729f959a7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds210.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts
new file mode 100644
index 000000000..416bab50d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts
new file mode 100644
index 000000000..14cf4d8af
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds212j.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts
new file mode 100644
index 000000000..a8650f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts
new file mode 100644
index 000000000..27a1d840b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
new file mode 100644
index 000000000..86907be70
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts
new file mode 100644
index 000000000..bb3200dae
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411j.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts
new file mode 100644
index 000000000..9c5364a4e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
new file mode 100644
index 000000000..02d87e0a1
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_orange
+			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
new file mode 100644
index 000000000..ff1260ee3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		/* AzureWave AW-GH381 WiFi/BT */
+		mvsdio@90000 {
+			status = "okay";
+			non-removable;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+			      &pmx_led_wmode_r &pmx_led_wmode_g >;
+		pinctrl-names = "default";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
new file mode 100644
index 000000000..962a910a6
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+			     &pmx_led_usb_transfer>;
+		pinctrl-names = "default";
+
+		green-os {
+			label = "ib62x0:green:os";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		red-os {
+			label = "ib62x0:red:os";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+		usb-copy {
+			label = "ib62x0:red:usb_copy";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
new file mode 100644
index 000000000..4a512d809
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_level: pmx-led-level {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_blue: pmx-led-power-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_red: pmx-power-red {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb1: pmx-led-usb1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb2: pmx-led-usb2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb3: pmx-led-usb3 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb4: pmx-led-usb4 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_otb: pmx-led-otb {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+			      &pmx_led_power_red &pmx_led_usb1
+			      &pmx_led_usb2 &pmx_led_usb3
+			      &pmx_led_usb4 &pmx_led_otb >;
+		pinctrl-names = "default";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+		pinctrl-names = "default";
+
+		otb {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 000000000..62272d586
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_backup &pmx_led_power
+			      &pmx_led_rebuild &pmx_led_health >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		health_led {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_power
+			     &pmx_button_otb>;
+		pinctrl-names = "default";
+
+
+		Power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "rootfs";
+		reg = <0x400000 0x1C00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
new file mode 100644
index 000000000..1bc16a5cd
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
new file mode 100644
index 000000000..75dc83914
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
new file mode 100644
index 000000000..515be7bcc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Fixed Eth";
+	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;  /* <SPEED_1000> */
+		duplex = <1>; /* <DUPLEX_FULL> */
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000..f035eff1c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
new file mode 100644
index 000000000..0d81c43a6
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Check Point L-50 Board Description
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Check Point L-50";
+	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
+			pinctrl-names = "default";
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_button29: pmx_button29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led38: pmx_led38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio1 14 9>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			gpio2: gpio-expander@20{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x20>;
+
+				gpio-controller;
+			};
+
+			/* Three GPIOs from 0x21 exp. are undescribed in dts:
+			 * 1: DSL module reset (active low)
+			 * 5: mPCIE reset (active low)
+			 * 6: Express card reset (active low)
+			 */
+			gpio3: gpio-expander@21{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x21>;
+
+				gpio-controller;
+			};
+
+			rtc@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "l-50:green:status";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		status_red {
+			label = "l-50:red:status";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "l-50:green:wifi";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		internet_green {
+			label = "l-50:green:internet";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_red {
+			label = "l-50:red:internet";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1_green {
+			label = "l-50:green:usb1";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port3>;
+		};
+
+		usb1_red {
+			label = "l-50:red:usb1";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2_green {
+			label = "l-50:green:usb2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+
+		usb2_red {
+			label = "l-50:red:usb2";
+			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	usb1_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	mpcie_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	express_card_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "express_card_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		factory_defaults {
+			label = "factory_defaults";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy8: ethernet-phy@8 {
+		reg = <0x08>;
+	};
+
+	switch0: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan6";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan7";
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch1port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				phy-mode = "rgmii-id";
+				ethernet = <&eth1port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	switch@11 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11>;
+		dsa,member = <0 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan8";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan4";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "dmz";
+			};
+
+			switch1port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "dsl";
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000c0000>;
+	};
+
+	partition@a0000 {
+		label = "bootldr-env";
+		reg = <0x000c0000 0x00040000>;
+	};
+
+	partition@100000 {
+		label = "kernel-1";
+		reg = <0x00100000 0x00800000>;
+	};
+
+	partition@900000 {
+		label = "rootfs-1";
+		reg = <0x00900000 0x07100000>;
+	};
+
+	partition@7a00000 {
+		label = "kernel-2";
+		reg = <0x07a00000 0x00800000>;
+	};
+
+	partition@8200000 {
+		label = "rootfs-2";
+		reg = <0x08200000 0x07100000>;
+	};
+
+	partition@f300000 {
+		label = "default_sw";
+		reg = <0x0f300000 0x07900000>;
+	};
+
+	partition@16c00000 {
+		label = "logs";
+		reg = <0x16c00000 0x01800000>;
+	};
+
+	partition@18400000 {
+		label = "preset_cfg";
+		reg = <0x18400000 0x00100000>;
+	};
+
+	partition@18500000 {
+		label = "adsl";
+		reg = <0x18500000 0x00100000>;
+	};
+
+	partition@18600000 {
+		label = "storage";
+		reg = <0x18600000 0x07a00000>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port3: port@3 {
+			reg = <3>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
new file mode 100644
index 000000000..6158214a9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "LaCie LaPlug";
+	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "laplug_v2:red:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-power {
+			label = "laplug_v2:blue:power";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power_back1: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Back 1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_back2: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power Back 2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_front: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "USB Power Front";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	/* Total size : 512MB */
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>; /* 1MB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>; /* 16MB */
+	};
+
+	partition@1100000 {
+		label = "rootfs";
+		reg = <0x1100000 0x1EF00000>; /* 495MB */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
new file mode 100644
index 000000000..377b6e970
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		usb_power: regulator@1 {
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
new file mode 100644
index 000000000..ba629e02b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		usb_power: regulator@1 {
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
new file mode 100644
index 000000000..8bb381088
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-QVL
+ *
+ * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
+ *
+ * Based on kirkwood-linkstation-lswvl.dts,
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-QVL";
+	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr2: pmx-led-hdderr2 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr3: pmx-led-hdderr3 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1
+			     &pmx_led_hdderr2
+			     &pmx_led_hdderr3>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr2-led {
+			label = "linkstation:red:hdderr2";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr3-led {
+			label = "linkstation:red:hdderr3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
new file mode 100644
index 000000000..3f2a0bfe0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-VL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-VL";
+	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
new file mode 100644
index 000000000..c42d0da38
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WSXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WSXL";
+	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
new file mode 100644
index 000000000..e0f62adc0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL";
+	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 000000000..c6024b569
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
new file mode 100644
index 000000000..407d6d8b3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree common file for kirkwood based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		function-button {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+		};
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
new file mode 100644
index 000000000..2f9660f3b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
+ *
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
+ * (c) 2014 Randy C. Will <randall.will@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Linksys Viper (E4200v2 / EA4500)";
+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
+		pinctrl-names = "default";
+
+		wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+		pinctrl-names = "default";
+
+		white-health {
+			label = "viper:white:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-pulse {
+			label = "viper:white:pulse";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_led_white_health: pmx-led-white-health {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+	pmx_led_white_pulse: pmx-led-white-pulse {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+	pmx_btn_wps: pmx-btn-wps {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	pmx_btn_reset: pmx-btn-reset {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "u_env";
+			reg = <0x80000 0x20000>;
+		};
+
+		partition@a0000 {
+			label = "s_env";
+			reg = <0xA0000 0x20000>;
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x200000 0x2A0000>;
+		};
+
+		partition@4a0000 {
+			label = "rootfs";
+			reg = <0x4A0000 0x1760000>;
+		};
+
+		partition@1c00000 {
+			label = "alt_kernel";
+			reg = <0x1C00000 0x2A0000>;
+		};
+
+		partition@1ea0000 {
+			label = "alt_rootfs";
+			reg = <0x1EA0000 0x1760000>;
+		};
+
+		partition@3600000 {
+			label = "syscfg";
+			reg = <0x3600000 0x4A00000>;
+		};
+
+		partition@c0000 {
+			label = "unused";
+			reg = <0xC0000 0x140000>;
+		};
+
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <16>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "ethernet1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ethernet2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ethernet3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ethernet4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex.
+ */
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+/* eth1 is connected to the switch at port 6. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion.
+ */
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the board, so the RTC does not keep
+ * time when there is no power, making it useless.
+ */
+&rtc {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
new file mode 100644
index 000000000..1d737d903
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-CHLv2";
+	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
new file mode 100644
index 000000000..a56e0d797
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-XHL";
+	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
new file mode 100644
index 000000000..88b70ba1c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		option {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+		reserved {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+
+		func_blue {
+			label = "lsxl:blue:func";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		alarm {
+			label = "lsxl:red:alarm";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lsxl:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lsxl:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		func_red {
+			label = "lsxl:red:func";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+		         &gpio0 18 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
new file mode 100644
index 000000000..b80d12f6a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "MPL CEC4";
+	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+                i2c@11000 {
+                        status = "okay";
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+
+                };
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			/* No WP GPIO */
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health
+			      &pmx_led_user1o
+			      &pmx_led_user1g &pmx_led_user0o
+			      &pmx_led_user0g &pmx_led_misc
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		user1o {
+			label = "user1:orange";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user1g {
+			label = "user1:green";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0o {
+			label = "user0:orange";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0g {
+			label = "user0:green";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		misc {
+			label = "status:orange:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 000000000..2e1a75348
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		restart {
+			label = "SWR Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
new file mode 100644
index 000000000..6a2934b7d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nas2big.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 2Big NAS
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big NAS";
+	compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		rtc@10300 {
+			/* The on-chip RTC is not powered (no supercap). */
+			status = "disabled";
+		};
+		spi@10600 {
+			/*
+			 * A NAND flash is used instead of an SPI flash for
+			 * the other netxbig-compatible boards.
+			 */
+			status = "disabled";
+		};
+	};
+
+	fan {
+		/*
+		 * An I2C fan controller (GMT G762) is used but alarm is
+		 * wired to a separate GPIO.
+		 */
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+		clocks {
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/*
+	 * An external I2C RTC (Dallas DS1337S+) is used. This allows
+	 * to power-up the board on an RTC alarm. The external RTC can
+	 * be kept powered, even when the SoC is off.
+	 */
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+		interrupts = <43>;
+	};
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
+
+&nand {
+	chip-delay = <50>;
+	status = "okay";
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>;
+	};
+
+	partition@1100000 {
+		label = "root";
+		reg = <0x1100000 0x8000000>;
+	};
+
+	partition@9100000 {
+		label = "unused";
+		reg = <0x9100000 0x6f00000>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
new file mode 100644
index 000000000..3e3ac289e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
new file mode 100644
index 000000000..cba8a2b6f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 5Big Network v2";
+	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <3>;
+		regulator-name = "hdd2power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <4>;
+		regulator-name = "hdd3power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <5>;
+		regulator-name = "hdd4power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	netxbig-leds {
+		blue-sata2 {
+			label = "netxbig:blue:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata2 {
+			label = "netxbig:red:sata2";
+			mode-addr = <5>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata3 {
+			label = "netxbig:blue:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata3 {
+			label = "netxbig:red:sata3";
+			mode-addr = <6>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata4 {
+			label = "netxbig:blue:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata4 {
+			label = "netxbig:red:sata4";
+			mode-addr = <7>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
+};
+
+&mdio {
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
new file mode 100644
index 000000000..cb564c3bc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for NETGEAR ReadyNAS Duo v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS Duo v2";
+	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_activity: pmx-led-blue-activity {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_backup >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		activity_led {
+			label = "status:blue:activity_led";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 000000000..b13aee570
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS NV+ v2";
+	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk3: pmx-led-blue-disk3 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk4: pmx-led-blue-disk4 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 1 GPIO_ACTIVE_HIGH>,
+				<&gpio1 3 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk3_led {
+			label = "status:blue:disk3_led";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		disk4_led {
+			label = "status:blue:disk4_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
new file mode 100644
index 000000000..b5737026e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+*/
+
+#include <dt-bindings/leds/leds-netxbig.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * esc and power represent a three position rocker
+		 * switch. Thus the conventional KEY_POWER does not fit
+		 */
+		exc {
+			label = "Back power switch (on|auto)";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+		power {
+			label = "Back power switch (auto|off)";
+			linux,code = <KEY_1>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		option {
+			label = "Function button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd0power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	netxbig_gpio_ext: netxbig-gpio-ext {
+		compatible = "lacie,netxbig-gpio-ext";
+
+		addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+			      &gpio1 16 GPIO_ACTIVE_HIGH
+			      &gpio1 17 GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+			      &gpio1 13 GPIO_ACTIVE_HIGH
+			      &gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	netxbig-leds {
+		compatible = "lacie,netxbig-leds";
+
+		gpio-ext = <&netxbig_gpio_ext>;
+
+		timers = <NETXBIG_LED_TIMER1 500 500
+			  NETXBIG_LED_TIMER2 500 1000>;
+
+		blue-power {
+			label = "netxbig:blue:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 1
+				    NETXBIG_LED_TIMER1 3
+				    NETXBIG_LED_TIMER2 7>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		red-power {
+			label = "netxbig:red:power";
+			mode-addr = <0>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <1>;
+			max-brightness = <7>;
+		};
+		blue-sata0 {
+			label = "netxbig:blue:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata0 {
+			label = "netxbig:red:sata0";
+			mode-addr = <3>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		blue-sata1 {
+			label = "netxbig:blue:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 7
+				    NETXBIG_LED_SATA 1
+				    NETXBIG_LED_TIMER1 3>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+		red-sata1 {
+			label = "netxbig:red:sata1";
+			mode-addr = <4>;
+			mode-val = <NETXBIG_LED_OFF 0
+				    NETXBIG_LED_ON 2
+				    NETXBIG_LED_TIMER1 4>;
+			bright-addr = <2>;
+			max-brightness = <7>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_button_function: pmx-button-function {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_off: pmx-button-power-off {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_on: pmx-button-power-on {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
new file mode 100644
index 000000000..51530ea86
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@X {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
new file mode 100644
index 000000000..7b67083e1
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
new file mode 100644
index 000000000..b0cb5907e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Lite v2";
+	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
new file mode 100644
index 000000000..c0a087e77
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
new file mode 100644
index 000000000..5b9fa14b6
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-ns2.h>
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	/* This machine is embedded in the first LaCie CloudBox product. */
+	model = "LaCie Network Space Mini v2";
+	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 3000 15
+			 3180 14
+			 4140 13
+			 4570 12
+			 6760 11
+			 7140 10
+			 7980  9
+			 9200  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+			modes-map = <NS_V2_LED_OFF  1 0
+				     NS_V2_LED_ON   0 1
+				     NS_V2_LED_ON   1 1
+				     NS_V2_LED_SATA 0 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
new file mode 100644
index 000000000..9b861c2e7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_unknown>;
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_red: pmx-led-usb-red {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_unknown: pmx-unknown {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			adt7476: adt7476a@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
+			     &pmx_led_usb_green &pmx_led_usb_red
+			     &pmx_led_sys_green &pmx_led_sys_red
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd_green &pmx_led_hdd_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		red-usb {
+			label = "nsa310:red:usb";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
new file mode 100644
index 000000000..b85e314f0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			lm85: lm85@2e {
+				compatible = "national,lm85";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
new file mode 100644
index 000000000..b69b096f2
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "Zyxel NSA320";
+	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			/* SATA Activity and Present pins are not connected */
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa320:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa320:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa320:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa320:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa320:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa320:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa320:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa320:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa320:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	hwmon {
+		compatible = "zyxel,nsa320-mcu";
+		pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+		pinctrl-names = "default";
+
+		data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 000000000..6f8085dbb
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "ZyXEL NSA325";
+	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Buzzer needs to be switched at around 1kHz so is
+			 * not compatible with the gpio-beeper driver.
+			 */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		/* This board uses the pcf8563 RTC instead of the SoC RTC */
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_pwr_sata1>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa325:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa325:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa325:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa325:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa325:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa325:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa325:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa325:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa325:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+	};
+
+
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 000000000..2c4037b07
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
new file mode 100644
index 000000000..8ea430168
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA6";
+	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s35390a: s35390a@30 {
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp28", "mpp29", "mpp30", "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa6:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa6:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa6:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x20000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	pinctrl-0 = <&pmx_gpio_header>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
new file mode 100644
index 000000000..946f0f453
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s24c02: s24c02@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts
new file mode 100644
index 000000000..094191ece
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
new file mode 100644
index 000000000..d4e0b8150
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+				#sound-dai-cells = <0>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0 0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
new file mode 100644
index 000000000..888e13320
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
new file mode 100644
index 000000000..47f03c69c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-rs232-rs485 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-uart-sd {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+		gpio@10100 {
+			p28 {
+				gpio-hog;
+				gpios = <28 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelRS232or485 selects between RS-232 or RS-485
+				 * mode for the second UART.
+				 *
+				 * Low: RS-232
+				 * High: RS-485
+				 *
+				 * To use the second UART, you need to change also
+				 * the SelUARTorSD.
+				 */
+				output-low;
+				line-name = "SelRS232or485";
+			};
+		};
+		gpio@10140 {
+			p2 {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelUARTorSD selects between the second UART
+				 * (serial@12100) and SD (mvsdio@90000).
+				 *
+				 * Low: UART
+				 * High: SD
+				 *
+				 * When changing this line make sure the newly
+				 * selected device node is enabled and the
+				 * previously selected device node is disabled.
+				 */
+				output-high; /* Select SD by default */
+				line-name = "SelUARTorSD";
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
new file mode 100644
index 000000000..f9e95e55f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Cloud Engines Pogoplug E02";
+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "pogo_e02:green:health";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "pogo_e02:orange:fault";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+		      &pmx_led_green >;
+	pinctrl-names = "default";
+
+	pmx_usb_power_enable: pmx-usb-power-enable {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_orange: pmx-led-orange {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0x5b00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 000000000..5aa4669ae
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Cloud Engines PogoPlug Series 4";
+	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "uart0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_eject>;
+		pinctrl-names = "default";
+
+		eject {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "Eject Button";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "pogoplugv4:green:health";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		fault {
+			label = "pogoplugv4:red:fault";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	pmx_sdio_wp: pmx-sdio-wp {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_eject: pmx-button-eject {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp22";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_red: pmx-led-red {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	nr-ports = <1>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+	pinctrl-names = "default";
+	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+	/* 128 MiB of NAND flash */
+	chip-delay = <40>;
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x00000000 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "uImage";
+			reg = <0x00200000 0x300000>;
+		};
+
+		partition@500000 {
+			label = "uImage2";
+			reg = <0x00500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "failsafe";
+			reg = <0x00800000 0x800000>;
+		};
+
+		partition@1000000 {
+			label = "root";
+			reg = <0x01000000 0x7000000>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000..712d6042b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+                        pmx_usb_power: pmx-usb-power {
+                                marvell,pins = "mpp10";
+                                marvell,function = "gpo";
+                        };
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                pinctrl-0 = <&pmx_usb_power>;
+                pinctrl-names = "default";
+
+                usb_power: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "USB VBUS";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                };
+	};
+};
+
+&mdio {
+        status = "okay";
+
+        ethphy0: ethernet-phy@8 {
+                reg = <8>;
+        };
+};
+
+&eth0 {
+        status = "okay";
+        ethernet0-port@0 {
+                phy-handle = <&ethphy0>;
+        };
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
new file mode 100644
index 000000000..5da163591
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 A Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions for the board with the A0 or
+ * higher stepping of the SoC. The ethernet switch does not have a
+ * "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
+	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		 reg = <11>;
+	};
+};
+
+&switch {
+	reg = <10>;
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		 phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
new file mode 100644
index 000000000..9d88301da
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Z0 stepping descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+};
+
+&eth1 {
+      status = "disabled";
+};
+
+&switch {
+	reg = <0>;
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000..f1f8eee13
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+       };
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "rootfs";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
new file mode 100644
index 000000000..c51cea883
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts
new file mode 100644
index 000000000..43673b03c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs409.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts
new file mode 100644
index 000000000..41fa63cec
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rs411.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 000000000..0a698d3b7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_wp: pmx-sdio-wp {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
new file mode 100644
index 000000000..ae8f493c9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies eSATA SheevaPlug";
+	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
new file mode 100644
index 000000000..c73cc904e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies SheevaPlug";
+	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		misc {
+			label = "sheevaplug:red:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
new file mode 100644
index 000000000..217bd374e
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ */
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@80000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@3c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@3d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@3f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
new file mode 100644
index 000000000..fe63b3a03
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "HP t5325 Thin Client";
+	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+			pinctrl-names = "default";
+
+			pmx_button_power: pmx-button_power {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_led: pmx-led {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+				marvell,function = "spi";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_i2s: pmx-i2s {
+				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+					       "mpp43";
+				marvell,function = "audio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80", "jedec,spi-nor";
+				spi-max-frequency = <86000000>;
+				reg = <0>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@1 {
+					reg = <0x80000 0x40000>;
+					label = "SSD firmware";
+				};
+
+				partition@2 {
+					reg = <0xc0000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@3 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+
+				partition@4 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			alc5621: alc5621@1a {
+				compatible = "realtek,alc5621";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				add-ctrl = <0x3700>;
+				jack-det-ctrl = <0x4810>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		audio: audio-controller@a0000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_sata_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB-SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
new file mode 100644
index 000000000..a5b51e29f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Universal Scientific Industrial Co. Topkick-1281P2";
+	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/*
+			 * Switch positions
+			 *
+			 *     /-SW_LEFT(2)
+			 *     |
+			 *     |   /-SW_IDLE
+			 *     |   |
+			 *     |   |   /-SW_RIGHT
+			 *     |   |   |
+			 * PS [L] [I] [R] LEDS
+			 */
+			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
+				     &pmx_sw_idle &pmx_sw_left2>;
+			pinctrl-names = "default";
+
+			pmx_led_disk_yellow: pmx-led-disk-yellow {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_blue: pmx-led-sys-blue {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_green: pmx-led-wifi-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left: pmx-sw-left {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_right: pmx-sw-right {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_idle: pmx-sw-idle {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left2: pmx-sw-left2 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * GPIO LED layout
+		 *
+		 *       /-SYS_LED(2)
+		 *       |
+		 *       |   /-DISK_LED
+		 *       |   |
+		 *       |   |   /-WLAN_LED(2)
+		 *       |   |   |
+		 * [SW] [*] [*] [*]
+		 */
+
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
+			     &pmx_led_sys_blue &pmx_led_wifi_green
+			     &pmx_led_wifi_yellow>;
+		pinctrl-names = "default";
+
+		disk {
+			label = "topkick:yellow:disk";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+		system2 {
+			label = "topkick:red:system";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		system {
+			label = "topkick:blue:system";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wifi {
+			label = "topkick:green:wifi";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "topkick:yellow:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_pwr_enable>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
new file mode 100644
index 000000000..30892c19a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
new file mode 100644
index 000000000..aba120598
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
new file mode 100644
index 000000000..994cabcf4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	model = "QNAP TS219 family";
+	compatible = "qnap,ts219", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+		serial@12100 {
+			status = "okay";
+		};
+		poweroff@12100 {
+			compatible = "qnap,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x00000000 0x00080000>;
+					label = "U-Boot";
+				};
+
+				partition@200000 {
+					reg = <0x00200000 0x00200000>;
+					label = "Kernel";
+				};
+
+				partition@400000 {
+					reg = <0x00400000 0x00900000>;
+					label = "RootFS1";
+				};
+				partition@d00000 {
+					reg = <0x00d00000 0x00300000>;
+					label = "RootFS2";
+				};
+				partition@40000 {
+					reg = <0x00080000 0x00040000>;
+					label = "U-Boot Config";
+				};
+				partition@c0000 {
+					reg = <0x000c0000 0x00140000>;
+					label = "NAS Config";
+				};
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@X {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&rtc {
+	/*
+	 * There is a s35390a available on the i2c bus, the internal rtc isn't
+	 * working (probably no crystal assembled).
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
new file mode 100644
index 000000000..4a42ebcca
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
new file mode 100644
index 000000000..be772e194
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
new file mode 100644
index 000000000..717236853
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		copy {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
new file mode 100644
index 000000000..6c8d94bea
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,feroceon";
+			reg = <0>;
+			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+			clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
+	};
+
+	aliases {
+	       gpio0 = &gpio0;
+	       gpio1 = &gpio1;
+	       i2c0 = &i2c0;
+	};
+
+	mbus@f1000000 {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		nand: nand@12f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		crypto_sram: sa-sram@301 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+			clocks = <&gate_clk 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf1000000 0x0100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pinctrl: pin-controller@10000 {
+			/* set compatible property in SoC file */
+			reg = <0x10000 0x20>;
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
+			/*
+			 * Default SPI0 pinctrl setting with CSn on mpp0,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpios = <18>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <33>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <34>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		sysc: system-controller@20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
+
+		intc: interrupt-controller@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		wdt: watchdog-timer@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>, <0x20108 0x4>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		cesa: crypto@30000 {
+			compatible = "marvell,kirkwood-crypto";
+			reg = <0x30000 0x10000>;
+			reg-names = "regs";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			marvell,crypto-srams = <&crypto_sram>;
+			marvell,crypto-sram-size = <0x800>;
+			status = "okay";
+		};
+
+		usb0: ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			status = "okay";
+		};
+
+		dma0: xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		dma1: xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60B00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			eth0port: ethernet0-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			pinctrl-0 = <&pmx_ge1>;
+			pinctrl-names = "default";
+			status = "disabled";
+
+			eth1port: ethernet1-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		sata_phy0: sata-phy@82000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x82000 0x0334>;
+			clocks = <&gate_clk 14>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		sata_phy1: sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		audio0: audio-controller@a0000 {
+			compatible = "marvell,kirkwood-audio";
+			#sound-dai-cells = <0>;
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
new file mode 100644
index 000000000..3240c67e0
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
new file mode 100644
index 000000000..c757f0d77
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
new file mode 100644
index 000000000..7d0468a23
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		sysboot2 {
+			label = "gpio3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
+		  2 0 0x10000000 0x2000000>;    /* CS2: 32MB for NOR */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0: display {
+		/* This isn't the exact LCD, but the timings meet spec */
+		compatible = "logicpd,type28";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_pin>;
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&twl_pwm 0 5000000>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;			/* gpio_110 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
+		>;
+	};
+
+	lcd_enable_pin: pinmux_lcd_enable_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	led_pins_wkup: pinmux_led_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
+		>;
+	};
+};
+
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
new file mode 100644
index 000000000..55b619c99
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 3 0>;   /* gpio_3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vaux3>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+		#phy-cells = <0>;
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+				ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1273";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
+		>;
+	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)        /* gpmc_ncs6.gpio_57 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_reset_pin>;
+	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+		>;
+	};
+	wl127x_gpio: pinmux_wl127x_gpio_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)		/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
new file mode 100644
index 000000000..57bae2aa9
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
new file mode 100644
index 000000000..b55361329
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+/*
+ * There are two types of 4.3" LCD, Type 15 and Type 28.
+ * By default, type 15 was used.  This device tree file
+ * uses the timing for the type 28 LCD
+ */
+
+#include "logicpd-torpedo-37xx-devkit.dts"
+
+&lcd0 {
+	compatible = "logicpd,type28";
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
new file mode 100644
index 000000000..5532db040
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 29 0>;   /* gpio157 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
+	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	/delete-property/dma-names;
+	bluetooth {
+		compatible = "ti,wl1283-st";
+		enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */
+		max-speed = <3000000>;
+	};
+};
+
+/* The DM3730 has a faster L3 than OMAP35, so increase pixel clock */
+&mt9p031_out {
+	pixel-clock-frequency = <90000000>;
+};
+
+&omap3_pmx_core {
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_core2_pins: pinmux_mmc3_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
new file mode 100644
index 000000000..1386a5e63
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+		sysboot2 {
+			label = "sysboot2";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+
+		sysboot5 {
+			label = "sysboot5";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
+			linux,code = <BTN_1>;
+			wakeup-source;
+		};
+
+		gpio1 {
+			label = "gpio1";
+			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
+			linux,code = <BTN_2>;
+			wakeup-source;
+		};
+
+		gpio2 {
+			label = "gpio2";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
+			linux,code = <BTN_3>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;	/* gpio180 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;	/* gpio179 */
+			linux,default-trigger = "none";
+		};
+	};
+
+	pwm10: pwm-10 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer10>;
+		#pwm-cells = <3>;
+		ti,clock-source = <0x01>;
+	};
+
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&hdqw1w {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&vpll2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display {
+		/* This isn't the exact LCD, but the timings meet spec */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+		label = "15";
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pwr_pins>;
+		backlight = <&bl>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;		/* gpio127 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
+		>;
+	};
+
+	hdq_pins: hdq_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
+		>;
+	};
+
+	isp_pins: pinmux_isp_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
+
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
+		>;
+	};
+
+	panel_pwr_pins: pinmux_panel_pwr_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
+		>;
+	};
+
+	mmc1_cd: pinmux_mmc1_cd {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
+		>;
+	};
+};
+
+&i2c2 {
+	mt9p031@48 {
+		compatible = "aptina,mt9p031";
+		reg = <0x48>;
+		clocks = <&isp 0>;
+		vaa-supply = <&vaux4>;
+		vdd-supply = <&vaux4>;
+		vdd_io-supply = <&vaux4>;
+		port {
+			mt9p031_out: endpoint {
+				input-clock-frequency = <24000000>;
+				pixel-clock-frequency = <72000000>;
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mcspi1 {
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};
+};
+
+&isp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&isp_pins>;
+	ports {
+		port@0 {
+			reg = <0>;
+			ccdc_ep: endpoint {
+				remote-endpoint = <&mt9p031_out>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
new file mode 100644
index 000000000..3a5228562
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user0 {
+			label = "user0";
+			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
+			linux,default-trigger = "none";
+		};
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+};
+
+/* The Torpedo doesn't route the USB host pins */
+&usbhshost {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	at24@50 {
+		compatible = "atmel,24c64";
+		readonly;
+		reg = <0x50>;
+	};
+};
+
+&omap3_pmx_core {
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&twl_keypad {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
new file mode 100644
index 000000000..10b8249b8
--- /dev/null
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -0,0 +1,537 @@
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "armv7-m.dtsi"
+
+#include "dt-bindings/clock/lpc18xx-cgu.h"
+#include "dt-bindings/clock/lpc18xx-ccu.h"
+
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-m3";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&ccu1 CLK_CPU_CORE>;
+		};
+	};
+
+	clocks {
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
+		};
+	};
+
+	soc {
+		sct_pwm: pwm@40000000 {
+			compatible = "nxp,lpc1850-sct-pwm";
+			reg = <0x40000000 0x1000>;
+			clocks =<&ccu1 CLK_CPU_SCT>;
+			clock-names = "pwm";
+			resets = <&rgu 37>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		dmac: dma-controller@40002000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x40002000 0x1000>;
+			interrupts = <2>;
+			clocks = <&ccu1 CLK_CPU_DMA>;
+			clock-names = "apb_pclk";
+			resets = <&rgu 19>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb1;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+		};
+
+		spifi: flash-controller@40003000 {
+			compatible = "nxp,lpc1773-spifi";
+			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+			reg-names = "spifi", "flash";
+			interrupts = <30>;
+			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+			clock-names = "spifi", "reg";
+			resets = <&rgu 53>;
+			status = "disabled";
+		};
+
+		mmcsd: mmcsd@40004000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x40004000 0x1000>;
+			interrupts = <6>;
+			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
+			clock-names = "ciu", "biu";
+			resets = <&rgu 20>;
+			status = "disabled";
+		};
+
+		usb0: ehci@40006100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40006100 0x100>;
+			interrupts = <8>;
+			clocks = <&ccu1 CLK_CPU_USB0>;
+			resets = <&rgu 17>;
+			phys = <&usb0_otg_phy>;
+			phy-names = "usb";
+			has-transaction-translator;
+			status = "disabled";
+		};
+
+		usb1: ehci@40007100 {
+			compatible = "nxp,lpc1850-ehci", "generic-ehci";
+			reg = <0x40007100 0x100>;
+			interrupts = <9>;
+			clocks = <&ccu1 CLK_CPU_USB1>;
+			resets = <&rgu 18>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@40005000 {
+			compatible = "arm,pl172", "arm,primecell";
+			reg = <0x40005000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+			clock-names = "mpmcclk", "apb_pclk";
+			resets = <&rgu 21>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x1c000000 0x1000000
+				  1 0 0x1d000000 0x1000000
+				  2 0 0x1e000000 0x1000000
+				  3 0 0x1f000000 0x1000000>;
+			status = "disabled";
+		};
+
+		lcdc: lcd-controller@40008000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x40008000 0x1000>;
+			interrupts = <7>;
+			interrupt-names = "combined";
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			resets = <&rgu 16>;
+			status = "disabled";
+		};
+
+		eeprom: eeprom@4000e000 {
+			compatible = "nxp,lpc1857-eeprom";
+			reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+			reg-names = "reg", "mem";
+			clocks = <&ccu1 CLK_CPU_EEPROM>;
+			clock-names = "eeprom";
+			resets = <&rgu 27>;
+			interrupts = <4>;
+			status = "disabled";
+		};
+
+		mac: ethernet@40010000 {
+			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+			reg = <0x40010000 0x2000>;
+			interrupts = <5>;
+			interrupt-names	= "macirq";
+			clocks = <&ccu1 CLK_CPU_ETHERNET>;
+			clock-names = "stmmaceth";
+			resets = <&rgu 22>;
+			reset-names = "stmmaceth";
+			rx-fifo-depth = <256>;
+			tx-fifo-depth = <256>;
+			snps,pbl = <4>; /* 32 (8x mode) */
+			snps,force_thresh_dma_mode;
+			status = "disabled";
+		};
+
+		creg: syscon@40043000 {
+			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+			reg = <0x40043000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_CREG>;
+			resets = <&rgu 5>;
+
+			creg_clk: clock-controller {
+				compatible = "nxp,lpc1850-creg-clk";
+				clocks = <&xtal32>;
+				#clock-cells = <1>;
+			};
+
+			usb0_otg_phy: phy {
+				compatible = "nxp,lpc1850-usb-otg-phy";
+				clocks = <&ccu1 CLK_USB0>;
+				#phy-cells = <0>;
+			};
+
+			dmamux: dma-mux {
+				compatible = "nxp,lpc1850-dmamux";
+				#dma-cells = <3>;
+				dma-requests = <64>;
+				dma-masters = <&dmac>;
+			};
+		};
+
+		rtc: rtc@40046000 {
+			compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc";
+			reg = <0x40046000 0x1000>;
+			interrupts = <47>;
+			clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "rtc", "reg";
+		};
+
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		ccu1: clock-controller@40051000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40051000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+				 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+				 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+				 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+			clock-names = "base_apb3_clk",   "base_apb1_clk",
+				      "base_spifi_clk",  "base_cpu_clk",
+				      "base_periph_clk", "base_usb0_clk",
+				      "base_usb1_clk",   "base_spi_clk";
+		};
+
+		ccu2: clock-controller@40052000 {
+			compatible = "nxp,lpc1850-ccu";
+			reg = <0x40052000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+				 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+				 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+				 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+			clock-names = "base_audio_clk", "base_uart3_clk",
+				      "base_uart2_clk", "base_uart1_clk",
+				      "base_uart0_clk", "base_ssp1_clk",
+				      "base_ssp0_clk",  "base_sdio_clk";
+		};
+
+		rgu: reset-controller@40053000 {
+			compatible = "nxp,lpc1850-rgu";
+			reg = <0x40053000 0x1000>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "delay", "reg";
+			#reset-cells = <1>;
+		};
+
+		watchdog@40080000 {
+			compatible = "nxp,lpc1850-wwdt";
+			reg = <0x40080000 0x24>;
+			interrupts = <49>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+			clock-names = "wdtclk", "reg";
+		};
+
+		uart0: serial@40081000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x40081000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <24>;
+			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 44>;
+			dmas = <&dmamux  1 1 2
+				&dmamux  2 1 2
+				&dmamux 11 2 2
+				&dmamux 12 2 2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@40082000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x40082000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 45>;
+			dmas = <&dmamux 3 1 2
+				&dmamux 4 1 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ssp0: spi@40083000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x40083000 0x1000>;
+			interrupts = <22>;
+			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 50>;
+			dmas = <&dmamux  9 0 2
+				&dmamux 10 0 2>;
+			dma-names = "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer0: timer@40084000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40084000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu1 CLK_CPU_TIMER0>;
+			clock-names = "timerclk";
+			resets = <&rgu 32>;
+		};
+
+		timer1: timer@40085000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40085000 0x1000>;
+			interrupts = <13>;
+			clocks = <&ccu1 CLK_CPU_TIMER1>;
+			clock-names = "timerclk";
+			resets = <&rgu 33>;
+		};
+
+		pinctrl: pinctrl@40086000 {
+			compatible = "nxp,lpc1850-scu";
+			reg = <0x40086000 0x1000>;
+			clocks = <&ccu1 CLK_CPU_SCU>;
+		};
+
+		i2c0: i2c@400a1000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400a1000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu1 CLK_APB1_I2C0>;
+			resets = <&rgu 48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can1: can@400a4000 {
+			compatible = "bosch,c_can";
+			reg = <0x400a4000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu1 CLK_APB1_CAN1>;
+			resets = <&rgu 54>;
+			status = "disabled";
+		};
+
+		uart2: serial@400c1000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x400c1000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <26>;
+			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 46>;
+			dmas = <&dmamux 5 1 2
+				&dmamux 6 1 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@400c2000 {
+			compatible = "nxp,lpc1850-uart", "ns16550a";
+			reg = <0x400c2000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <27>;
+			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
+			clock-names = "uartclk", "reg";
+			resets = <&rgu 47>;
+			dmas = <&dmamux  7 1 2
+				&dmamux  8 1 2
+				&dmamux 13 3 2
+				&dmamux 14 3 2>;
+			dma-names = "tx", "rx", "rx", "tx";
+			status = "disabled";
+		};
+
+		timer2: timer@400c3000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&ccu1 CLK_CPU_TIMER2>;
+			clock-names = "timerclk";
+			resets = <&rgu 34>;
+		};
+
+		timer3: timer@400c4000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c4000 0x1000>;
+			interrupts = <15>;
+			clocks = <&ccu1 CLK_CPU_TIMER3>;
+			clock-names = "timerclk";
+			resets = <&rgu 35>;
+		};
+
+		ssp1: spi@400c5000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x400c5000 0x1000>;
+			interrupts = <23>;
+			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
+			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 51>;
+			dmas = <&dmamux 11 2 2
+				&dmamux 12 2 2
+				&dmamux  3 3 2
+				&dmamux  4 3 2
+				&dmamux  5 2 2
+				&dmamux  6 2 2
+				&dmamux 13 2 2
+				&dmamux 14 2 2>;
+			dma-names = "rx", "tx", "tx", "rx",
+				    "tx", "rx", "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@400e0000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400e0000 0x1000>;
+			interrupts = <19>;
+			clocks = <&ccu1 CLK_APB3_I2C1>;
+			resets = <&rgu 49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dac: dac@400e1000 {
+			compatible = "nxp,lpc1850-dac";
+			reg = <0x400e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&ccu1 CLK_APB3_DAC>;
+			resets = <&rgu 42>;
+			status = "disabled";
+		};
+
+		can0: can@400e2000 {
+			compatible = "bosch,c_can";
+			reg = <0x400e2000 0x1000>;
+			interrupts = <51>;
+			clocks = <&ccu1 CLK_APB3_CAN0>;
+			resets = <&rgu 55>;
+			status = "disabled";
+		};
+
+		adc0: adc@400e3000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e3000 0x1000>;
+			interrupts = <17>;
+			clocks = <&ccu1 CLK_APB3_ADC0>;
+			resets = <&rgu 40>;
+			status = "disabled";
+		};
+
+		adc1: adc@400e4000 {
+			compatible = "nxp,lpc1850-adc";
+			reg = <0x400e4000 0x1000>;
+			interrupts = <21>;
+			clocks = <&ccu1 CLK_APB3_ADC1>;
+			resets = <&rgu 41>;
+			status = "disabled";
+		};
+
+		gpio: gpio@400f4000 {
+			compatible = "nxp,lpc1850-gpio";
+			reg = <0x400f4000 0x4000>;
+			clocks = <&ccu1 CLK_CPU_GPIO>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+					<&pinctrl LPC_GPIO(0,4)  LPC_PIN(1,0)  1>,
+					<&pinctrl LPC_GPIO(0,8)  LPC_PIN(1,1)  4>,
+					<&pinctrl LPC_GPIO(1,8)  LPC_PIN(1,5)  2>,
+					<&pinctrl LPC_GPIO(1,0)  LPC_PIN(1,7)  8>,
+					<&pinctrl LPC_GPIO(0,2)  LPC_PIN(1,15) 2>,
+					<&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>,
+					<&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>,
+					<&pinctrl LPC_GPIO(5,0)  LPC_PIN(2,0)  7>,
+					<&pinctrl LPC_GPIO(0,7)  LPC_PIN(2,7)  1>,
+					<&pinctrl LPC_GPIO(5,7)  LPC_PIN(2,8)  1>,
+					<&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9)  1>,
+					<&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>,
+					<&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>,
+					<&pinctrl LPC_GPIO(5,8)  LPC_PIN(3,1)  2>,
+					<&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4)  2>,
+					<&pinctrl LPC_GPIO(0,6)  LPC_PIN(3,6)  1>,
+					<&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7)  2>,
+					<&pinctrl LPC_GPIO(2,0)  LPC_PIN(4,0)  7>,
+					<&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8)  3>,
+					<&pinctrl LPC_GPIO(2,9)  LPC_PIN(5,0)  7>,
+					<&pinctrl LPC_GPIO(2,7)  LPC_PIN(5,7)  1>,
+					<&pinctrl LPC_GPIO(3,0)  LPC_PIN(6,1)  5>,
+					<&pinctrl LPC_GPIO(0,5)  LPC_PIN(6,6)  1>,
+					<&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7)  2>,
+					<&pinctrl LPC_GPIO(3,5)  LPC_PIN(6,9)  3>,
+					<&pinctrl LPC_GPIO(2,8)  LPC_PIN(6,12) 1>,
+					<&pinctrl LPC_GPIO(3,8)  LPC_PIN(7,0)  8>,
+					<&pinctrl LPC_GPIO(4,0)  LPC_PIN(8,0)  8>,
+					<&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0)  4>,
+					<&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4)  2>,
+					<&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6)  1>,
+					<&pinctrl LPC_GPIO(4,8)  LPC_PIN(a,1)  3>,
+					<&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4)  1>,
+					<&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0)  7>,
+					<&pinctrl LPC_GPIO(6,0)  LPC_PIN(c,1) 14>,
+					<&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>,
+					<&pinctrl LPC_GPIO(7,0)  LPC_PIN(e,0) 16>,
+					<&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1)  3>,
+					<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
new file mode 100644
index 000000000..63c6f17bb
--- /dev/null
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+	compatible = "ea,ea3250", "nxp,lpc3250";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button {
+			label = "Interrupt Key";
+			linux,code = <103>;
+			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+		};
+
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
+	};
+};
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
+		dac-clk = "wspll";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2d {
+		compatible = "nxp,isp1301";
+		reg = <0x2d>;
+	};
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+	status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&pca9532 5 0>;
+	cd-gpios = <&pca9532 4 0>;
+	cd-inverted;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <260000000>;
+	nxp,whold = <104000000>;
+	nxp,wsetup = <200000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <34666666>;
+	nxp,rhold = <104000000>;
+	nxp,rsetup = <200000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@0 {
+			label = "ea3250-boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		mtd1@80000 {
+			label = "ea3250-uboot";
+			reg = <0x00080000 0x000c0000>;
+			read-only;
+		};
+
+		mtd2@140000 {
+			label = "ea3250-kernel";
+			reg = <0x00140000 0x00400000>;
+		};
+
+		mtd3@540000 {
+			label = "ea3250-rootfs";
+			reg = <0x00540000 0x07ac0000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
new file mode 100644
index 000000000..21a6d0bca
--- /dev/null
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+			default-state = "off";
+		};
+
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		compatible = "sharp,lq035q7db03";
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&cldc_output>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio 5 4 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio 5 0 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_sd: regulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 5 5 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&clcd {
+	max-memory-bandwidth = <18710000>;
+	status = "okay";
+
+	port {
+		cldc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 3 10 0>;
+		reset-gpio = <&gpio 3 2 0>;
+		dac-clk = "wspll";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+};
+
+&key {
+	keypad,num-rows = <1>;
+	keypad,num-columns = <1>;
+	nxp,debounce-delay-ms = <3>;
+	nxp,scan-delay-ms = <34>;
+	linux,keymap = <0x00000002>;
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+	status = "okay";
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&gpio 3 0 0>;
+	cd-gpios = <&gpio 3 1 0>;
+	cd-inverted;
+	bus-width = <4>;
+	vmmc-supply = <&reg_sd>;
+	status = "okay";
+};
+
+/* 64MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <40000000>;
+	nxp,whold = <100000000>;
+	nxp,wsetup = <100000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <40000000>;
+	nxp,rhold = <66666666>;
+	nxp,rsetup = <100000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@0 {
+			label = "phy3250-boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		mtd1@64000 {
+			label = "phy3250-uboot";
+			reg = <0x00064000 0x00190000>;
+			read-only;
+		};
+
+		mtd2@1f4000 {
+			label = "phy3250-ubt-prms";
+			reg = <0x001f4000 0x00010000>;
+		};
+
+		mtd3@204000 {
+			label = "phy3250-kernel";
+			reg = <0x00204000 0x00400000>;
+		};
+
+		mtd4@604000 {
+			label = "phy3250-rootfs";
+			reg = <0x00604000 0x039fc000>;
+		};
+	};
+};
+
+&ssp0 {
+	num-cs = <1>;
+	cs-gpios = <&gpio 3 5 0>;
+	status = "okay";
+
+	eeprom: at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+
+		pl022,interface = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+	};
+};
+
+&tsc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
new file mode 100644
index 000000000..824393e1b
--- /dev/null
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ */
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "nxp,lpc3220";
+	interrupt-parent = <&mic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		xtal_32k: xtal_32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xtal_32k";
+		};
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <13000000>;
+			clock-output-names = "xtal";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x00000000 0x10000000>,
+			 <0x20000000 0x20000000 0x30000000>,
+			 <0xe0000000 0xe0000000 0x04000000>;
+
+		iram: sram@8000000 {
+			compatible = "mmio-sram";
+			reg = <0x08000000 0x20000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x08000000 0x20000>;
+		};
+
+		/*
+		 * Enable either SLC or MLC
+		 */
+		slc: flash@20020000 {
+			compatible = "nxp,lpc3220-slc";
+			reg = <0x20020000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_SLC>;
+			status = "disabled";
+		};
+
+		mlc: flash@200a8000 {
+			compatible = "nxp,lpc3220-mlc";
+			reg = <0x200a8000 0x11000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MLC>;
+			status = "disabled";
+		};
+
+		dma: dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_DMA>;
+			clock-names = "apb_pclk";
+		};
+
+		usb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x31020000 0x00001000>;
+
+			/*
+			 * Enable either ohci or usbd (gadget)!
+			 */
+			ohci: ohci@0 {
+				compatible = "nxp,ohci-nxp", "usb-ohci";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+				status = "disabled";
+			};
+
+			usbd: usbd@0 {
+				compatible = "nxp,lpc3220-udc";
+				reg = <0x0 0x300>;
+				interrupt-parent = <&sic1>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+					     <30 IRQ_TYPE_LEVEL_HIGH>,
+					     <28 IRQ_TYPE_LEVEL_HIGH>,
+					     <26 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+				status = "disabled";
+			};
+
+			i2cusb: i2c@300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x300 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			usbclk: clock-controller@f00 {
+				compatible = "nxp,lpc3220-usb-clk";
+				reg = <0xf00 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		clcd: clcd@31040000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MAC>;
+			status = "disabled";
+		};
+
+		emc: memory-controller@31080000 {
+			compatible = "arm,pl175", "arm,primecell";
+			reg = <0x31080000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+			clock-names = "mpmcclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe0000000 0x01000000>,
+				 <1 0xe1000000 0x01000000>,
+				 <2 0xe2000000 0x01000000>,
+				 <3 0xe3000000 0x01000000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * ssp0 and spi1 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
+			ssp0: spi@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP0>;
+				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20088000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * ssp1 and spi2 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
+			ssp1: spi@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP1>;
+				clock-names = "apb_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20090000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x20094000 0x1000>;
+				status = "disabled";
+			};
+
+			sd: sd@20098000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SD>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@2009c000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x2009c000 0x1000>;
+				status = "disabled";
+			};
+
+			/* UART5 first since it is the default console, ttyS0 */
+			uart5: serial@40090000 {
+				/* actually, ns16550a w/ 64 byte fifos! */
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40090000 0x1000>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART5>;
+				status = "disabled";
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40080000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART3>;
+				status = "disabled";
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40088000 0x1000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART4>;
+				status = "disabled";
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40098000 0x1000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART6>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@400a0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400a0000 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C1>;
+			};
+
+			i2c2: i2c@400a8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400a8000 0x100>;
+				interrupt-parent = <&sic1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C2>;
+			};
+
+			mpwm: mpwm@400e8000 {
+				compatible = "nxp,lpc3220-motor-pwm";
+				reg = <0x400e8000 0x78>;
+				status = "disabled";
+				#pwm-cells = <2>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/* System Control Block */
+			scb {
+				compatible = "simple-bus";
+				ranges = <0x0 0x040004000 0x00001000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				clk: clock-controller@0 {
+					compatible = "nxp,lpc3220-clk";
+					reg = <0x00 0x114>;
+					#clock-cells = <1>;
+
+					clocks = <&xtal_32k>, <&xtal>;
+					clock-names = "xtal_32k", "xtal";
+				};
+			};
+
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc3220-mic";
+				reg = <0x40008000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sic1: interrupt-controller@4000c000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x4000c000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+					     <30 IRQ_TYPE_LEVEL_LOW>;
+				};
+
+			sic2: interrupt-controller@40010000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x40010000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+					     <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40014000 0x1000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40018000 0x1000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			uart7: serial@4001c000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x4001c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			rtc: rtc@40024000 {
+				compatible = "nxp,lpc3220-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_RTC>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc3220-gpio";
+				reg = <0x40028000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <3>; /* bank, pin, flags */
+			};
+
+			timer4: timer@4002c000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER4>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			timer5: timer@40030000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40030000 0x1000>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER5>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@4003c000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003c000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_WDOG>;
+			};
+
+			timer0: timer@40044000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40044000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_TIMER0>;
+				clock-names = "timerclk";
+				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";' for one of
+			 * them
+			 */
+
+			adc: adc@40048000 {
+				compatible = "nxp,lpc3220-adc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
+				status = "disabled";
+			};
+
+			tsc: tsc@40048000 {
+				compatible = "nxp,lpc3220-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
+				status = "disabled";
+			};
+
+			timer1: timer@4004c000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4004c000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER1>;
+				clock-names = "timerclk";
+			};
+
+			key: key@40050000 {
+				compatible = "nxp,lpc3220-key";
+				reg = <0x40050000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_KEY>;
+				interrupt-parent = <&sic1>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer2: timer@40058000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40058000 0x1000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER2>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			pwm1: pwm@4005c000 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005c000 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@4005c004 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005c004 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
+				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
+				status = "disabled";
+			};
+
+			timer3: timer@40060000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40060000 0x1000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER3>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
new file mode 100644
index 000000000..beddaba85
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -0,0 +1,221 @@
+/*
+ * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar)
+ *
+ * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "CIAA NXP LPC4337";
+	compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart2;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x0800000>; /* 8 MB */
+	};
+};
+
+&pinctrl {
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "p7_7";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	ssp_pins: ssp-pins {
+		ssp1_cs {
+			pins = "p6_7";
+			function = "gpio";
+			bias-pull-up;
+			bias-disable;
+		};
+
+		ssp1_miso_mosi {
+			pins = "p1_3", "p1_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp1_sck {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rx_cfg {
+			pins = "p7_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+		};
+
+		uart2_tx_cfg {
+			pins = "p7_1";
+			function = "uart2";
+			bias-disable;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-disable;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "microchip,24c512", "atmel,24c512";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	eeprom@54 {
+		compatible = "microchip,24c512", "atmel,24c512";
+		reg = <0x54>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&sct_pwm {
+	status = "okay";
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp_pins>;
+	cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>;
+	num-cs = <1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
new file mode 100644
index 000000000..93d0c2e99
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -0,0 +1,481 @@
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "Hitex LPC4350 Evaluation Board";
+	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x800000>; /* 8 MB */
+	};
+
+	pca_buttons {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy:right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy:up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+
+		button2 {
+			label = "joy:enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy:left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy:down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button5 {
+			label = "user:sw3";
+			linux,code = <KEY_F1>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button6 {
+			label = "user:sw4";
+			linux,code = <KEY_F2>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button7 {
+			label = "user:sw5";
+			linux,code = <KEY_F3>;
+			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pca_leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ext:led0";
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "ext:led1";
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			label = "ext:led2";
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "ext:led3";
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	adc1_pins: adc1-pins {
+		adc1_pins_cfg {
+			pins = "pf_9";
+			function = "adc";
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_cs2_cfg {
+			pins = "p1_5", "pd_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_mii_pins: enet-mii-pins {
+		enet_mii_rxd0_3_cfg {
+			pins = "p1_15", "p0_0", "p9_3", "p9_2";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_txd0_3_cfg {
+			pins = "p1_18", "p1_20", "p9_4", "p9_5";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_mii_crs_col_cfg {
+			pins = "p9_0", "p9_6";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_rx_clk_dv_er_cfg {
+			pins = "pc_0", "p1_16", "p9_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mii_tx_clk_en_cfg {
+			pins = "p1_19", "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2C0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <30>;
+		mpmc,read-access-delay = <90>;
+		mpmc,page-mode-read-delay = <55>;
+		mpmc,write-access-delay = <55>;
+		mpmc,turn-round-delay = <55>;
+
+		ext_sram: sram@2,0 {
+			compatible = "mmio-sram";
+			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <25000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor@18 {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,24c02", "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	pca_gpio: gpio@24 {
+		compatible = "nxp,pca9673";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_mii_pins>;
+};
+
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x000000 0x040000>; /* 256 KiB */
+		};
+
+		partition@1 {
+			label = "kernel";
+			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+		};
+
+		partition@2 {
+			label = "rootfs";
+			reg = <0x300000 0x500000>; /* 5 MiB */
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/lpc4350.dtsi
new file mode 100644
index 000000000..c4422f587
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4350.dtsi
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
new file mode 100644
index 000000000..224f80a4a
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -0,0 +1,623 @@
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+	model = "Embedded Artists' LPC4357 Developer's Kit";
+	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>; /* 32 MB */
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* vmmc is controlled by sdmmc host internally */
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio_joystick {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_joystick_pins>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button0 {
+			label = "joy_enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+		};
+
+		button1 {
+			label = "joy_left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "joy_up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "joy_right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
+		};
+
+		button4 {
+			label = "joy_down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds_mmio {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5 {
+			gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led6 {
+			gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led7 {
+			gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led8 {
+			gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led9 {
+			gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led10 {
+			gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led11 {
+			gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led12 {
+			gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led13 {
+			gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led14 {
+			gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led15 {
+			gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led16 {
+			gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	emc_pins: emc-pins {
+		emc_addr0_23_cfg {
+			pins =	"p2_9",  "p2_10", "p2_11", "p2_12",
+				"p2_13", "p1_0",  "p1_1",  "p1_2",
+				"p2_8",  "p2_7",  "p2_6",  "p2_2",
+				"p2_1",  "p2_0",  "p6_8",  "p6_7",
+				"pd_16", "pd_15", "pe_0",  "pe_1",
+				"pe_2",  "pe_3",  "pe_4",  "pa_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_data0_31_cfg {
+			pins =	"p1_7",  "p1_8",  "p1_9",  "p1_10",
+				"p1_11", "p1_12", "p1_13", "p1_14",
+				"p5_4",  "p5_5",  "p5_6",  "p5_7",
+				"p5_0",  "p5_1",  "p5_2",  "p5_3",
+				"pd_2",  "pd_3",  "pd_4",  "pd_5",
+				"pd_6",  "pd_7",  "pd_8",  "pd_9",
+				"pe_5",  "pe_6",  "pe_7",  "pe_8",
+				"pe_9",  "pe_10", "pe_11", "pe_12";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_bls0_3_cfg {
+			pins = "p1_4", "p6_6", "pd_13", "pd_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_cs0_3_cfg {
+			pins = "p1_5", "p6_3", "pd_12", "pd_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dqm0_3_cfg {
+			pins = "p6_12", "p6_10", "pd_0", "pe_13";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0", "clk1", "clk2", "clk3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
+	gpio_joystick_pins: gpio-joystick-pins {
+		gpio_joystick_cfg {
+			pins =	"p9_0", "p9_1", "pa_1", "pa_2", "pa_3";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			bias-pull-down;
+			input-enable;
+		};
+
+		sdmmc_pow_cfg {
+			pins = "pc_9";
+			function = "sdmmc";
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <0>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp0_pins: ssp0-pins {
+		ssp0_sck_miso_mosi {
+			pins = "pf_0", "pf_2", "pf_3";
+			function = "ssp0";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp0_ssel {
+			pins = "pf_1";
+			function = "ssp0";
+			bias-pull-up;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			input-schmitt-disable;
+			bias-disable;
+			input-enable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p9_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable {
+			pins = "p2_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	mma7455@1d {
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+	};
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@57 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&dac {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x000000 0x040000>; /* 256 KiB */
+			};
+
+			partition@1 {
+				label = "kernel";
+				reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+			};
+
+			partition@2 {
+				label = "rootfs";
+				reg = <0x300000 0x100000>; /* 1 MiB */
+			};
+		};
+	};
+
+	cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <2>;
+		mpmc,memory-width = <16>;
+
+		mmio_leds: gpio@2,0 {
+			compatible = "ti,7416374";
+			reg = <2 0 0x2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+};
+
+&mmcsd {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+};
+
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
+&ssp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp0_pins>;
+	num-cs = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
new file mode 100644
index 000000000..1f84654df
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MYIR Tech LPC4357 Development Board";
+	compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@28000000 {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led5 {
+			gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led6 {
+			gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+
+	vcc: vcc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vmmc: vmmc_fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&pinctrl {
+	can0_pins: can0-pins {
+		can_rd_cfg {
+			pins = "p3_1";
+			function = "can0";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "p3_2";
+			function = "can0";
+		};
+	};
+
+	can1_pins: can1-pins {
+		can_rd_cfg {
+			pins = "pe_1";
+			function = "can1";
+			input-enable;
+		};
+
+		can_td_cfg {
+			pins = "pe_0";
+			function = "can1";
+		};
+	};
+
+	emc_pins: emc-pins {
+		emc_addr0_22_cfg {
+			pins = "p2_9",  "p2_10", "p2_11", "p2_12",
+			       "p2_13", "p1_0",  "p1_1",  "p1_2",
+			       "p2_8",  "p2_7",  "p2_6",  "p2_2",
+			       "p2_1",  "p2_0",  "p6_8",  "p6_7",
+			       "pd_16", "pd_15", "pe_0",  "pe_1",
+			       "pe_2",  "pe_3",  "pe_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_data0_15_cfg {
+			pins = "p1_7",  "p1_8",  "p1_9",  "p1_10",
+			       "p1_11", "p1_12", "p1_13", "p1_14",
+			       "p5_4",  "p5_5",  "p5_6",  "p5_7",
+			       "p5_0",  "p5_1",  "p5_2",  "p5_3";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_we_oe_cfg {
+			pins = "p1_6", "p1_3";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_cs0_cfg {
+			pins = "p1_5";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dqm0_1_cfg {
+			pins = "p6_12", "p6_10";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_ras_cas_cfg {
+			pins = "p6_5", "p6_4";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_dycs0_cfg {
+			pins = "p6_9";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_cke_cfg {
+			pins = "p6_11";
+			function = "emc";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		emc_sdram_clock_cfg {
+			pins = "clk0";
+			function = "emc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+	};
+
+	enet_rmii_pins: enet-rmii-pins {
+		enet_rmii_rxd_cfg {
+			pins = "p1_15", "p0_0";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_txd_cfg {
+			pins = "p1_18", "p1_20";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_rx_dv_cfg {
+			pins = "p1_16";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdio_cfg {
+			pins = "p1_17";
+			function = "enet";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		enet_mdc_cfg {
+			pins = "pc_1";
+			function = "enet";
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		enet_rmii_tx_en_cfg {
+			pins = "p0_1";
+			function = "enet";
+			bias-disable;
+		};
+
+		enet_ref_clk_cfg {
+			pins = "p1_19";
+			function = "enet";
+			slew-rate = <1>;
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		i2c1_pins_cfg {
+			pins = "pe_15", "pe_13";
+			function = "i2c1";
+			input-enable;
+		};
+	};
+
+	lcd_pins: lcd-pins {
+		lcd_vd0_23_cfg {
+			pins = "p4_1", "p4_4", "p4_3",  "p4_2",
+			       "p8_7", "p8_6", "p8_5",  "p8_4",
+			       "p7_5", "p4_8", "p4_10", "p4_9",
+			       "p8_3", "pb_6", "pb_5",  "pb_4",
+			       "p7_4", "p7_3", "p7_2",  "p7_1",
+			       "pb_3", "pb_2", "pb_1",  "pb_0";
+			function = "lcd";
+		};
+
+		lcd_vsync_en_dclk_lp_pwr_cfg {
+			pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+			function = "lcd";
+		};
+	};
+
+	led_pins: led-pins {
+		led_1_6_cfg {
+			pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	sdmmc_pins: sdmmc-pins {
+		sdmmc_clk_cfg {
+			pins = "pc_0";
+			function = "sdmmc";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		sdmmc_cmd_dat0_3_cfg {
+			pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+			function = "sdmmc";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		sdmmc_cd_cfg {
+			pins = "pc_8";
+			function = "sdmmc";
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_sck_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_mosi_miso_sio2_sio3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp1_pins: ssp1-pins {
+		ssp1_sck_cfg {
+			pins = "pf_4";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_miso_cfg {
+			pins = "pf_6";
+			function = "ssp1";
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_mosi_cfg {
+			pins = "pf_7";
+			function = "ssp1";
+			slew-rate = <1>;
+			bias-pull-down;
+		};
+
+		ssp1_ssel_cfg {
+			pins = "pf_5";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rxd_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			input-enable;
+			input-schmitt-disable;
+			bias-disable;
+		};
+
+		uart0_clk_dir_txd_cfg {
+			pins = "pf_8", "pf_9", "pf_10";
+			function = "uart0";
+			bias-pull-down;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		uart1_rxd_cfg {
+			pins = "pc_14";
+			function = "uart1";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart1_dtr_txd_cfg {
+			pins = "pc_12", "pc_13";
+			function = "uart1";
+			bias-pull-down;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		uart2_rxd_cfg {
+			pins = "pa_2";
+			function = "uart2";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart2_txd_cfg {
+			pins = "pa_1";
+			function = "uart2";
+			bias-pull-down;
+		};
+	};
+
+	uart3_pins: uart3-pins {
+		uart3_rx_cfg {
+			pins = "p2_4";
+			function = "uart3";
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		uart3_tx_cfg {
+			pins = "p2_3";
+			function = "uart3";
+			bias-pull-down;
+		};
+	};
+
+	usb0_pins: usb0-pins {
+		usb0_pwr_enable_cfg {
+			pins = "p6_3";
+			function = "usb0";
+		};
+
+		usb0_pwr_fault_cfg {
+			pins = "p8_0";
+			function = "usb0";
+			bias-disable;
+			input-enable;
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&vcc>;
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emc_pins>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-access-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		/* SST/Microchip SST39VF1601 */
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+		};
+	};
+};
+
+&enet_tx_clk {
+	clock-frequency = <50000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	sensor@49 {
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	max-memory-bandwidth = <92240000>;
+
+	port {
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&enet_rmii_pins>;
+	phy-handle = <&phy1>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&mmcsd {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	/* Atmel AT25DF321A */
+	flash {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <51000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_pins>;
+	num-cs = <1>;
+	cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+};
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
new file mode 100644
index 000000000..72f12db8d
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -0,0 +1,43 @@
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4357";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
+
+&eeprom {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
new file mode 100644
index 000000000..f3ddea934
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/
+ *
+ * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
+ *         Jimmy Chen (陳永達)    <jimmy.chen@moxa.com>
+ *         SZ Lin (林上智)        <sz.lin@moxa.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ls1021a.dtsi"
+
+/ {
+	model = "Moxa UC-8410A";
+	compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy0;
+		enet1_rgmii_phy = &rgmii_phy1;
+		enet2_rgmii_phy = &rgmii_phy2;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		  compatible = "regulator-fixed";
+		  regulator-name = "3P3V";
+		  regulator-min-microvolt = <3300000>;
+		  regulator-max-microvolt = <3300000>;
+		  regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		cel-pwr {
+			label = "UC8410A:CEL-PWR";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		cel-reset {
+			label = "UC8410A:CEL-RESET";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		str-led {
+			label = "UC8410A:RED:PROG";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		sw-ready {
+			label = "UC8410A:GREEN:SWRDY";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		beeper {
+			label = "UC8410A:BEEP";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led0 {
+			label = "UC8410A:GREEN:PROG2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led1 {
+			label = "UC8410A:GREEN:PROG1";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led2 {
+			label = "UC8410A:GREEN:PROG0";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal0 {
+			label = "UC8410A:GREEN:CEL2";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal1 {
+			label = "UC8410A:GREEN:CEL1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal2 {
+			label = "UC8410A:GREEN:CEL0";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-red {
+			label = "UC8410A:RED:DIA";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-green {
+			label = "UC8410A:GREEN:DIA";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-yellow {
+			label = "UC8410A:YELLOW:DIA";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pushbtn-key {
+			label = "push button key";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			default-state = "on";
+		};
+	};
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet1 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tpm@20 {
+		compatible = "infineon,slb9635tt";
+		reg = <0x20>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "marvell,88e1118";
+		reg = <0x0>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "marvell,88e1118";
+		reg = <0x1>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		compatible = "marvell,88e1118";
+		reg = <0x2>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl064l", "spansion,s25fl164k";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+
+		partitions@0 {
+			label = "U-Boot";
+			reg = <0x0 0x180000>;
+		};
+
+		partitions@180000 {
+			label = "U-Boot Env";
+			reg = <0x180000 0x680000>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
new file mode 100644
index 000000000..74a676048
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -0,0 +1,361 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+	compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ds3232: rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@2a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0x2a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+
+		mdio-mux-emi1 {
+			compatible = "mdio-mux-mmioreg";
+			mdio-parent-bus = <&mdio0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x54 1>; /* BRDCFG4 */
+			mux-mask = <0xe0>; /* EMI1[2:0] */
+
+			/* Onboard PHYs */
+			ls1021amdio0: mdio@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			ls1021amdio1: mdio@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			ls1021amdio2: mdio@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			ls1021amdio3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+			};
+
+			ls1021amdio4: mdio@80 {
+				reg = <0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
new file mode 100644
index 000000000..aca78b5ed
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2016-2018 NXP Semiconductors
+ * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "NXP LS1021A-TSN Board";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_vdda_codec: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_codec: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	/* ADG704BRMZ 1:4 SPI mux/demux */
+	sja1105: ethernet-switch@1 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,sja1105t";
+		/* 12 MHz */
+		spi-max-frequency = <12000000>;
+		/* Sample data on trailing clock edge */
+		spi-cpha;
+		/* SPI controller settings for SJA1105 timing requirements */
+		fsl,spi-cs-sck-delay = <1000>;
+		fsl,spi-sck-cs-delay = <1000>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				/* ETH5 written on chassis */
+				label = "swp5";
+				phy-handle = <&rgmii_phy6>;
+				phy-mode = "rgmii-id";
+				reg = <0>;
+			};
+
+			port@1 {
+				/* ETH2 written on chassis */
+				label = "swp2";
+				phy-handle = <&rgmii_phy3>;
+				phy-mode = "rgmii-id";
+				reg = <1>;
+			};
+
+			port@2 {
+				/* ETH3 written on chassis */
+				label = "swp3";
+				phy-handle = <&rgmii_phy4>;
+				phy-mode = "rgmii-id";
+				reg = <2>;
+			};
+
+			port@3 {
+				/* ETH4 written on chassis */
+				label = "swp4";
+				phy-handle = <&rgmii_phy5>;
+				phy-mode = "rgmii-id";
+				reg = <3>;
+			};
+
+			port@4 {
+				/* Internal port connected to eth2 */
+				ethernet = <&enet2>;
+				phy-mode = "rgmii";
+				reg = <4>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+/* RGMII delays added via PCB traces */
+&enet2 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* 3 axis accelerometer */
+	accelerometer@1e {
+		compatible = "fsl,fxls8471";
+		position = <0>;
+		reg = <0x1e>;
+	};
+
+	/* Audio codec (SAI2) */
+	audio-codec@2a {
+		compatible = "fsl,sgtl5000";
+		VDDIO-supply = <&reg_vddio_codec>;
+		VDDA-supply = <&reg_vdda_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&sys_mclk>;
+		reg = <0x2a>;
+	};
+
+	/* Current sensing circuit for 1V VDDCORE PMIC rail */
+	current-sensor@44 {
+		compatible = "ti,ina220";
+		shunt-resistor = <1000>;
+		reg = <0x44>;
+	};
+
+	/* Current sensing circuit for 12V VCC rail */
+	current-sensor@45 {
+		compatible = "ti,ina220";
+		shunt-resistor = <1000>;
+		reg = <0x45>;
+	};
+
+	/* Thermal monitor - case */
+	temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	/* Thermal monitor - chip */
+	temperature-sensor@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+	};
+
+	/* Unsupported devices:
+	 * - FXAS21002C Gyroscope at 0x20
+	 * - TI ADS7924 4-channel ADC at 0x49
+	 */
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart3 {
+	status = "okay";
+};
+
+&mdio0 {
+	/* AR8031 */
+	sgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+		/* SGMII1_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* AR8031 */
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+		/* SGMII2_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* BCM5464 quad PHY */
+	rgmii_phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	rgmii_phy4: ethernet-phy@4 {
+		reg = <0x4>;
+	};
+
+	rgmii_phy5: ethernet-phy@5 {
+		reg = <0x5>;
+	};
+
+	rgmii_phy6: ethernet-phy@6 {
+		reg = <0x6>;
+	};
+
+	/* SGMII PCS for enet0 */
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	/* SGMII PCS for enet1 */
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "RCW";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "U-Boot";
+				reg = <0x40000 0x300000>;
+			};
+
+			partition@340000 {
+				label = "U-Boot Env";
+				reg = <0x340000 0x100000>;
+			};
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
new file mode 100644
index 000000000..5edf001f6
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -0,0 +1,289 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: s25fl064k@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl064k";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	ina220@41 {
+		compatible = "ti,ina220";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&esdhc {
+        status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
new file mode 100644
index 000000000..37026b2fa
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -0,0 +1,1021 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "fsl,ls1021a";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		crypto = &crypto;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		rtc1 = &ftm_alarm0;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		serial5 = &lpuart5;
+		sysclk = &sysclk;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "soc";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		gic: interrupt-controller@1400000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x1401000 0x0 0x1000>,
+			      <0x0 0x1402000 0x0 0x2000>,
+			      <0x0 0x1404000 0x0 0x2000>,
+			      <0x0 0x1406000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		};
+
+		msi1: msi-controller@1570e00 {
+			compatible = "fsl,ls1021a-msi";
+			reg = <0x0 0x1570e00 0x0 0x8>;
+			msi-controller;
+			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1570e08 {
+			compatible = "fsl,ls1021a-msi";
+			reg = <0x0 0x1570e08 0x0 0x8>;
+			msi-controller;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1021a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+			      <0x0 0x40000000 0x0 0x20000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x0 0x20220520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1021a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1021a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <7>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg		 = <0x0 0x1700000 0x0 0x100000>;
+			ranges		 = <0x0 0x0 0x1700000 0x100000>;
+			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1021a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+			fsl,tmu-calibration = <0x00000000 0x0000000f
+					       0x00000001 0x00000017
+					       0x00000002 0x0000001e
+					       0x00000003 0x00000026
+					       0x00000004 0x0000002e
+					       0x00000005 0x00000035
+					       0x00000006 0x0000003d
+					       0x00000007 0x00000044
+					       0x00000008 0x0000004c
+					       0x00000009 0x00000053
+					       0x0000000a 0x0000005b
+					       0x0000000b 0x00000064
+
+					       0x00010000 0x00000011
+					       0x00010001 0x0000001c
+					       0x00010002 0x00000024
+					       0x00010003 0x0000002b
+					       0x00010004 0x00000034
+					       0x00010005 0x00000039
+					       0x00010006 0x00000042
+					       0x00010007 0x0000004c
+					       0x00010008 0x00000051
+					       0x00010009 0x0000005a
+					       0x0001000a 0x00000063
+
+					       0x00020000 0x00000013
+					       0x00020001 0x00000019
+					       0x00020002 0x00000024
+					       0x00020003 0x0000002c
+					       0x00020004 0x00000035
+					       0x00020005 0x0000003d
+					       0x00020006 0x00000046
+					       0x00020007 0x00000050
+					       0x00020008 0x00000059
+
+					       0x00030000 0x00000002
+					       0x00030001 0x0000000d
+					       0x00030002 0x00000019
+					       0x00030003 0x00000024>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart1: serial@21c0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart2: serial@21d0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart3: serial@21d0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		counter0: counter@29d0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter1: counter@29e0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29e0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter2: counter@29f0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29f0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		counter3: counter@2a00000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x2a00000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		pwm0: pwm@29d0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm1: pwm@29e0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29e0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm2: pwm@29f0000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x29f0000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm3: pwm@2a00000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a00000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm4: pwm@2a10000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a10000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm5: pwm@2a20000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a20000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm6: pwm@2a30000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a30000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pwm7: pwm@2a40000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2a40000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				<&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "wdog-en";
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			status = "disabled";
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 1>,
+				 <&clockgen 4 1>;
+		};
+
+		dcu: dcu@2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>,
+				<&clockgen 4 0>;
+			clock-names = "dcu", "pix";
+			big-endian;
+			status = "disabled";
+		};
+
+		mdio0: mdio@2d24000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d24000 0x0 0x4000>,
+			      <0x0 0x2d10030 0x0 0x4>;
+		};
+
+		mdio1: mdio@2d64000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
+		ptp_clock@2d10e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x0 0x2d10e00 0x0 0xb0>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc    = <2>;
+			fsl,tmr-add     = <0xaaaaaaab>;
+			fsl,tmr-fiper1  = <999999995>;
+			fsl,tmr-fiper2  = <999999995>;
+			fsl,max-adj     = <499999999>;
+			fsl,extts-fifo;
+		};
+
+		enet0: ethernet@2d10000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			fsl,magic-packet;
+			ranges;
+			dma-coherent;
+
+			queue-group@2d10000 {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d10000 0x0 0x1000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d14000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d14000 0x0 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet1: ethernet@2d50000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d50000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d50000 0x0 0x1000>;
+				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d54000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d54000 0x0 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		enet2: ethernet@2d90000 {
+			compatible = "fsl,etsec2";
+			device_type = "network";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			model = "eTSEC";
+			ranges;
+			dma-coherent;
+
+			queue-group@2d90000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d90000 0x0 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			queue-group@2d94000  {
+				#address-cells = <2>;
+				#size-cells = <2>;
+				reg = <0x0 0x2d94000 0x0 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		usb2: usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		usb3: usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1021a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			fsl,pcie-scfg = <&scfg 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1021a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,pcie-scfg = <&scfg 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		can0: can@2a70000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a70000 0x0 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+		};
+
+		can1: can@2a80000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a80000 0x0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+		};
+
+		can2: can@2a90000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2a90000 0x0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+		};
+
+		can3: can@2aa0000 {
+			compatible = "fsl,ls1021ar2-flexcan";
+			reg = <0x0 0x2aa0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "ipg", "per";
+			big-endian;
+		};
+
+		ocram1: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x10000000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x10000000 0x10000>;
+		};
+
+		ocram2: sram@10010000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x10010000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x10010000 0x10000>;
+		};
+
+		qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x8>;
+			#fsl,rcpm-wakeup-cells = <2>;
+		};
+
+		ftm_alarm0: timer0@29d0000 {
+			compatible = "fsl,ls1021a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			reg-names = "ftm";
+			fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
new file mode 100644
index 000000000..c928ae312
--- /dev/null
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0xc1100000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1100000 0x200000>;
+
+			hhi: system-controller@4000 {
+				compatible = "amlogic,meson-hhi-sysctrl",
+					     "simple-mfd",
+					     "syscon";
+				reg = <0x4000 0x400>;
+			};
+
+			assist: assist@7c00 {
+				compatible = "amlogic,meson-mx-assist", "syscon";
+				reg = <0x7c00 0x200>;
+			};
+
+			hwrng: rng@8100 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x8100 0x8>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84c0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x84dc 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x8500 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8550 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8650 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x8680 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson6-uart";
+				reg = <0x8700 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x87c0 0x20>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usb0_phy: phy@8800 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8800 0x20>;
+				status = "disabled";
+			};
+
+			usb1_phy: phy@8820 {
+				compatible = "amlogic,meson-mx-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x8820 0x20>;
+				status = "disabled";
+			};
+
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson6-spifc";
+				reg = <0x8c80 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x9880 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@9900 {
+				compatible = "amlogic,meson6-wdt";
+				reg = <0x9900 0x8>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			timer_abcde: timer@9940 {
+				compatible = "amlogic,meson6-timer";
+				reg = <0x9940 0x18>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		L2: cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		periph: bus@c4300000 {
+			compatible = "simple-bus";
+			reg = <0xc4300000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc4300000 0x10000>;
+
+			gic: interrupt-controller@1000 {
+				compatible = "arm,cortex-a9-gic";
+				reg = <0x1000 0x1000>,
+				      <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0xc8100000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8100000 0x100000>;
+
+			ir_receiver: ir-receiver@480 {
+				compatible= "amlogic,meson6-ir";
+				reg = <0x480 0x20>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
+				reg = <0x4c0 0x18>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson6-i2c";
+				reg = <0x500 0x20>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@740 {
+				compatible = "amlogic,meson6-rtc";
+				reg = <0x740 0x14>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		usb0: usb@c9040000 {
+			compatible = "snps,dwc2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc9040000 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c90c0000 {
+			compatible = "snps,dwc2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc90c0000 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0xc9410000 0x10000
+			       0xc1108108 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		ahb_sram: sram@d9000000 {
+			compatible = "mmio-sram";
+			reg = <0xd9000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xd9000000 0x20000>;
+		};
+
+		bootrom: bootrom@d9040000 {
+			compatible = "amlogic,meson-mx-bootrom", "syscon";
+			reg = <0xd9040000 0x10000>;
+		};
+
+		secbus: secbus@da000000 {
+			compatible = "simple-bus";
+			reg = <0xda000000 0x6000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xda000000 0x6000>;
+
+			efuse: nvmem@0 {
+				compatible = "amlogic,meson6-efuse";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
new file mode 100644
index 000000000..98e1c94c0
--- /dev/null
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+/dts-v1/;
+#include "meson6.dtsi"
+
+/ {
+	model = "Geniatech ATV1200";
+	compatible = "geniatech,atv1200", "amlogic,meson6";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
new file mode 100644
index 000000000..4716030a4
--- /dev/null
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson6 SoC";
+	compatible = "amlogic,meson6";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+	};
+
+	apb2: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x40000>;
+	};
+
+	clk81: clk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <200000000>;
+	};
+}; /* end of / */
+
+&efuse {
+	status = "disabled";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clk81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
new file mode 100644
index 000000000..61ec929ab
--- /dev/null
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+	model = "MINIX NEO-X8";
+	compatible = "minix,neo-x8", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "x8:blue:power";
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spi_nor_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25l1606e";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "env";
+			reg = <0x100000 0x10000>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pnictrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
new file mode 100644
index 000000000..0d045add8
--- /dev/null
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1800000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1992000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+		 * code which is responsible for system suspend. It loads a
+		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
+		 * into SRAM, executes that and shuts down the (last) ARM core.
+		 * The arc_power firmware then checks various wakeup sources
+		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+		 * simply the power key) and re-starts the ARM core once it
+		 * detects a wakeup request.
+		 */
+		power-firmware@4f00000 {
+			reg = <0x4f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@20 {
+				compatible = "amlogic,meson8-canvas",
+					     "amlogic,canvas";
+				reg = <0x20 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+	};
+}; /* end of / */
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@84 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0x84 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@14 {
+			reg = <0x14 0x4>,
+			      <0x2c 0x4>,
+			      <0x24 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+
+		pwm_f_ao_pins: pwm-f-ao {
+			mux {
+				groups = "pwm_f_ao";
+				function = "pwm_f_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@9880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
+		reg = <0x9880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@80b0 {
+			reg = <0x80b0 0x28>,
+			      <0x80e8 0x18>,
+			      <0x8120 0x18>,
+			      <0x8030 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
+		};
+
+		sd_a_pins: sd-a {
+			mux {
+				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
+				function = "sd_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sd_c_pins: sd-c {
+			mux {
+				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
+				function = "sd_c";
+				bias-disable;
+			};
+		};
+
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
+		spi_nor_pins: nor {
+			mux {
+				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		eth_pins: ethernet {
+			mux {
+				groups = "eth_tx_clk_50m", "eth_tx_en",
+					 "eth_txd1", "eth_txd0",
+					 "eth_rx_clk_in", "eth_rx_dv",
+					 "eth_rxd1", "eth_rxd0", "eth_mdio",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm-e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+&efuse {
+	compatible = "amlogic,meson8-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>;
+	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
+};
+
+&hwrng {
+	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+};
+
+&rtc {
+	compatible = "amlogic,meson8-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&spifc {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
new file mode 100644
index 000000000..c6824d26d
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "Endless Computers Endless Mini";
+	compatible = "endless,ec100", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		pal-switch {
+			label = "pal";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+		};
+
+		ntsc-switch {
+			label = "ntsc";
+			linux,input-type = <EV_SW>;
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		/*
+		 * shutdown is managed by the EC (embedded micro-controller)
+		 * which is configured through GPIOAO_2 (poweroff GPIO) and
+		 * GPIOAO_7 (power LED, which has to go LOW as well).
+		 */
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		timeout-ms = <20000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "ec100:red:power";
+			/*
+			 * Needs to go LOW (together with the poweroff GPIO)
+			 * during shutdown to allow the EC (embedded
+			 * micro-controller) to shutdown the system. Setting
+			 * the output to LOW signals the EC to start a
+			 * "breathing"/pulsing effect until the power is fully
+			 * turned off.
+			 */
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X2 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		/*
+		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vcc_5v>;
+
+		/*
+		 * signal name from the schematics: USB_PWR_EN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		/*
+		 * supplied by the main power input which called PWR_5V_STB
+		 * in the schematics
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from the schematics: 3V3_5V_EN
+		 */
+		gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		/*
+		 * ABLIC S-1339D18-M5001-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * VDDIO_AO3.3V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_ddr3: regulator-vcc-ddr3 {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called
+		 * DDR3_1.5V in the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&vcc_5v>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_rtc: regulator-vcc-rtc {
+		/*
+		 * Global Mixed-mode Technology Inc. G918T12U-GP
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		/*
+		 * When the board is powered then the input is VCC3V3,
+		 * otherwise power is taken from the coin cell battery.
+		 */
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vddee: regulator-vddee {
+		/*
+		 * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
+		 * Synchronous Step Down Regulator. Also called VDDAO
+		 * in a part of the schematics.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+
+	rt5640: codec@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+		realtek,in1-differential;
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "Linux_TX", "Linux_RX",
+			  "SLP_S5_N", "USB2_OC_FLAG#",
+			  "HUB_RST", "USB_PWR_EN",
+			  "I2S_IN", "SLP_S1_N",
+			  "TCK", "TMS", "TDI", "TDO",
+			  "HDMI_CEC", "5640_IRQ",
+			  "MUTE", "S805_TEST#";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
+			  "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
+			  "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
+			  "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
+			  "UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
+			  "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
+			  /* Bank GPIOY */
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
+			  "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
+			  "VDDEE_PWM 3V3_5V_EN",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "RMII_IRQ", "RMII_RST#", "RMII_TXD1",
+			  "RMII_TXD0", "AV_select_1", "AV_select_2",
+			  "MCU_Control_S",
+			  /* Bank CARD */
+			  "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
+			  "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
+			  "CARD_EN_DET (CARD_DET)",
+			  /* Bank BOOT */
+			  "NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
+			  "NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
+			  "NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
+			  "NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
+			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
+			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
+			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  /* Bank DIF */
+			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
+			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
+			  "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
+			  "RMII_MDIO";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vcc_rtc>;
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
new file mode 100644
index 000000000..b2edac1fc
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 0 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddee: regulator-vddee {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&vcc_5v>;
+
+		pwms = <&pwm_cd 1 1148 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A/G (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			icplus,select-interrupt;
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
new file mode 100644
index 000000000..73ce1c13d
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vcc_3v3>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	rtc32k_xtal: rtc32k-xtal-clk {
+		/* X3 in the schematics */
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "RTC32K";
+		#clock-cells = <0>;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		/*
+		 * RICHTEK RT9179 configured for a fixed output voltage of
+		 * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+		 * VDD1V8 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 3.3V. This supplies not only VCC3V3 but
+		 * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vcck: regulator-vcck {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 0 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddc_ddr: regulator-vddc-ddr {
+		/*
+		 * Monolithic Power Systems MP2161 configured for a fixed
+		 * output voltage of 1.5V. This supplies not only DDR_VDDC but
+		 * also DDR3_1V5 according to the schematics.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "DDR_VDDC";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&p5v0>;
+	};
+
+	vddee: regulator-vddee {
+		/* Monolithic Power Systems MP2161 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDEE";
+		regulator-min-microvolt = <860000>;
+		regulator-max-microvolt = <1140000>;
+
+		pwm-supply = <&p5v0>;
+
+		pwms = <&pwm_cd 1 12218 0>;
+		pwm-dutycycle-range = <91 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd_rtc: regulator-vdd-rtc {
+		/*
+		 * Torex Semiconductor XC6215 configured for a fixed output of
+		 * 0.9V.
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_RTC";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&vcc_3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&efuse {
+	ethernet_mac_address: mac@1b4 {
+		reg = <0x1b4 0x6>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii-id";
+
+	nvmem-cells = <&ethernet_mac_address>;
+	nvmem-cell-names = "mac-address";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Realtek RTL8211F (0x001cc916) */
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* GPIOH_3 */
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOX */
+			  "J2 Header Pin 35", "J2 Header Pin 36",
+			  "J2 Header Pin 32", "J2 Header Pin 31",
+			  "J2 Header Pin 29", "J2 Header Pin 18",
+			  "J2 Header Pin 22", "J2 Header Pin 16",
+			  "J2 Header Pin 23", "J2 Header Pin 21",
+			  "J2 Header Pin 19", "J2 Header Pin 33",
+			  "J2 Header Pin 8", "J2 Header Pin 10",
+			  "J2 Header Pin 15", "J2 Header Pin 13",
+			  "J2 Header Pin 24", "J2 Header Pin 26",
+			  /* Bank GPIOY */
+			  "Revision (upper)", "Revision (lower)",
+			  "J2 Header Pin 7", "", "J2 Header Pin 12",
+			  "J2 Header Pin 11", "", "", "",
+			  "TFLASH_VDD_EN", "", "",
+			  /* Bank GPIODV */
+			  "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL",
+			  "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)",
+			  "",
+			  /* Bank GPIOH */
+			  "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
+			  "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1",
+			  "ETH_TXD0", "ETH_TXD3", "ETH_TXD2",
+			  "ETH_RGMII_TX_CLK",
+			  /* Bank CARD */
+			  "SD_DATA1 (SDB_D1)", "SD_DATA0 (SDB_D0)",
+			  "SD_CLK",  "SD_CMD", "SD_DATA3 (SDB_D3)",
+			  "SD_DATA2 (SDB_D2)", "SD_CDN (SD_DET_N)",
+			  /* Bank BOOT */
+			  "SDC_D0 (EMMC)", "SDC_D1 (EMMC)",
+			  "SDC_D2 (EMMC)", "SDC_D3 (EMMC)",
+			  "SDC_D4 (EMMC)", "SDC_D5 (EMMC)",
+			  "SDC_D6 (EMMC)", "SDC_D7 (EMMC)",
+			  "SDC_CLK (EMMC)", "SDC_RSTn (EMMC)",
+			  "SDC_CMD (EMMC)", "BOOT_SEL", "", "", "",
+			  "", "", "", "",
+			  /* Bank DIF */
+			  "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV",
+			  "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2",
+			  "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT",
+			  "ETH_MDC", "ETH_MDIO";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "",
+			  "TF_3V3N_1V8_EN", "USB_HUB_RST_N",
+			  "USB_OTG_PWREN", "J7 Header Pin 2",
+			  "IR_IN", "J7 Header Pin 4",
+			  "J7 Header Pin 6", "J7 Header Pin 5",
+			  "J7 Header Pin 7", "HDMI_CEC",
+			  "SYS_LED", "", "";
+
+	/*
+	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller.
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&tflash_vdd>;
+		vqmmc-supply = <&tf_io>;
+	};
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
+
+&rtc {
+	/* needs to be enabled manually when a battery is connected */
+	clocks = <&rtc32k_xtal>;
+	vdd-supply = <&vdd_rtc>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
new file mode 100644
index 000000000..af2454c9f
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include "meson.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-microvolt = <1140000>;
+		};
+	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
+			opp-microvolt = <1100000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1100000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+	};
+}; /* end of / */
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@84 {
+		compatible = "amlogic,meson8b-aobus-pinctrl";
+		reg = <0x84 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@14 {
+			reg = <0x14 0x4>,
+				<0x2c 0x4>,
+				<0x24 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8b-pwm";
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8b-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@9880 {
+		compatible = "amlogic,meson8b-cbus-pinctrl";
+		reg = <0x9880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@80b0 {
+			reg = <0x80b0 0x28>,
+				<0x80e8 0x18>,
+				<0x8120 0x18>,
+				<0x8030 0x38>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 83>;
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8b-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+
+&efuse {
+	compatible = "amlogic,meson8b-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	reg = <0xc9410000 0x10000
+	       0xc1108140 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gpio-intc",
+		     "amlogic,meson8b-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
+};
+
+&hwrng {
+	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a5-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm";
+};
+
+&rtc {
+	compatible = "amlogic,meson8b-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+	compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
new file mode 100644
index 000000000..8f4eb1ed4
--- /dev/null
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru>
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+/dts-v1/;
+
+#include "meson8m2.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Tronsmart MXIII Plus";
+	compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c_AO;
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		mmc0 = &sd_card_slot;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
+	vcc_3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddio_ao1v8: LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "VCC1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+&sdio {
+	status = "okay";
+
+	pinctrl-0 = <&sd_b_pins>;
+	pinctrl-names = "default";
+
+	/* SD card */
+	sd_card_slot: slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		no-sdio;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+/* connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
new file mode 100644
index 000000000..6725dd9fd
--- /dev/null
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&dmcbus {
+	/* the offset of the canvas registers has changed compared to Meson8 */
+	/delete-node/ video-lut@20;
+
+	canvas: video-lut@48 {
+		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+		reg = <0x48 0x14>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+			bias-disable;
+		};
+	};
+};
+
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
new file mode 100644
index 000000000..614f60c6b
--- /dev/null
+++ b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Socionext Milbeaut M10V Evaluation Board */
+/dts-v1/;
+#include "milbeaut-m10v.dtsi"
+
+/ {
+	model = "Socionext M10V EVB";
+	compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "rootwait earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		uclk40xi: uclk40xi {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <40000000>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000  0x80000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi
new file mode 100644
index 000000000..aa7c6caeb
--- /dev/null
+++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "socionext,sc2000a";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,milbeaut-m10v-smp";
+		cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+		cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+		};
+		cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+		};
+		cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+		};
+	};
+
+	timer { /* The Generic Timer */
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <40000000>;
+		always-on;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&gic>;
+
+		gic: interrupt-controller@1d000000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1d001000 0x1000>,
+			      <0x1d002000 0x1000>; /* CPU I/f base and size */
+		};
+
+		timer@1e000050 { /* 32-bit Reload Timers */
+			compatible = "socionext,milbeaut-timer";
+			reg = <0x1e000050 0x20>;
+			interrupts = <0 91 4>;
+		};
+
+		uart1: serial@1e700010 { /* PE4, PE5 */
+			/* Enable this as ttyUSI0 */
+			compatible = "socionext,milbeaut-usio-uart";
+			reg = <0x1e700010 0x10>;
+			interrupts = <0 141 0x4>, <0 149 0x4>;
+			interrupt-names = "rx", "tx";
+		};
+
+	};
+
+	sram@0 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x10000>;
+		smp-sram@f100 {
+			compatible = "socionext,milbeaut-smp-sram";
+			reg = <0xf100 0x20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
new file mode 100644
index 000000000..04f1ae138
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Brownstone Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+	pmic: max8925@3c {
+		compatible = "maxium,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			SDV3 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+			};
+			LDO11 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO15 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO16 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO17 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO18 {
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO19 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO20 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
new file mode 100644
index 000000000..342304f56
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * OLPC XO 1.75 Laptop.
+ *
+ * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "OLPC XO-1.75";
+	compatible = "olpc,xo-1.75", "mrvl,mmp2";
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@1fc00000 {
+			compatible = "simple-framebuffer";
+			reg = <0x1fc00000 (1200 * 900 * 2)>;
+			width = <1200>;
+			height = <900>;
+			stride = <(1200 * 2)>;
+			format = "r5g6b5";
+			clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>,
+				 <&soc_clocks MMP2_CLK_DISP0>;
+		};
+	};
+
+	memory {
+		linux,usable-memory = <0x0 0x1f800000>;
+		available = <0xcf000 0x1ef31000 0x1000 0xbf000>;
+		reg = <0x0 0x20000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 129 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		tablet_mode {
+			label = "E-Book Mode";
+			gpios = <&gpio 128 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-gpio,timeout-ms = <1000>;
+		status = "okay";
+
+		camera@21 {
+			compatible = "ovti,ov7670";
+			reg = <0x21>;
+			reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>;
+			clocks = <&camera0>;
+			clock-names = "xclk";
+
+			port {
+				ov7670_0: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&camera0_0>;
+				};
+			};
+		};
+	};
+
+	battery {
+		compatible = "olpc,xo1.5-battery", "olpc,xo1-battery";
+	};
+
+	wlan_reg: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: pwrseq0 {
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound-card {
+		compatible = "audio-graph-card";
+		label = "OLPC XO";
+		dais = <&sspa0_dai>;
+		routing = "Headphones", "HPOL",
+			  "Headphones", "HPOR",
+			  "MIC2", "Mic Jack";
+		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
+		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		axi@d4200000 {
+			ap-sp@d4290000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "olpc,ap-sp";
+				interrupts = <40>;
+				reg = <0xd4290000 0x1000>;
+				data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+				clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&mmc1 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	mrvl,clk-delay-cycles = <31>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <4>;
+	non-removable;
+	broken-cd;
+	wakeup-source;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&wlan_reg>;
+	status = "okay";
+};
+
+&mmc3 {
+	clock-frequency = <50000000>;
+	no-1-8-v;
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mrvl,clk-delay-cycles = <31>;
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	audio-codec@1a {
+		compatible = "realtek,alc5631";
+		reg = <0x1a>;
+		status = "okay";
+
+		port {
+			rt5631_0: endpoint {
+				mclk-fs = <256>;
+				clocks = <&audio_clk 0>;
+				remote-endpoint = <&sspa0_0>;
+			};
+		};
+	};
+};
+
+&twsi2 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi6 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		status = "okay";
+	};
+};
+
+&ssp3 {
+	#address-cells = <0>;
+	spi-slave;
+	status = "okay";
+	ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+	slave {
+		compatible = "olpc,xo1.75-ec";
+		spi-cpha;
+		cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camera0 {
+	status = "okay";
+
+	port {
+		camera0_0: endpoint {
+			remote-endpoint = <&ov7670_0>;
+		};
+	};
+};
+
+&asram {
+	status = "okay";
+};
+
+&adma0 {
+	status = "okay";
+};
+
+&audio_clk {
+	status = "okay";
+};
+
+&sspa0 {
+	status = "okay";
+	dmas = <&adma0 0>, <&adma0 1>;
+	dma-names = "tx", "rx";
+
+	sspa0_dai: port {
+		sspa0_0: endpoint {
+			remote-endpoint = <&rt5631_0>;
+			frame-master;
+			bitclock-master;
+			dai-format = "i2s";
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
new file mode 100644
index 000000000..445bdcd50
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			gpu: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x4000>;
+				interrupts = <8>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP2_CLK_GPU_3D>,
+					 <&soc_clocks MMP2_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			usb_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp2-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb-otg@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <44>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <52>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <53>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <42>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <30>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			adma0: dma-controller@d42a0800 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0800 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				asram = <&asram>;
+				iram = <&asram>;
+				status = "disabled";
+			};
+
+			adma1: dma-controller@d42a0900 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0900 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+
+			audio_clk: clocks@d42a0c30 {
+				compatible = "marvell,mmp2-audio-clock";
+				reg = <0xd42a0c30 0x10>;
+				clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&soc_clocks MMP2_CLK_VCTCXO>,
+					 <&soc_clocks MMP2_CLK_I2S0>,
+					 <&soc_clocks MMP2_CLK_I2S1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#clock-cells = <1>;
+				status = "disabled";
+			};
+
+			sspa0: audio-controller@d42a0c00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0c00 0x30>,
+				      <0xd42a0c80 0x30>;
+				interrupts = <2>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk 1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sspa1: audio-controller@d42a0d00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0d00 0x30>,
+				      <0xd42a0d80 0x30>;
+				interrupts = <3>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk 2>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			dma-controller@d4000000 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0xd4000000 0x10000>;
+				interrupts = <48>;
+				#dma-channels = <16>;
+				status = "disabled";
+			};
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <21>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		asram: sram@e0000000 {
+			compatible = "mmio-sram";
+			reg = <0xe0000000 0x10000>;
+			ranges = <0 0xe0000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		soc_clocks: clocks {
+			compatible = "marvell,mmp2-clock";
+			reg = <0xd4050000 0x2000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
new file mode 100644
index 000000000..fe3b1cd69
--- /dev/null
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D)
+ *
+ * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+/dts-v1/;
+#include "mmp3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Dell Ariel";
+	compatible = "dell,wyse-ariel", "marvell,mmp3";
+
+	aliases {
+		serial2 = &uart3;
+	};
+
+	chosen {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200";
+	};
+
+	memory@0 {
+		linux,usable-memory = <0x0 0x7f600000>;
+		available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>;
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usb_otg0 {
+	status = "okay";
+};
+
+&usb_otg_phy0 {
+	status = "okay";
+};
+
+&hsic0 {
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2640";
+		reg = <0x01>;
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+
+		mass-storage@1 {
+			compatible = "usb424,4040";
+			reg = <0x01>;
+			status = "disabled";
+		};
+	};
+};
+
+&hsic_phy0 {
+	status = "okay";
+	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc3 {
+	status = "okay";
+	max-frequency = <50000000>;
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-highspeed;
+};
+
+&twsi1 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&twsi4 {
+	status = "okay";
+};
+
+&ssp1 {
+	status = "okay";
+	cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+
+	firmware-flash@0 {
+		compatible = "winbond,w25q32", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+&ssp2 {
+	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
new file mode 100644
index 000000000..4ae630d37
--- /dev/null
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ *  Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,mmp3-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			interrupt-controller@d4282000 {
+				compatible = "marvell,mmp3-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>,
+				      <0xd4284000 0x100>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			pmic_mux: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			rtc_mux: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi3_mux: interrupt-controller@d42821bc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1bc 0x4>, <0x1a4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			gpu_mux: interrupt-controller@d42821c0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c0 0x4>, <0x1a8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			twsi_mux: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			hsi2_mux: interrupt-controller@d42821c4 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c4 0x4>, <0x1ac 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			dxo_mux: interrupt-controller@d42821c8 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1c8 0x4>, <0x1b0 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			misc1_mux: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <31>;
+			};
+
+			ci_mux: interrupt-controller@d42821cc {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1cc 0x4>, <0x1b4 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			ssp_mux: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			hsi1_mux: interrupt-controller@d4282184 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x184 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <4>;
+			};
+
+			misc2_mux: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x180 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <20>;
+			};
+
+			hsi0_mux: interrupt-controller@d42821d0 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x1d0 0x4>, <0x1b8 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			usb_otg_phy0: usb-phy@d4207000 {
+				compatible = "marvell,mmp3-usb-phy";
+				reg = <0xd4207000 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb_otg0: usb@d4208000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xd4208000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USB>;
+				clock-names = "USBCLK";
+				phys = <&usb_otg_phy0>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			hsic_phy0: usb-phy@f0001800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0001800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic0: usb@f0001000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0001000 0x200>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy0>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			hsic_phy1: usb-phy@f0002800 {
+				compatible = "marvell,mmp3-hsic-phy";
+				reg = <0xf0002800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic1: usb@f0002000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0002000 0x200>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy1>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			mmc1: mmc@d4280000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH0>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc2: mmc@d4280800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4280800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH1>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc3: mmc@d4281000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281000 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH2>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc4: mmc@d4281800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4281800 0x120>;
+				clocks = <&soc_clocks MMP2_CLK_SDH3>;
+				clock-names = "io";
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			mmc5: mmc@d4217000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4217000 0x120>;
+				clocks = <&soc_clocks MMP3_CLK_SDH4>;
+				clock-names = "io";
+				interrupt-parent = <&hsi1_mux>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			camera0: camera@d420a000 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a000 0x800>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			camera1: camera@d420a800 {
+				compatible = "marvell,mmp2-ccic";
+				reg = <0xd420a800 0x800>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_CCIC1>;
+				clock-names = "axi";
+				power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+				#clock-cells = <0>;
+				clock-output-names = "mclk";
+				status = "disabled";
+			};
+
+			gpu_3d: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <0>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			gpu_2d: gpu@d420f000 {
+				compatible = "vivante,gc";
+				reg = <0xd420f000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <2>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TIMER>;
+			};
+
+			uart1: serial@d4030000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@d4016000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x70>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4031000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4031000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <0>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi3: i2c@d4032000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4032000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <1>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
+				resets = <&soc_clocks MMP2_CLK_TWSI2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi4: i2c@d4033000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <2>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
+				resets = <&soc_clocks MMP2_CLK_TWSI3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			twsi5: i2c@d4033800 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4033800 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <3>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
+				resets = <&soc_clocks MMP2_CLK_TWSI4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			twsi6: i2c@d4034000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4034000 0x70>;
+				interrupt-parent = <&twsi_mux>;
+				interrupts = <4>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
+				resets = <&soc_clocks MMP2_CLK_TWSI5>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1>, <0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&rtc_mux>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+
+			ssp1: spi@d4035000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4035000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP0>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d4036000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4036000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP1>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d4037000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4037000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP2>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssp4: spi@d4039000 {
+				compatible = "marvell,mmp2-ssp";
+				reg = <0xd4039000 0x1000>;
+				clocks = <&soc_clocks MMP2_CLK_SSP3>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		l2: cache-controller@d0020000 {
+			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
+			reg = <0xd0020000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		soc_clocks: clocks@d4050000 {
+			compatible = "marvell,mmp3-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		snoop-control-unit@e0000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0xe0000000 0x100>;
+		};
+
+		gic: interrupt-controller@e0001000 {
+			compatible = "arm,arm11mp-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xe0001000 0x1000>,
+			      <0xe0000100 0x100>;
+		};
+
+		local-timer@e0000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			reg = <0xe0000600 0x20>;
+		};
+
+		watchdog@e0000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0xe0000620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
new file mode 100644
index 000000000..08a7d3ce3
--- /dev/null
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common CPCAP configuration used on Motorola phones
+ */
+
+&mcspi1 {
+	cpcap: pmic@0 {
+		compatible = "motorola,cpcap", "st,6556002";
+		reg = <0>;	/* cs0 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <9600000>;
+		spi-cs-high;
+		spi-cpol;
+		spi-cpha;
+
+		cpcap_adc: adc {
+			compatible = "motorola,mapphone-cpcap-adc";
+			interrupts-extended = <&cpcap 8 0>;
+			interrupt-names = "adcdone";
+			#io-channel-cells = <1>;
+		};
+
+		cpcap_battery: battery {
+			compatible = "motorola,cpcap-battery";
+			interrupts-extended = <
+				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
+				&cpcap 20 0 &cpcap 54 0 &cpcap 57 0
+			>;
+			interrupt-names =
+				"eol", "lowbph", "lowbpl",
+				"chrgcurr1", "battdetb",
+				"cccal";
+			io-channels = <&cpcap_adc 0 &cpcap_adc 1
+				       &cpcap_adc 5 &cpcap_adc 6>;
+			io-channel-names = "battdetb", "battp",
+					   "chg_isense", "batti";
+			power-supplies = <&cpcap_charger>;
+		};
+
+		cpcap_charger: charger {
+			compatible = "motorola,mapphone-cpcap-charger";
+			interrupts-extended = <
+				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
+				&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
+				&cpcap 54 0
+			>;
+			interrupt-names =
+				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+				"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+				"battdetb";
+			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
+				      &gpio3 23 GPIO_ACTIVE_LOW>;
+			io-channels = <&cpcap_adc 0 &cpcap_adc 1
+				       &cpcap_adc 2 &cpcap_adc 5
+				       &cpcap_adc 6>;
+			io-channel-names = "battdetb", "battp",
+					   "vbus", "chg_isense",
+					   "batti";
+		};
+
+		cpcap_regulator: regulator {
+			compatible = "motorola,mapphone-cpcap-regulator";
+
+			cpcap_regulators: regulators {
+			};
+		};
+
+		cpcap_audio: audio-codec {
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				cpcap_audio_codec0: endpoint {
+				};
+			};
+			port@1 {
+				cpcap_audio_codec1: endpoint {
+				};
+			};
+		};
+
+		cpcap_rtc: rtc {
+			compatible = "motorola,cpcap-rtc";
+
+			interrupt-parent = <&cpcap>;
+			interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+		};
+
+		power_button: button {
+			compatible = "motorola,cpcap-pwrbutton";
+
+			interrupts = <23 IRQ_TYPE_NONE>;
+		};
+
+		cpcap_usb2_phy: phy {
+			compatible = "motorola,mapphone-cpcap-usb-phy";
+			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+			pinctrl-1 = <&usb_ulpi_pins>;
+			pinctrl-2 = <&usb_utmi_pins>;
+			pinctrl-3 = <&uart3_pins>;
+			pinctrl-names = "default", "ulpi", "utmi", "uart";
+			#phy-cells = <0>;
+			interrupts-extended = <
+				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+				&cpcap 48 0
+			>;
+			interrupt-names =
+				"id_ground", "id_float", "se0conn", "vbusvld",
+				"sessvld", "sessend", "se1", "dm", "dp";
+			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+				      &gpio1 0 GPIO_ACTIVE_HIGH>;
+			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+			io-channel-names = "vbus", "id";
+			vusb-supply = <&vusb>;
+		};
+
+		led_red: led-red {
+			compatible = "motorola,cpcap-led-red";
+			vdd-supply = <&sw5>;
+			label = "status-led:red";
+		};
+
+		led_green: led-green {
+			compatible = "motorola,cpcap-led-green";
+			vdd-supply = <&sw5>;
+			label = "status-led:green";
+		};
+
+		led_blue: led-blue {
+			compatible = "motorola,cpcap-led-blue";
+			vdd-supply = <&sw5>;
+			label = "status-led:blue";
+		};
+
+		led_adl: led-adl {
+			compatible = "motorola,cpcap-led-adl";
+			vdd-supply = <&sw5>;
+			label = "button-backlight";
+		};
+
+		led_cp: led-cp {
+			compatible = "motorola,cpcap-led-cp";
+			vdd-supply = <&sw5>;
+			label = "shift-key-light";
+		};
+	};
+};
+
+&cpcap_regulators {
+	sw5: SW5 {
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		regulator-enable-ramp-delay = <50000>;
+		regulator-boot-on;
+	};
+
+	vcam: VCAM {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	/* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
+	vcsi: VCSI {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <1000>;
+		regulator-always-on;
+	};
+
+	vdac: VDAC {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vdig: VDIG {
+		regulator-min-microvolt = <1875000>;
+		regulator-max-microvolt = <1875000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vfuse: VFUSE {
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vhvio: VHVIO {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+		regulator-always-on;
+	};
+
+	/* Used by eMMC at mmc2 */
+	vsdio: VSDIO {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vpll: VPLL {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <100>;
+	};
+
+	vrf1: VRF1 {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vrf2: VRF2 {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vrfref: VRFREF {
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <100>;
+	};
+
+	vwlan1: VWLAN1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	/* Used by micro-SDIO at mmc1 */
+	vwlan2: VWLAN2 {
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vsim: VSIM {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vsimcard: VSIMCARD {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vvib: VVIB {
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-enable-ramp-delay = <500>;
+	};
+
+	vusb: VUSB {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	vaudio: VAUDIO {
+		regulator-min-microvolt = <2775000>;
+		regulator-max-microvolt = <2775000>;
+		regulator-enable-ramp-delay = <1000>;
+		regulator-initial-mode = <0x00>; /* NORMAL */
+	};
+};
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
new file mode 100644
index 000000000..f9392a135
--- /dev/null
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -0,0 +1,877 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	/*
+	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+	 * then 1023 - 1024 seems to contain mbm.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
+	};
+
+	/* Poweroff GPIO probably connected to CPCAP */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_gpio>;
+		pinctrl-names = "default";
+		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		pinctrl-0 = <&hdmi_hpd_gpio>;
+		pinctrl-names = "default";
+		label = "hdmi";
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	/*
+	 * HDMI 5V regulator probably sourced from battery. Let's keep
+	 * keep this as always enabled for HDMI to work until we've
+	 * figured what the encoder chip is.
+	 */
+	hdmi_regulator: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+
+	/* This is probably coming straight from the battery.. */
+	wl12xx_vmmc: regulator-wl12xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <1650000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+			linux,code = <KEY_VOLUMEDOWN>;
+			linux,can-disable;
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
+		};
+
+		slider {
+			label = "Keypad Slide";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			linux,can-disable;
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
+		};
+	};
+
+	soundcard {
+		compatible = "audio-graph-card";
+		label = "Droid 4 Audio";
+
+		widgets =
+			"Speaker", "Earpiece",
+			"Speaker", "Loudspeaker",
+			"Headphone", "Headphone Jack",
+			"Microphone", "Internal Mic";
+
+		routing =
+			"Earpiece", "EP",
+			"Loudspeaker", "SPKR",
+			"Headphone Jack", "HSL",
+			"Headphone Jack", "HSR",
+			"MICR", "Internal Mic";
+
+		dais = <&mcbsp2_port>, <&mcbsp3_port>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&cpu_thermal {
+	polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+        temperature = <80000>; /* millicelsius */
+};
+
+&cpu0 {
+        /*
+	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
+	 * the Motorola Android Linux v3.0.8 based kernel.
+	 */
+        operating-points = <
+	        /* kHz    uV */
+	        300000  1025000
+	        600000  1200000
+	        800000  1313000
+	        1008000 1375000
+		1200000 1375000
+        >;
+};
+
+&dss {
+	status = "okay";
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	pinctrl-names = "default";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c1 {
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+		pinctrl-0 = <&tmp105_irq>;
+		pinctrl-names = "default";
+		/* kpd_row0.gpio_178 */
+		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+				       &omap4_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <
+
+	/* Row 1 */
+	MATRIX_KEY(0, 2, KEY_1)
+	MATRIX_KEY(0, 6, KEY_2)
+	MATRIX_KEY(2, 3, KEY_3)
+	MATRIX_KEY(0, 7, KEY_4)
+	MATRIX_KEY(0, 4, KEY_5)
+	MATRIX_KEY(5, 5, KEY_6)
+	MATRIX_KEY(0, 1, KEY_7)
+	MATRIX_KEY(0, 5, KEY_8)
+	MATRIX_KEY(0, 0, KEY_9)
+	MATRIX_KEY(1, 6, KEY_0)
+
+	/* Row 2 */
+	MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+	MATRIX_KEY(7, 6, KEY_Q)
+	MATRIX_KEY(7, 7, KEY_W)
+	MATRIX_KEY(7, 2, KEY_E)
+	MATRIX_KEY(1, 0, KEY_R)
+	MATRIX_KEY(4, 4, KEY_T)
+	MATRIX_KEY(1, 2, KEY_Y)
+	MATRIX_KEY(6, 7, KEY_U)
+	MATRIX_KEY(2, 2, KEY_I)
+	MATRIX_KEY(5, 6, KEY_O)
+	MATRIX_KEY(3, 7, KEY_P)
+	MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+	/* Row 3 */
+	MATRIX_KEY(5, 4, KEY_TAB)
+	MATRIX_KEY(5, 7, KEY_A)
+	MATRIX_KEY(2, 7, KEY_S)
+	MATRIX_KEY(7, 0, KEY_D)
+	MATRIX_KEY(2, 6, KEY_F)
+	MATRIX_KEY(6, 2, KEY_G)
+	MATRIX_KEY(6, 6, KEY_H)
+	MATRIX_KEY(1, 4, KEY_J)
+	MATRIX_KEY(3, 1, KEY_K)
+	MATRIX_KEY(2, 1, KEY_L)
+	MATRIX_KEY(4, 6, KEY_ENTER)
+
+	/* Row 4 */
+	MATRIX_KEY(3, 6, KEY_LEFTSHIFT)		/* KEY_CAPSLOCK */
+	MATRIX_KEY(6, 1, KEY_Z)
+	MATRIX_KEY(7, 4, KEY_X)
+	MATRIX_KEY(5, 1, KEY_C)
+	MATRIX_KEY(1, 7, KEY_V)
+	MATRIX_KEY(2, 4, KEY_B)
+	MATRIX_KEY(4, 1, KEY_N)
+	MATRIX_KEY(1, 1, KEY_M)
+	MATRIX_KEY(3, 5, KEY_COMMA)
+	MATRIX_KEY(5, 2, KEY_DOT)
+	MATRIX_KEY(6, 3, KEY_UP)
+	MATRIX_KEY(7, 3, KEY_OK)
+
+	/* Row 5 */
+	MATRIX_KEY(2, 5, KEY_LEFTCTRL)		/* KEY_LEFTSHIFT */
+	MATRIX_KEY(4, 5, KEY_LEFTALT)		/* SYM */
+	MATRIX_KEY(6, 0, KEY_MINUS)
+	MATRIX_KEY(4, 7, KEY_EQUAL)
+	MATRIX_KEY(1, 5, KEY_SPACE)
+	MATRIX_KEY(3, 2, KEY_SLASH)
+	MATRIX_KEY(4, 3, KEY_LEFT)
+	MATRIX_KEY(5, 3, KEY_DOWN)
+	MATRIX_KEY(3, 3, KEY_RIGHT)
+
+	/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+	>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vwlan2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
+};
+
+&mmc2 {
+	vmmc-supply = <&vsdio>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0xde>;
+	interrupt-names = "irq", "wakeup";
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1285";
+		reg = <2>;
+		/* gpio_100 with gpmc_wait2 pad as wakeirq */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <&omap4_pmx_core 0x4e>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			ti,led-mode = <0>;
+			label = ":kbd_backlight";
+		};
+	};
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+
+	/* hdmi_hpd.gpio_63 */
+	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	hdq_pins: pinmux_hdq_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/*
+	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+	 * for gpio_100, but the internal pull makes wlan flakey on some
+	 * devices. Off mode value should be tested if we have off mode working
+	 * later on.
+	 */
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	/* gpmc_ncs0.gpio_50 */
+	poweroff_gpio: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: pinmux_tmp105_irq {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+		/* gpio_60 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: pinmux_touchscreen_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: pinmux_als_proximity_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	usb_ulpi_pins: pinmux_usb_ulpi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	/* usb0_otg_dp and usb0_otg_dm */
+	usb_utmi_pins: pinmux_usb_utmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/*
+	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
+	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
+	 * when not used. If needed, we can add rts pin remux later based
+	 * on power measurements.
+	 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
+		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
+		OMAP4_IOPAD(0x13e, MUX_MODE1)
+
+		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
+		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
+
+		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
+		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
+		>;
+	};
+
+	/* uart3_tx_irtx and uart3_rx_irrx */
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, MUX_MODE2)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
+		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
+		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
+		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
+		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
+		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
+		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
+		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
+		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
+		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
+		>;
+	};
+
+	vibrator_direction_pin: pinmux_vibrator_direction_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: pinmux_vibrator_enable_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+/*
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
+ */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x110>;
+	uart-has-rtscts;
+	current-speed = <115200>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1285-st";
+		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+		max-speed = <3686400>;
+	};
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+
+	/*
+	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
+	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
+	 */
+	power = <150>;
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+
+	lis3dh: accelerometer@18 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x18>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+		rotation-matrix = "0", "-1", "0",
+				  "1", "0", "0",
+				  "0", "0", "1";
+	};
+};
+
+&mcbsp2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+
+	mcbsp2_port: port {
+		cpu_dai2: endpoint {
+			dai-format = "i2s";
+			remote-endpoint = <&cpcap_audio_codec0>;
+			frame-master = <&cpcap_audio_codec0>;
+			bitclock-master = <&cpcap_audio_codec0>;
+		};
+	};
+};
+
+&mcbsp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+	status = "okay";
+
+	mcbsp3_port: port {
+		cpu_dai3: endpoint {
+			dai-format = "dsp_a";
+			frame-master = <&cpcap_audio_codec1>;
+			bitclock-master = <&cpcap_audio_codec1>;
+			remote-endpoint = <&cpcap_audio_codec1>;
+		};
+	};
+};
+
+&cpcap_audio_codec0 {
+	remote-endpoint = <&cpu_dai2>;
+};
+
+&cpcap_audio_codec1 {
+	remote-endpoint = <&cpu_dai3>;
+};
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
new file mode 100644
index 000000000..e07b807b4
--- /dev/null
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ */
+
+/dts-v1/;
+#include "moxart.dtsi"
+
+/ {
+	model = "MOXA UC-7112-LX";
+	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	clocks {
+		ref12: ref12M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+	};
+
+	flash@80000000,0 {
+		compatible = "numonyx,js28f128", "cfi-flash";
+		reg = <0x80000000 0x1000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "linux kernel";
+			reg = <0x40000 0x1C0000>;
+		};
+		partition@200000 {
+			label = "root filesystem";
+			reg = <0x200000 0x800000>;
+		};
+		partition@a00000 {
+			label = "user filesystem";
+			reg = <0xa00000 0x600000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "ready-led";
+			gpios = <&gpio 27 0x1>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <500>;
+		button@25 {
+			label = "GPIO Reset";
+			linux,code = <116>;
+			gpios = <&gpio 25 1>;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
+	};
+};
+
+&clk_pll {
+	clocks = <&ref12>;
+};
+
+&mmc {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
new file mode 100644
index 000000000..764832ddf
--- /dev/null
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "moxa,moxart";
+	model = "MOXART";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "faraday,fa526";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x90000000 0x10000000>;
+		ranges;
+
+		intc: interrupt-controller@98800000 {
+			compatible = "moxa,moxart-ic", "faraday,ftintc010";
+			reg = <0x98800000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-mask = <0x00080000>;
+		};
+
+		clk_pll: clk_pll@98100000 {
+			compatible = "moxa,moxart-pll-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+		};
+
+		clk_apb: clk_apb@98100000 {
+			compatible = "moxa,moxart-apb-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+			clocks = <&clk_pll>;
+		};
+
+		timer: timer@98400000 {
+			compatible = "moxa,moxart-timer", "faraday,fttmr010";
+			reg = <0x98400000 0x42>;
+			interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk_apb>;
+			clock-names = "PCLK";
+		};
+
+		gpio: gpio@98700000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			compatible = "moxa,moxart-gpio", "faraday,ftgpio010";
+			reg = <0x98700000 0x100>;
+		};
+
+		rtc: rtc {
+			compatible = "moxa,moxart-rtc";
+			gpio-rtc-sclk = <&gpio 5 0>;
+			gpio-rtc-data = <&gpio 6 0>;
+			gpio-rtc-reset = <&gpio 7 0>;
+		};
+
+		dma: dma@90500000 {
+			compatible = "moxa,moxart-dma";
+			reg = <0x90500080 0x40>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		watchdog: watchdog@98500000 {
+			compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
+			reg = <0x98500000 0x10>;
+			clocks = <&clk_apb>;
+			clock-names = "PCLK";
+		};
+
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
+			reg = <0x98e00000 0x5C>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_apb>;
+			dmas =  <&dma 5>,
+				<&dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mdio0: mdio@90900090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x90900090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@92000090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x92000090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac0: mac@90900000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x90900000 0x90>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&ethphy0>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		mac1: mac@92000000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x92000000 0x90>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			phy-handle = <&ethphy1>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		uart0: uart@98200000 {
+			compatible = "ns16550a";
+			reg = <0x98200000 0x20>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14745600>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
new file mode 100644
index 000000000..005c2758e
--- /dev/null
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * mpa1600.dts - Device Tree file for Phontech MPA 1600
+ *
+ *  Copyright (C) 2013 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+#include "at91rm9200.dtsi"
+
+/ {
+	model = "Phontech MPA 1600";
+	compatible = "phontech,mpa1600", "atmel,at91rm9200";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			ssc0: ssc@fffd0000 {
+				status = "okay";
+			};
+
+			ssc1: ssc@fffd4000 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@300000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		monitor_mute {
+			label = "Monitor mute";
+			gpios = <&pioC 1 GPIO_ACTIVE_LOW>;
+			linux,code = <113>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/mps2-an385.dts
new file mode 100644
index 000000000..aebbebfc2
--- /dev/null
+++ b/arch/arm/boot/dts/mps2-an385.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 385/386";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@21000000 {
+		device_type = "memory";
+		reg = <0x21000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@0,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/mps2-an399.dts
new file mode 100644
index 000000000..349abf70b
--- /dev/null
+++ b/arch/arm/boot/dts/mps2-an399.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "mps2.dtsi"
+
+/ {
+	model = "ARM MPS2 Application Note 399/400";
+	compatible = "arm,mps2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:9600n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x1000000>;
+	};
+
+	smb {
+		ethernet@1,0 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <1 0x0 0x10000>;
+			interrupts = <13>;
+			interrupt-parent = <&nvic>;
+			smsc,irq-active-high;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&timer1 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
new file mode 100644
index 000000000..37f5023f5
--- /dev/null
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	oscclk0: clk-osc0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	oscclk1: clk-osc1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	oscclk2: clk-osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	cfgclk: clk-cfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <5000000>;
+	};
+
+	spicfgclk: clk-spicfg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+
+	sysclk: clk-sys {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audmclk: clk-audm {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	audsclk: clk-auds {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk1>;
+		#clock-cells = <0>;
+		clock-div = <8>;
+		clock-mult = <1>;
+	};
+
+	spiclcd: clk-cpiclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	spicon: clk-spicon {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2cclcd: clk-i2cclcd {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	i2caud: clk-i2caud {
+		compatible = "fixed-factor-clock";
+		clocks = <&oscclk0>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+
+		apb@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40000000 0x10000>;
+
+			timer0: mps2-timer0@0 {
+				compatible = "arm,mps2-timer";
+				reg = <0x0 0x1000>;
+				interrupts = <8>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer1: mps2-timer1@1000 {
+				compatible = "arm,mps2-timer";
+				reg = <0x1000 0x1000>;
+				interrupts = <9>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			timer2: dual-timer@2000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x2000 0x1000>;
+				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+				clock-names = "timer0clk", "timer1clk",
+					       "apb_pclk";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			uart0: serial@4000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x4000 0x1000>;
+				interrupts = <0>, <1>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart1: serial@5000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x5000 0x1000>;
+				interrupts = <2>, <3>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			uart2: serial@6000 {
+				compatible = "arm,mps2-uart";
+				reg = <0x6000 0x1000>;
+				interrupts = <4>, <5>, <12>;
+				clocks = <&sysclk>;
+				status = "disabled";
+			};
+
+			wdt: watchdog@8000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0x8000 0x1000>;
+				interrupts = <0>;
+				clocks = <&sysclk>, <&sysclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+
+	fpga@40020000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40020000 0x10000>;
+
+		fpgaio@8000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x8000 0x10>;
+
+			led0 {
+				compatible = "register-bit-led";
+				offset = <0x0>;
+				mask = <0x01>;
+				label = "userled:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+
+			led1 {
+				compatible = "register-bit-led";
+				offset = <0x0>;
+				mask = <0x02>;
+				label = "userled:1";
+				linux,default-trigger = "usr";
+				default-state = "off";
+			};
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40200000 0x10000>,
+			 <1 0 0xa0000000 0x10000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
new file mode 100644
index 000000000..f9db2ff86
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity-msc313.dtsi"
+
+/ {
+	model = "BreadBee Crust";
+	compatible = "thingyjp,breadbee-crust", "mstar,infinity";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity-msc313.dtsi b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
new file mode 100644
index 000000000..3499fde26
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity-msc313.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-infinity.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
new file mode 100644
index 000000000..cd911adef
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x16000>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
new file mode 100644
index 000000000..f0eda80a9
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity3-msc313e.dtsi"
+
+/ {
+	model = "BreadBee";
+	compatible = "thingyjp,breadbee", "mstar,infinity3";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
new file mode 100644
index 000000000..f581b6f89
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity3-msc313e.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-infinity3.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
new file mode 100644
index 000000000..9857e2a99
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-infinity.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
new file mode 100644
index 000000000..7306b737d
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n-midrived08.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-mercury5-ssc8336n.dtsi"
+
+/ {
+	model = "70mai Midrive D08";
+	compatible = "70mai,midrived08", "mstar,mercury5";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
new file mode 100644
index 000000000..3f5a4c029
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-mercury5-ssc8336n.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-mercury5.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-mercury5.dtsi b/arch/arm/boot/dts/mstar-mercury5.dtsi
new file mode 100644
index 000000000..a7d0dd9d6
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-mercury5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
new file mode 100644
index 000000000..f07880561
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	arch_timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * we shouldn't need this but the vendor
+		 * u-boot is broken
+		 */
+		clock-frequency = <6000000>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x16001000 0x16001000 0x00007000>,
+			 <0x1f000000 0x1f000000 0x00400000>,
+			 <0xa0000000 0xa0000000 0x20000>;
+
+		gic: interrupt-controller@16001000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x16001000 0x1000>,
+			      <0x16002000 0x2000>,
+			      <0x16004000 0x2000>,
+			      <0x16006000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
+					| IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		riu: bus@1f000000 {
+			compatible = "simple-bus";
+			reg = <0x1f000000 0x00400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1f000000 0x00400000>;
+
+			pmsleep: syscon@1c00 {
+				compatible = "mstar,msc313-pmsleep", "syscon";
+				reg = <0x1c00 0x100>;
+			};
+
+			reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmsleep>;
+				offset = <0xb8>;
+				mask = <0x79>;
+			};
+
+			intc_fiq: interrupt-controller@201310 {
+				compatible = "mstar,mst-intc";
+				reg = <0x201310 0x40>;
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				mstar,irqs-map-range = <96 127>;
+			};
+
+			intc_irq: interrupt-controller@201350 {
+				compatible = "mstar,mst-intc";
+				reg = <0x201350 0x40>;
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				mstar,irqs-map-range = <32 95>;
+				mstar,intc-no-eoi;
+			};
+
+			l3bridge: l3bridge@204400 {
+				compatible = "mstar,l3bridge";
+				reg = <0x204400 0x200>;
+			};
+
+			pm_uart: uart@221000 {
+				compatible = "ns16550a";
+				reg = <0x221000 0x100>;
+				reg-shift = <3>;
+				interrupts-extended = <&intc_irq GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <172000000>;
+				status = "disabled";
+			};
+		};
+
+		imi: sram@a0000000 {
+			compatible = "mmio-sram";
+			reg = <0xa0000000 0x10000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
new file mode 100644
index 000000000..d1535f385
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt2701.dtsi"
+
+/ {
+	model = "MediaTek MT2701 evaluation board";
+	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	sound:sound {
+		compatible = "mediatek,mt2701-cs42448-machine";
+		mediatek,platform = <&afe>;
+		/* CS42448 Machine name */
+		audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "AMIC",
+		"AIN1R", "AMIC",
+		"AIN2L", "Tuner In",
+		"AIN2R", "Tuner In",
+		"AIN3L", "Satellite Tuner In",
+		"AIN3R", "Satellite Tuner In",
+		"AIN3L", "AUX In",
+		"AIN3R", "AUX In";
+		mediatek,audio-codec = <&cs42448>;
+		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_pins_default>;
+		i2s1-in-sel-gpio1 = <&pio 53 0>;
+		i2s1-in-sel-gpio2 = <&pio 54 0>;
+		status = "okay";
+	};
+
+	bt_sco_codec:bt_sco_codec {
+		compatible = "linux,bt-sco";
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&bls 0 100000>;
+		brightness-levels = <
+			  0  16  32  48  64  80  96 112
+			128 144 160 176 192 208 224 240
+			255
+		>;
+		default-brightness-level = <9>;
+	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&bls {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_bls_gpio>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+	cs42448: cs42448@48 {
+		compatible = "cirrus,cs42448";
+		reg = <0x48>;
+		clocks = <&topckgen CLK_TOP_AUD_I2S1_MCLK>;
+		clock-names = "mclk";
+	};
+};
+
+&pio {
+	i2c0_pins_a: i2c0@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+				 <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+				 <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2@0 {
+		pins1 {
+			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+				 <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	pwm_bls_gpio: pwm_bls_gpio {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
+		};
+	};
+
+	spi_pins_a: spi0@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
+				 <MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK>,
+				 <MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI>,
+				 <MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO>;
+			bias-disable;
+		};
+	};
+
+	aud_pins_default: audiodefault {
+		pins_cmd_dat {
+			pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>,
+				 <MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN>,
+				 <MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK>,
+				 <MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK>,
+				 <MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK>,
+				 <MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA>,
+				 <MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN>,
+				 <MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK>,
+				 <MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK>,
+				 <MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK>,
+				 <MT2701_PIN_203_PWM0__FUNC_I2S2_DATA>,
+				 <MT2701_PIN_204_PWM1__FUNC_I2S3_DATA>,
+				 <MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53>,
+				 <MT2701_PIN_54_SPI0_CK__FUNC_GPIO54>,
+				 <MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK>,
+				 <MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC>,
+				 <MT2701_PIN_20_PCM_RX__FUNC_MRG_TX>,
+				 <MT2701_PIN_21_PCM_TX__FUNC_MRG_RX>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	spi_pins_b: spi1@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
+				 <MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI>,
+				 <MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO>,
+				 <MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_c: spi2@0 {
+		pins_spi {
+			pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
+				 <MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI>,
+				 <MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO>,
+				 <MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK>;
+			bias-disable;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_b>;
+	status = "disabled";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_c>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pio {
+	nor_pins_default: nor {
+		pins1 {
+			pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>,
+				 <MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK>,
+				 <MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0>,
+				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
+				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
+				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+	usb-role-switch;
+	connector{
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h
new file mode 100644
index 000000000..136a25a0a
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-pinfunc.h
@@ -0,0 +1,727 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Biao Huang <biao.huang@mediatek.com>
+ */
+
+#ifndef __DTS_MT2701_PINFUNC_H
+#define __DTS_MT2701_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2)
+
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2)
+
+#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1)
+
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1)
+
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1)
+
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5)
+
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7)
+
+#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7)
+
+#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2)
+#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4)
+#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7)
+
+#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2)
+#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4)
+#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7)
+
+#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1)
+
+#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1)
+
+#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1)
+
+#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1)
+
+#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1)
+#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2)
+#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5)
+#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7)
+
+#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1)
+#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2)
+#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7)
+
+#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4)
+#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5)
+#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6)
+#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7)
+
+#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7)
+
+#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4)
+#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5)
+#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6)
+#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7)
+
+#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4)
+#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5)
+#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6)
+#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7)
+
+#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1)
+#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3)
+#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4)
+#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5)
+#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7)
+#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10)
+
+#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1)
+#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3)
+#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4)
+#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
+#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7)
+#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10)
+
+#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1)
+#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3)
+#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4)
+#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7)
+#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10)
+
+#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1)
+#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3)
+#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4)
+#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7)
+
+#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1)
+#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2)
+#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5)
+#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6)
+#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7)
+
+#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1)
+#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2)
+#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3)
+#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4)
+#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6)
+#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7)
+
+#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1)
+#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3)
+#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4)
+#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6)
+#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7)
+
+#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1)
+#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2)
+#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5)
+#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7)
+#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14)
+
+#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7)
+
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7)
+
+#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7)
+
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7)
+
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7)
+
+#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3)
+#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4)
+
+#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3)
+#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4)
+
+#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1)
+#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2)
+#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4)
+
+#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1)
+#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2)
+#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4)
+
+#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1)
+#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2)
+
+#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1)
+#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2)
+
+#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1)
+#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2)
+
+#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1)
+
+#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1)
+#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2)
+
+#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1)
+#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2)
+
+#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7)
+
+#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7)
+
+#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3)
+#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4)
+#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7)
+
+#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2)
+#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3)
+#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4)
+#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5)
+#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7)
+
+#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3)
+#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7)
+
+#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1)
+
+#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1)
+
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7)
+
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7)
+
+#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7)
+
+#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1)
+
+#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1)
+
+#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1)
+
+#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1)
+
+#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1)
+#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2)
+#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5)
+
+#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1)
+#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2)
+
+#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1)
+#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2)
+
+#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1)
+#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2)
+
+#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1)
+#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2)
+#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7)
+
+#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
+#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7)
+
+#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1)
+
+#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1)
+
+#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1)
+
+#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1)
+
+#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1)
+
+#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1)
+
+#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1)
+
+#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1)
+
+#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1)
+
+#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0)
+#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1)
+
+#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4)
+
+#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3)
+#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4)
+
+#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3)
+#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4)
+
+#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4)
+
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7)
+
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7)
+
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7)
+
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7)
+
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7)
+
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7)
+
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4)
+
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4)
+
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4)
+
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4)
+
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4)
+
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4)
+
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4)
+
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4)
+
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4)
+
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4)
+
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5)
+
+#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1)
+#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4)
+#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5)
+
+#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1)
+#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4)
+#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5)
+
+#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1)
+#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4)
+#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5)
+
+#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1)
+#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4)
+#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5)
+
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7)
+
+#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7)
+
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7)
+
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7)
+
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1)
+
+#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1)
+#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2)
+#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5)
+#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7)
+#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9)
+
+#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1)
+#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2)
+#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5)
+#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7)
+#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9)
+
+#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1)
+#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2)
+#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5)
+#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7)
+
+#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1)
+#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2)
+#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3)
+#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5)
+#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7)
+
+#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1)
+#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2)
+#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3)
+#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5)
+#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7)
+
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11)
+
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11)
+
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7)
+
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2)
+
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2)
+
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2)
+
+#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1)
+
+#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1)
+
+#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1)
+#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2)
+#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3)
+#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4)
+#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7)
+
+#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1)
+#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2)
+#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3)
+#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4)
+#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7)
+
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1)
+
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1)
+
+#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1)
+
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1)
+
+#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9)
+
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9)
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14)
+
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9)
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14)
+
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9)
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14)
+
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9)
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14)
+
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9)
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14)
+
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9)
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14)
+
+#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9)
+
+#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9)
+
+#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9)
+
+#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9)
+
+#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9)
+
+#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7)
+
+#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1)
+
+#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1)
+#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6)
+
+#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1)
+#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6)
+
+#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1)
+#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6)
+
+#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1)
+#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6)
+
+#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1)
+
+#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1)
+
+#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1)
+
+#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1)
+
+#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0)
+#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1)
+
+#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
+#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
+
+#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
+#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
+
+#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0)
+#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1)
+#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6)
+
+#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0)
+#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1)
+#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6)
+
+#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0)
+#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1)
+
+#endif /* __DTS_MT2701_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
new file mode 100644
index 000000000..fade14284
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include "mt2701-pinfunc.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt2701";
+	interrupt-parent = <&cirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	clk26m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	rtc32k: oscillator@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <1000>;
+
+			trips {
+				threshold: trip-point@0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point@1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit@0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2701-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2701-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2701-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt2701-scpsys", "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt2701-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt2701-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pio: pinctrl@1000b000 {
+		compatible = "mediatek,mt2701-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt2701-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	cirq: interrupt-controller@10204000 {
+		compatible = "mediatek,mt2701-cirq",
+			     "mediatek,mtk-cirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&sysirq>;
+		reg = <0 0x10204000 0 0x400>;
+		mediatek,ext-irq-range = <32 200>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2701-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <0>;
+		compatible = "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+	};
+
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt2701-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0xe0>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt2701-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt2701-audio";
+			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names	= "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2701-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt2701-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	jpegenc: jpegenc@1500a000 {
+		compatible = "mediatek,mt2701-jpgenc",
+			     "mediatek,mtk-jpgenc";
+		reg = <0 0x1500a000 0 0x1000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_VENC>;
+		clock-names = "jpgenc";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt2701-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt2701-hifsys", "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb0: usb@1a1c0000 {
+		compatible = "mediatek,mt8173-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy0: usb-phy@1a1c4000 {
+		compatible = "mediatek,mt2701-u3phy";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a240000 {
+		compatible = "mediatek,mt8173-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: usb-phy@1a244000 {
+		compatible = "mediatek,mt2701-u3phy";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@11200000 {
+		compatible = "mediatek,mt2701-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy0: usb-phy@11210000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "okay";
+
+		u2port2: usb-phy@1a1c4800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt2701-ethsys", "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt2701-eth", "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt2701-bdpsys", "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
new file mode 100644
index 000000000..7fda40ab5
--- /dev/null
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+&pwrap {
+	pmic: mt6323 {
+		compatible = "mediatek,mt6323";
+		interrupt-parent = <&pio>;
+		interrupts = <150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6323_leds: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mt6323regulator: mt6323regulator{
+			compatible = "mediatek,mt6323-regulator";
+
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts
new file mode 100644
index 000000000..755a0774a
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580-evbp1.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi
new file mode 100644
index 000000000..9e17698c0
--- /dev/null
+++ b/arch/arm/boot/dts/mt6580.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6580";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6580-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6580-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11006000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
new file mode 100644
index 000000000..1e7079a3b
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "bq Aquaris5";
+	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+
+	chosen {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
new file mode 100644
index 000000000..f3ccb70c0
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+*/
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6589";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6589-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10200100 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11007000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11008000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11009000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@10000000 {
+			compatible = "mediatek,mt6589-wdt";
+			reg = <0x10000000 0x44>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mt6592-evb.dts
new file mode 100644
index 000000000..5e00c1cca
--- /dev/null
+++ b/arch/arm/boot/dts/mt6592-evb.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6592.dtsi"
+
+/ {
+	model = "mt6592 evb";
+	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mt6592.dtsi
new file mode 100644
index 000000000..3716f8db9
--- /dev/null
+++ b/arch/arm/boot/dts/mt6592.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6592";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x4>;
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x5>;
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x6>;
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x7>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200220 {
+		compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200220 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
new file mode 100644
index 000000000..aea680950
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -0,0 +1,1267 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: John Crispin <john@phrozen.org>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
+#include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt2701-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-98000000 {
+			opp-hz = /bits/ 64 <98000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-198000000 {
+			opp-hz = /bits/ 64 <198000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-398000000 {
+			opp-hz = /bits/ 64 <398000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			clocks = <&infracfg CLK_INFRA_CPUSEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			clock-frequency = <1300000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc32k: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "rtc32k";
+	};
+
+	clk26m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	thermal-zones {
+			cpu_thermal: cpu-thermal {
+				polling-delay-passive = <1000>;
+				polling-delay = <1000>;
+
+				thermal-sensors = <&thermal 0>;
+
+				trips {
+					cpu_passive: cpu-passive {
+						temperature = <47000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_active: cpu-active {
+						temperature = <67000>;
+						hysteresis = <2000>;
+						type = "active";
+					};
+
+					cpu_hot: cpu-hot {
+						temperature = <87000>;
+						hysteresis = <2000>;
+						type = "hot";
+					};
+
+					cpu-crit {
+						temperature = <107000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt7623-topckgen",
+			     "mediatek,mt2701-topckgen",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt7623-infracfg",
+			     "mediatek,mt2701-infracfg",
+			     "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible =  "mediatek,mt7623-pericfg",
+			      "mediatek,mt2701-pericfg",
+			      "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt7623-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg@10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt7623-scpsys",
+			     "mediatek,mt2701-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "mm", "mfg", "ethif";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt7623-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt7623-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc32k>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	pwrap: pwrap@1000d000 {
+		compatible = "mediatek,mt7623-pwrap",
+			     "mediatek,mt2701-pwrap";
+		reg = <0 0x1000d000 0 0x1000>;
+		reg-names = "pwrap";
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&infracfg MT2701_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMICSPI>,
+			 <&infracfg CLK_INFRA_PMICWRAP>;
+		clock-names = "spi", "wrap";
+	};
+
+	cir: cir@10013000 {
+		compatible = "mediatek,mt7623-cir";
+		reg = <0 0x10013000 0 0x1000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_IRRX>;
+		clock-names = "clk";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt7623-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt7623-efuse",
+			     "mediatek,mt8173-efuse";
+		reg = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		thermal_calibration_data: calib@424 {
+			reg = <0x424 0xc>;
+		};
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt7623-apmixedsys",
+			     "mediatek,mt2701-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	rng: rng@1020f000 {
+		compatible = "mediatek,mt7623-rng";
+		reg = <0 0x1020f000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_TRNG>;
+		clock-names = "rng";
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x2000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt7623-auxadc",
+			     "mediatek,mt2701-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART0_SEL>,
+			 <&pericfg CLK_PERI_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART2_SEL>,
+			 <&pericfg CLK_PERI_UART2>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART3_SEL>,
+			 <&pericfg CLK_PERI_UART3>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7623-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>;
+		clock-names = "top", "main", "pwm1", "pwm2",
+			      "pwm3", "pwm4", "pwm5";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7623-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt7623-thermal",
+			     "mediatek,mt2701-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7623-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF>;
+		clock-names = "main";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt7623-nfc",
+			     "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7623-ecc",
+			     "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt7623-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_FLASH>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi2: spi@11017000 {
+		compatible = "mediatek,mt7623-spi",
+			     "mediatek,mt2701-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11017000 0 0x1000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI2_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7623-audsys",
+			     "mediatek,mt2701-audsys",
+			     "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt7623-audio",
+				     "mediatek,mt2701-audio";
+			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names	= "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&topckgen CLK_TOP_MSDC30_0_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7623-mmc",
+			     "mediatek,mt2701-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_MSDC30_1_SEL>;
+		clock-names = "source", "hclk";
+		status = "disabled";
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt7623-vdecsys",
+			     "mediatek,mt2701-vdecsys",
+			     "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_port PHY_TYPE_PCIE>,
+		       <&pcie1_port PHY_TYPE_PCIE>,
+		       <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		status = "disabled";
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			status = "disabled";
+		};
+	};
+
+	pcie0_phy: pcie-phy@1a149000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x1a149000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie0_port: pcie-phy@1a149900 {
+			reg = <0 0x1a149900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1_phy: pcie-phy@1a14a000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x1a14a000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		pcie1_port: pcie-phy@1a14a900 {
+			reg = <0 0x1a14a900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb1: usb@1a1c0000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a1c0000 0 0x1000>,
+		      <0 0x1a1c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy1: usb-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt2701-u3phy";
+		reg = <0 0x1a1c4000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a1c4800 {
+			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@1a1c4900 {
+			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	usb2: usb@1a240000 {
+		compatible = "mediatek,mt7623-xhci",
+			     "mediatek,mt8173-xhci";
+		reg = <0 0x1a240000 0 0x1000>,
+		      <0 0x1a244700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+			 <&topckgen CLK_TOP_ETHIF_SEL>;
+		clock-names = "sys_ck", "ref_ck";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+		status = "disabled";
+	};
+
+	u3phy2: usb-phy@1a244000 {
+		compatible = "mediatek,mt7623-u3phy",
+			     "mediatek,mt2701-u3phy";
+		reg = <0 0x1a244000 0 0x0700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port1: usb-phy@1a244800 {
+			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@1a244900 {
+			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7623-ethsys",
+			     "mediatek,mt2701-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7623-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		#dma-cells = <1>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7623-eth",
+			     "mediatek,mt2701-eth",
+			     "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&ethsys CLK_ETHSYS_ESW>,
+			 <&ethsys CLK_ETHSYS_GP1>,
+			 <&ethsys CLK_ETHSYS_GP2>,
+			 <&apmixedsys CLK_APMIXED_TRGPLL>;
+		clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
+		resets = <&ethsys MT2701_ETHSYS_FE_RST>,
+			 <&ethsys MT2701_ETHSYS_GMAC_RST>,
+			 <&ethsys MT2701_ETHSYS_PPE_RST>;
+		reset-names = "fe", "gmac", "ppe";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,pctl = <&syscfg_pctl_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	crypto: crypto@1b240000 {
+		compatible = "mediatek,eip97-crypto";
+		reg = <0 0x1b240000 0 0x20000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+		clock-names = "cryp";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		status = "disabled";
+	};
+
+	bdpsys: syscon@1c000000 {
+		compatible = "mediatek,mt7623-bdpsys",
+			     "mediatek,mt2701-bdpsys",
+			     "syscon";
+		reg = <0 0x1c000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
+
+&pio {
+	cir_pins_a:cir-default {
+		pins-cir {
+			pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
+			bias-disable;
+		};
+	};
+
+	i2c0_pins_a: i2c0-default {
+		pins-i2c0 {
+			pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
+				 <MT7623_PIN_76_SCL0_FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1-default {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
+				 <MT7623_PIN_58_SCL1_FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_b: i2c1-alt {
+		pin-i2c1 {
+			pinmux = <MT7623_PIN_242_URTS2_FUNC_SCL1>,
+				 <MT7623_PIN_243_UCTS2_FUNC_SDA1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2-default {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
+				 <MT7623_PIN_78_SCL2_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_b: i2c2-alt {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
+				 <MT7623_PIN_123_HTPLG_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2s0_pins_a: i2s0-default {
+		pin-i2s0 {
+			pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
+				 <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
+				 <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>,
+				 <MT7623_PIN_74_I2S0_BCK_FUNC_I2S0_BCK>,
+				 <MT7623_PIN_126_I2S0_MCLK_FUNC_I2S0_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	i2s1_pins_a: i2s1-default {
+		pin-i2s1 {
+			pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
+				 <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
+				 <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>,
+				 <MT7623_PIN_36_I2S1_LRCK_FUNC_I2S1_LRCK>,
+				 <MT7623_PIN_37_I2S1_MCLK_FUNC_I2S1_MCLK>;
+			drive-strength = <MTK_DRIVE_12mA>;
+			bias-pull-down;
+		};
+	};
+
+	key_pins_a: keys-alt {
+		pins-keys {
+			pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
+				 <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
+			input-enable;
+		};
+	};
+
+	led_pins_a: leds-alt {
+		pins-leds {
+			pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
+				 <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
+				 <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
+				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins-wp {
+			pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-insert {
+			pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins-cmd-dat {
+			pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>,
+				 <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>,
+				 <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>,
+				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
+				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-clk {
+			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nand_pins_default: nanddefault {
+		pins-ale {
+			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-dat {
+			pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+				 <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+				 <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+				 <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+				 <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+				 <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up;
+		};
+
+		pins-we {
+			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	pcie_default: pcie_pin_default {
+		pins_cmd_dat {
+			pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
+				 <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
+			bias-disable;
+		};
+	};
+
+	pwm_pins_a: pwm-default {
+		pins-pwm {
+			pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
+				 <MT7623_PIN_204_PWM1_FUNC_PWM1>,
+				 <MT7623_PIN_205_PWM2_FUNC_PWM2>,
+				 <MT7623_PIN_206_PWM3_FUNC_PWM3>,
+				 <MT7623_PIN_207_PWM4_FUNC_PWM4>;
+		};
+	};
+
+	spi0_pins_a: spi0-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+				<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+				<MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+				<MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins_a: spi1-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_7_SPI1_CSN_FUNC_SPI1_CS>,
+				<MT7623_PIN_199_SPI1_CK_FUNC_SPI1_CK>,
+				<MT7623_PIN_8_SPI1_MI_FUNC_SPI1_MI>,
+				<MT7623_PIN_9_SPI1_MO_FUNC_SPI1_MO>;
+		};
+	};
+
+	spi2_pins_a: spi2-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
+				 <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
+				 <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
+				 <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
+		};
+	};
+
+	uart0_pins_a: uart0-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
+				 <MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_a: uart1-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins_a: uart2-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
+				 <MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
+		};
+	};
+
+	uart2_pins_b: uart2-alt {
+		pins-dat {
+			pinmux = <MT7623_PIN_200_URXD2_FUNC_URXD2>,
+				 <MT7623_PIN_201_UTXD2_FUNC_UTXD2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
new file mode 100644
index 000000000..13c86936d
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with eMMC reference board";
+	compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "trgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
new file mode 100644
index 000000000..88d8f0b2f
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623a.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623A with NAND reference board";
+	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "trgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_b>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_default>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		spare_per_sector = <64>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <12>;
+		nand-ecc-step-size = <1024>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "preloader";
+				reg = <0x0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+
+			partition@c0000 {
+				label = "uboot-env";
+				reg = <0xC0000 0x40000>;
+			};
+
+			partition@140000 {
+				label = "bootimg";
+				reg = <0x140000 0x2000000>;
+			};
+
+			partition@2140000 {
+				label = "recovery";
+				reg = <0x2140000 0x2000000>;
+			};
+
+			partition@4140000 {
+				label = "rootfs";
+				reg = <0x4140000 0x1000000>;
+			};
+
+			partition@5140000 {
+				label = "usrdata";
+				reg = <0x5140000 0x1000000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
new file mode 100644
index 000000000..0735a1fb8
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&eth {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&nandc {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+	compatible = "mediatek,mt7623a-scpsys";
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+	clock-names = "ethif";
+};
+
+&usb1 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
new file mode 100644
index 000000000..e96aa0ed1
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -0,0 +1,417 @@
+/*
+ * Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "Bananapi BPI-R2";
+	compatible = "bananapi,bpi-r2", "mediatek,mt7623";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vgpu: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed_vgpu";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		blue {
+			label = "bpi-r2:pio:blue";
+			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		green {
+			label = "bpi-r2:pio:green";
+			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		red {
+			label = "bpi-r2:pio:red";
+			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "trgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mali {
+	mali-supply = <&reg_vgpu>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&mt6323_leds {
+	status = "okay";
+
+	led@0 {
+		reg = <0>;
+		label = "bpi-r2:isink:green";
+		default-state = "off";
+	};
+
+	led@1 {
+		reg = <1>;
+		label = "bpi-r2:isink:red";
+		default-state = "off";
+	};
+
+	led@2 {
+		reg = <2>;
+		label = "bpi-r2:isink:blue";
+		default-state = "off";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usb2 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
new file mode 100644
index 000000000..1b9b9a814
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623n.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623N with eMMC reference board";
+	compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&bls {
+	status = "okay";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cec {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dpi0_out: endpoint {
+				remote-endpoint = <&hdmi0_in>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "trgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+
+		switch@0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins_a>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			hdmi0_in: endpoint {
+				remote-endpoint = <&dpi0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmiddc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ddc_pins_a>;
+	status = "okay";
+};
+
+&hdmi_phy {
+	mediatek,ibias = <0xa>;
+	mediatek,ibias_up = <0x1c>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
new file mode 100644
index 000000000..1880ac9e3
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2017-2020 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
+ *
+ */
+
+#include "mt7623.dtsi"
+#include <dt-bindings/memory/mt2701-larb-port.h>
+
+/ {
+	aliases {
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	g3dsys: syscon@13000000 {
+		compatible = "mediatek,mt7623-g3dsys",
+			     "mediatek,mt2701-g3dsys",
+			     "syscon";
+		reg = <0 0x13000000 0 0x200>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+				  "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt7623-mmsys",
+			     "mediatek,mt2701-mmsys",
+			     "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x14010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <0>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <1>;
+		clocks = <&vdecsys CLK_VDEC_CKGEN>,
+			 <&vdecsys CLK_VDEC_LARB>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt7623-smi-larb",
+			     "mediatek,mt2701-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common>;
+		mediatek,larb-id = <2>;
+		clocks = <&imgsys CLK_IMG_SMI_COMM>,
+			 <&imgsys CLK_IMG_SMI_COMM>;
+		clock-names = "apb", "smi";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt7623-imgsys",
+			     "mediatek,mt2701-imgsys",
+			     "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	iommu: mmsys_iommu@10205000 {
+		compatible = "mediatek,mt7623-m4u",
+			     "mediatek,mt2701-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,larbs = <&larb0 &larb1 &larb2>;
+		#iommu-cells = <1>;
+	};
+
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt7623-jpgdec",
+			     "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};
+
+	smi_common: smi@1000c000 {
+		compatible = "mediatek,mt7623-smi-common",
+			     "mediatek,mt2701-smi-common";
+		reg = <0 0x1000c000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_SMI>,
+			 <&mmsys CLK_MM_SMI_COMMON>,
+			 <&infracfg CLK_INFRA_SMI>;
+		clock-names = "apb", "smi", "async";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+	};
+
+	ovl: ovl@14007000 {
+		compatible = "mediatek,mt7623-disp-ovl",
+			     "mediatek,mt2701-disp-ovl";
+		reg = <0 0x14007000 0 0x1000>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_OVL>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+		mediatek,larb = <&larb0>;
+	};
+
+	rdma0: rdma@14008000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14008000 0 0x1000>;
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	wdma@14009000 {
+		compatible = "mediatek,mt7623-disp-wdma",
+			     "mediatek,mt2701-disp-wdma";
+		reg = <0 0x14009000 0 0x1000>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_WDMA>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+		mediatek,larb = <&larb0>;
+	};
+
+	bls: pwm@1400a000 {
+		compatible = "mediatek,mt7623-disp-pwm",
+			     "mediatek,mt2701-disp-pwm";
+		reg = <0 0x1400a000 0 0x1000>;
+		#pwm-cells = <2>;
+		clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+			 <&mmsys CLK_MM_DISP_BLS>;
+		clock-names = "main", "mm";
+		status = "disabled";
+	};
+
+	color: color@1400b000 {
+		compatible = "mediatek,mt7623-disp-color",
+			     "mediatek,mt2701-disp-color";
+		reg = <0 0x1400b000 0 0x1000>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_COLOR>;
+	};
+
+	dsi: dsi@1400c000 {
+		compatible = "mediatek,mt7623-dsi",
+			     "mediatek,mt2701-dsi";
+		reg = <0 0x1400c000 0 0x1000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+			 <&mmsys CLK_MM_DSI_DIG>,
+			 <&mipi_tx0>;
+		clock-names = "engine", "digital", "hs";
+		phys = <&mipi_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+	};
+
+	mutex: mutex@1400e000 {
+		compatible = "mediatek,mt7623-disp-mutex",
+			     "mediatek,mt2701-disp-mutex";
+		reg = <0 0x1400e000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_MUTEX_32K>;
+	};
+
+	rdma1: rdma@14012000 {
+		compatible = "mediatek,mt7623-disp-rdma",
+			     "mediatek,mt2701-disp-rdma";
+		reg = <0 0x14012000 0 0x1000>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+		mediatek,larb = <&larb0>;
+	};
+
+	dpi0: dpi@14014000 {
+		compatible = "mediatek,mt7623-dpi",
+			     "mediatek,mt2701-dpi";
+		reg = <0 0x14014000 0 0x1000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+			 <&mmsys CLK_MM_DPI1_ENGINE>,
+			 <&apmixedsys CLK_APMIXED_TVDPLL>;
+		clock-names = "pixel", "engine", "pll";
+		status = "disabled";
+	};
+
+	hdmi0: hdmi@14015000 {
+		compatible = "mediatek,mt7623-hdmi",
+			     "mediatek,mt2701-hdmi";
+		reg = <0 0x14015000 0 0x400>;
+		clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+			 <&mmsys CLK_MM_HDMI_PLL>,
+			 <&mmsys CLK_MM_HDMI_AUDIO>,
+			 <&mmsys CLK_MM_HDMI_SPDIF>;
+		clock-names = "pixel", "pll", "bclk", "spdif";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		mediatek,syscon-hdmi = <&mmsys 0x900>;
+		cec = <&cec>;
+		status = "disabled";
+	};
+
+	mipi_tx0: mipi-dphy@10010000 {
+		compatible = "mediatek,mt7623-mipi-tx",
+			     "mediatek,mt2701-mipi-tx";
+		reg = <0 0x10010000 0 0x90>;
+		clocks = <&clk26m>;
+		clock-output-names = "mipi_tx0_pll";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+	};
+
+	cec: cec@10012000 {
+		compatible = "mediatek,mt7623-cec",
+			     "mediatek,mt8173-cec";
+		reg = <0 0x10012000 0 0xbc>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_CEC>;
+		status = "disabled";
+	};
+
+	hdmi_phy: phy@10209100 {
+		compatible = "mediatek,mt7623-hdmi-phy",
+			     "mediatek,mt2701-hdmi-phy";
+		reg = <0 0x10209100 0 0x24>;
+		clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+		clock-names = "pll_ref";
+		clock-output-names = "hdmitx_dig_cts";
+		#clock-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiddc0: i2c@11013000 {
+		compatible = "mediatek,mt7623-hdmi-ddc",
+			     "mediatek,mt8173-hdmi-ddc";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0 0x11013000 0 0x1C>;
+		clocks = <&pericfg CLK_PERI_I2C3>;
+		clock-names = "ddc-i2c";
+		status = "disabled";
+	};
+};
+
+&pio {
+	hdmi_pins_a: hdmi-default {
+		pins-hdmi {
+			pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+			input-enable;
+			bias-pull-down;
+		};
+	};
+
+	hdmi_ddc_pins_a: hdmi_ddc-default {
+		pins-hdmi-ddc {
+			pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+				 <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
new file mode 100644
index 000000000..9980c10c6
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+	model = "MediaTek MT7629 reference board";
+	compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-1 = <&ephy_leds_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&phy0>;
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0x60000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "u-boot-env";
+				reg = <0x60000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@70000 {
+				label = "factory";
+				reg = <0x70000 0x40000>;
+				read-only;
+			};
+
+			partition@b0000 {
+				label = "kernel";
+				reg = <0xb0000 0xb50000>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+};
+
+&pciephy1 {
+	status = "okay";
+};
+
+&pio {
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio";
+		};
+	};
+
+	ephy_leds_pins: ephy-leds-pins {
+		mux {
+			function = "led";
+			groups = "gphy_leds_0", "ephy_leds";
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups =  "i2c_0";
+		};
+
+		conf {
+			pins = "I2C_SDA", "I2C_SCL";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clkreq",
+				 "pcie_pereset",
+				 "pcie_wake";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	qspi_pins: qspi-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spi_pins: spi-pins {
+		mux {
+			function = "spi";
+			groups = "spi_0";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_txd_rxd" ;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_txd_rxd" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
new file mode 100644
index 000000000..5cbb3d244
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt7629-resets.h>
+
+/ {
+	compatible = "mediatek,mt7629";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1250000000>;
+			cci-control-port = <&cci_control2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	clk20m: oscillator-0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "clk20m";
+	};
+
+	clk40m: oscillator-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <20000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		infracfg: syscon@10000000 {
+			compatible = "mediatek,mt7629-infracfg", "syscon";
+			reg = <0x10000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10002000 {
+			compatible = "mediatek,mt7629-pericfg", "syscon";
+			reg = <0x10002000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: power-controller@10006000 {
+			compatible = "mediatek,mt7629-scpsys",
+				     "mediatek,mt7622-scpsys";
+			#power-domain-cells = <1>;
+			reg = <0x10006000 0x1000>;
+			clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			clock-names = "hif_sel";
+			assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			infracfg = <&infracfg>;
+		};
+
+		timer: timer@10009000 {
+			compatible = "mediatek,mt7629-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0x10009000 0x60>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk20m>;
+			clock-names = "clk20m";
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt7629-sysirq",
+				     "mediatek,mt6577-sysirq";
+			reg = <0x10200a80 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt7629-apmixedsys", "syscon";
+			reg = <0x10209000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt7629-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0x1020f000 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_PD>;
+			clock-names = "rng";
+		};
+
+		topckgen: syscon@10210000 {
+			compatible = "mediatek,mt7629-topckgen", "syscon";
+			reg = <0x10210000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@10212000 {
+			compatible = "mediatek,mt7629-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0x10212000 0x100>;
+		};
+
+		pio: pinctrl@10217000 {
+			compatible = "mediatek,mt7629-pinctrl";
+			reg = <0x10217000 0x8000>,
+			      <0x10005000 0x1000>;
+			reg-names = "base", "eint";
+			gpio-controller;
+			gpio-ranges = <&pio 0 0 79>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10300000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10310000 0x1000>,
+			      <0x10320000 0x1000>,
+			      <0x10340000 0x2000>,
+			      <0x10360000 0x2000>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10390000 0x1000>;
+			ranges = <0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART0_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART1_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7629-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART_SEL>,
+				 <&pericfg CLK_PERI_UART2_PD>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt7629-pwm";
+			reg = <0x11006000 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM_PD>,
+				 <&pericfg CLK_PERI_PWM1_PD>;
+			clock-names = "top", "main", "pwm1";
+			assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+			assigned-clock-parents =
+					<&topckgen CLK_TOP_UNIVPLL2_D4>;
+			status = "disabled";
+		};
+
+		i2c: i2c@11007000 {
+			compatible = "mediatek,mt7629-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0x11007000 0x90>,
+			      <0x11000100 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <4>;
+			clocks = <&pericfg CLK_PERI_I2C0_PD>,
+				 <&pericfg CLK_PERI_AP_DMA_PD>;
+			clock-names = "main", "dma";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt7629-spi",
+				     "mediatek,mt7622-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1100a000 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI0_SEL>,
+				 <&pericfg CLK_PERI_SPI0_PD>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		qspi: spi@11014000 {
+			compatible = "mediatek,mt7629-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0x11014000 0xe0>;
+			clocks = <&pericfg CLK_PERI_FLASH_PD>,
+				 <&topckgen CLK_TOP_FLASH_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusbsys: syscon@1a000000 {
+			compatible = "mediatek,mt7629-ssusbsys", "syscon";
+			reg = <0x1a000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		ssusb: usb@1a0c0000 {
+			compatible = "mediatek,mt7629-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0x1a0c0000 0x01000>,
+			      <0x1a0c3e00 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+				 <&ssusbsys CLK_SSUSB_REF_EN>,
+				 <&ssusbsys CLK_SSUSB_MCU_EN>,
+				 <&ssusbsys CLK_SSUSB_DMA_EN>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			status = "disabled";
+		};
+
+		u3phy0: usb-phy@1a0c4000 {
+			compatible = "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a0c4000 0xe00>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0 0x700>;
+				clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		pciesys: syscon@1a100800 {
+			compatible = "mediatek,mt7629-pciesys", "syscon";
+			reg = <0x1a100800 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pcie: pcie@1a140000 {
+			compatible = "mediatek,mt7629-pcie";
+			device_type = "pci";
+			reg = <0x1a140000 0x1000>,
+			      <0x1a145000 0x1000>;
+			reg-names = "subsys","port1";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+				 <&pciesys CLK_PCIE_P0_AHB_EN>,
+				 <&pciesys CLK_PCIE_P1_AUX_EN>,
+				 <&pciesys CLK_PCIE_P1_AXI_EN>,
+				 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+				 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+			clock-names = "sys_ck1", "ahb_ck1",
+				      "aux_ck1", "axi_ck1",
+				      "obff_ck1", "pipe_ck1";
+			assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
+					  <&topckgen CLK_TOP_AXI_SEL>,
+					  <&topckgen CLK_TOP_HIF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+						 <&topckgen CLK_TOP_SYSPLL1_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
+			phys = <&pcieport1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy1";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges;
+				num-lanes = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+						<0 0 0 2 &pcie_intc1 1>,
+						<0 0 0 3 &pcie_intc1 2>,
+						<0 0 0 4 &pcie_intc1 3>;
+
+				pcie_intc1: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		pciephy1: pcie-phy@1a14a000 {
+			compatible = "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1a14a000 0x1000>;
+			status = "disabled";
+
+			pcieport1: port1phy@0 {
+				reg = <0 0x1000>;
+				clocks = <&clk20m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		ethsys: syscon@1b000000 {
+			compatible = "mediatek,mt7629-ethsys", "syscon";
+			reg = <0x1b000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		eth: ethernet@1b100000 {
+			compatible = "mediatek,mt7629-eth","syscon";
+			reg = <0x1b100000 0x20000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&topckgen CLK_TOP_F10M_REF_SEL>,
+				 <&ethsys CLK_ETH_ESW_EN>,
+				 <&ethsys CLK_ETH_GP0_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_FE_EN>,
+				 <&sgmiisys0 CLK_SGMII_TX_EN>,
+				 <&sgmiisys0 CLK_SGMII_RX_EN>,
+				 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII_TX_EN>,
+				 <&sgmiisys1 CLK_SGMII_RX_EN>,
+				 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+				 <&apmixedsys CLK_APMIXED_SGMIPLL>,
+				 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+			clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
+				      "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "sgmii_ck", "eth2pll";
+			assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
+					  <&topckgen CLK_TOP_F10M_REF_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
+						 <&topckgen CLK_TOP_SGMIIPLL_D2>;
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,infracfg = <&infracfg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sgmiisys0: syscon@1b128000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b128000 0x3000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@1b130000 {
+			compatible = "mediatek,mt7629-sgmiisys", "syscon";
+			reg = <0x1b130000 0x3000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mt8127-moose.dts
new file mode 100644
index 000000000..560687af8
--- /dev/null
+++ b/arch/arm/boot/dts/mt8127-moose.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+	model = "MediaTek MT8127 Moose Board";
+	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
new file mode 100644
index 000000000..aced173c2
--- /dev/null
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt8127";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+                };
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8127-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt8127-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200100 0 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x2000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
new file mode 100644
index 000000000..f6147fe62
--- /dev/null
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt8135.dtsi"
+
+/ {
+	model = "MediaTek MT8135 evaluation board";
+	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h
new file mode 100644
index 000000000..ce0cb5a44
--- /dev/null
+++ b/arch/arm/boot/dts/mt8135-pinfunc.h
@@ -0,0 +1,1294 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ */
+
+#ifndef __DTS_MT8135_PINFUNC_H
+#define __DTS_MT8135_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
+
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
+
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
+
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
+
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
+
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
+
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
+
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
+
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
+
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
+
+#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
+#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
+#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
+
+#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
+#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
+#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
+#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
+
+#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
+#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
+#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
+#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
+
+#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
+#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
+#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
+#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
+#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
+#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
+
+#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
+#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
+#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
+#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
+#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
+#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
+
+#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
+#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
+#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
+#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
+#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
+#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
+
+#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
+#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
+#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
+#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
+#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
+#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
+
+#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
+#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
+#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
+#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
+#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
+#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
+#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
+
+#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
+#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
+#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
+#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
+#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
+#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
+#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
+
+#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
+#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
+#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
+#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
+#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
+#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
+#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
+
+#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
+#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
+#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
+#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
+#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
+
+#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
+#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
+#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
+#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
+#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
+
+#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
+#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
+#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
+#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
+#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
+
+#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
+#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
+#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
+#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
+#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
+
+#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
+#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
+#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
+#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
+#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
+
+#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
+#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
+#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
+
+#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
+#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
+#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
+#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
+
+#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
+#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
+#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
+#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
+
+#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
+#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
+#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
+#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
+
+#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
+#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
+#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
+#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
+#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
+
+#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
+#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
+#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
+#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
+#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
+
+#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
+#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
+#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
+#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
+#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
+
+#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
+#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
+#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
+#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
+#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
+
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
+
+#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
+#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
+
+#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
+#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
+#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
+#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
+
+#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
+#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
+
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
+
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
+
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
+
+#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
+#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
+#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
+#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
+#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
+
+#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
+#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
+#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
+#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
+#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
+
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
+
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
+
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
+
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
+
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
+
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
+
+#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
+
+#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
+#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
+
+#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
+#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
+
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
+
+#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
+#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
+#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
+#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
+#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
+#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
+
+#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
+#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
+#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
+#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
+#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
+
+#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
+#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
+#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
+#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
+#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
+
+#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
+#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
+#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
+#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
+
+#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
+#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
+#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
+#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
+
+#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
+#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
+#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
+
+#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
+#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
+#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
+
+#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
+#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
+#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
+
+#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
+#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
+#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
+
+#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
+#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
+#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
+
+#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
+#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
+#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
+
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
+
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
+
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
+
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
+
+#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
+#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
+#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
+#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
+#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
+
+#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
+#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
+#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
+#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
+
+#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
+#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
+#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
+#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
+#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
+
+#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
+#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
+#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
+#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
+
+#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
+#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
+#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
+#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
+#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
+
+#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
+#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
+#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
+#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
+#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
+
+#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
+#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
+#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
+#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
+#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
+
+#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
+#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
+#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
+#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
+#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
+#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
+#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
+
+#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
+#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
+#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
+#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
+#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
+#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
+#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
+
+#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
+#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
+#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
+#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
+#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
+#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
+
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
+
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
+
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
+
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
+
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
+
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
+
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
+
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
+
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
+
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
+
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
+
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
+
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
+
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
+
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
+
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
+
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
+
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
+
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
+
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
+
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
+
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
+
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
+
+#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
+#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
+#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
+#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
+
+#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
+#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
+#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
+#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
+#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
+
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
+
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
+
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
+
+#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
+#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
+#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
+#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
+#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
+#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
+#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
+
+#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
+#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
+#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
+#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
+#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
+#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
+#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
+
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
+
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
+
+#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
+#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
+#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
+#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
+#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
+#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
+#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
+
+#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
+#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
+#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
+#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
+#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
+#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
+#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
+
+#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
+#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
+#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
+#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
+#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
+#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
+#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
+
+#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
+#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
+#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
+#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
+#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
+#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
+#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
+
+#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
+#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
+#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
+#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
+#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
+
+#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
+#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
+#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
+#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
+#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
+
+#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
+#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
+#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
+#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
+#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
+
+#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
+#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
+#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
+
+#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
+#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
+#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
+#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
+#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
+
+#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
+#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
+#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
+#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
+#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
+#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
+
+#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
+#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
+#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
+#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
+
+#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
+#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
+#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
+#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
+
+#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
+#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
+#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
+#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
+#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
+#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
+
+#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
+#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
+#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
+#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
+#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
+
+#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
+#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
+#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
+#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
+
+#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
+#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
+#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
+#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
+
+#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
+#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
+#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
+
+#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
+#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
+#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
+
+#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
+
+#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
+
+#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
+#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
+#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
+#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
+
+#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
+#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
+#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
+#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
+#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
+
+#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
+#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
+#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
+#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
+#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
+
+#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
+#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
+#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
+#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
+#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
+
+#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
+#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
+#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
+#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
+#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
+
+#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
+#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
+#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
+#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
+#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
+
+#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
+#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
+#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
+#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
+#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
+
+#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
+#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
+#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
+#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
+#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
+
+#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
+#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
+#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
+
+#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
+#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
+#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
+
+#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
+#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
+#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
+
+#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
+#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
+#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
+
+#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
+#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
+#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
+
+#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
+#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
+#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
+
+#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
+#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
+#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
+
+#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
+#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
+#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
+
+#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
+#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
+#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
+
+#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
+#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
+#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
+
+#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
+#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
+#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
+
+#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
+#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
+#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
+
+#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
+
+#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
+
+#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
+
+#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
+
+#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
+
+#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
+
+#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
+
+#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
+
+#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
+
+#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
+
+#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
+
+#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
+
+#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
+
+#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
+
+#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
+
+#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
+
+#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+
+#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+
+#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+
+#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+
+#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
+#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
+
+#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
+#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
+
+#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
+#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
+
+#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
+#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
+
+#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
+#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
+
+#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
+#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
+
+#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
+#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
+
+#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
+#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
+
+#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
+#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
+
+#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
+#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
+
+#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
+#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
+
+#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
+#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
+
+#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
+#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
+#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
+#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
+#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
+#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
+
+#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
+#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
+#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
+#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
+
+#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
+#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
+#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
+#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
+
+#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
+#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
+#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
+#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
+
+#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
+#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
+#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
+#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
+#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
+
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
+
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
+
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
+
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
+
+#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
+
+#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
+#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
+#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
+#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
+#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
+
+#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
+#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
+#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
+#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
+#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
+
+#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
+#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
+#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
+#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
+#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
+
+#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
+#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
+#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
+#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
+#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
+
+#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
+#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
+#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
+#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
+#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
+
+#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
+#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
+#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
+#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
+#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
+
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
+
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
+
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
+
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
+
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
+
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
+
+#endif /* __DTS_MT8135_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
new file mode 100644
index 000000000..0e4e83502
--- /dev/null
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt8135-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt8135-resets.h>
+#include "mt8135-pinfunc.h"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "mediatek,mt8135";
+	interrupt-parent = <&sysirq>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&cpu0>;
+			};
+			core1 {
+				cpu = <&cpu1>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&cpu2>;
+			};
+			core1 {
+				cpu = <&cpu3>;
+			};
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		clk26m: clk26m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
+		/*
+		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
+		 * regmap. Register 0x1000b000 is used by EINT.
+		 */
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8135-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8135-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200030 {
+			compatible = "mediatek,mt8135-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
+			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+			reg = <0 0x1020c000 0 0x1000>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x2000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11008000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11009000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
new file mode 100644
index 000000000..e172029a0
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpio-fan,speed-map =
+			<0		3
+			1500	2
+			3250	1
+			5000	0>;
+	};
+};
+
+&pinctrl {
+	pmx_fan_low: pmx-fan-low {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
new file mode 100644
index 000000000..c2d87ba61
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			default-state = "keep";
+		};
+
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_switch: pmx-power-switch {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
new file mode 100644
index 000000000..c6da987b2
--- /dev/null
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
new file mode 100644
index 000000000..41744cc2b
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-classic.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+};
+
+&uart {
+	compatible = "ns16550";
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	clocks = <&apb_pclk>;
+	no-loopback-test;
+};
+
+&timer0 {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+};
+
+&timer1 {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+};
+
+&keypad {
+	active-low;
+
+};
+
+&base_clk {
+	compatible = "lsi,nspire-classic-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-classic-ahb-divider";
+};
+
+
+&vbus_reg {
+	gpio = <&gpio 5 0>;
+};
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x2000000>; /* 32 MB */
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "lsi,zevio-intc";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-classic-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
new file mode 100644
index 000000000..f52f38c61
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-clp.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-clp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00020039
+	0x0004002c 	0x00050034 	0x00060015
+	0x0007000b 	0x0008002d 	0x01000033
+	0x0101004e 	0x01020011 	0x01030004
+	0x0104002f 	0x01050003 	0x01060016
+	0x01070002 	0x01080014 	0x02000062
+	0x0201000c 	0x0202001f 	0x02030007
+	0x02040013 	0x02050006 	0x02060010
+	0x02070005 	0x02080019 	0x03000027
+	0x03010037 	0x03020018 	0x0303000a
+	0x03040031 	0x03050009 	0x03060032
+	0x03070008 	0x03080026 	0x04000028
+	0x04010035 	0x04020025 	0x04040024
+	0x04060017 	0x04080023 	0x05000028
+	0x05020022 	0x0503001b 	0x05040021
+	0x0505001a 	0x05060012 	0x0507006f
+	0x05080020 	0x0509002a 	0x0601001c
+	0x0602002e 	0x06030068 	0x06040030
+	0x0605006d 	0x0606001e 	0x06070001
+	0x0608002b 	0x0609000f 	0x07000067
+	0x0702006a 	0x0704006c 	0x07060069
+	0x0707000e 	0x0708001d 	0x070a000d
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
new file mode 100644
index 000000000..0c16b04e2
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-cx.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+&vbus_reg {
+	gpio = <&gpio 2 0>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-cx-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
new file mode 100644
index 000000000..f7d0faacd
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-tp.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire-tp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
new file mode 100644
index 000000000..90e033d91
--- /dev/null
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/boot/nspire.dtsi
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	bootrom: bootrom@0 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@A4000000 {
+		device = "memory";
+		reg = <0xA4000000 0x20000>;
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	usb_phy: usb_phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	vbus_reg: vbus_reg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB VBUS output";
+		regulator-type = "voltage";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@A9000000 {
+			reg = <0xA9000000 0x1000>;
+		};
+
+		usb0: usb@B0000000 {
+			compatible = "lsi,zevio-usb";
+			reg = <0xB0000000 0x1000>;
+			interrupts = <8>;
+
+			usb-phy = <&usb_phy>;
+			vbus-supply = <&vbus_reg>;
+		};
+
+		usb1: usb@B4000000 {
+			reg = <0xB4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@C0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <21>;
+
+			/*
+			 * We assume the same clock is fed to APB and CLCDCLK.
+			 * There is some code to scale the clock down by a factor
+			 * 48 for the display so likely the frequency to the
+			 * display is 1MHz and the CLCDCLK is 48 MHz.
+			 */
+			clocks = <&apb_pclk>, <&apb_pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+		};
+
+		adc: adc@C4000000 {
+			reg = <0xC4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@C8010000 {
+			reg = <0xC8010000 0x1000>;
+		};
+
+		sha256: crypto@CC000000 {
+			reg = <0xCC000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				compatible = "lsi,zevio-gpio";
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900C0000 {
+				reg = <0x900C0000 0x1000>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			timer1: timer@900D0000 {
+				reg = <0x900D0000 0x1000>;
+				interrupts = <19>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,amba-primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900A0000 {
+				reg = <0x900A0000 0x1000>;
+			};
+
+			pwr: pwr@900B0000 {
+				reg = <0x900B0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900E0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900E0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900F0000 {
+				reg = <0x900F0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
new file mode 100644
index 000000000..d2d076129
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	/* external reference clock */
+	clk_refclk: clk_refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk_sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk_mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk_rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk_rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk_xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0x0 0xf0000000 0x00900000>;
+
+		gcr: gcr@800000 {
+			compatible = "nuvoton,npcm750-gcr", "syscon",
+				"simple-mfd";
+			reg = <0x800000 0x1000>;
+		};
+
+		scu: scu@3fe000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x3fe000 0x1000>;
+		};
+
+		l2: cache-controller@3fc000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x3fc000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			clocks = <&clk 10>;
+			arm,shared-override;
+		};
+
+		gic: interrupt-controller@3ff000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x3ff000 0x1000>,
+				<0x3fe100 0x100>;
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		clk: clock-controller@f0801000 {
+			compatible = "nuvoton,npcm750-clk", "syscon";
+			#clock-cells = <1>;
+			clock-controller;
+			reg = <0xf0801000 0x1000>;
+			clock-names = "refclk", "sysbypck", "mcbypck";
+			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0xf0000000 0x00300000>;
+
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm750-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x50>;
+				clocks = <&clk 5>;
+			};
+
+			watchdog0: watchdog@801C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x801C 0x4>;
+				status = "disabled";
+				clocks = <&clk 5>;
+			};
+
+			watchdog1: watchdog@901C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x901C 0x4>;
+				status = "disabled";
+				clocks = <&clk 5>;
+			};
+
+			watchdog2: watchdog@a01C {
+				compatible = "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xa01C 0x4>;
+				status = "disabled";
+				clocks = <&clk 5>;
+			};
+
+			serial0: serial@1000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x1000 0x1000>;
+				clocks = <&clk 6>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial1: serial@2000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x2000 0x1000>;
+				clocks = <&clk 6>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial2: serial@3000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x3000 0x1000>;
+				clocks = <&clk 6>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial3: serial@4000 {
+				compatible = "nuvoton,npcm750-uart";
+				reg = <0x4000 0x1000>;
+				clocks = <&clk 6>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
new file mode 100644
index 000000000..15f744f1b
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+
+/ {
+	model = "Nuvoton npcm750 Development Board (Device Tree)";
+	compatible = "nuvoton,npcm750";
+
+	chosen {
+		stdout-path = &serial3;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
new file mode 100644
index 000000000..6ac340533
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include "nuvoton-common-npcm7xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk 0>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk 0>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+	soc {
+		timer@3fe600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x3fe600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&clk 5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 000000000..9cf52650f
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000..bc8961f36
--- /dev/null
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
new file mode 100644
index 000000000..d4ad9e58b
--- /dev/null
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <3 0 0x10000000 0x1000000>,	/* CS3: 16MB for UART */
+		 <7 0 0x2c000000 0x01000000>;
+
+	/*
+	 * Four port TL16CP754C serial port on GPMC,
+	 * they probably share the same GPIO IRQ
+	 * REVISIT: Add timing support from slls644g.pdf
+	 */
+	uart@3,0 {
+		compatible = "ns16550a";
+		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <155>;
+		gpmc,cs-wr-off-ns = <155>;
+		gpmc,adv-on-ns = <15>;
+		gpmc,adv-rd-off-ns = <40>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <145>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <145>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <145>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <20>;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <45>;
+		gpmc,wr-access-ns = <145>;
+	};
+	uart@3,1 {
+		compatible = "ns16550a";
+		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+	uart@3,2 {
+		compatible = "ns16550a";
+		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+	uart@3,3 {
+		compatible = "ns16550a";
+		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+
+	ethernet@gpmc {
+		reg = <7 0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
+	};
+};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
new file mode 100644
index 000000000..f9c2a9938
--- /dev/null
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -0,0 +1,341 @@
+/*
+ * Device Tree Source for OMAP2 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+		};
+	};
+
+	pmu {
+		compatible = "arm,arm1136-pmu";
+		interrupts = <3>;
+	};
+
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap2-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		intc: interrupt-controller@1 {
+			compatible = "ti,omap2-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x480FE000 0x1000>;
+		};
+
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&core_l3_ck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap2420-sdma", "ti,omap-sdma";
+				reg = <0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <64>;
+			};
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <52>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@4806e000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		timer2_target: target-module@4802a000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x4802a000 0x4>,
+			      <0x4802a010 0x4>,
+			      <0x4802a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt2_fck>, <&gpt2_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4802a000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap2420-timer";
+				reg = <0 0x400>;
+				interrupts = <38>;
+			};
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap2-dss";
+			reg = <0x48050000 0x400>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap2-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap2-rfbi";
+				reg = <0x48050800 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap2-venc";
+				reg = <0x48050c00 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi
new file mode 100644
index 000000000..00a7a199a
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-clocks.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2420 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+
+&prcm_clocks {
+	sys_clkout2_src_gate: sys_clkout2_src_gate@70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src_mux: sys_clkout2_src_mux@70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src: sys_clkout2_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
+	};
+
+	sys_clkout2: sys_clkout2@70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout2_src>;
+		ti,bit-shift = <11>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gate_ick: dsp_gate_ick@810 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <1>;
+		reg = <0x0810>;
+	};
+
+	dsp_div_ick: dsp_div_ick@840 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_ick: dsp_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
+	};
+
+	iva1_gate_ifck: iva1_gate_ifck@800 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0800>;
+	};
+
+	iva1_div_ifck: iva1_div_ifck@840 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0840>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+	};
+
+	iva1_ifck: iva1_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
+	};
+
+	iva1_ifck_div: iva1_ifck_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&iva1_ifck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck@800 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&iva1_ifck_div>;
+		ti,bit-shift = <8>;
+		reg = <0x0800>;
+	};
+
+	wdt3_ick: wdt3_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0210>;
+	};
+
+	wdt3_fck: wdt3_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0200>;
+	};
+
+	mmc_ick: mmc_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0210>;
+	};
+
+	mmc_fck: mmc_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0200>;
+	};
+
+	eac_ick: eac_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0210>;
+	};
+
+	eac_fck: eac_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0200>;
+	};
+
+	i2c1_fck: i2c1_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0200>;
+	};
+
+	i2c2_fck: i2c2_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0200>;
+	};
+
+	vlynq_ick: vlynq_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0210>;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	core_d18_ck: core_d18_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <18>;
+	};
+
+	vlynq_mux_fck: vlynq_mux_fck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0240>;
+	};
+
+	vlynq_fck: vlynq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
+	};
+
+	iva1_clkdm: iva1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva1_mpu_int_ifck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
+			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
+			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
+			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
+			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "fixed-factor-clock";
+	clocks = <&apll96_ck>;
+	clock-mult = <1>;
+	clock-div = <1>;
+};
+
+&dsp_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
new file mode 100644
index 000000000..af964f139
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap2420.dtsi"
+
+/ {
+	model = "TI OMAP2420 H4 board";
+	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>; /* 64 MB */
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x08000000 0x04000000>;
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		linux,mtd-name= "intel,ge28f256l18b85";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x04000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <20>;
+		gpmc,adv-rd-off-ns = <50>;
+		gpmc,adv-wr-off-ns = <50>;
+		gpmc,oe-on-ns = <60>;
+		gpmc,oe-off-ns = <120>;
+		gpmc,we-on-ns = <60>;
+		gpmc,we-off-ns = <120>;
+		gpmc,rd-cycle-ns = <170>;
+		gpmc,wr-cycle-ns = <170>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0 0x20000>;
+		};
+		partition@20000 {
+			label = "params";
+			reg = <0x20000 0x20000>;
+		};
+		partition@40000 {
+			label = "kernel";
+			reg = <0x40000 0x200000>;
+		};
+		partition@240000 {
+			label = "file-system";
+			reg = <0x240000 0x3dc0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420-n800.dts b/arch/arm/boot/dts/omap2420-n800.dts
new file mode 100644
index 000000000..f06d767e8
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n800.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N800";
+	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/arch/arm/boot/dts/omap2420-n810-wimax.dts b/arch/arm/boot/dts/omap2420-n810-wimax.dts
new file mode 100644
index 000000000..ac9acbd60
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n810-wimax.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810 WiMax";
+	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts
new file mode 100644
index 000000000..09c1dbc0b
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810";
+	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+
+	vio_ape: vio_ape {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_ape";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v28_aic: v28_aic {
+		compatible = "regulator-fixed";
+		regulator-name = "v28_aic";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+};
+
+&omap2420_pmx {
+	mcbsp2_pins: mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1)	/* eac_ac_sclk.mcbsp2_clkx */
+			OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1)	/* eac_ac_fs.mcbsp2_fsx */
+			OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1)	/* eac_ac_din.mcbsp2_dr */
+			OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1)	/* eac_ac_dout.mcbsp2_dx */
+		>;
+	};
+
+	aic33_pins: aic33_pins {
+		pinctrl-single,pins = <
+			OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3)	/* eac_ac_rst.gpio118 */
+			OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2)	/* vlynq_tx1.sys_clkout2 */
+		>;
+	};
+};
+
+&i2c2 {
+	aic33@18 {
+		compatible = "ti,tlv320aic33";
+		reg = <0x18>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&aic33_pins>;
+
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+
+		ai3x-gpio-func = <
+			10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+		ai3x-micbias-vg = <1>; /* 2V */
+
+		AVDD-supply = <&v28_aic>;
+		DRVDD-supply = <&v28_aic>;
+		IOVDD-supply = <&vio_ape>;
+		DVDD-supply = <&vio_ape>;
+
+		assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
+		assigned-clock-parents = <&func_96m_ck>;
+		assigned-clock-rates = <0>, <12000000>;
+	};
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
new file mode 100644
index 000000000..63b0b4921
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "omap2420.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	ocp {
+		i2c0 {
+			compatible = "i2c-cbus-gpio";
+			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+				 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
+				>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			retu: retu@1 {
+				compatible = "nokia,retu";
+				interrupt-parent = <&gpio4>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	pmic@72 {
+		compatible = "menelaus";
+		reg = <0x72>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+
+	/* gpio-irq for dma: 26 */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <127>;
+		gpmc,cs-wr-off-ns = <109>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <18>;
+		gpmc,oe-on-ns = <27>;
+		gpmc,oe-off-ns = <127>;
+		gpmc,we-on-ns = <27>;
+		gpmc,we-off-ns = <72>;
+		gpmc,rd-cycle-ns = <145>;
+		gpmc,wr-cycle-ns = <136>;
+		gpmc,access-ns = <118>;
+		gpmc,page-burst-access-ns = <27>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <9>;
+		gpmc,sync-clk-ps = <27000>;
+
+		/* MTD partition table corresponding to old board-n8x0 file. */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x00080000 0x00200000>;
+		};
+		partition@3 {
+			label = "initfs";
+			reg = <0x00280000 0x00400000>;
+		};
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00680000 0x0f980000>;
+		};
+		partition@5 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x10000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
new file mode 100644
index 000000000..494bf6972
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -0,0 +1,266 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2420", "ti,omap2";
+
+	ocp {
+		l4: l4@48000000 {
+			compatible = "ti,omap2-l4", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x100000>;
+
+			prcm: prcm@8000 {
+				compatible = "ti,omap2-prcm";
+				reg = <0x8000 0x1000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			scm: scm@0 {
+				compatible = "ti,omap2-scm", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#pinctrl-cells = <1>;
+				ranges = <0 0x0 0x1000>;
+
+				omap2420_pmx: pinmux@30 {
+					compatible = "ti,omap2420-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x0113>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					pinctrl-single,register-width = <8>;
+					pinctrl-single,function-mask = <0x3f>;
+				};
+
+				scm_conf: scm_conf@270 {
+					compatible = "syscon";
+					reg = <0x270 0x100>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+
+			target-module@4000 {
+				compatible = "ti,sysc-omap2", "ti,sysc";
+				reg = <0x4000 0x4>,
+				      <0x4004 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				clocks = <&func_32k_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x4000 0x1000>;
+
+				counter32k: counter@0 {
+					compatible = "ti,omap-counter32k";
+					reg = <0 0x20>;
+				};
+			};
+		};
+
+		gpio1: gpio@48018000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x48018000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4801a000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801a000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@4801c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801c000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@4801e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801e000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpmc: gpmc@6800a000 {
+			compatible = "ti,omap2420-gpmc";
+			reg = <0x6800a000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>, <34>;
+			interrupt-names = "dsp", "iva";
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <6>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+			mbox_iva: iva {
+				ti,mbox-tx = <2 1 3>;
+				ti,mbox-rx = <3 1 3>;
+			};
+		};
+
+		timer1_target: target-module@48028000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x48028000 0x4>,
+			      <0x48028010 0x4>,
+			      <0x48028014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt1_fck>, <&gpt1_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48028000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap2420-timer";
+				reg = <0 0x400>;
+				interrupts = <37>;
+				ti,timer-alwon;
+			};
+		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
+	};
+};
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};
+
+#include "omap24xx-clocks.dtsi"
+#include "omap2420-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt1_fck>;
+		assigned-clock-parents = <&func_32k_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi
new file mode 100644
index 000000000..4e5ab5189
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430-clocks.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP2430 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+
+&scm_clocks {
+	mcbsp3_mux_fck: mcbsp3_mux_fck@78 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		reg = <0x78>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck@78 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x78>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+
+	mcbsp5_mux_fck: mcbsp5_mux_fck@78 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x78>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	iva2_1_gate_ick: iva2_1_gate_ick@800 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	iva2_1_div_ick: iva2_1_div_ick@840 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_1_ick: iva2_1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
+	};
+
+	mdm_gate_ick: mdm_gate_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c10>;
+	};
+
+	mdm_div_ick: mdm_div_ick@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0c40>;
+		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
+	};
+
+	mdm_ick: mdm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
+	};
+
+	mdm_osc_ck: mdm_osc_ck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0c00>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0214>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <3>;
+		reg = <0x0204>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0214>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x0204>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0214>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <5>;
+		reg = <0x0204>;
+	};
+
+	mcspi3_ick: mcspi3_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0214>;
+	};
+
+	mcspi3_fck: mcspi3_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0204>;
+	};
+
+	icr_ick: icr_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0410>;
+	};
+
+	i2chs1_fck: i2chs1_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0204>;
+	};
+
+	i2chs2_fck: i2chs2_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0204>;
+	};
+
+	usbhs_ick: usbhs_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_ick: mmchs1_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_fck: mmchs1_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0204>;
+	};
+
+	mmchs2_ick: mmchs2_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0214>;
+	};
+
+	mmchs2_fck: mmchs2_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0204>;
+	};
+
+	gpio5_ick: gpio5_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0214>;
+	};
+
+	gpio5_fck: gpio5_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0204>;
+	};
+
+	mdm_intc_ick: mdm_intc_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0214>;
+	};
+
+	mmchsdb1_fck: mmchsdb1_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0204>;
+	};
+
+	mmchsdb2_fck: mmchsdb2_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0204>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
+			 <&icr_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
+			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
+			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
+			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
+			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
+			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
+			 <&mmchsdb2_fck>;
+	};
+
+	mdm_clkdm: mdm_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mdm_osc_ck>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "ti,mux-clock";
+	clocks = <&apll96_ck>, <&alt_ck>;
+	ti,bit-shift = <4>;
+	reg = <0x0540>;
+};
+
+&dsp_div_fck {
+	ti,max-div = <4>;
+	ti,index-starts-at-one;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,max-div = <5>;
+	ti,index-starts-at-one;
+};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
new file mode 100644
index 000000000..7d27e9075
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap2430.dtsi"
+
+/ {
+	model = "TI OMAP2430 SDP";
+	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+#include "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+&gpmc {
+	ranges = <5 0 0x08000000 0x01000000>;
+	ethernet@gpmc {
+		compatible = "smsc,lan91c94";
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
+		reg = <5 0x300 0xf>;
+		bank-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,mux-add-data = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <187>;
+		gpmc,cs-wr-off-ns = <187>;
+		gpmc,adv-on-ns = <18>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <60>;
+		gpmc,oe-off-ns = <169>;
+		gpmc,we-on-ns = <66>;
+		gpmc,we-off-ns = <169>;
+		gpmc,rd-cycle-ns = <187>;
+		gpmc,wr-cycle-ns = <187>;
+		gpmc,access-ns = <187>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <24>;
+		gpmc,cycle2cycle-delay-ns = <24>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
new file mode 100644
index 000000000..d19d8ba3b
--- /dev/null
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -0,0 +1,369 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2";
+
+	ocp {
+		l4_wkup: l4_wkup@49000000 {
+			compatible = "ti,omap2-l4-wkup", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x49000000 0x31000>;
+
+			prcm: prcm@6000 {
+				compatible = "ti,omap2-prcm";
+				reg = <0x6000 0x1000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			scm: scm@2000 {
+				compatible = "ti,omap2-scm", "simple-bus";
+				reg = <0x2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#pinctrl-cells = <1>;
+				ranges = <0 0x2000 0x1000>;
+
+				omap2430_pmx: pinmux@30 {
+					compatible = "ti,omap2430-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x0154>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					pinctrl-single,register-width = <8>;
+					pinctrl-single,function-mask = <0x3f>;
+				};
+
+				scm_conf: scm_conf@270 {
+					compatible = "syscon",
+						     "simple-bus";
+					reg = <0x270 0x240>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x270 0x240>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+
+					pbias_regulator: pbias_regulator@230 {
+						compatible = "ti,pbias-omap2", "ti,pbias-omap";
+						reg = <0x230 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap2430 {
+							regulator-name = "pbias_mmc_omap2430";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3000000>;
+						};
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+
+			target-module@20000 {
+				compatible = "ti,sysc-omap2", "ti,sysc";
+				reg = <0x20000 0x4>,
+				      <0x20004 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				clocks = <&func_32k_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x20000 0x1000>;
+
+				counter32k: counter@0 {
+					compatible = "ti,omap-counter32k";
+					reg = <0 0x20>;
+				};
+			};
+		};
+
+		gpio1: gpio@4900c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900c000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4900e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900e000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@49010000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49010000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@49012000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49012000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio5: gpio@480b6000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x480b6000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap2430-gpmc";
+			reg = <0x6e000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <64>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>, /* RX interrupt */
+				     <61>; /* RX overflow interrupt */
+			interrupt-names = "common", "tx", "rx", "rx_overflow";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@4808c000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808c000 0xff>;
+			reg-names = "mpu";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@4808e000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808e000 0xff>;
+			reg-names = "mpu";
+			interrupts = <18>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <19>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+			dmas = <&sdma 21>,
+			       <&sdma 22>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <6>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+		};
+
+		timer1_target: target-module@49018000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x49018000 0x4>,
+			      <0x49018010 0x4>,
+			      <0x49018014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt1_fck>, <&gpt1_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49018000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap2420-timer";
+				reg = <0 0x400>;
+				interrupts = <37>;
+				ti,timer-alwon;
+			};
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
+	};
+};
+
+&sdma {
+	compatible = "ti,omap2430-sdma", "ti,omap-sdma";
+};
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};
+
+#include "omap24xx-clocks.dtsi"
+#include "omap2430-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt1_fck>;
+		assigned-clock-parents = <&func_32k_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi
new file mode 100644
index 000000000..07af87edf
--- /dev/null
+++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi
@@ -0,0 +1,1241 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP24xx clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ */
+&scm_clocks {
+	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x4>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x4>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	func_32k_ck: func_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26m_ck: virt_26m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	aplls_clkin_ck: aplls_clkin_ck@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0540>;
+	};
+
+	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&aplls_clkin_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	osc_ck: osc_ck@60 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	sys_ck: sys_ck@60 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	alt_ck: alt_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <54000000>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll_ck: dpll_ck@500 {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	apll96_ck: apll96_ck@500 {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	apll54_ck: apll54_ck@500 {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		ti,idlest-shift = <9>;
+		ti,clock-frequency = <54000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	func_54m_ck: func_54m_ck@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll54_ck>, <&alt_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0540>;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_96m_ck: func_96m_ck@540 {
+		#clock-cells = <0>;
+	};
+
+	apll96_d2_ck: apll96_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll96_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_48m_ck: func_48m_ck@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll96_d2_ck>, <&alt_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0540>;
+	};
+
+	func_12m_ck: func_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&func_48m_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	sys_clkout_src_gate: sys_clkout_src_gate@70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src_mux: sys_clkout_src_mux@70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src: sys_clkout_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
+	};
+
+	sys_clkout: sys_clkout@70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout_src>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	emul_ck: emul_ck@78 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0078>;
+	};
+
+	mpu_ck: mpu_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_gate_fck: dsp_gate_fck@800 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	dsp_div_fck: dsp_div_fck@840 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0840>;
+	};
+
+	dsp_fck: dsp_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
+	};
+
+	core_l3_ck: core_l3_ck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_gate_fck: gfx_3d_gate_fck@300 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0300>;
+	};
+
+	gfx_3d_div_fck: gfx_3d_div_fck@340 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_fck: gfx_3d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
+	};
+
+	gfx_2d_gate_fck: gfx_2d_gate_fck@300 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0300>;
+	};
+
+	gfx_2d_div_fck: gfx_2d_div_fck@340 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_2d_fck: gfx_2d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
+	};
+
+	gfx_ick: gfx_ick@310 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0310>;
+	};
+
+	l4_ck: l4_ck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	dss_ick: dss_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0210>;
+	};
+
+	dss1_gate_fck: dss1_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0200>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d5_ck: core_d5_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core_d8_ck: core_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	core_d9_ck: core_d9_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <9>;
+	};
+
+	core_d12_ck: core_d12_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	core_d16_ck: core_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dss1_mux_fck: dss1_mux_fck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0240>;
+	};
+
+	dss1_fck: dss1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
+	};
+
+	dss2_gate_fck: dss2_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0200>;
+	};
+
+	dss2_mux_fck: dss2_mux_fck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&func_48m_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0240>;
+	};
+
+	dss2_fck: dss2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
+	};
+
+	dss_54m_fck: dss_54m_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0200>;
+	};
+
+	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0204>;
+	};
+
+	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck@240 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0240>;
+	};
+
+	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0214>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick@240 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0240>;
+		ti,dividers = <0>, <1>, <2>, <0>, <4>;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0214>;
+	};
+
+	gpt1_ick: gpt1_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0410>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck@400 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0400>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck@440 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		reg = <0x0440>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	gpt2_ick: gpt2_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0210>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0200>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0244>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_ick: gpt3_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0210>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0200>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0244>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_ick: gpt4_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0210>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0200>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0244>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_ick: gpt5_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0210>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0200>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0244>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_ick: gpt6_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0210>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0200>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0244>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_ick: gpt7_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0210>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0200>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0244>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_ick: gpt8_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0210>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0200>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0244>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_ick: gpt9_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0210>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0200>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0244>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	gpt10_ick: gpt10_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0210>;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0200>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0244>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_ick: gpt11_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0210>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0200>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0244>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	gpt12_ick: gpt12_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0210>;
+	};
+
+	gpt12_gate_fck: gpt12_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0200>;
+	};
+
+	gpt12_mux_fck: gpt12_mux_fck@244 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0244>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0210>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <15>;
+		reg = <0x0200>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0210>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <16>;
+		reg = <0x0200>;
+	};
+
+	mcspi1_ick: mcspi1_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0210>;
+	};
+
+	mcspi1_fck: mcspi1_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0200>;
+	};
+
+	mcspi2_ick: mcspi2_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0210>;
+	};
+
+	mcspi2_fck: mcspi2_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0200>;
+	};
+
+	uart1_ick: uart1_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0210>;
+	};
+
+	uart1_fck: uart1_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0200>;
+	};
+
+	uart2_ick: uart2_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0210>;
+	};
+
+	uart2_fck: uart2_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0200>;
+	};
+
+	uart3_ick: uart3_ick@214 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	uart3_fck: uart3_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0204>;
+	};
+
+	gpios_ick: gpios_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0410>;
+	};
+
+	gpios_fck: gpios_fck@400 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0400>;
+	};
+
+	mpu_wdt_ick: mpu_wdt_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0410>;
+	};
+
+	mpu_wdt_fck: mpu_wdt_fck@400 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0400>;
+	};
+
+	sync_32k_ick: sync_32k_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0410>;
+	};
+
+	wdt1_ick: wdt1_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0410>;
+	};
+
+	omapctrl_ick: omapctrl_ick@410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0410>;
+	};
+
+	cam_fck: cam_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0200>;
+	};
+
+	cam_ick: cam_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0210>;
+	};
+
+	mailboxes_ick: mailboxes_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0210>;
+	};
+
+	wdt4_ick: wdt4_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0210>;
+	};
+
+	wdt4_fck: wdt4_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0200>;
+	};
+
+	mspro_ick: mspro_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0210>;
+	};
+
+	mspro_fck: mspro_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0200>;
+	};
+
+	fac_ick: fac_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0210>;
+	};
+
+	fac_fck: fac_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0200>;
+	};
+
+	hdq_ick: hdq_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0210>;
+	};
+
+	hdq_fck: hdq_fck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0200>;
+	};
+
+	i2c1_ick: i2c1_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0210>;
+	};
+
+	i2c2_ick: i2c2_ick@210 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0210>;
+	};
+
+	gpmc_fck: gpmc_fck@238 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <1>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdma_fck: sdma_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdma_ick: sdma_ick@238 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <0>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdrc_ick: sdrc_ick@238 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <2>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	des_ick: des_ick@21c {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x021c>;
+	};
+
+	sha_ick: sha_ick@21c {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x021c>;
+	};
+
+	rng_ick: rng_ick@21c {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	aes_ick: aes_ick@21c {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x021c>;
+	};
+
+	pka_ick: pka_ick@21c {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x021c>;
+	};
+
+	usb_fck: usb_fck@204 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0204>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000..990ff2d84
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
new file mode 100644
index 000000000..cb6968a8b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
new file mode 100644
index 000000000..252507cf3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+		ethernet = &ethernet;
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			wakeup-source;
+		};
+
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+		/* XXX pinctrl from twl */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@5401b000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+		>;
+	};
+
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,9514";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 000000000..0548b3913
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			wakeup-source;
+		};
+
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@540000000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&gpmc {
+	status = "okay";
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0 space, 16MB */
+
+	/* Chip select 0 */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpmc,device-width = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+		partition@1c0000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
new file mode 100644
index 000000000..f25c0a84a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	model = "CompuLab CM-T3517";
+	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+				&wl12xx_wkup_pins
+				&wl12xx_core_pins
+			    >;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
+		>;
+	};
+
+	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
+		>;
+	};
+
+	otg_drv_vbus: pinmux_otg_drv_vbus {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_core_pins: pinmux_wl12xx_core_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	usb_hub_pins: pinmux_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
+		>;
+	};
+};
+
+&hsusb1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy1_reset_pins>;
+	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy2_reset_pins>;
+	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&am35x_otg_hs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vqmmc-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t35x
+	>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
new file mode 100644
index 000000000..bc545ee23
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3530";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+
+	/* Regulator to trigger the reset signal of the Wifi module */
+	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_reset>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t35x
+	>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
new file mode 100644
index 000000000..48e48b0c8
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T3730
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3730";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vaux2>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vqmmc-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t3730
+	>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
new file mode 100644
index 000000000..51baedf16
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_pins>;
+		ledb {
+			label = "cm-t3x:green";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb1_power>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	tv0: svideo-connector {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	green_led_pins: pinmux_green_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
+		>;
+	};
+
+	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy &hsusb2_phy>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;			/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 0>;		/* gpio_57 */
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&venc {
+	status = "okay";
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <120>;
+		gpmc,cs-wr-off-ns = <120>;
+
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <120>;
+		gpmc,adv-wr-off-ns = <120>;
+
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <90>;
+
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <90>;
+
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,access-ns = <72>;
+		gpmc,cycle2cycle-delay-ns = <60>;
+
+		gpmc,rd-cycle-ns = <120>;
+		gpmc,wr-cycle-ns = <120>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xloader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "uboot";
+			reg = <0x80000 0x1e0000>;
+		};
+		partition@260000 {
+			label = "uboot environment";
+			reg = <0x260000 0x40000>;
+		};
+		partition@2a0000 {
+			label = "linux";
+			reg = <0x2a0000 0x400000>;
+		};
+		partition@6a0000 {
+			label = "rootfs";
+			reg = <0x6a0000 0x1f880000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
new file mode 100644
index 000000000..5e8943539
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab CM-T3x30 CoMs
+ */
+
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "cm-t35";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+};
+
+&omap3_pmx_core {
+
+	smsc1_pins: pinmux_smsc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
+		>;
+	};
+
+ 	hsusb0_pins: pinmux_hsusb0_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+
+	smsc1: ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc1_pins>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		reg = <5 0 0xff>;
+	};
+};
+
+&i2c1 {
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
+
+&venc {
+	vdda-supply = <&vdac>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(0) */
+	ti,pullups = <0x000001>;
+};
+
+&twl_keypad {
+	linux,keymap = <
+				MATRIX_KEY(0x00, 0x01, KEY_A)
+				MATRIX_KEY(0x00, 0x02, KEY_B)
+				MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+				MATRIX_KEY(0x01, 0x01, KEY_UP)
+				MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+				MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+				MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+				MATRIX_KEY(0x02, 0x02, KEY_C)
+				MATRIX_KEY(0x02, 0x03, KEY_D)
+			>;
+};
+
+&hsusb1_phy {
+	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb0_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
new file mode 100644
index 000000000..51e6c2d42
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Device Tree Source for OMAP3 SoC CPU thermal
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+	coefficients = <0 20000>;
+
+	thermal-sensors = <&bandgap>;
+
+	cpu_trips: trips {
+		cpu_alert0: cpu_alert {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cpu_cooling_maps: cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
new file mode 100644
index 000000000..6883ccb45
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "omap34xx.dtsi"
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "devkit8000::led1";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "devkit8000::led2";
+			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
+			default-state = "on";
+			linux,default-trigger = "none";
+		};
+
+		usr {
+			label = "devkit8000::led3";
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
+			default-state = "on";
+			linux,default-trigger = "usr";
+		};
+
+		pmu_stat {
+			label = "devkit8000::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "devkit8000";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,audio-routing =
+			"Ext Spk", "PREDRIVEL",
+			"Ext Spk", "PREDRIVER",
+			"MAINMIC", "Main Mic",
+			"Main Mic", "Mic Bias 1";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,code = <BTN_EXTRA>;
+			wakeup-source;
+		};
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_dvi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c2>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/*
+	 * pulldowns:
+	 * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c6>;
+};
+
+&twl_keypad {
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+			MATRIX_KEY(1, 0, KEY_2)
+			MATRIX_KEY(2, 0, KEY_3)
+			MATRIX_KEY(0, 1, KEY_4)
+			MATRIX_KEY(1, 1, KEY_5)
+			MATRIX_KEY(2, 1, KEY_6)
+			MATRIX_KEY(3, 1, KEY_F5)
+			MATRIX_KEY(0, 2, KEY_7)
+			MATRIX_KEY(1, 2, KEY_8)
+			MATRIX_KEY(2, 2, KEY_9)
+			MATRIX_KEY(3, 2, KEY_F6)
+			MATRIX_KEY(0, 3, KEY_F7)
+			MATRIX_KEY(1, 3, KEY_0)
+			MATRIX_KEY(2, 3, KEY_F8)
+			MATRIX_KEY(4, 5, KEY_RESERVED)
+			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)
+			>;
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  6 0 0x2c000000 0x1000000>;	/* CS6: 16MB for DM9000 */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+
+	ethernet@6,0 {
+		compatible = "davicom,dm9000";
+		reg =  <6 0x000 2
+			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		bank-width = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+		davicom,no-eeprom;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <0>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&vpll1 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vpll1>;
+	vdda_dac-supply = <&vdac>;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dpi_dvi_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+
+		endpoint@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
new file mode 100644
index 000000000..a7f99ae0c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+	aliases {
+		display0 = &lcd0;
+		display1 = &dvi0;
+		display2 = &tv0;
+	};
+
+	lcd0: display {
+		compatible = "panel-dpi";
+		label = "lcd";
+
+		enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dpi_lcd_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vio {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcspi2 {
+
+	/* touch controller */
+	ads7846@0 {
+		compatible = "ti,ads7846";
+		vcc-supply = <&vio>;
+
+		reg = <0>;			/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 0>;		/* gpio_27 */
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,debounce-max = /bits/ 16 <10>;
+		ti,debounce-tol = /bits/ 16 <5>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,keep-vref-on = <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
new file mode 100644
index 000000000..afed85078
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+/dts-v1/;
+
+/*
+ * 4.3'' LCD panel sold with devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+	lcd0: display {
+		panel-timing {
+			clock-frequency = <10164705>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <2>;
+			hback-porch = <2>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
new file mode 100644
index 000000000..07c51a105
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com>
+ */
+/dts-v1/;
+
+/*
+ * 7.0'' LCD panel sold with some devkit8000 board
+ */
+
+#include "omap3-devkit8000-lcd-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+	lcd0: display {
+		panel-timing {
+			clock-frequency = <40000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <1>;
+			hback-porch = <1>;
+			hsync-len = <48>;
+			vback-porch = <25>;
+			vfront-porch = <12>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
new file mode 100644
index 000000000..162d0726b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap3-devkit8000-common.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000";
+	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
+
+	aliases {
+		display1 = &dvi0;
+		display2 = &tv0;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
new file mode 100644
index 000000000..93ffeddad
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Amazon Echo (first generation)";
+	compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0xc600000>; /* 198 MB */
+	};
+
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <40>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+
+		mute-button {
+			label = "mute";
+			linux,code = <KEY_MUTE>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;	/* GPIO_70 */
+			wakeup-source;
+		};
+
+		help-button {
+			label = "help";
+			linux,code = <KEY_HELP>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;	/* GPIO_72 */
+			wakeup-source;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio3  5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+			&gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	lp5523A: lp5523A@32 {
+		compatible = "national,lp5523";
+		label = "q1";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523B: lp5523B@33 {
+		compatible = "national,lp5523";
+		label = "q3";
+		reg = <0x33>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523C: lp5523C@34 {
+		compatible = "national,lp5523";
+		label = "q4";
+		reg = <0x34>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523D: lp552D@35 {
+		compatible = "national,lp5523";
+		label = "q2";
+		reg = <0x35>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+		>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	non-removable;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+	ti,system-power-controller;
+
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+
+		vio_reg: regulator@1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_dsp";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
new file mode 100644
index 000000000..c9332195d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
new file mode 100644
index 000000000..17c89df6c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include <dt-bindings/input/input.h>
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		/* gpio_149 with uart1_rts pad as wakeirq */
+		interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>,
+				      <&omap3_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&twl_keypad {
+	linux,keymap = <
+			MATRIX_KEY(2, 2, KEY_1)
+			MATRIX_KEY(1, 1, KEY_2)
+			MATRIX_KEY(0, 0, KEY_3)
+			MATRIX_KEY(3, 2, KEY_4)
+			MATRIX_KEY(2, 1, KEY_5)
+			MATRIX_KEY(1, 0, KEY_6)
+			MATRIX_KEY(1, 3, KEY_7)
+			MATRIX_KEY(3, 1, KEY_8)
+			MATRIX_KEY(2, 0, KEY_9)
+			MATRIX_KEY(2, 3, KEY_KPASTERISK)
+			MATRIX_KEY(0, 2, KEY_0)
+			MATRIX_KEY(3, 0, KEY_KPDOT)
+			/* s4 not wired */
+			MATRIX_KEY(1, 2, KEY_BACKSPACE)
+			MATRIX_KEY(0, 1, KEY_ENTER)
+			>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
new file mode 100644
index 000000000..b4109f48e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Common support for omap3 EVM 35xx/37xx processor modules
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&dss {
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&lcd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehci_phy_pins>;
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)	/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* Devices are routed with gpmc_nbe1.gpio_61 to on-board devices */
+	on_board_gpio_61: pinmux_ehci_port_select_pins {
+		pinctrl-single,pins = <
+		OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+
+		/* mcspi1_cs3.hsusb2_data2 */
+		OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_clk.hsusb2_data7 */
+		OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_simo.hsusb2_data4 */
+		OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_somi.hsusb2_data5 */
+		OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs0.hsusb2_data6 */
+		OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* mcspi2_cs1.hsusb2_data3 */
+		OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	/*
+	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
+	 * reset on return from off mode in idle.
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+/*
+ * GPIO_61 (nUSB2_EN_1V8) must be low to enable on-board EHCI USB2 interface
+ * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
+ */
+&gpio2 {
+	en_usb2_port {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
+		output-low;
+		line-name = "enable usb2 port";
+	};
+};
+
+/* T2_GPIO_2 low to route GPIO_61 to on-board devices */
+&twl_gpio {
+	en_on_board_gpio_61 {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "en_hsusb2_clk";
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for LAN9220 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
new file mode 100644
index 000000000..5cc0cf7cd
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
+#include "omap3-evm-processor-common.dtsi"
+
+/ {
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
+	compatible = "ti,omap3-evm", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+
+	ehci_phy_pins: pinmux_ehci_phy_pins {
+		pinctrl-single,pins = <
+
+		/* EHCI PHY reset GPIO etk_d7.gpio_21 */
+		OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)
+
+		/* EHCI VBUS etk_d8.gpio_22 */
+		OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)
+		>;
+	};
+
+	/* Used by OHCI and EHCI. OHCI won't work without external phy */
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+
+		/* etk_d10.hsusb2_clk */
+		OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d11.hsusb2_stp */
+		OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)
+
+		/* etk_d12.hsusb2_dir */
+		OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d13.hsusb2_nxt */
+		OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d14.hsusb2_data0 */
+		OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)
+
+		/* etk_d15.hsusb2_data1 */
+		OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+&gpmc {
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29f2g16abdhc";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
new file mode 100644
index 000000000..68e56b506
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "OMAP3 GTA04";
+	compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd;
+		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
+	ldo_3v3: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aux-button {
+			label = "aux";
+			linux,code = <KEY_PHONE>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
+	antenna-detect {
+		compatible = "gpio-keys";
+
+		gps_antenna_button: gps-antenna-button {
+			label = "GPS_EXT_ANT";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEIN_INSERT>;
+			gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+			interrupt-parent = <&gpio5>;
+			interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "gta04";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	/* GSM audio */
+	sound_telephony {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "GTA04 voice";
+		simple-audio-card,bitclock-master = <&telephony_link_master>;
+		simple-audio-card,frame-master = <&telephony_link_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-inversion;
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp4>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&gtm601_codec>;
+		};
+	};
+
+	gtm601_codec: gsm_codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	spi_lcd: spi_lcd {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_pins>;
+
+		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		/* lcd panel */
+		lcd: td028ttec1@0 {
+			compatible = "tpo,td028ttec1";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+
+			backlight= <&backlight>;
+			label = "lcd";
+			port {
+				lcd_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm11 0 12000000 0>;
+		pwm-names = "backlight";
+		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <9>;	/* => 90 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+	};
+
+	pwm11: pwm-11 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+		ti,clock-source = <0x01>;
+	};
+
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+
+	tv0: connector {
+		compatible = "composite-video-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&opa_out>;
+			};
+		};
+	};
+
+	tv_amp: opa362 {
+		compatible = "ti,opa362";
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				opa_in: endpoint {
+					remote-endpoint = <&venc_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				opa_out: endpoint {
+					remote-endpoint = <&tv_connector_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
+	};
+
+	/* devconf0 setup for mcbsp1 clock pins */
+	pinmux_mcbsp1@48002274 {
+		compatible = "pinctrl-single";
+		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcbsp1_devconf0_pins>;
+		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+			/*                   offset bits mask */
+			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
+		};
+	};
+
+	/* devconf1 setup for tvout pins */
+	pinmux_tv_out@480022d8 {
+		compatible = "pinctrl-single";
+		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x81>;	/* TV out pin control */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tv_acbias_devconf1_pins>;
+		tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+			/*			offset	bits	mask */
+			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	backlight_pins: backlight_pins_pinmux {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+
+	gps_pins: pinmux_gps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */
+		>;
+	};
+
+	hdq_pins: hdq_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
+		>;
+	};
+
+	bmp085_pins: pinmux_bmp085_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+		>;
+	};
+
+	bma180_pins: pinmux_bma180_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+		>;
+	};
+
+	itg3200_pins: pinmux_itg3200_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
+		>;
+	};
+
+	hmc5843_pins: pinmux_hmc5843_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
+		>;
+	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
+
+	camera_pins: pinmux_camera_pins {
+		pinctrl-single,pins = <
+			/* set up parallel camera interface */
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+			OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			/* mcbsp_clks is used as PENIRQ */
+			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	   mcbsp_clks.mcbsp_clks */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dx */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_clkx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_fsx */
+		>;
+	};
+
+	mcbsp4_pins: pinmux_mcbsp4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_dx.mcbsp4_fsx */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	spi_gpio_pins: spi_gpio_pinmux {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			ti,enable-vibra = <1>;
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* pressure sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bmp085_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
+	};
+
+	/* accelerometer */
+	bma180@41 {
+		compatible = "bosch,bma180";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bma180_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
+	};
+
+	/* gyroscope */
+	itg3200@68 {
+		compatible = "invensense,itg3200";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&itg3200_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
+	};
+
+	/* leds + gpios */
+	tca6507: tca6507@45 {
+		compatible = "ti,tca6507";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x45>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gta04_led0: red_aux@0 {
+			label = "gta04:red:aux";
+			reg = <0x0>;
+		};
+
+		gta04_led1: green_aux@1 {
+			label = "gta04:green:aux";
+			reg = <0x1>;
+		};
+
+		gta04_led3: red_power@3 {
+			label = "gta04:red:power";
+			reg = <0x3>;
+			linux,default-trigger = "default-on";
+		};
+
+		gta04_led4: green_power@4 {
+			label = "gta04:green:power";
+			reg = <0x4>;
+		};
+
+		wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
+			reg = <0x6>;
+			compatible = "gpio";
+		};
+	};
+
+	/* compass aka magnetometer */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5883l";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hmc5843_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;	/* gpio112 */
+	};
+
+	/* touchscreen */
+	tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
+		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
+	};
+
+	/* RFID EEPROM */
+	m24lr64@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	ti,non-removable;
+	broken-cd;	/* hardware has no CD */
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux4>;
+	bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+	mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#define BIT(x) (1 << (x))
+&twl_gpio {
+	/* pullups: BIT(2) */
+	ti,pullups = <BIT(2)>;
+	/*
+	 * pulldowns:
+	 * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+			 BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
+&twl_keypad {
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	gnss: gnss {
+		compatible = "wi2wi,w2sg0004";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gps_pins>;
+		sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		lna-supply = <&vsim>;
+		vcc-supply = <&ldo_3v3>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+/* spare */
+&vaux1 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+/* sensors */
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;	/* we should never switch off while vio is on! */
+};
+
+/* camera */
+&vaux3 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+};
+
+/* WLAN/BT */
+&vaux4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* GPS LNA */
+&vsim {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&opa_in>;
+			ti,channels = <1>;
+			ti,invert-polarity;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpmc,device-width = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,we-off-ns = <40>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,sync-clk-ps = <0>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+
+		bootloaders_env@240000 {
+			label = "U-Boot Env";
+			reg = <0x240000 0x40000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x600000>;
+		};
+
+		filesystem@880000 {
+			label = "File System";
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&mcbsp1 { /* FM Transceiver PCM */
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp4_pins>;
+};
+
+&hdqw1w {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+/* image signal processor within OMAP3 SoC */
+&isp {
+	ports {
+		port@0 {
+			reg = <0>;
+			parallel_ep: endpoint {
+				ti,isp-clock-divisor = <1>;
+				ti,strobe-mode;
+				bus-width = <8>;/* Used data lines */
+				data-shift = <2>; /* Lines 9:2 are used */
+				hsync-active = <0>; /* Active low */
+				vsync-active = <1>; /* Active high */
+				data-active = <1>;/* Active high */
+				pclk-sample = <1>;/* Falling */
+			};
+		};
+		/* port@1 and port@2 are not used by GTA04 */
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts
new file mode 100644
index 000000000..bfae1a9ce
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a3.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A3/Letux 2804";
+};
+
+&i2c2 {
+
+	/* alternate accelerometer that might be installed on some GTA04A3 boards */
+	lis302@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		Vdd-supply = <&vaux2>;
+		Vdd_IO-supply = <&vaux2>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <8>;
+		st,click-thresh-y = <8>;
+		st,click-thresh-z = <10>;
+		st,click-click-time-limit = <9>;
+		st,click-latency = <50>;
+		st,irq1-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <32>;
+		st,min-limit-y = <3>;
+		st,min-limit-z = <3>;
+		st,max-limit-x = <3>;
+		st,max-limit-y = <32>;
+		st,max-limit-z = <32>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts
new file mode 100644
index 000000000..f1cf24d55
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a4.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Marek Belisko <marek@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A4/Letux 2804";
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
new file mode 100644
index 000000000..fd84bbf3b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A5/Letux 2804";
+
+	sound {
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
+	};
+
+	wlan_en: wlan_en_regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
+
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pps_pins>;
+
+		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+	};
+
+};
+
+&gpio5 {
+	irda_en {
+		gpio-hog;
+		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+		output-high;	/* activate gpio_175 to disable IrDA receiver */
+	};
+};
+
+&omap3_pmx_core {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
+		>;
+	};
+
+	wlan_irq_pin: pinmux_wlan_irq_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
+		>;
+	};
+
+	irda_pins: pinmux_irda {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
+		>;
+	};
+
+	pps_pins: pinmux_pps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+		>;
+	};
+
+};
+
+/*
+ * for WL183x module see
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+	/delete-property/ reset-gpios;
+};
+
+&mmc2 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	cap-power-off-card;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wlan_irq_pin>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/delete-property/ mmc-pwrseq;
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&i2c2 {
+	/delete-node/ bmp085@77;
+	/delete-node/ bma180@41;
+	/delete-node/ itg3200@68;
+	/delete-node/ hmc5843@1e;
+
+	bmg160@69 {
+		compatible = "bosch,bmg160";
+		reg = <0x69>;
+	};
+
+	bmc150@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+	};
+
+	bmc150@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+	};
+
+	bme280@76 {
+		compatible = "bosch,bme280";
+		reg = <0x76>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a5one.dts b/arch/arm/boot/dts/omap3-gta04a5one.dts
new file mode 100644
index 000000000..95df45cc7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5one.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04a5.dts"
+
+/ {
+	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+};
+
+&omap3_pmx_core {
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+};
+
+&gpmc {
+	/* switch inherited setup to OneNAND */
+
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/delete-node/ nand@0,0;
+
+	onenand@0,0 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+
+		bootloaders_env@240000 {
+			label = "U-Boot Env";
+			reg = <0x240000 0x40000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x600000>;
+		};
+
+		filesystem@880000 {
+			label = "File System";
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi
new file mode 100644
index 000000000..a010585d0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha-common.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+	gpio_poweroff {
+		pinctrl-names = "default";
+		pinctrl-0 = <&poweroff_pins>;
+
+		compatible = "gpio-poweroff";
+		gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;	/* GPIO 168 */
+	};
+};
+
+&omap3_pmx_core {
+	sound2_pins: pinmux_sound2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d8 gpio_44 */
+		>;
+	};
+
+	led_blue_pins: pinmux_led_blue_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)	/* cam_xclka gpio_96, LED blue */
+		>;
+	};
+
+	led_green_pins: pinmux_led_green_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)	/* cam_d8 gpio_107, LED green */
+		>;
+	};
+
+	led_red_pins: pinmux_led_red_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* cam_xclkb gpio_111, LED red */
+		>;
+	};
+
+	poweroff_pins: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* i2c2_scl gpio_168 */
+		>;
+	};
+
+	powerdown_input_pins: pinmux_powerdown_input_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4)	/* i2c2_sda gpio_183 */
+		>;
+	};
+
+	fpga_boot0_pins: fpga_boot0_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2 gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)	/* cam_d3 gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4)	/* cam_d4 gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d5 gpio_104 */
+		>;
+	};
+
+	fpga_boot1_pins: fpga_boot1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)	/* gpmc_d10 gpio_46 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d11 gpio_47 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d12 gpio_48 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_d13 gpio_49 */
+		>;
+	};
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
new file mode 100644
index 000000000..643283f0c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+	model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
+	compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb2_pins
+		&powerdown_input_pins
+		&fpga_boot0_pins
+		&fpga_boot1_pins
+		&led_blue_pins
+		&led_green_pins
+		&led_red_pins
+		&touchscreen_wake_pins
+	>;
+
+	touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpio_136, Touchscreen IRQ */
+		>;
+	};
+
+	touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* gpio_110, Touchscreen Wake */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display {
+		compatible = "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <31250000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <86>;
+			hsync-len = <1>;
+			vback-porch = <30>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
+
+		default-on;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts
new file mode 100644
index 000000000..19e471eb3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+	model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
+	compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb2_pins
+		&powerdown_input_pins
+		&fpga_boot0_pins
+		&fpga_boot1_pins
+		&led_blue_pins
+		&led_green_pins
+		&led_red_pins
+	>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
new file mode 100644
index 000000000..5de2be9bb
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common device tree for IGEP boards based on AM/DM37x
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "igep2";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+};
+
+&omap3_pmx_core {
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+			/* OneNAND seems to require PIN_INPUT on clock. */
+                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29c4g96maz";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "okay";
+	};
+
+	onenand@0,0 {
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-wrap;
+		gpmc,burst-read;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <96>;
+		gpmc,cs-wr-off-ns = <96>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <18>;
+		gpmc,oe-off-ns = <96>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <96>;
+		gpmc,rd-cycle-ns = <114>;
+		gpmc,wr-cycle-ns = <114>;
+		gpmc,access-ns = <90>;
+		gpmc,page-burst-access-ns = <12>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <6>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <90>;
+		gpmc,sync-clk-ps = <12000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		status = "disabled";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
new file mode 100644
index 000000000..af8aa5f0f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		compatible = "gpio-leds";
+
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user2 {
+			label = "omap3:green:user1";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
+		#phy-cells = <0>;
+	};
+
+	tfp410: encoder {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&tfp410_pins
+		&dss_dpi_pins
+	>;
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+		>;
+	};
+
+	smsc9221_pins: pinmux_smsc9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+		>;
+	};
+
+	mmc1_wp_pins: pinmux_mmc1_cd_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc9221_pins>;
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+};
+
+&dss {
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;	/* gpio_29 */
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
new file mode 100644
index 000000000..567232584
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WL_EN signal of the Wifi module */
+	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbep5clwmc-wlen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs3.gpio_177 - W_IRQ */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+	vmmc-supply = <&lbep5clwmc_wlen>;
+	bus-width = <4>;
+	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
+	};
+};
+
+&uart2 {
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+		max-speed = <300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
new file mode 100644
index 000000000..e341535a7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
+	};
+};
+
+&omap3_pmx_core {
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
+		>;
+	};
+};
+
+/* On board Wifi module */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
new file mode 100644
index 000000000..71b0ae807
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common Device Tree Source for IGEP COM MODULE
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep.dtsi"
+
+/ {
+	leds: gpio_leds {
+		compatible = "gpio-leds";
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:green:user1";
+			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;	/* LEDB */
+			 default-state = "off";
+		};
+
+		user2 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;		/* gpio_16 */
+			 default-state = "off";
+		};
+	};
+
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
+		#phy-cells = <0>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_core2_pins>;
+
+	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	leds_core2_pins: pinmux_leds_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
new file mode 100644
index 000000000..df6ba1219
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WL_EN signal of the Wifi module */
+	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbep5clwmc-wlen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
+		>;
+	};
+
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+	boot {
+		label = "omap3:green:boot";
+		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+	vmmc-supply = <&lbep5clwmc_wlen>;
+	bus-width = <4>;
+	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
+	};
+};
+
+&uart2 {
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+		max-speed = <300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
new file mode 100644
index 000000000..32f31035d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
+	};
+};
+
+&omap3_pmx_core {
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&leds_core2_pins>;
+
+	boot {
+		label = "omap3:green:boot";
+		gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;	/* LEDSYNC */
+		default-state = "on";
+	};
+};
+
+/* On board Wifi module */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+};
+
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
new file mode 100644
index 000000000..b898e2f6f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+	compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		key_enter {
+			label = "enter";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+
+		key_f1 {
+			label = "f1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+			linux,code = <KEY_F1>;
+			wakeup-source;
+		};
+
+		key_f2 {
+			label = "f2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+			linux,code = <KEY_F2>;
+			wakeup-source;
+		};
+
+		key_f3 {
+			label = "f3";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+			linux,code = <KEY_F3>;
+			wakeup-source;
+		};
+
+		key_f4 {
+			label = "f4";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+			linux,code = <KEY_F4>;
+			wakeup-source;
+		};
+
+		key_left {
+			label = "left";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+			linux,code = <KEY_LEFT>;
+			wakeup-source;
+		};
+
+		key_right {
+			label = "right";
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+			linux,code = <KEY_RIGHT>;
+			wakeup-source;
+		};
+
+		key_up {
+			label = "up";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+			linux,code = <KEY_UP>;
+			wakeup-source;
+		};
+
+		key_down {
+			label = "down";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
+		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,nand";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x1c0000 0x40000>;
+		};
+		partition@200000 {
+			label = "Kernel";
+			reg = <0x200000 0x1e00000>;
+		};
+		partition@2000000 {
+			label = "Filesystem";
+			reg = <0x2000000 0x6000000>;
+		};
+	};
+
+	ethernet@gpmc {
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		reg = <1 0 0xff>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-idle";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+/* tps61130rsa enabled by twl4030 regen */
+&lcd_3v3 {
+	regulator-always-on;
+};
+
+&lcd0 {
+	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
+	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 0>;		/* gpio54 */
+		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	compatible = "ti,omap3-pre-es3-hsmmc";
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	status="disabled";
+};
+
+&mmc3 {
+	status="disabled";
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+		>;
+	};
+
+	musb_pins: pinmux_musb_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+			MATRIX_KEY(0, 1, KEY_2)
+			MATRIX_KEY(0, 2, KEY_3)
+			MATRIX_KEY(1, 0, KEY_4)
+			MATRIX_KEY(1, 1, KEY_5)
+			MATRIX_KEY(1, 2, KEY_6)
+			MATRIX_KEY(1, 3, KEY_F5)
+			MATRIX_KEY(2, 0, KEY_7)
+			MATRIX_KEY(2, 1, KEY_8)
+			MATRIX_KEY(2, 2, KEY_9)
+			MATRIX_KEY(2, 3, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F7)
+			MATRIX_KEY(3, 1, KEY_0)
+			MATRIX_KEY(3, 2, KEY_F8)
+			MATRIX_KEY(5, 4, KEY_RESERVED)
+			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux1 {
+	/* Needed for ads7846 */
+	regulator-name = "vcc";
+};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
new file mode 100644
index 000000000..06e7cf96c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-A83X module (DM3730)";
+	compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	chosen {
+			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;   /* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "lilly-a83x::led1";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "lilly-a83x";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	reg_vcc3: vcc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_vcc3>;
+		#phy-cells = <0>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
+		>;
+	};
+
+	tsc2048_pins: pinmux_tsc2048_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1cd_pins: pinmux_mmc1cd_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+
+			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
+			 * reset can't be controlled. So we clamp this GPIO to
+			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+			 */
+
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+
+	hsusb1_2_pins: pinmux_hsusb1_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
+		>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	vmmc1: regulator-vmmc1 {
+		regulator-always-on;
+	};
+
+	vdd1: regulator-vdd1 {
+		regulator-always-on;
+	};
+
+	vdd2: regulator-vdd2 {
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+		gpiom1: gpio@20 {
+			compatible = "microchip,mcp23017";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x20>;
+		};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+	cd-inverted;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+
+	tsc2046@0 {
+		reg = <0>;   /* CS0 */
+		compatible = "ti,tsc2046";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0>;   /* boot6 / gpio_8 */
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2048_pins>;
+
+		ti,x-min = /bits/ 16 <300>;
+		ti,x-max = /bits/ 16 <3000>;
+		ti,y-min = /bits/ 16 <600>;
+		ti,y-max = /bits/ 16 <3600>;
+		ti,x-plate-ohms = /bits/ 16 <80>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+
+		wakeup-source;
+	};
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_2_pins>;
+	num-ports = <2>;
+	port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,
+		<7 0 0x15000000 0x01000000>;
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		/* no elm on omap3 */
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,burst-length= <4>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <100>;
+		gpmc,cs-wr-off-ns = <100>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <100>;
+		gpmc,adv-wr-off-ns = <100>;
+		gpmc,oe-on-ns = <5>;
+		gpmc,oe-off-ns = <75>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <75>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,wr-data-mux-bus-ns = <75>;
+		gpmc,wr-access-ns = <155>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0 0x80000>;
+		};
+
+		partition@80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		partition@260000 {
+			label = "u-boot-environment";
+			reg = <0x260000 0x20000>;
+		};
+
+		partition@280000 {
+			label = "kernel";
+			reg = <0x280000 0x500000>;
+		};
+
+		partition@780000 {
+			label = "filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+
+	ethernet@7,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <60>;
+		gpmc,cs-wr-off-ns = <60>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <60>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 0x2>;
+		reg = <7 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		phy-mode = "mii";
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
new file mode 100644
index 000000000..ecb4ef738
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-DBB056 (DM3730)";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&twl {
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	lan9117_pins: pinmux_lan9117_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+		>;
+	};
+
+	gpio5_pins: pinmux_gpio5_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc1>;
+	cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;   /* gpio_163 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	ti,dual-volt;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
+		<4 0 0x20000000 0x01000000>,
+		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <65>;
+		gpmc,cs-wr-off-ns = <65>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <65>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <65>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 0x2>;
+		reg = <4 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9117_pins>;
+		phy-mode = "mii";
+		smsc,force-internal-phy;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
new file mode 100644
index 000000000..d211bcc31
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&i2c2 {
+	smia_1: camera@10 {
+		compatible = "nokia,smia";
+		reg = <0x10>;
+		/* No reset gpio */
+		vana-supply = <&vaux3>;
+		clocks = <&isp 0>;
+		clock-frequency = <9600000>;
+		flash-leds = <&as3645a_flash &as3645a_indicator>;
+		port {
+			smia_1_1: endpoint {
+				link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2a_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	ak8975@f {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0f>;
+	};
+};
+
+&isp {
+	vdd-csiphy1-supply = <&vaux2>;
+	vdd-csiphy2-supply = <&vaux2>;
+	ports {
+		port@2 {
+			reg = <2>;
+			csi2a_ep: endpoint {
+				remote-endpoint = <&smia_1_1>;
+				clock-lanes = <2>;
+				data-lanes = <1 3>;
+				crc = <1>;
+				lane-polarities = <1 1 1>;
+			};
+		};
+	};
+};
+
+&modem {
+	compatible = "nokia,n9-modem";
+};
+
+&lis302 {
+	st,axis-x = <1>;    /* LIS3_DEV_X */
+	st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-46)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <46>;
+	st,max-limit-z = <46>;
+};
+
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(6, 8, KEY_VOLUMEUP)
+			 MATRIX_KEY(7, 8, KEY_VOLUMEDOWN)
+			 >;
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
new file mode 100644
index 000000000..7dafd69b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/*
+ * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
+ * for omap AES HW crypto support. When linux kernel try to access memory of AES
+ * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
+ * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
+ * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
+ * There is "unofficial" version of bootloader which enables AES in L3 firewall
+ * but it is not widely used and to prevent kernel crash rather AES is disabled.
+ * There is also no runtime detection code if AES is disabled in L3 firewall...
+ */
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
+	status = "disabled";
+};
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+
+	aliases {
+		i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		display0 = &lcd;
+		display1 = &tv;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "debug::sleep";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&debug_leds>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		camera_lens_cover {
+			label = "Camera Lens Cover";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_CAMERA_LENS_COVER>;
+			linux,can-disable;
+		};
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+			linux,code = <KEY_CAMERA_FOCUS>;
+			linux,can-disable;
+		};
+
+		camera_capture {
+			label = "Camera Capture";
+			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+			linux,code = <KEY_CAMERA>;
+			linux,can-disable;
+		};
+
+		lock_button {
+			label = "Lock Button";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+			linux,code = <KEY_SCREENLOCK>;
+			linux,can-disable;
+		};
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			linux,can-disable;
+		};
+
+		proximity_sensor {
+			label = "Proximity Sensor";
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_FRONT_PROXIMITY>;
+			linux,can-disable;
+		};
+
+		machine_cover {
+			label = "Machine Cover";
+			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
+	};
+
+	isp1707: isp1707 {
+		compatible = "nxp,isp1707";
+		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		usb-phy = <&usb2_phy>;
+	};
+
+	tv: connector {
+		compatible = "composite-video-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	sound: n900-audio {
+		compatible = "nokia,n900-audio";
+
+		nokia,cpu-dai = <&mcbsp2>;
+		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+		nokia,headphone-amplifier = <&tpa6130a2>;
+
+		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	battery: n900-battery {
+		compatible = "nokia,n900-battery";
+		io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
+		io-channel-names = "temp", "bsi", "vbat";
+	};
+
+	pwm9: pwm-9 {
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x00>; /* timer_sys_ck */
+	};
+
+	ir: n900-ir {
+		compatible = "nokia,n900-ir";
+		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+	};
+
+	rom_rng: rng {
+		compatible = "nokia,n900-rom-rng";
+		clocks = <&rng_ick>;
+		clock-names = "ick";
+	};
+
+	/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
+	vctcxo: vctcxo {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&isp {
+	vdds_csib-supply = <&vaux2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_pins>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			csi_isp: endpoint {
+				remote-endpoint = <&csi_cam1>;
+				bus-type = <3>; /* CCP2 */
+				clock-lanes = <1>;
+				data-lanes = <0>;
+				lane-polarity = <0 0>;
+				/* Select strobe = <1> for back camera, <0> for front camera */
+				strobe = <1>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+		>;
+	};
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)		/* dss_data16.gpio_86 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
+		>;
+	};
+
+	debug_leds: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
+	acx565akm_pins: pinmux_acx565akm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+		>;
+	};
+
+	dss_sdi_pins: pinmux_dss_sdi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+		>;
+	};
+
+	wl1251_pins: pinmux_wl1251 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)		/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+		>;
+	};
+
+	modem_pins: pinmux_modem {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)		/* gpio 72 => ape_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+		>;
+	};
+
+	camera_pins: pinmux_camera {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7)       /* cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7)       /* cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0)       /* cam_xclka */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7)       /* cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)        /* cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)        /* cam_d7 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0)        /* cam_d8 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0)        /* cam_d9 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7)       /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7)       /* cam_xclkb */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0)       /* cam_strobe */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2200000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+	regulator-name = "V28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+	regulator-always-on; /* due to battery cover sensor */
+};
+
+&vaux2 {
+	regulator-name = "VCSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux3 {
+	regulator-name = "VMMC2_30";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux4 {
+	regulator-name = "VCAM_ANA_28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc1 {
+	regulator-name = "VMMC1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc2 {
+	regulator-name = "V28_A";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+	regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+	regulator-name = "VPLL";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+	regulator-always-on;
+};
+
+&vpll2 {
+	regulator-name = "VSDI_CSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+	regulator-always-on;
+};
+
+&vsim {
+	regulator-name = "VMMC2_IO_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vio {
+	regulator-name = "VIO";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vintana1 {
+	regulator-name = "VINTANA1";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&vintana2 {
+	regulator-name = "VINTANA2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+	regulator-always-on;
+};
+
+&vintdig {
+	regulator-name = "VINTDIG";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+	dma-channel-mask = <0xfffffffc>;
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+
+	twl_power: power {
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		ti,use_poweroff;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
+			 MATRIX_KEY(0x00, 0x01, KEY_O)
+			 MATRIX_KEY(0x00, 0x02, KEY_P)
+			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
+			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
+			 MATRIX_KEY(0x00, 0x06, KEY_A)
+			 MATRIX_KEY(0x00, 0x07, KEY_S)
+
+			 MATRIX_KEY(0x01, 0x00, KEY_W)
+			 MATRIX_KEY(0x01, 0x01, KEY_D)
+			 MATRIX_KEY(0x01, 0x02, KEY_F)
+			 MATRIX_KEY(0x01, 0x03, KEY_G)
+			 MATRIX_KEY(0x01, 0x04, KEY_H)
+			 MATRIX_KEY(0x01, 0x05, KEY_J)
+			 MATRIX_KEY(0x01, 0x06, KEY_K)
+			 MATRIX_KEY(0x01, 0x07, KEY_L)
+
+			 MATRIX_KEY(0x02, 0x00, KEY_E)
+			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
+			 MATRIX_KEY(0x02, 0x02, KEY_UP)
+			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
+			 MATRIX_KEY(0x02, 0x05, KEY_Z)
+			 MATRIX_KEY(0x02, 0x06, KEY_X)
+			 MATRIX_KEY(0x02, 0x07, KEY_C)
+			 MATRIX_KEY(0x02, 0x08, KEY_F9)
+
+			 MATRIX_KEY(0x03, 0x00, KEY_R)
+			 MATRIX_KEY(0x03, 0x01, KEY_V)
+			 MATRIX_KEY(0x03, 0x02, KEY_B)
+			 MATRIX_KEY(0x03, 0x03, KEY_N)
+			 MATRIX_KEY(0x03, 0x04, KEY_M)
+			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
+
+			 MATRIX_KEY(0x04, 0x00, KEY_T)
+			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
+			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
+			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
+			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
+			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
+			 MATRIX_KEY(0x04, 0x08, KEY_F10)
+
+			 MATRIX_KEY(0x05, 0x00, KEY_Y)
+			 MATRIX_KEY(0x05, 0x08, KEY_F11)
+
+			 MATRIX_KEY(0x06, 0x00, KEY_U)
+
+			 MATRIX_KEY(0x07, 0x00, KEY_I)
+			 MATRIX_KEY(0x07, 0x01, KEY_F7)
+			 MATRIX_KEY(0x07, 0x02, KEY_F8)
+			 >;
+};
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+
+	tlv320aic3x: tlv320aic3x@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <1>;
+	};
+
+	tlv320aic3x_aux: tlv320aic3x@19 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x19>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+
+		ai3x-micbias-vg = <2>;
+	};
+
+	tsl2563: tsl2563@29 {
+		compatible = "amstaos,tsl2563";
+		reg = <0x29>;
+
+		amstaos,cover-comp-gain = <16>;
+	};
+
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <50000>;
+		};
+		indicator {
+			led-max-microamp = <17500>;
+		};
+	};
+
+	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		led@0 {
+			reg = <0>;
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+
+		led@1 {
+			reg = <1>;
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+
+		led@2 {
+			reg = <2>;
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+
+		led@3 {
+			reg = <3>;
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+
+		led@4 {
+			reg = <4>;
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led@5 {
+			reg = <5>;
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led@6 {
+			reg = <6>;
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led@7 {
+			reg = <7>;
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+
+		led@8 {
+			reg = <8>;
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+	};
+
+	bq27200: bq27200@55 {
+		compatible = "ti,bq27200";
+		reg = <0x55>;
+		power-supplies = <&bq24150a>;
+	};
+
+	/* Stereo headphone amplifier */
+	tpa6130a2: tpa6130a2@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+
+		Vdd-supply = <&vmmc2>;
+
+		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+	};
+
+	si4713: si4713@63 {
+		compatible = "silabs,si4713";
+		reg = <0x63>;
+
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
+	};
+
+	bq24150a: bq24150a@6b {
+		compatible = "ti,bq24150a";
+		reg = <0x6b>;
+
+		ti,current-limit = <100>;
+		ti,weak-battery-voltage = <3400>;
+		ti,battery-regulation-voltage = <4200>;
+		ti,charge-current = <650>;
+		ti,termination-current = <100>;
+		ti,resistor-sense = <68>;
+
+		ti,usb-charger-detection = <&isp1707>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	lis302dl: lis3lv02d@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+
+		Vdd-supply = <&vaux1>;
+		Vdd_IO-supply = <&vio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <21 20>; /* 181 and 180 */
+
+		/* click flags */
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+
+		/* Limits are 0.5g * value */
+		st,click-threshold-x = <8>;
+		st,click-threshold-y = <8>;
+		st,click-threshold-z = <10>;
+
+		/* Click must be longer than time limit */
+		st,click-time-limit = <9>;
+
+		/* Kind of debounce filter */
+		st,click-latency = <50>;
+
+		/* Interrupt line 2 for click detection */
+		st,irq2-click;
+
+		st,wakeup-x-hi;
+		st,wakeup-y-hi;
+		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+		st,wakeup2-z-hi;
+		st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
+
+		st,hipass1-disable;
+		st,hipass2-disable;
+
+		st,axis-x = <1>;    /* LIS3_DEV_X */
+		st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+		st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+		st,min-limit-x = <(-32)>;
+		st,min-limit-y = <3>;
+		st,min-limit-z = <3>;
+
+		st,max-limit-x = <(-3)>;
+		st,max-limit-y = <32>;
+		st,max-limit-z = <32>;
+	};
+
+	cam1: camera@3e {
+		compatible = "toshiba,et8ek8";
+		reg = <0x3e>;
+
+		vana-supply = <&vaux4>;
+
+		clocks = <&isp 0>;
+		clock-names = "extclk";
+		clock-frequency = <9600000>;
+
+		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+		lens-focus = <&ad5820>;
+
+		port {
+			csi_cam1: endpoint {
+				bus-type = <3>; /* CCP2 */
+				strobe = <1>;
+				clock-inv = <0>;
+				crc = <1>;
+
+				remote-endpoint = <&csi_isp>;
+			};
+		};
+	};
+
+	/* D/A converter for auto-focus */
+	ad5820: dac@c {
+		compatible = "adi,ad5820";
+		reg = <0x0c>;
+
+		VANA-supply = <&vaux4>;
+
+		#io-channel-cells = <0>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* most boards use vaux3, only some old versions use vmmc2 instead */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vaux3>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x01000000 0x01000000>,	/* 16 MB for OneNAND */
+		 <1 0 0x02000000 0x01000000>;	/* 16 MB for smc91c96 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/* sys_ndmareq1 could be used by the driver, not as gpio65 though */
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v5.1
+		 * (OneNAND Manufacturer: Samsung):
+		 *
+		 *   cs0 GPMC_CS_CONFIG1: 0xfb001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00111100
+		 *   cs0 GPMC_CS_CONFIG3: 0x00020200
+		 *   cs0 GPMC_CS_CONFIG4: 0x11001102
+		 *   cs0 GPMC_CS_CONFIG5: 0x03101616
+		 *   cs0 GPMC_CS_CONFIG6: 0x90060000
+		 */
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <102>;
+		gpmc,cs-wr-off-ns = <102>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <12>;
+		gpmc,oe-off-ns = <102>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <102>;
+		gpmc,rd-cycle-ns = <132>;
+		gpmc,wr-cycle-ns = <132>;
+		gpmc,access-ns = <96>;
+		gpmc,page-burst-access-ns = <18>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <6>;
+		gpmc,wr-data-mux-bus-ns = <36>;
+		gpmc,wr-access-ns = <96>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's
+		 * Maemo 5 (Fremantle) release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "log";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "kernel";
+			reg = <0x000c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "initfs";
+			reg = <0x002c0000 0x00200000>;
+		};
+		partition@5 {
+			label = "rootfs";
+			reg = <0x004c0000 0x0fb40000>;
+		};
+	};
+
+	/* Ethernet is on some early development boards and qemu */
+	ethernet@gpmc {
+		compatible = "smsc,lan91c94";
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
+		reg = <1 0 0xf>;		/* 16 byte IO range */
+		bank-width = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ethernet_pins>;
+		power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;	/* gpio86 */
+		reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* gpio164 */
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <48>;
+		gpmc,cs-wr-off-ns = <24>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <0>;
+		gpmc,adv-wr-off-ns = <0>;
+		gpmc,we-on-ns = <12>;
+		gpmc,we-off-ns = <18>;
+		gpmc,oe-on-ns = <12>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,access-ns = <42>;
+		gpmc,rd-cycle-ns = <180>;
+		gpmc,wr-cycle-ns = <180>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <12>;
+	};
+};
+
+&mcspi1 {
+	/*
+	 * For some reason, touchscreen is necessary for screen to work at
+	 * all on real hw. It works well without it on emulator.
+	 *
+	 * Also... order in the device tree actually matters here.
+	 */
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+
+	lcd: acx565akm@2 {
+		compatible = "sony,acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&acx565akm_pins>;
+
+		label = "lcd";
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&sdi_out>;
+			};
+		};
+	};
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+
+	wl1251@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl1251_pins>;
+
+		vio-supply = <&vio>;
+
+		compatible = "ti,wl1251";
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+
+		spi-cpol;
+		spi-cpha;
+
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+		clocks = <&vctcxo>;
+	};
+};
+
+/* RNG not directly accessible on n900, see omap3-rom-rng instead */
+&rng_target {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <2>;
+	power = <50>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bcm2048: bluetooth {
+		compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
+		reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
+		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+		clocks = <&vctcxo>;
+		clock-names = "sysclk";
+	};
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_sdi_pins>;
+
+	vdds_sdi-supply = <&vaux1>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			sdi_out: endpoint {
+				remote-endpoint = <&lcd_in>;
+				datapairs = <2>;
+			};
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <1>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&ssi_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssi_pins>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 000000000..7dde9fbb0
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+
+	vwlan_fixed: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VWLAN";
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "debug::sleep";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;  /* gpio92 */
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&debug_leds>;
+		};
+	};
+
+	/* controlled (enabled/disabled) directly by wl1271 */
+	vctcxo: vctcxo {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&omap3_pmx_core {
+	accelerator_pins: pinmux_accelerator_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4)	/* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4)	/* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+		>;
+	};
+
+	debug_leds: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)      /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)            /* ssi1_wake */
+		>;
+	};
+
+	ssi_pins_idle: pinmux_ssi_pins_idle {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7)    /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)	/* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7)            /* ssi1_wake */
+		>;
+	};
+
+	modem_pins1: pinmux_modem_core1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4)	/* gpio_34 (ape_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	modem_pins2: pinmux_modem_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)         /* gpio_23 (cmt_en) */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+
+	twl_power: power {
+		compatible = "ti,twl4030-power";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+&vdac {
+	regulator-name = "vdac";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vpll1 {
+	regulator-name = "vpll1";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vpll2 {
+	regulator-name = "vpll2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux1 {
+	regulator-name = "vaux1";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+/* CSI-2 receiver */
+&vaux2 {
+	regulator-name = "vaux2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* Cameras */
+&vaux3 {
+	regulator-name = "vaux3";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vaux4 {
+	regulator-name = "vaux4";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "vmmc1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "vmmc2";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vintana1 {
+	regulator-name = "vintana1";
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
+
+&vintana2 {
+	regulator-name = "vintana2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+};
+
+&vintdig {
+	regulator-name = "vintdig";
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
+
+&vsim {
+	regulator-name = "vsim";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "vio";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	as3645a@30 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x30>;
+		compatible = "ams,as3645a";
+		as3645a_flash: flash@0 {
+			reg = <0x0>;
+			flash-timeout-us = <150000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <60000>;
+			ams,input-max-microamp = <1750000>;
+		};
+		as3645a_indicator: indicator@1 {
+			reg = <0x1>;
+			led-max-microamp = <10000>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	lis302: lis302@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+
+		Vdd-supply = <&vaux1>;
+		Vdd_IO-supply = <&vio>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accelerator_pins>;
+
+                interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+		/* click flags */
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+
+		/* Limits are 0.5g * value */
+		st,click-threshold-x = <8>;
+		st,click-threshold-y = <8>;
+		st,click-threshold-z = <10>;
+
+		/* Click must be longer than time limit */
+		st,click-time-limit = <9>;
+
+		/* Kind of debounce filter */
+		st,click-latency = <50>;
+
+		st,wakeup-x-hi;
+		st,wakeup-y-hi;
+		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+		st,wakeup2-z-hi;
+		st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+		st,highpass-cutoff-hz = <2>;
+
+		/* Interrupt line 1 for thresholds */
+		st,irq1-ff-wu-1;
+		st,irq1-ff-wu-2;
+		/* Interrupt line 2 for click detection */
+		st,irq2-click;
+
+		st,wu-duration-1 = <8>;
+		st,wu-duration-2 = <8>;
+	};
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v4.19 using both N950
+		 * and N9 devices (OneNAND Manufacturer: Samsung):
+		 *
+		 *   gpmc cs0 before gpmc_cs_program_settings:
+		 *   cs0 GPMC_CS_CONFIG1: 0xfd001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00181800
+		 *   cs0 GPMC_CS_CONFIG3: 0x00030300
+		 *   cs0 GPMC_CS_CONFIG4: 0x18001804
+		 *   cs0 GPMC_CS_CONFIG5: 0x03171d1d
+		 *   cs0 GPMC_CS_CONFIG6: 0x97080000
+		 */
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <122>;
+		gpmc,cs-wr-off-ns = <122>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <15>;
+		gpmc,oe-on-ns = <20>;
+		gpmc,oe-off-ns = <122>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <122>;
+		gpmc,rd-cycle-ns = <148>;
+		gpmc,wr-cycle-ns = <148>;
+		gpmc,access-ns = <117>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <10>;
+		gpmc,wr-data-mux-bus-ns = <40>;
+		gpmc,wr-access-ns = <117>;
+
+		gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
+
+&ssi_port1 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&ssi_pins>;
+	pinctrl-1 = <&ssi_pins_idle>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins1 &modem_pins2>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <96000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
+
+		gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
+			<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
+			<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+		reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
+		host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+		bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+
+		clocks = <&vctcxo>;
+		clock-names = "sysclk";
+	};
+};
+
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
new file mode 100644
index 000000000..b2f480022
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	keys {
+		compatible = "gpio-keys";
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_slide_pins>;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	keypad_slide_pins: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)       /* cam_d10.gpio_109 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	dsi_pins: pinmux_dsi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+   */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk-   */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */
+		>;
+	};
+
+	display_pins: pinmux_display_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */
+		>;
+	};
+};
+
+&i2c2 {
+	smia_1: camera@10 {
+		compatible = "nokia,smia";
+		reg = <0x10>;
+		/* No reset gpio */
+		vana-supply = <&vaux3>;
+		clocks = <&isp 0>;
+		clock-frequency = <9600000>;
+		flash-leds = <&as3645a_flash &as3645a_indicator>;
+		port {
+			smia_1_1: endpoint {
+				link-frequencies = /bits/ 64 <210000000 333600000 398400000>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2a_ep>;
+			};
+		};
+	};
+};
+
+&isp {
+	vdd-csiphy1-supply = <&vaux2>;
+	vdd-csiphy2-supply = <&vaux2>;
+	ports {
+		port@2 {
+			reg = <2>;
+			csi2a_ep: endpoint {
+				remote-endpoint = <&smia_1_1>;
+				clock-lanes = <2>;
+				data-lanes = <3 1>;
+				crc = <1>;
+				lane-polarities = <1 1 1>;
+			};
+		};
+	};
+};
+
+&mcspi4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
+
+&modem {
+	compatible = "nokia,n950-modem";
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH)
+			 MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT)
+			 MATRIX_KEY(0x02, 0x00, KEY_COMPOSE)
+			 MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA)
+			 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			 MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE)
+			 MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN)
+			 MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP)
+
+			 MATRIX_KEY(0x03, 0x01, KEY_Z)
+			 MATRIX_KEY(0x04, 0x01, KEY_A)
+			 MATRIX_KEY(0x05, 0x01, KEY_Q)
+			 MATRIX_KEY(0x06, 0x01, KEY_W)
+			 MATRIX_KEY(0x07, 0x01, KEY_E)
+
+			 MATRIX_KEY(0x03, 0x02, KEY_X)
+			 MATRIX_KEY(0x04, 0x02, KEY_S)
+			 MATRIX_KEY(0x05, 0x02, KEY_D)
+			 MATRIX_KEY(0x06, 0x02, KEY_C)
+			 MATRIX_KEY(0x07, 0x02, KEY_V)
+
+			 MATRIX_KEY(0x03, 0x03, KEY_O)
+			 MATRIX_KEY(0x04, 0x03, KEY_I)
+			 MATRIX_KEY(0x05, 0x03, KEY_U)
+			 MATRIX_KEY(0x06, 0x03, KEY_L)
+			 MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE)
+
+			 MATRIX_KEY(0x03, 0x04, KEY_Y)
+			 MATRIX_KEY(0x04, 0x04, KEY_K)
+			 MATRIX_KEY(0x05, 0x04, KEY_J)
+			 MATRIX_KEY(0x06, 0x04, KEY_H)
+			 MATRIX_KEY(0x07, 0x04, KEY_G)
+
+			 MATRIX_KEY(0x03, 0x05, KEY_B)
+			 MATRIX_KEY(0x04, 0x05, KEY_COMMA)
+			 MATRIX_KEY(0x05, 0x05, KEY_M)
+			 MATRIX_KEY(0x06, 0x05, KEY_N)
+			 MATRIX_KEY(0x07, 0x05, KEY_DOT)
+
+			 MATRIX_KEY(0x00, 0x06, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x06, KEY_T)
+			 MATRIX_KEY(0x04, 0x06, KEY_UP)
+			 MATRIX_KEY(0x05, 0x06, KEY_LEFT)
+			 MATRIX_KEY(0x06, 0x06, KEY_RIGHT)
+			 MATRIX_KEY(0x07, 0x06, KEY_DOWN)
+
+			 MATRIX_KEY(0x03, 0x07, KEY_P)
+			 MATRIX_KEY(0x04, 0x07, KEY_ENTER)
+			 MATRIX_KEY(0x05, 0x07, KEY_SLASH)
+			 MATRIX_KEY(0x06, 0x07, KEY_F)
+			 MATRIX_KEY(0x07, 0x07, KEY_R)
+			 >;
+};
+
+&lis302 {
+	st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-32)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <32>;
+	st,max-limit-z = <32>;
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&vdac>;
+};
+
+&dsi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dsi_pins>;
+
+	vdd-supply = <&vpll2>;
+
+	port {
+		dsi_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <2 3 0 1 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "nokia,himalaya", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pins>;
+
+		vpnl-supply = <&vmmc2>;
+		vddi-supply = <&vio>;
+
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;	/* 87 */
+		te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;	/* 62 */
+
+		width-mm = <49>; /* 48.960 mm */
+		height-mm = <88>; /* 88.128 mm */
+
+		/* TODO:
+		 * - panel is upside-down
+		 * - top + bottom 5px are not visible
+		 */
+		panel-timing {
+			clock-frequency = <0>;          /* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <480>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <864>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi_out_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
new file mode 100644
index 000000000..bb932913c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		gpio148 {
+			label = "overo:red:gpio148";
+			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
+		};
+		gpio150 {
+			label = "overo:yellow:gpio150";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
+		};
+		gpio151 {
+			label = "overo:blue:gpio151";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
+		};
+		gpio170 {
+			label = "overo:green:gpio170";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
+			wakeup-source;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
+		>;
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts
new file mode 100644
index 000000000..37c64dd5f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
new file mode 100644
index 000000000..971d3e250
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		overo {
+			label = "overo:blue:COM";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "overo";
+
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;		/* gpio_168: vbus enable */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	/* Regulator to trigger the nPoweron signal of the Wifi module */
+	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-npoweron";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the nReset signal of the Wifi module */
+	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-wifi-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* WiFi/BT combo */
+	w3cbw003c_pins: pinmux_w3cbw003c_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&w3cbw003c_npoweron>;
+	vqmmc-supply = <&w3cbw003c_wifi_nreset>;
+	bus-width = <4>;
+	cap-sdio-irq;
+	non-removable;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x80000>; /* 512KiB */
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1C0000>; /* 1792KiB */
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>; /* 256KiB */
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x800000>; /* 8192KiB */
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0xA80000 0>;
+			/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 000000000..2d2c61d7a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			wakeup-source;
+		};
+		button1 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			wakeup-source;
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
new file mode 100644
index 000000000..d147d704b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
new file mode 100644
index 000000000..339a51fa4
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &dvi0;
+	};
+
+	tfp410: encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 000000000..c3570acc3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lb035_pins: pinmux_lb035_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs1.mcspi1_cs1 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	lcd0: display@1 {
+		compatible = "lgphilips,lb035q02";
+		label = "lcd35";
+
+		reg = <1>;					/* CS1 */
+		spi-max-frequency = <500000>;
+		spi-cpol;
+		spi-cpha;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb035_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 000000000..d95a0e130
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd43";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		wakeup-source;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 000000000..8a4a02472
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+	lis33_3v3: lis33-3v3-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-3v3-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lis33_1v8: lis33-1v8-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-1v8-reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_core {
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	lis33de: lis33de@1d {
+		compatible = "st,lis33de", "st,lis3lv02d";
+		reg = <0x1d>;
+		Vdd-supply = <&lis33_1v8>;
+		Vdd_IO-supply = <&lis33_3v3>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 000000000..155aec121
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			wakeup-source;
+		};
+		button1 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			wakeup-source;
+		};
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43.dts b/arch/arm/boot/dts/omap3-overo-gallop43.dts
new file mode 100644
index 000000000..24b40bdf7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-gallop43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
new file mode 100644
index 000000000..82a044667
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			wakeup-source;
+		};
+		button1 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts
new file mode 100644
index 000000000..55e08d56b
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo35.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
new file mode 100644
index 000000000..453a55324
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			wakeup-source;
+		};
+		button1 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			wakeup-source;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-palo43.dts b/arch/arm/boot/dts/omap3-overo-palo43.dts
new file mode 100644
index 000000000..092c8325a
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-palo43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
new file mode 100644
index 000000000..7f04dfad8
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 000000000..bc5a04e03
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
new file mode 100644
index 000000000..065c31cbf
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
new file mode 100644
index 000000000..e38c1c513
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * Palo35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
new file mode 100644
index 000000000..e6dc23159
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
new file mode 100644
index 000000000..587c08ce2
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
new file mode 100644
index 000000000..f57de6010
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
new file mode 100644
index 000000000..281af6c11
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-storm.dtsi b/arch/arm/boot/dts/omap3-overo-storm.dtsi
new file mode 100644
index 000000000..2af15d5f6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-storm.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
new file mode 100644
index 000000000..df7450f17
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-summit.dts b/arch/arm/boot/dts/omap3-overo-summit.dts
new file mode 100644
index 000000000..a6c9799fe
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-summit.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
new file mode 100644
index 000000000..9bf4b88a4
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobi.dts b/arch/arm/boot/dts/omap3-overo-tobi.dts
new file mode 100644
index 000000000..ce3f2404f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobi.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
new file mode 100644
index 000000000..218a10c0d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	smsc1: ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+
+		reg = <4 0 0xff>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 65 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
new file mode 100644
index 000000000..fc6163eae
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Ash Charles, Gumstix, Inc.
+ */
+
+/*
+ * TobiDuo expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobiduo-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on TobiDuo";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
new file mode 100644
index 000000000..cc9263e99
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
new file mode 100644
index 000000000..ea509956d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ *   Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * device tree for OpenPandora 1GHz with DM3730
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+	model = "Pandora Handheld Console 1GHz";
+
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusb2_2_pins
+		&control_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+		>;
+	};
+
+	control_pins: pinmux_control_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 =  RESET_USB_HOST */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4)		/* etk_d7.gpio_21 =  WIFI IRQ */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)		/* etk_d8.gpio_22 =  MSECURE */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4)		/* etk_d9.gpio_23 =  WIFI_POWER */
+			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT | MUX_MODE4)   		/* reserved.gpio_127 = MMC2_WP */
+			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   		/* reserved.gpio_126 = MMC1_WP */
+			OMAP3_WKUP_IOPAD(0x2a58, PIN_OUTPUT | MUX_MODE4)   		/* reserved.gpio_128 = LED_MMC1 */
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_OUTPUT | MUX_MODE4)   		/* reserved.gpio_129 = LED_MMC2 */
+
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
new file mode 100644
index 000000000..6bd904194
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ *   Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * device tree for OpenPandora with OMAP3530
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-pandora-common.dtsi"
+
+/ {
+	model = "Pandora Handheld Console";
+
+	compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusb2_2_pins
+		&control_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+		>;
+	};
+
+	control_pins: pinmux_control_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* etk_d0.gpio_14 =  HP_SHUTDOWN */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_OUTPUT | MUX_MODE4)		/* etk_d1.gpio_15 =  BT_SHUTDOWN */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 =  RESET_USB_HOST */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE4)		/* etk_d7.gpio_21 =  WIFI IRQ */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)		/* etk_d8.gpio_22 =  MSECURE */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_OUTPUT | MUX_MODE4)		/* etk_d9.gpio_23 =  WIFI_POWER */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
new file mode 100644
index 000000000..ca6d777eb
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015
+ *   Nikolaus Schaller <hns@goldelico.com>
+ *
+ * Common device tree include for OpenPandora devices.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &lcd;
+	};
+
+	/* fixed 26MHz oscillator */
+	hfclk_26m: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tv: connector {
+		compatible = "connector-analog-tv";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	gpio-leds {
+
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			label = "pandora::sd1";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "pandora::sd2";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "pandora::bluetooth";
+			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "pandora::wifi";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+
+		up-button {
+			label = "up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;	/* GPIO_110 */
+			wakeup-source;
+		};
+
+		down-button {
+			label = "down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;	/* GPIO_103 */
+			wakeup-source;
+		};
+
+		left-button {
+			label = "left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;	/* GPIO_96 */
+			wakeup-source;
+		};
+
+		right-button {
+			label = "right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;	/* GPIO_98 */
+			wakeup-source;
+		};
+
+		pageup-button {
+			label = "game 1";
+			linux,code = <KEY_PAGEUP>;
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;	/* GPIO_109 */
+			wakeup-source;
+		};
+
+		pagedown-button {
+			label = "game 3";
+			linux,code = <KEY_PAGEDOWN>;
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* GPIO_106 */
+			wakeup-source;
+		};
+
+		home-button {
+			label = "game 4";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* GPIO_101 */
+			wakeup-source;
+		};
+
+		end-button {
+			label = "game 2";
+			linux,code = <KEY_END>;
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* GPIO_111 */
+			wakeup-source;
+		};
+
+		right-shift {
+			label = "l";
+			linux,code = <KEY_RIGHTSHIFT>;
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;	/* GPIO_102 */
+			wakeup-source;
+		};
+
+		kp-plus {
+			label = "l2";
+			linux,code = <KEY_KPPLUS>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;	/* GPIO_97 */
+			wakeup-source;
+		};
+
+		right-ctrl {
+			label = "r";
+			linux,code = <KEY_RIGHTCTRL>;
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;	/* GPIO_105 */
+			wakeup-source;
+		};
+
+		kp-minus {
+			label = "r2";
+			linux,code = <KEY_KPMINUS>;
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;	/* GPIO_107 */
+			wakeup-source;
+		};
+
+		left-ctrl {
+			label = "ctrl";
+			linux,code = <KEY_LEFTCTRL>;
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;	/* GPIO_104 */
+			wakeup-source;
+		};
+
+		menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;	/* GPIO_99 */
+			wakeup-source;
+		};
+
+		hold {
+			label = "hold";
+			linux,code = <KEY_COFFEE>;
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* GPIO_176 */
+			wakeup-source;
+		};
+
+		left-alt {
+			label = "alt";
+			linux,code = <KEY_LEFTALT>;
+			gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;	/* GPIO_100 */
+			wakeup-source;
+		};
+
+		lid {
+			label = "lid";
+			linux,code = <0x00>;    /* SW_LID lid shut */
+			linux,input-type = <0x05>;    /* EV_SW */
+			gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;   /* GPIO_108 */
+		};
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
+		vcc-supply = <&vaux2>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host VBUS supply
+	 * disabling this regulator causes current leakage, and LCD flicker
+	 * on earlier (CC) board revisions, so keep it always on */
+	usb_host_5v: fixed-regulator-usb_host_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
+	};
+
+	/* wl1251 wifi+bt module */
+	wlan_en: fixed-regulator-wg7210_en {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* wg7210 (wifi+bt module) 32k clock buffer */
+	wg7210_32k: fixed-regulator-wg7210_32k {
+		compatible = "regulator-fixed";
+		regulator-name = "wg7210_32k";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&omap3_pmx_core {
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dirdat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dirdat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dircmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* GPIO_157 = lcd reset */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	led_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4)	/* GPIO_128 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)	/* GPIO_129 */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4)	/* GPIO_158 */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4)	/* GPIO_159 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4)	/* GPIO_96 */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4)	/* GPIO_97 */
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)	/* GPIO_98 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4)	/* GPIO_99 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4)	/* GPIO_100 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* GPIO_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* GPIO_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* GPIO_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* GPIO_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* GPIO_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* GPIO_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* GPIO_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* GPIO_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* GPIO_109 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4)	/* GPIO_110 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)	/* GPIO_111 */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)	/* GPIO_176 */
+		>;
+	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4)	/* GPIO_94 */
+		>;
+	};
+
+};
+
+&omap3_pmx_core2 {
+	/* define in CPU specific file that includes this one
+	 * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
+	 */
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		clocks = <&hfclk_26m>;
+		clock-names = "fck";
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-reset";
+			ti,use_poweroff;
+		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <6>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_9)
+		MATRIX_KEY(0, 1, KEY_8)
+		MATRIX_KEY(0, 2, KEY_I)
+		MATRIX_KEY(0, 3, KEY_J)
+		MATRIX_KEY(0, 4, KEY_N)
+		MATRIX_KEY(0, 5, KEY_M)
+		MATRIX_KEY(1, 0, KEY_0)
+		MATRIX_KEY(1, 1, KEY_7)
+		MATRIX_KEY(1, 2, KEY_U)
+		MATRIX_KEY(1, 3, KEY_H)
+		MATRIX_KEY(1, 4, KEY_B)
+		MATRIX_KEY(1, 5, KEY_SPACE)
+		MATRIX_KEY(2, 0, KEY_BACKSPACE)
+		MATRIX_KEY(2, 1, KEY_6)
+		MATRIX_KEY(2, 2, KEY_Y)
+		MATRIX_KEY(2, 3, KEY_G)
+		MATRIX_KEY(2, 4, KEY_V)
+		MATRIX_KEY(2, 5, KEY_FN)
+		MATRIX_KEY(3, 0, KEY_O)
+		MATRIX_KEY(3, 1, KEY_5)
+		MATRIX_KEY(3, 2, KEY_T)
+		MATRIX_KEY(3, 3, KEY_F)
+		MATRIX_KEY(3, 4, KEY_C)
+		MATRIX_KEY(4, 0, KEY_P)
+		MATRIX_KEY(4, 1, KEY_4)
+		MATRIX_KEY(4, 2, KEY_R)
+		MATRIX_KEY(4, 3, KEY_D)
+		MATRIX_KEY(4, 4, KEY_X)
+		MATRIX_KEY(5, 0, KEY_K)
+		MATRIX_KEY(5, 1, KEY_3)
+		MATRIX_KEY(5, 2, KEY_E)
+		MATRIX_KEY(5, 3, KEY_S)
+		MATRIX_KEY(5, 4, KEY_Z)
+		MATRIX_KEY(6, 0, KEY_L)
+		MATRIX_KEY(6, 1, KEY_2)
+		MATRIX_KEY(6, 2, KEY_W)
+		MATRIX_KEY(6, 3, KEY_A)
+		MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
+		MATRIX_KEY(7, 0, KEY_ENTER)
+		MATRIX_KEY(7, 1, KEY_1)
+		MATRIX_KEY(7, 2, KEY_Q)
+		MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
+		MATRIX_KEY(7, 4, KEY_LEFTBRACE )
+	 >;
+};
+
+/* backup battery charger */
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+/* MMC2 */
+&vmmc2 {
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* LCD */
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+/* USB Host PHY */
+&vaux2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* available on expansion connector */
+&vaux3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+/* ADS7846 and nubs */
+&vaux4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+/* power audio DAC and LID sensor */
+&vsim {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	/* no clients so we should disable clock */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+/*
+ * Many pandora boards have been produced with defective write-protect switches
+ * on either slot, so it was decided not to use this feature. If you know
+ * your board has good switches, feel free to uncomment wp-gpios below.
+ */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+	/*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/	/* GPIO_126 */
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc2>;
+	bus-width = <4>;
+	cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
+};
+
+&mmc3 {
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
+};
+
+/* bluetooth*/
+&uart1 {
+};
+
+/* spare (expansion connector) */
+&uart2 {
+};
+
+/* console (expansion connector) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
+
+		x-loader@0 {
+			label = "xloader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "uboot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "uboot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "boot";
+			reg = <0x280000 0xa00000>;
+		};
+
+		filesystem@c80000 {
+			label = "rootfs";
+			reg = <0xc80000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;	/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vaux4>;
+
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		wakeup-source;
+	};
+
+	lcd: lcd@1 {
+		reg = <1>;	/* CS1 */
+		compatible =	"tpo,td043mtea1";
+		spi-max-frequency = <100000>;
+		spi-cpol;
+		spi-cpha;
+
+		label = "lcd";
+		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;	/* GPIO_157 */
+		vcc-supply = <&vaux1>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+
+};
+
+/* n/a - used as GPIOs */
+&mcbsp1 {
+};
+
+/* audio DAC */
+&mcbsp2 {
+};
+
+/* bluetooth */
+&mcbsp3 {
+};
+
+/* to twl4030*/
+&mcbsp4 {
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000..2dbb687d4
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+		envdd-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
new file mode 100644
index 000000000..fb9842fa9
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
+ */
+
+/ {
+	tfp410: encoder {
+		compatible = "ti,tfp410";
+
+		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: dvi-connector {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	audio_amp: audio_amp {
+		compatible = "regulator-fixed";
+		regulator-name = "audio_amp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sb_t35_audio_amp>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	smsc2_pins: pinmux_smsc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+		>;
+	};
+
+	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&gpmc {
+	ranges = <4 0 0x2d000000 0x01000000>;
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc2_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <4 0 0xff>;
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
new file mode 100644
index 000000000..a69d32860
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3517 with CM-T3517";
+	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&sb_t35_usb_hub_pins
+			&usb_hub_pins
+		    >;
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+		>;
+	};
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+
+	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
new file mode 100644
index 000000000..24bf3fd86
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3530 with CM-T3530";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
+		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
+
+&mmc1 {
+	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
new file mode 100644
index 000000000..eb3893b95
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab SBC-T3730 with CM-T3730
+ */
+
+#include "omap3-cm-t3730.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3730 with CM-T3730";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
+		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
new file mode 100644
index 000000000..b6879cdc5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LG Optimus Black";
+	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
+		>;
+	};
+
+	dp3t_sel_pins: pinmux_dp3t_sel_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	lp8720_en_pin: pinmux_lp8720_en_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	mmc1_cd_pin: pinmux_mmc1_cd_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
+		>;
+	};
+};
+
+&gpio2 {
+	ti,no-reset-on-init;
+};
+
+&gpio5 {
+	ti,no-reset-on-init;
+};
+
+&gpio6 {
+	ti,no-reset-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	lp8720@7d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp8720_en_pin>;
+
+		compatible = "ti,lp8720";
+		reg = <0x7d>;
+
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+		lp8720_ldo1: ldo1 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+
+	vmmc-supply = <&lp8720_ldo1>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP)
+		MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x02, 0x00, KEY_SELECT)
+	>;
+};
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&vdac {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
new file mode 100644
index 000000000..580bfa193
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;	/* gpio_162 */
+		vcc-supply = <&hsusb2_power>;
+		#phy-cells = <0>;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		/* McBSP2 is used for onboard sound, same as on beagle */
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	/* Regulator to enable/switch the vcc of the Wifi module */
+	mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-poweron";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;		/* gpio_157 */
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* wlan GPIO output for WLAN_EN */
+	wlan_gpio: pinmux_wlan_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr gpio_157 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+                        OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1)	/* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1)	/* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1)	/* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1)	/* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+};
+
+/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
+&mcbsp1 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	spidev@0 {
+		compatible = "spidev";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpha;
+	};
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+
+	spidev@0 {
+		compatible = "spidev";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpha;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+	bus-width = <8>;
+};
+
+// WiFi (Marvell 88W8686) on MMC2/SDIO
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_poweron>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mcbsp3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;	/* GPMC_DEVWIDTH_16BIT */
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
new file mode 100644
index 000000000..d82cab8e2
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+	model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
+	compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <2>;
+			vfront-porch = <3>;
+			vsync-len = <11>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
+
+		default-on;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
new file mode 100644
index 000000000..ce58b1f20
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_2_pins: pinmux_mmc3_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 000000000..c5b9da0d7
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,1026 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0x0>;
+
+			clocks = <&dpll1_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	pmu@54000000 {
+		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
+		interrupts = <3>;
+		ti,hwmods = "debugss";
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva: iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp@68000000 {
+		compatible = "ti,omap3-l3-smx", "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		l4_core: l4@48000000 {
+			compatible = "ti,omap3-l4-core", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x1000000>;
+
+			scm: scm@2000 {
+				compatible = "ti,omap3-scm", "simple-bus";
+				reg = <0x2000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				omap3_pmx_core: pinmux@30 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0x30 0x238>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+
+				scm_conf: scm_conf@270 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x270 0x330>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x270 0x330>;
+
+					pbias_regulator: pbias_regulator@2b0 {
+						compatible = "ti,pbias-omap3", "ti,pbias-omap";
+						reg = <0x2b0 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap2430 {
+							regulator-name = "pbias_mmc_omap2430";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3000000>;
+						};
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+
+				omap3_pmx_wkup: pinmux@a00 {
+					compatible = "ti,omap3-padconf",
+						     "pinctrl-single";
+					reg = <0xa00 0x5c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0xff1f>;
+				};
+			};
+		};
+
+		aes1_target: target-module@480a6000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480a6044 0x4>,
+			      <0x480a6048 0x4>,
+			      <0x480a604c 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&aes1_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480a6000 0x2000>;
+
+			aes1: aes1@0 {
+				compatible = "ti,omap3-aes";
+				reg = <0 0x50>;
+				interrupts = <0>;
+				dmas = <&sdma 9 &sdma 10>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@480c5000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480c5044 0x4>,
+			      <0x480c5048 0x4>,
+			      <0x480c504c 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&aes2_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480c5000 0x2000>;
+
+			aes2: aes2@0 {
+				compatible = "ti,omap3-aes";
+				reg = <0 0x50>;
+				interrupts = <0>;
+				dmas = <&sdma 65 &sdma 66>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		prm: prm@48306000 {
+			compatible = "ti,omap3-prm";
+			reg = <0x48306000 0x4000>;
+			interrupts = <11>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm: cm@48004000 {
+			compatible = "ti,omap3-cm";
+			reg = <0x48004000 0x4000>;
+
+			cm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_clockdomains: clockdomains {
+			};
+		};
+
+		target-module@48320000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48320000 0x4>,
+			      <0x48320004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			clocks = <&wkup_32k_fck>, <&omap_32ksync_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48320000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x20>;
+			};
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
+			clocks = <&core_l3_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap3430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <96>;
+			};
+		};
+
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x48310000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49050000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49052000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49054000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49056000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49058000 0x200>;
+			interrupts = <34>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts-extended = <&intc 72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts-extended = <&intc 73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@49020000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts-extended = <&intc 74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <2>;
+			ti,mbox-num-fifos = <2>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>,
+			       <&sdma 16>,
+			       <&sdma 23>,
+			       <&sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
+			ti,hwmods = "mmc3";
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmu_isp: mmu@480bd400 {
+			#iommu-cells = <0>;
+			compatible = "ti,omap2-iommu";
+			reg = <0x480bd400 0x80>;
+			interrupts = <24>;
+			ti,hwmods = "mmu_isp";
+			ti,#tlb-entries = <8>;
+		};
+
+		mmu_iva: mmu@5d000000 {
+			#iommu-cells = <0>;
+			compatible = "ti,omap2-iommu";
+			reg = <0x5d000000 0x80>;
+			interrupts = <28>;
+			ti,hwmods = "mmu_iva";
+			status = "disabled";
+		};
+
+		wdt2: wdt@48314000 {
+			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp1_fck>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		/* Likely needs to be tagged disabled on HS devices */
+		rng_target: target-module@480a0000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480a003c 0x4>,
+			      <0x480a0040 0x4>,
+			      <0x480a0044 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&rng_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480a0000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap2-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <52>;
+			};
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+			clock-names = "fck", "ick";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+			clock-names = "fck", "ick";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp4_fck>;
+			clock-names = "fck";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+			dmas = <&sdma 21>,
+			       <&sdma 22>;
+			dma-names = "tx", "rx";
+			clocks = <&mcbsp5_fck>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+			dmas = <&sdma 69>;
+			dma-names = "rx";
+		};
+
+		timer1_target: target-module@48318000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x48318000 0x4>,
+			      <0x48318010 0x4>,
+			      <0x48318014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt1_fck>, <&gpt1_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48318000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&gpt1_fck>;
+				clock-names = "fck";
+				interrupts = <37>;
+				ti,timer-alwon;
+			};
+		};
+
+		timer2_target: target-module@49032000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x49032000 0x4>,
+			      <0x49032010 0x4>,
+			      <0x49032014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt2_fck>, <&gpt2_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49032000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0 0x400>;
+				interrupts = <38>;
+			};
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12_target: target-module@48304000 {
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x48304000 0x4>,
+			      <0x48304010 0x4>,
+			      <0x48304014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&gpt12_fck>, <&gpt12_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48304000 0x1000>;
+
+			timer12: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0 0x400>;
+				interrupts = <95>;
+				ti,timer-alwon;
+				ti,timer-secure;
+			};
+		};
+
+		usbhstll: usbhstll@48062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x48062000 0x1000>;
+			interrupts = <78>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@48064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x48064000 0x400>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@48064400 {
+				compatible = "ti,ohci-omap3";
+				reg = <0x48064400 0x400>;
+				interrupts = <76>;
+				remote-wakeup-connected;
+			};
+
+			usbhsehci: ehci@48064800 {
+				compatible = "ti,ehci-omap";
+				reg = <0x48064800 0x400>;
+				interrupts = <77>;
+			};
+		};
+
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap3430-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x6e000000 0x02d0>;
+			interrupts = <20>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <92>, <93>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x48050000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss1_alwon_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss1_alwon_fck>;
+				clock-names = "fck";
+			};
+
+			dsi: encoder@4804fc00 {
+				compatible = "ti,omap3-dsi";
+				reg = <0x4804fc00 0x200>,
+				      <0x4804fe00 0x40>,
+				      <0x4804ff00 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <25>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+				clock-names = "fck", "sys_clk";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x48050800 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss1_alwon_fck>, <&dss_ick>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap3-venc";
+				reg = <0x48050c00 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			status = "disabled";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@4805a000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupts = <67>,
+					     <68>;
+			};
+
+			ssi_port2: ssi-port@4805b000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupts = <69>,
+					     <70>;
+			};
+		};
+	};
+};
+
+#include "omap3xxx-clocks.dtsi"
+
+/* Preferred always-on timer for clockevent. Some boards must use dmtimer12 */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt1_fck>;
+		assigned-clock-parents = <&omap_32k_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
new file mode 100644
index 000000000..7d530ae34
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TI OMAP3430 SDP";
+	compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vqmmc-supply = <&vsim>;
+	/*
+	 * S6-3 must be in ON position for 8 bit mode to function
+	 * Else, use 4 bit mode
+	 */
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x10000000 0x08000000>,
+		 <1 0 0x28000000 0x1000000>,	/* CS1: 16MB for NAND */
+		 <2 0 0x20000000 0x1000000>;	/* CS2: 16MB for OneNAND */
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		linux,mtd-name= "intel,pf48f6000m0y1be";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x08000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		partition@0 {
+			label = "bootloader-nor";
+			reg = <0 0x40000>;
+		};
+		partition@40000 {
+			label = "params-nor";
+			reg = <0x40000 0x40000>;
+		};
+		partition@80000 {
+			label = "kernel-nor";
+			reg = <0x80000 0x200000>;
+		};
+		partition@280000 {
+			label = "filesystem-nor";
+			reg = <0x240000 0x7d80000>;
+		};
+	};
+
+	nand@1,0 {
+		compatible = "ti,omap2-nand";
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name= "micron,mt29f1g08abb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "sw";
+		nand-bus-width = <8>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		partition@0 {
+			label = "xloader-nand";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "bootloader-nand";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "params-nand";
+			reg = <0x1c0000 0xc0000>;
+		};
+		partition@280000 {
+			label = "kernel-nand";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "filesystem-nand";
+			reg = <0x780000 0x7880000>;
+		};
+	};
+
+	onenand@2,0 {
+		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <2 0 0x20000>;	/* CS2, offset 0, IO size 4 */
+
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <84>;
+		gpmc,cs-wr-off-ns = <72>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <18>;
+		gpmc,oe-on-ns = <30>;
+		gpmc,oe-off-ns = <84>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <42>;
+		gpmc,rd-cycle-ns = <108>;
+		gpmc,wr-cycle-ns = <96>;
+		gpmc,access-ns = <78>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+
+		partition@0 {
+			label = "xloader-onenand";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "bootloader-onenand";
+			reg = <0x80000 0x40000>;
+		};
+		partition@c0000 {
+			label = "params-onenand";
+			reg = <0xc0000 0x20000>;
+		};
+		partition@e0000 {
+			label = "kernel-onenand";
+			reg = <0xe0000 0x200000>;
+		};
+		partition@2e0000 {
+			label = "filesystem-onenand";
+			reg = <0x2e0000 0xfd20000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
new file mode 100644
index 000000000..2ec3628d3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+	gfx_l3_ck: gfx_l3_ck@b10 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	gfx_l3_fck: gfx_l3_fck@b40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,max-div = <7>;
+		reg = <0x0b40>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_l3_ick: gfx_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gfx_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gfx_cg1_ck: gfx_cg1_ck@b00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <1>;
+	};
+
+	gfx_cg2_ck: gfx_cg2_ck@b00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <2>;
+	};
+
+	d2d_26m_fck: d2d_26m_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <3>;
+	};
+
+	fshostusb_fck: fshostusb_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <5>;
+	};
+
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+	};
+
+	ssi_sst_fck: ssi_sst_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	fac_ick: fac_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <8>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick: ssi_ick_3430es1@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <5>;
+		reg = <0x0a10>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <4>;
+		ti,max-div = <1>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick: dss_ick_3430es1@e10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+	};
+
+	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck>, <&dss_ick>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&d2d_26m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 000000000..21079cdf2
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk@f00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick@f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck@f00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick@a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck@44 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck@0 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick@a18 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&rng_ick>, <&mspro_fck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
new file mode 100644
index 000000000..feaa43b78
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu: cpu@0 {
+			/* OMAP343x/OMAP35xx variants OPP1-6 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From legacy driver */
+			#cooling-cells = <2>;
+		};
+	};
+
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp1-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 3-3 of the omap3530 Data sheet (SPRS507F).
+			 * Format is: <target min max>
+			 */
+			opp-microvolt = <975000 975000 975000>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one 720MHz Device Identification bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp2-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1075000 1075000 1075000>;
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp3-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp4-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-microvolt = <1275000 1275000 1275000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp5-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp6-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			/* only high-speed grade omap3530 devices */
+			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
+		};
+	};
+
+	ocp@68000000 {
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		isp: isp@480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x017c>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x6c>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		bandgap: bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap34xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
+
+		target-module@480cb000 {
+			compatible = "ti,sysc-omap3430-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb024 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
+			clocks = <&sr2_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480cb000 0x001000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap3-smartreflex-core";
+				reg = <0 0x400>;
+				interrupts = <19>;
+			};
+		};
+
+		target-module@480c9000 {
+			compatible = "ti,sysc-omap3430-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9024 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_CLOCKACTIVITY>;
+			clocks = <&sr1_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480c9000 0x001000>;
+
+			smartreflex_mpu_iva: smartreflex@480c9000 {
+				compatible = "ti,omap3-smartreflex-mpu-iva";
+				reg = <0 0x400>;
+				interrupts = <18>;
+			};
+		};
+
+		/*
+		 * On omap34xx the OCP registers do not seem to be accessible
+		 * at all unlike on 36xx. Maybe SGX is permanently set to
+		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+		 * write-only at 0x50000e10. We detect SGX based on the SGX
+		 * revision register instead of the unreadable OCP revision
+		 * register. Also note that on early 34xx es1 revision there
+		 * are also different clocks, but we do not have any dts users
+		 * for it.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000014 0x4>;
+			reg-names = "rev";
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
+};
+
+&ssi {
+	status = "okay";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000..9974d5226
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm_clocks {
+	dpll5_ck: dpll5_ck@d04 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck@d50 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck@b00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck@b40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick@b10 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck@a08 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick@a18 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick: dss_ick_3430es2@e10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck@1400 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck@1400 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick@1410 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck>, <&dss_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
new file mode 100644
index 000000000..4e9cc9003
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+	dpll4_ck: dpll4_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+};
+
+&dpll4_m2x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&cm_clockdomains {
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
+
+&dpll4_m4_ck {
+	ti,max-div = <31>;
+};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000..945537aee
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_clocks {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick: ssi_ick_3430es2@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
new file mode 100644
index 000000000..05fe5ed12
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -0,0 +1,251 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/media/omap3-isp.h>
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	cpus {
+		/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
+		cpu: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			vbb-supply = <&abb_mpu_iva>;
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+			#cooling-cells = <2>;
+		};
+	};
+
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/*
+			 * we currently only select the max voltage from table
+			 * Table 4-19 of the DM3730 Data sheet (SPRS685B)
+			 * Format is:	cpu0-supply:	<target min max>
+			 *		vbb-supply:	<target min max>
+			 */
+			opp-microvolt = <1012500 1012500 1012500>,
+					 <1012500 1012500 1012500>;
+			/*
+			 * first value is silicon revision bit mask
+			 * second one is "speed binned" bit mask
+			 */
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1200000 1200000>,
+					 <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp130-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1325000 1325000 1325000>,
+					 <1325000 1325000 1325000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp1g-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1375000 1375000 1375000>,
+					 <1375000 1375000 1375000>;
+			/* only on am/dm37x with speed-binned bit set */
+			opp-supported-hw = <0xffffffff 2>;
+			turbo-mode;
+		};
+	};
+
+	opp_supply_mpu_iva: opp_supply {
+		compatible = "ti,omap-opp-supply";
+		ti,absolute-max-voltage-uv = <1375000>;
+	};
+
+	ocp@68000000 {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		abb_mpu_iva: regulator-abb-mpu {
+			compatible = "ti,abb-v1";
+			regulator-name = "abb_mpu_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+			reg-names = "base-address", "int-address";
+			ti,tranxdone-status-mask = <0x4000000>;
+			clocks = <&sys_ck>;
+			ti,settling-time = <30>;
+			ti,clock-cycles = <8>;
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1012500		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1325000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			>;
+		};
+
+		omap3_pmx_core2: pinmux@480025a0 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025a0 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		isp: isp@480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x0600>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x2f0>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		bandgap: bandgap@48002524 {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap36xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
+
+		target-module@480cb000 {
+			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sr2_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480cb000 0x001000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap3-smartreflex-core";
+				reg = <0 0x400>;
+				interrupts = <19>;
+			};
+		};
+
+		target-module@480c9000 {
+			compatible = "ti,sysc-omap3630-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sr1_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480c9000 0x001000>;
+
+
+			smartreflex_mpu_iva: smartreflex@480c9000 {
+				compatible = "ti,omap3-smartreflex-mpu-iva";
+				reg = <0 0x400>;
+				interrupts = <18>;
+			};
+		};
+
+		/*
+		 * Note that the sysconfig register layout is a subset of the
+		 * "ti,sysc-omap4" type register with just sidle and midle bits
+		 * available while omap34xx has "ti,sysc-omap2" type sysconfig.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5000fe00 0x4>,
+			      <0x5000fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
+};
+
+&sdma {
+	compatible = "ti,omap3630-sdma", "ti,omap-sdma";
+};
+
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+	clock-names = "fck", "tv_dac_clk";
+};
+
+&ssi {
+	status = "okay";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
new file mode 100644
index 000000000..0656c3243
--- /dev/null
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -0,0 +1,1662 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck@1270 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&scm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x68>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x04>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x04>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x68>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x68>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm_clocks {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck@d48 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck@940 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck@904 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck@e40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck@d40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck@e40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <16>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck@f40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2@d70 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck@924 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck@a40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck@a00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck@e00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck@c40 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick@a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck@c00 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick@c10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck@1040 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick@1010 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck@1140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
new file mode 100644
index 000000000..4b3afe298
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
+	thermal-sensors = <&bandgap     0>;
+
+	cpu_trips: trips {
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cpu_cooling_maps: cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
new file mode 100644
index 000000000..ba5c35b70
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-droid-bionic-xt875.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	model = "Motorola Droid Bionic XT875";
+	compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
new file mode 100644
index 000000000..c0d2fd92a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+	model = "Motorola Droid 4 XT894";
+	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
new file mode 100644
index 000000000..b294c2217
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "OMAP4430 Gumstix Duovero on Parlor";
+	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "duovero:blue:led0";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-0 = <
+			&led_pins
+			&button_pins
+			&smsc_pins
+	>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	smsc_pins: pinmux_smsc_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
+			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
+			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
+
+		phy-mode = "mii";
+
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <50>;
+		gpmc,cs-wr-off-ns = <50>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <50>;
+		gpmc,we-on-ns = <15>;
+		gpmc,we-off-ns = <50>;
+		gpmc,rd-cycle-ns = <50>;
+		gpmc,wr-cycle-ns = <50>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <35>;
+		gpmc,cycle2cycle-delay-ns = <35>;
+		gpmc,wr-data-mux-bus-ns = <35>;
+		gpmc,wr-access-ns = <50>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,sync-clk-ps = <20000>;
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
new file mode 100644
index 000000000..805dfd400
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ */
+
+#include "omap443x.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	model = "Gumstix Duovero";
+	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "DuoVero";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
+		#phy-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1phy_pins>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for w2cbw0015 on sdio5 */
+	w2cbw0015_vmmc: w2cbw0015_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w2cbw0015_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "w2cbw0015";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
+		>;
+	};
+
+	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
+		>;
+	};
+};
+
+/* PMIC */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+	status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	vmmc-supply = <&w2cbw0015_vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
new file mode 100644
index 000000000..31d856b58
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-kc1.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Paul Kocialkowski <contact@paulk.fr>
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Amazon Kindle Fire (first generation)";
+	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		green {
+			label = "green";
+			pwms = <&twl_pwm 0 7812500>;
+			max-brightness = <127>;
+		};
+
+		orange {
+			label = "orange";
+			pwms = <&twl_pwm 1 7812500>;
+			max-brightness = <127>;
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat0 */
+			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat1 */
+			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat2 */
+			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat3 */
+			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat4 */
+			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat5 */
+			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat6 */
+			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_dat7 */
+			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_clk */
+			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)	/* sdmmc2_cmd */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x194, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* usba0_otg_ce */
+			OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dp */
+			OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* usba0_otg_dm */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+
+		twl_power: power {
+			compatible = "ti,twl6030-power";
+			ti,system-power-controller;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&vaux1>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
new file mode 100644
index 000000000..a9573d441
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -0,0 +1,495 @@
+&l4_abe {						/* 0x40100000 */
+	compatible = "ti,omap4-l4-abe", "simple-pm-bus";
+	reg = <0x40100000 0x400>,
+	      <0x40100400 0x400>;
+	reg-names = "la", "ap";
+	power-domains = <&prm_abe>;
+	/* OMAP4_L4_ABE_CLKCTRL is read-only */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
+		 <0x49000000 0x49000000 0x100000>;
+	segment@0 {					/* 0x40100000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges =
+			 /* CPU to L4 ABE mapping */
+			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
+			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
+			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
+			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
+			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
+			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
+			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
+
+			 /* L3 to L4 ABE mapping */
+			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
+			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
+			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
+			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
+			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
+			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
+			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
+			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
+			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
+			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
+			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
+			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
+			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
+			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
+			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
+			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
+			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
+			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
+			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
+			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
+			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
+			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
+			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
+			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
+			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
+			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
+			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
+			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
+			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
+			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
+			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
+			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
+			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
+			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
+
+		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2208c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>,
+				 <0x49022000 0x49022000 0x1000>;
+
+			mcbsp1: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49022000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 33>,
+				       <&sdma 34>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2408c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>,
+				 <0x49024000 0x49024000 0x1000>;
+
+			mcbsp2: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49024000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 17>,
+				       <&sdma 18>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCBSP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>,
+				 <0x49026000 0x49026000 0x1000>;
+
+			mcbsp3: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49026000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 19>,
+				       <&sdma 20>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+			compatible = "ti,sysc-mcasp", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>;
+
+			/*
+			 * Child device unsupported by davinci-mcasp. At least
+			 * RX path is disabled for omap4, and only DIT mode
+			 * works with no I2S. See also old Android kernel
+			 * omap-mcasp driver for more information.
+			 */
+		};
+
+		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>,
+				 <0x4902a000 0x4902a000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_DMIC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>,
+				 <0x4902e000 0x4902e000 0x1000>;
+
+			dmic: dmic@0 {
+				compatible = "ti,omap4-dmic";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x4902e000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 67>;
+				dma-names = "up_link";
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30010 0x4>,
+			      <0x30014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>,
+				 <0x49030000 0x49030000 0x1000>;
+
+			wdt3: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_MCPDM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>,
+				 <0x49032000 0x49032000 0x1000>;
+
+			/* Must be only enabled for boards with pdmclk wired */
+			status = "disabled";
+
+			mcpdm: mcpdm@0 {
+				compatible = "ti,omap4-mcpdm";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x49032000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 65>,
+				       <&sdma 66>;
+				dma-names = "up_link", "dn_link";
+			};
+		};
+
+		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>,
+				 <0x49038000 0x49038000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x49038000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>,
+				 <0x4903a000 0x4903a000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903a000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>,
+				 <0x4903c000 0x4903c000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903c000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>,
+				 <0x4903e000 0x4903e000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x00000000 0x80>,
+				      <0x4903e000 0x80>;
+				clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>,
+				 <0x49080000 0x49080000 0x10000>;
+		};
+
+		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>,
+				 <0x490a0000 0x490a0000 0x10000>;
+		};
+
+		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x10000>,
+				 <0x490c0000 0x490c0000 0x10000>;
+		};
+
+		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf1000 0x1000>,
+				 <0x490f1000 0x490f1000 0x1000>;
+
+			/*
+			 * No child device binding or driver in mainline.
+			 * See Android tree and related upstreaming efforts
+			 * for the old driver.
+			 */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
new file mode 100644
index 000000000..5015df4d8
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -0,0 +1,2477 @@
+// SPDX-License-Identifier: GPL-2.0
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,omap4-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
+		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
+		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
+		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
+		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
+		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
+		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
+			 <0x00058000 0x00058000 0x004000>,	/* ap 10 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 23 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 24 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 25 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 26 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 80 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 81 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 86 */
+			 <0x00065000 0x00065000 0x001000>;	/* ap 87 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_core";
+			reg = <0x2000 0x4>,
+			      <0x2010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			omap4_scm_core: scm@0 {
+				compatible = "ti,omap4-scm-core", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
+
+				omap_control_usb2phy: control-phy@300 {
+					compatible = "ti,control-phy-usb2";
+					reg = <0x300 0x4>;
+					reg-names = "power";
+				};
+
+				omap_control_usbotg: control-phy@33c {
+					compatible = "ti,control-phy-otghs";
+					reg = <0x33c 0x4>;
+					reg-names = "otghs_control";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x4a004000, ap 5 02.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			cm1: cm1@0 {
+				compatible = "ti,omap4-cm1", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm1_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm1_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 23 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm2: cm2@0 {
+				compatible = "ti,omap4-cm2", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm2_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm2_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
+			clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000 0x4>,
+			      <0x58010 0x4>,
+			      <0x58014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x5000>;
+
+			hsi: hsi@0 {
+				compatible = "ti,omap4-hsi";
+				reg = <0x0 0x4000>,
+				      <0x5000 0x1000>;
+				reg-names = "sys", "gdd";
+
+				clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+				clock-names = "hsi_fck";
+
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gdd_mpu";
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x4000>;
+
+				hsi_port1: hsi-port@2000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x2000 0x800>,
+					      <0x2800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				hsi_port2: hsi-port@3000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x3000 0x800>,
+					      <0x3800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 80 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@62000 {			/* 0x4a062000, ap 11 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>,
+			      <0x62014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			usbhstll: usbhstll@0 {
+				compatible = "ti,usbhs-tll";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@64000 {			/* 0x4a064000, ap 86 1e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>,
+			      <0x64014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			usbhshost: usbhshost@0 {
+				compatible = "ti,usbhs-host";
+				reg = <0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				clocks = <&init_60m_fclk>,
+					 <&xclk60mhsp1_ck>,
+					 <&xclk60mhsp2_ck>;
+				clock-names = "refclk_60m_int",
+					      "refclk_60m_ext_p1",
+					      "refclk_60m_ext_p2";
+
+				usbhsohci: ohci@800 {
+					compatible = "ti,ohci-omap3";
+					reg = <0x800 0x400>;
+					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+					remote-wakeup-connected;
+				};
+
+				usbhsehci: ehci@c00 {
+					compatible = "ti,ehci-omap";
+					reg = <0xc00 0x400>;
+					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66000 0x4>,
+			      <0x66010 0x4>,
+			      <0x66014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
+			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_tesla 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
+		};
+	};
+
+	segment@80000 {					/* 0x4a080000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
+			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
+			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
+			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
+			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
+			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
+			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
+			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
+			 <0x00074000 0x000f4000 0x001000>,	/* ap 27 */
+			 <0x00075000 0x000f5000 0x001000>,	/* ap 28 */
+			 <0x00076000 0x000f6000 0x001000>,	/* ap 29 */
+			 <0x00077000 0x000f7000 0x001000>,	/* ap 30 */
+			 <0x00036000 0x000b6000 0x001000>,	/* ap 69 */
+			 <0x00037000 0x000b7000 0x001000>,	/* ap 70 */
+			 <0x0004d000 0x000cd000 0x001000>,	/* ap 78 */
+			 <0x0004e000 0x000ce000 0x001000>,	/* ap 79 */
+			 <0x00029000 0x000a9000 0x001000>,	/* ap 82 */
+			 <0x0002a000 0x000aa000 0x001000>,	/* ap 83 */
+			 <0x0002b000 0x000ab000 0x001000>,	/* ap 84 */
+			 <0x0002c000 0x000ac000 0x001000>,	/* ap 85 */
+			 <0x0002d000 0x000ad000 0x001000>,	/* ap 88 */
+			 <0x0002e000 0x000ae000 0x001000>;	/* ap 89 */
+
+		target-module@29000 {			/* 0x4a0a9000, ap 82 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x29000 0x1000>;
+		};
+
+		target-module@2b000 {			/* 0x4a0ab000, ap 84 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2b400 0x4>,
+			      <0x2b404 0x4>,
+			      <0x2b408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2b000 0x1000>;
+
+			usb_otg_hs: usb_otg_hs@0 {
+				compatible = "ti,omap4-musb";
+				reg = <0x0 0x7ff>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mc", "dma";
+				usb-phy = <&usb2_phy>;
+				phys = <&usb2_phy>;
+				phy-names = "usb2-phy";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+				ctrl-module = <&omap_control_usbotg>;
+			};
+		};
+
+		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2d000 0x4>,
+			      <0x2d010 0x4>,
+			      <0x2d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2d000 0x1000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				reg = <0x0 0x1f>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				usb2_phy: usb2phy@80 {
+					compatible = "ti,omap-usb2";
+					reg = <0x80 0x58>;
+					ctrl-module = <&omap_control_usb2phy>;
+					clocks = <&usb_phy_cm_clk32k>;
+					clock-names = "wkupclk";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		/* d2d mdm */
+		target-module@36000 {			/* 0x4a0b6000, ap 69 60.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>,
+			      <0x36014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		/* d2d mpu */
+		target-module@4d000 {			/* 0x4a0cd000, ap 78 58.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4d000 0x4>,
+			      <0x4d010 0x4>,
+			      <0x4d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, d2d_clkdm */
+			clocks = <&d2d_clkctrl OMAP4_C2C_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x59038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			smartreflex_mpu: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-mpu";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x5b038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			smartreflex_iva: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-iva";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0x5d038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-core";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@60000 {			/* 0x4a0e0000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@74000 {			/* 0x4a0f4000, ap 27 24.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				mbox_ipu: mbox-ipu {
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <1 0 0>;
+				};
+				mbox_dsp: mbox-dsp {
+					ti,mbox-tx = <3 0 0>;
+					ti,mbox-rx = <2 0 0>;
+				};
+			};
+		};
+
+		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>,
+			      <0x76014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
+			 <0x00001000 0x00101000 0x001000>,	/* ap 22 */
+			 <0x00002000 0x00102000 0x001000>,	/* ap 61 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 62 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 63 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 64 */
+			 <0x0000a000 0x0010a000 0x001000>,	/* ap 65 */
+			 <0x0000b000 0x0010b000 0x001000>;	/* ap 66 */
+
+		target-module@0 {			/* 0x4a100000, ap 21 2a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_core";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			omap4_pmx_core: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0196>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap4_padconf_global: omap4_padconf_global@5a0 {
+				compatible = "syscon",
+					     "simple-bus";
+				reg = <0x5a0 0x170>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x5a0 0x170>;
+
+				pbias_regulator: pbias_regulator@60 {
+					compatible = "ti,pbias-omap4", "ti,pbias-omap";
+					reg = <0x60 0x4>;
+					syscon = <&omap4_padconf_global>;
+					pbias_mmc_reg: pbias_mmc_omap4 {
+						regulator-name = "pbias_mmc_omap4";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3000000>;
+					};
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x4a102000, ap 61 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 63 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>,
+			      <0xa010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-delay-us = <2>;
+			/* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
+			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+	};
+
+	segment@180000 {					/* 0x4a180000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 32 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 33 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 34 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 37 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 38 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 39 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 40 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 41 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 42 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 43 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 44 */
+			 <0x00016000 0x00216000 0x001000>,	/* ap 45 */
+			 <0x00017000 0x00217000 0x001000>,	/* ap 46 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 47 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 48 */
+			 <0x00018000 0x00218000 0x001000>,	/* ap 49 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 50 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 51 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 52 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 53 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 54 */
+			 <0x00028000 0x00228000 0x001000>,	/* ap 55 */
+			 <0x00029000 0x00229000 0x001000>,	/* ap 56 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 57 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 58 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 59 */
+			 <0x0001d000 0x0021d000 0x001000>;	/* ap 60 */
+
+		target-module@4000 {			/* 0x4a204000, ap 35 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a206000, ap 37 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 33 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 41 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 43 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 39 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 47 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x4a216000, ap 45 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 49 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 59 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 31 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 51 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 53 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x4a228000, ap 55 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 57 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+	};
+
+	segment@280000 {					/* 0x4a280000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+			 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+			 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+			 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+			 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+			 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+			 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+			 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+			 <0x0002c000 0x0032c000 0x004000>;	/* ap 91 */
+
+		l4_cfg_target_0: target-module@0 {	/* 0x4a300000, ap 67 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00020000>,
+				 <0x00020000 0x00020000 0x00004000>,
+				 <0x00024000 0x00024000 0x00002000>,
+				 <0x00026000 0x00026000 0x00001000>,
+				 <0x00027000 0x00027000 0x00001000>,
+				 <0x00028000 0x00028000 0x00001000>,
+				 <0x00029000 0x00029000 0x00001000>,
+				 <0x0002a000 0x0002a000 0x00002000>,
+				 <0x0002c000 0x0002c000 0x00004000>,
+				 <0x00030000 0x00030000 0x00010000>;
+		};
+	};
+};
+
+&l4_wkup {						/* 0x4a300000 */
+	compatible = "ti,omap4-l4-wkup", "simple-bus";
+	reg = <0x4a300000 0x800>,
+	      <0x4a300800 0x800>,
+	      <0x4a301000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a300000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4a310000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
+
+		target-module@4000 {			/* 0x4a304000, ap 17 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x20>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4a306000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,omap4-prm", "simple-bus";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4a30a000, ap 15 34.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			scrm: scrm@0 {
+				compatible = "ti,omap4-scrm";
+				reg = <0x0 0x2000>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				scrm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4a30c000, ap 19 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_wkup";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			omap4_scm_wkup: scm@c000 {
+				compatible = "ti,omap4-scm-wkup";
+				reg = <0xc000 0x1000>;
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4a310000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>,	/* ap 12 */
+			 <0x0000e000 0x0001e000 0x001000>,	/* ap 21 */
+			 <0x0000f000 0x0001f000 0x001000>;	/* ap 22 */
+
+		gpio1_target: target-module@0 {			/* 0x4a310000, ap 5 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				ti,gpio-always-on;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4a314000, ap 7 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer1_target: target-module@8000 {	/* 0x4a318000, ap 9 1c.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>,
+			      <0x8014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>,
+			      <0xc014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			keypad: keypad@0 {
+				compatible = "ti,omap4-keypad";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				reg-names = "mpu";
+			};
+		};
+
+		target-module@e000 {			/* 0x4a31e000, ap 21 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_wkup";
+			reg = <0xe000 0x4>,
+			      <0xe010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			omap4_pmx_wkup: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+		};
+	};
+
+	segment@20000 {					/* 0x4a320000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 23 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 24 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 25 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 26 */
+			 <0x00004000 0x00024000 0x001000>,	/* ap 27 */
+			 <0x00005000 0x00025000 0x001000>,	/* ap 28 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 29 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 30 */
+			 <0x00009000 0x00029000 0x000400>;	/* ap 31 */
+
+		target-module@0 {			/* 0x4a320000, ap 23 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@2000 {			/* 0x4a322000, ap 25 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@4000 {			/* 0x4a324000, ap 27 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a326000, ap 13 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00003000 0x00009000 0x00000400>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,omap4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00040000 0x00040000 0x010000>,	/* ap 13 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 14 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 15 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 16 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 17 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 18 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 19 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 20 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 21 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 22 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 23 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 24 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 25 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 26 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 27 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 28 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 29 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 30 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 31 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 32 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 33 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 34 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 35 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 36 */
+			 <0x00096000 0x00096000 0x001000>,	/* ap 37 */
+			 <0x00097000 0x00097000 0x001000>,	/* ap 38 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 39 */
+			 <0x00077000 0x00077000 0x001000>,	/* ap 40 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 41 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 42 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 43 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 44 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 45 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 46 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 47 */
+			 <0x000b1000 0x000b1000 0x001000>,	/* ap 48 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 49 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 50 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 51 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 52 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 53 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 54 */
+			 <0x0009e000 0x0009e000 0x001000>,	/* ap 55 */
+			 <0x0009f000 0x0009f000 0x001000>,	/* ap 56 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 57 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 58 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 59 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 60 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 61 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 62 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 63 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 64 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 65 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 66 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 67 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 68 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 69 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 70 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 71 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 72 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 73 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 74 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 75 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 76 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 79 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 80 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 81 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 82 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 83 */
+			 <0x000a5000 0x000a5000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>,
+			      <0x32014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		/* Unused DSS L4 access, see L3 instead */
+		target-module@40000 {			/* 0x48040000, ap 13 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+
+		target-module@55000 {			/* 0x48055000, ap 15 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@57000 {			/* 0x48057000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 19 10.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 21 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 23 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 25 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 26 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 28 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 30 1c.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 32 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 34 30.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78010 0x4>,
+			      <0x78014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>,
+			      <0x86014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x96000 0x1000>;
+
+			mcbsp4: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>; /* L4 Interconnect */
+				reg-names = "mpu";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 31>,
+				       <&sdma 32>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 49 22.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma 35>,
+				       <&sdma 36>,
+				       <&sdma 37>,
+				       <&sdma 38>,
+				       <&sdma 39>,
+				       <&sdma 40>,
+				       <&sdma 41>,
+				       <&sdma 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 51 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 43>,
+				       <&sdma 44>,
+				       <&sdma 45>,
+				       <&sdma 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 53 36.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				ti,dual-volt;
+				ti,needs-special-reset;
+				dmas = <&sdma 61>, <&sdma 62>;
+				dma-names = "tx", "rx";
+				pbias-supply = <&pbias_mmc_reg>;
+			};
+		};
+
+		target-module@9e000 {			/* 0x4809e000, ap 55 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9e000 0x1000>;
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 79 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 59 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 63 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 77>, <&sdma 78>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b0000 {			/* 0x480b0000, ap 47 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x1000>;
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 65 3c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb2000 0x4>,
+			      <0xb2014 0x4>,
+			      <0xb2018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			ti,no-reset-on-init;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+
+			hdqw1w: 1w@0 {
+				compatible = "ti,omap3-1w";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 67 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 47>, <&sdma 48>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 69 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 15>, <&sdma 16>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 71 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma 70>, <&sdma 71>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 73 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 57>, <&sdma 58>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 75 4e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd5000 0x4>,
+			      <0xd5010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+
+			mmc5: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 59>, <&sdma 60>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
+			 <0x00151000 0x00351000 0x001000>;	/* ap 78 */
+
+		target-module@150000 {			/* 0x48350000, ap 77 4c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x150000 0x8>,
+			      <0x150010 0x8>,
+			      <0x150090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x150000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap4-mcpdm.dtsi b/arch/arm/boot/dts/omap4-mcpdm.dtsi
new file mode 100644
index 000000000..915a9b31a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-mcpdm.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common omap4 mcpdm configuration
+ *
+ * Only include this file if your board has pdmclk wired from the
+ * pmic to ABE as mcpdm uses an external clock for the module.
+ */
+
+&omap4_pmx_core {
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */
+		OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */
+		OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */
+		OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)
+
+		/* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */
+		OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+
+		/* 0x4a10010e abe_clks.abe_clks ah26 */
+		OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&mcpdm_module {
+	/*
+	 * McPDM pads must be muxed at the interconnect target module
+	 * level as the module on the SoC needs external clock from
+	 * the PMIC
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
new file mode 100644
index 000000000..8fd076e5d
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
new file mode 100644
index 000000000..609a8dea9
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/input/input.h>
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@98000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x98000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu_memory_region: ipu-memory@98800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x98800000 0x7000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+		ethernet = &ethernet;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&led_wkgpio_pins
+		>;
+
+		heartbeat {
+			label = "pandaboard::status1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "pandaboard::status2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&button_pins
+		>;
+
+		buttonS2 {
+			label = "button S2";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "PandaBoard";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		/*
+		 * boot-on is required along with always-on as the
+		 * regulator framework doesn't enable the regulator
+		 * if boot-on is not there.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
+		#phy-cells = <0>;
+		vcc-supply = <&hsusb1_power>;
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder1 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_dpi_pins
+			&tfp410_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* IRQ# = 119 */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x10e>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		/* gpio_53 with gpmc_ncs3 pad as wakeup */
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
+				      <&omap4_pmx_core 0x3a>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dsp {
+	status = "okay";
+	memory-region = <&dsp_memory_region>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+	status = "okay";
+	memory-region = <&ipu_memory_region>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
new file mode 100644
index 000000000..6afa8fd7c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard-ES";
+	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+	ti,model = "PandaBoardES";
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"AFML", "Line In",
+		"AFMR", "Line In";
+};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
+
+&omap4_pmx_core {
+	led_gpio_pins: gpio_led_pmx {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+		>;
+	};
+};
+
+&led_wkgpio_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+	>;
+};
+
+&leds {
+	pinctrl-0 = <
+		&led_gpio_pins
+		&led_wkgpio_pins
+	>;
+
+	heartbeat {
+		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+	};
+	mmc {
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio_keys {
+	buttonS2 {
+		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
+	};
+};
+
+&gpio1_target {
+	 ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 000000000..529d5bcce
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
new file mode 100644
index 000000000..869f6279b
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 000000000..afb49a2d6
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
+	vdd_eth: fixedregulator-vdd-eth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&enet_enable_gpio>;
+
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+		startup-delay-us = <25000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3750000>;
+		regulator-max-microvolt = <3750000>;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug0 {
+			label = "omap4:green:debug0";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
+		};
+
+		debug1 {
+			label = "omap4:green:debug1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
+		};
+
+		debug2 {
+			label = "omap4:green:debug2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
+		};
+
+		debug3 {
+			label = "omap4:green:debug3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
+		};
+
+		debug4 {
+			label = "omap4:green:debug4";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+		};
+
+		user1 {
+			label = "omap4:blue:user";
+			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+		};
+
+		user2 {
+			label = "omap4:red:user";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+		};
+
+		user3 {
+			label = "omap4:green:user";
+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		kpad {
+			label = "omap4::keypad";
+			pwms = <&twl_pwm 0 7812500>;
+			max-brightness = <127>;
+		};
+
+		charging {
+			label = "omap4:green:chrg";
+			pwms = <&twl_pwmled 0 7812500>;
+			max-brightness = <255>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&twl_pwm 1 7812500>;
+		brightness-levels = <
+				0 10 20 30 40
+				50 60 70 80 90
+				100 110 120 127
+				>;
+		default-brightness-level = <13>;
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "SDP4430";
+
+		ti,jack-detection = <1>;
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+		ti,dmic = <&dmic>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Earphone Spk", "EP",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"Vibrator", "VIBRAL",
+			"Vibrator", "VIBRAR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"MAINMIC", "Main Handset Mic",
+			"Main Handset Mic", "Main Mic Bias",
+			"SUBMIC", "Sub Handset Mic",
+			"Sub Handset Mic", "Main Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In",
+			"DMic", "Digital Mic",
+			"Digital Mic", "Digital Mic1 Bias";
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_hdmi_pins
+			&tpd12s015_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+		>;
+	};
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	/* gpio_48 for ENET_ENABLE */
+	enet_enable_gpio: pinmux_enet_enable_gpio {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+		>;
+	};
+
+	ks8851_pins: pinmux_ks8851_pins {
+		pinctrl-single,pins = <
+			/* ENET_INT */
+			OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ad10.gpio_34 */
+			/*
+			 * Misterious pin which makes the ethernet working
+			 * The legacy board file requested this pin on boot
+			 * (ETH_KS8851_QUART) and set it to high, similarly to
+			 * the ENET_ENABLE pin.
+			 * We could use gpio-hog to keep it high, but let's use
+			 * it as a reset GPIO for ks8851.
+			 */
+			OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.gpio_138 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+
+		/* regulators for vibra motor */
+		vddvibl-supply = <&vbat>;
+		vddvibr-supply = <&vbat>;
+
+		vibra {
+			/* Vibra driver, motor resistance parameters */
+			ti,vibldrv-res = <8>;
+			ti,vibrdrv-res = <3>;
+			ti,viblmotor-res = <10>;
+			ti,vibrmotor-res = <10>;
+		};
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * https://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	eth@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_pins>;
+
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1281";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&dmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&dss {
+	status = "okay";
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: panel@0 {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts
new file mode 100644
index 000000000..84fd17fb0
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-DVK-OM44";
+	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	lcd0: display {
+		compatible = "innolux,at070tn83", "panel-dpi";
+		label = "lcd";
+		panel-timing {
+			clock-frequency = <33333333>;
+
+			hback-porch = <40>;
+			hactive = <800>;
+			hfront-porch = <40>;
+			hsync-len = <48>;
+
+			vback-porch = <29>;
+			vactive = <480>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+
+		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
new file mode 100644
index 000000000..458cb53dd
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+
+		led0 {
+			label = "var:green:led0";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "var:green:led1";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-key@184 {
+			label = "user";
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
+			linux,code = <BTN_EXTRA>;
+			wakeup-source;
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins>;
+		label = "hdmi";
+		type = "a";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
+			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
+			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcasp_pins: pinmux_mcsasp_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
+			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
+		>;
+	};
+
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
+		>;
+	};
+
+	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
+		>;
+	};
+
+	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+	status = "okay";
+
+	eth@0 {
+		compatible = "ks8851";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_irq_pins>;
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
+	};
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+	vmmc-supply = <&vbat>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
new file mode 100644
index 000000000..d00322131
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+
+/ {
+	/* regulator for wl12xx on sdio4 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_ctrl_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;	/* gpio 43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
+			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
+		>;
+	};
+
+	mmc4_pins: pinmux_mmc4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
+			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
+			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
+			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
+			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
+			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&mmc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc4_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+		ref-clock-frequency = <38400000>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
new file mode 100644
index 000000000..334cbbaa5
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com
+ */
+#include "omap4460.dtsi"
+#include "omap4-mcpdm.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-OM44";
+	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "VAR-SOM-OM44";
+
+		ti,mclk-freq = <38400000>;
+		ti,mcpdm = <&mcpdm>;
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&hsusbb1_phy_clk_pins
+			&hsusbb1_phy_rst_pins
+		>;
+
+		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
+		vcc-supply = <&vbat>;
+		#phy-cells = <0>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
+			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_hub_rst_pins
+		&lan7500_rst_pins
+	>;
+
+	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
+		>;
+	};
+
+	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
+		>;
+	};
+
+	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&vusim {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
+		status = "disabled";
+	};
+
+	tmp105@49 {
+		compatible = "ti,tmp105";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c32", "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&gpmc {
+	status = "disabled";
+};
+
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&keypad {
+	status = "disabled";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts
new file mode 100644
index 000000000..656fb29c2
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-STK-OM44";
+	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 000000000..049174086
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,705 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/omap4.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap4.h>
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		rproc0 = &dsp;
+		rproc1 = &ipu;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	/*
+	 * Note that 4430 needs cross trigger interface (CTI) supported
+	 * before we can configure the interrupts. This means sampling
+	 * events are not supported for pmu. Note that 4460 does not use
+	 * CTI, see also 4460.dtsi.
+	 */
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		ti,hwmods = "debugss";
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+		interrupt-parent = <&gic>;
+	};
+
+	L2: cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	local-timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		clocks = <&mpu_periphclk>;
+		reg = <0x48240600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48281000 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0x44000000 0x1000>,
+		      <0x44800000 0x2000>,
+		      <0x45000000 0x1000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: interconnect@4a300000 {
+		};
+
+		l4_cfg: interconnect@4a000000 {
+		};
+
+		l4_per: interconnect@48000000 {
+		};
+
+		l4_abe: interconnect@40100000 {
+		};
+
+		ocmcram: sram@40304000 {
+			compatible = "mmio-sram";
+			reg = <0x40304000 0xa000>; /* 40k */
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		target-module@52000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "iss";
+			reg = <0x52000000 0x4>,
+			      <0x52000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-delay-us = <2>;
+			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x52000000 0x1000000>;
+
+			/* No child device binding, driver in staging */
+		};
+
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		target-module@4012c000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4012c000 0x4>,
+			      <0x4012c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
+				 <0x4902c000 0x4902c000 0x1000>; /* L3 */
+
+			/* No child device binding or driver in mainline */
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap4-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4c000000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4d000000 0x100>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		dsp: dsp {
+			compatible = "ti,omap4-dsp";
+			ti,bootreg = <&scm_conf 0x304 0>;
+			iommus = <&mmu_dsp>;
+			resets = <&prm_tesla 0>;
+			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+			firmware-name = "omap4-dsp-fw.xe64T";
+			mboxes = <&mailbox &mbox_dsp>;
+			status = "disabled";
+		};
+
+		ipu: ipu@55020000 {
+			compatible = "ti,omap4-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu>;
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			firmware-name = "omap4-ipu-fw.xem3";
+			mboxes = <&mailbox &mbox_ipu>;
+			status = "disabled";
+		};
+
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		abb_iva: regulator-abb-iva {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80000000>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		sgx_module: target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
+		/*
+		 * DSS is only using l3 mapping without l4 as noted in the TRM
+		 * "10.1.3 DSS Register Manual" for omap4460.
+		 */
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
+				 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x58000000 0x1000000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap4-dss";
+				reg = <0 0x80>;
+				status = "disabled";
+				clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,omap4-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "fck", "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
+
+					rfbi: encoder@0  {
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
+						clock-names = "fck", "ick";
+					};
+				};
+
+				target-module@3000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x3000 0x4>;
+					reg-names = "rev";
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+					clock-names = "sys_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x3000 0x1000>;
+
+					venc: encoder@0 {
+						compatible = "ti,omap4-venc";
+						reg = <0 0x1000>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@4000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x4000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+							 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				target-module@5000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x5000 0x4>,
+					      <0x5010 0x4>,
+					      <0x5014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap4-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x20>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				target-module@6000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x6000 0x4>,
+					      <0x6010 0x4>;
+					reg-names = "rev", "sysc";
+					/*
+					 * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
+					 * but HDMI audio will fail with them.
+					 */
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x6000 0x2000>;
+
+					hdmi: encoder@0 {
+					compatible = "ti,omap4-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x100>,
+						      <0x300 0x100>,
+						      <0x400 0x1000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
+						         <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
+			};
+		};
+	};
+};
+
+#include "omap4-l4.dtsi"
+#include "omap4-l4-abe.dtsi"
+#include "omap44xx-clocks.dtsi"
+
+&prm {
+	prm_tesla: prm@400 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_abe: prm@500 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x500 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_ivahd: prm@f00 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@1b00 {
+		compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b00 0x40>;
+		#reset-cells = <1>;
+	};
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+		assigned-clock-parents = <&sys_32k_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
new file mode 100644
index 000000000..39297868e
--- /dev/null
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	bandgap_fclk: bandgap_fclk@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
new file mode 100644
index 000000000..cce39dce1
--- /dev/null
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Device Tree Source for OMAP443x SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		cpu0: cpu@0 {
+			/* OMAP443x variants OPP50-OPPNT */
+			operating-points = <
+				/* kHz    uV */
+				300000  1025000
+				600000  1200000
+				800000  1313000
+				1008000 1375000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		/* 4430 has only gpio_86 tshut and no talert interrupt */
+		bandgap: bandgap@4a002260 {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4>;
+			compatible = "ti,omap4430-bandgap";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+			reg-names = "base-address", "int-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		/* Default unused, just provide register info for record */
+		abb_iva: regulator-abb-iva {
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+			reg-names = "base-address", "int-address";
+		};
+
+	};
+
+};
+
+&cpu_thermal {
+	thermal-sensors = <&bandgap>;
+	coefficients = <0 20000>;
+};
+
+/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
new file mode 100644
index 000000000..d62e2bacc
--- /dev/null
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				350000  1025000
+				700000  1200000
+				920000  1313000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "debugss";
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap@4a002260 {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4
+			       0x4a002378 0x18>;
+			compatible = "ti,omap4460-bandgap";
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
+
+			#thermal-sensor-cells = <0>;
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
+
+};
+
+&cpu_thermal {
+	thermal-sensors = <&bandgap>;
+	coefficients = <348 (-9301)>;
+};
+
+/* Only some L4 CFG interconnect ranges are different on 4460 */
+&l4_cfg_segment_300000 {
+	ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+		 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+		 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+		 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+		 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+		 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+		 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+		 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+		 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+		 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+		 <0x0002c000 0x0032c000 0x004000>,	/* ap 91 */
+		 <0x00010000 0x00310000 0x008000>,	/* ap 92 */
+		 <0x00018000 0x00318000 0x004000>,	/* ap 93 */
+		 <0x0001c000 0x0031c000 0x002000>,	/* ap 94 */
+		 <0x0001e000 0x0031e000 0x002000>;	/* ap 95 */
+};
+
+&l4_cfg_target_0 {
+	ranges = <0x00000000 0x00000000 0x00010000>,
+		 <0x00010000 0x00010000 0x00008000>,
+		 <0x00018000 0x00018000 0x00004000>,
+		 <0x0001c000 0x0001c000 0x00002000>,
+		 <0x0001e000 0x0001e000 0x00002000>,
+		 <0x00020000 0x00020000 0x00004000>,
+		 <0x00024000 0x00024000 0x00002000>,
+		 <0x00026000 0x00026000 0x00001000>,
+		 <0x00027000 0x00027000 0x00001000>,
+		 <0x00028000 0x00028000 0x00001000>,
+		 <0x00029000 0x00029000 0x00001000>,
+		 <0x0002a000 0x0002a000 0x00002000>,
+		 <0x0002c000 0x0002c000 0x00004000>,
+		 <0x00030000 0x00030000 0x00010000>;
+};
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
new file mode 100644
index 000000000..0f41714cf
--- /dev/null
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&prm_clocks {
+	div_ts_ck: div_ts_ck@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
new file mode 100644
index 000000000..1f1c04d8f
--- /dev/null
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm1_clocks {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk@1dc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk@19c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <931200000>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m4x2_ck>;
+		assigned-clock-rates = <465600000>;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m5x2_ck>;
+		assigned-clock-rates = <266100000>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&prm_clocks {
+	sys_clkin_ck: sys_clkin_ck@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	usim_ck: usim_ck@1858 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk@1858 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
+	};
+};
+
+&prm_clockdomains {
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+
+&cm2_clocks {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+};
+
+&cm2_clockdomains {
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck@324 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck@214 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck@218 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck@220 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck@224 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
+
+&cm1 {
+	mpuss_cm: mpuss_cm@300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpuss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	tesla_cm: tesla_cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		tesla_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	abe_cm: abe_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		abe_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x6c>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&cm2 {
+	l4_ao_cm: l4_ao_cm@600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		l4_ao_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_1_cm: l3_1_cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3_1_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_2_cm: l3_2_cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l3_2_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ducati_cm: ducati_cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ducati_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_dma_cm: l3_dma_cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		l3_dma_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_emif_cm: l3_emif_cm@b00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		l3_emif_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	d2d_cm: d2d_cm@c00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xc00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xc00 0x100>;
+
+		d2d_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_cfg_cm: l4_cfg_cm@d00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4_cfg_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_instr_cm: l3_instr_cm@e00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3_instr_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x24>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ivahd_cm: ivahd_cm@f00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xf00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xf00 0x100>;
+
+		ivahd_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	iss_cm: iss_cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		iss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_dss_cm: l3_dss_cm@1100 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1100 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1100 0x100>;
+
+		l3_dss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_gfx_cm: l3_gfx_cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		l3_gfx_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3_init_cm: l3_init_cm@1300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1300 0x100>;
+
+		l3_init_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_per_cm: l4_per_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x200>;
+
+		l4_per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+			reg = <0x20 0x144>;
+			#clock-cells = <2>;
+		};
+
+		l4_secure_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&prm {
+	l4_wkup_cm: l4_wkup_cm@1800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1800 0x100>;
+
+		l4_wkup_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emu_sys_cm: emu_sys_cm@1a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1a00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1a00 0x100>;
+
+		emu_sys_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
new file mode 100644
index 000000000..3a8f10231
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vsys_cobra: fixedregulator-vsys_cobra {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_cobra";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	mmc3_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clk32kgaudio>;
+		clock-names = "ext_clock";
+	};
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
+		enable-active-high;
+		startup-delay-us = <70000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+		#phy-cells = <0>;
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		/* gpios defined in the board specific dts */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,jack-detection;
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+		>;
+	};
+
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+
+	wlcore_irq_pin: pinmux_wlcore_irq_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
+		gpadc: gpadc {
+			compatible = "ti,palmas-gpadc";
+			interrupts = <18 0
+				      16 0
+				      17 0>;
+			#io-channel-cells = <1>;
+			ti,channel0-current-microamp = <5>;
+			ti,channel3-current-microamp = <10>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-names = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			smps123-in-supply = <&vsys_cobra>;
+			smps45-in-supply = <&vsys_cobra>;
+			smps6-in-supply = <&vsys_cobra>;
+			smps7-in-supply = <&vsys_cobra>;
+			smps8-in-supply = <&vsys_cobra>;
+			smps9-in-supply = <&vsys_cobra>;
+			smps10_out2-in-supply = <&vsys_cobra>;
+			smps10_out1-in-supply = <&vsys_cobra>;
+			ldo1-in-supply = <&vsys_cobra>;
+			ldo2-in-supply = <&vsys_cobra>;
+			ldo3-in-supply = <&vdds_1v8_main>;
+			ldo4-in-supply = <&vdds_1v8_main>;
+			ldo5-in-supply = <&vsys_cobra>;
+			ldo6-in-supply = <&vdds_1v8_main>;
+			ldo7-in-supply = <&vsys_cobra>;
+			ldo8-in-supply = <&vsys_cobra>;
+			ldo9-in-supply = <&vmmcsd_fixed>;
+			ldoln-in-supply = <&vsys_cobra>;
+			ldousb-in-supply = <&vsys_cobra>;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdds_1v8_main:
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		#clock-cells = <0>;
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
+
+		/* audpwron gpio defined in the board specific dts */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>, <&fref_xtal_ck>;
+		clock-names = "clk32k", "mclk";
+	};
+};
+
+&mcpdm_module {
+	/* Module on the SoC needs external clock from the PMIC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&dwc3 {
+	extcon = <&extcon_usb3>;
+	dr_mode = "otg";
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+
+	/* vdda-supply populated in board specific dts file */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
new file mode 100644
index 000000000..af288d63a
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -0,0 +1,697 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for CompuLab CM-T54
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "CompuLab CM-T54";
+	compatible = "compulab,omap5-cm-t54", "ti,omap5";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
+	};
+
+	aliases {
+		display0 = &hdmi0;
+		display1 = &dvi0;
+		display2 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixed-regulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_pdn_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ldo2_reg>;
+		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	vwlan_fixed: fixed-regulator-vwlan {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vwlan_pdn_fixed>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+		#phy-cells = <0>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+		#phy-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "Heartbeat";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
+
+	hdmi0: connector0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_conn_pins>;
+
+		hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	tfp410: encoder0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_dvi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector1 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c2>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&omap5_pmx_wkup {
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
+		>;
+	};
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&led_gpio_pins
+			&usbhost_pins
+	>;
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
+			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+			OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
+			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
+			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
+			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
+			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
+			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
+			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
+			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
+			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
+			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
+			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
+			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
+			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
+			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_gpios_pins: pinmux_wlan_gpios_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
+			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
+			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x013c, PIN_INPUT | MUX_MODE0) /* hdmi_cec */
+			OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
+			OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
+			OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
+			OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
+			OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
+			OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
+			OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
+			OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
+			OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
+			OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
+			OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
+			OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
+			OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
+			OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
+			OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
+			OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
+			OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
+			OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
+			OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
+			OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
+			OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
+			OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
+			OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
+			OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
+			OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
+			OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
+			OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
+			OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
+			OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+			OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+			OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
+			OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
+		>;
+	};
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 0>;			/* gpio1_wk15 */
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc3_pins
+		&wlan_gpios_pins
+	>;
+	vmmc-supply = <&vwlan_fixed>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		reg = <0x48>;
+		pinctrl-0 = <&palmas_sys_nirq_pins>;
+		pinctrl-names = "default";
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-names = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					ti,smps-range = <0x80>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_3V3_WLAN */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					startup-delay-us = <1000>;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VCC_1V5_AUD */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3V_GP: act led/serial console */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpi_dvi_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+
+		dpi_lcd_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&ldo4_reg>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
new file mode 100644
index 000000000..02e76338b
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC CORE thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+core_thermal: core_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     2>;
+
+	trips {
+		core_crit: core_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
new file mode 100644
index 000000000..bf8fa9372
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     1>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
new file mode 100644
index 000000000..76e499d89
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap5-board-common.dtsi"
+
+/ {
+	model = "IGEPv5";
+	compatible = "isee,omap5-igep0050", "ti,omap5";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x7f000000>;	/* 2032 MB */
+	};
+
+	aliases {
+		ethernet = &ethernet;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "board:green:usr0";
+			gpios = <&tca6416 1 0>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "board:red:usr1";
+			gpios = <&tca6416 2 0>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "board:blue:usr1";
+			gpios = <&tca6416 3 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo7_reg>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	tca6416: tca6416@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+	regulator-min-microvolt = <2000000>;
+	regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+	status = "okay";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
+			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
+};
+
+&tpd12s015 {
+	gpios = <&tca6416 11 0>,	/* TCA6416 P01, CT_CP_HDP */
+		<&tca6416 12 0>,	/* TCA6416 P00, LS_OE*/
+		<&gpio7 1 0>,		/* 193, HPD */
+		<&gpio7 2 0>,		/* 194, SCL */
+		<&gpio7 3 0>;		/* 195, SDA */
+};
+
+&twl6040 {
+	ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>;  /* gpio line 144 */
+};
+
+&twl6040_pins {
+	pinctrl-single,pins = <
+		OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_144 */
+		OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+	>;
+};
+
+&usbhsehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: usbether@3 {
+			compatible = "usb424,7500";
+			reg = <3>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
new file mode 100644
index 000000000..a03bca5a3
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -0,0 +1,456 @@
+&l4_abe {						/* 0x40100000 */
+	compatible = "ti,omap5-l4-abe", "simple-pm-bus";
+	reg = <0x40100000 0x400>,
+	      <0x40100400 0x400>;
+	reg-names = "la", "ap";
+	power-domains = <&prm_abe>;
+	/* OMAP5_L4_ABE_CLKCTRL is read-only */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x40100000 0x100000>,	/* segment 0 */
+		 <0x49000000 0x49000000 0x100000>;
+	segment@0 {					/* 0x40100000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges =
+			 /* CPU to L4 ABE mapping */
+			 <0x00000000 0x00000000 0x000400>,	/* ap 0 */
+			 <0x00000400 0x00000400 0x000400>,	/* ap 1 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 2 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 3 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 4 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 5 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 6 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 7 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 8 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 9 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 10 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 11 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 12 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 13 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 14 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 15 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 16 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 17 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 18 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 19 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 20 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 21 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 22 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 23 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 24 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 25 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 26 */
+			 <0x00080000 0x00080000 0x001000>,	/* ap 27 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 28 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 29 */
+			 <0x000c0000 0x000c0000 0x010000>,	/* ap 30 */
+			 <0x000c0000 0x000c0000 0x001000>,	/* ap 31 */
+			 <0x000f1000 0x000f1000 0x001000>,	/* ap 32 */
+			 <0x000f2000 0x000f2000 0x001000>,	/* ap 33 */
+
+			 /* L3 to L4 ABE mapping */
+			 <0x49000000 0x49000000 0x000400>,	/* ap 0 */
+			 <0x49000400 0x49000400 0x000400>,	/* ap 1 */
+			 <0x49022000 0x49022000 0x001000>,	/* ap 2 */
+			 <0x49023000 0x49023000 0x001000>,	/* ap 3 */
+			 <0x49024000 0x49024000 0x001000>,	/* ap 4 */
+			 <0x49025000 0x49025000 0x001000>,	/* ap 5 */
+			 <0x49026000 0x49026000 0x001000>,	/* ap 6 */
+			 <0x49027000 0x49027000 0x001000>,	/* ap 7 */
+			 <0x49028000 0x49028000 0x001000>,	/* ap 8 */
+			 <0x49029000 0x49029000 0x001000>,	/* ap 9 */
+			 <0x4902a000 0x4902a000 0x001000>,	/* ap 10 */
+			 <0x4902b000 0x4902b000 0x001000>,	/* ap 11 */
+			 <0x4902e000 0x4902e000 0x001000>,	/* ap 12 */
+			 <0x4902f000 0x4902f000 0x001000>,	/* ap 13 */
+			 <0x49030000 0x49030000 0x001000>,	/* ap 14 */
+			 <0x49031000 0x49031000 0x001000>,	/* ap 15 */
+			 <0x49032000 0x49032000 0x001000>,	/* ap 16 */
+			 <0x49033000 0x49033000 0x001000>,	/* ap 17 */
+			 <0x49038000 0x49038000 0x001000>,	/* ap 18 */
+			 <0x49039000 0x49039000 0x001000>,	/* ap 19 */
+			 <0x4903a000 0x4903a000 0x001000>,	/* ap 20 */
+			 <0x4903b000 0x4903b000 0x001000>,	/* ap 21 */
+			 <0x4903c000 0x4903c000 0x001000>,	/* ap 22 */
+			 <0x4903d000 0x4903d000 0x001000>,	/* ap 23 */
+			 <0x4903e000 0x4903e000 0x001000>,	/* ap 24 */
+			 <0x4903f000 0x4903f000 0x001000>,	/* ap 25 */
+			 <0x49080000 0x49080000 0x010000>,	/* ap 26 */
+			 <0x49080000 0x49080000 0x001000>,	/* ap 27 */
+			 <0x490a0000 0x490a0000 0x010000>,	/* ap 28 */
+			 <0x490a0000 0x490a0000 0x001000>,	/* ap 29 */
+			 <0x490c0000 0x490c0000 0x010000>,	/* ap 30 */
+			 <0x490c0000 0x490c0000 0x001000>,	/* ap 31 */
+			 <0x490f1000 0x490f1000 0x001000>,	/* ap 32 */
+			 <0x490f2000 0x490f2000 0x001000>;	/* ap 33 */
+
+		target-module@22000 {			/* 0x40122000, ap 2 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2208c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>,
+				 <0x49022000 0x49022000 0x1000>;
+
+			mcbsp1: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49022000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 33>,
+				       <&sdma 34>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x40124000, ap 4 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2408c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>,
+				 <0x49024000 0x49024000 0x1000>;
+
+			mcbsp2: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49024000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 17>,
+				       <&sdma 18>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x40126000, ap 6 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCBSP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>,
+				 <0x49026000 0x49026000 0x1000>;
+
+			mcbsp3: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>, /* MPU private access */
+				      <0x49026000 0xff>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 19>,
+				       <&sdma 20>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>,
+				 <0x4902a000 0x4902a000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_DMIC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>,
+				 <0x4902e000 0x4902e000 0x1000>;
+
+			dmic: dmic@0 {
+				compatible = "ti,omap4-dmic";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x4902e000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 67>;
+				dma-names = "up_link";
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x40130000, ap 14 0e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>,
+				 <0x49030000 0x49030000 0x1000>;
+		};
+
+		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_MCPDM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>,
+				 <0x49032000 0x49032000 0x1000>;
+
+			/* Must be only enabled for boards with pdmclk wired */
+			status = "disabled";
+
+			mcpdm: mcpdm@0 {
+				compatible = "ti,omap4-mcpdm";
+				reg = <0x0 0x7f>, /* MPU private access */
+				      <0x49032000 0x7f>; /* L3 Interconnect */
+				reg-names = "mpu", "dma";
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 65>,
+				       <&sdma 66>;
+				dma-names = "up_link", "dn_link";
+			};
+		};
+
+		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>,
+				 <0x49038000 0x49038000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x49038000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>,
+				 <0x4903a000 0x4903a000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903a000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>,
+				 <0x4903c000 0x4903c000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903c000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>,
+				 <0x4903e000 0x4903e000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>,
+				      <0x4903e000 0x80>;
+				clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-dsp;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@80000 {			/* 0x40180000, ap 26 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>,
+				 <0x49080000 0x49080000 0x10000>;
+		};
+
+		target-module@a0000 {			/* 0x401a0000, ap 28 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>,
+				 <0x490a0000 0x490a0000 0x10000>;
+		};
+
+		target-module@c0000 {			/* 0x401c0000, ap 30 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x10000>,
+				 <0x490c0000 0x490c0000 0x10000>;
+		};
+
+		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf1000 0x4>,
+			      <0xf1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf1000 0x1000>,
+				 <0x490f1000 0x490f1000 0x1000>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
new file mode 100644
index 000000000..c67c8698c
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -0,0 +1,2471 @@
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,omap5-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
+		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
+		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
+		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
+		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
+		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
+		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 10 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 21 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 22 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 23 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 24 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 69 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 70 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 71 */
+			 <0x00065000 0x00065000 0x001000>,	/* ap 72 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 77 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 78 */
+			 <0x00070000 0x00070000 0x004000>,	/* ap 79 */
+			 <0x00074000 0x00074000 0x001000>,	/* ap 80 */
+			 <0x00075000 0x00075000 0x001000>,	/* ap 81 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 82 */
+			 <0x00020000 0x00020000 0x020000>,	/* ap 109 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 110 */
+			 <0x00059000 0x00059000 0x001000>;	/* ap 111 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			scm_core: scm@0 {
+				compatible = "ti,omap5-scm-core", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x800>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
+			};
+
+			scm_padconf_core: scm@800 {
+				compatible = "ti,omap5-scm-padconf-core",
+					     "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x800 0x800>;
+
+				omap5_pmx_core: pinmux@40 {
+					compatible = "ti,omap5-padconf",
+						     "pinctrl-single";
+					reg = <0x40 0x01b6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <16>;
+					pinctrl-single,function-mask = <0x7fff>;
+				};
+
+				omap5_padconf_global: omap5_padconf_global@5a0 {
+					compatible = "syscon",
+						     "simple-bus";
+					reg = <0x5a0 0xec>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x5a0 0xec>;
+
+					pbias_regulator: pbias_regulator@60 {
+						compatible = "ti,pbias-omap5", "ti,pbias-omap";
+						reg = <0x60 0x4>;
+						syscon = <&omap5_padconf_global>;
+						pbias_mmc_reg: pbias_mmc_omap5 {
+							regulator-name = "pbias_mmc_omap5";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+						};
+					};
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x4a004000, ap 5 5c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			cm_core_aon: cm_core_aon@0 {
+				compatible = "ti,omap5-cm-core-aon",
+					     "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+
+				cm_core_aon_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_aon_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 21 4c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm_core: cm_core@0 {
+				compatible = "ti,omap5-cm-core", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm_core_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@20000 {			/* 0x4a020000, ap 109 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x20000>;
+
+			usb3: omap_dwc3@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+				dwc3: dwc3@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy>, <&usb3_phy>;
+					phy-names = "usb2-phy", "usb3-phy";
+					dr_mode = "peripheral";
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 7 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
+			clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@58000 {			/* 0x4a058000, ap 10 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00058000 0x00001000>,
+				 <0x00001000 0x00059000 0x00001000>,
+				 <0x00002000 0x0005a000 0x00001000>,
+				 <0x00003000 0x0005b000 0x00001000>;
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 69 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@62000 {			/* 0x4a062000, ap 11 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>,
+			      <0x62014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			usbhstll: usbhstll@0 {
+				compatible = "ti,usbhs-tll";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@64000 {			/* 0x4a064000, ap 71 1e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			usbhshost: usbhshost@0 {
+				compatible = "ti,usbhs-host";
+				reg = <0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				clocks = <&l3init_60m_fclk>,
+					 <&xclk60mhsp1_ck>,
+					 <&xclk60mhsp2_ck>;
+				clock-names = "refclk_60m_int",
+					      "refclk_60m_ext_p1",
+					      "refclk_60m_ext_p2";
+
+				usbhsohci: ohci@800 {
+					compatible = "ti,ohci-omap3";
+					reg = <0x800 0x400>;
+					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+					remote-wakeup-connected;
+				};
+
+				usbhsehci: ehci@c00 {
+					compatible = "ti,ehci-omap";
+					reg = <0xc00 0x400>;
+					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@66000 {			/* 0x4a066000, ap 23 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66000 0x4>,
+			      <0x66010 0x4>,
+			      <0x66014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
+			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
+		};
+
+		target-module@70000 {			/* 0x4a070000, ap 79 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x4000>;
+		};
+
+		target-module@75000 {			/* 0x4a075000, ap 81 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x75000 0x1000>;
+		};
+	};
+
+	segment@80000 {					/* 0x4a080000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
+			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
+			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
+			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
+			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
+			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
+			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
+			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
+			 <0x00074000 0x000f4000 0x001000>,	/* ap 25 */
+			 <0x00075000 0x000f5000 0x001000>,	/* ap 26 */
+			 <0x00076000 0x000f6000 0x001000>,	/* ap 27 */
+			 <0x00077000 0x000f7000 0x001000>,	/* ap 28 */
+			 <0x00036000 0x000b6000 0x001000>,	/* ap 65 */
+			 <0x00037000 0x000b7000 0x001000>,	/* ap 66 */
+			 <0x0004d000 0x000cd000 0x001000>,	/* ap 67 */
+			 <0x0004e000 0x000ce000 0x001000>,	/* ap 68 */
+			 <0x00000000 0x00080000 0x004000>,	/* ap 83 */
+			 <0x00004000 0x00084000 0x001000>,	/* ap 84 */
+			 <0x00005000 0x00085000 0x001000>,	/* ap 85 */
+			 <0x00006000 0x00086000 0x001000>,	/* ap 86 */
+			 <0x00007000 0x00087000 0x001000>,	/* ap 87 */
+			 <0x00008000 0x00088000 0x001000>,	/* ap 88 */
+			 <0x00010000 0x00090000 0x004000>,	/* ap 89 */
+			 <0x00014000 0x00094000 0x001000>,	/* ap 90 */
+			 <0x00015000 0x00095000 0x001000>,	/* ap 91 */
+			 <0x00016000 0x00096000 0x001000>,	/* ap 92 */
+			 <0x00017000 0x00097000 0x001000>,	/* ap 93 */
+			 <0x00018000 0x00098000 0x001000>,	/* ap 94 */
+			 <0x00020000 0x000a0000 0x004000>,	/* ap 95 */
+			 <0x00024000 0x000a4000 0x001000>,	/* ap 96 */
+			 <0x00025000 0x000a5000 0x001000>,	/* ap 97 */
+			 <0x00026000 0x000a6000 0x001000>,	/* ap 98 */
+			 <0x00027000 0x000a7000 0x001000>,	/* ap 99 */
+			 <0x00028000 0x000a8000 0x001000>;	/* ap 100 */
+
+		target-module@0 {			/* 0x4a080000, ap 83 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x14 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00004000>,
+				 <0x00004000 0x00004000 0x00001000>,
+				 <0x00005000 0x00005000 0x00001000>,
+				 <0x00006000 0x00006000 0x00001000>,
+				 <0x00007000 0x00007000 0x00001000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x20>;
+			};
+
+			usb2_phy: usb2phy@4000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4000 0x7c>;
+				syscon-phy-power = <&scm_conf 0x300>;
+				clocks = <&usb_phy_cm_clk32k>,
+				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy: usb3phy@4400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4400 0x80>,
+				<0x4800 0x64>,
+				<0x4c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				syscon-phy-power = <&scm_conf 0x370>;
+				clocks = <&usb_phy_cm_clk32k>,
+				<&sys_clkin>,
+				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
+				clock-names =	"wkupclk",
+				"sysclk",
+				"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		target-module@10000 {			/* 0x4a090000, ap 89 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x10000 0x4>,
+			      <0x10010 0x4>,
+			      <0x10014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00010000 0x00004000>,
+				 <0x00004000 0x00014000 0x00001000>,
+				 <0x00005000 0x00015000 0x00001000>,
+				 <0x00006000 0x00016000 0x00001000>,
+				 <0x00007000 0x00017000 0x00001000>;
+
+				ocp2scp@0 {
+					compatible = "ti,omap-ocp2scp";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					reg = <0x0 0x20>;
+				};
+
+				sata_phy: phy@6000 {
+					compatible = "ti,phy-pipe3-sata";
+					reg = <0x6000 0x80>, /* phy_rx */
+					      <0x6400 0x64>, /* phy_tx */
+					      <0x6800 0x40>; /* pll_ctrl */
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x374>;
+					clocks = <&sys_clkin>,
+						 <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+					clock-names = "sysclk", "refclk";
+					#phy-cells = <0>;
+				};
+		};
+
+		target-module@20000 {			/* 0x4a0a0000, ap 95 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00020000 0x00004000>,
+				 <0x00004000 0x00024000 0x00001000>,
+				 <0x00005000 0x00025000 0x00001000>,
+				 <0x00006000 0x00026000 0x00001000>,
+				 <0x00007000 0x00027000 0x00001000>;
+		};
+
+		target-module@36000 {			/* 0x4a0b6000, ap 65 6c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@4d000 {			/* 0x4a0cd000, ap 67 64.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a0d9000, ap 13 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+		};
+
+		target-module@5b000 {			/* 0x4a0db000, ap 15 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4a0dd000, ap 17 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@60000 {			/* 0x4a0e0000, ap 19 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@74000 {			/* 0x4a0f4000, ap 25 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				mbox_ipu: mbox-ipu {
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <1 0 0>;
+				};
+				mbox_dsp: mbox-dsp {
+					ti,mbox-tx = <3 0 0>;
+					ti,mbox-rx = <2 0 0>;
+				};
+			};
+		};
+
+		target-module@76000 {			/* 0x4a0f6000, ap 27 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>,
+			      <0x76014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 59 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 60 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 61 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 62 */
+			 <0x0000a000 0x0010a000 0x001000>,	/* ap 63 */
+			 <0x0000b000 0x0010b000 0x001000>,	/* ap 64 */
+			 <0x00040000 0x00140000 0x010000>,	/* ap 101 */
+			 <0x00050000 0x00150000 0x001000>;	/* ap 102 */
+
+		target-module@2000 {			/* 0x4a102000, ap 59 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 61 26.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a10a000, ap 63 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x4a140000, ap 101 16.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+	};
+
+	segment@180000 {					/* 0x4a180000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 29 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 30 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 31 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 32 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 33 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 34 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 37 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 38 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 39 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 40 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 41 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 42 */
+			 <0x00016000 0x00216000 0x001000>,	/* ap 43 */
+			 <0x00017000 0x00217000 0x001000>,	/* ap 44 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 45 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 46 */
+			 <0x00018000 0x00218000 0x001000>,	/* ap 47 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 48 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 49 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 50 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 51 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 52 */
+			 <0x00028000 0x00228000 0x001000>,	/* ap 53 */
+			 <0x00029000 0x00229000 0x001000>,	/* ap 54 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 55 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 56 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 57 */
+			 <0x0001d000 0x0021d000 0x001000>,	/* ap 58 */
+			 <0x0001a000 0x0021a000 0x001000>,	/* ap 73 */
+			 <0x0001b000 0x0021b000 0x001000>,	/* ap 74 */
+			 <0x00024000 0x00224000 0x001000>,	/* ap 75 */
+			 <0x00025000 0x00225000 0x001000>,	/* ap 76 */
+			 <0x00002000 0x00202000 0x001000>,	/* ap 103 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 104 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 105 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 106 */
+			 <0x00022000 0x00222000 0x001000>,	/* ap 107 */
+			 <0x00023000 0x00223000 0x001000>;	/* ap 108 */
+
+		target-module@2000 {			/* 0x4a202000, ap 103 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@4000 {			/* 0x4a204000, ap 35 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a206000, ap 33 4e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a208000, ap 105 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 31 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 39 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 41 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 37 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 45 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x4a216000, ap 43 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 47 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x4a21a000, ap 73 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 57 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 29 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 49 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x4a222000, ap 107 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x4a224000, ap 75 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 51 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x4a228000, ap 53 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 55 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+	};
+
+	segment@280000 {					/* 0x4a280000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@300000 {					/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,omap5-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
+			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
+			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
+			 <0x000a5000 0x000a5000 0x001000>,
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
+			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
+			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
+			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
+			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@51000 {			/* 0x48051000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x51000 0x4>,
+			      <0x51010 0x4>,
+			      <0x51114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+
+			gpio7: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53000 0x4>,
+			      <0x53010 0x4>,
+			      <0x53114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+
+			gpio8: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
+				 <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 23 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@66000 {			/* 0x48066000, ap 63 4c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66050 0x4>,
+			      <0x66054 0x4>,
+			      <0x66058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@68000 {			/* 0x48068000, ap 53 54.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x68050 0x4>,
+			      <0x68054 0x4>,
+			      <0x68058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x1000>;
+
+			uart6: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 24 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 26 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 28 44.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 30 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 32 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 39 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+		};
+
+		target-module@7a000 {			/* 0x4807a000, ap 81 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7a000 0x8>,
+			      <0x7a010 0x8>,
+			      <0x7a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7a000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@7c000 {			/* 0x4807c000, ap 83 34.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7c000 0x8>,
+			      <0x7c010 0x8>,
+			      <0x7c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x1000>;
+
+			i2c5: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma 35>,
+				       <&sdma 36>,
+				       <&sdma 37>,
+				       <&sdma 38>,
+				       <&sdma 39>,
+				       <&sdma 40>,
+				       <&sdma 41>,
+				       <&sdma 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 43>,
+				       <&sdma 44>,
+				       <&sdma 45>,
+				       <&sdma 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 51 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				ti,dual-volt;
+				ti,needs-special-reset;
+				dmas = <&sdma 61>, <&sdma 62>;
+				dma-names = "tx", "rx";
+				pbias-supply = <&pbias_mmc_reg>;
+			};
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 57 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+			status = "disabled";
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 59 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 77>, <&sdma 78>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 37 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 65 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 47>, <&sdma 48>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 67 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 15>, <&sdma 16>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma 70>, <&sdma 71>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 57>, <&sdma 58>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd5000 0x4>,
+			      <0xd5010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+
+			mmc5: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 59>, <&sdma 60>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_wkup {						/* 0x4ae00000 */
+	compatible = "ti,omap5-l4-wkup", "simple-bus";
+	reg = <0x4ae00000 0x800>,
+	      <0x4ae00800 0x800>,
+	      <0x4ae01000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4ae20000 0x010000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4ae00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
+
+		target-module@4000 {			/* 0x4ae04000, ap 17 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4ae06000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,omap5-prm", "simple-bus";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4ae0a000, ap 15 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			scrm: scrm@0 {
+				compatible = "ti,omap5-scrm";
+				reg = <0x0 0x1000>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				scrm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae0c000, ap 19 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			omap5_pmx_wkup: pinmux@840 {
+				compatible = "ti,omap5-padconf",
+					     "pinctrl-single";
+				reg = <0x840 0x003c>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
+				compatible = "ti,omap5-scm-wkup-pad-conf",
+					     "simple-bus";
+				reg = <0xda0 0x60>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x60>;
+
+				scm_wkup_pad_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x60>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x0 0x60>;
+
+					scm_wkup_pad_conf_clocks: clocks@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4ae10000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
+
+		target-module@0 {			/* 0x4ae10000, ap 5 10.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
+				 <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				ti,gpio-always-on;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4ae14000, ap 7 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap5-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer1_target: target-module@8000 {	/* 0x4ae18000, ap 9 18.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae1c000, ap 11 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			keypad: keypad@0 {
+				compatible = "ti,omap4-keypad";
+				reg = <0x0 0x400>;
+			};
+		};
+	};
+
+	segment@20000 {					/* 0x4ae20000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 21 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 22 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 23 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 24 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 25 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 26 */
+			 <0x00009000 0x00029000 0x000100>,	/* ap 27 */
+			 <0x00008800 0x00028800 0x000200>,	/* ap 28 */
+			 <0x00008a00 0x00028a00 0x000100>;	/* ap 29 */
+
+		target-module@0 {			/* 0x4ae20000, ap 21 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@2000 {			/* 0x4ae22000, ap 23 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4ae26000, ap 13 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00002800 0x00008800 0x00000200>,
+				 <0x00002a00 0x00008a00 0x00000100>,
+				 <0x00003000 0x00009000 0x00000100>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts
new file mode 100644
index 000000000..657df4625
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-sbc-t54.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Suppport for CompuLab CM-T54 on SB-T54 baseboard
+ */
+
+#include "omap5-cm-t54.dts"
+
+/ {
+	model = "CompuLab CM-T54 on SB-T54";
+	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+		>;
+	};
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
+			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+	cd-inverted;
+	wp-inverted;
+	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
+	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
new file mode 100644
index 000000000..51d5fcae5
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+	model = "TI OMAP5 uEVM board";
+	compatible = "ti,omap5-uevm", "ti,omap5";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@95000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95000000 0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu_memory_region: ipu-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95800000 0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	aliases {
+		ethernet = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	evm_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&evm_keys_pins>;
+
+		#address-cells = <7>;
+		#size-cells = <0>;
+
+		btn1 {
+			label = "BTN1";
+			linux,code = <169>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
+			wakeup-source;
+			autorepeat;
+			debounce-interval = <50>;
+		};
+	};
+
+	evm_leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "omap5:red:led";
+			gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "omap5:green:led";
+			gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "omap5:blue:led";
+			gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "omap5:green:led1";
+			gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "omap5:green:led2";
+			gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led6 {
+			label = "omap5:green:led3";
+			gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led7 {
+			label = "omap5:green:led4";
+			gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+			default-state = "off";
+		};
+
+		led8 {
+			label = "omap5:green:led5";
+			gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo4_reg>;
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+
+	clock-frequency = <400000>;
+
+	gpio9: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
+};
+
+&omap5_pmx_core {
+	evm_keys_pins: pinmux_evm_keys_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6)	/* gpio3_83 */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
+		>;
+	};
+};
+
+&tpd12s015 {
+	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
+};
+
+&twl6040 {
+	ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
+};
+
+&twl6040_pins {
+	pinctrl-single,pins = <
+		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+	>;
+};
+
+&usbhsehci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	ethernet: usbether@3 {
+		compatible = "usb424,9730";
+		reg = <3>;
+	};
+};
+
+&wlcore {
+	compatible = "ti,wl1837";
+};
+
+&dsp {
+	status = "okay";
+	memory-region = <&dsp_memory_region>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+	status = "okay";
+	memory-region = <&ipu_memory_region>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
new file mode 100644
index 000000000..530210db2
--- /dev/null
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/clock/omap5.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "ti,omap5";
+	interrupt-parent = <&wakeupgen>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		rproc0 = &dsp;
+		rproc1 = &ipu;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		/* PPI secure/nonsecure IRQ */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0 0x48211000 0 0x1000>,
+		      <0 0x48212000 0 0x2000>,
+		      <0 0x48214000 0 0x2000>,
+		      <0 0x48216000 0 0x2000>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0 0x48281000 0 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap5-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0 0x44000000 0 0x2000>,
+		      <0 0x44800000 0 0x3000>,
+		      <0 0x45000000 0 0x4000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: interconnect@4ae00000 {
+		};
+
+		l4_cfg: interconnect@4a000000 {
+		};
+
+		l4_per: interconnect@48000000 {
+		};
+
+		l4_abe: interconnect@40100000 {
+		};
+
+		ocmcram: sram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x20000>; /* 128k */
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
+		};
+
+		dsp: dsp {
+			compatible = "ti,omap5-dsp";
+			ti,bootreg = <&scm_conf 0x304 0>;
+			iommus = <&mmu_dsp>;
+			resets = <&prm_dsp 0>;
+			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+			firmware-name = "omap5-dsp-fw.xe64T";
+			mboxes = <&mailbox &mbox_dsp>;
+			status = "disabled";
+		};
+
+		ipu: ipu@55020000 {
+			compatible = "ti,omap5-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu>;
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			firmware-name = "omap5-ipu-fw.xem4";
+			mboxes = <&mailbox &mbox_ipu>;
+			status = "disabled";
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
+		};
+
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+			       0x4a00232c 0xc
+			       0x4a002380 0x2c
+			       0x4a0023C0 0x3c>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			compatible = "ti,omap5430-bandgap";
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		/* OCP2SCP3 */
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
+		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
+
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x58000000 0x1000000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap5-dss";
+				reg = <0 0x80>;
+				status = "disabled";
+				clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,omap5-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+					};
+				};
+
+				target-module@2000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x2000 0x4>,
+					      <0x2010 0x4>,
+					      <0x2014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x2000 0x1000>;
+
+					rfbi: encoder@0  {
+						compatible = "ti,omap5-rfbi";
+						reg = <0 0x100>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>;
+						clock-names = "fck", "ick";
+					};
+				};
+
+				target-module@4000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x4000 0x4>,
+					      <0x4010 0x4>,
+					      <0x4014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x4000 0x1000>;
+
+					dsi1: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@9000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x9000 0x4>,
+					      <0x9010 0x4>,
+					      <0x9014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x9000 0x1000>;
+
+					dsi2: encoder@0 {
+						compatible = "ti,omap5-dsi";
+						reg = <0 0x200>,
+						      <0x200 0x40>,
+						      <0x300 0x40>;
+						reg-names = "proto", "phy", "pll";
+						interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+					};
+				};
+
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,omap5-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma 76>;
+						dma-names = "audio_tx";
+					};
+				};
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1250000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_mm: regulator-abb-mm {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mm";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80000000>;
+			/* LDOVBBMM_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMM_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1025000		0	0x0	0 0x02000000 0x01F00000
+			1120000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+	};
+};
+
+&cpu_thermal {
+	polling-delay = <500>; /* milliseconds */
+	coefficients = <65 (-1791)>;
+};
+
+#include "omap5-l4.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&gpu_thermal {
+	coefficients = <117 (-2992)>;
+};
+
+&core_thermal {
+	coefficients = <0 2000>;
+};
+
+#include "omap5-l4-abe.dtsi"
+#include "omap54xx-clocks.dtsi"
+
+&prm {
+	prm_dsp: prm@400 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_abe: prm@500 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x500 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_iva: prm@1200 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1200 0x100>;
+		#reset-cells = <1>;
+	};
+
+	prm_device: prm@1c00 {
+		compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c00 0x100>;
+		#reset-cells = <1>;
+	};
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
+		assigned-clock-parents = <&sys_32k_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
new file mode 100644
index 000000000..42f2c4477
--- /dev/null
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -0,0 +1,1208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ */
+&cm_core_aon_clocks {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck@1e0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk@108 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck@120 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck@1a0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <1165000000>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		assigned-clocks = <&dpll_iva_h11x2_ck>;
+		assigned-clock-rates = <465920000>;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		assigned-clocks = <&dpll_iva_h12x2_ck>;
+		assigned-clock-rates = <388300000>;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck@160 {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div@100 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <8>;
+		reg = <0x100>;
+		clocks = <&l3_iclk_div>;
+		ti,index-power-of-two;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk@528 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk@540 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin: sys_clkin@110 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_core_clocks {
+
+	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck@140 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck@200 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck@180 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk@104 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk@1320 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk@f20 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	fdif_fclk: fdif_fclk@1328 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk@1638 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+};
+
+&cm_core_clockdomains {
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck@310 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck@314 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck@318 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck@31c {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck@320 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck@210 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck@214 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck@218 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck@21c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
+
+&cm_core_aon {
+	mpu_cm: mpu_cm@300 {
+		compatible = "ti,omap4-cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dsp_cm: dsp_cm@400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		dsp_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	abe_cm: abe_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		abe_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x64>;
+			#clock-cells = <2>;
+		};
+	};
+
+};
+
+&cm_core {
+	l3main1_cm: l3main1_cm@700 {
+		compatible = "ti,omap4-cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3main1_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3main2_cm: l3main2_cm@800 {
+		compatible = "ti,omap4-cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l3main2_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	ipu_cm: ipu_cm@900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ipu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dma_cm: dma_cm@a00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		dma_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emif_cm: emif_cm@b00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		emif_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4cfg_cm: l4cfg_cm@d00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4cfg_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3instr_cm: l3instr_cm@e00 {
+		compatible = "ti,omap4-cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3instr_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4per_cm: l4per_cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x200>;
+
+		l4per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
+			reg = <0x20 0x15c>;
+			#clock-cells = <2>;
+		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dss_cm: dss_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x100>;
+
+		dss_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gpu_cm: gpu_cm@1500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1500 0x100>;
+
+		gpu_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3init_cm: l3init_cm@1600 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1600 0x100>;
+
+		l3init_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0xd4>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&prm {
+	wkupaon_cm: wkupaon_cm@1900 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1900 0x100>;
+
+		wkupaon_clkctrl: clk@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+};
+
+&scm_wkup_pad_conf_clocks {
+	fref_xtal_ck: fref_xtal_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <28>;
+		reg = <0x14>;
+	};
+};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
new file mode 100644
index 000000000..05101a38c
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x5600000>; // 86MB
+		label = "rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x6000000 0x2000000>; // 32MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
new file mode 100644
index 000000000..6c26524e9
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "u-boot-env";
+	};
+
+	kernel@80000 {
+		reg = <0x80000 0x440000>;
+		label = "kernel";
+	};
+
+	rofs@c0000 {
+		reg = <0x4c0000 0x1740000>;
+		label = "rofs";
+	};
+
+	rwfs@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
new file mode 100644
index 000000000..e28b568e7
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-kuroboxpro.dts
@@ -0,0 +1,127 @@
+/*
+ * Device Tree file for Buffalo/Revogear Kurobox Pro
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo/Revogear Kurobox Pro";
+	compatible = "buffalo,kurobox-pro", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>,
+				 <MBUS_ID(0x01, 0x1e) 0 0xfc000000 0x1000000>;
+	};
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_cs0 {
+	status = "okay";
+	compatible = "marvell,orion-nand";
+	reg = <MBUS_ID(0x01, 0x1e) 0 0x400>;
+	cle = <0>;
+	ale = <1>;
+	bank-width = <1>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uImage@0 { /* 4 MB */
+			reg = <0 0x400000>;
+			read-only;
+		};
+
+		rootfs@400000 { /* 64 MB */
+			reg = <0x400000 0x4000000>;
+			read-only;
+		};
+
+		extra@4400000 { /* 188 MB */
+			reg = <0x4400000 0xBC00000>;
+			read-only;
+		};
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
new file mode 100644
index 000000000..422958d13
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie d2 Network";
+	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		front_button {
+			label = "Front Push Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_on {
+			label = "Power rocker switch (on|auto)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_off {
+			label = "Power rocker switch (auto|off)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372b";
+		reg = <0x32>;
+	};
+
+	fan@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+
+		/* Not enough HW info */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+	pinctrl-names = "default";
+
+	pmx_board_id: pmx-board-id {
+		marvell,pins = "mpp0", "mpp1", "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp8", "mpp9", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_fail: pmx-fan-fail {
+		marvell,pins = "mpp5";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP6: Red front LED
+	 * MPP16: Blue front LED blink control
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp6", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
new file mode 100644
index 000000000..0043e0040
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie Ethernet Disk mini V2";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_power_button>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power-on Switch";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "power:blue";
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_ctrl: pmx-power-led-ctrl {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
new file mode 100644
index 000000000..ee751995c
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
@@ -0,0 +1,171 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-CHLv3
+ *
+ * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ * Copyright (C) 2015-2017
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LiveV3 (LS-CHL)";
+	compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio_keys {
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>;
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lschl:func:blue:top";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10", "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_sw_init: pmx-sw-init {
+		marvell,pins = "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
new file mode 100644
index 000000000..9f6fedd39
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
@@ -0,0 +1,91 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-GL
+ *       (also known as Buffalo Linkstation Pro/Live)
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation Pro/Live";
+	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 000000000..7f77ce8cc
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation LS-WTGL";
+	compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 64 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	gpio_keys {
+		power-on-switch {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		blue-power-led {
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		red-alarm-led {
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		amber-info-led {
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+			 &gpio0 17 GPIO_ACTIVE_LOW>;
+
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&sata {
+	nr-ports = <2>;
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
new file mode 100644
index 000000000..b6c9b8595
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts
new file mode 100644
index 000000000..2fbc17d6d
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-lswsgl.dts
@@ -0,0 +1,277 @@
+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation Mini (LS-WSGL)";
+	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "Power-on Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		autopower {
+			label = "Power-auto Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+			     &pmx_led_power>;
+		pinctrl-names = "default";
+
+		alarm {
+			label = "lswsgl:alarm:red";
+			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lswsgl:info:amber";
+			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lswsgl:func:blue:top";
+			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lswsgl:power:blue:bottom";
+			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full256Kb";
+			reg = <0 0x40000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&pinctrl {
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp17", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_power: pmx-usb-power {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 000000000..0ca6208a2
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Maxtor Shared Storage II";
+	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_misc>;
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP0: Power LED
+	 * MPP1: Error LED
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP4: HDD ind. (Single/Dual)
+	 * MPP5: HD0 5V control
+	 * MPP6: HD0 12V control
+	 * MPP7: HD1 5V control
+	 * MPP8: HD1 12V control
+	 */
+	pmx_misc: pmx-misc {
+		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
new file mode 100644
index 000000000..f667012b2
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5181-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5181-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_ge: pmx-ge {
+		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
+			       "mpp12", "mpp13", "mpp14", "mpp15",
+			       "mpp16", "mpp17", "mpp18", "mpp19";
+		marvell,function = "ge";
+	};
+};
+
+&eth {
+	pinctrl-0 = <&pmx_ge>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
new file mode 100644
index 000000000..d1ed71c60
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5182-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12", "mpp14";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13", "mpp15";
+					marvell,function = "sata1";
+				};
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5182-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
new file mode 100644
index 000000000..ea081afa4
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "cpu";
+				ethernet = <&ethport>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
new file mode 100644
index 000000000..487324f7c
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Marvell Reference Design 88F5182 NAS";
+	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_debug_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "rd88f5182:cpu";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+	};
+};
+
+&devbus_cs1 {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x1000000>;
+		bank-width = <1>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+		&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	pmx_debug_led: pmx-debug_led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_switch: pmx-reset-switch {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_misc_gpios: pmx-misc-gpios {
+		marvell,pins = "mpp4", "mpp5";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
new file mode 100644
index 000000000..61e631b3f
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell Orion5x SoC";
+	compatible = "marvell,orion5x";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			gpio0: gpio@10100 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0x10100 0x40>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <6>, <7>, <8>, <9>;
+			};
+
+			spi: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				reg = <0x10600 0x28>;
+				status = "disabled";
+			};
+
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <5>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <4>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <4>;
+			};
+
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x08>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			wdt: wdt@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "okay";
+			};
+
+			ehci0: ehci@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
+			xor: dma-controller@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor00 {
+				      interrupts = <30>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				};
+				xor01 {
+				      interrupts = <31>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				      dmacap,memset;
+				};
+			};
+
+			eth: ethernet-controller@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethport: ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <21>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					/* set phy-handle property in board file */
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <22>;
+				status = "disabled";
+
+				/* add phy nodes in board file */
+			};
+
+			sata: sata@80000 {
+				compatible = "marvell,orion-sata";
+				reg = <0x80000 0x5000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			cesa: crypto@90000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <28>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
+			ehci1: ehci@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0xa0000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
new file mode 100644
index 000000000..7c96c59b6
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cubietech CubieBoard6
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard6", "actions,s500";
+	model = "CubieBoard6";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
new file mode 100644
index 000000000..e610d4939
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500-guitar.dtsi"
+
+/ {
+	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+	model = "LeMaker Guitar Base Board rev. B";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/owl-s500-guitar.dtsi
new file mode 100644
index 000000000..81cc39871
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-guitar.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * LeMaker Guitar SoM
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "lemaker,guitar", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
new file mode 100644
index 000000000..c92f8bdcb
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+	compatible = "caninos,labrador-base-m",
+		     "caninos,labrador-v2", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000..883ff2f98
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
new file mode 100644
index 000000000..a2087e617
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "roseapplepi,roseapplepi", "actions,s500";
+	model = "Roseapple Pi";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	uart2_clk: uart2-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&twd_timer {
+	status = "okay";
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart2 {
+	status = "okay";
+	clocks = <&uart2_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts
new file mode 100644
index 000000000..c665ce8b8
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-sparky.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Allo.com Sparky
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "allo,sparky", "actions,s500";
+	model = "Allo.com Sparky";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
new file mode 100644
index 000000000..1dbe4e8b3
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
new file mode 100644
index 000000000..7e2fcb220
--- /dev/null
+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+#include "ox810se.dtsi"
+
+/ {
+	model = "Western Digital My Book World Edition";
+
+	compatible = "wd,mbwe", "oxsemi,ox810se";
+
+	chosen {
+		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x48000000 0x8000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		power {
+			label = "power";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+
+		recovery {
+			label = "recovery";
+			gpios = <&gpio0 4 1>;
+			linux,code = <0xab>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		a0 {
+			label = "activity0";
+			gpios = <&gpio0 25 0>;
+			default-state = "keep";
+		};
+
+		a1 {
+			label = "activity1";
+			gpios = <&gpio0 26 0>;
+			default-state = "keep";
+		};
+
+		a2 {
+			label = "activity2";
+			gpios = <&gpio0 5 0>;
+			default-state = "keep";
+		};
+
+		a3 {
+			label = "activity3";
+			gpios = <&gpio0 6 0>;
+			default-state = "keep";
+		};
+
+		a4 {
+			label = "activity4";
+			gpios = <&gpio0 7 0>;
+			default-state = "keep";
+		};
+
+		a5 {
+			label = "activity5";
+			gpios = <&gpio1 2 0>;
+			default-state = "keep";
+		};
+	};
+
+	i2c-gpio {
+		compatible = "i2c-gpio";
+		gpios = <&gpio0 3 0 /* sda */
+			 &gpio0 2 0 /* scl */
+			 >;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc0: rtc@48 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
new file mode 100644
index 000000000..0755e5864
--- /dev/null
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/clock/oxsemi,ox810se.h>
+#include <dt-bindings/reset/oxsemi,ox810se.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "oxsemi,ox810se";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			clocks = <&armclk>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* Max 256MB @ 0x48000000 */
+		reg = <0x48000000 0x10000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		rpsclk: rpsclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		pll400: pll400 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <733333333>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll400>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox810se-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0a {
+						pins = "gpio31";
+						function = "fct3";
+					};
+					uart0b {
+						pins = "gpio32";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0c {
+						pins = "gpio27";
+						function = "fct3";
+					};
+					uart0d {
+						pins = "gpio28";
+						function = "fct3";
+					};
+					uart0e {
+						pins = "gpio29";
+						function = "fct3";
+					};
+					uart0f {
+						pins = "gpio30";
+						function = "fct3";
+					};
+					uart0g {
+						pins = "gpio33";
+						function = "fct3";
+					};
+					uart0h {
+						pins = "gpio34";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1a {
+						pins = "gpio20";
+						function = "fct3";
+					};
+					uart1b {
+						pins = "gpio22";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1c {
+						pins = "gpio8";
+						function = "fct3";
+					};
+					uart1d {
+						pins = "gpio9";
+						function = "fct3";
+					};
+					uart1e {
+						pins = "gpio23";
+						function = "fct3";
+					};
+					uart1f {
+						pins = "gpio24";
+						function = "fct3";
+					};
+					uart1g {
+						pins = "gpio25";
+						function = "fct3";
+					};
+					uart1h {
+						pins = "gpio26";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2: uart2 {
+					uart2a {
+						pins = "gpio6";
+						function = "fct3";
+					};
+					uart2b {
+						pins = "gpio7";
+						function = "fct3";
+					};
+				};
+
+				pinctrl_uart2_modem: uart2_modem {
+					uart2c {
+						pins = "gpio0";
+						function = "fct3";
+					};
+					uart2d {
+						pins = "gpio1";
+						function = "fct3";
+					};
+					uart2e {
+						pins = "gpio2";
+						function = "fct3";
+					};
+					uart2f {
+						pins = "gpio3";
+						function = "fct3";
+					};
+					uart2g {
+						pins = "gpio4";
+						function = "fct3";
+					};
+					uart2h {
+						pins = "gpio5";
+						function = "fct3";
+					};
+				};
+			};
+
+			gpio0: gpio@0 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox810se-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <3>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 3>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <23>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset RESET_UART1>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x300000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <24>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset RESET_UART2>;
+			};
+
+			uart2: serial@900000 {
+			       compatible = "ns16550a";
+			       reg = <0x900000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <29>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset RESET_UART3>;
+			};
+
+			uart3: serial@a00000 {
+			       compatible = "ns16550a";
+			       reg = <0xa00000 0x100000>;
+			       clocks = <&sysclk>;
+			       interrupts = <30>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       resets = <&reset RESET_UART4>;
+			};
+		};
+
+		apb-bridge@45000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x45000000 0x1000000>;
+
+			sys: sys-ctrl@0 {
+				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0x000000 0x100000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+
+			rps@300000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x300000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox810se-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&rpsclk>;
+					interrupts = <4 5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
new file mode 100644
index 000000000..c3daceccd
--- /dev/null
+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+#include "ox820.dtsi"
+
+/ {
+	model = "Cloud Engines PogoPlug Series 3";
+
+	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		/* 128Mbytes DDR */
+		reg = <0x60000000 0x8000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "pogoplug:blue";
+			gpios = <&gpio0 2 0>;
+			default-state = "keep";
+		};
+
+		orange {
+			label = "pogoplug:orange";
+			gpios = <&gpio1 16 1>;
+			default-state = "keep";
+		};
+
+		green {
+			label = "pogoplug:green";
+			gpios = <&gpio1 17 1>;
+			default-state = "keep";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&nandc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "hamming";
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00e00000>;
+			read-only;
+		};
+
+		partition@e00000 {
+			label = "ubi";
+			reg = <0x00e00000 0x07200000>;
+		};
+	};
+};
+
+&etha {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_etha_mdio>;
+};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
new file mode 100644
index 000000000..dde436489
--- /dev/null
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
+ *
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/oxsemi,ox820.h>
+#include <dt-bindings/reset/oxsemi,ox820.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "oxsemi,ox820";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "oxsemi,ox820-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			clocks = <&armclk>;
+			reg = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* Max 512MB @ 0x60000000 */
+		reg = <0x60000000 0x20000000>;
+	};
+
+	clocks {
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		sysclk: sysclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&osc>;
+		};
+
+		plla: plla {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <850000000>;
+		};
+
+		armclk: armclk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&plla>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&gic>;
+
+		nandc: nand-controller@41000000 {
+			compatible = "oxsemi,ox820-nand";
+			reg = <0x41000000 0x100000>;
+			clocks = <&stdclk CLK_820_NAND>;
+			resets = <&reset RESET_NAND>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset RESET_MAC>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
+		apb-bridge@44000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x44000000 0x1000000>;
+
+			pinctrl: pinctrl {
+				compatible = "oxsemi,ox820-pinctrl";
+
+				/* Regmap for sys registers */
+				oxsemi,sys-ctrl = <&sys>;
+
+				pinctrl_uart0: uart0 {
+					uart0 {
+						pins = "gpio30", "gpio31";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart0_modem: uart0_modem {
+					uart0_modem_a {
+						pins = "gpio24", "gpio24", "gpio26", "gpio27";
+						function = "fct4";
+					};
+					uart0_modem_b {
+						pins = "gpio28", "gpio29";
+						function = "fct5";
+					};
+				};
+
+				pinctrl_uart1: uart1 {
+					uart1 {
+						pins = "gpio7", "gpio8";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_uart1_modem: uart1_modem {
+					uart1_modem {
+						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
+						function = "fct4";
+					};
+				};
+
+				pinctrl_etha_mdio: etha_mdio {
+					etha_mdio {
+						pins = "gpio3", "gpio4";
+						function = "fct1";
+					};
+				};
+
+				pinctrl_nand: nand {
+					nand {
+						pins = "gpio12", "gpio13", "gpio14", "gpio15",
+						     "gpio16", "gpio17", "gpio18", "gpio19",
+						     "gpio20", "gpio21", "gpio22", "gpio23",
+						     "gpio24";
+						function = "fct1";
+					};
+				};
+			};
+
+			gpio0: gpio@0 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x000000 0x100000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <32>;
+				oxsemi,gpio-bank = <0>;
+				gpio-ranges = <&pinctrl 0 0 32>;
+			};
+
+			gpio1: gpio@100000 {
+				compatible = "oxsemi,ox820-gpio";
+				reg = <0x100000 0x100000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <18>;
+				oxsemi,gpio-bank = <1>;
+				gpio-ranges = <&pinctrl 0 32 18>;
+			};
+
+			uart0: serial@200000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset RESET_UART1>;
+			};
+
+			uart1: serial@300000 {
+			       compatible = "ns16550a";
+			       reg = <0x200000 0x100000>;
+			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			       reg-shift = <0>;
+			       fifo-size = <16>;
+			       reg-io-width = <1>;
+			       current-speed = <115200>;
+			       no-loopback-test;
+			       status = "disabled";
+			       clocks = <&sysclk>;
+			       resets = <&reset RESET_UART2>;
+			};
+
+			rps@400000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "simple-bus";
+				ranges = <0 0x400000 0x100000>;
+
+				intc: interrupt-controller@0 {
+					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
+					interrupt-controller;
+					reg = <0 0x200>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					#interrupt-cells = <1>;
+					valid-mask = <0xffffffff>;
+					clear-mask = <0xffffffff>;
+				};
+
+				timer0: timer@200 {
+					compatible = "oxsemi,ox820-rps-timer";
+					reg = <0x200 0x40>;
+					clocks = <&sysclk>;
+					interrupt-parent = <&intc>;
+					interrupts = <4>;
+				};
+			};
+
+			sys: sys-ctrl@e00000 {
+				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
+				reg = <0xe00000 0x200000>;
+
+				reset: reset-controller {
+					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
+					#reset-cells = <1>;
+				};
+
+				stdclk: stdclk {
+					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
+					#clock-cells = <1>;
+				};
+			};
+		};
+
+		apb-bridge@47000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0 0x47000000 0x1000000>;
+
+			scu: scu@0 {
+				compatible = "arm,arm11mp-scu";
+				reg = <0x0 0x100>;
+			};
+
+			local-timer@600 {
+				compatible = "arm,arm11mp-twd-timer";
+				reg = <0x600 0x20>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&armclk>;
+			};
+
+			gic: interrupt-controller@1000 {
+				compatible = "arm,arm11mp-gic";
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				reg = <0x1000 0x1000>,
+				      <0x100 0x500>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 000000000..5898879a3
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ */
+/ {
+	model = "Picochip picoXcell PC3X2";
+	compatible = "picochip,pc3x2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1176jz-s";
+			device_type = "cpu";
+			clock-frequency = <400000000>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pclk: clock@0 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x2";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@0 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic1>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			timer2: timer@10028 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x10028 0x14>;
+			};
+
+			timer3: timer@1003c {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x1003c 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x2";
+			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 000000000..0e85bb6bd
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ */
+/ {
+	model = "Picochip picoXcell PC3X3";
+	compatible = "picochip,pc3x3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1176jz-s";
+			device_type = "cpu";
+			cpu-clock = <&arm_clk>, "cpu";
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clkgate: clkgate@800a0048 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x800a0048 4>;
+			compatible = "picochip,pc3x3-clk-gate";
+
+			tzprot_clk: clock@0 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <0>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			spi_clk: clock@1 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <1>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac0_clk: clock@2 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <2>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac1_clk: clock@3 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <3>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ebi_clk: clock@4 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <4>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ipsec_clk: clock@5 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <5>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			l2_clk: clock@6 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <6>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			trng_clk: clock@7 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <7>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			fuse_clk: clock@8 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <8>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			otp_clk: clock@9 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <9>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+		};
+
+		arm_clk: clock@11 {
+			compatible = "picochip,pc3x3-pll";
+			reg = <0x800a0050 0x8>;
+			picochip,min-freq = <140000000>;
+			picochip,max-freq = <700000000>;
+			ref-clock = <&ref_clk>, "ref";
+			clock-outputs = "cpu";
+		};
+
+		pclk: clock@12 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x3";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&ipsec_clk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&l2_clk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@0 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic0>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <16>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+
+				bankd: gpio-controller@2 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <30>;
+
+					regoffset-dat = <0x5c>;
+					regoffset-set = <0x24>;
+					regoffset-dirout = <0x28>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+
+			timer2: timer@60000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x60000 0x14>;
+			};
+
+			timer3: timer@60014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x60014 0x14>;
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x3";
+			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+
+		otp@ffff8000 {
+			compatible = "picochip,otp-pc3x3";
+			reg = <0xffff8000 0x8000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 000000000..3626e5380
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X2)";
+	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@1 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&pclk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 000000000..3eca65e8e
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X3)";
+	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@10 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+
+		clkgate: clkgate@800a0048 {
+			clock@4 {
+				picochip,clk-no-disable;
+			};
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&ebi_clk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
new file mode 100644
index 000000000..c349fd375
--- /dev/null
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pm9g45.dts - Device Tree file for Ronetix pm9g45 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g45.dtsi"
+
+/ {
+	model = "Ronetix pm9g45";
+	compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+		      clock-frequency = <32768>;
+		};
+
+		main_xtal {
+		      clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				nand {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc {
+					pinctrl_board_mmc: mmc0-board {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD6 gpio CD pin pull_up and deglitch */
+					};
+				};
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fff80000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 3 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x1A0000>;
+						};
+
+						kernel@200000 {
+							label = "bareboxenv2";
+							reg = <0x200000 0x300000>;
+						};
+
+						kernel@500000 {
+							label = "root";
+							reg = <0x500000 0x400000>;
+						};
+
+						data@900000 {
+							label = "data";
+							reg = <0x900000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@700000 {
+			status = "okay";
+			num-ports = <2>;
+		};
+
+		usb1: ehci@800000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "led0";
+			gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led1 {
+			label = "led1";
+			gpios = <&pioD 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		right {
+			label = "SW4";
+			gpios = <&pioE 7 GPIO_ACTIVE_LOW>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "SW3";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,code = <103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
new file mode 100644
index 000000000..7394f764d
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+	model = "CSR SiRFprimaII Evaluation Board";
+	compatible = "sirf,prima2", "sirf,prima2-cb";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
new file mode 100644
index 000000000..7d3d93c22
--- /dev/null
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ */
+
+/ {
+	compatible = "sirf,prima2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				664000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		cache-controller@80040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x80040000 0x1000>;
+			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
+		};
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clks: clock-controller@88000000 {
+				compatible = "sirf,prima2-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+				#clock-cells = <1>;
+			};
+
+			rstc: reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x2000>;
+				interrupts = <27>;
+				clocks = <&clks 5>;
+			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			display@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+				clocks = <&clks 35>;
+				resets = <&rstc 6>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,prima2-video-codec";
+				reg = <0xa0000000 0x8000000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+				resets = <&rstc 1>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+				clocks = <&clks 9>;
+				resets = <&rstc 2>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+				clocks = <&clks 8>;
+				resets = <&rstc 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+				clocks = <&clks 11>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+				clocks = <&clks 26>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+				clocks = <&clks 27>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x1000>;
+				interrupts = <17>;
+				fifosize = <128>;
+				clocks = <&clks 13>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x1000>;
+				interrupts = <18>;
+				fifosize = <32>;
+				clocks = <&clks 14>;
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x1000>;
+				interrupts = <19>;
+				fifosize = <128>;
+				clocks = <&clks 15>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+				fifosize = <128>;
+				clocks = <&clks 28>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+				fifosize = <128>;
+				clocks = <&clks 29>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
+			};
+
+			usp2: usp@b00a0000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb00a0000 0x10000>;
+				interrupts = <22>;
+				fifosize = <128>;
+				clocks = <&clks 30>;
+				dmas = <&dmac0 10>, <&dmac0 11>;
+				dma-names = "rx", "tx";
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+				clocks = <&clks 24>;
+				#dma-cells = <1>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+				clocks = <&clks 25>;
+				#dma-cells = <1>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 19>;
+				status = "disabled";
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 20>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+				clocks = <&clks 17>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+				clocks = <&clks 18>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+				clocks = <&clks 16>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,prima2-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+				i2s_mclk_pins_a: i2s_mclk@0 {
+                                        i2s_mclk {
+                                                sirf,pins = "i2smclkgrp";
+                                                sirf,function = "i2s_mclk";
+                                        };
+                                };
+				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+                                        i2s_ext_clk_input {
+                                                sirf,pins = "i2s_ext_clk_inputgrp";
+                                                sirf,function = "i2s_ext_clk_input";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+				i2s_no_din_pins_a: i2s_no_din@0 {
+                                        i2s_no_din {
+                                                sirf,pins = "i2s_no_dingrp";
+                                                sirf,function = "i2s_no_din";
+                                        };
+                                };
+				i2s_6chn_pins_a: i2s_6chn@0 {
+                                        i2s_6chn {
+                                                sirf,pins = "i2s_6chngrp";
+                                                sirf,function = "i2s_6chn";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins =
+							"usp0_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp0_uart_nostreamctrl";
+                                        };
+                                };
+                                usp0_only_utfs_pins_a: usp0@2 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_utfs_grp";
+                                                sirf,function = "usp0_only_utfs";
+                                        };
+                                };
+                                usp0_only_urfs_pins_a: usp0@3 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_urfs_grp";
+                                                sirf,function = "usp0_only_urfs";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins =
+							"usp1_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp1_uart_nostreamctrl";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+				usp2_uart_nostreamctrl_pins_a: usp2@1 {
+                                        usp2 {
+                                                sirf,pins =
+							"usp2_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp2_uart_nostreamctrl";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
+                                        };
+                                };
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+				clocks = <&clks 21>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+				clocks = <&clks 22>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+				clocks = <&clks 23>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <8>;
+					clocks = <&clks 36>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 36>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
+				};
+
+				sd4: sdhci@56400000 {
+					cell-index = <4>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56400000 0x100000>;
+					interrupts = <39>;
+					status = "disabled";
+					clocks = <&clks 38>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+					clocks = <&clks 38>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+				clocks = <&clks 40>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+				clocks = <&clks 41>;
+			};
+
+			sata@b00f0000 {
+				compatible = "synopsys,dwc-ahsata";
+				reg = <0xb8020000 0x10000>;
+				interrupts = <37>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+				clocks = <&clks 7>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
new file mode 100644
index 000000000..8bade6bf3
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168-aspenite.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
new file mode 100644
index 000000000..4fe7735c7
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,pxa168.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA168_CLK_UART0>;
+				resets = <&soc_clocks PXA168_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA168_CLK_UART1>;
+				resets = <&soc_clocks PXA168_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4026000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4026000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <29>;
+				clocks = <&soc_clocks PXA168_CLK_UART2>;
+				resets = <&soc_clocks PXA168_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				clocks = <&soc_clocks PXA168_CLK_GPIO>;
+				resets = <&soc_clocks PXA168_CLK_GPIO>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
+				resets = <&soc_clocks PXA168_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
+				resets = <&soc_clocks PXA168_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5>, <6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA168_CLK_RTC>;
+				resets = <&soc_clocks PXA168_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa168-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
new file mode 100644
index 000000000..a248bf038
--- /dev/null
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr>
+ */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA25x family SoC";
+	compatible = "marvell,pxa250";
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa250-core-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+
+		/* timer oscillator */
+		clktimer: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <3686400>;
+			clock-output-names = "ostimer";
+		};
+	};
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <16>;
+			#dma-cells = <2>;
+			#dma-requests = <40>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <32>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa25x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa25x-gpio";
+			gpio-ranges = <&pinctrl 0 0 84>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clktimer>;
+		status = "okay";
+	};
+
+	pxa250_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp-99532800 {
+			opp-hz = /bits/ 64 <99532800>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-199065600 {
+			opp-hz = /bits/ 64 <199065600>;
+			opp-microvolt = <1000000 950000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-298598400 {
+			opp-hz = /bits/ 64 <298598400>;
+			opp-microvolt = <1100000 1045000 1650000>;
+			clock-latency-ns = <20>;
+		};
+		opp-398131200 {
+			opp-hz = /bits/ 64 <398131200>;
+			opp-microvolt = <1300000 1235000 1650000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
new file mode 100644
index 000000000..ccbecad9c
--- /dev/null
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
+
+/ {
+	model = "Marvell PXA27x familiy SoC";
+	compatible = "marvell,pxa27x";
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			#dma-requests = <75>;
+			status = "okay";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <34>;
+		};
+
+		pinctrl: pinctrl@40e00000 {
+			reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4
+			       0x40f00020 0x10>;
+			compatible = "marvell,pxa27x-pinctrl";
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa27x-gpio";
+			gpio-ranges = <&pinctrl 0 0 128>;
+			clocks = <&clks CLK_NONE>;
+		};
+
+		usb0: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBHOST>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		pwri2c: i2c@40f00180 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40f00180 0x24>;
+			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pxa27x_udc: udc@40600000 {
+			compatible = "marvell,pxa270-udc";
+			reg = <0x40600000 0x10000>;
+			interrupts = <11>;
+			clocks = <&clks CLK_USB>;
+			status = "disabled";
+		};
+
+		keypad: keypad@41500000 {
+			compatible = "marvell,pxa27x-keypad";
+			reg = <0x41500000 0x4c>;
+			interrupts = <4>;
+			clocks = <&clks CLK_KEYPAD>;
+			status = "disabled";
+		};
+
+		pxa_camera: imaging@50000000 {
+			compatible = "marvell,pxa270-qci";
+			reg = <0x50000000 0x1000>;
+			interrupts = <33>;
+			dmas = <&pdma 68 0	/* Y channel */
+				&pdma 69 0	/* U channel */
+				&pdma 70 0>;	/* V channel */
+			dma-names = "CI_Y", "CI_U", "CI_V";
+
+			clocks = <&clks CLK_CAMERA>;
+			clock-names = "ciclk";
+			clock-frequency = <5000000>;
+			clock-output-names = "qci_mclk";
+
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
+	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa270-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clks CLK_OSTIMER>;
+		status = "okay";
+	};
+
+	pxa270_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp-104000000 {
+			opp-hz = /bits/ 64 <104000000>;
+			opp-microvolt = <900000 900000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-156000000 {
+			opp-hz = /bits/ 64 <156000000>;
+			opp-microvolt = <1000000 1000000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-208000000 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1180000 1180000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1250000 1250000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-microvolt = <1350000 1350000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-520000000 {
+			opp-hz = /bits/ 64 <520000000>;
+			opp-microvolt = <1450000 1450000 1705000>;
+			clock-latency-ns = <20>;
+		};
+		opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <1550000 1550000 1705000>;
+			clock-latency-ns = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
new file mode 100644
index 000000000..84154c43f
--- /dev/null
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include "dt-bindings/clock/pxa-clock.h"
+
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af)			\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+	}
+#define PMMUX_LPM_LOW(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-disable;		\
+	}
+#define PMMUX_LPM_HIGH(func, pin, af)		\
+	mux- ## func {				\
+		groups = PMGROUP(P ## pin);	\
+		function = #af;			\
+		low-power-enable;		\
+	}
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Marvell PXA2xx family SoC";
+	compatible = "marvell,pxa2xx";
+	interrupt-parent = <&pxairq>;
+
+	aliases {
+		serial0 = &ffuart;
+		serial1 = &btuart;
+		serial2 = &stuart;
+		serial3 = &hwuart;
+		i2c0 = &pwri2c;
+		i2c1 = &pxai2c1;
+	};
+
+	cpus {
+		cpu {
+			compatible = "marvell,xscale";
+			device_type = "cpu";
+		};
+	};
+
+	pxabus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxairq: interrupt-controller@40d00000 {
+			#interrupt-cells = <1>;
+			compatible = "marvell,pxa-intc";
+			interrupt-controller;
+			interrupt-parent;
+			marvell,intc-nr-irqs = <32>;
+			reg = <0x40d00000 0xd0>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "mrvl,pxa-gpio";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x40e00000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupts = <8>, <9>, <10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+			ranges;
+
+			gcb0: gpio@40e00000 {
+				reg = <0x40e00000 0x4>;
+			};
+
+			gcb1: gpio@40e00004 {
+				reg = <0x40e00004 0x4>;
+			};
+
+			gcb2: gpio@40e00008 {
+				reg = <0x40e00008 0x4>;
+			};
+			gcb3: gpio@40e0000c {
+				reg = <0x40e0000c 0x4>;
+			};
+		};
+
+		ffuart: serial@40100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40100000 0x30>;
+			interrupts = <22>;
+			clocks = <&clks CLK_FFUART>;
+			status = "disabled";
+		};
+
+		btuart: serial@40200000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40200000 0x30>;
+			interrupts = <21>;
+			clocks = <&clks CLK_BTUART>;
+			status = "disabled";
+		};
+
+		stuart: serial@40700000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40700000 0x30>;
+			interrupts = <20>;
+			clocks = <&clks CLK_STUART>;
+			status = "disabled";
+		};
+
+		hwuart: serial@41600000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x41600000 0x30>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		pxai2c1: i2c@40301680 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40301680 0x30>;
+			interrupts = <18>;
+			clocks = <&clks CLK_I2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			compatible = "marvell,pxa-rtc";
+			reg = <0x40900000 0x3c>;
+			interrupts = <30 31>;
+		};
+
+		lcdc: lcd-controller@40500000 {
+			compatible = "marvell,pxa2xx-lcdc";
+			reg = <0x44000000 0x10000>;
+			interrupts = <17>;
+			clocks = <&clks CLK_LCD>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
new file mode 100644
index 000000000..8a6721d43
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* Will be overridden by bootloader */
+	hw-revision = <0>;
+
+	chosen {
+		bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+		stdout-path = &ffuart;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xa0000000 0x8000000>;	/* 128 MB */
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_va_5v0: regulator-va-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-5v0-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ssp_dai0: ssp-dai0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp0_dai_pins>;
+		port = <&ssp1>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 13 3
+			&pdma 14 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	ssp_dai1: ssp-dai1 {
+		compatible = "mrvl,pxa-ssp-dai";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssp1_dai_pins>;
+		port = <&ssp2>;
+		#sound-dai-cells = <0>;
+		dmas = <&pdma 15 3
+			&pdma 16 3>;
+		dma-names = "rx", "tx";
+		clock-names = "extclk";
+	};
+
+	spi: spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_pins>;
+		gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <
+			&gpio 34 GPIO_ACTIVE_HIGH
+			&gpio 125 GPIO_ACTIVE_HIGH
+			&gpio 96 GPIO_ACTIVE_HIGH
+		>;
+		num-chipselects = <3>;
+
+		dac: dac@2 {
+			compatible = "ti,dac7512";
+			reg = <2>;
+			spi-max-frequency = <1000000>;
+			vcc-supply = <&reg_3v3>;
+		};
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		on-off {
+			label = "on_off button";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F6>;
+		};
+
+		rescue-boot {
+			label = "rescue boot button";
+			gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F4>;
+		};
+
+		setup {
+			label = "setup";
+			gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_F3>;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio 19 GPIO_ACTIVE_LOW
+			&gpio 20 GPIO_ACTIVE_HIGH
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+		left {
+			label = "raumfeld:1";
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		right {
+			label = "raumfeld:2";
+			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&poweroff_pins>;
+		gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc0_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc0_pwrseq_pins>;
+		reset-gpios = <
+			&gpio 113 GPIO_ACTIVE_LOW	/* W2W_RESET	*/
+			&gpio 114 GPIO_ACTIVE_LOW	/* W2W_PDN	*/
+		>;
+	};
+
+	ethernet: ethernet@10000000 {
+		compatible = "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+		reg = <0x10000000 0x100000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio>;
+		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+		vdd33a-supply = <&reg_3v3>;
+		vddvario-supply = <&reg_1v8>;
+		reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+		smsc,irq-push-pull;
+	};
+};
+
+&ffuart {
+	status = "okay";
+};
+
+&pwri2c {
+	status = "okay";
+
+	max8660: regulator@34 {
+		compatible = "maxim,max8660";
+		reg = <0x34>;
+
+		regulators {
+			regulator-v3 {
+				regulator-compatible= "V3(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v4 {
+				regulator-compatible= "V4(DCDC)";
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			regulator-v5 {
+				regulator-compatible= "V5(LDO)";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			reg_vcc_sdio: regulator-v6 {
+				regulator-compatible= "V6(LDO)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			regulator-v7 {
+				regulator-compatible= "V7(LDO)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&pxai2c1 {
+	status = "okay";
+	mrvl,i2c-fast-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		marvell,nand-keep-config;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x0000000 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "BootloaderEnvironment";
+				reg = <0x0a0000 0x20000>;
+			};
+
+			partition@c0000 {
+				label = "BootloaderSplashScreen";
+				reg = <0x0c0000 0x60000>;
+			};
+
+			partition@120000 {
+				label = "UBI";
+				reg = <0x120000 0x7ee0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	marvell,enable-port1;
+	marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	pxa-mmc,detect-delay-ms = <200>;
+	vmmc-supply = <&reg_vcc_sdio>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	non-removable;
+	bus-width = <4>;
+};
+
+&pinctrl {
+	poweroff_pins: poweroff-pins {
+		pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	led_pins_a: led-pins-a {
+		pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	led_pins_b: led-pins-b {
+		pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	pxai2c1_pins: pxai2c1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(21) MFP_AF1	/* I2C_SCL	*/
+			MFP_PIN_PXA300(22) MFP_AF1	/* I2C_SDA	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(14) MFP_AF0	/* on-off	*/
+			MFP_PIN_PXA300(115) MFP_AF0	/* rescue boot	*/
+			MFP_PIN_PXA300(119) MFP_AF0	/* setup	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	spi_pins: spi-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(95) MFP_AF0	/* SCK		*/
+			MFP_PIN_PXA300(97) MFP_AF0	/* MOSI		*/
+			MFP_PIN_PXA300(98) MFP_AF0	/* MISO		*/
+			MFP_PIN_PXA300(34) MFP_AF0	/* CS#0		*/
+			MFP_PIN_PXA300(125) MFP_AF0	/* CS#1		*/
+			MFP_PIN_PXA300(96) MFP_AF0	/* CS#2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300_2(0) MFP_AF1	/* USBHPEN	*/
+			MFP_PIN_PXA300_2(1) MFP_AF1	/* USBHPWR	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_pins: smsc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(39) MFP_AF0	/* RESET	*/
+			MFP_PIN_PXA300(40) MFP_AF0	/* IRQ		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	smsc_bus_pins: smsc-bus-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(1) MFP_AF1	/* nCS2		*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(3) MFP_AF4	/* MMC1_DAT0	*/
+			MFP_PIN_PXA300(4) MFP_AF4	/* MMC1_DAT1	*/
+			MFP_PIN_PXA300(5) MFP_AF4	/* MMC1_DAT2	*/
+			MFP_PIN_PXA300(6) MFP_AF4	/* MMC1_DAT3	*/
+			MFP_PIN_PXA300(7) MFP_AF4	/* MMC1_CLK	*/
+			MFP_PIN_PXA300(8) MFP_AF4	/* MMC1_CMD	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+	};
+
+	mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(113) MFP_AF0	/* W2W_RESET	*/
+			MFP_PIN_PXA300(114) MFP_AF0	/* W2W_PDN	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	ssp0_dai_pins: ssp0-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(85) MFP_AF1	/* SSP1_SCLK	*/
+			MFP_PIN_PXA300(86) MFP_AF1	/* SSP1_FRM	*/
+			MFP_PIN_PXA300(87) MFP_AF1	/* SSP1_TXD	*/
+			MFP_PIN_PXA300(88) MFP_AF1	/* SSP1_RXD	*/
+			MFP_PIN_PXA300(89) MFP_AF1	/* SSP1_EXTCLK	*/
+			MFP_PIN_PXA300(90) MFP_AF1	/* SSP1_SYSCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	ssp1_dai_pins: ssp1-dai-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(25) MFP_AF2	/* SSP2_SCLK	*/
+			MFP_PIN_PXA300(26) MFP_AF2	/* SSP2_FRM	*/
+			MFP_PIN_PXA300(27) MFP_AF2	/* SSP2_TXD	*/
+			MFP_PIN_PXA300(29) MFP_AF2	/* SSP2_EXTCLK	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
new file mode 100644
index 000000000..3e9445419
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Connector (PXA3xx)";
+	compatible = "raumfeld,raumfeld-connector-pxa303", "marvell,pxa300";
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Connector";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_digital>;
+			frame-master = <&dailink_master_digital>;
+			mclk-fs = <256>;
+
+			dailink_master_digital: cpu {
+				sound-dai = <&ssp_dai1>;
+			};
+
+			codec {
+				sound-dai = <&ak4104>;
+			};
+		};
+	};
+};
+
+&ssp1 {
+	status = "okay";
+};
+
+&ssp2 {
+	status = "okay";
+};
+
+&spi {
+	ak4104: optical-transmitter@0 {
+		compatible = "asahi-kasei,ak4104";
+		reg = <0>;
+		vdd-supply = <&reg_3v3>;
+		spi-max-frequency = <5000000>;
+		reset-gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&rotary {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
new file mode 100644
index 000000000..12b15945a
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Controller (PXA3xx)";
+	compatible = "raumfeld,raumfeld-controller-pxa303", "marvell,pxa300";
+
+	reg_vbatt: regulator-vbatt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbatt-fixed-supply";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	lcd_supply: regulator-va-tft {
+		compatible = "regulator-fixed";
+		regulator-name = "va-tft-fixed-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_pins>;
+		gpios = <
+			&gpio 126 GPIO_OPEN_DRAIN	/* W1 I/O	*/
+			&gpio 105 GPIO_ACTIVE_HIGH	/* pullup	*/
+		>;
+
+		w1_ds2760: slave-ds2760 {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};
+
+	charger: charger {
+		pinctrl-names = "default";
+		pinctrl-0 = <&charger_pins>;
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * One of the following two will be set to "okay" by the bootloader,
+	 * depending on the hardware revision.
+	 */
+	backlight-controller-pwm {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pins>;
+		pwms = <&pwm0 10000>;
+		power-supply = <&reg_vbatt>;
+		status = "disabled";
+
+		brightness-levels = <
+			 0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-controller {
+		compatible = "lltc,lt3593";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt3593_pins>;
+		lltc,ctrl-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		led {
+			label = "backlight";
+			default-state = "on";
+		};
+	};
+};
+
+&reg_va_5v0 {
+	status = "disabled";
+};
+
+&ethernet {
+	status = "disabled";
+};
+
+&leds {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&keys {
+	pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
+	dock-detect {
+		label = "dock detect";
+		gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_F5>;
+	};
+};
+
+&spi {
+	accelerometer@1 {
+		compatible = "st,lis302dl-spi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lis302_pins>;
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 IRQ_TYPE_EDGE_FALLING>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdc_pins>;
+	lcd-supply = <&lcd_supply>;
+
+	port {
+		lcdc_out: endpoint {
+			remote-endpoint = <&panel_in>;
+			bus-width = <16>;
+		};
+	};
+
+	panel {
+		compatible = "sharp,lq043t3dx0-panel";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing {
+				clock-frequency = <9009000>;
+				pixelclk-active = <0>;	/* negative edge */
+				hactive = <480>;
+				vactive = <272>;
+				hsync-len = <41>;
+				hback-porch = <2>;
+				hfront-porch = <1>;
+				vsync-len = <10>;
+				vback-porch = <3>;
+				vfront-porch = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdc_out>;
+			};
+		};
+	};
+};
+
+&gcu {
+	status = "okay";
+};
+
+&pxai2c1 {
+	touchscreen@a {
+		compatible = "eeti,exc3000-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeti_ts_pins>;
+		reg = <0xa>;
+		interrupt-parent = <&gpio>;
+		interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+		attn-gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-y;
+	};
+};
+
+&pinctrl {
+	lis302_pins: lis302-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(104) MFP_AF0	/* IRQ	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	eeti_ts_pins: eeti-ts-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(32) MFP_AF0	/* IRQ */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	lt3593_pins: lt3593-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF0	/* Backlight	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	pwm0_pins: pwm0-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(17) MFP_AF1	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	w1_pins: w1-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(126) MFP_AF0	/* PWM	*/
+			MFP_PIN_PXA300(105) MFP_AF0	/* PWM	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+
+	charger_pins: charger_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(31) MFP_AF0	/* PEN2	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	dock_detect_pins: dock_detect_pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(116) MFP_AF0	/* DOCK_DETECT	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+		pinctrl-single,bias-pullup = MPF_PULL_UP;
+	};
+
+	lcdc_pins: lcdc-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(54) MFP_AF1	/* LDD_0	*/
+			MFP_PIN_PXA300(55) MFP_AF1	/* LDD_1	*/
+			MFP_PIN_PXA300(56) MFP_AF1	/* LDD_2	*/
+			MFP_PIN_PXA300(57) MFP_AF1	/* LDD_3	*/
+			MFP_PIN_PXA300(58) MFP_AF1	/* LDD_4	*/
+			MFP_PIN_PXA300(59) MFP_AF1	/* LDD_5	*/
+			MFP_PIN_PXA300(60) MFP_AF1	/* LDD_6	*/
+			MFP_PIN_PXA300(61) MFP_AF1	/* LDD_7	*/
+			MFP_PIN_PXA300(62) MFP_AF1	/* LDD_8	*/
+			MFP_PIN_PXA300(63) MFP_AF1	/* LDD_9	*/
+			MFP_PIN_PXA300(64) MFP_AF1	/* LDD_10	*/
+			MFP_PIN_PXA300(65) MFP_AF1	/* LDD_11	*/
+			MFP_PIN_PXA300(66) MFP_AF1	/* LDD_12	*/
+			MFP_PIN_PXA300(67) MFP_AF1	/* LDD_13	*/
+			MFP_PIN_PXA300(68) MFP_AF1	/* LDD_14	*/
+			MFP_PIN_PXA300(69) MFP_AF1	/* LDD_15	*/
+			MFP_PIN_PXA300(70) MFP_AF1	/* LDD_16	*/
+			MFP_PIN_PXA300(71) MFP_AF1	/* LDD_17	*/
+			MFP_PIN_PXA300(72) MFP_AF1	/* LCD_FCLK	*/
+			MFP_PIN_PXA300(73) MFP_AF1	/* LCD_LCLK	*/
+			MFP_PIN_PXA300(74) MFP_AF1	/* LCD_PCLK	*/
+			MFP_PIN_PXA300(75) MFP_AF1	/* LCD_BIAS	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
new file mode 100644
index 000000000..5a0f7f178
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker L (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-l-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
new file mode 100644
index 000000000..fa10d8962
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker M (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-m-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
new file mode 100644
index 000000000..a70560a8e
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+
+/ {
+	model = "Raumfeld Speaker One (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-one-pxa303", "marvell,pxa300";
+
+	wm8782: wm8782 {
+		compatible = "wm8782";
+		#sound-dai-cells = <0>;
+		Vdd-supply = <&reg_3v3>;
+		Vdda-supply = <&reg_va_5v0>;
+	};
+
+	xo_11mhz: oscillator-11mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-accuracy = <100>;
+	};
+
+	xo_audio: clock-gate {
+		compatible = "gpio-gate-clock";
+		pinctrlnames = "default";
+		pinctrl-0 = <&xo_audio_pins>;
+		clocks = <&xo_11mhz>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_va_30v0: regulator-va-30v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "va-30v0-fixed-supply";
+		regulator-min-microvolt = <30000000>;
+		regulator-max-microvolt = <30000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_out>;
+			frame-master = <&dailink_master_analog_out>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_out: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&sta320>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog_in>;
+			frame-master = <&dailink_master_analog_in>;
+			mclk-fs = <256>;
+
+			dailink_master_analog_in: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&wm8782>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&xo_audio>;
+};
+
+&spi {
+	dac@2 {
+		compatible = "ti,dac7512";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&rotary {
+	status = "okay";
+};
+
+&pxai2c1 {
+	sta320: codec@1a {
+		compatible = "st,sta32x";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sta320_pins>;
+		clocks = <&xo_audio>;
+		clock-names = "xti";
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		Vdda-supply = <&reg_3v3>;
+		Vdd3-supply = <&reg_3v3>;
+		Vcc-supply = <&reg_va_30v0>;
+		#sound-dai-cells = <0>;
+		st,thermal-warning-adjustment;
+		st,thermal-warning-recovery;
+		st,fault-detect-recovery;
+		st,drop-compensation-ns = <80>;
+		st,max-power-use-mpcc;
+		st,invalid-input-detect-mute;
+		/* 2 (half-bridge) and 1 (full-bridge) on-board power */
+		st,output-conf = /bits/ 8 <0x1>;
+		st,ch1-output-mapping = /bits/ 8 <0>;
+		st,ch2-output-mapping = /bits/ 8 <1>;
+		st,ch3-output-mapping = /bits/ 8 <2>;
+		st,needs_esd_watchdog;
+	};
+};
+
+&pinctrl {
+	xo_audio_pins: xo-audio-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* ENABLE */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	sta320_pins: sta320-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* CODEC_RESET	*/
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+	};
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
new file mode 100644
index 000000000..36e20cbf8
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "pxa300-raumfeld-common.dtsi"
+#include "pxa300-raumfeld-tuneable-clock.dtsi"
+
+/ {
+	model = "Raumfeld Speaker S (PXA3xx)";
+	compatible = "raumfeld,raumfeld-speaker-s-pxa303", "marvell,pxa300";
+};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
new file mode 100644
index 000000000..561483b93
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/maxim,max9485.h>
+
+/ {
+	xo_27mhz: oscillator-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-accuracy = <100>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Raumfeld Speaker";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&dailink_master_analog>;
+			frame-master = <&dailink_master_analog>;
+			mclk-fs = <256>;
+
+			dailink_master_analog: cpu {
+				sound-dai = <&ssp_dai0>;
+			};
+
+			codec {
+				sound-dai = <&cs4270>;
+			};
+		};
+	};
+};
+
+&ssp_dai0 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&ssp_dai1 {
+	clocks = <&max9485 MAX9485_CLKOUT1>;
+};
+
+&pxai2c1 {
+	cs4270: codec@48 {
+		compatible = "cirrus,cs4270";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cs4270_pins>;
+		reg = <0x48>;
+		va-supply = <&reg_va_5v0>;
+		vd-supply = <&reg_3v3>;
+		vlc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio 120 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	max9485: clock-generator@63 {
+		compatible = "maxim,max9485";
+		pinctrl-names = "default";
+		pinctrl-0 = <&max9485_pins>;
+		reg = <0x63>;
+		vdd-supply = <&reg_3v3>;
+		clock-names = "xclk";
+		clocks = <&xo_27mhz>;
+		reset-gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <1>;
+	};
+};
+
+&pinctrl {
+	cs4270_pins: cs4270-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(120) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+
+	max9485_pins: max9485-pins {
+		pinctrl-single,pins = <
+			MFP_PIN_PXA300(111) MFP_AF0	/* RESET */
+		>;
+		pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+	};
+};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
new file mode 100644
index 000000000..d19674812
--- /dev/null
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+
+#define MFP_PIN_PXA300(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+#define MFP_PIN_PXA300_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 0)
+
+#define MFP_PIN_PXA310(gpio)				\
+	((gpio <= 2) ? (0x00b4 + 4 * gpio) :		\
+	 (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) :	\
+	 (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 (gpio <= 262) ? 0 :				\
+	 (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) :	\
+	 0)
+#define MFP_PIN_PXA310_2(gpio)				\
+	((gpio <= 1) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 6) ? (0x2dc + 4 * gpio) :		\
+	 (gpio <= 10) ? (0x52c + 4 * gpio) :		\
+	 0)
+
+#define MFP_PIN_PXA320(gpio)				\
+	((gpio <= 4) ? (0x0124 + 4 * gpio) :		\
+	 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) :	\
+	 (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) :	\
+	 (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) :	\
+	 (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) :	\
+	 (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) :	\
+	 (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) :	\
+	 (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) :	\
+	 (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) :	\
+	 0)
+#define MFP_PIN_PXA320_2(gpio)				\
+	((gpio <= 3) ? (0x674 + 4 * gpio) :		\
+	 (gpio <= 5) ? (0x284 + 4 * gpio) :		\
+	 0)
+
+/*
+ * MFP Alternate functions for pins having a gpio.
+ * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 >
+ */
+#define MFP_AF0		(0 << 0)
+#define MFP_AF1		(1 << 0)
+#define MFP_AF2		(2 << 0)
+#define MFP_AF3		(3 << 0)
+#define MFP_AF4		(4 << 0)
+#define MFP_AF5		(5 << 0)
+#define MFP_AF6		(6 << 0)
+
+/*
+ * MFP drive strength functions for pins.
+ * Example of use: pinctrl-single,drive-strength = MFP_DS03X;
+ */
+#define MFP_DSMSK	(0x7 << 10)
+#define MFP_DS01X	< (0x0 << 10) MFP_DSMSK >
+#define MFP_DS02X	< (0x1 << 10) MFP_DSMSK >
+#define MFP_DS03X	< (0x2 << 10) MFP_DSMSK >
+#define MFP_DS04X	< (0x3 << 10) MFP_DSMSK >
+#define MFP_DS06X	< (0x4 << 10) MFP_DSMSK >
+#define MFP_DS08X	< (0x5 << 10) MFP_DSMSK >
+#define MFP_DS10X	< (0x6 << 10) MFP_DSMSK >
+#define MFP_DS13X	< (0x7 << 10) MFP_DSMSK >
+
+/*
+ * MFP bias pull mode for pins.
+ * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
+ */
+#define MPF_PULL_MSK	(0x7 << 13)
+#define MPF_PULL_DOWN	< (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
+#define MPF_PULL_UP	< (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
+
+/*
+ * MFP low power mode for pins.
+ * Example of use:
+ *   pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
+ *
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFP_LPM(x)		< (x) MFP_LPM_MSK >
+
+#define MFP_LPM_MSK		0xe1f0
+#define MFP_LPM_INPUT		0x0000
+#define MFP_LPM_DRIVE_LOW	0x2000
+#define MFP_LPM_DRIVE_HIGH	0x4100
+#define MFP_LPM_PULL_LOW	0x2080
+#define MFP_LPM_PULL_HIGH	0x4180
+#define MFP_LPM_FLOAT		0x0080
+
+#define MFP_LPM_EDGE_NONE	0x0000
+#define MFP_LPM_EDGE_RISE	0x0010
+#define MFP_LPM_EDGE_FALL	0x0020
+#define MFP_LPM_EDGE_BOTH	0x0030
+
+/ {
+	model = "Marvell PXA3xx familiy SoC";
+	compatible = "marvell,pxa3xx";
+
+	pxabus {
+		pdma: dma-controller@40000000 {
+			compatible = "marvell,pdma-1.0";
+			reg = <0x40000000 0x10000>;
+			interrupts = <25>;
+			#dma-channels = <32>;
+			#dma-cells = <2>;
+			#dma-requests = <100>;
+			status = "okay";
+		};
+
+		pwri2c: i2c@40f500c0 {
+			compatible = "mrvl,pwri2c";
+			reg = <0x40f500c0 0x30>;
+			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@43100000 {
+			compatible = "marvell,pxa3xx-nand-controller";
+			reg = <0x43100000 90>;
+			interrupts = <45>;
+			clocks = <&clks CLK_NAND>;
+			clock-names = "core";
+			dmas = <&pdma 97 3>;
+			dma-names = "data";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <56>;
+		};
+
+		pinctrl: pinctrl@40e10000 {
+			compatible = "pinconf-single";
+			reg = <0x40e10000 0xffff>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa3xx-gpio";
+			reg = <0x40e00000 0x10000>;
+			clocks = <&clks CLK_GPIO>;
+			gpio-ranges = <&pinctrl 0 0 128>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupts = <8>, <9>, <10>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			clocks = <&clks CLK_MMC1>;
+			dmas = <&pdma 21 3
+				&pdma 22 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@42000000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42000000 0x1000>;
+			interrupts = <41>;
+			clocks = <&clks CLK_MMC2>;
+			dmas = <&pdma 93 3
+				&pdma 94 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		mmc2: mmc@42500000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x42500000 0x1000>;
+			interrupts = <55>;
+			clocks = <&clks CLK_MMC3>;
+			dmas = <&pdma 46 3
+				&pdma 47 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usb0: usb@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			clocks = <&clks CLK_USBH>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+			status = "disabled";
+		};
+
+		ssp1: ssp@41000000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41000000 0x40>;
+			interrupts = <24>;
+			clocks = <&clks CLK_SSP1>;
+			status = "disabled";
+		};
+
+		ssp2: ssp@41700000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41700000 0x40>;
+			interrupts = <16>;
+			clocks = <&clks CLK_SSP2>;
+			status = "disabled";
+		};
+
+		ssp3: ssp@41900000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41900000 0x40>;
+			interrupts = <0>;
+			clocks = <&clks CLK_SSP3>;
+			status = "disabled";
+		};
+
+		ssp4: ssp@41a00000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41a00000 0x40>;
+			interrupts = <13>;
+			clocks = <&clks CLK_SSP4>;
+			status = "disabled";
+		};
+
+		timer@40a00000 {
+			compatible = "marvell,pxa-timer";
+			reg = <0x40a00000 0x20>;
+			interrupts = <26>;
+			clocks = <&clks CLK_OSTIMER>;
+			status = "okay";
+		};
+
+		gcu: display-controller@54000000 {
+			compatible = "marvell,pxa300-gcu";
+			reg = <0x54000000 0x1000>;
+			interrupts = <39>;
+			clocks = <&clks CLK_PXA300_GCU>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: clocks {
+			compatible = "marvell,pxa300-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
new file mode 100644
index 000000000..ce7615886
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+/dts-v1/;
+#include "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			BUCK3 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO5 {
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO12 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO13 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			LDO14 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
new file mode 100644
index 000000000..352a39357
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <dt-bindings/clock/marvell,pxa910.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: serial@d4017000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4017000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA910_CLK_UART0>;
+				resets = <&soc_clocks PXA910_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: serial@d4018000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4018000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA910_CLK_UART1>;
+				resets = <&soc_clocks PXA910_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: serial@d4036000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0xd4036000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <59>;
+				clocks = <&soc_clocks PXA910_CLK_UART2>;
+				resets = <&soc_clocks PXA910_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks PXA910_CLK_GPIO>;
+				resets = <&soc_clocks PXA910_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI0>;
+				resets = <&soc_clocks PXA910_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI1>;
+				resets = <&soc_clocks PXA910_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5>, <6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA910_CLK_RTC>;
+				resets = <&soc_clocks PXA910_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa910-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>,
+			      <0xd403b000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc", "apbcp";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
new file mode 100644
index 000000000..4e6c50d45
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -0,0 +1,960 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm APQ8060 Dragonboard";
+	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		/* Main power of the board: 3.7V */
+		vph: regulator-fixed {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-name = "VPH";
+			regulator-type = "voltage";
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		/* GPIO controlled ethernet power regulator */
+		dragon_veth: xc622a331mrg {
+			compatible = "regulator-fixed";
+			regulator-name = "XC6222A331MR-G";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vph>;
+			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_veth_gpios>;
+			regulator-always-on;
+		};
+
+		/* VDDvario fixed regulator */
+		dragon_vario: nds332p {
+			compatible = "regulator-fixed";
+			regulator-name = "NDS332P";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&pm8058_s3>;
+		};
+
+		/* This is a levelshifter for SDCC5 */
+		dragon_vio_txb: txb0104rgyr {
+			compatible = "regulator-fixed";
+			regulator-name = "Dragon SDCC levelshifter";
+			vin-supply = <&pm8058_l14>;
+			regulator-always-on;
+		};
+	};
+
+	/*
+	 * Capella CM3605 light and proximity sensor mounted directly
+	 * on the sensor board.
+	 */
+	cm3605 {
+		compatible = "capella,cm3605";
+		vdd-supply = <&pm8058_l14>; // 2.85V
+		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
+		capella,aset-resistance-ohms = <100000>;
+		/* Trig on both edges - getting close or far away */
+		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
+		/* MPP05 analog input to the XOADC */
+		io-channels = <&xoadc 0x00 0x05>;
+		io-channel-names = "aout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
+	};
+
+	soc {
+		pinctrl@800000 {
+			/* eMMMC pins, all 8 data lines connected */
+			dragon_sdcc1_pins: sdcc1 {
+				mux {
+					pins = "gpio159", "gpio160", "gpio161",
+					     "gpio162", "gpio163", "gpio164",
+					     "gpio165", "gpio166", "gpio167",
+					     "gpio168";
+					     function = "sdc1";
+				};
+				clk {
+					pins = "gpio167"; /* SDC1 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio168"; /* SDC1 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC1 D0 to D7 */
+					pins = "gpio159", "gpio160", "gpio161", "gpio162",
+					     "gpio163", "gpio164", "gpio165", "gpio166";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			/*
+			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+			 * configuration.
+			 */
+			dragon_sdcc3_pins: sdcc3 {
+				clk {
+					pins = "sdc3_clk";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				cmd {
+					pins = "sdc3_cmd";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+				data {
+					pins = "sdc3_data";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+
+			/* Second SD card slot pins */
+			dragon_sdcc5_pins: sdcc5 {
+				mux {
+					pins = "gpio95", "gpio96", "gpio97",
+					    "gpio98", "gpio99", "gpio100";
+					function = "sdc5";
+				};
+				clk {
+					pins = "gpio97"; /* SDC5 CLK */
+					drive-strength = <16>;
+					bias-disable;
+				};
+				cmd {
+					pins = "gpio95"; /* SDC5 CMD */
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+				data {
+					/* SDC5 D0 to D3 */
+					pins = "gpio96", "gpio98", "gpio99", "gpio100";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			dragon_gsbi8_i2c_pins: gsbi8_i2c {
+				mux {
+					pins = "gpio64", "gpio65";
+					function = "gsbi8";
+				};
+				pinconf {
+					pins = "gpio64", "gpio65";
+					drive-strength = <16>;
+					/* These have external pull-up 2.2kOhm to 1.8V */
+					bias-disable;
+				};
+			};
+
+			dragon_gsbi12_i2c_pins: gsbi12_i2c {
+				mux {
+					pins = "gpio115", "gpio116";
+					function = "gsbi12";
+				};
+				pinconf {
+					pins = "gpio115", "gpio116";
+					drive-strength = <16>;
+					/* These have external pull-up 4.7kOhm to 1.8V */
+					bias-disable;
+				};
+			};
+
+			/* Primary serial port uart 0 pins */
+			dragon_gsbi12_serial_pins: gsbi12_serial {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "gsbi12";
+				};
+				tx {
+					pins = "gpio117";
+					drive-strength = <8>;
+					bias-disable;
+				};
+				rx {
+					pins = "gpio118";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			dragon_ebi2_pins: ebi2 {
+				/*
+				 * Pins used by EBI2 on the Dragonboard, actually only
+				 * CS2 is used by a real peripheral. CS0 is just
+				 * routed to a test point.
+				 */
+				mux0 {
+					pins =
+					    /* "gpio39", CS1A_N this is not good to mux */
+					    "gpio40", /* CS2A_N */
+					    "gpio134"; /* CS0_N testpoint TP29 */
+					function = "ebi2cs";
+				};
+				mux1 {
+					pins =
+					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+					    "gpio123", "gpio124", "gpio125", "gpio126",
+					    "gpio127", "gpio128", "gpio129", "gpio130",
+					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+					    "gpio135", "gpio136", "gpio137", "gpio138",
+					    "gpio139", "gpio140", "gpio141", "gpio142",
+					    "gpio143", "gpio144", "gpio145", "gpio146",
+					    "gpio147", "gpio148", "gpio149", "gpio150",
+					    "gpio151", /* EBI2_OE_N */
+					    "gpio153", /* EBI2_ADV */
+					    "gpio157"; /* EBI2_WE_N */
+					function = "ebi2";
+				};
+			};
+
+			/* Interrupt line for the KXSD9 accelerometer */
+			dragon_kxsd9_gpios: kxsd9 {
+				irq {
+					pins = "gpio57"; /* IRQ line */
+					bias-pull-up;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				keypad@148 {
+					linux,keymap = <
+					MATRIX_KEY(0, 0, KEY_MENU)
+					MATRIX_KEY(0, 2, KEY_1)
+					MATRIX_KEY(0, 3, KEY_4)
+					MATRIX_KEY(0, 4, KEY_7)
+					MATRIX_KEY(1, 0, KEY_UP)
+					MATRIX_KEY(1, 1, KEY_LEFT)
+					MATRIX_KEY(1, 2, KEY_DOWN)
+					MATRIX_KEY(1, 3, KEY_5)
+					MATRIX_KEY(1, 3, KEY_8)
+					MATRIX_KEY(2, 0, KEY_HOME)
+					MATRIX_KEY(2, 1, KEY_REPLY)
+					MATRIX_KEY(2, 2, KEY_2)
+					MATRIX_KEY(2, 3, KEY_6)
+					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+					MATRIX_KEY(3, 1, KEY_RIGHT)
+					MATRIX_KEY(3, 2, KEY_3)
+					MATRIX_KEY(3, 3, KEY_9)
+					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+					MATRIX_KEY(4, 1, KEY_BACK)
+					MATRIX_KEY(4, 2, KEY_CAMERA)
+					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+					>;
+					keypad,num-rows = <6>;
+					keypad,num-columns = <5>;
+				};
+
+				gpio@150 {
+					dragon_ethernet_gpios: ethernet-gpios {
+						pinconf {
+							pins = "gpio7";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_bmp085_gpios: bmp085-gpios {
+						pinconf {
+							pins = "gpio16";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_mpu3050_gpios: mpu3050-gpios {
+						pinconf {
+							pins = "gpio17";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc3_gpios: sdcc3-gpios {
+						pinconf {
+							pins = "gpio22";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_sdcc5_gpios: sdcc5-gpios {
+						pinconf {
+							pins = "gpio26";
+							function = "normal";
+							input-enable;
+							bias-pull-up;
+							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_ak8975_gpios: ak8975-gpios {
+						pinconf {
+							pins = "gpio33";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_cm3605_gpios: cm3605-gpios {
+						/* Pin 34 connected to the proxy IRQ */
+						pinconf_gpio34 {
+							pins = "gpio34";
+							function = "normal";
+							input-enable;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+						/* Pin 35 connected to ASET */
+						pinconf_gpio35 {
+							pins = "gpio35";
+							function = "normal";
+							output-high;
+							bias-disable;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+					dragon_veth_gpios: veth-gpios {
+						pinconf {
+							pins = "gpio40";
+							function = "normal";
+							bias-disable;
+							drive-push-pull;
+						};
+					};
+				};
+
+				mpps@50 {
+					dragon_cm3605_mpps: cm3605-mpps {
+						pinconf {
+							pins = "mpp5";
+							function = "analog";
+							input-enable;
+							bias-high-impedance;
+							/* Let's use channel 5 */
+							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+							power-source = <PM8058_GPIO_S3>;
+						};
+					};
+				};
+
+				xoadc@197 {
+					/* Reference voltage 2.2 V */
+					xoadc-ref-supply = <&pm8058_l18>;
+
+					/* Board-specific channels */
+					mpp5@5 {
+						/* Connected to AOUT of ALS sensor */
+						reg = <0x00 0x05>;
+					};
+					mpp6@6 {
+						/* Connected to test point TP43 */
+						reg = <0x00 0x06>;
+					};
+					mpp7@7 {
+						/* Connected to battery thermistor */
+						reg = <0x00 0x07>;
+					};
+					mpp8@8 {
+						/* Connected to battery ID detector */
+						reg = <0x00 0x08>;
+					};
+					mpp9@9 {
+						/* Connected to XO thermistor */
+						reg = <0x00 0x09>;
+					};
+				};
+
+				led@48 {
+					/*
+					 * The keypad LED @0x48 is routed to
+					 * the sensor board where it is
+					 * connected to an infrared LED
+					 * SFH4650 (60mW, @850nm) next to the
+					 * ambient light and proximity sensor
+					 * Capella Microsystems CM3605.
+					 */
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					label = "pm8058:infrared:proximitysensor";
+					default-state = "off";
+					linux,default-trigger = "cm3605";
+				};
+				led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					label = "pm8058:red";
+					default-state = "off";
+				};
+				led@132 {
+					/*
+					 * This is actually green too on my
+					 * board, but documented as yellow.
+					 */
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					label = "pm8058:yellow";
+					default-state = "off";
+					linux,default-trigger = "mmc0";
+				};
+				led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					label = "pm8058:green";
+					default-state = "on";
+					linux,default-trigger = "heartbeat";
+				};
+			};
+		};
+
+		gsbi@19800000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@19880000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+
+				eeprom@52 {
+					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					vcc-supply = <&pm8058_s3>;
+					pagesize = <64>;
+				};
+				wm8903: wm8903@1a {
+					/* This Woolfson Micro device has an unrouted interrupt line */
+					compatible = "wlf,wm8903";
+					reg = <0x1a>;
+
+					AVDD-supply = <&pm8058_l16>;
+					CPVDD-supply = <&pm8058_l16>;
+					DBVDD-supply = <&pm8058_s3>;
+					DCVDD-supply = <&pm8058_l0>;
+
+					gpio-controller;
+					#gpio-cells = <2>;
+
+					micdet-cfg = <0>;
+					micdet-delay = <100>;
+					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+				};
+			};
+		};
+
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@19c40000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+			};
+
+			i2c@19c80000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+
+				ak8975@c {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0c>;
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_ak8975_gpios>;
+					vid-supply = <&pm8058_lvs0>; // 1.8V
+					vdd-supply = <&pm8058_l14>; // 2.85V
+				};
+				bmp085@77 {
+					compatible = "bosch,bmp085";
+					reg = <0x77>;
+					interrupt-parent = <&pm8058_gpio>;
+					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_bmp085_gpios>;
+					vddd-supply = <&pm8058_lvs0>; // 1.8V
+					vdda-supply = <&pm8058_l14>; // 2.85V
+				};
+				mpu3050@68 {
+					compatible = "invensense,mpu3050";
+					reg = <0x68>;
+					/*
+					 * GPIO17 is pulled high by a 10k
+					 * resistor to VLOGIC so needs to be
+					 * active low/falling edge.
+					 */
+					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&dragon_mpu3050_gpios>;
+					vlogic-supply = <&pm8058_lvs0>; // 1.8V
+					vdd-supply = <&pm8058_l14>; // 2.85V
+
+					/*
+					 * The MPU-3050 acts as a hub for the
+					 * accelerometer.
+					 */
+					i2c-gate {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						kxsd9@18 {
+							compatible = "kionix,kxsd9";
+							reg = <0x18>;
+							interrupt-parent = <&tlmm>;
+							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+							pinctrl-names = "default";
+							pinctrl-0 = <&dragon_kxsd9_gpios>;
+							iovdd-supply = <&pm8058_lvs0>; // 1.8V
+							vdd-supply = <&pm8058_l14>; // 2.85V
+						};
+					};
+				};
+			};
+		};
+
+		external-bus@1a100000 {
+			/* The EBI2 will instantiate first, then populate its children */
+			status = "ok";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dragon_ebi2_pins>;
+
+			/*
+			 * An on-board SMSC LAN9221 chip for "debug ethernet",
+			 * which is actually just an ordinary ethernet on the
+			 * EBI2. This has a 25MHz chrystal next to it, so no
+			 * clocking is needed.
+			 */
+			ethernet-ebi2@2,0 {
+				compatible = "smsc,lan9221", "smsc,lan9115";
+				reg = <2 0x0 0x100>;
+				/*
+				 * The second interrupt is the PME interrupt
+				 * for network wakeup, connected to the TLMM.
+				 */
+				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+				vdd33a-supply = <&dragon_veth>;
+				vddvario-supply = <&dragon_vario>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_ethernet_gpios>;
+				phy-mode = "mii";
+				reg-io-width = <2>;
+				smsc,force-external-phy;
+				/* IRQ on edge falling = active low */
+				smsc,irq-active-low;
+				smsc,irq-push-pull;
+
+				/*
+				 * SLOW chipselect config
+				 * Delay 9 cycles (140ns@64MHz) between SMSC
+				 * LAN9221 Ethernet controller reads and writes
+				 * on CS2.
+				 */
+				qcom,xmem-recovery-cycles = <0>;
+				qcom,xmem-write-hold-cycles = <3>;
+				qcom,xmem-write-delta-cycles = <31>;
+				qcom,xmem-read-delta-cycles = <28>;
+				qcom,xmem-write-wait-cycles = <9>;
+				qcom,xmem-read-wait-cycles = <9>;
+			};
+		};
+
+		rpm@104000 {
+			/*
+			 * Set up of the PMIC RPM regulators for this board
+			 * PM8901 supplies "preliminary regulators" whatever
+			 * that means
+			 */
+			pm8901-regulators {
+				vdd_l0-supply = <&pm8901_s4>;
+				vdd_l1-supply = <&vph>;
+				vdd_l2-supply = <&vph>;
+				vdd_l3-supply = <&vph>;
+				vdd_l4-supply = <&vph>;
+				vdd_l5-supply = <&vph>;
+				vdd_l6-supply = <&vph>;
+				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				lvs0_in-supply = <&pm8058_s3>;
+				lvs1_in-supply = <&pm8901_s4>;
+				lvs2_in-supply = <&pm8058_l0>;
+				lvs3_in-supply = <&pm8058_s2>;
+				mvs_in-supply = <&pm8058_s3>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+
+				/* s0 and s1 are SAW regulators controlled over SPM */
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* LVS0 thru 3 and mvs0 are just switches */
+				lvs0 {
+					regulator-always-on;
+				};
+				lvs1 { };
+				lvs2 { };
+				lvs3 { };
+				mvs0 {};
+
+			};
+
+			pm8058-regulators {
+				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+				vdd_l2_l11_l12-supply = <&vph>;
+				vdd_l3_l4_l5-supply = <&vph>;
+				vdd_l6_l7-supply = <&vph>;
+				vdd_l8-supply = <&vph>;
+				vdd_l9-supply = <&vph>;
+				vdd_l10-supply = <&vph>;
+				vdd_l13_l16-supply = <&pm8058_s4>;
+				vdd_l14_l15-supply = <&vph>;
+				vdd_l17_l18-supply = <&vph>;
+				vdd_l19_l20-supply = <&vph>;
+				vdd_l21-supply = <&pm8058_s3>;
+				vdd_l22-supply = <&pm8058_s3>;
+				vdd_l23_l24_l25-supply = <&pm8058_s3>;
+				vdd_s0-supply = <&vph>;
+				vdd_s1-supply = <&vph>;
+				vdd_s2-supply = <&vph>;
+				vdd_s3-supply = <&vph>;
+				vdd_s4-supply = <&vph>;
+				vdd_ncp-supply = <&vph>;
+
+				l0 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l2 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l4 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l6 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+				l7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l8 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <3050000>;
+					bias-pull-down;
+				};
+				l9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l10 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l11 {
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					bias-pull-down;
+				};
+				l12 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+				l13 {
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					bias-pull-down;
+				};
+				l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+				l15 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+				l16 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l17 {
+					// 1.5V according to schematic
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+				l18 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					bias-pull-down;
+				};
+				l19 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					bias-pull-down;
+				};
+				l20 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+				l21 {
+					// 1.1 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+				l22 {
+					// 1.2 V according to schematic
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+				l23 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l24 {
+					// Unused
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+				l25 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				s0 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1325000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s1 {
+					// regulator-min-microvolt = <500000>;
+					// regulator-max-microvolt = <1250000>;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s2 {
+					// 1.3 V according to schematic
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+				s3 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+				s4 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				/* LVS0 and LVS1 are just switches */
+				lvs0 {
+					bias-pull-down;
+				};
+				lvs1 {
+					bias-pull-down;
+				};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+		amba {
+			/* Internal 3.69 GiB eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc1_pins>;
+				vmmc-supply = <&pm8901_l5>;
+				vqmmc-supply = <&pm8901_lvs0>;
+			};
+
+			/* External micro SD card, directly connected, pulled up to 2.85 V */
+			sdcc@12180000 {
+				status = "okay";
+				/* Enable SSBI GPIO 22 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+			};
+
+			/*
+			 * Second external micro SD card, using two TXB104RGYR levelshifters
+			 * to lift from 1.8 V to 2.85 V
+			 */
+			sdcc@12200000 {
+				status = "okay";
+				/* Enable SSBI GPIO 26 as input, use for card detect */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+				vmmc-supply = <&pm8058_l14>;
+				vqmmc-supply = <&dragon_vio_txb>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 000000000..a701d4bac
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@88d00000{
+			compatible = "ramoops";
+			reg = <0x88d00000 0x100000>;
+			record-size     = <0x00020000>;
+			console-size    = <0x00020000>;
+			ftrace-size     = <0x00020000>;
+		};
+	};
+
+	ext_3p3v: regulator-fixed@1 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		volume_up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		volume_down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vin_lvs2-supply = <&pm8921_s1>;
+
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				vdd_ncp-supply = <&pm8921_l6>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				/* msm otg HSUSB_VDDCX */
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				/*
+				 * msm_sdcc.1-sdc-vdd_io
+				 * tabla2x-slim-CDC_VDDA_RX
+				 * tabla2x-slim-CDC_VDDA_TX
+				 * tabla2x-slim-CDC_VDD_CP
+				 * tabla2x-slim-VDDIO_CDC
+				 */
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				/* mipi_dsi.1-dsi1_pll_vdda */
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* msm_otg-HSUSB_3p3 */
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				/* msm_otg-HSUSB_1p8 */
+				l4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/* msm_sdcc.1-sdc_vdd */
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				/* mipi_dsi.1-dsi1_avdd */
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+					regulator-always-on;
+				};
+
+				/* pwm_power for backlight */
+				l17 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				/* camera, qdsp6 */
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/*
+				 * tabla2x-slim-CDC_VDDA_A_1P2V
+				 * tabla2x-slim-VDDD_CDC_D
+				 */
+				l25 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+				/*
+				 * mipi_dsi.1-dsi1_vddio
+				 * pil_riva-pll_vdd
+				 */
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		mdp@5100000 {
+			status = "okay";
+			ports {
+				port@1 {
+					mdp_dsi1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			status = "okay";
+			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+			vdd-supply = <&pm8921_l8>;
+			vddio-supply = <&pm8921_lvs7>;
+			avdd-supply = <&pm8921_l11>;
+			vcss-supply = <&ext_3p3v>;
+
+			panel@0 {
+				reg = <0>;
+				compatible = "jdi,lt070me05000";
+
+				vddp-supply = <&pm8921_l17>;
+				iovcc-supply = <&pm8921_lvs7>;
+
+				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+			ports {
+				port@0 {
+					dsi0_in: endpoint {
+						remote-endpoint = <&mdp_dsi1_out>;
+					};
+				};
+
+				port@1 {
+					dsi0_out: endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+		};
+
+		dsi-phy@4700200 {
+			status = "okay";
+			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
+
+				trackpad@10 {
+					compatible = "elan,ekth3500";
+					reg = <0x10>;
+					interrupt-parent = <&tlmm_pinmux>;
+					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+				};
+			};
+		};
+
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+
+				bq27541@55 {
+					compatible = "ti,bq27541";
+					reg = <0x55>;
+				};
+
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+			dr_mode = "otg";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l4>;
+				};
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+		};
+
+		imem@2a03f000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal	= <0x77665501>;
+				mode-bootloader	= <0x77665500>;
+				mode-recovery	= <0x77665502>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 000000000..209eb21ce
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "CompuLab CM-QS600";
+	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwrseq {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			card_detect: card_detect {
+				mux {
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+
+		rpm@108000 {
+			regulators {
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
+			};
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "ok";
+			dr_mode = "otg";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l4>;
+				};
+			};
+		};
+
+		usb@12520000 {
+			status = "okay";
+			dr_mode = "host";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l23>;
+				};
+			};
+		};
+
+		usb@12530000 {
+			status = "okay";
+			dr_mode = "host";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l23>;
+				};
+			};
+		};
+
+		/* on board fixed 3.3v supply */
+		v3p3_fixed: v3p3 {
+			compatible = "regulator-fixed";
+			regulator-name = "PCIE V3P3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&v3p3_fixed>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+			};
+			/* WLAN */
+			sdcc4: sdcc@121c0000 {
+				status = "okay";
+				vmmc-supply = <&v3p3_fixed>;
+				vqmmc-supply = <&v3p3_fixed>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
new file mode 100644
index 000000000..83aaf4a74
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwrseq {
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&notify_led>;
+
+		led@1 {
+			label = "apq8064:green:user1";
+			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			card_detect: card_detect {
+				mux {
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+
+		rpm@108000 {
+			regulators {
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		ext_3p3v: regulator-fixed@1 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "ext_3p3v";
+			regulator-type = "voltage";
+			startup-delay-us = <0>;
+			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		gsbi3: gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+				status = "okay";
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			/* CAM I2C MIPI-CSI connector */
+			i2c@16380000 {
+				status = "okay";
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+			spi4: spi@1a280000 {
+				status = "okay";
+				num-cs = <1>;
+				cs-gpios = <&tlmm_pinmux 53 0>;
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+			serial@16540000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
+			};
+		};
+
+		sata_phy0: phy@1b400000 {
+			status = "okay";
+		};
+
+		sata0: sata@29000000 {
+			status		= "okay";
+			target-supply	= <&pm8921_s4>;
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+			dr_mode = "otg";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l4>;
+				};
+			};
+		};
+
+		usb@12520000 {
+			status = "okay";
+			dr_mode = "host";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l23>;
+				};
+			};
+		};
+
+		usb@12530000 {
+			status = "okay";
+			dr_mode = "host";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l23>;
+				};
+			};
+		};
+
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&ext_3p3v>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+
+					notify_led: nled {
+						pios {
+							pins = "gpio18";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l6>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+			};
+			/* WLAN */
+			sdcc4: sdcc@121c0000 {
+				status = "okay";
+				vmmc-supply = <&ext_3p3v>;
+				vqmmc-supply = <&pm8921_lvs1>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
+			};
+		};
+
+		hdmi-tx@4a00000 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+			hdmi-mux-supply = <&ext_3p3v>;
+
+			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+
+			ports {
+				port@0 {
+					endpoint {
+						remote-endpoint = <&mdp_dtv_out>;
+					};
+				};
+
+				port@1 {
+					endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		hdmi-phy@4a00400 {
+			status = "okay";
+
+			core-vdda-supply = <&pm8921_hdmi_switch>;
+		};
+
+		mdp@5100000 {
+			status = "okay";
+
+			ports {
+				port@3 {
+					endpoint {
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
new file mode 100644
index 000000000..cbe42c415
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&tlmm_pinmux {
+	sdc4_gpios: sdc4-gpios {
+		pios {
+			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+			function = "sdc4";
+		};
+	};
+
+	sdcc1_pins: sdcc1-pin-active {
+		clk {
+			pins = "sdc1_clk";
+			drive-strengh = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc1_cmd";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc1_data";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_pins: sdcc3-pin-active {
+		clk {
+			pins = "sdc3_clk";
+			drive-strengh = <8>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc3_cmd";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc3_data";
+			drive-strengh = <8>;
+			bias-pull-up;
+		};
+	};
+
+	ps_hold: ps_hold {
+		mux {
+			pins = "gpio78";
+			function = "ps_hold";
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi1_uart_2pins: gsbi1_uart_2pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi1";
+		};
+	};
+
+	gsbi1_uart_4pins: gsbi1_uart_4pins {
+		mux {
+			pins = "gpio18", "gpio19", "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi3";
+		};
+
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins_sleep: i2c3_pins_sleep {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+		};
+
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins_sleep: i2c4_pins_sleep {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c6_pins_sleep: i2c6_pins_sleep {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6_uart_2pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi6_uart_4pins: gsbi6_uart_4pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi7_uart_2pins: gsbi7_uart_2pins {
+		mux {
+			pins = "gpio82", "gpio83";
+			function = "gsbi7";
+		};
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins {
+		mux {
+			pins = "gpio82", "gpio83", "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+	};
+
+	i2c7_pins: i2c7 {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c7_pins_sleep: i2c7_pins_sleep {
+		mux {
+			pins = "gpio84", "gpio85";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio84", "gpio85";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	riva_fm_pin_a: riva-fm-active {
+		pins = "gpio14", "gpio15";
+		function = "riva_fm";
+	};
+
+	riva_bt_pin_a: riva-bt-active {
+		pins = "gpio16", "gpio17";
+		function = "riva_bt";
+	};
+
+	riva_wlan_pin_a: riva-wlan-active {
+		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+		function = "riva_wlan";
+
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+
+	hdmi_pinctrl: hdmi-pinctrl {
+		mux {
+			pins = "gpio70", "gpio71", "gpio72";
+			function = "hdmi";
+		};
+
+		pinconf_ddc {
+			pins = "gpio70", "gpio71";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf_hpd {
+			pins = "gpio72";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000..8bf488fb8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+				rx {
+					pins = "gpio52";
+					function = "gsbi5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx {
+					pins = "gpio51";
+					function = "gsbi5";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+
+			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+				pins = "gpio26";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+
+		rpm@108000 {
+			regulators {
+				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs_1_3_6-supply = <&pm8921_s4>;
+				vin_lvs_4_5_7-supply = <&pm8921_s4>;
+				vin_ncp-supply = <&pm8921_l6>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_l24-supply = <&pm8921_s1>;
+				vin_l25-supply = <&pm8921_s1>;
+				vin_l27-supply = <&pm8921_s7>;
+				vin_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				l18 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs2 {
+					bias-pull-down;
+				};
+
+				lvs3 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+
+				usb-switch {};
+
+				hdmi-switch {};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					gpio_keys_pin_a: gpio-keys-pin-active {
+						pins = "gpio3", "gpio4", "gpio29", "gpio35";
+						function = "normal";
+
+						bias-pull-up;
+						drive-push-pull;
+						input-enable;
+						power-source = <2>;
+						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+						qcom,pull-up-strength = <0>;
+					};
+				};
+			};
+		};
+
+		usb@12500000 {
+			status = "okay";
+			dr_mode = "otg";
+			ulpi {
+				phy {
+					v3p3-supply = <&pm8921_l3>;
+					v1p8-supply = <&pm8921_l4>;
+				};
+			};
+		};
+
+		gsbi@1a200000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@1a240000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi5_uart_pin_a>;
+			};
+		};
+
+		amba {
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l6>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+			};
+		};
+
+		riva-pil@3204000 {
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
new file mode 100644
index 000000000..46ed48f02
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
new file mode 100644
index 000000000..3f1002c34
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -0,0 +1,1764 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@8f000000 {
+			reg = <0x8f000000 0x700000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <400>;
+				exit-latency-us = <900>;
+				min-residency-us = <3000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	clocks {
+		cxo_board: cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board: pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		modem@0 {
+			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 3>;
+			qcom,smd-edge = <0>;
+
+			status = "disabled";
+		};
+
+		q6@1 {
+			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 15>;
+			qcom,smd-edge = <1>;
+
+			status = "disabled";
+		};
+
+		dsps@3 {
+			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
+			qcom,smd-edge = <3>;
+
+			status = "disabled";
+		};
+
+		riva@6 {
+			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&l2cc 8 25>;
+			qcom,smd-edge = <6>;
+
+			status = "disabled";
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&l2cc 8 4>;
+		qcom,ipc-2 = <&l2cc 8 14>;
+		qcom,ipc-3 = <&l2cc 8 23>;
+		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		q6_smsm: q6@2 {
+			reg = <2>;
+			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@3 {
+			reg = <3>;
+			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		dsps_smsm: dsps@4 {
+			reg = <4>;
+			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-apq8064";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
+		};
+	};
+
+
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xoadc 0x00 0x01>, /* Battery */
+			    <&xoadc 0x00 0x02>, /* DC in (charger) */
+			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+			    <&xoadc 0x00 0x0b>, /* Die temperature */
+			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			    <&xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		tlmm_pinmux: pinctrl@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm_pinmux 0 0 90>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ps_hold>;
+		};
+
+		sfpb_wrapper_mutex: syscon@1200000 {
+			compatible = "syscon";
+			reg = <0x01200000 0x8000>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: power-controller@2089000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: power-controller@2099000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: power-controller@20a9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: power-controller@20b9000 {
+			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		sps_sic_non_secure: sps-sic-non-secure@12100000 {
+			compatible	= "syscon";
+			reg		= <0x12100000 0x10000>;
+		};
+
+		gsbi1: gsbi@12440000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-1 = <&i2c1_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+		};
+
+		gsbi2: gsbi@12480000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi2_i2c: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_pins>;
+				pinctrl-1 = <&i2c2_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-1 = <&i2c3_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-1 = <&i2c4_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi5_default>;
+				pinctrl-1 = <&spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi6: gsbi@16500000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <6>;
+			reg = <0x16500000 0x03>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x100>,
+				      <0x16500000 0x03>;
+				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_pins>;
+				pinctrl-1 = <&i2c6_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c7_pins>;
+				pinctrl-1 = <&i2c7_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>,
+					 <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		ssbi@c00000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00c00000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pm8821: pmic@1 {
+				compatible = "qcom,pm8821";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8821_mpps: mpps@50 {
+					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+					reg = <0x50>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <74 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8921_gpio: gpio@150 {
+
+					compatible = "qcom,pm8921-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pm8921_gpio 0 0 44>;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8921_mpps: mpps@50 {
+					compatible = "qcom,pm8921-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts =
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				xoadc: xoadc@197 {
+					compatible = "qcom,pm8921-adc";
+					reg = <0x197>;
+					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+					#io-channel-cells = <2>;
+
+					vcoin: adc-channel@00 {
+						reg = <0x00 0x00>;
+					};
+					vbat: adc-channel@01 {
+						reg = <0x00 0x01>;
+					};
+					dcin: adc-channel@02 {
+						reg = <0x00 0x02>;
+					};
+					vph_pwr: adc-channel@04 {
+						reg = <0x00 0x04>;
+					};
+					batt_therm: adc-channel@08 {
+						reg = <0x00 0x08>;
+					};
+					batt_id: adc-channel@09 {
+						reg = <0x00 0x09>;
+					};
+					usb_vbus: adc-channel@0a {
+						reg = <0x00 0x0a>;
+					};
+					die_temp: adc-channel@0b {
+						reg = <0x00 0x0b>;
+					};
+					ref_625mv: adc-channel@0c {
+						reg = <0x00 0x0c>;
+					};
+					ref_1250mv: adc-channel@0d {
+						reg = <0x00 0x0d>;
+					};
+					chg_temp: adc-channel@0e {
+						reg = <0x00 0x0e>;
+					};
+					ref_muxoff: adc-channel@0f {
+						reg = <0x00 0x0f>;
+					};
+				};
+			};
+		};
+
+		qfprom: qfprom@700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064";
+			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-apq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mmcc: clock-controller@4000000 {
+			compatible = "qcom,mmcc-apq8064";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-apq8064";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+
+				pm8921_s1: s1 {};
+				pm8921_s2: s2 {};
+				pm8921_s3: s3 {};
+				pm8921_s4: s4 {};
+				pm8921_s7: s7 {};
+				pm8921_s8: s8 {};
+
+				pm8921_l1: l1 {};
+				pm8921_l2: l2 {};
+				pm8921_l3: l3 {};
+				pm8921_l4: l4 {};
+				pm8921_l5: l5 {};
+				pm8921_l6: l6 {};
+				pm8921_l7: l7 {};
+				pm8921_l8: l8 {};
+				pm8921_l9: l9 {};
+				pm8921_l10: l10 {};
+				pm8921_l11: l11 {};
+				pm8921_l12: l12 {};
+				pm8921_l14: l14 {};
+				pm8921_l15: l15 {};
+				pm8921_l16: l16 {};
+				pm8921_l17: l17 {};
+				pm8921_l18: l18 {};
+				pm8921_l21: l21 {};
+				pm8921_l22: l22 {};
+				pm8921_l23: l23 {};
+				pm8921_l24: l24 {};
+				pm8921_l25: l25 {};
+				pm8921_l26: l26 {};
+				pm8921_l27: l27 {};
+				pm8921_l28: l28 {};
+				pm8921_l29: l29 {};
+
+				pm8921_lvs1: lvs1 {};
+				pm8921_lvs2: lvs2 {};
+				pm8921_lvs3: lvs3 {};
+				pm8921_lvs4: lvs4 {};
+				pm8921_lvs5: lvs5 {};
+				pm8921_lvs6: lvs6 {};
+				pm8921_lvs7: lvs7 {};
+
+				pm8921_usb_switch: usb-switch {};
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {};
+			};
+		};
+
+		usb1: usb@12500000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12500000 0x200>,
+			      <0x12500200 0x200>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS1_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs1_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb1 0>;
+					reset-names = "por";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb@12520000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12520000 0x200>,
+			      <0x12520200 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS3_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs3_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs3_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb3 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		usb4: usb@12530000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x12530000 0x200>,
+			      <0x12530200 0x200>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
+			assigned-clock-rates = <60000000>;
+			resets = <&gcc USB_HS4_RESET>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			ahb-burst-config = <0>;
+			phys = <&usb_hs4_phy>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs4_phy: phy {
+					compatible = "qcom,usb-hs-phy-apq8064",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&sleep_clk>, <&cxo_board>;
+					clock-names = "sleep", "ref";
+					resets = <&usb4 0>;
+					reset-names = "por";
+				};
+			};
+		};
+
+		sata_phy0: phy@1b400000 {
+			compatible	= "qcom,apq8064-sata-phy";
+			status		= "disabled";
+			reg		= <0x1b400000 0x200>;
+			reg-names	= "phy_mem";
+			clocks		= <&gcc SATA_PHY_CFG_CLK>;
+			clock-names	= "cfg";
+			#phy-cells	= <0>;
+		};
+
+		sata0: sata@29000000 {
+			compatible		= "qcom,apq8064-ahci", "generic-ahci";
+			status			= "disabled";
+			reg			= <0x29000000 0x180>;
+			interrupts		= <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
+						<&gcc SATA_H_CLK>,
+						<&gcc SATA_A_CLK>,
+						<&gcc SATA_RXOOB_CLK>,
+						<&gcc SATA_PMALIVE_CLK>;
+			clock-names		= "slave_iface",
+						"iface",
+						"bus",
+						"rxoob",
+						"core_pmalive";
+
+			assigned-clocks		= <&gcc SATA_RXOOB_CLK>,
+						<&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates	= <100000000>, <100000000>;
+
+			phys			= <&sata_phy0>;
+			phy-names		= "sata-phy";
+			ports-implemented	= <0x1>;
+		};
+
+		/* Temporary fixed regulator */
+		sdcc1bam:dma@12402000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc3bam:dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc4bam:dma@121c2000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x121c2000 0x8000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				pinctrl-names	= "default";
+				pinctrl-0	= <&sdcc1_pins>;
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x2000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x2000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <192000000>;
+				no-1-8-v;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc4: sdcc@121c0000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x121c0000 0x2000>;
+				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdc4_gpios>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-apq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gpu: adreno-3xx@4300000 {
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
+			reg = <0x04300000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core_clk",
+			    "iface_clk",
+			    "mem_clk",
+			    "mem_iface_clk";
+			clocks =
+			    <&mmcc GFX3D_CLK>,
+			    <&mmcc GFX3D_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>,
+			    <&mmcc MMSS_IMEM_AHB_CLK>;
+
+			iommus = <&gfx3d 0
+				  &gfx3d 1
+				  &gfx3d 2
+				  &gfx3d 3
+				  &gfx3d 4
+				  &gfx3d 5
+				  &gfx3d 6
+				  &gfx3d 7
+				  &gfx3d 8
+				  &gfx3d 9
+				  &gfx3d 10
+				  &gfx3d 11
+				  &gfx3d 12
+				  &gfx3d 13
+				  &gfx3d 14
+				  &gfx3d 15
+				  &gfx3d 16
+				  &gfx3d 17
+				  &gfx3d 18
+				  &gfx3d 19
+				  &gfx3d 20
+				  &gfx3d 21
+				  &gfx3d 22
+				  &gfx3d 23
+				  &gfx3d 24
+				  &gfx3d 25
+				  &gfx3d 26
+				  &gfx3d 27
+				  &gfx3d 28
+				  &gfx3d 29
+				  &gfx3d 30
+				  &gfx3d 31
+				  &gfx3d1 0
+				  &gfx3d1 1
+				  &gfx3d1 2
+				  &gfx3d1 3
+				  &gfx3d1 4
+				  &gfx3d1 5
+				  &gfx3d1 6
+				  &gfx3d1 7
+				  &gfx3d1 8
+				  &gfx3d1 9
+				  &gfx3d1 10
+				  &gfx3d1 11
+				  &gfx3d1 12
+				  &gfx3d1 13
+				  &gfx3d1 14
+				  &gfx3d1 15
+				  &gfx3d1 16
+				  &gfx3d1 17
+				  &gfx3d1 18
+				  &gfx3d1 19
+				  &gfx3d1 20
+				  &gfx3d1 21
+				  &gfx3d1 22
+				  &gfx3d1 23
+				  &gfx3d1 24
+				  &gfx3d1 25
+				  &gfx3d1 26
+				  &gfx3d1 27
+				  &gfx3d1 28
+				  &gfx3d1 29
+				  &gfx3d1 30
+				  &gfx3d1 31>;
+
+			qcom,gpu-pwrlevels {
+				compatible = "qcom,gpu-pwrlevels";
+				qcom,gpu-pwrlevel@0 {
+					qcom,gpu-freq = <450000000>;
+				};
+				qcom,gpu-pwrlevel@1 {
+					qcom,gpu-freq = <27000000>;
+				};
+			};
+		};
+
+		mmss_sfpb: syscon@5700000 {
+			compatible = "syscon";
+			reg = <0x5700000 0x70>;
+		};
+
+		dsi0: mdss_dsi@4700000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			label = "MDSS DSI CTRL->0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x04700000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				<&mmcc DSI_S_AHB_CLK>,
+				<&mmcc AMP_AHB_CLK>,
+				<&mmcc DSI_CLK>,
+				<&mmcc DSI1_BYTE_CLK>,
+				<&mmcc DSI_PIXEL_CLK>,
+				<&mmcc DSI1_ESC_CLK>;
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
+
+			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
+					<&mmcc DSI1_ESC_SRC>,
+					<&mmcc DSI_SRC>,
+					<&mmcc DSI_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi0_phy 0>,
+						<&dsi0_phy 0>,
+						<&dsi0_phy 1>,
+						<&dsi0_phy 1>;
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi0_phy>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi0_out: endpoint {
+					};
+				};
+			};
+		};
+
+
+		dsi0_phy: dsi-phy@4700200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			reg = <0x04700200 0x100>,
+				<0x04700300 0x200>,
+				<0x04700500 0x5c>;
+			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+			clock-names = "iface_clk", "ref";
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				 <&pxo_board>;
+		};
+
+
+		mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		mdp_port1: iommu@7600000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07600000 0x100000>;
+			interrupts =
+			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <2>;
+		};
+
+		gfx3d: iommu@7c00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07c00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		gfx3d1: iommu@7d00000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "iommu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc GFX3D_AXI_CLK>;
+			reg = <0x07d00000 0x100000>;
+			interrupts =
+			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ncb = <3>;
+		};
+
+		pcie: pci@1b500000 {
+			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+		};
+
+		hdmi: hdmi-tx@4a00000 {
+			compatible = "qcom,hdmi-tx-8960";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
+			reg = <0x04a00000 0x2f0>;
+			reg-names = "core_physical";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc HDMI_APP_CLK>,
+				 <&mmcc HDMI_M_AHB_CLK>,
+				 <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "core_clk",
+				      "master_iface_clk",
+				      "slave_iface_clk";
+
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					hdmi_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					hdmi_out: endpoint {
+					};
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@4a00400 {
+			compatible = "qcom,hdmi-phy-8960";
+			reg = <0x4a00400 0x60>,
+			      <0x4a00500 0x100>;
+			reg-names = "hdmi_phy",
+				    "hdmi_pll";
+
+			clocks = <&mmcc HDMI_S_AHB_CLK>;
+			clock-names = "slave_iface_clk";
+			#phy-cells = <0>;
+		};
+
+		mdp: mdp@5100000 {
+			compatible = "qcom,mdp4";
+			reg = <0x05100000 0xf0000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mmcc MDP_CLK>,
+				 <&mmcc MDP_AHB_CLK>,
+				 <&mmcc MDP_AXI_CLK>,
+				 <&mmcc MDP_LUT_CLK>,
+				 <&mmcc HDMI_TV_CLK>,
+				 <&mmcc MDP_TV_CLK>;
+			clock-names = "core_clk",
+				      "iface_clk",
+				      "bus_clk",
+				      "lut_clk",
+				      "hdmi_clk",
+				      "tv_clk";
+
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2
+				  &mdp_port1 0
+				  &mdp_port1 2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp_lvds_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mdp_dsi1_out: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					mdp_dsi2_out: endpoint {
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					mdp_dtv_out: endpoint {
+					};
+				};
+			};
+		};
+
+		riva: riva-pil@3204000 {
+			compatible = "qcom,riva-pil";
+
+			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal";
+
+			memory-region = <&wcnss_mem>;
+
+			vddcx-supply = <&pm8921_s3>;
+			vddmx-supply = <&pm8921_l24>;
+			vddpx-supply = <&pm8921_s4>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3660";
+
+				clocks = <&cxo_board>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8921_l4>;
+				vddrfa-supply = <&pm8921_s2>;
+				vddpa-supply = <&pm8921_l10>;
+				vdddig-supply = <&pm8921_lvs2>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&l2cc 8 25>;
+				qcom,smd-edge = <6>;
+
+				label = "riva";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&riva>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		etb@1a01000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x1a01000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@1a03000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x1a03000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@1a04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x1a04000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 2 - connected to STM component
+				 * 3 - not-connected
+				 * 6 - not-connected
+				 * 7 - not-connected
+				 */
+				port@0 {
+					reg = <0>;
+					funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@4 {
+					reg = <4>;
+					funnel_in4: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@5 {
+					reg = <5>;
+					funnel_in5: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etm@1a1c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@1a1d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@1a1e000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@1a1f000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_in5>;
+					};
+				};
+			};
+		};
+	};
+};
+#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
new file mode 100644
index 000000000..244f04e19
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+
+/ {
+	model = "Qualcomm APQ8074 Dragonboard";
+	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		usid0 = &pm8941_0;
+		usid4 = &pm8841_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f991e000 {
+			status = "ok";
+		};
+
+		sdhci@f9824900 {
+			bus-width = <8>;
+			non-removable;
+			status = "ok";
+
+			vmmc-supply = <&pm8941_l20>;
+			vqmmc-supply = <&pm8941_s3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_pin_a>;
+		};
+
+		sdhci@f98a4900 {
+			cd-gpios = <&msmgpio 62 0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+			bus-width = <4>;
+			status = "ok";
+
+			vmmc-supply = <&pm8941_l21>;
+			vqmmc-supply = <&pm8941_l13>;
+		};
+
+		usb@f9a55000 {
+			status = "ok";
+			phys = <&usb_hs2_phy>;
+			phy-select = <&tcsr 0xb000 1>;
+			extcon = <&smbb>, <&usb_id>;
+			vbus-supply = <&chg_otg>;
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ulpi {
+				phy@b {
+					status = "ok";
+					v3p3-supply = <&pm8941_l24>;
+					v1p8-supply = <&pm8941_l6>;
+					extcon = <&smbb>;
+					qcom,init-seq = /bits/ 8 <0x1 0x63>;
+				};
+			};
+		};
+
+
+		pinctrl@fd510000 {
+			i2c11_pins: i2c11 {
+				mux {
+					pins = "gpio83", "gpio84";
+					function = "blsp_i2c11";
+				};
+			};
+
+			spi8_default: spi8_default {
+				mosi {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+
+			sdhc1_pin_a: sdhc1-pin-active {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+				pins = "gpio62";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc2_pin_a: sdhc2-pin-active {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@f9967000 {
+			status = "okay";
+			clock-frequency = <200000>;
+			pinctrl-0 = <&i2c11_pins>;
+			pinctrl-names = "default";
+
+			eeprom: eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+				pagesize = <32>;
+				read-only;
+			};
+		};
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vin_5vs-supply = <&pm8941_5v>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
new file mode 100644
index 000000000..44cd72f1b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8084.dtsi"
+#include "qcom-pma8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ8084/IFC6540";
+	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+
+		sdhci@f9824900 {
+			bus-width = <8>;
+			non-removable;
+			status = "okay";
+		};
+
+		sdhci@f98a4900 {
+			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+			bus-width = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
new file mode 100644
index 000000000..c6b668024
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8084.dtsi"
+#include "qcom-pma8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084-MTP";
+	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
new file mode 100644
index 000000000..bf6a03506
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_mem: smem_region@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		memory-region = <&smem_mem>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-apq8084";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+		};
+
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x80>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,apq8084-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 147>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f9824900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		sdhci@f98a4900 {
+			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-apq8084";
+				qcom,smd-channels = "rpm_requests";
+
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+
+					pma8084_s1: s1 {};
+					pma8084_s2: s2 {};
+					pma8084_s3: s3 {};
+					pma8084_s4: s4 {};
+					pma8084_s5: s5 {};
+					pma8084_s6: s6 {};
+					pma8084_s7: s7 {};
+					pma8084_s8: s8 {};
+					pma8084_s9: s9 {};
+					pma8084_s10: s10 {};
+					pma8084_s11: s11 {};
+					pma8084_s12: s12 {};
+
+					pma8084_l1: l1 {};
+					pma8084_l2: l2 {};
+					pma8084_l3: l3 {};
+					pma8084_l4: l4 {};
+					pma8084_l5: l5 {};
+					pma8084_l6: l6 {};
+					pma8084_l7: l7 {};
+					pma8084_l8: l8 {};
+					pma8084_l9: l9 {};
+					pma8084_l10: l10 {};
+					pma8084_l11: l11 {};
+					pma8084_l12: l12 {};
+					pma8084_l13: l13 {};
+					pma8084_l14: l14 {};
+					pma8084_l15: l15 {};
+					pma8084_l16: l16 {};
+					pma8084_l17: l17 {};
+					pma8084_l18: l18 {};
+					pma8084_l19: l19 {};
+					pma8084_l20: l20 {};
+					pma8084_l21: l21 {};
+					pma8084_l22: l22 {};
+					pma8084_l23: l23 {};
+					pma8084_l24: l24 {};
+					pma8084_l25: l25 {};
+					pma8084_l26: l26 {};
+					pma8084_l27: l27 {};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
new file mode 100644
index 000000000..0d92f1bc3
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -0,0 +1,22 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
new file mode 100644
index 000000000..418f9a022
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -0,0 +1,113 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+	compatible = "qcom,ipq4019";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		rng@22000 {
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			serial_pins: serial_pinmux {
+				mux {
+					pins = "gpio60", "gpio61";
+					function = "blsp_uart0";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio55", "gpio56", "gpio57";
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio54";
+				};
+				pinconf {
+					pins = "gpio55", "gpio56", "gpio57";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				pinconf_cs {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		blsp_dma: dma@7884000 {
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 54 0>;
+
+			mx25l25635e@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "mx25l25635e";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		cryptobam: dma@8e04000 {
+			status = "ok";
+		};
+
+		crypto@8e3a000 {
+			status = "ok";
+		};
+
+		watchdog@b017000 {
+			status = "ok";
+		};
+
+		wifi@a000000 {
+			status = "ok";
+		};
+
+		wifi@a800000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
new file mode 100644
index 000000000..7a96f300b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
+	compatible = "qcom,ipq4019-dk04.1-c1";
+
+	soc {
+		dma@7984000 {
+			status = "ok";
+		};
+
+		qpic-nand@79b0000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
new file mode 100644
index 000000000..2d1c4c6e4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
+	compatible = "qcom,ipq4019-ap-dk04.1-c3";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
new file mode 100644
index 000000000..7c1eb1963
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256MB */
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+					"gpio57", "gpio58", "gpio59",
+					"gpio60", "gpio62", "gpio63",
+					"gpio64", "gpio65", "gpio66",
+					"gpio67", "gpio68", "gpio69";
+				function = "qpic";
+			};
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7884000 {
+			status = "ok";
+		};
+
+		spi@78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		qpic-nand@79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 000000000..8c7ef6537
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+	compatible = "qcom,ipq4019-ap-dk07.1-c1";
+
+	soc {
+		pci@40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		spi@78b6000 {
+			status = "ok";
+		};
+
+		pinctrl@1000000 {
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9",
+					"gpio10", "gpio11";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi@78b5000 {
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
new file mode 100644
index 000000000..af7a9028d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
+	compatible = "qcom,ipq4019-ap-dk07.1-c2";
+
+	soc {
+		pinctrl@1000000 {
+			serial_1_pins: serial1-pinmux {
+				pins = "gpio8", "gpio9";
+				function = "blsp_uart1";
+				bias-disable;
+			};
+		};
+
+		serial@78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
new file mode 100644
index 000000000..9f1a5a668
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		pinctrl@1000000 {
+			serial_0_pins: serial0-pinmux {
+				pins = "gpio16", "gpio17";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-pinmux {
+				pins = "gpio20", "gpio21";
+				function = "blsp_i2c0";
+				bias-disable;
+			};
+
+			nand_pins: nand-pins {
+				pins = "gpio53", "gpio55", "gpio56",
+				       "gpio57", "gpio58", "gpio59",
+				       "gpio60", "gpio62", "gpio63",
+				       "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68", "gpio69";
+				function = "qpic";
+                        };
+		};
+
+		serial@78af000 {
+			pinctrl-0 = <&serial_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7884000 {
+			status = "ok";
+		};
+
+		i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		dma@7984000 {
+			status = "ok";
+		};
+
+		qpic-nand@79b0000 {
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 000000000..037bb8a9b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	model = "Qualcomm Technologies, Inc. IPQ4019";
+	compatible = "qcom,ipq4019";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+
+		smem_region: smem@87e00000 {
+			reg = <0x87e00000 0x080000>;
+			no-map;
+		};
+
+		tz@87e80000 {
+			reg = <0x87e80000 0x180000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		spi0 = &blsp1_spi1;
+		spi1 = &blsp1_spi2;
+		i2c0 = &blsp1_i2c3;
+		i2c1 = &blsp1_i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			reg = <0x0>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			reg = <0x1>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			reg = <0x2>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			reg = <0x3>;
+			clocks = <&gcc GCC_APPS_CLK_SRC>;
+			clock-frequency = <0>;
+			clock-latency = <256000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-48000000 {
+			opp-hz = /bits/ 64 <48000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <256000>;
+		};
+		opp-716000000 {
+			opp-hz = /bits/ 64 <716000000>;
+			clock-latency-ns = <256000>;
+ 		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq4019";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <48000000>;
+		always-on;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			<0x0b002000 0x1000>;
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq4019";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x1800000 0x60000>;
+		};
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x22000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq4019-pinctrl";
+			reg = <0x01000000 0x300000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 100>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdhci: sdhci@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			bus-width = <8>;
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_DCD_XO_CLK>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		blsp_dma: dma@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x78b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		cryptobam: dma@8e04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x08e04000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto@8e3a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x08e3a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		acc0: clock-controller@b088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc1: clock-controller@b098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc2: clock-controller@b0a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		acc3: clock-controller@b0b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+		};
+
+		saw0: regulator@b089000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
+                        regulator;
+		};
+
+		saw1: regulator@b099000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@b0a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@b0b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+			regulator;
+		};
+
+		saw_l2: regulator@b012000 {
+			compatible = "qcom,saw2";
+			reg = <0xb012000 0x1000>;
+			regulator;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+			reg = <0xb017000 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+			status = "disabled";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x4ab000 0x4>;
+		};
+
+		pcie0: pci@40000000 {
+			compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
+			reg =  <0x40000000 0xf1d
+				0x40000f20 0xa8
+				0x80000 0x2000
+				0x40100000 0x1000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc GCC_PCIE_AHB_CLK>,
+				 <&gcc GCC_PCIE_AXI_M_CLK>,
+				 <&gcc GCC_PCIE_AXI_S_CLK>;
+			clock-names = "aux",
+				      "master_bus",
+				      "slave_bus";
+
+			resets = <&gcc PCIE_AXI_M_ARES>,
+				 <&gcc PCIE_AXI_S_ARES>,
+				 <&gcc PCIE_PIPE_ARES>,
+				 <&gcc PCIE_AXI_M_VMIDMT_ARES>,
+				 <&gcc PCIE_AXI_S_XPU_ARES>,
+				 <&gcc PCIE_PARF_XPU_ARES>,
+				 <&gcc PCIE_PHY_ARES>,
+				 <&gcc PCIE_AXI_M_STICKY_ARES>,
+				 <&gcc PCIE_PIPE_STICKY_ARES>,
+				 <&gcc PCIE_PWR_ARES>,
+				 <&gcc PCIE_AHB_ARES>,
+				 <&gcc PCIE_PHY_AHB_ARES>;
+			reset-names = "axi_m",
+				      "axi_s",
+				      "pipe",
+				      "axi_m_vmid",
+				      "axi_s_xpu",
+				      "parf",
+				      "phy",
+				      "axi_m_sticky",
+				      "pipe_sticky",
+				      "pwr",
+				      "ahb",
+				      "phy_ahb";
+
+			status = "disabled";
+		};
+
+		qpic_bam: dma@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x7984000 0x1a000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		nand: qpic-nand@79b0000 {
+			compatible = "qcom,ipq4019-nand";
+			reg = <0x79b0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+
+			nand@0 {
+				reg = <0>;
+
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		wifi0: wifi@a000000 {
+			compatible = "qcom,ipq4019-wifi";
+			reg = <0xa000000 0x200000>;
+			resets = <&gcc WIFI0_CPU_INIT_RESET>,
+				 <&gcc WIFI0_RADIO_SRIF_RESET>,
+				 <&gcc WIFI0_RADIO_WARM_RESET>,
+				 <&gcc WIFI0_RADIO_COLD_RESET>,
+				 <&gcc WIFI0_CORE_WARM_RESET>,
+				 <&gcc WIFI0_CORE_COLD_RESET>;
+			reset-names = "wifi_cpu_init", "wifi_radio_srif",
+				      "wifi_radio_warm", "wifi_radio_cold",
+				      "wifi_core_warm", "wifi_core_cold";
+			clocks = <&gcc GCC_WCSS2G_CLK>,
+				 <&gcc GCC_WCSS2G_REF_CLK>,
+				 <&gcc GCC_WCSS2G_RTC_CLK>;
+			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+				      "wifi_wcss_rtc";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+					   "msi4",  "msi5",  "msi6",  "msi7",
+					   "msi8",  "msi9", "msi10", "msi11",
+					  "msi12", "msi13", "msi14", "msi15",
+					  "legacy";
+			status = "disabled";
+		};
+
+		wifi1: wifi@a800000 {
+			compatible = "qcom,ipq4019-wifi";
+			reg = <0xa800000 0x200000>;
+			resets = <&gcc WIFI1_CPU_INIT_RESET>,
+				 <&gcc WIFI1_RADIO_SRIF_RESET>,
+				 <&gcc WIFI1_RADIO_WARM_RESET>,
+				 <&gcc WIFI1_RADIO_COLD_RESET>,
+				 <&gcc WIFI1_CORE_WARM_RESET>,
+				 <&gcc WIFI1_CORE_COLD_RESET>;
+			reset-names = "wifi_cpu_init", "wifi_radio_srif",
+				      "wifi_radio_warm", "wifi_radio_cold",
+				      "wifi_core_warm", "wifi_core_cold";
+			clocks = <&gcc GCC_WCSS5G_CLK>,
+				 <&gcc GCC_WCSS5G_REF_CLK>,
+				 <&gcc GCC_WCSS5G_RTC_CLK>;
+			clock-names = "wifi_wcss_cmd", "wifi_wcss_ref",
+				      "wifi_wcss_rtc";
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+					   "msi4",  "msi5",  "msi6",  "msi7",
+					   "msi8",  "msi9", "msi10", "msi11",
+					  "msi12", "msi13", "msi14", "msi15",
+					  "legacy";
+			status = "disabled";
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq4019-mdio";
+			reg = <0x90000 0x64>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+
+			ethphy4: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
new file mode 100644
index 000000000..554c65e7a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+	compatible = "qcom,ipq8064-ap148";
+
+	soc {
+		pinmux@800000 {
+			i2c4_pins: i2c4_pinmux {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				bias-disable;
+			};
+
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54", "gpio65";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			i2c@16380000 {
+				status = "ok";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-names = "default";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
new file mode 100644
index 000000000..33545cf40
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MikroTik RB3011UiAS-RM";
+	compatible = "mikrotik,rb3011";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac3;
+		mdio-gpio0 = &mdio0;
+		mdio-gpio1 = &mdio1;
+	};
+
+	chosen {
+		bootargs = "loglevel=8 console=ttyMSM0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@42000000 {
+		reg = <0x42000000 0x3e000000>;
+		device_type = "memory";
+	};
+
+	mdio0: mdio-0 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio0_pins>;
+		pinctrl-names = "default";
+
+		switch0: switch@10 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsa,member = <0 0>;
+
+			pinctrl-0 = <&sw0_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch0cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "rgmii-id";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw5";
+				};
+			};
+		};
+	};
+
+	mdio1: mdio-1 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio1_pins>;
+		pinctrl-names = "default";
+
+		switch1: switch@14 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsa,member = <1 0>;
+
+			pinctrl-0 = <&sw1_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch1cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac3>;
+					phy-mode = "sgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw6";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw7";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw8";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw9";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw10";
+				};
+			};
+		};
+	};
+
+	soc {
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				norflash: s25fl016k@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "RouterBoot";
+						reg = <0x0 0x40000>;
+					};
+				};
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led@7 {
+				label = "rb3011:green:user";
+				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&switch0cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&switch1cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi7 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&qcom_pinmux {
+	buttons_pins: buttons_pins {
+		mux {
+			pins = "gpio66";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	leds_pins: leds_pins {
+		mux {
+			pins = "gpio33";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		mux {
+			pins = "gpio0", "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio1_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	sw0_reset_pin: sw0_reset_pin {
+		mux {
+			pins = "gpio16";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+
+	sw1_reset_pin: sw1_reset_pin {
+		mux {
+			pins = "gpio17";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 000000000..e239a0486
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+
+			serial@16340000 {
+				status = "ok";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: m25p80@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "ok";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+			button@2 {
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led@7 {
+				label = "led_usb1";
+				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@8 {
+				label = "led_usb3";
+				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@9 {
+				label = "status_led_fail";
+				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@26 {
+				label = "sata_led";
+				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@53 {
+				label = "status_led_pass";
+				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
new file mode 100644
index 000000000..dca0ed6c8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,791 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm IPQ8064";
+	compatible = "qcom,ipq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nss@40000000 {
+			reg = <0x40000000 0x1000000>;
+			no-map;
+		};
+
+		smem@41000000 {
+			reg = <0x41000000 0x200000>;
+			no-map;
+		};
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq806x", "qcom,scm";
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,ipq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&qcom_pinmux 0 0 69>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pcie0_pins: pcie0_pinmux {
+				mux {
+					pins = "gpio3";
+					function = "pcie1_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie1_pins: pcie1_pinmux {
+				mux {
+					pins = "gpio48";
+					function = "pcie2_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			pcie2_pins: pcie2_pinmux {
+				mux {
+					pins = "gpio63";
+					function = "pcie3_rst";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			leds_pins: leds_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9",
+					       "gpio26", "gpio53";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+			};
+
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <25000000>,
+					  <32768>;
+			clocks = <&sleep_clk>;
+			clock-names = "sleep";
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			serial@12490000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12490000 0x1000>,
+				      <0x12480000 0x1000>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
+
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-ipq8064", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pcie0: pci@1b500000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_CLK>,
+				 <&gcc PCIE_AUX_CLK>,
+				 <&gcc PCIE_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>,
+				 <&gcc PCIE_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie0_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie1: pci@1b700000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b700000 0x1000
+			       0x1b702000 0x80
+			       0x1b800000 0x100
+			       0x31f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_1_A_CLK>,
+				 <&gcc PCIE_1_H_CLK>,
+				 <&gcc PCIE_1_PHY_CLK>,
+				 <&gcc PCIE_1_AUX_CLK>,
+				 <&gcc PCIE_1_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_1_ACLK_RESET>,
+				 <&gcc PCIE_1_HCLK_RESET>,
+				 <&gcc PCIE_1_POR_RESET>,
+				 <&gcc PCIE_1_PCI_RESET>,
+				 <&gcc PCIE_1_PHY_RESET>,
+				 <&gcc PCIE_1_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie1_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie2: pci@1b900000 {
+			compatible = "qcom,pcie-ipq8064";
+			reg = <0x1b900000 0x1000
+			       0x1b902000 0x80
+			       0x1ba00000 0x100
+			       0x35f00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
+
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc PCIE_2_A_CLK>,
+				 <&gcc PCIE_2_H_CLK>,
+				 <&gcc PCIE_2_PHY_CLK>,
+				 <&gcc PCIE_2_AUX_CLK>,
+				 <&gcc PCIE_2_ALT_REF_CLK>;
+			clock-names = "core", "iface", "phy", "aux", "ref";
+
+			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc PCIE_2_ACLK_RESET>,
+				 <&gcc PCIE_2_HCLK_RESET>,
+				 <&gcc PCIE_2_POR_RESET>,
+				 <&gcc PCIE_2_PCI_RESET>,
+				 <&gcc PCIE_2_PHY_RESET>,
+				 <&gcc PCIE_2_EXT_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+			pinctrl-0 = <&pcie2_pins>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+		};
+
+		nss_common: syscon@03000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
+
+		qsgmii_csr: syscon@1bb00000 {
+			compatible = "syscon";
+			reg = <0x1bb00000 0x000001FF>;
+		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <7>;
+			snps,rd_osr_lmt = <7>;
+			snps,blen = <16 0 0 0 0 0 0>;
+		};
+
+		gmac0: ethernet@37000000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37000000 0x200000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE1_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE1_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac1: ethernet@37200000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37200000 0x200000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE2_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE2_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac2: ethernet@37400000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37400000 0x200000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE3_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE3_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac3: ethernet@37600000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37600000 0x200000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE4_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE4_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdcc1bam:dma@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc3bam:dma@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc@12400000 {
+				status          = "disabled";
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg             = <0x12400000 0x2000>;
+				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				max-frequency   = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				mmc-ddr-1_8v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc@12180000 {
+				compatible      = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status          = "disabled";
+				reg             = <0x12180000 0x2000>;
+				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "cmd_irq";
+				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names     = "mclk", "apb_pclk";
+				bus-width       = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency   = <192000000>;
+				#mmc-ddr-1_8v;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
new file mode 100644
index 000000000..942e3a2ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -0,0 +1,281 @@
+/*
+ * Device Tree Source for mangOH Green Board with WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+#include "qcom-mdm9615-wp8548.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MangOH Green with WP8548 Module";
+	compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
+
+	aliases {
+		spi0 = &gsbi3_spi;
+		serial0 = &gsbi4_serial;
+		serial1 = &gsbi5_serial;
+		i2c0 = &gsbi5_i2c;
+		mmc0 = &sdcc1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&msmgpio {
+	/* MangOH GPIO Mapping :
+	 * - 2 : GPIOEXP_INT2
+	 * - 7 : IOT1_GPIO2
+	 * - 8 : IOT0_GPIO4
+	 * - 13: IOT0_GPIO3
+	 * - 21: IOT1_GPIO4
+	 * - 22: IOT2_GPIO1
+	 * - 23: IOT2_GPIO2
+	 * - 24: IOT2_GPIO3
+	 * - 25: IOT1_GPIO1
+	 * - 32: IOT1_GPIO3
+	 * - 33: IOT0_GPIO2
+	 * - 42: IOT0_GPIO1 and SD Card Detect
+	 */
+
+	gpioext1_pins: gpioext1_pins {
+		pins {
+			pins = "gpio2";
+			function = "gpio";
+			input-enable;
+			bias-disable;
+		};
+	};
+
+	sdc_cd_pins: sdc_cd_pins {
+		pins {
+			pins = "gpio42";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&gsbi3_spi {
+	spi@0 {
+		compatible = "swir,mangoh-iotport-spi", "spidev";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&gsbi5_i2c {
+	mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c_iot0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_iot1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_iot2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			usbhub: hub@8 {
+				compatible = "smsc,usb3503a";
+				reg = <0x8>;
+				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
+				initial-mode = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			gpioext0: gpio@3e {
+				/* GPIO Expander 0 Mapping :
+				 * - 0: ARDUINO_RESET_Level shift
+				 * - 1: BattChrgr_PG_N
+				 * - 2: BattGauge_GPIO
+				 * - 3: LED_ON (out active high)
+				 * - 4: ATmega_reset_GPIO
+				 * - 5: X
+				 * - 6: PCM_ANALOG_SELECT (out active high)
+				 * - 7: X
+				 * - 8: Board_rev_res1 (in)
+				 * - 9: Board_rev_res2 (in)
+				 * - 10: UART_EXP1_ENn (out active low / pull-down)
+				 * - 11: UART_EXP1_IN (out pull-down)
+				 * - 12: UART_EXP2_IN (out pull-down)
+				 * - 13: SDIO_SEL (out pull-down)
+				 * - 14: SPI_EXP1_ENn (out active low / pull-down)
+				 * - 15: SPI_EXP1_IN (out pull-down)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3e>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			gpioext1: gpio@3f {
+				/* GPIO Expander 1 Mapping :
+				 * - 0: GPIOEXP_INT1
+				 * - 1: Battery detect
+				 * - 2: GPIO_SCF3_RESET
+				 * - 3: LED_CARD_DETECT_IOT0 (in)
+				 * - 4: LED_CARD_DETECT_IOT1 (in)
+				 * - 5: LED_CARD_DETECT_IOT2 (in)
+				 * - 6: UIM2_PWM_SELECT
+				 * - 7: UIM2_M2_S_SELECT
+				 * - 8: TP900
+				 * - 9: SENSOR_INT1 (in)
+				 * - 10: SENSOR_INT2 (in)
+				 * - 11: CARD_DETECT_IOT0 (in pull-up)
+				 * - 12: CARD_DETECT_IOT2 (in pull-up)
+				 * - 13: CARD_DETECT_IOT1 (in pull-up)
+				 * - 14: GPIOEXP_INT3 (in active low / pull-up)
+				 * - 15: BattChrgr_INT_N
+				 */
+				pinctrl-0 = <&gpioext1_pins>;
+				pinctrl-names = "default";
+
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x3f>;
+				interrupt-parent = <&msmgpio>;
+				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			gpioext2: gpio@70 {
+				/* GPIO Expander 2 Mapping :
+				 * - 0: USB_HUB_INTn
+				 * - 1: HUB_CONNECT
+				 * - 2: GPIO_IOT2_RESET (out active low / pull-up)
+				 * - 3: GPIO_IOT1_RESET (out active low / pull-up)
+				 * - 4: GPIO_IOT0_RESET (out active low / pull-up)
+				 * - 5: TP901
+				 * - 6: TP902
+				 * - 7: TP903
+				 * - 8: UART_EXP2_ENn (out active low / pull-down)
+				 * - 9: PCM_EXP1_ENn (out active low)
+				 * - 10: PCM_EXP1_SEL (out)
+				 * - 11: ARD_FTDI
+				 * - 12: TP904
+				 * - 13: TP905
+				 * - 14: TP906
+				 * - 15: RS232_Enable (out active high / pull-up)
+				 */
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1509q";
+				reg = <0x70>;
+				interrupt-parent = <&gpioext1>;
+				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+				probe-reset;
+
+				gpio-controller;
+				interrupt-controller;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&sdcc1 {
+	pinctrl-0 = <&sdc_cd_pins>;
+	pinctrl-names = "default";
+	disable-wp;
+	cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
new file mode 100644
index 000000000..26b034bd1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Device Tree Source for Sierra Wireless WP8548 Module
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "qcom-mdm9615.dtsi"
+
+/ {
+	model = "Sierra Wireless WP8548 Module";
+	compatible = "swir,wp8548", "qcom,mdm9615";
+
+	memory {
+		device_type = "memory";
+		reg = <0x48000000 0x7F00000>;
+	};
+};
+
+&msmgpio {
+	pinctrl-0 = <&reset_out_pins>;
+	pinctrl-names = "default";
+
+	gsbi3_pins: gsbi3_pins {
+		mux {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi4_pins: gsbi4_pins {
+		mux {
+			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			function = "gsbi4";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_i2c_pins: gsbi5_i2c_pins {
+		pin16 {
+			pins = "gpio16";
+			function = "gsbi5_i2c";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		pin17 {
+			pins = "gpio17";
+			function = "gsbi5_i2c";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	gsbi5_uart_pins: gsbi5_uart_pins {
+		mux {
+			pins = "gpio18", "gpio19";
+			function = "gsbi5_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	reset_out_pins: reset_out_pins {
+		pins {
+			pins = "gpio66";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+};
+
+&pmicgpio {
+	usb_vbus_5v_pins: usb_vbus_5v_pins {
+		pins = "gpio4";
+		function = "normal";
+		output-high;
+		bias-disable;
+		qcom,drive-strength = <1>;
+		power-source = <2>;
+	};
+};
+
+&gsbi3 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_SPI>;
+};
+
+&gsbi3_spi {
+	status = "ok";
+	pinctrl-0 = <&gsbi3_pins>;
+	pinctrl-names = "default";
+	assigned-clocks = <&gcc GSBI3_QUP_CLK>;
+	assigned-clock-rates = <24000000>;
+};
+
+&gsbi4 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+};
+
+&gsbi4_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi4_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5 {
+	status = "ok";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi5_i2c {
+	status = "ok";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&gsbi5_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&gsbi5_serial {
+	status = "ok";
+	pinctrl-0 = <&gsbi5_uart_pins>;
+	pinctrl-names = "default";
+};
+
+&sdcc1 {
+	status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
new file mode 100644
index 000000000..982f3c392
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -0,0 +1,553 @@
+/*
+ * Device Tree Source for Qualcomm MDM9615 SoC
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-mdm9615.h>
+#include <dt-bindings/reset/qcom,gcc-mdm9615.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MDM9615";
+	compatible = "qcom,mdm9615";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		L2: cache-controller@2040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x02040000 0x1000>;
+			arm,data-latency = <2 2 0>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,mdm9615-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 88>;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-mdm9615";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-mdm9615";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible = "syscon";
+			reg = <0x02011000 0x1000>;
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+			assigned-clocks = <&gcc PRNG_CLK>;
+			assigned-clock-rates = <32000000>;
+		};
+
+		gsbi2: gsbi@16100000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <2>;
+			reg = <0x16100000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi2_i2c: i2c@16180000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16180000 0x1000>;
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <3>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi3_spi: spi@16280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi4_serial: serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16480000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				/* QUP clock is not initialized, set rate */
+				assigned-clocks = <&gcc GSBI5_QUP_CLK>;
+				assigned-clock-rates = <24000000>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8018", "qcom,pm8921";
+				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				pmicmpp: mpp@50 {
+					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>,
+						     <28 IRQ_TYPE_NONE>,
+						     <29 IRQ_TYPE_NONE>;
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pmicgpio: gpio@150 {
+					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pmicgpio 0 0 6>;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		sdcc1bam: dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc2bam: dma@12142000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12142000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12180000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC1_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+
+			sdcc2: sdcc@12140000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12140000 0x2000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <48000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+				dma-names = "tx", "rx";
+				assigned-clocks = <&gcc SDC2_CLK>;
+				assigned-clock-rates = <400000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-mdm9615", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-mdm9615";
+			reg = <0x108000 0x1000>;
+
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8018-regulators";
+
+				vin_lvs1-supply = <&pm8018_s3>;
+
+				vdd_l7-supply = <&pm8018_s4>;
+				vdd_l8-supply = <&pm8018_s3>;
+				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+				/* Buck SMPS */
+				pm8018_s1: s1 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s2: s2 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s3: s3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s4: s4 {
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8018_s5: s5 {
+					regulator-always-on;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8018_l2: l2 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l3: l3 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8018_l4: l4 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8018_l5: l5 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l6: l6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8018_l7: l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8018_l8: l8 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8018_l9: l9 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8018_l10: l10 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l11: l11 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l12: l12 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8018_l13: l13 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8018_l14: l14 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8018_lvs1: lvs1 {
+					bias-pull-down;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
new file mode 100644
index 000000000..f01a11b18
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm MSM8660 SURF";
+	compatible = "qcom,msm8660-surf", "qcom,msm8660";
+
+	aliases {
+		serial0 = &gsbi12_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@19c40000 {
+				status = "ok";
+			};
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+		};
+	};
+};
+
+&pm8058 {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_FN_F1)
+			MATRIX_KEY(0, 1, KEY_UP)
+			MATRIX_KEY(0, 2, KEY_LEFT)
+			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+			MATRIX_KEY(1, 0, KEY_FN_F2)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+			MATRIX_KEY(1, 2, KEY_DOWN)
+			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+			MATRIX_KEY(2, 3, KEY_ENTER)
+			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(4, 1, KEY_UP)
+			MATRIX_KEY(4, 2, KEY_LEFT)
+			MATRIX_KEY(4, 3, KEY_HOME)
+			MATRIX_KEY(4, 4, KEY_FN_F3)
+			MATRIX_KEY(5, 0, KEY_CAMERA)
+			MATRIX_KEY(5, 1, KEY_RIGHT)
+			MATRIX_KEY(5, 2, KEY_DOWN)
+			MATRIX_KEY(5, 3, KEY_BACK)
+			MATRIX_KEY(5, 4, KEY_MENU)
+			>;
+		keypad,num-rows = <6>;
+		keypad,num-columns = <5>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 000000000..480fc08cb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,scorpion-mp-pmu";
+		interrupts = <1 9 0x304>;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xoadc 0x00 0x01>, /* Battery */
+			    <&xoadc 0x00 0x02>, /* DC in (charger) */
+			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+			    <&xoadc 0x00 0x0b>, /* Die temperature */
+			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <1 0 0x301>,
+				     <1 1 0x301>,
+				     <1 2 0x301>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x40000>;
+		};
+
+		tlmm: pinctrl@800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 173>;
+			#gpio-cells = <2>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		gsbi6: gsbi@16500000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16500000 0x100>;
+			clocks = <&gcc GSBI6_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi6_serial: serial@16540000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16540000 0x1000>,
+				      <0x16500000 0x1000>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi8: gsbi@19800000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19800000 0x100>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi8_i2c: i2c@19880000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19880000 0x1000>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi12_serial: serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi12_i2c: i2c@19c80000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x19c80000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		external-bus@1a100000 {
+			compatible = "qcom,msm8660-ebi2";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x1a800000 0x00800000>,
+				 <1 0x0 0x1b000000 0x00800000>,
+				 <2 0x0 0x1b800000 0x00800000>,
+				 <3 0x0 0x1d000000 0x08000000>,
+				 <4 0x0 0x1c800000 0x00800000>,
+				 <5 0x0 0x1c000000 0x00800000>;
+			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+			reg-names = "ebi2", "xmem";
+			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+			clock-names = "ebi2x", "ebi2";
+			status = "disabled";
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pm8058: pmic@0 {
+				compatible = "qcom,pm8058";
+				interrupt-parent = <&tlmm>;
+				interrupts = <88 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8058_gpio: gpio@150 {
+					compatible = "qcom,pm8058-gpio",
+						     "qcom,ssbi-gpio";
+					reg = <0x150>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					gpio-ranges = <&pm8058_gpio 0 0 44>;
+					#gpio-cells = <2>;
+
+				};
+
+				pm8058_mpps: mpps@50 {
+					compatible = "qcom,pm8058-mpp",
+						     "qcom,ssbi-mpp";
+					reg = <0x50>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-parent = <&pm8058>;
+					interrupts =
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8058-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8058-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				xoadc: xoadc@197 {
+					compatible = "qcom,pm8058-adc";
+					reg = <0x197>;
+					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+					#io-channel-cells = <2>;
+
+					vcoin: adc-channel@0 {
+						reg = <0x00 0x00>;
+					};
+					vbat: adc-channel@1 {
+						reg = <0x00 0x01>;
+					};
+					dcin: adc-channel@2 {
+						reg = <0x00 0x02>;
+					};
+					ichg: adc-channel@3 {
+						reg = <0x00 0x03>;
+					};
+					vph_pwr: adc-channel@4 {
+						reg = <0x00 0x04>;
+					};
+					usb_vbus: adc-channel@a {
+						reg = <0x00 0x0a>;
+					};
+					die_temp: adc-channel@b {
+						reg = <0x00 0x0b>;
+					};
+					ref_625mv: adc-channel@c {
+						reg = <0x00 0x0c>;
+					};
+					ref_1250mv: adc-channel@d {
+						reg = <0x00 0x0d>;
+					};
+					ref_325mv: adc-channel@e {
+						reg = <0x00 0x0e>;
+					};
+					ref_muxoff: adc-channel@f {
+						reg = <0x00 0x0f>;
+					};
+				};
+
+				rtc@1e8 {
+					compatible = "qcom,pm8058-rtc";
+					reg = <0x1e8>;
+					interrupt-parent = <&pm8058>;
+					interrupts = <39 1>;
+					allow-set-time;
+				};
+
+				vibrator@4a {
+					compatible = "qcom,pm8058-vib";
+					reg = <0x4a>;
+				};
+			};
+		};
+
+		l2cc: clock-controller@2082000 {
+			compatible	= "syscon";
+			reg		= <0x02082000 0x1000>;
+		};
+
+		rpm: rpm@104000 {
+			compatible	= "qcom,rpm-msm8660";
+			reg		= <0x00104000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-msm8660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			pm8901-regulators {
+				compatible = "qcom,rpm-pm8901-regulators";
+
+				pm8901_l0: l0 {};
+				pm8901_l1: l1 {};
+				pm8901_l2: l2 {};
+				pm8901_l3: l3 {};
+				pm8901_l4: l4 {};
+				pm8901_l5: l5 {};
+				pm8901_l6: l6 {};
+
+				/* S0 and S1 Handled as SAW regulators by SPM */
+				pm8901_s2: s2 {};
+				pm8901_s3: s3 {};
+				pm8901_s4: s4 {};
+
+				pm8901_lvs0: lvs0 {};
+				pm8901_lvs1: lvs1 {};
+				pm8901_lvs2: lvs2 {};
+				pm8901_lvs3: lvs3 {};
+
+				pm8901_mvs: mvs {};
+			};
+
+			pm8058-regulators {
+				compatible = "qcom,rpm-pm8058-regulators";
+
+				pm8058_l0: l0 {};
+				pm8058_l1: l1 {};
+				pm8058_l2: l2 {};
+				pm8058_l3: l3 {};
+				pm8058_l4: l4 {};
+				pm8058_l5: l5 {};
+				pm8058_l6: l6 {};
+				pm8058_l7: l7 {};
+				pm8058_l8: l8 {};
+				pm8058_l9: l9 {};
+				pm8058_l10: l10 {};
+				pm8058_l11: l11 {};
+				pm8058_l12: l12 {};
+				pm8058_l13: l13 {};
+				pm8058_l14: l14 {};
+				pm8058_l15: l15 {};
+				pm8058_l16: l16 {};
+				pm8058_l17: l17 {};
+				pm8058_l18: l18 {};
+				pm8058_l19: l19 {};
+				pm8058_l20: l20 {};
+				pm8058_l21: l21 {};
+				pm8058_l22: l22 {};
+				pm8058_l23: l23 {};
+				pm8058_l24: l24 {};
+				pm8058_l25: l25 {};
+
+				pm8058_s0: s0 {};
+				pm8058_s1: s1 {};
+				pm8058_s2: s2 {};
+				pm8058_s3: s3 {};
+				pm8058_s4: s4 {};
+
+				pm8058_lvs0: lvs0 {};
+				pm8058_lvs1: lvs1 {};
+
+				pm8058_ncp: ncp {};
+			};
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x8000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <48000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc2: sdcc@12140000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12140000 0x8000>;
+				interrupts	= <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x8000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+				no-1-8-v;
+			};
+
+			sdcc4: sdcc@121c0000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x121c0000 0x8000>;
+				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				max-frequency	= <48000000>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+			};
+
+			sdcc5: sdcc@12200000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12200000 0x8000>;
+				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8660", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
new file mode 100644
index 000000000..82d5d8267
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@16400000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16440000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+			};
+		};
+
+		rpm@108000 {
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+				vdd_ncp-supply = <&pm8921_l6>;
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l21_l23_l29-supply = <&pm8921_s8>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s2: s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				pm8921_s4: s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s8: s8 {
+					regulator-always-on;
+					regulator-min-microvolt = <2050000>;
+					regulator-max-microvolt = <2050000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				/* PMOS LDO */
+				pm8921_l1: l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				pm8921_l2: l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l5: l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l7: l7 {
+					regulator-always-on;
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l8: l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l9: l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l10: l10 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				pm8921_l11: l11 {
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					bias-pull-down;
+				};
+
+				pm8921_l12: l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				pm8921_l14: l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l15: l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l16: l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l17: l17 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l18: l18 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l21: l21 {
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+
+				pm8921_l22: l22 {
+					regulator-min-microvolt = <2750000>;
+					regulator-max-microvolt = <2750000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l24: l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				pm8921_l25: l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				pm8921_lvs1: lvs1 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs2: lvs2 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs3: lvs3 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs4: lvs4 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs5: lvs5 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
+				pm8921_lvs7: lvs7 {
+					bias-pull-down;
+				};
+
+				pm8921_ncp: ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		gsbi@16000000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_default>;
+			spi@16080000 {
+				status = "ok";
+				eth@0 {
+					compatible = "micrel,ks8851";
+					reg = <0>;
+					interrupt-parent = <&msmgpio>;
+					interrupts = <90 8>;
+					spi-max-frequency = <5400000>;
+					vdd-supply = <&ext_l2>;
+					vdd-io-supply = <&pm8921_lvs6>;
+					reset-gpios = <&msmgpio 89 0>;
+				};
+			};
+		};
+
+		pinctrl@800000 {
+			spi1_default: spi1_default {
+				mux {
+					pins = "gpio6", "gpio7", "gpio9";
+					function = "gsbi1";
+				};
+
+				mosi {
+					pins = "gpio6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				miso {
+					pins = "gpio7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs {
+					pins = "gpio8";
+					drive-strength = <12>;
+					bias-disable;
+					output-low;
+				};
+
+				clk {
+					pins = "gpio9";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		ext_l2: gpio-regulator@91 {
+			compatible = "regulator-fixed";
+			regulator-name = "ext_l2";
+			gpio = <&msmgpio 91 0>;
+			startup-delay-us = <10000>;
+			enable-active-high;
+		};
+	};
+};
+
+&pmicintc {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(0, 3, KEY_CAMERA)
+			>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <5>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 000000000..c197927e7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer",
+				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: pinctrl@800000 {
+			compatible = "qcom,msm8960-pinctrl";
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 152>;
+			#gpio-cells = <2>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-msm8960";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-msm8960";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+			};
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <104 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8921-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x8000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x8000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <192000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+		};
+
+		tcsr: syscon@1a400000 {
+			compatible = "qcom,tcsr-msm8960", "syscon";
+			reg = <0x1a400000 0x100>;
+		};
+
+		gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <1>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <24000000>;
+				cs-gpios = <&msmgpio 8 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
new file mode 100644
index 000000000..d2d48770e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -0,0 +1,410 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+
+/ {
+	model = "Fairphone 2";
+	compatible = "fairphone,fp2", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&pm8941_l18>;
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <3350000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+						regulator-allow-set-load;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	serial@f991e000 {
+		status = "ok";
+	};
+
+	remoteproc@fb21b000 {
+		status = "ok";
+
+		vddmx-supply = <&pm8841_s1>;
+		vddcx-supply = <&pm8841_s2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcnss_pin_a>;
+
+		smd-edge {
+			qcom,remote-pid = <4>;
+			label = "pronto";
+
+			wcnss {
+				status = "ok";
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		wcnss_pin_a: wcnss-pin-active {
+			wlan {
+				pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+				function = "wlan";
+
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			bt {
+				pins = "gpio35", "gpio43", "gpio44";
+				function = "bt";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			fm {
+				pins = "gpio41", "gpio42";
+				function = "fm";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		bus-width = <4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	imem@fe805000 {
+		status = "okay";
+
+		reboot-mode {
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio1", "gpio2", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 000000000..32b474bfe
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		serial1 = &blsp2_uart10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <815000>;
+						regulator-max-microvolt = <900000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+						regulator-allow-set-load;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&soc {
+	serial@f991d000 {
+		status = "ok";
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		i2c1_pins: i2c1 {
+			mux {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c3_pins: i2c3 {
+			mux {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c11_pins: i2c11 {
+			mux {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c12_pins: i2c12 {
+			mux {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		mpu6515_pin: mpu6515 {
+			irq {
+				pins = "gpio73";
+				function = "gpio";
+				bias-disable;
+				input-enable;
+			};
+		};
+
+		touch_pin: touch {
+			int {
+				pins = "gpio5";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+
+			reset {
+				pins = "gpio8";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+
+		panel_pin: panel {
+			te {
+				pins = "gpio12";
+				function = "mdp_vsync";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		bt_pin: bt {
+			hostwake {
+				pins = "gpio42";
+				function = "gpio";
+			};
+
+			devwake {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			shutdown {
+				pins = "gpio41";
+				function = "gpio";
+			};
+		};
+
+		blsp2_uart10_pin_a: blsp2-uart10-pin-active {
+			tx {
+				pins = "gpio53";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio54";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cts {
+				pins = "gpio55";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			rts {
+				pins = "gpio56";
+				function = "blsp_uart10";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		max-frequency = <100000000>;
+		bus-width = <4>;
+		non-removable;
+		vmmc-supply = <&vreg_wlan>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		bcrmf@1 {
+			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			brcm,drive-strength = <10>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_sleep_clk_pin>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	serial@f9960000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp2_uart10_pin_a>;
+
+		bluetooth {
+			compatible = "brcm,bcm43438-bt";
+			max-speed = <3000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&bt_pin>;
+
+			host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c@f9967000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c11_pins>;
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		led-controller@38 {
+			compatible = "ti,lm3630a";
+			status = "ok";
+			reg = <0x38>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				led-sources = <0 1>;
+				label = "lcd-backlight";
+				default-brightness = <200>;
+			};
+		};
+	};
+
+	i2c@f9968000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c12_pins>;
+		clock-frequency = <100000>;
+		qcom,src-freq = <50000000>;
+
+		mpu6515@68 {
+			compatible = "invensense,mpu6515";
+			reg = <0x68>;
+			interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+			vddio-supply = <&pm8941_lvs1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&mpu6515_pin>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ak8963@f {
+					compatible = "asahi-kasei,ak8963";
+					reg = <0x0f>;
+					gpios = <&msmgpio 67 0>;
+					vid-supply = <&pm8941_lvs1>;
+					vdd-supply = <&pm8941_l17>;
+				};
+
+				bmp280@76 {
+					compatible = "bosch,bmp280";
+					reg = <0x76>;
+					vdda-supply = <&pm8941_lvs1>;
+					vddd-supply = <&pm8941_l17>;
+				};
+			};
+		};
+	};
+
+	i2c@f9923000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_pins>;
+		clock-frequency = <100000>;
+		qcom,src-freq = <50000000>;
+
+		charger: bq24192@6b {
+			compatible = "ti,bq24192";
+			reg = <0x6b>;
+			interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+			omit-battery-class;
+
+			usb_otg_vbus: usb-otg-vbus { };
+		};
+	};
+
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@70 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x70>;
+
+			interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touch_pin>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f12@12 {
+				reg = <0x12>;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
+	i2c@f9925000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_pins>;
+		clock-frequency = <100000>;
+		qcom,src-freq = <50000000>;
+
+		avago_apds993@39 {
+			compatible = "avago,apds9930";
+			reg = <0x39>;
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&pm8941_l17>;
+			vddio-supply = <&pm8941_lvs1>;
+			led-max-microamp = <100000>;
+			amstaos,proximity-diodes = <0>;
+		};
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+
+		extcon = <&charger>, <&usb_id>;
+		vbus-supply = <&usb_otg_vbus>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	mdss@fd900000 {
+		status = "ok";
+
+		mdp@fd900000 {
+			status = "ok";
+		};
+
+		dsi@fd922800 {
+			status = "ok";
+
+			vdda-supply = <&pm8941_l2>;
+			vdd-supply = <&pm8941_lvs3>;
+			vddio-supply = <&pm8941_l12>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				port@1 {
+					endpoint {
+						remote-endpoint = <&panel_in>;
+						data-lanes = <0 1 2 3>;
+					};
+				};
+			};
+
+			panel: panel@0 {
+				reg = <0>;
+				compatible = "lg,acx467akm-7";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&panel_pin>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+			};
+		};
+
+		dsi-phy@fd922a00 {
+			status = "ok";
+
+			vddio-supply = <&pm8941_l12>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			wlan_sleep_clk_pin: wl-sleep-clk {
+				pins = "gpio16";
+				function = "func2";
+
+				output-high;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			wlan_regulator_pin: wl-reg-active {
+				pins = "gpio17";
+				function = "normal";
+
+				bias-disable;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			otg {
+				gpio-hog;
+				gpios = <35 GPIO_ACTIVE_HIGH>;
+				output-high;
+				line-name = "otg-gpio";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
new file mode 100644
index 000000000..d4dc98214
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+					status = "okay";
+
+					pma8084_s1: s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s2: s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s3: s3 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_s4: s4 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_s5: s5 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+					};
+
+					pma8084_s6: s6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_l1: l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l2: l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l3: l3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l4: l4 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l5: l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l6: l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l7: l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l8: l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l9: l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l10: l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l11: l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_l12: l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l13: l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l14: l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l15: l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l16: l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					pma8084_l17: l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l18: l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l19: l19 {
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l20: l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-system-load = <200000>;
+					};
+
+					pma8084_l21: l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l22: l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l23: l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					pma8084_l24: l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+					};
+
+					pma8084_l25: l25 {
+						regulator-min-microvolt = <2100000>;
+						regulator-max-microvolt = <2100000>;
+					};
+
+					pma8084_l26: l26 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l27: l27 {
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+
+	/delete-node/ vreg-boost;
+};
+
+&soc {
+	serial@f991e000 {
+		status = "ok";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		home-key {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <4>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pma8084_l20>;
+		vqmmc-supply = <&pma8084_s4>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		/*extcon = <&smbb>, <&usb_id>;*/
+		/*vbus-supply = <&chg_otg>;*/
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pma8084_l6>;
+				v3p3-supply = <&pma8084_l24>;
+
+				/*extcon = <&smbb>;*/
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		i2c6_pins: i2c6 {
+			mux {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	i2c@f9928000 {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_pins>;
+
+		pmic@60 {
+			reg = <0x60>;
+			compatible = "maxim,max77826";
+
+			regulators {
+				max77826_ldo1: LDO1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo2: LDO2 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				max77826_ldo3: LDO3 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo4: LDO4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo5: LDO5 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo6: LDO6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo7: LDO7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo8: LDO8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo9: LDO9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo10: LDO10 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo11: LDO11 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo12: LDO12 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo13: LDO13 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo14: LDO14 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo15: LDO15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_buck: BUCK {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+				};
+
+				max77826_buckboost: BUCKBOOST {
+					regulator-min-microvolt = <3400000>;
+					regulator-max-microvolt = <3400000>;
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pma8084@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PMA8084_GPIO_S4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
new file mode 100644
index 000000000..5669f5f58
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z1 Compact";
+	compatible = "sony,xperia-amami", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@0 {
+		reg = <0 0x40000000>, <0x40000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s4 {
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		bus-width = <4>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+	};
+
+	serial@f991e000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
+
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+			pins = "gpio62";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		 };
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	dma-controller@f9944000 {
+		qcom,controlled-remotely;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		charger@1000 {
+			qcom,fast-charge-safe-current = <1300000>;
+			qcom,fast-charge-current-limit = <1300000>;
+			qcom,dc-current-limit = <1300000>;
+			qcom,fast-charge-safe-voltage = <4400000>;
+			qcom,fast-charge-high-threshold-voltage = <4350000>;
+			qcom,fast-charge-low-threshold-voltage = <3400000>;
+			qcom,auto-recharge-threshold-voltage = <4200000>;
+			qcom,minimum-input-voltage = <4300000>;
+		};
+
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio4", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+
+		coincell@2800 {
+			status = "ok";
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};
+
+	pm8941@1 {
+		wled@d800 {
+			status = "ok";
+
+			qcom,cs-out;
+			qcom,current-limit = <20>;
+			qcom,current-boost-limit = <805>;
+			qcom,switching-freq = <1600>;
+			qcom,ovp = <29>;
+			qcom,num-strings = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
new file mode 100644
index 000000000..701b39671
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
@@ -0,0 +1,643 @@
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z2 Tablet";
+	compatible = "sony,xperia-castor", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+
+						regulator-system-load = <154000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-allow-set-load;
+						regulator-system-load = <500000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_bl_vddio: lcd-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bl_vddio";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		gpio = <&msmgpio 69 0>;
+		enable-active-high;
+
+		vin-supply = <&pm8941_s3>;
+		startup-delay-us = <70000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_backlight_en_pin_a>;
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&soc {
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f9864900 {
+		status = "ok";
+
+		max-frequency = <100000000>;
+		non-removable;
+		vmmc-supply = <&vreg_wlan>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc3_pin_a>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		bcrmf@1 {
+			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			brcm,drive-strength = <10>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_sleep_clk_pin>;
+		};
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		bus-width = <4>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+	};
+
+	serial@f991e000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
+
+		i2c8_pins: i2c8 {
+			mux {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		i2c11_pins: i2c11 {
+			mux {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		lcd_backlight_en_pin_a: lcd-backlight-vddio {
+			pins = "gpio69";
+			drive-strength = <10>;
+			output-low;
+			bias-disable;
+		};
+
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+			pins = "gpio62";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		 };
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc3_pin_a: sdhc3-pin-active {
+			clk {
+				pins = "gpio40";
+				function = "sdc3";
+
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd {
+				pins = "gpio39";
+				function = "sdc3";
+
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+
+			data {
+				pins = "gpio35", "gpio36", "gpio37", "gpio38";
+				function = "sdc3";
+
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		ts_int_pin: synaptics {
+			pin {
+				pins = "gpio86";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
+	};
+
+	i2c@f9964000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupt-parent = <&msmgpio>;
+			interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi-f01@1 {
+				reg = <0x1>;
+				syna,nosleep = <1>;
+			};
+
+			rmi-f11@11 {
+				reg = <0x11>;
+				syna,f11-flip-x = <1>;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
+	i2c@f9967000 {
+		status = "ok";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c11_pins>;
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		lp8566_wled: backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+			power-supply = <&vreg_bl_vddio>;
+
+			bl-name = "backlight";
+			dev-ctrl = /bits/ 8 <0x05>;
+			init-brt = /bits/ 8 <0x3f>;
+			rom_a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0xff>;
+			};
+			rom_a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x3f>;
+			};
+			rom_a2h {
+				rom-addr = /bits/ 8 <0xa2>;
+				rom-val = /bits/ 8 <0x20>;
+			};
+			rom_a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x5e>;
+			};
+			rom_a4h {
+				rom-addr = /bits/ 8 <0xa4>;
+				rom-val = /bits/ 8 <0x02>;
+			};
+			rom_a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x04>;
+			};
+			rom_a6h {
+				rom-addr = /bits/ 8 <0xa6>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+			rom_a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xf7>;
+			};
+			rom_a9h {
+				rom-addr = /bits/ 8 <0xa9>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+			rom_aah {
+				rom-addr = /bits/ 8 <0xaa>;
+				rom-val = /bits/ 8 <0x0f>;
+			};
+			rom_aeh {
+				rom-addr = /bits/ 8 <0xae>;
+				rom-val = /bits/ 8 <0x0f>;
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		charger@1000 {
+			qcom,fast-charge-safe-current = <1500000>;
+			qcom,fast-charge-current-limit = <1500000>;
+			qcom,dc-current-limit = <1800000>;
+			qcom,fast-charge-safe-voltage = <4400000>;
+			qcom,fast-charge-high-threshold-voltage = <4350000>;
+			qcom,fast-charge-low-threshold-voltage = <3400000>;
+			qcom,auto-recharge-threshold-voltage = <4200000>;
+			qcom,minimum-input-voltage = <4300000>;
+		};
+
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			wlan_sleep_clk_pin: wl-sleep-clk {
+				pins = "gpio17";
+				function = "func2";
+
+				output-high;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			wlan_regulator_pin: wl-reg-active {
+				pins = "gpio18";
+				function = "normal";
+
+				bias-disable;
+				power-source = <PM8941_GPIO_S3>;
+			};
+
+			lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+				pins = "gpio20";
+				function = "normal";
+
+				bias-disable;
+				power-source = <PM8941_GPIO_S3>;
+				input-disable;
+				output-low;
+			};
+
+		};
+
+		coincell@2800 {
+			status = "ok";
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
new file mode 100644
index 000000000..611bae9fe
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	memory@0 {
+		reg = <0 0x40000000>, <0x40000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s4 {
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		bus-width = <4>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+	};
+
+	serial@f991e000 {
+		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				touchscreen-inverted-x;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
+
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+			pins = "gpio62";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		 };
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		ts_int_pin: touch-int {
+			pin {
+				pins = "gpio61";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
+	};
+
+	dma-controller@f9944000 {
+		qcom,controlled-remotely;
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		charger@1000 {
+			qcom,fast-charge-safe-current = <1500000>;
+			qcom,fast-charge-current-limit = <1500000>;
+			qcom,dc-current-limit = <1800000>;
+			qcom,fast-charge-safe-voltage = <4400000>;
+			qcom,fast-charge-high-threshold-voltage = <4350000>;
+			qcom,fast-charge-low-threshold-voltage = <3400000>;
+			qcom,auto-recharge-threshold-voltage = <4200000>;
+			qcom,minimum-input-voltage = <4300000>;
+		};
+
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio4", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+
+		coincell@2800 {
+			status = "ok";
+			qcom,rset-ohms = <2100>;
+			qcom,vset-millivolts = <3000>;
+		};
+	};
+
+	pm8941@1 {
+		wled@d800 {
+			status = "ok";
+
+			qcom,cs-out;
+			qcom,current-limit = <20>;
+			qcom,current-boost-limit = <805>;
+			qcom,switching-freq = <1600>;
+			qcom,ovp = <29>;
+			qcom,num-strings = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
new file mode 100644
index 000000000..5f7426fb4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -0,0 +1,1643 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interconnect/qcom,msm8974.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Qualcomm MSM8974";
+	compatible = "qcom,msm8974";
+	interrupt-parent = <&intc>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+
+		tz@fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_PPI 9 0xf04>;
+
+		CPU0: cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SPC>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+
+		idle-states {
+			CPU_SPC: spc {
+				compatible = "qcom,idle-state-spc",
+						"arm,idle-state";
+				entry-latency-us = <150>;
+				exit-latency-us = <200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	adsp-pil {
+		compatible = "qcom,msm8974-adsp-pil";
+
+		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+		cx-supply = <&pm8841_s2>;
+
+		clocks = <&xo_board>;
+		clock-names = "xo";
+
+		memory-region = <&adsp_region>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		smd-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 8>;
+			qcom,smd-edge = <1>;
+
+			label = "lpass";
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+		};
+
+		tcsr: syscon@fd4a0000 {
+			compatible = "syscon";
+			reg = <0xfd4a0000 0x10000>;
+		};
+
+		tcsr_mutex_block: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+		};
+
+		tcsr_mutex: tcsr-mutex {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_block 0 0x80>;
+
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart10: serial@f9960000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9960000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f9824900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		sdhci@f9864900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		sdhci@f98a4900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+			status = "disabled";
+		};
+
+		otg: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs1_phy: phy@a {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+
+				usb_hs2_phy: phy@b {
+					compatible = "qcom,usb-hs-phy-msm8974",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
+					reset-names = "phy", "por";
+					status = "disabled";
+				};
+			};
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			cx-supply = <&pm8841_s2>;
+			mss-supply = <&pm8841_s3>;
+			mx-supply = <&pm8841_s1>;
+			pll-supply = <&pm8941_l12>;
+
+			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		pronto: remoteproc@fb21b000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_region>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			vddpx-supply = <&pm8941_s3>;
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3680";
+
+				clocks = <&rpmcc RPM_SMD_CXO_A2>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8941_l6>;
+				vddrfa-supply = <&pm8941_l11>;
+				vddpa-supply = <&pm8941_l19>;
+				vdddig-supply = <&pm8941_s3>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+					status = "disabled";
+
+					qcom,mmio = <&pronto>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&msmgpio 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp_i2c6: i2c@f9928000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp_i2c8: i2c@f9964000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp_i2c11: i2c@f9967000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+		};
+
+		blsp_i2c12: i2c@f9968000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@fc318000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xfc318000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				 };
+			};
+		};
+
+		replicator@fc31c000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@fc307000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc307000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merger_out>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31b000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected trought funnel to Audio, Modem and
+				 *     Resource and Power Manager CPU's
+				 * 2...7 - not-connected
+				 */
+				port@1 {
+					reg = <1>;
+					merger_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merger_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		funnel@fc31a000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						remote-endpoint = <&kpss_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		etm@fc33c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33c000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&kpss_in0>;
+					};
+				};
+			};
+		};
+
+		etm@fc33d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33d000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&kpss_in1>;
+					};
+				};
+			};
+		};
+
+		etm@fc33e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33e000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&kpss_in2>;
+					};
+				};
+			};
+		};
+
+		etm@fc33f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0xfc33f000 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&kpss_in3>;
+					};
+				};
+			};
+		};
+
+		ocmem@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl",
+			            "mem";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core",
+			              "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		snoc: interconnect@fc460000 {
+			reg = <0xfc460000 0x4000>;
+			compatible = "qcom,msm8974-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		pnoc: interconnect@fc468000 {
+			reg = <0xfc468000 0x4000>;
+			compatible = "qcom,msm8974-pnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		ocmemnoc: interconnect@fc470000 {
+			reg = <0xfc470000 0x4000>;
+			compatible = "qcom,msm8974-ocmemnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+		};
+
+		mmssnoc: interconnect@fc478000 {
+			reg = <0xfc478000 0x4000>;
+			compatible = "qcom,msm8974-mmssnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&mmcc MMSS_S0_AXI_CLK>,
+			         <&mmcc MMSS_S0_AXI_CLK>;
+		};
+
+		cnoc: interconnect@fc480000 {
+			reg = <0xfc480000 0x4000>;
+			compatible = "qcom,msm8974-cnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		mdss: mdss@fd900000 {
+			status = "disabled";
+
+			compatible = "qcom,mdss";
+			reg = <0xfd900000 0x100>,
+			      <0xfd924000 0x1000>;
+			reg-names = "mdss_phys",
+			            "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+			         <&mmcc MDSS_AXI_CLK>,
+			         <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+			              "bus",
+			              "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@fd900000 {
+				status = "disabled";
+
+				compatible = "qcom,mdp5";
+				reg = <0xfd900100 0x22000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+				              "bus",
+				              "core",
+				              "vsync";
+
+				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+				interconnect-names = "mdp0-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@fd922800 {
+				status = "disabled";
+
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922800 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+				                  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+				                         <&dsi_phy0 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+				         <&mmcc MDSS_AHB_CLK>,
+				         <&mmcc MDSS_AXI_CLK>,
+				         <&mmcc MDSS_BYTE0_CLK>,
+				         <&mmcc MDSS_PCLK0_CLK>,
+				         <&mmcc MDSS_ESC0_CLK>,
+				         <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+				              "iface",
+				              "bus",
+				              "byte",
+				              "pixel",
+				              "core",
+				              "core_mmss";
+
+				phys = <&dsi_phy0>;
+				phy-names = "dsi-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy0: dsi-phy@fd922a00 {
+				status = "disabled";
+
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd922a00 0xd4>,
+				      <0xfd922b00 0x280>,
+				      <0xfd922d80 0x30>;
+				reg-names = "dsi_pll",
+				            "dsi_phy",
+				            "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				qcom,dsi-phy-index = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		imem@fe805000 {
+			status = "disabled";
+			compatible = "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+			};
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				pm8841-regulators {
+					compatible = "qcom,rpm-pm8841-regulators";
+
+					pm8841_s1: s1 {};
+					pm8841_s2: s2 {};
+					pm8841_s3: s3 {};
+					pm8841_s4: s4 {};
+					pm8841_s5: s5 {};
+					pm8841_s6: s6 {};
+					pm8841_s7: s7 {};
+					pm8841_s8: s8 {};
+				};
+
+				pm8941-regulators {
+					compatible = "qcom,rpm-pm8941-regulators";
+
+					pm8941_s1: s1 {};
+					pm8941_s2: s2 {};
+					pm8941_s3: s3 {};
+
+					pm8941_l1: l1 {};
+					pm8941_l2: l2 {};
+					pm8941_l3: l3 {};
+					pm8941_l4: l4 {};
+					pm8941_l5: l5 {};
+					pm8941_l6: l6 {};
+					pm8941_l7: l7 {};
+					pm8941_l8: l8 {};
+					pm8941_l9: l9 {};
+					pm8941_l10: l10 {};
+					pm8941_l11: l11 {};
+					pm8941_l12: l12 {};
+					pm8941_l13: l13 {};
+					pm8941_l14: l14 {};
+					pm8941_l15: l15 {};
+					pm8941_l16: l16 {};
+					pm8941_l17: l17 {};
+					pm8941_l18: l18 {};
+					pm8941_l19: l19 {};
+					pm8941_l20: l20 {};
+					pm8941_l21: l21 {};
+					pm8941_l22: l22 {};
+					pm8941_l23: l23 {};
+					pm8941_l24: l24 {};
+
+					pm8941_lvs1: lvs1 {};
+					pm8941_lvs2: lvs2 {};
+					pm8941_lvs3: lvs3 {};
+				};
+			};
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
new file mode 100644
index 000000000..6740a4cb7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -0,0 +1,18 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+	soc {
+		sdhci@f9824900 {
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+				 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+			clock-names = "core", "iface", "xo", "cal", "sleep";
+		};
+
+		clock-controller@fc400000 {
+				compatible = "qcom,gcc-msm8974pro";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
new file mode 100644
index 000000000..c73e5b149
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8841_0: pm8841@4 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8841_mpps: mpps@a000 {
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
+				     <4 0xa1 0 IRQ_TYPE_NONE>,
+				     <4 0xa2 0 IRQ_TYPE_NONE>,
+				     <4 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	pm8841_1: pm8841@5 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
new file mode 100644
index 000000000..c1f2012d1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8941_0: pm8941@0 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		usb_id: misc@900 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x900>;
+			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_id";
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			usb-otg-in-supply = <&pm8941_5vs1>;
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8941_gpios: gpios@c000 {
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8941_gpios 0 0 36>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
+		};
+
+		pm8941_mpps: mpps@a000 {
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8941_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8941_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			bat_temp {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
+			};
+			die_temp {
+				reg = <VADC_DIE_TEMP>;
+			};
+			ref_625mv {
+				reg = <VADC_REF_625MV>;
+			};
+			ref_1250v {
+				reg = <VADC_REF_1250MV>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+			vbat_sns {
+				reg = <VADC_VBAT_SNS>;
+			};
+		};
+
+		pm8941_iadc: iadc@3600 {
+			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+			qcom,external-resistor-micro-ohms = <10000>;
+		};
+
+		coincell@2800 {
+			compatible = "qcom,pm8941-coincell";
+			reg = <0x2800>;
+			status = "disabled";
+		};
+	};
+
+	pm8941_1: pm8941@1 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8941_wled: wled@d800 {
+			compatible = "qcom,pm8941-wled";
+			reg = <0xd800>;
+			label = "backlight";
+
+			status = "disabled";
+		};
+
+		regulators {
+			compatible = "qcom,pm8941-regulators";
+			interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
+			interrupt-names = "ocp-5vs1", "ocp-5vs2";
+			vin_5vs-supply = <&pm8941_5v>;
+
+			pm8941_5v: s4 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			pm8941_5vs1: 5vs1 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+
+			pm8941_5vs2: 5vs2 {
+				regulator-enable-ramp-delay = <1000>;
+				regulator-pull-down;
+				regulator-over-current-protection;
+				qcom,ocp-max-retries = <10>;
+				qcom,ocp-retry-delay = <30>;
+				qcom,vs-soft-start-strength = <0>;
+				regulator-initial-mode = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
new file mode 100644
index 000000000..ea1ca1661
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pma8084_0: pma8084@0 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>,
+			      <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		pma8084_gpios: gpios@c000 {
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pma8084_gpios 0 0 22>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pma8084_mpps: mpps@a000 {
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+
+		pma8084_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+		};
+
+		pma8084_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+
+			die_temp {
+				reg = <VADC_DIE_TEMP>;
+			};
+			ref_625mv {
+				reg = <VADC_REF_625MV>;
+			};
+			ref_1250v {
+				reg = <VADC_REF_1250MV>;
+			};
+			ref_buf_625mv {
+				reg = <VADC_SPARE1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+	};
+
+	pma8084_1: pma8084@1 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
new file mode 100644
index 000000000..07d611d2b
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+
+	scif2_pins: serial2 {
+		/* P3_0 as TxD2; P3_2 as RxD2 */
+		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+	};
+
+	i2c2_pins: i2c2 {
+		/* RIIC2: P1_4 as SCL, P1_5 as SDA */
+		pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,/* P1_14 = ET_COL  */
+			 <RZA1_PINMUX(5, 9, 2)>, /* P5_9 = ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>, /* P3_3 = ET_MDIO */
+			 <RZA1_PINMUX(3, 4, 2)>, /* P3_4 = ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>, /* P3_5 = ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>, /* P3_6 = ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>, /* P2_0 = ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>, /* P2_1 = ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>, /* P2_2 = ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>, /* P2_3 = ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>, /* P2_4 = ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>, /* P2_5 = ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>, /* P2_6 = ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>, /* P2_7 = ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>, /* P2_8 = ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>, /* P2_9 = ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,/* P2_10 = ET_RXD2 */
+			 <RZA1_PINMUX(2, 11, 2)>;/* P2_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
new file mode 100644
index 000000000..2562cc9b5
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Renesas Electronics
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "GR-Peach";
+	compatible = "renesas,gr-peach", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/mtdblock0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x00a00000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash@18000000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x18000000 0x00800000>;
+		bank-width = <4>;
+		device-width = <1>;
+
+		clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
+		power-domains = <&cpg_clocks>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rootfs@600000 {
+			label = "rootfs";
+			reg = <0x00600000 0x00200000>;
+		};
+	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port6 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	scif2_pins: serial2 {
+		/* P6_2 as RxD2; P6_3 as TxD2 */
+		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
+	};
+
+	ether_pins: ether {
+		/* Ethernet on Ports 1,3,5,10 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>, /* P1_14 = ET_COL   */
+			 <RZA1_PINMUX(3, 0, 2)>,  /* P3_0 = ET_TXCLK  */
+			 <RZA1_PINMUX(3, 3, 2)>,  /* P3_3 = ET_MDIO   */
+			 <RZA1_PINMUX(3, 4, 2)>,  /* P3_4 = ET_RXCLK  */
+			 <RZA1_PINMUX(3, 5, 2)>,  /* P3_5 = ET_RXER   */
+			 <RZA1_PINMUX(3, 6, 2)>,  /* P3_6 = ET_RXDV   */
+			 <RZA1_PINMUX(5, 9, 2)>,  /* P5_9 = ET_MDC    */
+			 <RZA1_PINMUX(10, 1, 4)>, /* P10_1 = ET_TXER  */
+			 <RZA1_PINMUX(10, 2, 4)>, /* P10_2 = ET_TXEN  */
+			 <RZA1_PINMUX(10, 3, 4)>, /* P10_3 = ET_CRS   */
+			 <RZA1_PINMUX(10, 4, 4)>, /* P10_4 = ET_TXD0  */
+			 <RZA1_PINMUX(10, 5, 4)>, /* P10_5 = ET_TXD1  */
+			 <RZA1_PINMUX(10, 6, 4)>, /* P10_6 = ET_TXD2  */
+			 <RZA1_PINMUX(10, 7, 4)>, /* P10_7 = ET_TXD3  */
+			 <RZA1_PINMUX(10, 8, 4)>, /* P10_8 = ET_RXD0  */
+			 <RZA1_PINMUX(10, 9, 4)>, /* P10_9 = ET_RXD1  */
+			 <RZA1_PINMUX(10, 10, 4)>,/* P10_10 = ET_RXD2 */
+			 <RZA1_PINMUX(10, 11, 4)>;/* P10_11 = ET_RXD3 */
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13333000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+
+	status = "okay";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+
+		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
new file mode 100644
index 000000000..99acfe4fe
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/A1H RSK board
+ *
+ * Copyright (C) 2016 Renesas Electronics
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	model = "RSKRZA1";
+	compatible = "renesas,rskrza1", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x02000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		key-1 {
+			interrupt-parent = <&irqc>;
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_1>;
+			label = "SW1";
+			wakeup-source;
+		};
+
+		key-2 {
+			interrupt-parent = <&irqc>;
+			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_2>;
+			label = "SW2";
+			wakeup-source;
+		};
+
+		key-3 {
+			interrupt-parent = <&irqc>;
+			interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_3>;
+			label = "SW3";
+			wakeup-source;
+		};
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&port7 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	io_expander1: gpio@20 {
+		compatible = "onnn,cat9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander2: gpio@21 {
+		compatible = "onnn,cat9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24016", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+&pinctrl {
+	/* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
+	i2c3_pins: i2c3 {
+		pinmux = <RZA1_PINMUX(1, 6, 1)>,	/* RIIC3SCL */
+			 <RZA1_PINMUX(1, 7, 1)>;	/* RIIC3SDA */
+	};
+
+	keyboard_pins: keyboard {
+		pinmux = <RZA1_PINMUX(1, 9, 3)>,	/* IRQ3 */
+			 <RZA1_PINMUX(1, 8, 3)>,	/* IRQ2 */
+			 <RZA1_PINMUX(1, 11, 3)>;	/* IRQ5 */
+	};
+
+	/* Serial Console */
+	scif2_pins: serial2 {
+		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
+			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
+	};
+
+	/* Ethernet */
+	ether_pins: ether {
+		/* Ethernet on Ports 1,2,3,5 */
+		pinmux = <RZA1_PINMUX(1, 14, 4)>,	/* ET_COL   */
+			 <RZA1_PINMUX(5, 9, 2)>,	/* ET_MDC   */
+			 <RZA1_PINMUX(3, 3, 2)>,	/* ET_MDIO  */
+			 <RZA1_PINMUX(3, 4, 2)>,	/* ET_RXCLK */
+			 <RZA1_PINMUX(3, 5, 2)>,	/* ET_RXER  */
+			 <RZA1_PINMUX(3, 6, 2)>,	/* ET_RXDV  */
+			 <RZA1_PINMUX(2, 0, 2)>,	/* ET_TXCLK */
+			 <RZA1_PINMUX(2, 1, 2)>,	/* ET_TXER  */
+			 <RZA1_PINMUX(2, 2, 2)>,	/* ET_TXEN  */
+			 <RZA1_PINMUX(2, 3, 2)>,	/* ET_CRS   */
+			 <RZA1_PINMUX(2, 4, 2)>,	/* ET_TXD0  */
+			 <RZA1_PINMUX(2, 5, 2)>,	/* ET_TXD1  */
+			 <RZA1_PINMUX(2, 6, 2)>,	/* ET_TXD2  */
+			 <RZA1_PINMUX(2, 7, 2)>,	/* ET_TXD3  */
+			 <RZA1_PINMUX(2, 8, 2)>,	/* ET_RXD0  */
+			 <RZA1_PINMUX(2, 9, 2)>,	/* ET_RXD1  */
+			 <RZA1_PINMUX(2, 10, 2)>,	/* ET_RXD2  */
+			 <RZA1_PINMUX(2, 11, 2)>;	/* ET_RXD3  */
+	};
+
+	/* SDHI ch1 on CN1 */
+	sdhi1_pins: sdhi1 {
+		pinmux = <RZA1_PINMUX(3, 8, 7)>,	/* SD_CD_1 */
+			 <RZA1_PINMUX(3, 9, 7)>,	/* SD_WP_1 */
+			 <RZA1_PINMUX(3, 10, 7)>,	/* SD_D1_1 */
+			 <RZA1_PINMUX(3, 11, 7)>,	/* SD_D0_1 */
+			 <RZA1_PINMUX(3, 12, 7)>,	/* SD_CLK_1 */
+			 <RZA1_PINMUX(3, 13, 7)>,	/* SD_CMD_1 */
+			 <RZA1_PINMUX(3, 14, 7)>,	/* SD_D3_1 */
+			 <RZA1_PINMUX(3, 15, 7)>;	/* SD_D2_1 */
+	};
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ether_pins>;
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif2_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
new file mode 100644
index 000000000..45cf75b58
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ */
+
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r7s72100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	/* Fixed factor clocks */
+	b_clk: b {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+			clocks = <&cpg_clocks R7S72100_CLK_I>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	p0_clk: p0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	p1_clk: p1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rtc_x1_clk: rtc_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 32678 */
+		clock-frequency = <0>;
+	};
+
+	rtc_x3_clk: rtc_x3 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board to 4000000 */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: cache-controller@3ffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x3ffff000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			arm,early-bresp-disable;
+			arm,full-line-zero-disable;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scif0: serial@e8007000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007000 64>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif1: serial@e8007800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8007800 64>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif2: serial@e8008000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008000 64>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif3: serial@e8008800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8008800 64>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif4: serial@e8009000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009000 64>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif5: serial@e8009800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe8009800 64>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif6: serial@e800a000 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a000 64>;
+			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		scif7: serial@e800a800 {
+			compatible = "renesas,scif-r7s72100", "renesas,scif";
+			reg = <0xe800a800 64>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		spi0: spi@e800c800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800c800 0x24>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e800d000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d000 0x24>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@e800d800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800d800 0x24>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@e800e000 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e000 0x24>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@e800e800 {
+			compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+			reg = <0xe800e800 0x24>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+			power-domains = <&cpg_clocks>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbhs0: usb@e8010000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8010000 0x1a0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB0>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		usbhs1: usb@e8207000 {
+			compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+			reg = <0xe8207000 0x1a0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_USB1>;
+			renesas,buswait = <4>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		mmcif: mmc@e804c800 {
+			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+			reg = <0xe804c800 0x80>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+			power-domains = <&cpg_clocks>;
+			reg-io-width = <4>;
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@e804e000 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e000 0x100>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
+				 <&mstp12_clks R7S72100_CLK_SDHI01>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@e804e800 {
+			compatible = "renesas,sdhi-r7s72100";
+			reg = <0xe804e800 0x100>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
+				 <&mstp12_clks R7S72100_CLK_SDHI11>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg_clocks>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8201000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8201000 0x1000>,
+				<0xe8202000 0x1000>;
+		};
+
+		ether: ethernet@e8203000 {
+			compatible = "renesas,ether-r7s72100";
+			reg = <0xe8203000 0x800>,
+			      <0xe8204800 0x200>;
+			interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+			power-domains = <&cpg_clocks>;
+			phy-mode = "mii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ceu: camera@e8210000 {
+			reg = <0xe8210000 0x3000>;
+			compatible = "renesas,r7s72100-ceu";
+			interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		wdt: watchdog@fcfe0000 {
+			compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt";
+			reg = <0xfcfe0000 0x6>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&p0_clk>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+			#power-domain-cells = <0>;
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks@fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks@fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+
+		mstp5_clks: mstp5_clks@fcfe0428 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0428 4>;
+			clocks = <&p0_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_OSTM0 R7S72100_CLK_OSTM1>;
+			clock-output-names = "ostm0", "ostm1";
+		};
+
+		mstp6_clks: mstp6_clks@fcfe042c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe042c 4>;
+			clocks = <&b_clk>, <&p0_clk>;
+			clock-indices = <R7S72100_CLK_CEU R7S72100_CLK_RTC>;
+			clock-output-names = "ceu", "rtc";
+		};
+
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&b_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <R7S72100_CLK_ETHER R7S72100_CLK_USB0 R7S72100_CLK_USB1>;
+			clock-output-names = "ether", "usb0", "usb1";
+		};
+
+		mstp8_clks: mstp8_clks@fcfe0434 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0434 4>;
+			clocks = <&p1_clk>;
+			clock-indices = <R7S72100_CLK_MMCIF>;
+			clock-output-names = "mmcif";
+		};
+
+		mstp9_clks: mstp9_clks@fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+				R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1";
+		};
+
+		mstp10_clks: mstp10_clks@fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
+		mstp12_clks: mstp12_clks@fcfe0444 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0444 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SDHI00 R7S72100_CLK_SDHI01
+				R7S72100_CLK_SDHI10 R7S72100_CLK_SDHI11
+			>;
+			clock-output-names = "sdhi00", "sdhi01", "sdhi10", "sdhi11";
+		};
+
+		pinctrl: pinctrl@fcfe3000 {
+			compatible = "renesas,r7s72100-ports";
+
+			reg = <0xfcfe3000 0x4230>;
+
+			port0: gpio-0 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 0 6>;
+			};
+
+			port1: gpio-1 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			port2: gpio-2 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			port3: gpio-3 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			port4: gpio-4 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			port5: gpio-5 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 80 11>;
+			};
+
+			port6: gpio-6 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			port7: gpio-7 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			port8: gpio-8 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			port9: gpio-9 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 144 8>;
+			};
+
+			port10: gpio-10 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 160 16>;
+			};
+
+			port11: gpio-11 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl 0 176 16>;
+			};
+		};
+
+		ostm0: timer@fcfec000 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec000 0x30>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		ostm1: timer@fcfec400 {
+			compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+			reg = <0xfcfec400 0x30>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mstp5_clks R7S72100_CLK_OSTM1>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@fcfee000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee000 0x44>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@fcfee400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee400 0x44>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@fcfee800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfee800 0x44>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fcfeec00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+			reg = <0xfcfeec00 0x44>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+			clock-frequency = <100000>;
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		irqc: interrupt-controller@fcfef800 {
+			compatible = "renesas,r7s72100-irqc",
+				     "renesas,rza1-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xfcfef800 0x6>;
+			interrupt-map =
+				<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <7 0>;
+		};
+
+		mtu2: timer@fcff0000 {
+			compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+			reg = <0xfcff0000 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tgi0a";
+			clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+			clock-names = "fck";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+
+		rtc: rtc@fcff1000 {
+			compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+			reg = <0xfcff1000 0x2e>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "alarm", "period", "carry";
+			clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+				 <&rtc_x3_clk>, <&extal_clk>;
+			clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+			power-domains = <&cpg_clocks>;
+			status = "disabled";
+		};
+	};
+
+	usb_x1_clk: usb_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value must be set by board */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
new file mode 100644
index 000000000..d062d0286
--- /dev/null
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZA2MEVB board
+ *
+ * Copyright (C) 2018 Renesas Electronics
+ *
+ */
+
+/dts-v1/;
+#include "r7s9210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+
+/ {
+	model = "RZA2MEVB";
+	compatible = "renesas,rza2mevb", "renesas,r7s9210";
+
+	aliases {
+		serial0 = &scif4;
+		ethernet0 = &ether0;
+		ethernet1 = &ether1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		key-3 {
+			interrupt-parent = <&irqc>;
+			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_3>;
+			label = "SW3";
+			wakeup-source;
+		};
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
+		};
+		green {
+			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x00800000>;	 /* HyperRAM */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ether0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0_pins>;
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ether1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth1_pins>;
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+/* EXTAL */
+&extal_clk {
+	clock-frequency = <24000000>;	/* 24MHz */
+};
+
+/* High resolution System tick timers */
+&ostm0 {
+	status = "okay";
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */
+			 <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */
+			 <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */
+			 <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */
+			 <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */
+			 <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */
+			 <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */
+			 <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */
+			 <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */
+			 <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */
+			 <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */
+			 <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */
+			 <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */
+			 <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */
+			 <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */
+			 <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */
+			 <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */
+			 <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */
+			 <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */
+			 <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */
+			 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
+	};
+
+	keyboard_pins: keyboard {
+		pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>;	/* IRQ0 */
+	};
+
+	/* Serial Console */
+	scif4_pins: serial4 {
+		pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,	/* TxD4 */
+			 <RZA2_PINMUX(PORT9, 1, 4)>;	/* RxD4 */
+	};
+
+	sdhi0_pins: sdhi0 {
+		pinmux = <RZA2_PINMUX(PORT5, 0, 3)>,	/* SD0_CD */
+			 <RZA2_PINMUX(PORT5, 1, 3)>;	/* SD0_WP */
+	};
+
+	sdhi1_pins: sdhi1 {
+		pinmux = <RZA2_PINMUX(PORT5, 4, 3)>,	/* SD1_CD */
+			 <RZA2_PINMUX(PORT5, 5, 3)>;	/* SD1_WP */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZA2_PINMUX(PORT5, 2, 3)>,	/* VBUSIN0 */
+			 <RZA2_PINMUX(PORTC, 6, 1)>,	/* VBUSEN0 */
+			 <RZA2_PINMUX(PORTC, 7, 1)>;	/* OVRCUR0 */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZA2_PINMUX(PORTC, 0, 1)>,	/* VBUSIN1 */
+			 <RZA2_PINMUX(PORTC, 5, 1)>,	/* VBUSEN1 */
+			 <RZA2_PINMUX(PORT7, 5, 5)>;	/* OVRCUR1 */
+	};
+};
+
+/* RTC_X1 */
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
+/* Serial Console */
+&scif4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif4_pins>;
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* USB-0 as Host */
+&usb2_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";	/* Requires JP3 to be fitted */
+	status = "okay";
+};
+
+/* USB-1 as Host */
+&usb2_phy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB_X1 */
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
new file mode 100644
index 000000000..85c0399b1
--- /dev/null
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R7S9210 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
+
+/ {
+	compatible = "renesas,r7s9210";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* External clocks */
+	extal_clk: extal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* Value must be set by board */
+		clock-frequency = <0>;
+	};
+
+	rtc_x1_clk: rtc_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value (32678) must be set by board */
+		clock-frequency = <0>;
+	};
+
+	usb_x1_clk: usb_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* If clk present, value (48000000) must be set by board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <528000000>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: cache-controller@1f003000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1f003000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			arm,early-bresp-disable;
+			arm,full-line-zero-disable;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scif0: serial@e8007000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8007000 0x18>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 47>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif1: serial@e8007800 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8007800 0x18>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 46>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif2: serial@e8008000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8008000 0x18>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 45>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif3: serial@e8008800 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8008800 0x18>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 44>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif4: serial@e8009000 {
+			compatible = "renesas,scif-r7s9210";
+			reg = <0xe8009000 0x18>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD 43>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		spi0: spi@e800c800 {
+			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+			reg = <0xe800c800 0x24>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD 97>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e800d000 {
+			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+			reg = <0xe800d000 0x24>;
+			interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD 96>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@e800d800 {
+			compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+			reg = <0xe800d800 0x24>;
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD 95>;
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ether0: ethernet@e8204000 {
+			compatible = "renesas,ether-r7s9210";
+			reg = <0xe8204000 0x200>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 65>;
+			power-domains = <&cpg>;
+
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ether1: ethernet@e8204200 {
+			compatible = "renesas,ether-r7s9210";
+			reg = <0xe8204200 0x200>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 64>;
+			power-domains = <&cpg>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e803a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+			reg = <0xe803a000 0x44>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 87>;
+			power-domains = <&cpg>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e803a400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+			reg = <0xe803a400 0x44>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 86>;
+			power-domains = <&cpg>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e803a800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+			reg = <0xe803a800 0x44>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 85>;
+			power-domains = <&cpg>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e803ac00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+			reg = <0xe803ac00 0x44>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 84>;
+			power-domains = <&cpg>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		ostm0: timer@e803b000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803b000 0x30>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 36>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@e803c000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803c000 0x30>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 35>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@e803d000 {
+			compatible = "renesas,r7s9210-ostm", "renesas,ostm";
+			reg = <0xe803d000 0x30>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD 34>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci0: usb@e8218000 {
+			compatible = "generic-ohci";
+			reg = <0xe8218000 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 61>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@e8218100 {
+			compatible = "generic-ehci";
+			reg = <0xe8218100 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 61>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@e8218200 {
+			compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
+			reg = <0xe8218200 0x700>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>;
+			clock-names = "fck", "usb_x1";
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usbhs0: usb@e8219000 {
+			compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
+			reg = <0xe8219000 0x724>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 61>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@e821a000 {
+			compatible = "generic-ohci";
+			reg = <0xe821a000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 60>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@e821a100 {
+			compatible = "generic-ehci";
+			reg = <0xe821a100 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 60>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@e821a200 {
+			compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
+			reg = <0xe821a200 0x700>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>;
+			clock-names = "fck", "usb_x1";
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usbhs1: usb@e821b000 {
+			compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
+			reg = <0xe821b000 0x724>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 60>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@e8228000 {
+			compatible = "renesas,sdhi-r7s9210";
+			reg = <0xe8228000 0x8c0>;
+			interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@e822a000 {
+			compatible = "renesas,sdhi-r7s9210";
+			reg = <0xe822a000 0x8c0>;
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>;
+			clock-names = "core", "cd";
+			power-domains = <&cpg>;
+			cap-sd-highspeed;
+			cap-sdio-irq;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8221000 0x1000>,
+			      <0xe8222000 0x1000>;
+		};
+
+		cpg: clock-controller@fcfe0010 {
+			compatible = "renesas,r7s9210-cpg-mssr";
+			reg = <0xfcfe0010 0x455>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		wdt: watchdog@fcfe7000 {
+			compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt";
+			reg = <0xfcfe7000 0x26>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R7S9210_CLK_P0>;
+		};
+
+		bsid: chipid@fcfe8004 {
+			compatible = "renesas,bsid";
+			reg = <0xfcfe8004 4>;
+		};
+
+		irqc: interrupt-controller@fcfef800 {
+			compatible = "renesas,r7s9210-irqc",
+				     "renesas,rza1-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xfcfef800 0x6>;
+			interrupt-map =
+				<0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				<1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				<2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				<3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				<4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				<5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				<6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <7 0>;
+		};
+
+		pinctrl: pinctrl@fcffe000 {
+			compatible = "renesas,r7s9210-pinctrl";
+			reg = <0xfcffe000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 176>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
new file mode 100644
index 000000000..b088e8e35
--- /dev/null
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ */
+
+/dts-v1/;
+#include "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm", "renesas,r8a73a4";
+
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
+	ape6evm_fixed_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ape6evm_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 28 GPIO_ACTIVE_HIGH>;
+			label = "GNSS_EN";
+		};
+		led2 {
+			gpios = <&pfc 126 GPIO_ACTIVE_HIGH>;
+			label = "NFC_NRST";
+		};
+		led3 {
+			gpios = <&pfc 132 GPIO_ACTIVE_HIGH>;
+			label = "GNSS_NRST";
+		};
+		led4 {
+			gpios = <&pfc 232 GPIO_ACTIVE_HIGH>;
+			label = "BT_WAKEUP";
+		};
+		led5 {
+			gpios = <&pfc 250 GPIO_ACTIVE_HIGH>;
+			label = "STROBE";
+		};
+		led6 {
+			gpios = <&pfc 288 GPIO_ACTIVE_HIGH>;
+			label = "BBRESETOUT";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		zero-key {
+			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			label = "S16";
+			wakeup-source;
+		};
+
+		menu-key {
+			gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "S17";
+		};
+
+		home-key {
+			gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "S18";
+		};
+
+		back-key {
+			gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "S19";
+		};
+
+		volup-key {
+			gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "S20";
+		};
+
+		voldown-key {
+			gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "S21";
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: regulator@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <1950000 1115000>,	/* kHz  uV */
+			   <1462500  995000>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&bsc {
+	flash@0 {
+		compatible = "cfi-flash", "mtd-rom";
+		reg = <0x0 0x08000000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "uboot-env";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "flash";
+				reg = <0x00080000 0x07f80000>;
+			};
+		};
+	};
+
+	ethernet@8000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x08000000 0x1000>;
+		interrupt-parent = <&irqc1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&ape6evm_fixed_3v3>;
+		vddvario-supply = <&ape6evm_fixed_1v8>;
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&pfc {
+	scifa0_pins: scifa0 {
+		groups = "scifa0_data";
+		function = "scifa0";
+	};
+
+	mmc0_pins: mmc0 {
+		groups = "mmc0_data8", "mmc0_ctrl";
+		function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
+
+	keyboard_pins: keyboard {
+		pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328",
+		       "PORT329";
+		bias-pull-up;
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
new file mode 100644
index 000000000..e5fb1ce26
--- /dev/null
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -0,0 +1,905 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a73a4 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ */
+
+#include <dt-bindings/clock/r8a73a4-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a73a4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+			clock-frequency = <1500000000>;
+			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+			power-domains = <&pd_a3sm>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller-1 {
+			compatible = "cache";
+			clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+			power-domains = <&pd_a3km>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	ptm {
+		compatible = "arm,coresight-etm3x";
+		power-domains = <&pd_d4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	dbsc1: memory-controller@e6790000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe6790000 0 0x10000>;
+		power-domains = <&pd_a3bc>;
+	};
+
+	dbsc2: memory-controller@e67a0000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe67a0000 0 0x10000>;
+		power-domains = <&pd_a3bc>;
+	};
+
+	dmac: dma-multiplexer {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <20>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
+			clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
+			power-domains = <&pd_a3sp>;
+		};
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
+		power-domains = <&pd_a3sp>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
+		power-domains = <&pd_c4>;
+	};
+
+	irqc1: interrupt-controller@e61c0200 {
+		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0200 0 0x200>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
+		power-domains = <&pd_c4>;
+	};
+
+	pfc: pinctrl@e6050000 {
+		compatible = "renesas,pfc-r8a73a4";
+		reg = <0 0xe6050000 0 0x9000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 31>, <&pfc 32 32 9>,
+			<&pfc 64 64 22>, <&pfc 96 96 31>,
+			<&pfc 128 128 7>, <&pfc 160 160 19>,
+			<&pfc 192 192 31>, <&pfc 224 224 27>,
+			<&pfc 256 256 28>, <&pfc 288 288 21>,
+			<&pfc 320 320 10>;
+		interrupts-extended =
+			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
+			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
+			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
+			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
+			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+			<&irqc1 24 0>, <&irqc1 25 0>;
+		power-domains = <&pd_c5>;
+	};
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
+			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+		power-domains = <&pd_c5>;
+	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6c20000 0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6c30000 0 0x100>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+		reg = <0 0xe6c40000 0 0x100>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+		reg = <0 0xe6c50000 0 0x100>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 0x100>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb3: serial@e6cf0000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6cf0000 0 0x100>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
+		clock-names = "fck";
+		power-domains = <&pd_c4>;
+		status = "disabled";
+	};
+
+	sdhi0: mmc@ee100000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee100000 0 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: mmc@ee120000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee120000 0 0x100>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: mmc@ee140000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
+		power-domains = <&pd_a3sp>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmc@ee220000 {
+		compatible = "renesas,mmcif-r8a73a4", "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
+		power-domains = <&pd_a3sp>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x2000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		clocks = <&mstp4_clks R8A73A4_CLK_INTC_SYS>;
+		clock-names = "clk";
+		power-domains = <&pd_c4>;
+	};
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-r8a73a4", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x20000000>;
+		reg = <0 0xfec10000 0 0x400>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_c4>;
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clocks */
+		extalr_clk: extalr {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		extal1_clk: extal1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+		extal2_clk: extal2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+		fsiack_clk: fsiack {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+		fsibck_clk: fsibck {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a73a4-cpg-clocks";
+			reg = <0 0xe6150000 0 0x10000>;
+			clocks = <&extal1_clk>, <&extal2_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll2",
+					     "pll2s", "pll2h", "z", "z2",
+					     "i", "m3", "b", "m1", "m2",
+					     "zx", "zs", "hp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		zb_clk: zb_clk@e6150010 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150010 0 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "zb";
+		};
+		sdhi0_clk: sdhi0ck@e6150074 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150074 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		sdhi1_clk: sdhi1ck@e6150078 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		sdhi2_clk: sdhi2ck@e615007c {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615007c 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		mmc0_clk: mmc0@e6150240 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		mmc1_clk: mmc1@e6150244 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150244 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		vclk1_clk: vclk1@e6150008 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150008 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		vclk2_clk: vclk2@e615000c {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615000c 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		vclk3_clk: vclk3@e615001c {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615001c 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		vclk4_clk: vclk4@e6150014 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150014 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		vclk5_clk: vclk5@e6150034 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150034 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <0>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		fsia_clk: fsia@e6150018 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150018 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <&fsiack_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		fsib_clk: fsib@e6150090 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150090 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <&fsibck_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		mp_clk: mp@e6150080 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150080 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <&extal2_clk>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		m4_clk: m4@e6150098 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150098 0 4>;
+			clocks = <&cpg_clocks R8A73A4_CLK_PLL2S>;
+			#clock-cells = <0>;
+		};
+		hsi_clk: hsi@e615026c {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&cpg_clocks R8A73A4_CLK_PLL2H>, <&pll1_div2_clk>,
+				 <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>;
+			#clock-cells = <0>;
+		};
+		spuv_clk: spuv@e6150094 {
+			compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150094 0 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+				 <&extal2_clk>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		main_div2_clk: main_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A73A4_CLK_MAIN>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		pll0_div2_clk: pll0_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		pll1_div2_clk: pll1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A73A4_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		extal1_div2_clk: extal1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal1_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+				R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+				R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+				R8A73A4_CLK_DMAC
+			>;
+			clock-output-names =
+				"scifa0", "scifa1", "scifb0", "scifb1",
+				"scifb2", "scifb3", "dmac";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cpg_clocks R8A73A4_CLK_HP>, <&mmc1_clk>,
+				 <&sdhi2_clk>, <&sdhi1_clk>, <&sdhi0_clk>,
+				 <&mmc0_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+				 <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks
+				 R8A73A4_CLK_HP>, <&cpg_clocks
+				 R8A73A4_CLK_HP>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_IIC2 R8A73A4_CLK_MMCIF1
+				R8A73A4_CLK_SDHI2 R8A73A4_CLK_SDHI1
+				R8A73A4_CLK_SDHI0 R8A73A4_CLK_MMCIF0
+				R8A73A4_CLK_IIC6 R8A73A4_CLK_IIC7
+				R8A73A4_CLK_IIC0 R8A73A4_CLK_IIC1
+				R8A73A4_CLK_CMT1
+			>;
+			clock-output-names =
+				"iic2", "mmcif1", "sdhi2", "sdhi1", "sdhi0",
+				"mmcif0", "iic6", "iic7", "iic0", "iic1",
+				"cmt1";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+				 <&main_div2_clk>,
+				 <&cpg_clocks R8A73A4_CLK_HP>,
+				 <&cpg_clocks R8A73A4_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_IRQC R8A73A4_CLK_INTC_SYS
+				R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
+				R8A73A4_CLK_IIC3
+			>;
+			clock-output-names =
+				"irqc", "intc-sys", "iic5", "iic4", "iic3";
+		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
+			>;
+			clock-output-names =
+				"thermal", "iic8";
+		};
+	};
+
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0 0xff000044 0 4>;
+	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
+		reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_c4: c4@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sg: a3sg@16 {
+						reg = <16>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3ex: a3ex@17 {
+						reg = <17>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sp: a3sp@18 {
+						reg = <18>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <0>;
+
+						pd_a2us: a2us@19 {
+							reg = <19>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					pd_a3sm: a3sm@20 {
+						reg = <20>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <0>;
+
+						pd_a2sl: a2sl@21 {
+							reg = <21>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					pd_a3km: a3km@22 {
+						reg = <22>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <0>;
+
+						pd_a2kl: a2kl@23 {
+							reg = <23>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				pd_c4ma: c4ma@1 {
+					reg = <1>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_c4cl: c4cl@2 {
+					reg = <2>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_d4: d4@3 {
+					reg = <3>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4bc: a4bc@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3bc: a3bc@5 {
+						reg = <5>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4l: a4l@6 {
+					reg = <6>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4lc: a4lc@7 {
+					reg = <7>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4mp: a4mp@8 {
+					reg = <8>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3mp: a3mp@9 {
+						reg = <9>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3vc: a3vc@10 {
+						reg = <10>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4sf: a4sf@11 {
+					reg = <11>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a3r: a3r@12 {
+					reg = <12>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a2rv: a2rv@13 {
+						reg = <13>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a2is: a2is@14 {
+						reg = <14>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
new file mode 100644
index 000000000..d960c2767
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+/dts-v1/;
+#include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "armadillo 800 eva";
+	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+	aliases {
+		serial0 = &scifa1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0>, <1800000 1>;
+
+		enable-active-high;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "SW3";
+			wakeup-source;
+		};
+
+		back-key {
+			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW4";
+		};
+
+		menu-key {
+			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "SW5";
+		};
+
+		home-key {
+			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW6";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led3 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+			label = "LED4";
+		};
+		led5 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+			label = "LED5";
+		};
+		led6 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+	};
+
+	i2c2: i2c-2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		sda-gpios = <&pfc 208 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pfc 91 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		power-supply = <&reg_5p0v>;
+		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+			bitclock-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&extal1_clk {
+	clock-frequency = <24000000>;
+};
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+&fsibck_clk {
+	clock-frequency = <12288000>;
+};
+&cpg_clocks {
+	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&lcd0_pins>;
+	pinctrl-names = "default";
+
+	ether_pins: ether {
+		groups = "gether_mii", "gether_int";
+		function = "gether";
+	};
+
+	scifa1_pins: scifa1 {
+		groups = "scifa1_data";
+		function = "scifa1";
+	};
+
+	st1232_pins: touchscreen {
+		groups = "intc_irq10";
+		function = "intc";
+	};
+
+	backlight_pins: backlight {
+		groups = "tpu0_to2_1";
+		function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		function = "sdhi0";
+	};
+
+	fsia_pins: sounda {
+		groups = "fsia_sclk_in", "fsia_mclk_out",
+			 "fsia_data_in_1", "fsia_data_out_0";
+		function = "fsia";
+	};
+
+	lcd0_pins: lcd0 {
+		groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+		function = "lcd0";
+	};
+
+	lcd0_mux {
+		/* DBGMD/LCDC0/FSIA MUX */
+		gpio-hog;
+		gpios = <176 0>;
+		output-high;
+	};
+};
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tmu0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
new file mode 100644
index 000000000..1b2cf5fa3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Mobile A1 (R8A77400) SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7740";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <800000000>;
+			power-domains = <&pd_a3sm>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@c2800000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xc2800000 0x1000>,
+		      <0xc2000000 0x1000>;
+	};
+
+	L2: cache-controller@f0100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	dbsc3: memory-controller@fe400000 {
+		compatible = "renesas,dbsc3-r8a7740";
+		reg = <0xfe400000 0x400>;
+		power-domains = <&pd_a4s>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ptm {
+		compatible = "arm,coresight-etm3x";
+		power-domains = <&pd_d4>;
+	};
+
+	ceu0: ceu@fe910000 {
+		reg = <0xfe910000 0x3000>;
+		compatible = "renesas,r8a7740-ceu";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_CEU20>;
+		power-domains = <&pd_a4r>;
+		status = "disabled";
+	};
+
+	ceu1: ceu@fe914000 {
+		reg = <0xfe914000 0x3000>;
+		compatible = "renesas,r8a7740-ceu";
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_CEU21>;
+		power-domains = <&pd_a4r>;
+		status = "disabled";
+	};
+
+	cmt1: timer@e6138000 {
+		compatible = "renesas,r8a7740-cmt1";
+		reg = <0xe6138000 0x170>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	/* irqpin0: IRQ0 - IRQ7 */
+	irqpin0: interrupt-controller@e6900000 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin1: IRQ8 - IRQ15 */
+	irqpin1: interrupt-controller@e6900004 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin2: IRQ16 - IRQ23 */
+	irqpin2: interrupt-controller@e6900008 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin3: IRQ24 - IRQ31 */
+	irqpin3: interrupt-controller@e690000c {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	ether: ethernet@e9a00000 {
+		compatible = "renesas,gether-r8a7740";
+		reg = <0xe9a00000 0x800>,
+		      <0xe9a01800 0x800>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
+		power-domains = <&pd_a4s>;
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@fff20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
+		reg = <0xfff20000 0x425>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
+		power-domains = <&pd_a4r>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6c20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
+		reg = <0xe6c20000 0x425>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c40000 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c50000 0x100>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c60000 0x100>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c70000 0x100>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c80000 0x100>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa5: serial@e6cb0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cb0000 0x100>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa6: serial@e6cc0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cc0000 0x100>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa7: serial@e6cd0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cd0000 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+		reg = <0xe6c30000 0x100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	pfc: pinctrl@e6050000 {
+		compatible = "renesas,pfc-r8a7740";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605800c 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pfc 0 0 212>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+		power-domains = <&pd_c5>;
+	};
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x148>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+		#pwm-cells = <3>;
+	};
+
+	mmcif0: mmc@e6bd0000 {
+		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	sdhi0: mmc@e6850000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6850000 0x100>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: mmc@e6860000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6860000 0x100>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi2: mmc@e6870000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6870000 0x100>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sh_fsi2: sound@fe1f0000 {
+		#sound-dai-cells = <1>;
+		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
+		reg = <0xfe1f0000 0x400>;
+		interrupts = <GIC_SPI 9 0x4>;
+		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+		power-domains = <&pd_a4mp>;
+		status = "disabled";
+	};
+
+	tmu0: timer@fff80000 {
+		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+		reg = <0xfff80000 0x2c>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&pd_a4r>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@fff90000 {
+		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+		reg = <0xfff90000 0x2c>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
+		clock-names = "fck";
+		power-domains = <&pd_a4r>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clock */
+		extalr_clk: extalr {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		extal1_clk: extal1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		extal2_clk: extal2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		dv_clk: dv {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+		fmsick_clk: fmsick {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		fmsock_clk: fmsock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		fsiack_clk: fsiack {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		fsibck_clk: fsibck {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7740-cpg-clocks";
+			reg = <0xe6150000 0x10000>;
+			clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "system", "pllc0", "pllc1",
+					     "pllc2", "r",
+					     "usb24s",
+					     "i", "zg", "b", "m1", "hp",
+					     "hpp", "usbp", "s", "zb", "m3",
+					     "cp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		vclk1_clk: vclk1@e6150008 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150008 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		vclk2_clk: vclk2@e615000c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615000c 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		fmsi_clk: fmsi@e6150010 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150010 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		fmso_clk: fmso@e6150014 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150014 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		fsia_clk: fsia@e6150018 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150018 4>;
+			clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		sub_clk: sub@e6150080 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150080 4>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		spu_clk: spu@e6150084 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150084 4>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+		vou_clk: vou@e6150088 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150088 4>;
+			clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		stpro_clk: stpro@e615009c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615009c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC0>;
+			#clock-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		pllc1_div2_clk: pllc1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		extal1_div2_clk: extal1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal1_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		subck_clks: subck_clks@e6150080 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150080 4>;
+			clocks = <&sub_clk>, <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
+			>;
+			clock-output-names =
+				"subck", "subck2";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150134 4>, <0xe6150038 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_S>,
+				 <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>,
+				 <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
+				R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
+				R8A7740_CLK_LCDC0
+			>;
+			clock-output-names =
+				"ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
+				"tmu1", "lcdc0";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150138 4>, <0xe6150040 4>;
+			clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
+				R8A7740_CLK_SCIFA7
+				R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
+				R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
+				R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
+				R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
+				R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
+				R8A7740_CLK_SCIFA4
+			>;
+			clock-output-names =
+				"scifa6", "intca",
+				"scifa7", "dmac1", "dmac2", "dmac3",
+				"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
+				"scifa2", "scifa3", "scifa4";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe615013c 4>, <0xe6150048 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_R>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
+				R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
+				R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
+			>;
+			clock-output-names =
+				"cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
+				"mmc", "gether", "tpu0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150140 4>, <0xe615004c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_USBH R8A7740_CLK_SDHI2
+				R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
+			>;
+			clock-output-names =
+				"usbhost", "sdhi2", "usbfunc", "usphy";
+		};
+	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4lc: a4lc@1 {
+					reg = <1>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4mp: a4mp@2 {
+					reg = <2>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_d4: d4@3 {
+					reg = <3>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4r: a4r@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3rv: a3rv@6 {
+						reg = <6>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sm: a3sm@12 {
+						reg = <12>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sg: a3sg@13 {
+						reg = <13>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
new file mode 100644
index 000000000..961c0f2ee
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board development
+ * platform with camera daughter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21d-q7.dts"
+
+/ {
+	model = "iWave Systems RZ/G1H Qseven development platform with camera add-on";
+	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		serial3 = &scifb1;
+		serial5 = &hscif0;
+		ethernet1 = &ether;
+	};
+};
+
+&avb {
+	/* Pins shared with VIN0, keep status disabled */
+	status = "disabled";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_d";
+		function = "can0";
+	};
+
+	ether_pins: ether {
+		groups = "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data";
+		function = "scif1";
+	};
+
+	scifb1_pins: scifb1 {
+		groups = "scifb1_data";
+		function = "scifb1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scifb1 {
+	pinctrl-0 = <&scifb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
new file mode 100644
index 000000000..c2c05c968
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21m.dtsi"
+
+/ {
+	model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
+	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+	aliases {
+		serial2 = &scifa2;
+		serial4 = &scifb2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sdhi2_led {
+			label = "sdio-led";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	reg_1p5v: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p5v>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&gpio1 {
+	can-trx-en-gpio{
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can-trx-en-gpio";
+	};
+};
+
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+
+	flash1: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x00000000 0x00200000>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	/* Disable hsusb to enable USB2.0 host mode support on J2 */
+	/* status = "okay"; */
+};
+
+&pci1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pci2 {
+	/* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
+	/* status = "okay"; */
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	/* SW2[6] determines which connector is activated
+	 * ON = PCIe X4 (connector-J7)
+	 * OFF = mini-PCIe (connector-J26)
+	 */
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_b";
+		function = "i2c2";
+	};
+
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+		function = "msiof0";
+	};
+
+	scifa2_pins: scifa2 {
+		groups = "scifa2_data_c";
+		function = "scifa2";
+	};
+
+	scifb2_pins: scifb2 {
+		groups = "scifb2_data", "scifb2_ctrl";
+		function = "scifb2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1_pwen";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi4 &src4 &dvc1>;
+			capture = <&ssi3 &src3 &dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scifa2 {
+	pinctrl-0 = <&scifa2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifb2 {
+	pinctrl-0 = <&scifb2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
new file mode 100644
index 000000000..5621c9ed6
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave RZ/G1H Qseven SOM
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a7742.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g21m", "renesas,r8a7742";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&gpio0 {
+	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
+	qspi_en {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "QSPI_EN";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pfc {
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc1_pins: mmc1 {
+		groups = "mmc1_data4", "mmc1_ctrl";
+		function = "mmc1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bootloader";
+				reg = <0x00000000 0x000c0000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "env";
+				reg = <0x000c0000 0x00002000>;
+			};
+			partition@c2000 {
+				label = "user";
+				reg = <0x000c2000 0x0013e000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
new file mode 100644
index 000000000..6a78c8130
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -0,0 +1,1885 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7742 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7742-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7742-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7742";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU2>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU3>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU2>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU3>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7742_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7742_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7742-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7742";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7742", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7742-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7742-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7742-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7742", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7742",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7742",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7742",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7742",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7742",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7742",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0: sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1: sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2: sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
+		};
+
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic2: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6520000 0 0x425>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+			       <&dmac1 0x69>, <&dmac1 0x6a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7742",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7742",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7742-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7742-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7742",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7742", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e56000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e56000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7742",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7742",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c90000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6c90000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 215>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+			       <&dmac1 0x45>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7742",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7742",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7742_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7742", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7742",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7742",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7742",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7742",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7742",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7742_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7742",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0b0000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0b0000 0 0xc00>,
+			      <0 0xee0a0000 0 0x1100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci2: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <2 2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x20800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x21000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee120000 0 0x328>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+			       <&dmac1 0xc9>, <&dmac1 0xca>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7742",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		mmcif1: mmc@ee220000 {
+			compatible = "renesas,mmcif-r8a7742",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee220000 0 0x80>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 305>;
+			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+			       <&dmac1 0xe1>, <&dmac1 0xe2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 305>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7742",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7742",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7742",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7742",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe920000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 130>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 130>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7742";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7742-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds@feb94000 {
+			compatible = "renesas,r8a7742-lvds";
+			reg = <0 0xfeb94000 0 0x14>;
+			clocks = <&cpg CPG_MOD 725>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 725>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7742-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7742-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 000000000..0d006aea9
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+	model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
+};
+
+&pciec {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
new file mode 100644
index 000000000..498e223a5
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1M Qseven board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+
+/ {
+	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
+};
+
+&pciec {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
new file mode 100644
index 000000000..b3fee1d61
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZG1M-20M Qseven SOM
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+#include "r8a7743.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g20m", "renesas,r8a7743";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x20000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	mmcif0_pins: mmc {
+		groups = "mmc_data8_b", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
new file mode 100644
index 000000000..807e7d0d6
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SK-RZG1M board
+ *
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a7743.dtsi"
+
+/ {
+	model = "SK-RZG1M";
+	compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
new file mode 100644
index 000000000..f444e418f
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -0,0 +1,1794 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016-2017 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7743";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7743-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7743",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7743";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7743", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7743-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7743-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7743-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7743-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7743", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7743",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7743",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2:	sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7743",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7743",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7743",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7743";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7743",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7743",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7743-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7743-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7743",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7743", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 917>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7743",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7743",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7743",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7743",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7743",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 000>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7743",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 208>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7743",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 205>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7743",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7743_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7743",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7743_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7743",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7743",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7743",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7743",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7743_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6", "src.5",
+				      "src.4", "src.3", "src.2", "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7743",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7743",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7743",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7743",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7743",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7743",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7743",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7743",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			max-frequency = <97500000>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7743",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7743",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7743";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7743-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7743-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7743-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
new file mode 100644
index 000000000..3e58c2e92
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7-dbcm-ca.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave Systems RZ/G1N Qseven board development
+ * platform with camera daughter board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+#include "iwg20d-q7-dbcm-ca.dtsi"
+
+/ {
+	model = "iWave Systems RZ/G1N Qseven development platform with camera add-on";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
new file mode 100644
index 000000000..1fdac528f
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20d-q7.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1N Qseven board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7744-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
+
+/ {
+	model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1N";
+	compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744";
+};
diff --git a/arch/arm/boot/dts/r8a7744-iwg20m.dtsi b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
new file mode 100644
index 000000000..82ee3c114
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744-iwg20m.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave RZ/G1N Qseven SOM
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include "r8a7744.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g20m", "renesas,r8a7744";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	mmcif0_pins: mmc {
+		groups = "mmc_data8_b", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
new file mode 100644
index 000000000..0442aad4f
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -0,0 +1,1780 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7744 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7744-cpg-mssr.h>
+#include <dt-bindings/power/r8a7744-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7744";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7744_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+			power-domains = <&sysc R8A7744_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7744_PD_CA15_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7744-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7744",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7744";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7744", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7744-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7744-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7744-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7744-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7744", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7744",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7744",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2:	sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7744",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7744";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7744",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7744",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7744-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7744-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7744",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7744", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 917>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7744",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7744",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7744",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7744",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7744_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 000>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 208>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7744",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 205>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7744",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7744",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7744_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7744",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7744",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7744",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7744",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7744_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6", "src.5",
+				      "src.4", "src.3", "src.2", "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7744",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7744",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7744",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7744",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7744",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7744",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			max-frequency = <97500000>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7744",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7744";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7744-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7744-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7744-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
new file mode 100644
index 000000000..b1f679da3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter
+ * board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+#include "r8a7745-iwg22d-sodimm.dts"
+
+/ {
+	model = "iWave RainboW-G22D-SODIMM RZ/G1E based board with HDMI add-on";
+	compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
+
+	aliases {
+		serial0 = &scif1;
+		serial4 = &scif5;
+		serial6 = &hscif2;
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
+		pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lcd_panel {
+	status = "disabled";
+
+	/delete-node/ port;
+};
+
+&pfc {
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data";
+		function = "hscif2";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1_d";
+		function = "i2c1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data";
+		function = "scif1";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_d";
+		function = "scif5";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
new file mode 100644
index 000000000..1c7b37a01
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZG1E SODIMM carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7745-iwg22m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E";
+	compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745";
+
+	aliases {
+		ethernet0 = &avb;
+		serial3 = &scif4;
+		serial5 = &hscif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial3:115200n8";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	lcd_panel: lcd {
+		compatible = "edt,etm043080dh6gp";
+		power-supply = <&vccq_panel>;
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&du_out_rgb0>;
+			};
+		};
+	};
+
+	vccq_panel: regulator-vccq-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "Panel VccQ";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+	/*
+	 * On some older versions of the platform (before R4.0) the phy address
+	 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
+	 */
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* ADC conversion time: 80 clocks */
+		st,sample-time = <4>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	backlight_pins: backlight {
+		groups = "tpu_to3_c";
+		function = "tpu";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data", "hscif1_ctrl";
+		function = "hscif1";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5_b";
+		function = "i2c5";
+	};
+
+	scif4_pins: scif4 {
+		groups = "scif4_data_b";
+		function = "scif4";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi3 &src3 &dvc0>;
+			capture = <&ssi4 &src4 &dvc1>;
+		};
+	};
+};
+
+&scif4 {
+	pinctrl-0 = <&scif4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&tpu {
+	pinctrl-0 = <&backlight_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
new file mode 100644
index 000000000..41f111b99
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+#include "r8a7745.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g22m", "renesas,r8a7745";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	mmcif0_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data2";
+		function = "qspi";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3_b";
+		function = "i2c3";
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
new file mode 100644
index 000000000..db72a801a
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SK-RZG1E board
+ *
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a7745.dtsi"
+
+/ {
+	model = "SK-RZG1E";
+	compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
new file mode 100644
index 000000000..0f14ac229
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -0,0 +1,1586 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016-2017 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7745";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &iic0;
+		i2c7 = &iic1;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
+	/*
+	 * The external audio clocks are configured  as 0 Hz fixed
+	 * frequency clocks by default.  Boards that provide audio
+	 * clocks should override them.
+	 */
+	audio_clka: audio_clka {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkb: audio_clkb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkc: audio_clkc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+			power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+			power-domains = <&sysc R8A7745_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7745",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7745";
+			reg = <0 0xe6060000 0 0x11c>;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7745", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7745-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7745-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7745-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7745-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7745-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7745", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7745",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2:	sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
+		};
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7745",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7745",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7745",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7745",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7745",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7745-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7745-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7745",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7745", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 917>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 0x40>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7745",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 0x40>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7745",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7745",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7745",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7745",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 000>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7745",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 208>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7745",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 205>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7745",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7745_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7745",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7745_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7745",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7745",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7745",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+				 <&cpg CPG_CORE R8A7745_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.6", "src.5", "src.4", "src.3",
+				      "src.2", "src.1",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
+				 <&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
+				 <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src-0 {
+					status = "disabled";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7745",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7745",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7745",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7745",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7745",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7745",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7745",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			max-frequency = <97500000>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7745",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7745";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7745-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7745-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
new file mode 100644
index 000000000..8ac61b50a
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1C single board computer
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "r8a77470.dtsi"
+/ {
+	model = "iWave iW-RainboW-G23S single board computer based on RZ/G1C";
+	compatible = "iwave,g23s", "renesas,r8a77470";
+
+	aliases {
+		ethernet0 = &avb;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial1:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	reg_1p8v: reg-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: reg-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&gpio2 {
+	interrupt-fixup {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "hdmi-hpd-int";
+		input;
+	};
+};
+
+&hsusb0 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				bridge_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii_tx_rx";
+		function = "avb";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_e";
+		function = "i2c4";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3_c";
+		function = "i2c3";
+	};
+
+	mmc_pins_uhs: mmc_uhs {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data2";
+		function = "qspi0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_b";
+		function = "scif1";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&qspi0 {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "issi,is25lp016d", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&mmc_pins_uhs>;
+	pinctrl-names = "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
new file mode 100644
index 000000000..691b1a131
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -0,0 +1,1025 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a77470 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
+/ {
+	compatible = "renesas,r8a77470";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+			power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+			power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A77470_PD_CA7_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77470-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 30>;
+			gpio-reserved-ranges = <17 10>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77470",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77470";
+			reg = <0 0xe6060000 0 0x118>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77470-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a77470-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77470-rst";
+			reg = <0 0xe6160000 0 0x100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77470-sysc";
+			reg = <0 0xe6180000 0 0x200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a77470", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2:	sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x20000>;
+		};
+
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77470",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hsusb0: hsusb@e6590000 {
+			compatible = "renesas,usbhs-r8a77470",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac00 0>, <&usb_dmac00 1>,
+			       <&usb_dmac10 0>, <&usb_dmac10 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		usbphy0: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a77470",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+		};
+
+		hsusb1: hsusb@e6598000 {
+			compatible = "renesas,usbhs-r8a77470",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6598000 0 0x100>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>;
+			dmas = <&usb_dmac01 0>, <&usb_dmac01 1>,
+			       <&usb_dmac11 0>, <&usb_dmac11 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <4>;
+			/* We need to turn on usbphy0 to make usbphy1 to work */
+			phys = <&usb1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			status = "disabled";
+		};
+
+		usbphy1: usb-phy@e6598100 {
+			compatible = "renesas,usb-phy-r8a77470",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6598100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 706>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			status = "disabled";
+
+			usb1: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac00: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77470-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac10: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77470-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac01: dma-controller@e65a8000 {
+			compatible = "renesas,r8a77470-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a8000 0 0x100>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 326>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 326>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac11: dma-controller@e65b8000 {
+			compatible = "renesas,r8a77470-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b8000 0 0x100>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 327>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 327>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77470",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a77470",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77470",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi0: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a77470", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 918>;
+			status = "disabled";
+		};
+
+		qspi1: spi@ee200000 {
+			compatible = "renesas,qspi-r8a77470", "renesas,qspi";
+			reg = <0 0xee200000 0 0x2c>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&cpg 917>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 0x40>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 0x40>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a77470",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 0x40>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a77470",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a77470",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a77470",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 0x60>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>,
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77470", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77470",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77470",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb0 0>, <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb0 0>, <&usb2_phy0>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77470";
+			reg = <0 0xee080200 0 0x700>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>;
+			phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>;
+			phys = <&usb0 1>, <&usb2_phy1>, <&usb1 0>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a77470";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 705>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77470",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <156000000>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee300000 {
+			compatible = "renesas,sdhi-mmc-r8a77470";
+			reg = <0 0xee300000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <156000000>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77470",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x328>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <78000000>;
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77470";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a77470-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77470-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
new file mode 100644
index 000000000..6c7b07c4b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ */
+
+/dts-v1/;
+#include "r8a7778.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw", "renesas,r8a7778";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&bsc {
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <33333333>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	camera@41 {
+		compatible = "oki,ml86v7667";
+		reg = <0x41>;
+	};
+
+	camera@43 {
+		compatible = "oki,ml86v7667";
+		reg = <0x43>;
+	};
+
+	rx8581: rtc@51 {
+		compatible = "epson,rx8581";
+		reg = <0x51>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	broken-cd;
+	status = "okay";
+};
+
+&irqpin {
+	status = "okay";
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_a", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+	sdhi0_pup_pins: sd0_pup {
+		groups = "sdhi0_cd", "sdhi0_wp";
+		function = "sdhi0";
+		bias-pull-up;
+	};
+
+	hspi0_pins: hspi0 {
+		groups = "hspi0_a";
+		function = "hspi0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+};
+
+&rcar_sound {
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <4>;
+	status = "okay";
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&hspi0 {
+	pinctrl-0 = <&hspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl008k", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "data(spi)";
+				reg = <0x00000000 0x00100000>;
+			};
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
new file mode 100644
index 000000000..c9f873586
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -0,0 +1,668 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M1A (R8A77781) SoC
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ */
+
+#include <dt-bindings/clock/r8a7778-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7778";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <800000000>;
+			clocks = <&z_clk>;
+		};
+	};
+
+	aliases {
+		spi0 = &hspi0;
+		spi1 = &hspi1;
+		spi2 = &hspi2;
+	};
+
+	bsc: bus@1c000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x1c000000>;
+	};
+
+	ether: ethernet@fde00000 {
+		compatible = "renesas,ether-r8a7778",
+			     "renesas,rcar-gen1-ether";
+		reg = <0xfde00000 0x400>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fe438000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfe438000 0x1000>,
+		      <0xfe430000 0x100>;
+	};
+
+	/* irqpin: IRQ0 - IRQ3 */
+	irqpin: interrupt-controller@fe78001c {
+		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		status = "disabled"; /* default off */
+		reg =	<0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>,
+			<0xfe780000 4>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		sense-bitfield-width = <2>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
+		reg = <0xffc40000 0x2c>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
+		reg = <0xffc41000 0x2c>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
+		reg = <0xffc42000 0x2c>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
+		reg = <0xffc43000 0x2c>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,rcar-gen1-gpio";
+		reg = <0xffc44000 0x2c>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 27>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	pfc: pinctrl@fffc0000 {
+		compatible = "renesas,pfc-r8a7778";
+		reg = <0xfffc0000 0x118>;
+	};
+
+	i2c0: i2c@ffc70000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
+		reg = <0xffc70000 0x1000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ffc71000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
+		reg = <0xffc71000 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ffc72000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
+		reg = <0xffc72000 0x1000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ffc73000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778", "renesas,rcar-gen1-i2c";
+		reg = <0xffc73000 0x1000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@ffd81000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd81000 0x30>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu2: timer@ffd82000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd82000 0x30>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	rcar_sound: sound@ffd90000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
+		reg =	<0xffd90000 0x1000>,	/* SRU */
+			<0xffd91000 0x240>,	/* SSI */
+			<0xfffe0000 0x24>;	/* ADG */
+		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
+			<&mstp3_clks R8A7778_CLK_SSI7>,
+			<&mstp3_clks R8A7778_CLK_SSI6>,
+			<&mstp3_clks R8A7778_CLK_SSI5>,
+			<&mstp3_clks R8A7778_CLK_SSI4>,
+			<&mstp0_clks R8A7778_CLK_SSI3>,
+			<&mstp0_clks R8A7778_CLK_SSI2>,
+			<&mstp0_clks R8A7778_CLK_SSI1>,
+			<&mstp0_clks R8A7778_CLK_SSI0>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC8>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC7>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC6>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC5>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC4>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC3>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC2>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC1>,
+			<&mstp5_clks R8A7778_CLK_SRU_SRC0>,
+			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+			<&cpg_clocks R8A7778_CLK_S1>;
+		clock-names = "ssi.8", "ssi.7", "ssi.6", "ssi.5", "ssi.4",
+			"ssi.3", "ssi.2", "ssi.1", "ssi.0",
+			"src.8", "src.7", "src.6", "src.5", "src.4",
+			"src.3", "src.2", "src.1", "src.0",
+			"clk_a", "clk_b", "clk_c", "clk_i";
+
+		status = "disabled";
+
+		rcar_sound,src {
+			src3: src-3 { };
+			src4: src-4 { };
+			src5: src-5 { };
+			src6: src-6 { };
+			src7: src-7 { };
+			src8: src-8 { };
+			src9: src-9 { };
+		};
+
+		rcar_sound,ssi {
+			ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+		};
+	};
+
+	scif0: serial@ffe40000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe40000 0x100>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif1: serial@ffe41000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe41000 0x100>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif2: serial@ffe42000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe42000 0x100>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif3: serial@ffe43000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe43000 0x100>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif4: serial@ffe44000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe44000 0x100>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif5: serial@ffe45000 {
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe45000 0x100>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hscif0: serial@ffe48000 {
+		compatible = "renesas,hscif-r8a7778",
+			     "renesas,rcar-gen1-hscif", "renesas,hscif";
+		reg = <0xffe48000 96>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>,
+			 <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hscif1: serial@ffe49000 {
+		compatible = "renesas,hscif-r8a7778",
+			     "renesas,rcar-gen1-hscif", "renesas,hscif";
+		reg = <0xffe49000 96>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>,
+			 <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	mmcif: mmc@ffe4e000 {
+		compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif";
+		reg = <0xffe4e000 0x100>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_MMC>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	sdhi0: mmc@ffe4c000 {
+		compatible = "renesas,sdhi-r8a7778",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	sdhi1: mmc@ffe4d000 {
+		compatible = "renesas,sdhi-r8a7778",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4d000 0x100>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	sdhi2: mmc@ffe4f000 {
+		compatible = "renesas,sdhi-r8a7778",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4f000 0x100>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hspi0: spi@fffc7000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc7000 0x18>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	hspi1: spi@fffc8000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc8000 0x18>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	hspi2: spi@fffc6000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc6000 0x18>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External input clock */
+		extal_clk: extal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@ffc80000 {
+			compatible = "renesas,r8a7778-cpg-clocks";
+			reg = <0xffc80000 0x80>;
+			#clock-cells = <1>;
+			clocks = <&extal_clk>;
+			clock-output-names = "plla", "pllb", "b",
+					     "out", "p", "s", "s1";
+			#power-domain-cells = <0>;
+		};
+
+		/* Audio clocks; frequencies are set by boards if applicable. */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		/* Fixed ratio clocks */
+		g_clk: g {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+		};
+		i_clk: i {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+		s3_clk: s3 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+		s4_clk: s4 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7778_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		z_clk: z {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7778_CLK_PLLB>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@ffc80030 {
+			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xffc80030 4>;
+			clocks = <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_S>,
+				 <&cpg_clocks R8A7778_CLK_S>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_S>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7778_CLK_I2C0 R8A7778_CLK_I2C1
+				R8A7778_CLK_I2C2 R8A7778_CLK_I2C3
+				R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1
+				R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3
+				R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5
+				R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1
+				R8A7778_CLK_TMU0 R8A7778_CLK_TMU1
+				R8A7778_CLK_TMU2 R8A7778_CLK_SSI0
+				R8A7778_CLK_SSI1 R8A7778_CLK_SSI2
+				R8A7778_CLK_SSI3 R8A7778_CLK_SRU
+				R8A7778_CLK_HSPI
+			>;
+			clock-output-names =
+				"i2c0", "i2c1", "i2c2", "i2c3", "scif0",
+				"scif1", "scif2", "scif3", "scif4", "scif5",
+				"hscif0", "hscif1",
+				"tmu0", "tmu1", "tmu2", "ssi0", "ssi1",
+				"ssi2", "ssi3", "sru", "hspi";
+		};
+		mstp1_clks: mstp1_clks@ffc80034 {
+			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xffc80034 4>, <0xffc80044 4>;
+			clocks = <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_S>,
+				 <&cpg_clocks R8A7778_CLK_S>,
+				 <&cpg_clocks R8A7778_CLK_P>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7778_CLK_ETHER R8A7778_CLK_VIN0
+				R8A7778_CLK_VIN1 R8A7778_CLK_USB
+			>;
+			clock-output-names =
+				"ether", "vin0", "vin1", "usb";
+		};
+		mstp3_clks: mstp3_clks@ffc8003c {
+			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xffc8003c 4>;
+			clocks = <&s4_clk>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7778_CLK_MMC R8A7778_CLK_SDHI0
+				R8A7778_CLK_SDHI1 R8A7778_CLK_SDHI2
+				R8A7778_CLK_SSI4 R8A7778_CLK_SSI5
+				R8A7778_CLK_SSI6 R8A7778_CLK_SSI7
+				R8A7778_CLK_SSI8
+			>;
+			clock-output-names =
+				"mmc", "sdhi0", "sdhi1", "sdhi2", "ssi4",
+				"ssi5", "ssi6", "ssi7", "ssi8";
+		};
+		mstp5_clks: mstp5_clks@ffc80054 {
+			compatible = "renesas,r8a7778-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xffc80054 4>;
+			clocks = <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>,
+				 <&cpg_clocks R8A7778_CLK_P>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7778_CLK_SRU_SRC0 R8A7778_CLK_SRU_SRC1
+				R8A7778_CLK_SRU_SRC2 R8A7778_CLK_SRU_SRC3
+				R8A7778_CLK_SRU_SRC4 R8A7778_CLK_SRU_SRC5
+				R8A7778_CLK_SRU_SRC6 R8A7778_CLK_SRU_SRC7
+				R8A7778_CLK_SRU_SRC8
+			>;
+			clock-output-names =
+				"sru-src0", "sru-src1", "sru-src2",
+				"sru-src3", "sru-src4", "sru-src5",
+				"sru-src6", "sru-src7", "sru-src8";
+		};
+	};
+
+	rst: reset-controller@ffcc0000 {
+		compatible = "renesas,r8a7778-reset-wdt";
+		reg = <0xffcc0000 0x40>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
new file mode 100644
index 000000000..465845323
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ */
+
+/dts-v1/;
+#include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &scif4;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18000000 0x100>;
+		pinctrl-0 = <&ethernet_pins>;
+		pinctrl-names = "default";
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led2 {
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				vga_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				vga_enc_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&vga_enc_out>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_connector: endpoint {
+				};
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
+	clock-names = "du.0", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&vga_enc_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lvds_enc_in>;
+			};
+		};
+	};
+};
+
+&irqpin0 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <31250000>;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		du0 {
+			groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
+			function = "du0";
+		};
+		du1 {
+			groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+			function = "du1";
+		};
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+
+	ethernet_pins: ethernet {
+		intc {
+			groups = "intc_irq1_b";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_c";
+		function = "scif2";
+	};
+
+	scif4_pins: scif4 {
+		groups = "scif4_data";
+		function = "scif4";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		function = "sdhi0";
+	};
+
+	hspi0_pins: hspi0 {
+		groups = "hspi0";
+		function = "hspi0";
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif4 {
+	pinctrl-0 = <&scif4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&hspi0 {
+	pinctrl-0 = <&hspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
new file mode 100644
index 000000000..3c5fcdfe1
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H1 (R8A77790) SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ */
+
+#include <dt-bindings/clock/r8a7779-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7779-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7779";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
+			power-domains = <&sysc R8A7779_PD_ARM1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
+			power-domains = <&sysc R8A7779_PD_ARM2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg_clocks R8A7779_CLK_Z>;
+			power-domains = <&sysc R8A7779_PD_ARM3>;
+		};
+	};
+
+	aliases {
+		spi0 = &hspi0;
+		spi1 = &hspi1;
+		spi2 = &hspi2;
+	};
+
+	gic: interrupt-controller@f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
+	timer@f0000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xf0000600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc40000 0x2c>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc41000 0x2c>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc42000 0x2c>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc43000 0x2c>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc44000 0x2c>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc45000 0x2c>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio";
+		reg = <0xffc46000 0x2c>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	irqpin0: interrupt-controller@fe78001c {
+		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		status = "disabled";
+		interrupt-controller;
+		reg = <0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>,
+			<0xfe780000 4>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		sense-bitfield-width = <2>;
+	};
+
+	i2c0: i2c@ffc70000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
+		reg = <0xffc70000 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ffc71000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
+		reg = <0xffc71000 0x1000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ffc72000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
+		reg = <0xffc72000 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ffc73000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c";
+		reg = <0xffc73000 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif0: serial@ffe40000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe40000 0x100>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif1: serial@ffe41000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe41000 0x100>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif2: serial@ffe42000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe42000 0x100>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif3: serial@ffe43000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe43000 0x100>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif4: serial@ffe44000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe44000 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	scif5: serial@ffe45000 {
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
+		reg = <0xffe45000 0x100>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hscif0: serial@ffe48000 {
+		compatible = "renesas,hscif-r8a7779",
+			     "renesas,rcar-gen1-hscif", "renesas,hscif";
+		reg = <0xffe48000 96>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>,
+			 <&cpg_clocks R8A7779_CLK_S>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hscif1: serial@ffe49000 {
+		compatible = "renesas,hscif-r8a7779",
+			     "renesas,rcar-gen1-hscif", "renesas,hscif";
+		reg = <0xffe49000 96>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>,
+			 <&cpg_clocks R8A7779_CLK_S>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	pfc: pinctrl@fffc0000 {
+		compatible = "renesas,pfc-r8a7779";
+		reg = <0xfffc0000 0x23c>;
+	};
+
+	thermal@ffc48000 {
+		compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+		reg = <0xffc48000 0x38>;
+	};
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@ffd81000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd81000 0x30>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu2: timer@ffd82000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd82000 0x30>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
+		clock-names = "fck";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	sata: sata@fc600000 {
+		compatible = "renesas,sata-r8a7779";
+		reg = <0xfc600000 0x200000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi0: mmc@ffe4c000 {
+		compatible = "renesas,sdhi-r8a7779",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi1: mmc@ffe4d000 {
+		compatible = "renesas,sdhi-r8a7779",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4d000 0x100>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi2: mmc@ffe4e000 {
+		compatible = "renesas,sdhi-r8a7779",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4e000 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	sdhi3: mmc@ffe4f000 {
+		compatible = "renesas,sdhi-r8a7779",
+			     "renesas,rcar-gen1-sdhi";
+		reg = <0xffe4f000 0x100>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hspi0: spi@fffc7000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc7000 0x18>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hspi1: spi@fffc8000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc8000 0x18>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	hspi2: spi@fffc6000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc6000 0x18>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+	};
+
+	du: display@fff80000 {
+		compatible = "renesas,du-r8a7779";
+		reg = <0xfff80000 0x40000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: clocks@ffc80000 {
+			compatible = "renesas,r8a7779-cpg-clocks";
+			reg = <0xffc80000 0x30>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "plla", "z", "zs", "s",
+					     "s1", "p", "b", "out";
+			#power-domain-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		i_clk: i {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		s3_clk: s3 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		s4_clk: s4 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <16>;
+			clock-mult = <1>;
+		};
+		g_clk: g {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp0_clks: clocks@ffc80030 {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc80030 4>;
+			clocks = <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
+				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
+				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
+				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
+				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
+				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
+				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
+				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+			>;
+			clock-output-names =
+				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
+				"hscif0", "scif5", "scif4", "scif3", "scif2",
+				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
+				"i2c0";
+		};
+		mstp1_clks: clocks@ffc80034 {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc80034 4>, <0xffc80044 4>;
+			clocks = <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_USB01 R8A7779_CLK_USB2
+				R8A7779_CLK_DU R8A7779_CLK_VIN2
+				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
+				R8A7779_CLK_ETHER R8A7779_CLK_SATA
+				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
+			>;
+			clock-output-names =
+				"usb01", "usb2",
+				"du", "vin2",
+				"vin1", "vin0",
+				"ether", "sata",
+				"pcie", "vin3";
+		};
+		mstp3_clks: clocks@ffc8003c {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc8003c 4>;
+			clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
+				 <&s4_clk>, <&s4_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
+				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
+				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
+			>;
+			clock-output-names =
+				"sdhi3", "sdhi2", "sdhi1", "sdhi0",
+				"mmc1", "mmc0";
+		};
+	};
+
+	prr: chipid@ff000044 {
+		compatible = "renesas,prr";
+		reg = <0xff000044 4>;
+	};
+
+	rst: reset-controller@ffcc0000 {
+		compatible = "renesas,r8a7779-reset-wdt";
+		reg = <0xffcc0000 0x48>;
+	};
+
+	sysc: system-controller@ffd85000 {
+		compatible = "renesas,r8a7779-sysc";
+		reg = <0xffd85000 0x0200>;
+		#power-domain-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
new file mode 100644
index 000000000..1d6f0c5d0
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -0,0 +1,937 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager", "renesas,r8a7790";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scifa1;
+		i2c8 = &gpioi2c1;
+		i2c9 = &gpioi2c2;
+		i2c10 = &i2cexio0;
+		i2c11 = &i2cexio1;
+		i2c12 = &i2chdmi;
+		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@140000000 {
+		device_type = "memory";
+		reg = <1 0x40000000 0 0xc0000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		one {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		two {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+		three {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+		four {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-8 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
+	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
+	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
+	 * Note: For testing the I2C slave feature, it is convenient to connect this
+	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
+	 * instantiate the slave device at runtime according to the documentation.
+	 * You can then communicate with the slave via IIC3.
+	 *
+	 * IIC0/I2C0 does not appear to support fallback to GPIO.
+	 */
+	i2cexio0: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic0>, <&i2c0>;
+		i2c-bus-name = "i2c-exio0";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+	 * This is similar to the arangement described for i2cexio0 (above)
+	 * with a fallback to GPIO also provided.
+	 */
+	i2cexio1: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * IIC2 and I2C2 may be switched using pinmux.
+	 * A fallback to GPIO is also provided.
+	 */
+	i2chdmi: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin1ep0>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cec_clock>;
+			clock-names = "cec";
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&lvds0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+	};
+
+	/*
+	 * IIC3 and I2C3 may be switched using pinmux.
+	 * IIC3/I2C3 does not appear to support fallback to GPIO.
+	 */
+	i2cpwr: i2c-13 {
+		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
+		i2c-parent = <&iic3>, <&i2c3>;
+		i2c-bus-name = "i2c-pwr";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@58 {
+			compatible = "dlg,da9063";
+			reg = <0x58>;
+			interrupt-parent = <&irqc0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+
+			rtc {
+				compatible = "dlg,da9063-rtc";
+			};
+
+			wdt {
+				compatible = "dlg,da9063-watchdog";
+			};
+		};
+
+		vdd_dvfs: regulator@68 {
+			compatible = "dlg,da9210";
+			reg = <0x68>;
+			interrupt-parent = <&irqc0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	scifa1_pins: scifa1 {
+		groups = "scifa1_data";
+		function = "scifa1";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	mmc1_pins: mmc1 {
+		groups = "mmc1_data8", "mmc1_ctrl";
+		function = "mmc1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+				 "msiof1_tx";
+		function = "msiof1";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	iic0_pins: iic0 {
+		groups = "iic0";
+		function = "iic0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	iic1_pins: iic1 {
+		groups = "iic1";
+		function = "iic1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	iic2_pins: iic2 {
+		groups = "iic2";
+		function = "iic2";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	iic3_pins: iic3 {
+		groups = "iic3";
+		function = "iic3";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	hsusb_pins: hsusb {
+		groups = "usb0_ovc_vbus";
+		function = "usb0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&i2c0	{
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "i2c-exio0";
+};
+
+&iic0	{
+	pinctrl-0 = <&iic0_pins>;
+	pinctrl-names = "i2c-exio0";
+};
+
+&i2c1	{
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&iic1	{
+	pinctrl-0 = <&iic1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&i2c2	{
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&iic2	{
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&i2c3	{
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "i2c-pwr";
+};
+
+&iic3	{
+	pinctrl-0 = <&iic3_pins>;
+	pinctrl-names = "i2c-pwr";
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&xhci {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&pci2 {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin1ep0: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
new file mode 100644
index 000000000..6a457bc92
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Stout board
+ *
+ * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Stout";
+	compatible = "renesas,stout", "renesas,r8a7790";
+
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		};
+		led5 {
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fixedregulator3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	osc1_clk: osc1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	osc4_clk: osc4-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
+		 <&osc1_clk>;
+	clock-names = "du.0", "du.1", "du.2", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector0: endpoint {
+			};
+		};
+	};
+};
+
+&lvds1 {
+	ports {
+		port@1 {
+			lvds_connector1: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
+		function = "du";
+	};
+
+	scifa0_pins: scifa0 {
+		groups = "scifa0_data_b";
+		function = "scifa0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq1";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	iic2_pins: iic2 {
+		groups = "iic2_b";
+		function = "iic2";
+	};
+
+	iic3_pins: iic3 {
+		groups = "iic3";
+		function = "iic3";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "uboot";
+				reg = <0x00080000 0x00040000>;
+				read-only;
+			};
+			partition@c0000 {
+				label = "uboot-env";
+				reg = <0x000c0000 0x00040000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "flash";
+				reg = <0x00100000 0x03f00000>;
+			};
+		};
+	};
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic2	{
+	status = "okay";
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "default";
+
+	clock-frequency = <100000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&osc4_clk>;
+		clock-names = "cec";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&iic3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vdd: regulator@70 {
+		compatible = "dlg,da9210";
+		reg = <0x70>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
new file mode 100644
index 000000000..b0569b4ea
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -0,0 +1,1875 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7790-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7790";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &iic0;
+		i2c5 = &iic1;
+		i2c6 = &iic2;
+		i2c7 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		spi4 = &msiof3;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
+			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
+			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+			next-level-cache = <&L2_CA7>;
+			capacity-dmips-mhz = <539>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7790-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7790",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7790";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7790-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7790-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7790-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7790",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7790",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7790",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic2: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6520000 0 0x425>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+			       <&dmac1 0x69>, <&dmac1 0x6a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7790",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7790",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7790",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7790-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7790-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7790",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7790", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7790",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7790",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e56000 {
+			compatible = "renesas,scif-r8a7790",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e56000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7790",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7790",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c90000 {
+			compatible = "renesas,msiof-r8a7790",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6c90000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 215>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+			       <&dmac1 0x45>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7790",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7790",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7790",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7790",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7790_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7790",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7790",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0b0000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0b0000 0 0xc00>,
+			      <0 0xee0a0000 0 0x1100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci2: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7790",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <2 2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x20800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x21000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee120000 0 0x328>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+			       <&dmac1 0xc9>, <&dmac1 0xca>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7790",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7790",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		mmcif1: mmc@ee220000 {
+			compatible = "renesas,mmcif-r8a7790",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee220000 0 0x80>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 305>;
+			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+			       <&dmac1 0xe1>, <&dmac1 0xe2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 305>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7790",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7790",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7790",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7790",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe920000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 130>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 130>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 117>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7790",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7790";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		lvds1: lvds@feb94000 {
+			compatible = "renesas,r8a7790-lvds";
+			reg = <0 0xfeb94000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 725>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 725>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds1_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7790-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7790-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
new file mode 100644
index 000000000..6af1727b8
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -0,0 +1,902 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		i2c9 = &gpioi2c1;
+		i2c10 = &gpioi2c2;
+		i2c11 = &gpioi2c4;
+		i2c12 = &i2cexio1;
+		i2c13 = &i2chdmi;
+		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c2: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c4: i2c-11 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio1: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-exio1";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-13 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin1ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cec_clock>;
+			clock-names = "cec";
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_c";
+		function = "i2c4";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	msiof0_pins: msiof0 {
+		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		function = "msiof0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x00580000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "flash";
+				reg = <0x00600000 0x03a00000>;
+			};
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-exio1";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	status = "okay";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
new file mode 100644
index 000000000..bf51e29c7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4642
+ *
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Porter";
+	compatible = "renesas,porter", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+		i2c9 = &gpioi2c2;
+		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x14_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4642: codec@12 {
+			compatible = "asahi-kasei,ak4642";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader_prg";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user_prg";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash_fs";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@5a {
+		compatible = "dlg,da9063l";
+		reg = <0x5a>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pci1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec {
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
new file mode 100644
index 000000000..87f0d6dc3
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -0,0 +1,1888 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
+ *
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7791-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7791";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
+			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
+			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7791-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7791",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7791";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7791", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7791-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7791-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7791-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7791", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7791",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7791",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7791",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7791",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7791",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7791",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7791-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7791-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7791",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7791",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7791",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7791",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7791",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7791",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		adc: adc@e6e54000 {
+			compatible = "renesas,r8a7791-gyroadc",
+				     "renesas,rcar-gyroadc";
+			reg = <0 0xe6e54000 0 64>;
+			clocks = <&cpg CPG_MOD 901>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 901>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7791",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7791",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7791",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7791",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7791_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0", "src.9", "src.8",
+				      "src.7", "src.6", "src.5", "src.4",
+				      "src.3", "src.2", "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7791",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7791",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7791",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7791",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7791",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7791",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7791",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7791",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7791",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7791",
+				     "renesas,pcie-rcar-gen2";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7791",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7791";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7791-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7791-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7791-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
new file mode 100644
index 000000000..9368ac2cf
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Blanche";
+	compatible = "renesas,blanche", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&iic3 {
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
+		interrupt-parent = <&irqc>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
new file mode 100644
index 000000000..ba2d2a589
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Wheat board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wheat";
+	compatible = "renesas,wheat", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-out0 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con0: endpoint {
+				remote-endpoint = <&adv7513_0_out>;
+			};
+		};
+	};
+
+	hdmi-out1 {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con1: endpoint {
+				remote-endpoint = <&adv7513_1_out>;
+			};
+		};
+	};
+
+	osc2_clk: osc2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/*
+	 * The adv75xx resets its addresses to defaults during low power mode.
+	 * Because we have two ADV7513 devices on the same bus, we must change
+	 * both of them away from the defaults so that they do not conflict.
+	 */
+	hdmi@3d {
+		compatible = "adi,adv7513";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_0_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_0_out: endpoint {
+					remote-endpoint = <&hdmi_con0>;
+				};
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7513";
+		reg = <0x39>, <0x49>, <0x29>, <0x59>;
+		reg-names = "main", "edid", "cec", "packet";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_1_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_1_out: endpoint {
+					remote-endpoint = <&hdmi_con1>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7513_0_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7513_1_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
new file mode 100644
index 000000000..f5b299bfc
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -0,0 +1,925 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ */
+
+#include <dt-bindings/clock/r8a7792-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7792";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+		vin4 = &vin4;
+		vin5 = &vin5;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
+			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7792-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055100 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055100 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055200 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055200 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		gpio8: gpio@e6055300 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055300 0 0x50>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 256 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 921>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 921>;
+		};
+
+		gpio9: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+		};
+
+		gpio10: gpio@e6055500 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055500 0 0x50>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 320 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 914>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+		};
+
+		gpio11: gpio@e6055600 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055600 0 0x50>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 352 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 913>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7792";
+			reg = <0 0xe6060000 0 0x144>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7792-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7792-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7792-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* I2C doesn't need pinmux */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7792",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7792",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7792",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7792",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7792_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7792",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 000>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7792",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A7792_CLK_RCAN>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			status = "disabled";
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7792",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		vsp@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 127>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 127>;
+		};
+
+		jpu: jpeg-codec@fe980000 {
+			compatible = "renesas,jpu-r8a7792",
+				     "renesas,rcar-gen2-jpu";
+			reg = <0 0xfe980000 0 0x10300>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 106>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 106>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7792";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7792-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7792-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
new file mode 100644
index 000000000..2b59a0491
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Gose board
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7793.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gose";
+	compatible = "renesas,gose", "renesas,r8a7793";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		i2c9 = &gpioi2c2;
+		i2c10 = &gpioi2c4;
+		i2c11 = &i2chdmi;
+		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c2: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C2.
+	 */
+	i2chdmi: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c2>, <&gpioi2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180cp";
+			reg = <0x20>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7180_in: endpoint {
+						remote-endpoint = <&composite_con_in>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					adv7180_out: endpoint {
+						bus-width = <8>;
+						remote-endpoint = <&vin1ep>;
+					};
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con_out>;
+					};
+				};
+			};
+		};
+
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			default-input = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7612_in: endpoint {
+						remote-endpoint = <&hdmi_con_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					adv7612_out: endpoint {
+						remote-endpoint = <&vin0ep2>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-12 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_c";
+		function = "i2c4";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data_d";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_d";
+		function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq0";
+		function = "intc";
+	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	sound_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a";
+		function = "audio_clk";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin1 {
+		groups = "vin1_data8", "vin1_clk";
+		function = "vin1";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep2: endpoint {
+			remote-endpoint = <&adv7612_out>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180_out>;
+			bus-width = <8>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
new file mode 100644
index 000000000..f930f69f7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -0,0 +1,1468 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
+ *
+ * Copyright (C) 2014-2015 Renesas Electronics Corporation
+ */
+
+#include <dt-bindings/clock/r8a7793-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7793-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7793";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
+			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7793-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7793",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 904>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 904>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7793";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		/* Special CPG clocks */
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7793-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7793-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7793-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7793", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7793",
+				     "renesas,rcar-gen2-thermal",
+				     "renesas,rcar-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xffc80000 0 0x1000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7793",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7793",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e60b0000 {
+			/* doesn't need pinmux */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7793",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7793",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7793",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7793",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7793",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7793",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7793",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7793",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7793",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7793_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7793",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7793",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7793",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7793",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+				<0 0xf1002000 0 0x2000>,
+				<0 0xf1004000 0 0x2000>,
+				<0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 118>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7793";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7793-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7793-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7793-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
new file mode 100644
index 000000000..32025986b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Alt board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Alt";
+	compatible = "renesas,alt", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+		i2c9 = &gpioi2c1;
+		i2c10 = &gpioi2c4;
+		i2c11 = &i2chdmi;
+		i2c12 = &i2cexio4;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	};
+
+	gpioi2c4: i2c-10 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C1.
+	 */
+	i2chdmi: i2c-11 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
+	/*
+	 * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+	 * A fallback to GPIO is provided.
+	 */
+	i2cexio4: i2c-14 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c4>, <&gpioi2c4>;
+		i2c-bus-name = "i2c-exio4";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&pfc {
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "i2c-exio4";
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "system";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
new file mode 100644
index 000000000..af066ee5e
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SILK board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014-2015 Renesas Solutions Corp.
+ * Copyright (C) 2014-2015 Cogent Embedded, Inc.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SILK";
+	compatible = "renesas,silk", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+		i2c9 = &gpioi2c1;
+		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-3 {
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-6 {
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_6>;
+			label = "SW6";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW12-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW12-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW12-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW12-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
+
+	gpioi2c1: i2c-9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		status = "disabled";
+		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	/*
+	 * A fallback to GPIO is provided for I2C1.
+	 */
+	i2chdmi: i2c-10 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&i2c1>, <&gpioi2c1>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: codec@12 {
+			compatible = "asahi-kasei,ak4643";
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_rgb0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+
+		eeprom@50 {
+			compatible = "renesas,r1ex24002", "atmel,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		groups = "eth_link", "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		groups = "intc_irq8";
+		function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+
+	vin0_pins: vin0 {
+		groups = "vin0_data8", "vin0_clk";
+		function = "vin0";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+		function = "du1";
+	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <400000>;
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
new file mode 100644
index 000000000..cd5e29040
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -0,0 +1,1434 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ */
+
+#include <dt-bindings/clock/r8a7794-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7794-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7794";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clka: audio_clka {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkb: audio_clkb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clkc: audio_clkc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "renesas,apmu";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
+			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA7: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7794-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7794",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7794";
+			reg = <0 0xe6060000 0 0x11c>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7794-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		apmu@e6151000 {
+			compatible = "renesas,r8a7794-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu0 &cpu1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7794-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7794-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc0: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7794", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		ipmmu_sy0: iommu@e6280000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6280000 0 0x1000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_sy1: iommu@e6290000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6290000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe6740000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: iommu@ec680000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xec680000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mx: iommu@fe951000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xfe951000 0 0x1000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_gp: iommu@e62a0000 {
+			compatible = "renesas,ipmmu-r8a7794",
+				     "renesas,ipmmu-vmsa";
+			reg = <0 0xe62a0000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		icram0:	sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1:	sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		/* The memory map in the User's Manual maps the cores to
+		 * bus numbers
+		 */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7794",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 925>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 925>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e6500000 {
+			compatible = "renesas,iic-r8a7794",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6510000 {
+			compatible = "renesas,iic-r8a7794",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7794",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7794",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7794",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 64>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifa3: serial@e6c70000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c70000 0 64>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1106>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+			       <&dmac1 0x1b>, <&dmac1 0x1c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
+			status = "disabled";
+		};
+
+		scifa4: serial@e6c78000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c78000 0 64>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1107>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+			       <&dmac1 0x1f>, <&dmac1 0x20>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
+			status = "disabled";
+		};
+
+		scifa5: serial@e6c80000 {
+			compatible = "renesas,scifa-r8a7794",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c80000 0 64>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1108>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+			       <&dmac1 0x23>, <&dmac1 0x24>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7794",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6ee0000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee0000 0 64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+			       <&dmac1 0xfb>, <&dmac1 0xfc>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6ee8000 {
+			compatible = "renesas,scif-r8a7794",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ee8000 0 64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+			       <&dmac1 0xfd>, <&dmac1 0xfe>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e62d0000 {
+			compatible = "renesas,hscif-r8a7794",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62d0000 0 96>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+			       <&dmac1 0x3b>, <&dmac1 0x3c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7794",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7794",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7794",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7794",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7794",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+				 <&cpg CPG_CORE R8A7794_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.6", "src.5", "src.4", "src.3",
+				      "src.2", "src.1",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src-0 {
+					status = "disabled";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7794",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7794",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7794",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x10800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x11000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7794",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7794",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7794",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>,
+			      <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>,
+			      <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vsp@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 131>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 131>;
+		};
+
+		vsp@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 128>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 128>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 119>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7794";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7794-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7794-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
new file mode 100644
index 000000000..79fce67eb
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa104xd12", "panel-lvds";
+
+		width-mm = <210>;
+		height-mm = <158>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			/* 1024x768 @65Hz */
+			clock-frequency = <65000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hsync-len = <136>;
+			hfront-porch = <20>;
+			hback-porch = <160>;
+			vfront-porch = <3>;
+			vback-porch = <29>;
+			vsync-len = <6>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
new file mode 100644
index 000000000..6e7589ea7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa121td01", "panel-lvds";
+
+		width-mm = <261>;
+		height-mm = <163>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			/* 1280x800 @60Hz */
+			clock-frequency = <71000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hsync-len = <70>;
+			hfront-porch = <20>;
+			hback-porch = <70>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <15>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
new file mode 100644
index 000000000..4e57ae268
--- /dev/null
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-DB Board
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ */
+
+/dts-v1/;
+
+#include "r9a06g032.dtsi"
+
+/ {
+	model = "RZN1D-DB Board";
+	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
new file mode 100644
index 000000000..c47896e4a
--- /dev/null
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032)
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+/ {
+	compatible = "renesas,r9a06g032";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clocks = <&sysctrl R9A06G032_CLK_A7MP>;
+			enable-method = "renesas,r9a06g032-smp";
+			cpu-release-addr = <0 0x4000c204>;
+		};
+	};
+
+	ext_jtag_clk: extjtagclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ext_mclk: extmclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+	};
+
+	ext_rgmii_ref: extrgmiiref {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ext_rtc_clk: extrtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		sysctrl: system-controller@4000c000 {
+			compatible = "renesas,r9a06g032-sysctrl";
+			reg = <0x4000c000 0x1000>;
+			status = "okay";
+			#clock-cells = <1>;
+
+			clocks = <&ext_mclk>, <&ext_rtc_clk>,
+					<&ext_jtag_clk>, <&ext_rgmii_ref>;
+			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+		};
+
+		uart0: serial@40060000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+			reg = <0x40060000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@40061000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+			reg = <0x40061000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@40062000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+			reg = <0x40062000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@50000000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50000000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: serial@50001000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50001000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart5: serial@50002000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50002000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart6: serial@50003000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50003000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart7: serial@50004000 {
+			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+			reg = <0x50004000 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
+			clock-names = "baudclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@40067000 {
+			compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+			reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+			clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+			clock-names = "bus";
+			status = "okay";
+		};
+
+		gic: interrupt-controller@44101000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x44101000 0x1000>, /* Distributer */
+			      <0x44102000 0x2000>, /* CPU interface */
+			      <0x44104000 0x2000>, /* Virt interface control */
+			      <0x44106000 0x2000>; /* Virt CPU interface */
+			interrupts =
+				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	timer {
+		compatible = "arm,cortex-a7-timer",
+			     "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+		interrupts =
+			<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
new file mode 100644
index 000000000..98e34248a
--- /dev/null
+++ b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2018 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "rda8810pl.dtsi"
+
+/ {
+	compatible = "xunlong,orangepi-2g-iot", "rda,8810pl";
+	model = "Orange Pi 2G-IoT";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:921600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	uart_clk: uart-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart2 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
new file mode 100644
index 000000000..728f76931
--- /dev/null
+++ b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2018 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "rda8810pl.dtsi"
+
+/ {
+	compatible = "xunlong,orangepi-i96", "rda,8810pl";
+	model = "Orange Pi i96";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart1;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:921600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	uart_clk: uart-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart2 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart_clk>;
+};
diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi
new file mode 100644
index 000000000..f30d6ece4
--- /dev/null
+++ b/arch/arm/boot/dts/rda8810pl.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RDA8810PL SoC
+ *
+ * Copyright (c) 2017 Andreas Färber
+ * Copyright (c) 2018 Manivannan Sadhasivam
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "rda,8810pl";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	modem@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10000000 0xfffffff>;
+
+		gpioc@1a08000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x1a08000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+		};
+	};
+
+	apb@20800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x20800000 0x100000>;
+
+		intc: interrupt-controller@0 {
+			compatible = "rda,8810pl-intc";
+			reg = <0x0 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	apb@20900000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x20900000 0x100000>;
+
+		timer@10000 {
+			compatible = "rda,8810pl-timer";
+			reg = <0x10000 0x1000>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hwtimer", "ostimer";
+		};
+
+		gpioa@30000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x30000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpiob@31000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x31000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpiod@32000 {
+			compatible = "rda,8810pl-gpio";
+			reg = <0x32000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	apb@20a00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x20a00000 0x100000>;
+
+		uart1: serial@0 {
+			compatible = "rda,8810pl-uart";
+			reg = <0x0 0x1000>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@10000 {
+			compatible = "rda,8810pl-uart";
+			reg = <0x10000 0x1000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@90000 {
+			compatible = "rda,8810pl-uart";
+			reg = <0x90000 0x1000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+	l2: cache-controller@21100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x21100000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 000000000..ea23ba986
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 Evaluation board";
+	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
new file mode 100644
index 000000000..e817eba8c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 KylinBoard";
+	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+			label = "kylin:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - SDIO_RESET_L_WL_RST
+		 * - SDIO_RESET_L_BT_EN
+		 */
+		reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+			      <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */
+			      <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rt5616-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC1", "Microphone Jack",
+			"MIC2", "Microphone Jack",
+			"Microphone Jack", "micbias1",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&acodec {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&emmc {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vout5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vout5";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rt5616: rt5616@1b {
+		compatible = "rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	rockchip,default-sample-phase = <90>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	suspend {
+		global_pwroff: global-pwroff {
+			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 000000000..093567022
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi = &spi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	gpu: gpu@10090000 {
+		compatible = "rockchip,rk3036-mali", "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0";
+		assigned-clocks = <&cru SCLK_GPU>;
+		assigned-clock-rates = <100000000>;
+		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU>;
+		status = "disabled";
+	};
+
+	vop: vop@10118000 {
+		compatible = "rockchip,rk3036-vop";
+		reg = <0x10118000 0x19c>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@10118300 {
+		compatible = "rockchip,iommu";
+		reg = <0x10118300 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x2000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@10214000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio: mmc@10218000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@1021c000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		rockchip,default-sample-phase = <158>;
+		disable-wp;
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		mmc-ddr-1_8v;
+		non-removable;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	i2s: i2s@10220000 {
+		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x4000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
+		reg = <0x20008000 0x1000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1d8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru PCLK_ACODEC>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3036-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI>;
+		clock-names = "pclk";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_ctl>;
+		status = "disabled";
+
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vop: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vop_out_hdmi>;
+			};
+		};
+	};
+
+	timer: timer@20044000 {
+		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	spi: spi@20074000 {
+		compatible = "rockchip,rockchip-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
+		clock-names = "apb-pclk","spi_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+						<1 RK_PC3 1 &pcfg_pull_default>,
+						<1 RK_PC4 1 &pcfg_pull_default>,
+						<1 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		sdio {
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
+						<0 RK_PB4 1 &pcfg_pull_default>,
+						<0 RK_PB5 1 &pcfg_pull_default>,
+						<0 RK_PB6 1 &pcfg_pull_default>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			sdio_clk: sdio-clk {
+				rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
+			};
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>,
+						<1 RK_PD4 2 &pcfg_pull_default>,
+						<1 RK_PD5 2 &pcfg_pull_default>,
+						<1 RK_PD6 2 &pcfg_pull_default>,
+						<1 RK_PD7 2 &pcfg_pull_default>;
+			};
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
+						<2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
+						<2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
+						<2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
+						<2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
+						<2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
+						<2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
+						<2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
+						<1 RK_PA1 1 &pcfg_pull_default>,
+						<1 RK_PA2 1 &pcfg_pull_default>,
+						<1 RK_PA3 1 &pcfg_pull_default>,
+						<1 RK_PA4 1 &pcfg_pull_default>,
+						<1 RK_PA5 1 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmi_ctl: hdmi-ctl {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+						<1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB2 1 &pcfg_pull_none>,
+						<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
+						<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
+						<2 RK_PC7 1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		spi-pins {
+			spi_txd:spi-txd {
+				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
+			};
+
+			spi_rxd:spi-rxd {
+				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
+			};
+
+			spi_clk:spi-clk {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
+			};
+
+			spi_cs0:spi-cs0 {
+				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
+
+			};
+
+			spi_cs1:spi-cs1 {
+				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
+
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
new file mode 100644
index 000000000..eba7a1344
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
+	vcc_sd0: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+		volume-down {
+			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "GPIO Key Vol-";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+		};
+		/* VOL+ comes somehow thru the ADC */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_tp: regulator@11 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&mmc0 { /* sdmmc */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&mmc1 { /* wifi */
+	status = "okay";
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+	bus-width = <4>;
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
new file mode 100644
index 000000000..6b121658d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "MarsBoard RK3066";
+	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc1-supply = <&vsys>;
+		vcc2-supply = <&vsys>;
+		vcc3-supply = <&vsys>;
+		vcc4-supply = <&vsys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+		vcc7-supply = <&vsys>;
+		vccio-supply = <&vsys>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_rmii: regulator@11 {
+				regulator-name = "vcc_rmii";
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&emac {
+	status = "okay";
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+};
+
+&pinctrl {
+	lan8720a {
+		phy_int: phy-int {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
new file mode 100644
index 000000000..eed9e60cf
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rikomagic MK808";
+	compatible = "rikomagic,mk808", "rockchip,rk3066a";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			label = "mk808:blue:power";
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi_con {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&host_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_drv>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wifi: sdio-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_pwr>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in_vop1 {
+	status = "disabled";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_drv: host-drv {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb-otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vop0 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
new file mode 100644
index 000000000..309518403
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rayeager PX2";
+	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
+	vcc_stdby: 5v-stdby-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_stdby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_emmc: emmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "emmc_vccq";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vsys>;
+	};
+
+	vcc_sata: sata-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sata_pwr>;
+		regulator-name = "usb_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_drv>;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+	vmmc-supply = <&vcc_emmc>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ak8963: ak8963@d {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&comp_int>;
+	};
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pwr_hold>;
+
+		vcc1-supply = <&vsys>;
+		vcc2-supply = <&vsys>;
+		vcc3-supply = <&vsys>;
+		vcc4-supply = <&vsys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+		vcc7-supply = <&vsys>;
+		vccio-supply = <&vsys>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18: regulator@5 {
+				regulator-name = "vcc18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: regulator@8 {
+				regulator-name = "vccio_wl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_rmii: regulator@11 {
+				regulator-name = "vcc_rmii";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
+	vmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	ak8963 {
+		comp_int: comp-int {
+			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	mma8452 {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	mmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb_host {
+		host_drv: host-drv {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		sata_pwr: sata-pwr {
+			rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		sata_reset: sata-reset {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	tps {
+		pmic_int: pmic-int {
+			rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		pwr_hold: pwr-hold {
+			rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_25>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
+	status = "okay";
+};
+
+&usb_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hub_rst>, <&sata_reset>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
new file mode 100644
index 000000000..bbc3bff50
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3066a-cru.h>
+#include <dt-bindings/power/rk3066-power.h>
+#include "rk3xxx.dtsi"
+
+/ {
+	compatible = "rockchip,rk3066a";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1416000 1300000
+				1200000 1175000
+				1008000 1125000
+				816000  1125000
+				600000  1100000
+				504000  1100000
+				312000  1075000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x10000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x0 0x50>;
+		};
+	};
+
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010c000 0x19c>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>,
+			 <&cru DCLK_LCDC0>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>,
+			 <&cru SRST_LCDC0_AHB>,
+			 <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop0_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop0>;
+			};
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3066-vop";
+		reg = <0x1010e000 0x19c>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>,
+			 <&cru DCLK_LCDC1>,
+			 <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3066_PD_VIO>;
+		resets = <&cru SRST_LCDC1_AXI>,
+			 <&cru SRST_LCDC1_AHB>,
+			 <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop1_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop1>;
+			};
+		};
+	};
+
+	hdmi: hdmi@10116000 {
+		compatible = "rockchip,rk3066-hdmi";
+		reg = <0x10116000 0x2000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HDMI>;
+		clock-names = "hclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+		power-domains = <&power RK3066_PD_VIO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in_vop0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop0_out_hdmi>;
+				};
+
+				hdmi_in_vop1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vop1_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	i2s0: i2s@10118000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x10118000 0x2000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@1011a000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@1011c000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011c000 0x2000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3066a-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
+				  <&cru ACLK_CPU>, <&cru HCLK_CPU>,
+				  <&cru PCLK_CPU>, <&cru ACLK_PERI>,
+				  <&cru HCLK_PERI>, <&cru PCLK_PERI>;
+		assigned-clock-rates = <400000000>, <594000000>,
+				       <300000000>, <150000000>,
+				       <75000000>, <300000000>,
+				       <150000000>, <75000000>;
+	};
+
+	timer@2000e000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x2000e000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
+		clock-names = "timer", "pclk";
+	};
+
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rk3066a-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	timer@20038000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x20038000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
+		clock-names = "timer", "pclk";
+	};
+
+	timer@2003a000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x2003a000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
+		clock-names = "timer", "pclk";
+	};
+
+	tsadc: tsadc@20060000 {
+		compatible = "rockchip,rk3066-tsadc";
+		reg = <0x20060000 0x100>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "saradc", "apb_pclk";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@17c {
+			#phy-cells = <0>;
+			reg = <0x17c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+
+		usbphy1: usb-phy@188 {
+			#phy-cells = <0>;
+			reg = <0x188>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3066a-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20034000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20034000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@2003c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@2003e000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003e000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@2000a000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2000a000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg_pull_none {
+			bias-disable;
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <1 RK_PC0 2 &pcfg_pull_none>, /* mac_clk */
+						<1 RK_PC1 2 &pcfg_pull_none>, /* tx_en */
+						<1 RK_PC2 2 &pcfg_pull_none>, /* txd1 */
+						<1 RK_PC3 2 &pcfg_pull_none>, /* txd0 */
+						<1 RK_PC4 2 &pcfg_pull_none>, /* rx_err */
+						<1 RK_PC5 2 &pcfg_pull_none>, /* crs_dvalid */
+						<1 RK_PC6 2 &pcfg_pull_none>, /* rxd1 */
+						<1 RK_PC7 2 &pcfg_pull_none>; /* rxd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>, /* mac_md */
+						<1 RK_PD1 2 &pcfg_pull_none>; /* mac_mdclk */
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 RK_PD7 2 &pcfg_pull_default>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>;
+			};
+
+			emmc_rst: emmc-rst {
+				rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>;
+			};
+
+			/*
+			 * The data pins are shared between nandc and emmc and
+			 * not accessible through pinctrl. Also they should've
+			 * been already set correctly by firmware, as
+			 * flash/emmc is the boot-device.
+			 */
+		};
+
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+			};
+
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+						<0 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_none>,
+						<2 RK_PD5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD6 1 &pcfg_pull_none>,
+						<2 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none>,
+						<3 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <3 RK_PA2 2 &pcfg_pull_none>,
+						<3 RK_PA3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>,
+						<3 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_out: pwm0-out {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_out: pwm1-out {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_out: pwm2-out {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_out: pwm3-out {
+				rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PA5 2 &pcfg_pull_default>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PA4 2 &pcfg_pull_default>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PA7 2 &pcfg_pull_default>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PA6 2 &pcfg_pull_default>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <2 RK_PC3 2 &pcfg_pull_default>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <2 RK_PC4 2 &pcfg_pull_default>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <2 RK_PC6 2 &pcfg_pull_default>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <2 RK_PC5 2 &pcfg_pull_default>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <2 RK_PC7 2 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
+						<1 RK_PA1 1 &pcfg_pull_default>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <1 RK_PA2 1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <1 RK_PA3 1 &pcfg_pull_default>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PA4 1 &pcfg_pull_default>,
+						<1 RK_PA5 1 &pcfg_pull_default>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_default>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+						<1 RK_PB1 1 &pcfg_pull_default>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_default>,
+						<3 RK_PD4 1 &pcfg_pull_default>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <3 RK_PD5 1 &pcfg_pull_default>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <3 RK_PD6 1 &pcfg_pull_default>;
+			};
+		};
+
+		sd0 {
+			sd0_clk: sd0-clk {
+				rockchip,pins = <3 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			sd0_cmd: sd0-cmd {
+				rockchip,pins = <3 RK_PB1 1 &pcfg_pull_default>;
+			};
+
+			sd0_cd: sd0-cd {
+				rockchip,pins = <3 RK_PB6 1 &pcfg_pull_default>;
+			};
+
+			sd0_wp: sd0-wp {
+				rockchip,pins = <3 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sd0_bus1: sd0-bus-width1 {
+				rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>;
+			};
+
+			sd0_bus4: sd0-bus-width4 {
+				rockchip,pins = <3 RK_PB2 1 &pcfg_pull_default>,
+						<3 RK_PB3 1 &pcfg_pull_default>,
+						<3 RK_PB4 1 &pcfg_pull_default>,
+						<3 RK_PB5 1 &pcfg_pull_default>;
+			};
+		};
+
+		sd1 {
+			sd1_clk: sd1-clk {
+				rockchip,pins = <3 RK_PC5 1 &pcfg_pull_default>;
+			};
+
+			sd1_cmd: sd1-cmd {
+				rockchip,pins = <3 RK_PC0 1 &pcfg_pull_default>;
+			};
+
+			sd1_cd: sd1-cd {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_default>;
+			};
+
+			sd1_wp: sd1-wp {
+				rockchip,pins = <3 RK_PC7 1 &pcfg_pull_default>;
+			};
+
+			sd1_bus1: sd1-bus-width1 {
+				rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>;
+			};
+
+			sd1_bus4: sd1-bus-width4 {
+				rockchip,pins = <3 RK_PC1 1 &pcfg_pull_default>,
+						<3 RK_PC2 1 &pcfg_pull_default>,
+						<3 RK_PC3 1 &pcfg_pull_default>,
+						<3 RK_PC4 1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <0 RK_PA7 1 &pcfg_pull_default>,
+						<0 RK_PB0 1 &pcfg_pull_default>,
+						<0 RK_PB1 1 &pcfg_pull_default>,
+						<0 RK_PB2 1 &pcfg_pull_default>,
+						<0 RK_PB3 1 &pcfg_pull_default>,
+						<0 RK_PB4 1 &pcfg_pull_default>,
+						<0 RK_PB5 1 &pcfg_pull_default>,
+						<0 RK_PB6 1 &pcfg_pull_default>,
+						<0 RK_PB7 1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
+						<0 RK_PC1 1 &pcfg_pull_default>,
+						<0 RK_PC2 1 &pcfg_pull_default>,
+						<0 RK_PC3 1 &pcfg_pull_default>,
+						<0 RK_PC4 1 &pcfg_pull_default>,
+						<0 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s2 {
+			i2s2_bus: i2s2-bus {
+				rockchip,pins = <0 RK_PD0 1 &pcfg_pull_default>,
+						<0 RK_PD1 1 &pcfg_pull_default>,
+						<0 RK_PD2 1 &pcfg_pull_default>,
+						<0 RK_PD3 1 &pcfg_pull_default>,
+						<0 RK_PD4 1 &pcfg_pull_default>,
+						<0 RK_PD5 1 &pcfg_pull_default>;
+			};
+		};
+	};
+};
+
+&gpu {
+	compatible = "rockchip,rk3066-mali", "arm,mali-400";
+	interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3";
+	power-domains = <&power RK3066_PD_GPU>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer>;
+};
+
+&mmc0 {
+	clock-frequency = <50000000>;
+	dmas = <&dmac2 1>;
+	dma-names = "rx-tx";
+	max-frequency = <50000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+};
+
+&mmc1 {
+	dmas = <&dmac2 3>;
+	dma-names = "rx-tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+};
+
+&emmc {
+	dmas = <&dmac2 4>;
+	dma-names = "rx-tx";
+};
+
+&pmu {
+	power: power-controller {
+		compatible = "rockchip,rk3066-power-controller";
+		#power-domain-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power-domain@RK3066_PD_VIO {
+			reg = <RK3066_PD_VIO>;
+			clocks = <&cru ACLK_LCDC0>,
+				 <&cru ACLK_LCDC1>,
+				 <&cru DCLK_LCDC0>,
+				 <&cru DCLK_LCDC1>,
+				 <&cru HCLK_LCDC0>,
+				 <&cru HCLK_LCDC1>,
+				 <&cru SCLK_CIF1>,
+				 <&cru ACLK_CIF1>,
+				 <&cru HCLK_CIF1>,
+				 <&cru SCLK_CIF0>,
+				 <&cru ACLK_CIF0>,
+				 <&cru HCLK_CIF0>,
+				 <&cru HCLK_HDMI>,
+				 <&cru ACLK_IPP>,
+				 <&cru HCLK_IPP>,
+				 <&cru ACLK_RGA>,
+				 <&cru HCLK_RGA>;
+			pm_qos = <&qos_lcdc0>,
+				 <&qos_lcdc1>,
+				 <&qos_cif0>,
+				 <&qos_cif1>,
+				 <&qos_ipp>,
+				 <&qos_rga>;
+		};
+
+		power-domain@RK3066_PD_VIDEO {
+			reg = <RK3066_PD_VIDEO>;
+			clocks = <&cru ACLK_VDPU>,
+				 <&cru ACLK_VEPU>,
+				 <&cru HCLK_VDPU>,
+				 <&cru HCLK_VEPU>;
+			pm_qos = <&qos_vpu>;
+		};
+
+		power-domain@RK3066_PD_GPU {
+			reg = <RK3066_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+			pm_qos = <&qos_gpu>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_out>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
+&uart0 {
+	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
+	dmas = <&dmac1_s 0>, <&dmac1_s 1>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
+	dmas = <&dmac1_s 2>, <&dmac1_s 3>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
+	dmas = <&dmac2 6>, <&dmac2 7>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+	compatible = "rockchip,rk3066-uart", "snps,dw-apb-uart";
+	dmas = <&dmac2 8>, <&dmac2 9>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>;
+};
+
+&wdt {
+	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
+};
+
+&emac {
+	compatible = "rockchip,rk3066-emac";
+};
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
new file mode 100644
index 000000000..66a0ff196
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -0,0 +1,732 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 MundoReader S.L.
+ * Author:  Heiko Stuebner <heiko.stuebner@bq.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "BQ Edison2 Quad-Core";
+	compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vsys>;
+		pwms = <&pwm1 0 25000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key &usb_int>;
+
+		power {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		wake_on_usb: wake-on-usb {
+			label = "Wake-on-USB";
+			gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_hold>;
+		/* only drive the pin low until device is off */
+		active-delay-ms = <3000>;
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_in_vop0: endpoint {
+					remote-endpoint = <&vop0_out_lvds>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "innolux,ee101ia-01d", "panel-lvds";
+		backlight = <&backlight>;
+
+		/* pin LCD_CS, Nshtdn input of lvds-encoder */
+		enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_cs>;
+		power-supply = <&vcc_lcd>;
+
+		data-mapping = "vesa-24";
+		height-mm = <163>;
+		width-mm = <261>;
+
+		panel-timing {
+			clock-frequency = <72000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hback-porch = <160>;
+			hfront-porch = <16>;
+			hsync-len = <10>;
+			vback-porch = <23>;
+			vfront-porch = <12>;
+			vsync-len = <3>;
+		};
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+		reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+
+	avdd_cif: cif-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd-cif";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_avdd_en>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc28_cif>;
+	};
+
+	vcc_5v: vcc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&v5_drv>;
+		vin-supply = <&vsys>;
+	};
+
+	vcc_lcd: lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-lcd";
+		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_drv>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccq_emmc: emmc-vccq-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccq-emmc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	/* supplied from the bq24196 */
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			  <&cru ACLK_CPU>,
+			  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+			  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+			  <&cru PCLK_PERI>;
+	assigned-clock-rates = <594000000>, <504000000>,
+			       <300000000>,
+			       <150000000>, <75000000>,
+			       <300000000>, <150000000>,
+			       <75000000>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccq_emmc>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lis3de: accelerometer@29 {
+		compatible = "st,lis3de";
+		reg = <0x29>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+		rotation-matrix = "1", "0", "0",
+				  "0", "-1", "0",
+				  "0", "0", "1";
+		vdd-supply = <&vcc_io>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tmp108@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tmp_alrt>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	bat: battery@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196>;
+	};
+
+	act8846: pmic@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvs0_ctl &pmic_int>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: vcc_hdmi: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_12: REG6 {
+				regulator-name = "VDD_12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc18_cif: REG7 {
+				regulator-name = "VCC18_CIF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_tp: REG9 {
+				regulator-name = "VCC_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28_cif: REG12 {
+				regulator-name = "VCC28_CIF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	bq24196: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&charger_int &chg_ctl &otg_en>;
+		ti,system-minimum-microvolt = <3200000>;
+		monitored-battery = <&bat>;
+		omit-battery-class;
+
+		usb_otg_vbus: usb-otg-vbus { };
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ft5606: touchscreen@3e {
+		compatible = "edt,edt-ft5506";
+		reg = <0x3e>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int &tp_rst>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+		touchscreen-inverted-y;
+		/* hw ts resolution does not match display */
+		touchscreen-size-y = <1024>;
+		touchscreen-size-x = <768>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rt5616: codec@1b {
+		compatible = "realtek,rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
+	vqmmc-supply = <&vccio_wl>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		dvs0_ctl: dvs0-ctl {
+			rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	bq24196 {
+		charger_int: charger-int {
+			rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/* pin hog to make it select usb profile */
+		chg_ctl: chg-ctl {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		/* low: charging, high: complete, fault: blinking */
+		chg_det: chg-det {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* charging enabled when pin low and register set */
+		chg_en: chg-en {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		/* bq29196 powergood (when low) signal */
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* wire bq24196 otg pin to high, to enable 500mA charging */
+		otg_en: otg-en {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	camera {
+		cif0_pdn: cif0-pdn {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif1_pdn: cif1-pdn {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_avdd_en: cif-avdd-en {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	display {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_en: lcd-en {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ft5606 {
+		tp_int: tp-int {
+			rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		tp_rst: tp-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		hdmi_int: hdmi-int {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		hdmi_rst: hdmi-rst {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lis3de {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tmp108 {
+		tmp_alrt: tmp-alrt {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		v5_drv: v5-drv {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_drv: otg-drv {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_int: usb-int {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk903 {
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* pin hog to pull the reset high */
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+		device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop0 {
+	status = "okay";
+};
+
+&vop0_out {
+	vop0_out_lvds: endpoint {
+		remote-endpoint = <&lvds_in_vop0>;
+	};
+};
+
+&vop1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync
+		     &lcdc1_vsync &lcdc1_rgb24>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
new file mode 100644
index 000000000..c32e1d441
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Rockchip PX3-EVB";
+	compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@60000000 {
+		reg = <0x60000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_cif: LDO_REG1 {
+				 regulator-min-microvolt = <3300000>;
+				 regulator-max-microvolt = <3300000>;
+				 regulator-name = "vcc_cif";
+			};
+
+			vcc_jetta33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_jetta33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			lvds_12: LDO_REG4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "lvds_12";
+			};
+
+			lvds_25: LDO_REG5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "lvds_25";
+			};
+
+			cif_18: LDO_REG6 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "cif_18";
+			};
+
+			vcc_sd: LDO_REG7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			wl_18: LDO_REG8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "wl_18";
+			};
+
+			lcd_33: SWITCH_REG1 {
+				regulator-name = "lcd_33";
+			};
+		};
+	};
+
+};
+
+&i2c2 {
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
new file mode 100644
index 000000000..39b913f8d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			label = "rock:green:user1";
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue_led: led-1 {
+			label = "rock:blue:user2";
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		sleep_led: led-2 {
+			label = "rock:red:power";
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&emac {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+		system-power-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&act8846_dvs0_ctl>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi: REG6 {
+				regulator-name = "VDD_HDMI";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vcc18: REG7 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_rmii: REG9 {
+				regulator-name = "VCC_RMII";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC18_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28: REG12 {
+				regulator-name = "VCC_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		act8846_dvs0_ctl: act8846-dvs0-ctl {
+			rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
new file mode 100644
index 000000000..ddf23748e
--- /dev/null
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3188-cru.h>
+#include <dt-bindings/power/rk3188-power.h>
+#include "rk3xxx.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			resets = <&cru SRST_CORE0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			resets = <&cru SRST_CORE1>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			resets = <&cru SRST_CORE2>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <875000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+			opp-suspend;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1350000>;
+		};
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop0_out>, <&vop1_out>;
+	};
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x8000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x0 0x50>;
+		};
+	};
+
+	vop0: vop@1010c000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010c000 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3188_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop0_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	vop1: vop@1010e000 {
+		compatible = "rockchip,rk3188-vop";
+		reg = <0x1010e000 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3188_PD_VIO>;
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vop1_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	timer3: timer@2000e000 {
+		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
+		reg = <0x2000e000 0x20>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer6: timer@200380a0 {
+		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
+		reg = <0x200380a0 0x20>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
+	};
+
+	i2s0: i2s@1011a000 {
+		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: sound@1011e000 {
+		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+		reg = <0x1011e000 0x2000>;
+		#sound-dai-cells = <0>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac1_s 8>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rk3188-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@10c {
+			#phy-cells = <0>;
+			reg = <0x10c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+
+		usbphy1: usb-phy@11c {
+			#phy-cells = <0>;
+			reg = <0x11c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3188-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2000a000 {
+			compatible = "rockchip,rk3188-gpio-bank0";
+			reg = <0x2000a000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@2003c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@2003e000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003e000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg_pull_up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg_pull_down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg_pull_none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <0 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			emmc_rst: emmc-rst {
+				rockchip,pins = <0 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			/*
+			 * The data pins are shared between nandc and emmc and
+			 * not accessible through pinctrl. Also they should've
+			 * been already set correctly by firmware, as
+			 * flash/emmc is the boot-device.
+			 */
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>, /* tx_en */
+						<3 RK_PC1 2 &pcfg_pull_none>, /* txd1 */
+						<3 RK_PC2 2 &pcfg_pull_none>, /* txd0 */
+						<3 RK_PC3 2 &pcfg_pull_none>, /* rxd0 */
+						<3 RK_PC4 2 &pcfg_pull_none>, /* rxd1 */
+						<3 RK_PC5 2 &pcfg_pull_none>, /* mac_clk */
+						<3 RK_PC6 2 &pcfg_pull_none>, /* rx_err */
+						<3 RK_PC7 2 &pcfg_pull_none>; /* crs_dvalid */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+						<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+						<1 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>,
+						<1 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>,
+						<1 RK_PD5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <3 RK_PB6 2 &pcfg_pull_none>,
+						<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <1 RK_PD6 1 &pcfg_pull_none>,
+						<1 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc1 {
+			lcdc1_dclk: lcdc1-dclk {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			lcdc1_den: lcdc1-den {
+				rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			lcdc1_hsync: lcdc1-hsync {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			lcdc1_vsync: lcdc1-vsync {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
+			};
+
+			lcdc1_rgb24: lcdc1-rgb24 {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+						<2 RK_PA1 1 &pcfg_pull_none>,
+						<2 RK_PA2 1 &pcfg_pull_none>,
+						<2 RK_PA3 1 &pcfg_pull_none>,
+						<2 RK_PA4 1 &pcfg_pull_none>,
+						<2 RK_PA5 1 &pcfg_pull_none>,
+						<2 RK_PA6 1 &pcfg_pull_none>,
+						<2 RK_PA7 1 &pcfg_pull_none>,
+						<2 RK_PB0 1 &pcfg_pull_none>,
+						<2 RK_PB1 1 &pcfg_pull_none>,
+						<2 RK_PB2 1 &pcfg_pull_none>,
+						<2 RK_PB3 1 &pcfg_pull_none>,
+						<2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>,
+						<2 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_out: pwm0-out {
+				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_out: pwm1-out {
+				rockchip,pins = <3 RK_PD4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_out: pwm2-out {
+				rockchip,pins = <3 RK_PD5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_out: pwm3-out {
+				rockchip,pins = <3 RK_PD6 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PA6 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PA5 2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PA4 2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <0 RK_PD7 1 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <0 RK_PD5 1 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up>,
+						<1 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <1 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <1 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up>,
+						<1 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_up>,
+						<1 RK_PB1 1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_up>,
+						<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <1 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		sd0 {
+			sd0_clk: sd0-clk {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			sd0_cmd: sd0-cmd {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			sd0_cd: sd0-cd {
+				rockchip,pins = <3 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			sd0_wp: sd0-wp {
+				rockchip,pins = <3 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			sd0_pwr: sd0-pwr {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			sd0_bus1: sd0-bus-width1 {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			sd0_bus4: sd0-bus-width4 {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>,
+						<3 RK_PA5 1 &pcfg_pull_none>,
+						<3 RK_PA6 1 &pcfg_pull_none>,
+						<3 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		sd1 {
+			sd1_clk: sd1-clk {
+				rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			sd1_cmd: sd1-cmd {
+				rockchip,pins = <3 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sd1_cd: sd1-cd {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			sd1_wp: sd1-wp {
+				rockchip,pins = <3 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			sd1_bus1: sd1-bus-width1 {
+				rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			sd1_bus4: sd1-bus-width4 {
+				rockchip,pins = <3 RK_PC1 1 &pcfg_pull_none>,
+						<3 RK_PC2 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+						<1 RK_PC1 1 &pcfg_pull_none>,
+						<1 RK_PC2 1 &pcfg_pull_none>,
+						<1 RK_PC3 1 &pcfg_pull_none>,
+						<1 RK_PC4 1 &pcfg_pull_none>,
+						<1 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
+
+&emac {
+	compatible = "rockchip,rk3188-emac";
+};
+
+&global_timer {
+	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+};
+
+&local_timer {
+	interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+};
+
+&gpu {
+	compatible = "rockchip,rk3188-mali", "arm,mali-400";
+	interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3";
+	power-domains = <&power RK3188_PD_GPU>;
+};
+
+&i2c0 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer>;
+};
+
+&pmu {
+	power: power-controller {
+		compatible = "rockchip,rk3188-power-controller";
+		#power-domain-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power-domain@RK3188_PD_VIO {
+			reg = <RK3188_PD_VIO>;
+			clocks = <&cru ACLK_LCDC0>,
+				 <&cru ACLK_LCDC1>,
+				 <&cru DCLK_LCDC0>,
+				 <&cru DCLK_LCDC1>,
+				 <&cru HCLK_LCDC0>,
+				 <&cru HCLK_LCDC1>,
+				 <&cru SCLK_CIF0>,
+				 <&cru ACLK_CIF0>,
+				 <&cru HCLK_CIF0>,
+				 <&cru ACLK_IPP>,
+				 <&cru HCLK_IPP>,
+				 <&cru ACLK_RGA>,
+				 <&cru HCLK_RGA>;
+			pm_qos = <&qos_lcdc0>,
+				 <&qos_lcdc1>,
+				 <&qos_cif0>,
+				 <&qos_ipp>,
+				 <&qos_rga>;
+		};
+
+		power-domain@RK3188_PD_VIDEO {
+			reg = <RK3188_PD_VIDEO>;
+			clocks = <&cru ACLK_VDPU>,
+				 <&cru ACLK_VEPU>,
+				 <&cru HCLK_VDPU>,
+				 <&cru HCLK_VEPU>;
+			pm_qos = <&qos_vpu>;
+		};
+
+		power-domain@RK3188_PD_GPU {
+			reg = <RK3188_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+			pm_qos = <&qos_gpu>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_out>;
+};
+
+&spi0 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
+&uart0 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+	compatible = "rockchip,rk3188-uart", "snps,dw-apb-uart";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>;
+};
+
+&wdt {
+	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
+};
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
new file mode 100644
index 000000000..aed879db6
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+	model = "Rockchip RK3228 Evaluation board";
+	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	clock_in_out = "output";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rmii";
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clocks = <&cru SCLK_MAC_PHY>;
+			resets = <&cru SRST_MACPHY>;
+			phy-is-integrated;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
new file mode 100644
index 000000000..350497a3c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "rk3229.dtsi"
+
+/ {
+	model = "Rockchip RK3229 Evaluation board";
+	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vccio_1v8>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power_key: power-key {
+			label = "GPIO Key Power";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	non-removable;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio4-supply = <&vccio_3v3>;
+};
+
+&pinctrl {
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_ehci {
+	status = "okay";
+};
+
+&usb_host2_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
new file mode 100644
index 000000000..263393ac4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "rk3229.dtsi"
+
+/ {
+	model = "Mecer Xtreme Mini S6";
+	compatible = "mecer,xms6", "rockchip,rk3229";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	ext_gmac: ext_gmac {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	power-led {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		              <&gpio2 29 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vccio_1v8>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	non-removable;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC_SRC>;
+	assigned-clock-rates = <50000000>;
+	clock_in_out = "output";
+	phy-handle = <&phy>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_phy>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id1234.d400",
+			             "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clocks = <&cru SCLK_MAC_PHY>;
+			phy-is-integrated;
+			resets = <&cru SRST_MACPHY>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&iep_mmu {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio4-supply = <&vccio_3v3>;
+};
+
+&pinctrl {
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	vqmmc-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	disable-wp;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart21_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_ehci {
+	status = "okay";
+};
+
+&usb_host2_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi
new file mode 100644
index 000000000..cb7d3fad8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3229.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "rk322x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3229";
+
+	/delete-node/ opp-table0;
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1275000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1325000>;
+		};
+		opp-1392000000 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-microvolt = <1375000>;
+		};
+		opp-1464000000 {
+			opp-hz = /bits/ 64 <1464000000>;
+			opp-microvolt = <1400000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
new file mode 100644
index 000000000..2f17bf35d
--- /dev/null
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -0,0 +1,1170 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi0 = &spi0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			enable-method = "psci";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1275000>;
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@110f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x110f0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	i2s1: i2s1@100b0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100b0000 0x4000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		dmas = <&pdma 14>, <&pdma 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s0: i2s0@100c0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100c0000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		dmas = <&pdma 11>, <&pdma 12>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	spdif: spdif@100d0000 {
+		compatible = "rockchip,rk3228-spdif";
+		reg = <0x100d0000 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&pdma 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	i2s2: i2s2@100e0000 {
+		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+		reg = <0x100e0000 0x4000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	grf: syscon@11000000 {
+		compatible = "rockchip,rk3228-grf", "syscon", "simple-mfd";
+		reg = <0x11000000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3228-io-voltage-domain";
+			status = "disabled";
+		};
+
+		u2phy0: usb2-phy@760 {
+			compatible = "rockchip,rk3228-usb2phy";
+			reg = <0x0760 0x0c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy0";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy0_otg: otg-port {
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy0_host: host-port {
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@800 {
+			compatible = "rockchip,rk3228-usb2phy";
+			reg = <0x0800 0x0c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy1";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy1_otg: otg-port {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy1_host: host-port {
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	uart0: serial@11010000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11010000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@11020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11020000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@11030000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11030000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	efuse: efuse@11040000 {
+		compatible = "rockchip,rk3228-efuse";
+		reg = <0x11040000 0x20>;
+		clocks = <&cru PCLK_EFUSE_256>;
+		clock-names = "pclk_efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		efuse_id: id@7 {
+			reg = <0x7 0x10>;
+		};
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	i2c0: i2c@11050000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11050000 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11060000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11060000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11070000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11070000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11080000 {
+		compatible = "rockchip,rk3228-i2c";
+		reg = <0x11080000 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@11090000 {
+		compatible = "rockchip,rk3228-spi";
+		reg = <0x11090000 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@110a0000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x110a0000 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_CPU>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@110b0000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@110b0010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@110b0020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@110b0030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	timer: timer@110c0000 {
+		compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
+		reg = <0x110c0000 0x20>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	cru: clock-controller@110e0000 {
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x110e0000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru ARMCLK>,
+			<&cru PLL_CPLL>, <&cru ACLK_PERI>,
+			<&cru HCLK_PERI>, <&cru PCLK_PERI>,
+			<&cru ACLK_CPU>, <&cru HCLK_CPU>,
+			<&cru PCLK_CPU>;
+		assigned-clock-rates =
+			<594000000>, <816000000>,
+			<500000000>, <150000000>,
+			<150000000>, <75000000>,
+			<150000000>, <150000000>,
+			<75000000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>,
+						<&cpu1 THERMAL_NO_LIMIT 6>,
+						<&cpu2 THERMAL_NO_LIMIT 6>,
+						<&cpu3 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@11150000 {
+		compatible = "rockchip,rk3228-tsadc";
+		reg = <0x11150000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <32768>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	hdmi_phy: hdmi-phy@12030000 {
+		compatible = "rockchip,rk3228-hdmi-phy";
+		reg = <0x12030000 0x10000>;
+		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		#clock-cells = <0>;
+		clock-output-names = "hdmiphy_phy";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	gpu: gpu@20000000 {
+		compatible = "rockchip,rk3228-mali", "arm,mali-400";
+		reg = <0x20000000 0x10000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU_A>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@20020800 {
+		compatible = "rockchip,iommu";
+		reg = <0x20020800 0x100>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vdec_mmu: iommu@20030480 {
+		compatible = "rockchip,iommu";
+		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vop: vop@20050000 {
+		compatible = "rockchip,rk3228-vop";
+		reg = <0x20050000 0x1ffc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@20053f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x20053f00 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	rga: rga@20060000 {
+		compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga";
+		reg = <0x20060000 0x1000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
+		reset-names = "core", "axi", "ahb";
+	};
+
+	iep_mmu: iommu@20070800 {
+		compatible = "rockchip,iommu";
+		reg = <0x20070800 0x100>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@200a0000 {
+		compatible = "rockchip,rk3228-dw-hdmi";
+		reg = <0x200a0000 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_HDMI_PHY>;
+		assigned-clock-parents = <&hdmi_phy>;
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		resets = <&cru SRST_HDMI_P>;
+		reset-names = "hdmi";
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vop: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	sdmmc: mmc@30000000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30000000 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	sdio: mmc@30010000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30010000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+		status = "disabled";
+	};
+
+	emmc: mmc@30020000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30020000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <37500000>;
+		max-frequency = <37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <8>;
+		rockchip,default-sample-phase = <158>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	usb_otg: usb@30040000 {
+		compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x30040000 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy0_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@30080000 {
+		compatible = "generic-ehci";
+		reg = <0x30080000 0x20000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@300a0000 {
+		compatible = "generic-ohci";
+		reg = <0x300a0000 0x20000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@300c0000 {
+		compatible = "generic-ehci";
+		reg = <0x300c0000 0x20000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
+		phys = <&u2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@300e0000 {
+		compatible = "generic-ohci";
+		reg = <0x300e0000 0x20000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST1>, <&u2phy1>;
+		phys = <&u2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host2_ehci: usb@30100000 {
+		compatible = "generic-ehci";
+		reg = <0x30100000 0x20000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host2_ohci: usb@30120000 {
+		compatible = "generic-ohci";
+		reg = <0x30120000 0x20000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST2>, <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
+		compatible = "rockchip,rk3228-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
+			<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			<&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			"mac_clk_tx", "clk_mac_ref",
+			"clk_mac_refout", "aclk_mac",
+			"pclk_mac";
+		resets = <&cru SRST_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x2000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3228-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@11110000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11110000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@11120000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11120000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@11130000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11130000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@11140000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11140000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC4 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC5 1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA3 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA4 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA5 1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>,
+						<1 RK_PD1 2 &pcfg_pull_none>,
+						<1 RK_PD2 2 &pcfg_pull_none>,
+						<1 RK_PD3 2 &pcfg_pull_none>,
+						<1 RK_PD4 2 &pcfg_pull_none>,
+						<1 RK_PD5 2 &pcfg_pull_none>,
+						<1 RK_PD6 2 &pcfg_pull_none>,
+						<1 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC6 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC7 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB1 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB5 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC5 2 &pcfg_pull_none>,
+						<2 RK_PC4 2 &pcfg_pull_none>,
+						<2 RK_PB3 1 &pcfg_pull_none>,
+						<2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PB5 1 &pcfg_pull_none_drv_12ma>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PB0 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			phy_pins: phy-pins {
+				rockchip,pins = <2 RK_PB6 2 &pcfg_pull_none>,
+						<2 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>;
+			};
+
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <0 RK_PB6 2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <2 RK_PA2 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <2 RK_PA1 2 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <2 RK_PA3 2 &pcfg_pull_up>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>,
+						<0 RK_PB1 1 &pcfg_pull_none>,
+						<0 RK_PB3 1 &pcfg_pull_none>,
+						<0 RK_PB4 1 &pcfg_pull_none>,
+						<0 RK_PB5 1 &pcfg_pull_none>,
+						<0 RK_PB6 1 &pcfg_pull_none>,
+						<1 RK_PA2 2 &pcfg_pull_none>,
+						<1 RK_PA4 2 &pcfg_pull_none>,
+						<1 RK_PA5 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <1 RK_PB4 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <3 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PD0 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>,
+						<2 RK_PD3 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD5 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			uart21_xfer: uart21-xfer {
+				rockchip,pins = <1 RK_PB2 2 &pcfg_pull_up>,
+						<1 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
new file mode 100644
index 000000000..8a635c243
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3288 EVB ACT8846";
+	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		regulator-name = "vcc_lcd";
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwr>;
+		regulator-name = "vcc_wl";
+		vin-supply = <&vcc_18>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
+
+&pinctrl {
+	lcd {
+		lcd_en: lcd-en  {
+			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <7 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
new file mode 100644
index 000000000..42384ea4c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3288 EVB RK808";
+	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
new file mode 100644
index 000000000..c4ca73b40
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <640000>;
+		};
+
+		esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1000000>;
+		};
+
+		home  {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	panel: panel {
+		compatible = "lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lcd_cs>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_pwr>;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
+	 * but it shouldn't hurt to toggle this pin there anyway.
+	 */
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&edp {
+	force-hpd;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&gmac {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts
new file mode 100644
index 000000000..135e88321
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3288-firefly.dtsi"
+
+/ {
+	model = "Firefly-RK3288 Beta";
+	compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
+};
+
+&ir {
+	gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
new file mode 100644
index 000000000..36efa36b7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7  {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcca_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vccio_wl>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
new file mode 100644
index 000000000..9a4a9749c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ */
+
+/dts-v1/;
+#include "rk3288-firefly-reload-core.dtsi"
+
+/ {
+	model = "Firefly-RK3288-reload";
+	compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:power";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led_pin>;
+			panic-indicator;
+		};
+
+		work_led: led-1 {
+			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_pin>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	af_28: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "af_28";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	dvdd_1v2: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_pwr>;
+		regulator-name = "dvdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vbat_wl: wifi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+	status = "okay";
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: es8328@10 {
+		compatible = "everest,es8328";
+		DVDD-supply = <&vcca_33>;
+		AVDD-supply = <&vcca_33>;
+		PVDD-supply = <&vcca_33>;
+		HPVDD-supply = <&vcca_33>;
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		clock-names = "i2s_hclk", "i2s_clk";
+		reg = <0x10>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_pwr: cif-pwr {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led_pin: power-led-pin {
+			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_pin: work-led-pin {
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts
new file mode 100644
index 000000000..313459dab
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3288-firefly.dtsi"
+
+/ {
+	model = "Firefly-RK3288";
+	compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+};
+
+&ir {
+	gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
new file mode 100644
index 000000000..c560afe3a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -0,0 +1,574 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_pin>;
+		};
+
+		power_led: led-1 {
+			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "firefly:green:power";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led_pin>;
+		};
+	};
+
+	vbat_wl: vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_5v: usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	/*
+	 * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led_pin: power-led-pin {
+			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_pin: work-led-pin {
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
new file mode 100644
index 000000000..fe265a834
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "mqmaker MiQi";
+	compatible = "mqmaker,miqi", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "miqi:green:user";
+			linux,default-trigger = "timer";
+		};
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The otg controller is the only system power source,
+	 * so needs to always stay in device mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
new file mode 100644
index 000000000..1e33859de
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree file for Phytec PCM-947 carrier board
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include "rk3288-phycore-som.dtsi"
+
+/ {
+	model = "Phytec RK3288 PCM-947";
+	compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+	user_buttons: user-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_button_pins>;
+
+		button@0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		button@1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
+	vcc_host0_5v: usb-host0-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host0_vbus_drv>;
+		regulator-name = "vcc_host0_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+
+	vcc_host1_5v: usb-host1-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_vbus_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_in_otg_out>;
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_rtc_int>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 0>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c_eeprom_cb: eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* PCA9533 - 4-bit LED dimmer */
+	leddim: leddimmer@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led1 {
+			label = "red:user1";
+			linux,default-trigger = "none";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led2 {
+			label = "green:user2";
+			linux,default-trigger = "none";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led3 {
+			label = "blue:user3";
+			linux,default-trigger = "none";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led4 {
+			label = "red:user4";
+			linux,default-trigger = "none";
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	buttons {
+		user_button_pins: user-button-pins {
+			/* button 1 */
+			rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+			/* button 2 */
+					<8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rv4162 {
+		i2c_rtc_int: i2c-rtc-int {
+			rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on pcm-947 board so bump up to 12 mA.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		ts_irq_pin: ts-irq-pin {
+			rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host0_vbus_drv: host0-vbus-drv {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		host1_vbus_drv: host1-vbus-drv {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&vdd_io_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
new file mode 100644
index 000000000..e43887c96
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree file for Phytec phyCORE-RK3288 SoM
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "Phytec RK3288 phyCORE";
+	compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rk818;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led_pin>;
+
+		user_led: led-0 {
+			label = "green_led";
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "keep";
+		};
+	};
+
+	vdd_emmc_io: vdd-emmc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_emmc_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_3v3_io>;
+	};
+
+	vdd_in_otg_out: vdd-in-otg-out {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_in_otg_out";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_misc_1v8: vdd-misc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_misc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vdd_3v3_io>;
+	vqmmc-supply = <&vdd_emmc_io>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
+	phy-handle = <&phy0>;
+	phy-supply = <&vdd_eth_2v5>;
+	phy-mode = "rgmii-id";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	tx_delay = <0x0>;
+	rx_delay = <0x0>;
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+};
+
+&io_domains {
+	status = "okay";
+	sdcard-supply = <&vdd_io_sd>;
+	flash0-supply = <&vdd_emmc_io>;
+	flash1-supply = <&vdd_misc_1v8>;
+	gpio1830-supply = <&vdd_3v3_io>;
+	gpio30-supply = <&vdd_3v3_io>;
+	bb-supply = <&vdd_3v3_io>;
+	dvp-supply = <&vdd_3v3_io>;
+	lcdc-supply = <&vdd_3v3_io>;
+	wifi-supply = <&vdd_3v3_io>;
+	audio-supply = <&vdd_3v3_io>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		boost-supply = <&vdd_in_otg_out>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_misc_1v8>;
+		vcc8-supply = <&vdd_misc_1v8>;
+		vcc9-supply = <&vdd_3v3_io>;
+		vddio-supply = <&vdd_3v3_io>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_3v3_io: DCDC_REG4 {
+				regulator-name = "vdd_3v3_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_sys: DCDC_BOOST {
+				regulator-name = "vdd_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			/* vcc9 */
+			vdd_sd: SWITCH_REG {
+				regulator-name = "vdd_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* vcc6 */
+			vdd_eth_2v5: LDO_REG2 {
+				regulator-name = "vdd_eth_2v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2500000>;
+				};
+			};
+
+			/* vcc7 */
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			/* vcc8 */
+			vdd_1v8_lcd_ldo: LDO_REG4 {
+				regulator-name = "vdd_1v8_lcd_ldo";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* vcc8 */
+			vdd_1v0_lcd: LDO_REG6 {
+				regulator-name = "vdd_1v0_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			/* vcc7 */
+			vdd_1v8_ldo: LDO_REG7 {
+				regulator-name = "vdd_1v8_ldo";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* vcc9 */
+			vdd_io_sd: LDO_REG9 {
+				regulator-name = "vdd_io_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	/* M24C32-D */
+	i2c_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	vdd_cpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1430000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vdd_sys>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_12ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_12ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA1 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA2 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA3 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA4 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA5 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA6 2 &pcfg_pull_none_12ma>,
+					<3 RK_PA7 2 &pcfg_pull_none_12ma>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	leds {
+		user_led_pin: user-led-pin {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/* Pin for switching state between sleep and non-sleep state */
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vdd_1v8_ldo>;
+};
+
+&spi2 {
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "micron,n25q128a13", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		status = "okay";
+	};
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
new file mode 100644
index 000000000..8c7376d64
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "PopMetal-RK3288";
+	compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc18_dvp: vcc18-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc18-dvp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;                     /* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lan: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			ldo5: LDO_REG5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "ldo5";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_33: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vccio_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ak8963: ak8963@d {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0d>;
+		interrupt-parent = <&gpio8>;
+		interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&comp_int>;
+		vdd-supply = <&vcc_io>;
+		vid-supply = <&vcc_io>;
+	};
+
+	l3g4200d: l3g4200d@69 {
+		compatible = "st,l3g4200d-gyro";
+		st,drdy-int-pin = <2>;
+		reg = <0x69>;
+		vdd-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+	};
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio8>;
+		interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca_33>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc18_dvp>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	ak8963 {
+		comp_int: comp-int {
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	mma8452 {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
new file mode 100644
index 000000000..55467bc30
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	model = "Netxeon R89";
+	compatible = "netxeon,r89", "rockchip,rk3288";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_otg: vcc-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdmmc: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sys-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: pmic@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_CPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: pmic@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "VDD_GPU";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+	};
+
+	act8846: pmic@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_wl: REG7 {
+				regulator-name = "VCC_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "VCC_LAN";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sdmmc>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock-pi-n8.dts b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts
new file mode 100644
index 000000000..b19593021
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3288-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N8";
+	compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
+		     "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
new file mode 100644
index 000000000..76363b8af
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory@0 {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vccio_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	rx_delay = <0x10>;
+	tx_delay = <0x30>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		system-power-controller;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: vccio_codec: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_io>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vccio_pmu>;
+	gpio30-supply = <&vccio_pmu>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
new file mode 100644
index 000000000..d5ef99ebb
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+	model = "Radxa Rock 2 Square";
+	compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		heartbeat_led: led-0 {
+			gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "rock2:green:state1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc_led: led-1 {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "rock2:blue:state2";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	sata_pwr: sata-prw-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sata_pwr_en>;
+		/* Always turn on the 5V sata power connector */
+		regulator-always-on;
+		regulator-name = "sata_pwr";
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-i2s {
+		compatible = "rockchip,rk3288-hdmi-analog";
+		pinctrl-names = "default";
+		pinctrl-0 = <&phone_ctl>, <&hp_det>;
+		rockchip,audio-codec = <&es8388>;
+		rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,model = "I2S";
+		rockchip,routing = "Analog", "LOUT2",
+				   "Analog", "ROUT2";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_usb_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;	/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	es8388: es8388@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		AVDD-supply = <&vccio_codec>;
+		DVDD-supply = <&vccio_codec>;
+		HPVDD-supply = <&vccio_codec>;
+		PVDD-supply = <&vccio_codec>;
+		clocks = <&cru SCLK_I2S0_OUT>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		phone_ctl: phone-ctl {
+			rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		sata_pwr_en: sata-pwr-en {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usbphy1 {
+	vbus-supply = <&vcc_usb_host>;
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
new file mode 100644
index 000000000..970e13859
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Asus Tinker Board S";
+	compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	max-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
new file mode 100644
index 000000000..1e43527aa
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Asus Tinker Board";
+	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
new file mode 100644
index 000000000..9c1e38c54
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/rockchip,rk808.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		act_led: led-0 {
+			gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		heartbeat_led: led-1 {
+			gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr_led: led-2 {
+			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>,
+			<&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,tinker-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&cpu_opp_table {
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc33_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+				<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc18_ldo1: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_ldo1";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_mipi: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_codec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc33_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc33_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		dvs_1: dvs-1 {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+					<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pwr_3g: pwr-3g {
+			rockchip,pins = <7 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc18_ldo1>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	broken-cd;
+	disable-wp;			/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
new file mode 100644
index 000000000..51208d161
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Veyron (and derivatives) fragment for the  max98090 audio
+ * codec and analog headphone jack.
+ *
+ * Copyright 2016 Google, Inc
+ */
+
+/ {
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_det>, <&hp_det>;
+		rockchip,model = "VEYRON-I2S";
+		rockchip,i2s-controller = <&i2s>;
+		rockchip,audio-codec = <&max98090>;
+		rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
+		rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
+		rockchip,headset-codec = <&headsetcodec>;
+		rockchip,hdmi-codec = <&hdmi>;
+	};
+};
+
+&i2c2 {
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&int_codec>;
+	};
+};
+
+&i2c4 {
+	headsetcodec: ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_int_l>;
+		ti,micbias = <7>;		/* MICBIAS = 2.8V */
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc18_codec>;
+};
+
+&rk808 {
+	vcc10-supply = <&vcc33_sys>;
+
+	regulators {
+		vcc18_codec: LDO_REG6 {
+			regulator-name = "vcc18_codec";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	codec {
+		hp_det: hp-det {
+			rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		/*
+		 * HACK: We're going to _pull down_ this _active low_ interrupt
+		 * so that it never fires.  We don't need this interrupt because
+		 * we've got a ts3a227e chip but the driver requires it.
+		 */
+		int_codec: int-codec {
+			rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		mic_det: mic-det {
+			rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headset {
+		ts3a227e_int_l: ts3a227e-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
new file mode 100644
index 000000000..aa33d0918
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Brain Rev 0 board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
+
+/ {
+	model = "Google Brain";
+	compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+		/* This is gated by vcc_18 too */
+	};
+
+	/* This turns on vbus for host2 and otg (dwc2) */
+	vcc5_host2: vcc5-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb-host {
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_hdmi: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_hdmi";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 000000000..a10d25ac8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+			    <&bt_dev_wake>;
+
+		compatible = "brcm,bcm43540-bt";
+		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed		= <3000000>;
+		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
new file mode 100644
index 000000000..05112c251
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) board device tree source
+ * Chromebook specific parts
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
+#include "rk3288-veyron-edp.dtsi"
+#include "rk3288-veyron-sdmmc.dtsi"
+
+/ {
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = &i2c_tunnel;
+	};
+
+	gpio-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ac_present_ap>;
+	};
+
+	lid_switch: lid-switch {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_lid_int_l>;
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <1>;
+		};
+	};
+
+	/* A non-regulated voltage from power supply or battery */
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vccsys>;
+	};
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vccsys>;
+	};
+
+	/* This turns on vbus for host1 (dwc2) */
+	vcc5_host1: vcc5-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host1_pwr_en>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbotg_pwren_h>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rk808 {
+	vcc11-supply = <&vcc_5v>;
+
+	regulators {
+		vcc33_ccd: LDO_REG8 {
+			regulator-name = "vcc33_ccd";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		google,cros-ec-spi-pre-delay = <30>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	buttons {
+		ap_lid_int_l: ap-lid-int-l {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	charger {
+		ac_present_ap: ac-present-ap {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	cros-ec {
+		ec_int: ec-int {
+			rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	suspend {
+		suspend_l_wake: suspend-l-wake {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		suspend_l_sleep: suspend-l-sleep {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	trackpad {
+		trackpad_int: trackpad-int {
+			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb-host {
+		host1_pwr_en: host1-pwr-en {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbotg_pwren_h: usbotg-pwren-h {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
new file mode 100644
index 000000000..32c0f1076
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the edp displays
+ *
+ * Copyright 2019 Google LLC
+ */
+
+/ {
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+		post-pwm-on-delay-ms = <10>;
+		pwm-off-delay-ms = <10>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n116bge";
+		status = "okay";
+		power-supply = <&panel_regulator>;
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <74250000>;
+			hactive = <1366>;
+			hfront-porch = <136>;
+			hback-porch = <60>;
+			hsync-len = <30>;
+			hsync-active = <0>;
+			vactive = <768>;
+			vfront-porch = <8>;
+			vback-porch = <12>;
+			vsync-len = <12>;
+			vsync-active = <0>;
+		};
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
new file mode 100644
index 000000000..309b122b4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Fievel Rev 0+ board device tree source
+ *
+ * Copyright 2016 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
+
+/ {
+	model = "Google Fievel";
+	compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7",
+		     "google,veyron-fievel-rev6", "google,veyron-fievel-rev5",
+		     "google,veyron-fievel-rev4", "google,veyron-fievel-rev3",
+		     "google,veyron-fievel-rev2", "google,veyron-fievel-rev1",
+		     "google,veyron-fievel-rev0", "google,veyron-fievel",
+		     "google,veyron", "rockchip,rk3288";
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/*
+	 * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys,
+	 * enabled by vcc_18
+	 */
+	vcc33_io: vcc33-io {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc33_io";
+	};
+
+	vcc5_host1: vcc5-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_usb1_pwr_en>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5_host2: vcc5-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_usb2_pwr_en>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwr_en>;
+		regulator-name = "vcc5_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+};
+
+&gmac {
+	status = "okay";
+
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc33_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	rx_delay = <0x10>;
+	tx_delay = <0x30>;
+
+	/*
+	 * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
+	 * with a 30ms settling time.
+	 */
+	snps,reset-gpio = <&gpio4 RK_PB0 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	wakeup-source;
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rk808 {
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	vcc6-supply = <&vcc33_sys>;
+	vcc10-supply = <&vcc33_sys>;
+	vcc11-supply = <&vcc_5v>;
+	vcc12-supply = <&vcc33_sys>;
+
+	regulators {
+		/delete-node/ LDO_REG1;
+
+		/*
+		 * According to the schematic, vcc18_lcdt is for
+		 * HDMI_AVDD_1V8
+		 */
+		vcc18_lcdt: LDO_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vdd18_lcdt";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		/*
+		 * This is not a pwren anymore, but the real power supply,
+		 * vdd10_lcd for HDMI_AVDD_1V0
+		 */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		/* for usb camera */
+		vcc33_ccd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_ccd";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc33_lan: SWITCH_REG2 {
+			regulator-name = "vcc33_lan";
+		};
+	};
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+	};
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "HUB_USB1_nFALUT",
+			  "PHY_PMEB",
+
+			  "PHY_INT",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "",
+			  "USB_OTG_POWER_EN",
+			  "AP_WARM_RESET_H",
+			  "USB_OTG_nFALUT",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "DEVMODE_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "",
+			  "TOUCH_INT",
+			  "TOUCH_RST",
+
+			  "I2C3_SCL_TP",
+			  "I2C3_SDA_TP";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "VCC5V_GOOD_H",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "PHY_TXD2",
+			  "PHY_TXD3",
+			  "MAC_RXD2",
+			  "MAC_RXD3",
+			  "PHY_TXD0",
+			  "PHY_TXD1",
+			  "MAC_RXD0",
+			  "MAC_RXD1";
+};
+
+&gpio4 {
+	gpio-line-names = "MAC_MDC",
+			  "MAC_RXDV",
+			  "MAC_RXER",
+			  "MAC_CLK",
+			  "PHY_TXEN",
+			  "MAC_MDIO",
+			  "MAC_RXCLK",
+			  "",
+
+			  "PHY_RST",
+			  "PHY_TXCLK",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS_L",
+			  "UART0_RTS_L",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "USB_OTG_CTL1",
+			  "HUB_USB2_CTL1",
+			  "HUB_USB2_PWR_EN",
+			  "HUB_USB_ILIM_SEL",
+
+			  "USB_OTG_STATUS_L",
+			  "HUB_USB1_CTL1",
+			  "HUB_USB1_PWR_EN",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "HUB_USB2_nFALUT",
+			  "USB_OTG_ILIM_SEL";
+};
+
+&gpio7 {
+	gpio-line-names = "LCD_BL_PWM",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "PWR_LED1",
+			  "TPM_INT_H",
+			  "SPK_ON",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "",
+			  "EDP_HPD",
+			  "DVS1",
+			  "",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "HDMI_CEC",
+			  "I2C4_SDA",
+			  "I2C4_SCL",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* For usb bc1.2 */
+		&usb_otg_ilim_sel
+		&usb_usb_ilim_sel
+
+		/* Wake only */
+		&bt_dev_wake_awake
+		&pwr_led1_on
+	>;
+
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* For usb bc1.2 */
+		&usb_otg_ilim_sel
+		&usb_usb_ilim_sel
+
+		/* Sleep only */
+		&bt_dev_wake_sleep
+		&pwr_led1_blink
+	>;
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		pwr_led1_on: pwr-led1-on {
+			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pwr_led1_blink: pwr-led1-blink {
+			rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb-bc12 {
+		usb_otg_ilim_sel: usb-otg-ilim-sel {
+			rockchip,pins = <6 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		usb_usb_ilim_sel: usb-usb-ilim-sel {
+			rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	usb-host {
+		hub_usb1_pwr_en: hub_usb1_pwr_en {
+			rockchip,pins = <5 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_usb2_pwr_en: hub_usb2_pwr_en {
+			rockchip,pins = <5 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg_pwr_en: usb_otg_pwr_en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
new file mode 100644
index 000000000..af77ab205
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jaq";
+	compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+		     "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+		     "google,veyron-jaq-rev1", "google,veyron-jaq",
+		     "google,veyron", "rockchip,rk3288";
+};
+
+&backlight {
+	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
+	brightness-levels = <0 8 255>;
+	num-interpolated-steps = <247>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",	/* Maybe missing from mighty? */
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "ALS_INT",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "SDMMC_WP",		/* mighty only */
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFALUT1",		/* nFAULT1 on jaq */
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
new file mode 100644
index 000000000..2c916c50d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Jerry Rev 3+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jerry";
+	compatible = "google,veyron-jerry-rev15", "google,veyron-jerry-rev14",
+		     "google,veyron-jerry-rev13", "google,veyron-jerry-rev12",
+		     "google,veyron-jerry-rev11", "google,veyron-jerry-rev10",
+		     "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mwifiex: wifi@1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+
+		marvell,caldata-txpwrlimit-2g = /bits/ 8 <
+0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x01 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x02 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x03 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x04 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x05 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x06 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x07 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x08 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x09 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0a 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x0b 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0c 0x00 0x0f
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01
+0x24 0x00 0x67 0x09 0x14 0x0d 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c
+0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c
+0x0d 0x09 0x0e 0x09 0x0f 0x09>;
+
+		marvell,caldata-txpwrlimit-5g-sub0 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0xf0 0x01 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x24 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x28 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09
+0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05
+0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x2c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09
+0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09
+0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x30
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05
+0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x34 0x01 0x0c
+0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x38 0x01 0x0c 0x02 0x0c
+0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a
+0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05
+0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05
+0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x3c 0x01 0x0c 0x02 0x0c 0x03 0x0c
+0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a
+0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05
+0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05
+0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x40 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a
+0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05
+0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>;
+
+		marvell,caldata-txpwrlimit-5g-sub1 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0xaa 0x02 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x64 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x68 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09
+0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05
+0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x6c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09
+0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09
+0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x70
+0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09
+0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05
+0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x74 0x01 0x0c
+0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x78 0x01 0x0c 0x02 0x0c
+0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a
+0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05
+0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05
+0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x7c 0x01 0x0c 0x02 0x0c 0x03 0x0c
+0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a
+0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05
+0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05
+0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x80 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a
+0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a
+0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05
+0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x84 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09
+0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x88 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08
+0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04
+0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x8c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08
+0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08
+0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>;
+
+		marvell,caldata-txpwrlimit-5g-sub2 = /bits/ 8 <
+0x01 0x00 0x06 0x00 0x36 0x01 0x89 0x01
+0x3a 0x00 0x88 0x13 0x14 0x95 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a
+0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08
+0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05
+0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00
+0x88 0x13 0x14 0x99 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a
+0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08
+0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04
+0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13
+0x14 0x9d 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08
+0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08
+0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04
+0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa1
+0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08
+0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04
+0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05
+0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa5 0x01 0x0b
+0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08
+0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04
+0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05
+0x1a 0x05 0x1b 0x05>;
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFAULT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFAULT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/*
+	 * Trackpad pin control is shared between Elan and Synaptics devices
+	 * so we have to pull it up to the bus level.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer &trackpad_int>;
+
+	trackpad@15 {
+		/*
+		 * Remove the inherited pinctrl settings to avoid clashing
+		 * with bus-wide ones.
+		 */
+		/delete-property/pinctrl-names;
+		/delete-property/pinctrl-0;
+	};
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&gpio7>;
+		interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		vcc-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 000000000..ffd1121d1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+
+	sound {
+		compatible = "rockchip,rockchip-audio-max98090";
+		rockchip,model = "VEYRON-HDMI";
+		rockchip,hdmi-codec = <&hdmi>;
+		rockchip,i2s-controller = <&i2s>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>,
+					 <&cpu1 THERMAL_NO_LIMIT 4>,
+					 <&cpu2 THERMAL_NO_LIMIT 4>,
+					 <&cpu3 THERMAL_NO_LIMIT 4>;
+		};
+		cpu_warm_limit_gpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device = <&gpu 1 1>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device = <&cpu0 5 6>, <&cpu1 5 6>, <&cpu2 5 6>,
+					 <&cpu3 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>,
+					 <&cpu3 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device = <&cpu0 7 8>, <&cpu1 7 8>, <&cpu2 7 8>,
+					 <&cpu3 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device = <&cpu0 8 THERMAL_NO_LIMIT>,
+					 <&cpu1 8 THERMAL_NO_LIMIT>,
+					 <&cpu2 8 THERMAL_NO_LIMIT>,
+					 <&cpu3 8 THERMAL_NO_LIMIT>;
+		};
+
+		/* At very hot, don't let GPU go over 300 MHz */
+		cpu_very_hot_limit_gpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device = <&gpu 2 2>;
+		};
+	};
+};
+
+&gpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		gpu_alert_warmish: gpu_alert_warmish {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_warm: gpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_hotter: gpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_alert_very_very_hot: gpu_alert_very_very_hot {
+			temperature = <86000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/* After 1st level throttle the GPU down to as low as 400 MHz */
+		gpu_warmish_limit_gpu {
+			trip = <&gpu_alert_warmish>;
+			cooling-device = <&gpu THERMAL_NO_LIMIT 1>;
+		};
+
+		/*
+		 * Slightly after we throttle the GPU, we'll also make sure that
+		 * the CPU can't go faster than 1.4 GHz.  Note that we won't
+		 * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll
+		 * let the CPU do the rest itself.
+		 */
+		gpu_warm_limit_cpu {
+			trip = <&gpu_alert_warm>;
+			cooling-device = <&cpu0 4 4>,
+					 <&cpu1 4 4>,
+					 <&cpu2 4 4>,
+					 <&cpu3 4 4>;
+		};
+
+		/* When hot, GPU goes down to 300 MHz */
+		gpu_hotter_limit_gpu {
+			trip = <&gpu_alert_hotter>;
+			cooling-device = <&gpu 2 2>;
+		};
+
+		/* When really hot, don't let GPU go _above_ 300 MHz */
+		gpu_very_very_hot_limit_gpu {
+			trip = <&gpu_alert_very_very_hot>;
+			cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "",
+			  "",
+			  "",
+			  "PMIC_INT_L",
+			  "POWER_BUTTON_L",
+			  "",
+			  "",
+
+			  "",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OT_RESET",
+			  "",
+			  "",
+			  "AP_WARM_RESET_H",
+			  "",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "",
+			  "nFALUT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "",
+			  "EMMC_RST_L";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS_L",
+			  "UART0_RTS_L",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "PWM_LOG",
+			  "",
+			  "",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+
+			  "CPU_NMI",
+			  "DVSOK",
+			  "HDMI_WAKE",
+			  "POWER_HDMI_ON",
+			  "DVS1",
+			  "",
+			  "",
+			  "DVS2",
+
+			  "HDMI_CEC",
+			  "",
+			  "",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
new file mode 100644
index 000000000..fa695a88f
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Mighty Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-jaq.dts"
+
+/ {
+	model = "Google Mighty";
+	compatible = "google,veyron-mighty-rev5", "google,veyron-mighty-rev4",
+		     "google,veyron-mighty-rev3", "google,veyron-mighty-rev2",
+		     "google,veyron-mighty-rev1", "google,veyron-mighty",
+		     "google,veyron", "rockchip,rk3288";
+};
+
+&sdmmc {
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_wp_pin &sdmmc_bus4>;
+	wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ disable-wp;
+};
+
+&pinctrl {
+	sdmmc {
+		sdmmc_wp_pin: sdmmc-wp-pin {
+			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
new file mode 100644
index 000000000..f8b69e0a1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Minnie Rev 0+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
+
+/ {
+	model = "Google Minnie";
+	compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+	volume_buttons: volume-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&volum_down_l &volum_up_l>;
+
+		volum_down {
+			label = "Volum_down";
+			gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <100>;
+		};
+
+		volum_up {
+			label = "Volum_up";
+			gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <0 3 255>;
+	num-interpolated-steps = <252>;
+};
+
+&i2c_tunnel {
+	battery: bq27500@55 {
+		compatible = "ti,bq27500";
+		reg = <0x55>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01";
+
+	/delete-node/ panel-timing;
+
+	panel-timing {
+		clock-frequency = <66666667>;
+		hactive = <1280>;
+		hfront-porch = <18>;
+		hback-porch = <21>;
+		hsync-len = <32>;
+		vactive = <800>;
+		vfront-porch = <4>;
+		vback-porch = <8>;
+		vsync-len = <18>;
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+
+	regulators {
+		vcc33_touch: LDO_REG2 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "vcc33_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc5v_touch: SWITCH_REG2 {
+			regulator-name = "vcc5v_touch";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PROCHOT#",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN",
+			  "TOUCH_INT",
+			  "TOUCH_RST",
+
+			  "I2C3_SCL_TP",
+			  "I2C3_SDA_TP";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "dev_wake",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "Volum_Up#",
+			  "Volum_Down#",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "",
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "SDMMC_WP",
+			  "EDP_HPD",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		volum_down_l: volum-down-l {
+			rockchip,pins = <5 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		volum_up_l: volum-up-l {
+			rockchip,pins = <5 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	prochot {
+		gpio_prochot: gpio-prochot {
+			rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
new file mode 100644
index 000000000..4e9fdb0f7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Pinky Rev 2 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Pinky";
+	compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+	/delete-node/backlight-regulator;
+	/delete-node/panel-regulator;
+	/delete-node/emmc-pwrseq;
+	/delete-node/vcc18-lcd;
+};
+
+&backlight {
+	/delete-property/power-supply;
+};
+
+&emmc {
+	/*
+	 * Use a pullup instead of a drive since the output is 3.3V and
+	 * really should be 1.8V (oops).  The external pulldown will help
+	 * bring the voltage down if we only drive with a pullup here.
+	 * Therefore disable the powerseq (and actual reset) for pinky.
+	 */
+	/delete-property/mmc-pwrseq;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
+};
+
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&lid_switch {
+	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
+
+	power {
+		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Touchpad connector */
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+&panel {
+	power-supply = <&vcc33_lcd>;
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
+	/delete-node/ lcd;
+
+	backlight {
+		/delete-node/ bl_pwr_en;
+	};
+
+	buttons {
+		pwr_key_h: pwr-key-h {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_wp_pin: sdmmc-wp-pin {
+			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk808 {
+	regulators {
+		vcc18_lcd: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_lcd";
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+		     &sdmmc_wp_pin &sdmmc_bus4>;
+	wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
+&tsadc {
+	/* Some connection is flaky making the tsadc hang the system */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
new file mode 100644
index 000000000..27fb06ce9
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for sdmmc cards
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+&io_domains {
+	sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC1 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC2 1 &pcfg_pull_none_drv_8ma>,
+					<6 RK_PC3 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * Builtin CD line is hooked to ground to prevent JTAG at boot
+		 * (and also to get the voltage rail correct).
+		 * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't
+		 * think there's a card inserted
+		 */
+		sdmmc_cd_disabled: sdmmc-cd-disabled {
+			rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD */
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	vcc9-supply = <&vcc_5v>;
+
+	regulators {
+		vccio_sd: LDO_REG4 {
+			regulator-name = "vccio_sd";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		vcc33_sd: LDO_REG5 {
+			regulator-name = "vcc33_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
new file mode 100644
index 000000000..4a3ea934d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Speedy Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Speedy";
+	compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&cpu_crit {
+	temperature = <90000>;
+};
+
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&gpu_alert0 {
+	temperature = <80000>;
+};
+
+&gpu_crit {
+	temperature = <90000>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&gpio0 {
+	gpio-line-names = "PMIC_SLEEP_AP",
+			  "DDRIO_PWROFF",
+			  "DDRIO_RETEN",
+			  "TS3A227E_INT_L",
+			  "PMIC_INT_L",
+			  "PWR_KEY_L",
+			  "AP_LID_INT_L",
+			  "EC_IN_RW",
+
+			  "AC_PRESENT_AP",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
+			  "OTP_OUT",
+			  "HOST1_PWR_EN",
+			  "USBOTG_PWREN_H",
+			  "AP_WARM_RESET_H",
+			  "nFALUT2",
+			  "I2C0_SDA_PMIC",
+
+			  "I2C0_SCL_PMIC",
+			  "SUSPEND_L",
+			  "USB_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CONFIG3",
+
+			  "PWRLIMIT#_CPU",
+			  "EMMC_RST_L",
+			  "",
+			  "",
+			  "BL_PWR_EN",
+			  "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+	gpio-line-names = "FLASH0_D0",
+			  "FLASH0_D1",
+			  "FLASH0_D2",
+			  "FLASH0_D3",
+			  "FLASH0_D4",
+			  "FLASH0_D5",
+			  "FLASH0_D6",
+			  "FLASH0_D7",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "FLASH0_CS2/EMMC_CMD",
+			  "",
+			  "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "UART0_RXD",
+			  "UART0_TXD",
+			  "UART0_CTS",
+			  "UART0_RTS",
+			  "SDIO0_D0",
+			  "SDIO0_D1",
+			  "SDIO0_D2",
+			  "SDIO0_D3",
+
+			  "SDIO0_CMD",
+			  "SDIO0_CLK",
+			  "BT_DEV_WAKE",
+			  "",
+			  "WIFI_ENABLE_H",
+			  "BT_ENABLE_L",
+			  "WIFI_HOST_WAKE",
+			  "BT_HOST_WAKE";
+};
+
+&gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPI0_CLK",
+			  "SPI0_CS0",
+			  "SPI0_TXD",
+			  "SPI0_RXD",
+
+			  "",
+			  "",
+			  "",
+			  "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+	gpio-line-names = "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI",
+			  "I2S0_SDO0",
+			  "HP_DET_H",
+			  "ALS_INT",		/* not connected */
+			  "INT_CODEC",
+
+			  "I2S0_CLK",
+			  "I2C2_SDA",
+			  "I2C2_SCL",
+			  "MICDET",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "SDMMC_D0",
+			  "SDMMC_D1",
+			  "SDMMC_D2",
+			  "SDMMC_D3",
+			  "SDMMC_CLK",
+			  "SDMMC_CMD";
+};
+
+&gpio7 {
+	gpio-line-names = "LCDC_BL",
+			  "PWM_LOG",
+			  "BL_EN",
+			  "TRACKPAD_INT",
+			  "TPM_INT_H",
+			  "SDMMC_DET_L",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EC_INT",
+
+			  "CPU_NMI",
+			  "DVS_OK",
+			  "",
+			  "EDP_HOTPLUG",
+			  "DVS1",
+			  "nFALUT1",
+			  "LCD_EN",
+			  "DVS2",
+
+			  "VCC5V_GOOD_H",
+			  "I2C4_SDA_TP",
+			  "I2C4_SCL_TP",
+			  "I2C5_SDA_HDMI",
+			  "I2C5_SCL_HDMI",
+			  "5V_DRV",
+			  "UART2_RXD",
+			  "UART2_TXD";
+};
+
+&gpio8 {
+	gpio-line-names = "RAM_ID0",
+			  "RAM_ID1",
+			  "RAM_ID2",
+			  "RAM_ID3",
+			  "I2C1_SDA_TPM",
+			  "I2C1_SCL_TPM",
+			  "SPI2_CLK",
+			  "SPI2_CS0",
+
+			  "SPI2_RXD",
+			  "SPI2_TXD";
+};
+
+&pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
new file mode 100644
index 000000000..069f0c2c1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron Tiger Rev 0+ board device tree source
+ *
+ * Copyright 2016 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3288-veyron-fievel.dts"
+#include "rk3288-veyron-edp.dtsi"
+
+/ {
+	model = "Google Tiger";
+	compatible = "google,veyron-tiger-rev8", "google,veyron-tiger-rev7",
+		     "google,veyron-tiger-rev6", "google,veyron-tiger-rev5",
+		     "google,veyron-tiger-rev4", "google,veyron-tiger-rev3",
+		     "google,veyron-tiger-rev2", "google,veyron-tiger-rev1",
+		     "google,veyron-tiger-rev0", "google,veyron-tiger",
+		     "google,veyron", "rockchip,rk3288";
+
+	/delete-node/ vcc18-lcd;
+};
+
+&backlight {
+	/* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <0 3 255>;
+	num-interpolated-steps = <252>;
+};
+
+&backlight_regulator {
+	vin-supply = <&vccsys>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_io>;
+		vccio-supply = <&vcc33_io>;
+		wakeup-source;
+	};
+};
+
+&panel {
+	compatible = "auo,b101ean01";
+
+	/delete-node/ panel-timing;
+
+	panel-timing {
+		clock-frequency = <66666667>;
+		hactive = <1280>;
+		hfront-porch = <18>;
+		hback-porch = <21>;
+		hsync-len = <32>;
+		vactive = <800>;
+		vfront-porch = <4>;
+		vback-porch = <8>;
+		vsync-len = <18>;
+	};
+};
+
+&pinctrl {
+	lcd {
+		/delete-node/ avdd-1v8-disp-en;
+	};
+
+	touchscreen {
+		touch_int: touch-int {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		touch_rst: touch-rst {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
new file mode 100644
index 000000000..54a6838d7
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ */
+
+#include <dt-bindings/clock/rockchip,rk808.h>
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+
+	power_button: power-button {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		power {
+			label = "Power";
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_warm_reset_h>;
+		priority = <200>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 RK808_CLKOUT1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * Depending on the actual card populated GPIO4 D4
+		 * correspond to one of these signals on the module:
+		 *
+		 * D4:
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_5v: vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc33_sys: vcc33-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vdd_logic: vdd-logic {
+		compatible = "pwm-regulator";
+		regulator-name = "vdd_logic";
+
+		pwms = <&pwm1 0 1994 0>;
+		pwm-supply = <&vcc33_sys>;
+
+		pwm-dutycycle-range = <0x7b 0>;
+		pwm-dutycycle-unit = <0x94>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <4000>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&cpu_crit {
+	temperature = <100000>;
+};
+
+/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
+&cpu_opp_table {
+	/delete-node/ opp-312000000;
+
+	opp-1512000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <1300000>;
+	};
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
+};
+
+&emmc {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	rockchip,default-sample-phase = <158>;
+	disable-wp;
+	mmc-hs200-1_8v;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gpu_alert0 {
+	temperature = <72500>;
+};
+
+&gpu_crit {
+	temperature = <100000>;
+};
+
+&hdmi {
+	pinctrl-names = "default", "unwedge";
+	pinctrl-0 = <&hdmi_ddc>;
+	pinctrl-1 = <&hdmi_ddc_unwedge>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 45ns measured */
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "wifibt_32kin";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc33_sys>;
+		vcc2-supply = <&vcc33_sys>;
+		vcc3-supply = <&vcc33_sys>;
+		vcc4-supply = <&vcc33_sys>;
+		vcc6-supply = <&vcc_5v>;
+		vcc7-supply = <&vcc33_sys>;
+		vcc8-supply = <&vcc33_sys>;
+		vcc12-supply = <&vcc_18>;
+		vddio-supply = <&vcc33_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc135_ddr: DCDC_REG3 {
+				regulator-name = "vcc135_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/*
+			 * vcc_18 has several aliases.  (vcc18_flashio and
+			 * vcc18_wl).  We'll add those aliases here just to
+			 * make it easier to follow the schematic.  The signals
+			 * are actually hooked together and only separated for
+			 * power measurement purposes).
+			 */
+			vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/*
+			 * Note that both vcc33_io and vcc33_pmuio are always
+			 * powered together. To simplify the logic in the dts
+			 * we just refer to vcc33_io every time something is
+			 * powered from vcc33_pmuio. In fact, on later boards
+			 * (such as danger) they're the same net.
+			 */
+			vcc33_io: LDO_REG1 {
+				regulator-name = "vcc33_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd10_lcd_pwren_h: LDO_REG7 {
+				regulator-name = "vdd10_lcd_pwren_h";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc33_lcd: SWITCH_REG1 {
+				regulator-name = "vcc33_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 2.5ns measured */
+	i2c-scl-rising-time-ns = <100>;		/* 40ns measured */
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 100kHz since 4.7k resistors don't rise fast enough */
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <50>;		/* 10ns measured */
+	i2c-scl-rising-time-ns = <800>;		/* 600ns measured */
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;		/* 11ns measured */
+	i2c-scl-rising-time-ns = <300>;		/* 225ns measured */
+};
+
+&io_domains {
+	status = "okay";
+
+	bb-supply = <&vcc33_io>;
+	dvp-supply = <&vcc_18>;
+	flash0-supply = <&vcc18_flashio>;
+	gpio1830-supply = <&vcc33_io>;
+	gpio30-supply = <&vcc33_io>;
+	lcdc-supply = <&vcc33_lcd>;
+	wifi-supply = <&vcc18_wl>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdio0 {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc33_sys>;
+	vqmmc-supply = <&vcc18_wl>;
+};
+
+&spi2 {
+	status = "okay";
+
+	rx-sample-delay-ns = <12>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-temp = <125000>;
+};
+
+&uart0 {
+	status = "okay";
+
+	/* Pins don't include flow control by default; add that in */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+
+	needs-reset-on-resume;
+};
+
+&usb_host1 {
+	status = "okay";
+	snps,need-phy-for-wake;
+};
+
+&usb_otg {
+	status = "okay";
+
+	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
+	assigned-clock-parents = <&usbphy0>;
+	dr_mode = "host";
+	snps,need-phy-for-wake;
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run eMMC at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		emmc_clk: emmc-clk {
+			rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_cmd: emmc-cmd {
+			rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_none_drv_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_none_drv_8ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	reboot {
+		ap_warm_reset_h: ap-warm-reset-h {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	recovery-switch {
+		rec_mode_l: rec-mode-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio0 {
+		wifi_enable_h: wifienable-h {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* NOTE: mislabelled on schematic; should be bt_enable_h */
+		bt_enable_l: bt-enable-l {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/*
+		 * We run sdio0 at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC5 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC6 1 &pcfg_pull_none_drv_8ma>,
+					<4 RK_PC7 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		/*
+		 * These pins are only present on very new veyron boards; on
+		 * older boards bt_dev_wake is simply always high.  Note that
+		 * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt
+		 * to map this pin everywhere
+		 */
+		bt_dev_wake_sleep: bt-dev-wake-sleep {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		bt_dev_wake_awake: bt-dev-wake-awake {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		bt_dev_wake: bt-dev-wake {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tpm {
+		tpm_int_h: tpm-int-h {
+			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	write-protect {
+		fw_wp_ap: fw-wp-ap {
+			rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
new file mode 100644
index 000000000..4a373f5aa
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
+
+	vccio_flash: vccio-flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	phy-supply = <&vcc_io>;
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_codec: LDO_REG2 {
+				regulator-name = "vcca_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-name = "vcc_wl";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	bb-supply = <&vcc_io>;
+	flash0-supply = <&vccio_flash>;
+	gpio1830-supply = <&vcc_18>;
+	gpio30-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+};
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
new file mode 100644
index 000000000..b156a83eb
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+
+/ {
+	model = "Amarula Vyasa-RK3288";
+	compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	dc12_vbat: dc12-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "dc12_vbat";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vboot_3v3: vboot-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vboot_5v: vboot-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_sv";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	v3g_3v3: v3g-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vsus_5v: vsus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vsus_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc50_hdmi_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	vusb1_5v: vusb1-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb1_5v";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsus_5v>;
+	};
+
+	vusb2_5v: vusb2-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb2_5v";
+		enable-active-high;
+		gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_codec: LDO_REG2 {
+				regulator-name = "vcc_codec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_gps: LDO_REG4 {
+				regulator-name = "vcc_gps";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_18>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_io>;
+	flash0-supply = <&vcc_18>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy_pwr_en>;
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vusb1_5v>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb_host {
+		phy_pwr_en: phy-pwr-en {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
new file mode 100644
index 000000000..250a03a06
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -0,0 +1,2017 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "rockchip,rk3288";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio0;
+		mshc3 = &sdio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a12-pmu";
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+		rockchip,pmu = <&pmu>;
+
+		cpu0: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x500>;
+			resets = <&cru SRST_CORE0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <370>;
+		};
+		cpu1: cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x501>;
+			resets = <&cru SRST_CORE1>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <370>;
+		};
+		cpu2: cpu@502 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x502>;
+			resets = <&cru SRST_CORE2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <370>;
+		};
+		cpu3: cpu@503 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x503>;
+			resets = <&cru SRST_CORE3>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <370>;
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-126000000 {
+			opp-hz = /bits/ 64 <126000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-696000000 {
+			opp-hz = /bits/ 64 <696000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1300000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1350000>;
+		};
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dmac_peri: dma-controller@ff250000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff250000 0x0 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac_bus_ns: dma-controller@ff600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xff600000 0x0 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac_bus_s: dma-controller@ffb20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xffb20000 0x0 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The rk3288 cannot use the memory area above 0xfe000000
+		 * for dma operations for some reason. While there is
+		 * probably a better solution available somewhere, we
+		 * haven't found it yet and while devices with 2GB of ram
+		 * are not affected, this issue prevents 4GB from booting.
+		 * So to make these devices at least bootable, block
+		 * this area for the time being until the real solution
+		 * is found.
+		 */
+		dma-unusable@fe000000 {
+			reg = <0x0 0xfe000000 0x0 0x1000000>;
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	timer: timer@ff810000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	sdmmc: mmc@ff0c0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0xff0c0000 0x0 0x4000>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio0: mmc@ff0d0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0xff0d0000 0x0 0x4000>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio1: mmc@ff0e0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
+			 <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0xff0e0000 0x0 0x4000>;
+		resets = <&cru SRST_SDIO1>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@ff0f0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0 0xff0f0000 0x0 0x4000>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff140000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 1>, <&dmac_peri 2>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 3>, <&dmac_peri 4>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff690000 0x0 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 7>, <&dmac_peri 8>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac_peri 9>, <&dmac_peri 10>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		reserve_thermal: reserve_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+		};
+
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>,
+						<&cpu1 THERMAL_NO_LIMIT 6>,
+						<&cpu2 THERMAL_NO_LIMIT 6>,
+						<&cpu3 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu_thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 2>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3288-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3288-gmac";
+		reg = <0x0 0xff290000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		resets = <&cru SRST_MAC>;
+		reset-names = "stmmaceth";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff500000 0x0 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	/* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
+	usb_host0_ohci: usb@ff520000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff520000 0x0 0x100>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1: usb@ff540000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x0 0xff540000 0x0 0x40000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		phys = <&usbphy2>;
+		phy-names = "usb2-phy";
+		snps,reset-phy-on-wake;
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_hsic: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff5c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff650000 0x0 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff660000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x0 0xff660000 0x0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_RKPWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_RKPWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_RKPWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_RKPWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	bus_intmem: sram@ff700000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xff700000 0x0 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0xff700000 0x18000>;
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	pmu_sram: sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0x0 0xff720000 0x0 0x1000>;
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff730000 0x0 0x100>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3288-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			assigned-clocks = <&cru SCLK_EDP_24M>;
+			assigned-clock-parents = <&xin24m>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_LVDS_*	LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			power-domain@RK3288_PD_VIO {
+				reg = <RK3288_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_VOP0>,
+					 <&cru ACLK_VOP1>,
+					 <&cru DCLK_VOP0>,
+					 <&cru DCLK_VOP1>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP0>,
+					 <&cru HCLK_VOP1>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_LVDS_PHY>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru PCLK_MIPI_DSI1>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_ISP_JPE>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>;
+				pm_qos = <&qos_vio0_iep>,
+					 <&qos_vio1_vop>,
+					 <&qos_vio1_isp_w0>,
+					 <&qos_vio1_isp_w1>,
+					 <&qos_vio0_vop>,
+					 <&qos_vio0_vip>,
+					 <&qos_vio2_rga_r>,
+					 <&qos_vio2_rga_w>,
+					 <&qos_vio1_isp_r>;
+			};
+
+			/*
+			 * Note: The following 3 are HEVC(H.265) clocks,
+			 * and on the ACLK_HEVC_NIU (NOC).
+			 */
+			power-domain@RK3288_PD_HEVC {
+				reg = <RK3288_PD_HEVC>;
+				clocks = <&cru ACLK_HEVC>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_hevc_r>,
+					 <&qos_hevc_w>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			power-domain@RK3288_PD_VIDEO {
+				reg = <RK3288_PD_VIDEO>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			power-domain@RK3288_PD_GPU {
+				reg = <RK3288_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu_r>,
+					 <&qos_gpu_w>;
+			};
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x94>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	sgrf: syscon@ff740000 {
+		compatible = "rockchip,rk3288-sgrf", "syscon";
+		reg = <0x0 0xff740000 0x0 0x1000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3288-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+				  <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+				  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+				  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+				  <&cru PCLK_PERI>;
+		assigned-clock-rates = <594000000>, <400000000>,
+				       <500000000>, <300000000>,
+				       <150000000>, <75000000>,
+				       <300000000>, <150000000>,
+				       <75000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		edp_phy: edp-phy {
+			compatible = "rockchip,rk3288-dp-phy";
+			clocks = <&cru SCLK_EDP_24M>;
+			clock-names = "24m";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3288-io-voltage-domain";
+			status = "disabled";
+		};
+
+		usbphy: usbphy {
+			compatible = "rockchip,rk3288-usb-phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usbphy0: usb-phy@320 {
+				#phy-cells = <0>;
+				reg = <0x320>;
+				clocks = <&cru SCLK_OTGPHY0>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+				resets = <&cru SRST_USBOTG_PHY>;
+				reset-names = "phy-reset";
+			};
+
+			usbphy1: usb-phy@334 {
+				#phy-cells = <0>;
+				reg = <0x334>;
+				clocks = <&cru SCLK_OTGPHY1>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+				resets = <&cru SRST_USBHOST0_PHY>;
+				reset-names = "phy-reset";
+			};
+
+			usbphy2: usb-phy@348 {
+				#phy-cells = <0>;
+				reg = <0x348>;
+				clocks = <&cru SCLK_OTGPHY2>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+				resets = <&cru SRST_USBHOST1_PHY>;
+				reset-names = "phy-reset";
+			};
+		};
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff800000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	spdif: sound@ff8b0000 {
+		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+		reg = <0x0 0xff8b0000 0x0 0x10000>;
+		#sound-dai-cells = <0>;
+		clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac_bus_s 3>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2s: i2s@ff890000 {
+		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x10000>;
+		#sound-dai-cells = <0>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
+		status = "disabled";
+	};
+
+	crypto: crypto@ff8a0000 {
+		compatible = "rockchip,rk3288-crypto";
+		reg = <0x0 0xff8a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+		status = "okay";
+	};
+
+	iep_mmu: iommu@ff900800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff900800 0x0 0x40>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "iep_mmu";
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp_mmu";
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	rga: rga@ff920000 {
+		compatible = "rockchip,rk3288-rga";
+		reg = <0x0 0xff920000 0x0 0x180>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+		clock-names = "aclk", "hclk", "sclk";
+		power-domains = <&power RK3288_PD_VIO>;
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+		reset-names = "core", "axi", "ahb";
+	};
+
+	vopb: vop@ff930000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+
+			vopb_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&lvds_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff930300 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopb_mmu";
+		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3288_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff940000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0x0 0xff940000 0x0 0x19c>, <0x0 0xff941000 0x0 0x1000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&lvds_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff940300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff940300 0x0 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopl_mmu";
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3288_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x4000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
+	lvds: lvds@ff96c000 {
+		compatible = "rockchip,rk3288-lvds";
+		reg = <0x0 0xff96c000 0x0 0x4000>;
+		clocks = <&cru PCLK_LVDS_PHY>;
+		clock-names = "pclk_lvds";
+		pinctrl-names = "lcdc";
+		pinctrl-0 = <&lcdc_ctl>;
+		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lvds_in: port@0 {
+				reg = <0>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+				lvds_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
+	};
+
+	edp: dp@ff970000 {
+		compatible = "rockchip,rk3288-dp";
+		reg = <0x0 0xff970000 0x0 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		phys = <&edp_phy>;
+		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
+		resets = <&cru SRST_EDP>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
+	hdmi: hdmi@ff980000 {
+		compatible = "rockchip,rk3288-dw-hdmi";
+		reg = <0x0 0xff980000 0x0 0x20000>;
+		reg-io-width = <4>;
+		#sound-dai-cells = <0>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
+		power-domains = <&power RK3288_PD_VIO>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	vpu: video-codec@ff9a0000 {
+		compatible = "rockchip,rk3288-vpu";
+		reg = <0x0 0xff9a0000 0x0 0x800>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3288_PD_VIDEO>;
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0800 0x0 0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vpu_mmu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3288_PD_VIDEO>;
+	};
+
+	hevc_mmu: iommu@ff9c0440 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hevc_mmu";
+		clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	gpu: gpu@ffa30000 {
+		compatible = "rockchip,rk3288-mali", "arm,mali-t760";
+		reg = <0x0 0xffa30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru ACLK_GPU>;
+		operating-points-v2 = <&gpu_opp_table>;
+		#cooling-cells = <2>; /* min followed by max */
+		power-domains = <&power RK3288_PD_GPU>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1250000>;
+		};
+	};
+
+	qos_gpu_r: qos@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_gpu_w: qos@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_vio1_vop: qos@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_vio1_isp_w0: qos@ffad0100 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0100 0x0 0x20>;
+	};
+
+	qos_vio1_isp_w1: qos@ffad0180 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0180 0x0 0x20>;
+	};
+
+	qos_vio0_vop: qos@ffad0400 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0400 0x0 0x20>;
+	};
+
+	qos_vio0_vip: qos@ffad0480 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0480 0x0 0x20>;
+	};
+
+	qos_vio0_iep: qos@ffad0500 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0500 0x0 0x20>;
+	};
+
+	qos_vio2_rga_r: qos@ffad0800 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0800 0x0 0x20>;
+	};
+
+	qos_vio2_rga_w: qos@ffad0880 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0880 0x0 0x20>;
+	};
+
+	qos_vio1_isp_r: qos@ffad0900 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0900 0x0 0x20>;
+	};
+
+	qos_video: qos@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	qos_hevc_r: qos@ffaf0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaf0000 0x0 0x20>;
+	};
+
+	qos_hevc_w: qos@ffaf0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaf0080 0x0 0x20>;
+	};
+
+	efuse: efuse@ffb40000 {
+		compatible = "rockchip,rk3288-efuse";
+		reg = <0x0 0xffb40000 0x0 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_id: cpu-id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
+	gic: interrupt-controller@ffc01000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x0 0xffc01000 0x0 0x1000>,
+		      <0x0 0xffc02000 0x0 0x2000>,
+		      <0x0 0xffc04000 0x0 0x2000>,
+		      <0x0 0xffc06000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3288-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio0@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@ff7b0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio5@ff7c0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO5>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@ff7d0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio7@ff7e0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO7>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio8@ff7f0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO8>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		hdmi {
+			hdmi_cec_c0: hdmi-cec-c0 {
+				rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			hdmi_cec_c7: hdmi-cec-c7 {
+				rockchip,pins = <7 RK_PC7 4 &pcfg_pull_none>;
+			};
+
+			hdmi_ddc: hdmi-ddc {
+				rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
+						<7 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			hdmi_ddc_unwedge: hdmi-ddc-unwedge {
+				rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
+						<7 RK_PC4 2 &pcfg_pull_none>;
+			};
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		suspend {
+			global_pwroff: global-pwroff {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			ddr0_retention: ddr0-retention {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>;
+			};
+
+			ddr1_retention: ddr1-retention {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
+			};
+		};
+
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins = <7 RK_PB3 2 &pcfg_pull_down>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>,
+						<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <8 RK_PA4 1 &pcfg_pull_none>,
+						<8 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <6 RK_PB1 1 &pcfg_pull_none>,
+						<6 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <7 RK_PC1 1 &pcfg_pull_none>,
+						<7 RK_PC2 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <7 RK_PC3 1 &pcfg_pull_none>,
+						<7 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <6 RK_PA0 1 &pcfg_pull_none>,
+						<6 RK_PA1 1 &pcfg_pull_none>,
+						<6 RK_PA2 1 &pcfg_pull_none>,
+						<6 RK_PA3 1 &pcfg_pull_none>,
+						<6 RK_PA4 1 &pcfg_pull_none>,
+						<6 RK_PB0 1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_ctl: lcdc-ctl {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+						<1 RK_PD1 1 &pcfg_pull_none>,
+						<1 RK_PD2 1 &pcfg_pull_none>,
+						<1 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <6 RK_PC6 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up>,
+						<6 RK_PC1 1 &pcfg_pull_up>,
+						<6 RK_PC2 1 &pcfg_pull_up>,
+						<6 RK_PC3 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <4 RK_PC4 1 &pcfg_pull_up>,
+						<4 RK_PC5 1 &pcfg_pull_up>,
+						<4 RK_PC6 1 &pcfg_pull_up>,
+						<4 RK_PC7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <4 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <4 RK_PD2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <4 RK_PD3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <4 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <4 RK_PD5 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <4 RK_PD6 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio1 {
+			sdio1_bus1: sdio1-bus1 {
+				rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>;
+			};
+
+			sdio1_bus4: sdio1-bus4 {
+				rockchip,pins = <3 RK_PD0 4 &pcfg_pull_up>,
+						<3 RK_PD1 4 &pcfg_pull_up>,
+						<3 RK_PD2 4 &pcfg_pull_up>,
+						<3 RK_PD3 4 &pcfg_pull_up>;
+			};
+
+			sdio1_cd: sdio1-cd {
+				rockchip,pins = <3 RK_PD4 4 &pcfg_pull_up>;
+			};
+
+			sdio1_wp: sdio1-wp {
+				rockchip,pins = <3 RK_PD5 4 &pcfg_pull_up>;
+			};
+
+			sdio1_bkpwr: sdio1-bkpwr {
+				rockchip,pins = <3 RK_PD6 4 &pcfg_pull_up>;
+			};
+
+			sdio1_int: sdio1-int {
+				rockchip,pins = <3 RK_PD7 4 &pcfg_pull_up>;
+			};
+
+			sdio1_cmd: sdio1-cmd {
+				rockchip,pins = <4 RK_PA6 4 &pcfg_pull_up>;
+			};
+
+			sdio1_clk: sdio1-clk {
+				rockchip,pins = <4 RK_PA7 4 &pcfg_pull_none>;
+			};
+
+			sdio1_pwr: sdio1-pwr {
+				rockchip,pins = <4 RK_PB1 4 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 RK_PC0 2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <3 RK_PB1 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
+						<3 RK_PA1 2 &pcfg_pull_up>,
+						<3 RK_PA2 2 &pcfg_pull_up>,
+						<3 RK_PA3 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <3 RK_PA0 2 &pcfg_pull_up>,
+						<3 RK_PA1 2 &pcfg_pull_up>,
+						<3 RK_PA2 2 &pcfg_pull_up>,
+						<3 RK_PA3 2 &pcfg_pull_up>,
+						<3 RK_PA4 2 &pcfg_pull_up>,
+						<3 RK_PA5 2 &pcfg_pull_up>,
+						<3 RK_PA6 2 &pcfg_pull_up>,
+						<3 RK_PA7 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <5 RK_PB4 1 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <5 RK_PB5 1 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <5 RK_PB6 1 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <5 RK_PB7 1 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <5 RK_PC0 1 &pcfg_pull_up>;
+			};
+		};
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <7 RK_PB4 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <7 RK_PB5 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <7 RK_PB6 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <7 RK_PB7 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_cs1: spi2-cs1 {
+				rockchip,pins = <8 RK_PA3 1 &pcfg_pull_up>;
+			};
+			spi2_clk: spi2-clk {
+				rockchip,pins = <8 RK_PA6 1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <8 RK_PA7 1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <8 RK_PB0 1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <8 RK_PB1 1 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <4 RK_PC0 1 &pcfg_pull_up>,
+						<4 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <4 RK_PC2 1 &pcfg_pull_up>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <4 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <5 RK_PB0 1 &pcfg_pull_up>,
+						<5 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <5 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <5 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <7 RK_PC6 1 &pcfg_pull_up>,
+						<7 RK_PC7 1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <7 RK_PA7 1 &pcfg_pull_up>,
+						<7 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <7 RK_PB1 1 &pcfg_pull_up>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <7 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <5 RK_PB7 3 &pcfg_pull_up>,
+						<5 RK_PB6 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <5 RK_PB4 3 &pcfg_pull_up>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <5 RK_PB5 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <7 RK_PA0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <7 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <7 RK_PC6 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <7 RK_PC7 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
+						<3 RK_PD7 3 &pcfg_pull_none>,
+						<3 RK_PD2 3 &pcfg_pull_none>,
+						<3 RK_PD3 3 &pcfg_pull_none>,
+						<3 RK_PD4 3 &pcfg_pull_none_12ma>,
+						<3 RK_PD5 3 &pcfg_pull_none_12ma>,
+						<3 RK_PD0 3 &pcfg_pull_none_12ma>,
+						<3 RK_PD1 3 &pcfg_pull_none_12ma>,
+						<4 RK_PA0 3 &pcfg_pull_none>,
+						<4 RK_PA5 3 &pcfg_pull_none>,
+						<4 RK_PA6 3 &pcfg_pull_none>,
+						<4 RK_PB1 3 &pcfg_pull_none_12ma>,
+						<4 RK_PA4 3 &pcfg_pull_none_12ma>,
+						<4 RK_PA1 3 &pcfg_pull_none>,
+						<4 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <3 RK_PD6 3 &pcfg_pull_none>,
+						<3 RK_PD7 3 &pcfg_pull_none>,
+						<3 RK_PD4 3 &pcfg_pull_none>,
+						<3 RK_PD5 3 &pcfg_pull_none>,
+						<4 RK_PA0 3 &pcfg_pull_none>,
+						<4 RK_PA5 3 &pcfg_pull_none>,
+						<4 RK_PA4 3 &pcfg_pull_none>,
+						<4 RK_PA1 3 &pcfg_pull_none>,
+						<4 RK_PA2 3 &pcfg_pull_none>,
+						<4 RK_PA3 3 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <6 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
new file mode 100644
index 000000000..5edc46a55
--- /dev/null
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &emac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		mshc0 = &emmc;
+		mshc1 = &mmc0;
+		mshc2 = &mmc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmac1_s: dma-controller@20018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20018000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac1_ns: dma-controller@2001c000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x2001c000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac2: dma-controller@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMA2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+		clock-output-names = "xin24m";
+	};
+
+	gpu: gpu@10090000 {
+		compatible = "arm,mali-400";
+		reg = <0x10090000 0x10000>;
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		assigned-clocks = <&cru ACLK_GPU>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_GPU>;
+		status = "disabled";
+	};
+
+	L2: cache-controller@10138000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x10138000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	scu@1013c000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1013c000 0x100>;
+	};
+
+	global_timer: global-timer@1013c200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x1013c200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
+	};
+
+	local_timer: local-timer@1013c600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1013c600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cru CORE_PERI>;
+	};
+
+	gic: interrupt-controller@1013d000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x1013d000 0x1000>,
+		      <0x1013c100 0x0100>;
+	};
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		status = "disabled";
+	};
+
+	uart1: serial@10126000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10126000 0x400>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		status = "disabled";
+	};
+
+	qos_gpu: qos@1012d000 {
+		compatible = "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_lcdc0: qos@1012f000 {
+		compatible = "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
+	qos_cif0: qos@1012f080 {
+		compatible = "syscon";
+		reg = <0x1012f080 0x20>;
+	};
+
+	qos_ipp: qos@1012f100 {
+		compatible = "syscon";
+		reg = <0x1012f100 0x20>;
+	};
+
+	qos_lcdc1: qos@1012f180 {
+		compatible = "syscon";
+		reg = <0x1012f180 0x20>;
+	};
+
+	qos_cif1: qos@1012f200 {
+		compatible = "syscon";
+		reg = <0x1012f200 0x20>;
+	};
+
+	qos_rga: qos@1012f280 {
+		compatible = "syscon";
+		reg = <0x1012f280 0x20>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		phys = <&usbphy0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		phys = <&usbphy1>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	emac: ethernet@10204000 {
+		compatible = "snps,arc-emac";
+		reg = <0x10204000 0x3c>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref";
+		max-speed = <100>;
+		phy-mode = "rmii";
+
+		status = "disabled";
+	};
+
+	mmc0: mmc@10214000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10214000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		dmas = <&dmac2 1>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	mmc1: mmc@10218000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10218000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
+		clock-names = "biu", "ciu";
+		dmas = <&dmac2 3>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@1021c000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x1021c000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+		clock-names = "biu", "ciu";
+		dmas = <&dmac2 4>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	pmu: pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+		reg = <0x20004000 0x100>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x40>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	grf: grf@20008000 {
+		compatible = "syscon";
+		reg = <0x20008000 0x200>;
+	};
+
+	i2c0: i2c@2002d000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002d000 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@2002f000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002f000 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C1>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	pwm0: pwm@20030000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030000 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20030010 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030010 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@2004c000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@20056000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C2>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@2005a000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C3>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@2005e000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C4>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	uart2: serial@20064000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20064000 0x400>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		status = "disabled";
+	};
+
+	uart3: serial@20068000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20068000 0x400>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		status = "disabled";
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	spi0: spi@20070000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20070000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 10>, <&dmac2 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	spi1: spi@20074000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20074000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 12>, <&dmac2 13>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 000000000..26b53eac4
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vbus_host: vbus-host {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_en_oc>;
+		regulator-name = "vbus_host"; /* HOST-5V */
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_en_oc>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/rtd1195-horseradish.dts
new file mode 100644
index 000000000..9d06d3d34
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-horseradish.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "realtek,horseradish", "realtek,rtd1195";
+	model = "Realtek Horseradish EVB";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000..c7951b9a2
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "mele,x1000", "realtek,rtd1195";
+	model = "MeLE X1000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000..21897210d
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1195.h>
+
+/ {
+	compatible = "realtek,rtd1195";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@b000 {
+			reg = <0x0000b000 0x1000>;
+		};
+
+		audio@1b00000 {
+			reg = <0x01b00000 0x400000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x01ffe000 0x4000>;
+		};
+
+		secure@10000000 {
+			reg = <0x10000000 0x100000>;
+			no-map;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <27000000>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0000a800>,
+			 <0x18000000 0x18000000 0x00070000>,
+			 <0x18100000 0x18100000 0x01000000>,
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@18000000 {
+			compatible = "simple-bus";
+			reg = <0x18000000 0x70000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000000 0x70000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&reset2 RTD1195_RSTN_UR1>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
new file mode 100644
index 000000000..b1db92471
--- /dev/null
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright (C) 2018 O.S. Systems Software LTDA.
+ */
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+	model = "Elgin RV1108 R1 board";
+	compatible = "elgin,rv1108-r1", "rockchip,rv1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <275>;
+	i2c-scl-falling-time-ns = <16>;
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vdd_buck2>;
+		vcc6-supply = <&vdd_buck2>;
+
+		regulators {
+			vdd_core: DCDC_REG1 {
+				regulator-name= "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_buck2: DCDC_REG2 {
+				regulator-name= "vdd_buck2";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name= "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name= "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG1 {
+				regulator-name= "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG2 {
+				regulator-name= "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd10_pmu: LDO_REG3 {
+				regulator-name= "vdd10_pmu";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
+	status = "okay";
+
+	dh2228fv: dac@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		spi-cpha;
+		spi-cpol;
+	};
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
new file mode 100644
index 000000000..30f3d0470
--- /dev/null
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rv1108.dtsi"
+
+/ {
+	model = "Rockchip RV1108 Evaluation board";
+	compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <275>;
+	i2c-scl-falling-time-ns = <16>;
+	clock-frequency = <400000>;
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_core: DCDC_REG1 {
+				regulator-name= "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cam: DCDC_REG2 {
+				regulator-name= "vdd_cam";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name= "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name= "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG1 {
+				regulator-name= "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG2 {
+				regulator-name= "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd10_pmu: LDO_REG3 {
+				regulator-name= "vdd10_pmu";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+
+	bma250: accelerometer@19 {
+		compatible = "bosch,bma250e";
+		reg = <0x19>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
new file mode 100644
index 000000000..a1a08cb93
--- /dev/null
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -0,0 +1,934 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rv1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <75>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	amba: bus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@102a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x102a0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	bus_intmem: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 6>, <&pdma 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 4>, <&pdma 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 2>, <&pdma 3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@10240000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10240000 0x1000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@10250000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10250000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2m1_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@10260000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x10260000 0x1000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	spi: spi@10270000 {
+		compatible = "rockchip,rv1108-spi";
+		reg = <0x10270000 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@10280000 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280000 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@10280010 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280010 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@10280020 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280020 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@10280030 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x10280030 0x10>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
+		reg = <0x10300000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy@100 {
+			compatible = "rockchip,rv1108-usb2phy";
+			reg = <0x100 0x0c>;
+			clocks = <&cru SCLK_USBPHY>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "usbphy";
+			rockchip,usbgrf = <&usbgrf>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-mux";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer: timer@10350000 {
+		compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";
+		reg = <0x10350000 0x20>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	watchdog: wdt@10360000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x10360000 0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		clock-names = "pclk_wdt";
+		status = "disabled";
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <50>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@10370000 {
+		compatible = "rockchip,rv1108-tsadc";
+		reg = <0x10370000 0x100>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,hw-tshut-temp = <120000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	adc: adc@1038c000 {
+		compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
+		reg = <0x1038c000 0x100>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	i2c0: i2c@20000000 {
+		compatible = "rockchip,rv1108-i2c";
+		reg = <0x20000000 0x1000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@20040000 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040000 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20040010 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040010 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20040020 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040020 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20040030 {
+		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20040030 0x10>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmugrf: syscon@20060000 {
+		compatible = "rockchip,rv1108-pmugrf", "syscon";
+		reg = <0x20060000 0x1000>;
+	};
+
+	usbgrf: syscon@202a0000 {
+		compatible = "rockchip,rv1108-usbgrf", "syscon";
+		reg = <0x202a0000 0x1000>;
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rv1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emmc: mmc@30110000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30110000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@30120000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30120000 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@30130000 {
+		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30130000 0x4000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <100000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@30140000 {
+		compatible = "generic-ehci";
+		reg = <0x30140000 0x20000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@30160000 {
+		compatible = "generic-ohci";
+		reg = <0x30160000 0x20000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_otg: usb@30180000 {
+		compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x30180000 0x40000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	gmac: eth@30200000 {
+		compatible = "rockchip,rv1108-gmac";
+		reg = <0x30200000 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_RX>,
+			<&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		/* rv1108 only supports an rmii interface */
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x2000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1108-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0_PMU>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		emmc {
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA1 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA2 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA3 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA4 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA5 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA6 2 &pcfg_pull_up_drv_8ma>,
+						<2 RK_PA7 2 &pcfg_pull_up_drv_8ma>;
+			};
+
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =	<1 RK_PC5 2 &pcfg_pull_none>,
+						<1 RK_PC3 2 &pcfg_pull_none>,
+						<1 RK_PC4 2 &pcfg_pull_none>,
+						<1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB3 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB4 3 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PB5 3 &pcfg_pull_none>,
+						<1 RK_PB6 3 &pcfg_pull_none>,
+						<1 RK_PB7 3 &pcfg_pull_none>,
+						<1 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>,
+						<0 RK_PB2 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>,
+						<2 RK_PD4 1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>,
+						<0 RK_PC6 3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_pins: i2c2m1-pins {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>,
+						<1 RK_PD4 2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_pins: i2c2m05v-pins {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>,
+						<0 RK_PC4 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC2 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC1 1 &pcfg_pull_up_drv_4ma>,
+						<3 RK_PC0 1 &pcfg_pull_up_drv_4ma>;
+			};
+		};
+
+		spim0 {
+			spim0_clk: spim0-clk {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>;
+			};
+
+			spim0_cs0: spim0-cs0 {
+				rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>;
+			};
+
+			spim0_tx: spim0-tx {
+				rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
+			};
+
+			spim0_rx: spim0-rx {
+				rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
+			};
+		};
+
+		spim1 {
+			spim1_clk: spim1-clk {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			spim1_cs0: spim1-cs0 {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>;
+			};
+
+			spim1_rx: spim1-rx {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			spim1_tx: spim1-tx {
+				rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>;
+			};
+		};
+
+		tsadc {
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>,
+						<3 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>,
+						<1 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>,
+						<3 RK_PC2 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
new file mode 100644
index 000000000..92439ee5d
--- /dev/null
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung S3C2416 pinctrl settings
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gph-0", "gph-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gph-8", "gph-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gph-2", "gph-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gph-10", "gph-11";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gph-4", "gph-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gph-6", "gph-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gph-6", "gph-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	extuart_clk: extuart-clk {
+		samsung,pins = "gph-12";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpe-14", "gpe-15";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpe-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpe-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpe-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpl-8";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpl-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
new file mode 100644
index 000000000..47626ede6
--- /dev/null
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung SMDK2416 board device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include "s3c2416.dtsi"
+
+/ {
+	model = "SMDK2416";
+	compatible = "samsung,s3c2416";
+
+	memory@30000000 {
+		device_type = "memory";
+		reg =  <0x30000000 0x4000000>;
+	};
+
+	xti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "xti";
+		#clock-cells = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+			<&sd1_bus1>, <&sd1_bus4>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&sdhci_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+			<&sd0_bus1>, <&sd0_bus4>;
+	bus-width = <4>;
+	cd-gpios = <&gpf 1 0>;
+	cd-inverted;
+	status = "okay";
+};
+
+&uart_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+};
+
+&uart_1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+};
+
+&uart_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+};
+
+&uart_3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
new file mode 100644
index 000000000..4f084f4fe
--- /dev/null
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C2416 SoC device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/clock/s3c2443.h>
+#include "s3c24xx.dtsi"
+#include "s3c2416-pinctrl.dtsi"
+
+/ {
+	model = "Samsung S3C2416 SoC";
+	compatible = "samsung,s3c2416";
+
+	aliases {
+		serial3 = &uart_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+	uart_3: serial@5000c000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x5000C000 0x4000>;
+		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};
+
+	sdhci_1: sdhci@4ac00000 {
+		compatible = "samsung,s3c6410-sdhci";
+		reg = <0x4AC00000 0x100>;
+		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
+		status = "disabled";
+	};
+
+	sdhci_0: sdhci@4a800000 {
+		compatible = "samsung,s3c6410-sdhci";
+		reg = <0x4A800000 0x100>;
+		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
+		status = "disabled";
+	};
+};
+
+&i2c {
+	compatible = "samsung,s3c2440-i2c";
+	clocks = <&clocks PCLK_I2C0>;
+	clock-names = "i2c";
+};
+
+&intc {
+	compatible = "samsung,s3c2416-irq";
+};
+
+&pinctrl_0 {
+	compatible = "samsung,s3c2416-pinctrl";
+};
+
+&rtc {
+	compatible = "samsung,s3c2416-rtc";
+	clocks = <&clocks PCLK_RTC>;
+	clock-names = "rtc";
+};
+
+&timer {
+	clocks = <&clocks PCLK_PWM>;
+	clock-names = "timers";
+};
+
+&uart_0 {
+	compatible = "samsung,s3c2440-uart";
+	clock-names = "uart", "clk_uart_baud2",
+			"clk_uart_baud3";
+	clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+			<&clocks SCLK_UART>;
+};
+
+&uart_1 {
+	compatible = "samsung,s3c2440-uart";
+	clock-names = "uart", "clk_uart_baud2",
+			"clk_uart_baud3";
+	clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+			<&clocks SCLK_UART>;
+};
+
+&uart_2 {
+	compatible = "samsung,s3c2440-uart";
+	clock-names = "uart", "clk_uart_baud2",
+			"clk_uart_baud3";
+	clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+			<&clocks SCLK_UART>;
+};
+
+&watchdog {
+	interrupts = <1 9 27 3>;
+	clocks = <&clocks PCLK_WDT>;
+	clock-names = "watchdog";
+};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
new file mode 100644
index 000000000..06f82c7e4
--- /dev/null
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C24XX family device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/ {
+	compatible = "samsung,s3c24xx";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		serial0 = &uart_0;
+		serial1 = &uart_1;
+		serial2 = &uart_2;
+	};
+
+	intc: interrupt-controller@4a000000 {
+		compatible = "samsung,s3c2410-irq";
+		reg = <0x4a000000 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <4>;
+	};
+
+	pinctrl_0: pinctrl@56000000 {
+		reg = <0x56000000 0x1000>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,s3c2410-wakeup-eint";
+			interrupts = <0 0 0 3>,
+				     <0 0 1 3>,
+				     <0 0 2 3>,
+				     <0 0 3 3>,
+				     <0 0 4 4>,
+				     <0 0 5 4>;
+		};
+	};
+
+	timer: pwm@51000000 {
+		compatible = "samsung,s3c2410-pwm";
+		reg = <0x51000000 0x1000>;
+		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
+		#pwm-cells = <3>;
+	};
+
+	uart_0: serial@50000000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50000000 0x4000>;
+		interrupts = <1 28 0 4>, <1 28 1 4>;
+		status = "disabled";
+	};
+
+	uart_1: serial@50004000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		status = "disabled";
+	};
+
+	uart_2: serial@50008000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50008000 0x4000>;
+		interrupts = <1 15 6 4>, <1 15 7 4>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@53000000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x53000000 0x100>;
+		interrupts = <0 0 9 3>;
+		status = "disabled";
+	};
+
+	rtc: rtc@57000000 {
+		compatible = "samsung,s3c2410-rtc";
+		reg = <0x57000000 0x100>;
+		interrupts = <0 0 30 3>, <0 0 8 3>;
+		status = "disabled";
+	};
+
+	i2c: i2c@54000000 {
+		compatible = "samsung,s3c2410-i2c";
+		reg = <0x54000000 0x100>;
+		interrupts = <0 0 27 3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6400.dtsi b/arch/arm/boot/dts/s3c6400.dtsi
new file mode 100644
index 000000000..8c28e8a0c
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6400.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+	valid-mask = <0xfffffe1f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6400-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
new file mode 100644
index 000000000..0b07b3c31
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "FriendlyARM Mini6410 board based on S3C6410";
+	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+	memory@50000000 {
+		device_type = "memory";
+		reg = <0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	fin_pll: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	srom-cs1-bus@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "davicom,dm9000";
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
+			interrupt-parent = <&gpn>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			davicom,no-eeprom;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+		autorepeat;
+
+		button-k1 {
+			label = "K1";
+			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+			debounce-interval = <20>;
+		};
+
+		button-k2 {
+			label = "K2";
+			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+			debounce-interval = <20>;
+		};
+
+		button-k3 {
+			label = "K3";
+			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+			debounce-interval = <20>;
+		};
+
+		button-k4 {
+			label = "K4";
+			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+			debounce-interval = <20>;
+		};
+
+		button-k5 {
+			label = "K5";
+			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+			debounce-interval = <20>;
+		};
+
+		button-k6 {
+			label = "K6";
+			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+			debounce-interval = <20>;
+		};
+
+		button-k7 {
+			label = "K7";
+			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+			debounce-interval = <20>;
+		};
+
+		button-k8 {
+			label = "K8";
+			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led-1 {
+			label = "LED1";
+			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "LED2";
+			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-3 {
+			label = "LED3";
+			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "LED4";
+			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 1000000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_out>;
+	};
+};
+
+&clocks {
+	clocks = <&fin_pll>;
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
+
+&pinctrl0 {
+	gpio_leds: gpio-leds-pins {
+		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys-pins {
+		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
new file mode 100644
index 000000000..69c9ec4cf
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for Samsung SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "Samsung SMDK6410 board based on S3C6410";
+	compatible = "samsung,mini6410", "samsung,s3c6410";
+
+	memory@50000000 {
+		device_type = "memory";
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	fin_pll: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	srom-cs1-bus@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&clocks {
+	clocks = <&fin_pll>;
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s3c6410.dtsi b/arch/arm/boot/dts/s3c6410.dtsi
new file mode 100644
index 000000000..a766d6de6
--- /dev/null
+++ b/arch/arm/boot/dts/s3c6410.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6410";
+
+	aliases {
+		i2c1 = &i2c1;
+	};
+};
+
+&vic0 {
+	valid-mask = <0xffffff7f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	i2c1: i2c@7f00f000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x7f00f000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <5>;
+		clock-names = "i2c";
+		clocks = <&clocks PCLK_IIC1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
new file mode 100644
index 000000000..0a3186d57
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc: gpc-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd: gpd-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe: gpe-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm: gpm-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpn: gpn-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpo: gpo-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp: gpp-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq: gpq-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa-0", "gpa-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa-2", "gpa-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa-4", "gpa-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa-6", "gpa-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	ext_dma_0: ext-dma-0-pins {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	ext_dma_1: ext-dma-1-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	irda_data_0: irda-data-0-pins {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	irda_data_1: irda-data-1-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	irda_sdbw: irda-sdbw-pins {
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpb-5", "gpb-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		/* S3C6410-only */
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpc-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpc-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpg-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpg-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd0_bus1: sd0-bus1-pins {
+		samsung,pins = "gpg-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd0_bus4: sd0-bus4-pins {
+		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd1_bus1: sd1-bus1-pins {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd1_bus4: sd1-bus4-pins {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd1_bus8: sd1-bus8-pins {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+				"gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpc-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpc-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd2_bus1: sd2-bus1-pins {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	sd2_bus4: sd2-bus4-pins {
+		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s0_cdclk: i2s0-cdclk-pins {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s1_cdclk: i2s1-cdclk-pins {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		/* S3C6410-only */
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+				"gph-8", "gph-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	i2s2_cdclk: i2s2-cdclk-pins {
+		/* S3C6410-only */
+		samsung,pins = "gph-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pcm0_extclk: pcm0-extclk-pins {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pcm1_extclk: pcm1-extclk-pins {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	ac97_bus_0: ac97-bus-0-pins {
+		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	ac97_bus_1: ac97-bus-1-pins {
+		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	cam_port: cam-port-pins {
+		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
+				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	cam_rst: cam-rst-pins {
+		samsung,pins = "gpf-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	cam_field: cam-field-pins {
+		/* S3C6410-only */
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pwm_extclk: pwm-extclk-pins {
+		samsung,pins = "gpf-13";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpf-15";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	clkout0: clkout-0-pins {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col0_0: keypad-col0-0-pins {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col1_0: keypad-col1-0-pins {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col2_0: keypad-col2-0-pins {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col3_0: keypad-col3-0-pins {
+		samsung,pins = "gph-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col4_0: keypad-col4-0-pins {
+		samsung,pins = "gph-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col5_0: keypad-col5-0-pins {
+		samsung,pins = "gph-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col6_0: keypad-col6-0-pins {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col7_0: keypad-col7-0-pins {
+		samsung,pins = "gph-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col0_1: keypad-col0-1-pins {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col1_1: keypad-col1-1-pins {
+		samsung,pins = "gpl-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col2_1: keypad-col2-1-pins {
+		samsung,pins = "gpl-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col3_1: keypad-col3-1-pins {
+		samsung,pins = "gpl-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col4_1: keypad-col4-1-pins {
+		samsung,pins = "gpl-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col5_1: keypad-col5-1-pins {
+		samsung,pins = "gpl-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col6_1: keypad-col6-1-pins {
+		samsung,pins = "gpl-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_col7_1: keypad-col7-1-pins {
+		samsung,pins = "gpl-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row0_0: keypad-row0-0-pins {
+		samsung,pins = "gpk-8";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row1_0: keypad-row1-0-pins {
+		samsung,pins = "gpk-9";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row2_0: keypad-row2-0-pins {
+		samsung,pins = "gpk-10";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row3_0: keypad-row3-0-pins {
+		samsung,pins = "gpk-11";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row4_0: keypad-row4-0-pins {
+		samsung,pins = "gpk-12";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row5_0: keypad-row5-0-pins {
+		samsung,pins = "gpk-13";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row6_0: keypad-row6-0-pins {
+		samsung,pins = "gpk-14";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row7_0: keypad-row7-0-pins {
+		samsung,pins = "gpk-15";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row0_1: keypad-row0-1-pins {
+		samsung,pins = "gpn-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row1_1: keypad-row1-1-pins {
+		samsung,pins = "gpn-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row2_1: keypad-row2-1-pins {
+		samsung,pins = "gpn-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row3_1: keypad-row3-1-pins {
+		samsung,pins = "gpn-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row4_1: keypad-row4-1-pins {
+		samsung,pins = "gpn-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row5_1: keypad-row5-1-pins {
+		samsung,pins = "gpn-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row6_1: keypad-row6-1-pins {
+		samsung,pins = "gpn-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	keypad_row7_1: keypad-row7-1-pins {
+		samsung,pins = "gpn-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	lcd_ctrl: lcd-ctrl-pins {
+		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	lcd_data16: lcd-data-width16-pins {
+		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
+				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	lcd_data18: lcd-data-width18-pins {
+		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
+				"gpj-6", "gpj-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	lcd_data24: lcd-data-width24-pins {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
+				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	hsi_bus: hsi-bus-pins {
+		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
new file mode 100644
index 000000000..cb11a87db
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		pinctrl0 = &pinctrl0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic0: interrupt-controller@71200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@71300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		sdhci0: sdhci@7c200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c200000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@7c300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c300000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <25>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@7c400000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c400000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <17>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@7e004000 {
+			compatible = "samsung,s3c6410-wdt";
+			reg = <0x7e004000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks PCLK_WDT>;
+		};
+
+		i2c0: i2c@7f004000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x7f004000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <18>;
+			clock-names = "i2c";
+			clocks = <&clocks PCLK_IIC0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@7f005400 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005400 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <6>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart2: serial@7f005800 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005800 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart3: serial@7f005c00 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005c00 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7f006000 {
+			compatible = "samsung,s3c6400-pwm";
+			reg = <0x7f006000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>, <24>, <25>, <27>, <28>;
+			clock-names = "timers";
+			clocks = <&clocks PCLK_PWM>;
+			samsung,pwm-outputs = <0>, <1>;
+			#pwm-cells = <3>;
+		};
+
+		pinctrl0: pinctrl@7f008000 {
+			compatible = "samsung,s3c64xx-pinctrl";
+			reg = <0x7f008000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+
+			pctrl_int_map: pinctrl-interrupt-map {
+				interrupt-map = <0 &vic0 0>,
+						<1 &vic0 1>,
+						<2 &vic1 0>,
+						<3 &vic1 1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s3c64xx-wakeup-eint";
+				interrupts = <0>, <1>, <2>, <3>;
+				interrupt-parent = <&pctrl_int_map>;
+			};
+		};
+	};
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
new file mode 100644
index 000000000..642334803
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Aquila board.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Aquila based on S5PC110";
+	compatible = "samsung,aquila", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x18000000>;
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing clock on PMIC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	vtf_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_TF_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	pda_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1.8V_PDA";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	bat_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_BAT";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	wakeup-source;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key-1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key-2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key-3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key-4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key-5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&onenand {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <0>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vback-porch = <3>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&pinctrl0 {
+	t_flash_detect: t-flash-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
new file mode 100644
index 000000000..8f7dcd7af
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -0,0 +1,917 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 based Galaxy Aries board device tree source
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210.dtsi"
+
+/ {
+	compatible = "samsung,aries", "samsung,s5pv210";
+
+	aliases: aliases {
+		i2c4 = &i2c_sound;
+		i2c5 = &i2c_accel;
+		i2c6 = &i2c_pmic;
+		i2c7 = &i2c_musb;
+		i2c9 = &i2c_fuel;
+		i2c10 = &i2c_touchkey;
+		i2c11 = &i2c_prox;
+		i2c12 = &i2c_magnetometer;
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x2000000>;
+		};
+
+		mfc_right: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x2000000>;
+		};
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing clock on PMIC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	bt_codec: bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	vibrator_pwr: regulator-fixed-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vibrator-en";
+		enable-active-high;
+		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_ena>;
+	};
+
+	touchkey_vdd: regulator-fixed-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VTOUCH_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_vdd_ena>;
+	};
+
+	gp2a_vled: regulator-fixed-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VLED";
+		enable-active-high;
+		gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gp2a_power>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_gpio_rst>;
+		post-power-on-delay-ms = <500>;
+		power-off-delay-us = <500>;
+	};
+
+	i2c_sound: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sound_i2c_pins>;
+
+		wm8994: audio-codec@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+
+			#sound-dai-cells = <0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			clocks = <&clocks MOUT_CLKOUT>;
+			clock-names = "MCLK1";
+
+			AVDD2-supply = <&buck3_reg>;
+			DBVDD-supply = <&buck3_reg>;
+			CPVDD-supply = <&buck3_reg>;
+			SPKVDD1-supply = <&buck3_reg>;
+			SPKVDD2-supply = <&buck3_reg>;
+
+			wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
+					0xa101 0x0100 0x8100 0x0100 0x0100
+					0x0100>;
+
+			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+
+			wlf,lineout1-se;
+			wlf,lineout2-se;
+
+			assigned-clocks = <&clocks MOUT_CLKOUT>;
+			assigned-clock-rates = <0>;
+			assigned-clock-parents = <&xusbxti>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_ldo>;
+		};
+	};
+
+	i2c_accel: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_i2c_pins>;
+
+		accelerometer@38 {
+			compatible = "bosch,bma023";
+			reg = <0x38>;
+
+			vdd-supply = <&ldo9_reg>;
+			vddio-supply = <&ldo9_reg>;
+		};
+	};
+
+	i2c_pmic: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_i2c_pins>;
+
+		pmic@66 {
+			compatible = "maxim,max8998";
+			reg = <0x66>;
+			interrupt-parent = <&gph0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			max8998,pmic-buck1-default-dvs-idx = <1>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
+							<1050000>, <950000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <1600000>;
+					regulator-max-microvolt = <3600000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V_PDA";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VGA_VDDIO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VGA_DVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_ISP_HOST_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VGA_AVDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1250000>;
+					};
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vddint";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1100000>;
+					};
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+					regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+				};
+			};
+		};
+	};
+
+	i2c_musb: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&musb_i2c_pins>;
+
+		fsa9480: musb@25 {
+			compatible = "fcs,fsa9480";
+			reg = <0x25>;
+			interrupt-parent = <&gph2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&musb_irq>;
+		};
+	};
+
+	i2c_fuel: i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_i2c_pins>;
+
+		fg: fuelgauge@36 {
+			compatible = "maxim,max17040";
+			reg = <0x36>;
+		};
+	};
+
+	i2c_touchkey: i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_i2c_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_vdd>;
+			vcc-supply = <&buck3_reg>;
+			linux,keycodes = <KEY_MENU KEY_BACK
+					  KEY_HOMEPAGE KEY_SEARCH>;
+			interrupt-parent = <&gpj4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_irq>;
+		};
+	};
+
+	i2c_prox: i2c-gpio-6 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_i2c_pins>;
+
+		light-sensor@44 {
+			compatible = "sharp,gp2ap002a00f";
+			reg = <0x44>;
+			interrupt-parent = <&gph0>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&gp2a_vled>;
+			vio-supply = <&gp2a_vled>;
+			io-channels = <&gp2a_shunt>;
+			io-channel-names = "alsout";
+			sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+			sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gp2a_irq>;
+		};
+	};
+
+	i2c_magnetometer: i2c-gpio-7 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magnetometer_i2c_pins>;
+
+		status = "disabled";
+
+		/* Yamaha yas529 magnetometer, no mainline binding */
+	};
+
+	vibrator: pwm-vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm 1 44642 0>;
+		pwm-names = "enable";
+		vcc-supply = <&vibrator_pwr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_out>;
+	};
+
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_syscon>;
+		offset = <0x681c>; /* PS_HOLD_CONTROL */
+		value = <0x5200>;
+	};
+
+	spi_lcd: spi-2 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_spi_pins>;
+
+		panel@0 {
+			compatible = "samsung,s6e63m0";
+			reg = <0>;
+			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			spi-max-frequency = <1200000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_rst>;
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_ep>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+
+	status = "okay";
+
+	gp2a_shunt: current-sense-shunt {
+		compatible = "current-sense-shunt";
+		io-channels = <&adc 9>;
+		shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
+		#io-channel-cells = <0>;
+		io-channel-ranges;
+	};
+};
+
+&fimd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	status = "okay";
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@3 {
+		reg = <3>;
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo8_reg>;
+	vusb_d-supply = <&ldo3_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq>;
+		reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2s0 {
+	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
+	status = "okay";
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
+
+&pinctrl0 {
+	bt_reset: bt-reset {
+		samsung,pins = "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wlan_bt_en: wlan-bt-en {
+		samsung,pins = "gpb-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+	};
+
+	codec_ldo: codec-ldo {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	prox_i2c_pins: gp2a-i2c-pins {
+		samsung,pins = "gpg0-2", "gpg2-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wlan_gpio_rst: wlan-gpio-rst {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	bt_wake: bt-wake {
+		samsung,pins = "gpg3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	gp2a_irq: gp2a-irq {
+		samsung,pins = "gph0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_pins: pmic-dvs-pins {
+		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	pmic_irq: pmic-irq {
+		samsung,pins = "gph0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wifi_host_wake: wifi-host-wake {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	bt_host_wake: bt-host-wake {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	musb_irq: musq-irq {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	tf_detect: tf-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wifi_wake: wifi-wake {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	magnetometer_i2c_pins: yas529-i2c-pins {
+		samsung,pins = "gpj0-0", "gpj0-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ts_irq: ts-irq {
+		samsung,pins = "gpj0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	vibrator_ena: vibrator-ena {
+		samsung,pins = "gpj1-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	gp2a_power: gp2a-power {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_i2c_pins: touchkey-i2c-pins {
+		samsung,pins = "gpj3-0", "gpj3-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_vdd_ena: touchkey-vdd-ena {
+		samsung,pins = "gpj3-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	musb_i2c_pins: musb-i2c-pins {
+		samsung,pins = "gpj3-4", "gpj3-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	accel_i2c_pins: accel-i2c-pins {
+		samsung,pins = "gpj3-6", "gpj3-7";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pmic_i2c_pins: pmic-i2c-pins {
+		samsung,pins = "gpj4-0", "gpj4-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_irq: touchkey-irq {
+		samsung,pins = "gpj4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_spi_pins: spi-lcd-pins {
+		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fg_i2c_pins: fg-i2c-pins {
+		samsung,pins = "mp05-0", "mp05-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sound_i2c_pins: sound-i2c-pins {
+		samsung,pins = "mp05-2", "mp05-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	panel_rst: panel-rst {
+		samsung,pins = "mp05-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <1>;
+};
+
+&rtc {
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	max-frequency = <38400000>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
+	pinctrl-names = "default";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+	wlan@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gph2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+};
+
+&uart0 {
+	assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
+	assigned-clock-rates = <0>, <111166667>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4329-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
+			     &bt_reset &bt_wake>;
+		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gph2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	vbus-supply = <&safe1_sreg>;
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
new file mode 100644
index 000000000..b47d8300e
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+	model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
+	compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		vol-down {
+			label = "volume_down";
+			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up {
+			label = "volume_up";
+			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	headset_micbias_reg: regulator-fixed-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Headset_Micbias";
+		gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_micbias_ena>;
+	};
+
+	main_micbias_reg: regulator-fixed-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main_Micbias";
+		gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_micbias_ena>;
+	};
+
+	sound {
+		compatible = "samsung,fascinate4g-wm8994";
+
+		model = "Fascinate4G";
+
+		extcon = <&fsa9480>;
+
+		main-micbias-supply = <&main_micbias_reg>;
+		headset-micbias-supply = <&headset_micbias_reg>;
+
+		earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+		io-channels = <&adc 3>;
+		io-channel-names = "headset-detect";
+		headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
+		headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+		samsung,audio-routing =
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+
+			"RCV", "HPOUT2N",
+			"RCV", "HPOUT2P",
+
+			"LINE", "LINEOUT2N",
+			"LINE", "LINEOUT2P",
+
+			"IN1LP", "Main Mic",
+			"IN1LN", "Main Mic",
+
+			"IN1RP", "Headset Mic",
+			"IN1RN", "Headset Mic",
+
+			"Modem Out", "Modem TX",
+			"Modem RX", "Modem In",
+
+			"Bluetooth SPK", "TX",
+			"RX", "Bluetooth Mic";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_det &earpath_sel>;
+
+		cpu {
+			sound-dai = <&i2s0>, <&bt_codec>;
+		};
+
+		codec {
+			sound-dai = <&wm8994>;
+		};
+	};
+};
+
+&fg {
+	compatible = "maxim,max77836-battery";
+
+	interrupt-parent = <&gph3>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&fg_irq>;
+};
+
+&pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	headset_det: headset-det {
+		samsung,pins = "gph0-6", "gph3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	fg_irq: fg-irq {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	headset_micbias_ena: headset-micbias-ena {
+		samsung,pins = "gpj2-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	earpath_sel: earpath-sel {
+		samsung,pins = "gpj2-6";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	main_micbias_ena: main-micbias-ena {
+		samsung,pins = "gpj4-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	/* Based on vendor kernel v2.6.35.7 */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, PREV, NONE);
+		PIN_SLP(gpa0-5, PREV, NONE);
+		PIN_SLP(gpa0-6, PREV, NONE);
+		PIN_SLP(gpa0-7, PREV, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, DOWN);
+		PIN_SLP(gpd1-3, INPUT, DOWN);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, INPUT, DOWN);
+		PIN_SLP(gpg0-1, INPUT, DOWN);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, DOWN);
+		PIN_SLP(gpg0-4, INPUT, DOWN);
+		PIN_SLP(gpg0-5, INPUT, DOWN);
+		PIN_SLP(gpg0-6, INPUT, DOWN);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, PREV, UP);
+		PIN_SLP(gpg3-1, PREV, UP);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, OUT1, NONE);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, DOWN);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, INPUT, DOWN);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, OUT1, NONE);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT0, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
+};
+
+&wm8994 {
+	/* GPIO3 (BCLK2) and GPIO4 (LRCLK2) as outputs */
+	wlf,gpio-cfg = <0xa101 0x8100 0x8100 0x8100 0x8100 0xa101
+			0x0100 0x8100 0x0100 0x0100 0x0100>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
new file mode 100644
index 000000000..560f830b6
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+	model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
+	compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	nand_pwrseq: nand-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&massmemory_en>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		vol-down {
+			label = "volume_down";
+			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up {
+			label = "volume_up";
+			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home {
+			label = "home";
+			gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+	};
+
+	i2c_fmradio: i2c-gpio-8 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fm_i2c_pins>;
+
+		fmradio@10 {
+			compatible = "silabs,si470x";
+			reg = <0x10>;
+			interrupt-parent = <&gpj2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&fm_irq &fm_rst>;
+		};
+	};
+
+	micbias_reg: regulator-fixed-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS";
+		gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&micbias_reg_ena>;
+	};
+
+	sound {
+		compatible = "samsung,aries-wm8994";
+
+		model = "Aries";
+
+		extcon = <&fsa9480>;
+
+		main-micbias-supply = <&micbias_reg>;
+		headset-micbias-supply = <&micbias_reg>;
+
+		earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+		io-channels = <&adc 3>;
+		io-channel-names = "headset-detect";
+		headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>;
+		headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+		samsung,audio-routing =
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+
+			"RCV", "HPOUT2N",
+			"RCV", "HPOUT2P",
+
+			"LINE", "LINEOUT2N",
+			"LINE", "LINEOUT2P",
+
+			"IN1LP", "Main Mic",
+			"IN1LN", "Main Mic",
+
+			"IN1RP", "Headset Mic",
+			"IN1RN", "Headset Mic",
+
+			"IN2LN", "FM In",
+			"IN2RN", "FM In",
+
+			"Modem Out", "Modem TX",
+			"Modem RX", "Modem In",
+
+			"Bluetooth SPK", "TX",
+			"RX", "Bluetooth Mic";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_det &earpath_sel>;
+
+		cpu {
+			sound-dai = <&i2s0>, <&bt_codec>;
+		};
+
+		codec {
+			sound-dai = <&wm8994>;
+		};
+	};
+};
+
+&aliases {
+	i2c8 = &i2c_fmradio;
+};
+
+&pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	fm_i2c_pins: fm-i2c-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	headset_det: headset-det {
+		samsung,pins = "gph0-6", "gph3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	fm_irq: fm-irq {
+		samsung,pins = "gpj2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fm_rst: fm-rst {
+		samsung,pins = "gpj2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	earpath_sel: earpath-sel {
+		samsung,pins = "gpj2-6";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	massmemory_en: massmemory-en {
+		samsung,pins = "gpj2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	micbias_reg_ena: micbias-reg-ena {
+		samsung,pins = "gpj4-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	/* Based on CyanogenMod 3.0.101 kernel */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, OUT0, NONE);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, OUT1, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, NONE);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, OUT0, NONE);
+		PIN_SLP(gpg0-1, INPUT, NONE);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, NONE);
+		PIN_SLP(gpg0-4, INPUT, NONE);
+		PIN_SLP(gpg0-5, INPUT, NONE);
+		PIN_SLP(gpg0-6, INPUT, NONE);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, OUT1, NONE);
+		PIN_SLP(gpg3-1, OUT0, NONE);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, UP);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, OUT1, NONE);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, INPUT, DOWN);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT1, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&nand_pwrseq>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>;
+	assigned-clock-rates = <0>, <52000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
new file mode 100644
index 000000000..5c1e12d39
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Goni board.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Goni based on S5PC110";
+	compatible = "samsung,goni", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing clock on PMIC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	vtf_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_TF_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	pda_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1.8V_PDA";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	bat_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_BAT";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	tsp_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_VDD";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	wakeup-source;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key-1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key-2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key-3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key-4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key-5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		atmel,x-line = <17>;
+		atmel,y-line = <11>;
+		atmel,x-size = <800>;
+		atmel,y-size = <480>;
+		atmel,burst-length = <0x21>;
+		atmel,threshold = <0x28>;
+		atmel,orientation = <1>;
+
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	noon010pc30: sensor@30 {
+		compatible = "siliconfile,noon010pc30";
+		reg = <0x30>;
+		vddio-supply = <&ldo11_reg>;
+		vdda-supply = <&ldo13_reg>;
+		vdd_core-supply = <&ldo14_reg>;
+
+		clock-frequency = <16000000>;
+		clocks = <&camera 0>;
+		clock-names = "mclk";
+		nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+		nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			noon010pc30_ep: endpoint {
+				remote-endpoint = <&fimc0_ep>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <1>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
+	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
+	pinctrl-names = "default", "idle";
+
+	parallel-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* camera A input */
+		port@1 {
+			reg = <1>;
+			fimc0_ep: endpoint {
+				remote-endpoint = <&noon010pc30_ep>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			/* 480x800@55Hz */
+			clock-frequency = <23439570>;
+			hactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <2>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <0>;
+		};
+	};
+};
+
+&onenand {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
new file mode 100644
index 000000000..b8c5172c3
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp01: mp01 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp02: mp02 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp03: mp03 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp04: mp04 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp05: mp05 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp06: mp06 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp07: mp07 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph2: gph2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio: uart-audio {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row0: keypad-row-0 {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row1: keypad-row-1 {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row2: keypad-row-2 {
+		samsung,pins = "gph3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row3: keypad-row-3 {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row4: keypad-row-4 {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row5: keypad-row-5 {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row6: keypad-row-6 {
+		samsung,pins = "gph3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_row7: keypad-row-7 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col0: keypad-col-0 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col1: keypad-col-1 {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col2: keypad-col-2 {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col3: keypad-col-3 {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col4: keypad-col-4 {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col5: keypad-col-5 {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col6: keypad-col-6 {
+		samsung,pins = "gph2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_col7: keypad-col-7 {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpg1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpg1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpg2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpg2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpg3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpg3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpg3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpg3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gph1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gph1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+		lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_sync: lcd-sync {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
new file mode 100644
index 000000000..0c623b78a
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDC110 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkc110
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKC110 based on S5PC110";
+	compatible = "yic,smdkc110", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
new file mode 100644
index 000000000..901e7197b
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDV210 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkv210
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKV210 based on S5PV210";
+	compatible = "yic,smdkv210", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x40000000>;
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	ethernet@a8000000 {
+		compatible = "davicom,dm9000";
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
+		interrupt-parent = <&gph1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		local-mac-address = [00 00 de ad be ef];
+		davicom,no-eeprom;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	wakeup-source;
+	samsung,keypad-num-rows = <8>;
+	samsung,keypad-num-columns = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
+			<&keypad_row6>, <&keypad_row7>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
+			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
+			<&keypad_col6>, <&keypad_col7>;
+	status = "okay";
+
+	key-1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <KEY_1>;
+	};
+
+	key-2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <KEY_2>;
+	};
+
+	key-3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <KEY_3>;
+	};
+
+	key-4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <KEY_4>;
+	};
+
+	key-5 {
+		keypad,row = <0
+		>;
+		keypad,column = <7>;
+		linux,code = <KEY_5>;
+	};
+
+	key-6 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <KEY_A>;
+	};
+	key-7 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <KEY_B>;
+	};
+
+	key-8 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <KEY_C>;
+	};
+
+	key-9 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <KEY_D>;
+	};
+
+	key-10 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <KEY_E>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing {
+			/* 800x480@60Hz */
+			clock-frequency = <24373920>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <8>;
+			hback-porch = <13>;
+			hsync-len = <3>;
+			vback-porch = <7>;
+			vfront-porch = <5>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <3>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
new file mode 100644
index 000000000..e18259737
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Torbreck board.
+ *
+ * NOTE: This file is completely based on original board file for mach-torbreck
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "aESOP Torbreck based on S5PV210";
+	compatible = "aesop,torbreck", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
new file mode 100644
index 000000000..81ab9fe98
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/s5pv210.h>
+#include <dt-bindings/clock/s5pv210-audss.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		csis0 = &csis0;
+		dmc0 = &dmc0;
+		dmc1 = &dmc1;
+		fimc0 = &fimc0;
+		fimc1 = &fimc1;
+		fimc2 = &fimc2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2s0 = &i2s0;
+		i2s1 = &i2s1;
+		i2s2 = &i2s2;
+		pinctrl0 = &pinctrl0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	xxti: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xxti";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xusbxti";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		onenand: onenand@b0600000 {
+			compatible = "samsung,s5pv210-onenand";
+			reg = <0xb0600000 0x2000>,
+				<0xb0000000 0x20000>,
+				<0xb0040000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <31>;
+			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+			clock-names = "bus", "onenand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		chipid@e0000000 {
+			compatible = "samsung,s5pv210-chipid";
+			reg = <0xe0000000 0x1000>;
+		};
+
+		clocks: clock-controller@e0100000 {
+			compatible = "samsung,s5pv210-clock";
+			reg = <0xe0100000 0x10000>;
+			clock-names = "xxti", "xusbxti";
+			clocks = <&xxti>, <&xusbxti>;
+			#clock-cells = <1>;
+		};
+
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
+		};
+
+		pinctrl0: pinctrl@e0200000 {
+			compatible = "samsung,s5pv210-pinctrl";
+			reg = <0xe0200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s5pv210-wakeup-eint";
+				interrupts = <16>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		adc: adc@e1700000 {
+			compatible = "samsung,s5pv210-adc";
+			reg = <0xe1700000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <23>, <24>;
+			clocks = <&clocks CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		spi0: spi@e1300000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1300000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <15>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e1400000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <16>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		keypad: keypad@e1600000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0xe1600000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <25>;
+			clocks = <&clocks CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
+
+		i2c0: i2c@e1800000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <14>;
+			clocks = <&clocks CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e1a00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1a00000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-0 = <&i2c2_bus>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
+
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "tx", "rx", "tx-sec";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@e2100000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <17>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 13>, <&pdma1 12>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@e2a00000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2a00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <18>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 15>, <&pdma1 14>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@e2500000 {
+			compatible = "samsung,s5pc100-pwm";
+			reg = <0xe2500000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <21>, <22>, <23>, <24>, <25>;
+			clock-names = "timers";
+			clocks = <&clocks CLK_PWM>;
+			#pwm-cells = <3>;
+		};
+
+		watchdog: watchdog@e2700000 {
+			compatible = "samsung,s3c6410-wdt";
+			reg = <0xe2700000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks CLK_WDT>;
+		};
+
+		rtc: rtc@e2800000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0xe2800000 0x100>;
+			interrupt-parent = <&vic0>;
+			interrupts = <28>, <29>;
+			clocks = <&clocks CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		uart0: serial@e2900000 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900000 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
+					<&clocks SCLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@e2900400 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900400 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <11>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
+					<&clocks SCLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@e2900800 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900800 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
+					<&clocks SCLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@e2900c00 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900c00 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <13>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
+					<&clocks SCLK_UART3>;
+			status = "disabled";
+		};
+
+		sdhci0: sdhci@eb000000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb000000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@eb100000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb100000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@eb200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb200000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		sdhci3: sdhci@eb300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb300000 0x100000>;
+			interrupt-parent = <&vic3>;
+			interrupts = <2>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
+			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
+					<&clocks SCLK_MMC3>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@ec000000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0xec000000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&clocks CLK_USB_OTG>;
+			clock-names = "otg";
+			phy-names = "usb2-phy";
+			phys = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: usbphy@ec100000 {
+			compatible = "samsung,s5pv210-usb2-phy";
+			reg = <0xec100000 0x100>;
+			samsung,pmureg-phandle = <&pmu_syscon>;
+			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: ehci@ec200000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0xec200000 0x100>;
+			interrupts = <23>;
+			interrupt-parent = <&vic1>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		ohci: ohci@ec300000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0xec300000 0x100>;
+			interrupts = <23>;
+			interrupt-parent = <&vic1>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		mfc: codec@f1700000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0xf1700000 0x10000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <14>;
+			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
+			clock-names = "sclk_mfc", "mfc";
+		};
+
+		vic0: interrupt-controller@f2000000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f2100000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic2: interrupt-controller@f2200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic3: interrupt-controller@f2300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fimd: fimd@f8000000 {
+			compatible = "samsung,s5pv210-fimd";
+			interrupt-parent = <&vic2>;
+			reg = <0xf8000000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0>, <1>, <2>;
+			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
+			clock-names = "sclk_fimd", "fimd";
+			status = "disabled";
+		};
+
+		dmc0: dmc@f0000000 {
+			compatible = "samsung,s5pv210-dmc";
+			reg = <0xf0000000 0x1000>;
+		};
+
+		dmc1: dmc@f1400000 {
+			compatible = "samsung,s5pv210-dmc";
+			reg = <0xf1400000 0x1000>;
+		};
+
+		g2d: g2d@fa000000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0xfa000000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <9>;
+			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+		};
+
+		mdma1: mdma@fa200000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfa200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <18>;
+			clocks = <&clocks CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		rotator: rotator@fa300000 {
+			compatible = "samsung,s5pv210-rotator";
+			reg = <0xfa300000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <4>;
+			clocks = <&clocks CLK_ROTATOR>;
+			clock-names = "rotator";
+		};
+
+		i2c1: i2c@fab00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xfab00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <13>;
+			clocks = <&clocks CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <>;
+			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
+			clock-names = "sclk_cam0", "sclk_cam1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#clock-cells = <1>;
+			clock-output-names = "cam_a_clkout", "cam_b_clkout";
+			ranges;
+
+			csis0: csis@fa600000 {
+				compatible = "samsung,s5pv210-csis";
+				reg = <0xfa600000 0x4000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <29>;
+				clocks = <&clocks CLK_CSIS>,
+						<&clocks SCLK_CSIS>;
+				clock-names = "csis",
+						"sclk_csis";
+				bus-width = <4>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			fimc0: fimc@fb200000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb200000 0x1000>;
+				interrupts = <5>;
+				interrupt-parent = <&vic2>;
+				clocks = <&clocks CLK_FIMC0>,
+						<&clocks SCLK_FIMC0>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,min-pix-alignment = <16 8>;
+				samsung,cam-if;
+			};
+
+			fimc1: fimc@fb300000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb300000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <6>;
+				clocks = <&clocks CLK_FIMC1>,
+						<&clocks SCLK_FIMC1>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,min-pix-alignment = <1 1>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+				samsung,lcd-wb;
+			};
+
+			fimc2: fimc@fb400000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb400000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <7>;
+				clocks = <&clocks CLK_FIMC2>,
+						<&clocks SCLK_FIMC2>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <1920 8192 1280 1920>;
+				samsung,min-pix-alignment = <16 8>;
+				samsung,rotators = <0>;
+				samsung,cam-if;
+			};
+		};
+
+		jpeg_codec: jpeg-codec@fb600000 {
+			compatible = "samsung,s5pv210-jpeg";
+			reg = <0xfb600000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <8>;
+			clocks = <&clocks CLK_JPEG>;
+			clock-names = "jpeg";
+		};
+	};
+};
+
+#include "s5pv210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
new file mode 100644
index 000000000..e1e0dec8c
--- /dev/null
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: sha@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			trng: trng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "okay";
+			};
+
+			aes: aes@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes: tdes@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status="disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: rstc@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: shdwc@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtt@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: sckc@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h
new file mode 100644
index 000000000..28a2e4575
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2-pinfunc.h
@@ -0,0 +1,881 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TD0			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TD0			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD24, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
new file mode 100644
index 000000000..33f76d143
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73C000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00100000 0x2400>;
+
+		};
+
+		usb0: gadget@300000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		nfc_io: nfc-io@c0000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0xc0000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "dma_clk";
+			};
+
+			/* Place dma1 here despite its address */
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sha@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			aes@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8004000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8004000 0x4000>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(21))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(22))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
+					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
+					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			hsmc: hsmc@f8014000 {
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+				reg = <0xf8014000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@f8014070 {
+					compatible = "atmel,sama5d2-pmecc";
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x200>;
+				};
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f802c000 {
+				compatible = "atmel,sama5d2-pwm";
+				reg = <0xf802c000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				no-memory-wc;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
+			reset_controller: rstc@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: shdwc@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: sckc@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xf8048050 0x4>;
+
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc: rtc@f80480b0 {
+				compatible = "atmel,sama5d2-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
+				status = "disabled";
+			};
+
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			trng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			resistive_touch: resistive-touch {
+				compatible = "resistive-adc-touch";
+				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+				io-channel-names = "x", "y", "pressure";
+				touchscreen-min-pressure = <50000>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			};
+
+			pioBU: secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			tdes@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
+				status = "disabled";
+			};
+
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			sfrbu: sfr@fc05c000 {
+				compatible = "atmel,sama5d2-sfrbu", "syscon";
+				reg = <0xfc05c000 0x20>;
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
new file mode 100644
index 000000000..86137f8d2
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -0,0 +1,1143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D3 family SoC";
+	compatible = "atmel,sama5d3", "atmel,sama5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &uart0;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x20000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mmc0: mmc@f0000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf0000000 0x600>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f0004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf0004000 0x100>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f0008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f0010000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf0010000 0x100>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			i2c0: i2c@f0014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0014000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f0018000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf0018000 0x4000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				status = "disabled";
+			};
+
+			usart0: serial@f001c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf001c000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f0020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0020000 0x100>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f002c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf002c000 0x300>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				status = "disabled";
+			};
+
+			isi: isi@f0034000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0034000 0x4000>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
+			};
+
+			mmc1: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				clock-names = "mci_clk";
+			};
+
+			spi1: spi@f8008000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8008000 0x100>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@f800c000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf800c000 0x4000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			adc0: adc@f8018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xf8018000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					&pinctrl_adc0_ad10
+					&pinctrl_adc0_ad11
+					>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0xfff>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <10 12>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				status = "disabled";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			i2c2: i2c@f801c000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf801c000 0x4000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				status = "disabled";
+			};
+
+			usart2: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			sha@f8034000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf8034000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "sha_clk";
+			};
+
+			aes@f8038000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf8038000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "aes_clk";
+			};
+
+			tdes@f803c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf803c000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				clock-names = "tdes_clk";
+			};
+
+			trng@f8040000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xf8040000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			};
+
+			hsmc: hsmc@ffffc000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xffffc000 0x1000>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,at91sam9g45-pmecc";
+					reg = <0xffffc070 0x490>,
+					      <0xffffc500 0x100>;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "dma_clk";
+			};
+
+			dma1: dma-controller@ffffe800 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffe800 0x200>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xffffea00 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d3-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <47>;
+			};
+
+			pinctrl: pinctrl@fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfffff200 0xfffff200 0xa00>;
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
+					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
+					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
+					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
+					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
+					>;
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
+					};
+					pinctrl_adc0_ad5: adc0_ad5 {
+						atmel,pins =
+							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
+					};
+					pinctrl_adc0_ad6: adc0_ad6 {
+						atmel,pins =
+							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
+					};
+					pinctrl_adc0_ad7: adc0_ad7 {
+						atmel,pins =
+							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
+					};
+					pinctrl_adc0_ad8: adc0_ad8 {
+						atmel,pins =
+							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
+					};
+					pinctrl_adc0_ad9: adc0_ad9 {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
+					};
+					pinctrl_adc0_ad10: adc0_ad10 {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
+					};
+					pinctrl_adc0_ad11: adc0_ad11 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
+							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
+							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+					};
+				};
+
+				nand0 {
+					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
+					};
+					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
+					};
+					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
+					};
+					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
+					};
+
+					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
+						atmel,pins =
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
+					};
+					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
+					};
+					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
+					};
+					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
+					};
+					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
+						atmel,pins =
+							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
+					};
+					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
+					};
+
+					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
+					};
+					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
+					};
+					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
+					};
+					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
+					};
+
+					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
+					};
+					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
+						atmel,pins =
+							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
+					};
+					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
+					};
+					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
+						atmel,pins =
+							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
+							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
+							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
+							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
+							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
+							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
+							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
+					};
+
+					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
+							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
+							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
+					};
+
+					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
+					};
+				};
+
+
+				pioA: gpio@fffff200 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				};
+
+				pioB: gpio@fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				};
+
+				pioC: gpio@fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				};
+
+				pioD: gpio@fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				};
+
+				pioE: gpio@fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,sama5d3-pmc", "syscon";
+				reg = <0xfffffc00 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			reset_controller: rstc@fffffe00 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: shutdown-controller@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			watchdog: watchdog@fffffe40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				atmel,watchdog-type = "hardware";
+				atmel,reset-type = "all";
+				atmel,dbg-halt;
+				status = "disabled";
+			};
+
+			clk32k: sckc@fffffe50 {
+				compatible = "atmel,sama5d3-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+		};
+
+		nfc_sram: sram@200000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x200000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x2400>;
+		};
+
+		usb0: gadget@500000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00500000 0x100000
+			       0xf8030000 0x4000>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x40000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x40000000 0x10000000
+				  0x2 0x0 0x50000000 0x10000000
+				  0x3 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@70000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x70000000 0x8000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/sama5d31.dtsi
new file mode 100644
index 000000000..cbe8f275e
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
new file mode 100644
index 000000000..10fc80d6d
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/sama5d33.dtsi
new file mode 100644
index 000000000..146fd59ac
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
new file mode 100644
index 000000000..7d4ae1682
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/sama5d34.dtsi
new file mode 100644
index 000000000..132918c88
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
new file mode 100644
index 000000000..2335bf906
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/sama5d35.dtsi
new file mode 100644
index 000000000..b2ccfa77c
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
new file mode 100644
index 000000000..8edfcebb1
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi
new file mode 100644
index 000000000..5d88f9967
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d36.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
new file mode 100644
index 000000000..26950f928
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+#include "sama5d3xmb_emac.dtsi"
+#include "sama5d3xmb_gmac.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/sama5d36ek_cmp.dts
new file mode 100644
index 000000000..66695b9a3
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d36ek_cmp.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36EK-CMP";
+	compatible = "atmel,sama5d36ek-cmp", "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
new file mode 100644
index 000000000..9ac29bf3f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
new file mode 100644
index 000000000..452261088
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
new file mode 100644
index 000000000..884df7a54
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
new file mode 100644
index 000000000..308d2fc27
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,sama5d3-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
new file mode 100644
index 000000000..7141ee97e
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
new file mode 100644
index 000000000..2b18c5c2c
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
new file mode 100644
index 000000000..a3eaba995
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
new file mode 100644
index 000000000..384335635
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+		};
+
+		ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>;
+			pinctr-name = "default";
+			status = "okay";
+
+			nor: flash@0,0 {
+				compatible = "cfi-flash";
+				linux,mtd-name = "physmap-flash.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x0 0x0 0x1000000>;
+				bank-width = <2>;
+				atmel,smc-read-mode = "nrd";
+				atmel,smc-write-mode = "nwe";
+				atmel,smc-bus-width = <16>;
+				atmel,smc-ncs-rd-setup-ns = <0>;
+				atmel,smc-ncs-wr-setup-ns = <0>;
+				atmel,smc-nwe-setup-ns = <8>;
+				atmel,smc-nrd-setup-ns = <16>;
+				atmel,smc-ncs-rd-pulse-ns = <84>;
+				atmel,smc-ncs-wr-pulse-ns = <84>;
+				atmel,smc-nrd-pulse-ns = <76>;
+				atmel,smc-nwe-pulse-ns = <76>;
+				atmel,smc-nrd-cycle-ns = <107>;
+				atmel,smc-nwe-cycle-ns = <84>;
+				atmel,smc-tdf-ns = <16>;
+			};
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
new file mode 100644
index 000000000..5579c955f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			tcb0: timer@f0010000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
new file mode 100644
index 000000000..3c1c4d62f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xdm.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
new file mode 100644
index 000000000..a499de8a7
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
new file mode 100644
index 000000000..fa9e5e2a7
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5";
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				pinctrl-1 = <
+					&pinctrl_adc0_adtrg_sleep
+					&pinctrl_adc0_ad0_sleep
+					&pinctrl_adc0_ad1_sleep
+					&pinctrl_adc0_ad2_sleep
+					&pinctrl_adc0_ad3_sleep
+					&pinctrl_adc0_ad4_sleep
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				adc0 {
+					pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 {
+						atmel,pins =
+							<AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad0_sleep: adc0_ad0_1 {
+						atmel,pins =
+							<AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad1_sleep: adc0_ad1_1 {
+						atmel,pins =
+							<AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad2_sleep: adc0_ad2_1 {
+						atmel,pins =
+							<AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad3_sleep: adc0_ad3_1 {
+						atmel,pins =
+							<AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+					pinctrl_adc0_ad4_sleep: adc0_ad4_1 {
+						atmel,pins =
+							<AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>;
+					};
+				};
+
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
new file mode 100644
index 000000000..a5dd41cd9
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board
+ * Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
new file mode 100644
index 000000000..d750da38f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard
+ * Gigabit Ethernet
+ *
+ *  Copyright (C) 2016 Atmel,
+ */
+
+/ {
+	ahb {
+		apb {
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
new file mode 100644
index 000000000..e5c2c5201
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -0,0 +1,1462 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		pwm0 = &pwm0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x100000 0x2400>;
+		};
+
+		usb0: gadget@400000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x28000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		nfc_io: nfc-io@90000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x90000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d4-hlcdc";
+				reg = <0xf0000000 0x4000>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
+				clock-names = "dma_clk";
+			};
+
+			isi: isi@f0008000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0018000 {
+				compatible = "atmel,sama5d4-pmc", "syscon";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "mci_clk";
+			};
+
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8008000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8008000 0x4000>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(26))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f800c000 {
+				compatible = "atmel,sama5d3-pwm";
+				reg = <0xf800c000 0x300>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				status = "disabled";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@f8018000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8018000 0x4000>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,sama5d4-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				pinctrl-1 = <&pinctrl_i2c2_gpio>;
+				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "mci_clk";
+			};
+
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fc014000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xfc014000 0x4000>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(28))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb2: timer@fc024000 {
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xfc024000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			trng@fc030000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc030000 0x100>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "disabled";
+
+				trigger0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			aes@fc044000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes@fc04c000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			sha@fc050000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xfc050000 0x100>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			hsmc: smc@fc05c000 {
+				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+				reg = <0xfc05c000 0x1000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@ffffc070 {
+					compatible = "atmel,sama5d4-pmecc";
+					reg = <0xfc05c070 0x490>,
+					      <0xfc05c500 0x100>;
+				};
+			};
+
+			reset_controller: rstc@fc068600 {
+				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: shdwc@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@fc068640 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xfc068640 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: sckc@fc068650 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xfc068650 0x4>;
+				#clock-cells = <0>;
+				clocks = <&slow_xtal>;
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,sama5d4-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+
+			pinctrl: pinctrl@fc06a000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+
+				pioA: gpio@fc06a000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06a000 0x100>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				};
+
+				pioB: gpio@fc06b000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06b000 0x100>;
+					interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				};
+
+				pioC: gpio@fc06c000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06c000 0x100>;
+					interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				};
+
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				};
+
+				pioE: gpio@fc06d000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06d000 0x100>;
+					interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				};
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with D14 and TDI */
+							 AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;		/* conflicts with D15 and TDO */
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nand_addr: ebi-addr-1 {
+						atmel,pins =
+							<AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs0: ebi-cs0-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs1: ebi-cs1-0 {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs2: ebi-cs2-0 {
+						atmel,pins =
+							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_cs3: ebi-cs3-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
+						atmel,pins =
+							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwait: ebi-nwait-0 {
+						atmel,pins =
+							<AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_i2c0_gpio: i2c0-gpio {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c1 {
+					pinctrl_i2c1: i2c1-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* TWD1, conflicts with UART0 RX and DIBP */
+							 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* TWCK1, conflicts with UART0 TX and DIBN */
+					};
+
+					pinctrl_i2c1_gpio: i2c1-gpio {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+
+					pinctrl_i2c2_gpio: i2c2-gpio {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
+
+				isi {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D0 */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D1 */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D2 */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D3 */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D4 */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D5 */
+							 AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D6 */
+							 AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* ISI_D7 */
+							 AT91_PIOB  1 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_PCK, conflict with G0_RXCK */
+							 AT91_PIOB  3 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_VSYNC */
+							 AT91_PIOB  4 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_HSYNC */
+					};
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
+							 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
+					};
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE	/* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
+							 AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb777: lcd-rgb-3 {
+						atmel,pins =
+							 /* LCDDAT0 conflicts with TMS */
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 /* LCDDAT8 conflicts with TCK */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 /* LCDDAT16 conflicts with NTRST */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+					pinctrl_lcd_rgb888: lcd-rgb-4 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
+							>;
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx {
+						atmel,pins =
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK0 */
+							 AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF0 */
+							 AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD0 */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx {
+						atmel,pins =
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK0 */
+							 AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF0 */
+							 AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD0 */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TK1 */
+							 AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TF1 */
+							 AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* TD1 */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx {
+						atmel,pins =
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RK1 */
+							 AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* RF1 */
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* RD1 */
+					};
+				};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE		/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644
index 000000000..3cc9a2391
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "H836ASDJ", "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller@10130000 {
+			compatible = "snps,dw-apb-ictl";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer@16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer@16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@1600d000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600d000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial@1600c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600c000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
new file mode 100644
index 000000000..5a8d92a06
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the KZM-A9-GT board
+ *
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+/dts-v1/;
+#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "KZM-A9-GT";
+	compatible = "renesas,kzm9g", "renesas,sh73a0";
+
+	aliases {
+		serial0 = &scifa4;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_dvfs>;
+			operating-points = <1196000 1315000>,	/* kHz  uV */
+					   < 598000 1175000>,
+					   < 398667 1065000>;
+			voltage-tolerance = <1>; /* 1% */
+		};
+	};
+
+	chosen {
+		bootargs = "root=/dev/nfs ip=on ignore_loglevel rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vmmc_sdhi0: regulator-vmmc-sdhi0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator-vmmc-sdhi2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+			label = "LED4";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		back-key {
+			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW3";
+		};
+
+		right-key {
+			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "SW2-R";
+		};
+
+		left-key {
+			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "SW2-L";
+		};
+
+		enter-key {
+			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "SW2-P";
+		};
+
+		up-key {
+			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "SW2-U";
+		};
+
+		down-key {
+			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "SW2-D";
+		};
+
+		home-key {
+			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW1";
+			wakeup-source;
+		};
+
+		wakeup-key {
+			gpios = <&pfc 159 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			label = "NMI";
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&ak4648>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&bsc {
+	ethernet@10000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x10000000 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	compass@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	ak4648: codec@12 {
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+		#sound-dai-cells = <0>;
+	};
+
+	accelerometer@1d {
+		compatible = "adi,adxl345";
+		reg = <0x1d>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+			     <3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rtc@32 {
+		compatible = "ricoh,r2025sd";
+		reg = <0x32>;
+	};
+
+	as3711@40 {
+		compatible = "ams,as3711";
+		reg = <0x40>;
+
+		regulators {
+			vdd_dvfs: sd1 {
+				regulator-name = "1.315V CPU";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd2 {
+				regulator-name = "1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd4 {
+				regulator-name = "1.215V";
+				regulator-min-microvolt = <1215000>;
+				regulator-max-microvolt = <1235000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2 {
+				regulator-name = "2.8V CPU";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo3 {
+				regulator-name = "3.0V CPU";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo4 {
+				regulator-name = "2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo5 {
+				regulator-name = "2.8V #2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo7 {
+				regulator-name = "1.15V CPU";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo8 {
+				regulator-name = "1.15V CPU #2";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8575: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&irqpin2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	vmmc-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		groups = "i2c3_1";
+		function = "i2c3";
+	};
+
+	mmcif_pins: mmc {
+		mux {
+			groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			function = "mmc0";
+		};
+		cfg {
+			groups = "mmc0_data8_0";
+			pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: scifa4 {
+		groups = "scifa4_data", "scifa4_ctrl";
+		function = "scifa4";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+	};
+
+	fsia_pins: sounda {
+		groups = "fsia_mclk_in", "fsia_sclk_in",
+			 "fsia_data_in", "fsia_data_out";
+		function = "fsia";
+	};
+};
+
+&scifa4 {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
new file mode 100644
index 000000000..30c67acc4
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the SH-Mobile AG5 (R8A73A00/SH73A0) SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ */
+
+#include <dt-bindings/clock/sh73a0-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,sh73a0";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <1196000000>;
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
+			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <1196000000>;
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
+			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&periph_clk>;
+	};
+
+	timer@f0000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xf0000600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&periph_clk>;
+	};
+
+	gic: interrupt-controller@f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+
+	L2: cache-controller@f0100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	sbsc2: memory-controller@fb400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfb400000 0x400>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc1>;
+	};
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	cmt1: timer@e6138000 {
+		compatible = "renesas,sh73a0-cmt1";
+		reg = <0xe6138000 0x200>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	irqpin0: interrupt-controller@e6900000 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+		power-domains = <&pd_a4s>;
+		control-parent;
+	};
+
+	irqpin1: interrupt-controller@e6900004 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+		power-domains = <&pd_a4s>;
+		control-parent;
+	};
+
+	irqpin2: interrupt-controller@e6900008 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+		power-domains = <&pd_a4s>;
+		control-parent;
+	};
+
+	irqpin3: interrupt-controller@e690000c {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
+		power-domains = <&pd_a4s>;
+		control-parent;
+	};
+
+	i2c0: i2c@e6820000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6820000 0x425>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6822000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6822000 0x425>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6824000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6824000 0x425>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6826000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6826000 0x425>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6828000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6828000 0x425>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
+		power-domains = <&pd_c5>;
+		status = "disabled";
+	};
+
+	mmcif: mmc@e6bd0000 {
+		compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
+		power-domains = <&pd_a3sp>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e20000 0x0064>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e10000 0x0064>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e00000 0x0064>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6c90000 0x0064>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sdhi0: mmc@ee100000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee100000 0x100>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
+	sdhi1: mmc@ee120000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee120000 0x100>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
+		power-domains = <&pd_a3sp>;
+		disable-wp;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: mmc@ee140000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee140000 0x100>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
+		power-domains = <&pd_a3sp>;
+		disable-wp;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c40000 0x100>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c50000 0x100>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c60000 0x100>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c70000 0x100>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c80000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c80000 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa5: serial@e6cb0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cb0000 0x100>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa6: serial@e6cc0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cc0000 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa7: serial@e6cd0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cd0000 0x100>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb: serial@e6c30000 {
+		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
+		reg = <0xe6c30000 0x100>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
+		clock-names = "fck";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	pfc: pinctrl@e6050000 {
+		compatible = "renesas,pfc-sh73a0";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges =
+			<&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>,
+			<&pfc 288 288 22>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+		power-domains = <&pd_c5>;
+	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-sh73a0", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_c4: c4@0 {
+					reg = <0>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_d4: d4@1 {
+					reg = <1>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4bc0: a4bc0@4 {
+					reg = <4>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4bc1: a4bc1@5 {
+					reg = <5>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4lc0: a4lc0@6 {
+					reg = <6>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4lc1: a4lc1@7 {
+					reg = <7>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4mp: a4mp@8 {
+					reg = <8>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3mp: a3mp@9 {
+						reg = <9>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3vc: a3vc@10 {
+						reg = <10>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4rm: a4rm@12 {
+					reg = <12>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3r: a3r@13 {
+						reg = <13>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <0>;
+
+						pd_a2rv: a2rv@14 {
+							reg = <14>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				pd_a4s: a4s@16 {
+					reg = <16>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@17 {
+						reg = <17>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sg: a3sg@18 {
+						reg = <18>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sm: a3sm@19 {
+						reg = <19>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <0>;
+
+						pd_a2sl: a2sl@20 {
+							reg = <20>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	sh_fsi2: sound@ec230000 {
+		#sound-dai-cells = <1>;
+		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
+		reg = <0xec230000 0x400>;
+		interrupts = <GIC_SPI 146 0x4>;
+		clocks = <&mstp3_clks SH73A0_CLK_FSI>;
+		power-domains = <&pd_a4mp>;
+		status = "disabled";
+	};
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x20000000>;
+		reg = <0xfec10000 0x400>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_a4s>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clocks */
+		extalr_clk: extalr {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		extal1_clk: extal1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+		extal2_clk: extal2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+		};
+		extcki_clk: extcki {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
+		};
+		fsiack_clk: fsiack {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
+		};
+		fsibck_clk: fsibck {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,sh73a0-cpg-clocks";
+			reg = <0xe6150000 0x10000>;
+			clocks = <&extal1_clk>, <&extal2_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll2",
+					     "pll3", "dsi0phy", "dsi1phy",
+					     "zg", "m3", "b", "m1", "m2",
+					     "z", "zx", "hp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		vclk1_clk: vclk1@e6150008 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150008 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		vclk2_clk: vclk2@e615000c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615000c 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		vclk3_clk: vclk3@e615001c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615001c 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extcki_clk>, <&extal2_clk>, <&main_div2_clk>,
+				 <&extalr_clk>, <&cpg_clocks SH73A0_CLK_MAIN>,
+				 <0>;
+			#clock-cells = <0>;
+		};
+		zb_clk: zb_clk@e6150010 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150010 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "zb";
+		};
+		flctl_clk: flctlck@e6150014 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150014 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+		};
+		sdhi0_clk: sdhi0ck@e6150074 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150074 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		sdhi1_clk: sdhi1ck@e6150078 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150078 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		sdhi2_clk: sdhi2ck@e615007c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615007c 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div13_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		fsia_clk: fsia@e6150018 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150018 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&fsiack_clk>, <&fsiack_clk>;
+			#clock-cells = <0>;
+		};
+		fsib_clk: fsib@e6150090 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150090 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&fsibck_clk>, <&fsibck_clk>;
+			#clock-cells = <0>;
+		};
+		sub_clk: sub@e6150080 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150080 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		spua_clk: spua@e6150084 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150084 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		spuv_clk: spuv@e6150094 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150094 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&extal2_clk>, <&extal2_clk>;
+			#clock-cells = <0>;
+		};
+		msu_clk: msu@e6150088 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150088 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+		};
+		hsi_clk: hsi@e615008c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615008c 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&pll1_div7_clk>, <0>;
+			#clock-cells = <0>;
+		};
+		mfg1_clk: mfg1@e6150098 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150098 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+		};
+		mfg2_clk: mfg2@e615009c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615009c 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+		};
+		dsit_clk: dsit@e6150060 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150060 4>;
+			clocks = <&pll1_div2_clk>, <0>,
+				 <&cpg_clocks SH73A0_CLK_PLL2>, <0>;
+			#clock-cells = <0>;
+		};
+		dsi0p_clk: dsi0pck@e6150064 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150064 4>;
+			clocks = <&pll1_div2_clk>, <&cpg_clocks SH73A0_CLK_PLL2>,
+				 <&cpg_clocks SH73A0_CLK_MAIN>, <&extal2_clk>,
+				 <&extcki_clk>, <0>, <0>, <0>;
+			#clock-cells = <0>;
+		};
+
+		/* Fixed factor clocks */
+		main_div2_clk: main_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_MAIN>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		pll1_div2_clk: pll1_div2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+		pll1_div7_clk: pll1_div7 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <7>;
+			clock-mult = <1>;
+		};
+		pll1_div13_clk: pll1_div13 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <13>;
+			clock-mult = <1>;
+		};
+		periph_clk: periph {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150130 4>, <0xe6150030 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0
+			>;
+			clock-output-names =
+				"iic2", "msiof0";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150134 4>, <0xe6150038 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&sub_clk>, <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_ZG>,
+				 <&cpg_clocks SH73A0_CLK_B>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_CEU1 SH73A0_CLK_CSI2_RX1
+				SH73A0_CLK_CEU0 SH73A0_CLK_CSI2_RX0
+				SH73A0_CLK_TMU0	SH73A0_CLK_DSITX0
+				SH73A0_CLK_IIC0 SH73A0_CLK_SGX
+				SH73A0_CLK_LCDC0
+			>;
+			clock-output-names =
+				"ceu1", "csi2_rx1", "ceu0", "csi2_rx0",
+				"tmu0", "dsitx0", "iic0", "sgx", "lcdc0";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150138 4>, <0xe6150040 4>;
+			clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
+				SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3
+				SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5
+				SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2
+				SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1
+				SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3
+				SH73A0_CLK_SCIFA4
+			>;
+			clock-output-names =
+				"scifa7", "sy_dmac", "mp_dmac", "msiof3",
+				"msiof1", "scifa5", "scifb", "msiof2",
+				"scifa0", "scifa1", "scifa2", "scifa3",
+				"scifa4";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe615013c 4>, <0xe6150048 4>;
+			clocks = <&sub_clk>, <&extalr_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&flctl_clk>,
+				 <&sdhi0_clk>, <&sdhi1_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sdhi2_clk>,
+				 <&main_div2_clk>, <&main_div2_clk>,
+				 <&main_div2_clk>, <&main_div2_clk>,
+				 <&main_div2_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_SCIFA6 SH73A0_CLK_CMT1
+				SH73A0_CLK_FSI SH73A0_CLK_IRDA
+				SH73A0_CLK_IIC1 SH73A0_CLK_USB SH73A0_CLK_FLCTL
+				SH73A0_CLK_SDHI0 SH73A0_CLK_SDHI1
+				SH73A0_CLK_MMCIF0 SH73A0_CLK_SDHI2
+				SH73A0_CLK_TPU0 SH73A0_CLK_TPU1
+				SH73A0_CLK_TPU2 SH73A0_CLK_TPU3
+				SH73A0_CLK_TPU4
+			>;
+			clock-output-names =
+				"scifa6", "cmt1", "fsi", "irda", "iic1",
+				"usb", "flctl", "sdhi0", "sdhi1", "mmcif0", "sdhi2",
+				"tpu0", "tpu1", "tpu2", "tpu3", "tpu4";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150140 4>, <0xe615004c 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_IIC3 SH73A0_CLK_IIC4
+				SH73A0_CLK_KEYSC
+			>;
+			clock-output-names =
+				"iic3", "iic4", "keysc";
+		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150144 4>, <0xe615003c 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_INTCA0
+			>;
+			clock-output-names =
+				"intca0";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
new file mode 100644
index 000000000..0b021eef0
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera <www.altera.com>
+ */
+
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu: pmu@ff111000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 176 4>, <0 177 4>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		reg = <0xff111000 0x1000>,
+		      <0xff113000 0x1000>;
+	};
+
+	intc: intc@fffed000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffed000 0x1000>,
+		      <0xfffec100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffe01000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffe01000 0x1000>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>;
+				reset-names = "dma";
+			};
+		};
+
+		base_fpga_region {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpgamgr0>;
+
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+		};
+
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			resets = <&rst CAN0_RESET>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			resets = <&rst CAN1_RESET>;
+			status = "disabled";
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc2: osc2 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_periph_ref_clk: f2s_periph_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+						reg = <0x40>;
+
+						mpuclk: mpuclk@48 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe0 0 9>;
+							reg = <0x48>;
+						};
+
+						mainclk: mainclk@4c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe4 0 9>;
+							reg = <0x4C>;
+						};
+
+						dbg_base_clk: dbg_base_clk@50 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>, <&osc1>;
+							div-reg = <0xe8 0 9>;
+							reg = <0x50>;
+						};
+
+						main_qspi_clk: main_qspi_clk@54 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x54>;
+						};
+
+						main_nand_sdmmc_clk: main_nand_sdmmc_clk@58 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x58>;
+						};
+
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk@5c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x5C>;
+						};
+					};
+
+					periph_pll: periph_pll@80 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+						reg = <0x80>;
+
+						emac0_clk: emac0_clk@88 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x88>;
+						};
+
+						emac1_clk: emac1_clk@8c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x8C>;
+						};
+
+						per_qspi_clk: per_qsi_clk@90 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x90>;
+						};
+
+						per_nand_mmc_clk: per_nand_mmc_clk@94 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x94>;
+						};
+
+						per_base_clk: per_base_clk@98 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x98>;
+						};
+
+						h2f_usr1_clk: h2f_usr1_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					sdram_pll: sdram_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+						reg = <0xC0>;
+
+						ddr_dqs_clk: ddr_dqs_clk@c8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xC8>;
+						};
+
+						ddr_2x_dqs_clk: ddr_2x_dqs_clk@cc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xCC>;
+						};
+
+						ddr_dq_clk: ddr_dq_clk@d0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD0>;
+						};
+
+						h2f_usr2_clk: h2f_usr2_clk@d4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD4>;
+						};
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
+					};
+
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
+					};
+
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mainclk>;
+						fixed-divider = <1>;
+					};
+
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
+					};
+
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&l3_mp_clk>;
+						div-reg = <0x64 2 2>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
+					};
+
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
+					};
+
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_at_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
+					};
+
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
+					};
+
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
+					};
+
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
+					};
+
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
+					};
+
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
+					};
+
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
+					};
+
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
+					};
+
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
+					};
+
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
+					};
+
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
+					};
+
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
+						clk-phase = <0 135>;
+					};
+
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
+					};
+
+					ddr_dqs_clk_gate: ddr_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dqs_clk>;
+						clk-gate = <0xd8 0>;
+					};
+
+					ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_2x_dqs_clk>;
+						clk-gate = <0xd8 1>;
+					};
+
+					ddr_dq_clk_gate: ddr_dq_clk_gate {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&ddr_dq_clk>;
+						clk-gate = <0xd8 2>;
+					};
+
+					h2f_user2_clk: h2f_user2_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr2_clk>;
+						clk-gate = <0xd8 3>;
+					};
+
+				};
+		};
+
+		fpga_bridge0: fpga_bridge@ff400000 {
+			compatible = "altr,socfpga-lwhps2fpga-bridge";
+			reg = <0xff400000 0x100000>;
+			resets = <&rst LWHPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge1: fpga_bridge@ff500000 {
+			compatible = "altr,socfpga-hps2fpga-bridge";
+			reg = <0xff500000 0x10000>;
+			resets = <&rst HPS2FPGA_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge2: fpga-bridge@ff600000 {
+			compatible = "altr,socfpga-fpga2hps-bridge";
+			reg = <0xff600000 0x100000>;
+			resets = <&rst FPGA2HPS_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge3: fpga-bridge@ffc25080 {
+			compatible = "altr,socfpga-fpga2sdram-bridge";
+			reg = <0xffc25080 0x4>;
+			status = "disabled";
+		};
+
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x4>;
+			interrupts = <0 175 4>;
+		};
+
+		gmac0: ethernet@ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_0_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff702000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+			reg = <0xff702000 0x2000>;
+			interrupts = <0 120 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac_1_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio1: gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio2: gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
+		};
+
+		L2: cache-controller@fffef000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffef000 0x1000>;
+			interrupts = <0 38 0x04>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <2 1 1>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <0>;
+			arm,prefetch-offset = <7>;
+		};
+
+		l3regs@0xff800000 {
+			compatible = "altr,l3regs", "syscon";
+			reg = <0xff800000 0x1000>;
+		};
+
+		mmc: dwmmc0@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			status = "disabled";
+		};
+
+		nand0: nand@ff900000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xff900000 0x100000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0x0 0x90 0x4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffff0000 {
+			compatible = "mmio-sram";
+			reg = <0xffff0000 0x10000>;
+		};
+
+		qspi: spi@ff705000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff705000 0x1000>,
+			      <0xffa00000 0x1000>;
+			interrupts = <0 151 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc25000 0x1000>;
+			resets = <&rst SDR_RESET>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
+		spi0: spi@fff00000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 154 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		spi1: spi@fff01000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff01000 0x1000>;
+			interrupts = <0 155 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
+		/* Local timer */
+		timer@fffec600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfffec600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc08000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 167 4>;
+			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc09000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 168 4>;
+			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 169 4>;
+			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd01000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 170 4>;
+			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+			resets = <&rst OSC1TIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x1000>;
+			interrupts = <0 162 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 28>,
+			       <&pdma 29>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
+		};
+
+		uart1: serial1@ffc03000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc03000 0x1000>;
+			interrupts = <0 163 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			dmas = <&pdma 30>,
+			       <&pdma 31>;
+			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
new file mode 100644
index 000000000..0013ec346
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -0,0 +1,903 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/altr,rst-mgr-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "altr,socfpga-a10-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc@ffffd000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xffffd000 0x1000>,
+		      <0xffffc100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffda1000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffda1000 0x1000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 84 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 86 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+				reset-names = "dma", "dma-ocp";
+			};
+		};
+
+		base_fpga_region {
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					cb_intosc_ls_clk: cb_intosc_ls_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_free_clk: f2s_free_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll@40 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x40>;
+
+						main_mpu_base_clk: main_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x140 0 11>;
+						};
+
+						main_noc_base_clk: main_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x144 0 11>;
+						};
+
+						main_emaca_clk: main_emaca_clk@68 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x68>;
+						};
+
+						main_emacb_clk: main_emacb_clk@6c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x6C>;
+						};
+
+						main_emac_ptp_clk: main_emac_ptp_clk@70 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x70>;
+						};
+
+						main_gpio_db_clk: main_gpio_db_clk@74 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x74>;
+						};
+
+						main_sdmmc_clk: main_sdmmc_clk@78 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk"
+;
+							clocks = <&main_pll>;
+							reg = <0x78>;
+						};
+
+						main_s2f_usr0_clk: main_s2f_usr0_clk@7c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x7C>;
+						};
+
+						main_s2f_usr1_clk: main_s2f_usr1_clk@80 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x80>;
+						};
+
+						main_hmc_pll_ref_clk: main_hmc_pll_ref_clk@84 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x84>;
+						};
+
+						main_periph_ref_clk: main_periph_ref_clk@9c {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					periph_pll: periph_pll@c0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+						reg = <0xC0>;
+
+						peri_mpu_base_clk: peri_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x140 16 11>;
+						};
+
+						peri_noc_base_clk: peri_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x144 16 11>;
+						};
+
+						peri_emaca_clk: peri_emaca_clk@e8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xE8>;
+						};
+
+						peri_emacb_clk: peri_emacb_clk@ec {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xEC>;
+						};
+
+						peri_emac_ptp_clk: peri_emac_ptp_clk@f0 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF0>;
+						};
+
+						peri_gpio_db_clk: peri_gpio_db_clk@f4 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF4>;
+						};
+
+						peri_sdmmc_clk: peri_sdmmc_clk@f8 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF8>;
+						};
+
+						peri_s2f_usr0_clk: peri_s2f_usr0_clk@fc {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xFC>;
+						};
+
+						peri_s2f_usr1_clk: peri_s2f_usr1_clk@100 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x100>;
+						};
+
+						peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk@104 {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x104>;
+						};
+					};
+
+					mpu_free_clk: mpu_free_clk@60 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x60>;
+					};
+
+					noc_free_clk: noc_free_clk@64 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x64>;
+					};
+
+					s2f_user1_free_clk: s2f_user1_free_clk@104 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x104>;
+					};
+
+					sdmmc_free_clk: sdmmc_free_clk@f8 {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						fixed-divider = <4>;
+						reg = <0xF8>;
+					};
+
+					l4_sys_free_clk: l4_sys_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&noc_free_clk>;
+						fixed-divider = <4>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 0 2>;
+						clk-gate = <0x48 1>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 8 2>;
+						clk-gate = <0x48 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 16 2>;
+						clk-gate = <0x48 3>;
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&mpu_free_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0x48 0>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&sdmmc_free_clk>;
+						clk-gate = <0xC8 5>;
+						clk-phase = <0 135>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 11>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_ecc_clk: nand_ecc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&nand_x_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0xC8 10>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 9>;
+					};
+
+					usb_clk: usb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 8>;
+					};
+
+					s2f_usr1_clk: s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&peri_s2f_usr1_clk>;
+						clk-gate = <0xC8 6>;
+					};
+				};
+		};
+
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+		        reg = <0xff802000 0x2000>;
+			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>;
+			clock-names = "stmmaceth", "ptp_ref";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
+			snps,axi-config = <&socfpga_axi_setup>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02900 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02a00 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02b00 0x100>;
+			resets = <&rst GPIO2_RESET>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		fpga_mgr: fpga-mgr@ffd03000 {
+			compatible = "altr,socfpga-a10-fpga-mgr";
+			reg = <0xffd03000 0x100
+			       0xffcfe400 0x20>;
+			clocks = <&l4_mp_clk>;
+			resets = <&rst FPGAMGR_RESET>;
+			reset-names = "fpgamgr";
+		};
+
+		i2c0: i2c@ffc02200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02200 0x100>;
+			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C0_RESET>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02300 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C1_RESET>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02400 0x100>;
+			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C2_RESET>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02500 0x100>;
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C3_RESET>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02600 0x100>;
+			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst I2C4_RESET>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x100>;
+			interrupts = <0 102 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			tx-dma-channel = <&pdma 16>;
+			rx-dma-channel = <&pdma 17>;
+			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			status = "disabled";
+		};
+
+		sdr: sdr@ffcfb100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffcfb100 0x80>;
+		};
+
+		L2: cache-controller@fffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffff000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,shared-override;
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
+			status = "disabled";
+		};
+
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x72000>,
+			      <0xffb80000 0x10000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 99 4>;
+			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		eccmgr: eccmgr {
+			compatible = "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-a10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+					     <49 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			l2-ecc@ffd06010 {
+				compatible = "altr,socfpga-a10-l2-ecc";
+				reg = <0xffd06010 0x4>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+					     <32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+					     <33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: spi@ff809000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff809000 0x100>,
+			      <0xffa00000 0x100000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
+			reset-names = "qspi", "qspi-ocp";
+			status = "disabled";
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x100>;
+			altr,modrst-offset = <0x20>;
+		};
+
+		scu: snoop-control-unit@ffffc000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xffffc000 0x100>;
+		};
+
+		sysmgr: sysmgr@ffd06000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
+		};
+
+		/* Local timer */
+		timer@ffffc600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xffffc600 0x100>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc02700 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer1: timer1@ffc02800 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+			resets = <&rst SPTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER0_RESET>;
+			reset-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
+			resets = <&rst L4SYSTIMER1_RESET>;
+			reset-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB0_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
+			resets = <&rst USB1_RESET>;
+			reset-names = "dwc2";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD0_RESET>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
+			resets = <&rst L4WD1_RESET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
new file mode 100644
index 000000000..7edebe20e
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	a10leds {
+		compatible = "gpio-leds";
+
+		a10sr_led0 {
+			label = "a10sr-led0";
+			gpios = <&a10sr_gpio 0 1>;
+		};
+
+		a10sr_led1 {
+			label = "a10sr-led1";
+			gpios = <&a10sr_gpio 1 1>;
+		};
+
+		a10sr_led2 {
+			label = "a10sr-led2";
+			gpios = <&a10sr_gpio 2 1>;
+		};
+
+		a10sr_led3 {
+			label = "a10sr-led3";
+			gpios = <&a10sr_gpio 3 1>;
+		};
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	/*
+	 * These skews assume the user's FPGA design is adding 600ps of delay
+	 * for TX_CLK on Arria 10.
+	 *
+	 * All skews are offset since hardware skew values for the ksz9031
+	 * range from a negative skew to a positive skew.
+	 * See the micrel-ksz90x1.txt Documentation file for details.
+	 */
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+	max-frame-size = <3800>;
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		/* low-level active IRQ at GPIO1_5 */
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		a10sr_rst: reset-controller {
+			compatible = "altr,a10sr-reset";
+			#reset-cells = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&ref_033v>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+
+	ltc@5c {
+		compatible = "ltc2977";
+		reg = <0x5c>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
new file mode 100644
index 000000000..9aa897b79
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Altera Corporation. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Boot and fpga data";
+			reg = <0x0 0x02000000>;
+		};
+		partition@1c00000 {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x02000000 0x06000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
new file mode 100644
index 000000000..2a7455224
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Intel. All rights reserved.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <3>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			label = "Boot and fpga data";
+			reg = <0x0 0x2720000>;
+		};
+
+		partition@qspi-rootfs {
+			label = "Root Filesystem - JFFS2";
+			reg = <0x2720000 0x58E0000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
new file mode 100644
index 000000000..64dc0799f
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga_arria10_socdk.dtsi"
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
new file mode 100644
index 000000000..22dbf07af
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
new file mode 100644
index 000000000..1b02d4649
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&porta 0 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 11 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&porta 17 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&porta 18 1>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
new file mode 100644
index 000000000..319a71e41
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
new file mode 100644
index 000000000..f6561766d
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Chameleon96
+ *
+ * Copyright (c) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Novetech Chameleon96";
+	compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x20000000>; /* 512MB */
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&porta 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&porta 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&porta 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&portb 3 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&spi0 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&spi1 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&uart0 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&uart1 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
new file mode 100644
index 000000000..67076e1b1
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE-0(Atlas)";
+	compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 24 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+
+	max-frame-size = <3800>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	adxl345: adxl345@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 000000000..bd92806ff
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Aries/DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
+};
+
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 000000000..ceaec2977
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "Aries/DENX MCV EVK";
+	compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
new file mode 100644
index 000000000..51bb43678
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 15 1>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 14 1>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 13 1>;
+		};
+
+		hps3 {
+			label = "hps_led3";
+			gpios = <&portb 12 1>;
+		};
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <5000>;
+	i2c-scl-falling-time-ns = <5000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q00@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;	/* chip select */
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@qspi-boot {
+			/* 8MB for raw data. */
+			label = "Flash 0 Raw Data";
+			reg = <0x0 0x800000>;
+		};
+
+		partition@qspi-rootfs {
+			/* 120MB for jffs2 data. */
+			label = "Flash 0 jffs2 Filesystem";
+			reg = <0x800000 0x7800000>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
new file mode 100644
index 000000000..cae9ddd5e
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:blue:led0";
+			gpios = <&portb 24 0>;	/* HPS_GPIO53 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led1 {
+			label = "hps:blue:led1";
+			gpios = <&portb 25 0>;	/* HPS_GPIO54 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led2 {
+			label = "hps:blue:led2";
+			gpios = <&portb 26 0>;	/* HPS_GPIO55 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		hps_led3 {
+			label = "hps:blue:led3";
+			gpios = <&portb 27 0>;	/* HPS_GPIO56 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_sw0 {
+			label = "hps_sw0";
+			gpios = <&portc 20 0>;	/* HPS_GPI7 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;	/* SW_LID */
+		};
+
+		hps_sw1 {
+			label = "hps_sw1";
+			gpios = <&portc 19 0>;	/* HPS_GPI6 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x5>;	/* SW_DOCK */
+		};
+
+		hps_sw2 {
+			label = "hps_sw2";
+			gpios = <&portc 18 0>;	/* HPS_GPI5 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xa>;	/* SW_KEYPAD_SLIDE */
+		};
+
+		hps_sw3 {
+			label = "hps_sw3";
+			gpios = <&portc 17 0>;	/* HPS_GPI4 */
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0xc>;	/* SW_ROTATE_LOCK */
+		};
+
+		hps_hkey0 {
+			label = "hps_hkey0";
+			gpios = <&portc 21 1>;	/* HPS_GPI8 */
+			linux,code = <187>;	/* KEY_F17 */
+		};
+
+		hps_hkey1 {
+			label = "hps_hkey1";
+			gpios = <&portc 22 1>;	/* HPS_GPI9 */
+			linux,code = <188>;	/* KEY_F18 */
+		};
+
+		hps_hkey2 {
+			label = "hps_hkey2";
+			gpios = <&portc 23 1>;	/* HPS_GPI10 */
+			linux,code = <189>;	/* KEY_F19 */
+		};
+
+		hps_hkey3 {
+			label = "hps_hkey3";
+			gpios = <&portc 24 1>;	/* HPS_GPI11 */
+			linux,code = <190>;	/* KEY_F20 */
+		};
+	};
+
+	regulator_3_3v: vcc3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accel1: accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+
+		interrupt-parent = <&portc>;
+		interrupts = <3 2>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
new file mode 100644
index 000000000..ca18b959e
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	leds: gpio-leds {
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&leds {
+	compatible = "gpio-leds";
+
+	led0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
new file mode 100644
index 000000000..3f7aa7bf0
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board";
+	compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		hps_led0 {
+			label = "hps:green:led0";
+			gpios = <&portb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led1 {
+			label = "hps:green:led1";
+			gpios = <&portb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led2 {
+			label = "hps:green:led2";
+			gpios = <&portb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		hps_led3 {
+			label = "hps:green:led3";
+			gpios = <&portb 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: n25q512a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q512a", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
new file mode 100644
index 000000000..25874e1b9
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "samtec VIN|ING FPGA";
+	compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/*
+		 * This allow the ethaddr uboot environment variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+		ethernet1 = &gmac0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hps_temp0 {
+			label = "BTN_0";			/* TEMP_OS */
+			gpios = <&portc 18 GPIO_ACTIVE_LOW>;	/* HPS_GPI5 */
+			linux,code = <BTN_0>;
+		};
+
+		hps_hkey0 {
+			label = "GP_SWITCH";			/* GP_SWITCH */
+			gpios = <&portc 19 GPIO_ACTIVE_LOW>;	/* HPS_GPI6 */
+			linux,code = <BTN_1>;
+		};
+
+		hps_hkey1 {
+			label = "RESET_SWITCH";			/* RESET_SWITCH */
+			gpios = <&portc 20 GPIO_ACTIVE_LOW>;	/* HPS_GPI7 */
+			linux,code = <BTN_2>;
+		};
+
+		hps_hkey2 {
+			label = "POWER_DOWN";			/* POWER_DOWN */
+			gpios = <&portc 4 GPIO_ACTIVE_LOW>;	/* HPS_GPIO62 */
+			linux,code = <KEY_POWER>;
+		};
+
+		hps_hkey3 {
+			label = "SENSE";			/* SENSE */
+			gpios = <&porta 9 GPIO_ACTIVE_LOW>;	/* HPS_GPIO9 */
+			linux,code = <BTN_3>;
+		};
+	};
+
+	regulator-usb-nrst {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_nrst";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy1>;
+
+	snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <10000 10000 10000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+			txc-skew-ps = <1860>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpio0 {	/* GPIO 0..29 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 30..57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio: pca9557@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp: lm75@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	i2cswitch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@6 {	/* Backplane EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {	/* Power board EEPROM */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			eeprom@51 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128", "jedec,spi-nor";
+		reg = <0>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+
+	n25q00@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <1>;		/* chip select */
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
new file mode 100644
index 000000000..a77846f73
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2013 Altera Corporation <www.altera.com>
+ */
+
+/dts-v1/;
+#include "socfpga.dtsi"
+
+/ {
+	model = "Altera SOCFPGA VT";
+	compatible = "altr,socfpga-vt", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <10000000>;
+				};
+			};
+		};
+
+		dwmmc0@ff704000 {
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		ethernet@ff700000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <7000000>;
+		};
+
+		serial0@ffc02000 {
+			clock-frequency = <7372800>;
+		};
+
+		serial1@ffc03000 {
+			clock-frequency = <7372800>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd08010>;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
new file mode 100644
index 000000000..8fcb6be6e
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s0 {
+					st,pins = "i2s0_grp";
+					st,function = "i2s0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				clcd {
+					st,pins = "clcd_grp" , "clcd_high_res";
+					st,function = "clcd";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+				sata {
+					st,pins = "sata0_grp";
+					st,function = "sata";
+				};
+				pcie {
+					st,pins = "pcie1_grp", "pcie2_grp";
+					st,function = "pci_express";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		miphy@eb800000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x80000>;
+			};
+			partition@80000 {
+				label = "u-boot";
+				reg = <0x80000 0x140000>;
+			};
+			partition@1C0000 {
+				label = "environment";
+				reg = <0x1C0000 0x40000>;
+			};
+			partition@200000 {
+				label = "dtb";
+				reg = <0x200000 0x40000>;
+			};
+			partition@240000 {
+				label = "linux";
+				reg = <0x240000 0xC00000>;
+			};
+			partition@E40000 {
+				label = "rootfs";
+				reg = <0xE40000 0x0>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "wakeup";
+				linux,code = <0x100>;
+				gpios = <&gpio0 7 0x4>;
+				debounce-interval = <20>;
+				wakeup-source;
+			};
+		};
+
+		gmac0: eth@e2000000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			gpio@d8400000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       suspended_rate = <2000000>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			spi0: spi@e0100000 {
+				status = "okay";
+				num-cs = <3>;
+				cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
+
+				stmpe610@0 {
+					compatible = "st,stmpe610";
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					spi-max-frequency = <1000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x7>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+					interrupts = <6 0x4>;
+					interrupt-parent = <&gpio1>;
+					irq-trigger = <0x2>;
+
+					stmpe_touchscreen {
+						compatible = "st,stmpe-ts";
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <2>;
+						ts,settling = <2>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+
+				m25p80@1 {
+					compatible = "st,m25p80";
+					reg = <1>;
+					spi-max-frequency = <12000000>;
+					spi-cpol;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+
+				spidev@2 {
+					compatible = "spidev";
+					reg = <2>;
+					spi-max-frequency = <25000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
new file mode 100644
index 000000000..c4b49baf9
--- /dev/null
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		spics: spics@e0700000{
+			compatible = "st,spear-spics-gpio";
+			reg = <0xe0700000 0x1000>;
+			st-spics,peripcfg-reg = <0x3b0>;
+			st-spics,sw-enable-bit = <12>;
+			st-spics,cs-value-bit = <11>;
+			st-spics,cs-enable-mask = <3>;
+			st-spics,cs-enable-shift = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		miphy0: miphy@eb800000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb800000 0x4000>;
+			misc = <&misc>;
+			phy-id = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		miphy1: miphy@eb804000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb804000 0x4000>;
+			misc = <&misc>;
+			phy-id = <1>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		miphy2: miphy@eb808000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb808000 0x4000>;
+			misc = <&misc>;
+			phy-id = <2>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ahci0: ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			phys = <&miphy0 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		ahci1: ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			phys = <&miphy1 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		ahci2: ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			phys = <&miphy2 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		pcie0: pcie@b1000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 68 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 68 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy0 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@b1800000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 69 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 69 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy1 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@b4000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 70 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 70 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy2 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0xc0020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "rmii";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1310-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			spi1: spi@5d400000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x5d400000 0x1000>;
+				interrupts = <0 99 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+
+			gpiopinctrl: gpio@d8400000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xd8400000 0x1000>;
+				interrupts = <0 100 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 246>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <246>;
+				st-plgpio,enb-reg = <0xd0>;
+				st-plgpio,wdata-reg = <0x90>;
+				st-plgpio,dir-reg = <0xb0>;
+				st-plgpio,ie-reg = <0x30>;
+				st-plgpio,rdata-reg = <0x70>;
+				st-plgpio,mis-reg = <0x10>;
+				st-plgpio,eit-reg = <0x50>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
new file mode 100644
index 000000000..f70ff56d4
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1 {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam0 {
+					st,pins = "cam0_grp";
+					st,function = "cam0";
+				};
+				cam1 {
+					st,pins = "cam1_grp";
+					st,function = "cam1";
+				};
+				cam2 {
+					st,pins = "cam2_grp";
+					st,function = "cam2";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+				pcie {
+					st,pins = "pcie_grp";
+					st,function = "pcie";
+				};
+
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		miphy@eb800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "u-boot";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "environment";
+				reg = <0x400000 0x100000>;
+			};
+			partition@500000 {
+				label = "dtb";
+				reg = <0x500000 0x100000>;
+			};
+			partition@600000 {
+				label = "linux";
+				reg = <0x600000 0xC00000>;
+			};
+			partition@1200000 {
+				label = "rootfs";
+				reg = <0x1200000 0x0>;
+			};
+		};
+
+		gmac0: eth@e2000000 {
+			phy-mode = "rgmii";
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "wakeup";
+				linux,code = <0x100>;
+				gpios = <&gpio1 1 0x4>;
+				debounce-interval = <20>;
+				wakeup-source;
+			};
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		i2s0: i2s-play@b2400000 {
+			status = "okay";
+		};
+
+		i2s1: i2s-rec@b2000000 {
+			status = "okay";
+		};
+
+		incodec: dir-hifi {
+			compatible = "dummy,dir-hifi";
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		outcodec: dit-hifi {
+			compatible = "dummy,dit-hifi";
+			status = "okay";
+		};
+
+		sound {
+			compatible = "spear,spear-evb";
+			audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
+			audio-codecs = <&incodec &outcodec &sta529 &sta529>;
+			codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
+			stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
+			dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
+			nr_controllers = <4>;
+		        status = "okay";
+		};
+
+		spdif0: spdif-in@d0100000 {
+			status = "okay";
+		};
+
+		spdif1: spdif-out@d0000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			i2s-play@b2400000 {
+				status = "okay";
+			};
+
+			i2s-rec@b2000000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			gpio@e2800000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+
+				sta529: sta529@1a {
+					compatible = "st,sta529";
+					reg = <0x1a>;
+				};
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+
+				eeprom0@56 {
+					compatible = "st,eeprom";
+					reg = <0x56>;
+				};
+
+				stmpe801@41 {
+					compatible = "st,stmpe801";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x41>;
+					interrupts = <4 0x4>;
+					interrupt-parent = <&gpio0>;
+					irq-trigger = <0x2>;
+
+					stmpegpio: stmpe_gpio {
+						compatible = "st,stmpe-gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       suspended_rate = <2000000>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			spi0: spi@e0100000 {
+				status = "okay";
+				num-cs = <3>;
+				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
+					   <&gpiopinctrl 85 0>;
+
+				m25p80@0 {
+					compatible = "m25p80";
+					reg = <0>;
+					spi-max-frequency = <12000000>;
+					spi-cpol;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+
+				stmpe610@1 {
+					compatible = "st,stmpe610";
+					spi-max-frequency = <1000000>;
+					spi-cpha;
+					reg = <1>;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x7>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+					interrupts = <100 0>;
+					interrupt-parent = <&gpiopinctrl>;
+					irq-trigger = <0x2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					stmpe_touchscreen {
+						compatible = "st,stmpe-ts";
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <2>;
+						ts,settling = <2>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+
+				spidev@2 {
+					compatible = "spidev";
+					reg = <2>;
+					spi-max-frequency = <25000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+			};
+
+			timer@ec800600 {
+				status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 000000000..66cd473ec
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+
+		spics: spics@e0700000{
+			compatible = "st,spear-spics-gpio";
+			reg = <0xe0700000 0x1000>;
+			st-spics,peripcfg-reg = <0x42c>;
+			st-spics,sw-enable-bit = <21>;
+			st-spics,cs-value-bit = <20>;
+			st-spics,cs-enable-mask = <3>;
+			st-spics,cs-enable-shift = <18>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		miphy0: miphy@eb800000 {
+			compatible = "st,spear1340-miphy";
+			reg = <0xeb800000 0x4000>;
+			misc = <&misc>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ahci0: ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			phys = <&miphy0 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		pcie0: pcie@b1000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 68 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 68 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy0 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+		};
+
+		i2s-play@b2400000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2400000 0x10000>;
+			interrupt-names = "play_irq";
+			interrupts = <0 98 0x4
+				      0 99 0x4>;
+			play;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		i2s-rec@b2000000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2000000 0x10000>;
+			interrupt-names = "record_irq";
+			interrupts = <0 100  0x4
+				      0 101 0x4>;
+			record;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1340-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		pwm: pwm@e0180000 {
+			compatible ="st,spear13xx-pwm";
+			reg = <0xe0180000 0x1000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spdif-in@d0100000 {
+			compatible = "st,spdif-in";
+			reg = < 0xd0100000 0x20000
+				0xd0110000 0x10000 >;
+			interrupts = <0 84 0x4>;
+			status = "disabled";
+		};
+
+		spdif-out@d0000000 {
+			compatible = "st,spdif-out";
+			reg = <0xd0000000 0x20000>;
+			interrupts = <0 85 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				write-16bit;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+
+			gpiopinctrl: gpio@e2800000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xe2800000 0x1000>;
+				interrupts = <0 107 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 252>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <250>;
+				st-plgpio,wdata-reg = <0x40>;
+				st-plgpio,dir-reg = <0x00>;
+				st-plgpio,ie-reg = <0x80>;
+				st-plgpio,rdata-reg = <0x20>;
+				st-plgpio,mis-reg = <0xa0>;
+				st-plgpio,eit-reg = <0x60>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
new file mode 100644
index 000000000..913553367
--- /dev/null
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 6 0x04
+			      0 7 0x04>;
+	};
+
+	L2: cache-controller {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	cpufreq {
+		compatible = "st,cpufreq-spear";
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+		status = "disabled";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0x80000000 0x80000000 0x20000000
+			  0xb0000000 0xb0000000 0x22000000
+			  0xd8000000 0xd8000000 0x01000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x1000>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+			dmas = <&dwdma0 0 0 0>;
+			dma-names = "data";
+		};
+
+		dwdma0: dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+
+			dma-channels = <8>;
+			#dma-cells = <3>;
+			dma-requests = <32>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			dma-masters = <2>;
+			data-width = <8 8>;
+			multi-block = <1 1 1 1 1 1 1 1>;
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+
+			dma-requests = <32>;
+			dma-channels = <8>;
+			dma-masters = <2>;
+			#dma-cells = <3>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			data-width = <8 8>;
+			multi-block = <1 1 1 1 1 1 1 1>;
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register*/
+			       0xb0800000 0x0010	/* NAND Base DATA */
+			       0xb0820000 0x0010	/* NAND Base ADDR */
+			       0xb0810000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,mode = <2>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 33 0x4
+				      0 34 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		pcm {
+			compatible = "st,pcm-audio";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			usbh0_id = <0>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			usbh1_id = <1>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			usbh0_id = <0>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			usbh1_id = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x02000000
+				  0xd8000000 0xd8000000 0x01000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			misc: syscon@e0700000 {
+				compatible = "st,spear1340-misc", "syscon";
+				reg = <0xe0700000 0x1000>;
+			};
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				interrupts = <0 52 0x4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			i2s@e0180000 {
+				compatible = "st,designware-i2s";
+				reg = <0xe0180000 0x1000>;
+				interrupt-names = "play_irq", "record_irq";
+				interrupts = <0 10 0x4
+					      0 11 0x4 >;
+				status = "disabled";
+			};
+
+			i2s@e0200000 {
+				compatible = "st,designware-i2s";
+				reg = <0xe0200000 0x1000>;
+				interrupt-names = "play_irq", "record_irq";
+				interrupts = <0 26 0x4
+					      0 53 0x4>;
+				status = "disabled";
+			};
+
+			spi0: spi@e0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xe0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 31 0x4>;
+				status = "disabled";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 35 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 12 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x4>;
+				status = "disabled";
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+				thermal_flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
new file mode 100644
index 000000000..2beb30ca2
--- /dev/null
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@99000000 {
+			st,pinmux-mode = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_pfmode_grp";
+					st,function = "clcd";
+				};
+				sdhci {
+					st,pins = "sdhci_4bit_grp";
+					st,function = "sdhci";
+				};
+				gpio1 {
+					st,pins = "gpio1_4_to_7_grp",
+						"gpio1_0_to_3_grp";
+					st,function = "gpio1";
+				};
+			};
+		};
+
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			cd-gpios = <&gpio1 0 0>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
new file mode 100644
index 000000000..b39bd5a22
--- /dev/null
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@99000000 {
+			compatible = "st,spear300-pinmux";
+			reg = <0x99000000 0x1000>;
+		};
+
+		clcd@60000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010	/* NAND Base DATA */
+			       0x80020000 0x0010	/* NAND Base ADDR */
+			       0x80010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0x50000000 {
+			compatible = "st,spear300-shirq";
+			reg = <0x50000000 0x1000>;
+			interrupts = <28>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				interrupts = <7>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
new file mode 100644
index 000000000..1c41e4a40
--- /dev/null
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b4000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				gpio0 {
+					st,pins = "gpio0_pin0_grp",
+						"gpio0_pin1_grp",
+						"gpio0_pin2_grp",
+						"gpio0_pin3_grp",
+						"gpio0_pin4_grp",
+						"gpio0_pin5_grp";
+					st,function = "gpio0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				emi {
+					st,pins = "emi_cs_0_to_5_grp";
+					st,function = "emi";
+				};
+				fsmc {
+					st,pins = "fsmc_grp";
+					st,function = "fsmc";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				uart3 {
+					st,pins = "uart3_grp";
+					st,function = "uart3";
+				};
+				uart4 {
+					st,pins = "uart4_grp";
+					st,function = "uart4";
+				};
+				uart5 {
+					st,pins = "uart5_grp";
+					st,function = "uart5";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
new file mode 100644
index 000000000..8ce751a13
--- /dev/null
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux: pinmux@b4000000 {
+			compatible = "st,spear310-pinmux";
+			reg = <0xb4000000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010	/* NAND Base DATA */
+			       0x40020000 0x0010	/* NAND Base ADDR */
+			       0x40010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0xb4000000 {
+			compatible = "st,spear310-shirq";
+			reg = <0xb4000000 0x1000>;
+			interrupts = <28 29 30 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				interrupts = <9>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				interrupts = <10>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				interrupts = <11>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				interrupts = <12>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			gpiopinctrl: gpio@b4000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb4000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x10>;
+				st-plgpio,wdata-reg = <0x20>;
+				st-plgpio,dir-reg = <0x30>;
+				st-plgpio,ie-reg = <0x50>;
+				st-plgpio,rdata-reg = <0x40>;
+				st-plgpio,mis-reg = <0x60>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
new file mode 100644
index 000000000..c322407a0
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr320 Evaluation Board";
+	compatible = "st,spear320-evb", "st,spear320";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_51_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii2 {
+					st,pins = "mii2_grp";
+					st,function = "mii2";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_37_38_grp";
+					st,function = "pwm0_1";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpiopinctrl 61 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio@b3000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
new file mode 100644
index 000000000..5c562fb48
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr320 HMI Board";
+	compatible = "st,spear320-hmi", "st,spear320";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_12_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii0_1 {
+					st,pins = "rmii0_1_grp";
+					st,function = "mii0_1";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_37_38_grp";
+					st,function = "pwm0_1";
+				};
+				pwm2 {
+					st,pins = "pwm2_pin_34_grp";
+					st,function = "pwm2";
+				};
+			};
+		};
+
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x80000>;
+			};
+			partition@80000 {
+				label = "u-boot";
+				reg = <0x80000 0x140000>;
+			};
+			partition@1C0000 {
+				label = "environment";
+				reg = <0x1C0000 0x40000>;
+			};
+			partition@200000 {
+				label = "dtb";
+				reg = <0x200000 0x40000>;
+			};
+			partition@240000 {
+				label = "linux";
+				reg = <0x240000 0xC00000>;
+			};
+			partition@E40000 {
+				label = "rootfs";
+				reg = <0xE40000 0x0>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "user button 1";
+				linux,code = <0x100>;
+				gpios = <&stmpegpio 3 0x4>;
+				debounce-interval = <20>;
+				wakeup-source;
+			};
+
+			button@2 {
+				label = "user button 2";
+				linux,code = <0x200>;
+				gpios = <&stmpegpio 2 0x4>;
+				debounce-interval = <20>;
+				wakeup-source;
+			};
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		pwm: pwm@a8000000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpiopinctrl 50 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		usbd@e1100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio@b3000000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+				status = "okay";
+
+				stmpe811@41 {
+					compatible = "st,stmpe811";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x41>;
+					irq-over-gpio;
+					irq-gpios = <&gpiopinctrl 29 0x4>;
+					id = <0>;
+					blocks = <0x5>;
+					irq-trigger = <0x1>;
+
+					stmpegpio: stmpe-gpio {
+						compatible = "st,stmpe-gpio";
+						reg = <0>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio,norequest-mask = <0xF3>;
+					};
+
+					stmpe610-ts {
+						compatible = "stmpe,ts";
+						reg = <0>;
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <3>;
+						ts,settling = <4>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
new file mode 100644
index 000000000..3bc1e93a0
--- /dev/null
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x80000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux: pinmux@b3000000 {
+			compatible = "st,spear320-pinmux";
+			reg = <0xb3000000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		clcd@90000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <8>;
+			interrupt-parent = <&shirq>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010	/* NAND Base DATA */
+			       0x50020000 0x0010	/* NAND Base ADDR */
+			       0x50010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <10>;
+			interrupt-parent = <&shirq>;
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0xb3000000 {
+			compatible = "st,spear320-shirq";
+			reg = <0xb3000000 0x1000>;
+			interrupts = <30 28 29 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			interrupts = <15>;
+			interrupt-parent = <&shirq>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			interrupts = <16>;
+			interrupt-parent = <&shirq>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@a8000000 {
+			compatible ="st,spear-pwm";
+			reg = <0xa8000000 0x1000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+                };
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x20000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				interrupts = <21>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				interrupts = <13>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				interrupts = <14>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			gpiopinctrl: gpio@b3000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb3000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x24>;
+				st-plgpio,wdata-reg = <0x34>;
+				st-plgpio,dir-reg = <0x44>;
+				st-plgpio,ie-reg = <0x64>;
+				st-plgpio,rdata-reg = <0x54>;
+				st-plgpio,mis-reg = <0x84>;
+				st-plgpio,eit-reg = <0x94>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
new file mode 100644
index 000000000..cc88ebe7a
--- /dev/null
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "snps,dwmac-3.40a";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
new file mode 100644
index 000000000..a25b86d14
--- /dev/null
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+/include/ "spear600.dtsi"
+
+/ {
+	model = "ST SPEAr600 Evaluation Board";
+	compatible = "st,spear600-evb", "st,spear600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&clcd {
+	status = "okay";
+};
+
+&dmac {
+	status = "okay";
+};
+
+&ehci_usb0 {
+	status = "okay";
+};
+
+&ehci_usb1 {
+	status = "okay";
+};
+
+&gmac {
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&ohci_usb0 {
+	status = "okay";
+};
+
+&ohci_usb1 {
+	status = "okay";
+};
+
+&smi {
+	status = "okay";
+	clock-rate = <50000000>;
+
+	flash@f8000000 {
+		reg = <0xf8000000 0x800000>;
+		st,smi-fast-mode;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x10000>;
+			};
+			partition@10000 {
+				label = "u-boot";
+				reg = <0x10000 0x50000>;
+			};
+			partition@60000 {
+				label = "environment";
+				reg = <0x60000 0x10000>;
+			};
+			partition@70000 {
+				label = "dtb";
+				reg = <0x70000 0x10000>;
+			};
+			partition@80000 {
+				label = "linux";
+				reg = <0x80000 0x310000>;
+			};
+			partition@390000 {
+				label = "rootfs";
+				reg = <0x390000 0x0>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&i2c {
+	clock-frequency = <400000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
new file mode 100644
index 000000000..9d5a04a46
--- /dev/null
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "st,spear600";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic0: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f1000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		clcd: clcd@fc200000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xfc200000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <13>;
+			status = "disabled";
+		};
+
+		dmac: dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		gmac: ethernet@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24 23>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-mode = "gmii";
+			status = "disabled";
+		};
+
+		fsmc: flash@d1800000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd1800000 0x1000	/* FSMC Register */
+			       0xd2000000 0x0010	/* NAND Base DATA */
+			       0xd2020000 0x0010	/* NAND Base ADDR */
+			       0xd2010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			status = "disabled";
+		};
+
+		ehci_usb0: ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		ehci_usb1: ehci@e2000000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe2000000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		ohci_usb0: ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci_usb1: ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			uart0: serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			uart1: serial@d0080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0080000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <25>;
+				status = "disabled";
+			};
+
+			/* local/cpu GPIO */
+			gpio0: gpio@f0100000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xf0100000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <18>;
+			};
+
+			/* basic GPIO */
+			gpio1: gpio@fc980000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xfc980000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <19>;
+			};
+
+			/* appl GPIO */
+			gpio2: gpio@d8100000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xd8100000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <4>;
+			};
+
+			i2c: i2c@d0200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0200000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			rtc: rtc@fc900000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupt-parent = <&vic0>;
+				interrupts = <16>;
+			};
+
+			adc: adc@d820b000 {
+				compatible = "st,spear600-adc";
+				reg = <0xd820b000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h
new file mode 100644
index 000000000..d80551202
--- /dev/null
+++ b/arch/arm/boot/dts/st-pincfg.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1	1
+#define ALT2	2
+#define ALT3	3
+#define ALT4	4
+#define ALT5	5
+#define ALT6	6
+#define ALT7	7
+
+/* Output enable */
+#define OE			(1 << 27)
+/* Pull Up */
+#define PU			(1 << 26)
+/* Open Drain */
+#define OD			(1 << 25)
+#define RT			(1 << 23)
+#define INVERTCLK		(1 << 22)
+#define CLKNOTDATA		(1 << 21)
+#define DOUBLE_EDGE		(1 << 20)
+#define CLK_A			(0 << 18)
+#define CLK_B			(1 << 18)
+#define CLK_C			(2 << 18)
+#define CLK_D			(3 << 18)
+
+/* User-frendly defines for Pin Direction */
+		/* oe = 0, pu = 0, od = 0 */
+#define IN			(0)
+		/* oe = 0, pu = 1, od = 0 */
+#define IN_PU			(PU)
+		/* oe = 1, pu = 0, od = 0 */
+#define OUT			(OE)
+		/* oe = 1, pu = 0, od = 1 */
+#define BIDIR			(OE | OD)
+		/* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU		(OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS		(0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO	(RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO	(RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO		(RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK		(RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
new file mode 100644
index 000000000..16d503692
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			    <&gpadc 0x03>, /* Main charger voltage */
+			    <&gpadc 0x08>, /* Main battery voltage */
+			    <&gpadc 0x09>, /* VBUS */
+			    <&gpadc 0x0a>, /* Main charger current */
+			    <&gpadc 0x0b>, /* USB charger current */
+			    <&gpadc 0x0c>, /* Backup battery voltage */
+			    <&gpadc 0x0d>, /* Die temperature */
+			    <&gpadc 0x12>; /* Crystal temperature */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				compatible = "stericsson,ab8500";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8500_gpio: ab8500-gpiocontroller {
+					compatible = "stericsson,ab8500-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					main_charger_v: channel@03 {
+						reg = <0x03>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					main_charger_c: channel@0a {
+						reg = <0x0a>;
+					};
+					usb_charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					die_temp: channel@0d {
+						reg = <0x0d>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+					xtal_temp: channel@12 {
+						reg = <0x12>;
+					};
+					vbat_true_meas: channel@13 {
+						reg = <0x13>;
+					};
+					bat_ctrl_and_ibat: channel@1c {
+						reg = <0x1c>;
+					};
+					vbat_meas_and_ibat: channel@1d {
+						reg = <0x1d>;
+					};
+					vbat_true_meas_and_ibat: channel@1e {
+						reg = <0x1e>;
+					};
+					bat_temp_and_ibat: channel@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				ab8500_temp {
+					compatible = "stericsson,abx500-temp";
+					io-channels = <&gpadc 0x06>,
+						      <&gpadc 0x07>;
+					io-channel-name = "aux1", "aux2";
+				};
+
+				ab8500_battery: ab8500_battery {
+					stericsson,battery-type = "LIPO";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					compatible = "stericsson,ab8500-fg";
+					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					compatible = "stericsson,ab8500-btemp";
+					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							"bat_ctrl";
+				};
+
+				ab8500_charger {
+					compatible	= "stericsson,ab8500-charger";
+					battery		= <&ab8500_battery>;
+					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					io-channels = <&gpadc 0x03>,
+						      <&gpadc 0x0a>,
+						      <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "main_charger_v",
+							"main_charger_c",
+							"vbus_v",
+							"usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					compatible	= "stericsson,ab8500-chargalg";
+					battery		= <&ab8500_battery>;
+				};
+
+				ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm-1 {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-pwm-2 {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-pwm-3 {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ext_regulators: ab8500-ext-regulators {
+					compatible = "stericsson,ab8500-ext-regulator";
+
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext2_reg: ab8500_ext2 {
+						regulator-min-microvolt = <1360000>;
+						regulator-max-microvolt = <1360000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext3_reg: ab8500_ext3 {
+						regulator-min-microvolt = <3400000>;
+						regulator-max-microvolt = <3400000>;
+						regulator-boot-on;
+					};
+				};
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+					vin-supply = <&ab8500_ext3_reg>;
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi-controller@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi-controller@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi-controller@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
new file mode 100644
index 000000000..8d2cda0b4
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			      <&gpadc 0x08>, /* Main battery voltage */
+			      <&gpadc 0x09>, /* VBUS */
+			      <&gpadc 0x0b>, /* Charger current */
+			      <&gpadc 0x0c>; /* Backup battery voltage */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				compatible = "stericsson,ab8505";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8505_gpio: ab8505-gpiocontroller {
+					compatible = "stericsson,ab8505-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+				};
+
+				ab8500_battery: ab8500_battery {
+					status = "disabled";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-fg";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					status = "disabled";
+					compatible = "stericsson,ab8500-btemp";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							  "bat_ctrl";
+				};
+
+				ab8500_charger {
+					status = "disabled";
+					compatible = "stericsson,ab8500-charger";
+					battery = <&ab8500_battery>;
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					io-channels = <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "vbus_v",
+							  "usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-chargalg";
+					battery = <&ab8500_battery>;
+				};
+
+				ab8500_usb: ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8505-regulators {
+					compatible = "stericsson,ab8505-regulator";
+
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					// supply for gpadc; ADC LDO
+					ab8500_ldo_adc_reg: ab8500_ldo_adc {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-aux8; VAUX8 LDO
+					ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi-controller@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi-controller@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi-controller@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
new file mode 100644
index 000000000..344d29853
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <998400 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Modem trace memory */
+		ram@06000000 {
+			reg = <0x06000000 0x00f00000>;
+			no-map;
+		};
+
+		/* Modem shared memory */
+		ram@06f00000 {
+			reg = <0x06f00000 0x00100000>;
+			no-map;
+		};
+
+		/* Modem private memory */
+		ram@07000000 {
+			reg = <0x07000000 0x01000000>;
+			no-map;
+		};
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
new file mode 100644
index 000000000..287804e9e
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <1152000 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Modem trace memory */
+		ram@06000000 {
+			reg = <0x06000000 0x00f00000>;
+			no-map;
+		};
+
+		/* Modem shared memory */
+		ram@06f00000 {
+			reg = <0x06f00000 0x00100000>;
+			no-map;
+		};
+
+		/* Modem private memory */
+		ram@07000000 {
+			reg = <0x07000000 0x01000000>;
+			no-map;
+		};
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi
new file mode 100644
index 000000000..0afff7031
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db9500.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <1152000 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
new file mode 100644
index 000000000..7bf7a2d34
--- /dev/null
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+&pinctrl {
+	/* Settings for all UART default and sleep states */
+	uart0 {
+		u0_a_1_default: u0_a_1_default {
+			default_mux {
+				function = "u0";
+				groups = "u0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u0_a_1_sleep: u0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO1_AJ3"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO3_AH3"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+	};
+
+	uart1 {
+		u1rxtx_a_1_default: u1rxtx_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1rxtx_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+
+		u1ctsrts_a_1_default: u1ctsrts_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1ctsrts_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+		};
+	};
+
+	uart2 {
+		u2rxtx_c_1_default: u2rxtx_c_1_default {
+			default_mux {
+				function = "u2";
+				groups = "u2rxtx_c_1";
+			};
+			default_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all I2C default and sleep states */
+	i2c0 {
+		i2c0_a_1_default: i2c0_a_1_default {
+			default_mux {
+				function = "i2c0";
+				groups = "i2c0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c0_a_1_sleep: i2c0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c1 {
+		i2c1_b_2_default: i2c1_b_2_default {
+			default_mux {
+				function = "i2c1";
+				groups = "i2c1_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c1_b_2_sleep: i2c1_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c2 {
+		i2c2_b_2_default: i2c2_b_2_default {
+			default_mux {
+				function = "i2c2";
+				groups = "i2c2_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c2_b_2_sleep: i2c2_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c3 {
+		i2c3_c_2_default: i2c3_c_2_default {
+			default_mux {
+				function = "i2c3";
+				groups = "i2c3_c_2";
+			};
+			default_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c3_c_2_sleep: i2c3_c_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Activating I2C4 will conflict with UART1 about the same pins so do not
+	 * enable I2C4 and UART1 at the same time.
+	 */
+	i2c4 {
+		i2c4_b_1_default: i2c4_b_1_default {
+			default_mux {
+				function = "i2c4";
+				groups = "i2c4_b_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c4_b_1_sleep: i2c4_b_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all MMC/SD/SDIO default and sleep states */
+	sdi0 {
+		/* This is the external SD card slot, 4 bits wide */
+		mc0_a_1_default: mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&out_hi>;
+			};
+			default_cfg2 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg4 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_1_sleep: mc0_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+
+		mc0_a_2_default: mc0_a_2_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_2_sleep: mc0_a_2_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi1 {
+		/* This is the WLAN SDIO 4 bits wide */
+		mc1_a_1_default: mc1_a_1_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO209_AG15"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_1_sleep: mc1_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO209_AG15", /* FBCLK */
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+
+		mc1_a_2_default: mc1_a_2_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_2_sleep: mc1_a_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi2 {
+		/* This is the eMMC 8 bits wide, usually PoP eMMC */
+		mc2_a_1_default: mc2_a_1_default {
+			default_mux {
+				function = "mc2";
+				groups = "mc2_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO129_B4", /* CMD */
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc2_a_1_sleep: mc2_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO130_C8", /* FBCLK */
+				"GPIO129_B4"; /* CMD */
+				ste,config = <&in_wkup_pdis_en>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi4 {
+		/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+		mc4_a_1_default: mc4_a_1_default {
+			default_mux {
+				function = "mc4";
+				groups = "mc4_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO202_AF25"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc4_a_1_sleep: mc4_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO202_AF25", /* FBCLK */
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+	 * cannot be muxed onto any pins.
+	 */
+	msp0 {
+		msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
+			default_msp0_mux {
+				function = "msp0";
+				groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+			};
+			default_msp0_cfg {
+				pins =
+				"GPIO12_AC4", /* TXD */
+				"GPIO15_AC3", /* RXD */
+				"GPIO13_AF3", /* TFS */
+				"GPIO14_AE3"; /* TCK */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp1 {
+		msp1txrx_a_1_default: msp1txrx_a_1_default {
+			default_mux {
+				function = "msp1";
+				groups = "msp1txrx_a_1", "msp1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO33_AF2";
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO34_AE1",
+				"GPIO35_AE2",
+				"GPIO36_AG2";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp2 {
+		msp2_a_1_default: msp2_a_1_default {
+			/* MSP2 usually used for HDMI audio */
+			default_mux {
+				function = "msp2";
+				groups = "msp2_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO193_AH27", /* TXD */
+				"GPIO194_AF27", /* TCK */
+				"GPIO195_AG28"; /* TFS */
+				ste,config = <&in_pd>;
+			};
+			default_cfg2 {
+				pins = "GPIO196_AG26"; /* RXD */
+				ste,config = <&out_lo>;
+			};
+		};
+	};
+
+	musb {
+		usb_a_1_default: usb_a_1_default {
+			default_mux {
+				function = "usb";
+				groups = "usb_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29", /* DIR */
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		usb_a_1_sleep: usb_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29"; /* DIR */
+				ste,config = <&slpm_wkup_pdis_en>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&slpm_in_wkup_pdis_en>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
new file mode 100644
index 000000000..05fd544b0
--- /dev/null
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* This stablilizes the device enumeration */
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "ste,dbx500-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x300>;
+			clocks = <&prcmu_clk PRCMU_ARMSS>;
+			clock-names = "cpu";
+			clock-latency = <20000>;
+			#cooling-cells = <2>;
+		};
+		CPU1: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x301>;
+		};
+	};
+
+	thermal-zones {
+		/*
+		 * Thermal zone for the SoC, using the thermal sensor in the
+		 * PRCMU for temperature and the cpufreq driver for passive
+		 * cooling.
+		 */
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			/*
+			 * This sensor fires interrupts to update the thermal
+			 * zone, so no polling is needed.
+			 */
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				trip = <&cpu_alert>;
+				cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500", "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		ptm@801ae000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801ae000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@801af000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801af000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		funnel@801a6000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x801a6000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "atclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etb_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in_port0: endpoint {
+						remote-endpoint = <&funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		tpiu@80190000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x80190000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		etb@801a4000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x801a4000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		scu@a0410000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xa0410000 0x100>;
+		};
+
+		/*
+		 * The backup RAM is used for retention during sleep
+		 * and various things like spin tables
+		 */
+		backupram@80150000 {
+			compatible = "ste,dbx500-backupram";
+			reg = <0x80150000 0x2000>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pm_domains: pm_domains0 {
+			compatible = "stericsson,ux500-pm-domains";
+			#power-domain-cells = <1>;
+		};
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+			/*
+			 * Registers for the CLKRST block on peripheral
+			 * groups 1, 2, 3, 5, 6,
+			 */
+			reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+			    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+			    <0xa03cf000 0x1000>;
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+
+			clocks = <&smp_twd_clk>;
+		};
+
+		watchdog@a0410620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xa0410620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&smp_twd_clk>;
+		};
+
+		rtc@80154000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x80154000 0x1000>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio1: gpio@8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
+			gpio-ranges = <&pinctrl 0 32 5>;
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio2: gpio@8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio3: gpio@8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
+			gpio-ranges = <&pinctrl 0 96 2>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio4: gpio@8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio5: gpio@8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
+			gpio-ranges = <&pinctrl 0 160 12>;
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio6: gpio@8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
+			gpio-ranges = <&pinctrl 0 192 32>;
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio7: gpio@8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
+			gpio-ranges = <&pinctrl 0 224 7>;
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio8: gpio@a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+			gpio-ranges = <&pinctrl 0 256 12>;
+			clocks = <&prcc_pclk 5 1>;
+		};
+
+		pinctrl: pinctrl {
+			compatible = "stericsson,db8500-pinctrl";
+			nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
+						<&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
+						<&gpio8>;
+			prcm = <&prcmu>;
+		};
+
+		usb_per5@a03e0000 {
+			compatible = "stericsson,db8500-musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+
+			dr_mode = "otg";
+
+			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+			       <&dma 38 0 0x0>, /* Logical - MemToDev */
+			       <&dma 37 0 0x2>, /* Logical - DevToMem */
+			       <&dma 37 0 0x0>, /* Logical - MemToDev */
+			       <&dma 36 0 0x2>, /* Logical - DevToMem */
+			       <&dma 36 0 0x0>, /* Logical - MemToDev */
+			       <&dma 19 0 0x2>, /* Logical - DevToMem */
+			       <&dma 19 0 0x0>, /* Logical - MemToDev */
+			       <&dma 18 0 0x2>, /* Logical - DevToMem */
+			       <&dma 18 0 0x0>, /* Logical - MemToDev */
+			       <&dma 17 0 0x2>, /* Logical - DevToMem */
+			       <&dma 17 0 0x0>, /* Logical - MemToDev */
+			       <&dma 16 0 0x2>, /* Logical - DevToMem */
+			       <&dma 16 0 0x0>, /* Logical - MemToDev */
+			       <&dma 39 0 0x2>, /* Logical - DevToMem */
+			       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+			dma-names = "iep_1_9",  "oep_1_9",
+				    "iep_2_10", "oep_2_10",
+				    "iep_3_11", "oep_3_11",
+				    "iep_4_12", "oep_4_12",
+				    "iep_5_13", "oep_5_13",
+				    "iep_6_14", "oep_6_14",
+				    "iep_7_15", "oep_7_15",
+				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
+		};
+
+		dma: dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			reg-names = "base", "lcpa";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <3>;
+			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
+		};
+
+		prcmu: prcmu@80157000 {
+			compatible = "stericsson,db8500-prcmu", "syscon";
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			thermal: thermal@801573c0 {
+				compatible = "stericsson,db8500-thermal";
+				reg = <0x801573c0 0x40>;
+				interrupt-parent = <&prcmu>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+				#thermal-sensor-cells = <0>;
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+				};
+			};
+		};
+
+		i2c0: i2c@80004000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80004000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@80122000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80122000 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c2: i2c@80128000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80128000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c3: i2c@80110000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80110000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		i2c4: i2c@8012a000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		ssp0: spi@80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80002000 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		ssp1: spi@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi0: spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi1: spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi2: spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		spi3: spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		serial0: uart@80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+			       <&dma 13 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		serial1: uart@80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+			       <&dma 12 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		serial2: uart@80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+			       <&dma 11 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		sdi0_per1@80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+			       <&dma 29 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi1_per2@80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+			       <&dma 32 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi2_per3@80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+			       <&dma 28 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi3_per2@80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
+			       <&dma 41 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi4_per2@80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+			       <&dma 42 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi5_per3@80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80008000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
+			       <&dma 43 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+		};
+
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
+			       <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v1 */
+			dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "tx";
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
+			       <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
+                                                    HighPrio - Fixed */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v2 */
+			dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
+			dma-names = "rx";
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
+
+		gpu@a0300000 {
+			/*
+			 * This block is referred to as "Smart Graphics Adapter SGA500"
+			 * in documentation but is in practice a pretty straight-forward
+			 * MALI-400 GPU block.
+			 */
+			compatible = "stericsson,db8500-mali", "arm,mali-400";
+			reg = <0xa0300000 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "combined";
+			clocks = <&prcmu_clk PRCMU_ACLK>, <&prcmu_clk PRCMU_SGACLK>;
+			clock-names = "bus", "core";
+			mali-supply = <&db8500_sga_reg>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		mcde@a0350000 {
+			compatible = "ste,mcde";
+			reg = <0xa0350000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			epod-supply = <&db8500_b2r2_mcde_reg>;
+			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
+				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
+				 <&prcmu_clk PRCMU_PLLDSI>; /* HDMI clock */
+			clock-names = "mcde", "lcd", "hdmi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			dsi0: dsi-controller@a0351000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0351000 0x1000>;
+				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+				clock-names = "hs", "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+			dsi1: dsi-controller@a0352000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0352000 0x1000>;
+				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+				clock-names = "hs", "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+			dsi2: dsi-controller@a0353000 {
+				compatible = "ste,mcde-dsi";
+				reg = <0xa0353000 0x1000>;
+				/* This DSI port only has the Low Power / Energy Save clock */
+				clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+				clock-names = "lp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cryp@a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
+		};
+
+		hash@a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
new file mode 100644
index 000000000..3ccb7b5c7
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Linaro Ltd.
+ */
+
+#include "ste-ab8500.dtsi"
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpiocontroller {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
new file mode 100644
index 000000000..434fa6baf
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-dbx5x0-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl {
+			/* Settings for all SPI default and sleep states */
+			spi2 {
+				spi2_default_mode: spi_default {
+					default_mux {
+						function = "spi2";
+						groups = "spi2_oc1_2";
+					};
+					default_cfg1 {
+						pins = "GPIO216_AG12"; /* FRM */
+						ste,config = <&gpio_out_hi>;
+					};
+					default_cfg2 {
+						pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+					default_cfg3 {
+						pins =
+						"GPIO215_AH13", /* TXD */
+						"GPIO217_AH12"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+				};
+
+				spi2_idle_mode: spi_idle {
+					/*
+					 * The idle mode is basically sleep mode sans wakeups. Also
+					 * note that we have muxes the pins off the function here
+					 * as we do not state any muxing.
+					 */
+					idle_cfg1 {
+						pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_pdis>;
+					};
+					idle_cfg2 {
+						pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_pdis>;
+					};
+					idle_cfg3 {
+						pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_pdis>;
+					};
+				};
+
+				spi2_sleep_mode: spi_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO216_AG12", /* FRM */
+						"GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_wkup_pdis>;
+					};
+				};
+			};
+
+			mcde {
+				lcd_default_mode: lcd_default {
+					default_mux1 {
+						/* Mux in VSI0 and all the data lines */
+						function = "lcd";
+						groups =
+						"lcdvsi0_a_1", /* VSI0 for LCD */
+						"lcd_d0_d7_a_1", /* Data lines */
+						"lcdvsi1_a_1"; /* VSI1 for HDMI */
+					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
+					default_cfg1 {
+						pins =
+						"GPIO68_E1", /* VSI0 */
+						"GPIO69_E2"; /* VSI1 */
+						ste,config = <&in_pu>;
+					};
+				};
+				lcd_sleep_mode: lcd_sleep {
+					sleep_cfg1 {
+						pins = "GPIO69_E2"; /* VSI1 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			ske {
+				/* SKE keys on position 2 in an 8x8 matrix */
+				ske_kpa2_default_mode: ske_kpa2_default {
+					default_mux {
+						function = "kp";
+						groups = "kp_a_2";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO153_B17", /* I7 */
+						"GPIO154_C16", /* I6 */
+						"GPIO155_C19", /* I5 */
+						"GPIO156_C17", /* I4 */
+						"GPIO161_D21", /* I3 */
+						"GPIO162_D20", /* I2 */
+						"GPIO163_C20", /* I1 */
+						"GPIO164_B21"; /* I0 */
+						ste,config = <&in_pd>;
+					};
+					default_cfg2 {
+						pins =
+						"GPIO157_A18", /* O7 */
+						"GPIO158_C18", /* O6 */
+						"GPIO159_B19", /* O5 */
+						"GPIO160_B20", /* O4 */
+						"GPIO165_C21", /* O3 */
+						"GPIO166_A22", /* O2 */
+						"GPIO167_B24", /* O1 */
+						"GPIO168_C22"; /* O0 */
+						ste,config = <&out_lo>;
+					};
+				};
+				ske_kpa2_sleep_mode: ske_kpa2_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO153_B17", /* I7 */
+						"GPIO154_C16", /* I6 */
+						"GPIO155_C19", /* I5 */
+						"GPIO156_C17", /* I4 */
+						"GPIO161_D21", /* I3 */
+						"GPIO162_D20", /* I2 */
+						"GPIO163_C20", /* I1 */
+						"GPIO164_B21"; /* I0 */
+						ste,config = <&slpm_in_pu_wkup_pdis_en>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO157_A18", /* O7 */
+						"GPIO158_C18", /* O6 */
+						"GPIO159_B19", /* O5 */
+						"GPIO160_B20", /* O4 */
+						"GPIO165_C21", /* O3 */
+						"GPIO166_A22", /* O2 */
+						"GPIO167_B24", /* O1 */
+						"GPIO168_C22"; /* O0 */
+						ste,config = <&slpm_out_lo_pdis>;
+					};
+				};
+				/*
+				 * SKE keys on position 1 and "other C1" combi giving
+				 * six rows of six keys.
+				 */
+				ske_kpaoc1_default_mode: ske_kpaoc1_default {
+					default_mux {
+						function = "kp";
+						groups = "kp_a_1", "kp_oc1_1";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO91_B6", /* KP_O0 */
+						"GPIO90_A3", /* KP_O1 */
+						"GPIO87_B3", /* KP_O2 */
+						"GPIO86_C6", /* KP_O3 */
+						"GPIO96_D8", /* KP_O6 */
+						"GPIO94_D7"; /* KP_O7 */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins =
+						"GPIO93_B7", /* KP_I0 */
+						"GPIO92_D6", /* KP_I1 */
+						"GPIO89_E6", /* KP_I2 */
+						"GPIO88_C4", /* KP_I3 */
+						"GPIO97_D9", /* KP_I6 */
+						"GPIO95_E8"; /* KP_I7 */
+						ste,config = <&in_pu>;
+					};
+				};
+			};
+
+			wlan {
+				wlan_default_mode: wlan_default {
+					/*
+					 * Activate this mode with the WLAN chip.
+					 * These are plain GPIO pins used by WLAN
+					 */
+					default_cfg1 {
+						pins =
+						"GPIO226_AF8", /* WLAN_PMU_EN */
+						"GPIO85_D5"; /* WLAN_ENA */
+						ste,config = <&gpio_out_lo>;
+					};
+					default_cfg2 {
+						pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
new file mode 100644
index 000000000..b8fd8f18b
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			stmpe1601: stmpe1601@40 {
+				compatible = "st,stmpe1601";
+				reg = <0x40>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-parent = <&gpio6>;
+				interrupt-controller;
+				vcc-supply = <&db8500_vsmps2_reg>;
+				vio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&stmpe_stuib_mode>;
+
+				wakeup-source;
+				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					st,scan-count = <8>;
+					st,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
+			};
+		};
+
+		/* Sensors mounted on this board variant */
+		i2c@80128000 {
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_stuib_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_stuib_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@5c {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5c>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
+			};
+
+			bu21013_tp@5d {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5d>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
+			};
+		};
+
+		pinctrl {
+			/* Pull up this GPIO pin */
+			stmpe {
+				stmpe_stuib_mode: stmpe_stuib {
+					stuib_cfg {
+						ste,pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			prox {
+				prox_stuib_mode: prox_stuib {
+					stuib_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_stuib_mode: stuib_tvk {
+					stuib_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_stuib_mode: accel_stuib {
+					/* Accelerometer interrupt lines 1 & 2 */
+					stuib_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_stuib_mode: magneto_stuib {
+					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+					stuib_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pu>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			touch {
+				touch_rohm_mode: touch_rohm {
+					/*
+					 * ROHM touch screen uses GPIO 143 for
+					 * RST1, GPIO 146 for RST2 and
+					 * GPIO 67 for interrupts. Pull-up
+					 * the IRQ line and drive both
+					 * reset signals low.
+					 */
+					stuib_cfg1 {
+						pins = "GPIO143_D12", "GPIO146_D13";
+						ste,config = <&gpio_out_lo>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO67_G2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi-controller@a0351000 {
+				panel {
+					compatible = "samsung,s6d16d0";
+					reg = <0>;
+					vdd1-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
new file mode 100644
index 000000000..de82b9db9
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				drive-open-drain;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lsm303dlh@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlh-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				/* INT2 would need to be open drain */
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi-controller@a0351000 {
+				panel {
+					compatible = "samsung,s6d16d0";
+					reg = <0>;
+					vdd1-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
new file mode 100644
index 000000000..457bddabc
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			accelerometer@19 {
+				compatible = "st,lsm303dlhc-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x19>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
+			};
+			magnetometer@1e {
+				compatible = "st,lsm303dlm-magn";
+				st,drdy-int-pin = <1>;
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				// This interrupt is not properly working with the driver
+				// interrupt-parent = <&gpio1>;
+				// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magn_tvk_mode>;
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi-controller@a0351000 {
+				panel {
+					compatible = "sony,acx424akp";
+					reg = <0>;
+					vddi-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+
+		pinctrl {
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			magnetometer {
+				magn_tvk_mode: magn_tvk {
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
new file mode 100644
index 000000000..e1dbfae22
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * Device Tree for the TVK1281618 family of UIBs
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			tc35893@44 {
+				compatible = "toshiba,tc35893";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35893_tvk_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				tc3589x_gpio {
+					compatible = "toshiba,tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+				tc3589x_keypad {
+					compatible = "toshiba,tc3589x-keypad";
+					interrupts = <6>;
+					debounce-delay-ms = <4>;
+					keypad,num-columns = <8>;
+					keypad,num-rows = <8>;
+					linux,no-autorepeat;
+					wakeup-source;
+					linux,keymap = <0x0301006b
+						        0x04010066
+							0x06040072
+							0x040200d7
+							0x0303006a
+							0x0205000e
+							0x0607008b
+							0x0500001c
+							0x0403000b
+							0x03040034
+							0x05020067
+							0x0305006c
+							0x040500e7
+							0x0005009e
+							0x06020073
+							0x01030039
+							0x07060069
+							0x050500d9>;
+				};
+			};
+		};
+		/* Sensors mounted on all board variants */
+		i2c@80128000 {
+			ak8974@f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+				dvdd-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			l3g4200d@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				st,drdy-int-pin = <2>;
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				interrupts-extended =
+				<&gpio1 0 IRQ_TYPE_EDGE_RISING>,
+				<&gpio0 31 IRQ_TYPE_EDGE_RISING>;
+			};
+			lsp001wm@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+
+		i2c@80110000 {
+			synaptics@4b {
+				/* Synaptics RMI4 TM1217 touchscreen */
+				compatible = "syna,rmi4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x4b>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&synaptics_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+				rmi-f01@1 {
+					reg = <0x1>;
+					syna,nosleep = <1>;
+				};
+				rmi-f11@11 {
+					reg = <0x11>;
+					touchscreen-inverted-x;
+					syna,sensor-type = <1>;
+				};
+			};
+		};
+
+		pinctrl {
+			/* Pull up this GPIO pin */
+			tc35893 {
+				tc35893_tvk_mode: tc35893_tvk {
+					tvk_cfg {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			prox {
+				prox_tvk_mode: prox_tvk {
+					tvk_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_tvk_mode: hall_tvk {
+					tvk_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			gyroscope {
+				/*
+				 * These lines are shared between Gyroscope l3g400dh
+				 * and AK8974 magnetometer.
+				 */
+				gyro_magn_tvk_mode: gyro_magn_tvk {
+					 /* GPIO 31 used for INT pull down the line */
+					tvk_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pd>;
+					};
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			synaptics {
+				synaptics_tvk_mode: synaptics_tvk {
+					/* Touchscreen uses GPIO 84 */
+					tvk_cfg1 {
+						pins = "GPIO84_C2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
new file mode 100644
index 000000000..3586b5d78
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "ste-href-family-pinctrl.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc {
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* This UART is unused and thus left disabled */
+		uart@80121000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
+		};
+
+		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
+			lp5521@33 {
+				compatible = "national,lp5521";
+				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+					linux,default-trigger = "heartbeat";
+				};
+				chan@1 {
+					reg = <1>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+				chan@2 {
+					reg = <2>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+			lp5521@34 {
+				compatible = "national,lp5521";
+				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+				chan@1 {
+					reg = <1>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+				chan@2 {
+					reg = <2>;
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
+				};
+			};
+			bh1780@29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x29>;
+			};
+		};
+
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
+		};
+
+		/* ST6G3244ME level translator for 1.8/2.9 V */
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			full-pwr-cycle;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			non-removable;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&db8500_vsmps2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		msp0: msp@80123000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
+			status = "okay";
+		};
+
+		msp1: msp@80124000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp1txrx_a_1_default>;
+			status = "okay";
+		};
+
+		msp2: msp@80117000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp2_a_1_default>;
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpiocontroller {
+				};
+
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		pinctrl {
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					/* Some boards set additional settings here */
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&lcd_default_mode>;
+			pinctrl-1 = <&lcd_sleep_mode>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
new file mode 100644
index 000000000..f8c0c1e6a
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the HREF520 version with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-db8520.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618-r3.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF520 and TVK1281618 UIB";
+	compatible = "st-ericsson,href520", "st-ericsson,u8500";
+
+	soc {
+		vmmci: regulator-gpio {
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
new file mode 100644
index 000000000..8ce6b723a
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				interrupt-parent = <&gpio2>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>;
+			};
+			bu21013_tp@5d {
+				interrupt-parent = <&gpio2>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
new file mode 100644
index 000000000..142f54755
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
new file mode 100644
index 000000000..115495de8
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
+ */
+
+#include "ste-href-ab8500.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	gpio_keys {
+		button@1 {
+			gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	soc {
+		/* Enable UART1 on this board */
+		uart@80121000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "ti,tps61052";
+				reg = <0x33>;
+			};
+
+			tc35892@42 {
+				compatible = "toshiba,tc35892";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35892_hrefprev60_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		spi@80002000 {
+			/*
+			 * On the first generation boards, this SSP/SPI port was connected
+			 * to the AB8500.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			cd-gpios  = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		pinctrl {
+			/* Set this up using hogs */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ipgpio_hrefprev60_mode>;
+
+			ssp0 {
+				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
+					hrefprev60_mux {
+						function = "ssp0";
+						groups = "ssp0_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+
+				};
+			};
+			sdi0 {
+				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
+				sdi0_default_mode: sdi0_default {
+					hrefprev60_mux {
+						function = "mc0";
+						groups = "mc0dat31dir_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+			tc35892 {
+				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
+					hrefprev60_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			ipgpio {
+				 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
+					hrefprev60_mux {
+						function = "ipgpio";
+						groups = "ipgpio0_c_1", "ipgpio1_c_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO6_AF6", "GPIO7_AG5";
+						ste,config = <&in_pu>;
+					};
+				 };
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
new file mode 100644
index 000000000..1316886e6
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>;
+			};
+			bu21013_tp@5d {
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+				touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+				reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
new file mode 100644
index 000000000..5d4b8245f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
new file mode 100644
index 000000000..05b4fbbba
--- /dev/null
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson AB
+ */
+
+#include "ste-href-ab8500.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Name the GPIO muxed rails on the HREF boards */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names =
+				     /* GPIO0,1 used for UART0 BT RX/TX */
+				     "", "",
+				     "UART_WAKE",
+				     "BT_WAKE",
+				     "",
+				     "SDMMC_1V8_3V_SEL",
+				     "FLASH_LED_SYNC (FLASH_CTRL_0)",
+				     "XENON_READY (FLASH_CTRL_1)",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "",
+				     "",
+				     "FLASH_LED_EN (FLASH_CTRL_3)",
+				     "", "",
+				     "", "", "", "", "",
+				     /* Used by UART2 (console) */
+				     "", "",
+				     "MAGNETOMETER_INT";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names =
+				     "MAGNETOMETER_DRDY",
+				     "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+				     "DISP1_RST",
+				     "DISP2_RST",
+				     "TOUCH_INT2",
+				     "LCD_VSI0_A",
+				     "LCD_VSI1_A",
+				     /* GPIO 70-77 used for ETM */
+				     "", "", "", "", "", "", "", "",
+				     /* GPIO 78-81 used for YCBCR */
+				     "", "", "", "",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2",
+				     "TOUCH_INT",
+				     "WLAN_ENA",
+				     "", "", "", "", "",
+				     "FORCE_SENSING_INT",
+				     "FORCE_SENSING_RESET",
+				     "", "",
+				     "SDMMC_CD";
+		};
+
+		gpio@8000e080 {
+			/* GPIOs 96 - 127 */
+			gpio-line-names = "",
+				     "FORCE_SENSING_WU",
+				     "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "",
+				     "DIPRO_INT", /* GPIO139 */
+				     "XSHUTDOWN_SECONDARY_SENSOR",
+				     "XSHUTDOWN_PRIMARY_SENSOR",
+				     "NFC_RST (NFC_CTRL_",
+				     "TOUCH_RST",
+				     "NFC_IRQ (NFC_CTRL_1)",
+				     "HAL_SW",
+				     "TOUCH_RST2",
+				     "", "",
+				     "VAUDIO_HF_EN", /* GPIO149 */
+				     "", "", "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "",
+				     "SDMMC_EN",
+				     "XENON_CHARGE (FLASH_CONTROL_5)",
+				     "GBF_ENA_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTN",
+				     "", "", "",
+				     "HDTV_RSTN",
+				     "", "", "",
+				     "", /* GPIO200 */
+				     "", "", "", "", "", "", "",
+				     /* GPIO208-216 used for WGBF_MC1 */
+				     "", "", "", "", "", "", "", "", "",
+				     "SW_FRONT_PROXIMITY", /* GPIO217 */
+				     "KPD_CTRL_INT", /* Keypad controller */
+				     "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "",
+				     "HSIT_ACWAKE0",
+				     "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			cd-gpios  = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		pinctrl {
+			/*
+			 * Set this up using hogs, as time goes by and as seems fit, these
+			 * can be moved over to being controlled by respective device.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ipgpio_hrefv60_mode>,
+				  <&etm_hrefv60_mode>,
+				  <&nahj_hrefv60_mode>,
+				  <&nfc_hrefv60_mode>,
+				  <&force_hrefv60_mode>,
+				  <&dipro_hrefv60_mode>,
+				  <&vaudio_hf_hrefv60_mode>,
+				  <&gbf_hrefv60_mode>,
+				  <&hdtv_hrefv60_mode>,
+				  <&gpios_hrefv60_mode>;
+
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					/* SD card detect GPIO pin, extend default state */
+					default_hrefv60_cfg1 {
+						pins = "GPIO95_E8";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					default_hrefv60_cfg2 {
+						pins = "GPIO169_D22";
+						ste,config = <&gpio_out_hi>;
+					};
+					/* VMMCI level-shifter voltage select */
+					default_hrefv60_cfg3 {
+						pins = "GPIO5_AG6";
+						ste,config = <&gpio_out_hi>;
+					};
+				};
+			};
+			ipgpio {
+				/*
+				 * XENON Flashgun on image processor GPIO (controlled from image
+				 * processor firmware), mux in these image processor GPIO lines 0
+				 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
+				 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
+				 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
+				 */
+				ipgpio_hrefv60_mode: ipgpio_hrefv60 {
+					hrefv60_mux {
+						function = "ipgpio";
+						groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
+					};
+					hrefv60_cfg1 {
+						pins = "GPIO6_AF6", "GPIO7_AG5";
+						ste,config = <&in_pu>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO21_AB3";
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg3 {
+						pins = "GPIO64_F3";
+						ste,config = <&out_lo>;
+					};
+				};
+			};
+			etm {
+				/*
+				 * Drive D19-D23 for the ETM PTM trace interface low,
+				 * (presumably pins are unconnected therefore grounded here,
+				 * the "other alt C1" setting enables these pins)
+				 */
+				etm_hrefv60_mode: etm_hrefv60 {
+					hrefv60_cfg1 {
+						pins =
+						"GPIO70_G5",
+						"GPIO71_G4",
+						"GPIO72_H4",
+						"GPIO73_H3",
+						"GPIO74_J3";
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			nahj {
+				nahj_hrefv60_mode: nahj_hrefv60 {
+					/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
+					hrefv60_cfg1 {
+						pins = "GPIO76_J2";
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO216_AG12";
+						ste,config = <&gpio_out_hi>;
+					};
+				 };
+			};
+			nfc {
+				nfc_hrefv60_mode: nfc_hrefv60 {
+					/* NFC ENA and RESET to low, pulldown IRQ line */
+					hrefv60_cfg1 {
+						pins =
+						"GPIO77_H1", /* NFC_ENA */
+						"GPIO142_C11"; /* NFC_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO144_B13"; /* NFC_IRQ */
+						ste,config = <&gpio_in_pd>;
+					};
+				 };
+			};
+			force {
+				force_hrefv60_mode: force_hrefv60 {
+					hrefv60_cfg1 {
+						pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
+						ste,config = <&gpio_in_pu>;
+					};
+					hrefv60_cfg2 {
+						pins =
+						"GPIO92_D6", /* FORCE_SENSING_RST */
+						"GPIO97_D9"; /* FORCE_SENSING_WU */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			dipro {
+				dipro_hrefv60_mode: dipro_hrefv60 {
+					hrefv60_cfg1 {
+						pins = "GPIO139_C9"; /* DIPRO_INT */
+						ste,config = <&gpio_in_pu>;
+					};
+				 };
+			};
+			vaudio_hf {
+				vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
+					/* Audio Amplifier HF enable GPIO */
+					hrefv60_cfg1 {
+						pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
+						ste,config = <&gpio_out_hi>;
+					};
+				 };
+			};
+			gbf {
+				gbf_hrefv60_mode: gbf_hrefv60 {
+					/*
+					 * GBF (GPS, Bluetooth, FM-radio) interface,
+					 * pull low to reset state
+					 */
+					hrefv60_cfg1 {
+						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			hdtv {
+				hdtv_hrefv60_mode: hdtv_hrefv60 {
+					/* MSP : HDTV INTERFACE GPIO line */
+					hrefv60_cfg1 {
+						pins = "GPIO192_AJ27";
+						ste,config = <&gpio_in_pd>;
+					};
+				 };
+			};
+			mcde {
+				lcd_hrefv60_mode: lcd_hrefv60 {
+					/*
+					 * Display Interface 1 uses GPIO 65 for RST (reset).
+					 * Display Interface 2 uses GPIO 66 for RST (reset).
+					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
+					 */
+					hrefv60_cfg1 {
+						pins ="GPIO65_F1";
+						ste,config = <&gpio_out_hi>;
+					};
+					hrefv60_cfg2 {
+						pins ="GPIO66_G3";
+						ste,config = <&gpio_out_lo>;
+					};
+				};
+			};
+			gpios {
+				/* Dangling GPIO pins */
+				gpios_hrefv60_mode: gpios_hrefv60 {
+					default_cfg1 {
+						/* Normally UART1 RXD, now dangling */
+						pins = "GPIO4_AH6";
+						ste,config = <&in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
new file mode 100644
index 000000000..41ed21a4f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ST Microelectronics Nomadik NHK8815 board
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+	model = "Nomadik STN8815NHK";
+	compatible = "st,nomadik-nhk-15";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		stmpe-i2c0 = &stmpe0;
+		stmpe-i2c1 = &stmpe1;
+	};
+
+	pinctrl {
+		uart0 {
+			uart0_nhk_mode: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					groups = "u0txrx_a_1", "u0ctsrts_a_1";
+				};
+			};
+		};
+
+		stmpe2401_1 {
+			stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
+				nhk_cfg1 {
+					pins = "GPIO76_B20"; // IRQ line
+					ste,input = <0>;
+				};
+				nhk_cfg2 {
+					pins = "GPIO77_B8"; // reset line
+					ste,output = <1>;
+				};
+			};
+		};
+		stmpe2401_2 {
+			stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
+				nhk_cfg1 {
+					pins = "GPIO78_A8"; // IRQ line
+					ste,input = <0>;
+				};
+				nhk_cfg2 {
+					pins = "GPIO79_C9"; // reset line
+					ste,output = <1>;
+				};
+			};
+		};
+		lis3lv02dl {
+			lis3lv02dl_nhk_mode: lis3lv02dl_nhk {
+				nhk_cfg1 {
+					pins = "GPIO82_C10"; // IRQ line
+					ste,input = <0>;
+				};
+			};
+		};
+	};
+	src@101e0000 {
+		/* These chrystal outputs are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
+	/* This is where the interrupt is routed on the NHK-15 debug board */
+	external-bus@34000000 {
+		compatible = "simple-bus";
+		reg = <0x34000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x34000000 0x1000000>;
+		ethernet@300 {
+			compatible = "smsc,lan91c111";
+			reg = <0x300 0x0fd00>;
+			reg-io-width = <2>;
+			reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&stmpe_gpio44>;
+			interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	i2c0 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			interrupt-parent = <&gpio2>;
+			interrupts = <18 IRQ_TYPE_EDGE_RISING>; // GPIO 82
+			pinctrl-0 = <&lis3lv02dl_nhk_mode>;
+			pinctrl-names = "default";
+			reg = <0x1d>;
+		};
+		stmpe0: stmpe2401@43 {
+			compatible = "st,stmpe2401";
+			reg = <0x43>;
+			reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
+			interrupt-parent = <&gpio2>;
+			interrupt-controller;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&stmpe2401_1_nhk_mode>;
+			stmpe_gpio43: stmpe_gpio {
+				compatible = "st,stmpe-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				/* Some pins in alternate functions */
+				st,norequest-mask = <0xf0f002>;
+			};
+			stmpe_keypad {
+				compatible = "st,stmpe-keypad";
+				debounce-interval = <64>;
+				st,scan-count = <8>;
+				st,no-autorepeat;
+				keypad,num-rows = <8>;
+				keypad,num-columns = <8>;
+				linux,keymap = <0x00020072 // Vol down
+						0x00030073 // Vol up
+						0x0100009e // Back
+						0x010100e3 // TV out
+						0x01020098 // Lock
+						0x0103013b // Start
+						0x020000a3 // Next
+						0x020100a4 // Play
+						0x020200a5 // Prev
+						0x02030160 // OK
+						0x03000069 // Left
+						0x0301006a // Right
+						0x03020067 // Up
+						0x0303006c>; // Down
+			};
+			stmpe0_pwm: stmpe_pwm {
+				compatible = "st,stmpe-pwm";
+				#pwm-cells = <2>;
+			};
+		};
+		stmpe1: stmpe2401@44 {
+			compatible = "st,stmpe2401";
+			reg = <0x44>;
+			reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
+			interrupt-parent = <&gpio2>;
+			interrupt-controller;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&stmpe2401_2_nhk_mode>;
+			stmpe_gpio44: stmpe_gpio {
+				compatible = "st,stmpe-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				/*
+				 * This will turn off SATA so that MMC/SD
+				 * can thrive
+				 */
+				mmcsd-gpio {
+					gpio-hog;
+					gpios = <2 0x0>;
+					output-low;
+					line-name = "SATA EN";
+				};
+			};
+		};
+	};
+
+	amba {
+		clcd@10120000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&clcd_24bit_mux>;
+			port {
+				nomadik_clcd: endpoint {
+					remote-endpoint = <&nomadik_clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+				};
+			};
+
+		};
+
+		/* Activate RX/TX and CTS/RTS on UART 0 */
+		uart0: uart@101fd000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_nhk_mode>;
+			status = "okay";
+		};
+		mmcsd: sdi@101f6000 {
+			cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * As we're dealing with 3wire SPI, we only define SCK
+		 * and MOSI (in the spec MOSI is called "SDA").
+		 */
+		gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		/*
+		 * WVGA connector 21
+		 * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
+		 * with TPO touch screen.
+		  */
+		panel: display@0 {
+			/*
+			 * The TPO display driver is connected to a
+			 * 5.7" OSD OSD057VA01CT TFT display.
+			 */
+			compatible = "tpo,tpg110";
+			reg = <0>;
+			spi-3wire;
+			/* 320 ns min period ~= 3 MHz */
+			spi-max-frequency = <3000000>;
+			/* Width and height from the OSD data sheet */
+			width-mm = <116>;
+			height-mm = <87>;
+			grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+			backlight = <&bl>;
+
+			port {
+				nomadik_clcd_panel: endpoint {
+					remote-endpoint = <&nomadik_clcd>;
+				};
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&stmpe0_pwm 0 500000>;
+		pwm-names = "backlight";
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 000000000..bfdb5d9a0
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 ST-Ericsson
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+	in_nopull: in_nopull {
+		ste,input = <INPUT_NOPULL>;
+	};
+
+	in_pu: input_pull_up {
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	in_pd: input_pull_down {
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	out_hi: output_high {
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	out_lo: output_low {
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_in_nopull: gpio_input_nopull {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_NOPULL>;
+	};
+
+	gpio_in_pu: gpio_input_pull_up {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	gpio_in_pd: gpio_input_pull_down {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	gpio_out_lo: gpio_output_low {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_out_hi: gpio_output_high {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	slpm_pdis: slpm_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis: slpm_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_in_pu: slpm_in_pu {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_in_pdis: slpm_in_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_out_lo: slpm_out_lo {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi: slpm_out_hi {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo_pdis: slpm_out_lo_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis: in_wkup_pdis {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis_en: in_wkup_pdis_en {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	out_lo_wkup_pdis: out_lo_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_hi_wkup_pdis: out_hi_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_wkup_pdis: out_wkup_pdis {
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
new file mode 100644
index 000000000..4445446fa
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+	model = "Calao Systems USB-S8815";
+	compatible = "calaosystems,usb-s8815";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	gpio3: gpio@101e7000 {
+		/* This hog will bias the MMC/SD card detect line */
+		mmcsd-gpio {
+			gpio-hog;
+			gpios = <16 0x0>;
+			output-low;
+			line-name = "card detect bias";
+		};
+	};
+
+	src@101e0000 {
+		/* These chrystal drivers are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
+	pinctrl {
+		/* Hog CD pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&cd_default_mode>;
+
+		uart0 {
+			/* Only use RX/TX pins */
+			uart0_s8815_mode: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					groups = "u0txrx_a_1";
+				};
+			};
+		};
+		mmcsd-cd {
+			cd_default_mode: cd_default {
+				cd_default_cfg1 {
+					/* CD input GPIO */
+					pins = "GPIO111_H21";
+					ste,input = <0>;
+				};
+				cd_default_cfg2 {
+					/* CD GPIO biasing */
+					pins = "GPIO112_J21";
+					ste,output = <0>;
+				};
+			};
+		};
+		gpioi2c {
+			gpioi2c_default_mode: gpioi2c_default {
+				gpioi2c_default_cfg {
+					pins = "GPIO73_C21", "GPIO74_C20";
+					ste,input = <0>;
+				};
+			};
+		};
+		user-led {
+			user_led_default_mode: user_led_default {
+				user_led_default_cfg {
+					pins = "GPIO2_C5";
+					ste,output = <1>;
+				};
+			};
+		};
+		user-button {
+			user_button_default_mode: user_button_default {
+				user_button_default_cfg {
+					pins = "GPIO3_A4";
+					ste,input = <0>;
+				};
+			};
+		};
+	};
+
+	/* Ethernet */
+	external-bus@34000000 {
+		compatible = "simple-bus";
+		reg = <0x34000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x34000000 0x1000000>;
+		ethernet@300 {
+			compatible = "smsc,lan91c111";
+			reg = <0x300 0x0fd00>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	i2c1 {
+		lis3lv02dl@1d {
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			reg = <0x1d>;
+		};
+	};
+
+	/* GPIO I2C connected to the USB portions of the STw4811 only */
+	gpio-i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gpio2 10 0>, /* sda */
+			<&gpio2 9 0>; /* scl */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpioi2c_default_mode>;
+
+		stw4811@2d {
+			   compatible = "st,stw4811-usb";
+			   reg = <0x2d>;
+		};
+	};
+
+
+	amba {
+		/* Activate RXTX on UART 0 */
+		uart0: uart@101fd000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_s8815_mode>;
+			status = "okay";
+		};
+		/* Configure card detect for the uSD slot */
+		mmcsd: sdi@101f6000 {
+			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* The user LED on the board is set up to be used for heartbeat */
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "user_led";
+			gpios = <&gpio0 2 0x1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_default_mode>;
+		};
+	};
+
+	/* User key mapped in as "escape" */
+	gpio-keys {
+		compatible = "gpio-keys";
+		user-button {
+			label = "user_button";
+			gpios = <&gpio0 3 0x1>;
+			linux,code = <1>; /* KEY_ESC */
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_button_default_mode>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
new file mode 100644
index 000000000..42abea3ea
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>,
+		    <0x08000000 0x04000000>;
+	};
+
+	L2: cache-controller {
+		compatible = "arm,l210-cache";
+		reg = <0x10210000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <30>;
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <131072>;
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		/* At full speed latency must be >=2 */
+		arm,tag-latency = <8>;
+		arm,data-latency = <8 8>;
+		arm,dirty-latency = <8>;
+	};
+
+	mtu0: mtu@101e2000 {
+		/* Nomadik system timer */
+		compatible = "st,nomadik-mtu";
+		reg = <0x101e2000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <4>;
+		clocks = <&timclk>, <&pclk>;
+		clock-names = "timclk", "apb_pclk";
+	};
+
+	mtu1: mtu@101e3000 {
+		/* Secondary timer */
+		reg = <0x101e3000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <5>;
+		clocks = <&timclk>, <&pclk>;
+		clock-names = "timclk", "apb_pclk";
+	};
+
+	gpio0: gpio@101e4000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e4000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <0>;
+		gpio-ranges = <&pinctrl 0 0 32>;
+		clocks = <&pclk>;
+	};
+
+	gpio1: gpio@101e5000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e5000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <1>;
+		gpio-ranges = <&pinctrl 0 32 32>;
+		clocks = <&pclk>;
+	};
+
+	gpio2: gpio@101e6000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e6000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <8>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <2>;
+		gpio-ranges = <&pinctrl 0 64 32>;
+		clocks = <&pclk>;
+	};
+
+	gpio3: gpio@101e7000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e7000 0x80>;
+		ngpio = <28>;
+		interrupt-parent = <&vica>;
+		interrupts = <9>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <3>;
+		gpio-ranges = <&pinctrl 0 96 28>;
+		clocks = <&pclk>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "stericsson,stn8815-pinctrl";
+		nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
+		/* Pin configurations */
+		uart1 {
+			uart1_default_mux: uart1_mux {
+				u1_default_mux {
+					function = "u1";
+					groups = "u1_a_1";
+				};
+			};
+		};
+		mmcsd {
+			mmcsd_default_mux: mmcsd_mux {
+				mmcsd_default_mux {
+					function = "mmcsd";
+					groups = "mmcsd_a_1", "mmcsd_b_1";
+				};
+			};
+			mmcsd_default_mode: mmcsd_default {
+				mmcsd_default_cfg1 {
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
+				};
+			};
+		};
+		i2c0 {
+			i2c0_default_mux: i2c0_mux {
+				i2c0_default_mux {
+					function = "i2c0";
+					groups = "i2c0_a_1";
+				};
+			};
+			i2c0_default_mode: i2c0_default {
+				i2c0_default_cfg {
+					pins = "GPIO62_D3", "GPIO63_D2";
+					ste,input = <0>;
+				};
+			};
+		};
+		i2c1 {
+			i2c1_default_mux: i2c1_mux {
+				i2c1_default_mux {
+					function = "i2c1";
+					groups = "i2c1_a_1";
+				};
+			};
+			i2c1_default_mode: i2c1_default {
+				i2c1_default_cfg {
+					pins = "GPIO53_L4", "GPIO54_L3";
+					ste,input = <0>;
+				};
+			};
+		};
+		clcd {
+			/*
+			 * This should be activated to use the additional
+			 * 8 lines for bits 16 thru 23 from the CLCD block.
+			 */
+			clcd_24bit_mux: clcd_mux {
+				clcd_24bit_mux {
+					function = "clcd";
+					groups = "clcd_16_23_b_1";
+				};
+			};
+		};
+	};
+
+	/* Power Management Unit */
+	pmu: pmu@101e9000 {
+		compatible = "stericsson,nomadik-pmu", "syscon";
+		reg = <0x101e0000 0x1000>;
+	};
+
+	src: src@101e0000 {
+		compatible = "stericsson,nomadik-src";
+		reg = <0x101e0000 0x1000>;
+
+		/*
+		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+		 * that is parent of TIMCLK, PLL1 and PLL2
+		 */
+		mxtal: mxtal@19.2M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+		};
+
+		/*
+		 * The 2.4 MHz TIMCLK reference clock is active at
+		 * boot time, this is actually the MXTALCLK @19.2 MHz
+		 * divided by 8. This clock is used by the timers and
+		 * watchdog. See page 105 ff.
+		 */
+		timclk: timclk@2.4M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+		pll1: pll1@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* HCLK divides the PLL1 with 1,2,3 or 4 */
+		hclk: hclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-hclk-clock";
+			clocks = <&pll1>;
+		};
+		/* The PCLK domain uses HCLK right off */
+		pclk: pclk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&hclk>;
+		};
+
+		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
+		pll2: pll2@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <2>;
+			clocks = <&mxtal>;
+		};
+		clk216: clk216@216M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk108: clk108@108M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&clk216>;
+		};
+		clk72: clk72@72M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <12>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk48: clk48@48M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <18>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk27: clk27@27M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&clk108>;
+		};
+
+		/* This apparently exists as well */
+		ulpiclk: ulpiclk@60M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <60000000>;
+		};
+
+		/*
+		 * IP AMBA bus clocks, driving the bus side of the
+		 * peripheral clocking, clock gates.
+		 */
+
+		hclkdma0: hclkdma0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <0>;
+			clocks = <&hclk>;
+		};
+		hclksmc: hclksmc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <1>;
+			clocks = <&hclk>;
+		};
+		hclksdram: hclksdram@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <2>;
+			clocks = <&hclk>;
+		};
+		hclkdma1: hclkdma1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <3>;
+			clocks = <&hclk>;
+		};
+		hclkclcd: hclkclcd@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <4>;
+			clocks = <&hclk>;
+		};
+		pclkirda: pclkirda@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <5>;
+			clocks = <&pclk>;
+		};
+		pclkssp: pclkssp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <6>;
+			clocks = <&pclk>;
+		};
+		pclkuart0: pclkuart0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <7>;
+			clocks = <&pclk>;
+		};
+		pclksdi: pclksdi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <8>;
+			clocks = <&pclk>;
+		};
+		pclki2c0: pclki2c0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <9>;
+			clocks = <&pclk>;
+		};
+		pclki2c1: pclki2c1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <10>;
+			clocks = <&pclk>;
+		};
+		pclkuart1: pclkuart1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <11>;
+			clocks = <&pclk>;
+		};
+		pclkmsp0: pclkmsp0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <12>;
+			clocks = <&pclk>;
+		};
+		hclkusb: hclkusb@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <13>;
+			clocks = <&hclk>;
+		};
+		hclkdif: hclkdif@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <14>;
+			clocks = <&hclk>;
+		};
+		hclksaa: hclksaa@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <15>;
+			clocks = <&hclk>;
+		};
+		hclksva: hclksva@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <16>;
+			clocks = <&hclk>;
+		};
+		pclkhsi: pclkhsi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <17>;
+			clocks = <&pclk>;
+		};
+		pclkxti: pclkxti@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <18>;
+			clocks = <&pclk>;
+		};
+		pclkuart2: pclkuart2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <19>;
+			clocks = <&pclk>;
+		};
+		pclkmsp1: pclkmsp1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <20>;
+			clocks = <&pclk>;
+		};
+		pclkmsp2: pclkmsp2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <21>;
+			clocks = <&pclk>;
+		};
+		pclkowm: pclkowm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <22>;
+			clocks = <&pclk>;
+		};
+		hclkhpi: hclkhpi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <23>;
+			clocks = <&hclk>;
+		};
+		pclkske: pclkske@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <24>;
+			clocks = <&pclk>;
+		};
+		pclkhsem: pclkhsem@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <25>;
+			clocks = <&pclk>;
+		};
+		hclk3d: hclk3d@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <26>;
+			clocks = <&hclk>;
+		};
+		hclkhash: hclkhash@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <27>;
+			clocks = <&hclk>;
+		};
+		hclkcryp: hclkcryp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <28>;
+			clocks = <&hclk>;
+		};
+		pclkmshc: pclkmshc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <29>;
+			clocks = <&pclk>;
+		};
+		hclkusbm: hclkusbm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <30>;
+			clocks = <&hclk>;
+		};
+		hclkrng: hclkrng@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <31>;
+			clocks = <&hclk>;
+		};
+
+		/* IP kernel clocks */
+		clcdclk: clcdclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <36>;
+			clocks = <&clk72 &clk48>;
+		};
+		irdaclk: irdaclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <37>;
+			clocks = <&clk48>;
+		};
+		sspiclk: sspiclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <38>;
+			clocks = <&clk48>;
+		};
+		uart0clk: uart0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <39>;
+			clocks = <&clk48>;
+		};
+		sdiclk: sdiclk@48M {
+			/* Also called MCCLK in some documents */
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <40>;
+			clocks = <&clk48>;
+		};
+		i2c0clk: i2c0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <41>;
+			clocks = <&clk48>;
+		};
+		i2c1clk: i2c1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <42>;
+			clocks = <&clk48>;
+		};
+		uart1clk: uart1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <43>;
+			clocks = <&clk48>;
+		};
+		mspclk0: mspclk0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <44>;
+			clocks = <&clk48>;
+		};
+		usbclk: usbclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <45>;
+			clocks = <&clk48>; /* 48 MHz not ULPI */
+		};
+		difclk: difclk@72M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <46>;
+			clocks = <&clk72>;
+		};
+		ipi2cclk: ipi2cclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <47>;
+			clocks = <&clk48>; /* Guess */
+		};
+		ipbmcclk: ipbmcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <48>;
+			clocks = <&clk48>; /* Guess */
+		};
+		hsiclkrx: hsiclkrx@216M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <49>;
+			clocks = <&clk216>;
+		};
+		hsiclktx: hsiclktx@108M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <50>;
+			clocks = <&clk108>;
+		};
+		uart2clk: uart2clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <51>;
+			clocks = <&clk48>;
+		};
+		mspclk1: mspclk1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <52>;
+			clocks = <&clk48>;
+		};
+		mspclk2: mspclk2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <53>;
+			clocks = <&clk48>;
+		};
+		owmclk: owmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <54>;
+			clocks = <&clk48>; /* Guess */
+		};
+		skeclk: skeclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <56>;
+			clocks = <&clk48>; /* Guess */
+		};
+		x3dclk: x3dclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <58>;
+			clocks = <&clk48>; /* Guess */
+		};
+		pclkmsp3: pclkmsp3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <59>;
+			clocks = <&pclk>;
+		};
+		mspclk3: mspclk3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <60>;
+			clocks = <&clk48>;
+		};
+		mshcclk: mshcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <61>;
+			clocks = <&clk48>; /* Guess */
+		};
+		usbmclk: usbmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <62>;
+			/* Stated as "48 MHz not ULPI clock" */
+			clocks = <&clk48>;
+		};
+		rngcclk: rngcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <63>;
+			clocks = <&clk48>; /* Guess */
+		};
+	};
+
+	/* A NAND flash of 128 MiB */
+	fsmc: flash@40000000 {
+		compatible = "stericsson,fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10100000 0x1000>,	/* FSMC Register*/
+			<0x40000000 0x2000>,	/* NAND Base DATA */
+			<0x41000000 0x2000>,	/* NAND Base ADDR */
+			<0x40800000 0x2000>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		clocks = <&hclksmc>;
+		status = "okay";
+
+		partition@0 {
+		label = "X-Loader(NAND)";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "MemInit(NAND)";
+			reg = <0x40000 0x40000>;
+		};
+		partition@80000 {
+			label = "BootLoader(NAND)";
+			reg = <0x80000 0x200000>;
+		};
+		partition@280000 {
+			label = "Kernel zImage(NAND)";
+			reg = <0x280000 0x300000>;
+		};
+		partition@580000 {
+			label = "Root Filesystem(NAND)";
+			reg = <0x580000 0x1600000>;
+		};
+		partition@1b80000 {
+			label = "User Filesystem(NAND)";
+			reg = <0x1b80000 0x6480000>;
+		};
+	};
+
+	/* I2C0 connected to the STw4811 power management chip */
+	i2c0 {
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f8000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <20>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&i2c0clk>, <&pclki2c0>;
+		clock-names = "mclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+
+		stw4811@2d {
+			compatible = "st,stw4811";
+			reg = <0x2d>;
+			vmmc_regulator: vmmc {
+				compatible = "st,stw481x-vmmc";
+				regulator-name = "VMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	/* I2C1 connected to various sensors */
+	i2c1 {
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f7000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <21>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&i2c1clk>, <&pclki2c1>;
+		clock-names = "mclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+
+		camera@2d {
+			   compatible = "st,camera";
+			   reg = <0x10>;
+		};
+		stw5095@1a {
+			   compatible = "st,stw5095";
+			   reg = <0x1a>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clcd@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupt-names = "combined";
+			interrupts = <14>;
+			interrupt-parent = <&vica>;
+			clocks = <&clcdclk>, <&hclkclcd>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		vica: interrupt-controller@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x20>;
+		};
+
+		vicb: interrupt-controller@10140020 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140020 0x20>;
+		};
+
+		uart0: uart@101fd000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fd000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <12>;
+			clocks = <&uart0clk>, <&pclkuart0>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+			dmas = <&dmac0 14 1>,
+			       <&dmac0 15 1>;
+			dma-names = "rx", "tx";
+		};
+
+		uart1: uart@101fb000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fb000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <17>;
+			clocks = <&uart1clk>, <&pclkuart1>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_default_mux>;
+			dmas = <&dmac1 22 1>,
+			       <&dmac1 23 1>;
+			dma-names = "rx", "tx";
+		};
+
+		uart2: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <28>;
+			clocks = <&uart2clk>, <&pclkuart2>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+			dmas = <&dmac1 30 1>,
+			       <&dmac1 31 1>;
+			dma-names = "rx", "tx";
+		};
+
+		rng: rng@101b0000 {
+			compatible = "arm,primecell";
+			reg = <0x101b0000 0x1000>;
+			clocks = <&rngcclk>, <&hclkrng>;
+			clock-names = "rng", "apb_pclk";
+		};
+
+		rtc: rtc@101e8000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			interrupt-parent = <&vica>;
+			interrupts = <10>;
+		};
+
+		mmcsd: sdi@101f6000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x101f6000 0x1000>;
+			clocks = <&sdiclk>, <&pclksdi>;
+			clock-names = "mclk", "apb_pclk";
+			interrupt-parent = <&vica>;
+			interrupts = <22>;
+			max-frequency = <400000>;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+			vmmc-supply = <&vmmc_regulator>;
+		};
+
+		dmac0: dma-controller@10130000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <15>;
+			clocks = <&hclkdma0>;
+			clock-names = "apb_pclk";
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+		dmac1: dma-controller@10150000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x10150000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <13>;
+			clocks = <&hclkdma1>;
+			clock-names = "apb_pclk";
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
new file mode 100644
index 000000000..f6e0d71f6
--- /dev/null
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 ST-Ericsson AB
+ */
+
+/dts-v1/;
+#include "ste-db9500.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
+
+/ {
+	model = "Calao Systems Snowball platform with device tree";
+	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	en_3v3_reg: en_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+		gpio = <&ab8500_gpio 25 0x4>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <2>;
+			label = "userpb";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <3>;
+			label = "extkb1";
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <4>;
+			label = "extkb2";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <5>;
+			label = "extkb3";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <6>;
+			label = "extkb4";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpioled_snowball_mode>;
+		used-led {
+			label = "user_led";
+			gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		/* Name the GPIO muxed rails on the Snowball board */
+		gpio@8012e000 {
+			/* GPIOs 0 - 31 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "",
+				     "AP_GPIO31";
+		};
+
+		gpio@8012e080 {
+			/* GPIOs 32 - 63 */
+			gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e000 {
+			/* GPIOs 64 - 95 */
+			gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e100 {
+			/* GPIOs 128 - 159 */
+			gpio-line-names = "", "", "", "", "", "", "", "",
+				     "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+				     "USR_LED", "", "", "", "", "", "",
+				     "", "", "AP_GPIO151", "AP_GPIO152",
+				     "", "", "", "", "", "", "";
+		};
+
+		gpio@8000e180 {
+			/* GPIOs 160 - 191 */
+			gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+				     "ACCELEROMETER_INT1_RDY",
+				     "ACCELEROMETER_INT2", "MAG_DRDY",
+				     "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+				     "GYRO_INT", "UART_WAKE", "GBF_RESET",
+				     "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		gpio@8011e000 {
+			/* GPIOs 192 - 223 */
+			gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+				     "", "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "", "",
+				     "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+				     "MMC_CD", "", "", "", "", "";
+		};
+
+		gpio@8011e080 {
+			/* GPIOs 224 - 255 */
+			gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "",
+				     "", "", "", "", "", "", "", "";
+		};
+
+		msp0: msp@80123000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
+			status = "okay";
+		};
+
+		msp1: msp@80124000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp1txrx_a_1_default>;
+			status = "okay";
+		};
+
+		msp2: msp@80117000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp2_a_1_default>;
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		external-bus@50000000 {
+			status = "okay";
+
+			ethernet@0 {
+				compatible = "smsc,lan9115";
+				reg = <0 0x10000>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+				interrupt-parent = <&gpio4>;
+				vdd33a-supply = <&en_3v3_reg>;
+				vddvario-supply = <&db8500_vape_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&eth_snowball_mode>;
+
+				reg-shift = <1>;
+				reg-io-width = <2>;
+				smsc,force-internal-phy;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+
+				clocks = <&prcc_pclk 3 0>;
+			};
+		};
+
+		/* ST6G3244ME level translator for 1.8/2.9 V */
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			/* GPIO228 SD_SEL */
+			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+			/* GPIO217 MMC_EN */
+			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+
+			/* GPIO218 MMC_CD */
+			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		// Unused PoP eMMC - register and put it to sleep by default */
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* This UART is unused and thus left disabled */
+		uart@80121000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
+		};
+
+		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_snowball_mode>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+					     <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
+			};
+			lsm303dlh@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlh-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_snowball_mode>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
+			};
+			l3g4200d@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				st,drdy-int-pin = <2>;
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_snowball_mode>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+					     <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+			};
+			lsp001wm@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
+		};
+
+		spi@80002000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_snowball_mode>;
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpiocontroller {
+					/*
+					 * AB8500 GPIOs are numbered starting from 1, so the first
+					 * index 0 is what in the datasheet is called "GPIO1", and
+					 * the second is "GPIO2" and so forth. Confusingly, the
+					 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+					 * while later naming "GPIO4" as "PM_GPIO4".
+					 */
+					gpio-line-names = "", /* AB8500 GPIO1 */
+						     "PM_GPIO1", /* AB8500 GPIO2 */
+						     "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+						     "PM_GPIO4", /* AB8500 GPIO4 */
+						     "", "", "", "", "", "", "", "", "", "", "",
+						     "EN_3V6", /* AB8500 GPIO16 */
+						     "", "", "", "" ,"", "", "", "", "",
+						     "EN_3V3", /* AB8500 GPIO26 */
+						     "", "", "", "", "", "", "", "", "", "", "", "", "",
+						     "PM_GPIO40", /* AB8500 GPIO40 */
+						     "PM_GPIO41", /* AB8500 GPIO41 */
+						     "PM_GPIO42"; /* AB8500 GPIO42 */
+				};
+
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ext_regulators: ab8500-ext-regulators {
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-name = "ab8500-ext-supply1";
+					};
+
+					ab8500_ext2_reg_reg: ab8500_ext2 {
+						regulator-name = "ab8500-ext-supply2";
+					};
+
+					ab8500_ext3_reg_reg: ab8500_ext3 {
+						regulator-name = "ab8500-ext-supply3";
+					};
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		pinctrl {
+			/*
+			 * Set this up using hogs, as time goes by and as seems fit, these
+			 * can be moved over to being controlled by respective device.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gbf_snowball_mode>,
+				  <&wlan_snowball_mode>;
+
+			ethernet {
+				/*
+				 * Mux in "SM" which is used for the
+				 * SMSC911x Ethernet adapter
+				 */
+				eth_snowball_mode: eth_snowball {
+					snowball_mux {
+						function = "sm";
+						groups = "sm_b_1";
+					};
+					/* LAN IRQ pin */
+					snowball_cfg1 {
+						pins = "GPIO140_B11";
+						ste,config = <&in_nopull>;
+					};
+					/* LAN reset pin */
+					snowball_cfg2 {
+						pins = "GPIO141_C12";
+						ste,config = <&gpio_out_hi>;
+					};
+
+				};
+			};
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					snowball_mux {
+						function = "mc0";
+						/* Add the DAT31 pin even if it is not really used */
+						groups = "mc0dat31dir_a_1";
+					};
+					snowball_cfg1 {
+						pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+					/* SD card detect GPIO pin, extend default state */
+					snowball_cfg2 {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* VMMCI level-shifter enable */
+					snowball_cfg3 {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_out_hi>;
+					};
+					/* VMMCI level-shifter voltage select */
+					snowball_cfg4 {
+						pins = "GPIO228_AJ6";
+						ste,config = <&gpio_out_hi>;
+					};
+				};
+			};
+			ssp0 {
+				ssp0_snowball_mode: ssp0_snowball_default {
+					snowball_mux {
+						function = "ssp0";
+						groups = "ssp0_a_1";
+					};
+					snowball_cfg1 {
+						pins = "GPIO144_B13"; /* FRM */
+						ste,config = <&gpio_out_hi>;
+					};
+					snowball_cfg2 {
+						pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+					snowball_cfg3 {
+						pins =
+						"GPIO146_D13", /* TXD */
+						"GPIO143_D12"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+
+				};
+			};
+			gpio_led {
+				gpioled_snowball_mode: gpioled_default {
+					snowball_cfg1 {
+						pins = "GPIO142_C11";
+						ste,config = <&gpio_out_hi>;
+					};
+
+				};
+			};
+			accelerometer {
+				accel_snowball_mode: accel_snowball {
+					/* Accelerometer lines */
+					snowball_cfg1 {
+						pins =
+						"GPIO163_C20", /* ACCEL_IRQ1 */
+						"GPIO164_B21"; /* ACCEL_IRQ2 */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			gyro {
+				gyro_snowball_mode: gyro_snowball {
+					snowball_cfg1 {
+						pins =
+						"GPIO166_A22", /* DRDY */
+						"GPIO169_D22"; /* INT */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_snowball_mode: magneto_snowball {
+					snowball_cfg1 {
+						pins = "GPIO165_C21"; /* MAG_DRDY */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			gbf {
+				gbf_snowball_mode: gbf_snowball {
+					/*
+					 * GBF (GPS, Bluetooth, FM-radio) interface,
+					 * pull low to reset state
+					 */
+					snowball_cfg1 {
+						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			wlan {
+				wlan_snowball_mode: wlan_snowball {
+					/*
+					 * Activate this mode with the WLAN chip.
+					 * These are plain GPIO pins used by WLAN
+					 */
+					snowball_cfg1 {
+						pins =
+						"GPIO161_D21", /* WLAN_PMU_EN */
+						"GPIO215_AH13"; /* WLAN_ENA */
+						ste,config = <&gpio_out_lo>;
+					};
+					snowball_cfg2 {
+						pins = "GPIO216_AG12"; /* WLAN_IRQ */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&lcd_default_mode>;
+			pinctrl-1 = <&lcd_sleep_mode>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
new file mode 100644
index 000000000..f4e7660fe
--- /dev/null
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ST-Ericsson U300 Machine and SoC
+ */
+
+/dts-v1/;
+
+/ {
+	model = "ST-Ericsson U300";
+	compatible = "stericsson,u300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+        };
+
+	memory {
+		device_type = "memory";
+		reg = <0x48000000 0x03c00000>;
+	};
+
+	s365 {
+		compatible = "stericsson,s365";
+		vana15-supply = <&ab3100_ldo_d_reg>;
+		syscon = <&syscon>;
+	};
+
+	syscon: syscon@c0011000 {
+		compatible = "stericsson,u300-syscon", "syscon";
+		reg = <0xc0011000 0x1000>;
+		clk32: app_32_clk@32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+		pll13: pll13@13M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+		/* Slow bridge clocks under PLL13 */
+		slow_clk: slow_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <0>;
+			clocks = <&pll13>;
+		};
+		uart0_clk: uart0_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <1>;
+			clocks = <&slow_clk>;
+		};
+		gpio_clk: gpio_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <4>;
+			clocks = <&slow_clk>;
+		};
+		rtc_clk: rtc_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <6>;
+			clocks = <&slow_clk>;
+		};
+		apptimer_clk: app_tmr_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <7>;
+			clocks = <&slow_clk>;
+		};
+		acc_tmr_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <8>;
+			clocks = <&slow_clk>;
+		};
+		pll208: pll208@208M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+		app208: app_208_clk@208M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		cpu_clk@208M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <3>;
+			clocks = <&app208>;
+		};
+		app104: app_104_clk@104M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		semi_clk@104M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <9>;
+			clocks = <&app104>;
+		};
+		app52: app_52_clk@52M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		/* AHB subsystem clocks */
+		ahb_clk: ahb_subsys_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <10>;
+			clocks = <&app52>;
+		};
+		intcon_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <12>;
+			clocks = <&ahb_clk>;
+		};
+		emif_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <5>;
+			clocks = <&ahb_clk>;
+		};
+		dmac_clk: dmac_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <4>;
+			clocks = <&app52>;
+		};
+		fsmc_clk: fsmc_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <6>;
+			clocks = <&app52>;
+		};
+		xgam_clk: xgam_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <8>;
+			clocks = <&app52>;
+		};
+		app26: app_26_clk@26M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&app52>;
+		};
+		/* Fast bridge  clocks */
+		fast_clk: fast_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <0>;
+			clocks = <&app26>;
+		};
+		i2c0_clk: i2c0_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <1>;
+			clocks = <&fast_clk>;
+		};
+		i2c1_clk: i2c1_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <2>;
+			clocks = <&fast_clk>;
+		};
+		mmc_pclk: mmc_p_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <5>;
+			clocks = <&fast_clk>;
+		};
+		mmc_mclk: mmc_mclk {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-mclk";
+			clocks = <&mmc_pclk>;
+		};
+		spi_clk: spi_p_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <6>;
+			clocks = <&fast_clk>;
+		};
+	};
+
+	timer: timer@c0014000 {
+		compatible = "stericsson,u300-apptimer";
+		reg = <0xc0014000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <24 25 26 27>;
+		clocks = <&apptimer_clk>;
+	};
+
+	gpio: gpio@c0016000 {
+		compatible = "stericsson,gpio-coh901";
+		reg = <0xc0016000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <0 1 2 18 21 22 23>;
+		clocks = <&gpio_clk>;
+		interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
+				"gpio4", "gpio5", "gpio6";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pinctrl: pinctrl@c0011000 {
+		compatible = "stericsson,pinctrl-u300";
+		reg = <0xc0011000 0x1000>;
+	};
+
+	watchdog: watchdog@c0012000 {
+		compatible = "stericsson,coh901327";
+		reg = <0xc0012000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <3>;
+		clocks = <&clk32>;
+	};
+
+	rtc: rtc@c0017000 {
+		compatible = "stericsson,coh901331";
+		reg = <0xc0017000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <10>;
+		clocks = <&rtc_clk>;
+	};
+
+	dmac: dma-controller@c00020000 {
+		compatible = "stericsson,coh901318";
+		reg = <0xc0020000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <2>;
+		#dma-cells = <1>;
+		dma-channels = <40>;
+		clocks = <&dmac_clk>;
+	};
+
+	/* A NAND flash of 128 MiB */
+	fsmc: flash@40000000 {
+		compatible = "stericsson,fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x9f800000 0x1000>,	/* FSMC Register*/
+			<0x80000000 0x4000>,	/* NAND Base DATA */
+			<0x80020000 0x4000>,	/* NAND Base ADDR */
+			<0x80010000 0x4000>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		nand-skip-bbtscan;
+		clocks = <&fsmc_clk>;
+
+		partition@0 {
+		label = "boot records";
+			reg = <0x0 0x20000>;
+		};
+		partition@20000 {
+			label = "free";
+			reg = <0x20000 0x7e0000>;
+		};
+		partition@800000 {
+			label = "platform";
+			reg = <0x800000 0xf800000>;
+		};
+	};
+
+	i2c0: i2c@c0004000 {
+		compatible = "st,ddci2c";
+		reg = <0xc0004000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <8>;
+		clocks = <&i2c0_clk>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ab3100: ab3100@48 {
+			compatible = "stericsson,ab3100";
+			reg = <0x48>;
+			interrupt-parent = <&vica>;
+			interrupts = <0>; /* EXT0 IRQ */
+			ab3100-regulators {
+				compatible = "stericsson,ab3100-regulators";
+				ab3100_ldo_a_reg: ab3100_ldo_a {
+					startup-delay-us = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_c_reg: ab3100_ldo_c {
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_d_reg: ab3100_ldo_d {
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_e_reg: ab3100_ldo_e {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					startup-delay-us = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_f_reg: ab3100_ldo_f {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					startup-delay-us = <600>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_g_reg: ab3100_ldo_g {
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2850000>;
+					startup-delay-us = <400>;
+				};
+				ab3100_ldo_h_reg: ab3100_ldo_h {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <2750000>;
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_k_reg: ab3100_ldo_k {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2750000>;
+					startup-delay-us = <200>;
+				};
+				ab3100_ext_reg: ab3100_ext {
+				};
+				ab3100_buck_reg: ab3100_buck {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1800000>;
+					startup-delay-us = <1000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	i2c1: i2c@c0005000 {
+		compatible = "st,ddci2c";
+		reg = <0xc0005000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <9>;
+		clocks = <&i2c1_clk>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fwcam0: fwcam@10 {
+			reg = <0x10>;
+		};
+		fwcam1: fwcam@5d {
+			reg = <0x5d>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vica: interrupt-controller@a0001000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xa0001000 0x20>;
+		};
+
+		vicb: interrupt-controller@a0002000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xa0002000 0x20>;
+		};
+
+		uart0: serial@c0013000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xc0013000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <22>;
+			clocks = <&uart0_clk>, <&uart0_clk>;
+			clock-names = "apb_pclk", "uart0_clk";
+			dmas = <&dmac 17 &dmac 18>;
+			dma-names = "tx", "rx";
+		};
+
+		uart1: serial@c0007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xc0007000 0x1000>;
+			interrupt-parent = <&vicb>;
+			interrupts = <20>;
+			dmas = <&dmac 38 &dmac 39>;
+			dma-names = "tx", "rx";
+		};
+
+		mmcsd: mmcsd@c0001000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0xc0001000 0x1000>;
+			interrupt-parent = <&vicb>;
+			interrupts = <6 7>;
+			clocks = <&mmc_pclk>, <&mmc_mclk>;
+			clock-names = "apb_pclk", "mclk";
+			max-frequency = <24000000>;
+			bus-width = <4>; // SD-card slot
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cd-gpios = <&gpio 12 0x4>;
+			cd-inverted;
+			vmmc-supply = <&ab3100_ldo_g_reg>;
+			dmas = <&dmac 14>;
+			dma-names = "rx";
+		};
+
+		spi: spi@c0006000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xc0006000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <23>;
+			clocks = <&spi_clk>, <&spi_clk>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dmac 27 &dmac 28>;
+			dma-names = "tx", "rx";
+			num-cs = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi-dummy@1 {
+				compatible = "arm,pl022-dummy";
+				reg = <1>;
+				spi-max-frequency = <20000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
new file mode 100644
index 000000000..aed1f2d5f
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+	model = "Samsung Galaxy S III mini (GT-I8190)";
+	compatible = "samsung,golden", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&ab8500_ldo_aux4_reg>;
+			vcc-supply = <&ab8500_ldo_aux6_reg>;
+
+			interrupt-parent = <&gpio2>;
+			interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_default>;
+			linux,keycodes = <KEY_MENU KEY_BACK>;
+		};
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux8_reg>;
+		};
+	};
+
+	soc {
+		/* External Micro SD card slot */
+		sdi0_per1@80126000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			non-removable;
+			/*
+			 * Unfortunately, there is no way to enable the UHS
+			 * modes due to a limitation of the SD level translator:
+			 * It will either translate to 2.9V or disconnect the
+			 * DATA lines, so switching to 1.8V signal voltage fails.
+			 */
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+		};
+
+		/* WLAN SDIO */
+		sdi1_per2@80118000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			non-removable;
+			cap-sd-highspeed;
+
+			vmmc-supply = <&wl_reg_on>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+
+				/* GPIO216 (WLAN_HOST_WAKE) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default>;
+			};
+		};
+
+		/* eMMC */
+		sdi2_per3@80005000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+
+			vmmc-supply = <&vmem_3v3>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+		};
+
+		/* BT UART */
+		uart@80120000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 (BT_VREG_ON) */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* GPIO199 (BT_WAKE) */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* GPIO97 (BT_HOST_WAKE) */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART */
+		uart@80007000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				reg = <0x44>;
+
+				/* GPIO146 (PS_INT) */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&proximity_default>;
+
+				sharp,proximity-far-hysteresis = <0x40>;
+				sharp,proximity-close-hysteresis = <0x0f>;
+			};
+		};
+
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			imu@68 {
+				compatible = "invensense,mpu6050";
+				reg = <0x68>;
+
+				/* GPIO206 (ACC_INT) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					      "-1", "0", "0",
+					       "0", "0", "1";
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&imu_default>;
+			};
+		};
+
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			touchscreen@4a {
+				compatible = "atmel,maxtouch";
+				reg = <0x4a>;
+
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						regulator-name = "sensor_3v";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "vreg_tsp_a3v3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "vdd_tf_2v91";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "key_led_3.3v";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "vreg_tsp_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "touch_key_2.2v";
+						regulator-min-microvolt = <2200000>;
+						regulator-max-microvolt = <2200000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "sensor_1v8";
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi-controller@a0351000 {
+				panel@0 {
+					compatible = "samsung,s6e63m0";
+					reg = <0>;
+					max-brightness = <15>;
+					vdd3-supply = <&panel_reg_3v0>;
+					vci-supply = <&panel_reg_1v8>;
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					/* ESD (electrostatic discharge) detection interrupt */
+					interrupt-parent = <&gpio2>;
+					interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+					interrupt-names = "esd";
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			/* GPIO67 (VOL_UP) */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			/* GPIO92 (VOL_DOWN) */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		home {
+			label = "Home";
+			/* GPIO91 (HOME_KEY) */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 (MOT_EN) */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	/* External LDO for eMMC */
+	vmem_3v3: regulator-vmem {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		startup-delay-us = <200>;
+
+		/* GPIO223 (MEM_LDO_EN) */
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mem_ldo_default>;
+	};
+
+	/* TI TXS0206-29 level translator for 2.9 V */
+	sd_level_translator: regulator-sd-level-translator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+
+		startup-delay-us = <200>;
+
+		/* GPIO87 (TXS0206-29_EN) */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/*
+	 * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the BCM chip is actually connected directly to VBAT.
+	 */
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		startup-delay-us = <100000>;
+
+		/* GPIO215 (WLAN_EN) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+
+	/* MIC5366 GPIO-controlled regulator */
+	panel_reg_1v8: regulator-panel-1v8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "panel-fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <200>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reg_default_mode>;
+	};
+
+	/* MIC5366 GPIO-controlled regulator */
+	panel_reg_3v0: regulator-panel-3v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "panel-fixed-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <200>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reg_default_mode>;
+	};
+};
+
+&pinctrl {
+	gpio-keys {
+		gpio_keys_default: gpio_keys_default {
+			golden_cfg1 {
+				pins = "GPIO67",	/* VOL_UP */
+				       "GPIO91",	/* HOME_KEY */
+				       "GPIO92";	/* VOL_DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			golden_cfg1 {
+				pins = "GPIO77",	/* TOUCHKEY_SCL */
+				       "GPIO78";	/* TOUCHKEY_SDA */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			golden_cfg1 {
+				pins = "GPIO151",	/* COMP_SCL */
+				       "GPIO152";	/* COMP_SDA */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	touchkey {
+		touchkey_default: touchkey_default {
+			golden_cfg1 {
+				pins = "GPIO79";	/* TOUCHKEY_INT */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	sdi0 {
+		sd_level_translator_default: sd_level_translator_default {
+			golden_cfg1 {
+				pins = "GPIO87_B3";	/* TXS0206-29_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	sdi2 {
+		mem_ldo_default: mem_ldo_default {
+			golden_cfg1 {
+				pins = "GPIO223_AH9";	/* MEM_LDO_EN */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups =
+				"lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins =
+				"GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	display {
+		display_default_mode: display_default {
+			golden_cfg1 {
+				pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */
+				ste,config = <&gpio_out_lo>;
+			};
+			golden_cfg2 {
+				pins = "GPIO82_C1"; /* LDI_ESD_DET */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+		panel_reg_default_mode: panel_reg_default {
+			golden_cfg1 {
+				pins = "GPIO219_AG10"; /* LCD_PWR_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	proximity {
+		proximity_default: proximity_default {
+			golden_cfg1 {
+				pins = "GPIO146_D13";	/* PS_INT */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	imu {
+		imu_default: imu_default {
+			golden_cfg1 {
+				pins = "GPIO206_AG24";	/* ACC_INT */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	tsp {
+		tsp_default: tsp_default {
+			golden_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	wlan {
+		wlan_default: wlan_default {
+			golden_cfg1 {
+				pins = "GPIO216_AG12";	/* WLAN_HOST_WAKE */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+
+		wlan_en_default: wlan_en_default {
+			golden_cfg1 {
+				pins = "GPIO215_AH13";	/* WLAN_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	bluetooth {
+		bluetooth_default: bluetooth_default {
+			golden_cfg1 {
+				pins = "GPIO199_AH23",	/* BT_WAKE */
+				       "GPIO222_AJ9";	/* BT_VREG_ON */
+				ste,config = <&gpio_out_lo>;
+			};
+			golden_cfg2 {
+				pins = "GPIO97_D9";	/* BT_HOST_WAKE */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	vibrator {
+		vibrator_default: vibrator_default {
+			golden_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			golden_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			golden_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
new file mode 100644
index 000000000..446d93c1c
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung XCover 2 (GT-S7710)";
+	compatible = "samsung,skomer", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "MENU";
+			/* GPIO204 */
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+		};
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "BACK";
+			/* GPIO205 */
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/* GPIO 69 */
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux8_reg>;
+		};
+	};
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			/* All direction control is used */
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		// eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			/* FIXME: not quite working yet, probably needs regulators */
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the Cypress TMA140 touchscreen only with 3.0V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.0V for the display */
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						/* Intended for 1V8 for touchscreen but actually left unused */
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Hammer to 1.8V for the display */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Mostly VIO for sensors */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_skomer_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				/* GPIO224 used as "smart alert" interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "-1", "0",
+					      "1", "0", "0",
+					       "0", "0", "1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bma254_skomer_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* Cypress CY8CTMA140 touchscreen */
+			touchscreen@20 {
+				compatible = "cypress,cy8ctma140";
+				clock-frequency = <400000>;
+				reg = <0x20>;
+
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				touchscreen-max-pressure = <255>;
+
+				/* GPIO218 for IRQ */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				/* VDD is "digital supply" nominally 1.71-3.6V */
+				vdd-supply = <&ab8500_ldo_aux2_reg>;
+				/* VCPIN is "analog supply", 2.7-3.6 V */
+				vcpin-supply = <&ab8500_ldo_aux2_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tma140_skomer_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi-controller@a0351000 {
+				panel {
+					/* NT35510-based Hydis HVA40WV1 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&ab8500_ldo_aux4_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&ab8500_ldo_aux6_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&ktd253>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0 default config to include DAT32DIR
+	 * which is used by this machine. If we don't do this the
+	 * SD card does not work.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				/* This machine uses the DAT31 pin */
+				groups = "mc0_a_1", "mc0dat31dir_a_1";
+			};
+			default_cfg5 {
+				pins = "GPIO21_AB3"; /* DAT31DIR */
+				ste,config = <&out_hi>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			skomer_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			skomer_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			skomer_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6", /* VOL DOWN */
+				       "GPIO204_AF23", /* MENU */
+				       "GPIO205_AG23"; /* BACK */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for BMA254 */
+	bma254 {
+		bma254_skomer_default: bma254_skomer {
+			skomer_cfg1 {
+				pins = "GPIO224_AG9";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_skomer_default: gp2ap002_skomer {
+			skomer_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			skomer_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			skomer_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			skomer_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			skomer_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			skomer_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			skomer_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Interrupt line for the Cypress TMA140 touchscreen */
+	touchscreen {
+		tma140_skomer_default: tma140_skomer {
+			skomer_cfg1 {
+				pins = "GPIO218_AH11";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			skomer_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			skomer_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
new file mode 100644
index 000000000..31c85f945
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+/dts-v1/;
+#include "stih407.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+	model = "STiH407 B2120";
+	compatible = "st,stih407-b2120", "st,stih407";
+
+	chosen {
+		bootargs = "clk_ignore_unused";
+		stdout-path = &sbc_serial0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		serial0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
+	};
+
+};
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
new file mode 100644
index 000000000..1ab40db7c
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+/ {
+	/*
+	 * Fixed 30MHz oscillator inputs to SoC
+	 */
+	clk_sysin: clk-sysin {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <30000000>;
+	};
+
+	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+
+
+			/*
+			 * ARM Peripheral clock for timers
+			 */
+			arm_periph_clk: clk-m-a9-periphs {
+				#clock-cells = <0>;
+				compatible = "fixed-factor-clock";
+
+				clocks = <&clk_m_a9>;
+				clock-div = <2>;
+				clock-mult = <1>;
+			};
+		};
+
+		clockgen-a@90ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0";
+				clock-critical = <CLK_IC_LMI0>;
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+		};
+
+		clk_s_c0: clockgen-c@9103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+
+					clocks = <&clk_s_c0_flexgen 13>;
+
+					clock-output-names = "clk-m-a9-ext2f-div2";
+
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@9104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clockgen-d2@9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
new file mode 100644
index 000000000..23a1746f3
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -0,0 +1,986 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gp0_reserved: rproc@45000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x45000000 0x00400000>;
+			no-map;
+		};
+
+		delta_reserved: rproc@44000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x44000000 0x01000000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+
+			clocks = <&clk_m_a9>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			cpu0-supply = <&pwm_regulator>;
+			st,syscfg = <&syscfg_core 0x8e0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+
+					 /* kHz     uV   */
+			operating-points = <1500000 0
+					    1200000 0
+					    800000  0
+					    500000  0>;
+		};
+	};
+
+	intc: interrupt-controller@8761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@8760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@8760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller@8762000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	arm-pmu {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pwm_regulator: pwm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 3 8448>;
+		regulator-name = "CPU_1V0_AVS";
+		regulator-min-microvolt = <784000>;
+		regulator-max-microvolt = <1299000>;
+		regulator-always-on;
+		max-duty-cycle = <255>;
+		status = "okay";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		restart: restart-controller@0 {
+			compatible = "st,stih407-restart";
+			reg = <0 0>;
+			st,syscfg = <&syscfg_sbc_reg>;
+			status = "okay";
+		};
+
+		powerdown: powerdown-controller@0 {
+			compatible = "st,stih407-powerdown";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		softreset: softreset-controller@0 {
+			compatible = "st,stih407-softreset";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		picophyreset: picophyreset-controller@0 {
+			compatible = "st,stih407-picophyreset";
+			reg = <0 0>;
+			#reset-cells = <1>;
+		};
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+
+			sti_sasg_codec: sti-sasg-codec {
+				compatible = "st,stih407-sas-codec";
+				#sound-dai-cells = <1>;
+				status = "disabled";
+				st,syscfg = <&syscfg_core>;
+			};
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		irq-syscfg@0 {
+			compatible    = "st,stih407-irq-syscfg";
+			reg = <0 0>;
+			st,syscfg     = <&syscfg_core>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			/* Pinctrl moved out to a per-board configuration */
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb2_picophy0: phy1@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0x100 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY2_RESET>;
+			reset-names = "global", "port";
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			reg = <0 0>;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		/* SBC SSC */
+		spi@9540000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9541000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9542000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9542000 0x110>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi12_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mmc0: sdhci@9060000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+			reg-names = "mmc", "top-mmc-delay";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mmc0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			bus-width = <8>;
+		};
+
+		mmc1: sdhci@9080000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09080000 0x7ff>;
+			reg-names = "mmc";
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+			resets = <&softreset STIH407_MMC1_SOFTRESET>;
+			bus-width = <4>;
+		};
+
+		/* Watchdog and Real-Time Clock */
+		lpc@8787000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8787000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+			timeout-sec = <120>;
+			st,syscfg = <&syscfg_core>;
+			st,lpc-mode = <ST_LPC_MODE_WDT>;
+		};
+
+		lpc@8788000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8788000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
+		};
+
+		sata0: sata@9b20000 {
+			compatible = "st,ahci";
+			reg = <0x9b20000 0x1000>;
+
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port0 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+				 <&softreset STIH407_SATA0_SOFTRESET>,
+				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+		sata1: sata@9b28000 {
+			compatible = "st,ahci";
+			reg = <0x9b28000 0x1000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port1 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+				 <&softreset STIH407_SATA1_SOFTRESET>,
+				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn",
+				      "sw-rst",
+				      "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			ports-implemented = <0x1>;
+
+			status = "disabled";
+		};
+
+
+		st_dwc3: dwc3@8f94000 {
+			compatible	= "st,stih407-dwc3";
+			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names	= "reg-glue", "syscfg-reg";
+			st,syscfg	= <&syscfg_core>;
+			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+					  <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names	= "powerdown", "softreset";
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_usb3>;
+			ranges;
+
+			status = "disabled";
+
+			dwc3: dwc3@9900000 {
+				compatible	= "snps,dwc3";
+				reg		= <0x09900000 0x100000>;
+				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode		= "host";
+				phy-names	= "usb2-phy", "usb3-phy";
+				phys		= <&usb2_picophy0>,
+						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
+		};
+
+		rng10: rng@8a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@8a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			device_type = "network";
+			status = "disabled";
+			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			reg = <0x9630000 0x8000>, <0x80 0x4>;
+			reg-names = "stmmaceth", "sti-ethconf";
+
+			st,syscon = <&syscfg_sbc_reg 0x80>;
+			st,gmac_en;
+			resets = <&softreset STIH407_ETH1_SOFTRESET>;
+			reset-names = "stmmaceth";
+
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq";
+
+			/* DMA Bus Mode */
+			snps,pbl = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgmii1>;
+
+			clock-names = "stmmaceth", "sti-ethclk";
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
+		};
+
+		mailbox0: mailbox@8f00000  {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f00000 0x1000>;
+			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells	= <2>;
+			mbox-name	= "a9";
+			status		= "okay";
+		};
+
+		mailbox1: mailbox@8f01000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f01000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_1";
+			status		= "okay";
+		};
+
+		mailbox2: mailbox@8f02000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f02000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_gp_0";
+			status		= "okay";
+		};
+
+		mailbox3: mailbox@8f03000 {
+			compatible	= "st,stih407-mailbox";
+			reg		= <0x8f03000 0x1000>;
+			#mbox-cells	= <2>;
+			mbox-name	= "st231_audio_video";
+			status		= "okay";
+		};
+
+		st231_gp0: st231-gp0@0 {
+			compatible	= "st,st231-rproc";
+			reg		= <0 0>;
+			memory-region	= <&gp0_reserved>;
+			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x22c>;
+			#mbox-cells = <1>;
+			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+			mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+		};
+
+		st231_delta: st231-delta@0 {
+			compatible	= "st,st231-rproc";
+			reg		= <0 0>;
+			memory-region	= <&delta_reserved>;
+			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
+			reset-names	= "sw_reset";
+			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
+			clock-frequency	= <600000000>;
+			st,syscfg	= <&syscfg_core 0x224>;
+			#mbox-cells = <1>;
+			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+
+			status = "disabled";
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,stih407-uni-player-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 2 0 1>;
+			dma-names = "tx";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,stih407-uni-player-pcm-out";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 3 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,stih407-uni-player-dac";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 4 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,stih407-uni-player-spdif";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,stih407-uni-reader-pcm_in";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,stih407-uni-reader-hdmi";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+
+			status = "disabled";
+		};
+
+		delta0@0 {
+			compatible = "st,st-delta";
+			reg = <0 0>;
+			clock-names = "delta",
+				      "delta-st231",
+				      "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
new file mode 100644
index 000000000..2cf335714
--- /dev/null
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -0,0 +1,1262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc@961f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@9610000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@9611000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@9612000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@9613000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@9614000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@9615000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+				st,retime-pin-mask = <0x3f>;
+			};
+
+			cec0 {
+				pinctrl_cec0_default: cec0-default {
+					st,pins {
+						hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+
+				pinctrl_uhf: uhf0 {
+					st,pins {
+						ir = <&pio4 1 ALT2 IN>;
+					};
+				};
+
+				pinctrl_tx: tx0 {
+					st,pins {
+						tx = <&pio4 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_tx_od: tx_od0 {
+					st,pins {
+						tx_od = <&pio4 3 ALT2 OUT>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1: rmii1-0 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk: rmii1_phyclk {
+					st,pins {
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+					st,pins {
+						phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+
+			spi10 {
+				pinctrl_spi10_default: spi10-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 OUT>;
+						mrst = <&pio4 7 ALT1 IN>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi11 {
+				pinctrl_spi11_default: spi11-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 OUT>;
+						mrst = <&pio3 0 ALT2 IN>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi12 {
+				pinctrl_spi12_default: spi12-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 OUT>;
+						mrst = <&pio3 4 ALT2 IN>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0@920f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@9200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@9201000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@9202000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@9203000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@9204000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@9205000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@9206000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@9207000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@9208000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@9209000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+					};
+				};
+				pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
+					st,pins {
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+						cts = <&pio17 2 ALT1 IN>;
+						rts = <&pio17 3 ALT1 OUT>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 OUT>;
+						mrst = <&pio10 7 ALT2 IN>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 OUT>;
+						mrst = <&pio19 5 ALT1 IN>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi1 {
+				pinctrl_spi1_default: spi1-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 OUT>;
+						mrst = <&pio11 2 ALT2 IN>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 OUT>;
+						mrst = <&pio14 4 ALT1 IN>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi2 {
+				pinctrl_spi2_default: spi2-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 OUT>;
+						mrst = <&pio12 7 ALT2 IN>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 OUT>;
+						mrst = <&pio14 7 ALT1 IN>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 OUT>;
+						mrst = <&pio15 7 ALT2 IN>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi3 {
+				pinctrl_spi3_default: spi3-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 OUT>;
+						mrst = <&pio13 7 ALT3 IN>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 OUT>;
+						mrst = <&pio17 5 ALT1 IN>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 OUT>;
+						mrst = <&pio18 7 ALT1 IN>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			tsin0 {
+				pinctrl_tsin0_parallel: tsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin0_serial: tsin0_serial {
+					st,pins {
+						DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin1 {
+				pinctrl_tsin1_parallel: tsin1_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin1_serial: tsin1_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin2 {
+				pinctrl_tsin2_parallel: tsin2_parallel {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
+						DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin2_serial: tsin2_serial {
+					st,pins {
+						DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
+					st,pins {
+						DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
+						PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsin5 {
+				pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
+					st,pins {
+						DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout0 {
+				pinctrl_tsout0_parallel: tsout0_parallel {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+				pinctrl_tsout0_serial: tsout0_serial {
+					st,pins {
+						DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
+						VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			tsout1 {
+				pinctrl_tsout1_serial: tsout1_serial {
+					st,pins {
+						DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
+						VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			mtsin0 {
+				pinctrl_mtsin0_parallel: mtsin0_parallel {
+					st,pins {
+						DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+
+			systrace {
+				pinctrl_systrace_default: systrace-default {
+					st,pins {
+						trc_data0 = <&pio11 3 ALT5 OUT>;
+						trc_data1 = <&pio11 4 ALT5 OUT>;
+						trc_data2 = <&pio11 5 ALT5 OUT>;
+						trc_data3 = <&pio11 6 ALT5 OUT>;
+						trc_clk   = <&pio11 7 ALT5 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1@921f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@9210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
+			tsin4 {
+				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
+					st,pins {
+						DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
+		};
+
+		pin-controller-rear@922f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@9220000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@9221000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@9222000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@9223000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@9224000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@9225000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+				st,retime-pin-mask = <0x7f>;
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi4 {
+				pinctrl_spi4_default: spi4-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 OUT>;
+						mrst = <&pio30 2 ALT1 IN>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 OUT>;
+						mrst = <&pio34 2 ALT3 IN>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+			};
+
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
+			serial3 {
+				pinctrl_serial3: serial3-0 {
+					st,pins {
+						tx = <&pio31 3 ALT1 OUT>;
+						rx = <&pio31 4 ALT1 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash@923f080 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@9230000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@9231000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@9232000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+				pinctrl_sd0: sd0-0 {
+					st,pins {
+						sd_clk = <&pio40 6 ALT1 BIDIR>;
+						sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+						sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+						sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+						sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+						sd_led = <&pio42 0 ALT2 OUT>;
+						sd_pwren = <&pio42 2 ALT2 OUT>;
+						sd_vsel = <&pio42 3 ALT2 OUT>;
+						sd_cd = <&pio42 4 ALT2 IN>;
+						sd_wp = <&pio42 5 ALT2 IN>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+						spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+						spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+						spi-fsm-miso = <&pio40 3 ALT1 IN>;
+						spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+						spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			nand {
+				pinctrl_nand: nand {
+					st,pins {
+						nand_cs1 = <&pio40 6 ALT3 OUT>;
+						nand_cs0 = <&pio40 7 ALT3 OUT>;
+						nand_d0 = <&pio41 0 ALT3 BIDIR>;
+						nand_d1 = <&pio41 1 ALT3 BIDIR>;
+						nand_d2 = <&pio41 2 ALT3 BIDIR>;
+						nand_d3 = <&pio41 3 ALT3 BIDIR>;
+						nand_d4 = <&pio41 4 ALT3 BIDIR>;
+						nand_d5 = <&pio41 5 ALT3 BIDIR>;
+						nand_d6 = <&pio41 6 ALT3 BIDIR>;
+						nand_d7 = <&pio41 7 ALT3 BIDIR>;
+						nand_we = <&pio42 0 ALT3 OUT>;
+						nand_dqs = <&pio42 1 ALT3 OUT>;
+						nand_ale = <&pio42 2 ALT3 OUT>;
+						nand_cle = <&pio42 3 ALT3 OUT>;
+						nand_rnb = <&pio42 4 ALT3 IN>;
+						nand_oe = <&pio42 5 ALT3 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
new file mode 100644
index 000000000..9e212b0af
--- /dev/null
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 STMicroelectronics Limited.
+ * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	soc {
+		sti-display-subsystem@0 {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0>;
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+			};
+
+			sti_hdmi: sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
+			};
+
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
new file mode 100644
index 000000000..158b22687
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+	model = "STiH410 B2120";
+	compatible = "st,stih410-b2120", "st,stih410";
+
+	chosen {
+		bootargs = "clk_ignore_unused";
+		stdout-path = &sbc_serial0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		serial0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+
+		mmc0: sdhci@9060000 {
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+
+		usb2_picophy1: phy2@0 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3@0 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		sti-display-subsystem@0 {
+			sti-hda@8d02000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
new file mode 100644
index 000000000..e2bb59783
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "clk_ignore_unused";
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user_green_1 {
+			label = "User_green_1";
+			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user_green_2 {
+			label = "User_green_2";
+			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user_green_3 {
+			label = "User_green_3";
+			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user_green_4 {
+			label = "User_green_4";
+			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "STI-B2260";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			/* DAC */
+			format = "i2s";
+			mclk-fs = <128>;
+			cpu {
+				sound-dai = <&sti_uni_player0>;
+			};
+
+			codec {
+				sound-dai = <&sti_hdmi>;
+			};
+		};
+	};
+
+	soc {
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			pinctrl-names = "default", "no-hw-flowctrl";
+			pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
+			pinctrl-1 = <&pinctrl_serial0>;
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+			uart-has-rtscts;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpios = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@9060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@9080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2@0 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3@0 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+			status = "okay";
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
new file mode 100644
index 000000000..81a8c25d7
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+	/*
+	 * Fixed 30MHz oscillator inputs to SoC
+	 */
+	clk_sysin: clk-sysin {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <30000000>;
+		clock-output-names = "CLK_SYSIN";
+	};
+
+	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih410-clk", "simple-bus";
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+			/*
+			 * ARM Peripheral clock for timers
+			 */
+			arm_periph_clk: clk-m-a9-periphs {
+				#clock-cells = <0>;
+				compatible = "fixed-factor-clock";
+				clocks = <&clk_m_a9>;
+				clock-div = <2>;
+				clock-mult = <1>;
+			};
+		};
+
+		clockgen-a@90ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+				clock-critical = <CLK_IC_LMI0>;
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
+		};
+
+		clk_s_c0: clockgen-c@9103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hades",
+						     "clk-clust-hades",
+						     "clk-hwpe-hades",
+						     "clk-fc-hades";
+				clock-critical = <CLK_PROC_STFE>,
+						 <CLK_ICN_CPU>,
+						 <CLK_TX_ICN_DMU>,
+						 <CLK_EXT2F_A9>,
+						 <CLK_ICN_LMI>,
+						 <CLK_ICN_SBC>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+
+					clocks = <&clk_s_c0_flexgen 13>;
+
+					clock-output-names = "clk-m-a9-ext2f-div2";
+
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@9104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clockgen-d2@9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi
new file mode 100644
index 000000000..e6eadd124
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+#include "st-pincfg.h"
+/ {
+
+	soc {
+		pin-controller-rear@922f080 {
+
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
new file mode 100644
index 000000000..6d847019c
--- /dev/null
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	aliases {
+		bdisp0 = &bdisp0;
+	};
+
+	soc {
+		usb2_picophy1: phy2@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		usb2_picophy2: phy3@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+
+			status = "disabled";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+
+			status = "disabled";
+		};
+
+		sti-display-subsystem@0 {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			reg = <0 0>;
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>,
+					       <297000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+			};
+
+			sti_hdmi: sti-hdmi@8d04000 {
+				compatible = "st,stih407-hdmi";
+				reg = <0x8d04000 0x1000>;
+				reg-names = "hdmi-reg";
+				#sound-dai-cells = <0>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "irq";
+				clock-names = "pix",
+					      "tmds",
+					      "phy",
+					      "audio",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+					 <&clk_s_d0_flexgen CLK_PCM_0>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
+				reset-names = "hdmi";
+				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+				ddc = <&hdmiddc>;
+			};
+
+			sti-hda@8d02000 {
+				compatible = "st,stih407-hda";
+				status = "disabled";
+				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+				reg-names = "hda-reg", "video-dacs-ctrl";
+				clock-names = "pix",
+					      "hddac",
+					      "main_parent",
+					      "aux_parent";
+				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+					 <&clk_s_d2_flexgen CLK_HDDAC>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+			};
+
+			sti-hqvdp@9c00000 {
+				compatible = "st,stih407-hqvdp";
+				reg = <0x9C00000 0x100000>;
+				clock-names = "hqvdp", "pix_main";
+				clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names = "hqvdp";
+				resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg = <&vtg_main>;
+			};
+		};
+
+		bdisp0:bdisp@9f10000 {
+			compatible = "st,stih407-bdisp";
+			reg = <0x9f10000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "bdisp";
+			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		delta0@0 {
+			compatible = "st,st-delta";
+			clock-names = "delta",
+				      "delta-st231",
+				      "delta-flash-promip";
+			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+		};
+
+		sti-cec@94a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+			hdmi-phandle = <&sti_hdmi>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
new file mode 100644
index 000000000..48c3c64e4
--- /dev/null
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 STMicroelectronics (R&D) Limited.
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "STiH418 B2199";
+	compatible = "st,stih418-b2199", "st,stih418";
+
+	chosen {
+		bootargs = "clk_ignore_unused";
+		stdout-path = &sbc_serial0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0xc0000000>;
+	};
+
+	aliases {
+		serial0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		red {
+			label = "Front Panel LED";
+			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		green {
+			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		mmc1: sdhci@9080000 {
+			status = "okay";
+		};
+
+		mmc0: sdhci@9060000 {
+			status = "okay";
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+			non-removable;
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+
+			phy_port0: port@9b22000 {
+				st,osc-rdy;
+			};
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
new file mode 100644
index 000000000..8fa092462
--- /dev/null
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 STMicroelectronics R&D Limited
+ */
+#include <dt-bindings/clock/stih418-clks.h>
+/ {
+	/*
+	 * Fixed 30MHz oscillator inputs to SoC
+	 */
+	clk_sysin: clk-sysin {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <30000000>;
+		clock-output-names = "CLK_SYSIN";
+	};
+
+	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih418-clk", "simple-bus";
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih418-clkgen-plla9";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+
+			/*
+			 * ARM Peripheral clock for timers
+			 */
+			arm_periph_clk: clk-m-a9-periphs {
+				#clock-cells = <0>;
+				compatible = "fixed-factor-clock";
+				clocks = <&clk_m_a9>;
+				clock-div = <2>;
+				clock-mult = <1>;
+			};
+		};
+
+		clockgen-a@90ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs-pll";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@9103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll0";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgen-pll1";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-icn-reg",
+						     "clk-proc-bdisp-0",
+						     "clk-proc-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phyref",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hevc",
+						     "clk-clust-hevc",
+						     "clk-hwpe-hevc",
+						     "clk-fc-hevc",
+						     "clk-proc-mixer",
+						     "clk-proc-sc",
+						     "clk-avsp-hevc";
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+
+					clocks = <&clk_s_c0_flexgen 13>;
+
+					clock-output-names = "clk-m-a9-ext2f-div2";
+
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@9104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-audio", "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clockgen-d2@9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen-video", "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "",
+						     "",
+						     "",
+						     "",
+						     "clk-tmds-hdmi-div2",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "clk-vp9";
+			};
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
new file mode 100644
index 000000000..a05e2278b
--- /dev/null
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+#include "stih418-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
+			cpu-release-addr = <0x94100A4>;
+		};
+	};
+
+	soc {
+		usb2_picophy1: phy2@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+		};
+
+		usb2_picophy2: phy3@0 {
+			compatible = "st,stih407-usb2-phy";
+			reg = <0 0>;
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+
+		mmc0: sdhci@9060000 {
+			assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			assigned-clock-parents = <&clk_s_c0_pll1 0>;
+			assigned-clock-rates = <200000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
new file mode 100644
index 000000000..d051f080e
--- /dev/null
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/c8sectpfe.h>
+/ {
+	leds {
+		compatible = "gpio-leds";
+		red {
+			label = "Front Panel LED";
+			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		green {
+			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "STI-B2120";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			/* HDMI */
+			format = "i2s";
+			mclk-fs = <128>;
+			cpu {
+				sound-dai = <&sti_uni_player0>;
+			};
+
+			codec {
+				sound-dai = <&sti_hdmi>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			/* DAC */
+			format = "i2s";
+			mclk-fs = <256>;
+			frame-inversion;
+			cpu {
+				sound-dai = <&sti_uni_player2>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 1>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			reg = <2>;
+			/* SPDIF */
+			format = "left_j";
+			mclk-fs = <128>;
+			cpu {
+				sound-dai = <&sti_uni_player3>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 0>;
+			};
+		};
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		ssc2: i2c@9842000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		ssc3: i2c@9843000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		mmc0: sdhci@9060000 {
+			non-removable;
+			status = "okay";
+		};
+
+		mmc1: sdhci@9080000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		miphy28lp_phy: miphy28lp@0 {
+
+			phy_port0: port@9b22000 {
+				st,osc-rdy;
+			};
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
+
+		demux@8a20000 {
+			compatible	= "st,stih407-c8sectpfe";
+			status		= "okay";
+			reg		= <0x08a20000 0x10000>,
+					  <0x08a00000 0x4000>;
+			reg-names	= "c8sectpfe", "c8sectpfe-ram";
+			interrupts	= <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+					  <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "c8sectpfe-error-irq",
+					  "c8sectpfe-idle-irq";
+			pinctrl-0	= <&pinctrl_tsin0_serial>;
+			pinctrl-1	= <&pinctrl_tsin0_parallel>;
+			pinctrl-2	= <&pinctrl_tsin3_serial>;
+			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+			pinctrl-names	= "tsin0-serial",
+					  "tsin0-parallel",
+					  "tsin3-serial",
+					  "tsin4-serial",
+					  "tsin5-serial";
+			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
+			clock-names	= "c8sectpfe";
+
+			/* tsin0 is TSA on NIMA */
+			tsin0: port {
+				tsin-num	= <0>;
+				serial-not-parallel;
+				i2c-bus		= <&ssc2>;
+				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+			};
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			status = "okay";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			status = "okay";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			status = "okay";
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			sti_sasg_codec: sti-sasg-codec {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spdif_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 000000000..8b0ead46e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,323 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_panel: vdd-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpiog 7 1>;
+		};
+		led-red {
+			gpios = <&gpiog 10 1>;
+		};
+		led-blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button-1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		power-supply = <&vdd_panel>;
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
+	stmpe1600: stmpe1600@42 {
+		compatible = "st,stmpe1600";
+		reg = <0x42>;
+		interrupts = <8 3>;
+		interrupt-parent = <&gpioi>;
+		interrupt-controller;
+		wakeup-source;
+
+		stmpegpio: stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&iwdg {
+	status = "okay";
+	timeout-sec = <32>;
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+	max-frequency = <12500000>;
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
new file mode 100644
index 000000000..327613fd9
--- /dev/null
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "STMicroelectronics STM32746g-EVAL board";
+	compatible = "st,stm32746g-eval", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiof 10 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&stmfx_pinctrl 17 1>;
+		};
+		led-red {
+			gpios = <&gpiob 7 1>;
+		};
+		led-blue {
+			gpios = <&stmfx_pinctrl 19 1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	joystick {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&joystick_pins>;
+		pinctrl-names = "default";
+		button-0 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-1 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-2 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-3 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		};
+		button-4 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+
+		stmfx_pinctrl: pinctrl {
+			compatible = "st,stmfx-0300-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+			joystick_pins: joystick {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+				drive-push-pull;
+				bias-pull-up;
+			};
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
new file mode 100644
index 000000000..4774163af
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -0,0 +1,453 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg-fs-1 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
+						 <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
+						 <STM32_PINMUX('B', 15, AF12)>; /* OTG_HS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_MII_TXD2 */
+						 <STM32_PINMUX('B', 8, AF11)>, /* ETH_MII_TXD3 */
+						 <STM32_PINMUX('C', 3, AF11)>, /* ETH_MII_TX_CLK */
+						 <STM32_PINMUX('G', 11,AF11)>, /* ETH_MII_TX_EN_ETH_RMII_TX_EN */
+						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_MII_RX_CLK_ETH_RMII_REF_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>, /* ETH_MII_RX_DV_ETH_RMII_CRS_DV */
+						 <STM32_PINMUX('C', 4, AF11)>, /* ETH_MII_RXD0_ETH_RMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_MII_RXD1_ETH_RMII_RXD1 */
+						 <STM32_PINMUX('H', 6, AF11)>, /* ETH_MII_RXD2 */
+						 <STM32_PINMUX('H', 7, AF11)>; /* ETH_MII_RXD3 */
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc-200 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
+				};
+			};
+
+			pwm1_pins: pwm1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
+						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
+						 <STM32_PINMUX('B', 12, AF1)>; /* TIM1_BKIN */
+				};
+			};
+
+			pwm3_pins: pwm3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
+						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+				};
+			};
+
+			i2c1_pins: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
+						 <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins_a: ltdc-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6*/
+						 <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3*/
+						 <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+						 <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+						 <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			ltdc_pins_b: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
+			i2c3_pins: i2c3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 9, AF4)>,
+						/* I2C3_SDA */
+						 <STM32_PINMUX('A', 8, AF4)>;
+						/* I2C3_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			dcmi_pins: dcmi-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
+						 <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
+						 <STM32_PINMUX('A', 6, AF13)>, /* DCMI_PIXCLK */
+						 <STM32_PINMUX('C', 6, AF13)>, /* DCMI_D0 */
+						 <STM32_PINMUX('C', 7, AF13)>, /* DCMI_D1 */
+						 <STM32_PINMUX('C', 8, AF13)>, /* DCMI_D2 */
+						 <STM32_PINMUX('C', 9, AF13)>, /* DCMI_D3 */
+						 <STM32_PINMUX('C', 11, AF13)>, /*DCMI_D4 */
+						 <STM32_PINMUX('D', 3, AF13)>, /* DCMI_D5 */
+						 <STM32_PINMUX('B', 8, AF13)>, /* DCMI_D6 */
+						 <STM32_PINMUX('E', 6, AF13)>, /* DCMI_D7 */
+						 <STM32_PINMUX('C', 10, AF13)>, /* DCMI_D8 */
+						 <STM32_PINMUX('C', 12, AF13)>, /* DCMI_D9 */
+						 <STM32_PINMUX('D', 6, AF13)>, /* DCMI_D10 */
+						 <STM32_PINMUX('D', 2, AF13)>; /* DCMI_D11 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+
+			sdio_pins: sdio-pins-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od: sdio-pins-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
new file mode 100644
index 000000000..6435e099c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F429i-DISCO board";
+	compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-red {
+			gpios = <&gpiog 14 0>;
+		};
+		led-green {
+			gpios = <&gpiog 13 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 0>;
+		};
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpioc 4 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioa>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&rtc {
+	assigned-clocks = <&rcc 1 CLK_RTC>;
+	assigned-clock-parents = <&rcc 1 CLK_LSI>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+	pinctrl-0 = <&spi5_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
+
+	l3gd20: l3gd20@0 {
+		compatible = "st,l3gd20-gyro";
+		spi-max-frequency = <10000000>;
+		st,drdy-int-pin = <2>;
+		interrupt-parent = <&gpioa>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>,
+				<2 IRQ_TYPE_EDGE_RISING>;
+		reg = <0>;
+		status = "okay";
+	};
+
+	display: display@1{
+		/* Connect panel-ilitek-9341 to ltdc */
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
+		reg = <1>;
+		spi-3wire;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpiod 13 0>;
+		port {
+			panel_in_rgb: endpoint {
+			remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	compatible = "st,stm32f4x9-fsotg";
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
new file mode 100644
index 000000000..3e7a17d91
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
new file mode 100644
index 000000000..0dc5fa94d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -0,0 +1,806 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_i2s_ckin: i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		romem: efuse@1fff7800 {
+			compatible = "st,stm32f4-otp";
+			reg = <0x1fff7800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@22c {
+				reg = <0x22c 0x2>;
+			};
+			ts_cal2: calib@22e {
+				reg = <0x22e 0x2>;
+			};
+		};
+
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+			status = "disabled";
+		};
+
+		timers2: timers@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+			status = "disabled";
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+			status = "disabled";
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
+			status = "disabled";
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+			status = "disabled";
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM12)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		iwdg: watchdog@40003000 {
+			compatible = "st,stm32-iwdg";
+			reg = <0x40003000 0x400>;
+			clocks = <&clk_lsi>;
+			clock-names = "lsi";
+			status = "disabled";
+		};
+
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>;
+			status = "disabled";
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART2)>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART3)>;
+			status = "disabled";
+			dmas = <&dma1 1 4 0x400 0x0>,
+			       <&dma1 3 4 0x400 0x0>;
+			dma-names = "rx", "tx";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART4)>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART5)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C1)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dac: dac@40007400 {
+			compatible = "st,stm32f4-dac-core";
+			reg = <0x40007400 0x400>;
+			resets = <&rcc STM32F4_APB1_RESET(DAC)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(DAC)>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART7)>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(UART8)>;
+			status = "disabled";
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM1)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM8)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART1)>;
+			status = "disabled";
+			dmas = <&dma2 2 4 0x400 0x0>,
+			       <&dma2 7 4 0x400 0x0>;
+			dma-names = "rx", "tx";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(USART6)>;
+			status = "disabled";
+		};
+
+		adc: adc@40012000 {
+			compatible = "st,stm32f4-adc-core";
+			reg = <0x40012000 0x400>;
+			interrupts = <18>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+			clock-names = "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				dmas = <&dma2 0 0 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				dmas = <&dma2 3 1 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc3: adc@200 {
+				compatible = "st,stm32f4-adc";
+				#io-channel-cells = <1>;
+				reg = <0x200>;
+				clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>;
+				interrupt-parent = <&adc>;
+				interrupts = <2>;
+				dmas = <&dma2 1 2 0x400 0x0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		sdio: sdio@40012c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40012c00 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>;
+			clock-names = "apb_pclk";
+			interrupts = <49>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>;
+			status = "disabled";
+		};
+
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM9)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi6: spi@40015400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32f4-spi";
+			reg = <0x40015400 0x400>;
+			interrupts = <86>;
+			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>;
+			status = "disabled";
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+			status = "disabled";
+		};
+
+		crc: crc@40023000 {
+			compatible = "st,stm32f4-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(CRC)>;
+			status = "disabled";
+		};
+
+		rcc: rcc@40023800 {
+			#reset-cells = <1>;
+			#clock-cells = <2>;
+			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
+			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
+		};
+
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA1)>;
+			#dma-cells = <4>;
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2)>;
+			#dma-cells = <4>;
+			st,mem2mem;
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(ETHMAC)>,
+					<&rcc 0 STM32F4_AHB1_CLOCK(ETHMACTX)>,
+					<&rcc 0 STM32F4_AHB1_CLOCK(ETHMACRX)>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			snps,mixed-burst;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "snps,dwc2";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHS)>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 39>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		dcmi: dcmi@50050000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x50050000 0x400>;
+			interrupts = <78>;
+			resets = <&rcc STM32F4_AHB2_RESET(DCMI)>;
+			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(DCMI)>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dcmi_pins>;
+			dmas = <&dma2 1 1 0x414 0x3>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		rng: rng@50060800 {
+			compatible = "st,stm32-rng";
+			reg = <0x50060800 0x400>;
+			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
+
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 SYSTICK>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
new file mode 100644
index 000000000..8c982ae79
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f469.dtsi"
+#include "stm32f469-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32F469i-DISCO board";
+	compatible = "st,stm32f469i-disco", "st,stm32f469";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
+		};
+		led-red {
+			gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
+		};
+		led-blue {
+			gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* This turns on vbus for otg for host mode (dwc2) */
+	vcc5v_otg: vcc5v-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>; /* dsi virtual channel (0..3) */
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+};
+
+&usart3 {
+	pinctrl-0 = <&usart3_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
new file mode 100644
index 000000000..fff542662
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f469-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 6>,
+					      <&pinctrl 12 156 4>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 3 163 5>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f469.dtsi b/arch/arm/boot/dts/stm32f469.dtsi
new file mode 100644
index 000000000..be002e8a7
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469.dtsi
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* Copyright (C) STMicroelectronics 2017 - All Rights Reserved */
+
+#include "stm32f429.dtsi"
+
+/ {
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+			reset-names = "apb";
+			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+			clock-names = "pclk", "ref";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
new file mode 100644
index 000000000..4e1b8b335
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			cec_pins_a: cec-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
+					slew-rate = <0>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			usart1_pins_a: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart1_pins_b: usart1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_b: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_b: usbotg-hs-1 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_a: sdio-pins-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_a: sdio-pins-od-a-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_b: sdio-pins-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_b: sdio-pins-od-b-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_b: can1-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can1_pins_c: can1-2 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can1_pins_d: can1-3 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_a: can3-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+
+			can3_pins_b: can3-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 4, AF11)>;  /* CAN3_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */
+					bias-pull-up;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
new file mode 100644
index 000000000..569d23cc6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F746-DISCO board";
+	compatible = "st,stm32f746-disco", "st,stm32f746";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	/* This turns on vbus for otg fs for host mode (dwc2) */
+	vcc5v_otg_fs: vcc5v-otg-fs-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpiod 5 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746-pinctrl.dtsi b/arch/arm/boot/dts/stm32f746-pinctrl.dtsi
new file mode 100644
index 000000000..fcfd2ac72
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f746-pinctrl";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
new file mode 100644
index 000000000..d49e481b3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -0,0 +1,639 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32fx-clock.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_i2s_ckin: clk-i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+			status = "disabled";
+		};
+
+		timers2: timers@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+			status = "disabled";
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			status = "disabled";
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			status = "disabled";
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			status = "disabled";
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&rcc 1 CLK_USART2>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 1 CLK_USART3>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 1 CLK_UART4>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 1 CLK_UART5>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+			clocks = <&rcc 1 CLK_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40005800 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005800 0x400>;
+			interrupts = <33>,
+				     <34>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
+			clocks = <&rcc 1 CLK_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
+			clocks = <&rcc 1 CLK_I2C3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@40006000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40006000 0x400>;
+			interrupts = <95>,
+				     <96>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
+			clocks = <&rcc 1 CLK_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cec: cec@40006c00 {
+			compatible = "st,stm32-cec";
+			reg = <0x40006C00 0x400>;
+			interrupts = <94>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 1 CLK_UART7>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 1 CLK_UART8>;
+			status = "disabled";
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 1 CLK_USART1>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 1 CLK_USART6>;
+			status = "disabled";
+		};
+
+		sdio2: sdio2@40011c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40011c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>;
+			clock-names = "apb_pclk";
+			interrupts = <103>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		sdio1: sdio1@40012c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40012c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>;
+			clock-names = "apb_pclk";
+			interrupts = <49>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
+		crc: crc@40023000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 12>;
+			status = "disabled";
+		};
+
+		rcc: rcc@40023800 {
+			#reset-cells = <1>;
+			#clock-cells = <2>;
+			compatible = "st,stm32f746-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
+			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
+		};
+
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>;
+			#dma-cells = <4>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+	};
+};
+
+&systick {
+	clocks = <&rcc 1 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
new file mode 100644
index 000000000..be943b701
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include "stm32f769-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32F769-DISCO board";
+	compatible = "st,stm32f769-disco", "st,stm32f769";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x1000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-red {
+			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&rcc {
+	compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc";
+};
+
+&cec {
+	pinctrl-0 = <&cec_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio2 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_b>;
+	pinctrl-1 = <&sdio_pins_od_b>;
+	bus-width = <4>;
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f769-pinctrl.dtsi b/arch/arm/boot/dts/stm32f769-pinctrl.dtsi
new file mode 100644
index 000000000..31005dd99
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f769-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f769-pinctrl";
+};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
new file mode 100644
index 000000000..fa5dcb6a5
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -0,0 +1,306 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+	soc {
+		pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32h743-pinctrl";
+			ranges = <0 0x58020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@58020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA_CK>;
+				st,bank-name = "GPIOA";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiob: gpio@58020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc GPIOB_CK>;
+				st,bank-name = "GPIOB";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioc: gpio@58020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc GPIOC_CK>;
+				st,bank-name = "GPIOC";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiod: gpio@58020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc GPIOD_CK>;
+				st,bank-name = "GPIOD";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioe: gpio@58021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOE_CK>;
+				st,bank-name = "GPIOE";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiof: gpio@58021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc GPIOF_CK>;
+				st,bank-name = "GPIOF";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiog: gpio@58021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc GPIOG_CK>;
+				st,bank-name = "GPIOG";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioh: gpio@58021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc GPIOH_CK>;
+				st,bank-name = "GPIOH";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioi: gpio@58022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOI_CK>;
+				st,bank-name = "GPIOI";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpioj: gpio@58022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc GPIOJ_CK>;
+				st,bank-name = "GPIOJ";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpiok: gpio@58022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc GPIOK_CK>;
+				st,bank-name = "GPIOK";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c1_pins_a: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			ethernet_rmii: rmii-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 11, AF11)>,
+						 <STM32_PINMUX('G', 13, AF11)>,
+						 <STM32_PINMUX('G', 12, AF11)>,
+						 <STM32_PINMUX('C', 4, AF11)>,
+						 <STM32_PINMUX('C', 5, AF11)>,
+						 <STM32_PINMUX('A', 7, AF11)>,
+						 <STM32_PINMUX('C', 1, AF11)>,
+						 <STM32_PINMUX('A', 2, AF11)>,
+						 <STM32_PINMUX('A', 1, AF11)>;
+					slew-rate = <2>;
+				};
+			};
+
+			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+				};
+			};
+
+			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+						 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+				};
+			};
+
+			usart1_pins: usart1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart2_pins: usart2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+					bias-disable;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
+							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+							 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
+							 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
+							 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
+							 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
+							 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
+							 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+							 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+							 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+							 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+							 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
new file mode 100644
index 000000000..1579707ea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -0,0 +1,560 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/clock/stm32h7-clks.h>
+#include <dt-bindings/mfd/stm32h7-rcc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_i2s: i2s_ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+		lptimer1: timer@40002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40002400 0x400>;
+			clocks = <&rcc LPTIM1_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@40003800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40003800 0x400>;
+			interrupts = <36>;
+			resets = <&rcc STM32H7_APB1L_RESET(SPI2)>;
+			clocks = <&rcc SPI2_CK>;
+			status = "disabled";
+
+		};
+
+		spi3: spi@40003c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40003c00 0x400>;
+			interrupts = <51>;
+			resets = <&rcc STM32H7_APB1L_RESET(SPI3)>;
+			clocks = <&rcc SPI3_CK>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			status = "disabled";
+			clocks = <&rcc USART2_CK>;
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C1)>;
+			clocks = <&rcc I2C1_CK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40005800 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005800 0x400>;
+			interrupts = <33>,
+				     <34>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C2)>;
+			clocks = <&rcc I2C2_CK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005C00 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40005C00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32H7_APB1L_RESET(I2C3)>;
+			clocks = <&rcc I2C3_CK>;
+			status = "disabled";
+		};
+
+		dac: dac@40007400 {
+			compatible = "st,stm32h7-dac-core";
+			reg = <0x40007400 0x400>;
+			clocks = <&rcc DAC12_CK>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			status = "disabled";
+			clocks = <&rcc USART1_CK>;
+		};
+
+		spi1: spi@40013000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40013000 0x400>;
+			interrupts = <35>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI1)>;
+			clocks = <&rcc SPI1_CK>;
+			status = "disabled";
+		};
+
+		spi4: spi@40013400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40013400 0x400>;
+			interrupts = <84>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI4)>;
+			clocks = <&rcc SPI4_CK>;
+			status = "disabled";
+		};
+
+		spi5: spi@40015000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x40015000 0x400>;
+			interrupts = <85>;
+			resets = <&rcc STM32H7_APB2_RESET(SPI5)>;
+			clocks = <&rcc SPI5_CK>;
+			status = "disabled";
+		};
+
+		dma1: dma-controller@40020000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40020000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc DMA1_CK>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@40020400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40020400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc DMA2_CK>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+			status = "disabled";
+		};
+
+		dmamux1: dma-router@40020800 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x40020800 0x1c>;
+			#dma-cells = <3>;
+			dma-channels = <16>;
+			dma-requests = <128>;
+			dma-masters = <&dma1 &dma2>;
+			clocks = <&rcc DMA1_CK>;
+		};
+
+		adc_12: adc@40022000 {
+			compatible = "st,stm32h7-adc-core";
+			reg = <0x40022000 0x400>;
+			interrupts = <18>;
+			clocks = <&rcc ADC12_CK>;
+			clock-names = "bus";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_12>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc_12>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc USB1OTG_CK>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@40080000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x40080000 0x40000>;
+			interrupts = <101>;
+			clocks = <&rcc USB2OTG_CK>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		ltdc: display-controller@50001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x50001000 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32H7_APB3_RESET(LTDC)>;
+			clocks = <&rcc LTDC_CK>;
+			clock-names = "lcd";
+			status = "disabled";
+		};
+
+		mdma1: dma-controller@52000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x52000000 0x1000>;
+			interrupts = <122>;
+			clocks = <&rcc MDMA_CK>;
+			#dma-cells = <5>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+		};
+
+		sdmmc1: sdmmc@52007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x52007000 0x1000>;
+			interrupts = <49>;
+			interrupt-names	= "cmd_irq";
+			clocks = <&rcc SDMMC1_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+		};
+
+		exti: interrupt-controller@58000000 {
+			compatible = "st,stm32h7-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x58000000 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
+		};
+
+		syscfg: syscon@58000400 {
+			compatible = "st,stm32-syscfg", "syscon";
+			reg = <0x58000400 0x400>;
+		};
+
+		spi6: spi@58001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x58001400 0x400>;
+			interrupts = <86>;
+			resets = <&rcc STM32H7_APB4_RESET(SPI6)>;
+			clocks = <&rcc SPI6_CK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@58001C00 {
+			compatible = "st,stm32f7-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x58001C00 0x400>;
+			interrupts = <95>,
+				     <96>;
+			resets = <&rcc STM32H7_APB4_RESET(I2C4)>;
+			clocks = <&rcc I2C4_CK>;
+			status = "disabled";
+		};
+
+		lptimer2: timer@58002400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002400 0x400>;
+			clocks = <&rcc LPTIM2_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@58002800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002800 0x400>;
+			clocks = <&rcc LPTIM3_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@58002c00 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x58002c00 0x400>;
+			clocks = <&rcc LPTIM4_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@58003000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x58003000 0x400>;
+			clocks = <&rcc LPTIM5_CK>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		vrefbuf: regulator@58003c00 {
+			compatible = "st,stm32-vrefbuf";
+			reg = <0x58003C00 0x8>;
+			clocks = <&rcc VREF_CK>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <2500000>;
+			status = "disabled";
+		};
+
+		rtc: rtc@58004000 {
+			compatible = "st,stm32h7-rtc";
+			reg = <0x58004000 0x400>;
+			clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+			clock-names = "pclk", "rtc_ck";
+			assigned-clocks = <&rcc RTC_CK>;
+			assigned-clock-parents = <&rcc LSE_CK>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		rcc: reset-clock-controller@58024400 {
+			compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+			reg = <0x58024400 0x400>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+			st,syscfg = <&pwrcfg>;
+		};
+
+		pwrcfg: power-config@58024800 {
+			compatible = "st,stm32-power-config", "syscon";
+			reg = <0x58024800 0x400>;
+		};
+
+		adc_3: adc@58026000 {
+			compatible = "st,stm32h7-adc-core";
+			reg = <0x58026000 0x400>;
+			interrupts = <127>;
+			clocks = <&rcc ADC3_CK>;
+			clock-names = "bus";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc3: adc@0 {
+				compatible = "st,stm32h7-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_3>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+			clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			status = "disabled";
+		};
+	};
+};
+
+&systick {
+	clock-frequency = <250000000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
new file mode 100644
index 000000000..e446d311c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2017 - Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h743-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32H743i-Discovery board";
+	compatible = "st,stm32h743i-disco", "st,stm32h743";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-0 = <&usart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
new file mode 100644
index 000000000..8f398178f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32h743.dtsi"
+#include "stm32h743-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32H743i-EVAL board";
+	compatible = "st,stm32h743i-eval", "st,stm32h743";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@d0000000 {
+		device_type = "memory";
+		reg = <0xd0000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2v9_sd: regulator-v2v9_sd {
+		compatible = "regulator-fixed";
+		regulator-name = "v2v9_sd";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-always-on;
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc USB1ULPI_CK>;
+		clock-names = "main_clk";
+	};
+};
+
+&adc_12 {
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+	adc1: adc@0 {
+		/* potentiometer */
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	broken-cd;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&v2v9_sd>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
new file mode 100644
index 000000000..07c15c1ce
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,1988 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	adc1_in6_pins_a: adc1-in6-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+		};
+	};
+
+	adc12_ain_pins_a: adc12-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+		};
+	};
+
+	adc12_ain_pins_b: adc12-ain-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */
+		};
+	};
+
+	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+		};
+	};
+
+	cec_pins_a: cec-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, AF4)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_sleep_pins_a: cec-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	cec_pins_b: cec-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF5)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_sleep_pins_b: cec-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	dac_ch1_pins_a: dac-ch1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ch2_pins_a: dac-ch2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+		};
+	};
+
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	ethernet0_rgmii_pins_b: rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		 };
+	};
+
+	ethernet0_rgmii_pins_c: rgmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	ethernet0_rmii_pins_a: rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF0)>,   /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	fmc_sleep_pins_a: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c1_pins_b: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_b: i2c1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_a: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_b1: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_b1: i2c2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_c: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_c: i2c2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+		};
+	};
+
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	i2s2_pins_a: i2s2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	i2s2_sleep_pins_a: i2s2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	ltdc_pins_a: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_b: ltdc-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_b: ltdc-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_c: ltdc-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_c: ltdc-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H', 4, ANALOG)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */
+		};
+	};
+
+	ltdc_pins_d: ltdc-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>; /* LCD_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4,  AF9)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11,  AF9)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	ltdc_sleep_pins_d: ltdc-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	m_can1_pins_b: m-can1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_b: m_can1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+		};
+	};
+
+	pwm2_pins_a: pwm2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm2_sleep_pins_a: pwm2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm3_pins_b: pwm3-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_b: pwm3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm4_pins_b: pwm4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_b: pwm4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+		};
+	};
+
+	pwm5_pins_b: pwm5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_b: pwm5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+		};
+	};
+
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+		};
+	};
+
+	sai2a_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_a: sai2a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sai2a_pins_b: sai2a-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, AF10)>;	/* SAI2_SCK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_b: sai2a-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
+				 <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */
+		};
+	};
+
+	sai2a_pins_c: sai2a-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
+		};
+	};
+
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_a: sai2b-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+		};
+	};
+
+	sai2b_pins_b: sai2b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_b: sai2b-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai2b_pins_c: sai2b-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai4a_pins_a: sai4a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai4a_sleep_pins_a: sai4a-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	sdmmc3_b4_pins_b: sdmmc3-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	spdifrx_pins_a: spdifrx-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+			bias-disable;
+		};
+	};
+
+	spdifrx_sleep_pins_a: spdifrx-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+		};
+	};
+
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		   pins1 {
+			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		   };
+		   pins2 {
+			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			 bias-disable;
+		   };
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		   pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		    };
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_c: uart7-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_idle_pins_c: uart7-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_sleep_pins_c: uart7-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	uart8_rtscts_pins_a: uart8rtscts-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
+				 <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
+			bias-disable;
+		};
+	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart2_pins_c: usart2-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_c: usart2-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_c: usart2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart3_pins_a: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_pins_b: usart3-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_b: usart3-idle-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_b: usart3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_c: usart3-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_c: usart3-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_c: usart3-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
+		};
+	};
+
+	usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c2_pins_b2: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_sleep_pins_b2: i2c2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+		};
+	};
+
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_sleep_pins_a: i2c4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
new file mode 100644
index 000000000..9919fc86b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -0,0 +1,1745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		clk_hse: clk-hse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		clk_hsi: clk-hsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <64000000>;
+		};
+
+		clk_lse: clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk_lsi: clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_csi: clk-csi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <4000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&dts>;
+
+			trips {
+				cpu_alert1: cpu-alert1 {
+					temperature = <85000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	booster: regulator-booster {
+		compatible = "st,stm32mp1-booster";
+		st,syscfg = <&syscfg>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timers2: timer@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc TIM2_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 18 0x400 0x1>,
+			       <&dmamux1 19 0x400 0x1>,
+			       <&dmamux1 20 0x400 0x1>,
+			       <&dmamux1 21 0x400 0x1>,
+			       <&dmamux1 22 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers3: timer@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc TIM3_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 23 0x400 0x1>,
+			       <&dmamux1 24 0x400 0x1>,
+			       <&dmamux1 25 0x400 0x1>,
+			       <&dmamux1 26 0x400 0x1>,
+			       <&dmamux1 27 0x400 0x1>,
+			       <&dmamux1 28 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers4: timer@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc TIM4_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 29 0x400 0x1>,
+			       <&dmamux1 30 0x400 0x1>,
+			       <&dmamux1 31 0x400 0x1>,
+			       <&dmamux1 32 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers5: timer@40003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40003000 0x400>;
+			clocks = <&rcc TIM5_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 55 0x400 0x1>,
+			       <&dmamux1 56 0x400 0x1>,
+			       <&dmamux1 57 0x400 0x1>,
+			       <&dmamux1 58 0x400 0x1>,
+			       <&dmamux1 59 0x400 0x1>,
+			       <&dmamux1 60 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers6: timer@40004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40004000 0x400>;
+			clocks = <&rcc TIM6_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 69 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timers7: timer@40005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40005000 0x400>;
+			clocks = <&rcc TIM7_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 70 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timer@40006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40006000 0x400>;
+			clocks = <&rcc TIM12_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timer@40007000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40007000 0x400>;
+			clocks = <&rcc TIM13_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@12 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <12>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timer@40008000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40008000 0x400>;
+			clocks = <&rcc TIM14_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@13 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <13>;
+				status = "disabled";
+			};
+		};
+
+		lptimer1: timer@40009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40009000 0x400>;
+			clocks = <&rcc LPTIM1_K>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@4000b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			dmas = <&dmamux1 39 0x400 0x05>,
+			       <&dmamux1 40 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s2: audio-controller@4000b000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			dmas = <&dmamux1 61 0x400 0x05>,
+			       <&dmamux1 62 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s3: audio-controller@4000c000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdifrx: audio-controller@4000d000 {
+			compatible = "st,stm32h7-spdifrx";
+			#sound-dai-cells = <0>;
+			reg = <0x4000d000 0x400>;
+			clocks = <&rcc SPDIF_K>;
+			clock-names = "kclk";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 93 0x400 0x01>,
+			       <&dmamux1 94 0x400 0x01>;
+			dma-names = "rx", "rx-ctrl";
+			status = "disabled";
+		};
+
+		usart2: serial@4000e000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000e000 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40014000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40014000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C3_K>;
+			resets = <&rcc I2C3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		i2c5: i2c@40015000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x40015000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C5_K>;
+			resets = <&rcc I2C5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		cec: cec@40016000 {
+			compatible = "st,stm32-cec";
+			reg = <0x40016000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
+		dac: dac@40017000 {
+			compatible = "st,stm32h7-dac-core";
+			reg = <0x40017000 0x400>;
+			clocks = <&rcc DAC12>;
+			clock-names = "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dac1: dac@1 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				status = "disabled";
+			};
+
+			dac2: dac@2 {
+				compatible = "st,stm32-dac";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			status = "disabled";
+		};
+
+		timers1: timer@44000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44000000 0x400>;
+			clocks = <&rcc TIM1_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 11 0x400 0x1>,
+			       <&dmamux1 12 0x400 0x1>,
+			       <&dmamux1 13 0x400 0x1>,
+			       <&dmamux1 14 0x400 0x1>,
+			       <&dmamux1 15 0x400 0x1>,
+			       <&dmamux1 16 0x400 0x1>,
+			       <&dmamux1 17 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers8: timer@44001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44001000 0x400>;
+			clocks = <&rcc TIM8_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 47 0x400 0x1>,
+			       <&dmamux1 48 0x400 0x1>,
+			       <&dmamux1 49 0x400 0x1>,
+			       <&dmamux1 50 0x400 0x1>,
+			       <&dmamux1 51 0x400 0x1>,
+			       <&dmamux1 52 0x400 0x1>,
+			       <&dmamux1 53 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			dmas = <&dmamux1 37 0x400 0x05>,
+			       <&dmamux1 38 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: audio-controller@44004000 {
+			compatible = "st,stm32h7-i2s";
+			#sound-dai-cells = <0>;
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi4: spi@44005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44005000 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			dmas = <&dmamux1 83 0x400 0x05>,
+			       <&dmamux1 84 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timers15: timer@44006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44006000 0x400>;
+			clocks = <&rcc TIM15_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 105 0x400 0x1>,
+			       <&dmamux1 106 0x400 0x1>,
+			       <&dmamux1 107 0x400 0x1>,
+			       <&dmamux1 108 0x400 0x1>;
+			dma-names = "ch1", "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@14 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <14>;
+				status = "disabled";
+			};
+		};
+
+		timers16: timer@44007000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44007000 0x400>;
+			clocks = <&rcc TIM16_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 109 0x400 0x1>,
+			       <&dmamux1 110 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+			timer@15 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <15>;
+				status = "disabled";
+			};
+		};
+
+		timers17: timer@44008000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44008000 0x400>;
+			clocks = <&rcc TIM17_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 111 0x400 0x1>,
+			       <&dmamux1 112 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@16 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <16>;
+				status = "disabled";
+			};
+		};
+
+		spi5: spi@44009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44009000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			dmas = <&dmamux1 85 0x400 0x05>,
+			       <&dmamux1 86 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sai1: sai@4400a000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400a000 0x400>;
+			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI1_R>;
+			status = "disabled";
+
+			sai1a: audio-controller@4400a004 {
+				#sound-dai-cells = <0>;
+
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 87 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai1b: audio-controller@4400a024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 88 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai2: sai@4400b000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400b000 0x400>;
+			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI2_R>;
+			status = "disabled";
+
+			sai2a: audio-controller@4400b004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 89 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai2b: audio-controller@4400b024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 90 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai3: sai@4400c000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4400c000 0x400>;
+			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI3_R>;
+			status = "disabled";
+
+			sai3a: audio-controller@4400c004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x04 0x20>;
+				clocks = <&rcc SAI3_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 113 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai3b: audio-controller@4400c024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				clocks = <&rcc SAI3_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 114 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dfsdm: dfsdm@4400d000 {
+			compatible = "st,stm32mp1-dfsdm";
+			reg = <0x4400d000 0x800>;
+			clocks = <&rcc DFSDM_K>;
+			clock-names = "dfsdm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dfsdm0: filter@0 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <0>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 101 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm1: filter@1 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 102 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm2: filter@2 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 103 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm3: filter@3 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <3>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 104 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm4: filter@4 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <4>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 91 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm5: filter@5 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <5>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 92 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x1c>;
+			#dma-cells = <3>;
+			dma-requests = <128>;
+			dma-masters = <&dma1 &dma2>;
+			dma-channels = <16>;
+			clocks = <&rcc DMAMUX>;
+			resets = <&rcc DMAMUX_R>;
+		};
+
+		adc: adc@48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			st,syscfg = <&syscfg>;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				dmas = <&dmamux1 10 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		sdmmc3: sdmmc@48004000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC3_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC3_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb-otg@49000000 {
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x10000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			dr_mode = "otg";
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
+		ipcc: mailbox@4c001000 {
+			compatible = "st,stm32mp1-ipcc";
+			#mbox-cells = <1>;
+			reg = <0x4c001000 0x400>;
+			st,proc-id = <0>;
+			interrupts-extended =
+				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				<&exti 61 1>;
+			interrupt-names = "rx", "tx", "wakeup";
+			clocks = <&rcc IPCC>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		dcmi: dcmi@4c006000 {
+			compatible = "st,stm32-dcmi";
+			reg = <0x4c006000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc CAMITF_R>;
+			clocks = <&rcc DCMI>;
+			clock-names = "mclk";
+			dmas = <&dmamux1 75 0x400 0x0d>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp1-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pwr_regulators: pwr@50001000 {
+			compatible = "st,stm32mp1,pwr-reg";
+			reg = <0x50001000 0x10>;
+
+			reg11: reg11 {
+				regulator-name = "reg11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			reg18: reg18 {
+				regulator-name = "reg18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			usb33: usb33 {
+				regulator-name = "usb33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
+			reg = <0x50001014 0x4>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		lptimer2: timer@50021000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50021000 0x400>;
+			clocks = <&rcc LPTIM2_K>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@50022000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50022000 0x400>;
+			clocks = <&rcc LPTIM3_K>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@50023000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50023000 0x400>;
+			clocks = <&rcc LPTIM4_K>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@50024000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50024000 0x400>;
+			clocks = <&rcc LPTIM5_K>;
+			clock-names = "mux";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		vrefbuf: vrefbuf@50025000 {
+			compatible = "st,stm32-vrefbuf";
+			reg = <0x50025000 0x8>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <2500000>;
+			clocks = <&rcc VREF>;
+			status = "disabled";
+		};
+
+		sai4: sai@50027000 {
+			compatible = "st,stm32h7-sai";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50027000 0x400>;
+			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI4_R>;
+			status = "disabled";
+
+			sai4a: audio-controller@50027004 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x04 0x20>;
+				clocks = <&rcc SAI4_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 99 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai4b: audio-controller@50027024 {
+				#sound-dai-cells = <0>;
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				clocks = <&rcc SAI4_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 100 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dts: thermal@50028000 {
+			compatible = "st,stm32-thermal";
+			reg = <0x50028000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc TMPSENS>;
+			clock-names = "pclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		hash1: hash@54002000 {
+			compatible = "st,stm32f756-hash";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc HASH1>;
+			resets = <&rcc HASH1_R>;
+			dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+			dma-names = "in";
+			dma-maxburst = <2>;
+			status = "disabled";
+		};
+
+		rng1: rng@54003000 {
+			compatible = "st,stm32-rng";
+			reg = <0x54003000 0x400>;
+			clocks = <&rcc RNG1_K>;
+			resets = <&rcc RNG1_R>;
+			status = "disabled";
+		};
+
+		mdma1: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			resets = <&rcc MDMA_R>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		fmc: memory-controller@58002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp1-fmc2-ebi";
+			reg = <0x58002000 0x1000>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+
+			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+				 <4 0 0x80000000 0x10000000>; /* NAND */
+
+			nand-controller@4,0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "st,stm32mp1-fmc2-nfc";
+				reg = <4 0x00000000 0x1000>,
+				      <4 0x08010000 0x1000>,
+				      <4 0x08020000 0x1000>,
+				      <4 0x01000000 0x1000>,
+				      <4 0x09010000 0x1000>,
+				      <4 0x09020000 0x1000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+				       <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+				       <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+				dma-names = "tx", "rx", "ecc";
+				status = "disabled";
+			};
+		};
+
+		qspi: spi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+			       <&mdma1 22 0x10 0x100008 0x0 0x0>;
+			dma-names = "tx", "rx";
+			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdmmc@58005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x58005000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
+		ethernet0: ethernet@5800a000 {
+			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+			reg = <0x5800a000 0x2000>;
+			reg-names = "stmmaceth";
+			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth",
+				      "mac-clk-tx",
+				      "mac-clk-rx",
+				      "eth-ck",
+				      "ethstp";
+			clocks = <&rcc ETHMAC>,
+				 <&rcc ETHTX>,
+				 <&rcc ETHRX>,
+				 <&rcc ETHCK_K>,
+				 <&rcc ETHSTP>;
+			st,syscon = <&syscfg 0x4>;
+			snps,mixed-burst;
+			snps,pbl = <2>;
+			snps,en-tx-lpi-clockgating;
+			snps,axi-config = <&stmmac_axi_config_0>;
+			snps,tso;
+			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+		};
+
+		usbh_ohci: usbh-ohci@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usbh-ehci@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
+		ltdc: display-controller@5a001000 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x5a001000 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LTDC_PX>;
+			clock-names = "lcd";
+			resets = <&rcc LTDC_R>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
+		usart1: serial@5c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x5c000000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			status = "disabled";
+		};
+
+		spi6: spi@5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c4: i2c@5c002000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c002000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		i2c6: i2c@5c009000 {
+			compatible = "st,stm32mp15-i2c";
+			reg = <0x5c009000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C6_K>;
+			resets = <&rcc I2C6_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x20>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
+	};
+
+	mlahb: ahb {
+		compatible = "st,mlahb", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges = <0x00000000 0x38000000 0x10000>,
+			     <0x10000000 0x10000000 0x60000>,
+			     <0x30000000 0x30000000 0x60000>;
+
+		m4_rproc: m4@10000000 {
+			compatible = "st,stm32mp1-m4";
+			reg = <0x10000000 0x40000>,
+			      <0x30000000 0x40000>,
+			      <0x38000000 0x10000>;
+			resets = <&rcc MCU_R>;
+			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+			st,syscfg-tz = <&rcc 0x000 0x1>;
+			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
new file mode 100644
index 000000000..1c1889b19
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			clock-frequency = <650000000>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
new file mode 100644
index 000000000..02a391329
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP153C-C065-R102-F0819-SPI-E2-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 587-200 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-drc02.dtsi"
+
+/ {
+	model = "DH electronics STM32MP153C DHCOM DRC02";
+	compatible = "dh,stm32mp153c-dhcom-drc02", "dh,stm32mp153c-dhcom-som",
+		     "st,stm32mp153";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi
new file mode 100644
index 000000000..54e73ccea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+	soc {
+		gpu: gpu@59000000 {
+			compatible = "vivante,gc";
+			reg = <0x59000000 0x800>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc GPU>, <&rcc GPU_K>;
+			clock-names = "bus" ,"core";
+			resets = <&rcc GPU_R>;
+		};
+
+		dsi: dsi@5a000000 {
+			compatible = "st,stm32-dsi";
+			reg = <0x5a000000 0x800>;
+			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clock-names = "pclk", "ref", "px_clk";
+			resets = <&rcc DSI_R>;
+			reset-names = "apb";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
new file mode 100644
index 000000000..8a6eaca99
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+/* This DT is here only for backward compatibility */
+#include "stm32mp157a-dhcor-avenger96.dts"
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
new file mode 100644
index 000000000..275167f26
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * Avenger96 PCB number: 588-200 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-avenger96.dtsi"
+
+/ {
+	model = "Arrow Electronics STM32MP157A Avenger96 board";
+	compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
+		     "st,stm32mp157";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "disabled";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
new file mode 100644
index 000000000..4c8be9c8e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+	compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
new file mode 100644
index 000000000..70f394b4d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+	model = "Shiratech STM32MP157A IoT Box";
+	compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157";
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&i2c2 {
+	ccs811@5b {
+		compatible = "ams,ccs811";
+		reg = <0x5b>;
+		wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* WiFi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <1>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* Bluetooth */
+&uart4 {
+	/* Note: HW flow control is broken, hence using custom CTS/RTS gpios */
+	/delete-property/st,hw-flow-ctrl;
+	cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <115200>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
new file mode 100644
index 000000000..249a53877
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+	model = "Shiratech STM32MP157A Stinger96 board";
+	compatible = "shiratech,stm32mp157a-stinger96", "st,stm32mp157";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
new file mode 100644
index 000000000..4dd138d69
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		serial2 = &usart2;
+		spi0 = &spi4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+/* Only headless mode is supported */
+&gpu {
+	status = "disabled";
+};
+
+/* LS-I2C0 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <1000>;
+	i2c-scl-falling-time-ns = <300>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v9: ldo2 {
+				regulator-name = "v2v9";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	broken-cd;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+/* LS-SPI0 */
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins_a>;
+	cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* BG96 */
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_b>;
+	pinctrl-1 = <&usart2_sleep_pins_b>;
+	st,hw-flow-ctrl;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_c>;
+	st,hw-flow-ctrl;
+	status = "okay";
+};
+
+/* Debug console */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_b>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
new file mode 100644
index 000000000..d3b81382f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2
+ * DHCOM PCB number: 587-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-pdk2.dtsi"
+
+/ {
+	model = "DH electronics STM32MP157C DHCOM Premium Developer Kit (2)";
+	compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som",
+		     "st,stm32mp157";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
new file mode 100644
index 000000000..045636555
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 2>;
+		interrupt-parent = <&gpiof>;
+		interrupt-controller;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		status = "okay";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
new file mode 100644
index 000000000..2e77ccec3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter";
+	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@e8000000 {
+			reg = <0xe8000000 0x8000000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+	pinctrl-0 = <&adc1_in6_pins_a>;
+	pinctrl-names = "default";
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-nsecs = <400>;
+		status = "okay";
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&timers6 {
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
new file mode 100644
index 000000000..a55e80ce2
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		ethernet0 = &ethernet0;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	joystick {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&joystick_pins>;
+		pinctrl-names = "default";
+		button-0 {
+			label = "JoySel";
+			linux,code = <KEY_ENTER>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-1 {
+			label = "JoyDown";
+			linux,code = <KEY_DOWN>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-2 {
+			label = "JoyLeft";
+			linux,code = <KEY_LEFT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-3 {
+			label = "JoyRight";
+			linux,code = <KEY_RIGHT>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		};
+		button-4 {
+			label = "JoyUp";
+			linux,code = <KEY_UP>;
+			interrupt-parent = <&stmfx_pinctrl>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_a>;
+	pinctrl-1 = <&dcmi_sleep_pins_a>;
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov5640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&dsi {
+	phy-dsi-supply = <&reg18>;
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		power-supply = <&v3v3>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+
+	nand-controller@4,0 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xclk";
+		DOVDD-supply = <&v2v8>;
+		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
+		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+		rotation = <180>;
+		status = "okay";
+
+		port {
+			ov5640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+
+	stmfx: stmfx@42 {
+		compatible = "st,stmfx-0300";
+		reg = <0x42>;
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gpioi>;
+		vdd-supply = <&v3v3>;
+
+		stmfx_pinctrl: pinctrl {
+			compatible = "st,stmfx-0300-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+			joystick_pins: joystick-pins {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+				bias-pull-down;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_a>;
+	pinctrl-1 = <&m_can1_sleep_pins_a>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: mx66l51235l@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	flash1: mx66l51235l@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-1 = <&pwm2_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_b>;
+	pinctrl-1 = <&usart3_sleep_pins_b>;
+	pinctrl-2 = <&usart3_idle_pins_b>;
+	/*
+	 * HW flow control USART3_RTS is optional, and isn't default wired to
+	 * the connector. SB23 needs to be soldered in order to use it, and R77
+	 * (ETH_CLK) should be removed.
+	 */
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
new file mode 100644
index 000000000..1e5333fd4
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -0,0 +1,251 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Linux Automation MC-1 board";
+	compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	led-act {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "mc1:green:act";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-rgb {
+		compatible = "pwm-leds";
+
+		led-red {
+			label = "mc1:red:rgb";
+			pwms = <&leds_pwm 1 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+
+		led-green {
+			label = "mc1:green:rgb";
+			pwms = <&leds_pwm 2 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+
+		led-blue {
+			label = "mc1:blue:rgb";
+			pwms = <&leds_pwm 3 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,etm0700g0edh6", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+
+	/* supplied by either debug board or PoE */
+	reg_5v2: regulator_5v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V2";
+		regulator-min-microvolt = <5200000>;
+		regulator-max-microvolt = <5200000>;
+		regulator-always-on;
+	};
+};
+
+&ethernet0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_b>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 { /* KSZ9031RN */
+			reg = <3>;
+			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+			interrupt-parent = <&gpioa>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			micrel,force-master;
+		};
+	};
+};
+
+&gpioz {
+	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
+			  "HWID4", "HWID5";
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_b>;
+	pinctrl-1 = <&i2c5_sleep_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		interrupt-parent = <&gpiod>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
+		vcc-supply = <&reg_3v3>;
+		reg = <0x38>;
+		reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
+		touchscreen-size-x = <1792>;
+		touchscreen-size-y = <1024>;
+		wakeup-source;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_c>;
+	pinctrl-1 = <&ltdc_sleep_pins_c>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&pmic {
+	regulators {
+		buck4-supply = <&reg_5v2>;	/* VIN */
+		ldo2-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
+		ldo5-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
+		boost-supply = <&reg_5v2>;	/* PMIC_BSTIN */
+		pwr_sw2-supply = <&bst_out>;    /* PMIC_SWIN */
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	bus-width = <4>;
+	cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+	/*
+	 * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
+	 * work, thus enable internal pull-ups.
+	 */
+	pins1 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+	pins2 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	bus-width = <8>;
+	mmc-ddr-3_3v;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&timers3 {
+	status = "okay";
+
+	backlight_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm3_pins_b>;
+		pinctrl-1 = <&pwm3_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&timers5 {
+	status = "okay";
+
+	leds_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm5_pins_b>;
+		pinctrl-1 = <&pwm5_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
new file mode 100644
index 000000000..2d9461006
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	model = "Seeed Studio Odyssey-STM32MP157C SOM";
+	compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_d>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
new file mode 100644
index 000000000..be1dd5e9e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-odyssey-som.dtsi"
+
+/ {
+	model = "Seeed Studio Odyssey-STM32MP157C Board";
+	compatible = "seeed,stm32mp157c-odyssey",
+		     "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
+	st,eth-clk-sel;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@7 { /* KSZ9031RN */
+			reg = <7>;
+			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi
new file mode 100644
index 000000000..b06a55a2f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp1: cryp@54001000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54001000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
new file mode 100644
index 000000000..e4d287d99
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&adc {
+	status = "disabled";
+};
+
+&dac {
+	status = "disabled";
+};
+
+&gpiob {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the STM32 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en {
+		gpio-hog;
+		gpios = <8 0>;
+		output-low;
+		line-name = "rs485-rx-en";
+	};
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "Out1",
+			  "Out2", "", "", "";
+};
+
+&gpioi {
+	gpio-line-names = "In1", "", "", "",
+			  "", "", "", "",
+			  "In2", "", "", "",
+			  "", "", "", "";
+
+	/*
+	 * NOTE: The USB Hub on the DRC02 needs a reset signal to be
+	 * pulled high in order to be detected by the USB Controller.
+	 * This signal should be handled by USB power sequencing in
+	 * order to reset the Hub when USB bus is powered down, but
+	 * so far there is no such functionality.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <2 0>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
+&i2c5 {	/* TP7/TP8 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&sdmmc3 {
+	/*
+	 * On DRC02, the SoM does not have SDIO WiFi. The pins
+	 * are used for on-board microSD slot instead.
+	 */
+	/delete-property/broken-cd;
+	cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+	disable-wp;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	/* Use PIO for the display */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";	/* Enable once there is display driver */
+	/*
+	 * Note: PF3/GPIO_A , PD6/GPIO_B , PG0/GPIO_C , PC6/GPIO_E are
+	 * also connected to the display board connector.
+	 */
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+/*
+ * Note: PI3 is UART1_RTS and PI5 is UART1_CTS on DRC02 (uart4 of STM32MP1),
+ *       however the STM32MP1 pinmux cannot map them to UART4 .
+ */
+
+&uart8 {	/* RS485 */
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
new file mode 100644
index 000000000..2c3910651
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		/*
+		 * The EXTi IRQ line 3 is shared with ethernet,
+		 * so mark this as polled GPIO key.
+		 */
+		button-0 {
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
+		};
+
+		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
+		/*
+		 * The EXTi IRQ line 0 is shared with PMIC,
+		 * so mark this as polled GPIO key.
+		 */
+		button-2 {
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "green:led5";
+			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "disabled";
+		};
+
+		led-1 {
+			label = "green:led6";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "green:led7";
+			gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "green:led8";
+			gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		widgets = "Headphone", "Headphone Jack",
+			  "Line", "Line In Jack",
+			  "Microphone", "Microphone Jack";
+		routing = "Headphone Jack", "HP_OUT",
+			  "LINE_IN", "Line In Jack",
+			  "MIC_IN", "Microphone Jack",
+			  "Microphone Jack", "Mic Bias";
+		dais = <&sai2a_port &sai2b_port>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {	/* Header X22 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&i2c5 {	/* Header X21 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&v3v3>;
+		VDDIO-supply = <&vdd>;
+
+		sgtl5000_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sgtl5000_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master = <&sgtl5000_tx_endpoint>;
+			};
+
+			sgtl5000_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master = <&sgtl5000_rx_endpoint>;
+			};
+		};
+
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpioc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-1 = <&ltdc_sleep_pins_b>;
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+	pwm2: pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
new file mode 100644
index 000000000..000af7177
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xC0000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <0>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <1>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			/* LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&rcc ETHCK_K>;
+			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
+			interrupt-parent = <&gpioi>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-always-on;
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	touchscreen@49 {
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		vio-supply = <&v3v3>;
+		interrupts-extended = <&gpioh 15 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
new file mode 100644
index 000000000..d8547307a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */
+#include "stm32mp15xx-dhcor-io1v8.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		serial2 = &usart2;
+		spi0 = &qspi;
+	};
+
+	/* XTal Q1 */
+	cec_clock: clk-cec-fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7513_out>;
+			};
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led1 {
+			label = "green:user0";
+			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user1";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user2";
+			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user3";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32-AV96-HDMI";
+		dais = <&sai2a_port>;
+		status = "okay";
+	};
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&i2c1 {	/* X6 I2C1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c2 {	/* X6 I2C2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_c>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	hdmi-transmitter@3d {
+		compatible = "adi,adv7513";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
+		clocks = <&cec_clock>;
+		clock-names = "cec";
+
+		avdd-supply = <&v3v3>;
+		dvdd-supply = <&v3v3>;
+		pvdd-supply = <&v3v3>;
+		dvdd-3v-supply = <&v3v3>;
+		bgvdd-supply = <&v3v3>;
+
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+
+		status = "okay";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7513_i2s0: endpoint {
+					remote-endpoint = <&sai2a_endpoint>;
+				};
+			};
+		};
+	};
+
+	dh_mac_eeprom: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_d>;
+	pinctrl-1 = <&ltdc_sleep_pins_d>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&adv7513_in>;
+		};
+	};
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_c>;
+	pinctrl-1 = <&sai2a_sleep_pins_c>;
+	clock-names = "pclk", "x8k", "x11k";
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&adv7513_i2s0>;
+				format = "i2s";
+				mclk-fs = <256>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd_io>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_b>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	cs-gpios = <&gpioi 0 0>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&uart4 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	st,hw-flow-ctrl;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
new file mode 100644
index 000000000..75172314d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	/* Enpirion EP3A8LQI U2 on the DHCOR */
+	vdd_io: regulator-buck-io {
+		compatible = "regulator-fixed";
+		regulator-name = "buck-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd_io>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
new file mode 100644
index 000000000..7dba02e9b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		spi0 = &qspi;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x40000000>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				regulator-enable-ramp-delay = <300000>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
new file mode 100644
index 000000000..75869d6a1
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port &i2s2_port>;
+		status = "okay";
+	};
+
+	vin: vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_sleep_pins_b>;
+	status = "okay";
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master = <&cs42l51_tx_endpoint>;
+				bitclock-master = <&cs42l51_tx_endpoint>;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master = <&cs42l51_rx_endpoint>;
+				bitclock-master = <&cs42l51_rx_endpoint>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			buck1-supply = <&vin>;
+			buck2-supply = <&vin>;
+			buck3-supply = <&vin>;
+			buck4-supply = <&vin>;
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&vin>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo4-supply = <&vin>;
+			ldo5-supply = <&vin>;
+			ldo6-supply = <&v3v3>;
+			vref_ddr-supply = <&vin>;
+			boost-supply = <&vin>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_sleep_pins_a>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_c>;
+	pinctrl-1 = <&uart7_sleep_pins_c>;
+	pinctrl-2 = <&uart7_idle_pins_c>;
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_c>;
+	pinctrl-1 = <&usart3_sleep_pins_c>;
+	pinctrl-2 = <&usart3_idle_pins_c>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
new file mode 100644
index 000000000..6706d8311
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	reg_sip_eeprom: regulator_eeprom {
+		compatible = "regulator-fixed";
+		regulator-name = "sip_eeprom";
+		regulator-always-on;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+		};
+
+		pmic_watchdog: watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	sip_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		vcc-supply = <&reg_sip_eeprom>;
+		reg = <0x50>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 000000000..04f7a43ad
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@5000b000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@5000c000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 000000000..328dad140
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AB>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 000000000..7eaa245f4
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 000000000..b63e207de
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AD>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
new file mode 100644
index 000000000..af8ab736f
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "a1000:blue:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 000000000..816d534ac
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 000000000..742629888
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
new file mode 100644
index 000000000..6ca02e824
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		blue {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		green {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led-pins {
+		pins = "PH20", "PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
new file mode 100644
index 000000000..8ee3ff42b
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Dserve DSRV9703C";
+	compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor>;
+		min-microvolt = <3000000>;
+		max-microvolt = <3000000>;
+	};
+
+	reg_motor: reg-motor {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-motor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
new file mode 100644
index 000000000..ea7a59dcf
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+
+	status = "okay";
+
+	button-158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button-1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
new file mode 100644
index 000000000..47dea0922
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 000000000..bf2044bac
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
new file mode 100644
index 000000000..ca878384e
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000..76016f2ca
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000..0a562b2cc
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		left-joystick-left {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
+		};
+
+		left-joystick-right {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
+		};
+
+		left-joystick-up {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
+		};
+
+		left-joystick-down {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
+		};
+
+		right-joystick-left {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
+		};
+
+		right-joystick-right {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
+		};
+
+		right-joystick-up {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
+		};
+
+		right-joystick-down {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
+		};
+
+		dpad-left {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
+		};
+
+		dpad-right {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
+		};
+
+		dpad-up {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
+		};
+
+		dpad-down {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
+		};
+
+		x {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
+		};
+
+		y {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
+		};
+
+		a {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
+		};
+
+		b {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
+		};
+
+		select {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
+		};
+
+		start {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
+		};
+
+		top-left {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
+		};
+
+		top-right {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
new file mode 100644
index 000000000..d4e319d16
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Iteaduino Plus A10";
+	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	axp209: pmic@34 {
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 000000000..8a7b4c53d
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
new file mode 100644
index 000000000..a843e5753
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red1 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		red2 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		red3 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		red4 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
new file mode 100644
index 000000000..f9d74e210
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins>;
+	status = "okay";
+};
+
+&ir0_rx_pins {
+	/* The ir receiver is not always populated */
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
new file mode 100644
index 000000000..059fe9c5d
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
new file mode 100644
index 000000000..17dcdf031
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000..845f76824
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pin {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
+	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000..83287b6c9
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		tx {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
new file mode 100644
index 000000000..bc4f12896
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 000000000..24a3d23e1
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
new file mode 100644
index 000000000..1c5a666c5
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -0,0 +1,1272 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000 1400000
+				912000	1350000
+				864000	1300000
+				624000	1250000
+				>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun4i-a10-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 000000000..64d50fcfc
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		red {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t003: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 000000000..8af0eae2d
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		red {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_t004: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
new file mode 100644
index 000000000..6e90ccb26
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 000000000..d6bb82c29
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pa_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp152: pmic@30 {
+		reg = <0x30>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp152.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PE3";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pc_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000..b2a49a216
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_r7: led-pin {
+		pins = "PB2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 000000000..1f74ba163
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pd_pins>;
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_ldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi2";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
new file mode 100644
index 000000000..09c486b60
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_HDMI>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DRAM_DE_BE>,
+				 <&ccu CLK_DE_BE>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a10s-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a10s-ccu";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB19", "PB20";
+		function = "uart0";
+	};
+
+	uart2_pc_pins: uart2-pc-pins {
+		pins = "PC18", "PC19";
+		function = "uart2";
+	};
+
+	emac_pa_pins: emac-pa-pins {
+		pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		function = "emac";
+	};
+
+	mmc1_pins: mmc1-pins {
+		pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		function = "mmc1";
+		drive-strength = <30>;
+	};
+
+	spi2_pb_pins: spi2-pb-pins {
+		pins = "PB12", "PB13", "PB14";
+		function = "spi2";
+	};
+
+	spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+		pins = "PB11";
+		function = "spi2";
+	};
+};
+
+&tcon0_out {
+	tcon0_out_hdmi: endpoint@2 {
+		reg = <2>;
+		remote-endpoint = <&hdmi_in_tcon0>;
+		allwinner,tcon-channel = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
new file mode 100644
index 000000000..894c4c4f9
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Difrnce DIT4350";
+	compatible = "difrnce,dit4350", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 000000000..a23bf2479
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 000000000..b1e2afd9d
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
new file mode 100644
index 000000000..9b9f2a574
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 000000000..439ae3b53
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
new file mode 100644
index 000000000..ba8d75b3c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun5i-a13-olinuxino.dts, which is
+ *   Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *   Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi One";
+	compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label ="licheepi:red:usr";
+			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label ="licheepi:green:usr";
+			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue {
+			label ="licheepi:blue:usr";
+			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-984 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <984126>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "csi-1.8v";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "csi-2.8v";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 000000000..5df398d77
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinom: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
new file mode 100644
index 000000000..39101228a
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		power {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	bridge {
+		compatible = "dumb-vga-dac";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxino: led-pin {
+		pins = "PG9";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_bridge_in>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 000000000..e9ef97c9c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
new file mode 100644
index 000000000..f9fc1c8b6
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+
+	panel: panel {
+		compatible = "bananapi,s070wv20-ct16";
+		power-supply = <&reg_vcc3v3>;
+		enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 000000000..be486d28d
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+		scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+};
+
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
new file mode 100644
index 000000000..ae04955fd
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun5i-a13-ccu";
+};
+
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points = <
+		/* kHz	  uV */
+		1008000 1400000
+		912000	1350000
+		864000	1300000
+		624000	1200000
+		576000	1200000
+		432000	1200000
+		>;
+	#cooling-cells = <2>;
+};
+
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
+};
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
new file mode 100644
index 000000000..a32cde3e3
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "disabled";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
new file mode 100644
index 000000000..4c20d731a
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -0,0 +1,333 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "gr8-evb-wm8978";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/sun5i-gr8.dtsi
new file mode 100644
index 000000000..98a8fd5e8
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i.dtsi"
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc {
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&ccu CLK_HOSC>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S>, <&ccu CLK_I2S>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "nextthing,gr8-ccu";
+};
+
+&pio {
+	compatible = "nextthing,gr8-pinctrl";
+
+	i2s0_data_pins: i2s0-data-pins {
+		pins = "PB6", "PB7", "PB8", "PB9";
+		function = "i2s0";
+	};
+
+	i2s0_mclk_pin: i2s0-mclk-pin {
+		pins = "PB5";
+		function = "i2s0";
+	};
+
+	pwm1_pins: pwm1-pin {
+		pins = "PG13";
+		function = "pwm1";
+	};
+
+	spdif_tx_pin: spdif-tx-pin {
+		pins = "PB10";
+		function = "spdif";
+		bias-pull-up;
+	};
+
+	uart1_cts_rts_pins: uart1-cts-rts-pins {
+		pins = "PG5", "PG6";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
new file mode 100644
index 000000000..4bf4943d4
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+		spi0 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT
+ * Chip.
+ *
+ * If those are not enabled, the SDIO part will not enumerate, and
+ * since there's no way currently to pass DT infos to an SDIO device,
+ * we cannot really do better than this ugly hack for now.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>;
+	status = "disabled";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>,
+		    <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
new file mode 100644
index 000000000..de35dbcd1
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..1a9926d71
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * All other devices on this bus are also rated for 400KHz.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+	usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
new file mode 100644
index 000000000..c2b4fbf55
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -0,0 +1,798 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun5i-ccu.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/reset/sun5i-ccu.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c01000 {
+			compatible = "allwinner,sun5i-a13-mbus";
+			reg = <0x01c01000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x20000000>;
+			#interconnect-cells = <1>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@1c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ccu CLK_AHB_TVE>;
+			resets = <&ccu RST_TVE>;
+			status = "disabled";
+
+			port {
+
+				tve0_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+			resets = <&ccu RST_LCD>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD>,
+				 <&ccu CLK_TCON_CH0>,
+				 <&ccu CLK_TCON_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun5i-a13-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun5i-a13-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <54>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			emac_pd_pins: emac-pd-pins {
+				pins = "PD6", "PD7", "PD10",
+				       "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD18", "PD19", "PD20",
+				       "PD21", "PD22", "PD23", "PD24",
+				       "PD25", "PD26", "PD27";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB15", "PB16";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB17", "PB18";
+				function = "i2c2";
+			};
+
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			lcd_rgb565_pins: lcd-rgb565-pins {
+				pins = "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2",
+				       "PC5", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14",
+				       "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			spi2_pe_pins: spi2-pe-pins {
+				pins = "PE1", "PE2", "PE3";
+				function = "spi2";
+			};
+
+			spi2_cs0_pe_pin: spi2-cs0-pe-pin {
+				pins = "PE0";
+				function = "spi2";
+			};
+
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE10", "PE11";
+				function = "uart1";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG3", "PG4";
+				function = "uart1";
+			};
+
+			uart2_pd_pins: uart2-pd-pins {
+				pins = "PD2", "PD3";
+				function = "uart2";
+			};
+
+			uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
+				pins = "PD4", "PD5";
+				function = "uart2";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG9", "PG10";
+				function = "uart3";
+			};
+
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG11", "PG12";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&ccu CLK_HOSC>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE>;
+			interconnects = <&mbus 19>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE>;
+			interconnects = <&mbus 18>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000..32d22025a
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
new file mode 100644
index 000000000..93a15eaaa
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c_lcd: i2c {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+		scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "fail";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
new file mode 100644
index 000000000..73de34ae3
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "dumb-vga-dac";
+		vdd-supply = <&reg_vga_3v3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	reg_vga_3v3: vga_3v3_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vga-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",	"MBIAS",
+		"Headset Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
new file mode 100644
index 000000000..6cc8ccf53
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
new file mode 100644
index 000000000..a645c8f42
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele M9 top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "m9:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
new file mode 100644
index 000000000..648f24746
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "a1000g:blue:pwr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ethernet-phy";
+};
+
+/*
+ * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached
+ * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is
+ * marked as regulator-always-on.
+ */
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-hub";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_aldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
new file mode 100644
index 000000000..f3425a66f
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -0,0 +1,1421 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_hdmi: framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun6i-a31-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			clocks = <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_LCD0_CH0>,
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+
+					tcon0_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun6i-a31-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB1_LCD1>,
+				 <&ccu CLK_LCD1_CH0>,
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1",
+				      "lvds-alt";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon1>;
+					};
+
+					tcon1_in_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_AHB1_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun6i-a31-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
+			resets = <&ccu RST_AHB1_HDMI>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun6i-a31-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_gmii_pins: gmac-gmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				drive-strength = <30>;
+			};
+
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				function = "gmac";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH14", "PH15";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH16", "PH17";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PH18", "PH19";
+				function = "i2c2";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+						 "PD4", "PD5", "PD6", "PD7",
+						 "PD8", "PD9", "PD10", "PD11",
+						 "PD12", "PD13", "PD14", "PD15",
+						 "PD16", "PD17", "PD18", "PD19",
+						 "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_4bit_pins: mmc2-4bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				function = "mmc3";
+				drive-strength = <40>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH28";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_APB1_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>;
+			resets = <&ccu RST_APB1_DAUDIO0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>;
+			resets = <&ccu RST_APB1_DAUDIO1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@1c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_AHB1_EMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun6i-a31-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_AHB1_SS>;
+			reset-names = "ahb";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_APB1_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timer@1c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@1c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi3: spi@1c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_AHB1_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+				 <&ccu CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun6i-a31-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>,
+				 <&ccu CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>,
+				 <&ccu CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_drc1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@1e50000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e50000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>,
+				 <&ccu CLK_DRAM_DRC1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc1>;
+					};
+
+					drc1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun6i-a31-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			compatible = "allwinner,sun6i-a31-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_DRAM_DRC0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_AHB1_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+
+					drc0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k";
+		};
+
+		nmi_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&rtc 0>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&rtc 0>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			s_ir_rx_pin: s-ir-rx-pin {
+				pins = "PL4";
+				function = "s_ir";
+			};
+
+			s_p2wi_pins: s-p2wi-pins {
+				pins = "PL0", "PL1";
+				function = "s_p2wi";
+			};
+		};
+
+		p2wi: i2c@1f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&s_p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
new file mode 100644
index 000000000..a2ef7846e
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Colorfly E708 Q1 tablet";
+	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pg";
+};
+
+&simplefb_lcd {
+	vcc-pg-supply = <&reg_dldo2>;
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
new file mode 100644
index 000000000..1d15e1501
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
new file mode 100644
index 000000000..c5e2c55cd
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button-1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
new file mode 100644
index 000000000..bc3170a0b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -0,0 +1,268 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	status = "okay";
+
+	ctp@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+		#io-channel-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&pio {
+	mma8452_int_primo81: mma8452-int-pin {
+		pins = "PA9";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 000000000..3099491de
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
new file mode 100644
index 000000000..0af48e143
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",	"MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button-349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000..708caee52
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,263 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		green {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		red {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 000000000..2504e7189
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi
new file mode 100644
index 000000000..97e2c51d0
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&de {
+	compatible = "allwinner,sun6i-a31s-display-engine";
+};
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
+
+&tcon0 {
+	compatible = "allwinner,sun6i-a31s-tcon";
+};
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..7de2abd54
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
new file mode 100644
index 000000000..8945dbb11
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2016 Luo Yi <luoyi.ly@gmail.com>
+ *
+ * Thanks to the original work by Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Banana Pi BPI-M1-Plus";
+	compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "bananapi-m1-plus:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "bananapi-m1-plus:pwr:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on usb host ports are tied to DC5V and therefore always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
new file mode 100644
index 000000000..0b3d9ae75
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points = <
+		/* kHz	  uV */
+		960000	1400000
+		912000	1400000
+		864000	1350000
+		720000	1250000
+		528000	1150000
+		312000	1100000
+		144000	1050000
+		>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+	gpio-line-names =
+		/* PA */
+		"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
+			"ETXD2", "ETXD1", "ETXD0",
+		"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
+			"ETXEN", "ETXCK", "ECRS",
+		"ECOL", "ETXERR", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PB */
+		"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
+		"", "USB0-DRV", "", "", "", "", "", "",
+		"", "", "", "", "SCL", "SDA", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PC */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PE */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PF */
+		"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
+			"SD0-D2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PG */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* PH */
+		"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
+		"", "", "SD0-DET", "", "", "", "", "",
+		"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
+		"LED1", "", "", "", "", "", "", "",
+		/* PI */
+		"", "", "", "IO-GCLK", "", "", "", "",
+		"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
+			"SPI-MISO", "SPI-CE1", "",
+		"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
new file mode 100644
index 000000000..5740f9442
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
new file mode 100644
index 000000000..b8203e4ef
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
new file mode 100644
index 000000000..9109ca091
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -0,0 +1,345 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	/* Pin outputs low power clock for WiFi and BT */
+	pinctrl-0 = <&clk_out_a_pin>;
+	pinctrl-names = "default";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ccu CLK_OUT_A>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+	usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
new file mode 100644
index 000000000..3def2a330
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_mmc3_vdd: mmc3_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: gmac_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000..358ed5f1b
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
new file mode 100644
index 000000000..413505f45
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
new file mode 100644
index 000000000..946c27278
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		green {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led-pins {
+		pins = "PH20","PH21";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 000000000..17fa8901f
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: ethernet-switch@1e {
+			compatible = "brcm,bcm53125";
+			reg = <30>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					label = "lan2";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					label = "lan4";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					label = "wan";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					label = "lan1";
+				};
+
+				port8: port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&gmac>;
+					phy-mode = "rgmii-txid";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>,
+		    <&spi0_cs1_pi_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 000000000..da5a2eea4
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
new file mode 100644
index 000000000..6bff9e731
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
new file mode 100644
index 000000000..1491c603f
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+	remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
new file mode 100644
index 000000000..20bf09b22
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som-evb.dts"
+
+/ {
+
+	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 000000000..6f9c54b8e
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,329 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button-980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button-1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button-1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olimex_som_evb: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
new file mode 100644
index 000000000..a59755a2e
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB-eMMC Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-olimex-som204-evb.dts"
+
+/ {
+	model = "Olimex A20-SOM204-EVB-eMMC";
+	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
new file mode 100644
index 000000000..230d62a6b
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for A20-SOM204-EVB Board
+ *
+ * Copyright (C) 2018 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A20-SOM204-EVB";
+	compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		ethernet1 = &rtl8723bs;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		stat {
+			label = "a20-som204-evb:green:stat";
+			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led1 {
+			label = "a20-som204-evb:green:led1";
+			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led2 {
+			label = "a20-som204-evb:yellow:led2";
+			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	rtl_pwrseq: rtl_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy3>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Exposed to UEXT1 */
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/* Exposed to UEXT2 */
+&i2c2 {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		reset-assert-us = <10000>;
+		/* wait 1s after reset, otherwise fail to read phy id */
+		reset-deassert-us = <1000000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&rtl_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	uart3_rts_pin: uart3-rts-pin {
+		pins = "PG8";
+		function = "uart3";
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Used for RTL8723BS bluetooth */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>;
+	status = "okay";
+};
+
+/* Exposed to UEXT1 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+/* Exposed to UEXT2 */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000..033cab344
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000..2adbac860
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,216 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
new file mode 100644
index 000000000..decb014a3
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -0,0 +1,69 @@
+ /*
+ * Copyright 2015 - Ultimaker B.V.
+ * Author Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-lime2.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2-eMMC";
+	compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 000000000..488933b87
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_ldo3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_ldo4>;
+
+	led_pins_olinuxinolime: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1300000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi1";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
new file mode 100644
index 000000000..2337b44a8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
@@ -0,0 +1,68 @@
+ /*
+ * Copyright 2017 Olimex Ltd.
+ * Stefan Mavrodiev <stefan@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-olinuxino-micro.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-MICRO-eMMC";
+	compatible = "olimex,a20-olinuxino-micro-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 000000000..359bd0d5b
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
+
+	button-392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
+
+	button-601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
+
+	button-795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button-987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+
+	button-1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
+
+	button-1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+
+	led_pins_olinuxino: led-pins {
+		pins = "PH2";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pi_pins>,
+		    <&spi1_cs0_pi_pin>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pc_pins>,
+		    <&spi2_cs0_pc_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pi_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 000000000..2e328d2ce
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,242 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		blue {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
new file mode 100644
index 000000000..d75b2e2ba
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -0,0 +1,201 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 000000000..bf38c66c1
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* Marked "LED3" on the PCB. */
+		usr1 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		/* Marked "LED4" on the PCB. */
+		usr2 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
new file mode 100644
index 000000000..cc8271d77
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		home {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		menu {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pin>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 000000000..6a66b0432
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 000000000..3bfae98f3
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
new file mode 100644
index 000000000..6d6a37940
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -0,0 +1,1712 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+				 <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+				 <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	1000000
+				>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk-mii-phy-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk-gmac-int-tx {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@1c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+
+	de: display-engine {
+		compatible = "allwinner,sun7i-a20-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <4>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_CSI0>;
+			status = "disabled";
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun7i-a20-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun7i-a20-crypto",
+				     "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun7i-a20-hdmi",
+				     "allwinner,sun5i-a10s-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun7i-a20-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			clk_out_b_pin: clk-out-b-pin {
+				pins = "PI13";
+				function = "clk_out_b";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_clk_pin: csi-clk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			emac_pa_pins: emac-pa-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			emac_ph_pins: emac-ph-pins {
+				pins = "PH8", "PH9", "PH10", "PH11",
+				       "PH14", "PH15", "PH16", "PH17",
+				       "PH18", "PH19", "PH20", "PH21",
+				       "PH22", "PH23", "PH24", "PH25",
+				       "PH26";
+				function = "emac";
+			};
+
+			/omit-if-no-ref/
+			gmac_mii_pins: gmac-mii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "gmac";
+			};
+
+			/omit-if-no-ref/
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				        "PA7", "PA8", "PA10",
+				       "PA11", "PA12", "PA13",
+				       "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			ir0_rx_pin: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir0_tx_pin: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			/omit-if-no-ref/
+			ir1_rx_pin: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			ir1_tx_pin: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc2_pins: mmc2-pins {
+				pins = "PC6", "PC7", "PC8",
+				       "PC9", "PC10", "PC11";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			ps2_0_pins: ps2-0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			ps2_1_ph_pins: ps2-1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			/omit-if-no-ref/
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs1_pi_pin: spi0-cs1-pi-pin {
+				pins = "PI14";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			spi2_cs0_pc_pin: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pa_pins: uart2-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_ph_pins: uart3-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
+				pins = "PH2", "PH3";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart4_ph_pins: uart4-ph-pins {
+				pins = "PH4", "PH5";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart5_pi_pins: uart5-pi-pins {
+				pins = "PI10", "PI11";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart6_pa_pins: uart6-pa-pins {
+				pins = "PA12", "PA13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart6_pi_pins: uart6-pi-pins {
+				pins = "PI12", "PI13";
+				function = "uart6";
+			};
+
+			/omit-if-no-ref/
+			uart7_pa_pins: uart7-pa-pins {
+				pins = "PA14", "PA15";
+				function = "uart7";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 4>,
+			       <&dma SUN4I_DMA_NORMAL 4>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		i2s2: i2s@1c24400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c24400 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 6>,
+			       <&dma SUN4I_DMA_NORMAL 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun7i-a20-can",
+				     "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		hstimer@1c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_HSTIMER>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun7i-a20-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun7i-a20-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
new file mode 100644
index 000000000..c1362d0f0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -0,0 +1,850 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
+			status = "disabled";
+		};
+	};
+
+	de: display-engine {
+		/* compatible gets set in SoC specific dtsi file */
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		ext_osc32k: ext_osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun8i-a23-nand-controller";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			dmas = <&dma 5>;
+			dma-names = "rxtx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH2", "PH3";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH4", "PH5";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+				       "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			nand_pins: nand-pins {
+				pins = "PC0", "PC1", "PC2", "PC5",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14", "PC15";
+				function = "nand0";
+			};
+
+			nand_cs0_pin: nand-cs0-pin {
+				pins = "PC4";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_cs1_pin: nand-cs1-pin {
+				pins = "PC3";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb0_pin: nand-rb0-pin {
+				pins = "PC6";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			nand_rb1_pin: nand-rb1-pin {
+				pins = "PC7";
+				function = "nand0";
+				bias-pull-up;
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PH0";
+				function = "pwm0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pg_pins: uart1-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-a23-mali",
+				     "allwinner,sun7i-a20-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_be0: endpoint {
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e60000 0x10000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_BE>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					reg = <0>;
+
+					be0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@1e70000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun8i-a23-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&ext_osc32k>;
+			#clock-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@1f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+
+			codec_analog: codec-analog {
+				compatible = "allwinner,sun8i-a23-codec-analog";
+			};
+		};
+
+		cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+
+			r_uart_pins_a: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts
new file mode 100644
index 000000000..53fb1be04
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-evb.dts
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner A23 Evaluation Board";
+	compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 000000000..bcbc9b075
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GT90H Dual Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
new file mode 100644
index 000000000..d4405752a
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-86DZ Rev 01";
+	compatible = "primux,inet86dz", "allwinner,sun8i-a23";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
new file mode 120000
index 000000000..c2f22fc33
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
new file mode 120000
index 000000000..c2f22fc33
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1 @@
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
new file mode 100644
index 000000000..d5f6aebd7
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2407PXE03 tablet";
+	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
new file mode 100644
index 000000000..9f9232a2f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Polaroid MID2809PXE04 tablet";
+	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
new file mode 100644
index 000000000..51097c77a
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"Speaker", "HP",
+		"MIC1", "Mic",
+		"MIC2", "Headset Mic",
+		"Mic",  "MBIAS",
+		"Headset Mic", "HBIAS";
+	status = "okay";
+};
+
+&panel {
+	compatible = "bananapi,s070wv20-ct16";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
new file mode 100644
index 000000000..a5e884a8b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+	soc {
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a23-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a23-display-backend";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a23-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a23-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a23-display-frontend";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a23-pinctrl";
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a23-tcon";
+};
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
new file mode 120000
index 000000000..4519fd791
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
new file mode 100644
index 000000000..2dfdd0a31
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
+&lradc {
+	button-600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 000000000..317763069
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		home {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led-pin {
+		pins = "PL5";
+		function = "gpio_out";
+		drive-strength = <20>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>,
+		    <&uart1_cts_rts_pg_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
new file mode 120000
index 000000000..4519fd791
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -0,0 +1 @@
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
new file mode 100644
index 000000000..a1953b287
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
new file mode 100644
index 000000000..9c5750c25
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
new file mode 100644
index 000000000..785798e3a
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -0,0 +1,274 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA33";
+	compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "netron-dy,e231732";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_dcdc1>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
new file mode 100644
index 000000000..46f4242e9
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -0,0 +1,431 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&ths>;
+	};
+
+	mali_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-144000000 {
+			opp-hz = /bits/ 64 <144000000>;
+		};
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun8i-a33-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&link_codec>;
+		simple-audio-card,bitclock-master = <&link_codec>;
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&dai>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	soc {
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-a33-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SS>;
+			reset-names = "ahb";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun6i-a31-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: ths@1c25000 {
+			compatible = "allwinner,sun8i-a33-ths";
+			reg = <0x01c25000 0x100>;
+			#thermal-sensor-cells = <0>;
+			#io-channel-cells = <0>;
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&mali 1 THERMAL_NO_LIMIT>;
+				};
+
+				map3 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&mali 2 THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert0: gpu_alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpu_alert1: gpu_alert1 {
+					/* milliCelsius */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&be0 {
+	compatible = "allwinner,sun8i-a33-display-backend";
+	/* A33 has an extra "SAT" module packed inside the display backend */
+	reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+	reg-names = "be", "sat";
+	clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+		 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+	clock-names = "ahb", "mod",
+		      "ram", "sat";
+	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+	reset-names = "be", "sat";
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
+&de {
+	compatible = "allwinner,sun8i-a33-display-engine";
+};
+
+&drc0 {
+	compatible = "allwinner,sun8i-a33-drc";
+};
+
+&fe0 {
+	compatible = "allwinner,sun8i-a33-display-frontend";
+};
+
+&mali {
+	operating-points-v2 = <&mali_opp_table>;
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pb_pins: uart0-pb-pins {
+		pins = "PB0", "PB1";
+		function = "uart0";
+	};
+
+};
+
+&tcon0 {
+	compatible = "allwinner,sun8i-a33-tcon";
+};
+
+&tcon0_out {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	tcon0_out_dsi: endpoint@1 {
+		reg = <1>;
+		remote-endpoint = <&dsi_in_tcon0>;
+	};
+};
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000..9c006fc18
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb0_vbus: reg-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ephy";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
new file mode 100644
index 000000000..431f70234
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -0,0 +1,407 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M3";
+	compatible = "sinovoip,bpi-m3", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bananapi-m3:blue:usr";
+			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapi-m3:green:usr";
+			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+
+	/* TODO GL830 USB-to-SATA bridge downstream w/ GPIO power controls */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_sw>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	allwinner,rx-delay-ps = <700>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_cir {
+	clock-frequency = <3000000>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		fldoin-supply = <&reg_dcdc5>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/* schematics says 3.1V but FEX file says 3.3V */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	/*
+	 * This powers both the WiFi/BT module's main power, I/O supply,
+	 * and external pull-ups on all the data lines. It should be set
+	 * to the same voltage as the I/O supply (DCDC1 in this case) to
+	 * avoid any leakage or mismatch.
+	 */
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	/*
+	 * The PHY requires 20ms after all voltages
+	 * are applied until core logic is ready and
+	 * 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC
+	 * ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-ephy";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000..d8326a5c6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,464 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "cubietruck-plus:blue:usr";
+			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+		};
+
+		orange {
+			label = "cubietruck-plus:orange:usr";
+			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
+		};
+
+		white {
+			label = "cubietruck-plus:white:usr";
+			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
+		};
+
+		green {
+			label = "cubietruck-plus:green:usr";
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+		};
+	};
+
+	usb-hub {
+		/* I2C is not connected */
+		compatible = "smsc,usb3503";
+		initial-mode = <1>; /* initialize in HUB mode */
+		disabled-ports = <1>;
+		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		refclk-frequency = <19200000>;
+	};
+
+	reg_usb1_vbus: reg-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+	};
+
+	reg_usb2_vbus: reg-usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* The WiFi low power clock must be 32768 Hz */
+		assigned-clocks = <&ac100_rtc 1>;
+		assigned-clock-rates = <32768>;
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	/* GL830 USB-to-SATA bridge here */
+	status = "okay";
+};
+
+&ehci1 {
+	/* USB3503 HSIC USB 2.0 hub here */
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_dldo4>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_sw>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp818", "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp81x.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dram-pll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	/*
+	 * The schematics say this should be 3.3V, but the FEX file says
+	 * it should be 3V. The latter makes sense, as the WiFi module's
+	 * I/O is indirectly powered from DCDC1, through SW. It is rated
+	 * at 2.98V maximum.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpua";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpub";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "dp-pwr";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "ephy-io";
+};
+
+&reg_dldo4 {
+	/*
+	 * The PHY requires 20ms after all voltages are applied until core
+	 * logic is ready and 30ms after the reset pin is de-asserted.
+	 * Set a 100ms delay to account for PMIC ramp time and board traces.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ephy";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-1";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "dp-bridge-2";
+};
+
+&reg_fldo1 {
+	/* TODO should be handled by USB PHY */
+	regulator-always-on;
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd12-hsic";
+};
+
+&reg_fldo2 {
+	/*
+	 * Despite the embedded CPUs core not being used in any way,
+	 * this must remain on or the system will hang.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&reg_sw {
+	regulator-name = "vcc-wifi-io";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dcdc1>;
+		vddio-supply = <&reg_sw>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
new file mode 100644
index 000000000..bfc9bb277
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2017 Touchless Biometric Systems AG
+ * Tomas Novotny <tomas@novotny.cz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS A711 Tablet";
+	compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+	};
+
+	panel {
+		compatible = "tbs,a711-panel", "panel-lvds";
+		backlight = <&backlight>;
+		power-supply = <&reg_sw>;
+
+		width-mm = <153>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <52000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <20>;
+			hfront-porch = <180>;
+			hback-porch = <160>;
+			vfront-porch = <12>;
+			vback-porch = <23>;
+			vsync-len = <5>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	reg_gps: reg-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "gps";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reg_vmain: reg-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "vmain";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vbat>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+
+		/*
+		 * This is actually Bluetooth's clock, but we have to
+		 * hook it up somewheere
+		 */
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&de {
+	status = "okay";
+};
+
+/*
+ * An USB-2 hub is connected here, which also means we don't need to
+ * enable the OHCI controller.
+ */
+&ehci0 {
+	status = "okay";
+};
+
+/*
+ * There's a modem connected here that needs to be initialised before
+ * being able to be enumerated.
+ */
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+		vcc-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_dldo1>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pin>;
+	status = "okay";
+};
+
+&r_lradc {
+	vref-supply = <&reg_aldo2>;
+	status = "okay";
+
+	button-210 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <210000>;
+	};
+
+	button-410 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <410000>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp81x: pmic@3a3 {
+		compatible = "x-powers,axp813";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		swin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&r_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+};
+
+#include "axp81x.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1.8";
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-name = "vdd-drampll";
+};
+
+&reg_aldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-always-on;
+	regulator-name = "vcc-io";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-A";
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpu-B";
+};
+
+&reg_dcdc4 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc5 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-always-on;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-always-on;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <4200000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-r";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dsi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi-f";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-hsic";
+};
+
+&reg_fldo2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-always-on;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-vb";
+	status = "okay";
+};
+
+&reg_sw {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+	regulator-name = "vcc-lcd";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_lvds_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_lcd: endpoint {
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6210 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vbat>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		max-speed = <1500000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pb_pins>;
+	status = "okay";
+
+	gnss {
+		compatible = "u-blox,neo-6m";
+
+		v-bckp-supply = <&reg_rtc_ldo>;
+		vcc-supply = <&reg_gps>;
+		current-speed = <9600>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vmain>;
+	usb2_vbus-supply = <&reg_vmain>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 000000000..a746e449b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,1274 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C0CPUX>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cci-control-port = <&cci_control0>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <3>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x100>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x101>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x102>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			clocks = <&ccu CLK_C1CPUX>;
+			operating-points-v2 = <&cpu1_opp_table>;
+			cci-control-port = <&cci_control1>;
+			enable-method = "allwinner,sun8i-a83t-smp";
+			reg = <0x103>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-a83t-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	cpu0_opp_table: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpu1_opp_table: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1128000000 {
+			opp-hz = /bits/ 64 <1128000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <840000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-a83t-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_PLL_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+
+					mixer0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-a83t-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					mixer1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_mixer1>;
+					};
+
+					mixer1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun8i-a83t-cpucfg";
+			reg = <0x01700000 0x400>;
+		};
+
+		cci@1790000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01790000 0x10000>;
+			ranges = <0x0 0x01790000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-a83t-system-controller",
+				"syscon";
+			reg = <0x01c00000 0x1000>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-a83t-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-a83t-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-a83t-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun8i-a83t-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-a83t-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a83t-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-a83t-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x14>,
+			      <0x01c1b800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_HSIC>,
+				 <&ccu CLK_USB_HSIC_12M>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb2_hsic_12M";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_HSIC>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-a83t-ohci",
+				     "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-a83t-ehci",
+				     "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+				pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+				       "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+				       "PD11", "PD12", "PD13", "PD14", "PD18",
+				       "PD19", "PD21", "PD22", "PD23";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c2_pe_pins: i2c2-pe-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			i2c2_ph_pins: i2c2-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c2";
+			};
+
+			i2s1_pins: i2s1-pins {
+				/* I2S1 does not have external MCLK pin */
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			lcd_lvds_pins: lcd-lvds-pins {
+				pins = "PD18", "PD19", "PD20", "PD21", "PD22",
+				       "PD23", "PD24", "PD25", "PD26", "PD27";
+				function = "lvds0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD28";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PE18";
+				function = "spdif";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart2_pb_pins: uart2-pb-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_pins>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-a83t-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-a83t-pwm",
+				     "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun8i-a83t-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-a83t-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x104>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-a83t-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+
+			csi_in: port {
+			};
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-a83t-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-a83t-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-a83t-r-ccu";
+			reg = <0x01f01400 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
+				 <&ccu CLK_PLL_PERIPH>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_cpucfg@1f01c00 {
+			compatible = "allwinner,sun8i-a83t-r-cpucfg";
+			reg = <0x1f01c00 0x400>;
+		};
+
+		r_cir: ir@1f02000 {
+			compatible = "allwinner,sun8i-a83t-ir",
+				"allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_cir_pin>;
+			status = "disabled";
+		};
+
+		r_lradc: lradc@1f03c00 {
+			compatible = "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01f03c00 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-a83t-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_cir_pin: r-cir-pin {
+				pins = "PL12";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a83t-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_APB0_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 000000000..4c6704e4c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..4db0d4bb6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H2+";
+	compatible = "libretech,all-h3-cc-h2-plus", "allwinner,sun8i-h2-plus";
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
new file mode 100644
index 000000000..3356f4210
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Orange Pi R1 is based on Orange Pi Zero design */
+#include "sun8i-h2-plus-orangepi-zero.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1";
+	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
+
+	/delete-node/ reg_vcc_wifi;
+
+	/*
+	 * Ths pin of this regulator is the same with the Wi-Fi extra
+	 * regulator on the original Zero. However it's used for USB
+	 * Ethernet rather than the Wi-Fi now.
+	 */
+	reg_vcc_usb_eth: reg-vcc-usb-ethernet {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-usb-ethernet";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	aliases {
+		ethernet1 = &rtl8189etv;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
+	};
+};
+
+&ohci1 {
+	/*
+	 * RTL8152B USB-Ethernet adapter is connected to USB1,
+	 * and it's a USB 2.0 device. So the OHCI1 controller
+	 * can be left disabled.
+	 */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usb_eth>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
new file mode 100644
index 000000000..3706216ff
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-orangepi-one.dts, which is:
+ *   Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero";
+	compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &xr819;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc_wifi: reg_vcc_wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc-wifi";
+		enable-active-high;
+		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	xr819: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0 {
+	/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/*
+	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
+	 * power up the board; when it's used as OTG port, this VBUS is
+	 * always off even if the board is powered via GPIO pins.
+	 */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000..fc4a8c3d0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H3";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
new file mode 100644
index 000000000..195a75da1
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H3";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
new file mode 100644
index 000000000..45a24441f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Beelink X2";
+	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		ethernet1 = &sdiowifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "beelink-x2:blue:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		red {
+			label = "beelink-x2:red:standby";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+
+	sound_spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	sdiowifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on except for the OTG port */
+	status = "okay";
+	usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000..02fbe00cd
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000..eedd5da5d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..a8b2f0f1c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-libretech-all-h3-cc.dtsi"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H3";
+	compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
new file mode 100644
index 000000000..ff0a7a952
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Centrum Embedded Systems, Jia-Bin Huang <jb@ces.com.tw>
+ * Copyright (C) 2018 Jonathan McDowell <noodles@earth.li>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MapleBoard MP130";
+	compatible = "mapleboard,mp130", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "mp130:orange:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "mp130:orange:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+
+		user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 000000000..8722fdf77
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		k1 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
new file mode 100644
index 000000000..4ba533b03
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1 Plus";
+	compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart3;
+		ethernet0 = &emac;
+		ethernet1 = &sdio_wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 000000000..69243dcb3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
new file mode 100644
index 000000000..07867a0d5
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 000000000..9f33f6fae
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
new file mode 100644
index 000000000..4df29a653
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "k1";
+
+		k1 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
new file mode 100644
index 000000000..597c425d0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi 2";
+	compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+	};
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+	allwinner,audio-routing =
+		"Speaker", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 000000000..6f9c97add
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
new file mode 100644
index 000000000..4759ba3f2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi One";
+	compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 000000000..babf4cf1b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
new file mode 100644
index 000000000..5aff8ecc6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi PC";
+	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* VBUS on USB host ports are always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 000000000..d05fa679d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi Plus is an extended version of the Orange Pi 2 */
+#include "sun8i-h3-orangepi-2.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus / Plus 2";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+	/* eMMC is missing pull-ups */
+	bias-pull-up;
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&usbphy {
+	usb3_vbus-supply = <&reg_usb3_vbus>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 000000000..b6ca45d18
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
new file mode 100644
index 000000000..251bbab7d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2 H3";
+	compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
new file mode 100644
index 000000000..4738f3a9e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Bootlin
+ * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "RerVision H3-DVK";
+	compatible = "rervision,h3-dvk", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
new file mode 100644
index 000000000..ae4f933ab
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
new file mode 100644
index 000000000..3d9a1524e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	panel: panel {
+		/* Tablet dts should provide panel compatible */
+		backlight = <&backlight>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_lcd>;
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status  = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi-pwrseq-pins {
+		pins = "PL6", "PL7", "PL11";
+		function = "gpio_in";
+		bias-pull-up;
+	};
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
new file mode 100644
index 000000000..e1c75f7fa
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -0,0 +1,311 @@
+/*
+ * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi M2 Magic";
+	compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "bpi-m2m:blue:usr";
+			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "bpi-m2m:green:usr";
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "bpi-m2m:red:power";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+	opp-1104000000 {
+		opp-hz = /bits/ 64 <1104000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+
+	opp-1200000000 {
+		opp-hz = /bits/ 64 <1200000000>;
+		opp-microvolt = <1320000>;
+		clock-latency-ns = <244144>; /* 8 32k periods */
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_aldo3>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
new file mode 100644
index 000000000..246dec584
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com> */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Nintendo NES Classic Edition";
+	compatible = "nintendo,nes-classic", "allwinner,sun8i-r16",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	/*
+	 * UART0 is available on two ports: PB and PF, both are accessible.
+	 * PF can also be used for the SD card so PB is preferred.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pf_pins>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+
+	/* 2Gb Macronix MX30LF2G18AC (3V) */
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	/* VBUS is always on because it is wired to the power supply */
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
new file mode 100644
index 000000000..80761d790
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/* Copyright (c) 2018 Miquèl RAYNAL <miquel.raynal@bootlin.com> */
+
+/dts-v1/;
+#include "sun8i-r16-nintendo-nes-classic.dts"
+
+/ {
+	model = "Nintendo SuperNES Classic Edition";
+	compatible = "nintendo,super-nes-classic", "nintendo,nes-classic",
+		     "allwinner,sun8i-r16", "allwinner,sun8i-a33";
+};
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
new file mode 100644
index 000000000..4f48eec6b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -0,0 +1,313 @@
+/*
+ * Copyright 2016 Quentin Schulz
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Allwinner R16 EVB (Parrot)";
+	compatible = "allwinner,parrot", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "parrot:led1:usr";
+			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+
+		led2 {
+			label = "parrot:led2:usr";
+			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * FIXME: An as-yet-unknown accelerometer is connected to this
+	 * i2c bus.
+	 */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-190 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button-390 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	/*
+	 * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.
+	 * Remove next line once it is possible to sync two regulators.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0-csi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-dsp";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "eldo3";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 000000000..a6a1087a0
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led-green {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led-blue {
+			label = "bananapi:blue:user";
+			gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&ir0 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
new file mode 100644
index 000000000..7907569e7
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -0,0 +1,1155 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
new file mode 100644
index 000000000..b3d8b8f05
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-reference-design-tablet.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
new file mode 100644
index 000000000..d18192d51
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sipeed Lichee Zero Plus";
+	compatible = "sipeed,lichee-zero-plus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
new file mode 100644
index 000000000..4aa0ee897
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp203",
+			     "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
new file mode 100644
index 000000000..6931aaab2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2018 Hao Zhang <hao5781286@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "t3-cqa3t-bv3";
+	compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3",
+		     "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dldo3";
+};
+
+&reg_eldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
new file mode 100644
index 000000000..ca4672ed2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
new file mode 100644
index 000000000..db5cd0b85
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-v3s-licheepi-zero.dts"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lichee Pi Zero with Dock";
+	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
+		     "allwinner,sun8i-v3s";
+
+	leds {
+		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
+		status = "disabled";
+	};
+};
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button-600 {
+		label = "Select";
+		linux,code = <KEY_SELECT>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button-800 {
+		label = "Start";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 000000000..2e4587d26
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue_led {
+			label = "licheepi:blue:usr";
+			gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
+		};
+
+		green_led {
+			label = "licheepi:green:usr";
+			gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+			default-state = "on";
+		};
+
+		red_led {
+			label = "licheepi:red:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
new file mode 100644
index 000000000..b21ecb820
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -0,0 +1,550 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI1_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 000000000..47954551f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,305 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr-led {
+			label = "bananapi:red:pwr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led {
+			label = "bananapi:green:user";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo3>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		/* TODO host wake line connected to PMIC GPIO pins */
+		shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+		max-speed = <1500000>;
+	};
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
new file mode 100644
index 000000000..484b93df2
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,508 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		red {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
+	};
+
+	vga-connector {
+		compatible = "vga-connector";
+		label = "vga";
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_dac_out>;
+			};
+		};
+	};
+
+	vga-dac {
+		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
+		vdd-supply = <&reg_dcdc1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_dac_in: endpoint {
+					remote-endpoint = <&tcon0_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_dac_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dc1sw>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc1sw: dc1sw {
+				regulator-name = "vcc-pd";
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd0_rgb888_pins>;
+};
+
+&tcon0_out {
+	tcon0_out_vga: endpoint {
+		remote-endpoint = <&vga_dac_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
new file mode 100644
index 000000000..5c3580d71
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -0,0 +1,510 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* The LED names match those found on the board */
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		/* enables internal regulator and de-asserts reset */
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_cldo1>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_cldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc1_pins {
+	bias-pull-up;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
+&pio {
+	vcc-pa-supply = <&reg_ldo_io1>;
+	vcc-pb-supply = <&reg_aldo2>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_eldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_ldo_io0>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_dldo2>;
+	vcc-pm-supply = <&reg_eldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp809: pmic@3a3 {
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				/*
+				 * TODO: This should be handled by the
+				 * USB PHY driver.
+				 */
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc33-usbh";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pb-io-cam";
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_dc5ldo: dc5ldo {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus-09-usbh";
+			};
+
+			dc1sw {
+				/* unused */
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdc4: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-usb0-hdmi";
+			};
+
+			reg_dcdc5: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1425000>;
+				regulator-max-microvolt = <1575000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dldo1: dldo1 {
+				/*
+				 * The WiFi chip supports a wide range
+				 * (3.0 ~ 4.8V) of voltages, and so does
+				 * this regulator (3.0 ~ 4.2V), but
+				 * Allwinner SDK always sets it to 3.3V.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi";
+			};
+
+			reg_dldo2: dldo2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_eldo1: eldo1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dvdd-cam";
+			};
+
+			reg_eldo2: eldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pe";
+			};
+
+			reg_eldo3: eldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pm-codec-io1";
+			};
+
+			reg_ldo_io0: ldo_io0 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-pg";
+			};
+
+			reg_ldo_io1: ldo_io1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc-pa-gmac-2v5";
+			};
+
+			reg_rtc_ldo: rtc_ldo {
+				regulator-name = "vcc-rtc-vdd1v8-io";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				/*
+				 * The PHY requires 20ms after all voltages
+				 * are applied until core logic is ready and
+				 * 30ms after the reset pin is de-asserted.
+				 * Set a 100ms delay to account for PMIC
+				 * ramp time and board traces.
+				 */
+				regulator-enable-ramp-delay = <100000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+};
+
+#include "axp809.dtsi"
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
new file mode 100644
index 000000000..ce4fa6706
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -0,0 +1,1254 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			cci-control-port = <&cci_control0>;
+			clock-frequency = <12000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			cci-control-port = <&cci_control1>;
+			clock-frequency = <18000000>;
+			enable-method = "allwinner,sun9i-a80-smp";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
+		 */
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clock-output-names = "osc32k";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
+		 */
+		mii_phy_tx_clk: mii_phy_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: gmac_int_tx_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@800030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x00800030 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		cpus_clk: clk@8001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>,
+				 <&ccu CLK_PLL_PERIPH0>,
+				 <&ccu CLK_PLL_AUDIO>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: clk-ahbs {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@8001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@8001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@8001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun9i-a80-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	soc@20000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		sram_b: sram@20000 {
+			/* 256 KiB secure SRAM at 0x20000 */
+			compatible = "mmio-sram";
+			reg = <0x00020000 0x40000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00020000 0x40000>;
+
+			smp-sram@1000 {
+				/*
+				 * This is checked by BROM to determine if
+				 * cpu0 should jump to SMP entry vector
+				 */
+				compatible = "allwinner,sun9i-a80-smp-sram";
+				reg = <0x1000 0x8>;
+			};
+		};
+
+		gmac: ethernet@830000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x00830000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ehci0: usb@a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI0>,
+				 <&usb_clocks CLK_USB_OHCI0>;
+			resets = <&usb_clocks RST_USB0_HCI>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_clocks CLK_USB0_PHY>;
+			clock-names = "phy";
+			resets = <&usb_clocks RST_USB0_PHY>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI1>;
+			resets = <&usb_clocks RST_USB1_HCI>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_clocks CLK_USB1_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clocks CLK_BUS_HCI2>,
+				 <&usb_clocks CLK_USB_OHCI2>;
+			resets = <&usb_clocks RST_USB2_HCI>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_clocks CLK_USB2_PHY>,
+				 <&usb_clocks CLK_USB_HSIC>,
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
+				      "hsic_12M",
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		usb_clocks: clock@a08000 {
+			compatible = "allwinner,sun9i-a80-usb-clks";
+			reg = <0x00a08000 0x8>;
+			clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+			clock-names = "bus", "hosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		cpucfg@1700000 {
+			compatible = "allwinner,sun9i-a80-cpucfg";
+			reg = <0x01700000 0x100>;
+		};
+
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun9i-a80-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc_config_clk: clk@1c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ccu CLK_BUS_MMC>;
+			resets = <&ccu RST_BUS_MMC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@1c41000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x2000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@1c90000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01c90000 0x1000>;
+			ranges = <0x0 0x01c90000 0x10000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				 compatible = "arm,cci-400-pmu,r1";
+				 reg = <0x9000 0x5000>;
+				 interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		de_clocks: clock@3000000 {
+			compatible = "allwinner,sun9i-a80-de-clks";
+			reg = <0x03000000 0x30>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_SDRAM>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "dram",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		fe0: display-frontend@3100000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03100000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+				 <&de_clocks CLK_DRAM_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					reg = <1>;
+
+					fe0_out_deu0: endpoint {
+						remote-endpoint = <&deu0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@3140000 {
+			compatible = "allwinner,sun9i-a80-display-frontend";
+			reg = <0x03140000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+				 <&de_clocks CLK_DRAM_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					reg = <1>;
+
+					fe1_out_deu1: endpoint {
+						remote-endpoint = <&deu1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@3200000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03200000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+				 <&de_clocks CLK_DRAM_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be0>;
+					};
+
+					be0_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					reg = <1>;
+
+					be0_out_drc0: endpoint {
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@3240000 {
+			compatible = "allwinner,sun9i-a80-display-backend";
+			reg = <0x03240000 0x40000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+				 <&de_clocks CLK_DRAM_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_clocks RST_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_deu0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&deu0_out_be1>;
+					};
+
+					be1_in_deu1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&deu1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					reg = <1>;
+
+					be1_out_drc1: endpoint {
+						remote-endpoint = <&drc1_in_be1>;
+					};
+				};
+			};
+		};
+
+		deu0: deu@3300000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03300000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU0>,
+				 <&de_clocks CLK_IEP_DEU0>,
+				 <&de_clocks CLK_DRAM_DEU0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu0_in: port@0 {
+					reg = <0>;
+
+					deu0_in_fe0: endpoint {
+						remote-endpoint = <&fe0_out_deu0>;
+					};
+				};
+
+				deu0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu0>;
+					};
+
+					deu0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu0>;
+					};
+				};
+			};
+		};
+
+		deu1: deu@3340000 {
+			compatible = "allwinner,sun9i-a80-deu";
+			reg = <0x03340000 0x40000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DEU1>,
+				 <&de_clocks CLK_IEP_DEU1>,
+				 <&de_clocks CLK_DRAM_DEU1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DEU1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				deu1_in: port@0 {
+					reg = <0>;
+
+					deu1_in_fe1: endpoint {
+						remote-endpoint = <&fe1_out_deu1>;
+					};
+				};
+
+				deu1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					deu1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_deu1>;
+					};
+
+					deu1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_deu1>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@3400000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03400000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC0>,
+				 <&de_clocks CLK_IEP_DRC0>,
+				 <&de_clocks CLK_DRAM_DRC0>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					reg = <0>;
+
+					drc0_in_be0: endpoint {
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
+		};
+
+		drc1: drc@3440000 {
+			compatible = "allwinner,sun9i-a80-drc";
+			reg = <0x03440000 0x40000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&de_clocks CLK_BUS_DRC1>,
+				 <&de_clocks CLK_IEP_DRC1>,
+				 <&de_clocks CLK_DRAM_DRC1>;
+			clock-names = "ahb",
+				      "mod",
+				      "ram";
+			resets = <&de_clocks RST_DRC1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc1_in: port@0 {
+					reg = <0>;
+
+					drc1_in_be1: endpoint {
+						remote-endpoint = <&be1_out_drc1>;
+					};
+				};
+
+				drc1_out: port@1 {
+					reg = <1>;
+
+					drc1_out_tcon1: endpoint {
+						remote-endpoint = <&tcon1_in_drc1>;
+					};
+				};
+			};
+		};
+
+		tcon0: lcd-controller@3c00000 {
+			compatible = "allwinner,sun9i-a80-tcon-lcd";
+			reg = <0x03c00000 0x10000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+			clock-names = "ahb", "tcon-ch0";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_drc0: endpoint {
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		tcon1: lcd-controller@3c10000 {
+			compatible = "allwinner,sun9i-a80-tcon-tv";
+			reg = <0x03c10000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+			reset-names = "lcd", "edp";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					reg = <0>;
+
+					tcon1_in_drc1: endpoint {
+						remote-endpoint = <&drc1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ccu: clock@6000000 {
+			compatible = "allwinner,sun9i-a80-ccu";
+			reg = <0x06000000 0x800>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		timer@6000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@6000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@6000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5",
+				       "PA7", "PA8", "PA9", "PA10", "PA12",
+				       "PA13", "PA15", "PA16", "PA17";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			lcd0_rgb888_pins: lcd0-rgb888-pins {
+				pins = "PD0", "PD1", "PD2", "PD3",
+				       "PD4", "PD5", "PD6", "PD7",
+				       "PD8", "PD9", "PD10", "PD11",
+				       "PD12", "PD13", "PD14", "PD15",
+				       "PD16", "PD17", "PD18", "PD19",
+				       "PD20", "PD21", "PD22", "PD23",
+				       "PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1" ,"PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12",
+				       "PC13", "PC14", "PC15",
+				       "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH12", "PH13";
+				function = "uart0";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PG12", "PG13", "PG14", "PG15";
+				function = "uart4";
+			};
+		};
+
+		uart0: serial@7000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@7000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@7000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@7000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@7001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@7001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@7002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@7003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@7003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@7003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@8001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		prcm@8001400 {
+			compatible = "allwinner,sun9i-a80-prcm";
+			reg = <0x08001400 0x200>;
+		};
+
+		apbs_rst: reset@80014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@80015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@8002000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
+		r_uart: serial@8002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@8002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			resets = <&apbs_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r-ir-pins {
+				pins = "PL6";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PN0", "PN1";
+				function = "s_rsb";
+				drive-strength = <20>;
+				bias-pull-up;
+			};
+		};
+
+		r_rsb: rsb@8003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000..a1154e6c7
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
new file mode 100644
index 000000000..def830101
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 38>;
+			resets = <&ccu 24>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 39>;
+			resets = <&ccu 25>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu 40>;
+			resets = <&ccu 26>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000..235994a4a
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1108475 0>, <1308475 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
new file mode 100644
index 000000000..8e5cb3b3f
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -0,0 +1,242 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-plus:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		      compatible = "regulator-fixed";
+		      regulator-name = "gmac-3v3";
+		      regulator-min-microvolt = <3300000>;
+		      regulator-max-microvolt = <3300000>;
+		      startup-delay-us = <100000>;
+		      enable-active-high;
+		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	/* USB host VBUS is on as long as VCC-IO is on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000..d8e5826fb
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,111 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000..fc67e30fe
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
new file mode 100644
index 000000000..22d533d18
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -0,0 +1,924 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0-hdmi";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+
+		framebuffer-tve {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-tve";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TVE>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext_osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-h3-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		dma-ranges;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-h3-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-h3-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@1c0f000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c0f000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c10000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			/* compatible and clocks are in per SoC .dtsi file */
+			reg = <0x01c11000 0x1000>;
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-h3-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>,
+			      <0x01c1c800 0x4>,
+			      <0x01c1d800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@1c1d000 {
+			compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+			reg = <0x01c1d000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@1c1d400 {
+			compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+			reg = <0x01c1d400 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc 0>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi";
+			};
+
+			emac_rgmii_pins: emac-rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_8bit_pins: mmc2-8bit-pins {
+				pins = "PC5", "PC6", "PC8",
+				       "PC9", "PC10", "PC11",
+				       "PC12", "PC13", "PC14",
+				       "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PA17";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PA15", "PA16", "PA14", "PA13";
+				function = "spi1";
+			};
+
+			uart0_pa_pins: uart0-pa-pins {
+				pins = "PA4", "PA5";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PA0", "PA1";
+				function = "uart2";
+			};
+
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PA13", "PA14";
+				function = "uart3";
+			};
+
+			uart3_rts_cts_pins: uart3-rts-cts-pins {
+				pins = "PA15", "PA16";
+				function = "uart3";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-h3-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-h3-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi: camera@1cb0000 {
+			compatible = "allwinner,sun8i-h3-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-h3-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-h3-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01f00000 0x400>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun8i-h3-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun8i-h3-codec-analog";
+			reg = <0x01f015c0 0x4>;
+		};
+
+		ir: ir@1f02000 {
+			compatible = "allwinner,sun6i-a31-ir";
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x400>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
new file mode 100644
index 000000000..0d002f83a
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
new file mode 100644
index 000000000..c44fd7269
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "librecomputer:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		};
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* VBUS on USB ports are always on */
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	usb3_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000..204fba361
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
new file mode 100644
index 000000000..117198c52
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
new file mode 100644
index 000000000..d584da314
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Based on Mans Rullgard's Tango3 DT
+ * https://github.com/mansr/linux-tangox
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define  CPU_CLK	0
+#define  SYS_CLK	1
+#define  USB_CLK	2
+#define SDIO_CLK	3
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	periph_clk: periph_clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&clkgen CPU_CLK>;
+		clock-mult = <1>;
+		clock-div  = <2>;
+		#clock-cells = <0>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x20000000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0 0x100>;
+		};
+
+		twd@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x10>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+			always-on;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+	};
+
+	l2cc: cache-controller@20100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x20100000 0x1000>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&irq0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			clock-frequency = <27000000>;
+			#clock-cells = <0>;
+		};
+
+		clkgen: clkgen@10000 {
+			compatible = "sigma,tango4-clkgen";
+			reg = <0x10000 0x100>;
+			clocks = <&xtal>;
+			#clock-cells = <1>;
+		};
+
+		tick-counter@10048 {
+			compatible = "sigma,tick-counter";
+			reg = <0x10048 0x4>;
+			clocks = <&xtal>;
+		};
+
+		uart: serial@10700 {
+			compatible = "ralink,rt2880-uart", "ns16550a";
+			reg = <0x10700 0x30>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <7372800>;
+			reg-shift = <2>;
+		};
+
+		watchdog@1fd00 {
+			compatible = "sigma,smp8759-wdt";
+			reg = <0x1fd00 8>;
+			clocks = <&xtal>;
+		};
+
+		mmc0: mmc@21000 {
+			compatible = "arasan,sdhci-8.9a";
+			reg = <0x21000 0x200>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
+			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmc1: mmc@21200 {
+			compatible = "arasan,sdhci-8.9a";
+			reg = <0x21200 0x200>;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb0: usb@21400 {
+			compatible = "chipidea,usb2";
+			reg = <0x21400 0x200>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb0_phy>;
+			phy-names = "usb-phy";
+		};
+
+		usb0_phy: phy@21700 {
+			compatible = "sigma,smp8642-usb-phy";
+			reg = <0x21700 0x100>;
+			#phy-cells = <0>;
+			clocks = <&clkgen USB_CLK>;
+		};
+
+		usb1: usb@25400 {
+			compatible = "chipidea,usb2";
+			reg = <0x25400 0x200>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb1_phy>;
+			phy-names = "usb-phy";
+		};
+
+		usb1_phy: phy@25700 {
+			compatible = "sigma,smp8642-usb-phy";
+			reg = <0x25700 0x100>;
+			#phy-cells = <0>;
+			clocks = <&clkgen USB_CLK>;
+		};
+
+		eth0: ethernet@26000 {
+			compatible = "sigma,smp8734-ethernet";
+			reg = <0x26000 0x800>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkgen SYS_CLK>;
+		};
+
+		intc: interrupt-controller@6e000 {
+			compatible = "sigma,smp8642-intc";
+			reg = <0x6e000 0x400>;
+			ranges = <0 0x6e000 0x400>;
+			interrupt-parent = <&gic>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			irq0: irq0@0 {
+				reg = <0x000 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq1: irq1@100 {
+				reg = <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq2: irq2@300 {
+				reg = <0x300 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
new file mode 100644
index 000000000..1c6a5bf1a
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tango4-common.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "sigma,tango4-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkgen CPU_CLK>;
+			clock-latency = <1>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupts =
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		cpu_temp: thermal@920100 {
+			#thermal-sensor-cells = <0>;
+			compatible = "sigma,smp8758-thermal";
+			reg = <0x920100 12>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <997>;		/* milliseconds */
+			polling-delay-passive = <499>;	/* milliseconds */
+			thermal-sensors = <&cpu_temp>;
+			trips {
+				cpu_critical {
+					temperature = <120000>;
+					hysteresis = <2500>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
new file mode 100644
index 000000000..d237d7f02
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tango4-smp8758.dtsi"
+
+/ {
+	model = "Sigma Designs SMP8758 Vantage-1172 Rev E1";
+	compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4";
+
+	aliases {
+		serial = &uart;
+		eth0 = &eth0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>; /* 2 GB */
+	};
+
+	chosen {
+		stdout-path = "serial:115200n8";
+	};
+};
+
+&eth0 {
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&eth0_phy>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Atheros AR8035 */
+	eth0_phy: ethernet-phy@4 {
+		compatible = "ethernet-phy-id004d.d072",
+			     "ethernet-phy-ieee802.3-c22";
+		interrupts = <37 IRQ_TYPE_EDGE_RISING>;
+		reg = <4>;
+	};
+};
+
+&mmc1 {
+	non-removable; /* eMMC */
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
new file mode 100644
index 000000000..c04162dde
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -0,0 +1,1286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This dts file supports Dalmore A04.
+ * Other board revisions are not supported
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Tegra114 Dalmore evaluation board";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65913@58";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&vdd_hdmi_reg>;
+			pll-supply = <&palmas_smps3_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
+
+			panel@0 {
+				compatible = "panasonic,vvx10f004b00";
+				reg = <0>;
+
+				power-supply = <&avdd_lcd_reg>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_cs6_n_pi3",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1",
+						"dap3_sclk_pp3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0",
+						"gmi_cs0_n_pj0",
+						"gmi_cs2_n_pk3",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_iordy_pi5",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3",
+						"kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5",
+						"pu6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2",
+						"usb_vbus_en1_pn5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		battery: smart-battery@b {
+			compatible = "ti,bq20z45", "sbs,sbs-battery";
+			reg = <0xb>;
+			sbs,i2c-retry-count = <2>;
+			sbs,poll-retry-count = <100>;
+			power-supplies = <&charger>;
+		};
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tps51632@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		tps65090@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
+
+			vsys1-supply = <&vdd_ac_bat_reg>;
+			vsys2-supply = <&vdd_ac_bat_reg>;
+			vsys3-supply = <&vdd_ac_bat_reg>;
+			infet1-supply = <&vdd_ac_bat_reg>;
+			infet2-supply = <&vdd_ac_bat_reg>;
+			infet3-supply = <&tps65090_dcdc2_reg>;
+			infet4-supply = <&tps65090_dcdc2_reg>;
+			infet5-supply = <&tps65090_dcdc2_reg>;
+			infet6-supply = <&tps65090_dcdc2_reg>;
+			infet7-supply = <&tps65090_dcdc2_reg>;
+			vsys-l1-supply = <&vdd_ac_bat_reg>;
+			vsys-l2-supply = <&vdd_ac_bat_reg>;
+
+			charger: charger {
+				compatible = "ti,tps65090-charger";
+				ti,enable-low-current-chrg;
+			};
+
+			regulators {
+				tps65090_dcdc1_reg: dcdc1 {
+					regulator-name = "vdd-sys-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc2_reg: dcdc2 {
+					regulator-name = "vdd-sys-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc3_reg: dcdc3 {
+					regulator-name = "vdd-ao";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_bl_reg: fet1 {
+					regulator-name = "vdd-lcd-bl";
+				};
+
+				fet3 {
+					regulator-name = "vdd-modem-3v3";
+				};
+
+				avdd_lcd_reg: fet4 {
+					regulator-name = "avdd-lcd";
+				};
+
+				fet5 {
+					regulator-name = "vdd-lvds";
+				};
+
+				fet6 {
+					regulator-name = "vdd-sd-slot";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				fet7 {
+					regulator-name = "vdd-com-3v3";
+				};
+
+				ldo1 {
+					regulator-name = "vdd-sby-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd-sby-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas: tps65913@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+				smps1-in-supply = <&tps65090_dcdc3_reg>;
+				smps3-in-supply = <&tps65090_dcdc3_reg>;
+				smps4-in-supply = <&tps65090_dcdc2_reg>;
+				smps7-in-supply = <&tps65090_dcdc2_reg>;
+				smps8-in-supply = <&tps65090_dcdc2_reg>;
+				smps9-in-supply = <&tps65090_dcdc2_reg>;
+				ldo1-in-supply = <&tps65090_dcdc2_reg>;
+				ldo2-in-supply = <&tps65090_dcdc2_reg>;
+				ldo3-in-supply = <&palmas_smps3_reg>;
+				ldo4-in-supply = <&tps65090_dcdc2_reg>;
+				ldo5-in-supply = <&vdd_ac_bat_reg>;
+				ldo6-in-supply = <&tps65090_dcdc2_reg>;
+				ldo7-in-supply = <&tps65090_dcdc2_reg>;
+				ldo8-in-supply = <&tps65090_dcdc3_reg>;
+				ldo9-in-supply = <&palmas_smps9_reg>;
+				ldoln-in-supply = <&tps65090_dcdc1_reg>;
+				ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+				regulators {
+					smps12 {
+						regulator-name = "vddio-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps3_reg: smps3 {
+						regulator-name = "vddio-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps9_reg: smps9 {
+						regulator-name = "sdhci-vdd-sd-slot";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					ldo1 {
+						regulator-name = "avdd-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo2 {
+						regulator-name = "avdd-cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					avdd_1v2_reg: ldo3 {
+						regulator-name = "avdd-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					palmas_ldo6_reg: ldo6 {
+						regulator-name = "vdd-sensor-2v85";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-af-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <900000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					ldo9 {
+						regulator-name = "vddio-sdmmc-2";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "hvdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	mmc@78000600 {
+		bus-width = <8>;
+		status = "okay";
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vdd_ac_bat_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	dvdd_ts_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	usb3_vbus_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	vdd_hdmi_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_hdmi_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	vdd_cam_1v8_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam_1v8_reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&palmas_gpio 6 0>;
+	};
+
+	vdd_5v0_hdmi: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-dalmore",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Dalmore";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
new file mode 100644
index 000000000..07960171f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -0,0 +1,1108 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		/* SHIELD's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		/* SHIELD's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,lh500wx1-sd03";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	/* Usable on reworked devices only */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* External USB port (must be powered) */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Back";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	lcd_bl_en: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_bl_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_ts";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_com";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_sys>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
new file mode 100644
index 000000000..745d234b1
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/* FIXME: output of BQ24192 */
+	vs_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VS_SYS";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lcd_bl_en: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_BL";
+		regulator-min-microvolt = <16500000>;
+		regulator-max-microvolt = <16500000>;
+		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vs_sys>;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VD_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
new file mode 100644
index 000000000..fb99b3e97
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -0,0 +1,810 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra114-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra114-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra114";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra114-host1x";
+		reg = <0x50000000 0x00028000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x01000000>;
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra114-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+
+			iommus = <&mc TEGRA_SWGROUP_G2>;
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra114-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+
+			iommus = <&mc TEGRA_SWGROUP_NV>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra114-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra114-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra114-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+				 <&tegra_car TEGRA114_CLK_DSIALP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
+				 <&tegra_car TEGRA114_CLK_DSIBLP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra114-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra114-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra114-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 246>;
+		*/
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra114-pinmux";
+		reg = <0x70000868 0x148>, /* Pad control registers */
+		      <0x70003000 0x40c>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA114_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra114-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra114-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra114-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra114-mc";
+		reg = <0x70019000 0x1000>;
+		clocks = <&tegra_car TEGRA114_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra114-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>,
+		      <0x70081000 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA114_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 154>; /* adx */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "adx";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra114-mipi";
+		reg = <0x700e3000 0x100>;
+		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	mmc@78000000 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000200 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000400 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000600 {
+		compatible = "nvidia,tegra114-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
new file mode 100644
index 000000000..32401457a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -0,0 +1,1467 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ *
+ */
+
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000003
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000060
+					0x00000000 0x00000018
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000005 0x00000005
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x00000064
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000007 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 0x00000005
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x0000009a
+					0x00000000 0x00000026
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000007 0x0000000f
+					0x00000006 0x00000006
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x000000a0
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x0000000b 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 0x0000000a
+					0x00000000 0x00000001
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000134
+					0x00000000 0x0000004d
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000008 0x0000000f
+					0x0000000c 0x0000000c
+					0x00000004 0x00000005
+					0x00000004 0x00000000
+					0x00000000 0x00000005
+					0x00000005 0x0000013f
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000015 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 0x00000011
+					0x00000000 0x00000002
+					0x00000000 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000000
+					0x00000000 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000202
+					0x00000000 0x00000080
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x0000000f 0x0000000f
+					0x00000013 0x00000013
+					0x00000004 0x00000005
+					0x00000004 0x00000001
+					0x00000000 0x00000005
+					0x00000005 0x00000213
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000022 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 0x0000001a
+					0x00000000 0x00000003
+					0x00000001 0x00000004
+					0x0000000a 0x00000005
+					0x0000000b 0x00000001
+					0x00000001 0x00000003
+					0x00000003 0x00000000
+					0x00000006 0x00000006
+					0x00000006 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000004
+					0x0000000c 0x0000000d
+					0x0000000f 0x00000304
+					0x00000000 0x000000c1
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000018 0x0000000f
+					0x0000001c 0x0000001c
+					0x00000004 0x00000005
+					0x00000004 0x00000002
+					0x00000000 0x00000005
+					0x00000005 0x0000031c
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x000fc000 0x000fc000
+					0x000fc000 0x000fc000
+					0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000e0e 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000033 0x00000000
+					0x00000042 0x000e000e
+					0x00000000 0x00000003
+					0x0000f2f3 0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 0x00000035
+					0x00000000 0x00000006
+					0x00000002 0x00000005
+					0x0000000a 0x00000005
+					0x0000000b 0x00000002
+					0x00000002 0x00000003
+					0x00000003 0x00000000
+					0x00000005 0x00000005
+					0x00000006 0x00000002
+					0x00000000 0x00000004
+					0x00000006 0x00010000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000003
+					0x0000000d 0x0000000f
+					0x00000011 0x00000607
+					0x00000000 0x00000181
+					0x00000002 0x00000002
+					0x00000001 0x00000000
+					0x00000032 0x0000000f
+					0x00000038 0x00000038
+					0x00000004 0x00000005
+					0x00000004 0x00000006
+					0x00000000 0x00000005
+					0x00000005 0x00000638
+					0x00000000 0x00000000
+					0x00000000 0x106aa298
+					0x002c00a0 0x00008000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00080000 0x00080000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00008000 0x00000000
+					0x00000000 0x00008000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00090000 0x00090000
+					0x00090000 0x00090000
+					0x00009000 0x00009000
+					0x00009000 0x00009000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000707 0x81f1f108
+					0x07070004 0x0000003f
+					0x016eeeee 0x51451400
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000066 0x00000000
+					0x00000100 0x000e000e
+					0x00000000 0x00000003
+					0x0000d2b3 0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d 0x0000004d
+					0x00000000 0x00000009
+					0x00000003 0x00000004
+					0x00000008 0x00000002
+					0x00000009 0x00000003
+					0x00000003 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000002
+					0x00000007 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x0000000e 0x00000010
+					0x00000012 0x000008e4
+					0x00000000 0x00000239
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x0000004b 0x0000000e
+					0x00000052 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000008
+					0x00000000 0x00000005
+					0x00000005 0x00000924
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00098000 0x00098000
+					0x00000000 0x00098000
+					0x00098000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00050000 0x00050000
+					0x00050000 0x00050000
+					0x00005000 0x00005000
+					0x00005000 0x00005000
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x00000096 0x00000000
+					0x00000100 0x0173000e
+					0x00000000 0x00000003
+					0x000052a3 0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 0x00000066
+					0x00000000 0x0000000c
+					0x00000004 0x00000004
+					0x00000008 0x00000002
+					0x0000000a 0x00000004
+					0x00000004 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000005 0x00000002
+					0x00000000 0x00000001
+					0x00000008 0x00020000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000f 0x00000010
+					0x00000012 0x00000bd1
+					0x00000000 0x000002f4
+					0x00000001 0x00000008
+					0x00000001 0x00000000
+					0x00000063 0x0000000f
+					0x0000006c 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x0000000b
+					0x00000000 0x00000005
+					0x00000005 0x00000c11
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0x002c00a0 0x00008000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00030000 0x00030000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00070000 0x00070000
+					0x00000000 0x00070000
+					0x00070000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00038000 0x00038000
+					0x00038000 0x00038000
+					0x00003800 0x00003800
+					0x00003800 0x00003800
+					0x10000280 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc081
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0000003f
+					0x000000c6 0x00000000
+					0x00000100 0x015b000e
+					0x00000000 0x00000003
+					0x000052a3 0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 0x00000088
+					0x00000000 0x00000010
+					0x00000006 0x00000006
+					0x00000009 0x00000002
+					0x0000000d 0x00000006
+					0x00000006 0x00000002
+					0x00000002 0x00000000
+					0x00000003 0x00000003
+					0x00000006 0x00000002
+					0x00000000 0x00000001
+					0x00000009 0x00030000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000010 0x00000012
+					0x00000014 0x00000fd6
+					0x00000000 0x000003f5
+					0x00000002 0x0000000b
+					0x00000001 0x00000000
+					0x00000085 0x00000012
+					0x00000090 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000010
+					0x00000000 0x00000006
+					0x00000006 0x00001017
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe01200b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00054000 0x00054000
+					0x00000000 0x00054000
+					0x00054000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x0000000c 0x0000000c
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0139000e
+					0x00000000 0x00000003
+					0x000042a0 0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b 0x0000009b
+					0x00000000 0x00000013
+					0x00000007 0x00000007
+					0x0000000b 0x00000003
+					0x00000010 0x00000007
+					0x00000007 0x00000002
+					0x00000002 0x00000000
+					0x00000005 0x00000005
+					0x0000000a 0x00000002
+					0x00000000 0x00000003
+					0x0000000b 0x00070000
+					0x00000003 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000002
+					0x00000012 0x00000016
+					0x00000018 0x00001208
+					0x00000000 0x00000482
+					0x00000002 0x0000000d
+					0x00000001 0x00000000
+					0x00000097 0x00000015
+					0x000000a3 0x00000200
+					0x00000004 0x00000005
+					0x00000004 0x00000013
+					0x00000000 0x00000006
+					0x00000006 0x00001248
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00e00b1 0x00008000
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00048000 0x00048000
+					0x00000000 0x00048000
+					0x00048000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x0000000d 0x0000000d
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000505 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x51451420
+					0x00514514 0x00514514
+					0x51451400 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x0127000e
+					0x00000000 0x00000003
+					0x000040a0 0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 0x000000cd
+					0x00000000 0x00000019
+					0x0000000a 0x00000008
+					0x0000000d 0x00000004
+					0x00000013 0x0000000a
+					0x0000000a 0x00000004
+					0x00000002 0x00000000
+					0x00000006 0x00000006
+					0x0000000b 0x00000002
+					0x00000000 0x00000002
+					0x0000000d 0x00080000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000014 0x00000018
+					0x0000001a 0x000017e2
+					0x00000000 0x000005f8
+					0x00000003 0x00000011
+					0x00000001 0x00000000
+					0x000000c7 0x00000018
+					0x000000d7 0x00000200
+					0x00000005 0x00000006
+					0x00000005 0x00000019
+					0x00000000 0x00000008
+					0x00000008 0x00001822
+					0x00000000 0x00000000
+					0x00000000 0x104ab098
+					0xe00700b1 0x00008000
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x007fc008 0x007fc008
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00034000 0x00034000
+					0x00000000 0x00034000
+					0x00034000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x00000005 0x00000005
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x0000000a 0x0000000a
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x61861820
+					0x00514514 0x00514514
+					0x61861800 0x0606003f
+					0x00000000 0x00000000
+					0x00000100 0x00f7000e
+					0x00000000 0x00000004
+					0x00004080 0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b 0x000000f0
+					0x00000000 0x0000001e
+					0x0000000b 0x00000009
+					0x0000000f 0x00000005
+					0x00000016 0x0000000b
+					0x0000000b 0x00000004
+					0x00000002 0x00000000
+					0x00000007 0x00000007
+					0x0000000d 0x00000002
+					0x00000000 0x00000002
+					0x0000000f 0x000a0000
+					0x00000004 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000001
+					0x00000016 0x0000001a
+					0x0000001c 0x00001be7
+					0x00000000 0x000006f9
+					0x00000004 0x00000015
+					0x00000001 0x00000000
+					0x000000e7 0x0000001b
+					0x000000fb 0x00000200
+					0x00000006 0x00000007
+					0x00000006 0x0000001e
+					0x00000000 0x0000000a
+					0x0000000a 0x00001c28
+					0x00000000 0x00000000
+					0x00000000 0x104ab898
+					0xe00400b1 0x00008000
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x007f800a 0x007f800a
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x0002c000 0x0002c000
+					0x00000000 0x0002c000
+					0x0002c000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000000 0x00000000
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000004 0x00000004
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x00000008 0x00000008
+					0x100002a0 0x00000000
+					0x00111111 0x00000000
+					0x00000000 0x77ffc085
+					0x00000000 0x81f1f108
+					0x07070004 0x00000000
+					0x016eeeee 0x5d75d720
+					0x00514514 0x00514514
+					0x5d75d700 0x0606003f
+					0x00000000 0x00000000
+					0x00000128 0x00cd000e
+					0x00000000 0x00000004
+					0x00004080 0x800037ea
+					0x00000011
+				>;
+			};
+
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
new file mode 100644
index 000000000..28c29b681
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@1003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/*
+	 * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
+	 */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* I2C4 (DDC): unused */
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
new file mode 100644
index 000000000..f3afde410
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2016-2018 Toradex AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
+		     "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+		     "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@40";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@1003000 {
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
+	 * on carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/*
+	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
+	 * (e.g. display EDID)
+	 */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* SPI4: Apalis SPI2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <50000000>;
+	};
+
+	/* Apalis Serial ATA */
+	sata@70020000 {
+		status = "okay";
+		target-5v-supply = <&reg_5v0>;
+		target-12v-supply = <&reg_12v0>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		status = "okay";
+	};
+
+	/* Apalis MMC1 */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* Apalis SD1 */
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_SW";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
new file mode 100644
index 000000000..1e30fa405
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -0,0 +1,2072 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2016-2018 Toradex AG
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.2A
+ */
+/ {
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&reg_vdd_gpu>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-din-pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout-pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-sclk-pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-sclk-pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-din-pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-dout-pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-out-pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			usb-vbus-en0-pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb-vbus-en1-pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-rst-n-pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-clkreq-n-pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp-hpd-pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1-i2c-sda-pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam-i2c-sda-pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C4 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			ddc-sda-pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out-pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat3-py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat2-py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat1-py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat0-py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb-vbus-en2-pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1-dout-pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat1-pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-dir-py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-stp-py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-txd-pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1-rxd-pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-cts-n-pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-rts-n-pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-cts-n-pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3-rts-n-pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2-txd-pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3-txd-pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4-rxd-pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4-txd-pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs-pwm-px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs-clk-px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat1-paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat2-paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat3-paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat4-paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat5-paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat6-paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat7-paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd-pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi-data4-po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio-x4-aud-px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x5-aud-px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x6-aud-px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x7-aud-px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr-i2c-sda-pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row1-pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col7-pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row2-pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio-w3-aud-pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-din-pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-sclk-pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data7-po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data0-po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data2-po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data3-po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data6-po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-fs-pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-din-pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-dout-pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-sclk-pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col3-pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row3-pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row4-pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row6-pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row7-pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row8-ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row9-ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row12-ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row13-ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row14-ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row15-ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row16-pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row17-pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * PCB Version Indication: V1.2 and later have GPIO_PV0
+			 * wired to GND, was NC before
+			 */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x1-aud-px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x3-aud-px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-req-pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-req-pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+			 * driver enabled aka not tristated and input driver
+			 * enabled as well as it features some magic properties
+			 * even though the external loopback is disabled and the
+			 * internal loopback used as per
+			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+			 * bits being set to 0xfffd according to the TRM!
+			 */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ams,system-power-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio2-7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				reg_1v35_vddio_ddr: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				reg_1v05_vdd: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				reg_1v8_vddio: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_1v05_avdd: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temp-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-1 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-2 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-1 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-2 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-3 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-4 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						status = "okay";
+						nvidia,function = "sata";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-1 {
+				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+		};
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&reg_vdd_cpu>;
+		};
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&gpio {
+	/* I210 Gigabit Ethernet Controller Reset */
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET_N";
+	};
+
+	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+	reset-moci-ctrl {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RESET_MOCI_CTRL";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
new file mode 100644
index 000000000..608896f8d
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -0,0 +1,2064 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016-2019 Toradex AG
+ */
+
+#include "tegra124.dtsi"
+#include "tegra124-apalis-emc.dtsi"
+
+/*
+ * Toradex Apalis TK1 Module Device Tree
+ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
+ */
+/ {
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+
+		/* Apalis PCIe (additional lane Apalis type specific) */
+		pci@1,0 {
+			/* PCIE1_RX/TX and TS_DIFF1/2 */
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1";
+		};
+
+		/* I210 Gigabit Ethernet Controller (On-module) */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&reg_vdd_gpu>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-din-pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout-pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-sclk-pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAM1_MCLK */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-sclk-pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-din-pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2-dout-pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 { /* DAP1_RESET */
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-out-pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc-sda-pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-rst-n-pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex-l1-clkreq-n-pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp-hpd-pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_CEC */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1_HPD */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1-i2c-sda-pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam-i2c-sda-pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc1-cd-n-pv3 { /* CD# GPIO */
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out-pw5 { /* D5 GPIO */
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat3-py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat2-py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat1-py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-dat0-py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 { /* D4 GPIO */
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb-vbus-en2-pff1 { /* D7 GPIO */
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM */
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* PWM3 active on pu6 being Apalis BKL1_PWM as well */
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			dap1-dout-pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat1-pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cd-n-pv2 { /* CD# GPIO */
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-dir-py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-stp-py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			pb1 { /* DCD GPIO */
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk7 { /* RI GPIO */
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-txd-pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart1-rxd-pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-cts-n-pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart1-rts-n-pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-cts-n-pa1 { /* DSR GPIO */
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3-rts-n-pc0 { /* DTR GPIO */
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			uart2-txd-pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart3-txd-pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart4-rxd-pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart4-txd-pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			usb-vbus-en1-pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			usb-vbus-en0-pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* CORE_PWR_REQ */
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* CPU_PWR_REQ */
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DVFS */
+			dvfs-pwm-px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs-clk-px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat1-paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat2-paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat3-paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat4-paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat5-paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat6-paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat7-paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd-pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_DEV_OFF# */
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_RESET# */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN_WAKE# */
+			ulpi-data4-po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT1# */
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT2# */
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT3# */
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_INT4# */
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MCU_RESET */
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MCU SPI */
+			gpio-x4-aud-px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x5-aud-px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x6-aud-px6 { /* MCU_CS */
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x7-aud-px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio-w2-aud-pw2 { /* MCU_CSEZP */
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PMIC_CLK_32K */
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PMIC_CPU_OC_INT */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_I2C */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr-i2c-sda-pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWR_INT_N */
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* RESET_MOCI_CTRL */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT_N */
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_IN */
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row1-pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Configure level-shifter as output for HDA */
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_DIR_OUT */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col7-pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SHIFT_CTRL_OE */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row2-pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO_PI6 aka TMP451 ALERT#/THERM2# */
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_INT */
+			gpio-w3-aud-pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pc7 { /* NC */
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 { /* NC */
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 { /* NC */
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 { /* NC */
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg3 { /* NC */
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 { /* NC */
+				nvidia,pins = "pg4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 { /* NC */
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph5 { /* NC */
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 { /* NC */
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 { /* NC */
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 { /* NC */
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 { /* NC */
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 { /* NC */
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 { /* NC */
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi7 { /* NC */
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 { /* NC */
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 { /* NC */
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 { /* NC */
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 { /* NC */
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 { /* NC */
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-din-pn1 { /* NC */
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-sclk-pn3 { /* NC */
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data7-po0 { /* NC */
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data0-po1 { /* NC */
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 { /* NC */
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data2-po3 { /* NC */
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data3-po4 { /* NC */
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data6-po7 { /* NC */
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-fs-pp4 { /* NC */
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-din-pp5 { /* NC */
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-dout-pp6 { /* NC */
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4-sclk-pp7 { /* NC */
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col3-pq3 { /* NC */
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row3-pr3 { /* NC */
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row4-pr4 { /* NC */
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 { /* NC */
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row6-pr6 { /* NC */
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row7-pr7 { /* NC */
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row8-ps0 { /* NC */
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row9-ps1 { /* NC */
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row12-ps4 { /* NC */
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row13-ps5 { /* NC */
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row14-ps6 { /* NC */
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row15-ps7 { /* NC */
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row16-pt0 { /* NC */
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row17-pt1 { /* NC */
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 { /* NC */
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 { /* NC */
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 { /* NC */
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x1-aud-px1 { /* NC */
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio-x3-aud-px3 { /* NC */
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 { /* NC */
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 { /* NC */
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 { /* NC */
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3-req-pee1 { /* NC */
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-mclk1-req-pee2 { /* NC */
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output
+			 * driver enabled aka not tristated and input driver
+			 * enabled as well as it features some magic properties
+			 * even though the external loopback is disabled and the
+			 * internal loopback used as per
+			 * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
+			 * bits being set to 0xfffd according to the TRM!
+			 */
+			sdmmc3-clk-lb-out-pee4 { /* NC */
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <10000>;
+	};
+
+	/* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vddio>;
+			VDDIO-supply = <&reg_1v8_vddio>;
+			clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ams,system-power-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio2-7 {
+					pins = "gpio2", /* PWR_EN_+V3.3 */
+					       "gpio7"; /* +V1.6_LPO */
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&reg_module_3v3>;
+				vsup-sd3-supply = <&reg_module_3v3>;
+				vsup-sd4-supply = <&reg_module_3v3>;
+				vsup-sd5-supply = <&reg_module_3v3>;
+				vin-ldo0-supply = <&reg_1v35_vddio_ddr>;
+				vin-ldo1-6-supply = <&reg_module_3v3>;
+				vin-ldo2-5-7-supply = <&reg_1v8_vddio>;
+				vin-ldo3-4-supply = <&reg_module_3v3>;
+				vin-ldo9-10-supply = <&reg_module_3v3>;
+				vin-ldo11-supply = <&reg_module_3v3>;
+
+				reg_vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				reg_1v35_vddio_ddr: sd2 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name =
+						"+V1.35_VDDIO_DDR(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				reg_1v05_vdd: sd4 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				reg_1v8_vddio: sd5 {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				reg_1v05_avdd: ldo0 {
+					regulator-name = "+V1.05_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				vddio_sdmmc1: ldo1 {
+					regulator-name = "VDDIO_SDMMC1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2 {
+					regulator-name = "+V1.2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+V1.05_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				/* 1.8V for LVDS, 3.3V for eDP */
+				ldo4 {
+					regulator-name = "AVDD_LVDS0_PLL";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				/* LDO5 not used */
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				/* LDO7 not used */
+
+				ldo9 {
+					regulator-name = "+V3.3_ETH(ldo9)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo10 {
+					regulator-name = "+V3.3_ETH(ldo10)";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo11 {
+					regulator-name = "+V1.8_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+
+		/*
+		 * TMP451 temperature sensor
+		 * Note: THERM_N directly connected to AS3722 PMIC THERM
+		 */
+		temp-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			#thermal-sensor-cells = <1>;
+			vcc-supply = <&reg_module_3v3>;
+		};
+	};
+
+	/* SPI2: MCU SPI */
+	spi@7000d600 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set power_off bit in ResetControl register of AS3722 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	sata@70020000 {
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+		avdd-supply = <&reg_1v05_vdd>;
+		hvdd-supply = <&reg_module_3v3>;
+		vddio-supply = <&reg_1v05_vdd>;
+	};
+
+	usb@70090000 {
+		/* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
+		avddio-pex-supply = <&reg_1v05_vdd>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-usb-ss-pll-supply = <&reg_1v05_vdd>;
+		avdd-usb-supply = <&reg_module_3v3>;
+		dvddio-pex-supply = <&reg_1v05_vdd>;
+		hvdd-usb-ss-pll-e-supply = <&reg_module_3v3>;
+		hvdd-usb-ss-supply = <&reg_module_3v3>;
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&reg_1v8_vddio>;
+		avdd-pll-erefe-supply = <&reg_1v05_avdd>;
+		avdd-pex-pll-supply = <&reg_1v05_vdd>;
+		hvdd-pex-pll-e-supply = <&reg_module_3v3>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-1 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+
+					usb2-2 {
+						status = "okay";
+						nvidia,function = "xusb";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-1 {
+						status = "okay";
+						nvidia,function = "usb3-ss";
+					};
+
+					pcie-2 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-3 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+
+					pcie-4 {
+						status = "okay";
+						nvidia,function = "pcie";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						status = "okay";
+						nvidia,function = "sata";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* USBO1 */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+
+			/* USBH2 */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			/* USBH4 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <2>;
+				vbus-supply = <&reg_usbh_vbus>;
+			};
+
+			usb3-1 {
+				status = "okay";
+				nvidia,usb2-companion = <0>;
+				vbus-supply = <&reg_usbo1_vbus>;
+			};
+		};
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vddio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		nvidia,i2c-fs-rate = <400000>;
+		vdd-cpu-supply = <&reg_vdd_cpu>;
+	};
+
+	ahub@70300000 {
+		i2s@70301200 {
+			status = "okay";
+		};
+	};
+
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&reg_vdd_cpu>;
+		};
+	};
+
+	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.05_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_3v3_mxm: regulator-3v3-mxm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_MXM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_1v05_vdd>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		/* PWR_EN_+V3.3 */
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3_mxm>;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis TK1";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&gpio {
+	/* I210 Gigabit Ethernet Controller Reset */
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET_N";
+	};
+
+	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+	reset-moci-ctrl {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RESET_MOCI_CTRL";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
new file mode 100644
index 000000000..861d3f221
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -0,0 +1,2422 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	clock@60006000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000060
+					0x00000000
+					0x00000018
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000005
+					0x00000005
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000064
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000007
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000005
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x0000009a
+					0x00000000
+					0x00000026
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000006
+					0x00000006
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x000000a0
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x0000000b
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001
+					0x0000000a
+					0x00000000
+					0x00000001
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000134
+					0x00000000
+					0x0000004d
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000008
+					0x0000000f
+					0x0000000c
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000013f
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000015
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003
+					0x00000011
+					0x00000000
+					0x00000002
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000202
+					0x00000000
+					0x00000080
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x0000000f
+					0x0000000f
+					0x00000013
+					0x00000013
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000001
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000213
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000022
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004
+					0x0000001a
+					0x00000000
+					0x00000003
+					0x00000001
+					0x00000004
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000304
+					0x00000000
+					0x000000c1
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000018
+					0x0000000f
+					0x0000001c
+					0x0000001c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000031c
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000e0e
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000033
+					0x00000000
+					0x00000042
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008cd>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009
+					0x00000035
+					0x00000000
+					0x00000006
+					0x00000002
+					0x00000005
+					0x0000000a
+					0x00000005
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000004
+					0x00000006
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000003
+					0x0000000d
+					0x0000000f
+					0x00000011
+					0x00000607
+					0x00000000
+					0x00000181
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000032
+					0x0000000f
+					0x00000038
+					0x00000038
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000006
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000638
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00080000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00008000
+					0x00000000
+					0x00000000
+					0x00008000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000707
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000066
+					0x00000000
+					0x00000100
+					0x000e000e
+					0x00000000
+					0x00000003
+					0x0000d2b3
+					0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0173000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d
+					0x0000004d
+					0x00000000
+					0x00000009
+					0x00000003
+					0x00000004
+					0x00000008
+					0x00000002
+					0x00000009
+					0x00000003
+					0x00000003
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000007
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x0000000e
+					0x00000010
+					0x00000012
+					0x000008e4
+					0x00000000
+					0x00000239
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x0000004b
+					0x0000000e
+					0x00000052
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000008
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000924
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00098000
+					0x00098000
+					0x00000000
+					0x00098000
+					0x00098000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00050000
+					0x00050000
+					0x00050000
+					0x00050000
+					0x00005000
+					0x00005000
+					0x00005000
+					0x00005000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000096
+					0x00000000
+					0x00000100
+					0x0173000e
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011
+					0x00000066
+					0x00000000
+					0x0000000c
+					0x00000004
+					0x00000004
+					0x00000008
+					0x00000002
+					0x0000000a
+					0x00000004
+					0x00000004
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000008
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000f
+					0x00000010
+					0x00000012
+					0x00000bd1
+					0x00000000
+					0x000002f4
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x00000063
+					0x0000000f
+					0x0000006c
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x0000000b
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000c11
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00070000
+					0x00070000
+					0x00000000
+					0x00070000
+					0x00070000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00038000
+					0x00038000
+					0x00038000
+					0x00038000
+					0x00003800
+					0x00003800
+					0x00003800
+					0x00003800
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x000000c6
+					0x00000000
+					0x00000100
+					0x015b000e
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x0139000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018
+					0x00000088
+					0x00000000
+					0x00000010
+					0x00000006
+					0x00000006
+					0x00000009
+					0x00000002
+					0x0000000d
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000009
+					0x00030000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000010
+					0x00000012
+					0x00000014
+					0x00000fd6
+					0x00000000
+					0x000003f5
+					0x00000002
+					0x0000000b
+					0x00000001
+					0x00000000
+					0x00000085
+					0x00000012
+					0x00000090
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000010
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001017
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe01200b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00054000
+					0x00054000
+					0x00000000
+					0x00054000
+					0x00054000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x0000000c
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0139000e
+					0x00000000
+					0x00000003
+					0x000042a0
+					0x80002062
+					0x0000000a
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0127000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b
+					0x0000009b
+					0x00000000
+					0x00000013
+					0x00000007
+					0x00000007
+					0x0000000b
+					0x00000003
+					0x00000010
+					0x00000007
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x00000002
+					0x00000000
+					0x00000003
+					0x0000000b
+					0x00070000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000002
+					0x00000012
+					0x00000016
+					0x00000018
+					0x00001208
+					0x00000000
+					0x00000482
+					0x00000002
+					0x0000000d
+					0x00000001
+					0x00000000
+					0x00000097
+					0x00000015
+					0x000000a3
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000013
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001248
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00e00b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00048000
+					0x00048000
+					0x00000000
+					0x00048000
+					0x00048000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x0000000d
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0127000e
+					0x00000000
+					0x00000003
+					0x000040a0
+					0x800024aa
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f7000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024
+					0x000000cd
+					0x00000000
+					0x00000019
+					0x0000000a
+					0x00000008
+					0x0000000d
+					0x00000004
+					0x00000013
+					0x0000000a
+					0x0000000a
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000006
+					0x00000006
+					0x0000000b
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000d
+					0x00080000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000014
+					0x00000018
+					0x0000001a
+					0x000017e2
+					0x00000000
+					0x000005f8
+					0x00000003
+					0x00000011
+					0x00000001
+					0x00000000
+					0x000000c7
+					0x00000018
+					0x000000d7
+					0x00000200
+					0x00000005
+					0x00000006
+					0x00000005
+					0x00000019
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00001822
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00700b1
+					0x00008000
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x007fc008
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00034000
+					0x00034000
+					0x00000000
+					0x00034000
+					0x00034000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000000
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x61861820
+					0x00514514
+					0x00514514
+					0x61861800
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x00f7000e
+					0x00000000
+					0x00000004
+					0x00004080
+					0x80003012
+					0x0000000f
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430303>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200020>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000f15>;
+				nvidia,emc-mrs-wait-cnt = <0x00cd000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000002b
+					0x000000f0
+					0x00000000
+					0x0000001e
+					0x0000000b
+					0x00000009
+					0x0000000f
+					0x00000005
+					0x00000016
+					0x0000000b
+					0x0000000b
+					0x00000004
+					0x00000002
+					0x00000000
+					0x00000007
+					0x00000007
+					0x0000000d
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000f
+					0x000a0000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000016
+					0x0000001a
+					0x0000001c
+					0x00001be7
+					0x00000000
+					0x000006f9
+					0x00000004
+					0x00000015
+					0x00000001
+					0x00000000
+					0x000000e7
+					0x0000001b
+					0x000000fb
+					0x00000200
+					0x00000006
+					0x00000007
+					0x00000006
+					0x0000001e
+					0x00000000
+					0x0000000a
+					0x0000000a
+					0x00001c28
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab898
+					0xe00400b1
+					0x00008000
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x007f800a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000004
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000000
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x5d75d720
+					0x00514514
+					0x00514514
+					0x5d75d700
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000128
+					0x00cd000e
+					0x00000000
+					0x00000004
+					0x00004080
+					0x800037ea
+					0x00000011
+				>;
+			};
+
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0503
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000004
+					0x00000002
+					0x00000003
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0504
+					0x73840a05
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000006
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000007
+					0x00000008
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090c
+					0x7428180d
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000a
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000d
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00170e13
+					0x736c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d
+					0x80000040
+					0x00000005
+					0x00000006
+					0x00000016
+					0x0000000e
+					0x0000000f
+					0x00000002
+					0x00000004
+					0x0000000e
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000009
+					0x09060202
+					0x001a1016
+					0x734e2a17
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
new file mode 100644
index 000000000..414cd1caf
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -0,0 +1,2077 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+#include "tegra124-jetson-tk1-emc.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+
+		/* This order keeps the mapping DB9 connector <-> ttyS0 */
+		serial0 = &uartd;
+		serial1 = &uarta;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		/* Mini PCIe */
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+
+		/* Gigabit Ethernet */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	cec@70015000 {
+		status = "okay";
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dsi_b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
+		};
+	};
+
+	/*
+	 * First high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 41: BR_UART1_TXD
+	 *   Pin 44: BR_UART1_RXD
+	 */
+	serial@70006000 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	/*
+	 * Second high speed UART, exposed on the expansion connector J3A2
+	 *   Pin 65: UART2_RXD
+	 *   Pin 68: UART2_TXD
+	 *   Pin 71: UART2_CTS_L
+	 *   Pin 74: UART2_RTS_L
+	 */
+	serial@70006040 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	/* DB9 serial port */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c02";
+			reg = <0x56>;
+			pagesize = <8>;
+		};
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	/* Expansion TS_SPI_* */
+	spi@7000d400 {
+		status = "okay";
+	};
+
+	/* Internal SPI */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	/* Serial ATA */
+	sata@70020000 {
+		status = "okay";
+
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+		phy-names = "sata-0";
+
+		hvdd-supply = <&vdd_3v3_lp0>;
+		vddio-supply = <&vdd_1v05_run>;
+		avdd-supply = <&vdd_1v05_run>;
+
+		target-5v-supply = <&vdd_5v0_sata>;
+		target-12v-supply = <&vdd_12v0_sata>;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "snps";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* Micro A/B */
+			usb2-0 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* Mini PCIe */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* USB3 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* SD card */
+	mmc@700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	/* mini-PCIe USB */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+	};
+
+	/* USB A connector */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_usb1_vbus: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+USB0_VBUS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_lp0: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Molex power connector */
+	vdd_5v0_sata: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_12v0_sata: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+12V_SATA";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				cpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem {
+			trips {
+				mem-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu {
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
new file mode 100644
index 000000000..c91647d13
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -0,0 +1,6651 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	apbmisc@70000800 {
+		nvidia,long-ram-code;
+	};
+
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000003 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000005 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000006 /* EMC_TXSR */
+					0x00000006 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000c /* EMC_TXSR */
+					0x0000000c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000011 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000013 /* EMC_TXSR */
+					0x00000013 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000018 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000032 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x0000004c /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000004a /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000051 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0174000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000065 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000063 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006b /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x015b000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x013a000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x00000088 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000011 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000084 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x013a000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c /* EMC_RC */
+					0x0000009a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000096 /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000a2 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0128000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000cc /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000c6 /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d6 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000005 /* EMC_DLL_XFORM_DQS0 */
+					0x00000005 /* EMC_DLL_XFORM_DQS1 */
+					0x00000005 /* EMC_DLL_XFORM_DQS2 */
+					0x00000005 /* EMC_DLL_XFORM_DQS3 */
+					0x00000005 /* EMC_DLL_XFORM_DQS4 */
+					0x00000005 /* EMC_DLL_XFORM_DQS5 */
+					0x00000005 /* EMC_DLL_XFORM_DQS6 */
+					0x00000005 /* EMC_DLL_XFORM_DQS7 */
+					0x00000005 /* EMC_DLL_XFORM_DQS8 */
+					0x00000005 /* EMC_DLL_XFORM_DQS9 */
+					0x00000005 /* EMC_DLL_XFORM_DQS10 */
+					0x00000005 /* EMC_DLL_XFORM_DQS11 */
+					0x00000005 /* EMC_DLL_XFORM_DQS12 */
+					0x00000005 /* EMC_DLL_XFORM_DQS13 */
+					0x00000005 /* EMC_DLL_XFORM_DQS14 */
+					0x00000005 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x0000000a /* EMC_DLL_XFORM_DQ4 */
+					0x0000000a /* EMC_DLL_XFORM_DQ5 */
+					0x0000000a /* EMC_DLL_XFORM_DQ6 */
+					0x0000000a /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f8000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000e /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000f /* EMC_TXSR */
+					0x0000000f /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000017 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000015 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000019 /* EMC_TXSR */
+					0x00000019 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x00000023 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000021 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000025 /* EMC_TXSR */
+					0x00000025 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x00008000 /* EMC_DLL_XFORM_DQ4 */
+					0x00008000 /* EMC_DLL_XFORM_DQ5 */
+					0x00008000 /* EMC_DLL_XFORM_DQ6 */
+					0x00008000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100003>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000047 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000006 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000044 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000004a /* EMC_TXSR */
+					0x0000004a /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0117000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x00000067 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000065 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0117000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000521>;
+				nvidia,emc-mrs-wait-cnt = <0x00f5000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000011 /* EMC_RC */
+					0x00000089 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000087 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f5000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000941>;
+				nvidia,emc-mrs-wait-cnt = <0x00c8000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x000000b7 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000010 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000b4 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x000000bf /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00c8000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x00b0000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001b /* EMC_RC */
+					0x000000d0 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000cc /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00b0000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x00100002>;
+				nvidia,emc-mode-2 = <0x00200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x00000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x006f000e>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000024 /* EMC_RC */
+					0x00000114 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000019 /* EMC_RAS */
+					0x0000000a /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x0000000a /* EMC_RD_RCD */
+					0x0000000a /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000010d /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x0000011e /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x007fc007 /* EMC_DLL_XFORM_DQS0 */
+					0x007fc008 /* EMC_DLL_XFORM_DQS1 */
+					0x007f400c /* EMC_DLL_XFORM_DQS2 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS3 */
+					0x007f4006 /* EMC_DLL_XFORM_DQS4 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS5 */
+					0x007f8005 /* EMC_DLL_XFORM_DQS6 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS7 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS8 */
+					0x007fc008 /* EMC_DLL_XFORM_DQS9 */
+					0x007f400c /* EMC_DLL_XFORM_DQS10 */
+					0x007fc007 /* EMC_DLL_XFORM_DQS11 */
+					0x007f4006 /* EMC_DLL_XFORM_DQS12 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS13 */
+					0x007f8005 /* EMC_DLL_XFORM_DQS14 */
+					0x007f8004 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x00492492 /* EMC_XM2DQSPADCTRL4 */
+					0x00492492 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x006f000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000003 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000005 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x0000009a /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000026 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000006 /* EMC_TXSR */
+					0x00000006 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000a0 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x0000000b /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000023a /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x0000000a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000134 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000004d /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000c /* EMC_TXSR */
+					0x0000000c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000013f /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000015 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000370 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003 /* EMC_RC */
+					0x00000011 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000002 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000202 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000080 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000013 /* EMC_TXSR */
+					0x00000013 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000213 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000022 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x8000050e /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000304 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c1 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000018 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000033 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000004 /* EMC_EINPUT */
+					0x00000006 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000003 /* EMC_QRST */
+					0x0000000d /* EMC_QSAFE */
+					0x0000000f /* EMC_RDV */
+					0x00000011 /* EMC_RDV_MASK */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000032 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00004000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00090000 /* EMC_DLL_XFORM_DQ0 */
+					0x00090000 /* EMC_DLL_XFORM_DQ1 */
+					0x00094000 /* EMC_DLL_XFORM_DQ2 */
+					0x00094000 /* EMC_DLL_XFORM_DQ3 */
+					0x00009400 /* EMC_DLL_XFORM_DQ4 */
+					0x00009000 /* EMC_DLL_XFORM_DQ5 */
+					0x00009000 /* EMC_DLL_XFORM_DQ6 */
+					0x00009000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000303 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000066 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000d2b3 /* EMC_CFG_PIPE */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d /* EMC_RC */
+					0x0000004c /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000009 /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000007 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x0000000e /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x000008e4 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000239 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000004a /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000051 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000924 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00098000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00060000 /* EMC_DLL_XFORM_DQ0 */
+					0x00060000 /* EMC_DLL_XFORM_DQ1 */
+					0x00060000 /* EMC_DLL_XFORM_DQ2 */
+					0x00060000 /* EMC_DLL_XFORM_DQ3 */
+					0x00006000 /* EMC_DLL_XFORM_DQ4 */
+					0x00006000 /* EMC_DLL_XFORM_DQ5 */
+					0x00006000 /* EMC_DLL_XFORM_DQ6 */
+					0x00006000 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000096 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0174000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x800012d7 /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000065 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000005 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000001 /* EMC_EINPUT */
+					0x00000008 /* EMC_EINPUT_DURATION */
+					0x00020000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000000 /* EMC_QRST */
+					0x0000000f /* EMC_QSAFE */
+					0x00000010 /* EMC_RDV */
+					0x00000012 /* EMC_RDV_MASK */
+					0x00000bd1 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002f4 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000063 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006b /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x0000000d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c11 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00030000 /* EMC_DLL_XFORM_DQS0 */
+					0x00030000 /* EMC_DLL_XFORM_DQS1 */
+					0x00030000 /* EMC_DLL_XFORM_DQS2 */
+					0x00030000 /* EMC_DLL_XFORM_DQS3 */
+					0x00030000 /* EMC_DLL_XFORM_DQS4 */
+					0x00030000 /* EMC_DLL_XFORM_DQS5 */
+					0x00030000 /* EMC_DLL_XFORM_DQS6 */
+					0x00030000 /* EMC_DLL_XFORM_DQS7 */
+					0x00030000 /* EMC_DLL_XFORM_DQS8 */
+					0x00030000 /* EMC_DLL_XFORM_DQS9 */
+					0x00030000 /* EMC_DLL_XFORM_DQS10 */
+					0x00030000 /* EMC_DLL_XFORM_DQS11 */
+					0x00030000 /* EMC_DLL_XFORM_DQS12 */
+					0x00030000 /* EMC_DLL_XFORM_DQS13 */
+					0x00030000 /* EMC_DLL_XFORM_DQS14 */
+					0x00030000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00070000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x00004800 /* EMC_DLL_XFORM_DQ4 */
+					0x00004800 /* EMC_DLL_XFORM_DQ5 */
+					0x00004800 /* EMC_DLL_XFORM_DQ6 */
+					0x00004800 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x000000c6 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x015b000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000052a3 /* EMC_CFG_PIPE */
+					0x8000188b /* EMC_DYN_SELF_REF_CONTROL */
+					0x00000009 /* EMC_QPOP */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000941>;
+				nvidia,emc-mrs-wait-cnt = <0x013a000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123133d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000018 /* EMC_RC */
+					0x00000088 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000011 /* EMC_RAS */
+					0x00000006 /* EMC_RP */
+					0x00000006 /* EMC_R2W */
+					0x00000009 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000d /* EMC_W2P */
+					0x00000006 /* EMC_RD_RCD */
+					0x00000006 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000003 /* EMC_WDV */
+					0x00000003 /* EMC_WDV_MASK */
+					0x00000007 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x00000009 /* EMC_EINPUT_DURATION */
+					0x00040000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000010 /* EMC_QSAFE */
+					0x00000013 /* EMC_RDV */
+					0x00000015 /* EMC_RDV_MASK */
+					0x00000fd6 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000003f5 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000b /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000084 /* EMC_AR2PDEN */
+					0x00000012 /* EMC_RW2PDEN */
+					0x0000008f /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000013 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001017 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe01200b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00050000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000001 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x013a000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000042a0 /* EMC_CFG_PIPE */
+					0x80002062 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000b /* EMC_QPOP */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c /* EMC_RC */
+					0x0000009a /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000013 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000007 /* EMC_R2W */
+					0x0000000b /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000010 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_WDV_MASK */
+					0x0000000a /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000003 /* EMC_EINPUT */
+					0x0000000b /* EMC_EINPUT_DURATION */
+					0x00070000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000002 /* EMC_QRST */
+					0x00000012 /* EMC_QSAFE */
+					0x00000016 /* EMC_RDV */
+					0x00000018 /* EMC_RDV_MASK */
+					0x00001208 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000482 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000d /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000096 /* EMC_AR2PDEN */
+					0x00000015 /* EMC_RW2PDEN */
+					0x000000a2 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000006 /* EMC_TCLKSTOP */
+					0x00001249 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab098 /* EMC_FBIO_CFG5 */
+					0xe00e00b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQS8 */
+					0x0000000a /* EMC_DLL_XFORM_DQS9 */
+					0x0000000a /* EMC_DLL_XFORM_DQS10 */
+					0x0000000a /* EMC_DLL_XFORM_DQS11 */
+					0x0000000a /* EMC_DLL_XFORM_DQS12 */
+					0x0000000a /* EMC_DLL_XFORM_DQS13 */
+					0x0000000a /* EMC_DLL_XFORM_DQS14 */
+					0x0000000a /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00048000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000004 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000002 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000003 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000006 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451420 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0128000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x000040a0 /* EMC_CFG_PIPE */
+					0x800024aa /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000e /* EMC_QPOP */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0080089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200418>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000cc /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000008 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000002 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x0000000b /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000002 /* EMC_EINPUT */
+					0x0000000d /* EMC_EINPUT_DURATION */
+					0x00080000 /* EMC_PUTERM_EXTRA */
+					0x00000004 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000001 /* EMC_QRST */
+					0x00000014 /* EMC_QSAFE */
+					0x00000018 /* EMC_RDV */
+					0x0000001a /* EMC_RDV_MASK */
+					0x000017e2 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000005f8 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000011 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x000000c6 /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d6 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000006 /* EMC_TCKESR */
+					0x00000005 /* EMC_TPD */
+					0x0000001d /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000008 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001822 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x80000005 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x104ab198 /* EMC_FBIO_CFG5 */
+					0xe00700b1 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000009 /* EMC_DLL_XFORM_DQS0 */
+					0x00000009 /* EMC_DLL_XFORM_DQS1 */
+					0x00000009 /* EMC_DLL_XFORM_DQS2 */
+					0x00000007 /* EMC_DLL_XFORM_DQS3 */
+					0x00000006 /* EMC_DLL_XFORM_DQS4 */
+					0x00000006 /* EMC_DLL_XFORM_DQS5 */
+					0x007fc009 /* EMC_DLL_XFORM_DQS6 */
+					0x00000006 /* EMC_DLL_XFORM_DQS7 */
+					0x00000009 /* EMC_DLL_XFORM_DQS8 */
+					0x00000009 /* EMC_DLL_XFORM_DQS9 */
+					0x00000009 /* EMC_DLL_XFORM_DQS10 */
+					0x00000007 /* EMC_DLL_XFORM_DQS11 */
+					0x00000006 /* EMC_DLL_XFORM_DQS12 */
+					0x00000007 /* EMC_DLL_XFORM_DQS13 */
+					0x00000009 /* EMC_DLL_XFORM_DQS14 */
+					0x00000007 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR0 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR3 */
+					0x00034002 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000005 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000007 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000009 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000008 /* EMC_DLI_TRIM_TXDQS15 */
+					0x0000000e /* EMC_DLL_XFORM_DQ0 */
+					0x0000000e /* EMC_DLL_XFORM_DQ1 */
+					0x0000000e /* EMC_DLL_XFORM_DQ2 */
+					0x0000000e /* EMC_DLL_XFORM_DQ3 */
+					0x0000000e /* EMC_DLL_XFORM_DQ4 */
+					0x0000000e /* EMC_DLL_XFORM_DQ5 */
+					0x0000000e /* EMC_DLL_XFORM_DQ6 */
+					0x0000000e /* EMC_DLL_XFORM_DQ7 */
+					0x100002a0 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc085 /* EMC_XM2CLKPADCTRL */
+					0x00000101 /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x00000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x61861820 /* EMC_XM2DQSPADCTRL3 */
+					0x004d34d3 /* EMC_XM2DQSPADCTRL4 */
+					0x004d34d3 /* EMC_XM2DQSPADCTRL5 */
+					0x61861800 /* EMC_XM2DQSPADCTRL6 */
+					0x0606003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000000 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f8000c /* EMC_MRS_WAIT_CNT2 */
+					0x00000007 /* EMC_CTT */
+					0x00000004 /* EMC_CTT_DURATION */
+					0x00004080 /* EMC_CFG_PIPE */
+					0x80003012 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000f /* EMC_QPOP */
+				>;
+			};
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77430303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75430403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
+					0x7488180d /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x74691b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
+					0x746c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
new file mode 100644
index 000000000..fdc1d64df
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -0,0 +1,1347 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan.dtsi"
+
+#include "tegra124-nyan-big-emc.dtsi"
+
+/ {
+	model = "Acer Chromebook 13 CB5-311";
+	compatible = "google,nyan-big-rev7", "google,nyan-big-rev6",
+		     "google,nyan-big-rev5", "google,nyan-big-rev4",
+		     "google,nyan-big-rev3", "google,nyan-big-rev2",
+		     "google,nyan-big-rev1", "google,nyan-big-rev0",
+		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
+
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: common {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
new file mode 100644
index 000000000..d2beea0bd
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -0,0 +1,2050 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	clock@60006000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+			/* TODO: Add 528MHz frequency */
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000060
+					0x00000000
+					0x00000018
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000005
+					0x00000005
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000064
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000007
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x800001c5
+					0x0000000a
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000
+					0x00000005
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x0000009a
+					0x00000000
+					0x00000026
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000007
+					0x0000000f
+					0x00000006
+					0x00000006
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x000000a0
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x0000000b
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000023a
+					0x0000000a
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000001
+					0x0000000a
+					0x00000000
+					0x00000001
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000134
+					0x00000000
+					0x0000004d
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000008
+					0x0000000f
+					0x0000000c
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000013f
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000015
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000370
+					0x0000000a
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000003
+					0x00000011
+					0x00000000
+					0x00000002
+					0x00000000
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000000
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000202
+					0x00000000
+					0x00000080
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x0000000f
+					0x0000000f
+					0x00000013
+					0x00000013
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000001
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000213
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000022
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x8000050e
+					0x0000000a
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000004
+					0x0000001a
+					0x00000000
+					0x00000003
+					0x00000001
+					0x00000004
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x0000000c
+					0x0000000d
+					0x0000000f
+					0x00000304
+					0x00000000
+					0x000000c1
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000018
+					0x0000000f
+					0x0000001c
+					0x0000001c
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000031c
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x000fc000
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x0000fc00
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000033
+					0x00000000
+					0x00000042
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000f2f3
+					0x80000713
+					0x0000000a
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x0000088d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mrs-wait-cnt = <0x000c000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000009
+					0x00000035
+					0x00000000
+					0x00000007
+					0x00000002
+					0x00000005
+					0x0000000a
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000003
+					0x00000003
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000006
+					0x00000002
+					0x00000000
+					0x00000004
+					0x00000006
+					0x00010000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000003
+					0x0000000d
+					0x0000000f
+					0x00000011
+					0x00000607
+					0x00000000
+					0x00000181
+					0x00000002
+					0x00000002
+					0x00000001
+					0x00000000
+					0x00000032
+					0x0000000f
+					0x00000038
+					0x00000038
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000007
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000638
+					0x00000000
+					0x00000000
+					0x00000000
+					0x106aa298
+					0x002c00a0
+					0x00008000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00064000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x0000c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00090000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x00009000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000505
+					0x81f1f108
+					0x07070004
+					0x0000003f
+					0x016eeeee
+					0x51451400
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000066
+					0x00000000
+					0x00000100
+					0x000c000c
+					0x00000000
+					0x00000003
+					0x0000d2b3
+					0x80000d22
+					0x0000000a
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x000008d5>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-mrs-wait-cnt = <0x0174000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000000d
+					0x0000004c
+					0x00000000
+					0x00000009
+					0x00000003
+					0x00000004
+					0x00000008
+					0x00000002
+					0x00000009
+					0x00000003
+					0x00000003
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000007
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x0000000e
+					0x00000010
+					0x00000012
+					0x000008e4
+					0x00000000
+					0x00000239
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x0000004a
+					0x0000000e
+					0x00000051
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000009
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000924
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00000000
+					0x00090000
+					0x00090000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00060000
+					0x00060000
+					0x00060000
+					0x00060000
+					0x00006000
+					0x00006000
+					0x00006000
+					0x00006000
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x00000096
+					0x00000000
+					0x00000100
+					0x0174000c
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x800012d7
+					0x00000009
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73340000>;
+				nvidia,emc-cfg-2 = <0x00000895>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-mrs-wait-cnt = <0x015b000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231339>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000012
+					0x00000065
+					0x00000000
+					0x0000000c
+					0x00000004
+					0x00000005
+					0x00000008
+					0x00000002
+					0x0000000a
+					0x00000004
+					0x00000004
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000003
+					0x00000003
+					0x00000005
+					0x00000002
+					0x00000000
+					0x00000001
+					0x00000008
+					0x00020000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0000000f
+					0x00000010
+					0x00000012
+					0x00000bd1
+					0x00000000
+					0x000002f4
+					0x00000001
+					0x00000008
+					0x00000001
+					0x00000000
+					0x00000063
+					0x0000000f
+					0x0000006b
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x0000000d
+					0x00000000
+					0x00000005
+					0x00000005
+					0x00000c11
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0x002c00a0
+					0x00008000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00030000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00068000
+					0x00068000
+					0x00000000
+					0x00068000
+					0x00068000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00058000
+					0x00058000
+					0x00058000
+					0x00058000
+					0x00005800
+					0x00005800
+					0x00005800
+					0x00005800
+					0x10000280
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc081
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0000003f
+					0x000000c6
+					0x00000000
+					0x00000100
+					0x015b000c
+					0x00000000
+					0x00000003
+					0x000052a3
+					0x8000188b
+					0x00000009
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200010>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000b61>;
+				nvidia,emc-mrs-wait-cnt = <0x0128000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040008>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x0000001c
+					0x0000009a
+					0x00000000
+					0x00000013
+					0x00000007
+					0x00000007
+					0x0000000b
+					0x00000003
+					0x00000010
+					0x00000007
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000000
+					0x00000005
+					0x00000005
+					0x0000000a
+					0x00000002
+					0x00000000
+					0x00000003
+					0x0000000b
+					0x00070000
+					0x00000003
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000002
+					0x00000012
+					0x00000016
+					0x00000018
+					0x00001208
+					0x00000000
+					0x00000482
+					0x00000002
+					0x0000000d
+					0x00000001
+					0x00000000
+					0x00000096
+					0x00000015
+					0x000000a2
+					0x00000200
+					0x00000004
+					0x00000005
+					0x00000004
+					0x00000015
+					0x00000000
+					0x00000006
+					0x00000006
+					0x00001248
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00e00b1
+					0x00008000
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x0000000a
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00040000
+					0x00040000
+					0x00000000
+					0x00040000
+					0x00040000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000005
+					0x00000007
+					0x00000004
+					0x00000006
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000005
+					0x00000007
+					0x00000004
+					0x00000006
+					0x00000007
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x51451420
+					0x00514514
+					0x00514514
+					0x51451400
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x0128000c
+					0x00000000
+					0x00000003
+					0x000040a0
+					0x800024a9
+					0x0000000e
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0x73300000>;
+				nvidia,emc-cfg-2 = <0x0000089d>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-4 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-mrs-wait-cnt = <0x00f8000c>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040000>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120113d>;
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-zcal-interval = <0x00020000>;
+
+				nvidia,emc-configuration = <
+					0x00000025
+					0x000000cc
+					0x00000000
+					0x0000001a
+					0x00000009
+					0x00000008
+					0x0000000d
+					0x00000004
+					0x00000013
+					0x00000009
+					0x00000009
+					0x00000003
+					0x00000002
+					0x00000000
+					0x00000006
+					0x00000006
+					0x0000000b
+					0x00000002
+					0x00000000
+					0x00000002
+					0x0000000d
+					0x00080000
+					0x00000004
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000001
+					0x00000014
+					0x00000018
+					0x0000001a
+					0x000017e2
+					0x00000000
+					0x000005f8
+					0x00000003
+					0x00000011
+					0x00000001
+					0x00000000
+					0x000000c6
+					0x00000018
+					0x000000d6
+					0x00000200
+					0x00000005
+					0x00000006
+					0x00000005
+					0x0000001d
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00001822
+					0x00000000
+					0x00000000
+					0x00000000
+					0x104ab098
+					0xe00700b1
+					0x00008000
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000008
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x0002c000
+					0x0002c000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000000
+					0x00000008
+					0x00000008
+					0x00000005
+					0x00000008
+					0x0000000a
+					0x00000008
+					0x0000000a
+					0x0000000a
+					0x00000008
+					0x00000008
+					0x00000005
+					0x00000008
+					0x0000000a
+					0x00000008
+					0x0000000a
+					0x0000000a
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x0000000e
+					0x100002a0
+					0x00000000
+					0x00111111
+					0x00000000
+					0x00000000
+					0x77ffc085
+					0x00000202
+					0x81f1f108
+					0x07070004
+					0x00000000
+					0x016eeeee
+					0x61861820
+					0x00492492
+					0x00492492
+					0x61861800
+					0x0606003f
+					0x00000000
+					0x00000000
+					0x00000100
+					0x00f8000c
+					0x00000000
+					0x00000004
+					0x00004080
+					0x80003012
+					0x0000000f
+				>;
+			};
+
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0403
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000005
+					0x00000002
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0405
+					0x73840a06
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000005
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000007
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000d
+					0x00000008
+					0x0000000a
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090d
+					0x7428180e
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000b
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000f
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00160d13
+					0x734c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
new file mode 100644
index 000000000..abdf44568
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -0,0 +1,1345 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan.dtsi"
+
+#include "tegra124-nyan-blaze-emc.dtsi"
+
+/ {
+	model = "HP Chromebook 14";
+	compatible = "google,nyan-blaze-rev10", "google,nyan-blaze-rev9",
+		     "google,nyan-blaze-rev8", "google,nyan-blaze-rev7",
+		     "google,nyan-blaze-rev6", "google,nyan-blaze-rev5",
+		     "google,nyan-blaze-rev4", "google,nyan-blaze-rev3",
+		     "google,nyan-blaze-rev2", "google,nyan-blaze-rev1",
+		     "google,nyan-blaze-rev0", "google,nyan-blaze",
+		     "google,nyan", "nvidia,tegra124";
+
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBlaze";
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: common {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
new file mode 100644
index 000000000..5f71add38
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * Note that recent version of the device tree compiler (starting with
+	 * version 1.4.2) warn about this node containing a reg property, but
+	 * missing a unit-address. However, the bootloader on these Chromebook
+	 * devices relies on the full name of this node to be exactly /memory.
+	 * Adding the unit-address causes the bootloader to create a /memory
+	 * node and write the memory bank configuration to that node, which in
+	 * turn leads the kernel to believe that the device has 2 GiB of
+	 * memory instead of the amount detected by the bootloader.
+	 *
+	 * The name of this node is effectively ABI and must not be changed.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	/delete-node/ memory@80000000;
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	serial@70006000 {
+		/* Debug connector on the bottom of the board near SD card. */
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@15 {
+			compatible = "elan,ekth3000";
+			reg = <0x15>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							IRQ_TYPE_EDGE_BOTH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,external-control;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+					power-supplies = <&charger>;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			spi-max-frequency = <25000000>;
+			reg = <0>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				vbus-supply = <&vdd_usb1_vbus>;
+				status = "okay";
+				mode = "otg";
+			};
+
+			usb2-1 {
+				vbus-supply = <&vdd_run_cam>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb2-2 {
+				vbus-supply = <&vdd_usb3_vbus>;
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+		};
+	};
+
+	sdhci0_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	mmc@700b0000 { /* WiFi/BT on this bus */
+		status = "okay";
+		bus-width = <4>;
+		no-1-8-v;
+		non-removable;
+		mmc-pwrseq = <&sdhci0_pwrseq>;
+		vmmc-supply = <&vdd_3v3_lp0>;
+		vqmmc-supply = <&vddio_1v8>;
+		keep-power-in-suspend;
+	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		no-1-8-v;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	mmc@700b0600 { /* eMMC on this bus */
+		status = "okay";
+		bus-width = <8>;
+		no-1-8-v;
+		non-removable;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "disabled";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		default-brightness-level = <224>;
+		brightness-levels =
+			<  0   1   2   3   4   5   6   7
+			   8   9  10  11  12  13  14  15
+			  16  17  18  19  20  21  22  23
+			  24  25  26  27  28  29  30  31
+			  32  33  34  35  36  37  38  39
+			  40  41  42  43  44  45  46  47
+			  48  49  50  51  52  53  54  55
+			  56  57  58  59  60  61  62  63
+			  64  65  66  67  68  69  70  71
+			  72  73  74  75  76  77  78  79
+			  80  81  82  83  84  85  86  87
+			  88  89  90  91  92  93  94  95
+			  96  97  98  99 100 101 102 103
+			 104 105 106 107 108 109 110 111
+			 112 113 114 115 116 117 118 119
+			 120 121 122 123 124 125 126 127
+			 128 129 130 131 132 133 134 135
+			 136 137 138 139 140 141 142 143
+			 144 145 146 147 148 149 150 151
+			 152 153 154 155 156 157 158 159
+			 160 161 162 163 164 165 166 167
+			 168 169 170 171 172 173 174 175
+			 176 177 178 179 180 181 182 183
+			 184 185 186 187 188 189 190 191
+			 192 193 194 195 196 197 198 199
+			 200 201 202 203 204 205 206 207
+			 208 209 210 211 212 213 214 215
+			 216 217 218 219 220 221 222 223
+			 224 225 226 227 228 229 230 231
+			 232 233 234 235 236 237 238 239
+			 240 241 242 243 244 245 246 247
+			 248 249 250 251 252 253 254 255
+			 256>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <KEY_RESERVED>;
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+	};
+
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_5v0_ts: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_3v3_lp0: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"DMICL", "Int Mic",
+			"DMICR", "Int Mic",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,mic-det-gpios =
+				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
new file mode 100644
index 000000000..84e2d2406
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -0,0 +1,1254 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_1v05_run>;
+			vdd-hdmi-dp-pll-supply = <&vdd_3v3_run>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
+		};
+	};
+
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux: pinmux@70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&pinmux_boot>;
+
+		pinmux_boot: common {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7",
+					      "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0",
+					      "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <32>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <1>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			als_irq_l {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_l {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@4b {
+			compatible = "atmel,maxtouch";
+			reg = <0x4b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+			linux,gpio-keymap = <0 0 0 BTN_LEFT>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <4000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							IRQ_TYPE_EDGE_BOTH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <1>;
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	mmc@700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	ahub@70300000 {
+		i2s@70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_5v0_ts: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_3v3_lp0: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-venice2",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "NVIDIA Tegra Venice2";
+
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA124_CLK_EXTERN1>;
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
new file mode 100644
index 000000000..64f488ba1
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -0,0 +1,1324 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra124-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi: hdmi@54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		vic@54340000 {
+			compatible = "nvidia,tegra124-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_VIC03>;
+			clock-names = "vic";
+			resets = <&tegra_car 178>;
+			reset-names = "vic";
+
+			iommus = <&mc TEGRA_SWGROUP_VIC>;
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x1000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	/*
+	 * Please keep the following 0, notation in place as a former mainline
+	 * U-Boot version was looking for that particular notation in order to
+	 * perform required fix-ups on that GPU node.
+	 */
+	gpu@0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 251>;
+		*/
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra124-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
+		reset-names = "sata", "sata-oob", "sata-cold";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+			 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			ulpi-0 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	cec@70015000 {
+		compatible = "nvidia,tegra124-cec";
+		reg = <0x0 0x70015000 0x0 0x00001000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+		hdmi-phandle = <&hdmi>;
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
+	ahub@70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
new file mode 100644
index 000000000..ce87e1ec1
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -0,0 +1,1429 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Acer Iconia Tab A500";
+	compatible = "acer,picasso", "nvidia,tegra20";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Docking station */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_5v0_sys>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lsc1", "lsck", "lsda", "lspi", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "csus", "dap1",
+					"dap4", "dte", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm",
+					"sdc", "sdd", "slxc", "slxd", "slxk",
+					"spdi", "spdo", "uac", "uad", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3",
+					"gmd", "owc", "spia", "spib", "spic",
+					"spid", "spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spig",
+					"spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "kbcb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa",
+					"uab", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			drive_ddc {
+				nvidia,pins = "drive_ddc",
+						"drive_vi1",
+						"drive_sdio1";
+				nvidia,pull-up-strength = <31>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+			drive_dbg {
+				nvidia,pins = "drive_dbg",
+						"drive_vi2",
+						"drive_at1",
+						"drive_ao1";
+				nvidia,pull-up-strength = <31>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		status = "okay";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		status = "okay";
+
+		/* Azurewave AW-NH665 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&rtc_32k_wifi>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/* Docking station */
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			gpio-cfg = <
+				0x0000 /* MIC_LR_OUT#    GPIO, output, low */
+				0x0000 /* FM2018-enable  GPIO, output, low */
+				0x0000 /* Speaker-enable GPIO, output, low */
+				0x0200 /* Interrupt, output */
+				0x01a0 /* BCLK, input, active high */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		touchscreen@4c {
+			compatible = "atmel,maxtouch";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+					mount-matrix =	 "0",  "1",  "0",
+							 "1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <10000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		magnetometer@c {
+			compatible = "ak,ak8975";
+			reg = <0x0c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vid-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	"1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0", "-1";
+		};
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply       = <&vdd_5v0_sys>;
+			vin-sm0-supply   = <&sys_reg>;
+			vin-sm1-supply   = <&sys_reg>;
+			vin-sm2-supply   = <&sys_reg>;
+			vinldo01-supply  = <&sm2_reg>;
+			vinldo23-supply  = <&sm2_reg>;
+			vinldo4-supply   = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply   = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				avdd_vdac_reg: ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		nct1008-local {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+		};
+
+		nct1008-remote {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0>; /* elpida-8gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd510 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e1510 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <1>; /* elpida-4gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@2 {
+			nvidia,ram-code = <2>; /* hynix-8gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e2010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@3 {
+			nvidia,ram-code = <3>; /* hynix-4gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00078000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
new file mode 100644
index 000000000..a05fb3853
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+		     "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartd;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-a-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-c-d {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-a {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			usbh-pen {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
+	/* SD/MMC */
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	clk16m: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
new file mode 100644
index 000000000..425494b9e
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 on Iris";
+	compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+		     "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@34";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartd;
+		serial2 = &uartb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			bl-on {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-detect {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			lm1 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			mmccd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-a-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm-c-d {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			ssp {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-a {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-b {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart-c {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			usbh-pen {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c400 {
+		status = "okay";
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SD/MMC */
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
new file mode 100644
index 000000000..6162d193e
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra20.dtsi"
+
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
+/ {
+	memory@0 {
+		/*
+		 * Set memory to 256 MB to be safe as this could be used on
+		 * 256 or 512 MB module. It is expected from bootloader
+		 * to fix this up for 512 MB version.
+		 */
+		reg = <0x00000000 0x10000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio AC97 to WM9712 (On-module) */
+			audio-refclk {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+			 * (All on-module), SODIMM Pin 45 Wakeup
+			 */
+			gpio-uac {
+				nvidia,pins = "uac";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Buffer Enables for nPWE and RDnWR (On-module,
+			 * see GPIO hogging further down below)
+			 */
+			gpio-pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+			 * SYS_CLK_REQ (All on-module)
+			 */
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Colibri Address/Data Bus (GMI)
+			 * Note: spid and spie optionally used for SPI1
+			 */
+			gmi {
+				nvidia,pins = "atc", "atd", "ate", "dap1",
+					      "dap2", "dap4", "gmd", "gpu",
+					      "irrx", "irtx", "spia", "spib",
+					      "spic", "spid", "spie", "uca",
+					      "ucb";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			gmi-gpio1 {
+				nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-gpio2 {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+				nvidia,function = "rsvd4";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri BL_ON */
+			bl-on {
+				nvidia,pins = "dta";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri Backlight PWM<A>, PWM<B> */
+			pwm-a-b {
+				nvidia,pins = "sdc";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri DDC */
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri EXT_IO*
+			 * Note: dtf optionally used for I2C3
+			 */
+			ext-io {
+				nvidia,pins = "dtf", "spdi";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri Ethernet (On-module)
+			 * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+			 */
+			ulpi {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-refclk {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hotplug-detect {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			i2c {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * today's display need DE, disable LCD_M1
+			 */
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+					      "ld4", "ld5", "ld6", "ld7",
+					      "ld8", "ld9", "ld10", "ld11",
+					      "ld12", "ld13", "ld14", "ld15",
+					      "ld16", "ld17", "lhs", "lsc0",
+					      "lspi", "lvs";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			/* Colibri LCD (Optional 24 BPP Support) */
+			lcd-24 {
+				nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+					      "lpp", "lvp1";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			mmc {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMCCD */
+			mmccd {
+				nvidia,pins = "gmb";
+				nvidia,function = "gmi_int";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC (Optional 8-bit) */
+			mmc-8bit {
+				nvidia,pins = "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 * Note: dta used for BL_ON by default
+			 */
+			cif-mclk {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			cif {
+				nvidia,pins = "dtb", "dtc", "dtd";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri PWM<C>, PWM<D> */
+			pwm-c-d {
+				nvidia,pins = "sdb", "sdd";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri SSP */
+			ssp {
+				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-A */
+			uart-a {
+				nvidia,pins = "sdio1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uart-a-dsr {
+				nvidia,pins = "lpw1";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uart-a-dcd {
+				nvidia,pins = "lpw2";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-B */
+			uart-b {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART-C */
+			uart-c {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USB_CDET */
+			usb-cdet {
+				nvidia,pins = "spdo";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			usbh-oc {
+				nvidia,pins = "spih";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			usbh-pen {
+				nvidia,pins = "spig";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported */
+			vga {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C3 (Optional) */
+			i2c3 {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* JTAG_RTCK */
+			jtag-rtck {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+			 * (All On-module)
+			 */
+			gpio-gpv {
+				nvidia,pins = "gpv";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+			 * (All On-module); Colibri CAN_INT
+			 */
+			gpio-dte {
+				nvidia,pins = "dte";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NAND (On-module) */
+			nand {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					      "kbce", "kbcf";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Onewire (Optional) */
+			owr {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* RESET_OUT */
+			reset-out {
+				nvidia,pins = "ata";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * SPI1 (Optional)
+			 * Note: spid and spie used for Colibri Address/Data
+			 *       Bus (GMI)
+			 */
+			spi1 {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT# (On-module), unlatched I2C address pin
+			 * of LM95245 temperature sensor therefore requires
+			 * disabling for now
+			 */
+			lvp0 {
+				nvidia,pins = "lvp0";
+				nvidia,function = "rsvd3";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	tegra_ac97: ac97@70002000 {
+		status = "okay";
+		nvidia,codec-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,codec-sync-gpio =
+			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra20-hsuart";
+	};
+
+	nand-controller@70008000 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nand-bus-width = <8>;
+			nand-on-flash-bbt;
+			nand-ecc-algo = "bch";
+			nand-is-boot-medium;
+			nand-ecc-maximize;
+			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
+	hdmi_ddc: i2c@7000c400 {
+		clock-frequency = <10000>;
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */
+
+	/* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,system-power-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			sys-supply = <&reg_module_3v3>;
+			vin-sm0-supply = <&reg_3v3_vsys>;
+			vin-sm1-supply = <&reg_3v3_vsys>;
+			vin-sm2-supply = <&reg_3v3_vsys>;
+			vinldo01-supply = <&reg_1v8_vdd_ddr2>;
+			vinldo23-supply = <&reg_module_3v3>;
+			vinldo4-supply = <&reg_module_3v3>;
+			vinldo678-supply = <&reg_module_3v3>;
+			vinldo9-supply = <&reg_module_3v3>;
+
+			regulators {
+				reg_3v3_vsys: sys {
+					regulator-name = "VSYS_3.3V";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "VDD_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "VDD_CPU_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vdd_ddr2: sm2 {
+					regulator-name = "VDD_DDR2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				/*
+				 * +3.3V_ENABLE_N switching via FET:
+				 * AVDD_AUDIO_S and +3.3V
+				 * see also +3.3V fixed supply
+				 */
+				ldo1 {
+					regulator-name = "AVDD_PLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "VDD_RTC_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4 {
+					regulator-name = "VDDIO_SYS_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* Switched via FET from regular +3.3V */
+				ldo5 {
+					regulator-name = "+3.3V_USB";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "AVDD_VDAC_2.85V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				reg_3v3_avdd_hdmi: ldo7 {
+					regulator-name = "AVDD_HDMI_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				reg_1v8_avdd_hdmi_pll: ldo8 {
+					regulator-name = "AVDD_HDMI_PLL_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "VDDIO_RX_DDR_2.85V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "VCC_BATT";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* LM95245 temperature sensor */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <3>;
+			nvidia,bus-addr = <0x34>;
+			nvidia,reg-addr = <0x14>;
+			nvidia,reg-data = <0x8>;
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-table@83250 {
+			reg = <83250>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <83250>;
+			nvidia,emc-registers =   <0x00000005 0x00000011
+				0x00000004 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000001 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000025f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000005 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00520006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@133200 {
+			reg = <133200>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <133200>;
+			nvidia,emc-registers =   <0x00000008 0x00000019
+				0x00000006 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000039f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000007 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00510006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@166500 {
+			reg = <166500>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <166500>;
+			nvidia,emc-registers =   <0x0000000a 0x00000021
+				0x00000008 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000a 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000004df
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x00000009 0x000000c8
+				0x00000003 0x00000009 0x00000004 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x004f0006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@333000 {
+			reg = <333000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <333000>;
+			nvidia,emc-registers =   <0x00000014 0x00000041
+				0x0000000f 0x00000005 0x00000004 0x00000005
+				0x00000003 0x0000000a 0x00000005 0x00000005
+				0x00000004 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000009ff
+				0x00000000 0x00000003 0x00000003 0x00000005
+				0x00000005 0x00000001 0x0000000e 0x000000c8
+				0x00000003 0x00000011 0x00000006 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00380006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	/* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
+	usb@c5004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		asix@1 {
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio =
+			<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+		vbus-supply = <&reg_lan_v_bus>;
+	};
+
+	clk32k_in: xtal3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+			     "nvidia,tegra-audio-wm9712";
+		nvidia,model = "Toradex Colibri T20";
+		nvidia,audio-routing =
+			"Headphone", "HPOUTL",
+			"Headphone", "HPOUTR",
+			"LineIn", "LINEINL",
+			"LineIn", "LINEINR",
+			"Mic", "MIC1";
+		nvidia,ac97-controller = <&tegra_ac97>;
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
+
+&gpio {
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET#";
+	};
+
+	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+	npwe {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "Tri-state nPWE";
+	};
+
+	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+	rdnwr {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "Not tri-state RDnWR";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
new file mode 100644
index 000000000..6f3e8c5fc
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: cpu_opp_table0 {
+		opp@216000000,750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp@216000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@312000000,750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp@312000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@456000000,750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp@456000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@456000000,825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp@608000000,750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp@608000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@608000000,825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp@608000000,850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp@608000000,900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp@760000000,775 {
+			opp-microvolt = <775000 775000 1125000>;
+		};
+
+		opp@760000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@760000000,850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp@760000000,875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp@760000000,900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp@760000000,975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp@816000000,800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp@816000000,850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp@816000000,875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp@816000000,950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp@816000000,1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp@912000000,850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp@912000000,900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp@912000000,925 {
+			opp-microvolt = <925000 925000 1125000>;
+		};
+
+		opp@912000000,950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp@912000000,1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp@912000000,1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp@1000000000,875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp@1000000000,900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp@1000000000,950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp@1000000000,975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp@1000000000,1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp@1000000000,1025 {
+			opp-microvolt = <1025000 1025000 1125000>;
+		};
+
+		opp@1000000000,1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp@1200000000,1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp@1200000000,1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp@1200000000,1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp@1200000000,1125 {
+			opp-microvolt = <1125000 1125000 1125000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
new file mode 100644
index 000000000..702a635e8
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: cpu_opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@216000000,750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0003>;
+			opp-hz = /bits/ 64 <216000000>;
+		};
+
+		opp@216000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0004>;
+			opp-hz = /bits/ 64 <216000000>;
+		};
+
+		opp@312000000,750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0003>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp@312000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0F 0x0004>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp@456000000,750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x0C 0x0003>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp@456000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>, <0x04 0x0004>,
+					   <0x08 0x0004>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp@456000000,825 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp@608000000,750 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0003>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@608000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0006>, <0x08 0x0004>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@608000000,825 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@608000000,850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@608000000,900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@760000000,775 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0003>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0004>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0006>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>, <0x02 0x0002>,
+					   <0x01 0x0004>, <0x02 0x0004>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,975 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@816000000,800 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@816000000,850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@816000000,875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0005>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@816000000,950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0006>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@816000000,1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@912000000,850 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@912000000,900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@912000000,925 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@912000000,950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>,
+					   <0x04 0x0004>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@912000000,1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@912000000,1050 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <912000000>;
+		};
+
+		opp@1000000000,875 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0007>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,900 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0002>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,950 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0004>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,975 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,1025 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0002>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,1100 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1200000000,1000 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x08 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1050 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x04 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1100 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x02 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1125 {
+			clock-latency-ns = <400000>;
+			opp-supported-hw = <0x01 0x0004>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
new file mode 100644
index 000000000..ae4312eed
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <2>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+				MATRIX_KEY(0x01, 0x07, KEY_MENU)
+				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <8>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b101aw03";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	pci_vdd_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_pnl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_5v0_hdmi: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-harmony",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Harmony";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 000000000..b31c9bca1
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n156bge-l21";
+
+		power-supply =  <&vdd_1v8_reg>; // <&vdd_3v3_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
new file mode 100644
index 000000000..ada2bed8b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	nvec@7000c500 {
+		compatible = "nvidia,nvec";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		slave-addr = <138>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				core_vdd_reg: sm0 {
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1225000>;
+					regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>;
+					regulator-coupled-max-spread = <170000 450000>;
+					regulator-always-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				cpu_vdd_reg: sm1 {
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>;
+					regulator-coupled-max-spread = <450000 450000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd_reg: ldo2 {
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1225000>;
+					regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>;
+					regulator-coupled-max-spread = <170000 450000>;
+					regulator-always-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "Wakeup";
+			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "wifi-led";
+			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
+
+	panel: panel {
+		compatible = "samsung,ltn101nt05";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	p5valw_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5valw";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3VS,vdd_pnl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
new file mode 100644
index 000000000..5811b7006
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux board";
+	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-plutux",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Plutux";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
new file mode 100644
index 000000000..92d494b8c
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
+					"lsck", "lsda";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxd", "slxk", "spdi", "spdo", "uac",
+					"uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3",
+					"gpv", "owc", "slxc", "spib", "spid",
+					"spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spia",
+					"spig", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "spic", "uaa",
+					"uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gyrometer@68 {
+			compatible = "invn,mpu3050";
+			reg = <0x68>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0xc>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <32>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,ghost-filter;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+
+				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
+				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
+
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+
+				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
+
+				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
+
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+
+				/* Software Handled Function Keys */
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
+
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+
+				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	memory-controller@7000f400 {
+		emc-table@190000 {
+			reg = <190000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <190000>;
+			nvidia,emc-registers = <0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+
+		emc-table@380000 {
+			reg = <380000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <380000>;
+			nvidia,emc-registers = <0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	mmc@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_wup1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_hdmi: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
new file mode 100644
index 000000000..7f14f0d00
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc", "uad", "uca";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			/* vdd_5v0_reg must be provided by the base board */
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie@80003000 {
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000600 {
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	pci_vdd_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 0>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
new file mode 100644
index 000000000..10ff09d86
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-tec",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design TEC";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
new file mode 100644
index 000000000..4bc87bc0c
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c500/rtc@56";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc", "gmb";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gme", "pta";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc", "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "uarta";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "sdio3";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "spdif";
+			};
+			spia {
+				nvidia,pins = "spia", "spib", "spic";
+				nvidia,function = "spi2";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"crtp", "dap2", "dap3", "dap4", "dta",
+					"dtb", "dtc", "dtd", "dte", "gmb",
+					"gme", "i2cp", "pta", "slxc", "slxd",
+					"spdi", "spdo", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_atb {
+				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+					"gma", "gmc", "gmd", "gpu", "gpu7",
+					"gpv", "sdio1", "slxa", "slxk", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib",
+					"spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "pmc";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
+					"kbcc", "kbcd", "kbce", "kbcf", "owc",
+					"spic", "spie", "spig", "spih", "uaa",
+					"uab", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	dvi_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <48000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q80bl", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <48000000>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		codec: codec@1a {
+			compatible = "ti,tlv320aic23";
+			reg = <0x1a>;
+		};
+
+		rtc@56 {
+			compatible = "emmicro,em3027";
+			reg = <0x56>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		broken-cd;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi_vdd_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_pll_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi_pll";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vbus_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pci_clk_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_clk";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pci_vdd_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_vdd";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-trimslice";
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
new file mode 100644
index 000000000..fe400fb84
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxc", "slxd", "slxk", "spdi", "spdo",
+					"uac", "uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "gmd",
+					"gpv", "owc", "spia", "spib", "spic",
+					"spid", "spie", "spig";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	mmc@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_pnl_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_bl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-ventana",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Ventana";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
new file mode 100644
index 000000000..72a4211a6
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra20-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra20";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra20-host1x";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		interrupt-parent = <&intc>;
+		reg = <0x50040600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA20_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra20-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra20-timer";
+		reg = <0x60005000 0x60>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra20-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1200>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb@6000c000 {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra20-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 224>;
+		*/
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra20-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x300>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA20_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000014 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10>, /* Tri-state registers */
+		      <0x70000080 0x20>, /* Mux registers */
+		      <0x700000a0 0x14>, /* Pull-up/down registers */
+		      <0x70000868 0xa8>; /* Pad control registers */
+	};
+
+	das@70000c00 {
+		compatible = "nvidia,tegra20-das";
+		reg = <0x70000c00 0x80>;
+	};
+
+	tegra_ac97: ac97@70002000 {
+		compatible = "nvidia,tegra20-ac97";
+		reg = <0x70002000 0x200>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_AC97>;
+		resets = <&tegra_car 3>;
+		reset-names = "ac97";
+		dmas = <&apbdma 12>, <&apbdma 12>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002800 0x200>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+		resets = <&tegra_car 11>;
+		reset-names = "i2s";
+		dmas = <&apbdma 2>, <&apbdma 2>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s2: i2s@70002a00 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002a00 0x200>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+		resets = <&tegra_car 18>;
+		reset-names = "i2s";
+		dmas = <&apbdma 1>, <&apbdma 1>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+	 * driver, the compatible is "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	nand-controller@70008000 {
+		compatible = "nvidia,tegra20-nand";
+		reg = <0x70008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		clock-names = "nand";
+		resets = <&tegra_car 13>;
+		reset-names = "nand";
+		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		assigned-clock-rates = <150000000>;
+		status = "disabled";
+	};
+
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA20_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SPI>;
+		resets = <&tegra_car 43>;
+		reset-names = "spi";
+		dmas = <&apbdma 11>, <&apbdma 11>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_DVC>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra20-mc-gart";
+		reg = <0x7000f000 0x00000400>, /* controller registers */
+		      <0x58000000 0x02000000>; /* GART aperture */
+		clocks = <&tegra_car TEGRA20_CLK_MC>;
+		clock-names = "mc";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#reset-cells = <1>;
+		#iommu-cells = <0>;
+	};
+
+	memory-controller@7000f400 {
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x200>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_EMC>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	pcie@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800>, /* PADS registers */
+		      <0x80003800 0x00000200>, /* AFI registers */
+		      <0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>, /* port 0 registers */
+			 <0x02000000 0 0x80001000 0x80001000 0 0x00001000>, /* port 1 registers */
+			 <0x01000000 0 0          0x82000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		nvidia,has-legacy-mode;
+		clocks = <&tegra_car TEGRA20_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@c5000000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000000 0x4000>,
+		      <0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USBD>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,has-legacy-mode;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@c5004000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004000 0x4000>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@c5008000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008000 0x4000>,
+		      <0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		status = "disabled";
+	};
+
+	mmc@c8000000 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@c8000200 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@c8000400 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@c8000600 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
new file mode 100644
index 000000000..9f653ef41
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
new file mode 100644
index 000000000..86e138e8c
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+		     "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pcie@3000 {
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Apalis UART1 */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Apalis UART2 */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Apalis UART3 */
+	serial@70006200 {
+		status = "okay";
+	};
+
+	/* Apalis UART4 */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
+	/* Apalis SD1 */
+	mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* Apalis MMC1 */
+	mmc@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		vqmmc-supply = <&reg_vddio_sdmmc3>;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbo1_vbus>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "WAKE1_MICO";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* USBO1_EN */
+	reg_usbo1_vbus: regulator-usbo1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBO1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/*
+	 * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+	 * EN_+3.3_SDMMC3 GPIO
+	 */
+	reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_SDMMC3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-type = "voltage";
+		gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vddio_sdmmc_1v8_reg>;
+	};
+};
+
+&gpio {
+	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+	pex-perst-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PEX_PERST_N";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
new file mode 100644
index 000000000..6a3a72f81
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -0,0 +1,1202 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+
+		/* Apalis type specific */
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3-rts-n-pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3-cts-n-pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2-cs0-n-px3 {
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* CAN_INT2 */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM1 */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1-sck-px5 {
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd-sck-pz4 {
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EN_+3.3_SDMMC3 */
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-rts-n-pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+				 * is off
+				 */
+				vddio_sdmmc_1v8_reg: ldo1 {
+					regulator-name = "+VDDIO_SDMMC3_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "+V1.2_CSI";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	clk16m: osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
new file mode 100644
index 000000000..6544ce70b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -0,0 +1,1184 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+		avdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		hvdd-pex-supply = <&reg_module_3v3>;
+		vddio-pex-ctl-supply = <&reg_module_3v3>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+
+		/* Apalis type specific */
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		/* Apalis PCIe */
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		/* I210/I211 Gigabit Ethernet Controller (on-module) */
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+
+			ethernet@0,0 {
+				reg = <0 0 0 0 0>;
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3-rts-n-pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3-cts-n-pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2-cs0-n-px3 {
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* CAN_INT2 */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Digital Audio */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1-fs-pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis GPIO */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_row10_ps2",
+					      "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis HDMI1 */
+			hdmi-cec-pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C1 */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C2 (DDC) */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 (CAM) */
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis LCD1 */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3-dat0-pb7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis Parallel Camera */
+			cam-mclk-pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			kb-col2-pq2 {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row5-pr5 {
+				nvidia,pins = "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/*
+			 * VI level-shifter direction
+			 * (pull-down => default direction input)
+			 */
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM1 */
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SATA1_ACT# */
+			pex-l0-prsnt-n-pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1-clk-pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1-cmd-pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPDIF1 */
+			spdif-out-pk5 {
+				nvidia,pins = "spdif_out_pk5",
+					      "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1-sck-px5 {
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd-sck-pz4 {
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Apalis TS (Low-speed type specific)
+			 * pins may be used as GPIOs
+			 */
+			kb-col5-pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col6-pq6 {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row8_ps0",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2-rxd-pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3-rxd-pw7 {
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_EN */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBH_OC# */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2-i2c-sda-pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis VGA1 not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+			pex-l2-prsnt-n-pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7",
+					      "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+			pex-wake-n-pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN i210/i211 SMB_ALERT_N (On-module) */
+			sys-clk-req-pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk-32k-out-pa0 {
+				nvidia,pins = "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2-fs-pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "lcd_dc0_pn6",
+					      "lcd_m1_pw1",
+					      "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_dqs_pi2",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "lcd_cs1_n_pw0",
+					      "pu0",
+					      "pu1",
+					      "pu2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs6-n-pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs7-n-pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pwr2_pc6",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2-cts-n-pj5 {
+				nvidia,pins = "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "+V1.05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "+V1.2_CSI";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	clk16m: osc4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Apalis T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
new file mode 100644
index 000000000..a25b8560b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
new file mode 100644
index 000000000..06ef13ea5
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-ti-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
new file mode 100644
index 000000000..88ca03f57
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -0,0 +1,1280 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bfdf0000 {
+			compatible = "ramoops";
+			reg = <0xbfdf0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio@6000d000 {
+		init-mode {
+			gpio-hog;
+			gpios =	<TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		init-low-power-mode {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_cs1_n_pw0",
+						"lcd_sdin_pz2",
+						"lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad14_ph6",
+						"pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_adv_n_pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad15_ph7 {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+						"pu2",
+						"pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6",
+						"kb_row8_ps0",
+						"kb_row9_ps1",
+						"kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0",
+						"pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_miso_px1",
+						"spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs0_n_px3 {
+				nvidia,pins = "spi2_cs0_n_px3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+						"pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7",
+						"pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		touchscreen@10 {
+			compatible ="elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vcc_3v3_ts>;
+			vccio-supply = <&vcc_3v3_ts>;
+
+			touchscreen-size-x = <2112>;
+			touchscreen-size-y = <1280>;
+			touchscreen-swapped-x-y;
+			touchscreen-inverted-x;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		compass@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 0) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		accelerometer@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		fuel-gauge@55 {
+			compatible = "ti,bq27541";
+			reg = <0x55>;
+			power-supplies = <&power_supply>;
+			monitored-battery = <&battery_cell>;
+		};
+
+		power_supply: charger@6a {
+			compatible = "summit,smb347";
+			reg = <0x6a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,enable-usb-charging;
+
+			monitored-battery = <&battery_cell>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8>;
+
+		/* Azurewave AW-NH665 BCM4330 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 0 50000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		constant-charge-current-max-microamp = <1800000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	display-panel {
+		compatible = "hydis,hv070wx2-1e0", "chunghwa,claa070wp03xg",
+			     "panel-lvds";
+
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <94>;
+		height-mm = <150>;
+		rotation = <180>;
+
+		data-mapping = "jeida-24";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vcc_3v3_ts: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo_s-1167_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-grouper",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "ASUS Google Nexus 7 ALC5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		nct72-local {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+		};
+
+		nct72-remote {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
new file mode 100644
index 000000000..b25b3fa90
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@3c {
+			compatible = "maxim,max77663";
+			reg = <0x3c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			cpu-pwr-req {
+				gpio-hog;
+				gpios = <6 GPIO_ACTIVE_HIGH>;
+				input;
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_sys>;
+				in-sd1-supply = <&vdd_5v0_sys>;
+				in-sd2-supply = <&vdd_5v0_sys>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+				in-sd4-supply = <&vdd_5v0_sys>;
+
+				in-ldo0-1-supply = <&vdd_1v35>;
+				in-ldo2-supply   = <&vdd_3v3_sys>;
+				in-ldo3-5-supply = <&vdd_3v3_sys>;
+				in-ldo4-6-supply = <&vdd_5v0_sys>;
+				in-ldo7-8-supply = <&vdd_1v35>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_1v8: sd2 {
+					regulator-name = "vdd_gen1v8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v35: sd3 {
+					regulator-name = "vdd_ddr3l_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo3 {
+					regulator-name = "vcore_emmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_camera";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
new file mode 100644
index 000000000..bc0f6f29b
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -0,0 +1,1565 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0400013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
new file mode 100644
index 000000000..215e49765
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			regulators {
+				vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd2_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
new file mode 100644
index 000000000..a044dbd20
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,grouper", "nvidia,tegra30";
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+			clock-frequency = <100000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
new file mode 100644
index 000000000..f1c63feb4
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-tilapia.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
new file mode 100644
index 000000000..9169de34f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	/*
+	 * Tilapia's memory timings are pretty much the same as the Grouper's
+	 * ones. There are few minor tunings made for a higher clock rates,
+	 * these differentiating timings are overridden here for Tilapia.
+	 */
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0c000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
new file mode 100644
index 000000000..e3da89f19
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-tilapia-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-mode-3g {
+			gpio-hog;
+			gpios =	<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		proximity-sensor@28 {
+			compatible = "microchip,cap1106";
+			reg = <0x28>;
+
+			/*
+			 * Binding doesn't support specifying linux,input-type
+			 * and this results in unwanted key-presses handled by
+			 * applications, hence keep it disabled for now.
+			 */
+			status = "disabled";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,keycodes = <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <SW_FRONT_PROXIMITY>;
+		};
+
+		nfc@2a {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x2a>;
+
+			clock-frequency = <100000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
new file mode 100644
index 000000000..e0624b74f
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -0,0 +1,2135 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "NVIDIA Tegra30 Beaver evaluation board";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <1>;
+				nvidia,slew-rate-falling = <1>;
+			};
+			gpv {
+				nvidia,pins = "drive_gpv";
+				nvidia,pull-up-strength = <16>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v_in_reg>;
+			vcc2-supply = <&vdd_5v_in_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v_in_reg>;
+			vcc5-supply = <&vdd_5v_in_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v_in_reg>;
+			vccio-supply = <&vdd_5v_in_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&core_vdd_reg>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		core_vdd_reg: tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+		vqmmc-supply = <&ldo5_reg>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	phy2: usb-phy@7d004000 {
+		vbus-supply = <&sys_3v3_reg>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		gpled1 {
+			label = "LED1"; /* CR5A1 (blue) */
+			gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		};
+		gpled2 {
+			label = "LED2"; /* CR4A2 (green) */
+			gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vdd_5v_in_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_in";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	chargepump_5v_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "chargepump_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	ddr_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	vdd_5v_sata_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_sata";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	usb1_vbus_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	usb3_vbus_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	sys_3v3_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3,vdd_3v3_alw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
+
+	sys_3v3_pexs_reg: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3_pexs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_5v0_hdmi: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_5V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-beaver",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Beaver";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
new file mode 100644
index 000000000..4899e05a0
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+	mmc@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	ddr_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sys_3v3_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	usb3_vbus_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	vdd_5v0_reg: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl_reg: regulator@105 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
new file mode 100644
index 000000000..c1c0ca628
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+	mmc@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	ddr_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sys_3v3_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb1_vbus_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	usb3_vbus_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	vdd_5v0_reg: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl_reg: regulator@105 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_bl2_reg: regulator@106 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	i2c@7000d000 {
+		pmic: tps65911@2d {
+			regulators {
+				vddctrl_reg: vddctrl {
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vddcore_reg>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+			};
+		};
+
+		vddcore_reg: tps62361@60 {
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
new file mode 100644
index 000000000..57aead7d8
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/input.h>
+#include "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie@3000 {
+		status = "okay";
+
+		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		avdd-plle-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins =	"uart3_txd_pw6",
+						"uart3_cts_n_pa1",
+						"uart3_rts_n_pc0",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	panelddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2cmux@70 {
+			compatible = "nxp,pca9546";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x70>;
+			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wb01";
+		ddc-i2c-bus = <&panelddc>;
+
+		power-supply = <&vdd_pnl1_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	vdd_ac_bat_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	cam_1v8_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vio_reg>;
+	};
+
+	cp_5v_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	emmc_3v3_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	modem_3v3_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "modem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	pex_hvdd_3v3_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pex_hvdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam1_ldo_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam1_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam2_ldo_reg: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam2_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_cam3_ldo_reg: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam3_ldo";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_com_reg: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_fuse_3v3_reg: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fuse_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_pnl1_reg: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_vid_reg: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_vid";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
new file mode 100644
index 000000000..7d4a6ca49
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T30 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+		     "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/pmic@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+			hdmi-supply = <&reg_5v0>;
+		};
+	};
+
+	/* Colibri UART-A */
+	serial@70006000 {
+		status = "okay";
+	};
+
+	/* Colibri UART-C */
+	serial@70006040 {
+		status = "okay";
+	};
+
+	/* Colibri UART-B */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t0";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/* CAM_I2C (I2C3): unused */
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
+	/* SD/MMC */
+	mmc@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&reg_usbc_vbus>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&reg_usbh_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm 0 5000000>; /* PWM<A> */
+	};
+
+	clk16m: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	/* USBH_PEN resp. USB_P_EN */
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
new file mode 100644
index 000000000..e36aa3ce6
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -0,0 +1,1052 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
+ */
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			pll-supply = <&reg_1v8_avdd_hdmi_pll>;
+			vdd-supply = <&reg_3v3_avdd_hdmi>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Analogue Audio (On-module) */
+			clk1-out-pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3-fs-pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3",
+					      "dap3_din_pp1",
+					      "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Address/Data Bus (GMI) */
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad4_pg4",
+					      "gmi_ad5_pg5",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_ad8_ph0",
+					      "gmi_ad9_ph1",
+					      "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad12_ph4",
+					      "gmi_ad13_ph5",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1",
+					      "gmi_cs4_n_pk2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_iordy_pi5",
+					      "gmi_oe_n_pi1",
+					      "gmi_wait_pi7",
+					      "gmi_wr_n_pi0",
+					      "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5",
+					      "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_cs0_n_px6",
+					      "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2",
+					      "uart2_cts_n_pj5",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Further pins may be used as GPIOs */
+			dap4-din-pp5 {
+				nvidia,pins = "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7",
+					      "pbb7",
+					      "sdmmc1_clk_pz0",
+					      "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat3_py4",
+					      "uart3_cts_n_pa1",
+					      "uart3_txd_pw6",
+					      "uart3_rxd_pw7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-d18-pm2 {
+				nvidia,pins = "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdin_pz2",
+					      "pu0",
+					      "pu1",
+					      "pu2",
+					      "pu3",
+					      "pu4",
+					      "pu5",
+					      "pu6",
+					      "spi1_miso_px7",
+					      "uart3_rts_n_pc0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4",
+					      "pbb5",
+					      "pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed RDnWR and therefore disabled */
+			lcd-cs1-n-pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Multiplexed GMI_CLK and therefore disabled */
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+			sdmmc3-dat4-pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			/* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+			sdmmc3-dat5-pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri BL_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Backlight PWM<A> */
+			sdmmc3-dat3-pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri CAN_INT */
+			kb-row8-ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri DDC */
+			ddc-scl-pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri EXT_IO* */
+			gen2-i2c-scl-pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spdif-in-pk6 {
+				nvidia,pins =	"spdif_in_pk6";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri GPIO */
+			clk2-out-pw5 {
+				nvidia,pins = "clk2_out_pw5",
+					      "pcc2",
+					      "pv3",
+					      "sdmmc1_dat2_py5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-pwr1-pc1 {
+				nvidia,pins = "lcd_pwr1_pc1",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri HOTPLUG_DETECT (HDMI) */
+			hdmi-int-pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri I2C */
+			gen1-i2c-scl-pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri LCD (L_* resp. LDD<*>) */
+			lcd-d0-pe0 {
+				nvidia,pins = "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_pclk_pb3",
+					      "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * today's display need DE, disable LCD_M1
+			 */
+			lcd-m1-pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri MMC */
+			kb-row10-ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row11-ps3 {
+				nvidia,pins = "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Colibri MMC_CD */
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* Multiplexed and therefore disabled */
+			cam-mclk-pcc0 {
+				nvidia,pins =	"cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c-scl-pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+					      "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri nRESET_OUT */
+			gmi-rst-n-pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/*
+			 * Colibri Parallel Camera (Optional)
+			 * pins multiplexed with others and therefore disabled
+			 */
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_d0_pt4",
+					      "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d4_pl2",
+					      "vi_d5_pl3",
+					      "vi_d6_pl4",
+					      "vi_d7_pl5",
+					      "vi_d8_pl6",
+					      "vi_d9_pl7",
+					      "vi_d10_pt2",
+					      "vi_d11_pt3",
+					      "vi_hsync_pd7",
+					      "vi_mclk_pt1",
+					      "vi_pclk_pt0",
+					      "vi_vsync_pd6";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<B> */
+			sdmmc3-dat2-pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<C> */
+			sdmmc3-clk-pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri PWM<D> */
+			sdmmc3-cmd-pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri SSP */
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+			sdmmc3-dat6-pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-A */
+			ulpi-data0 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-B */
+			gmi-a16-pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART-C */
+			uart2-rxd {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri USBC_DET */
+			spdif-out-pk5 {
+				nvidia,pins =	"spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri USBH_PEN */
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri USBH_OC */
+			spi2-cs2-n-pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri VGA not supported and therefore disabled */
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4-clk-pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_cmd_pt7",
+					      "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-dat0-paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+			pex-l0-rst-n-pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1",
+					      "pex_wake_n_pdd3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			/* LAN_V_BUS, LAN_RESET# (On-module) */
+			pex-l0-clkreq-n-pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2",
+					      "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+			pex-l2-rst-n-pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Not connected and therefore disabled */
+			clk1-req-pee2 {
+				nvidia,pins = "clk1_req_pee2",
+					      "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk3_out_pee0",
+					      "clk3_req_pee1",
+					      "clk_32k_out_pa0",
+					      "hdmi_cec_pee3",
+					      "sys_clk_req_pz5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-dqs-pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+					      "kb_col2_pq2",
+					      "kb_col3_pq3",
+					      "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col1_pq1",
+					      "kb_col6_pq6",
+					      "kb_col7_pq7",
+					      "kb_row5_pr5",
+					      "kb_row6_pr6",
+					      "kb_row7_pr7",
+					      "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_row1_pr1",
+					      "kb_row2_pr2",
+					      "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pwr2-pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "hdcp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr-i2c-scl-pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd-dc1-pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* TOUCH_PEN_INT# (On-module) */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		clock-frequency = <10000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller (On-module)
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* SGTL5000 audio codec */
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			#sound-dai-cells = <0>;
+			VDDA-supply = <&reg_module_3v3_audio>;
+			VDDD-supply = <&reg_1v8_vio>;
+			VDDIO-supply = <&reg_module_3v3>;
+			clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&reg_module_3v3>;
+			vcc2-supply = <&reg_module_3v3>;
+			vcc3-supply = <&reg_1v8_vio>;
+			vcc4-supply = <&reg_module_3v3>;
+			vcc5-supply = <&reg_module_3v3>;
+			vcc6-supply = <&reg_1v8_vio>;
+			vcc7-supply = <&reg_5v0_charge_pump>;
+			vccio-supply = <&reg_module_3v3>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "+V1.35_VDDIO_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: unused */
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "+V1.0_VDD_CPU";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also +V3.3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "EN_+V3.3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* LDO3: unused */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "+V1.2_VDD_RTC";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for (unsupported) analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "+V2.8_AVDD_VDAC";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "+V1.05_AVDD_PLLE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "+V1.2_AVDD_PLL";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "+V1.0_VDD_DDR_HS";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		touchscreen@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* forbid to use ADC channels 3-0 (touch) */
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		regulator@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x1>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080500 {
+			status = "okay";
+		};
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&reg_module_3v3>; /* VCC */
+		vqmmc-supply = <&reg_1v8_vio>; /* VCCQ */
+		mmc-ddr-1_8v;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
+	usb@7d004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		asix@1 {
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&reg_lan_v_bus>;
+	};
+
+	clk32k_in: xtal1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_1v8_vio>;
+	};
+
+	reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_HDMI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_5v0_charge_pump: regulator-5v0-charge-pump {
+		compatible = "regulator-fixed";
+		regulator-name = "+V5.0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_lan_v_bus: regulator-lan-v-bus {
+		compatible = "regulator-fixed";
+		regulator-name = "LAN_V_BUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO_AVDD_S";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
+			     "nvidia,tegra-audio-sgtl5000";
+		nvidia,model = "Toradex Colibri T30";
+		nvidia,audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack";
+		nvidia,i2s-controller = <&tegra_i2s2>;
+		nvidia,audio-codec = <&sgtl5000>;
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+};
+
+&gpio {
+	lan-reset-n {
+		gpio-hog;
+		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LAN_RESET#";
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
new file mode 100644
index 000000000..1be715d2a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: cpu_opp_table0 {
+		opp@51000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@51000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@51000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@102000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@102000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@102000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@204000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@204000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@204000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@312000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@312000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@340000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@340000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@370000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@456000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@456000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@475000000,800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp@475000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@608000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@608000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@620000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@640000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@640000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@760000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@760000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@760000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@760000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@816000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@816000000,912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp@860000000,850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp@860000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@860000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@860000000,1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp@910000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@1000000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@1000000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@1000000000,1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp@1000000000,1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp@1100000000,900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp@1100000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@1100000000,1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp@1100000000,1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp@1100000000,1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp@1150000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@1200000000,975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp@1200000000,1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp@1200000000,1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp@1200000000,1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp@1200000000,1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp@1200000000,1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp@1300000000,1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp@1300000000,1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp@1300000000,1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp@1300000000,1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp@1300000000,1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp@1300000000,1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp@1300000000,1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp@1300000000,1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp@1400000000,1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp@1400000000,1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp@1400000000,1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp@1400000000,1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp@1400000000,1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp@1500000000,1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp@1500000000,1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp@1500000000,1200 {
+			opp-microvolt = <1200000 1200000 1250000>;
+		};
+
+		opp@1500000000,1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp@1600000000,1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp@1600000000,1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp@1700000000,1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp@1700000000,1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
new file mode 100644
index 000000000..0f7135006
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: cpu_opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@51000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp@51000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp@51000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <51000000>;
+		};
+
+		opp@102000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp@102000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp@102000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <102000000>;
+		};
+
+		opp@204000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x31FE>;
+			opp-hz = /bits/ 64 <204000000>;
+		};
+
+		opp@204000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C01>;
+			opp-hz = /bits/ 64 <204000000>;
+		};
+
+		opp@204000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <204000000>;
+		};
+
+		opp@312000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C00>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp@312000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp@340000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0192>;
+			opp-hz = /bits/ 64 <340000000>;
+		};
+
+		opp@340000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>;
+			opp-hz = /bits/ 64 <340000000>;
+		};
+
+		opp@370000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x306C>;
+			opp-hz = /bits/ 64 <370000000>;
+		};
+
+		opp@456000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0C00>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp@456000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		opp@475000000,800 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x31FE>;
+			opp-hz = /bits/ 64 <475000000>;
+		};
+
+		opp@475000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>, <0x01 0x0002>,
+					   <0x01 0x0010>, <0x01 0x0080>,
+					   <0x01 0x0100>;
+			opp-hz = /bits/ 64 <475000000>;
+		};
+
+		opp@608000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0400>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@608000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <608000000>;
+		};
+
+		opp@620000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x306C>;
+			opp-hz = /bits/ 64 <620000000>;
+		};
+
+		opp@640000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0F 0x0001>, <0x02 0x0002>,
+					   <0x04 0x0002>, <0x08 0x0002>,
+					   <0x02 0x0010>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x02 0x0080>,
+					   <0x04 0x0080>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x02 0x0100>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <640000000>;
+		};
+
+		opp@640000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <640000000>;
+		};
+
+		opp@760000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1E 0x3461>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>, <0x01 0x0400>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
+					   <0x04 0x0002>, <0x02 0x0004>,
+					   <0x04 0x0004>, <0x02 0x0008>,
+					   <0x04 0x0008>, <0x02 0x0010>,
+					   <0x04 0x0010>, <0x02 0x0080>,
+					   <0x04 0x0080>, <0x02 0x0100>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@760000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <760000000>;
+		};
+
+		opp@816000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0400>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@816000000,912 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x1F 0x0200>;
+			opp-hz = /bits/ 64 <816000000>;
+		};
+
+		opp@860000000,850 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0C 0x0001>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp@860000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
+					   <0x08 0x0002>, <0x04 0x0004>,
+					   <0x08 0x0004>, <0x04 0x0008>,
+					   <0x08 0x0008>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x04 0x0080>,
+					   <0x08 0x0080>, <0x10 0x0080>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp@860000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
+					   <0x02 0x0004>, <0x02 0x0008>,
+					   <0x02 0x0010>, <0x02 0x0080>,
+					   <0x02 0x0100>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp@860000000,1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <860000000>;
+		};
+
+		opp@910000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x3060>;
+			opp-hz = /bits/ 64 <910000000>;
+		};
+
+		opp@1000000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x0C 0x0001>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x03 0x0001>, <0x04 0x0002>,
+					   <0x08 0x0002>, <0x04 0x0004>,
+					   <0x08 0x0004>, <0x04 0x0008>,
+					   <0x08 0x0008>, <0x04 0x0010>,
+					   <0x08 0x0010>, <0x04 0x0080>,
+					   <0x08 0x0080>, <0x10 0x0080>,
+					   <0x04 0x0100>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1000000000,1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1000000000>;
+		};
+
+		opp@1100000000,900 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp@1100000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x06 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp@1100000000,1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>, <0x04 0x0002>,
+					   <0x04 0x0004>, <0x04 0x0008>,
+					   <0x04 0x0010>, <0x04 0x0080>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp@1100000000,1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp@1100000000,1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1100000000>;
+		};
+
+		opp@1150000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x3060>;
+			opp-hz = /bits/ 64 <1150000000>;
+		};
+
+		opp@1200000000,975 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0080>,
+					   <0x10 0x0080>, <0x08 0x0100>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
+					   <0x04 0x0004>, <0x04 0x0008>,
+					   <0x04 0x0010>, <0x04 0x0080>,
+					   <0x04 0x0100>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1050 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x019E>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1200000000,1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0192>;
+			opp-hz = /bits/ 64 <1200000000>;
+		};
+
+		opp@1300000000,1000 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0001>, <0x10 0x0080>,
+					   <0x10 0x0100>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1025 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
+					   <0x08 0x0080>, <0x08 0x0100>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1050 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x12 0x3061>, <0x04 0x0002>,
+					   <0x08 0x0004>, <0x08 0x0008>,
+					   <0x08 0x0010>, <0x08 0x0020>,
+					   <0x08 0x0040>, <0x04 0x0080>,
+					   <0x04 0x0100>, <0x08 0x1000>,
+					   <0x08 0x2000>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1075 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0182>, <0x04 0x0004>,
+					   <0x04 0x0008>, <0x04 0x0010>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x001C>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0001>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0182>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1300000000,1175 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1300000000>;
+		};
+
+		opp@1400000000,1100 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x18 0x307C>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp@1400000000,1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x000C>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp@1400000000,1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x000C>, <0x04 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp@1400000000,1175 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp@1400000000,1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+
+		opp@1500000000,1125 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x0010>, <0x10 0x0020>,
+					   <0x10 0x0040>, <0x10 0x1000>,
+					   <0x10 0x2000>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp@1500000000,1150 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x04 0x0010>, <0x08 0x0020>,
+					   <0x08 0x0040>, <0x08 0x1000>,
+					   <0x08 0x2000>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp@1500000000,1200 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x02 0x0010>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp@1500000000,1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x01 0x0010>;
+			opp-hz = /bits/ 64 <1500000000>;
+		};
+
+		opp@1600000000,1212 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x10 0x3060>;
+			opp-hz = /bits/ 64 <1600000000>;
+		};
+
+		opp@1600000000,1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x3060>;
+			opp-hz = /bits/ 64 <1600000000>;
+		};
+
+		opp@1700000000,1212 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x10 0x3060>;
+			opp-hz = /bits/ 64 <1700000000>;
+		};
+
+		opp@1700000000,1237 {
+			clock-latency-ns = <100000>;
+			opp-supported-hw = <0x08 0x3060>;
+			opp-hz = /bits/ 64 <1700000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
new file mode 100644
index 000000000..aeae8c092
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -0,0 +1,1073 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra30-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra30-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
+
+	pcie@3000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800>, /* PADS registers */
+		      <0x00003800 0x00000200>, /* AFI registers */
+		      <0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x00000000 0x00000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x00001000 0x00001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x02000000 0 0x00004000 0x00004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0          0x02000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0x20000000 0x20000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra30-host1x";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+
+			iommus = <&mc TEGRA_SWGROUP_MPE>;
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+
+			iommus = <&mc TEGRA_SWGROUP_EPP>;
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP>;
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+
+			iommus = <&mc TEGRA_SWGROUP_G2>;
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D>,
+				 <&tegra_car TEGRA30_CLK_GR3D2>;
+			clock-names = "3d", "3d2";
+			resets = <&tegra_car 24>,
+				 <&tegra_car 98>;
+			reset-names = "3d", "3d2";
+
+			iommus = <&mc TEGRA_SWGROUP_NV>,
+				 <&mc TEGRA_SWGROUP_NV2>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
+				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIB>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 84>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x50040600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&tegra_car TEGRA30_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <6 6 2>;
+		arm,tag-latency = <5 5 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra30-ictlr";
+		reg = <0x60004000 0x100>,
+		      <0x60004100 0x50>,
+		      <0x60004200 0x50>,
+		      <0x60004300 0x50>,
+		      <0x60004400 0x50>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra30-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra30-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c000 {
+		compatible = "nvidia,tegra30-ahb";
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	actmon@6000c800 {
+		compatible = "nvidia,tegra30-actmon";
+		reg = <0x6000c800 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_ACTMON>,
+			 <&tegra_car TEGRA30_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car TEGRA30_CLK_ACTMON>;
+		reset-names = "actmon";
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		/*
+		gpio-ranges = <&pinmux 0 0 248>;
+		*/
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0x0d4>, /* Pad control registers */
+		      <0x70003000 0x3e4>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gmi@70009000 {
+		compatible = "nvidia,tegra30-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x48000000 0x7ffffff>;
+		clocks = <&tegra_car TEGRA30_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA30_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		clock-names = "div-clk", "fast-clk";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
+		resets = <&tegra_car 106>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	memory-controller@7000f400 {
+		compatible = "nvidia,tegra30-emc";
+		reg = <0x7000f400 0x400>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_EMC>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra30-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_HDA>,
+			 <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra30-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA30_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>;  /* spdif */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mmc@78000000 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000200 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000400 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@78000600 {
+		compatible = "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
new file mode 100644
index 000000000..ef6d586ce
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
new file mode 100644
index 000000000..70e5635c7
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
new file mode 100644
index 000000000..62b7d9f9a
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao TNY A9263";
+	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
new file mode 100644
index 000000000..118d766a1
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tps6507x.dtsi b/arch/arm/boot/dts/tps6507x.dtsi
new file mode 100644
index 000000000..db4809d30
--- /dev/null
+++ b/arch/arm/boot/dts/tps6507x.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65070.pdf
+ */
+
+&tps {
+	compatible = "ti,tps6507x";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "VDCDC1";
+		};
+
+		vdcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "VDCDC2";
+		};
+
+		vdcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "VDCDC3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "LDO1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "LDO2";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
new file mode 100644
index 000000000..0d463de56
--- /dev/null
+++ b/arch/arm/boot/dts/tps65217.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	charger {
+		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
+		status = "disabled";
+	};
+
+	pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
+		status = "disabled";
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi
new file mode 100644
index 000000000..a941d1e62
--- /dev/null
+++ b/arch/arm/boot/dts/tps65910.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65910";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vrtc_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "vrtc";
+		};
+
+		vio_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "vio";
+		};
+
+		vdd1_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "vdd1";
+		};
+
+		vdd2_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "vdd2";
+		};
+
+		vdd3_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "vdd3";
+		};
+
+		vdig1_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "vdig1";
+		};
+
+		vdig2_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "vdig2";
+		};
+
+		vpll_reg: regulator@7 {
+			reg = <7>;
+			regulator-compatible = "vpll";
+		};
+
+		vdac_reg: regulator@8 {
+			reg = <8>;
+			regulator-compatible = "vdac";
+		};
+
+		vaux1_reg: regulator@9 {
+			reg = <9>;
+			regulator-compatible = "vaux1";
+		};
+
+		vaux2_reg: regulator@10 {
+			reg = <10>;
+			regulator-compatible = "vaux2";
+		};
+
+		vaux33_reg: regulator@11 {
+			reg = <11>;
+			regulator-compatible = "vaux33";
+		};
+
+		vmmc_reg: regulator@12 {
+			reg = <12>;
+			regulator-compatible = "vmmc";
+		};
+
+		vbb_reg: regulator@13 {
+			reg = <13>;
+			regulator-compatible = "vbb";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
new file mode 100644
index 000000000..93e07c187
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+	compatible = "ti,twl4030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	charger: bci {
+		compatible = "ti,twl4030-bci";
+		interrupts = <9>, <2>;
+		bci3v1-supply = <&vusb3v1>;
+		io-channels = <&twl_madc 11>;
+		io-channel-names = "vac";
+	};
+
+	watchdog {
+		compatible = "ti,twl4030-wdt";
+	};
+
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl4030-vaux1";
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl4030-vaux3";
+	};
+
+	vaux4: regulator-vaux4 {
+		compatible = "ti,twl4030-vaux4";
+	};
+
+	vcc: regulator-vdd1 {
+		compatible = "ti,twl4030-vdd1";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1450000>;
+	};
+
+	vdac: regulator-vdac {
+		compatible = "ti,twl4030-vdac";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vio: regulator-vio {
+		compatible = "ti,twl4030-vio";
+	};
+
+	vintana1: regulator-vintana1 {
+		compatible = "ti,twl4030-vintana1";
+	};
+
+	vintana2: regulator-vintana2 {
+		compatible = "ti,twl4030-vintana2";
+	};
+
+	vintdig: regulator-vintdig {
+		compatible = "ti,twl4030-vintdig";
+	};
+
+	vmmc1: regulator-vmmc1 {
+		compatible = "ti,twl4030-vmmc1";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	vmmc2: regulator-vmmc2 {
+		compatible = "ti,twl4030-vmmc2";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vpll1: regulator-vpll1 {
+		compatible = "ti,twl4030-vpll1";
+	};
+
+	vpll2: regulator-vpll2 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	twl_gpio: gpio {
+		compatible = "ti,twl4030-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	usb2_phy: twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+		#phy-cells = <0>;
+	};
+
+	twl_pwm: pwm {
+		compatible = "ti,twl4030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		compatible = "ti,twl4030-pwmled";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};
+
+	twl_madc: madc {
+		compatible = "ti,twl4030-madc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
new file mode 100644
index 000000000..683419d5c
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ */
+
+&twl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
+};
+
+&omap3_pmx_core {
+	/*
+	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
+	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
+	 * defaults for the SYS_NIRQ pin here.
+	 */
+	twl4030_pins: pinmux_twl4030_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+	twl4030_vpins: pinmux_twl4030_vpins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
+			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
+			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
new file mode 100644
index 000000000..9d588cfaa
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator-vmmc {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator-vpp {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator-vusim {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator-vdac {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator-vana {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator-vcxio {
+		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
+	};
+
+	vusb: regulator-vusb {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator-v1v8 {
+		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
+	};
+
+	v2v1: regulator-v2v1 {
+		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		/* provides one PWM (id 0 for Charging indicator LED) */
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+
+	gpadc {
+		compatible = "ti,twl6030-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
new file mode 100644
index 000000000..5730e46b0
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
new file mode 100644
index 000000000..c46c2e8a1
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD4 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 8>;
+};
+
+&serialsc {
+	interrupts = <1 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq1 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
new file mode 100644
index 000000000..b52957ccd
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD4 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-ld4";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <136>;
+			socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-ld4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			has-transaction-translator;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld4-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-ld4-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet: interrupt-controller@61830000 {
+			compatible = "socionext,uniphier-ld4-aidet";
+			reg = <0x61830000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
new file mode 100644
index 000000000..5bc7fe11b
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD6b Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld6b.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serialsc;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <4 8>;
+};
+
+&serialsc {
+	interrupts = <4 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi
new file mode 100644
index 000000000..4d07a94c6
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD6b SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/*
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
+ */
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	compatible = "socionext,uniphier-ld6b";
+};
+
+/* UART3 unavailable: the pads are not wired to the package balls */
+&serial3 {
+	status = "disabled";
+};
+
+/*
+ * LD6b and PXs2 have completely different packages,
+ * which makes the pinctrl driver unshareable.
+ */
+&pinctrl {
+	compatible = "socionext,uniphier-ld6b-pinctrl";
+};
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000..c0fd029b3
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier SoCs default pinctrl settings
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&pinctrl {
+	pinctrl_aout: aout {
+		groups = "aout";
+		function = "aout";
+	};
+
+	pinctrl_ain1: ain1 {
+		groups = "ain1";
+		function = "ain1";
+	};
+
+	pinctrl_ain2: ain2 {
+		groups = "ain2";
+		function = "ain2";
+	};
+
+	pinctrl_ainiec1: ainiec1 {
+		groups = "ainiec1";
+		function = "ainiec1";
+	};
+
+	pinctrl_aout1: aout1 {
+		groups = "aout1";
+		function = "aout1";
+	};
+
+	pinctrl_aout2: aout2 {
+		groups = "aout2";
+		function = "aout2";
+	};
+
+	pinctrl_aout3: aout3 {
+		groups = "aout3";
+		function = "aout3";
+	};
+
+	pinctrl_aoutiec1: aoutiec1 {
+		groups = "aoutiec1";
+		function = "aoutiec1";
+	};
+
+	pinctrl_aoutiec2: aoutiec2 {
+		groups = "aoutiec2";
+		function = "aoutiec2";
+	};
+
+	pinctrl_emmc: emmc {
+		groups = "emmc", "emmc_dat8";
+		function = "emmc";
+	};
+
+	pinctrl_ether_mii: ether-mii {
+		groups = "ether_mii";
+		function = "ether_mii";
+	};
+
+	pinctrl_ether_rgmii: ether-rgmii {
+		groups = "ether_rgmii";
+		function = "ether_rgmii";
+	};
+
+	pinctrl_ether_rmii: ether-rmii {
+		groups = "ether_rmii";
+		function = "ether_rmii";
+	};
+
+	pinctrl_ether1_rgmii: ether1-rgmii {
+		groups = "ether1_rgmii";
+		function = "ether1_rgmii";
+	};
+
+	pinctrl_ether1_rmii: ether1-rmii {
+		groups = "ether1_rmii";
+		function = "ether1_rmii";
+	};
+
+	pinctrl_i2c0: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	pinctrl_i2c1: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	pinctrl_i2c2: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	pinctrl_i2c3: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+
+	pinctrl_i2c4: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	pinctrl_i2c5: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	pinctrl_i2c6: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
+	pinctrl_nand: nand {
+		groups = "nand";
+		function = "nand";
+	};
+
+	pinctrl_nand2cs: nand2cs {
+		groups = "nand", "nand_cs1";
+		function = "nand";
+	};
+
+	pinctrl_pcie: pcie {
+		groups = "pcie";
+		function = "pcie";
+	};
+
+	pinctrl_sd: sd {
+		groups = "sd";
+		function = "sd";
+	};
+
+	pinctrl_sd_uhs: sd-uhs {
+		groups = "sd";
+		function = "sd";
+	};
+
+	pinctrl_sd1: sd1 {
+		groups = "sd1";
+		function = "sd1";
+	};
+
+	pinctrl_spi0: spi0 {
+		groups = "spi0";
+		function = "spi0";
+	};
+
+	pinctrl_spi1: spi1 {
+		groups = "spi1";
+		function = "spi1";
+	};
+
+	pinctrl_spi2: spi2 {
+		groups = "spi2";
+		function = "spi2";
+	};
+
+	pinctrl_spi3: spi3 {
+		groups = "spi3";
+		function = "spi3";
+	};
+
+	pinctrl_system_bus: system-bus {
+		groups = "system_bus", "system_bus_cs1";
+		function = "system_bus";
+	};
+
+	pinctrl_uart0: uart0 {
+		groups = "uart0";
+		function = "uart0";
+	};
+
+	pinctrl_uart1: uart1 {
+		groups = "uart1";
+		function = "uart1";
+	};
+
+	pinctrl_uart2: uart2 {
+		groups = "uart2";
+		function = "uart2";
+	};
+
+	pinctrl_uart3: uart3 {
+		groups = "uart3";
+		function = "uart3";
+	};
+
+	pinctrl_usb0: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	pinctrl_usb1: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+
+	pinctrl_usb2: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+
+	pinctrl_usb3: usb3 {
+		groups = "usb3";
+		function = "usb3";
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
new file mode 100644
index 000000000..27ff2b7b9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Ace Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
new file mode 100644
index 000000000..3b9b61314
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serialsc;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <2 8>;
+};
+
+&serialsc {
+	interrupts = <2 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&gpio {
+	xirq2 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
new file mode 100644
index 000000000..7b6faf2e7
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 Sanji Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pro4.dtsi"
+
+/ {
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
new file mode 100644
index 000000000..a53b73ee9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro4 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-pro4";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(768 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <248>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-pro4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-pro4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-pro4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 5>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd1: mmc@5a600000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a600000 0x200>;
+			interrupts = <0 85 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clocks = <&mio_clk 2>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 2>, <&mio_rst 5>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
+		usb2: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb3: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro4-pinctrl";
+			};
+
+			usb-phy {
+				compatible = "socionext,uniphier-pro4-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb0_vbus>;
+				};
+
+				usb_phy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <0>;
+					vbus-supply = <&usb1_vbus>;
+				};
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pro4-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x14>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pro4-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pro4-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "gio", "ether", "ether-gb", "ether-phy";
+			clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>,
+				 <&sys_clk 10>;
+			reset-names = "gio", "ether";
+			resets = <&sys_rst 12>, <&sys_rst 6>;
+			phy-mode = "rgmii";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 134 4>, <0 135 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 4>;
+			phys = <&usb_phy2>, <&usb0_ssphy>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x100>;
+
+			usb0_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_ssphy: ss-phy@10 {
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
+				reg = <0x10 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus>;
+			};
+
+			usb0_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host", "peripheral";
+			interrupts = <0 137 4>, <0 138 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 4>;
+			phys = <&usb_phy3>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x100>;
+
+			usb1_vbus: regulator@0 {
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
+				reg = <0 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_rst: reset@40 {
+				compatible = "socionext,uniphier-pro4-usb3-reset";
+				reg = <0x40 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
new file mode 100644
index 000000000..352512583
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Pro5 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/ {
+	compatible = "socionext,uniphier-pro5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+		};
+	};
+
+	cpu_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-116667000 {
+			opp-hz = /bits/ 64 <116667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-175000000 {
+			opp-hz = /bits/ 64 <175000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-233334000 {
+			opp-hz = /bits/ 64 <233334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-466667000 {
+			opp-hz = /bits/ 64 <466667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-933334000 {
+			opp-hz = /bits/ 64 <933334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+			next-level-cache = <&l3>;
+		};
+
+		l3: cache-controller@500c8000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
+			      <0x506c8000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(2 * 1024 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <256>;
+			cache-level = <3>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 11>;	/* common with spi0 */
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>;
+			gpio-ranges-group-names = "gpio_range";
+			ngpios = <248>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* i2c4 does not exist */
+
+		/* chip-internal connection for DMD */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pro5-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pro5-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pro5-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pro5-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pro5-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pro5-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pro5-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pro5-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pro5-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@130 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x130 0x8>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x28>;
+			};
+
+			efuse@300 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x300 0x14>;
+			};
+
+			efuse@400 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x400 0x8>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pro5-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pro5-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pro5-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pro5-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 14>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <0 137 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pro5-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pro5-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pro5-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@280 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x280 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@290 {
+				compatible = "socionext,uniphier-pro5-usb3-hsphy";
+				reg = <0x290 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@380 {
+				compatible = "socionext,uniphier-pro5-usb3-ssphy";
+				reg = <0x380 0x10>;
+				#phy-cells = <0>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 15>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		pcie_ep: pcie-ep@66000000 {
+			compatible = "socionext,uniphier-pro5-pcie-ep",
+				     "snps,dw-pcie-ep";
+			status = "disabled";
+			reg-names = "dbi", "dbi2", "link", "addr_space";
+			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+			      <0x66010000 0x10000>, <0x67000000 0x400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+			num-ib-windows = <16>;
+			num-ob-windows = <16>;
+			num-lanes = <4>;
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pro5-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+
+		emmc: mmc@68400000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68400000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: mmc@68800000 {
+			compatible = "socionext,uniphier-sd-v3.1";
+			status = "disabled";
+			reg = <0x68800000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
new file mode 100644
index 000000000..759384b60
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 Gentil Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier PXs2";
+		dais = <&i2s_port2>;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2s_aux {
+	dai-format = "i2s";
+	remote-endpoint = <&wm_speaker>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			wm_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_aux>;
+			};
+		};
+	};
+};
+
+&emmc {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
new file mode 100644
index 000000000..7e08a459f
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 Vodka Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs2.dtsi"
+
+/ {
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial2;
+		serial1 = &serial0;
+		serial2 = &serial1;
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier PXs2";
+		dais = <&spdif_port0
+			&comp_spdif_port0>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
new file mode 100644
index 000000000..03301ddb3
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -0,0 +1,794 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs2 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	cpu_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;	/* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;	/* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			cache-unified;
+			cache-size = <(1280 * 1024)>;
+			cache-sets = <512>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 216 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1";
+			ngpios = <232>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-pxs2-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <0 144 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ain1>,
+				    <&pinctrl_ain2>,
+				    <&pinctrl_ainiec1>,
+				    <&pinctrl_aout2>,
+				    <&pinctrl_aout3>,
+				    <&pinctrl_aoutiec1>,
+				    <&pinctrl_aoutiec2>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_line: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_aux: endpoint {
+				};
+			};
+
+			spdif_port0: port@3 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			spdif_port1: port@4 {
+				spdif_iecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@5 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+
+			comp_spdif_port1: port@6 {
+				comp_spdif_iecout1: endpoint {
+				};
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for STM */
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-pxs2-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock {
+				compatible = "socionext,uniphier-pxs2-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-pxs2-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-pxs2-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-pxs2-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-pxs2-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a000000 0x800>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sd_clk 1>;
+			reset-names = "host", "hw";
+			resets = <&sd_rst 1>, <&sd_rst 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		soc_glue: soc-glue@5f800000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs2-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x58>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs2-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-pxs2-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-pxs2-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-pxs2-reset";
+				#reset-cells = <1>;
+			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs2-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f86 0x6844>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs2-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <0 66 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65b00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb0_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+
+			usb0_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: ss-phy@310 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-glue@65d00000 {
+			compatible = "socionext,uniphier-pxs2-dwc3-glue",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset@0 {
+				compatible = "socionext,uniphier-pxs2-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs2-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 15>;
+				reset-names = "link";
+				resets = <&sys_rst 15>;
+			};
+
+			usb1_hsphy0: hs-phy@200 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+
+			usb1_hsphy1: hs-phy@210 {
+				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 20>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+			};
+
+			usb1_ssphy0: ss-phy@300 {
+				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 15>, <&sys_clk 21>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 15>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000..a11897669
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Reference Daughter Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "microchip,24lc128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
new file mode 100644
index 000000000..6db949ec7
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier sLD8 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-sld8.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 8>;
+};
+
+&serialsc {
+	interrupts = <0 8>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
new file mode 100644
index 000000000..96a766deb
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier sLD8 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/uniphier-gpio.h>
+
+/ {
+	compatible = "socionext,uniphier-sld8";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
+		arm_timer_clk: arm-timer {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		l2: cache-controller@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(256 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		spi: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 39 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 104 0 0>,
+				      <&pinctrl 112 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <136>;
+			socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld8-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld8-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld8-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-sld8-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-sld8-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-sld8-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		dmac: dma-controller@5a000000 {
+			compatible = "socionext,uniphier-mio-dmac";
+			reg = <0x5a000000 0x1000>;
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+				     <0 71 4>, <0 72 4>, <0 73 4>;
+			clocks = <&mio_clk 7>;
+			resets = <&mio_rst 7>;
+			#dma-cells = <1>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 4>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: mmc@5a500000 {
+			compatible = "socionext,uniphier-sd-v2.91";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge", "hw";
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+			dma-names = "rx-tx";
+			dmas = <&dmac 6>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+			non-removable;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			has-transaction-translator;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-sld8-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-sld8-pinctrl";
+			};
+		};
+
+		soc-glue@5f900000 {
+			compatible = "socionext,uniphier-sld8-soc-glue-debug",
+				     "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x14>;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet: interrupt-controller@61830000 {
+			compatible = "socionext,uniphier-sld8-aidet";
+			reg = <0x61830000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sld8-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld8-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld8-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
new file mode 100644
index 000000000..444802fee
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier Support Card (Expansion Board)
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+&system_bus {
+	status = "okay";
+	ranges = <1 0x00000000 0x42000000 0x02000000>;
+	interrupt-parent = <&gpio>;
+
+	ethsc: ethernet@1,1f00000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <1 0x01f00000 0x1000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+	};
+
+	serialsc: serial@1,1fb0000 {
+		compatible = "ns16550a";
+		reg = <1 0x01fb0000 0x20>;
+		clock-frequency = <12288000>;
+		reg-shift = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
new file mode 100644
index 000000000..6cfa83921
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	ahb {
+		apb {
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
new file mode 100644
index 000000000..8744b5f6f
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
new file mode 100644
index 000000000..8a0cfbfd0
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffa4000 {
+				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+
+		ebi0: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+			linux,code = <28>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 000000000..08d580812
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+/ {
+	ahb {
+		apb {
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+		};
+	};
+
+	i2c-gpio@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+		};
+
+/*
+* led already used by mother board but active as high
+*		user_led2 {
+*			label = "user_led2";
+*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+*		};
+*/
+		user_led3 {
+			label = "user_led3";
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
+		};
+
+		user_led4 {
+			label = "user_led4";
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb1 {
+			label = "user_pb1";
+			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+		};
+
+		user_pb2 {
+			label = "user_pb2";
+			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+		};
+
+		user_pb3 {
+			label = "user_pb3";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+		};
+
+		user_pb4 {
+			label = "user_pb4";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 000000000..2f667b083
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
new file mode 100644
index 000000000..7d10b36db
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20_lpw.dts b/arch/arm/boot/dts/usb_a9g20_lpw.dts
new file mode 100644
index 000000000..f65712015
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20_lpw.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Caloa USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "usb_a9g20_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc-slot@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
new file mode 100644
index 000000000..c577ff4bb
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Versatile AB with the IB2 expansion board mounted.
+ * This works as a superset of the Versatile AB.
+ */
+
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile AB + IB2 board";
+
+	/* Special IB2 control register */
+	syscon@27000000 {
+		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
+		reg = <0x27000000 0x4>;
+
+		led@00.4 {
+			compatible = "register-bit-led";
+			offset = <0x00>;
+			mask = <0x10>;
+			label = "versatile-ib2:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
new file mode 100644
index 000000000..151c02200
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
+		reg = <0x10000000 0x200>;
+
+		led@08.0 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@08.1 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@08.2 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@08.3 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@08.4 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@08.5 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@08.6 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@08.7 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: cm_aux_osc@24M {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: pclk@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	flash@34000000 {
+		/* 64 MiB NOR flash in non-interleaved chips */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x34000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: interrupt-controller@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+			valid-mask = <0xffffffff>;
+		};
+
+		sic: interrupt-controller@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: uart@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: uart@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 800x600 16bpp @ 36MHz works fine */
+			max-memory-bandwidth = <54000000>;
+
+			/*
+			 * This port is routed through a PLD (Programmable
+			 * Logic Device) that routes the output from the CLCD
+			 * (after transformations) to the VGA DAC and also an
+			 * external panel connector. The PLD is essential for
+			 * supporting RGB565/BGR565.
+			 *
+			 * The signals from the port thus reaches two endpoints.
+			 * The PLD is managed through a few special bits in the
+			 * FPGA "sysreg".
+			 *
+			 * This arrangement can be clearly seen in
+			 * ARM DUI 0225D, page 3-41, figure 3-19.
+			 */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clcd_pads_panel: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+				clcd_pads_vga_dac: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		spi@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			sysreg@0 {
+				compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+				reg = <0x00000 0x1000>;
+
+				panel: display@0 {
+					compatible = "arm,versatile-tft-panel";
+
+					port {
+						panel_in: endpoint {
+							remote-endpoint = <&clcd_pads_panel>;
+						};
+					};
+				};
+			};
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
+			};
+			mmc@5000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
new file mode 100644
index 000000000..e7e751a85
--- /dev/null
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "versatile-ab.dts"
+
+/ {
+	model = "ARM Versatile PB";
+	compatible = "arm,versatile-pb";
+
+	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: interrupt-controller@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
+		gpio2: gpio@101e6000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e6000 0x1000>;
+			interrupts = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@101e7000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e7000 0x1000>;
+			interrupts = <9>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pci@10001000 {
+			compatible = "arm,versatile-pci";
+			device_type = "pci";
+			reg = <0x10001000 0x1000
+			       0x41000000 0x10000
+			       0x42000000 0x100000>;
+			bus-range = <0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+				  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+				  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+			interrupt-map-mask = <0x1800 0 0 7>;
+			interrupt-map = <0x1800 0 0 1 &sic 28
+					 0x1800 0 0 2 &sic 29
+					 0x1800 0 0 3 &sic 30
+					 0x1800 0 0 4 &sic 27
+
+					 0x1000 0 0 1 &sic 27
+					 0x1000 0 0 2 &sic 28
+					 0x1000 0 0 3 &sic 29
+					 0x1000 0 0 4 &sic 30
+
+					 0x0800 0 0 1 &sic 30
+					 0x0800 0 0 2 &sic 27
+					 0x0800 0 0 3 &sic 28
+					 0x0800 0 0 4 &sic 29
+
+					 0x0000 0 0 1 &sic 29
+					 0x0000 0 0 2 &sic 30
+					 0x0000 0 0 3 &sic 27
+					 0x0000 0 0 4 &sic 28>;
+		};
+
+		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
+			uart@9000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x9000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+			sci@a000 {
+				compatible = "arm,primecell";
+				reg = <0xa000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <5>;
+				clocks = <&xtal24mhz>;
+				clock-names = "apb_pclk";
+			};
+			mmc@b000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0xb000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000..4f7220b11
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+/ {
+	v2m_fixed_3v3: fixed-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		motherboard-bus {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			arm,v2m-memory-map = "rs1";
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
new file mode 100644
index 000000000..659dcf400
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+/ {
+	bus@40000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: uart@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: uart@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: uart@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: uart@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 000000000..e63c5c0bf
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15";
+	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	wdt@2b060000 {
+		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
+		reg = <0 0x2b060000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&sys_pll>, <&sys_pll>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ffb0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ffb0000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&sys_pll>;
+		clock-names = "apb_pclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: oscclk5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: oscclk6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		sys_pll: oscclk7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		oscclk8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt-cores {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "Cores";
+		};
+
+		amp-cores {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-cores {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 000000000..012d40a72
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15_CA7";
+	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		idle-states {
+			CLUSTER_SLEEP_BIG: cluster-sleep-big {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	wdt@2a490000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0 0x2a490000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ff00000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu-a15 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu-a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
+	};
+
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		oscclk3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: oscclk5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: oscclk6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		oscclk7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		oscclk8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt-a15 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A15 Vcore";
+		};
+
+		volt-a7 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A7 Vcore";
+		};
+
+		amp-a15 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp-a7 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-a15 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+
+		power-a7 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy-a15 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+			label = "A15 Jcore";
+		};
+
+		energy-a7 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
+			label = "A7 Jcore";
+		};
+	};
+
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	etm@2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port5>;
+				};
+			};
+		};
+	};
+
+	smb: bus@8000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
+
+&nor_flash {
+	/*
+	 * Unfortunately, accessing the flash disturbs the CPU idle states
+	 * (suspend) and CPU hotplug of this platform. For this reason, flash
+	 * hardware access is disabled by default on this platform alone.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
new file mode 100644
index 000000000..6fc48016f
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: oscclk0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: oscclk1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: oscclk3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: oscclk5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: bus@8000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x04000000>,
+			 <1 0 0x14000000 0x04000000>,
+			 <2 0 0x18000000 0x04000000>,
+			 <3 0 0x1c000000 0x04000000>,
+			 <4 0 0x0c000000 0x04000000>,
+			 <5 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
new file mode 100644
index 000000000..1317f0f58
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m.dtsi"
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 3 is physically at 0x4c000000 */
+		vram: vram@4c000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x4c000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 1024x768 16bpp @65MHz */
+		max-memory-bandwidth = <95000000>;
+
+		port {
+			clcd_pads_ct: endpoint {
+				remote-endpoint = <&dvi_bridge_in_ct>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+		clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdog_clk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: extsaxiclk {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: clcdclk {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: tcrefclk {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		volt-vd10 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		volt-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		volt-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		volt-vcc1v8 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		volt-ddr2vtt {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		volt-vcc3v3 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	smb: bus@40000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x04000000>,
+			 <1 0 0x44000000 0x04000000>,
+			 <2 0 0x48000000 0x04000000>,
+			 <3 0 0x4c000000 0x04000000>,
+			 <7 0 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..c12a1b8bc
--- /dev/null
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status  = "okay";
+};
+
+&dcu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dcu0_1>;
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	mcp2515can: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_module_3v3 {
+	vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_can_int: can_int {
+			fsl,pins = <
+				VF610_PAD_PTB21__GPIO_43	0x22ed
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
new file mode 100644
index 000000000..cc1e069c4
--- /dev/null
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ *
+ */
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec0;
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_flexcan0: can0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__CAN0_RX	0x31F1
+				VF610_PAD_PTB15__CAN0_TX	0x31F2
+			>;
+		};
+
+		pinctrl_flexcan1: can1grp {
+			fsl,pins = <
+				VF610_PAD_PTB16__CAN1_RX	0x31F1
+				VF610_PAD_PTB17__CAN1_TX	0x31F2
+			>;
+		};
+
+		pinctrl_gpio_ext: gpio_ext {
+			fsl,pins = <
+				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+			>;
+		};
+
+		pinctrl_dcu0_1: dcu0grp_1 {
+			fsl,pins = <
+				VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+				VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+				VF610_PAD_PTE2__DCU0_PCLK	0x1902
+				VF610_PAD_PTE4__DCU0_DE		0x1902
+				VF610_PAD_PTE5__DCU0_R0		0x1902
+				VF610_PAD_PTE6__DCU0_R1		0x1902
+				VF610_PAD_PTE7__DCU0_R2		0x1902
+				VF610_PAD_PTE8__DCU0_R3		0x1902
+				VF610_PAD_PTE9__DCU0_R4		0x1902
+				VF610_PAD_PTE10__DCU0_R5	0x1902
+				VF610_PAD_PTE11__DCU0_R6	0x1902
+				VF610_PAD_PTE12__DCU0_R7	0x1902
+				VF610_PAD_PTE13__DCU0_G0	0x1902
+				VF610_PAD_PTE14__DCU0_G1	0x1902
+				VF610_PAD_PTE15__DCU0_G2	0x1902
+				VF610_PAD_PTE16__DCU0_G3	0x1902
+				VF610_PAD_PTE17__DCU0_G4	0x1902
+				VF610_PAD_PTE18__DCU0_G5	0x1902
+				VF610_PAD_PTE19__DCU0_G6	0x1902
+				VF610_PAD_PTE20__DCU0_G7	0x1902
+				VF610_PAD_PTE21__DCU0_B0	0x1902
+				VF610_PAD_PTE22__DCU0_B1	0x1902
+				VF610_PAD_PTE23__DCU0_B2	0x1902
+				VF610_PAD_PTE24__DCU0_B3	0x1902
+				VF610_PAD_PTE25__DCU0_B4	0x1902
+				VF610_PAD_PTE26__DCU0_B5	0x1902
+				VF610_PAD_PTE27__DCU0_B6	0x1902
+				VF610_PAD_PTE28__DCU0_B7	0x1902
+			>;
+		};
+
+		pinctrl_dspi1: dspi1grp {
+			fsl,pins = <
+				VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+				VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+				VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+				VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_gpio_bl_on: gpio_bl_on {
+			fsl,pins = <
+				VF610_PAD_PTC0__GPIO_45		0x22ef
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x37ff
+				VF610_PAD_PTB15__I2C0_SDA		0x37ff
+			>;
+		};
+
+		pinctrl_i2c0_gpio: i2c0gpiogrp {
+			fsl,pins = <
+				VF610_PAD_PTB14__GPIO_36		0x37ff
+				VF610_PAD_PTB15__GPIO_37		0x37ff
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1182
+				VF610_PAD_PTB1__FTM0_CH1		0x1182
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				VF610_PAD_PTB8__FTM1_CH0		0x1182
+				VF610_PAD_PTB9__FTM1_CH1		0x1182
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+				VF610_PAD_PTB12__UART0_RTS		0x21a2
+				VF610_PAD_PTB13__UART0_CTS		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+
+		pinctrl_usbh1_reg: gpio_usb_vbus {
+			fsl,pins = <
+				VF610_PAD_PTD4__GPIO_83			0x22ed
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
new file mode 100644
index 000000000..088964f8d
--- /dev/null
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
+	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
+
+&touchscreen {
+	vf50-ts-min-pressure = <200>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
new file mode 100644
index 000000000..8af7ed56e
--- /dev/null
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 COM";
+	compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_touchctrl_idle: touchctrl_idle {
+			fsl,pins = <
+				VF610_PAD_PTA18__GPIO_8		0x006d
+				VF610_PAD_PTA19__GPIO_9		0x006c
+				>;
+		};
+
+		pinctrl_touchctrl_default: touchctrl_default {
+			fsl,pins = <
+				VF610_PAD_PTA18__ADC0_SE0	0x0040
+				VF610_PAD_PTA19__ADC0_SE1	0x0040
+				VF610_PAD_PTA16__ADC1_SE0	0x0040
+				VF610_PAD_PTB2__ADC1_SE2	0x0040
+				>;
+		};
+
+		pinctrl_touchctrl_gpios: touchctrl_gpios {
+			fsl,pins = <
+				VF610_PAD_PTA23__GPIO_13	0x22e9
+				VF610_PAD_PTB23__GPIO_93	0x22e9
+				VF610_PAD_PTA22__GPIO_12	0x22e9
+				VF610_PAD_PTA11__GPIO_4		0x22e9
+				>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
new file mode 100644
index 000000000..0c0dd4423
--- /dev/null
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vfxxx.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a5_cpu: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		bus@40000000 {
+
+			intc: interrupt-controller@40003000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				interrupt-parent = <&intc>;
+				reg = <0x40003000 0x1000>,
+				      <0x40002100 0x100>;
+			};
+
+			global_timer: timer@40002200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0x40002200 0x20>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+				interrupt-parent = <&intc>;
+				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
+			};
+		};
+
+		bus@40080000 {
+			pmu@40089000 {
+				compatible = "arm,cortex-a5-pmu";
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-affinity = <&a5_cpu>;
+				reg = <0x40089000 0x1000>;
+			};
+		};
+
+	};
+};
+
+&mscm_ir {
+	interrupt-parent = <&intc>;
+};
+
+&wdoga5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
new file mode 100644
index 000000000..830c85476
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Liebherr BK4 controller";
+	compatible = "lwn,bk4", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: oscillator-audio {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: oscillator-ethernet {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		/* LED D5 */
+		led0: heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc3v3mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	spi-gpio {
+		compatible = "spi-gpio";
+		pinctrl-0 = <&pinctrl_gpio_spi>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* PTD12 ->RPIO[91] */
+		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		/* PTD10 ->RPIO[89] */
+		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		gpio@0 {
+			compatible = "pisosr-gpio";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* PTB18 -> RGPIO[40] */
+			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	bus-num = <0>;
+	status = "okay";
+
+	spidev0@0 {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+		fsl,spi-cs-sck-delay = <200>;
+		fsl,spi-sck-cs-delay = <400>;
+	};
+};
+
+&dspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi3>;
+	bus-num = <3>;
+	status = "okay";
+	spi-slave;
+	#address-cells = <0>;
+
+	slave {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24c256: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	m41t62: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	n25q128a13_4: flash@0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+
+	n25q128a13_2: flash@2 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <2>;
+		reg = <2>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* One_Wire_PSU_EN */
+			VF610_PAD_PTC29__GPIO_102		0x1183
+			/* SPI ENABLE */
+			VF610_PAD_PTB26__GPIO_96		0x1183
+			/* EB control */
+			VF610_PAD_PTE14__GPIO_119		0x1183
+			VF610_PAD_PTE4__GPIO_109		0x1181
+			/* Feedback_Lines */
+			VF610_PAD_PTC31__GPIO_104		0x1181
+			VF610_PAD_PTA7__GPIO_134		0x1181
+			VF610_PAD_PTD9__GPIO_88		0x1181
+			VF610_PAD_PTE1__GPIO_106		0x1183
+			VF610_PAD_PTB2__GPIO_24		0x1181
+			VF610_PAD_PTB3__GPIO_25		0x1181
+			VF610_PAD_PTB1__GPIO_23		0x1181
+			/* SDHC Enable */
+			VF610_PAD_PTE19__GPIO_124		0x1183
+			/* SDHC Overcurrent */
+			VF610_PAD_PTB23__GPIO_93		0x1181
+			/* GPI */
+			VF610_PAD_PTE2__GPIO_107		0x1181
+			VF610_PAD_PTE3__GPIO_108		0x1181
+			VF610_PAD_PTE5__GPIO_110		0x1181
+			VF610_PAD_PTE6__GPIO_111		0x1181
+			/* GPO */
+			VF610_PAD_PTE0__GPIO_105		0x1183
+			VF610_PAD_PTE7__GPIO_112		0x1183
+			/* RS485 Control */
+			VF610_PAD_PTB8__GPIO_30		0x1183
+			VF610_PAD_PTB9__GPIO_31		0x1183
+			VF610_PAD_PTE8__GPIO_113		0x1183
+			/* MPBUS MPB_EN */
+			VF610_PAD_PTE28__GPIO_133		0x1183
+			/* MISC */
+			VF610_PAD_PTE10__GPIO_115		0x1183
+			VF610_PAD_PTE11__GPIO_116		0x1183
+			VF610_PAD_PTE17__GPIO_122		0x1183
+			VF610_PAD_PTC30__GPIO_103		0x1183
+			VF610_PAD_PTB0__GPIO_22		0x1181
+			/* RESETINFO */
+			VF610_PAD_PTE26__GPIO_131		0x1183
+			VF610_PAD_PTD6__GPIO_85		0x1181
+			VF610_PAD_PTE27__GPIO_132		0x1181
+			VF610_PAD_PTE13__GPIO_118		0x1181
+			VF610_PAD_PTE21__GPIO_126		0x1181
+			VF610_PAD_PTE22__GPIO_127		0x1181
+			/* EE_5V_EN */
+			VF610_PAD_PTE18__GPIO_123		0x1183
+			/* EE_5V_OC_N */
+			VF610_PAD_PTE25__GPIO_130		0x1181
+		>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX		0x1181
+			VF610_PAD_PTB15__CAN0_TX		0x1182
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX		0x1181
+			VF610_PAD_PTB17__CAN1_TX		0x1182
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi3: dspi3grp {
+		fsl,pins = <
+			VF610_PAD_PTD10__DSPI3_CS0		0x1181
+			VF610_PAD_PTD11__DSPI3_SIN		0x1181
+			VF610_PAD_PTD12__DSPI3_SOUT		0x1182
+			VF610_PAD_PTD13__DSPI3_SCK		0x1181
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30dd
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30de
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30df
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30dd
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30dd
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30dd
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30dd
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30de
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30de
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30de
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS	0x30dd
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30dd
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30dd
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30dd
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30de
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30de
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			/* Heart bit LED */
+			VF610_PAD_PTE12__GPIO_117	0x1183
+			/* LEDS */
+			VF610_PAD_PTE15__GPIO_120	0x1183
+			VF610_PAD_PTA12__GPIO_5	0x1183
+			VF610_PAD_PTA16__GPIO_6	0x1183
+			VF610_PAD_PTE9__GPIO_114	0x1183
+			VF610_PAD_PTE20__GPIO_125	0x1183
+			VF610_PAD_PTE23__GPIO_128	0x1183
+			VF610_PAD_PTE16__GPIO_121	0x1183
+		>;
+	};
+
+	pinctrl_gpio_spi: pinctrl-gpio-spi {
+		fsl,pins = <
+			VF610_PAD_PTB18__GPIO_40        0x1183
+			VF610_PAD_PTD10__GPIO_89        0x1183
+			VF610_PAD_PTD12__GPIO_91        0x1183
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL               0x34df
+			VF610_PAD_PTA23__I2C2_SDA               0x34df
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x397f
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x397f
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x397f
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x397f
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x397f
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x397f
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x397f
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x397f
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x397f
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x397f
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
new file mode 100644
index 000000000..fb661e8a2
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 on Colibri Evaluation Board";
+	compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
new file mode 100644
index 000000000..607cec2df
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf610.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <50000000>;
+};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
new file mode 100644
index 000000000..703f375d7
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	enet_ext: enet_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h
new file mode 100644
index 000000000..f1e5a7cf5
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-pinfunc.h
@@ -0,0 +1,806 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0	0x0
+#define ALT1	0x1
+#define ALT2	0x2
+#define ALT3	0x3
+#define ALT4	0x4
+#define ALT5	0x5
+#define ALT6	0x6
+#define ALT7	0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1	0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+
+#endif
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
new file mode 100644
index 000000000..dbb5ffcdc
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: mclk_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: eth_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+       };
+};
+
+&iomuxc {
+	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
+		pinctrl_dspi0: dspi0grp {
+			fsl,pins = <
+				VF610_PAD_PTB19__DSPI0_CS0		0x1182
+				VF610_PAD_PTB20__DSPI0_SIN		0x1181
+				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+				VF610_PAD_PTB22__DSPI0_SCK		0x1182
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTA7__GPIO_134	0x219d
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x30d3
+				VF610_PAD_PTB15__I2C0_SDA		0x30d3
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD31__NF_IO15	0x28df
+				VF610_PAD_PTD30__NF_IO14	0x28df
+				VF610_PAD_PTD29__NF_IO13	0x28df
+				VF610_PAD_PTD28__NF_IO12	0x28df
+				VF610_PAD_PTD27__NF_IO11	0x28df
+				VF610_PAD_PTD26__NF_IO10	0x28df
+				VF610_PAD_PTD25__NF_IO9		0x28df
+				VF610_PAD_PTD24__NF_IO8		0x28df
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1582
+				VF610_PAD_PTB1__FTM0_CH1		0x1582
+				VF610_PAD_PTB2__FTM0_CH2		0x1582
+				VF610_PAD_PTB3__FTM0_CH3		0x1582
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTB6__UART2_TX		0x21a2
+				VF610_PAD_PTB7__UART2_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
new file mode 100644
index 000000000..96495d965
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 CFU1 Board";
+	compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-fail {
+			label = "zii:red:fail";
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-status {
+			label = "zii:green:status";
+			gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-debug-a {
+			label = "zii:green:debug_a";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-debug-b {
+			label = "zii:green:debug_b";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc_3v3_mcu";
+		 regulator-min-microvolt = <3300000>;
+		 regulator-max-microvolt = <3300000>;
+	};
+
+	sff: sfp {
+		compatible = "sff,sff";
+		pinctrl-0 = <&pinctrl_optical>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28VDC_IN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some CFU1s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_fc_1000_1";
+					phy-mode = "1000base-x";
+					managed = "in-band-status";
+					sfp = <&sff>;
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		label = "nvm";
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+		label = "nameplate";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30fe
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+			VF610_PAD_PTE3__GPIO_108		0x31c2
+			VF610_PAD_PTE4__GPIO_109		0x31c2
+			VF610_PAD_PTE5__GPIO_110		0x31c2
+			VF610_PAD_PTE6__GPIO_111		0x31c2
+		>;
+	};
+
+	pinctrl_optical: optical-grp {
+		fsl,pins = <
+		/* SFF SD input */
+		VF610_PAD_PTE27__GPIO_132	0x3061
+
+		/* SFF Transmit disable output */
+		VF610_PAD_PTE13__GPIO_118	0x3043
+		>;
+	};
+
+	pinctrl_switch: switch-grp {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x3061
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
new file mode 100644
index 000000000..073f5d196
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+	model = "ZII VF610 Development Board, Rev B";
+	compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610";
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
+			 &gpio0 9  GPIO_ACTIVE_HIGH
+			 &gpio0 24 GPIO_ACTIVE_HIGH
+			 &gpio0 25 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 0>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				eeprom-length = <512>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan0";
+						phy-handle = <&switch0phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&switch0phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&switch0phy2>;
+					};
+
+					switch0port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port6
+							&switch2port9>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "cpu";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch0phy0: switch0phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch0>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+					switch0phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch@0 {
+				compatible = "marvell,mv88e6085";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 1>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				eeprom-length = <512>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan3";
+						phy-handle = <&switch1phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan4";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan5";
+						phy-handle = <&switch1phy2>;
+					};
+
+					switch1port5: port@5 {
+						reg = <5>;
+						label = "dsa";
+						link = <&switch2port9>;
+						phy-mode = "rgmii-txid";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					switch1port6: port@6 {
+						reg = <6>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch0port5>;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy0: switch1phy0@0 {
+						reg = <0>;
+						interrupt-parent = <&switch1>;
+						interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy1: switch1phy0@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy0@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			switch2: switch@0 {
+				compatible = "marvell,mv88e6085";
+				reg = <0>;
+				dsa,member = <0 2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan6";
+						phy-handle = <&switch2phy0>;
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan7";
+						phy-handle = <&switch2phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan8";
+						phy-handle = <&switch2phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "optical3";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 2
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "optical4";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							link-gpios = <&gpio6 3
+							      GPIO_ACTIVE_HIGH>;
+						};
+					};
+
+					switch2port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "rgmii-txid";
+						link = <&switch1port5
+							&switch0port5>;
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch2phy0: phy@0 {
+						reg = <0>;
+					};
+					switch2phy1: phy@1 {
+						reg = <1>;
+					};
+					switch2phy2: phy@2 {
+						reg = <2>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	spi0 {
+		compatible = "spi-gpio";
+		pinctrl-0 = <&pinctrl_gpio_spi0>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
+			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <2>;
+
+		flash@0 {
+			compatible = "m25p128", "jedec,spi-nor";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+		};
+
+		at93c46d@1 {
+			compatible = "atmel,at93c46d";
+			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
+			pinctrl-names = "default";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+			spi-max-frequency = <500000>;
+			spi-cs-high;
+			data-size = <16>;
+			select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	gpio5: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9554_22>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sfp1: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			sfp2: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			sfp3: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			sfp4: eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+	};
+};
+
+&mdio1 {
+	clock-frequency = <5000000>;
+};
+
+&iomuxc {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132	0x33e2
+		>;
+	};
+
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTB22__GPIO_44	0x33e2
+			VF610_PAD_PTB21__GPIO_43	0x33e2
+			VF610_PAD_PTB20__GPIO_42	0x33e1
+			VF610_PAD_PTB19__GPIO_41	0x33e2
+			VF610_PAD_PTB18__GPIO_40	0x33e2
+		>;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x31c2
+			VF610_PAD_PTA19__GPIO_9		0x31c2
+			VF610_PAD_PTB2__GPIO_24		0x31c2
+			VF610_PAD_PTB3__GPIO_25		0x31c2
+		>;
+	};
+
+	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
new file mode 100644
index 000000000..ba2001f37
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610-zii-dev.dtsi"
+
+/ {
+	model = "ZII VF610 Development Board, Rev C";
+	compatible = "zii,vf610dev-c", "zii,vf610dev", "fsl,vf610";
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8  GPIO_ACTIVE_HIGH
+			 &gpio0 9  GPIO_ACTIVE_HIGH
+			 &gpio0 25 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch@0 {
+				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch0>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 0>;
+				eeprom-length = <65536>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "cpu";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan1";
+						phy-handle = <&switch0phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+						phy-handle = <&switch0phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan3";
+						phy-handle = <&switch0phy3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan4";
+						phy-handle = <&switch0phy4>;
+					};
+
+					switch0port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xaui";
+						link = <&switch1port10>;
+					};
+				};
+
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch0phy1: switch0phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch0>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy2: switch0phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch0>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy3: switch0phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch0>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch0phy4: switch0phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch0>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch@0 {
+				compatible = "marvell,mv88e6190";
+				pinctrl-0 = <&pinctrl_gpio_switch1>;
+				pinctrl-names = "default";
+				reg = <0>;
+				dsa,member = <0 1>;
+				eeprom-length = <65536>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+						phy-handle = <&switch1phy1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan6";
+						phy-handle = <&switch1phy2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan7";
+						phy-handle = <&switch1phy3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan8";
+						phy-handle = <&switch1phy4>;
+					};
+
+					port@9 {
+						reg = <9>;
+						label = "sff2";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
+
+					switch1port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xaui";
+						link = <&switch0port10>;
+					};
+				};
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					switch1phy1: switch1phy@1 {
+						reg = <1>;
+						interrupt-parent = <&switch1>;
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy2: switch1phy@2 {
+						reg = <2>;
+						interrupt-parent = <&switch1>;
+						interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy3: switch1phy@3 {
+						reg = <3>;
+						interrupt-parent = <&switch1>;
+						interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					};
+
+					switch1phy4: switch1phy@4 {
+						reg = <4>;
+						interrupt-parent = <&switch1>;
+						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	sff2: sff2 {
+		/* lower */
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		/* upper */
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+	spi-num-chipselects = <2>;
+
+	flash@0 {
+		compatible = "m25p128", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	atzb-rf-233@1 {
+		compatible = "atmel,at86rf233";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctr_atzb_rf_233>;
+
+		spi-max-frequency = <7500000>;
+		reg = <1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio3>;
+		xtal-trim = /bits/ 8 <0x06>;
+
+		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		fsl,spi-cs-sck-delay = <180>;
+		fsl,spi-sck-cs-delay = <250>;
+	};
+};
+
+&i2c0 {
+	/*
+	 * U712
+	 *
+	 * Exposed signals:
+	 *    P1 - WE2_CMD
+	 *    P2 - WE2_CLK
+	 */
+	gpio5: io-expander@18 {
+		compatible = "nxp,pca9557";
+		reg = <0x18>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/*
+	 * U121
+	 *
+	 * Exposed signals:
+	 *    I/O0  - ENET_SWR_EN
+	 *    I/O1  - ESW1_RESETn
+	 *    I/O2  - ARINC_RESET
+	 *    I/O3  - DD1_IO_RESET
+	 *    I/O4  - ESW2_RESETn
+	 *    I/O5  - ESW3_RESETn
+	 *    I/O6  - ESW4_RESETn
+	 *    I/O8  - TP909
+	 *    I/O9  - FEM_SEL
+	 *    I/O10 - WIFI_RESETn
+	 *    I/O11 - PHY_RSTn
+	 *    I/O12 - OPT1_SD
+	 *    I/O13 - OPT2_SD
+	 *    I/O14 - OPT1_TX_DIS
+	 *    I/O15 - OPT2_TX_DIS
+	 */
+	gpio6: sx1503@20 {
+		compatible = "semtech,sx1503q";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx1503_20>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	/*
+	 * U715
+	 *
+	 * Exposed signals:
+	 *     IO0 - WE1_CLK
+	 *     IO1 - WE1_CMD
+	 */
+	gpio7: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		read-only;
+	};
+};
+
+&i2c2 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sff2_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff3_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&gpio0 {
+	eth0_intrp {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "sx1503-irq";
+	};
+};
+
+&gpio3 {
+	eth0_intrp {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "eth0-intrp";
+	};
+};
+
+&fec0 {
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec0_phy_int>;
+
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+		fsl,pins = <
+			VF610_PAD_PTB2__GPIO_24		0x31c2
+			VF610_PAD_PTE27__GPIO_132	0x33e2
+		>;
+	};
+
+
+	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+		fsl,pins = <
+			VF610_PAD_PTB1__GPIO_23		0x219d
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX	0x21a2
+			VF610_PAD_PTA21__UART3_RX	0x21a1
+		>;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x31c2
+			VF610_PAD_PTA19__GPIO_9		0x31c2
+			VF610_PAD_PTB3__GPIO_25		0x31c2
+		>;
+	};
+
+	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
new file mode 100644
index 000000000..f8299f33a
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -0,0 +1,450 @@
+/*
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "vf610.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&pinctrl_usb_vbus>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 6 0>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* VCC_1V5 */
+			      <&adc0 9>, /* VCC_1V8 */
+			      <&adc1 8>, /* VCC_1V0 */
+			      <&adc1 9>; /* VCC_1V2 */
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	ds1682@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	/*
+	 * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+	 * modes, so, spi-max-frequency is limited to 90MHz
+	 */
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <90000000>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+		m25p,fast-read;
+	};
+
+	flash@2 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <90000000>;
+		spi-rx-bus-width = <4>;
+		reg = <2>;
+		m25p,fast-read;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	vbus-supply = <&usb0_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&tempsensor {
+	io-channels = <&adc0 16>;
+};
+
+&iomuxc {
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5	0x00a1
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1	0x1182
+			VF610_PAD_PTB19__DSPI0_CS0	0x1182
+			VF610_PAD_PTB20__DSPI0_SIN	0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT	0x1182
+			VF610_PAD_PTB22__DSPI0_SCK	0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2grp {
+		fsl,pins = <
+			VF610_PAD_PTD31__DSPI2_CS1	0x1182
+			VF610_PAD_PTD30__DSPI2_CS0	0x1182
+			VF610_PAD_PTD29__DSPI2_SIN	0x1181
+			VF610_PAD_PTD28__DSPI2_SOUT	0x1182
+			VF610_PAD_PTD27__DSPI2_SCK	0x1182
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d2
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d3
+			VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+		fsl,pins = <
+			VF610_PAD_PTB22__GPIO_44	0x33e2
+			VF610_PAD_PTB21__GPIO_43	0x33e2
+			VF610_PAD_PTB20__GPIO_42	0x33e1
+			VF610_PAD_PTB19__GPIO_41	0x33e2
+			VF610_PAD_PTB18__GPIO_40	0x33e2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB5__GPIO_27		0x219d
+		>;
+	};
+
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+		fsl,pins = <
+			VF610_PAD_PTB4__GPIO_26		0x219d
+		>;
+	};
+
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+		fsl,pins = <
+			 VF610_PAD_PTE14__GPIO_119	0x31c2
+			 >;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL	0x37ff
+			VF610_PAD_PTB15__I2C0_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c0_gpio: i2c0grp-gpio {
+		fsl,pins = <
+			VF610_PAD_PTB14__GPIO_36	0x31c2
+			VF610_PAD_PTB15__GPIO_37	0x31c2
+		>;
+	};
+
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL	0x37ff
+			VF610_PAD_PTB17__I2C1_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL	0x37ff
+			VF610_PAD_PTA23__I2C2_SDA	0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTD20__GPIO_74	0x31c2
+			 >;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x38c2
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x38c2
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x38c3
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x38c3
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x38c3
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x38c3
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x38c2
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x38c2
+			VF610_PAD_PTD9__QSPI0_B_DATA3	0x38c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2	0x38c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x38c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x38c3
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX	0x21a2
+			VF610_PAD_PTB11__UART0_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX	0x21a2
+			VF610_PAD_PTB24__UART1_RX	0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD23__UART2_TX	0x21a2
+			VF610_PAD_PTD22__UART2_RX	0x21a1
+		>;
+	};
+
+	pinctrl_usb_vbus: pinctrl-usb-vbus {
+		fsl,pins = <
+			VF610_PAD_PTA16__GPIO_6	0x31c2
+		>;
+	};
+
+	pinctrl_usb0_host: usb0-host-grp {
+		fsl,pins = <
+			VF610_PAD_PTD6__GPIO_85		0x0062
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
new file mode 100644
index 000000000..040a1f8b6
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -0,0 +1,846 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2016-2018 Zodiac Inflight Innovations
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SCU4 AIB";
+	compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-gpio";
+		pinctrl-0 = <&pinctrl_mdio_mux>;
+		pinctrl-names = "default";
+		gpios = <&gpio4 4  GPIO_ACTIVE_HIGH
+			 &gpio4 5  GPIO_ACTIVE_HIGH
+			 &gpio3 30 GPIO_ACTIVE_HIGH
+			 &gpio3 31 GPIO_ACTIVE_HIGH>;
+		mdio-parent-bus = <&mdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio_mux_1: mdio@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0: switch0@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 0>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "cpu";
+						ethernet = <&fec1>;
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "aib2main_1";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "aib2main_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_1000_5";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_cu_1000_6";
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_cu_1000_4";
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_cu_1000_7";
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "modem_pic";
+
+						fixed-link {
+							speed = <100>;
+							full-duplex;
+						};
+					};
+
+					switch0port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port10
+							&switch3port10
+							&switch2port10>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_2: mdio@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1: switch1@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 1>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+						label = "eth_cu_1000_3";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "eth_cu_100_2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_cu_100_3";
+					};
+
+					switch1port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch3port10
+							&switch2port10>;
+					};
+
+					switch1port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch0port10>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_4: mdio@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2: switch2@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 2>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_2";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff1>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_3";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff2>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_4";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff3>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "eth_fc_1000_5";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff4>;
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "eth_fc_1000_6";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff5>;
+					};
+
+					port@7 {
+						reg = <7>;
+						label = "eth_fc_1000_7";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff6>;
+					};
+
+					port@9 {
+						reg = <9>;
+						label = "eth_fc_1000_1";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff0>;
+					};
+
+					switch2port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch3port9
+							&switch1port9
+							&switch0port10>;
+					};
+				};
+			};
+		};
+
+		mdio_mux_8: mdio@8 {
+			reg = <8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch3: switch3@0 {
+				compatible = "marvell,mv88e6190";
+				reg = <0>;
+				dsa,member = <0 3>;
+				eeprom-length = <65536>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@2 {
+						reg = <2>;
+						label = "eth_fc_1000_8";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "eth_fc_1000_9";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "eth_fc_1000_10";
+						phy-mode = "1000base-x";
+						managed = "in-band-status";
+						sfp = <&sff9>;
+					};
+
+					switch3port9: port@9 {
+						reg = <9>;
+						label = "dsa";
+						phy-mode = "2500base-x";
+						link = <&switch2port10>;
+					};
+
+					switch3port10: port@10 {
+						reg = <10>;
+						label = "dsa";
+						phy-mode = "xgmii";
+						link = <&switch1port9
+							&switch0port10>;
+					};
+				};
+			};
+		};
+	};
+
+	sff0: sff0 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff0_i2c>;
+		los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff1: sff1 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff1_i2c>;
+		los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff2: sff2 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff2_i2c>;
+		los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff3: sff3 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff3_i2c>;
+		los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff4: sff4 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff4_i2c>;
+		los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff5: sff5 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff5_i2c>;
+		los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff6: sff6 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff6_i2c>;
+		los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff7: sff7 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff7_i2c>;
+		los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff8: sff8 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff8_i2c>;
+		los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	sff9: sff9 {
+		compatible = "sff,sff";
+		i2c-bus = <&sff9_i2c>;
+		los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dspi0 {
+	pinctrl-0 = <&pinctrl_dspi0>;
+	pinctrl-names = "default";
+	bus-num = <0>;
+	status = "okay";
+
+	adc@5 {
+		compatible = "holt,hi8435";
+		reg = <5>;
+		gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-1";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		   speed = <100>;
+		   full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio5: io-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	temp-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+
+	elapsed-time-recorder@6b {
+		compatible = "dallas,ds1682";
+		reg = <0x6b>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	gpio9: io-expander@20 {
+		compatible = "semtech,sx1503q";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sx1503_20>;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	temp-sensor@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+
+	temp-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	gpio7: io-expander@23 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x23>;
+	};
+
+	adc@4a {
+		compatible = "adi,adt7411";
+		reg = <0x4a>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		sff0_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff1_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff2_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff3_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff4_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		pinctrl-names = "default";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		sff5_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sff6_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sff7_i2c: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		sff8_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sff9_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB13__DSPI0_CS4		0x1182
+			VF610_PAD_PTB12__DSPI0_CS5		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi2: dspi2gpio {
+		fsl,pins = <
+			VF610_PAD_PTD30__GPIO_64		0x33e2
+			VF610_PAD_PTD29__GPIO_65		0x33e1
+			VF610_PAD_PTD28__GPIO_66		0x33e2
+			VF610_PAD_PTD27__GPIO_67		0x33e2
+			VF610_PAD_PTD26__GPIO_68		0x31c2
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL		0x37ff
+			VF610_PAD_PTA23__I2C2_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			 VF610_PAD_PTB26__GPIO_96		0x31c2
+		   >;
+	};
+
+	pinctrl_mdio_mux: pinctrl-mdio-mux {
+		fsl,pins = <
+			VF610_PAD_PTE27__GPIO_132		0x31c2
+			VF610_PAD_PTE28__GPIO_133		0x31c2
+			VF610_PAD_PTE21__GPIO_126		0x31c2
+			VF610_PAD_PTE22__GPIO_127		0x31c2
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD7__QSPI0_B_QSCK		0x31c3
+			VF610_PAD_PTD8__QSPI0_B_CS0		0x31ff
+			VF610_PAD_PTD9__QSPI0_B_DATA3		0x31c3
+			VF610_PAD_PTD10__QSPI0_B_DATA2		0x31c3
+			VF610_PAD_PTD11__QSPI0_B_DATA1		0x31c3
+			VF610_PAD_PTD12__QSPI0_B_DATA0		0x31c3
+		>;
+	};
+
+	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+		fsl,pins = <
+			VF610_PAD_PTD31__GPIO_63		0x219d
+			>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+			VF610_PAD_PTB25__UART1_RTS		0x21a2	/* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2 /* Used as DE signal for the RS-485 transceiver */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
new file mode 100644
index 000000000..6c6ec46fd
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SPB4 board
+ *
+ * SPB - Seat Power Box
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SPB4 Board";
+	compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 28V_SW   */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&wdoga5 {
+       status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA30__UART3_TX		0x21a2
+			VF610_PAD_PTA31__UART3_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
new file mode 100644
index 000000000..73fdace4c
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB DTU board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * DTU - Digital Tapping Unit
+ *
+ * Copyright (C) 2015-2019 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB DTU Board";
+	compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_100_3";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@9 {
+					reg = <9>;
+					label = "eth_cu_1000_2";
+					phy-handle = <&phy9>;
+					phy-mode = "sgmii";
+					managed = "in-band-status";
+				};
+			};
+
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy9: phy9@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					pinctrl-0 = <&pinctrl_gpio_phy9>;
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio2>;
+					interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* On SSMB */
+	temperature-sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	/* On DSB */
+	temperature-sensor@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+		fsl,pins = <
+			VF610_PAD_PTB24__GPIO_94		0x219d
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
new file mode 100644
index 000000000..fe600ab2e
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB SPU3 board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * SPU - Seat Power Unit
+ *
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB SPU3 Board";
+	compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	supply-voltage-monitor {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 8>, /* 12V_MAIN */
+			      <&adc0 9>, /* +3.3V    */
+			      <&adc1 8>, /* VCC_1V5  */
+			      <&adc1 9>; /* VCC_1V2  */
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some SPU3s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-sdio;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: io-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
+&snvsrtc {
+	status = "disabled";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&wdoga5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
new file mode 100644
index 000000000..956182d08
--- /dev/null
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+
+#include "vf500.dtsi"
+
+&a5_cpu {
+	next-level-cache = <&L2>;
+};
+
+&aips0 {
+	L2: cache-controller@40006000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x40006000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
new file mode 100644
index 000000000..2c2db47af
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+
+	chosen {
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
+	};
+
+	memory@8c000000 {
+		device_type = "memory";
+		reg = <0x8c000000 0x3000000>;
+	};
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts
new file mode 100644
index 000000000..f7474c11a
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				VF610_PAD_PTA20__UART3_TX		0x21a2
+				VF610_PAD_PTA21__UART3_RX		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
new file mode 100644
index 000000000..76bbfd5e3
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+};
+
+&mscm_ir {
+	interrupt-parent = <&nvic>;
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
new file mode 100644
index 000000000..2259d11af
--- /dev/null
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -0,0 +1,756 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		ethernet0 = &fec0;
+		ethernet1 = &fec1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	fxosc: fxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sxosc: sxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&src>;
+		offset = <0x0>;
+		mask = <0x1000>;
+	};
+
+	tempsensor: iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 16>, <&adc1 16>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&mscm_ir>;
+		ranges;
+
+		aips0: bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
+			ranges;
+
+			mscm_cpucfg: cpucfg@40001000 {
+				compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+				reg = <0x40001000 0x800>;
+			};
+
+			mscm_ir: interrupt-controller@40001800 {
+				compatible = "fsl,vf610-mscm-ir";
+				reg = <0x40001800 0x400>;
+				fsl,cpucfg = <&mscm_cpucfg>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+						<9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+				status = "disabled";
+			};
+
+			can0: flexcan@40020000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x40020000 0x4000>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN0>,
+					 <&clks VF610_CLK_FLEXCAN0>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART2>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART3>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			dspi0: spi@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <6>;
+				dmas = <&edma1 1 12>,
+					<&edma1 1 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi1: spi@4002d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002d000 0x1000>;
+				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI1>;
+				clock-names = "dspi";
+				spi-num-chipselects = <4>;
+				dmas = <&edma1 1 14>,
+					<&edma1 1 15>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai0: sai@4002f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 17>,
+					<&edma0 0 16>;
+				status = "disabled";
+			};
+
+			sai1: sai@40030000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 19>,
+					<&edma0 0 18>;
+				status = "disabled";
+			};
+
+			sai2: sai@40031000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40031000 0x1000>;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI2>,
+					<&clks VF610_CLK_SAI2_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 21>,
+					<&edma0 0 20>;
+				status = "disabled";
+			};
+
+			sai3: sai@40032000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 1 9>,
+					<&edma0 1 8>;
+				status = "disabled";
+			};
+
+			pit: pit@40037000 {
+				compatible = "fsl,vf610-pit";
+				reg = <0x40037000 0x1000>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_PIT>;
+				clock-names = "pit";
+			};
+
+			pwm0: pwm@40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@40039000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40039000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM1>,
+					<&clks VF610_CLK_FTM1_EXT_SEL>,
+					<&clks VF610_CLK_FTM1_FIX_SEL>,
+					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			tcon0: timing-controller@4003d000 {
+				compatible = "fsl,vf610-tcon";
+				reg = <0x4003d000 0x1000>;
+				clocks = <&clks VF610_CLK_TCON0>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			wdoga5: wdog@4003e000 {
+				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+				reg = <0x4003e000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_WDT>;
+				clock-names = "wdog";
+				status = "disabled";
+			};
+
+			qspi0: spi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI0_EN>,
+					<&clks VF610_CLK_QSPI0>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+			};
+
+			gpio0: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x40049000 0x1000 0x400ff000 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 0 32>;
+			};
+
+			gpio1: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 32 32>;
+			};
+
+			gpio2: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 64 32>;
+			};
+
+			gpio3: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 96 32>;
+			};
+
+			gpio4: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 128 7>;
+			};
+
+			anatop: anatop@40050000 {
+				compatible = "fsl,vf610-anatop", "syscon";
+				reg = <0x40050000 0x400>;
+			};
+
+			usbphy0: usbphy@40050800 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050800 0x400>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@40050c00 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050c00 0x400>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			dcu0: dcu@40058000 {
+				compatible = "fsl,vf610-dcu";
+				reg = <0x40058000 0x1200>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DCU0>,
+					<&clks VF610_CLK_DCU0_DIV>;
+				clock-names = "dcu", "pix";
+				fsl,tcon = <&tcon0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@40067000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40067000 0x1000>;
+				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 52>,
+					<&edma0 0 53>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			clks: ccm@4006b000 {
+				compatible = "fsl,vf610-ccm";
+				reg = <0x4006b000 0x1000>;
+				clocks = <&sxosc>, <&fxosc>;
+				clock-names = "sxosc", "fxosc";
+				#clock-cells = <1>;
+			};
+
+			usbdev0: usb@40034000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x40034000 0x800>;
+				interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				fsl,usbphy = <&usbphy0>;
+				fsl,usbmisc = <&usbmisc0 0>;
+				dr_mode = "peripheral";
+				status = "disabled";
+			};
+
+			usbmisc0: usb@40034800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x40034800 0x200>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				status = "disabled";
+			};
+
+			src: src@4006e000 {
+				compatible = "fsl,vf610-src", "syscon";
+				reg = <0x4006e000 0x1000>;
+				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips1: bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
+			ranges;
+
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				dma-channels = <32>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+						<11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@400a5000 {
+				compatible = "fsl,vf610-ocotp", "syscon";
+				reg = <0x400a5000 0x1000>;
+				clocks = <&clks VF610_CLK_OCOTP>;
+			};
+
+			snvs0: snvs@400a7000 {
+			    compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x400a7000 0x2000>;
+
+				snvsrtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs0>;
+					offset = <0x34>;
+					interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks VF610_CLK_SNVS>;
+					clock-names = "snvs-rtc";
+				};
+			};
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_UART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			dspi2: spi@400ac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ac000 0x1000>;
+				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI2>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 10>,
+					<&edma1 0 11>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			dspi3: spi@400ad000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ad000 0x1000>;
+				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI3>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				dmas = <&edma1 0 12>,
+					<&edma1 0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				#io-channel-cells = <1>;
+				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
+			};
+
+			esdhc0: esdhc@400b1000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b1000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x1000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			usbh1: usb@400b4000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x400b4000 0x800>;
+				interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc1: usb@400b4800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x400b4800 0x200>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				status = "disabled";
+			};
+
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			qspi1: spi@400c4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_QSPI1_EN>,
+					<&clks VF610_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			dac0: dac@400cc000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cc000 1000>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC0>;
+				status = "disabled";
+			};
+
+			dac1: dac@400cd000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cd000 1000>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC1>;
+				status = "disabled";
+			};
+
+			fec0: ethernet@400d0000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d0000 0x1000>;
+				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			fec1: ethernet@400d1000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d1000 0x1000>;
+				interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			can1: flexcan@400d4000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x400d4000 0x4000>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_FLEXCAN1>,
+					 <&clks VF610_CLK_FLEXCAN1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
+
+			i2c2: i2c@400e6000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e6000 0x1000>;
+				interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C2>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 36>,
+					<&edma0 1 37>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@400e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x400e7000 0x1000>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_I2C3>;
+				clock-names = "ipg";
+				dmas = <&edma0 1 38>,
+					<&edma0 1 39>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@400f0000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x400f0000 0x9000>;
+				ranges = <0 0x400f0000 0x9000>;
+				clocks = <&clks VF610_CLK_CAAM>;
+				clock-names = "ipg";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
new file mode 100644
index 000000000..e9f55bd30
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/dts-v1/;
+/include/ "vt8500.dtsi"
+
+/ {
+	model = "Benign BV07 Netbook";
+};
+
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
new file mode 100644
index 000000000..b7e09eff5
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * vt8500.dtsi - Device tree file for VIA VT8500 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "via,vt8500";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		intc: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "via,vt8500-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "via,vt8500-fb";
+			reg = <0xd800e400 0x400>;
+			interrupts = <12>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		uart2: serial@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&clkuart2>;
+			status = "disabled";
+		};
+
+		uart3: serial@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&clkuart3>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
new file mode 100644
index 000000000..2d77c0876
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/dts-v1/;
+/include/ "wm8505.dtsi"
+
+/ {
+	model = "Wondermedia WM8505 Netbook";
+};
+
+&fb {
+	bits-per-pixel = <32>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
new file mode 100644
index 000000000..168cd12b0
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "wm,wm8505";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+ 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+ 	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8505-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20c>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+
+				clkuart4: uart4 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <22>;
+				};
+
+				clkuart5: uart5 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <23>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007100 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007100 0x200>;
+			interrupts = <1>;
+		};
+
+		uhci@d8007300 {
+			compatible = "platform-uhci";
+			reg = <0xd8007300 0x200>;
+			interrupts = <0>;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		uart2: serial@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&clkuart2>;
+			status = "disabled";
+		};
+
+		uart3: serial@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&clkuart3>;
+			status = "disabled";
+		};
+
+		uart4: serial@d8370000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8370000 0x1040>;
+			interrupts = <31>;
+			clocks = <&clkuart4>;
+			status = "disabled";
+		};
+
+		uart5: serial@d8380000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8380000 0x1040>;
+			interrupts = <30>;
+			clocks = <&clkuart5>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
new file mode 100644
index 000000000..f6a42149a
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/dts-v1/;
+/include/ "wm8650.dtsi"
+
+/ {
+	model = "Wondermedia WM8650-MID Tablet";
+};
+
+&fb {
+	bits-per-pixel = <16>;
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
new file mode 100644
index 000000000..bc057b6f7
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "wm,wm8650";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+ 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8650-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20c>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x210>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+ 					#clock-cells = <0>;
+ 					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+ 				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8750-apc8750.dts b/arch/arm/boot/dts/wm8750-apc8750.dts
new file mode 100644
index 000000000..136e812bc
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750-apc8750.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8750-apc8750.dts
+ *  - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+	model = "VIA APC8750";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c>;
+
+	i2c: i2c {
+		wm,pins = <168 169 170 171>;
+		wm,function = <2>;	/* alt */
+		wm,pull = <2>;	/* pull-up */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
new file mode 100644
index 000000000..33aeb3749
--- /dev/null
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "wm,wm8750";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8750-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20C>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x210>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <24>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <25>;
+				};
+
+                                clkuart2: uart2 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <26>;
+                                };
+
+                                clkuart3: uart3 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <27>;
+                                };
+
+                                clkuart4: uart4 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <28>;
+                                };
+
+                                clkuart5: uart5 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <29>;
+                                };
+
+				clkpwm: pwm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+					enable-reg = <0x250>;
+					enable-bit = <17>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x330>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x250>;
+					enable-bit = <0>;
+				};
+
+				clki2c0: i2c0clk {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x3A0>;
+					enable-reg = <0x250>;
+					enable-bit = <8>;
+				};
+
+				clki2c1: i2c1clk {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x3A4>;
+					enable-reg = <0x250>;
+					enable-bit = <9>;
+				};
+			};
+		};
+
+		pwm: pwm@d8220000 {
+			#pwm-cells = <3>;
+			compatible = "via,vt8500-pwm";
+			reg = <0xd8220000 0x100>;
+			clocks = <&clkpwm>;
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8008d00 {
+			compatible = "platform-uhci";
+			reg = <0xd8008d00 0x200>;
+			interrupts = <26>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+                uart2: serial@d8210000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8210000 0x1040>;
+                        interrupts = <47>;
+                        clocks = <&clkuart2>;
+			status = "disabled";
+                };
+
+                uart3: serial@d82c0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82c0000 0x1040>;
+                        interrupts = <50>;
+                        clocks = <&clkuart3>;
+			status = "disabled";
+                };
+
+                uart4: serial@d8370000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8370000 0x1040>;
+                        interrupts = <30>;
+                        clocks = <&clkuart4>;
+			status = "disabled";
+                };
+
+                uart5: serial@d8380000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8380000 0x1040>;
+                        interrupts = <43>;
+                        clocks = <&clkuart5>;
+			status = "disabled";
+                };
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x1000>;
+			interrupts = <20 21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
+		i2c_0: i2c@d8280000 {
+			compatible = "wm,wm8505-i2c";
+			reg = <0xd8280000 0x1000>;
+			interrupts = <19>;
+			clocks = <&clki2c0>;
+			clock-frequency = <400000>;
+		};
+
+		i2c_1: i2c@d8320000 {
+			compatible = "wm,wm8505-i2c";
+			reg = <0xd8320000 0x1000>;
+			interrupts = <18>;
+			clocks = <&clki2c1>;
+			clock-frequency = <400000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts
new file mode 100644
index 000000000..c7a6fe0ce
--- /dev/null
+++ b/arch/arm/boot/dts/wm8850-w70v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8850-w70v2.dts
+ *  - Device tree file for Wondermedia WM8850 Tablet
+ *  - 'W70-V2' mainboard
+ *  - HongLianYing 'HLY070ML268-21A' 7" LCD panel
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/dts-v1/;
+/include/ "wm8850.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wondermedia WM8850-W70v2 Tablet";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+
+		brightness-levels = <0 40 60 80 100 130 190 255>;
+		default-brightness-level = <5>;
+	};
+};
+
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
new file mode 100644
index 000000000..65c927105
--- /dev/null
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "wm,wm8850";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8850-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x20c>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x210>;
+				};
+
+				pllf: pllf {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x214>;
+				};
+
+				pllg: pllg {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x218>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <24>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <25>;
+				};
+
+                                clkuart2: uart2 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <26>;
+                                };
+
+                                clkuart3: uart3 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <27>;
+                                };
+
+				clkpwm: pwm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+					enable-reg = <0x250>;
+					enable-bit = <17>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x330>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x250>;
+					enable-bit = <0>;
+				};
+			};
+		};
+
+		fb: fb@d8051700 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8051700 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		pwm: pwm@d8220000 {
+			#pwm-cells = <3>;
+			compatible = "via,vt8500-pwm";
+			reg = <0xd8220000 0x100>;
+			clocks = <&clkpwm>;
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8008d00 {
+			compatible = "platform-uhci";
+			reg = <0xd8008d00 0x200>;
+			interrupts = <26>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+                uart2: serial@d8210000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8210000 0x1040>;
+                        interrupts = <47>;
+                        clocks = <&clkuart2>;
+			status = "disabled";
+                };
+
+                uart3: serial@d82c0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82c0000 0x1040>;
+                        interrupts = <50>;
+                        clocks = <&clkuart3>;
+			status = "disabled";
+                };
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x1000>;
+			interrupts = <20 21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+                };
+	};
+};
diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts
new file mode 100644
index 000000000..384cd92f1
--- /dev/null
+++ b/arch/arm/boot/dts/xenvm-4.2.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xen Virtual Machine for unprivileged guests
+ *
+ * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "XENVM-4.2";
+	compatible = "xen,xenvm-4.2", "xen,xenvm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		/* this field is going to be adjusted by the hypervisor */
+		bootargs = "console=hvc0 root=/dev/xvda";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	psci {
+		compatible      = "arm,psci";
+		method          = "hvc";
+		cpu_off         = <1>;
+		cpu_on          = <2>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0x80000000 0 0x08000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x100>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	hypervisor {
+		compatible = "xen,xen-4.2", "xen,xen";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0xb0000000 0 0x20000>;
+		/* this field is going to be adjusted by the hypervisor */
+		interrupts = <1 15 0xf08>;
+	};
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+	};
+};
diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts
new file mode 100644
index 000000000..bd9400840
--- /dev/null
+++ b/arch/arm/boot/dts/zx296702-ad1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "zx296702.dtsi"
+
+/ {
+	model = "ZTE ZX296702 AD1 Board";
+	compatible = "zte,zx296702-ad1", "zte,zx296702";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x50000000 0x20000000>;
+	};
+};
+
+&mmc0 {
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
new file mode 100644
index 000000000..f378c661b
--- /dev/null
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/zx296702-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "zte,zx296702-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <1>;
+		};
+	};
+
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		matrix: bus-matrix@400000 {
+			compatible = "zte,zx-bus-matrix";
+			reg = <0x00400000 0x1000>;
+		};
+
+		intc: interrupt-controller@801000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			reg = <0x00801000 0x1000>,
+			      <0x00800100 0x100>;
+		};
+
+		global_timer: timer@8000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x00800200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&intc>;
+			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
+		};
+
+		l2cc: cache-controller@c00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00c00000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,data-latency = <1 1 1>;
+			arm,tag-latency = <1 1 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+		};
+
+		pcu: pcu@a0008000 {
+			compatible = "zte,zx296702-pcu";
+			reg = <0xa0008000 0x1000>;
+		};
+
+		topclk: topclk@9800000 {
+			compatible = "zte,zx296702-topcrm-clk";
+			reg = <0x09800000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp1clk: lsp1clk@9400000 {
+			compatible = "zte,zx296702-lsp1crpm-clk";
+			reg = <0x09400000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp0clk: lsp0clk@b000000 {
+			compatible = "zte,zx296702-lsp0crpm-clk";
+			reg = <0x0b000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@9405000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09405000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART0_WCLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@9406000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09406000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART1_WCLK>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@9408000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x09408000 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>,
+				 <&lsp1clk ZX296702_SDMMC0_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b003000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0b003000 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>,
+				 <&lsp0clk ZX296702_SDMMC1_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysctrl: sysctrl@a0007000 {
+			compatible = "zte,sysctrl", "syscon";
+			reg = <0xa0007000 0x1000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
new file mode 100644
index 000000000..db3899b07
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,zynq-7000";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&devcfg>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+	};
+
+	pmu@f8891000 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 5 4>, <0 6 4>;
+		interrupt-parent = <&intc>;
+		reg = <0xf8891000 0x1000>,
+		      <0xf8893000 0x1000>;
+	};
+
+	regulator_vccpint: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+		clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+		clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+		};
+		in-ports {
+			/* replicator input port */
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	amba: amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		adc: adc@f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can@e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio@e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		i2c0: i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller@f8f02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mc: memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
+		uart0: serial@e0000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+		};
+
+		uart1: serial@e0001000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+		};
+
+		spi0: spi@e0006000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0006000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 26 4>;
+			clocks = <&clkc 25>, <&clkc 34>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@e0007000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0007000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 49 4>;
+			clocks = <&clkc 26>, <&clkc 35>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem0: ethernet@e000b000 {
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000b000 0x1000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "cdns,zynq-gem", "cdns,gem";
+			reg = <0xe000c000 0x1000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sdhci0: mmc@e0100000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 21>, <&clkc 32>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 24 4>;
+			reg = <0xe0100000 0x1000>;
+		};
+
+		sdhci1: mmc@e0101000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 22>, <&clkc 33>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 47 4>;
+			reg = <0xe0101000 0x1000>;
+		};
+
+		slcr: slcr@f8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+
+			rstc: rstc@200 {
+				compatible = "xlnx,zynq-reset";
+				reg = <0x200 0x48>;
+				#reset-cells = <1>;
+				syscon = <&slcr>;
+			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
+		};
+
+		dmac_s: dmac@f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <4>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 8 4>;
+			clocks = <&clkc 12>;
+			clock-names = "ref_clk";
+			syscon = <&slcr>;
+		};
+
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
+		ttc0: timer@f8001000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8001000 0x1000>;
+		};
+
+		ttc1: timer@f8002000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8002000 0x1000>;
+		};
+
+		scutimer: timer@f8f00600 {
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0x301>;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xf8f00600 0x20>;
+			clocks = <&clkc 4>;
+		};
+
+		usb0: usb@e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog@f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		etb@f8801000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0xf8801000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@f8803000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xf8803000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@f8804000 {
+			compatible = "arm,coresight-static-funnel", "arm,primecell";
+			reg = <0xf8804000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+			/* funnel output ports */
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					funnel0_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel0_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel0_in_port2: endpoint {
+					};
+				};
+				/* The other input ports are not connect to anything */
+			};
+		};
+
+		ptm@f889c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889c000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@f889d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889d000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
new file mode 100644
index 000000000..8b9ab9bba
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx CC108 board";
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
new file mode 100644
index 000000000..6ed84fb15
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet MicroZed board";
+	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
+
+&pinctrl0 {
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
new file mode 100644
index 000000000..54592aeb9
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Derived from zynq-zed.dts:
+ *
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *  Copyright (C) 2013 Xilinx
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Adapteva Parallella board";
+	compatible = "adapteva,parallella", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&clkc {
+	fclk-enable = <0xf>;
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		/* Marvell 88E1318 */
+		compatible = "ethernet-phy-id0141.0e90",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		device_type = "ethernet-phy";
+		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
+		                   <0x3 0x11 0xfff0 0xa>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	isl9305: isl9305@68 {
+		compatible = "isil,isl9305";
+		reg = <0x68>;
+
+		regulators {
+			dcd1 {
+				regulator-name = "VDD_DSP";
+				regulator-always-on;
+			};
+			dcd2 {
+				regulator-name = "1P35V";
+				regulator-always-on;
+			};
+			ldo1 {
+				regulator-name = "VDD_ADJ";
+			};
+			ldo2 {
+				regulator-name = "VDD_GPIO";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
new file mode 100644
index 000000000..27cd6cb52
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC702 board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			wakeup-source;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "right";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@34 {
+				compatible = "ti,ucd9248";
+				reg = <0x34>;
+			};
+			hwmon@35 {
+				compatible = "ti,ucd9248";
+				reg = <0x35>;
+			};
+			hwmon@36 {
+				compatible = "ti,ucd9248";
+				reg = <0x36>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
new file mode 100644
index 000000000..77943c16d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC706 board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			adv7511: hdmi-tx@39 {
+				compatible = "adi,adv7511";
+				reg = <0x39>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "yuv422";
+				adi,input-clock = "1x";
+				adi,input-style = <3>;
+				adi,input-justification = "evenly";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000..0dd352289
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM010 board";
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@1 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "data";
+				reg = <0x0 0x100000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
new file mode 100644
index 000000000..b7f65862c
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM011 board";
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
new file mode 100644
index 000000000..d2359b789
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM012 board";
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom0: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom1: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
new file mode 100644
index 000000000..4ae2c85df
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Xilinx ZC770 XM013 board";
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+		spi1 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: eeprom@2 {
+		at25,byte-len = <8192>;
+		at25,addr-mode = <2>;
+		at25,page-size = <32>;
+
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
new file mode 100644
index 000000000..6a5a93aa6
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Avnet ZedBoard board";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts
new file mode 100644
index 000000000..5ec616ebc
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zturn.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ *  Based on zynq-zed.dts which is:
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board";
+	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		usr-led1 {
+			label = "usr-led1";
+			gpios = <&gpio0 0x0 0x1>;
+			default-state = "off";
+		};
+
+		usr-led2 {
+			label = "usr-led2";
+			gpios = <&gpio0 0x9 0x1>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		K1 {
+			label = "K1";
+			gpios = <&gpio0 0x32 0x1>;
+			linux,code = <0x66>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	stlm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	accelerometer@53 {
+		compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
+		reg = <0x53>;
+		interrupt-parent = <&intc>;
+		interrupts = <0x0 0x1e 0x4>;
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts
new file mode 100644
index 000000000..357b78a5c
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zybo-z7.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Digilent Zybo Z7 board";
+	compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		ld4 {
+			label = "zynq-zybo-z7:green:ld4";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
new file mode 100644
index 000000000..755f6f109
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	model = "Digilent Zybo board";
+	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};